Ditec Qik

Automatic barriers

www.ditecentrematic.com
SAFE
RELI
Smartly designed,
yet practical and safe,
to ensure a long life

E AND
IABLE
Soft edges, rounded corners, high performance and suitability
for any type of installation environment

Ditec Qik is the ideal solution for a totally safe access control
of medium to high transit environments such as hotels, banks,
shopping malls, as well as blocks of flats, companies and
camp sites, which always require access control of car parking
areas, to ensure their use to authorised people only.

Ditec Qik barriers are available in grey and red.

Ditec Qik Automatic barriers | 3

 02

04
03
05

01

Truly innovative shapes

and uncompromising safety
01 02 03 04 05

  01  Two different types of cabinet to cater to various needs: The arm is fitted with a rubber end plug and a provision for
one, slim-line and stylish for entrances of up to 5.8 metres, accessories (pivot pins, red reflective strips, fixed and moving
and one larger size for entrances of up to 7.6 metres, meeting mountings, vandal proof electrically operated lock, skirting
the requirement for greater sturdiness and conveying stronger- and battery kit).
impact aesthetics. The electronic panel is positioned on the
top part of the barrier at a height that permits easier access   04  To ensure more visibility in the more demanding
to components and therefore allows conveniently carrying out applications, the direct current version is fitted with an arm
setting and maintenance jobs. lighting kit: the LED goes off when the arm is up; it flashes
The top structure has a provision for an aerial to be installed when the arm is moving and is continuously lit when the arm
to avoid any vandal attacks. is down, in order to enhance its outline.
The pickled, metallic colour painted sheet metal does not
degrade with time, despite adverse weather conditions, and   05  The balancing system uses a single compression spring.
gives Ditec Qik a clean look. Five (differently coloured) springs are available. These springs,
when correctly positioned and adjusted, allow the arm to be
  02  The key operated lever release system can be promptly correctly balanced according to its dimension.
accessed from the inspection side; fitted with a cover plate, The system can be installed either on the right or on the left
the system can safely handle all emergencies in case of power hand side by simply changing its position.
failure. Two limit switches fitted to the alternating current version
and one encoder to the direct current version allow further
  03 
The aluminium arm, round or elliptical, has been adjustments to the arm to be made in order to satisfy all
designed to avoid any shearing problems, thanks to a rubber possible requirements. Ditec Qik is also fitted with two
guard located in the top and bottom section and to the rounded adjustable mechanical stops.
design of the rotation pin.
The round arm can be up to 7.6 metres long.
The elliptical shape ensures better wind resistance, thus
avoiding any swinging in the 5.8 metre version.

4 | Ditec Qik Automatic barriers

Distinctive features
and main functions
CE marking Access system built with safety in mind
Direct current motor with high performance in terms of The Ditec Qik barriers, when matched to the LAN control
speed and number of operations; alternating current motor systems, solve all access problems and are very easy to use.
suitable for all applications requiring lower performance To allow employees and key customers to operate the barrier,
and shorter life a wide range of solutions are available: a remote control, a
Gear motor mounted at right angle with the barrier exit in traditional key or keypad operated selector switch, a “LAN
order to avoid the use of a lever system and to leave more transponder” system or a “coin” system, which allows the
space available for the control unit barrier to be operated only once. This is a great solution for
Simple to install, the system ensures a very easy access hotels, sport centres, shops and restaurants, visited by users
to the control unit who need temporary, quick and simple access.
The 24 V version with encoder and limit switch allows Furthermore, the “magnetic loop” system is inherently very
slowdowns and speed control. Possibility of using batteries practical and simple to use.
and operating intermittency The detector, when installed on the pavement, allows the exit
In the Ditec Qik 80, the MD2 display module can be used barrier to be automatically operated when a vehicle goes over
for the diagnostics and enhanced control of panel it, thus ensuring a regular flow of vehicles and avoiding
adjustments, updatable by means of DMCS software. unwelcome queues.

Clean look and attention to details for heavy duty applications Specific accessories
All rivets are made of stainless steel and have no welding to Provision for photocell installation on fixed mounting
ensure long life and maintain their features unaltered. The Red reflective strips
monobloc aluminium die-cast reduction unit ensures easy Fixed mounting
installation, longer life and easy cleaning. Moving mounting
Vandal proof electrically operated lock
Tested to over a million operating cycles Aluminium skirting
The low stress reduction unit ensures a very high number of Arm pivot pin kit at 90°
operations. The test carried out on the unit has achieved with Batteries / Light kit
ease a staggeringly high number of operations, over 1,500,000. Display module for diagnostics and enhanced control

Technical specifications

Description Qik 4E Qik 7EH Qik 80EH

Barriers up to 3.5 m long up to 5.8 m long up to 7.6 m long

Travel control system lever-type limit switch encoder encoder + limit switch

Arm length up to 3.7 m 6m 7.95 m

Arm elliptic elliptic round

Duty class 4 - heavy 5 - very heavy 4 - heavy

S2 = 15 min S2 = 60 min S2 = 50 min

Intermittent operation S3 = 30% S3 = 60% S3 = 50%

Power supply 230 V~ / 50 Hz 230 V~ / 50-60 Hz 230 V~ / 50-60 Hz

Input 1.2 A 1A 1.2 A

Torque 90 Nm 70 Nm 200 Nm

Opening time 4 s/90° 2÷6 s/90° 6÷12 s/90°

Closing time 4 s/90° 2÷6 s/90° 6÷12 s/90°

Release system
for manual opening Key-operated Key-operated Key-operated

-20°C / +55°C
-20°C / +55°C -20°C / +55°C (-35°C / +55°C with NIO enabled,
Operating temperature (-35°C / +55°C with NIO enabled) (-10°C / +50°C with battery) -10°C / +50°C with battery)

Protection rating IP 24D IP 24D IP 24D

Product dimensions (mm) 300x320x1050 300x320x1050 405x525x1180

Control panel E1A (built-in) EL31R (built-in) EL34 (built-in)

Ditec Qik Automatic barriers | 5

 Main system functions

Qik 4E Qik 7EH Qik 80EH

Description E1A EL31R EL34

for 1 for 1 for 1

230 V~ 24 V= 24 V=
motor motor motor
Control panel with built-in radio with built-in radio with built-in radio decoder

Mains power supply 230 V~ / 50 Hz 230 V~ / 50-60 Hz 230 V~ / 50-60 Hz

Batteries (optional) (optional)

reduced consumption reduced consumption

Energy saving when in use when in use

Number of motors 1 1 1

Motor power supply 230 V~ / 5 A 24 V= / 7 A 24 V= / 16 A

Accessories power supply 24 V= / 0.5 A 24 V= / 0.3 A 24 V= / 0.5 A

Electrically operated lock 24 V= / 0.1 A 24 V= / 1 A

Flashing light 230 V 24 V 24 V

Automation open warning light from limit switch analogue analogue

Courtesy light

Limit switch provision

Encoder
to control speed and deceleration

Force adjustment control transformer automatic automatic

ODS - Obstruction detection system

Speed adjustment

Braking / Slowdown control

Operation time adjustment

Open control (with dip-switch) (with dip-switch)

Partly open control (with radio only)

Close control

Automatic timed close control

Inching control (with dip-switch)

Hold-to-run control

Stop safety device

Reverse operation safety device

Safety Test Facility

Soft Start

NIO - Antifreeze system

Instant closure after transit

Protection rating IP 55 IP 55 IP 55

6 | Ditec Qik Automatic barriers

Example installations
and overall dimensions
Example installations
Qik 4E - Qik 7EH Qik 80EH

flashing light
flashing light

barrier arm
barrier arm

barrier cabinet
barrier cabinet barrier mounted base
barrier mounted base
column mounted photocell column mounted photocell
column mounted photocell column mounted photocell

remote control
remote control
magnetic loop detector
- key operated selector switch to control passage - key operated selector switch magnetic loop detector
- digital combination keypad - digital combination keypad to control passage
- transponder technology system - transponder technology system
- column for control accessories - column for control accessories

Overall dimensions
Qik 4E - Qik 7EH Qik 80EH

PL = min 4500 - max 7600 405 525

100
PL = min 1300 - max 5800 300 320
125

140

1180

40
1050

210 80 80
840

815

355
560

Ditec Qik Automatic barriers | 7

Ditec Qik
The wide range of Ditec accessories allows the access systems to be used
with various control and monitoring options

Gol 4 transmitter Gol 4M keyboard transmitter Lan 7 control device with Xel 5 key operated selector
Fixed code, four channel-four with digital combination proximity control switch
function transmitter, with cloning Four channel coded control. Wireless identification system, Fitted with a tamper proof or
option, or with rolling code Allows electrically operated featuring TRANSPONDER vandal resistant device.
system. entrances to be opened with radio technology. Can be wall or column mounted.
Certified and compliant with all signals by entering a code. Allows detection without the need
current directives. Wall mounted. for a touch-controlled device.

Lan 4 digital combination Aluminium skirting Fixed and moving mounting Magnetic loop detector
system L=2 m, painted red/white. Fixed mounting to be installed on Starts the barrier automatic
Digital combination, vandal proof the ground, moving mounting to opening operation when a car
keypad. attach to the arm. goes over the sensor fitted to the
Up to 8 number PIN. pavement and it detects the car
going past it and stops the bar
from closing until the car has
gone through.

When building the system, only use Ditec accessories and safety devices.
Ditec automations all feature CE marking and are designed and built in compliance with the safety requirements of the Machinery Directive
(2006/42/EC), of the Electromagnetic Compatibility Directive (2004/108/EC) and of the Low Voltage Directive (2006/95/EC) and of other Directives,
laws, specific standards for special products and situations.
The Company reserves the right to make changes which may improve the products.
For this reason, the technical details featured in this catalogue are not binding.
The pictures shown in this leaflet were taken with the consent of those concerned or in public locations.
Further information can be found in the Technical Manuals available at the website: www.ditecentrematic.com

ISO 9001
Cert. n. 0957

Cod. N202B - 12/2012

Automatic barriers Ditec Qik
gdp milano 134465