Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Induflex Ms 5253: MS Hybrid Polymer Sealant

    Uploaded by

    Khizar Hayat
    This document provides information on INDUFLEX MS 5253, a flexible, high strength sealant and adhesive suitable for a wide range of applications both indoors and outdoors. It can seal or bond many common building materials like glass, metal, concrete, wood, vinyl and some plastics. The sealant has excellent adhesion, is paintable, resistant to water and UV light, and remains flexible after curing. It is available in 600ml sausages in black, clear and white colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Induflex Ms 5253: MS Hybrid Polymer Sealant

    Uploaded by

    Khizar Hayat
    31 views2 pages
    This document provides information on INDUFLEX MS 5253, a flexible, high strength sealant and adhesive suitable for a wide range of applications both indoors and outdoors. It can seal or bond many common building materials like glass, metal, concrete, wood, vinyl and some plastics. The sealant has excellent adhesion, is paintable, resistant to water and UV light, and remains flexible after curing. It is available in 600ml sausages in black, clear and white colors.

    Original Title

    INDUFLEX-MS-5253

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on INDUFLEX MS 5253, a flexible, high strength sealant and adhesive suitable for a wide range of applications both indoors and outdoors. It can seal or bond many common building materials like glass, metal, concrete, wood, vinyl and some plastics. The sealant has excellent adhesion, is paintable, resistant to water and UV light, and remains flexible after curing. It is available in 600ml sausages in black, clear and white colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    Induflex Ms 5253: MS Hybrid Polymer Sealant

    Uploaded by

    Khizar Hayat
    This document provides information on INDUFLEX MS 5253, a flexible, high strength sealant and adhesive suitable for a wide range of applications both indoors and outdoors. It can seal or bond many common building materials like glass, metal, concrete, wood, vinyl and some plastics. The sealant has excellent adhesion, is paintable, resistant to water and UV light, and remains flexible after curing. It is available in 600ml sausages in black, clear and white colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Aquafin Pakistan (Pvt) Ltd

    Steel House, West Wharf Road,


    Karachi - 74000 Pakistan
    Phone: +92-21-32313113 , 92-21-3231160
    Email: marketing@aquafinpakistan.com
    Website: www.aquafinpakistan.com Technical Data Sheet

    INDUFLEX MS 5253
    MS Hybrid polymer sealant

    Description: Areas of application:


    INDUFLEX MS 5253 is a flexible, high strength sealant • Wall panels
    and adhesive that is suitable for wide range of • Glass (not recommended for PE, PP and Teflon
    applications including as joint sealant. INDUFLEX MS (PTFE))
    5253 can be painted over with most acrylic and alkyd • Stone and concrete
    paints and is hazard free. The product can be used • Many metals
    indoors or outdoors for sealing and/or bonding any • Skirting boards
    materials. • Windows sills
    • Thresholds
    Properties: • Insulations
    • Excellent adhesion to most common building
    materials like glass, aluminum, concrete, wood,
    vinyl, powder coated surfaces and many type of Surface Preparation:
    plastic. Ensure that the surface to be sealed is clean, dry,
    • Paintable with water based paints. sound and grease free. Metals should be cleaned with
    • INDUFLEX MS 5253 has good adhesion even a non-oily solvent soaked clean cloth. Solvent should
    under water. be wiped from the surface with a clean dry cloth. Use
    • Movement capability + 35% an alcohol such as methylated spirits on glass. When
    • Will not corrode metals used on remedial work all existing sealant must be
    • Superior UV resistance compared to Polyurethane removed. Porous substrates such as concrete,
    brickwork, mortar etc. must be mechanically cleaned of
    loose particles using a steel brush, sanding disc or any
    Typical Properties:
    similar means.
    Specification Specification
    Test Method Properties Unit Coloured clear
    ASTM C 679 Skin Over Time min 15 10 Application Preparation:
    ASTM C 679 Tack Free Time min 25 20
    ASTM D 1475 Specific Gravity g/cm³ 1.40 1.05
    Cut nozzle at a sharp angle slightly wider than the
    ASTM D 2240
    Hardness
    points 55 50
    desired bead. Extrude sealant with a gun and tool with
    (Shore A)
    ASTM C 639-5 Depth Cure mm/24 hrs 3 3 a round spatula within 10 minutes to spread the
    Loss of weight
    ASTM C 1184-05 (Shrinkage) % 3 3
    sealant.
    ASTM C 639-5 Flow mm 2 2
    ASTM 679 Tooling Time min 30 25 Storage and Shelf life:
    ASTM C 603 Extrusion Rate g/min 250 280
    M50 0.47 0.47
    When stored in original unopened container below
    ASTM D 412
    Tensile Properties M100 0.77 0.77 25ºC INDUFLEX MS 5253 has a shelf life of 18
    MPa
    after 7 days Tb 3.19 3.19 months from date of manufacturing. Storage outside
    curing Eb % 745 745
    these parameters may dramatically reduce its shelf life.
    Elongation
    ASTM D 412
    approx
    % 500 500 Containers should always be kept sealed when not in
    ASTM D 412 Young’s Modulus MPa 0.77 0.75
    ISO-34-1 Method
    use. After a container has been opened and the entire
    B Tear Strength kN/m 21 21 contents have not been used, extrude 3/8’’ of material
    Application
    ASTM C 679
    Temp
    ºC 5 upto 40 5 upto 40 pass nozzle opening. When ready to use, pull out
    ASTM C 679 In service Temp ºC -40 upto 90 -40 upto 90 cured plug. Sealant is ready to use.
    ASTM C 1184-05 Shelf Life Month 18 18

    *Curing time (Skin over time & Tack Free Time) may
    vary depends on climatic condition during application.

    1
    Packaging:
    INDUFLEX MS 5253 is available in 600 ml sausages.
    IINDUFLEX MS 5253 is available in Black, Clear and
    White color.
    Limitations:
    • No Shipping limitations
    • Not for PE, PP, Teflon, Neoprene and bituminous
    surfaces.

    Health and Safety:


    • Direct contact of uncured sealant irritates the eyes
    and may irritate the skin.
    • In case of contact with the eye, flush eyes with clean
    water for 15 minutes and seek immediate medical
    treatment. Do not handle contact lenses with sealant
    on hands.
    • In case of skin contact, remove from skin and wash
    with water
    • Do not inhale, use only in well ventilated areas. Over
    exposure to vapor may irritate eyes, nose and throat.
    • Keep out of reach of children.
    • Wear suitable protective gloves and eye/face
    protection.
    Please observe a valid Material Safety Data Sheet
    (MSDS).
    Important Advice:
    The information and data contained herein is believed to
    be accurate and reliable; however, it is the user’s
    responsibility to determine suitability of use. Since the
    supplier cannot know all the uses, or the conditions of use
    to which these products may be exposed, no warranties
    concerning the fitness or suitability for a particular use or
    purpose are made.
    *Information on this data sheet is subject to change
    without notice and should not be used for writing
    specifications.

    Issued date: November 2015

    You might also like