Sigma Novaguard 260 Base MSDS
Sigma Novaguard 260 Base MSDS
Sigma Novaguard 260 Base MSDS
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product use : Professional applications, Used by spraying.
Use of the substance/ : Coating.
mixture
4.2 Most important symptoms and effects, both acute and delayed
Potential acute health effects
Eye contact : Causes serious eye damage.
Inhalation : No known significant effects or critical hazards.
Skin contact : Causes skin irritation. Defatting to the skin. May cause an allergic skin reaction.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
pain or irritation
redness
dryness
cracking
blistering may occur
Ingestion : Adverse symptoms may include the following:
stomach pains
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
6.2 Environmental : Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains
precautions and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities.
7.2 Conditions for safe : Storage temperature: 0 to 35°C (32 to 95°F). Store in accordance with local
storage, including any regulations. Store in a segregated and approved area. Store in original container
incompatibilities protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Store locked up.
Eliminate all ignition sources. Separate from oxidizing materials. Keep container
tightly closed and sealed until ready for use. Containers that have been opened must
be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled
containers. Use appropriate containment to avoid environmental contamination. See
Section 10 for incompatible materials before handling or use.
10.3 Possibility of : Under normal conditions of storage and use, hazardous reactions will not occur.
hazardous reactions
10.4 Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition
products.
Refer to protective measures listed in sections 7 and 8.
10.5 Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidising agents, strong alkalis, strong acids.
10.6 Hazardous : Depending on conditions, decomposition products may include the following
decomposition products materials: carbon oxides sulfur oxides metal oxide/oxides
Exposure to component solvent vapour concentrations in excess of the stated occupational exposure limit may result in
adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys,
liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness,
drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with the
mixture may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption
through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage.
Ingestion may cause nausea, diarrhea and vomiting.
This takes into account, where known, delayed and immediate effects and also chronic effects of components from
short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
Based on the properties of the epoxy constituent(s) and considering toxicological data on similar mixtures, this mixture
may be a skin sensitiser and an irritant. It contains low molecular weight epoxy constituents which are irritating to eyes,
mucous membrane and skin. Repeated skin contact may lead to irritation and to sensitisation, possibly with cross-
sensitisation to other epoxies. Skin contact with the mixture and exposure to spray mist and vapour should be avoided.
Contains Phenol, polymer with formaldehyde, glycidyl ether (MW<=700), Octadecanoic acid, 12-hydroxy-, reaction
products with ethylenediamine. May produce an allergic reaction.
Special precautions : This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapour from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
Additional information
ADR/RID : This class 3 viscous liquid is not subject to regulation in packagings up to 450 L according to 2.2.3.
1.5.1.
Tunnel code : (D/E)
ADN : The product is only regulated as an environmentally hazardous substance when transported in
tank vessels. This class 3 viscous liquid is not subject to regulation in packagings up to 450 L
according to 2.2.3.1.5.1.
IMDG : This class 3 viscous liquid is not subject to regulation in packagings up to 30 L according to 2.3.2.5.
IATA : None identified.
14.6 Special precautions for : Transport within user’s premises: always transport in closed containers that are
user upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.
Seveso Directive
This product is controlled under the Seveso Directive.
Danger criteria
Category
P5c: Flammable liquids 2 and 3 not falling under P5a or P5b
6: Flammable (R10)
15.2 Chemical safety : No Chemical Safety Assessment has been carried out.
assessment
Classification Justification
Flam. Liq. 3, H226 On basis of test data
Skin Irrit. 2, H315 Calculation method
Eye Dam. 1, H318 Calculation method
Skin Sens. 1, H317 Calculation method
STOT RE 2, H373 Calculation method
Aquatic Chronic 3, H412 Calculation method
History
Date of issue/ Date of : 2 August 2017
revision
Date of previous issue : 30 November 2016
Prepared by : EHS
Version : 12.04
Disclaimer
The information contained in this data sheet is based on present scientific and technical knowledge. The purpose of this
information is to draw attention to the health and safety aspects concerning the products supplied by us, and to
recommend precautionary measures for the storage and handling of the products. No warranty or guarantee is given in
respect of the properties of the products. No liability can be accepted for any failure to observe the precautionary
measures described in this data sheet or for any misuse of the products.