697 - BTech ME III Semester
697 - BTech ME III Semester
697 - BTech ME III Semester
Sl. Category/
Course Title L T P Credits
No Code
1 BSC-105 Mathematics - III 3 0 0 3
2 MC-210 Environmental Science 2 0 0 0
3 ME-211 Thermodynamics 3 0 0 3
4 ME-212 Mechanics of Solids 3 0 0 3
5 ME-213 Material Science and Metallurgy 3 0 0 3
6 ME-214 Manufacturing Science 3 0 0 3
7 ME-215L Material Testing and Metallurgy Lab 0 0 3 1.5
8 ME-216L Manufacturing Science Lab 0 0 3 1.5
9 ESC-106 Applied Electronics 3 0 0 3
1.5
10 ESC-106L Applied Electronics Lab 0 0 3
Total Contact Hours 29 22.5
1
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
L T P C Internal Marks: 30
3 0 0 3 External Marks: 70
2
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
Text Book:
B.S Grewal, Higher Engineering Mathematics, 43rd Edition, Khanna Publications.
References
1. Erwin Kreyszig, Advanced Engineering Mathematics, 8th Edition, John Wiley & Sons
2. S.C. Gupta, V.K. Kapoor, Fundamentals of Mathematical Statistics, Sultan Chand &Sons
3. S.S. Sastry, Introductory Methods of Numerical Analysis, PHI Learning Pvt. Ltd.
3
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT–I (8)
Introduction to Environmental Science: Environment and society, major environmental issues: Ozone layer
depletion, Acid rains, global climate change etc, sustainable development,
Environmental impact assessment, environmental management
Natural Resources Utilization and its Impacts: Energy, minerals, water and land resources, Resource
consumption, population dynamics, urbanization..
UNIT–II (8)
Ecology and Biodiversity: Energy flow in ecosystem, food chain, nutrient cycles, eutrofication value of
biodiversity, biodiversity at global, national and local levels, threats for biodiversity, conservation of
biodiversity.
UNIT–III (8)
Water Pollution: Sources, types of pollutants and their effects, water quality issues, contaminanttransport, self-
purification capacity of streams and water bodies, water quality standards, principles of water and wastewater
treatment.
UNIT–IV (8)
Air Pollution: Sources, classification and their effects, Air quality standards, dispersion of pollutants,
control of air pollution, automobile pollution and its control.
UNIT–V (8)
Solid Waste Management: Sources and characteristics of solid waste, effects, Collection and transfer
system, disposal methods.
Text Books:
4
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-I
UNIT-II
First Law analysis of Closed Systems: First law of thermodynamics. Heat and work transfers.
Energy conservation equation for a closed system. Calculation of Work Transfer, Heat Transfer,
and Internal Energy changes.
First Law analysis of Open Systems: Derivation of Unsteady Flow Energy Equation (UFEE) and
Steady Flow Energy Equation (SFEE). Calculation of Work Transfer, Heat Transfer, and Enthalpy
changes. Thermodynamic analysis of flow through Nozzles, Diffusers, Turbines, Compressors,
Throttling devices and Heat Exchangers.
Application of Unsteady Flow Energy Equation (UFEE) : Calculation of Heat transfer during
charging /evacuation of a Cylinder.
UNIT-III
Carnot Cycle- Thermodynamic analysis of Carnot Cycle. Applications of Carnot cycle -Heat
Engine, Heat Pump and Refrigerator.
5
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
Second Law of Thermodynamics: Statements of Second Law of thermodynamics. Equivalence of
Kelvin-Planck and Clausius Statements. Clausius Inequality, Carnot Theorems, Thermodynamic
Temperature Scale.
Concept of Entropy: Reversible and Irreversible processes. Calculation of Entropy change during
various thermodynamic processes. Principle of Increase of Entropy. Second law analysis of a
control Volume.
Concepts of Exergy and Anergy: Loss in available energy. Second law efficiency of Turbines and
Compressors.
UNIT-IV
Properties of Steam- Use of Steam Tables and Mollier diagram. Power Plant Cycles-Carnot and
Rankine Cycles and their representation on P-V, T-s and h-s diagrams. Evaluation of performance
parameters–Efficiency, Work ratio, Specific Steam Consumption and Heat Rate.
UNIT-V
Non reactive Ideal homogenous gas Mixtures: Determination of properties of Mixture in terms
of properties of individual components of the mixture. Gibbs Phase Rule.
TEXT BOOKS
REFERENCE BOOKS:
6
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-I:
SIMPLE STRESSES AND STRAINS: Elasticity and plasticity – Types of stresses and strains – Hooke’s law
–stress – strain diagram for mild steel – Working stress – Factor of safety – Lateral strain, Poisson’s ratio
and volumetric strain – Elastic moduli and the relationship between them – Bars of varying section –
composite bars –Temperature stresses. Strain energy – Resilience – Gradual, sudden, impact and shock
loadings. Principal stresses, principal planes, the Mohr Diagram, Plane-Stress and Plane-Strain conditions.
UNIT-II:
SHEAR FORCE AND BENDING MOMENT: Definition of beam – Types of beams – Concept of shear
force and bending moment – S.F and B.M diagrams for cantilever, simply supported and overhanging beams
subjected to point loads , U.D.L, uniformly varying loads and combination of these loads – Point of contra
flexure – Relation between S.F., B.M and rate of loading at a section of a beam.
UNIT-III:
FLEXURAL STRESSES:
Theory of simple bending – Assumptions Derivation of bending equation: M/I=σ/y=E/R Neutral axis –
Determination bending stresses – section modules of rectangular and circular sections (Solid and Hollow),I,
T, Angle and Channel sections – Design of simple beam sections. Shear Stresses: Derivation of formula –
Shear stress distribution across various beams sections like rectangular, circular, triangular, I, T angle
sections.
UNIT-IV:
DEFLECTION OF BEAMS: Bending into a circular arc – slope, deflection and radius of curvature –
Differential equation for the elastic line of a beam – Double integration and Macaulay’s methods –
Determination of slope and deflection for cantilever and simply supported beams subjected to point loads, -
U.D.L. uniformly varying load. Mohr’s theorems – Moment area method – application to simple cases
including overhanging beams.
7
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
TORSION OF CIRCULAR SHAFTS: Theory of pure torsion in solid and hollow circular shafts, torsional
shear stresses and angle of twist, transmission of power, compound shafts, torsion of tapered shafts.
UNIT-V:
THIN CYLINDERS: Thin seamless cylindrical shells – Derivation of formula for longitudinal and
circumferential stresses – hoop, longitudinal and volumetric strains – changes in diameter, and volume of
thin cylinders – Riveted boiler shells – Thin spherical shells.
THICK CYLINDERS : Lame’s equation – cylinders subjected to inside and outside pressures – compound
cylinders.
TEXT BOOKS:
REFERENCE BOOKS:
8
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT–I
Crystal Structure: Unit cells, Metallic crystal structures. Imperfection in solids: Point, line,
interfacial and volume defects;
Fracture: Types of fracture in metals, modes of fracture, Ductile and brittle failure mechanisms,
Griffith criterion for brittle materials.
UNIT-II
Plain Carbon Steels ,Alloying of steel, properties of stainless steel and tool steels, maraging steels;
cast irons: grey, white, malleable and spheroidal cast irons;
Non-ferrous metals: Copper and copper alloys, Aluminium and Al-Cu–Mg alloys, Nickel based
super alloys and Titanium alloys
UNIT-III
9
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-IV
Phase diagrams: Substitutional and interstitial solid solutions. Interpretation of binary phase
diagrams and microstructure development; eutectic, peritectic, peritectoid and monotectic reactions.
Iron Iron-carbide phase diagram and microstrctural aspects of ledeburite, austenite, ferrite and
cementite, cast iron.
UNIT-V
TEXT BOOKS:
REFERENCE BOOKS:
10
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-I
Introduction to Casting: Molding Sands, Properties of sands, Testing of Sand properties and their
improvements. Types of patterns and pattern materials, Pattern allowances. Core sands, core sand
properties and core making processes. Machine Moulding techniques. Riser and Riser size
estimation Chvorinov and Caine's rules. Types gates and components of gating system. Theory of
solidification. Introduction to Furnaces: Cupola, Arc and Induction.
UNIT-II
Special Casting Processes: Shell Mould Casting, Co2 Casting, Investment Casting, Gravity and
Pressure Die Casting, Centrifugal Casting and Continuous Casting. Cleaning of Castings, Casting
defects and their Causes. Processing of Plastics: Blow molding, Injection molding, Reaction
injection molding, Rotational molding and Extrusion. Manufacturing of Composites: Hand lay-up,
Filament winding, Compression molding, Resin infusion molding
UNIT-III
Sheet Metal Working: Geometry of Punch and Die for Blanking/Piercing operations, Cup
Drawing, Strip Layout, Force Calculations. Metal spinning. High Energy Rate Forming: Explosive
forming, Magnetic forming, Electro-hydraulic forming and Rubber pad forming.
UNIT - IV
Bulk Deformation Processes: Simple Estimation of Forces in Forging, Rolling, Rod Drawing and
Extrusion. Hydrostatic Extrusion. Powder Metallurgy: Powder production methods, steps in powder
metallurgy processes, cold and hot isostatic pressing, typical industrial applications.
11
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-V
Gas Welding: Oxy-Acetylene Welding-Basic set up, Welding and Cutting Torches, Types of
Flames. Arc Welding: Schematics of SMAW, GTAW, GMAW, PAW, SAW, LBW and EBW,
Electrode Coatings and Electrode Specifications. Resistance Welding: Spot, Seam, Projection and
butt welding, Flash welding. Solid State Welding: Pressure Welding, Ultrasonic Welding, Friction
welding and Explosive welding. Basics of soldering and brazing.
TEXT BOOKS:
1. P.N.Rao, “Manufacturing Technology,” Vol. 1, Tata McGraw Hill Publ., 3nd Ed., 2011.
2. Amitabh Ghosh & Mallick, “Manufacturing Science”, Assoc. East west Press Pvt. Ltd. 4th Ed.,
2011.
REFERENCE BOOKS:
12
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
13
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
LIST OF EXPERIMENTS:
Foundry:
1. Study of foundry setup, equipment and the displayed charts with particular attention to moulding
machines, sand muller, shell moulding machine & centrifugal casting machine.
2. Mixing and preparation of molding sand samples, Testing of greensand properties.
3. Preparation of molding sand aggregate and simple moulds of greensand complete with sprues,
4. gates and risers.
5. Exercise of melting and casting involving prepared moulds, aluminium metal and crucible
furnace. Cleaning of castings, study of the features of the final casting, its features and any
visible defects.
6. Experimental Study of blow moulding.
7. Experimental study of centrifugal casting
Welding:
1. Study of the welding equipment and tools related to Arc, gas and resistance welding & displayed
charts.
2. Practice of Arc, Resistance Spot, Resistance Butt and Gas welding. Identification of different
types of gas flames.
14
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
3. Experimental study of
(a) Electrode characteristics of SMAW.
(b) Arc length and welding speed on bead characteristics.
(c) Welding current on bead penetration.
4. Determination of weld characteristics using DC and AC power sources.
5. TIG and MIG welding process - study and exercises.
Forming:
1. Study of the forming equipment: Different types of mechanical presses and hammers, Metal
spinning Lathe.
2. Conventional extrusion of metals.
3. Study of sheet metalworking dies and sheet metal working with existing dies.
4. Testing of metals: Fatigue tests. Testing of sheet metals for formability by using Erichson
cupping test.
5. Study of HERF processes. Sheet metal forming with water hammer forming equipment
15
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-I
Characteristics of PN Junction: Half wave rectifier, Full wave rectifier, filters, ripple, regulation,
TIF and efficiency, Zener diode and Zener diode regulators. CRT construction and CRO
applications
UNIT-II
Bipolar and Field Effect Transistors : Biasing FET , small signal model, h-parameter equivalent
circuits, basic amplifier circuits-CB,CE,CC configurations of BJT and CG,CS and CD
configurations of FETs, RC-coupled amplifier and its frequency response.
UNIT-III
Feedback Concepts: Types of negative feedback-modification of gain, bandwidth, input and
output impedances-applications; Oscillators: RC phase shift, Wien bridge, LC and Crystal
Oscillators.
UNIT-IV
Operational Amplifier: Characteristics, applications, Differential amplifiers, logic gate circuits-
Introduction to Digital Systems-AND,NAND,NOR,XOR gates, Binary half wave adder, full adder,
Multi-vibrators-Bi-stable, Mono-stable and Astable Multi-vibrators (Qualitative treatment
only),Schmitt trigger.
16
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
UNIT-V
Data Acquisition Systems: Construction and Operation of transducers-Strain gauge LVDT,
Thermocouple, Instrumentation Systems, Magnetic tape recorders, FM recording, Digital recording,
Digital to Analog and Analog to Digital conversions.
TEXT BOOKS:
1. Robert Boylestad L. and Louis Nashelsky, Electronic Devices and Circuit Theory, Prentice Hall
of India, 2007.
2. Helfrick D and David Cooper, Modern Electronic Instrumentation and Measurements
Techniques, 1st edition, Prentice Hall of India, 2006.
3. Salivahanan, Suresh Kumar and Vallavaraj, Electronic Devices and Circuits, 2nd edition, Tata
McGraw-Hill, 2010.
17
FACULTY OF ENGINEERING & TECHNOLOGY, KU 2019-2020
List of Experiments:
1. CRO-Applications, Measurements of R, L and C using LCR meter, Color code method and
soldering practice.
2. Characteristics of Semiconductors diode (Ge, Si and Zener)
3. Static Characteristics of BJT-Common Emitter
4. Static Characteristics of BJT-Common Base
5. Static Characteristics of FET
6. RC-Phase Shift Oscillator
7. Hartley and Colpitts Oscillators
8. Common Emitter Amplifier
9. Astable Multivibrator
10. Full-wave rectifier with and without filters using BJT
11. Operational Amplifier Applications
12. Strain Guage Measurement
13. Analog-to-Digital and Digital to Analog Converters
18