Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Trailer Signal Kit: Workman HD/HDX/HDX-D Utility Vehicle

    Uploaded by

    Ivan Carrasco

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Trailer Signal Kit: Workman HD/HDX/HDX-D Utility Vehicle

    Uploaded by

    Ivan Carrasco
    20 views1 page

    Original Title

    43849

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views1 page

    Trailer Signal Kit: Workman HD/HDX/HDX-D Utility Vehicle

    Uploaded by

    Ivan Carrasco

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Form No.

    3361-837 Rev A
    Trailer Signal Kit
    Workman® HD/HDX/HDX-D Utility Vehicle
    Model No. 117-4836
    Installation Instructions

    Installing the Trailer Light Wire 7. Start the engine and test the vehicle brake lights,
    ensuring that they work.
    Harness
    8. Connect a trailer to the vehicle, connecting the trailer
    1. Raise the bed and position the safety support on the
    light connector on the vehicle to the one on the
    extended lift cylinder to hold up the bed.
    trailer.
    2. Stop the engine, engage the parking brake, and
    9. Test the brakes, ensuring that the brake lights on the
    remove the key from the ignition.
    trailer work.
    3. Route the wire harness in from the trailer hitch to
    the rear frame tube. Then, separate the two sides of
    the harness, routing each along the bottom of the
    rear frame tube to the openings in the side frame
    rails as shown in Figure 1.
    Important: Ensure that you route the side
    of the harness labeled Left to the left vehicle
    side rail and the side labeled Right to the right
    vehicle side rail.
    1 2

    G010601
    3 4
    Figure 1
    (Many vehicle parts removed for illustrative purposes)
    1. Connectors (left side 3. Trailer light connector
    shown)
    2. Cable ties 4. Wire harness

    4. Locate the connectors in the side rails that connect


    the brake lights to the main vehicle wire harness and
    disconnect them.
    5. Connect the connectors on the trailer light wire
    harness on each side to the main wire harness and
    brake light connectors that you disconnected in step
    4.
    6. Using the 5 cable ties, secure the trailer light wire
    harness to the rear tube in the locations shown in
    Figure 1.

    © 2009—The Toro® Company Register at www.Toro.com. Original Instructions (EN)


    8111 Lyndale Avenue South Printed in the USA.
    Bloomington, MN 55420 All Rights Reserved

    You might also like