SDS 36903 Jotafix PU Topcoat Comp B Euk GB

Conforms to Regulation (EC) No. 453/2010 (REACH), Annex II, as amended by Regulation (EU) No.
2015/830
SAFETY DATA SHEET
Jotafix PU Topcoat Comp B

SECTION 1: Identification of the substance/mixture and of the company/
undertaking
1.1 Product identifier
Product name : Jotafix PU Topcoat Comp B
Product code : 36903
Product description : Hardener. Paint.
Product type : Liquid.
Other means of : Not available.
identification
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use in coatings - Industrial use
Use in coatings - Professional use
Not available.
1.3 Details of the supplier of the safety data sheet
Jotun Paints (Europe) Ltd.
Stather Road
Flixborough, Scunthorpe
North Lincolnshire
DN15 8RR
England
Tel: +44 17 24 40 00 00
Fax: +44 17 24 40 01 00
SDSJotun@jotun.com
1.4 Emergency telephone number

Contact NHS Direct; phone 0845 4647 or 111. Open 24/7.
1,2 36903
^(ValidationDate) 1
Yes
SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Product definition : Mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Flam. Liq. 3, H226
Acute Tox. 4, H332
Skin Sens. 1, H317
STOT SE 3, H335
The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended.
See Section 11 for more detailed information on health effects and symptoms.
2.2 Label elements

Hazard pictograms :
Signal word : Warning.
Date of issue/Date of revision : 18.05.2020 Date of previous issue : No previous validation Version :1 1/16
Conforms to Regulation (EC) No. 453/2010 (REACH), Annex II, as amended by Regulation (EU) No. 2015/830
SECTION 2: Hazards identification

Hazard statements : H226 - Flammable liquid and vapour.
H332 - Harmful if inhaled.
H317 - May cause an allergic skin reaction.
H335 - May cause respiratory irritation.
Precautionary statements
General : Not applicable.
Prevention : P280 - Wear protective gloves.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P271 - Use only outdoors or in a well-ventilated area.
P261 - Avoid breathing vapour.
Response : P304 + P340 + P312 - IF INHALED: Remove person to fresh air and keep
comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.
P302 + P352 - IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 - If skin irritation or rash occurs: Get medical attention.
Storage : P403 - Store in a well-ventilated place.
P235 - Keep cool.
Disposal : P501 - Dispose of contents and container in accordance with all local, regional,
national and international regulations.
Hazardous ingredients : hexane, 1,6-diisocyanato-, homopolymer
hexamethylene-di-isocyanate
Supplemental label : Contains isocyanates. May produce an allergic reaction.
elements
Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market and
use of certain dangerous
substances, mixtures and
articles
Special packaging requirements
Containers to be fitted : Not applicable.
with child-resistant
fastenings
Tactile warning of danger : Not applicable.
2.3 Other hazards

Product meets the criteria : This mixture does not contain any substances that are assessed to be a PBT or a
for PBT or vPvB according vPvB.
to Regulation (EC) No.
1907/2006, Annex XIII
Other hazards which do : None known.
not result in classification
SECTION 3: Composition/information on ingredients

3.2 Mixtures : Mixture
Product/ingredient name Identifiers Weight % Regulation (EC) No. Type
1272/2008 [CLP]
hexane, 1,6-diisocyanato-, REACH #: ≥50 - ≤75 Acute Tox. 4, H332 [1] [2]
homopolymer 01-2119488934-20 Skin Sens. 1, H317
EC: 500-060-2 STOT SE 3, H335
CAS: 28182-81-2
2-methoxy-1-methylethyl acetate REACH #: ≥10 - <20 Flam. Liq. 3, H226 [1] [2]
01-2119475791-29 STOT SE 3, H336
EC: 203-603-9
CAS: 108-65-6
SECTION 3: Composition/information on ingredients

Index: 607-195-00-7
xylene REACH #: <10 Flam. Liq. 3, H226 [1] [2]
01-2119488216-32 Acute Tox. 4, H312
EC: 215-535-7 Acute Tox. 4, H332
CAS: 1330-20-7 Skin Irrit. 2, H315
Index: 601-022-00-9 Eye Irrit. 2, H319
STOT SE 3, H335
Asp. Tox. 1, H304
ethylbenzene REACH #: ≤5 Flam. Liq. 2, H225 [1] [2]
01-2119489370-35 Acute Tox. 4, H332
EC: 202-849-4 STOT RE 2, H373 (hearing
CAS: 100-41-4 organs)
Index: 601-023-00-4 Asp. Tox. 1, H304
hexamethylene-di-isocyanate REACH #: ≤0.3 Acute Tox. 2, H330 [1] [2]
01-2119457571-37 Skin Irrit. 2, H315
EC: 212-485-8 Eye Irrit. 2, H319
CAS: 822-06-0 Resp. Sens. 1, H334
Skin Sens. 1, H317
STOT SE 3, H335
See Section 16 for the full
text of the H statements
declared above.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment, are PBTs, vPvBs or Substances of
equivalent concern, or have been assigned a workplace exposure limit and hence require reporting in this section.
Type
[1] Substance classified with a health or environmental hazard
[2] Substance with a workplace exposure limit
[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII
[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII
[5] Substance of equivalent concern
[6] Additional disclosure due to company policy
Occupational exposure limits, if available, are listed in Section 8.
SECTION 4: First aid measures

4.1 Description of first aid measures
General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery
position and seek medical advice.
Eye contact : Remove contact lenses, irrigate copiously with clean, fresh water, holding the
eyelids apart for at least 10 minutes and seek immediate medical advice.
Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognised skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show the container or label.
Keep person warm and at rest. Do NOT induce vomiting.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate
mask or self-contained breathing apparatus. It may be dangerous to the person
providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing
thoroughly with water before removing it, or wear gloves.
4.2 Most important symptoms and effects, both acute and delayed
SECTION 4: First aid measures

There are no data available on the mixture itself. The mixture has been assessed following the conventional method
of the CLP Regulation (EC) No 1272/2008 and is classified for toxicological properties accordingly. See Sections 2
and 3 for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Solvents may cause some of the above effects by absorption through the
skin. Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin, resulting in non-
allergic contact dermatitis and absorption through the skin. Ingestion may cause nausea, diarrhea and vomiting.
Over-exposure signs/symptoms
Eye contact : No specific data.
Inhalation : Adverse symptoms may include the following:
respiratory tract irritation
coughing
Skin contact : Adverse symptoms may include the following:
irritation
redness
Ingestion : No specific data.
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments : No specific treatment.
See toxicological information (Section 11)
SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing : Recommended: alcohol-resistant foam, CO₂, powders, water spray.
media
Unsuitable extinguishing : Do not use water jet.
media
5.2 Special hazards arising from the substance or mixture

Hazards from the : Fire will produce dense black smoke. Exposure to decomposition products may
substance or mixture cause a health hazard.
Hazardous combustion : Decomposition products may include the following materials: carbon monoxide,
products carbon dioxide, smoke, oxides of nitrogen.
5.3 Advice for firefighters

Special protective actions : Cool closed containers exposed to fire with water. Do not release runoff from fire to
for fire-fighters drains or watercourses.
Special protective : Appropriate breathing apparatus may be required.
equipment for fire-fighters
SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures
For non-emergency : Exclude sources of ignition and ventilate the area. Avoid breathing vapour or mist.
personnel Refer to protective measures listed in sections 7 and 8.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any
information in Section 8 on suitable and unsuitable materials. See also the
information in "For non-emergency personnel".
SECTION 6: Accidental release measures

6.2 Environmental : Do not allow to enter drains or watercourses. If the product contaminates lakes,
precautions rivers, or sewers, inform the appropriate authorities in accordance with local
regulations.
6.3 Methods and material : Contain and collect spillage with non-combustible, absorbent material e.g. sand,
for containment and earth, vermiculite or diatomaceous earth and place in container for disposal
cleaning up according to local regulations (see Section 13). Preferably clean with a detergent.
Avoid using solvents.
6.4 Reference to other : See Section 1 for emergency contact information.

sections See Section 8 for information on appropriate personal protective equipment.
See Section 13 for additional waste treatment information.
SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
7.1 Precautions for safe handling
Prevent the creation of flammable or explosive concentrations of vapours in air and avoid vapour concentrations
higher than the occupational exposure limits.
In addition, the product should only be used in areas from which all naked lights and other sources of ignition have
been excluded. Electrical equipment should be protected to the appropriate standard.
Mixture may charge electrostatically: always use earthing leads when transferring from one container to another.
Operators should wear antistatic footwear and clothing and floors should be of the conducting type.
Keep away from heat, sparks and flame. No sparking tools should be used.
Avoid contact with skin and eyes. Avoid the inhalation of dust, particulates, spray or mist arising from the application
of this mixture. Avoid inhalation of dust from sanding.
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.
Put on appropriate personal protective equipment (see Section 8).
Never use pressure to empty. Container is not a pressure vessel.
Always keep in containers made from the same material as the original one.
Comply with the health and safety at work laws.
Do not allow to enter drains or watercourses.
Information on fire and explosion protection
Vapours are heavier than air and may spread along floors. Vapours may form explosive mixtures with air.
When operators, whether spraying or not, have to work inside the spray booth, ventilation is unlikely to be sufficient to
control particulates and solvent vapour in all cases. In such circumstances they should wear a compressed air-fed
respirator during the spraying process and until such time as the particulates and solvent vapour concentration has
fallen below the exposure limits.
7.2 Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations.
Notes on joint storage
Keep away from: oxidising agents, strong alkalis, strong acids.
Additional information on storage conditions
Observe label precautions. Store in a dry, cool and well-ventilated area. Keep away from heat and direct sunlight.
Keep away from sources of ignition. No smoking. Prevent unauthorised access. Containers that have been opened
must be carefully resealed and kept upright to prevent leakage.
7.3 Specific end use(s)

Recommendations : Not available.
Industrial sector specific : Not available.
solutions
SECTION 8: Exposure controls/personal protection

The information in this section contains generic advice and guidance. Information is provided based on typical
anticipated uses of the product. Additional measures might be required for bulk handling or other uses that could
significantly increase worker exposure or environmental releases.
8.1 Control parameters
Occupational exposure limits
Product/ingredient name Exposure limit values
hexane, 1,6-diisocyanato-, homopolymer EH40/2005 WELs (United Kingdom (UK), 8/2018). Inhalation
sensitiser.
STEL: 0.07 mg/m³, (as NCO) 15 minutes.
TWA: 0.02 mg/m³, (as NCO) 8 hours.
2-methoxy-1-methylethyl acetate EH40/2005 WELs (United Kingdom (UK), 8/2018). Absorbed
through skin.
STEL: 548 mg/m³ 15 minutes.
STEL: 100 ppm 15 minutes.
TWA: 274 mg/m³ 8 hours.
TWA: 50 ppm 8 hours.
xylene EH40/2005 WELs (United Kingdom (UK), 8/2018). Absorbed
through skin.
ethylbenzene EH40/2005 WELs (United Kingdom (UK), 8/2018). Absorbed
through skin.
hexamethylene-di-isocyanate EH40/2005 WELs (United Kingdom (UK), 8/2018). Inhalation
sensitiser. Notes: as NCO
STEL: 0.07 mg/m³, (as NCO) 15 minutes.
TWA: 0.02 mg/m³, (as NCO) 8 hours.
Recommended monitoring : If this product contains ingredients with exposure limits, personal, workplace
procedures atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to monitoring standards, such as
the following: European Standard EN 689 (Workplace atmospheres - Guidance for
the assessment of exposure by inhalation to chemical agents for comparison with
limit values and measurement strategy) European Standard EN 14042 (Workplace
atmospheres - Guide for the application and use of procedures for the assessment
of exposure to chemical and biological agents) European Standard EN 482
(Workplace atmospheres - General requirements for the performance of procedures
for the measurement of chemical agents) Reference to national guidance
documents for methods for the determination of hazardous substances will also be
required.
DNELs/DMELs
Product/ingredient name Exposure Value Population Effects
2-methoxy-1-methylethyl acetate Long term Dermal 153.5 mg/ Workers Systemic
kg bw/day
Long term 275 mg/m³ Workers Systemic
Inhalation
Long term Dermal 54.8 mg/ General Systemic
kg bw/day population
[Consumers]
Long term 33 mg/m³ General Systemic
Inhalation population
[Consumers]
Long term Oral 1.67 mg/ General Systemic

kg bw/day population
[Consumers]
xylene Short term 289 mg/m³ Workers Systemic
Inhalation
Short term 289 mg/m³ Workers Local
Inhalation
Long term Dermal 180 mg/kg Workers Systemic
bw/day
Inhalation
Long term Dermal 108 mg/kg General Systemic
bw/day population
[Consumers]
Long term 14.8 mg/m³ General Systemic
[Consumers]
Long term Oral 1.6 mg/kg General Systemic
bw/day population
[Consumers]
ethylbenzene Short term 293 mg/m³ Workers Local
Inhalation
Long term Dermal 180 mg/kg Workers Systemic
bw/day
Inhalation
Long term 15 mg/m³ General Systemic
[Consumers]
Long term Oral 1.6 mg/kg General Systemic
bw/day population
[Consumers]
hexamethylene-di-isocyanate Short term 0.07 mg/m³ Workers Systemic
Inhalation
Short term 0.07 mg/m³ Workers Local
Inhalation
Long term 0.035 mg/ Workers Systemic
Inhalation m³
Long term 0.035 mg/ Workers Local
Inhalation m³
PNECs
Product/ingredient name Compartment Detail Value Method Detail
2-methoxy-1-methylethyl acetate Fresh water 0.635 mg/l -
Marine 0.0635 mg/l -
Sewage Treatment 100 mg/l -
Plant
Fresh water sediment 3.29 mg/kg dwt -
Marine water sediment 0.329 mg/kg dwt -
Soil 0.29 mg/kg dwt -
xylene Fresh water 0.327 mg/l -
Marine 0.327 mg/l -
Sewage Treatment 6.58 mg/l -
Plant
Marine water sediment 12.46 mg/kg dwt -
ethylbenzene Fresh water 0.1 mg/l -
Marine 0.01 mg/l -
Plant

Secondary Poisoning 20 mg/kg -
hexamethylene-di-isocyanate Fresh water 0.0774 mg/l -
Marine 0.00774 mg/l -
Plant
Fresh water sediment 0.01334 mg/kg -
dwt
Marine water sediment 0.001334 mg/kg -
dwt
8.2 Exposure controls

Appropriate engineering : Provide adequate ventilation. Where reasonably practicable, this should be
controls achieved by the use of local exhaust ventilation and good general extraction. If
these are not sufficient to maintain concentrations of particulates and solvent
vapours below the OEL, suitable respiratory protection must be worn.
Individual protection measures
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Safety eyewear complying to EN 166 should be used when a risk assessment
indicates this is necessary to avoid exposure to liquid splashes, mists, gases or
dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-
shields.
Skin protection
Gloves : There is no one glove material or combination of materials that will give unlimited
resistance to any individual or combination of chemicals.
The breakthrough time must be greater than the end use time of the product.
The instructions and information provided by the glove manufacturer on use,
storage, maintenance and replacement must be followed.
Gloves should be replaced regularly and if there is any sign of damage to the glove
material.
Always ensure that gloves are free from defects and that they are stored and used
correctly.
The performance or effectiveness of the glove may be reduced by physical/chemical
damage and poor maintenance.
Barrier creams may help to protect the exposed areas of the skin but should not be
applied once exposure has occurred.
Wear suitable gloves tested to EN374.
Not recommended, gloves(breakthrough time) < 1 hour: neoprene
May be used, gloves(breakthrough time) 4 - 8 hours: butyl rubber, PVC
Recommended, gloves(breakthrough time) > 8 hours: 4H, Teflon, nitrile rubber,
Viton®, polyvinyl alcohol (PVA)
For right choice of glove materials, with focus on chemical resistance and time of
penetration, seek advice by the supplier of chemical resistant gloves.
The user must check that the final choice of type of glove selected for handling this
product is the most appropriate and takes into account the particular conditions of
use, as included in the user's risk assessment.
Body protection : Personnel should wear antistatic clothing made of natural fibres or of high-
temperature-resistant synthetic fibres.
Other skin protection : Appropriate footwear and any additional skin protection measures should be
selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.

Respiratory protection : If workers are exposed to concentrations above the exposure limit, they must use a
respirator according to EN 140. Use respiratory mask with charcoal and dust filter
when spraying this product, according to EN 14387(as filter combination A2-P2). In
confined spaces, use compressed-air or fresh-air respiratory equipment. When use
of roller or brush, consider use of charcoalfilter.
Environmental exposure : Do not allow to enter drains or watercourses.
controls
SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties
Appearance
Physical state : Liquid.
Colour : Clear.
Odour : Characteristic.
Odour threshold : Not applicable.
pH : Not applicable.
Melting point/freezing point : Not applicable.
Initial boiling point and : Lowest known value: 136.1°C (277°F) (ethylbenzene). Weighted average:
boiling range 140.97°C (285.7°F)
Flash point : Closed cup: 38°C
Evaporation rate : Highest known value: 0.84 (ethylbenzene) Weighted average: 0.54compared
with butyl acetate
Flammability (solid, gas) : Not applicable.
Upper/lower flammability or : 0.8 - 7%
explosive limits
Vapour pressure : Highest known value: 1.2 kPa (9.3 mm Hg) (at 20°C) (ethylbenzene). Weighted
average: 0.17 kPa (1.28 mm Hg) (at 20°C)
Vapour density : Highest known value: 4.6 (Air = 1) (2-methoxy-1-methylethyl acetate).
Weighted average: 4.15 (Air = 1)
Density : 1.07 g/cm³
Solubility(ies) : Insoluble in the following materials: cold water and hot water.
Partition coefficient: n-octanol/ : Not available.
water
Auto-ignition temperature : Lowest known value: 333°C (631.4°F) (2-methoxy-1-methylethyl acetate).
Decomposition temperature : Not available.
Viscosity : Not available.
Explosive properties : Not available.
Oxidising properties : Not available.
9.2 Other information

No additional information.
SECTION 10: Stability and reactivity

10.1 Reactivity : No specific test data related to reactivity available for this product or its ingredients.
10.2 Chemical stability : Stable under recommended storage and handling conditions (see Section 7).
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.
10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
SECTION 10: Stability and reactivity

10.6 Hazardous : Decomposition products may include the following materials: carbon monoxide,
decomposition products carbon dioxide, smoke, oxides of nitrogen.
Thermal decomposition (>200°C) may liberate relatively low concentrations of isocyanates.
SECTION 11: Toxicological information

11.1 Information on toxicological effects
There are no data available on the mixture itself. The mixture has been assessed following the conventional method of
the CLP Regulation (EC) No 1272/2008 and is classified for toxicological properties accordingly. See Sections 2 and 3
for details.
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result
in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the
kidneys, liver and central nervous system. Solvents may cause some of the above effects by absorption through the
skin. Repeated or prolonged contact with the mixture may cause removal of natural fat from the skin, resulting in non-
allergic contact dermatitis and absorption through the skin. Ingestion may cause nausea, diarrhea and vomiting.
Acute toxicity
Product/ingredient name Result Species Dose Exposure
2-methoxy-1-methylethyl LD50 Dermal Rabbit >5 g/kg -
acetate
LD50 Oral Rat 8532 mg/kg -
xylene LC50 Inhalation Vapour Rat 20 mg/l 4 hours
TDLo Dermal Rabbit 4300 mg/kg -
ethylbenzene LC50 Inhalation Vapour Rat - Male 17.8 mg/l 4 hours
LD50 Dermal Rabbit >5000 mg/kg -
hexamethylene-di- LC50 Inhalation Dusts and Rat 124 mg/m³ 4 hours
isocyanate mists
Acute toxicity estimates
Route ATE value
Dermal 11733.33 mg/kg
Inhalation (vapours) 81.68 mg/l
Inhalation (dusts and mists) 2.01 mg/l
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
hexane, 1,6-diisocyanato-, Eyes - Moderate irritant Rabbit - 100 mg -
homopolymer
Skin - Moderate irritant Rabbit - 500 mg -
xylene Eyes - Mild irritant Rabbit - 87 milligrams -
Skin - Mild irritant Rat - 8 hours 60 -
microliters
hexamethylene-di- Skin - Mild irritant Mammal - - - -
isocyanate species
unspecified
Eyes - Mild irritant Mammal - - - -
species
unspecified
Sensitisation
Product/ingredient name Route of Species Result
exposure
hexane, 1,6-diisocyanato-, skin Mammal - species Sensitising
homopolymer unspecified
hexamethylene-di- skin Mammal - species Sensitising
isocyanate unspecified
Mutagenicity
SECTION 11: Toxicological information

No known significant effects or critical hazards.
Carcinogenicity
Reproductive toxicity
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Specific target organ toxicity (single exposure)
Product/ingredient name Category Route of Target organs
exposure
hexane, 1,6-diisocyanato-, homopolymer Category 3 Not applicable. Respiratory tract
irritation
2-methoxy-1-methylethyl acetate Category 3 Not applicable. Narcotic effects
xylene Category 3 Not applicable. Respiratory tract
irritation
hexamethylene-di-isocyanate Category 3 Not applicable. Respiratory tract
irritation
Specific target organ toxicity (repeated exposure)
Product/ingredient name Category Route of Target organs
exposure
ethylbenzene Category 2 Not determined hearing organs
Aspiration hazard
Product/ingredient name Result
xylene ASPIRATION HAZARD - Category 1
ethylbenzene ASPIRATION HAZARD - Category 1
Other information : None identified.
SECTION 12: Ecological information

12.1 Toxicity
There are no data available on the mixture itself.
Do not allow to enter drains or watercourses.
The mixture has been assessed following the summation method of the CLP Regulation (EC) No 1272/2008 and is
not classified as hazardous to the environment.
Product/ingredient name Result Species Exposure
ethylbenzene Acute EC50 7.2 mg/l Algae 48 hours
Acute EC50 2.93 mg/l Daphnia 48 hours
Acute LC50 4.2 mg/l Fish 96 hours
12.2 Persistence and degradability

Not available.
Product/ingredient name Aquatic half-life Photolysis Biodegradability
xylene - - Readily
ethylbenzene - - Readily
12.3 Bioaccumulative potential
SECTION 12: Ecological information

Product/ingredient name LogPow BCF Potential
hexane, 1,6-diisocyanato-, 5.54 367.7 low
homopolymer
2-methoxy-1-methylethyl 1.2 - low
acetate
xylene 3.12 8.1 to 25.9 low
ethylbenzene 3.6 - low
hexamethylene-di- 0.02 57.63 low
isocyanate
12.4 Mobility in soil

Soil/water partition : Not available.
coefficient (KOC)
Mobility : Not available.
12.5 Results of PBT and vPvB assessment

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
12.6 Other adverse effects : No known significant effects or critical hazards.
SECTION 13: Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methods
Product
Methods of disposal : The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction.
Hazardous waste : Yes.
Disposal considerations : Do not allow to enter drains or watercourses.
Dispose of according to all federal, state and local applicable regulations.
If this product is mixed with other wastes, the original waste product code may no
longer apply and the appropriate code should be assigned.
For further information, contact your local waste authority.
European waste : 08 01 11* Waste paint and varnish containing organic solvents or other dangerous
catalogue (EWC) substances
Packaging
Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
Disposal considerations : Using information provided in this safety data sheet, advice should be obtained from
the relevant waste authority on the classification of empty containers.
Empty containers must be scrapped or reconditioned.
Dispose of containers contaminated by the product in accordance with local or
national legal provisions.
Type of packaging European waste catalogue (EWC)
CEPE Paint Guidelines 15 01 10* packaging containing residues of or contaminated by
hazardous substances
SECTION 13: Disposal considerations

Special precautions : This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapour from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
SECTION 14: Transport information

ADR/RID ADN IMDG IATA
14.1 UN number UN1866 UN1866 UN1866 UN1866
14.2 UN proper Resin solution Resin solution Resin solution Resin solution
shipping name
14.3 Transport 3 3 3 3
hazard class(es)
14.4 Packing III III III III

group
14.5 No. No. No. No.
Environmental
hazards
Additional information
ADR/RID : ADR/RID: Viscous substance. Not restricted, ref. chapter 2.2.3.1.5 (applicable to
receptacles < 450 litre capacity).
Hazard identification number 30
Tunnel code (D/E)
IMDG : IMDG: Viscous substance. Transport in accordance with paragraph 2.3.2.5
(applicable to receptacles < 450 litre capacity).
Emergency schedules F-E, S-E
14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
14.7 Transport in bulk : Not applicable.

according to Annex II of
Marpol and the IBC Code
SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH)
Annex XIV - List of substances subject to authorisation
Annex XIV
None of the components are listed.
Substances of very high concern
None of the components are listed.
SECTION 15: Regulatory information

Annex XVII - Restrictions : Not applicable.
on the manufacture,
placing on the market
and use of certain
dangerous substances,
mixtures and articles
Other EU regulations
VOC : The provisions of Directive 2004/42/EC on VOC apply to this product. Refer to the
product label and/or technical data sheet for further information.
VOC for Ready-for-Use : Not applicable.
Mixture
Europe inventory : All components are listed or exempted.
Ozone depleting substances (1005/2009/EU)
Not listed.
Prior Informed Consent (PIC) (649/2012/EU)
Not listed.
Seveso Directive
This product may add to the calculation for determining whether a site is within the scope of the Seveso Directive on
major accident hazards.
National regulations
Industrial use : The information contained in this safety data sheet does not constitute the user’s
own assessment of workplace risks, as required by other health and safety
legislation. The provisions of the national health and safety at work regulations apply
to the use of this product at work.
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol (Annexes A, B, C, E)

Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
15.2 Chemical safety : No Chemical Safety Assessment has been carried out.
assessment
SECTION 16: Other information

Indicates information that has changed from previously issued version.
Abbreviations and : ATE = Acute Toxicity Estimate
acronyms CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
1272/2008]
DMEL = Derived Minimal Effect Level
DNEL = Derived No Effect Level
EUH statement = CLP-specific Hazard statement
PBT = Persistent, Bioaccumulative and Toxic
PNEC = Predicted No Effect Concentration

RRN = REACH Registration Number
vPvB = Very Persistent and Very Bioaccumulative
Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]
Classification Justification
Flam. Liq. 3, H226 On basis of test data
Acute Tox. 4, H332 Calculation method
Skin Sens. 1, H317 Calculation method
STOT SE 3, H335 Calculation method
Full text of abbreviated H statements
H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
H332 Harmful if inhaled.
H334 May cause allergy or asthma symptoms or breathing difficulties if
inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated
exposure.
Full text of classifications [CLP/GHS]
Acute Tox. 2, H330 ACUTE TOXICITY (inhalation) - Category 2
Acute Tox. 4, H312 ACUTE TOXICITY (dermal) - Category 4
Acute Tox. 4, H332 ACUTE TOXICITY (inhalation) - Category 4
Asp. Tox. 1, H304 ASPIRATION HAZARD - Category 1
Eye Irrit. 2, H319 SERIOUS EYE DAMAGE/EYE IRRITATION - Category 2
Flam. Liq. 2, H225 FLAMMABLE LIQUIDS - Category 2
Flam. Liq. 3, H226 FLAMMABLE LIQUIDS - Category 3
Resp. Sens. 1, H334 RESPIRATORY SENSITISATION - Category 1
Skin Irrit. 2, H315 SKIN CORROSION/IRRITATION - Category 2
Skin Sens. 1, H317 SKIN SENSITISATION - Category 1
STOT RE 2, H373 SPECIFIC TARGET ORGAN TOXICITY - REPEATED
EXPOSURE - Category 2
STOT SE 3, H335 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE
(Respiratory tract irritation) - Category 3
STOT SE 3, H336 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE
(Narcotic effects) - Category 3
Date of printing : 18.05.2020
Date of issue/ Date of : 18.05.2020
revision
Date of previous issue : No previous validation
Version : 1
Notice to reader
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are
often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the
product itself. Minor product variations may be implemented in order to comply with local requirements.
Jotun reserves the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their
needs and specific application practices.

If there is any inconsistency between different language issues of this document, the English (United
Kingdom) version will prevail.

SDS 36903 Jotafix PU Topcoat Comp B Euk GB

Uploaded by

Copyright:

Available Formats

SDS 36903 Jotafix PU Topcoat Comp B Euk GB

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SDS 36903 Jotafix PU Topcoat Comp B Euk GB

Uploaded by

Copyright:

Available Formats

Conforms to Regulation (EC) No. 453/2010 (REACH), Annex II, as amended by Regulation (EU) No.

SAFETY DATA SHEET

Jotafix PU Topcoat Comp B

1.4 Emergency telephone number

SECTION 2: Hazards identification

2.2 Label elements

Signal word : Warning.

SECTION 2: Hazards identification

2.3 Other hazards

SECTION 3: Composition/information on ingredients

SECTION 3: Composition/information on ingredients

SECTION 4: First aid measures

SECTION 4: First aid measures

See toxicological information (Section 11)

SECTION 5: Firefighting measures

5.2 Special hazards arising from the substance or mixture

5.3 Advice for firefighters

SECTION 6: Accidental release measures

SECTION 6: Accidental release measures

6.4 Reference to other : See Section 1 for emergency contact information.

SECTION 7: Handling and storage

7.3 Specific end use(s)

SECTION 8: Exposure controls/personal protection

SECTION 8: Exposure controls/personal protection

SECTION 8: Exposure controls/personal protection

8.2 Exposure controls

SECTION 8: Exposure controls/personal protection

SECTION 9: Physical and chemical properties

9.2 Other information

SECTION 10: Stability and reactivity

SECTION 10: Stability and reactivity

SECTION 11: Toxicological information

SECTION 11: Toxicological information

SECTION 12: Ecological information

12.2 Persistence and degradability

12.3 Bioaccumulative potential

SECTION 12: Ecological information

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Other adverse effects : No known significant effects or critical hazards.

SECTION 13: Disposal considerations

SECTION 13: Disposal considerations

SECTION 14: Transport information

14.4 Packing III III III III

14.7 Transport in bulk : Not applicable.

SECTION 15: Regulatory information

SECTION 15: Regulatory information

Montreal Protocol (Annexes A, B, C, E)

SECTION 16: Other information

SECTION 16: Other information

SECTION 16: Other information

You might also like