DEPARTMENT OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

P3NE
Revision 17
McCauley
4HFR34C(6--)
4HFR34C(7--)
4JFR34C(7--)
4JFR36C(7--)
May 13, 2022
TYPE CERTIFICATE DATA SHEET NO. P3NE

Propellers of models described herein conforming with this data sheet, which is part of Type Certificate No. P3NE
and other approved data on file with the Federal Aviation Administration, meet the minimum standards for use in
certificated aircraft in accordance with the pertinent aircraft data sheets and applicable portions of the Federal
Aviation Regulations provided they are installed, operated, and maintained as prescribed by the approved
manufacturer's manuals and other approved instructions.

Type Certificate Holder: McCauley Propeller Systems

One Cessna Boulevard
PO Box 7704
Wichita, KS 67277

Type Constant speed, full feathering and reversing; hydraulic (see Note 4)
Engine Shaft Special flange (see Note 1)
Hub Material Aluminum Alloy
Blade Material Aluminum Alloy
No. of Blades Four
Hubs Eligible 4HFR34C652, 4HFR34C653, 4HFR34C660, 4HFR34C661, 4HFR34C662,
4HFR34C663, 4HFR34C664, 4HFR34C665, 4HFR34C668, 4HFR34C752,
4HFR34C754, 4HFR34C755, 4HFR34C756, 4JFR34C758, 4HFR34C760,
4HFR34C761, 4HFR34C762, 4HFR34C763, 4HFR34C764, 4HFR34C766,
4HFR34C768, 4HFR34C769, 4HFR34C771, 4JFR36C772, 4HFR34C773,
4HFR34C774, 4HFR34C775, 4HFR34C778, 4HFR34C779

Maximum Diameter Approx. Max.

Continuous Take-Off Limits Wt. Complete
Blade HP RPM HP RPM (See Note 2) (For Ref. Only)

Hub Model 4HFR34C652

L106L[X]-0 1250 1591 1250 1591 106" - 100" 168 Lbs.
to -6

Hub Model 4HFR34C653

L106F[X]-0 1250 1591 1250 1591 106" - 100" 168 Lbs.
to -6

Hub Model 4HFR34C660

L90G[X]-0 635.5 1591 635.5 1591 90" - 84" 141 Lbs.
to -6

Page No. 1 2 3 4 5 6 7 8 9
Rev. No. 17 17 16 17 16 14 16 17 17
P3NE Page 2 of 9 Rev. 17

Maximum Diameter Approx. Max.

Continuous Take-Off Limits Wt. Complete
Blade HP RPM HP RPM (See Note 2) (For Ref. Only.)

Hub Model 4HFR34C661

90LN[X]-0 715 2000 750 2000 90" - 84" 135 Lbs.
to -6
Hub Model 4HFR34C662
L108F[X]-0 900 1591 925 1591 108" - 102" 170 Lbs.
to –6

Hub Model 4HFR34C663

L106K[X]-0 1250 1591 1250 1591 106" - 100" 168 Lbs.
to –6

Hub Model 4HFR34C664

L106L[X]-0 1000 1591 1000 1591 106” – 100” 168 Lbs.
to –6

Hub Model 4HFR34C665

L106FR[X]-0 1000 1591 1000 1591 106” – 100” 168 Lbs.
to –6

Hub Model 4HFR34C668

110GS[X]-0 900 1591 900 1591 110” – 106” 202 Lbs.
to –4

Hub Model 4HFR34C752

106L[X]-0 1300 1700 1300 1700 106" - 100" 156 Lbs.
to –6

Hub Model 4HFR34C754 and 4HFR34C755

94L[X]-0 850 2000 850 2000 94" - 88" 146 Lbs.
to –6

Hub Model 4HFR34C756

106LM[X]-0 1000 1700 1000 1700 106" - 100" 156 Lbs.
to –6

Hub Model 4JFR34C758

106LN[X]+2 1550 1700 1550 1700 108" - 100" 165 Lbs.
to –6

Hub Model 4HFR34C760

95D[X]-0 900 2000 900 2000 95" - 87" 146 Lbs.
to –8

Hub Model 4HFR34C761

L95D[X]-0 900 2000 900 2000 95" - 87" 146 Lbs.
to –8

Hub Model 4HFR34C762

94LM[X]-4 700 2200 700 2200 90" - 84" 133 Lbs.
to –10
Rev. 17 Page 3 of 9 P3NE

Maximum Diameter Approx. Max.

Continuous Take-Off Limits Wt. Complete
Blade HP RPM HP RPM (See Note 2) (For Ref. Only.)

Hub Model 4HFR34C763

94LM[X]-4 550 2200 550 2200 90" - 84" 133 Lbs.
to –10

Hub Model 4HFR34C764 and 4HFR34C768

94LM[X]-0 700 2200 700 2200 94" - 84" 135 Lbs.
to –10

Hub Model 4HFR34C766

94LN[X]-2 700 2200 700 2200 92" - 84" 135 Lbs.
to –10

Hub Model 4HFR34C769 and 4HFR34C773

94LM[X]-0 715 2200 715 2200 94" - 84" 135 Lbs.
to –10

Hub Model 4HFR34C771

94L[X]-0 850 2080 850 2080 94” – 88” 146 Lbs.
to –6

Hub Model 4HFR34C775

96MG[X]-0 750 2200 750 2200 96” – 88” 140 Lbs.
to –8

Hub Model 4JFR36C772

112GC[X]-2 1500 1700 1500 1700 110”- 100” 185 Lbs.
to –12

Hub Model 4HFR34C774

94LP[X]-0 850 2000 850 2000 94”- 88” 135 Lbs.
to -6

Hub Model 4HFR34C778

102BH[X]-0 867 2000 867 2000 102”- 98” 142 Lbs.
to -4

Hub Model 4HFR34C779

110FD[X]-0 1110 1700 1110 1700 110”- 106” 180 Lbs.
to -4
 P3NE Page 4 of 9 Rev. 17

Certification Basis:

Propeller Certification Basis Method of Approval Application Date Approval Date

14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21-
4HFR34C652 December 3, 1981 August 16, 1983
35-5 (October 14, 1980) 55 (October 08, 1981)

4HFR34C653 14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21- August 11, 1989 September 21, 1989
35-5 (October 14, 1980) 65 (July 24, 1989)

4HFR34C660 14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part April 7, 1986 April 7, 1986
35-5 (October 14, 1980) 21, Subpart J
July 7, 1992
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C661 July 7, 1992 (February 23, 1995
35-6 (August 18, 1990) 21, Subpart J
with revised ratings)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C662 February 23, 1995 February 23, 1995
35-6 (August 18, 1990) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21-
4HFR34C663 July 23, 1996 August 8, 1996
35-6 (August 18, 1990) 73 (May 07, 1996)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C664 May 16, 1997 May 16, 1997
35-6 (August 18, 1990) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C665 August 11, 1999 August 11, 1999
35-6 (August 18, 1990) 21, Subpart J
14 CFR Part 35, Amdt 35-1
to 35-5, except Appendix A
as amended at 35-6, 35-39,
and 35.42 as amended by ODA under 14 CFR Part
4HFR34C668 September 25, 2020 May 13, 2022
amendments 35-1 through 183, Subpart D
35-8 and 35.40 amended at
35-8 in lieu of 35.41
as amended at 35-3
May 26, 1982 May 11, 1983
14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21-
4HFR34C752 amended March 18, (July 29, 1983
35-5 (October 14, 1980) 56 (February 08, 1982)
1983 with revised ratings)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C754 January 11, 1984 January 11, 1984
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C755 February 3, 1986 February 3, 1986
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C756 April 29, 1988 April 29, 1988
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21-
4JFR34C758 October 1, 1986 December 31, 1987
35-5 (October 14, 1980) 60 (April 13, 1987)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C760 January 29, 1990 January 29, 1990
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C761 January 29, 1990 January 29, 1990
35-5 (October 14, 1980) 21, Subpart J
September 17, 1987
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C762 September 17, 1987 (January 30, 1989
35-5 (October 14, 1980) 21, Subpart J
with revised ratings)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C763 February 26, 1988 February 26, 1988
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C764 April 15, 1989 April 15, 1989
35-5 (October 14, 1980) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C766 March 13, 1991 March 13, 1991
35-6 (August 18, 1990) 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C768 April 1, 1991 April 1, 1991
35-6 (August 18, 1990) 21, Subpart J
September 30, 1991
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR Part
4HFR34C769 September 30, 1991 (September 4, 1996
35-6 (August 18, 1990) 21, Subpart J
with revised ratings)
 Rev. 17 Page 5 of 9 P3NE

Certification Basis: (cont’d)

Propeller Certification Basis Method of Approval Application Date Approval Date

May 12, 1992
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR
4HFR34C771 May 12, 1992 (January 27, 1999
35-6 (August 18, 1990) Part 21, Subpart J
with revised ratings)
14 CFR Part 35, Amdt 35-1 to 14 CFR Part 21, Amdt 21-
4JFR36C772 February 15, 1996 February 15, 1996
35-6 (August 18, 1990) 71 (September 11, 1992)
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR
4HFR34C773 September 4, 1996 September 4, 1996
35-6 (August 18, 1990) Part 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR
4HFR34C774 May 14, 1997 May 14, 1997
35-6 (August 18, 1990) Part 21, Subpart J
14 CFR Part 35, Amdt 35-1 to DOA under 14 CFR
4HFR34C775 February 25, 1999 February 25, 1999
35-6 (August 18, 1990) Part 21, Subpart J
14 CFR Part 35, Amdt 35-1 to
35-5 (October 14, 1980),
except 35.39 as amended at ODA under 14 CFR
4HFR34C778 October 31, 2013 August 31, 2015
35-8, and 35.40 as amended at Part 183, Subpart D
35-8 in lieu of 35.41 as
amended at 35-3
14 CFR Part 35, Amdt 35-1 to
35-6, except 35.39 and 35.42
ODA under 14 CFR
4HFR34C779 as amended at 35-8, and 35.40 May 18, 2018 August 6, 2020
Part 183, Subpart D
as amended at 35-8 in lieu of
35.41 as amended at 35-3

Production Basis: Production Certificate No. 3

NOTE 1. Hub Model Designation.

Basic Model Designation

[X] 4 H F R 34 C 752 - [X] [X] [X]

Letters denoting changes that may affect eligibility or
interchangeability.
Numerals defining specific design and major change affecting
eligibility or interchangeability of parts.
Type of propeller - C, constant speed.
McCauley blade shank size.
When present, indicates reverse pitch capability.
Type of propeller - F, full-feathering.
H denotes special flange - 4-1/4" bolt circle with eight 9/16" studs
and two or four 1/2" dowels.
J denotes special flange - 5-1/8" bolt circle with twelve 9/16" studs
and two 5/8" dowels.
Number of blades.

Indicates dowel location with respect to centerline of No. 1 blade

socket, viewing hub from flange mounting face. Blank - 0, 90, 180
and 270 degrees clockwise.
P3NE Page 6 of 9 Rev. 17

NOTE 2. Blade Model Designation.

Basic Model Designation

[X] - [X] 106 LA - 0

Change in diameter from basic, + or -, in inches.
Characteristics of blade design (planform, etc.). Suffix [X] indicates blade
butt staking dimensions for actuating pin attachment.
Blade design diameter in inches.

Letter designating direction of rotation; no letter (blank) indicates clockwise (viewed from
downstream), L indicates counter-clockwise.
Letter designating minor change not affecting eligibility or interchangeability.

NOTE 3. Not applicable.

NOTE 4. Feathering. All propeller models are approved for feathering and unfeathering capability when
installed with appropriate feather/unfeathering controls.

Reversing. All propeller models are approved for installation with appropriate reversing controls.

NOTE 5. Left Hand Models. The left hand version of an approved model propeller is approved at the same
rating and diameter limitations as listed for the right hand model.

NOTE 6. Not applicable.

NOTE 7. Accessories. Substantiated accessories not included in propeller type design:

a. Propeller Anti-icing

(1) Model 4HFR34C652/L106L[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-5322.

(2) Model 4HFR34C653/L106F[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-6401.

(3) Model 4HFR34C660/L90G[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-5322.

(4) Model 4HFR34C661/90LN[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-6817.

(5) Model 4HFR34C662/L108F[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-6401.

(6) Model 4HFR34C663/L106K[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-6401.

(7) Model 4HFR34C665/L106FR[X] is eligible with McCauley deicers, P/N B-40183 or B-

40245 series, installed per McCauley Specification MC-2611 and drawing E-7627.

(8) Model 4HFR34C752/106L[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-5410.

(9) Model 4HFR34C754/94L[X] and 4HFR34C755/94L[X] are eligible with McCauley deicers,
P/N B-40183 or B-40245 series, installed per McCauley Specification MC-2611 and drawing
E-5550.
Rev. 17 Page 7 of 9 P3NE

(10) Model 4HFR34C756/106LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-5707.

(11) Model 4JFR34C758/106LN[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-5745.

(12) Model 4HFR34C760/95D[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6120.

(13) Model 4HFR34C762/94LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and drawing E-5550.

(14) Model 4HFR34C763/94LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6223.

(15) Model 4HFR34C764/94LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6314.

(16) Model 4HFR34C766/94LN[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6720.

(17) Model 4HFR34C768/94LM[X] and 4HFR34C771/94L[X] are eligible with McCauley

deicers, P/N B-40183 or B-40245 series, installed per McCauley Specification MC-2611 and
McCauley drawing E-6790.

(18) Model 4HFR34C769/94LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6790.

(19) Model 4HFR34C773/94LM[X] is eligible with McCauley deicers, P/N B-40183 or B-40245
series, installed per McCauley Specification MC-2611 and McCauley drawing E-6790.

(20) Model 4HFR34C664/L106LA with McCauley deicer, P/N B-40183-07, installed per
McCauley Specification MC-2611 and McCauley drawing E-6401.

(21) Model 4JFR36C772/112GCA with McCauley deicer, P/N B-40245-54, installed per
McCauley Specification MC-2611 and McCauley drawing E-7320.

(22) Model 4HFR34C778/102BH[X] with McCauley deicer, P/N B-40245-56, reference

McCauley drawing E-5550 or McCauley anti-ice feed shoe, P/N C-40323-83, reference
McCauley drawing E-5550.

(23) Model 4HFR34C779/110FD[X] with McCauley deicer, P/N B-40183-22, reference

McCauley drawing C-8180.

b. Propeller Spinner

(1) Model 4HFR34C652/L106L[X] with spinner, reference McCauley drawing E-5322.

(2) Model 4HFR34C653/L106F[X] with spinner, reference McCauley drawing E-6401.

(3) Model 4HFR34C660/L90G[X] with spinner, reference McCauley drawing E-5322.

(4) Model 4HFR34C661/90LN[X] with spinner, reference McCauley drawing E-6817.

(5) Model 4HFR34C662/L108F[X] with spinner, reference McCauley drawing E-6401.

(6) Model 4HFR34C663/L106K[X] with spinner, reference McCauley drawing E-6401.

P3NE Page 8 of 9 Rev. 17

(7) Model 4HFR34C665/L106FR[X] with spinner, reference McCauley drawing E-7627.

(8) Model 4HFR34C668/110GS[X] with spinner, reference McCauley drawing E-7968.

(9) Model 4HFR34C752/106L[X] with spinner, reference McCauley drawing E-5410.

(10) Models 4HFR34C754/94L[X], 4HFR34C755/94L[X] and 4HFR34C771/94L[X] with

spinner, reference McCauley drawing E-5550 and E-6790.

(11) Model 4HFR34C755/94L[X] with spinner, reference McCauley drawing E-5550.

(12) Model 4HFR34C756/106LM[X] with spinner, reference McCauley drawing E-5707.

(13) Model 4JFR34C758/106LN[X] with spinner, reference McCauley drawing E-5745.

(14) Model 4HFR34C760/95D[X] with spinner, reference McCauley drawing E-6120.

(15) Model 4HFR34C761/L95D[X] with spinner, reference McCauley drawing E-6122.

(16) Model 4HFR34C762/94LM[X] with spinner; reference McCauley drawing E-5550.

(17) Model 4HFR34C763/94LM[X] with spinner; reference McCauley drawing E-6223.

(18) Model 4HFR34C764/94LM[X] with spinner; reference McCauley drawing E-6314.

(19) Model 4HFR34C766/94LN[X] with spinner; reference McCauley drawing E-6720.

(20) Model 4HFR34C768/94LM[X] with spinner; reference McCauley drawing E-6790.

(21) Model 4HFR34C769/94LM[X] with spinner; reference McCauley drawing E-6790.

(22) Model 4HFR34C773/94LM[X] with spinner; reference McCauley drawing E-6790.

(23) Model 4HFR34C775/96MG[X] with spinner, reference McCauley drawing E-6790.

(24) Model 4HFR34C664/L106LA with electric deicer spinner, reference McCauley

drawing E-5369.

(25) Model 4JFR36C772/112GCA with electric deicer spinner, reference McCauley

drawing E-7326.

(26) Model 4HFR34C774/94LPA with electric deicer spinner, reference McCauley

drawing E-6756.

(27) Model 4HFR34C778/102BH[X] with spinner, reference McCauley drawing E-8107.

(28) Model 4HFR34C779/110FD[X] with spinner, reference McCauley drawing E-8184.

NOTE 8. Not applicable.

NOTE 9. Not applicable.

Rev. 17 Page 9 of 9 P3NE

NOTE 10. The propeller installation must be approved as part of the aircraft type certificate to demonstrate
compliance with the applicable aircraft airworthiness standards.

For the propeller model 4HFR34C668/110GS[X], only propeller components of the pitch control
system have been evaluated as part of the propeller Type Design. Installation approval on an aircraft
must be evaluated and approved by an appropriate authority.

Installation of propeller model 4HFR34C668/110GS[X] is limited to pusher aircraft applications.

NOTE 11. Special Limits. Please reference the airworthiness limitations section of the appropriate
Owner/Operator Information Manual. Propeller Models 4HFR34C663/L106K[X] and
4HFR34C665/L106FR[X] contain life limited parts. Propeller Model 4HFR34C761/L95D[X] contain
life limited parts but is not referenced in the Owner/Operator Manual as it has not been produced.

NOTE 12. Special Notes. Propeller Model 4HFR34C663/L106F[X] and its associated data, approved April 19,
1996, has been removed from this Type Certificate Data Sheet as of Revision 10, since no propellers
of this model were produced.

--- END ---