BEARING SOLUTIONS FOR THE MATERIAL HANDLING INDUSTRY

Mounted Units Tailored for the Material Handling Industry

Material Handling applications present challenging for the industry application needs. Newly developed, highly
environmental conditions that demand flexible mounting visible, open and close ended caps are also available on
and locking styles and zero downtime. Standard bearings Material Handling units to provide protection against
are often designed for use in other industries with less injuries due to contact with rotating parts.
demanding applications and don’t provide the features
needed for this specific application. PEER Bearing Common Applications
Company offers a full line of mounted bearing units • Conveyor systems
tailored specifically for the Material Handling industry. • Packaging equipment
• Palletizers
PEER insert bearings are offered with seals from moderate • HVAC systems and air handling units
to extreme contamination applications. Available locking • Ventilation fans
options include set screw, eccentric locking collar and PEER’s • Baggage handling equipment
patented GRIP-IT™ PLUS which provide the solutions required

Mounted Units Features & Benefits R (MH) G (MHAP)

FEATURE BENEFIT R (MH) G (MHAP)

Contact seal Contamination prevention Moderate Extreme
High quality through hardened bearing steel Improves fatigue life x x
Precision ground and superfinished raceways Reduces vibration and extends life x x
Protective end cap available Protects from incidental contact with rotating shaft and bearing x x
Set screw and eccentric locking collar Multiple options to suit each application x x
GRIP-IT™ Plus locking Concentric 360° hold x
Premium nitrile seal material Longer seal life due to improved high temperature and wear resistance x
Heavy gauge steel shroud Protects seal from large solid contaminates (stones, pebbles, dirt) x
Increased grease fill Improves contaminant exclusion x
Premium polyurea thickened grease High and low temperature capability extends grease life x
Nylon retainer Improves misalignment capability x
Extended single seal lip design Extends life and improves contaminant protection x
Knurled landing grooves Optimizes seal retention x
R (MH) = RST Seal and slinger for material handling units
G (MHAP) = G Seal for high performance material handling units
 Conveyor Bearing Locations

4 Material Handling Unit Features (MHAP)

5 1. Grade 10 balls for smooth operation

1
2. Nylon 6/6 ball retainer designed to accommodate
6
misalignment

3. High quality bearing insert with multiple locking styles

2
4. Housings manufactured from high strength ASTM
Grade 30 cast iron

5. Optional relubrication feature

3
6. Seals manufactured from high quality nitrile rubber
bonded to heavy gauge steel shrouds

7. Optional protective end caps molded from a highly

visible and durable polymer

PEER protective end caps (see pg. 7) are available in sizes to accommodate
from 3/4" (20mm) to 2 7/16" (60mm) shaft sizes. Protective end caps can be
used with dual set screw, eccentric locking collar and PEER’s patented
GRIP-IT™ Plus insert bearings in combination with standard cast iron
7 housings including medium-duty and 300 series.
 PEER Bearing Part Number Nomenclature

UC FT 205 -16 MH
BEARING TYPE MH (Groove machined in casting for End Cap)
MHAP (Groove machined in casting for End Cap
with Premium Seals)

BEARING BORE SIZE

12 = ¾” 23 = 1 7/16” 50mm
UC HC GR
Dual Set Screw Eccentric 20mm 35mm 32 = 2”
GRIP-IT™
Lock Lock Collar Plus Lock 16 = 1” 24 = 1 ½” 35 = 2 3/16”
25mm 40mm 55mm
19 = 1 3/16” 28 = 1 ¾” 39 = 2 7/16”
CASTING STYLE 30mm 45mm 60mm
P (Pillow Block) 20 = 1¼” 31 = 115/16”
LP (Low profile Pillow Block)
FB (3-Bolt Flange Bracket) BEARING OUTER RING SIZE
T (Take-up unit) 204 = 47mm 209 = 85mm
FT (2-Bolt Flange for UC & GR Bearings) 205 = 52mm 210 = 90mm
FTS (2-Bolt Flange for HC Bearings) 206 = 62mm 211 = 95mm
F (4-Bolt Flange for UC & GR Bearings) 207 = 72mm 212 = 100mm
FS (4-Bolt Flange for HC Bearings) 208 = 80mm

2-Bolt Flange Unit Specifications

FT SERIES 2-BOLT FLANGE UNITS FTS SERIES 2-BOLT FLANGE UNITS

DUAL SET SCREW ECCENTRIC LOCK COLLAR
GRIP-IT™ PLUS COLLAR

DIMENSIONS MM/ (IN.) FT Series FTS Series

SIZE Bolt Size Bolt Size
a a1 e g g1 l l1 s s1 b b1 zz zz1 (in.) (in.)
113.00 113.00 89.70 11.10 11.10 24.00 29.00 11.00 12.00 60.30 60.30 56.20 60.70
204 3/8" 3/8"
(4.449") (4.449") (3.531") (.437") (.437") (.945") (1.142") (.433") (.472") (2.374") (2.374") (2.213") (2.390")
130.20 123.80 98.80 12.70 13.50 26.00 29.60 13.50 12.00 68.30 69.90 59.00 62.30
205 7/16" 3/8"
(5.126") (4.874") (3.890") (.500") (.531") (1.024") (1.165") (.531") (.472") (2.689") (2.752") (2.323") (2.453")
147.60 141.30 116.70 12.70 13.50 29.00 34.90 13.50 12.00 80.20 79.40 61.90 67.60
206 7/16" 3/8"
(5.811") (5.563") (4.594") (.500") (.531") (1.142") (1.374") (.531") (.472") (3.157") (3.126") (2.437") (2.661")
161.10 155.60 130.20 14.30 14.30 30.00 37.30 15.00 15.00 89.70 92.10 67.90 75.20
207 1/2" 1/2"
(6.343") (6.126") (5.126") (.563") (.563") (1.181") (1.469") (.591") (.591") (3.531") (3.626") (2.673") (2.961")
174.60 171.50 143.70 14.30 14.30 34.00 38.90 15.00 13.50 100.00 104.80 71.20 76.10
208 1/2" 7/16"
(6.874") (6.752") (5.657") (.563") (.563") (1.339") (1.531") (.591") (.531") (3.937") (4.126") (2.803") (2.996")
188.10 179.40 148.40 15.10 14.30 35.00 44.50 17.00 17.00 108.00 111.10 72.20 81.20
209 9/16" 9/16"
(7.406") (7.063") (5.843") (.594") (.563") (1.378") (1.752") (.669") (.669") (4.252") (4.374") (2.843") (3.197")
196.90 189.00 157.20 15.10 14.30 39.00 46.80 17.00 17.00 115.10 115.90 75.70 83.50
210 9/16" 9/16"
(7.752") (7.441") (6.189") (.594") (.563") (1.535") (1.843") (.669") (.669") (4.531") (4.563") (2.980") (3.287")
223.80 216.00 184.20 18.30 20.60 41.40 50.00 18.00 17.00 130.20 133.40 88.10 96.70
211 5/8” 9/16”
(8.811”) (8.504”) (7.252”) (.720”) (.811”) (1.630”) (1.969”) (.709”) (.669”) (5.126”) (5.252”) (3.469”) (3.807”)
250.00 235.00 201.60 18.30 20.60 45.00 53.20 22.00 17.00 139.70 138.10 92.20 99.90
212 3/4” 9/16”
(9.843”) (9.252”) (7.937”) (.720”) (.811”) (1.772”) (2.094”) (.866”) (.669”) (5.500”) (5.437”) (3.630”) (3.933”)
Protective end caps sold separately
3-Bolt Flange Bracket Unit Specifications

FB SERIES 3-BOLT FLANGE BRACKET UNITS

DUAL SET SCREW LOCK
ECCENTRIC LOCK COLLAR
GRIP-IT™ PLUS COLLAR

DIMENSIONS MM / (IN) BOLT

SIZE SIZE
w A b D I s g h j e zz (in.)
108.00 76.25 63.50 60.30 25.40 9.90 8.00 42.90 22.20 38.10 57.30
204 5/16
(4.252") (3.002") (2.500") (2.374") (1.000") (.390") (.315") (1.689") (.874") (1.500") (2.256")
120.70 85.75 69.90 63.50 27.20 9.90 9.50 46.00 28.60 41.30 59.90
205 5/16
(4.752") (3.376") (2.752") (2.500") (1.071") (.390") (.374") (1.811") (1.126") (1.626") (2.358")
136.50 95.20 82.60 69.90 28.60 9.90 9.50 52.40 31.80 47.60 61.70
206 5/16
(5.374") (3.748") (3.252") (2.752") (1.126") (.390") (.374") (2.063") (1.252") (1.874") (2.429")
155.65 108.00 95.30 82.60 32.00 13.10 12.70 60.30 31.80 50.80 70.20
207 7/16
(6.128") (4.252") (3.752") (3.252") (1.260") (.516") (.500") (2.374") (1.252") (2.000") (2.764")
164.30 115.50 100.00 77.80 35.70 11.90 15.90 60.30 41.30 50.00 72.20
208 3/8
(6.469") (4.547") (3.937") (3.063") (1.406") (.469") (.626") (2.374") (1.626") (1.969") (2.870")
175.50 121.10 106.40 80.20 36.80 11.90 18.30 65.10 42.90 54.00 74.00
209 3/8
(6.909") (4.768") (4.189") (3.157") (1.449") (.469") (.720") (2.563") (1.689") (2.126") (2.913")
190.50 131.75 117.50 101.60 38.00 13.10 12.70 74.60 41.30 69.90 74.70
210 7/16
(7.500") (5.187") (4.626") (4.000") (1.496") (.516") (.500") (2.937") (1.626") (2.752") (2.941")
Protective end caps sold separately

4-Bolt Flange Unit Specifications

F SERIES STANDARD 4-BOLT FLANGE UNITS FS SERIES 2-BOLT FLANGE UNITS

DUAL SET SCREW LOCK ECCENTRIC LOCK COLLAR
GRIP-IT™ PLUS COLLAR
DIMENSIONS MM / (IN) F SERIES FS SERIES
SIZE BOLT SIZE BOLT SIZE
a e g g1 I I1 s s1 zz zz1 (IN.) (IN.)
85.70 63.50 11.10 9.50 25.40 28.80 11.00 12.00 57.30 60.70
204 3/8 3/8
(3.374") (2.500") (.437") (.374") (1.000") (1.134") (.433") (.472") (2.256") (2.390")
95.30 69.90 12.70 11.10 26.90 31.20 12.00 12.00 59.75 64.10
205 3/8 3/8
(3.752") (2.752") (.500") (.437") (1.059") (1.228") (.472") (.472") (2.352") (2.524")
108.00 82.60 14.30 15.90 27.30 34.30 12.00 13.50 67.20
206 - 3/8 7/16
(4.252") (3.252") (.563") (.626") (1.075") (1.350") (.472") (.531") (2.630")
117.50 92.10 15.10 12.70 30.10 38.10 13.50 13.50 68.30 75.50
207 7/16 7/16
(4.626") (3.626") (.594") (.500") (1.185") (1.500") (.531") (.531") (2.677") (2.972")
130.20 101.60 15.10 16.70 35.70 38.90 15.00 15.00 72.90 76.10
208 1/2 1/2
(5.126") (4.000") (.594") (.657") (1.406") (1.531") (.591") (.591") (2.870") (2.996")
136.50 105.00 15.90 18.30 38.10 39.70 15.00 17.00 75.20 76.90
209 1/2 9/16
(5.374") (4.134") (.626") (.720") (1.500") (1.563") (.591") (.669") (2.961") (3.028")
142.90 111.10 15.90 15.90 39.70 46.00 15.00 17.00 76.40 82.70
210 1/2 9/16
(5.626") (4.374") (.626") (.626") (1.563") (1.811") (.591") (.669") (3.008") (3.256")
161.90 130.20 18.30 17.50 42.90 50.00 18.00 18.00 89.25 96.70
211 5/8” 5/8”
(6.374”) (5.126”) (.720”) (.689”) (1.689”) (1.969”) (.709”) (.709”) (3.514”) (3.807”)
174.60 142.90 18.30 17.50 47.60 54.80 18.00 18.00 94.45 101.50
212 5/8” 5/8”
(6.874”) (5.626”) (.720”) (.689”) (1.874”) (2.157”) (.709”) (.709”) (3.719”) (3.996”)
Protective end caps sold separately
 Pillow-Block Unit Specifications

P SERIES PILLOW-BLOCK UNITS LP SERIES PILLOW-BLOCK UNITS

DUAL SET SCREW DUAL SET SCREW
GRIP-IT™ PLUS COLLAR GRIP-IT™ PLUS COLLAR
ECCENTRIC LOCK COLLAR ECCENTRIC LOCK COLLAR
DIMENSIONS MM / (IN) BOLT
SIZE
h h1 a e b s1 s2 g g1 w w1 SIZE (in.)
33.34 31.75 127.00 95.25 34.00 12.70 19.05 13.49 11.91 64.29 62.71
204 3/8
(1.313") (1.250") (5.000") (3.750") (1.339") (.500") (.750") (.531") (.469") (2.531") (2.469")
36.51 33.34 139.70 104.78 38.10 12.70 19.05 15.88 12.70 70.64 67.47
205 3/8
(1.437") (1.313") (5.500") (4.125") (1.500") (.500") (.750") (.625") (.500") (2.781") (2.656")
42.86 39.69 165.10 120.65 44.60 16.67 20.64 16.67 13.49 83.34 80.17
206 1/2
(1.687") (1.563") (6.500") (4.750") (1.756") (.656") (.812") (.656") (.531") (3.281") (3.156")
47.63 46.04 166.69 127.00 45.80 16.67 20.64 18.26 16.67 93.66 92.08
207 1/2
(1.875") (1.813") (6.563") (5.000") (1.803") (.656") (.812") (.719") (.656") (3.687") (3.625")
49.21 49.21 184.15 137.32 48.80 16.67 20.64 20.64 20.64 101.60 101.60
208 1/2
(1.937") (1.937") (7.250") (5.406") (1.921") (.656") (.812") (.812") (.812") (4.000") (4.000")
53.98 52.39 189.71 146.05 51.20 16.67 20.64 19.05 17.46 107.95 106.36
209 1/2
(2.125") (2.063") (7.469") (5.750") (2.016") (.656") (.812") (.750") (.687") (4.250") (4.187")
57.15 55.56 206.38 158.75 55.60 19.84 22.23 19.05 17.46 115.89 114.30
210 5/8
(2.250") (2.187") (8.125") (6.250") (2.189") (.781") (.875") (.750") (.687") (4.563") (4.500")
63.50 61.91 219.08 170.66 58.90 19.84 22.23 22.23 20.64 126.21 124.62
211 5/8”
(2.500”) (2.437”) (8.625”) (6.719”) (2.319”) (.781”) (.875”) (.875”) (.813”) (4.969”) (4.906”)
69.85 68.26 239.71 184.15 61.60 19.84 25.40 22.23 20.64 141.29 139.70
212 5/8”
(2.750”) (2.687”) (9.437”) (7.250”) (2.425”) (.781”) (1.000”) (.875”) (.813”) (5.563”) (5.500”)
Protective end caps not available

Take-Up Unit Specifications

T SERIES TAKE-UP UNITS

DUAL SET SCREW
GRIP-IT™ PLUS COLLAR
ECCENTRIC LOCK COLLAR

DIMENSIONS MM / (IN)
SIZE
o g p q s b K e a w j l r h zz
15.90 10.30 50.80 31.80 19.10 50.80 13.50 76.20 88.90 94.40 31.80 20.60 33.30 61.10 41.90
204
(.626") (.406") (2.000") (1.252") (.752") (2.000") (.531") (3.000") (3.500") (3.717") (1.252") (.811") (1.311") (2.406") (1.650")
15.90 10.30 50.80 31.80 19.10 50.80 13.50 76.20 88.90 96.80 31.80 23.80 34.90 61.90 43.75
205
(.626") (.406") (2.000") (1.252") (.752") (2.000") (.531") (3.000") (3.500") (3.811") (1.252") (.937") (1.374") (2.437") (1.722")
15.90 10.30 56.40 37.30 21.80 57.20 13.50 88.90 102.40 112.80 37.30 27.80 42.90 69.90 43.00
206
(.626") (.406") (2.220") (1.469") (.858") (2.252") (.531") (3.500") (4.031") (4.441") (1.469") (1.094") (1.689") (2.752") (1.693")
15.90 12.70 64.30 37.30 21.80 64.30 13.50 88.90 102.40 128.80 37.30 30.20 51.00 77.80 49.40
207
(.626") (.500") (2.531") (1.469") (.858") (2.531") (.531") (3.500") (4.031") (5.071") (1.469") (1.189") (2.008") (3.063") (1.945")
19.10 15.90 83.30 49.20 29.00 83.30 17.50 102.00 114.30 144.50 49.20 33.30 56.40 88.10 52.30
208
(.752") (.626") (3.280") (1.937") (1.142") (3.280") (.689") (4.016") (4.500") (5.689") (1.937") (1.311") (2.220") (3.469") (2.059")
21.10 15.90 83.30 51.20 29.00 83.30 17.50 102.00 116.70 144.50 49.20 34.90 57.20 87.30 51.30
209
(.831") (.626") (3.280") (2.016") (1.142") (3.280") (.689") (4.016") (4.594") (5.689") (1.937") (1.374") (2.252") (3.437") (2.020")
19.10 15.90 83.30 49.20 29.00 85.70 17.50 102.00 116.70 148.40 49.20 37.30 58.70 89.70 51.30
210
(.752") (.626") (3.280") (1.937") (1.142") (3.374") (.689") (4.016") (4.594") (5.843") (1.937") (1.469") (2.311) (3.531") (2.020")
25.40 19.10 102.40 64.30 34.90 95.30 22.00 130.20 146.10 171.50 64.30 38.10 65.10 106.40 62.70
211
(1.000”) (.752”) (4.031”) (2.531”) (1.374”) (3.752”) (.866”) (5.126”) (5.752”) (6.752”) (2.531”) (1.500”) (2.563”) (4.189”) (2.469”)
31.80 19.10 102.40 64.30 34.90 102.40 22.00 130.20 146.10 193.70 64.30 42.10 74.60 119.10 66.05
212
(1.252”) (.752”) (4.031”) (2.531”) (1.374”) (4.031”) (.866”) (5.126”) (5.752”) (7.626”) (2.531”) (1.657”) (2.937”) (4.689”) (2.600”)
Protective end caps sold separately
Protective End Cap Specifications

SHAFT CAN PROTRUDE 6.35MM (.250”)

FROM BEARING INNER RING WITHOUT
INTERFERING WITH CAP

Closed Open
DIMENSIONS DIMENSIONS
PART SIZE PART SHAFT
MM / (IN) MM / (IN)
NUMBER NUMBER SIZE za zz DIAMETER
za zz
52.00 34.00 52.00 34.00 28.00
DC-204-MHE 204 DC-204-MHE-OPEN 204
(2.047") (1.339") (2.047") (1.339") (1.102”)
60.00 35.00 60.00 35.00 35.00
DC-205-MHE 205 DC-205-MHE-OPEN 205
(2.362") (1.378") (2.362") (1.378") (1.378”)
69.00 35.00 69.00 35.00 40.00
DC-206-MHE 206 DC-206-MHE-OPEN 206
(2.717") (1.378") (2.717") (1.378") (1.575)
76.00 40.70 76.00 40.70 47.00
DC-207-MHE 207 DC-207-MHE-OPEN 207
(2.992") (1.602") (2.992") (1.602") (1.850”)
86.00 40.00 86.00 40.00 50.00
DC-208-MHE 208 DC-208-MHE-OPEN 208
(3.386") (1.575") (3.386") (1.575") (1.969”)
92.00 40.00 92.00 40.00 55.00
DC-209-MHE 209 DC-209-MHE-OPEN 209
(3.622") (1.575") (3.622") (1.575") (2.165”)
97.00 40.00 97.00 40.00 60.00
DC-210-MHE 210 DC-210-MHE-OPEN 210
(3.819") (1.575") (3.819") (1.575") (2.362”)
106.00 50.00 106.00 50.00 67.00
DC-211-MHE 211 DC-211-MHE-OPEN 211
(4.173”) (1.969”) (4.173”) (1.969”) (2.638”)
116.00 50.00 116.00 50.00 76.00
DC-212-MHE 212 DC-212-MHE-OPEN 212
(4.567”) (1.969) (4.567”) (1.969) (2.992”)
 ABOUT PEER

Full line of agricultural, radial, mounted unit ball bearings and

tapered roller bearings
Valued bearing solutions for agricultural (including lawn
& garden), electrical, fluid (including HVAC), industrial
transmission, material handling (including baggage handling),
and off-highway applications
Global application engineering support
TS 16949 certified manufacturing facilities
Dedicated Research and Development center
Testing capabilities include: fatigue life, noise/vibration,
mud slurry and salt spray testing
Flexible manufacturing to allow for low to high volume
production
Customer service excellence

PEER also offers a

full line of bearing
units for the food and
beverage industry.
See our brochure PEER
Corrosion-Resistant
Bearing Units for
more information.

Brazil Italy
PEER Bearing Brazil PEER Bearing S.R.L.
Avenida Marginal do Ribeirão dos Via Paolo Nanni Costa, 12/3 A
Cristais, 200 40133 Bologna
Bloco 1.100 - Ref. Rodovia Anhaguera, Italy
Km 37 Phone: +39 051 6120405
Jordanésia – Cajamar, SP Brazil europe.info@peerbearing.com
CEP 07775-240
Phone: +55 11 4448-8200 United States
fale.conosco@skf.com PEER Bearing
2200 Norman Drive
China Waukegan, IL 60085
Shanghai PEER Bearing Co., Ltd. USA
9/F, Tower B, Central Towers Phone: +1 847 578 1000
#567 Langao Road info@peerbearing.com
Putuo District, Shanghai, 200333
P.R. China
Phone.: +86 21 61484816
sales@peerchina.com

www.peerbearing.com Germany
PEER Bearing GmbH
® PEER is a registered trademark of the PEER Group of Companies. Gruitener Str. 23
40699 Erkrath
™ Trusted Difference at Every Turn is a trademark of the
Germany
PEER Group of Companies. Phone: +49 2104 1 42 63 -0
MH ENG VER2_0816 europe.info@peerbearing.com