Datasheet 4051
Datasheet 4051
Datasheet 4051
, LTD
4051 CMOS IC
8-CHANNEL ANALOG
MULTIPLEXERS/DEMULTIPLEXERS
SOP-16
DESCRIPTION
UTC 4051 is single 8-channel analog multiplexers/demultiplexers
for application as digitally–controlled analog switches.
The device has three binary control inputs and an inhibit input. It DIP-16
feature low ON impedance and very low OFF leakage current.
Control of analog signals up to the complete supply voltage range
can be achieved.
FEATURES
TSSOP-16
* Wide Analog Voltage Range: VDD–VEE = 3V~18V.
(Note: VEE must be≦VSS) *Pb-free plating product number: 4051L
* Break-Before-Make Switching Eliminates Channel Overlap.
* Linearized Transfer Characteristics
* Implement an SP8T solid state switch effectively.
* Pin–to–Pin Replacement for CD4051
ORDERING INFORMATION
Order Number
Package Packing
Normal Lead Free Plating
4051-S16-R 4051L-S16-R SOP-16 Tape Reel
4051-S16-T 4051L-S16-T SOP-16 Tube
4051-P16-R 4051L-P16-R TSSOP-16 Tape Reel
4051-P16-T 4051L-P16-T TSSOP-16 Tube
4051-D16-T 4051L-D16-T DIP-16 Tube
www.unisonic.com.tw 1 of 6
Copyright © 2005 Unisonic Technologies Co., LTD QW-R502-054,A
4051 CMOS IC
PIN CONFIGURATION
X4 1 16 VDD
X6 2 15 X2
X 3 14 X1
X7 4 13 X0
UTC 4051
X5 5 12 X3
INH 6 11 A
VEE 7 10 B
VSS 8 9 C
PIN DESCRIPTION
PIN No. SYMBAL NAME AND FUNCTION
3 X Common Input/Output
6 INH Inhibit Inputs
7 VEE Supply Voltage
8 VSS Ground
11,10,9 A,B,C Binary Control Inputs
13,14,15,12,1,5,2,4 X0~X7 Independent Inputs/Outputs
16 VDD Positive Supply Voltage
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
CONTROL INPUTS – INHIBIT A, B, C (Voltages Referenced to VSS)
VDD=5V 2.25 1.5
Low Level Input Voltage VDD=10V VIL RON= per spec, IOFF = per spec 4.50 3.0 V
VDD=15V 6.75 4.0
VDD=5V 3.5 2.75
High Level Input Voltage VDD=10V VIH RON= per spec, IOFF = per spec 7 5.5 V
VDD=15V 11 8.25
Input Leakage Current ILEAK VIN= 0 or VDD, VDD=15V ±0.00001 ±0.1 µA
Input Capacitance CIN 5.0 7.5 pF
VEE
VDD
LEVEL
CONVERTED
CONTROL IN/OUT OUT/IN
CONTROL
VEE
TRUTH TABLE
16 VDD
TYPICAL CHARACTERISTICS
350 350
VDD = 7.5 V VDD = 5.0 V
300 VEE = - 7.5 V 300 VEE = -5.0 V
250 250
200 200
150 150
100 100
50 50
0 0
-10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10 -10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10
Input Voltage , VIN (V) Input Voltage , VIN (V )
350
VDD = 2.5 V
300 VEE = - 2.5 V
Ta =25℃
"ON" Resistance, RON (Ω)
250
200
150
100
50
0
-10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10
Input Voltage , VIN (V )
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.