Hooke'S Law & Springs - Phet Simulation: Name: Date: 01/29/21 11 A
Hooke'S Law & Springs - Phet Simulation: Name: Date: 01/29/21 11 A
Hooke'S Law & Springs - Phet Simulation: Name: Date: 01/29/21 11 A
https://phet.colorado.edu/sims/html/masses-and-springs/latest/masses-and-springs_en.html
Introduction
Hooke’s Law teaches us how springs can store
and use potential energy. It is expressed as a
ratio of the force needed to stretch a spring
and the distance it is stretched:
F
k = Where “k” is the spring’s constant, a
x
value that is the same for the spring no
matter how much force is acting on it; “F” is
the force used to displace the spring, and “x”
is the distance the spring is displaced, in
meters. The units for spring constant are
N/m.
Steps
1. This whole lab can be done from the “Intro” page, so click that. Spend some time playing with the springs and
seeing how they work. Clicking “Natural Length”, “Equilibrium Position” and using the ruler can help you find the
displacement of the spring.
2. When you are ready to begin the lab, turn on the “Natural Length”, “Equilibrium Position” and use the ruler.
Start with 50 grams (0.05 kg) and the Spring Constant slid all the way down to small. Use this and your Weight
formula to find the force pulling on the spring, and measure how many meters the spring is displaced. Click the
Stop Sign at the top to get it to stop oscillating. Remember, divide by 100 to convert cm to m! Add this to your
data table below, and use these values to calculate the spring constant. Repeat with 100 g (0.1 kg) and 250g
(0.25 kg), and find the average of all the spring constants that you calculated.
Spring Constant set to Small
Spring Constant
Mass (kg) Gravity (g) Weight/Force (N) Displacement (m)
(N/m)
4.035N/m
Average:
3. Repeat the lab with the spring constant set halfway between “Small” and “Large”.
Spring Constant
Mass (kg) Gravity (g) Weight/Force (N) Displacement (m)
(N/m)
Average: 1.87N/m
4. And repeat once more with the Spring Constant set all the way up to “Large”
Spring Constant Set at Large
Spring Constant
Mass (kg) Gravity (g) Weight/Force (N) Displacement (m)
(N/m)
4.55 N/m
Average:
5. Now we’ll find the mass of the three “Mystery Weights” That are provided. Since we now know the spring
constant (or at least an average) we can work backwards to find the mass. Rearranging Hooke’s Law, we have:
F=kx
And using the weight in place of force, we get:
W =kx
kx
mg=kx m=
g
So we’ll multiply the spring constant you found above by the displacement, then divide that by gravity to get the
mass of our “mystery masses”. Fill in the data table below, being careful to use meters and kilograms.
Mass Color Spring Constant Displacement (m) Force/Weight Gravity (g) Mass (kg)
(N/m) (N)
Pink 1.2979N/m 0.59m 0.766N 9.81m/s2 0.08kg
“The larger the Spring Constant, the (Stiffer/ Looser) the spring, and the (More/Less) force is required to get it to be
displaced.”