THREE-PHASE MOTORS

FOR EU MARKET
HIGH EFFICIENCY IE2 | 0.12 TO 0.55 KW
PREMIUM EFFICIENCY IE3 | 0.75 TO 200 KW

BROCHURE 2021 IE2 IE3

INTERNATIONAL EFFICIENCY LEVELS: IE CODES
The International Standard IEC 60034-30-1;2014 ensures a The IEC 60034-30-1 states the efficiency levels (IE codes)
common base for electric motor designing and classification, and requirements and provides test conditions and efficiency
as well as for national legislative activities, increasing the level measurement methods specified in IEC 60034-2-1;2014.
of harmonization in MEPS (Minimum Energy Performance It doesn’t state the minimum efficiency level (MEPS). This
Standard) all over the world. depends on any national legislative activities and government
targets to save energy.

IE1 IE2 IE3 IE4 IE5

Standard High Premium Super-Premium Ultra-Premium
Efficiency Efficiency Efficiency Efficiency Efficiency

EUROPE: ECODESIGN REGULATION EU 2019/1781 AND AMENDMENT EU 2021/341

The Ecodesign Directive 2009/125/EC establishes, across 4/2014 on 6th January 2014. This regulation was superseded
the EU, a framework for setting eco-design requirements for on 25th October 2019 by Regulation (EU) 2019/1781, which
energy-related products. It is a key instrument of EU policy sets out new statutory requirements for motors and drives.
for improving the energy efficiency and other aspects of the
environmental performance of products placed on the market. The Regulation EU 2019/1781 and Amendment EU 2021/341
specify efficiency requirements for single speed three-phase
Requirements for the eco-design of electric motors and the motors from 0.12 to 1000kW, 2, 4, 6 and 8 poles, 50 Hz, 60 Hz
use of variable speed drives were set out in Regulation (EC) and 50/60 Hz, and introduce in all UE countries the following
640/2009 on 22nd July 2009 then amended by Regulation (EU) MEPS:

FIRST STEP: AS OF 1ST JULY 2021 SECOND STEP: AS OF 1ST JULY 2023
IE2 level: 0.12 to 0.55 kW IE2 level: 0.12 to 0.55 kW
IE3 level: 0.75 to 1.000 kW IE2 level: 0.12 to 1.000 kW
(All Ex motors, Single-phase motors)
IE3 level: 0.75 to 1.000 kW
IE4 level: 75 to 200 kW

8 8

6 6

4 4

2 2

0.12 0.75 75 200 375 1.000 0.12 0.75 75 200 375 1.000

• Three-phase single speed motors

• 0.12kW to1000kW
• 2,4,6 and 8 poles • Non continuous duty motors
• 50 Hz, 60 Hz, 50/60 Hz (duty<80%)
REGULATION • Continuous duty operation EXCLUSIONS • IC410 (TENV) design
SCOPE
(S1, S3>80%, S6>80%) • Motors above +60°C
• Brake motors and below -30°C
• IC411 (TEFC) and IC418 (TEAO) design
• Ex motors (excluded Ex eb)
SPECIAL APPLICATIONS
The quality of Lafert motors is generated by the constant adapt the motor to specific market segments allows us to
search for innovative solutions and from our natural propensity offer an exceptionally high level of customization, efficiency
for customization and co-engineering. Lafert specializes in and reliability.
designing and manufacturing customized electric motors,
created to meet the needs of each customer. More than 90% To ensure the maximum performance of our motors we
of Lafert products are non-standard motors. produce every component internally. This allows us to
tailor every element of our proposals by developing infinite
Thanks to our strong approach to the market, experience solutions for all applications.
in special applications and the wide range of solutions, we From flange design to special windings, from the degree of
can offer an electric and mechanical design perfect for every protection to the fan cooling, we customize everything to
application need. The co-designing approach from our create the perfect motor that maximizes the performance and
engineers and the skillful expertise of our technical office to energy savings of the final application.

TARGET APPLICATIONS

WIND ENERGY MAIN FEATURES

• High reliability, low maintenance

MOTORS FOR YAW DRIVE & PITCH DRIVE, COOLING &
• High corrosion protection level (according to ISO 12944)
VENTILATION, HYDRAULIC & POWER PACKS
• Special insulation system/voltage/frequency

HVAC MAIN FEATURES

• Special shafts design

CENTRIFUGAL AND AXIAL FANS & PUMPS • High corrosion protection level (according to ISO 12944)
FOR INDUSTRIAL AND COMMERCIAL ENVIRONMENT • Suitable for Variable Frequency Drive application
• Pad mounting design

COOLERS MAIN FEATURES

• High corrosion protection level (according to ISO 12944)

• Special insulation system/voltage/frequency
AIR COOLED RADIATORS
• Wide ambient temperature range
FOR HEAVY INDUSTRIAL APPLICATIONS
• Without ventilation (IC418 – TEAO design)
• Pad mounting design

AIR PROCESSING MAIN FEATURES

• Special flanges and shafts

COMPRESSORS, VACUUM PUMPS, BLOWERS • Dedicated electrical design to deliver required performances
• High reliability
 THREE-PHASE MOTOR RANGE FOR EU MARKET
HIGH EFFICIENCY IE2 – 0.12 TO 0.55 KW
PREMIUM EFFICIENCY IE3 – 0.75 TO 200 KW
EFFICIENCY LEVEL ACCORDING TO IEC 60034-30-1;2014
EFFICIENCY TESTING METHOD IEC 60034-2-1;2014
NOMINAL FULL LOAD EFFICIENCY ACCORDING TO IE3 CODE @ 400 V - 50 HZ

FOR MAINS VOLTAGE

400 V - 50 HZ
IE2 IE3
TEMPERATURE RISE TO CLASS B

MN η cos ϕ IN IA/IN MA/MN MS/MN MK/MN 

Type kW HP min-1 Nm 50% 75% 100% 400V 10-3 kgm2 kg

56 TO 160: ALLUMINIUM DESIGN

180 TO 315: CAST IRON DESIGN

3000 min-1 (2 poles)

AMHE 56Z BA 2 0.12 0.16 2650 0.4 49.1 55.8 53.6 0.73 0.4 3.5 3.4 3.4 3.5 0.10 3.5
AMHE 56Z CA 2 0.18 0.24 2660 0.6 55.0 59.8 60.4 0.64 0.7 3.9 3.8 3.8 3.9 0.09 3.4

AMHE 63Z AA 2 0.18 0.25 2720 0.6 53.8 59.7 60.4 0.76 0.6 3.7 3.0 3.0 3.1 0.14 3.6
IE2 AMHE 63Z BA 2 0.25 0.33 2790 0.9 60.8 67.2 64.8 0.68 0.8 4.5 3.2 3.2 3.3 0.17 4.1
AMHE 63Z CA 2* 0.37 0.5 2750 1.3 59.1 66.2 69.5 0.69 1.1 4.6 3.4 3.3 3.4 0.20 4.4

AMHE 71Z XA 2 0.37 0.5 2810 1.3 67.5 71.6 69.5 0.77 1.0 4.7 3.6 3.4 3.6 0.32 5.8
AMHE 71Z YA 2 0.55 0.75 2780 1.9 72.9 76.7 74.1 0.80 1.3 4.8 3.2 3.1 3.3 0.37 6.2
AMPE 71Z AA 2* 0.75 1 2880 2.5 76.5 80.8 80.7 0.70 1.9 5.5 3.1 3.0 3.2 0.69 8.2

AMPE 80Z AA 2 0.75 1 2910 2.5 77.8 81.2 82.0 0.78 1.7 8.9 4.7 4.5 4.8 0.7 9.5
AMPE 80Z BA 2 1.1 1.5 2870 3.7 78.7 81.7 82.7 0.76 2.4 9.3 5.0 4.9 5.3 0.9 11.1
AMPE 80Z CA 2* 1.5 2 2810 5.1 78.8 82.2 84.2 0.76 3.6 7.8 4.9 3.7 4.3 1.1 13.5

AMPE 90S AA 2 1.5 2 2875 5.0 83.2 84.8 84.2 0.85 3.0 8.4 3.6 3.2 3.8 1.56 14.0
AMPE 90L BA 2 2.2 3 2880 7.3 85.0 86.2 86.5 0.82 4.6 9.2 4.0 3.8 4.2 1.8 16.0
AMPE 90L DA 2* 3 4 2865 10.0 85.2 86.3 87.1 0.80 6.3 8.7 4.5 4.0 4.6 2.0 18.0

AMPE 100L AA 2 3 4 2900 9.9 82.3 85.8 87.1 0.89 5.6 8.8 5.5 3.5 4.5 4.05 22.8
AMPE 100L BA 2* 4 5.5 2920 13.1 85.4 87.2 88.1 0.81 8.2 10.9 6.1 5.2 5.7 7.3 26.5

AMPE 112M AA 2 4 5.5 2910 13.1 86.8 87.8 88.1 0.93 7.0 9.6 3.6 3.0 4.0 6.48 27.4
AMPE 112M BA 2* 5.5 7.5 2935 17.9 85.6 88.3 89.2 0.87 10.2 11.2 4.2 3.5 4.3 8.6 33.6
AMPE 112M CA 2* 7.5 10 2930 24.5 88.0 89.7 90.1 0.84 14.4 10.4 4.5 3.5 4.6 10.5 36.0

AMPE 132S ZA 2 5.5 7.5 2920 18.0 88.0 88.5 89.2 0.90 10.0 8.9 3.0 2.5 3.6 14.0 46.0
AMPE 132S TA 2 7.5 10 2910 24.6 88.6 89.2 90.1 0.92 13.1 8.9 3.0 2.6 3.6 16.0 53.0
AMPE 132M ZA 2 9.2 12.4 2930 30.0 88.6 89.8 90.7 0.89 16.5 10.1 3.7 3.3 4.0 17.5 58.0
AMPE 132M RA 2* 11 15 2935 35.8 90.0 90.8 91.2 0.89 19.9 9.7 4.4 3.5 4.6 25.0 59.0
AMPE 132M TA 2* 15 20 2915 49.2 91.0 92.2 91.9 0.88 26.8 9.6 3.7 2.6 3.8 28.0 68.0
IE3
AMPE 160M YA 2 11 15 2950 35.6 87.4 89.8 91.2 0.89 19.7 9.1 4.0 3.0 4.2 51.7 87.8
AMPE 160M ZA 2 15 20 2940 48.7 91.0 91.3 91.9 0.89 26.7 9.7 4.7 3.5 4.8 53.4 88.9
AMPE 160L ZA 2 18.5 25 2950 59.9 91.6 92.8 92.4 0.88 33.0 10.7 4.6 3.1 4.7 64.0 104.0
AMPE 160L TA 2* 22 30 2950 71.3 92.2 93.7 92.7 0.87 39.4 10.4 4.5 3.0 4.6 64.0 104.0

AMPE 180M ZG 2 22 30 2945 71.7 93.6 94.1 92.7 0.89 38.5 7.5 2.3 2.0 2.8 97 210

AMPE 200L PG 2 30 40 2945 97.9 93.2 93.8 93.3 0.88 52.7 6.7 2.4 2.0 2.7 173 234
AMPE 200L RG 2 37 50 2945 120.6 94.2 94.4 93.7 0.90 64.0 6.3 2.3 2.0 2.7 200 250

AMPE 225M PG 2 45 60 2950 146.7 94.1 94.6 94.0 0.88 75.9 6.9 2.3 2.0 2.8 344 322

AMPE 250M PG 2 55 75 2960 178.6 93.1 94.5 94.3 0.88 93.5 8.0 2.3 1.9 2.7 444 420

AMPE 280S G 2 75 100 2960 243.6 93.7 94.9 94.7 0.92 125.6 8.0 2.2 1.9 2.7 829 630
AMPE 280M G 2 90 125 2960 292.3 94.3 95.2 95.0 0.92 150.3 7.7 2.2 1.9 2.6 982 650

AMPE 315S G 2 110 150 2960 357.3 94.6 95.5 95.2 0.90 185.3 7.7 2.0 1.8 2.3 1509 930
AMPE 315M G 2 132 180 2960 428.7 94.7 95.5 95.4 0.91 221.9 7.6 2.0 1.8 2.3 1938 1030
AMPE 315L RG 2 160 200 2960 518.8 94.5 95.8 95.6 0.90 268.4 7.8 2.0 1.8 2.3 2197 1070
AMPE 315L G 2 200 270 2960 648.5 94.7 96.0 95.8 0.89 334.8 7.9 2.0 1.8 2.3 2554 1140

* Higher output (progressive motor)

 THREE-PHASE MOTOR RANGE FOR EU MARKET
HIGH EFFICIENCY IE2 – 0.12 TO 0.55 KW
PREMIUM EFFICIENCY IE3 – 0.75 TO 200 KW
EFFICIENCY LEVEL ACCORDING TO IEC 60034-30-1;2014
EFFICIENCY TESTING METHOD IEC 60034-2-1;2014
NOMINAL FULL LOAD EFFICIENCY ACCORDING TO IE3 CODE @ 400 V - 50 HZ

FOR MAINS VOLTAGE

400 V - 50 HZ
IE2 IE3
TEMPERATURE RISE TO CLASS B

MN η cos ϕ IN IA/IN MA/MN MS/MN MK/MN 

Type kW HP min-1 Nm 50% 75% 100% 400V 10-3 kgm2 kg

56 TO 160: ALLUMINIUM DESIGN

180 TO 315: CAST IRON DESIGN

1500 min-1 (4 poles)

AMHE 63Z AA 4 0.12 0.16 1330 0.8 61.3 62.6 59.1 0.67 0.4 2.4 2.0 1.9 2.0 0.25 3.3
AMHE 63Z BA 4 0.18 0.25 1345 1.3 61.9 66.7 64.7 0.66 0.6 2.3 1.9 1.8 1.9 0.27 4.1
AMHE 63Z CA 4* 0.25 0.33 1356 1.8 67.3 71.3 68.5 0.65 0.9 2.7 2.2 2.0 2.1 0.30 4.2

IE2 AMHE 71Z AA 4 0.25 0.33 1390 1.8 67.0 71.2 68.5 0.77 0.7 3.2 1.9 1.8 2.0 0.65 5.7
AMHE 71Z BA 4 0.37 0.50 1410 2.6 68.4 73.3 72.7 0.70 1.0 3.3 2.2 2.1 2.2 0.76 6.0
AMHE 71Z CA 4* 0.55 0.75 1410 3.8 71.5 75.5 77.1 0.71 1.5 3.6 2.4 2.3 2.4 1.00 7.3

AMHE 80Z XA 4 0.55 0.75 1422 3.8 75.1 77.8 77.1 0.72 1.5 3.6 2.6 2.5 2.6 1.38 8.2
AMPE 80Z AA 4 0.75 1 1435 5.0 80.7 81.5 82.5 0.74 1.8 5.5 2.7 2.6 2.8 2.5 11.0

AMPE 90S AA 4 1.1 1.5 1440 7.3 83.3 84.3 84.1 0.75 2.5 7.1 4.3 3.4 4.4 3.6 15.8
AMPE 90L BA 4 1.5 2 1430 10.0 84.1 85.2 85.3 0.72 3.6 6.6 4.3 3.8 4.4 3.7 16.4
AMPE 90L CA4 4 1.8 2.4 1430 12.0 83.5 86.1 86.0 0.69 4.5 8.5 4.3 3.7 4.4 3.9 20.0

AMPE 100L AA 4 2.2 3 1455 14.4 83.2 86.2 86.7 0.63 5.9 7.2 3.7 3.0 3.9 5.9 22.8
AMPE 100L BA 4 3 4 1440 19.9 85.1 87.1 87.7 0.73 6.8 8.1 4.1 3.8 4.1 7.3 26.5

AMPE 112M BA 4 4 5.5 1450 26.4 87.2 88.3 88.6 0.80 8.2 8.5 2.7 2.4 3.5 16.4 36.0

AMPE 132S AA 4 5.5 7.5 1460 35.9 90.6 91.3 89.6 0.84 10.6 8.6 2.5 2.1 3.5 33.0 60.0
AMPE 132M BA 4 7.5 10 1465 48.9 90.8 91.5 90.4 0.84 14.2 8.6 2.5 2.1 3.5 36.0 65.0
AMPE 132M CA 4 9.2 12.4 1460 60.1 91.0 91.6 91.0 0.84 17.3 8.7 2.4 2.0 3.6 45.0 63.0
AMPE 132M DA 4 11 15 1470 71.1 90.6 91.5 91.4 0.80 21.8 8.7 2.4 2.0 3.6 57.0 77.0

AMPE 160M AA 4 11 15 1475 71.3 91.6 92.4 91.4 0.83 21.0 8.2 2.1 1.7 2.8 89.0 100.0
AMPE 160L BA 4 15 20 1465 97.8 92.2 92.7 92.1 0.83 28.5 7.8 2.3 2.0 3.1 105.0 105.0
AMPE 160L CA 4* 18.5 25 1470 122 92.0 92.8 92.6 0.78 37.0 7.1 2.1 1.9 2.6 120.7 110.0
IE3 AMPE 160L DA 4* 22 30 1470 143.9 92.4 93.1 93.0 0.76 45.0 8.0 2.2 1.9 3.0 128.1 115.0

AMPE 180M ZG 4 18.5 25 1460 122.3 92.3 92.6 92.6 0.86 33.5 7.8 2.4 2.1 3.0 155 160
AMPE 180L ZG 4 22 30 1460 143.9 92.8 93.0 93.0 0.87 39.2 7.5 2.3 2.0 3.0 194 186

AMPE 200L RG 4 30 40 1470 196.2 92.5 93.6 93.6 0.81 57.1 7.9 2.4 2.0 2.7 287 245

AMPE 225S PG 4 37 50 1470 240.4 93.5 93.9 93.9 0.87 65.4 6.7 2.4 2.0 2.7 578 320
AMPE 225M PG 4 45 60 1470 290.3 93.7 94.2 94.2 0.87 79.2 7.0 2.3 2.0 2.8 653 350

AMPE 250M PG 4 55 75 1470 354.9 94.0 94.6 94.6 0.88 95.4 7.4 2.4 1.9 2.7 765 460

AMPE 280S G 4 75 100 1480 483.9 94.8 95.0 95.0 0.87 131.0 7.5 2.2 1.9 2.6 1887 620
AMPE 280M G 4 90 125 1480 580.7 94.3 95.2 95.2 0.85 160.5 7.7 2.2 1.9 2.6 2183 673

AMPE 315S G 4 110 150 1480 109.7 94.6 95.4 95.4 0.88 189.1 7.8 2.0 1.8 2.3 3718 1027
AMPE 315M G 4 132 180 1480 851.7 95.0 95.6 95.6 0.88 226.5 7.8 2.0 1.8 2.3 4297 1070
AMPE 315L RG 4 160 200 1480 1032.4 95.1 95.8 95.8 0.88 273.9 7.9 2.0 1.8 2.3 5120 1150
AMPE 315L G 4 200 270 1480 1290.4 95.3 96.0 96.0 0.89 337.9 7.7 2.0 1.8 2.3 6173 1230

* Higher output (Progressive motor)

 THREE-PHASE MOTOR RANGE FOR EU MARKET
HIGH EFFICIENCY IE2 – 0.12 TO 0.55 KW
PREMIUM EFFICIENCY IE3 – 0.75 TO 200 KW
EFFICIENCY LEVEL ACCORDING TO IEC 60034-30-1;2014
EFFICIENCY TESTING METHOD IEC 60034-2-1;2014
NOMINAL FULL LOAD EFFICIENCY ACCORDING TO IE3 CODE @ 400 V - 50 HZ

FOR MAINS VOLTAGE

400 V - 50 HZ
IE2 IE3
TEMPERATURE RISE TO CLASS B

MN η cos ϕ IN IA/IN MA/MN MS/MN MK/MN 

Type kW HP min-1 Nm 50% 75% 100% 400V 10-3 kgm2 kg

56 TO 160: ALLUMINIUM DESIGN

180 TO 315: CAST IRON DESIGN

1000 min-1 (6 poles)

AMEE 71Z AA 6 0.18 0.25 886 2.0 58.7 60.4 56.6 0.61 0.7 2.2 1.6 1.5 1.6 1.00 6.1
AMEE 71Z BA 6 0.25 0.33 860 2.7 62.0 62.7 61.6 0.65 0.9 2.5 1.7 1.6 1.7 1.19 6.6
IE2
AMEE 80Z AA 6 0.37 0.5 937 3.8 70.2 71.8 67.6 0.75 1.0 2.7 1.6 1.6 2.1 1.83 8.0
AMEE 80Z BA 6 0.55 0.75 922 5.7 66.9 71.2 73.1 0.74 1.5 2.9 2.2 2.1 2.1 2.36 9.4

AMPE 90S AA 6 0.75 1 940 7.6 78.1 79.2 78.9 0.62 2.2 4.6 1.7 1.6 1.8 6.0 18.1
AMPE 90L BA 6 1.1 1.5 935 11.2 79.1 81.2 81.0 0.64 3.1 4.2 1.8 1.7 2.3 6.5 19.0

AMPE 100L AA 6 1.1 1.5 960 10.9 78.9 81.3 81.0 0.65 3.0 6.2 2.2 1.8 2.8 11.6 25.0
AMPE 100L BA 6 1.5 2 920 15.6 81.1 82.7 82.5 0.68 3.8 5.7 1.7 1.3 2.3 14.2 26.0

AMPE 112M BA 6 2.2 3 920 22.8 83.3 85.1 84.3 0.68 5.4 5.3 2.0 1.8 2.4 20.1 34.2

AMPE 132S YA 6 3 4 975 29.4 84.1 85.8 85.6 0.65 8.0 5.5 2.1 1.9 3.1 37.7 42.0
AMPE 132M YA 6 4 5.5 975 39.2 85.2 87.1 86.8 0.66 10.3 5.4 2.2 1.7 3.2 44.4 46.0
AMPE 132M TA 6* 5.5 7.5 975 53.9 87.1 88.1 88.0 0.64 14.2 5.4 2.1 1.8 2.9 54.1 48.0

AMPE 160M YA 6 5.5 7.5 975 53.9 87.5 88.5 88.0 0.77 11.8 8.6 2.2 1.8 2.8 103.0 84.0
AMPE 160LM ZA 6 7.5 10 980 73.1 88.3 89.3 89.1 0.78 15.7 8.7 2.4 1.9 3.1 132.0 97.0
AMPE 160L ZA 6 9.2 12.4 970 87.6 88.9 90.1 89.8 0.74 19.9 8.3 3.1 2.2 3.5 136.0 105.0
AMPE 160L TA 6 11 15 970 108.3 89.1 90.4 90.3 0.78 22.9 8.0 2.7 2.4 3.2 136.0 105.0
IE3
AMPE 180L ZG 6 15 20 960 149.2 90.3 92.0 91.2 0.83 28.6 7.8 2.3 2.1 2.9 257 152

AMPE 200L PG 6 18.5 25 970 183.1 91.2 92.0 91.7 0.85 34.3 7.8 2.4 2.1 3.2 383 188
AMPE 200L RG 6 22 30 970 217.7 91.5 92.4 92.2 0.86 40.0 7.9 2.3 1.9 3.1 449 250

AMPE 225M PG 6 30 40 975 293.8 93.5 93.6 92.9 0.85 54.8 7.9 2.2 1.9 2.7 670 252

AMPE 250M PG 6 37 50 975 362.4 91.8 94.0 93.3 0.83 69.0 7.5 2.3 2.1 2.7 992 345

AMPE 280S G 6 45 60 980 438.5 92.2 93.5 93.7 0.86 80.6 7.2 2.3 2.0 2.8 2046 410
AMPE 280M G 6 55 75 980 535.9 92.8 93.9 94.1 0.86 98.1 7.7 2.2 1.9 2.7 2573 520

AMPE 315S G 6 75 100 980 730.8 93.2 94.8 94.6 0.89 128.6 7.9 2.1 1.9 2.5 4157 530
AMPE 315M G 6 90 125 980 877.0 93.4 95.0 94.9 0.90 152.1 8.0 2.0 1.8 2.3 3530 860
AMPE 315L RG 6 110 150 980 1071.9 94.0 95.4 95.1 0.90 185.5 7.7 2.0 1.8 2.3 4173 970
AMPE 315L G 6 132 180 980 1286.2 94.2 95.7 95.4 0.89 224.4 8.0 2.0 1.8 2.3 5167 1010

* Higher output (Progressive motor)

 THREE-PHASE MOTORS | FRAME SIZE 56 – 315 IM B3

56 TO 160 ALUMINIUM DESIGN | 180 TO 315 CAST IRON DESIGN

AD

AD
GA E
DB

HD
F

AC
GD

H
K

C B CA
LB

IEC Poles kW H A B C CA AD 1) HD 1) AC HC L LB D E F GD GA DB2)

56 2 all 56 90 71 36 6 64 92 148 110 188 168 9 20 3 3 10.2 M3

63 2-4 all 63 100 80 40 7 72 96 159 124 211 188 11 23 4 4 12.5 M4
71 2–4–6 all 71 112 90 45 8 83 110 181 139 246 216 14 30 5 5 16 M5
80 2–4–6 all 80 125 100 50 10 89 129 209 160 272 232 19 40 6 6 21.5 M6
90S 2-4-6 all 90 140 100 56 10 116 138 228 180 317 267 24 50 8 7 27 M8
2 2.2 90 140 125 56 10 91 138 228 180 317 267 24 50 8 7 27 M8
2 3 90 140 125 56 10 114 138 228 180 340 290 24 50 8 7 27 M8
90L
4 1.8 90 140 125 56 10 114 138 228 180 340 290 24 50 8 7 27 M8
4-6 all 90 140 125 56 20 91 138 228 180 317 267 24 50 8 7 27 M8
100 2–4-6 100 160 140 63 11 110 145 245 196 366 306 28 60 8 7 31 M10
2–4-6 all 112 190 140 70 12.5 126 160 272 225 388 328 28 60 8 7 31 M10
112
2 7.5 112 190 140 70 12.5 148 160 272 222 410 350 28 60 8 7 31 M10
2–4-6 all 132 216 140 89 12 134 194 326 248 445 365 38 80 10 8 41 M12
132S
2 7.5 132 216 140 89 12 154 194 326 248 465 385 38 80 10 8 41 M12
2 9.2 – 11 132 216 178 89 12 156 194 326 248 505 425 38 80 10 8 41 M12
2 15 132 216 178 89 12 156 194 326 248 556 476 38 80 10 8 41 M12
4 7.5 132 216 178 89 12 136 194 326 248 485 405 38 80 10 8 41 M12
132M 4 9.2 132 216 178 89 12 207 194 326 248 505 425 38 80 10 8 41 M12
4 11 132 216 178 89 12 156 194 326 248 505 425 38 80 10 8 41 M12
6 4 132 216 178 89 12 136 194 326 248 485 405 38 80 10 8 41 M12
6 5.5 132 216 178 89 12 207 194 326 248 556 476 38 80 10 8 41 M12
160M 2-4-6 all 160 254 210 108 14 180 238 398 317 608 498 42/28 110/60 12/8 8/7 45/31 M16/M10
160L 2-4-6 all 160 254 254 108 14 180 238 398 317 652 542 42/28 110/60 12/8 8/7 45/31 M16/M10
180M 2-4-6 all 180 279 241 121 15 na 259 439 360 687 797 48 110 14 9 51.5 M16
180L 2-4-6 all 180 279 279 121 15 na 259 439 360 725 835 48 110 14 9 51.5 M16
200 2-4-6 all 200 318 305 133 19 na 297 497 399 768 878 55 110 16 10 59 M20
225S 4-6 all 225 356 286 149 19 na 328 553 465 814 954 60 140 18 11 64 M20
2 all 225 356 311 149 19 na 358 553 465 809 919 55 110 16 10 59 M20
225M
4-6 all 225 356 311 149 19 na 328 553 465 839 979 60 140 18 11 64 M20
2 all 250 406 349 168 24 na 366 616 506 918 1058 60 140 18 11 64 M20
250
4-6 all 250 406 349 168 24 na 366 616 506 918 1058 65 140 18 11 69 M20
2 all 280 457 368 190 24 na 388 668 559 984 1124 65 140 18 11 69 M20
280S
4-6 all 280 457 368 190 24 na 388 668 559 984 1124 75 140 20 12 79.5 M20
2 all 280 457 419 190 24 na 388 668 559 1035 1175 65 140 18 11 69 M20
280M
4-6 all 280 457 419 190 24 na 388 668 559 1035 1175 75 140 20 12 79.5 M20
2 all 315 508 406 216 28 na 530 845 680 1205 1495 65 140 18 11 69 M20
315S
4-6 all 315 508 406 216 28 na 530 845 680 1235 1555 80 170 22 14 85 M20
2 all 315 508 457 216 28 na 530 845 680 1355 1495 65 140 18 11 69 M20
315M
4-6 all 315 508 457 216 28 na 530 845 680 1385 1555 80 170 22 14 85 M20
2 all 315 508 508 216 28 na 530 845 680 1355 1495 65 140 18 11 69 M20
315L
4-6 all 315 508 508 216 28 na 530 845 680 1385 1555 80 170 22 14 85 M20

1) Maximun distance
2) Centering holes in shaft extensions to DIN 332 part 2
 Lafert S.p.A.
J. F. Kennedy, 43
I-30027 San Donà di Piave (Venezia), Italy
Tel. +39 / 0421 229 611
Fax +39 / 0421 222 908
info.lafert@lafert.com

www.lafert.com

Branches & Partners

Lafert GmbH
Wolf-Hirth-Straße 10
D-71034 Böblingen
Germany
Phone +49 175 550 4526
lafert.germany@lafert.com

Lafert Electric Motors Ltd.

Unit 17 Orion Way
Crewe, Cheshire CW1 6NG
United Kingdom
Phone +44 / (0) 1270 270 022
lafertuk@lafert.com

Lafert Moteurs S.A.S.

L’Isle d’Abeau Parc de Chesnes
75, rue de Malacombe
F - 38070 St. Quentin-Fallavier
France
Phone +33 / 474 95 41 01
info.lafertmoteurs@lafert.com

Lafert Motores Electricos, S.L.U.

Polígono Pignatelli, Nave 27
E - 50410 Cuarte de Huerva (Zaragoza)
Spain
Phone +34 / 976 503 822
info@lafert.es

Lafert N.A. (North America)

5620 Kennedy Road - Mississauga
Ontario L4Z 2A9
Canada
Phone +1 / 800/661 6413 - 905/629 1939
sales@lafertna.com

Lafert Electric Motors (Australia)

Factory 3, 117-123 Abbott Road,
Hallam - VIC 3803
Australia
Phone +61 / (0)3 95 46 75 15
info@lafertaust.com.au

Lafert Singapore Pte Ltd

dnaitalia.com

48 Hillview Terrace #06-06

Hillview Building - Singapore 669269
Phone +65 / 67630400 - 67620400
info@lafert.com.sg

Lafert (Suzhou) Co., Ltd.

MKTG-10-219/21

No.3 Industrial Plant Building Yue Xi Phase 3,

Tian E Dang Lu 2011, 215104 Wuzong
Economic Development Zone, Suzhou
China
Phone +86 / 512 6687 0618
info.lafertsuzhou@lafert.com