Ersatzteilliste 
 
Hydraulikhammer 
EHB 50 
 
 
 
 
 
 
 
 
 
 
Hagen 
 
INSTRUCTIONS FOR USE

This parts manual describes the configuration of the part components of the product and is intended only to assist to
order spare parts for maintenance work

This manual contains no safety information for operating the product or maintenance work. Please observe the
safety instructions described in the relevant operation manual.

The illustrations shown in this manual is not appropriate for workshop instructions, so they should not be used for
assembling or disassembling the product. Please refer to the workshop manual for that purpose.

Use Everdigm genuine parts only.

Warranties do not cover damages that have been caused or aggravated by use of non-genuine parts.

For product warranty, please refer to the warranty conditions provided separately.

The illustrations in this manual show only the overall shapes and positions of the part components so they may not
be identical with the actual parts.

For the purpose of continued product improvement, some information in this manual could be changed without prior
notice, and might be differ from your product which was not covered by this publication.

If you found the information that is unclear or not corresponding with the actual product, contact Everdigm or
Everdigm distributor.

How to use this parts manual:

<Example>

EX-20 – CYLINDER UNIT

1 2
3 4 5 6 7 8

ITEM PART NO. PART NAME QTY S/N REMARKS

+ X123-9001 Cylinder Unit 2
1 X123-1001 Cylinder Housing 1
2 X123-9002 Rod Cover Ass’y 1
3 X123-1002 -Rod Cover -1 ~199 [R X123-1002A]
X123-1002A -Rod Cover -1 200~
4 A456-2001 -Slide Seal -2 [K1]
4-1 A456-2002 --Seal Ring --1 [K1] [D]
4-2 A456-2003 --O-Ring --1 [K1] [D]
5 A456-2004 -Dust Wiper -1 [K1]
6 X123-1003 Rod 1
7 X124-1005 Piston 1
  
  
  

1. Model name: Identification name of the product

2. Title: Title name of the assembly shown in the page

-2-
3. Item: Key number which shows the referring number of the part in corresponding illustration.
For a revised part which replaces the old one with same item number, the item is not shown.
Item numbers are not always in sequence.
+..... Represent the title assembly containing the entire part in the illustration.
* with the same item number..... Represent selectable parts depending on product version.

4. Part No.: Identification number of the part or assembly.

The part number might be omitted when the part cannot be supplied separately.

5. Part Name: Part name of the part.

The parts without a prefix in front of the part name are independent component parts or
subassemblies belong to the title assembly in corresponding list.
Prefix ‘-‘…. The parts marked with the prefix ‘-‘ in front of the part name are component parts
belong to the subassembly shown above of the rows of these parts.
Prefix ‘--‘… The parts marked with the prefix ‘--‘ are component parts of the ‘-‘ marked
subassembly containing these parts.

6. Qty: Quantity used for one unit of their parent assembly containing the parts.
When the quantity of the title assembly is blank, refer to the page shown with ‘►’, but when it is
not blank, it represents the quantity used for one unit of the product.
For the parts with the prefix ‘-‘ or ‘--‘ in front of their part name, the quantity is expressed with that
prefix.
AR… As many as required (variable quantity depending on the product)

7. S/N: Serial number of the product which those parts are applied
Parts without serial no. indications are used in every product regardless of serial number.

8. Remarks: Supplementary comment. Refer to the following for the code within [ ].
A….. The parts with this code can be used interchangeably with each other.
R….. The part with this code is no longer manufactured as a result of a revision and replaced by
the new part whose part number follows this code.
K….. The part with this code is contained in the service kit whose item number follows this code.
D….. The part with this code cannot be supplied separately. The assembly part containing this
part should be ordered.
S….. Non-standard part which can be supplied by separate order

How to order parts:

Please note the full model name and serial number of your product. This code can be found on the nameplate of your
product. Compare the parts to order with the corresponding parts in the drawings in this parts manual and note the part
numbers to order.

When ordering parts, please specify detail part names as shown in the following example,

Model name of product: EX-20

Serial number: 135

Part No.: A123-4567

Part name: Pin

Quantity: 2

Purchaser’s name & address: ....

-3-
 EHB50-Rev4/130114

TABLE OF CONTENTS

INSTRUCTIONS FOR USE ..................................................................................................................................... 2

EHB50 – Product Dimensions.................................................................................................................................. 5

EHB50 – Power Cell Ass’y ....................................................................................................................................... 7

EHB50 – Cylinder Ass’y ........................................................................................................................................... 9

EHB50 – Valve Ass’y.............................................................................................................................................. 10

EHB50 – Cylinder Bush Ass’y ................................................................................................................................ 11

EHB50 – Back Head Ass’y ..................................................................................................................................... 12

EHB50 – Front Head Ass’y .................................................................................................................................... 13

EHB50 – Accumulator Ass’y................................................................................................................................... 14

EHB50 – Swivel Joint............................................................................................................................................. 15

EHB50 – Seal Kit ................................................................................................................................................... 18

EHB50 – Tools (Chisels) ........................................................................................................................................ 19

EHB50 – Bracket Ass’y; BA ................................................................................................................................... 21

EHB50 – Mounting Adapter and Hoses ................................................................................................................. 22

EHB50 – Gas Charging Kit .................................................................................................................................... 23

EHB50 – Maintenance Tool Kit .............................................................................................................................. 25

Copyright © 2010 Everdigm Corp. All rights reserved.

This manual is copyrighted by Everdigm Corp. with all rights reserved in accordance with prevailing law. It is positively
prohibited to use or reproduce its contents in whole or in part without prior written permission.

-4-
 EHB50-Rev4/130114

EHB50 – Product Dimensions

Unit: mm (inch)

EHB50-BA

-5-
 EHB50-Rev4/130114

EHB50 – Power Cell Ass’y

902

801
901

802

400
803

200 300
804

800

600 601
603
604 100
605
602

701
700
702

805

500

-6-
 EHB50-Rev4/130114

EHB50 – Power Cell Ass’y

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B502-9901 Power-cell Ass’y 1

100 B502-9801 Cylinder Ass’y 1

200 B501-9802 Valve Ass’y 1

300 B500-9803 Cylinder Bush Ass’y 1

400 B502-9804 Back Head Ass’y 1

500 B502-9805 Front Head Ass’y 1

600 B700-9806 Pressure Adjuster Valve Ass’y 1

601 A082-0084 -Pressure Adjuster Valve -1
602 A082-0085 -Adjuster Nut -1
603 S8000341 -O-ring -1 [K5]
604 S8000211 -O-ring -1 [K5]
605 S8070210 -Back-up Ring -1 [K5]

700 B400-9807 Accumulator Ass’y 1

701 B400-9902 -Accumulator Ass’y -1
702 A011-0005 -Hex. Socket Bolt -8

800 B500-0603 Through Bolt Kit 4

801 B500-6001 -Back Head Nut -1
802 B500-6002 -Back Head Washer -1
803 B500-6003 -Back Head Bush -1
804 B500-6004 -Through Bolt -1
805 B500-6005 -Front Head Nut -1

901 A062-9004 Swivel Joint 2 [R AA062-0066]

AA062-0066 Swivel Joint 2 [R AA062-0031]
AA062-0031 Swivel Joint 2 [R AA062-0049]
AA062-0049 Swivel Joint 2
902 S2221461 Hex. Socket Bolt 8 M16x2.0xL40-10.9T

-7-
 EHB50-Rev4/130114

EHB50 – Cylinder Ass’y

115
120
111
111
117 117
124 109
115 110
101 116
120
102

113 111
119
108
117
114
119
113
119
121
122
117
111 117 107
111
123
118 117 106
112 111
117 120

111 115

103-1
103
103-2

104

105

-8-
 EHB50-Rev4/130114

EHB50 – Cylinder Ass’y

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B502-9801 Cylinder Ass’y 1

101 B502-1001 Cylinder 1

102 B502-1002 Piston 1
103 AA053-0023 Buffer Ring 1 [R AA053-0037]
AA053-0037 Buffer Ring 1 [K2]
103-1 -Seal Ring -1 [K2] [D]
103-2 -Back-up Ring -1 [K2] [D]
104 AA053-0024 U-Packing 2 [R AA053-0038]
AA053-0038 U-Packing 2 [K2]
105 AA054-0013 Dust Seal 1 [R AA054-0018]
AA054-0018 Dust Seal 1 [K2]
106 A082-9019 Speed Valve Ass’y 1
107 S2211861 Hex. Socket Bolt 4 M10x1.5XL20-10.9T
108 A061-0055 Shut-off Valve 1
109 A021-0003 Lock Pin 1
110 A061-0034 Plug 3 BSP 1/4
111 2181-1890D003 Plug 8 BSP 3/8
112 A061-0003 Plug 1 BSP 1/2
113 A061-0015 Plug 2 BSP 3/4
114 A061-0054 Plug 1 BSP 3/4
115 A061-0040 Plug 3 BSP 1 1/4
116 S8000111 O-ring 3 [K5]
117 S8000141 O-ring 8 [K5]
118 S8000181 O-ring 1 [K5]
119 S8000241 O-ring 3 [K5]
120 S8000381 O-ring 3 [K5]
121 S8010251 O-ring 2 [K5]
122 S8090251 Back-up Ring 1 [K5]
123 A016-0001D001 Heli-Coil 8
124 A053-0085D040 Static Seal 2 [K5]

-9-
 EHB50-Rev4/130114

EHB50 – Valve Ass’y

207

206

203

205

202

204

201

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B501-9802 Valve Ass’y 1

201 B500-2005 Valve Bush 1
202 B500-2004 Valve 1
203 B501-2001 Valve Plug 1
204 S8001001 O-ring 1 [K5]
205 S8000751 O-ring 1 [K5]
206 A052-0025 Protect Ring 1 [K5]
207 A053-0085D040 Static Seal 1 [K5]

- 10 -
 EHB50-Rev4/130114

EHB50 – Cylinder Bush Ass’y

304

303

304
301
303
304
302 302

302 302
305
305 304

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B500-9803 Cylinder Bush Ass’y 1

301 B500-1002 Cylinder Bush 1
302 A056-0045 Step Seal 2 [K3]
302-1 -Seal Ring -1 [K3] [D]
302-2 -O-ring -1 [K3] [D]
303 A057-0019 Gas Seal 1 [K3]
304 S8012201 O-ring 2 [K3]
305 A056-0043D003 Buffer Seal 1 [K3]

- 11 -
 EHB50-Rev4/130114

EHB50 – Back Head Ass’y

405
404
401

402
405
404
403

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B502-9804 Back Head Ass’y 1

401 B502-4001 Back Head 1
402 A062-0041 Minimess Coupling 1 BSP 1/4
403 S8012201 O-ring 1 [K5]
404 2181-1890D003 Plug 2 BSP 3/8
405 S8000141 O-ring 2 [K5]

- 12 -
 EHB50-Rev4/130114

EHB50 – Front Head Ass’y

510 509
508 512
512 511
505
508 513
512

514

507

502
503

504
507
501
506

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B502-9805 Front Head Ass’y 1

501 B502-5001 Front Head 1
502 B502-5002 Thrust Ring 1
503 B500-5008 Chisel Bush 1
504 AB502-0001 Front Bush 1
505 B500-5010 Chisel Pin 2
506 B500-5011 Stop Pin 5
507 A031-0006 PU-Sleeve 7
508 A061-0034 Plug 2 BSP 1/4
509 A061-0046 Plug 1 BSP 1/4
510 H002-0039D002 Plug 1 BSPT 1/4
511 A083-1066 O-ring 1 [K5]
512 S8000111 O-ring 3 [K5]
513 S8000181 O-ring 1 [K5]
514 A021-0003 Lock Pin 1

- 13 -
 EHB50-Rev4/130114

EHB50 – Accumulator Ass’y

701 709
711 708
712
704
707

706

710

703

705 702

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B400-9902 Accumulator Ass’y 1

701 B350-3001 Accumulator Body 1
702 B400-3002 Accumulator Cover 1
703 B350-3006 Diaphragm 1
704 A082-0060 Acc. Charging Valve 1
705 A011-0005 Hex. Socket Bolt 12
706 S8000151 O-ring 1 [K5]
707 S8000051 O-ring 1 [K5]
708 S8000951 O-ring 1 [K5]
709 A052-0016 Back-up Ring 1 [K5]
710 A061-0035 Plug 1
711 A061-0049 Cap 1
712 S8000201 O-ring 1 [K5]

- 14 -
 EHB50-Rev4/130114

EHB50 – Swivel Joint (1/3)

5
4

6 8

10
2

7
1

ITEM PART NO. PART NAME QTY S/N REMARKS

+ A062-9004 Swivel Joint 1 [R AA062-0066]

1 A062-0078 Swivel Body 1
2 A062-0080 Swivel Rotator 1
3 A015-0011 Washer 2 [R AA015-0003]
AA015-0003 Washer 1
4 S6500480 Snap Ring 1
5 A061-0034 Plug 1 BSP 1/4
6 S8000111 O-ring 1
7 A051-2252 O-ring 1
8 S8000501 O-ring 2
9 A056-0061 Rotary Seal 2
9-1 -Seal Ring -1 [D]
9-2 -O-ring -1 [D]
10 AA015-0004 Washer 1

- 15 -
 EHB50-Rev4/130114

EHB50 – Swivel Joint (2/3)

7
5

3
2

6
1

ITEM PART NO. PART NAME QTY S/N REMARKS

+ AA062-0066 Swivel Joint 1 [R AA062-0031]

1 AA062-0057 Swivel Body 1
2 AA062-0067 Swivel Rotator 1
3 AA015-0011 Washer 1
4 AA062-0034 Stopper 1
5 S8000241 O-ring 1
6 A051-2252 O-ring 1
7 S8000501 O-ring 2
8 A056-0061 Rotary Seal 2
-Seal Ring -1 [D]
-O-ring -1 [D]

- 16 -
 EHB50-Rev4/130114

EHB50 – Swivel Joint (3/3)

6 4

5 2

3
4

ITEM PART NO. PART NAME QTY S/N REMARKS

+ AA062-0031 Swivel Joint 1 1 1/4" - 1 1/4" [R AA062-0049]

+ AA062-0049 Swivel Joint 1 1 1/4" - 1 1/2"
1 AA062-0032 Swivel Body 1
2 AA062-0035 Swivel Rotator 1 [R AA062-0050]
AA062-0050 Swivel Rotator 1
3 AA060-0001D003 O-ring 2 [R AA055-0003]
AA055-0003 Quad Ring 2 [K4]
4 S8070511 Back-up Ring 2 [R AA052-0005]
AA052-0005 Back-up Ring 2 [K4]
5 AA015-0019 Washer 1
6 AA062-0034 Stopper 1
7 S8000241 O-ring 1 [K4]
8 A051-2252 O-ring 1 [K4]

- 17 -
 EHB50-Rev4/130114

EHB50 – Seal Kit

ITEM PART NO. PART NAME QTY S/N REMARKS

K1 AB502-0045 Seal Kit 1 [K2+K3+K4+K5]

K2 AB502-0008 Piston Lower Part Seal Kit 1
AA053-0037 -Buffer Ring -1
AA053-0038 -U-Packing -2
AA054-0018 -Dust Seal -1

K3 AB502-0004 Piston Upper Part Seal Kit 1

A056-0045 -Step Seal -2
A057-0019 -Gas Seal -1
S8012201 -O-ring -2 JIS G220-HsA90
A056-0043D003 -Buffer Seal -1

K4 AA062-0061 Swivel Joint Seal Kit 2

AA055-0003 -Quad Ring -2
AA052-0005 -Back-up Ring -2
S8000241 -O-ring -1
A051-2252 -O-ring -1

K5 AB502-0005 Normal Seal Kit 1

S8000051 -O-ring -1 JIS P5-HsA90
S8000111 -O-ring -6 JIS P11-HsA90
S8000141 -O-ring -10 JIS P14-HsA90
S8000151 -O-ring -1 JIS P15-HsA90
S8000181 -O-ring -2 JIS P18-HsA90
S8000201 -O-ring -1 JIS P20-HsA90
S8000211 -O-ring -1 JIS P21-HsA90
S8000241 -O-ring -3 JIS P24-HsA90
S8000341 -O-ring -1 JIS P34-HsA90
S8000381 -O-ring -3 JIS P38-HsA90
S8000751 -O-ring -1 JIS P75-HsA90
S8000951 -O-ring -1 JIS P95-HsA90
S8001001 -O-ring -1 JIS P100-HsA90
S8010251 -O-ring -2 JIS G25-HsA90
S8012201 -O-ring -1 JIS G220-HsA90
S8070210 -Back-up Ring -1 for JIS P21-HsA90, Bias-cut
S8090251 -Back-up Ring -1 for JIS G25-HsA90, Bias-cut
A052-0016 -Back-up Ring -1
A053-0085D040 -Static Seal -3
A083-1066 -O-ring -1 JIS S9-HsA90
A052-0025 -Protect Ring -1

- 18 -
 EHB50-Rev4/130114

EHB50 – Tools (Chisels)

TOOL SHAPE

TYPE OF TOOL Moil Wedge Flat Wedge Moil Point Flat Wedge Flat End
(Pyramid) -Horizontal (Conical) - Vertical (Blunt)
(Cross-cut) (Inline-cut)

PART NO. B500-6006 B500-6008 B500-6009 B500-6010 B500-6013

TOOL DIAMETER mm 180 180 180 180 180

(in.) (7.09) (7.09) (7.09) (7.09) (7.09)
TOOL LENGTH mm 1600 1600 1600 1600 1450
(in.) (63) (63) (63) (63) (57)
TOOL WEIGHT kg 265 280 263 280 255
(lbs) (584) (617) (580) (617) (562)

- 19 -
 EHB50-Rev4/130114

EHB50 – Bracket Ass’y; BA

26

25

22
21
20 14
19 18
POWER CELL
ASS'Y

17 23 17
24 16
22 A
16 15
9 5
10
7 13
17
16 3

4
8
11

12

- 20 -
 EHB50-Rev4/130114

EHB50 – Bracket Ass’y; BA

ITEM PART NO. PART NAME QTY S/N REMARKS

+ B502-9402 Bracket Ass’y 1

1 B502-7038 Bracket 1
2 B500-7103 Lower Damper 1
3 B500-7102 Wear Plate (2) 2
4 B500-7101 Wear Plate (1) 2
5 B220-7084 Support Damper 3
6 B500-7033 Upper Damper 1
7 B502-7058 Cover 1 1
8 B502-7059 Cover 2 1
9 A059-0010 Sealing Plug 1
10 B132-7080 Sealing Plug (2) 1
11 A059-0017 Plug 13
12 A059-0021 Plug 4
13 B220-7092 Sealing Plug 1
14 B132-7077 Wear Plate (2) 1
15 B250-7099 Cover Plate 1
16 S2221461 Hex. Socket Bolt 12 M16x2.0xL40-10.9T
17 S5110911 Spring Washer 12
18 B502-7029 P/C Supporter 1
19 S0182763 Hex. Bolt 4 M36x4.0xL80-10.9T
20 S5101713 Spring Washer 4
21 A062-9007 Swivel Joint 1
22 S8000141 O-ring 2 JIS P14-HsA90
23 H002-0047D003 Elbow; Union 1
24 H002-0012D029 Adapter 1
25 H001-0016D254 Hose 1
26 B500-7082 Shim AR

- 21 -
 EHB50-Rev4/130114

EHB50 – Mounting Adapter and Hoses

304 302
303
201
305
202
100
301

404
401 202
405 403
203
402
405

ITEM PART NO. PART NAME QTY S/N REMARKS

100 B500-7072 Mounting Adapter 1

200 B500-0610 Adapter Fasteners Set 1

201 S0184063 -Hex. Head Bolt -12 M36x4xL160-10.9T
202 S5101713 -Spring Washer -24 M36(Type 1)
203 S4013743 -Hex. Nut -12 M36x4-10T

300 B280-9950Do Mounting Pin Set 2

301 B280-9952Do -Bracket Pin -1
302 B280-9957Do -Spacer -2
303 B280-9955Do -Stop ring -1
304 S0167261 -Hex. Head Bolt -1 M16x2xL170-10.9T
305 S4002942 -Hex. Nut -2 M16x2-10T

400 B500-0609 Hose Set 2

401 A061-0026D004 -Hose Plug -1 SAE ORFS #20
402 H001-0001D087 -Hose -1 ORFS #20-L2800-P350
403 A062-0054 -Adapter -1 ORFS #20-BSP 1 1/4
404 S8000381 -O-ring -1 JIS P38-HsA90
405 A051-0252 -O-ring -2 AS568-025 HsA90

- 22 -
 EHB50-Rev4/130114

EHB50 – Gas Charging Kit

4
5
1 6
3

9 9
2 8 7
4 3
7
3

ACCUMULATOR GAS CHARGING BACKHEAD GAS CHARGING

ITEM PART NO. PART NAME QTY S/N REMARKS

+ A090-0054 Gas Charging Kit 1 Excl. item 9

1 A092-0005 Pressure Regulator 1 KS B4603
2 A062-0043 Adapter 1
3 A062-0041 Minimess Coupling 3 BSP 1/4
4 A082-0016 Exhaust Valve 2 BSPT 1/8
5 A012-0002 Cap Nut 1 KS B6214, W23-14
6 A062-0018 Coupling 1 KS B6214
7 A075-0028 Hose 1 S12.65x1.5-L1000(5800psi)
8 A062-0052 Adapter 1

9 A090-0007 Nitrogen Gas Bottle 1 [S]

- 23 -
 EHB50-Rev4/130114

EHB50 – Maintenance Tool Kit

3, 4, 5, 6
1, 2 7, 8, 9 10 11, 12, 13, 14

15, 16, 17 21, 22, 23, 24

18, 19, 20 25, 26, 27, 28 29, 30 31, 32

33, 34 35 36 37

38, 39, 40, 41, 42 43 44, 45

- 24 -
 EHB50-Rev4/130114

EHB50 – Maintenance Tool Kit

Standard Tool Kit Option Tool Kit
ITEM PART NO. PART NAME
BA BA
AB502-0006 Tool Kit 
AB502-0007 Tool Kit 
2 2199-9004 Tool Box 1 1
3 T6550006 L-Wrench 5 1
4 T6550007 L-Wrench 6 1 1
5 T6550009 L-Wrench 8 1 1
6 T6550011 L-Wrench 10 1
7 T6550013 L-Wrench 12 1
9 T6550018 L-Wrench 17 1
10 T7050003 Screw Driver( ─) 1 1
12 T6510075 Spanner 19x22 1
15 T6510022 Spanner 30 1
16 T6510025 Spanner 36 1 1
20 T6510031 Spanner 55 1 1
22 A090-0031 Ring Wrench 55 1 1
28 A090-0061 Ring Wrench 90 1 1
30 T6640009 T-Wrench 14 1
33 A090-0042 Stop-pin Tool 20 1 1
35 T7260057 Hammer 1 1
36 2199-1005 Pipe 1
38 S3140031 Eye Bolt M12 1
40 S3140051 Eye Bolt M20 2
42 S3140071 Eye Bolt M30 2
43 2199-9008 Grease Gun 1 1

- 25 -
Notes
Notes