US440i Cone Crusher Unit: in Action
US440i Cone Crusher Unit: in Action
US440i Cone Crusher Unit: in Action
in Action
Technical specification sheet
• Trouble free and optimal production ensured by on board high • Water spray units situated at discharge conveyor and over the
level Intelligence together with ASRi which comes as standard crusher.
• Market leading Sandvik CS440 cone crusher with a wide range • Unit is fitted with an engine and lubrication oil pre-heater
of mantels and settings for different applications are available. • Platforms are located around the crusher and power pack in
• Material level in the crusher is optimized at all time by a inbuilt order to provide access for inspection and maintenance.
monitoring system. This adjusts the feed conveyor speed and • Unit and process is operated via with radio control as an option.
feed from the primary unit. Cable remote control as standard.
• Feed conveyor is hydraulically manoeuvred from and to • Sensors are located at strategic locations to ensure a trouble free
working position. The input area of the feed conveyor has a operation and safe guard against costly breakdowns.
6m3 (212cubic feet) large rubber lined (with Sandvik modular • Emergency stop buttons are situated at key locations.
wear protection) feed hopper and is designed for feeding directly • The US440i is transported in one piece, with all components
from a front loader, or from a primary crusher. The conveyor remaining on board.
belt is protected by a steel structure in the hopper, which is • No oil spillage at filter changes due to vacuumized hydraulic
enhanced by impact bars that absorbs the shock from loading system and dust suppression systems.
and extends belt life.
• Wireless communication with Sandvik UJ440i primary unit in
combination with optional sonar at units discharge conveyor.
• Metal detector located before crusher.
• It is possible to position the material drop point from the feed
conveyor into the crusher via (radio) remote.
Technical specifications
Options
CM4 Dust filter CM30 Level indicator for stock pile at discharge end.
CM10 Belt scale on discharge conveyor basic unit Recommended to be used on UJ440i discharge
CM10A Belt scale on product conveyor. Fitting option 36 & conveyor in combination with option CM36 on
36A US440i
CM11 Radio remote control (Cable control standard) CM36 Hanging screen module, open circuit - see separate
CM12 King pin for dolly technical data sheet
CM20 Adaption mines and quarries for UK CM36A Hanging screen module, closed circuit - see separate
CM29 Manometer & o-ring set technical data sheet
SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
CM29A Complete filter set (incl. filters for engine, hydraulics CM36B Separate product conveyor course fraction (fitting
and for crusher lubrication) option 36A)
The units depicted show all options currently available, and the colour scheme reflects the eventual scheme to be used. Current models may differ from those featured in this brochure. Please contact Sandvik to
clarify specification and options. The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will
be suitable for a customer’s particular purpose and enquiry should always be made of the manufacturer to ensure such suitability. Whilst reasonable efforts have been made in the preparation of this document to
ensure its accuracy. The manufacturer assumes no liability resulting from errors or omissions in this document, or from the use or interpretation of the information contained herein. The manufacturer reserves the
right to make changes to the information in this brochure and the product design without reservation and without notification to users.
SP5-348
S A N D V I K M I N I N G A N D C O N S T R U C T I O N ( U K ) H E A RT H C OT E R OA D S WA D L I N C OT E D E R BY S H I R E D E11 9 D U E N G L A N D
T E L +4 4 ( 0 ) 1283 212121 FA X + 44 (0 ) 1283 217342 mobi l ecs.smc@sand vik . com w w w. min in ga n d con s t r u ct ion . s a n d v ik . com