Voltage Regulator TLE 4274 / 3.3V;2.

5V

Features
• Output voltage: 3.3 V/2.5 V ± 4%
• Current capability 400 mA
• Very low current consumption
• Short-circuit proof
• Reverse polarity proof
• Suitable for use in automotive electronics
• Green Product (RoHS compliant)
P-SOT223-4
• AEC Qualified

Functional Description
The TLE 4274 / 3.3V;2.5V is a voltage regulator available
in a SOT223 and TO252 package. The IC regulates an
input voltage up to 40 V to VQrated = 3.3 V/2.5 V. The
maximum output current is 400 mA. The IC is short-
circuit proof and has a shutdown circuit protecting it
P-TO252-3-1
against overtemperature. The TLE 4274 is also available
as 5 V, 8.5 V and 10 V version. Please refer to the data
sheet TLE 4274.

Dimensioning Information on External Components

The input capacitor CI is necessary for compensating line influences. Using a resistor of
approx. 1 Ω in series with CI, the oscillating of input inductivity and input capacitance can
be damped. The output capacitor CQ is necessary for the stability of the regulation circuit.
Stability is guaranteed for capacities CQ ≥ 10 µF with an ESR of ≤ 2.5 Ω within the
operating temperature range.

Type Package
TLE 4274 GSV33 PG-SOT223-4
TLE 4274 DV33 PG-TO252-3-11
TLE 4274 GSV25 PG-SOT223-4

Data Sheet 1 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Circuit Description
The control amplifier compares a reference voltage to a voltage that is proportional to the
output voltage and drives the base of the series transistor via a buffer. Saturation control
as a function of the load current prevents any oversaturation of the power element. The
IC also includes a number of internal circuits for protection against:
• Overload
• Overtemperature
• Reverse polarity

PG-TO252-3-11 (D-PAK)
PG-SOT223-4
GND
Ι 1

GND 2 4 GND

Q 3
1 3
AEP02282

Ι Q
AEP02561

Figure 1 Pin Configuration (top view)

Table 1 Pin Definitions and Functions

Pin No. Symbol Function
1 I Input; block to ground directly at the IC with a ceramic capacitor.
2, 4 GND Ground; PG-TO252-3-11: internally connected to heatsink
3 Q Output; block to ground with capacitor CQ ≥ 10 µF, ESR ≤ 2.5 Ω

Data Sheet 2 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Temperature Saturation
Sensor Control and
Protection
Circuit

1 3
Ι Q
Control
Amplifier Buffer
Bandgap
Reference

2
GND
AEB02283

Figure 2 Block Diagram

Data Sheet 3 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Table 2 Absolute Maximum Ratings

Tj = -40 to 150 °C
Parameter Symbol Limit Values Unit Test Condition
Min. Max.
Input
Voltage VI -42 45 V –
Current II – – – Internally limited
Output
Voltage VQ -1.0 40 V –
Current IQ – – – Internally limited
Ground
Current IGND – 100 mA –
Temperature
Junction temperature Tj – 150 °C –
Storage temperature Tstg -50 150 °C –

Note: Maximum ratings are absolute ratings; exceeding any one of these values may
cause irreversible damage to the integrated circuit.

Table 3 Operating Range

Parameter Symbol Limit Values Unit Remarks
Min. Max.
Input voltage VI 4.7 40 V –
Junction temperature Tj -40 150 °C –
Thermal Resistance
Junction ambient Rthja – 100 K/W SOT2231)
Junction ambient Rthja – 70 K/W TO2522)
Junction case Rthjc – 25 K/W SOT223
Junction case Rthjc – 4 K/W TO252
2
1) Soldered in, 1 cm copper area at pin 4, FR4
2) Soldered in, minimal footprint, FR4

Data Sheet 4 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Table 4 Characteristics
VI = 6 V; -40 °C < Tj < 150 °C (unless otherwise specified)
Parameter Symbol Limit Values Unit Measuring Condition
Min. Typ. Max.
Output voltage VQ 3.17 3.3 3.44 V 5 mA < IQ < 400 mA
V33-Version 4.7 V < VI < 28 V
Output voltage VQ 3.17 3.3 3.44 V 5 mA < IQ < 200 mA
V33-Version 4.7 V < VI < 40 V
Output voltage VQ 2.4 2.5 2.6 V 5 mA < IQ < 400 mA
V25-Version 4.7 V < VI < 28 V
Output voltage VQ 2.4 2.5 2.6 V 5 mA < IQ < 200 mA
V25-Version 4.7 V < VI < 40 V
Output current IQ 400 600 – mA –
limitation1)
Current consumption; Iq – 100 220 µA IQ = 1 mA
Iq = II - IQ
Current consumption; Iq – 8 15 mA IQ = 250 mA
Iq = II - IQ
Current consumption; Iq – 20 30 mA IQ = 400 mA
Iq = II - IQ
Drop voltage1) Vdr – 0.7 1.2 V IQ = 300 mA
V33-Version Vdr = VI - VQ
Drop voltage1) Vdr – 1.0 2.0 V IQ = 300 mA
V25-Version Vdr = VI - VQ
Load regulation ∆VQ – 40 70 mV IQ = 5 mA to 300 mA;
VI = 6 V
Line regulation ∆VQ – 10 25 mV ∆Vl = 12 V to 32 V
IQ = 5 mA
Power supply ripple PSRR – 60 – dB fr = 100 Hz;
rejection Vr = 0.5 Vpp
Temperature output dVQ/dT – 0.5 – mV/K –
voltage drift
1) Measured when the output voltage VQ has dropped 100 mV from the nominal value obtained at VI = 6 V.

Data Sheet 5 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Ι Q
1 4

TLE 4274 GSV33

VΙ CQ CΙ 2, 4 CQ
VQ R Load
100 µ F 100 nF GND 10 µF

AES02284

Figure 3 Measuring Circuit

5 - 40 V Ι 1 4 Q 3.3 V / 2.5 V
Input Output

TLE 4274 GSV33

CΙ CQ
100 nF 10 µF
2, 4
GND
AES02285

Figure 4 Application Circuit

Data Sheet 6 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Ι Q 10 V
4.5 - 40 V
CΙ CQ1 e.g. to sensor
470 nF TLE 4276 22 µF

INH
1 kΩ e.g. to µC

GND

Ι Q 3.3 V
TLE 4274 GSV33 to µC
CQ2
10 µF

GND AES02579

Figure 5 Application Example

Data Sheet 7 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Typical Performance Characteristics

Output Voltage VQ versus Output Voltage VQ versus
Junction Temperature Tj (V33-Version) Junction Temperature Tj (V25-Version)
AED02288 AED02806
3.5 2.7
VQ V VQ V
3.4 2.6

VI = 6 V VI = 6 V
3.3 2.5

3.2 2.4

3.1 2.3

3.0 2.2

2.9 2.1
-40 0 40 80 120 ˚C 160 -40 0 40 80 120 ˚C 160
Tj Tj

Input Current Iq versus Input Current Iq versus

Input Voltage VI (V33-Version) Input Voltage VI (V25-Version)
AED01969 AED03016
3.5 3.5
mA mA
II II
3.0 3.0

2.5 2.5

2.0 2.0

T j = 25 ˚C T j = 25 ˚C
1.5 1.5
R I = 3.3 k Ω R I = 3.3 k Ω

1.0 1.0

0.5 0.5

0 0

-2 -2
-50 -25 0 25 V 50 -50 -25 0 25 V 50
VI VI

Data Sheet 8 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Current Consumption Iq versus Current Consumption Iq versus

Output Current IQ (low load) Output Current IQ (high load)
AED02268 AED02267
0.6 60
Iq mA Iq mA
0.5 50

T j = 25 ˚C
0.4 40
VI = 13.5 V

T j = 25 ˚C
0.3 30
VI = 13.5 V

0.2 20

0.1 10

0 0
0 10 20 30 40 mA 60 0 100 200 300 400 mA 600
IQ IQ

Output Current IQ versus Region of Stability

Input Voltage VI for CQ = 10 µF
AED02287 AED03050
800 10
Ω
ESR 9
mA
ΙQ 8
600
7
T j = 25 C 6
VQ = 0 V
400 5

3
200
2

0 0
0 10 20 30 40 V 50 0.2 100 101 102 mA 500
VΙ IQ

Data Sheet 9 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Package Outlines

6.5 ±0.2 1.6 ±0.1

A
3 ±0.1 0.1 MAX.

B
4

15˚ MAX.
+0.2
acc. to
DIN 6784

3.5 ±0.2
7 ±0.3
0.5 MIN.
1 2 3

0.7 ±0.1 2.3 0.28 ±0.04

4.6

0.25 M A 0.25 M B

GPS05560

Figure 6 PG-SOT223-4 (Plastic Small Outline Transistor)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products
and to be compliant with government regulations the device is available as a green
product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable
for Pb-free soldering according to IPC/JEDEC J-STD-020).

You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.

SMD = Surface Mounted Device Dimensions in mm

Data Sheet 10 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

6.5 +0.15
-0.10
2.3 +0.05
-0.10
A
5.4 ±0.1 B 0.9 +0.08
-0.04
1 ±0.1

0.8 ±0.15
6.22 -0.2
9.9 ±0.5

0.51 min
0.15 max 0...0.15
per side 3x
0.75 ±0.1 0.5 +0.08
-0.04

2.28 1 ±0.1
4.57
0.25 M A B 0.1
GPT09051

All metal surfaces tin plated, except area of cut.

Figure 7 PG-TO252-3-11 (Plastic Transistor Single Outline)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products
and to be compliant with government regulations the device is available as a green
product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable
for Pb-free soldering according to IPC/JEDEC J-STD-020).

You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.

SMD = Surface Mounted Device Dimensions in mm

Data Sheet 11 Rev. 2.3, 2008-03-10

 TLE 4274 / 3.3V;2.5V

Revision History

Version Date Changes

Rev. 2.3 2008-03-10 Simplified package name to PG-SOT223-4.
No modification of released product.
Rev. 2.2 2007-03-20 Initial version of RoHS-compliant derivate of TLE 4274 /
3.3V;2.5V
Page 1: AEC certified statement added
Page 1 and Page 10: RoHS compliance statement and
Green product feature added
Page 1 and Page 10: Package changed to RoHS compliant
version
Legal Disclaimer updated

Data Sheet 12 Rev. 2.3, 2008-03-10

Edition 2008-03-10
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2008 Infineon Technologies AG
All Rights Reserved.

Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.

Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).

Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.