SS - 321
SS - 321
321 stainless steel stockholders and suppliers, delivering to the whole of the UK. This grade is a
titanium stabilised austenitic stainless. The addition of titanium to 321 stainless helps improve its welding
properties and the elevated temperature properties of the steel. This stainless steel offers excellent oxidation
resistance and corrosion resistance. It offers higher creep and stress rupture properties that 304 austenitic
stainless grade. 321 stainless possesses excellent resistance to intergranular corrosion when worked or
welded in temperatures with the carbide precipitation range of 427-818°C.
We welcome export enquiries for stainless steel. Contact our sales office and consult our shipping policy for further
details.
Related Specifications
17/4PH | FV520B | S31254 | 904L | 310 | 316 | 440B | 440C | 420 | 410 | 416 | 431 | S31803 | S32760
Form of Supply
West Yorkshire Steel are suppliers and stockholders of sheet, plate and bar. We can guillotine cut pieces to your
required sizes. 321 stainless steel round bar is available and diameters can be cut to your requirements. Precision
ground steel bar can be supplied, providing a high quality stainless bar to close tolerances.
Sheet
Plate
Diameter
Applications
321 stainless steel is used widely in industries such as automotive, chemical, construction and aerospace. Typical
applications are exhaust systems and manifolds, heat exchangers, bellows, oil refinery equipment, furnace parts
and firewalls.
Analysis
Corrosion Resistance
Stainless steel 321 grade has similar corrosion resistance to that of 304 austenitic grade. However it is better suited
for applications where an unstabilised chromium nickel steel, such as 304, would be susceptible to intergranular
corrosion. It offers excellent corrosion resistance in most natural waters (rural and industrial), provided the chloride,
salt and concentrations of hydrochloric and organic acids are low.
Welding
Stainless steel 321 is readily weldable with most welding procedures. Oxyacetylene welding is not recommended
due to possible carbon pick up in the weld area. Due to intergranular carbide precipitation 321 can be welded
without loss of corrosion resistance and post weld annealing is not normally required, except for service in more
extreme conditions. We recommend you contact your welding consumables supplier who should be able to provide
you full assistance and information on welding stainless steel.
Forging
Heat the 321 slowly and uniformly throughout the section to 1150-1250°C. Re heat as necessary and avoid
working below 900°C. Cool in air.
Scaling Temperature
The oxidation resistance of a stainless steel is traditionally termed as the scaling temperature. This is the
temperature at which the oxidation rate of a stainless steel becomes unacceptably high. The safe scaling
temperature for continuous service of 321 is 875°C. In an oxidising and reducing sulphurous atmosphere the
scaling temperature of 321 stainless is lowered.
Certification
Stainless steel 321 grade is available with BS EN 10204 3.1 mill certificate, please request when placing any
orders.