MTP3055VL

June 2000
DISTRIBUTION GROUP*

MTP3055VL
N-Channel Logic Level Enhancement Mode Field Effect Transistor

General Description Features

• 12 A, 60 V. RDS(ON) = 0.18 Ω @ VGS = 5 V
This N-Channel Logic Level MOSFET has been designed
specifically for low voltage, high speed switching • Critical DC electrical parameters specified at elevated
applications i.e. power supplies and power motor temperature.
controls.
• Low drive requirements allowing operation directly from
This MOSFET features faster switching and lower gate logic drivers. Vgs(th) < 2 V.
charge than other MOSFETs with comparable RDS(ON)
specifications. • Rugged internal source-drain diode can eliminate the
need for an external Zener diode transient suppressor.
The result is a MOSFET that is easy and safer to drive
(even at very high frequencies). • 175°C maximum junction temperature rating.

G G
D TO-220
S

S
Absolute Maximum Ratings TC = 25°C unless otherwise noted

Symbol Parameter Ratings Units

VDSS Drain-Source Voltage 60 V
VGSS Gate-Source Voltage ±15 V
ID Drain Current - Continuous 12 A
- Pulsed 42
PD Power Dissipation @ TC = 25°C 48 W
Derate above 25°C 0.32 W/°C
TJ, TSTG Operating and Storage Junction Temperature Range -65 to +175 °C
Thermal Characteristics
Rθ JC Thermal Resistance, Junction-to- Case 3.13 °C/W
Rθ JA Thermal Resistance, Junction-to- Ambient (Note 1) 62.5 °C/W

Package Outlines and Ordering Information

Device Marking Device Package Information Quantity
MTP3055VL MTP3055VL Rails/Tubes 45 units
* Die and manufacturing source subject to change without prior notification.
1999 Fairchild Semiconductor Corporation MTP3055VL Rev. A1
 MTP3055VL
Electrical Characteristics T C = 25°C unless otherwise noted

Symbol Parameter Test Conditions Min Typ Max Units

DRAIN-SOURCE AVALANCHE RATINGS (Note 2)
w DSS Single Pulse Drain-Source V DD = 25 V, ID = 12 A 72 mJ
Avalanche Energy
IAR Maximum Drain-Source Avalanche Current 12 A

Off Characteristics
BV DSS Drain-Source Breakdown V GS = 0 V, ID = 250 µA 60 V
Voltage
∆ BV DSS Breakdown Voltage Temperature ID = 250 µA, Referenced to 25 ° C 55 mV/° C
∆TJ Coefficient
IDSS Zero Gate Voltage Drain Current V DS = 60 V, V GS = 0 V 10 µA
V DS = 60 V, V GS = 0 V, T J = 100
150 ° C
IGSSF Gate-Body Leakage Current, V GS = 15 V, V DS = 0 V 100 nA
Forward
IGSSR Gate-Body Leakage Current, V GS = -15 V, V DS = 0 V -100 nA
Reverse

On Characteristics (Note 2)
V GS(th) Gate Threshold Voltage V DS = V GS , ID = 250 µA 1 1.6 2 V
∆ V GS(th) Gate Threshold Voltage ID = 250 µA, Referenced to 25 ° C -4 mV/° C
∆TJ Temperature Coefficient
R DS(on) Static Drain-Source V GS = 5 V,ID = 6 A, 0.100 0.180 Ω
On-Resistance
V DS(on) Drain-Source On-Voltage V GS = 5 V,ID = 12 A 2.6 V
On-Resistance
g FS Forward Transconductance V DS = 8 V, ID = 6 A 5 8.7 S

Dynamic Characteristics
C iss Input Capacitance V DS = 25 V, V GS = 0 V, 345 570 pF
C oss Output Capacitance f = 1.0 MHz 110 160 pF
C rss Reverse Transfer Capacitance 30 40 pF

Switching Characteristics (Note 2)

td(on) Turn-On Delay Time V DD = 30 V, ID = 12 A, 20 ns
tr Turn-On Rise Time V GS = 5 V, R GEN = 9.1 Ω 190 ns
td(off) Turn-Off Delay Time 30 ns
tf Turn-Off Fall Time 90 ns
Qg Total Gate Charge V DS = 48 V, 7.8 10 nC
Q gs Gate-Source Charge ID = 12 A, V GS = 5 V 1.7 nC
Q gd Gate-Drain Charge 3.2 nC

Drain-Source Diode Characteristics and Maximum Ratings

IS Maximum Continuous Drain-Source Diode Forward Current (Note 2) 12 A
ISM Maximum Pulsed Drain-Source Diode Forward Current (Note 2) 42 A
V SD Drain-Source Diode Forward V GS = 0 V, IS = 12 A (Note 2) 1.3 V
Voltage
trr Drain-Source Reverse Recovery IF =12 A, di/dt = 100A/µs 55 nS
Time
Notes:
1. RθJA is the sum of the juntion-to-case and case-to-ambient thermal resistance.
2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%

MTP3055VL Rev. A1
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™ FAST ISOPLANAR™ Power247™ SuperFET™
ActiveArray™ FASTr™ LittleFET™ PowerSaver™ SuperSOT™-3
Bottomless™ FPS™ MICROCOUPLER™ PowerTrench SuperSOT™-6
CoolFET™ FRFET™ MicroFET™ QFET SuperSOT™-8
CROSSVOLT™ GlobalOptoisolator™ MicroPak™ QS™ SyncFET™
DOME™ GTO™ MICROWIRE™ QT Optoelectronics™ TinyLogic
EcoSPARK™ HiSeC™ MSX™ Quiet Series™ TINYOPTO™
E2CMOS™ I2C™ MSXPro™ RapidConfigure™ TruTranslation™
EnSigna™ i-Lo™ OCX™ RapidConnect™ UHC™
FACT™ ImpliedDisconnect™ OCXPro™ µSerDes™ UltraFET
FACT Quiet Series™ OPTOLOGIC SILENT SWITCHER VCX™
Across the board. Around the world.™ OPTOPLANAR™ SMART START™
The Power Franchise PACMAN™ SPM™
Programmable Active Droop™ POP™ Stealth™
DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and

supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

Rev. I11