Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 75 views

    Calculation of Spool Lengths

    Uploaded by

    Salman Cader
    The document contains calculations and fabrication details for single bend, double bend U-type, and double bend Z-type spool pieces. It provides input data such as pipe lengths, angles, and elbow dimensions. It then shows the calculations to determine resulting angles and lengths. Finally, it lists fabrication details such as elbow offsets, straight pipe lengths, and tangential offsets.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Calculation of Spool Lengths

    Uploaded by

    Salman Cader
    75 views6 pages
    The document contains calculations and fabrication details for single bend, double bend U-type, and double bend Z-type spool pieces. It provides input data such as pipe lengths, angles, and elbow dimensions. It then shows the calculations to determine resulting angles and lengths. Finally, it lists fabrication details such as elbow offsets, straight pipe lengths, and tangential offsets.

    Original Description:

    Calculating Spool Lengths

    Original Title

    Calculation of Spool lengths

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains calculations and fabrication details for single bend, double bend U-type, and double bend Z-type spool pieces. It provides input data such as pipe lengths, angles, and elbow dimensions. It then shows the calculations to determine resulting angles and lengths. Finally, it lists fabrication details such as elbow offsets, straight pipe lengths, and tangential offsets.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    75 views6 pages

    Calculation of Spool Lengths

    Uploaded by

    Salman Cader
    The document contains calculations and fabrication details for single bend, double bend U-type, and double bend Z-type spool pieces. It provides input data such as pipe lengths, angles, and elbow dimensions. It then shows the calculations to determine resulting angles and lengths. Finally, it lists fabrication details such as elbow offsets, straight pipe lengths, and tangential offsets.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 6

    1.

    1 Calculation of Spool lengths based on subsea metrology


    Single Bend case

    Input data
    C
    Angle A = 90.0 degrees 1.571 radians
    Angle B = 25.5 degrees 0.445 radians
    Length AB = 15700 mm
    ü B
    Results :
    ü
    Angle C = 64.5 degrees 1.126 radians ü
    Length AC = 7489 mm A
    Length BC = 17394 mm
    Calculation OK

    1.2 Fabrication details -- Single Bend Case

    Elbow offsets :
    Elbow nom dia = 14 inches
    Elbow radius = 5 D
    Elbow angle = 116 degrees 2.016 radians
    Straight pup : C
    - A side = 0 mm 0 mm 14577 mm
    - B side = 0 mm
    Tangential offset :
    - A side = 2818 mm 4671 mm B
    - B side = 2818 mm

    End Flange offsets :


    - A side = 0 mm A
    - B side = 0 mm

    AC pipe = 4671 mm
    BC pipe = 14577 mm
    2.1 Calculation for Spool lengths based on subsea metrology
    Double Bend case -- U-type

    Input data C
    Angle A = 28 degrees 0.489 radians
    C2
    Angle B = 38 degrees 0.663 radians
    Length AB = 28320 mm
    Length AC1 = 4000 mm
    C1
    Angle C1 = 167 degrees 2.915 radians
    ü ü
    Calculations B
    Angle C = 114 degrees 1.990 radians ü
    Length AC = 19086 mm
    Length BC = 14554 mm ü
    Length CC1 = 15086 mm ü
    Length CC2 = 4249 mm A
    Results :
    Angle C2 = 127 degrees 2.217 radians
    Length C1C2 = 17256 mm
    Length BC2 = 10305 mm

    Calculation OK
    OK
    2.2 Fabrication details -- Double Bend Case -- U-type

    C1 elbow offsets :

    Elbow nom dia = 12 inches 16323 mm


    Elbow radius = 5 D C2
    Elbow angle = 13 degrees 0.227 radians 1000 mm
    Straight pup :
    - A side = 1000 mm
    - C2 side = 0 mm
    Tangential offset :
    C1
    - A side = 1174 mm 1000 mm
    - C2 side = 174 mm
    8085 mm B
    C2 elbowoffsets :

    Elbow nom dia = 12 inches


    Elbow radius = 5 D
    Elbow angle = 53 degrees 0.925 radians
    Straight pup :
    - B side = 1000 mm 2366 mm
    - C1 side = 0 mm
    Tangential offset :
    - B side = 1760 mm
    A
    - C1 side = 760 mm

    End Flange offsets :


    - A side = 460 mm
    - B side = 460 mm

    AC1 pipe = 2366 mm


    BC2 pipe = 8085 mm
    C1C2 pipe = 16323 mm
    3.1 Calculation for Spool lengths based on subsea metrology
    Double Bend case -- Zee type D
    Input data
    Angle A = 30 degrees 0.524 radians
    Angle B = 110 degrees 1.920 radians ü
    Length AB = 10000 mm
    Length AD = 25000 mm ü
    Angle D = 20 degrees 0.349 radians C
    X
    Calculations B
    Angle C = 120 degrees 2.094 radians
    ü
    Length AX = 14619 mm ü
    Length BX = 7779 mm
    ü
    Length DX = 10381 mm
    Length CX = 4100 mm
    A

    Results :
    Angle C = 120 degrees 2.094 radians
    Length BC = 11878 mm
    Length CD = 7705 mm

    Calculation OK
    3.2 Fabrication details -- Double Bend Case -- Zee type
    D
    B elbow offsets :
    Elbow nom dia = 12 inches
    Elbow radius = 5 D
    Elbow angle = 70 degrees 1.222 radians
    Straight pup : 5365 mm
    - A side = 1000 mm
    - C2 side = 1000 mm
    Tangential offset :
    C
    - A side = 2067 mm
    - C side = 2067 mm 7931 mm

    C elbowoffsets :
    Elbow nom dia = 12 inches
    Elbow radius = 5 D
    Elbow angle = 60 degrees 1.047 radians
    B
    Straight pup :
    - B side = 1000 mm
    - D side = 1000 mm
    Tangential offset : 7473 mm
    - B side = 1880 mm
    - D side = 1880 mm
    A
    End Flange offsets :
    - A side = 460 mm
    - D side = 460 mm

    AB pipe = 7473 mm
    BC pipe = 7931 mm
    CD pipe = 5365 mm

    You might also like