Specification Data CF5000

9/92

Camflex® II
35002 Series
Second Generation
Rugged, All-Purpose
Automatic Control Valves
SD CF5000 9/92
35002 Series

Table of Contents
Numbering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Actuator Mounting Guides . . . . . . . . . . . . . . . . . . . . . . 3 Options
General Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4,5 Slurry Package Trim Options . . . . . . . . . . . . . . . . . . . 8
Ratings and Connections . . . . . . . . . . . . . . . . . . . . . . . 5 EF Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Temperature Range/Seat Leakage . . . . . . . . . . . . . . . . 6 Allowable Pressure Drops . . . . . . . . . . . . . . . . . . . 10-17
Standard Actuator Sizes and Travel Times . . . . . . . . . 6 Dimensions and Weights . . . . . . . . . . . . . . . . . . . 18, 19
Flow Coefficients/Critical Flow Factor . . . . . . . . . . . . 6, 7 Accessories and Options . . . . . . . . . . . . . . . . . . . . . . 20

Foreword
The Camflex® II is a heavy duty automatic throttling • A large variety of reduced trim options are available in
control valve which incorporates into its design the all sizes.
following features: • The triple, over-sized bearing system provides
exceptional plug shaft guiding.
• Flangeless body rating is a rugged ANSI Class 600. • Optional alloy construction is available.
• Heavy duty guide lugs assure quick, positive • Powerful, low profile spring diaphragm actuator guaran-
alignment during installation. tees positive “fail-safe” action.
• Flanged version available through 6" in 150 or 300 • Splined shaft and actuator linkages, combined with other
ANSI flanges. (For 8" through 16", consult factory.) low friction techniques, assure minimum deadband and
• Straight through flow pattern provides greater flow hysteresis.
capacities. • A 3-15 spring is available in valve sizes through 4".
• Standard integral extension bonnet allows for a wide • Large, highly visible valve position indicator.
range of fluid temperature applications (-320°F to • Totally enclosed actuator linkage (purge option avail-
750°F). able).
• The unique self-aligning eccentric rotating plug • Combination handwheel/adjustable limit stop with
provides tight shut off and low dynamic forces. lockingmechanism standard.
• Slurry package available in all sizes.
• Complete line of options and accessories.
Numbering System

1st 2nd 1st 2nd 3rd 4th 5th

3 5 2

Actuator Type Body Actuator Mounting Trim Design

Series (See guide on page 3) Type Series

20 Manual actuator 1. Parallel to pipeline, valve closes

1. Metal
35 on stem extension. 2
35 Spring-opposed Seat
rolling-diaphragm 2. Parallel to pipeline, valve opens
2. Soft
on stem extension.
70 Double-acting Seat
cylinder (note 1, 3. Perpendicular to pipeline, valve
page 3) closes on stem extension.
4. Perpendicular to pipeline, valve
opens on stem extension.
5. Parallel to pipeline, valve closes
on stem extension.
6. Parallel to pipeline, valve opens
on stem extension.
7. Perpendicular to pipeline, valve
closes on stem extension.
8. Perpendicular to pipeline, valve
opens on stem extension.

© 1997 Dresser Industries, Inc. 2 Trade names noted throughout are for reference only. Masoneilan
All rights reserved. reserves the right to supply trade named material or its equivalent.
 SD CF5000 9/92
35002 Series

Actuator Mounting Guide

Model Number - 35__02

AIR TO CLOSE / SPRING FAIL OPEN

AIR TO OPEN / SPRING FAIL CLOSE

FLOW
DIRECTION

FLOW TO OPEN

AIR TO OPEN / SPRING FAIL CLOSE

AIR TO CLOSE / SPRING FAIL OPEN

FLOW
DIRECTION

FLOW TO CLOSE

Notes:
1. The Model 70 double acting cylinder actuator must be assembled in position 2, 4, 6 or 8 only, to close valve on actuator stem retraction.
The air action can be either air to open or air to close.
2. It is recommended that the actuator always be mounted as shown above. For other positions, consult local sales office.
3. Construction showing actuators in solid lines are preferred.
4. Installation is assumed to be in horizontal pipeline for orientation of airset and other accessories unless specified on order.
5. Action and orientation field reversible without additional parts. See Instruction EF5000.
6. Operating efficiencies may vary depending on valve configuration.
7. The above schematic does not reflect every possible body/actuator configuration, but should provide sufficient info to guide you in your
selection.

3
SD CF5000 9/92
35002 Series

General Data

Body Actuators
type: cast with integral bonnet
flow direction: flow to open Spring-Opposed Rolling Diaphragm
flow to close size: 41/2" diameter with 31/2" stroke
materials: carbon steel (1" - 2" valves)
316 stainless steel 6" diameter with 53/4" stroke
➀
Alloy 20 (1" - 2" threaded) (3" - 4" valves)
(1" - 4" flangeless) 7" diameter with 71/4" stroke
Hastelloy “C” (6" - 14" valves)
body pressure rating: ANSI Class 600 (per B16.34) range: 7-15 psi (1" - 4")
standard (1" - 12") except for 7-24 psi (6" - 14")
flanged construction, valve rating 3-15 psi (1" - 4")
is limited by flange rating air connection: 1
/4" NPT
end connections: threaded - NPT for ANSI Class 600 yoke: cast iron
rated connectons (1" - 2")
bearing: sealed radial ball
flangeless - clamps between
auxiliary handwheel: solid disk with locking nut:
ANSI Class 150, 300 or 600 rated
62/5" diameter (1" - 4" valves)
flanges (flange rating must be
and 10" diameter (6" - 14" valves)
specified for 8" - 12" valve for locator
lug drilling and tapping)
flanged - bolts to Double Acting Piston
ANSI Class 150 or 300 rated sizes: 10" diameter (6" - 14" valves)
flanges (1" - 6", standard; 12" diameter for 16" valve
8" - 16", consult factory) 3
air connection: /8" NPT
Trim
yoke and bracket: cast iron
plug type: self-aligning eccentrically rotating
bearing: sealed radial ball
materials: 1" - 4" solid Stellite No. 6 (3" and 4" for
auxiliary handwheel: solid disk with locking nut:
slurry trim only)
10" diameter (6" - 14" valves)
3" - 16" 316 stainless steel with
handjack: manual pump override
hard seating surface
for 16" valve
1" - 4" Hastelloy “C”
seat ring: solid clamped
Manual Actuator
materials: 1" - 12" 316 stainless steel
type: solid disk with detent
1" - 4" Hastelloy “C”
anti-rotation device
1" - 4" solid Stellite No. 6
6" - 16" 316 stainless steel sizes: 7" diameter (1" - 2" valves)
with hardfaced seat 87/8" diameter (3" and 4" valves)
1" - 14" 316 stainless steel 161/8" diameter (6" - 12" valves)
with PTFE insert (to 450°F)* material: aluminum
capacity: full area and reduced capacity yoke: cast iron
in all sizes
bearing: sealed radial ball
flow characteristic: linear
Cv ratio: 100:1

*Not available in .2 Factor trim size

➀
Use 316 St. St. construction pressure drop tables.
The ANSI temperature range is -20˚F to 300˚F, for applications outside this range, consult factory.

4
 SD CF5000 9/92
35002 Series

General Data

Standard Materials Furnished with Listed Body Materials

Body Material Carbon Steel 316 Stainless Steel Alloy 20 and Hastelloy “C”
Packing Crane 285K - Asbestos Free Crane 285K - Asbestos Free Crane 285K - Asbestos Free
Solid Stellite (1" - 2") Solid Stellite (1" - 2")
Plug 316 St. St./HF-seat only 316 St. St./HF-seat only Hastelloy “C”
(3" - 16") (3" - 16")
316 St. St. (1" - 12") 316 St. St. (1" - 12")
Seat Ring
316 St. St. w/HF (14" and 16") 316 St. St. w/HF (14" and 16") Hastelloy “C”
Seat Ring Retainer 316 St. St. 316 St. St. Hastelloy “C”
Bearing 440C St. St. Stellite Alloy 25
Shaft 17-4 PH St. St. 316 St. St. Hastelloy “C”

Notes:
1. The carbon steel body is also available with a 316 St. St. shaft and stellite bearings for corrosive or NACE type service.
The stellite bearings must be used with the 316 St. St. shaft.
2. The alloy trim package shown with the Alloy 20 body is also available in the carbon steel and 316 St. St. bodies for
corrosive environments requiring high alloy trim parts.

Standard Spring Diaphragm Actuator Materials

Description Material
Yoke Cast Iron
Yoke Covers Polycarbonate
Spring Barrel Die Cast Aluminum Option - Cast Iron
Diaphragm Case Die Cast Aluminum Option - Cast Iron
Piston Die Cast Aluminum Option - Cast Iron
Diaphragm Buna-N with Dacron insert
Piston Rod 303 St. St.
Clevis St. St.
Clevis Pin 17-4 PH (H1075) St. St.
Lever Steel with epoxy surface

Lever Bearing PTFE filament surface bonded to

glass-reinforced plastic backing
Handwheel and Locknut Aluminum

Ratings and Connections

∆ Threaded Valve ANSI Class

Size
(in.) 150 300 600
● Flangeless
1-2 ∆ ● ∆ ● ∆●
RF Flanged 3 - 12 ● ● ●
14 and 16 -

Note: For flangeless valve sizes 8"-12",

please specify ANSI Class rating. Face to Face: ISA S75.04

5
SD CF5000 9/92
35002 Series

Temperature Range/Seat Leakage

Valve Temperature Range Maximum Seat

Size Seat Leakage, ANSI
(in.) Type Min. Max. FCI/70.2 Class

Metal -320°F* +750°F IV

1 - 12
Soft Seat -320°F* +450°F VI

Metal -320°F* +450°F IV

14
Soft Seat -320°F* +450°F VI

16 Metal -320°F* +450°F IV Temperature Gradient Across Bonnet

The ability of the Camflex valve to handle a wide range of process
*St. St. bodies only
fluid temperatures is due to the long, integrally-cast bonnet. This
affords ample radiation surface to normalize the packing
temperatures.

Maximum Rated Flow Coefficients (Cv) and Critical Flow Factors (FL) at Maximum Opening (50˚)

Valve Full Reduced Trim Critical Flow Factor (FL)

Size Area
(in.) Trim .6 .4 .2 Trim Flow Flow
Size to to
1 14 8.4 5.6 2.8 Close Open
11/2 30 18 12 6 Full Area .68 .85
2 50 30 20 10
Reduced Trim .70 .88
3 135 81 54 --
4 230 138 92 --
6 500 300 200 --
8 850 510 340 --
10 1300 780 520 --
12 1750 1050 700 --
14 2350 1410 940 --
16 3650 2190 1460 --

Standard Actuator Sizes and Travel Times*

Travel Times (sec.)

Actuator Actuator
Valve Shaft Diameter (in.) Effective Area (sq. in.) Actuator HW Increasing Decreasing
Size Diameter Stroke Diameter Inst. Signal Inst. Signal
(in.) (in.) (in.) (in.)
Double Double Double Double
Spring Spring Spring Spring
Acting Acting Acting Acting
Diaphragm Diaphragm Diaphragm Diaphragm
Cylinder Cylinder Cylinder Cylinder

1
11/2 5/
8 41/2 ----- 14 ----- 31/2 6 1.2 ----- 2.4 -----
2
3 1
6 ----- 24 ----- 53/4 6 3.0 ----- 6.3 -----
4 11/4
6 11/2
8 11/2
10 13/4 7 10 36 80 71/4 10 7.6 26 9.8 17
12 2
14 21/2
16 21/2 ----- 12 ----- 112 10 ----- ----- 36 ----- 19

*Measured with direct positioner, 30 psi supply

6
 SD CF5000 9/92
35002 Series

Flow Coefficients (Cv) and Critical Flow Factors (FL) at % of Plug Rotation

Flow Direction: Flow to close or flow to open

Flow Characteristics: Linear
ANSI Class: 150 through 600 **
Sizes: 1" through 16"

Percent of Plug Rotation 10 20 30 40 50 60 70 80 90 100

FL Flow to Open 0.96 0.93 0.91 0.89 0.88 0.87 0.87 0.86 0.86 0.85
Flow to Close 0.94 0.91 0.88 0.83 0.80 0.77 0.74 0.72 0.70 0.68
Valve Orifice Actuator
Size Diameter Stem Rated Cv *
(in.) (in.) Travel (in.)
.321 3.50 0.2 0.4 0.7 1.2 1.5 1.9 2.2 2.4 2.6 2.8
.500 3.50 0.4 0.9 1.4 2.0 2.7 3.5 4.2 4.8 5.3 5.6
1
.579 3.50 0.6 1.3 2.1 3.2 4.3 5.4 6.4 7.2 7.9 8.4
.718 3.50 0.8 2.1 3.6 5.8 7.7 9.5 11.0 12.0 13.0 14
.503 3.50 0.4 0.9 1.6 2.4 3.4 4.0 4.8 5.2 5.8 6
.750 3.50 1.0 1.9 3.0 4.3 5.9 7.6 9.0 10.0 11.0 12
11/2
.907 3.50 1.3 2.9 4.5 6.8 9.2 11.6 13.7 15.5 17.0 18
1.125 3.50 1.8 4.5 7.8 12.0 17.0 20.0 24.0 26.0 29.0 30
.643 3.50 0.6 1.5 2.6 4.2 5.6 6.8 8.0 8.8 9.6 10
1.000 3.50 1.6 3.2 5.0 7.2 9.8 13 15 17 19 20
2
1.159 3.50 2.1 4.8 7.8 11.2 15.3 19 23 26 28 30
1.437 3.50 3.0 7.5 13.0 21 28 34 40 44 48 50
1.500 5.75 4.9 9.2 14.0 20 26 33 40 45 50 54
3 1.874 5.75 5.7 12.2 19.4 28 37 48 59 68 75 81
2.324 5.75 8.1 18 31 45 61 78 96 113 126 135
2.000 5.75 8.3 16 24 34 45 57 68 77 86 92
4 2.419 5.75 9.7 21 33 47 63.5 81 99 115 130 138
3.000 5.75 14 30 53 76 104 133 163 192 214 230
3.000 7.25 18 34 52 74 98 124 147 168 186 200
6 3.629 7.25 21 45 72 102 138 177 216 252 282 300
4.500 7.25 30 65 115 165 225 290 355 418 465 500
3.797 7.25 24 44 71 107 148 197 241 279 316 340
8 4.840 7.25 32 61 112 179 247 311 372 423 472 510
6.000 7.25 43 111 200 319 434 544 638 723 795 850
4.746 7.25 36 68 109 164 226 302 369 426 481 520
10 6.050 7.25 52 94 172 273 378 476 569 647 722 780
7.500 7.25 72 169 306 488 663 832 975 1110 1220 1300
5.780 7.25 49 91 147 221 305 406 497 574 648 700
12 7.460 7.25 70 126 231 368 509 641 767 872 971 1050
9.250 7.25 100 228 411 656 893 1120 1310 1490 1640 1750
6.811 7.25 66 122 197 297 410 545 667 771 870 940
14 8.799 7.25 94 169 310 494 684 861 1030 1171 1304 1410
10.748 7.25 134 306 552 881 1199 1504 1759 2001 2202 2350
8.534 10.00 102 190 307 461 636 847 1037 1197 1352 1460
16 10.437 10.00 146 263 482 768 1062 1337 1600 1819 2025 2190
13.500 10.00 209 476 857 1368 1863 2336 2732 3108 3421 3650

* Cv values shown are for flow to open

** ANSI Class: 150-300 Size: 14" and 16"
Caution: Cv values shown are based on ideal flow characteristics. Values are averaged and may vary.

7
SD CF5000 9/92
35002 Series

Materials

Options
Slurry Package Trim Options EF Seal
(Emission Free)
16 17
Double O-Ring Seal Packing Follower
Fugitive Emission Containment Package for Zero Leakage †

17

17 15

17

Providing zero leakage against dangerous emissions,

Masoneilan offers a double O-ring sealed packing box. This
economical solution to fugitive emissions won’t compromise
control performance, and allows its use in environmentally
sensitive applications.
†
Factory Mutual Certified Report

8
 SD CF5000 9/92
35002 Series

Materials

Ref. Temperature Range -320˚F -100˚F -20˚F +300˚F +400˚F +450˚F +750˚F
No. Description Materials
A479 Type 316 ➀
1 Shaft A564 Type 17-4 PH ➁
Hastelloy “C” (1"-4")
304 St. St. ASTM A193 Gr B8
2 Packing Flange Studs
Hastelloy “C” (1"-4")
304 St. St. ASTM A194 Gr 8
3 Packing Flange Stud Nuts
Hastelloy “C” (1"-4")
A105 Carbon Steel
4 Packing Flanges
Hastelloy “C” (1"-4")
A582 Type 303 St. St.
5 Packing Follower
Hastelloy “C” (1"-4")
5A EF Seal A582 Type 303 St. St. with 2 Viton O-Rings
6 Packing Crane 285K / Optional Graphite, Teflon and Low Emission Packing Systems
A312 Type 304
7 Spacer Tube
Hastelloy “C” (1"-4")
A216 Carbon Steel
316 St. St. ASTM A351 Gr CF8M
8 Body
Alloy 20 (1"-4")
Hastelloy “C” (1"-4")
304 St. St. ASTM A193 Gr B8
9 Valve Body Studs
Hastelloy “C” (1"-4")
304 St. St. ASTM A194 Gr 8
10 Valve Body Stud Nuts
Hastelloy “C” (1"-4")
A479 Type 316 (1"-3") A351 Type 316 (4"-12") A351 Type 316 w/HF (14" and 16")
Stellite No. 6 (1"-4") ➂
11 Seat Ring 316 St. St. w/PTFE (Does not comply with NACE MR-01-75) ≈
316 St. St. w/hardfacing (316 St. St. w/Full Bore Hardfacing 6"-16" ➂)
Hastelloy “C” (1"-4")
Stellite No. 6 (1"-2" Standard Construction), (1"-4") ➂
12 Plug A351 Type 316 w/hardfacing (3"-16")
Hastelloy “C” (1"-4")
A351 Type 316
13 Seat Ring Retainer
Hastelloy “C” (1'-4")
A479 Type 316
14 Packing Box Ring
Hastelloy “C” (1"-4")
A276 Type 440
15, 16 Guide Bushings Stellite No. 6 ➂
Alloy 25 (1"-4")
17 O-Rings Viton® ➂ √ ➄ (11/2"-16")
18 Retainer Ring A564 Gr 632

➀ For Carbon Steel and St. St. construction, Stellite No. 6 bushings must be used.
➁ Standard material for Carbon Steel construction.
➂ For slurry applications.
√ The Viton O-rings begin to lose flexibility at -20°F; however, they have been used down to -250°F to act as a convection flow barrier.
➄ Not available for 1" valve.
≈ Not available for .2 Factor trim size.
Note: For complete listing of parts, see Parts Supplement FF5000.

9
SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Metal Seat - Carbon Steel, Stainless Steel and Alloy Construction (3-15 Spring) Diaphragm Actuator
Flow to Close - Air to Open
Valve
Size Cv Flow to Close Supply Supply Supply Supply Supply Supply
(in.) Air to Close 20 psig 25 psig 30 psig 35 psig 40 psig 45 psig

14 1000 500 ------ ------ ------ ------ ------

1 8.4 1450 750 ------ ------ ------ ------ ------
5.6 1450 750 ------ ------ ------ ------ ------
2.8 1450 750 ------ ------ ------ ------ ------
30 360 400 400 ------ ------ ------ ------
18 560 600 650 ------ ------ ------ ------
11/2 12 775 700 750 ------ ------ ------ ------
6 775 700 750 ------ ------ ------ ------
50 200 230 300 300 ------ ------ ------
30 300 350 500 500 ------ ------ ------
2 20 400 470 500 500 ------ ------ ------
10 400 470 500 500 ------ ------ ------
135 150 180 300 300 ------ ------ ------
3 81 235 270 450 450 ------ ------ ------
54 350 400 500 500 ------ ------ ------
230 100 90 200 300 300 300 300
4 138 125 140 300 490 500 500 500
92 175 200 300 500 500 500 500

Note: For FTO/ATC 3-15 allowable pressure drops refer to the 7-15 table below
The FTO/ATO orientation is not recommended for 3-15 range

Metal Seat - Carbon Steel, Stainless Steel and Alloy Construction (7-15 Spring) Diaphragm Actuator

Flow to Open - Air to Close

Flow to Close - Air to Open
Valve
Size Cv Flow to Close Flow to Open Supply Supply Supply Supply Supply Supply
(in.) Air to Close Air to Open 20 psig 25 psig 30 psig 35 psig 40 psig 45 psig

14 1000 1000 1000 ------ ------ ------ ------ ------

8.4 1450 1450 1450 ------ ------ ------ ------ ------
1
5.6 1450 1450 1450 ------ ------ ------ ------ ------
2.8 1450 1450 1450 ------ ------ ------ ------ ------
30 490 670 430 800 ------ ------ ------ ------
18 740 1000 640 1375 ------ ------ ------ ------
11/2
12 1000 1400 900 1450 ------ ------ ------ ------
6 1000 1400 900 1450 ------ ------ ------ ------
50 270 360 230 500 600 ------ ------ ------
30 410 560 350 760 1000 ------ ------ ------
2
20 540 740 470 1000 1000 ------ ------ ------
10 540 740 470 1000 1000 ------ ------ ------
135 200 280 180 380 600 ------ ------ ------
3 81 320 420 270 580 930 ------ ------ ------
54 460 640 400 870 1000 ------ ------ ------
230 100 140 90 200 320 440 560 600
4 138 160 220 140 300 490 670 860 1000
92 230 310 200 430 700 970 1000 1000

10
 SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Metal Seat - Carbon Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator➀
Flow to Flow to Flow to Open - Air to Close
Valve Preload Close Open Flow to Close - Air to Open
Act. Flow
Size Press. - -
Type Direction
(in.) Cv (psig) Air to Air to Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
Close* Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO ------ 90 50 130 200 300 360 440 520 600 ------ ------
Dia. ------ FTC Gas 140 ------ 50 130 200 300 360 440 520 600 ------ ------
500
FTC Liq. 140 ------ 50 130 200 300 300 300 300 300 ------ ------
Cyl. 15 FTO & FTC ------ ------ 400 600 ------ ----- ------ ------ ------ ------ ------ ------
FTO ------ 131 70 180 300 400 500 620 730 850 ------ ------
Dia. ------ FTC Gas 220 ------ 70 180 300 400 500 620 730 850 ------ ------
6 300
FTC Liq. 220 ------ 70 180 300 400 425 425 425 425 ------ ------
Cyl. 15 FTO & FTC ------ ------ 620 880 ------ ------ ------ ------ ------ ------ ------ ------
FTO ------ 200 110 280 450 620 800 970 1000 ------ ------ ------
Dia. ------ FTC Gas 310 ------ 110 280 450 620 800 970 1000 ------ ------ ------
200
FTC Liq. 310 ------ 110 280 450 500 500 500 500 ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 880 1000 ------ ------ ------ ------ ------ ------ ------ ------
FTO ------ 45 25 60 100 140 180 220 260 300 340 350
Dia. ------ FTC Gas 70 ------ 25 60 100 140 180 ------ ------ ------ ------ ------
850
FTC Liq. 70 ------ 25 60 90 90 90 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 220 280 350 ------ ------ ------ ------ ------ ------ ------
FTO ------ 70 40 100 160 220 280 340 400 460 520 550
Dia. ------ FTC Gas 110 ------ 40 100 160 220 280 ------ ------ ------ ------ ------
8 510
FTC Liq. 110 ------ 40 100 140 140 140 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 310 430 550 ------ ------ ------ ------ ------ ------ ------
FTO ------ 110 60 160 250 350 450 550 640 740 840 900
Dia. ------ FTC Gas 180 ------- 60 160 250 350 450 ------ ------ ------ ------ ------
340
FTC Liq. 180 ------ 60 160 220 220 220 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 500 700 900 ------ ------ ------ ------ ------ ------ ------
FTO ------ 25 15 35 55 80 100 120 140 160 180 210
Dia. ------ FTC Gas 40 ------ 15 35 55 80 100 ------ ------ ------ ------ ------
1300 FTC Liq. 40 ------ 15 35 50 50 50 ------ ------ ------ ------ ------
Cyl. 15 ------ ------ 110 150 200 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ ------ 200 240 280 300 ------ ------ ------
FTO ------ 40 20 50 80 120 150 180 220 250 280 320
Dia. ------ FTC Gas 60 ------ 20 50 80 120 150 ------ ------ ------ ------ ------
10 780 FTC Liq. 60 ------ 20 50 70 70 70 ------ ------ ------ ------ ------
Cyl. 15 ------ ------ 170 230 300 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ ------ 300 360 430 500 ------ ------ ------
FTO ------ 60 35 90 140 190 240 300 350 400 460 510
Dia. ------ FTC Gas 100 ------ 35 90 140 190 240 ------ ------ ------ ------ ------
520 FTC Liq. 100 ------ 35 90 120 120 120 ------ ------ ------ ------ ------
Cyl. 15 ------ ------ 270 380 480 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ----- ------ ------ 480 580 690 800 ------ ------ ------
FTO ------ 15 ------ 20 30 45 55 70 80 90 100 120
Dia. ------ FTC Gas 20 ------ ------ 20 30 45 55 60 ------ ------ ------ ------
FTC Liq. 20 ------ ------ 20 30 30 30 30 ------ ------ ------ ------
1750
15 ------ ------ 60 90 110 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ ------ 110 130 160 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ ------ 160 180 200 230
FTO ------ 20 10 30 50 70 90 100 120 140 160 180
Dia. ------ FTC Gas 35 ------ 10 30 50 70 90 ------ ------ ------ ------ ------
12 FTC Liq. 35 ------ 10 30 45 45 45 ------ ------ ------ ------ ------
1050
15 ------ ------ 100 130 170 ------ ------ ------- ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ ------ 170 200 240 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ ------ 240 280 320 350
FTO ------ 35 20 50 80 110 140 180 210 240 270 300
Dia. ------ FTC Gas 60 ------ 20 50 80 110 140 ------ ------ ------ ------ ------
FTC Liq. 60 ------ 20 50 70 70 70 ------ ------ ------ ------ ------
700
15 ------ ------ 160 220 280 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ ------ 280 340 400 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ ------ 400 460 520 600

FTO: Flow to open (liquid and gas) FTC: Flow to close

➀ When substituting the 316 St. St. shaft for the standard 17-4 PH St. St. shaft refer to the 316 St. St. construction
allowable pressure drop tables due to the lower shaft allowable torque values.

11
SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Metal Seat - Carbon Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator
Flow to Flow to Flow to Open - Air to Close
Valve Preload Close Open Flow to Close - Air to Open
Act. Flow
Size Cv Press. - -
Type Direction Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
(in.) (psig) Air to Air to
Close Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO ------ 7 ------ 10 18 25 31 38 44 51 58 65
Dia. ------ FTC Gas ------ ------ ------ 10 18 25 31 ------ ------ ------ ------ ------
2350 FTC Liq. ------ ------ ------ 10 15 ------ ------ ------ ------ ------ ------ ------
15 FTO/FTC ------ 37 37 57 67 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 Gas & ------ 57 ------ ------ ------ ------ 85 98 ------ ------ ------ ------
Liquid
25 ------ 67 ------ ------ ------ ------ ------ ------ ------ 115 126 144
FTO ------ 11 5 17 28 37 47 56 67 77 87 98
Dia. ------ FTC Gas ------- ------ 5 17 28 37 47 ------ ------ ------ ------ ------
FTC Liq. ------ ------ 5 17 28 ------ ------ ------ ------ ------ ------ ------
14 1410
15 FTO/FTC ------ 57 56 85 100 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 Gas & ------ 85 ------ ------ ------ ------ 126 146 ------ ------ ------ ------
Liquid
25 ------ 100 ------ ------ ------ ------ ------ ------ ------ 172 187 214
FTO ------ 18 10 28 45 62 79 98 112 129 146 163
Dia. ------ FTC Gas ------ ------ 10 28 45 62 79 ------ ------ ------ ------ ------
940 FTC Liq. ------ ------ 10 28 45 ------ ------ ------ ------ ------ ------ ------
15 FTO/FTC ------ 94 94 140 169 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 Gas & ------ 140 ------ ------ ------ ------ 211 243 ------ ------ ------ ------
Liquid
25 ------ 169 ------ ------ ------ ------ ------ ------ ------ 287 315 358
15 FTO/FTC ------ ------ 68 ------ 104 ------ 158 ------ 194 216 ------ ------
3650 Cyl. 20 Gas & ------ ------ 38 ------ 83 ------ 129 ------ 174 196 ------ ------
Liquid
25 ------ ------ ------ ------ 68 ------ 104 ------ 160 175 ------ ------
15 FTO/FTC ------ ------ 100 ------ 174 ------ 262 ------ 322 360 ------ ------
16 2190 Cyl. 20 Gas & ------ ------ 64 ------ 139 ------ 214 ------ 289 327 ------ ------
Liquid
25 ------ ------ ------ ------ 100 ------ 174 ------ 262 289 ------ ------
15 FTO/FTC ------ ------ 152 ------ 265 ------ 378 ------ 450 ------ ------ ------
1460 Cyl. 20 Gas & ------ ------ 96 ------ 209 ------ 322 ------ 435 ------ ------ ------
Liquid
25 ------ ------ ------ ------ 152 ------ 265 ------ 378 435 ------ ------

FTO: Flow to open (liquid and gas) FTC: Flow to close

➀ When substituting the 316 St. St. shaft for the standard 17-4 PH St. St. shaft refer to the 316 St. St. construction
allowable pressure drop tables due to the lower shaft allowable torque values.

Metal Seat - Stainless Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator ➀
Flow to Flow to Flow to Open - Air to Close
Valve Preload Close Open Flow to Close - Air to Open
Act. Flow
Size Cv Press. - -
Type Direction
(in.) (psig) Air to Air to Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
Close* Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
500 Dia. ------ FTO ------ 90 50 130 200 300 ------ ------ ------ ------ ------ ------
FTC 140 ------ 50 130 200 300 ------ ------ ------ ------ ------ ------
FTO ------ 131 70 180 300 400 ------ ------ ------ ------ ------ ------
6 300 Dia. ------
FTC 220 ------ 70 180 300 400 ------ ------ ------ ------ ------ ------
200 Dia. ------ FTO ------ 200 110 280 450 600 ------ ------ ------ ------ ------ ------
FTC 310 ------ 110 280 450 600 ------ ------ ------ ------ ------ ------
FTO ------ 45 25 60 100 140 180 220 ------ ------ ------ ------
Dia. ------ FTC Gas 70 ------ 25 60 100 140 180 ------ ------ ------ ------ ------
850
FTC Liq. 70 ------ 25 60 90 90 90 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 220 ------ ------ ------ ------ ------ ------ ------ ------ ------
FTO ------ 70 40 100 160 220 280 300 ------ ------ ------ ------
Dia. ------ FTC Gas 110 ------ 40 100 160 220 280 ------ ------ ------ ------ ------
8 510
FTC Liq. 110 ------ 40 100 140 140 140 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 300 ------ ------ ------ ------ ------ ------ ------ ------ ------
FTO ------ 110 60 160 250 350 450 500 ------ ------ ------ ------
Dia. ------ FTC Gas 180 ------- 60 160 250 350 450 ------ ------ ------ ------ ------
340
FTC Liq. 180 ------ 60 160 220 220 220 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 500 ------ ------ ------ ------ ------ ------ ------ ------ ------
FTO: Flow to open (liquid and gas) FTC: Flow to close
➀ When substituting the 17-4 PH St. St. shaft for the standard 316 St. St. shaft refer to the carbon steel construction
allowable pressure drop tables.

12
 SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Metal Seat - Stainless Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator➀

Flow to Flow to Flow to Open - Air to Close

Valve Preload Close Open Flow to Close - Air to Open
Cv Act. Flow
Size Press. - -
Type Direction Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
(in.) (psig) Air to Air to
Close* Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO ------ 25 15 35 55 80 100 120 140 160 ------ ------
Dia. ------ FTC Gas 40 ------ 15 35 55 80 100 ------ ------ ------ ------ ------
1300
FTC Liq. 40 ------ 15 35 50 50 50 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 110 150 160 ------ ------ ------ ------ ------ ------ ------
FTO ------ 40 20 50 80 120 150 180 220 250 ------ ------
Dia. ------ FTC Gas 60 ------ 20 50 80 120 150 ------ ------ ------ ------ ------
10 780
FTC Liq. 60 ------ 20 50 70 70 70 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 170 230 250 ------ ------ ------ ------ ------ ------ ------
FTO ------ 60 35 90 140 190 240 300 350 400 ------ ------
Dia. ------ FTC Gas 100 ------ 35 90 140 190 240 ------ ------ ------ ------ ------
520
FTC Liq. 100 ------ 35 90 120 120 120 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ ------ 270 380 400 ------ ------ ------ ------ ------ ------ ------
FTO ------ 15 ------ 20 30 45 55 70 80 90 100 120
Dia. ------ FTC Gas 20 ------ ------ 20 30 45 55 60 ------ ------ ------ ------
1750 FTC Liq. 20 ------ ------ 20 30 30 30 30 ------ ------ ------ ------
Cyl. 15 ------ ------ 60 90 110 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ ------ 110 130 140 ------ ------ ------ ------
FTO ------ 20 10 30 50 70 90 100 120 140 160 180
Dia. ------ FTC Gas 35 ------ 10 30 50 70 90 ------ ------ ------ ------ ------
12 1050 FTC Liq. 35 ------ 10 30 45 45 45 ------ ------ ------ ------ ------
Cyl. 15 FTO & FTC
------ ------ 100 130 170 ------ ------ ------- ------ ------ ------ ------
20 ------ ------ ------ ------ ------ 170 200 220 ------ ------ ------ ------
FTO ------ 35 20 50 80 110 140 180 210 240 270 300
Dia. ------ FTC Gas 60 ------ 20 50 80 110 140 ------ ------ ------ ------ ------
700 FTC Liq. 60 ------ 20 50 70 70 70 ------ ------ ------ ------ ------
Cyl. 15 ------ ------ 160 220 280 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ ------ 280 340 360 ------ ------ ------ ------
FTO ------ 7 ------ 10 18 25 31 38 44 51 58 65
Dia. ------ FTC Gas ------ ------ ------ 10 18 25 31 ------ ------ ------ ------ ------
FTC Liq. ------ ------ ------ 10 15 ------ ------ ------ ------ ------ ------ ------
2350
15 ------ 37 37 57 67 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 57 ------ ------ ------ ------ 85 98 ------ ------ ------ ------
25 ------ 67 ------ ------ ------ ------ ------ ------ ------ 115 126 144
FTO ------ 11 5 17 28 37 47 56 67 77 87 98
Dia. ------ FTC Gas ------ ------ 5 17 28 37 47 ------ ------ ------ ------ ------
14 FTC Liq. ------ ------ 5 17 28 ------ ------ ------ ------ ------ ------ ------
1410
15 ------ 57 56 85 100 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 85 ------ ------ ------ ------ 126 146 ------ ------ ------ ------
25 ------ 100 ------ ------ ------ ------ ------ ------ ------ 172 187 214
FTO ------ 18 10 28 45 62 79 98 112 146 163 ------
Dia. ------ FTC Gas ------ ------ 10 28 45 62 79 ------ ------ ------ ------ ------
FTC Liq. ------ ------ 10 28 45 ------ ------ ------ ------ ------ ------ ------
940
15 ------ 94 94 140 169 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 140 ------ ------ ------ ------ 211 243 ------ ------ ------ ------
25 ------ 169 ------ ------ ------ ------ ------ ------ ------ 287 315 353
15 FTO/FTC ------ ------ 68 ------ 104 ------ ----- ------ ------ ------ ------ ------
3650 Cyl. 20 Gas & ------ ------ 38 ------ 83 ------ ------ ------ ------ ------ ------ ------
Liquid
25 ------ ------ ------ ------ 68 ------ 104 ------ ------ ------ ------ ------
15 FTO/FTC ------ ------ 100 ------ 174 ------ ------ ------ ------ ------ ------ ------
16 2190 Cyl. 20 Gas & ------ ------ 64 ------ 139 ------ ------ ------ ------ ------ ------ ------
Liquid
25 ------ ------ ------ ------ 100 ------ 174 ------ ------ ------ ------ ------
15 FTO/FTC ------ ------ 152 ------ 265 ------ ------ ------ ------ ------ ------ ------
1460 Cyl. 20 Gas & ------ ------ 96 ------ 209 ------ ------ ------ ------ ------ ------ ------
Liquid
25 ------ ------ ------ ------ 152 ------ 265 ------ ------ ------ ------ ------
FTO: Flow to open (liquid and gas) FTC: Flow to close
➀ When substituting the 17-4 PH St. St. shaft for the standard 316 St. St. shaft refer to the carbon steel construction
allowable pressure drop tables.

13
SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Soft Seat - Carbon Steel and Stainless Steel Construction (7-15 Spring) Diaphragm Actuator
Flow to Open - Air to Close
Flow to Close - Air to Open
Valve
Size Cv Flow to Open Supply Supply Supply Supply Supply Supply
(in.) Air to Open 20 psig 25 psig 30 psig 35 psig 40 psig 45 psig

14 800 800 ------ ------ ------ ------ ------

1 8.4 1000 1000 ------ ------ ------ ------ ------
5.6 1000 1000 ------ ------ ------ ------ ------
30 500 230 700 ------ ------ ------ ------
11/2 18 1000 320 1000 ------ ------ ------ ------
12 1000 520 1000 ------ ------ ------ ------
50 250 95 370 600 ------ ------ ------
2 30 530 140 530 940 ------ ------ ------
20 520 230 750 1000 ------ ------ ------
135 200 90 300 500 ------ ------ ------
3 81 420 130 420 740 ------ ------ ------
54 480 230 680 800 ------ ------ ------
230 100 35 150 260 370 480 500
4 138 210 50 210 380 540 710 800
92 230 100 330 570 800 800 800

14
 SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Soft Seat - Carbon Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator➀
Flow to Flow to Open - Air to Close
Valve Preload Open Flow to Close - Air to Open
Act. Flow
Size Press. -
Type Direction
(in.) (psig) Air to Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
Cv Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO 60 20 90 170 240 310 380 450 500 ------ ------
Dia. ------ FTC Gas ------ 20 90 170 240 310 380 450 500 ------ ------
500
FTC Liq. ------ 20 90 170 240 300 300 300 300 ------ ------
Cyl. 15 FTO & FTC ------ 350 500 ------ ----- ------ ------ ------ ------ ------ ------
FTO 130 30 130 240 350 450 530 620 730 ------ ------
Dia. ------ FTC Gas ------ 30 130 240 350 450 530 620 720 ------ ------
6 300
FTC Liq. ------ 30 130 240 350 360 360 360 360 ------ ------
Cyl. 15 FTO & FTC ------ 500 800 ------ ------ ------ ------ ------ ------ ------ ------
FTO 150 60 220 380 530 680 800 ------ ------ ------ ------
Dia. ------ FTC Gas ------ 60 220 380 530 680 800 ------ ------ ------ ------
200
FTC Liq. ------ 60 220 380 500 500 500 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 750 800 ------ ------ ------ ------ ------ ------ ------ ------
FTO 20 ------ 40 75 110 150 180 220 250 300 ------
Dia. ------ FTC Gas ------ ------ 40 75 110 150 180 ------ ------ ------ ------
850
FTC Liq. ------ ------ 40 75 90 90 90 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 160 240 300 ------ ------ ------ ------ ------ ------ ------
FTO 40 10 65 120 170 230 280 340 400 450 ------
Dia. ------ FTC Gas ------ 10 65 120 170 230 280 ------ ------ ------ ------
8 510
FTC Liq. ------ 10 65 120 140 140 140 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 250 380 450 ------ ------ ------ ------ ------ ------ ------
FTO 70 20 110 200 280 370 450 540 620 700 ------
Dia. ------ FTC Gas ------- 20 110 200 280 370 450 ------ ------ ------ ------
340
FTC Liq. ------ 20 110 200 220 220 220 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 400 600 700 ------ ------ ------ ------ ------ ------ ------
FTO ------ ------ 15 35 55 75 95 110 130 150 170
Dia. ------ FTC Gas ------ ------ 15 35 55 75 95 100 ------ ------ ------
1300 FTC Liq. ------ ------ 15 35 50 50 50 50 ------ ------ ------
15 ------ 80 120 160 ------ ------ ------ ------ ------ ------ ------
Cyl. FTO & FTC
20 ------ ------ ------ ------ 160 200 250 ------ ------ ------ ------
FTO 15 ------ 30 60 90 120 150 180 210 240 270
Dia. ------ FTC Gas ------ ------ 30 60 90 120 150 ------ ------ ------ ------
10 780 FTC Liq. ------ ------ 30 60 70 70 70 ------ ------ ------ ------
15 ------ 130 190 250 ------ ------ ------ ------ ------ ------ ------
Cyl. FTO & FTC
20 ------ ------ ------ ------ 250 300 300 ------ ------ ------ ------
FTO 30 ------ 50 100 150 190 240 280 330 380 430
Dia. ------ FTC Gas ------ ------ 50 100 150 190 240 ------ ------ ------ ------
520 FTC Liq. ------ ------ 50 100 120 120 120 ------ ------ ------ ------
15 ------ 210 310 400 ------ ------ ------ ------ ------ ------ ------
Cyl. FTO & FTC
20 ------ ----- ------ ------ 400 450 450 ------ ------ ------ ------
FTO ------ ------ 5 15 25 40 50 60 70 85 95
Dia. ------ FTC Gas ------ ------ 5 15 25 40 50 60 ------ ------ ------
FTC Liq. ------ ------ 5 15 25 30 30 30 ------ ------ ------
1750
15 ------ 45 70 90 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ 90 110 130 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ 130 160 200 ------
FTO ------ ------ 10 30 45 65 80 100 110 130 150
Dia. ------ FTC Gas ------ ------ 10 30 45 65 80 90 ------ ------ ------
FTC Liq. ------ ------ 10 30 45 45 45 45 ------ ------ ------
12 1050
15 ------ 70 110 140 ------ ------ ------- ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ 140 170 200 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ 200 230 250 ------
FTO 10 ------ 25 50 80 110 130 160 190 220 250
Dia. ------ FTC Gas ------ ------ 25 50 80 110 130 140 ------ ------ ------
FTC Liq. ------ ------ 25 50 70 70 70 70 ------ ------ ------
700
15 ------ 120 180 230 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ ------ ------ ------ 230 280 300 ------ ------ ------ ------
25 ------ ------ ------ ------ ------ ------ ------ 300 300 300 ------

FTO: Flow to open (liquid and gas) FTC: Flow to close

➀ When substituting the 316 St. St. shaft for the standard 17-4 PH St. St. shaft refer to the 316 St. St. construction
allowable pressure drop tables due to the lower shaft allowable torque values.

15
SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Soft Seat - Stainless Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator ①
Flow to Flow to Open - Air to Close
Valve Preload Open Flow to Close - Air to Open
Act. Flow
Size Cv Press. -
Type Direction
(in.) (psig) Air to Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO 60 20 90 170 240 ------ ------ ------ ------ ------ ------
500 Dia. ------ FTC Gas ------ 20 90 170 240 ------ ------ ------ ------ ------ ------
FTC Liq. ------ 20 90 170 240 ------ ------ ------ ------ ------ ------
FTO 130 30 130 240 350 ------ ------ ------ ------ ------ ------
6 300 Dia. ------ FTC Gas ------ 30 130 240 350 ------ ------ ------ ------ ------ ------
FTC Liq. ------ 30 130 240 350 ------ ------ ------ ------ ------ ------
FTO 150 60 220 380 530 ------ ------ ------ ------ ------ ------
200 Dia. ------ FTC Gas ------ 60 220 380 530 ------ ------ ------ ------ ------ ------
FTC Liq. ------ 60 220 380 500 ------ ------ ------ ------ ------ ------
FTO 20 ------ 40 75 110 150 180 ------ ------ ------ ------
Dia. ------ FTC Gas ------ ------ 40 75 110 150 180 ------ ------ ------ ------
850
FTC Liq. ------ ------ 40 75 90 90 90 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 160 180 ------ ------ ------ ------ ------ ------ ------ ------
FTO 40 10 65 120 170 230 280 ------ ------ ------ ------
Dia. ------ FTC Gas ------ 10 65 120 170 230 280 ------ ------ ------ ------
8 510
FTC Liq. ------ 10 65 120 140 140 140 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 250 280 ------ ------ ------ ------ ------ ------ ------ ------
FTO 70 20 110 200 280 370 450 ------ ------ ------ ------
Dia. ------ FTC Gas ------- 20 110 200 280 370 450 ------ ------ ------ ------
340
FTC Liq. ------ 20 110 200 220 220 220 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 400 450 ------ ------ ------ ------ ------ ------ ------ ------
FTO ------ ------ 15 35 55 75 95 110 130 ------ ------
Dia. ------ FTC Gas ------ ------ 15 35 55 75 95 100 ------ ------ ------
1300
FTC Liq. ------ ------ 15 35 50 50 50 50 ------ ------ ------
Cyl. 15 FTO & FTC ------ 80 120 130 ------ ------ ------ ------ ------ ------ ------
FTO 15 ------ 30 60 90 120 150 180 210 ------ ------
Dia. ------ FTC Gas ------ ------ 30 60 90 120 150 ------ ------ ------ ------
10 780
FTC Liq. ------ ------ 30 60 70 70 70 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 130 190 210 ------ ------ ------ ------ ------ ------ ------
FTO 30 ------ 50 100 150 190 240 280 330 ------ ------
Dia. ------ FTC Gas ------ ------ 50 100 150 190 240 ------ ------ ------ ------
520
FTC Liq. ------ ------ 50 100 120 120 120 ------ ------ ------ ------
Cyl. 15 FTO & FTC ------ 210 310 330 ------ ------ ------ ------ ------ ------ ------
FTO ------ ------ 5 15 25 40 50 60 70 85 95
Dia. ------ FTC Gas ------ ------ 5 15 25 40 50 60 ------ ------ ------
1750 FTC Liq. ------ ------ 5 15 25 30 30 30 ------ ------ ------
Cyl. 15 ------ 45 70 90 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ 90 110 130 ------ ------ ------ ------
FTO ------ ------ 10 30 45 65 80 100 110 130 150
Dia. ------ FTC Gas ------ ------ 10 30 45 65 80 90 ------ ------ ------
12 1050 FTC Liq. ------ ------ 10 30 45 45 45 45 ------ ------ ------
Cyl. 15 ------ 70 110 140 ------ ------ ------- ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ 140 170 200 ------ ------ ------ ------
FTO 10 ------ 25 50 80 110 130 160 190 220 250
Dia. ------ FTC Gas ------ ------ 25 50 80 110 130 140 ------ ------ ------
700 FTC Liq. ------ ------ 25 50 70 70 70 70 ------ ------ ------
Cyl. 15 ------ 120 180 230 ------ ------ ------ ------ ------ ------ ------
FTO & FTC
20 ------ ------ ------ ------ 230 280 300 ------ ------ ------ ------

FTO: Flow to open (liquid and gas) FTC: Flow to close

① When substituting the17-4 PH St. St. shaft for the standard 316 St. St. shaft refer to the carbon steel construction
allowable pressure drop tables.

16
 SD CF5000 9/92
35002 Series

Allowable Pressure Drops (psi)

Soft Seat - Carbon Steel and Stainless Steel Construction (7-24 Spring) Diaphragm and/or Cylinder Actuator
Flow to Flow to Flow to Open - Air to Close
Valve Preload Close Open Flow to Close - Air to Open
Act. Flow
Size Cv Press. - -
Type Direction
(in.) (psig) Air to Air to Supply Supply Supply Supply Supply Supply Supply Supply Supply Supply
Close* Open 30 psig 35 psig 40 psig 45 psig 50 psig 55 psig 60 psig 65 psig 70 psig 75 psig
FTO ------ ------ ------ ------ 7 12 18 24 31 35 † 42 † 48 †
Dia. ------ FTC Gas ------ ------ ------ ------ 7 12 18 24 31 ------ ------ ------
FTC Liq. ------ ------ ------ ------ 7 12 15 ------ ------ ------ ------ ------
2350
15 ------ 24 24 41 51 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 41 ------ ------ ------ ------ 65 78 ------ ------ ------ ------
25 ------ 51 ------ ------ ------ ------ ------ ------ ------ 92 102 125
FTO ------ ------ ------ ------ 12 22 31 40 48 56 † 65 † 74 †
Dia. ------ FTC Gas ------- ------ ------ ------ 12 22 31 40 48 ------ ------ ------
FTC Liq. ------ ------ ------ ------ 12 22 ------ ------ ------ ------ ------ ------
14 1410
15 ------ 38 38 64 78 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 64 ------ ------ ------ ------ 100 118 ------ ------ ------ ------
25 ------ 78 ------ ------ ------ ------ ------ ------ ------ 140 † 155 † 179 †
FTO ------ ------ ------ 11 27 41 55 69 85 99 † 115 † 129 †
Dia. ------ FTC Gas ------ ------ ------ 11 27 41 55 69 79 ------ ------ ------
940 FTC Liq. ------ ------ ------ 11 27 41 45 ------ ------ ------ ------ ------
15 ------ 69 69 100 135 ------ ------ ------ ------ ------ ------ ------
Cyl. 20 FTO & FTC ------ 110 ------ ------ ------ ------ 173 200 ------ ------ ------ ------
25 ------ 135 ------ ------ ------ ------ ------ ------ ------ 240 † 264 † 300 †

FTO: Flow to open (liquid and gas) FTC: Flow to close

† Carbon Steel only.

17
SD CF5000 9/92
35002 Series

Dimensions and Weights

Flangeless and Flanged with Spring Diaphragm Actuator

D [MAX] C [MAX]
L

B F
[MAX] SQUARE

1/4 NPT
OF PIPELINE
E
G [MAX] DIA

H "M" CLEARANCE FOR BOLT REMOVAL

(FROM EITHER BODY FACE) ➀
K J A

All Dimensions in Inches

A H M Valve Weight *
Valve (lbs)
Size Flanged B C D E F G Flanged J K L ANSI ANSI ANSI ANSI
Threaded & Threaded &
(in.) Class Class Class Class Flange- Flanged
Ends Flange- Ends Flange- l ess
less less 150 300 400 600

1 4.00 4.00 6.8 11.7 8.2 6.4 5.5 4.5 2.64 2.64 + 8.1 1.5 5.4 6.5 9.0 9.0 9.0 26 42
11/2 5.38 4.50 6.9 11.8 8.3 6.4 5.5 4.6 3.30 2.44 + 9.2 2.0 6.5 6.5 10.0 10.0 10.0 31 48
2 5.75 4.88 6.9 11.8 8.3 6.4 5.5 4.6 3.30 2.44 + 9.4 2.6 6.7 10.5 10.5 10.5 10.5 35 50
3 --- 6.50 10.3 17.1 9.0 6.4 6.9 4.8 ------ 3.81 + 13.1 3.3 9.6 11.8 13.5 14.0 14.0 78 110
4 --- 7.62 10.4 17.2 9.0 6.4 6.9 4.8 ------ 4.19 + 14.0 4.3 10.5 13.0 14.0 16.0 16.5 105 140
6 --- 9.00 13.0 21.0 11.9 10.0 8.6 8.4 ------ 5.00 17.0 5.8 12.7 15.5 16.0 18.5 18.5 190 290
8 --- 9.56 13.1 21.1 12.0 10.0 8.6 8.5 ------ 5.81 18.5 8.0 14.2 15.5 18.5 19.5 21.0 281 450
10 --- 11.69 13.2 21.2 12.2 10.0 8.6 8.7 ------ 6.58 22.6 9.9 18.3 19.8 20.5 22.5 24.5 345 550
12 --- 13.31 13.3 21.3 12.3 10.0 8.6 8.8 ------ 7.25 24.0 10.9 19.7 20.0 22.5 24.8 25.5 405 675
14
--- 18.70 13.5 21.3 12.3 10.0 8.6 8.9 ------ 10.1 29.2 11.5 24.8 ➀ ➀ ➀ ➀ ------ 1226
(150)
14
--- 20.20 13.5 21.3 12.3 10.0 8.6 8.9 ------ 10.9 29.2 11.5 24.8 ➀ ➀ ➀ ➀ ------ 1226
(300)

➀ 14" Camflex II available in flanged construction only. “M’ dimension does not apply.
* Shipping weights are approximately 10% higher.
+ Note for Flanged Camflex
1" valve, H dimension is 2.0"
11/2" valve, H dimension is 2.32"
3" valve, H dimension is 3.38"
4" valve, H dimension is 4.17"

18
 SD CF5000 9/92
35002 Series

Dimensions and Weights

Flangeless and Flanged with Double Acting Cylinder Actuator

1/4 NPT
C [MAX]

1/4 8.6
NPT
8.6

D [MAX]
L

1/4 NPT
F B
SQUARE [MAX]

OF PIPELINE
E G
DIA [MAX]

H
"M" CLEARANCE FOR BOLT REMOVAL A J K
(FROM EITHER BODY FACE) ➀

All Dimensions in Inches

A H M Valve Weight *
Valve (lbs)
Size B C D E F G J K L ANSI ANSI ANSI ANSI
Flanged & Flanged & Flange-
(in.) Class Class Class Class Flanged
Flangeless Flangeless less
150 300 400 600

6 9.00 13.0 26.7 11.9 10.0 10.60 8.4 5.00 17.0 5.8 11.7 15.5 16.0 18.5 18.5 428 525
8 9.56 13.1 26.8 12.0 10.0 10.60 8.5 5.81 18.5 8.0 13.2 15.5 18.5 19.5 21.0 520 685
10 11.69 13.2 26.9 12.2 10.0 10.60 8.7 6.58 22.6 9.9 17.3 19.8 20.5 22.5 24.5 580 785
12 13.31 13.3 27.0 12.3 10.0 10.60 8.8 7.25 24.0 10.9 18.7 20.0 22.5 24.8 25.5 640 910
14
18.7 14.4 26.5 12.3 10.0 10.60 8.9 10.10 29.2 11.5 23.8 ① ------ ------ ------ ------ 1279
(150)
14
20.2 14.4 26.5 12.3 10.0 10.60 8.9 10.90 29.2 11.5 23.8 ------ ------ ------ ------ ------ 1279
(300)

16 21.0 18.8 33.7 8.5 ------ 12.75 6.5 10.70 31.0 12.5 24.7 ① ① ------ ------ ------ 1600

① 14" & 16" Camflex II available in flanged construction only. "M" dimension does not apply.
* Shipping weights are approximately 10% higher.

19
SD CF5000 9/92
35002 Series

Accessories and Options

Handwheel 496 Rotary Switches

496-2 (2 switches) Limit Switch
(See Specification Data CS7000)
4602A Series Positioner (See Specification Data CS2002)
Instrument Signals
3-15, 3-27 and 6-30 psig
80-4 or 80-40 Airset
3-9 and 9-15 psi split range
(See Specification Data CY7800)
77-6 or 77-60 Lockup Valve
8012-2-C Electropneumatic Valve Positioner (See Specification Data CY7700)
(See Specification Data CS5000) 2" Gauge 0-30 psi
Instrument Signals 10-50 mA, 104 ohms
4-20 mA, 173 ohms
4-12, 12-20 mA, 173 ohms For Solenoid Valves Consult Factory

8005A/8006A Electropneumatic Transducer

Additional Options Available
(See Specification Data CS6000)
Input Signals 10-50 mA, 104 ohms Other Body Materials (NACE)
4-20 mA, 173 ohms Adjustable Limit Stops
Output Signals (Direct or Reverse)
Model 8005A: 3-15 psi Refer to specific actuator and accessory specification
Model 8006A: 3-15, 6-30, 0-20, or 0-35 psi literature for complete information.

I/PEX 9000 Electropneumatic Transducer

(See Specification Data CS9000)
Input Range 4-20 mA or 10-50 mA
Split range up to 3 times
Output (Direct or Reverse)
3-15 psi, adjustable to 0-20 psi

20