HELMS - Keyfield Helms-6
HELMS - Keyfield Helms-6
HELMS - Keyfield Helms-6
The Keyfield Helms is a The BV-classed Keyfield Helms is the perfect solution to undertake
dedicated DP2 Geotechnical geotechnical survey drilling operation in support of the following
Survey Vessel equipped with a activities:
proven heave compensated
single mast drilling rig mounted
▪ Geotechnical investigation for windfarm foundation design and
analysis
over a 3.5m by 3.5m centred
moonpool at midship. ▪ Geotechnical survey for offshore hydrocarbon exploration and
development
The vessel offers a range of ▪ Shallow gas investigation including very deep pilot holes
drilling, sampling, coring and
insitu testing services via its
▪ Geohazard survey for exploration Jackups emplacement
HG30 Drilling Rig rated to a ▪ Submarine cable and pipeline route survey
maximum load of 30 tons
equipped with Dando 1000 top
drive power swivel.
DP System
Type Kongsberg K-POS DP-21
Independent Joystick Kongsberg C-JOY
Reference System 2 x DP Controller, 2 x Wind Sensor,
3 x Master Gyro, 1 x HIPAP 500,
2 x DGPS, Power Management
System, VRS
Geotechnical c ap abiliti es
Drilling System
Derrick Height 26m
Draw works Pull Master M50
Top drive Dando 1000
Heave compensation 3m stroke
Mud pumps 1 x GASO 2050 Duplex
Mud tanks 1 x 6,000 litres
1 x 3,000 litres
Drill string 5m ea at 5” API & AA with 4” ID
Seabed Frame 8 tonnes