Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DCC 20053-Assignment 2 Set 1 Jun 2021

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

CLO/GSA MARKS

CLO 2 /80

CLO 3 /20
DCC 20053 & MECHANICS OF CIVIL ENGINEERING
STRUCTURES
TOTAL /95

NAME: TIME ALLOCATION: 4.5 HOUR


(NF2F)
MATRIX NO: DATE:

PROGRAM: DKA CLASS:DKA 2A /2B


DIRECTION:Answer all questions .

INSTRUCTION: This assesment contains CLO 2 and CLO 3. All assesments will be
evaluated through the calculation of the worksheet and rubrics.Compile all the
answer.
Penilaian ini mengandungi CLO 2 dan CLO 3. Semua penilaian akan di nilai melalui
pengiraan dan rubrik.

QUESTION 1
SOALAN 1

A simply support beam as shown in Figure 1 is subjected to a uniformly distributed


load and point load.
Satu rasuk tupang mudah di tunjukkan pada rajah 1 dikenakan beban teragih
seragam dan beban titik.

Figure 1

i. Calculate the vertical reaction force of the beam


[ 2 marks ]
Kirakan tindakbalas arah menengak rasuk
[ 2 markah]

ii. Complete the moment, slope and deflection equation of the beam
[ 5 marks ]
Lengkapkan persamaan momen, kecerunan dan lenturan untuk rasuk di atas.

iii. Express the slope and deflection at point B by using Macaulay Method in term
of EI [10 marks]
Nyatakan kecerunan dan lenturan di titik B dengan menggunakan kaedah
Macaulay dalam sebutan EI.

iv. Sketch moment area diagram for loaded beam


[5 marks]
Lakarkan gambarajah momen bagi setiap beban yang bertindak di atas rasuk

v. Determine the slope and deflection at point B using Moment Area Method in
term of EI.
[8 marks]
Dapatkan kecerunan dan pesongan di titik B menggunakan Kaedah Luas
Momen dalam sebutan EI

CLO 2(C4),CLO 3 (P3)

QUESTION 2
SOALAN 2

Figure 2.

A Cantilever beam with I cross section as shown in Figure 2.


Rasuk julur diatas dengan keratan I seperti yang ditunjukkan di dalam Rajah 2.

i. Calculate reaction at support D


[ 3 marks ]
Kirakan tindakbalas di penyokong D
ii. Complete the moment, slope and deflection equation of the beam
[ 4 marks ]
Lengkapkan persamaan momen, kecerunan dan pesongan bagi rasuk

iii. Express the slope and deflection at point F by using Macaulay Method in term EI
Nyatakan kecerunan dan lenturan di titik F dengan menggunakan kaedah
Macaulay dalam sebutan EI

[10 marks]

CLO 2(C4)

QUESTION 3
SOALAN 3
Use Macaulay Method to determine the value of slope and deflection at 2 m from
free end of cantilever beam due to the imposed load as shown in Figure 3. The
material of beam has modulus of elasticity as 200GPa. The beam cross section is T-
shaped with flange width as 150 mm and flange thickness 10mm, web height as 120
mm and web thickness as 8mm.
Dengan menggunakan Kaedah Macaulay untuk mendapatkan nilai kecerunan dan
pesongan di 2 m dari hujung bebas rasuk julur yang dikenakan daya seperti
ditunjukkan pada rajah 3 di bawah.Diberi modulus elastik adalah
200Gpa.Keratanrentas berbentuk T dengan lebar bebibir ialah 150 mm and
ketebalan bebibir ialah 10 mm , tinggi web ialah 120 mm dan ketebalan web ialah 8
mm.

Figure 3

[20 marks]

CLO 2(C4)

You might also like