Catalogo Victaulic Pl2022 A Gen

GENERAL GENERAL
PRICE LIST PRICE LIST
GENERAL PRICE LIST

PL2022-A-GEN
Effective June 24, 2022
Effective June 24, 2022

U.S./WorldHeadquarters EMEAI Asia Pacific
4901 Kesslersville Road Prijkelstraat 36 Unit 808, Building B
Easton, PA 18040 USA 9810 Nazareth, Belgium Hongwell International Plaza
No.1602 West Zhongshan Road
victauliclocations.com Shanghai, China 200235
PL2022-A-GEN 18581 REV A 06/2022

Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or
its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their
respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or
utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.
© 2022 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
Terms and Conditions of Sale
1.0 TERMS AND CONDITIONS OF SALE

CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the
alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on invoice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $500 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders (excluding No. 26/No. W26 Outlet Fittings, No. 826 Steam Outlet
Fittings, Series 387 Inline/Series 388 End Suction Pump Skids, Customer Specified Flat Beds, Style W257 Dynamic Movement Joints, Bend Elbows – 3D/5D/6D,
Victaulic Bolted Split-Sleeve Products and Victaulic Vortex™ Products) having a net price value of $15000 and over for shipment at one time to one destination into
distributor stock or direct ship to a project, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $15000, F.O.B. shipping point (our option) will be paid by the customer. The most economical
routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer,
and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil
disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the requested ship date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall
Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or
liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard
(i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the
right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and
without incurring obligation. For further information contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the
Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods
Around the world and across diverse business lines, Victaulic provides durable pipe joining solutions that are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have
transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
solve the construction industry’s toughest challenges.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
Since 1919, Victaulic’s innovative piping products and design services continue to increase construction productivity and
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment
reduce risk, ensuring projects are completed safely, on time and within budget. without notice and without incurring obligation.
With more than 40 international facilities, Victaulic helps customers in 140 countries succeed in the 2.0 LIMITED WARRANTY
Warranty, Victaulic Contact Information
global construction industry. What is Covered: This warranty covers any defects in materials or workmanship in products sold by Victaulic occurring under normal
conditions of use and service with the exceptions stated below.
How Long Coverage Lasts: This warranty runs for one year from the date of delivery to the original buyer.
FIRE PROTECTION | HVAC | PLUMBING | OIL & GAS | MINING | WATER & WASTEWATER | POWER GENERATION | MARITIME
What is Not Covered: This warranty shall not apply to any product which has been subject to misuse, negligence, or accident (such as, without limitation,
exposure to incompatible chemical or corrosive agents including microbial corrosion), which has been repaired or altered in any manner outside of Victaulic’s factory,
or which has been used in a manner contrary to Victaulic’s instructions or recommendations. This warranty shall not apply to any Victaulic products utilizing
proprietary grooves (such as, but not limited to, the Victaulic AGS™, IGS™, or PGS-300™ grooves) which have been used on pipe that has been grooved to ANSI/AWWA
C-606 standards or which was grooved using tools not supplied by Victaulic or its licensees. Victaulic shall not be responsible for design errors due to
inaccurate or incomplete information supplied by Buyer or its representatives.
What Victaulic will do: Victaulic will repair or replace, at its option, any product that proves to be defective in materials or workmanship following an examination by
Victaulic that shows to its satisfaction the product was defective in materials or workmanship.
THIS LIMITED WARRANTY IS EXCLUSIVE AND MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of products.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
victaulic.com How to Get Service: Contact Victaulic at 610-559-3300 within one year after delivery to the original buyer to arrange for an examination of the product. You will be
asked to ship the product to Victaulic’s factory, postage and transportation charges prepaid, for examination. There is no charge for examination. Victaulic will examine
the product and contact you within a reasonable time regarding the results of that examination and to arrange for repair or replacement of any product determined
Source: skyscrapercenter.com and the Council on Tall Buildings and Urban Habitat
to be defective in materials or workmanship.
EFFECTIVE JULY 1, 2022
Index
SECTION 1 – Couplings and Fittings Style DLY

Style 107V Delta-Y Assembly
QuickVic™ Rigid Coupling Styles 647-GT, 647-TT, 647-GG
Style 107N Dielectric Transition Fittings
QuickVic™ Rigid Coupling SECTION 2 – Equipment Modules
Style 07 Series 381/381G
Zero-Flex™ Rigid Coupling Suction Inlet Vibration Isolation Pump Drop
Style L07
Rigid Coupling Series 382/382G
Style W07 Strainer Inlet Vibration Isolation Pump Drop
AGS Rigid Coupling Series 380/380G
Style LW07 Discharge Outlet Vibration Isolation Pump Drop
AGS Rigid Coupling Series 383/383G
Style 177N Discharge CBV Outlet Vibration Isolation Pump Drop
QuickVic Flexible Coupling Series 387
Style 77 Inline Modular Dual Pump Skid
Flexible Coupling Series 388
Style L77 End Suction Modular Dual Pump Skid
Flexible Coupling Nos. R10, R11 and R12
Style W77 Rigid OGS Carbon Steel Long Run Fittings
AGS Flexible Coupling Nos. R20, R21 and R22
Style 75 Flexible OGS Carbon Steel Long Run Fittings
Flexible Coupling Nos. WR10, WR11 and WR12
Style 750 Rigid AGS Carbon Steel Long Run Fittings
Reducing Coupling Nos. WR20, WR21 and WR22
Style 875 Flexible AGS Carbon Steel Long Run Fittings
Reducing Coupling for Potable Water Applications No. 26
Style 741 Outlet Fitting
Vic-Flange Adapter Style 929
Style 841 Isolation Outlet
Vic-Flange Adapter for Potable Water Applications Style 929D (Dielectric)
Style W741 Isolation Outlet
AGS Vic-Flange Adapter Style 429
Vic-Flange Adapter Style 629
Outlet Coupling No. 156
Style 78 Mining Header
Snap-Joint™ Coupling Series 385
Style HP-70 Vibration Isolation Air Handling Unit Drops
High Pressure Rigid Coupling Series 386
Style HP-70ES Pressure Reducing Valve (PRV) Stations
High Pressure EndSeal™ Coupling Series 386-SB
Style 808 Single Branch Pressure Reducing Valve (PRV) Stations
High Pressure Coupling for Ring Systems Series 386-V
Style 809N Vertical Pressure Reducing Valve (PRV) Station
High Pressure Coupling for Ring Systems SECTION 3 – Hole Cut Products
Style 307 Style 920/920N
Ductile Iron to IPS Transition Coupling Mechanical-T Outlet
Style 171 Style L920N
Composite Flexible Coupling Mechanical-T Outlet
Style 807N Style 920/920N
QuickVic Rigid Coupling for Potable Water Applications Mechanical-T Cross
Style 877N Style 923
QuickVic Flexible Coupling for Potable Water Applications Strapless Outlet
QuickVic™ Fittings Style 924
Grooved End Fittings Strapless Thermometer Outlet
AGS (Advanced Groove System) Vic-Tap II
Grooved End Fittings Hot Tap
Extra Heavy “ES” SECTION 4 – Valves and Specialties
EndSeal Fittings Series 761 Vic-300 MasterSeal™
XL Butterfly Valve
Couplings and Fittings Series W761 Vic-300 (300 psi)
AGS Butterfly Valve
VICTAULIC.COM PL2022-A-GEN I
Index
Series W719 Series 968-F-SS

AGS Butterfly Valve Stainless Steel Strainer
Series 706 (300 psi) Series 969-F
Large Diameter High Pressure Butterfly Valve High Pressure Strainer
Series 700 Style 150
Butterfly Valve Mover Expansion Joint
Vic-Ball Valve Expansion Joint
Series 726 Style 155P
Grooved End Ball Valve Expansion Joint for Potable Water Applications
Ball Valve Dynamic Movement Joint
Series 722 Style W257
Brass Body Ball Valve – Threaded Dynamic Movement Joint
Series 722L No. A10
Low Lead Brass Body Ball Valve Carbon Steel Riser Anchor
Series 713 No. A20
Swing Check Valve Carbon Steel Heavy Riser Anchor
Series 716H No. A40
High Pressure Vic-Check™ Valve Carbon Steel Riser Anchor for Tight Spaces
Series 716 No. A81
Vic-Check Valve Horizontal Pipe Clamp Anchor
Series 779 No. A82
Venturi Check Valve Horizontal Pipe Clamp Anchor
Series W715 No. A83
AGS Vic-Check Double Disc Valve Horizontal Pipe Clamp Anchor
Series 377 No. A84
Vic-Plug Valve Horizontal Pipe Clamp Anchor
Series 318 No. WA20
Sump Ejector Kit AGS Carbon Steel Heavy Riser Anchor
Series 725T No. A190
Diverter Valve Carbon Steel Riser Movement Fitting
Series 725S No. A191
Diverter Valve Carbon Steel Anchor Outlet Fitting
Series 771M SECTION 5 – Hydraulic Control Valves
OS&Y Gate Valve Victaulic Series 972/Bermad Model BC-720-P
Series 371 Pressure Reducing Valve
OS&Y Gate Valve Victaulic Series 972-SS/Bermad Model BC-720-P-SS
Series W371 Pressure Reducing Valve
AGS OS&Y Gate Valve Victaulic Series 972-PD/Bermad Model BC-720-PD-P
Series 372 Proportional Pressure Reducing Valve
NRS Gate Valve Victaulic Series 972-PD-SS/Bermad Model BC-720-PD-SS
Series W372 Proportional Pressure Reducing Valve
AGS NRS Gate Valve Victaulic Series 982-PP/Bermad Model BC-820-PP-P
Series 795 High Pressure Proportional Pressure Reducing Valve
Knife Gate Valve Victaulic Series 973-Q/Bermad Model BC-73Q-P
Series 731-D Pressure Relief Valve
Suction Diffuser Victaulic Series 973-QHP/Bermad Model BC-73Q-P
Series W731-D Pressure Relief Valve
AGS Suction Diffuser Victaulic Series 979-4/Bermad Model BC-794-P
Series 730 Excessive Pressure Shut Off Valve
Vic-Strainer Tee Type Victaulic Series 979-4-SS/Bermad Model BC-794-P-SS
Series W730 Excessive Pressure Shut Off Valve
AGS Vic-Strainer Tee Type Victaulic Series 972S-H/Bermad Model BC-72S-H-P
Series 732 Pressure Reducing System with “Watchdog” Hydraulic
Vic-Strainer Wye Type Strainer Backup Valve
Series W732 Victaulic Series 972S-2B-H/Bermad Model BC-72S-2B-H-P
Vic-Strainer Wye Type Watchdog PRV Combo with Integrated Low-Flow Bypass
Series 968-F Victaulic Series 970-N/Bermad Model BC-720N-P
Strainer Check Valve
II VICTAULIC.COM PL2022-A-GEN
Index
Victaulic Series 973/Bermad Model BC-730-P Series 76T

Pressure Relief/Sustaining Valve Automatic Balancing Valve – Fem x Fem Threaded
Victaulic Series 973-HP/Bermad Model BC-730-P Series 76B
Pressure Relief/Sustaining Valve Automatic Balancing Valve – Fem x Fem Threaded with Ball
Victaulic Series 971/Bermad Model BC-710-P Valve Kit
Solenoid Control Valve On/Off Series 76K
Victaulic Series 972-55/Bermad Model BC-720-55-P Automatic Balancing Valve – Male x Fem Threaded
Pressure Reducing Valve with Solenoid Control Series 76V
Victaulic Series 972-2B/Bermad Model BC-720-2B-P Automatic Balancing Valve – Male x Fem Threaded with Ball
Pressure Reducing Valve with Integral Low-Flow Bypass Valve Kit
Victaulic Series 972-2B-SS/Bermad Model BC-720-2B-P-SS Series 76G
Pressure Reducing Valve with Integral Low-Flow Bypass Automatic Balancing Valve – Grooved
Victaulic Series 975-82/Bermad Model BC-750-82 Series 76T
Level Control Valve with Modulating Altitude Pilot Automatic Balancing Valve Accessories
Victaulic Series 975-67/Bermad Model BC-750-67-P Automatic Balancing Valve Cartridges
Level Control Valve with Modulating Vertical Float TA Series TC
Victaulic Series 935-H/Bermad Model BC-CAP-P On/Off Control
Direct Acting Pressure Reducing Valve TA Series TCM
Victaulic Series 970/Bermad Series 700 Modulating Control
Hydraulic Control Valve TA Series 7CP
Victaulic Series 980/Bermad Series 800 Compact Pressure Independent Balancing and Control Valve
Hydraulic Control Valve TA Series 7MP
Hydraulic Control Valves Compact Pressure Independent Balancing and Control Valve
Spare Parts TA Series 76W
SECTION 6 – Air Valves 6-Way Valve
Victaulic Series 9A7/Bermad Model A71 Series 76X
Air Release Valve ICSS – Low Lead Balancing Valve
Victaulic Series 9C3/Bermad Model C30 TA Series 7FP
Air Release Valve Pressure Independent Combination Balancing and Control
Valve
Victaulic Series 9C7/Bermad Model A70
Combination Air Valve Standard KOIL-KIT™ Coil Packs
Victaulic Series 9C5-P/Bermad Model C50-P Series 79C/79D
Combination Air Valve KOIL-KIT™ Coil Packs
Victaulic Series 9C5-N-N/Bermad Model C50-N-N Style 925
Combination Air Valve Drain/Air Vent Assembly
Victaulic Series 9C5/Bermad Model C50 Accessories KOIL-KIT™ Coil Pack Components
SECTION 7 – Hydronic Balancing Products TA Series 793
Differential Pressure Controller – Female Threaded End
TA Series 786H
Manual Balancing Valve – STAS – Solder End TA Series 794
Differential Pressure Controller – Flanged End
TA Series 787H
Manual Balancing Valve – STAD – NPT (Fem.) End TA Series 782
Bypass Valve
Series 78KH
Manual Balancing Valve – STADK TA Series 7PR
Differential Pressure Controller – Flanged End
TA Series 788
Manual Balancing Valve – STAF – Flanged End TA Series 7DA
Compact Differential Pressure Controller
TA Series 789
Manual Balancing Valve – STAG – Grooved End Pressure Reducing Kits
TA Series 790 Differential Pressure Controller
Balancing Valve for Potable Water Applications Accessories
TA Series 7TZ Dongle for Slider Actuators
Therm Zero Valve for Potable Water Applications TA Series 736
TA Series 78BL TA Link Differential Pressure Sensor
Low Lead Manual Balancing Ball Valve Universal Gauge Meter
TA Series 786H and 787H Conversion Kit
Insulation Kits TA Series 734
TA Series 788 and 789 Scope Balancing Instrument
Insulation Kits SECTION 8 – Plain End Products
Kit 786H Style 99
Drain Kit Roust-A-Bout Coupling
Spare Parts Adapter Nipples
VICTAULIC.COM PL2022-A-GEN III

Index
Plain End Fittings Style 622

QuickVic™ SD Installation-Ready™ System Mechanical-T Cross Assembly for Copper Tubing
SECTION 9 – Vic-Press™ System for Style 641
Schedule 10S Stainless Steel Pipe Vic-Flange Adapter for Copper Tubing
Vic-Press – Press System for Grooved End Fittings for Copper Tubing
Schedule 10S, Type 304 Stainless Steel Piping Series 608N
Vic-Press – Press System for Butterfly Valve for Copper
Schedule 10S, Type 316 Stainless Steel Piping GDC-CTS Go/No-Go
SECTION 10 – HDPE Products Groove Diameter Cable
Style 905 SECTION 13 – Aluminum Products
Coupling for Plain End HDPE Pipe Style 77A
Style 907 and Style W907 Flexible Coupling for Aluminum Pipe
Transition Coupling for HDPE-to-Steel Pipe Style 78A
Style 2971 Snap-Joint Coupling for Aluminum Pipe
Aquamine™ Transition Coupling for PVC to HDPE Pipe Grooved End
Style 908 Aluminum Fittings
Coupling for Double Grooved HDPE Pipe SECTION 14 – Stainless Steel Products
Style 904 Style 89
Flange Adapter for HDPE-to-Flanged Pipe Rigid Coupling for Stainless Steel
Style 926 Style 889
Mechanical-T Spigot Outlet Rigid Coupling for Potable Water Applications
Plain End HDPE Fittings Style W89
Style 995N AGS Rigid Coupling
HDPE Coupling Style 489
Style 997 Rigid Stainless Steel Coupling – CF8M
HDPE-to-Steel Transition Coupling Style W489
Style 994 AGS Stainless Steel Rigid Coupling
HDPE Flange Adapter Style 489DX
HDPE Plain End Fittings Rigid Stainless Steel Coupling – CE8MN
Knife Gate Valve for Plain End HDPE Pipe Flexible Stainless Steel Coupling – CF8M
Model CG3100/3300/3500 Style 475DX
Cut Grooving Tool for HDPE Pipe Flexible Stainless Steel Coupling – CE8MN
SECTION 11 – CPVC Products Style 77DX
Flexible Stainless Steel Coupling – CE8MN
Style 356
Installation-Ready Transition Coupling Style 77S
Flexible Stainless Steel Coupling
Style 357
Installation-Ready Rigid Coupling Style 441
Stainless Steel Vic-Flange Adapter
Style 358
Reducing Coupling No. 445F and No. 445R
Stainless Steel Flange Adapter Nipple
Style 856
Installation-ReadyTransition Coupling for Style 422
Potable Water Applications Stainless Steel Mechanical-T Bolted Branch Outlet
Style 857 No. A10S
Installation-Ready Rigid Coupling for Stainless Steel Riser Anchor
Potable Water Applications No. A40S
Style 858 Stainless Steel Riser Anchor for Tight Spaces
Reducing Coupling for Potable Water Applications Standard Schedule 10S Type 304L and Type 316L
PGS-300 Grooved End Fittings Stainless Steel Fittings
Style 355 Standard Schedule 40S Type 304L and Type 316L
Expansion Joint Stainless Steel Fittings
Style 355P Standard Schedule 40S Type 316
Expansion Joint for Potable Water Applications Stainless Steel Fittings
SECTION 12 – Copper Connection Series 461
Vic-300 MasterSeal™ Stainless Steel Butterfly Valve
Style 607
QuickVic Rigid Coupling for Copper Tubing Series 861
Vic-300 MasterSeal™ Stainless Steel Butterfly Valve for
Style 644
Potable Water Applications
Installation-Ready Transition Coupling
Series 726S
Style 622
Stainless Steel Grooved End Ball Valve
Mechanical-T Bolted Branch Outlet for Copper Tubing
Series 712S
Stainless Steel Swing Check Valve
IV VICTAULIC.COM PL2022-A-GEN
Index
Series 416 VE270FSD

Stainless Steel Check Valve Field Roll Grooving Tool
Series 816 VE416FS
Stainless Steel Check Valve for Potable Water Applications Field Roll Grooving Tool
SECTION 15 – Steam and Condensate Products VE416FSD/417FSD
Style 870 Field Roll Grooving Tool
Rigid Coupling VE450FSD
Series 871 Field/Shop Roll Grooving Tool
Gate Valve VE268
Series 871R Shop Fabrication Grooving Tool
Modular Gate Valve VE414MC
Series 159 Shop Fabrication Grooving Tool
Flexible Loop VE460
Carbon Steel OGS-200 Grooved End Fittings Shop Fabrication Grooving Tool
Stainless Steel OGS-200 Grooved End Fittings 50T
Shop Fabrication Grooving Tool
No. 826
Steam Outlet Fitting RG5200i
Automated Production Roll Grooving Tool
Nos. 891C, 891H, 892C and 892H
Steam and Condensate In-Line Drip Leg Fittings Victaulic Fabrication Cell
Nos. 893C, 893H, 894C and 894H VAPS 112
Steam and Condensate Riser Drip Leg Fittings Pipe Stand
RG1200 VAPS 224
OGS-200 Roll Grooving Tool Pipe Stand
RG1210 VAPS 1672
OGS-200 Roll Grooving Tool Pipe Stand
OGS-200 Carbon Steel Grooving Rolls VE436MC
Quick Change Slide Conversion Kit
OGS-200 Stainless Steel Grooving Rolls
VG28GD
Go/No Go Groove Tape Gear Drive Cut Grooving Tool
SECTION 16 – Large Diameter AGS Vic-Ring Systems
VG28GD-ABR
Style W07 Gear Drive Cut Grooving Tool for Abrasive Services
AGS Rigid Coupling for AGS Vic-Ring System
VDG26GD
Style W77 Gear Drive Double Groove Cut Grooving Tool
AGS Flexible Coupling for AGS Vic-Ring System
VDG26GD-COR
SECTION 17 – Pipe Preparation Tools Gear Drive Cut Grooving Tool for Abrasion and Corrosion
VE12 Services
Groove-In-Place VG824
VE26 S/C/SS/P Cut Grooving Tool
Groove-In-Place VG824-ABR
VE26/VE46 Cut Grooving Tool for Abrasive Services
Power Drive Kit VG824-COR
VE46/P Cut Grooving Tool for Corrosion Services
Groove-In-Place VG824DG
RG1200 Double Groove Cut Grooving Tool
OGS-200 Roll Grooving Tool VG828
RG1210 AGS Cut Grooving Tool
OGS-200 Roll Grooving Tool VG412
VE226 B/S/M/C/BSS/MSS/P Orbital Grooving Tool
Portable Groover CG1100
VE226 Cut Grooving Tool for CPVC/PVC Plastic Pipe
Power Drive Kit VPG 824
VE106 Cut Grooving Tool for PVC Plastic Pipe
Groove-N-Go CG3300/3500
VE206 Cut Grooving Tool for HDPE Pipe
Field Roll Grooving Tool Style 926
RG3212 Spigot Hole Saw for HDPE Pipe
Field Roll Grooving Tool VHCT 900
VE272SFS Hole Cutting Tool
Field Roll Grooving Tool HCT908
Hole Cutting Tool
VICTAULIC.COM PL2022-A-GEN V
Index
Vic-Tap II
Hot Tap
VCT1
Cut Off Tool - Manual
VCT2
Cut Off Tool - Automatic
PC3110
Cut and Mark Tool with Chamfering Feature
PFT510
Vic-Press Tool for Schedule 10S Stainless Steel Pipe
Power Mule
External Power Source
PT-100 Go/No-Go
Grooved Pipe Diameter Tape
PT-102 AGS Go/No-Go
Grooved Pipe Diameter Tape
GDC-CTS Go/No-Go
Groove Diameter Cable
GDC-PGS-300 Go/No-Go
Groove Diameter Cable
Tool Carry Bag
VG
Cut Grooving Tool
No. T-60
Test Cap Kit
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
Submitted By:___________________________________ Date:___________________________________
Approved By:____________________________________ Date:___________________________________
VI VICTAULIC.COM PL2022-A-GEN
Table of Contents
SECTION 1 – Couplings and Fittings No. 12 – 22½°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31
Style 107V QuickVic™ Rigid Coupling. . . . . . . . . . . . . . . . . . . 1-2 No. 13 – 11¼°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31
Style 107N QuickVic™ Rigid Coupling. . . . . . . . . . . . . . . . . . . 1-3 No. W12 – AGS 22½° . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31
Style 807N QuickVic™ Installation-Ready™ Rigid Coupling No. W13 – AGS 11¼° . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-31
for Potable Water Applications. . . . . . . . . . . . . . . . . . . . . 1-4 No. 100 and No. 110 1½ D Long Radius Elbows. . . . . . . 1-32
Style 07 Zero-Flex™ Rigid Coupling . . . . . . . . . . . . . . . . . . . . 1-4 No. L100 and L110 Carbon Steel Long Radius Elbows. . . 1-32
Style L07 Carbon Steel Rigid Coupling. . . . . . . . . . . . . . . . . . . 1-5 No. W100 and W110 1½ D AGS Long Radius Elbow . . . . 1-33
Style W07 AGS Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . 1-6 No. LW100 and LW110 Carbon Steel AGS Long Radius
Style LW07 AGS Carbon Steel Rigid Coupling . . . . . . . . . . . . . 1-7 Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-33
Style 177N QuickVic™ Flexible Coupling for Steel. . . . . . . . . . 1-8 No. R-10G and No. R-10F Reducing Base Support
Style 877N QuickVic™ Installation-Ready™ Flexible Coupling Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34
for Potable Water Applications. . . . . . . . . . . . . . . . . . . . . 1-8 No. 100F & No. 100G Base Support Elbow. . . . . . . . . . . 1-34
Style 77 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 No. R100F & No. R100G Reducing Base Support Elbow. 1-35
Style L77 Carbon Steel Flexible Coupling. . . . . . . . . . . . . . . . 1-10 No. 10-DR Drain Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 1-35
Styles W77/W77B AGS Flexible Coupling . . . . . . . . . . . . . . . 1-11 No. V20 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-35
Style 75 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 No. 20 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-36
Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 1-14 No. 29M Tee with Threaded Branch. . . . . . . . . . . . . . . . . . . 1-36
Style 875 Reducing Coupling for Potable Water Applications. 1-14 No. L20 Tee Carbon Steel Tee. . . . . . . . . . . . . . . . . . . . . . . 1-36
Style 741 Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . 1-15 No. W20 AGS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-37
Style 841 Vic-Flange Adapter for Potable Water Applications. 1-15 No. LW20 AGS Carbon Steel Tee. . . . . . . . . . . . . . . . . . . . . . 1-37
Style W741 AGS Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . 1-16 No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38
Style 743 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 1-16 No. 33 True Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38
Style 72 Outlet Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18 No. W35 AGS Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38
Style 78 Snap-Joint™ Coupling. . . . . . . . . . . . . . . . . . . . . . . 1-18 No. W33 AGS True Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38
Style HP-70 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 No(s). 40, 42, and 43 Adapter Nipples. . . . . . . . . . . . . . . . . 1-39
Style HP-70ES Coupling with “ES” Gasket. . . . . . . . . . . . . . . 1-19 No(s). W42, W43 and W49 AGS Adapter Nipples . . . . . . . . . 1-39
Style 808 High Pressure Coupling. . . . . . . . . . . . . . . . . . . . . 1-20 No. 80 Female Threaded Adapter. . . . . . . . . . . . . . . . . . . . . 1-40
Style 809N High-Pressure Coupling for Ring Systems. . . . . . 1-20 No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . . 1-40
Style 307 Ductile Iron to IPS Transition Coupling. . . . . . . . . . 1-21 No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . 1-41
Style 171 Composite Flexible Coupling . . . . . . . . . . . . . . . . . 1-21 No. L25 Carbon Steel Reducing Tee. . . . . . . . . . . . . . . . . . . 1-43
Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22 No. W25 AGS Grooved Reducing Tee. . . . . . . . . . . . . . . . . . 1-44
Gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22 No. LW25 AGS Carbon Steel Reducing Tee. . . . . . . . . . . . . . 1-47
Flange Parts – Styles 741, 841, W741, 743 and 441. . . . . . . 1-25 No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . 1-48
Flange Gaskets – Styles 741, 841, W741, 743 and 441. . . . . 1-25 No. 50 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . 1-50
Style 72 Outlet Coupling Gaskets. . . . . . . . . . . . . . . . . . . . . . 1-26 No. 51 Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-50
Metal Liners – Styles 77, 75 and 78 Couplings . . . . . . . . . . . 1-26 No. L50 Carbon Steel Concentric Reducer . . . . . . . . . . . . . . 1-51
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . 1-27 No. L51 Carbon Steel Eccentric Reducer . . . . . . . . . . . . . . . 1-51
Style 107V QuickVic™ Rigid Coupling Bolts and Nuts. . . . . . 1-27 No. W50 AGS Concentric Reducer. . . . . . . . . . . . . . . . . . . . 1-52
Installation-Ready™ Bolts and Nuts . . . . . . . . . . . . . . . . . . . 1-27 No. W51 AGS Eccentric Reducer . . . . . . . . . . . . . . . . . . . . . 1-52
Go/No-Go Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28 No. LW50 AGS Carbon Steel Concentric Reducer. . . . . . . . . 1-55
Pressure Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28 No. LW51 AGS Carbon Steel Eccentric Reducer . . . . . . . . . . 1-55
Elbows – No.(s) 53, 54 and 55 Swaged Nipples. . . . . . . . . . . . . . . . . . 1-56
No. V10 – 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. 52 – Reducer Threaded Small End. . . . . . . . . . . . . . . . . 1-57
No. V11 – 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. L52 – Carbon Steel Reducer – Female Threaded . . . . . . 1-57
No. 10 – 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. 30 Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-58
No. 11 – 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29 No. W30 AGS Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-58
No. V15F ANSI Class 150 Flanged Elbow (Flat Face). . . . 1-30 No. 60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59
No. V15R ANSI Class 150 Flanged Elbow (Raised Face). 1-30 No. L60 Carbon Steel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . 1-59
No. V16F ANSI Class 300 Flanged Elbow (Flat Face). . . . 1-30 No. W60 AGS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-60
No. V16R ANSI Class 300 Flanged Elbow (Raised Face). 1-30 No. LW60 AGS Carbon Steel Cap . . . . . . . . . . . . . . . . . . . . . 1-60
No. W10 – AGS 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 No. 30R Reducing Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-61
No. W11 – AGS 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30 No. W30R AGS Reducing Lateral . . . . . . . . . . . . . . . . . . . . . 1-62
VICTAULIC.COM PL2022-A-GEN VII

Table of Contents
No. 32 Tee Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63 Style 429 Isolation Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
No. 61 Bull Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-63 Style 629 Isolation Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
No. 48 Hose Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-64 Style 156 Mining Header. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
No(s). 45 and 46 Flanged Adapter Nipples. . . . . . . . . . . . . . 1-64 Series 387 Inline Modular Dual Pump Skid. . . . . . . . . . . . . . 2-14
No. L45R and No. L46R Carbon Steel Flanged Series 388 End Suction Modular Dual Pump Skid. . . . . . . . . 2-14
Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-65 Rigid OGS Carbon Steel Long Run Fittings . . . . . . . . . . . . . . 2-15
No. W45R AGS Flanged Adapter Nipple . . . . . . . . . . . . . . . . 1-66 Flexible OGS Carbon Steel Long Run Fittings . . . . . . . . . . . . 2-16
No. LW45R Carbon Steel AGS Flanged Adapter Nipple. . . . . 1-66 Rigid AGS Carbon Steel Long Run Fittings. . . . . . . . . . . . . . .2-16
No. 36 VicBlast Nozzle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-67 Flexible AGS Carbon Steel Long Run Fittings. . . . . . . . . . . . . 2-17
3D Cast Bends for Abrasive Services. . . . . . . . . . . . . . . . . . 1-67 Series 385 Vibration Isolation Air Handling Unit Drops . . . . . 2-18
Long Radius Bend – 3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-68 Series 386 Pressure Reducing Valve (PRV) Stations . . . . . . . 2-22
Long Radius Bends – 5D . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-69 Series 386-SB Single Branch Pressure Reducing
Long Radius Bends – 6D . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-70 Valve (PRV) Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Schedule 80 3D Long Radius Elbows Series 386-V Vertical Pressure Reducing Valve (PRV)
No. 100-3D 90° Long Radiu Elbow. . . . . . . . . . . . . . . . . 1-71 Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25
No. 110-3D 45° Long Radius Elbow. . . . . . . . . . . . . . . . . 1-71 SECTION 3 – Hole Cut Products
XL Fittings and Couplings Styles 920/920N Female Threaded Mechanical-T Outlet. . . . . 3-2
Style XL100/XL77/XL79 90° – Style L920N Female Threaded Mechanical-T Outlet. . . . . . . . 3-3
1½D Elbows and Couplings . . . . . . . . . . . . . . . . . . . 1-72 Styles 920/920N Grooved Mechanical-T Outlet. . . . . . . . . . . . 3-4
Style XL110/XL77/XL79 45° – Styles 920/920N Mechanical-T Cross. . . . . . . . . . . . . . . . . . . 3-5
1½D Elbows and Couplings . . . . . . . . . . . . . . . . . . . 1-72 Style 923 Strapless Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Style XL100/XL77/XL79 90° – Style 924 Strapless Thermometer Outlet. . . . . . . . . . . . . . . . . 3-8
3D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . 1-73
Vic-Tap II Hot Tap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Style XL110/XL77/XL79 45° –
3D Elbows and Couplings. . . . . . . . . . . . . . . . . . . . . 1-73 SECTION 4 – Valves and Specialties
Style XL100/XL110 90° and 45° 1½D Elbows . . . . . . . . . 1-74 Series 761 Vic-300 MasterSeal™ Butterfly Valve . . . . . . . . . . 4-2
Style XL100/XL110 90° and 45° 3D Elbows. . . . . . . . . . . 1-74 Series W761 Vic-300 (14 – 24”) 300 psi AGS Butterfly Valve. 4-4
Style XL77/XL79 Couplings . . . . . . . . . . . . . . . . . . . . . . . 1-75 Series W719 AGS Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . 4-4
Style DLY Delta-Y Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 1-75 Series 706 (14 – 24”) 300 psi Butterfly Valve. . . . . . . . . . . . . 4-5
No. 30 DY Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-75 Series 700 Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Extra Heavy “ES” Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-76 Series 721 Grooved End Ball Valve. . . . . . . . . . . . . . . . . . . . . 4-6
Carbon Steel or Stainless Steel (IPS) to Series 726 Grooved End Ball Valve. . . . . . . . . . . . . . . . . . . . . 4-7
Copper (CTS) Dielectric Fittings Series 727 1500 psi Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . 4-8
Style 647-GT – Groove x Thread . . . . . . . . . . . . . . . . . . . 1-76 Series 722 Threaded Brass Ball Valve. . . . . . . . . . . . . . . . . . . 4-8
Style 647-TT – Thread x Thread. . . . . . . . . . . . . . . . . . . . 1-76 Series 722L – Low Lead Ball Valve . . . . . . . . . . . . . . . . . . . . . 4-9
Style 647-GG – Groove x Groove . . . . . . . . . . . . . . . . . . . 1-77 Optional Handle Extensions for Series 722 and
SECTION 2 – Equipment Modules Series 722L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Series 381 Suction Inlet Vibration Isolation Pump Drop. . . . . . 2-2 Series 713 High Pressure Check Valve . . . . . . . . . . . . . . . . . . 4-9
Series 381G Suction Inlet Vibration Isolation Pump Drop – Series 716H/716 Vic-Check Valve. . . . . . . . . . . . . . . . . . . . . 4-10
Original Groove System (OGS) End Connection. . . . . . . . . 2-3 Series 779 Venturi Check Valve. . . . . . . . . . . . . . . . . . . . . . . 4-11
Series 382 Strainer Inlet Vibration Isolation Pump Drop. . . . . . 2-4 Series W715 AGS Vic-Check Valve . . . . . . . . . . . . . . . . . . . . 4-11
Series 382G Strainer Inlet Vibration Isolation Pump Drop – Series 377 Balancing Plug Valve. . . . . . . . . . . . . . . . . . . . . . 4-12
Original Groove System (OGS) End Connection. . . . . . . . . 2-5 Series 318 Sump Ejector Kit. . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Series 380 Discharge Outlet Vibration Isolation Pump Drop. . . 2-6 Series 725T Diverter Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Series 380G Discharge Outlet Vibration Isolation Pump Drop – Series 725S Diverter Valve . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Original Groove System (OGS) End Connection. . . . . . . . . 2-7 Series 771M OS&Y Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . 4-14
Series 383 Discharge CBV Outlet Vibration Isolation Series 371 OS&Y Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Pump Drop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Series W371 OS&Y Gate Valve . . . . . . . . . . . . . . . . . . . . . . . 4-15
Series 383G Discharge CBV Outlet Vibration Isolation
Pump Drop – Original Groove System (OGS) Series 372 NRS Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
End Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Series W372 NRS Gate Valve . . . . . . . . . . . . . . . . . . . . . . . . 4-15
No. 26/W26 Outlet Fitting. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 Series 906 Knife Gate Valve . . . . . . . . . . . . . . . . . . . . . . . . . 4-16
Style 929 Isolation Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Series 795 Knife Gate Valve . . . . . . . . . . . . . . . . . . . . . . . . . 4-17
Style 929D Isolation Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Series 7340 Grooved End Metering Station – Orifice Type. . . 4-18
VIII VICTAULIC.COM PL2022-A-GEN

Table of Contents
Series 731-D Suction Diffuser. . . . . . . . . . . . . . . . . . . . . . . . 4-19 Victaulic Series 973-HP/Bermad Model BC-730-P
Series W731-D AGS Suction Diffuser. . . . . . . . . . . . . . . . . . . 4-19 Pressure Relief/Sustaining Valve. . . . . . . . . . . . . . . . . . . . 5-8
Series 730 Vic-Strainer Tee Type Strainer. . . . . . . . . . . . . . . 4-20 Victaulic Series 971/Bermad Model BC-710-P
Solenoid Control Valve On/Off . . . . . . . . . . . . . . . . . . . . . 5-8
Series W730 AGS Vic-Strainer Tee Type Strainer. . . . . . . . . . 4-20
Victaulic Series 972-55/Bermad Model BC-720-55-P
Series 732 Vic-Strainer Wye Type Strainer. . . . . . . . . . . . . . . 4-21 Solenoid Control Valve On/Off . . . . . . . . . . . . . . . . . . . . . 5-9
Series W732 AGS Vic-Strainer Wye Type Strainer . . . . . . . . . 4-21 Victaulic Series 972-2B/Bermad Model BC-720-2B-P
Victaulic Series 968-F/Bermad Model BC-70F-P Strainer . . . 4-22 Pressure Reducing Valve with Integral Low-Flow Bypass.5-10
Victaulic Series 968-F-SS/Bermad Model BC-70F-P-SS Victaulic Series 972-2B-SS/Bermad Model BC-720-2B-P-SS
Strainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Pressure Reducing Valve with Integral Low-Flow Bypass.5-10
Victaulic Series 969-F/Bermad Model BC-80F-P Victaulic Series 975-82/Bermad Model BC-750-82
High Pressure Strainer. . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 Level Control Valve with Modulating Altitude Pilot. . . . . . 5-11
Style 150 Mover Expansion Joint. . . . . . . . . . . . . . . . . . . . . . 4-23 Victaulic Series 975-67/Bermad Model BC-750-67-P
Style 155 Expansion Joint. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Level Control Valve with Modulating Vertical Float. . . . . . 5-11
Style 155P Expansion Joint for OGS Potable Water Victaulic Series 935-H/Bermad Model BC-CAP-P
Piping Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 Direct Acting Pressure Reducing Valve. . . . . . . . . . . . . . 5-12
Style 257 Dynamic Movement Joint. . . . . . . . . . . . . . . . . . . 4-38 Victaulic Series 970/Bermad Series 700. . . . . . . . . . . . . . . . 5-12
Style W257 Dynamic Movement Joint. . . . . . . . . . . . . . . . . . 4-39 Victaulic Series 980/Bermad Series 800. . . . . . . . . . . . . . . . 5-13
No. A10 Carbon Steel Riser Anchor. . . . . . . . . . . . . . . . . . . . 4-41 Hydraulic Control Valves Spare Parts. . . . . . . . . . . . . . . . . . . 5-14
No. A20 AGS Carbon Steel Heavy Riser Anchor . . . . . . . . . . 4-41 SECTION 6 – Air Valves
No. A40 Carbon Steel Riser Anchor for Tight Spaces . . . . . . 4-42 Series 9A7 Air Release Valve. . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Horizontal Pipe Clamp Anchors Series 9C3 Combination Air Valve. . . . . . . . . . . . . . . . . . . . . . 6-3
No. A81 Long Adjustable Pipe Clamp Anchor. . . . . . . . . 4-42 Series 9C7 Combination Air Valve. . . . . . . . . . . . . . . . . . . . . . 6-3
No. A82 Short Adjustable Pipe Clamp Anchor. . . . . . . . . 4-42 Series 9C5-P Combination Air Valve. . . . . . . . . . . . . . . . . . . . 6-4
No. A83 Long Fixed Pipe Clamp Anchor . . . . . . . . . . . . . 4-43 Series 9C5-N-N Combination Air Valve. . . . . . . . . . . . . . . . . . 6-6
No. A84 Short Fixed Pipe Clamp Anchor. . . . . . . . . . . . . 4-43 Series 9C5 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
No. WA20 AGS Carbon Steel Heavy Riser Anchor. . . . . . . . . 4-43 SECTION 7 – Hydronic Balancing Product
No. A190 Carbon Steel Riser Movement Fitting. . . . . . . . . . . 4-44 Manual Balancing Valves
No. A191 Carbon Steel Anchor Outlet Fitting. . . . . . . . . . . . . 4-44 TA Series 786H STAS – Solder End. . . . . . . . . . . . . . . . . . 7-2
SECTION 5 – Hydraulic Control Valves TA Series 787H STAD – NPT (Fem.) End. . . . . . . . . . . . . . 7-2
Victaulic Series 972/Bermad Model BC-720-P Series 78KH STADK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Pressure Reducing Valve. . . . . . . . . . . . . . . . . . . . . . . . . 5-2 TA Series 788 STAF – Flanged End. . . . . . . . . . . . . . . . . . 7-3
Victaulic Series 972-SS/Bermad Model BC-720-P-SS TA Series 789 STAG – Grooved End. . . . . . . . . . . . . . . . . . 7-3
Pressure Reducing Valve. . . . . . . . . . . . . . . . . . . . . . . . . 5-2 TA Series 790 Balancing Valve for
Victaulic Series 972-PD/Bermad Model BC-720-PD-P Potable Water Applications. . . . . . . . . . . . . . . . . . . . . 7-3
Proportional Pressure Reducing Valve . . . . . . . . . . . . . . . 5-3 TA Series 7TZ Therm Zero Valve for
Victaulic Series 972-PD-SS/Bermad Model BC -720-PD-P-SS Potable Water Applications. . . . . . . . . . . . . . . . . . . . . 7-4
Proportional Pressure Reducing Valve . . . . . . . . . . . . . . . 5-3 TA Series 7SM Control Valve . . . . . . . . . . . . . . . . . . . . . . . 7-5
Victaulic Series 982-PP/Bermad Model BC-820-PP-P Domestic Water Kits –
High Pressure Proportional Pressure Reducing Valve. . . . 5-4 Series 7WB, Series 7W9, Series 7WT & Series 7WX. . 7-6
Victaulic Series 973-Q/Bermad Model 73Q-P TA Series 78BL Balancing Ball Valve. . . . . . . . . . . . . . . . . 7-7
Pressure Relief Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
TA Series 786H and 787H Insulation Kits . . . . . . . . . . . . . 7-8
Victaulic Series 973-QHP/Bermad Model BC-73Q-P
Pressure Relief Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 TA Series 788 and 789 Insulation Kits. . . . . . . . . . . . . . . . 7-8
Victaulic Series 979-4/Bermad Model BC-794-P TA Series 786H Drain Kit. . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Excessive Pressure Shut Off Valve. . . . . . . . . . . . . . . . . . 5-5 Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Victaulic Series 979-4-SS/Bermad Model BC-794-P-SS Automatic Balancing Valves
Excessive Pressure-Shut Off Valve. . . . . . . . . . . . . . . . . . 5-6 Series 76T – Female x Female Threaded. . . . . . . . . . . . . 7-10
Victaulic Series 972S-H/Bermad Model BC-72S-H-P Series 76B – Female x Female Threaded with
Pressure Reducing System with “Watchdog” Ball Valve Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Hydraulic Backup Valve. . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Series 76K – Male x Female Threaded. . . . . . . . . . . . . . . 7-10
Victaulic Series 972S-2B-H/Bermad Model BC-72S-2B-H-P
Watchdog PRV Combo with Integrated Low-Flow Bypass. 5-7 Series 76V – Male x Female Threaded with Ball Valve Kit. 7-11
Victaulic Series 970-N/Bermad Model BC-70N-P Check Valve.5-7 Series 76V Integrated –
Male x Female Threaded with Ball Valve Kit . . . . . . . 7-11
Victaulic Series 973/Bermad Model BC-730-P Pressure Relief/
Sustaining Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Series 76G – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Series 76T Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Automatic Balancing Valve Cartridges . . . . . . . . . . . . . . . 7-12
VICTAULIC.COM PL2022-A-GEN IX
Table of Contents
Balancing Control Valves Balancing Instruments
TA Series TC – On/Off Control. . . . . . . . . . . . . . . . . . . . . 7-15 Dongle for Slider Actuators 7CP and 7MP . . . . . . . . . . . . 7-66
TA Series TCM – Modulating Control . . . . . . . . . . . . . . . . 7-17 TA Series 736 TA Link Differential Pressure Sensor. . . . . 7-66
Tailpiece Accessories for 7CP and 7MP. . . . . . . . . . . . . . 7-19 Universal Gauge Meter Conversion Kit. . . . . . . . . . . . . . . 7-66
Balancing Control Valve Actuators . . . . . . . . . . . . . . . . . . 7-20 TA Series 734 SCOPE Balancing Instrument . . . . . . . . . . 7-67
TA Series 7CP – Compact Pressure Independent SECTION 8 – Plain End Couplings and Fittings
Balancing and Control Valve. . . . . . . . . . . . . . . . . . . 7-21 Style 99 Roust-A-Bout Coupling. . . . . . . . . . . . . . . . . . . . . . . 8-2
TA Series 7MP – Brass Pressure Independent Balancing Gaskets for Style 99 Couplings . . . . . . . . . . . . . . . . . . . . . . . . 8-2
and Modulating Control Valve. . . . . . . . . . . . . . . . . . 7-28
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 8-3
TA Series 7MP – High Pressure Independent Balancing
and Modulating Control Valve. . . . . . . . . . . . . . . . . . 7-34 No(s). 40-P, 42-P and 43-P Adapter Nipples. . . . . . . . . . . . . . 8-3
TA Series 7MP – Ductile Iron Pressure Independent Plain End Fittings
Balancing and Modulating Control Valve. . . . . . . . . . 7-37 No. 10-P – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
TA Series 76W 6-Way Valve. . . . . . . . . . . . . . . . . . . . . . . 7-43 No. 11-P – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Balancing Control Valve Presetting Tool. . . . . . . . . . . . . . 7-43 No. 20-P – Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Series 76X ICSS – Low Lead Balancing Valve. . . . . . . . . . 7-44 No. 61-P – Bull Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
TA Series 7FP (FUS1ON P). . . . . . . . . . . . . . . . . . . . . . . 7-45 No. 33-P – Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Standard Koil-Kit™ Coil Pack No. 30-P – Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Manual Koil-Kit™ Coil Pack with Series 78KH No. 35-P – Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Union Inlet Globe Style Valves . . . . . . . . . . . . . . . . . 7-49 No. 53-P – Swaged Nipples. . . . . . . . . . . . . . . . . . . . . . . . 8-6
Manual Koil-Kit™ Coil Pack with TA Series 786H No. 25-P – Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
Sweat Globe Style Valves . . . . . . . . . . . . . . . . . . . . . 7-50 QuickVic™ SD Installation-Ready™ System\
Manual Koil-Kit™ Coil Pack with Series 78BL Style P07 Installation-Ready™ Coupling. . . . . . . . . . . . . . . 8-8
Quarter Turn Balancing Ball Valves. . . . . . . . . . . . . . 7-51
Style P08 Installation-Ready™ Slip Coupling . . . . . . . . . . . 8-8
Automatic Koil-Kit™ Coil Pack with Series 76V Automatic
Union Inlet Balancing Valve with Cartridges . . . . . . . 7-53 Style P50 Installation-Ready™ Slip Coupling . . . . . . . . . . . 8-8
Series 79C Koil-Kit™ Coil Pack . . . . . . . . . . . . . . . . . . . . 7-55 No. P10 Installation-Ready™ 90° Elbow . . . . . . . . . . . . . . 8-9
Series 79D Koil-Kit™ Coil Pack with Style 925 Drain/ No. P11 Installation-Ready™ 45° Elbow. . . . . . . . . . . . . . . 8-9
Air Vent Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 7-55 No. P20 Installation-Ready™ Tee . . . . . . . . . . . . . . . . . . . 8-9
Style 925 – Drain/Air Vent Assembly . . . . . . . . . . . . . . . . 7-55 No. P25 Installation-Ready™ Reducing Tee. . . . . . . . . . . 8-10
Optional Tailpieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56 No. P27 Reducing on Run Tee . . . . . . . . . . . . . . . . . . . . 8-10
Union Collar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56 No. P60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Bypass Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-56 No. P60 Tapped Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Koil-Kit™ Coil Pack Components Replacement Retainer Rings . . . . . . . . . . . . . . . . . . . . . . 8-11
Series 78Y – Strainer/Ball Valve Combination. . . . . . . . . . 7-57 No. P40 Threaded Adapter (Male NPT x Plain End). . . . . 8-11
Series 78T – Ball Valve Union Combination. . . . . . . . . . . 7-57 No. P80 Threaded Adapter (Female NPT x Plain End). . . 8-11
Series 78U – Union Port Fitting. . . . . . . . . . . . . . . . . . . . 7-57 No. P47 Straight Dielectric Adapter . . . . . . . . . . . . . . . . . 8-12
Coil Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58 No. P97 90° Elbow Dielectric Adapter. . . . . . . . . . . . . . . 8-12
Series 78Y and 78T Handle Extension. . . . . . . . . . . . . . . 7-58 No. P42 Close Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Replacement O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-59 Series P89 Full Port Ball Valve. . . . . . . . . . . . . . . . . . . . . 8-13
Hose Adapter Replacement Parts . . . . . . . . . . . . . . . . . . 7-59 PC3110 Cut and Mark Tool . . . . . . . . . . . . . . . . . . . . . . . 8-13
Port Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-59 SECTION 9 – Vic-Press™ System
Differential Pressure Controllers for Schedule 10S Stainless Steel Pipe
TA Series 793 – Threaded Ends. . . . . . . . . . . . . . . . . . . . 7-60 Vic-Press™ System for Type 304 Schedule 10S
Stainless Steel Pipe
TA Series 794 – Flanged Ends. . . . . . . . . . . . . . . . . . . . . 7-60
Style P500 Loose Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
TA Series 782 Bypass Valve. . . . . . . . . . . . . . . . . . . . . . . 7-61
Style P597 Standard Coupling. . . . . . . . . . . . . . . . . . . . . . 9-3
TA Series 7PR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-61
Style P596 Male Adapter – Threaded. . . . . . . . . . . . . . . . . 9-3
TA Series 7DA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62
Series P569 Type 316 Stainless Steel Ball Valve. . . . . . . . . 9-4
TA Series 793 Insulation Kits. . . . . . . . . . . . . . . . . . . . . . 7-62
Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 9-4
TA Series 793 Differential Pressure Control Valve &
TA Series 787H Balancing Valve with Drain Kit. . . . . 7-63 Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . . 9-4
TA Series 7DA Compact Differential Pressure Valve & Style P542 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . . 9-5
TA Series 787H Balancing Valve with Drain Kit. . . . . 7-64 Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
Differential Pressure Controller Accessories. . . . . . . . . . . 7-65 Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 9-5
X VICTAULIC.COM PL2022-A-GEN
Table of Contents
Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6 SECTION 11 – CPVC Products
Style P593 Tee – Reducing Branch. . . . . . . . . . . . . . . . . . 9-6 Style 356 Installation-Ready™ Transition Coupling . . . . . . . . 11-2
Style P588 Tee – Reducing Branch – Threaded. . . . . . . . . 9-7 Style 357 Installation-Ready™ Rigid Coupling. . . . . . . . . . . . 11-2
Style P594 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 9-7 Style 358 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Style 856 Installation-Ready™ Transition Coupling for
Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Potable Water Applications. . . . . . . . . . . . . . . . . . . . . . . 11-4
Style P587 Transition Nipple. . . . . . . . . . . . . . . . . . . . . . . 9-8 Style 857 Installation-Ready™ Rigid Coupling for
Potable Water Applications. . . . . . . . . . . . . . . . . . . . . . . 11-4
Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 9-9
Style 858 Reducing Coupling for Potable Water Applications. 11-5
Style P599 Female Adapter – Threaded. . . . . . . . . . . . . . . 9-9
No. 350 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
Style P561 Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9
No. 351 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
No. 352 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
PFT510 Vic-Press™ Tool. . . . . . . . . . . . . . . . . . . . . . . . . 9-10
No. 353 Reducing Tee Groove x Groove x Groove. . . . . . . . . 11-7
Vic-Press™ System for Type 316 Schedule 10S
Stainless Steel Pipe No. 354 Reducing Tee Groove x Groove x Socket . . . . . . . . . 11-8
Style P500 Loose Seals. . . . . . . . . . . . . . . . . . . . . . . . . . 9-12 No. 359F Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8
Style P507 Standard Coupling. . . . . . . . . . . . . . . . . . . . . 9-12 No. 361 Reducing Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
Style P576 Male Adapter – Threaded. . . . . . . . . . . . . . . . 9-12 Style 355 PGS-300 Expansion Joint. . . . . . . . . . . . . . . . . . 11-10
Style P508 Slip Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 9-13 Style 355P PGS-300 Expansion Joint for Potable Water
Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
Series P569 Stainless Steel Ball Valve. . . . . . . . . . . . . . . 9-13
CG1100 Cut Grooving Tool for CPVC/PVC Pipe . . . . . . . . . . 11-16
Series P569 Repair Kits. . . . . . . . . . . . . . . . . . . . . . . . . . 9-14
SECTION 12 – Copper Connection Products
Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . 9-14
Style 607 QuickVic™ Rigid Coupling for Copper Tubing. . . . . 12-2
Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . . 9-14
Style 644 Installation-Ready™ Transition Coupling for
Style P562 90° Street Elbow. . . . . . . . . . . . . . . . . . . . . . 9-14 Copper Tubing to Stainless Steel Pipe . . . . . . . . . . . . . . 12-2
Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15 Style 622 Mechanical-T Bolted Branch Outlet for
Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . 9-15 Copper Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15 Style 622 Mechanical-T Cross Assembly for Copper Tubing. 12-3
Style P573 Tee – Reducing Branch. . . . . . . . . . . . . . . . . 9-16 Style 641 Vic-Flange Adapter for Copper Tubing. . . . . . . . . . 12-4
Style P578 Tee – Reducing Branch Threaded . . . . . . . . . 9-16 Grooved End Copper Fittings
Style P574 Concentric Reducer. . . . . . . . . . . . . . . . . . . . 9-17 No. 610 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Style P575 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . 9-17 No. 611 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 9-17 No. 620 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Style P577 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . 9-18 No. 660 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5
Style P585 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . 9-18 No. 625 Reducing Tee Groove x Groove x Groove . . . . . . 12-5
Style P579 Female Adapter – Threaded. . . . . . . . . . . . . . 9-18 No. 626 Reducing Tee Groove x Groove x Cup. . . . . . . . . 12-6
Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19 No. 643 Copper Adapter Nipple. . . . . . . . . . . . . . . . . . . 12-6
PFT510 Vic-Press™ Tool. . . . . . . . . . . . . . . . . . . . . . . . . 9-19 No. 650 Concentric Reducer Groove x Groove x Groove. . 12-6
SECTION 10 – HDPE Products No. 652 Concentric Reducer Groove x Cup. . . . . . . . . . . 12-7
Style 905 Coupling for HDPE Pipe . . . . . . . . . . . . . . . . . . . . 10-2 Series 608N Copper Connection Butterfly Valve. . . . . . . . . . 12-8
Style 2971 Aquamine™ Transition Coupling for GDC-CTS Go/No-Go Groove Diameter Cable. . . . . . . . . . . . . 12-8
PVC to HDPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4 SECTION 13 - Aluminum Products
Style 908 Coupling for Double Grooved HDPE Pipe. . . . . . . . 10-5 Aluminum Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Style 904 Flange Adapter for HDPE-to-Flanged Pipe. . . . . . . 10-6 Aluminum Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Style 926 Mechanical-T Spigot . . . . . . . . . . . . . . . . . . . . . . . 10-7 SECTION 14 - Stainless Steel Products
Style 926 Spigot Hole Saw for HDPE Pipe. . . . . . . . . . . . . . . 10-7 Ductile Iron Couplings for Stainless Steel Pipe
Style 995N HDPE Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 10-8 Style 89 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 14-2
Style 997 HDPE-to-Steel Transition Coupling. . . . . . . . . . . . . 10-8 Style 889 Rigid Coupling for Potable Water Applications. 14-2
HDPE Plain End Fittings Style W89 AGS Rigid Coupling. . . . . . . . . . . . . . . . . . . . . 14-3
No. H10 – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9 Stainless Steel and Duplex Couplings
No. H11 – 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9 Style 489 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 14-4
No. H20 – Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9 Style W489 AGS Stainless Steel Rigid Coupling. . . . . . . . 14-4
No. H50 – Concentric Reducer. . . . . . . . . . . . . . . . . . . . 10-9 Style 489DX Duplex Rigid Coupling. . . . . . . . . . . . . . . . . 14-5
Series 906 Knife Gate Valve for Plain End HDPE Pipe. . . . . 10-10 Style 475 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . 14-5
CG3100/3300/3500 Cut Grooving Tool for HDPE Pipe . . . . 10-12 Style 475DX Duplex Flexible Coupling . . . . . . . . . . . . . . . 14-6
VICTAULIC.COM PL2022-A-GEN XI
Table of Contents
Style 77DX Duplex Flexible Coupling . . . . . . . . . . . . . . . . 14-6 Series 416 Stainless Steel Check Valve. . . . . . . . . . . . . . 14-30
Style 77S Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . 14-7 Series 816 Stainless Steel Check Valve for
Stainless Steel Flange Adapters Potable Water Applications. . . . . . . . . . . . . . . . . . . 14-30
Style 441 Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . . . 14-7 SECTION 15 - Steam, Condensate and
Chemical System Products
No. 445F and No. 445R Stainless Steel Flange
Adapter Nipples. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-8 Style 870 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2
Style 422 Branch Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-9 Series 871 Gate Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2
No. A10S Stainless Steel Riser Anchor . . . . . . . . . . . . . . . . 14-10 Series 871R Modular Gate Valve. . . . . . . . . . . . . . . . . . . . . . 15-2
No. A40S Stainless Steel Riser Anchor for Tight Spaces. . . 14-10 Series 159 Flexible Loop. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3
Schedule 10S Stainless Steel Fittings Carbon Steel OGS-200 Grooved End Fittings
No. 410 SS 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 14-11 No. 890C and 890HC – Long Radius 90° Elbow. . . . . . . 15-3
No. 411 SS 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 14-11 No. 811C and 811HC – 45° Elbow. . . . . . . . . . . . . . . . . . 15-3
No. W410 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 14-11 No. 820C and No. 820HC Tee. . . . . . . . . . . . . . . . . . . . . 15-3
No. W411 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 14-11 No. 825C and No. 825HC Reducing Tee. . . . . . . . . . . . . 15-4
No. 412 SS 22½° Elbow . . . . . . . . . . . . . . . . . . . . . . . . 14-12 No. 850C and No. 850HC Concentric Reducer. . . . . . . . 15-4
No. 413 SS 11¼° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-12 No. 851C and No. 851HC Eccentric Reducer. . . . . . . . . . 15-5
No. 420 SS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-12 No. 860C and No. 860HC Cap. . . . . . . . . . . . . . . . . . . . 15-5
No. W420 AGS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-12 No. 860T Carbon Steel Tapped Cap . . . . . . . . . . . . . . . . 15-5
No. 425 SS Reducing Tee. . . . . . . . . . . . . . . . . . . . . . . 14-13 No(s). 845FC and No. 846FS Flat Face
ANSI Class 150 Flange Adapter Nipples. . . . . . . . . . 15-6
No. W425 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 14-14
No(s). 845RC and 846RC Raised Face
No. 430 SS 45° Lateral. . . . . . . . . . . . . . . . . . . . . . . . . 14-15 ANSI Class 300 Flange Adapter Nipples. . . . . . . . . . 15-6
No. 433 SS True Wye . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 No. 843 Grooved Adapter Nipple. . . . . . . . . . . . . . . . . . . 15-6
No. 435 SS Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 No. 895i OGS-200 Groove x OGS-200
No(s). 442 SS and 443 SS Adapter Nipples. . . . . . . . . . 14-15 Groove x NPT Thread Instrumentation Nipple. . . . . . 15-7
No(s). W442, W443 and W449 AGS Adapter Nipples. . . 14-16 Stainless Steel OGS-200 Grooved End Fittings
No. 450 SS Concentric Reducer . . . . . . . . . . . . . . . . . . 14-16 No. 890S – Long Radius 90° Elbow. . . . . . . . . . . . . . . . . 15-7
No. W450 AGS Concentric Reducer. . . . . . . . . . . . . . . . 14-17 No. 811S – 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . 15-7
No. 451 SS Eccentric Reducer. . . . . . . . . . . . . . . . . . . .14-18 No. 820S Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-8
No. W451 AGS Eccentric Reducer. . . . . . . . . . . . . . . . . 14-19 No. 825S Reducing Tee. . . . . . . . . . . . . . . . . . . . . . . . . . 15-8
No. W445R AGS Flanged Adapter Nipple. . . . . . . . . . . .14-19 No. 850S Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 15-8
No. 460 SS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-20 No. 851S Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . 15-8
No. W460 AGS Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-20 No. 860S Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-9
Schedule 40S Stainless Steel Fittings No. 845FS – ANSI Class 150 Flat Face
No. 410H SS 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-21 Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 411H SS 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . 14-21 No. 845RS – ANSI Class 150 Raised Face
No. 412H SS 22½° Elbow. . . . . . . . . . . . . . . . . . . . . . . 14-21 Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 413H SS 11¼° Elbow . . . . . . . . . . . . . . . . . . . . . . . 14-21 No. 846FS – ANSI Class 300 Flat Face
Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 420H SS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-22
No. 846RS – ANSI Class 300 Raised Face
No. 425H SS Reducing Tee. . . . . . . . . . . . . . . . . . . . . . 14-22 Flange Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . 15-9
No. 430H SS 45° Lateral. . . . . . . . . . . . . . . . . . . . . . . . 14-23 No. 826 Steam Outlet Fitting. . . . . . . . . . . . . . . . . . . . . 15-10
No. 433H SS True Wye, No. 435H SS Cross. . . . . . . . . 14-23 Nos. 891C, 891H, 892C and 892H Steam and
No. 440H SS Adapter Nipples. . . . . . . . . . . . . . . . . . . . 14-23 Condensate In-Line Drip Leg Fittings. . . . . . . . . . . . . . 15-11
No(s). 442H SS and 443H SS Adapter Nipples. . . . . . . 14-24 Nos. 893C, 893H, 894C and 894H Steam and
No. 450H SS Concentric Reducer. . . . . . . . . . . . . . . . . 14-24 Condensate Riser Drip Leg Fittings . . . . . . . . . . . . . . . 15-11
No. 451H SS Eccentric Reducer . . . . . . . . . . . . . . . . . . 14-25 RG1200 OGS-200 Roll Grooving Tool . . . . . . . . . . . . . . . . . 15-12
No. 460H SS Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-25 RG1210 OGS-200 Roll Grooving Tool . . . . . . . . . . . . . . . . . 15-12
Stainless Steel Valves OGS-200 Carbon Steel Grooving Rolls. . . . . . . . . . . . . . . . . 15-13
Series 461 Vic-300 MasterSeal™ Stainless Steel OGS-200 Stainless Steel Grooving Rolls . . . . . . . . . . . . . . . 15-13
Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-26 Go/No Go Groove Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-13
Series 861 Vic-300 MasterSeal™ Stainless Steel SECTION 16 - Large Diameter AGS Vic-Ring Products
Butterfly Valve for Potable Water Applications. . . . . 14-28 Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings . . . 16-2
Series 726-S Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . 14-29 Style W07 AGS Rigid Coupling for AGS Vic-Ring System. . . . 16-4
Series 712-S Check Valve . . . . . . . . . . . . . . . . . . . . . . . 14-29 Style W77 AGS Flexible Coupling for AGS Vic-Ring System. . 16-5
XII VICTAULIC.COM PL2022-A-GEN

Table of Contents
SECTION 17 – Pipe Preparation Tools VG824. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-26
Roll Grooving Tools – Field Portable VG824-ABR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-27
VE12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3 VG824-COR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-28
VE26 S/C/SS/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3 VG824DG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-28
VE26/VE46 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . 17-3 VG828. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-29
VE46/P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3 VG Vic-Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-30
RG1200 Roll Grooving Tool . . . . . . . . . . . . . . . . . . . . . . . 17-4 VG412. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-32
RG1210 Roll Grooving Tool. . . . . . . . . . . . . . . . . . . . . . . .17-4 Cut Grooving Tools for CPVC/PVC Plastic Pipe
VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . 17-5 CG1100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-33
VE226 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5 VPG824. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-33
Roll Grooving Tools – Field Fabrication CG3300/3500 Cut Grooving Tool for HDPE Pipe. . . . . . 17-34
VE106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-6 Style 926 Spigot Hole Saw for HDPE Pipe. . . . . . . . . . . 17-34
VE206. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-7 Hole Cutting Tools
RG3212. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-8 VHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-35
VE272SFS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-9 HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-35
VE270FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-10 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-35
VE416FS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-11 Vic-Tap II Hot Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-36
VE416FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-12 Pipe Cut-Off Tools
VE450FSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-13 VCT1 – Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-37
Roll Grooving Tools – Shop Fabrication VCT2 – Automatic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-37
VE268. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-14 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-37
VE414MC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-15 PC3110 Cut and Mark Tool with Chamfering Feature. . . 17-38
VE460. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-16 Vic-Press™ Tool
50T 17-18 PFT510. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-39
50T Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . 17-18 Pipe Preparation Tool Accessories
RG5200i. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19 Power Mule II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-40
Victaulic Fabrication Cell . . . . . . . . . . . . . . . . . . . . . . . . 17-20 PT100A Go/No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . . 17-40
VAPS112 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21 PT102A AGS Go/No-Go Pipe Tape. . . . . . . . . . . . . . . . . 17-41
VAPS224 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21 GDC-CTS Go/No-Go Groove Diameter Cable . . . . . . . . . 17-41
VAPS1672 Pipe Stand. . . . . . . . . . . . . . . . . . . . . . . . . . 17-22 GDC-PGS-300 Go/No-Go Groove Diameter Cable . . . . . 17-41
VE436MC Quick Change Slide Conversion Kit . . . . . . . . 17-22 Tool Carry Bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-41
Cut Grooving Tools – Field Fabrication No. T-60 Test Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 17-42
VG28GD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-23 Terms and Conditions of Tool Rental. . . . . . . . . . . . . . . . . . 17-44
VG28GD-ABR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-24 Terms and Conditions of Tool Sale. . . . . . . . . . . . . . . . . . . . 17-45
Table of contents
VDG26GD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-24 Terms and Conditions of Sale . . . . . . . . . . . . . . Inside Back Cover

VG26GD-COR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-25 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
VICTAULIC.COM PL2022-A-GEN XIII

Gaskets
Gasket Selection Guide

IMPORTANT PLEASE READ BEFORE ORDERING.
Gasket selection must always be specified on your order.
For information pertaining to gasket seals for couplings, seals for Vic-Press™
products, O-rings for Victaulic® Bolted Split Sleeve products and general definition/
seal material Selection, refer to publication 05.01.
For specific chemical and temperature compatibility, refer to the
Gasket Chemical Services Guide Long Report (GSG-100).
XIV VICTAULIC.COM PL2022-A-GEN

SECTION 1 – Couplings and Fittings
Couplings and
Fittings
VICTAULIC.COM PL2022-A-GEN 1-1

Grooved IPS Pipe Couplings
Style 107V QuickVic™ Rigid Coupling

QuickVic™ Rigid STYLE 107V – GRADE “EHP” GASKET
COUPLING
Coupling COMPLETE †
With Grade
STYLE 107V Approx. “EHP” or “T”
Refer to publication 06.33 PIPE Wgt. Ea. Gasket SPARE PARTS
inches Price Each Grade Plated Bolt & Nut
“EHP” or
Nom. Outside “T” Size
Size Dia. lb Painted Gasket No. * inches Price Each
2 2.375 2.9 $136.50 $107.00 NR 2 ½ x 2¾ $43.50
2½ 2.875 3.3 154.50 116.00 NR 2 ½ x 2¾ 43.50
3 3.500 3.7 178.50 131.00 NR 2 ½ x 3 43.50
4 4.500 5.0 247.00 174.50 NR 2 ½ x 3 43.50
6 6.625 8.1 416.00 290.50 NR 2 ⅝ x 3⅝ 82.00
8 8.625 16.1 657.00 349.50 NR 2 ¾ x 5 150.00
10 10.750 24.7 1271.00 403.50 NR 2 ⅞ x 6½ 267.50
12 12.750 29.1 1419.50 448.00 2 ⅞ x 6½ 267.50
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
NR
Non-returnable
Orders for the Style 107N QuickVic™ Rigid Coupling may be automatically substituted for the Style 107V QuickVic™ Rigid
Coupling at Victaulic’s discretion.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
1-2 VICTAULIC.COM PL2022-A-GEN

Style 107N QuickVic™ Rigid Coupling
QuickVic™ Rigid Coupling

STYLE 107N
Refer to publication 06.23
2 – 8” 10 – 12”
STYLE 107N – GRADE “EHP”, “T”, OR “O” GASKET
COUPLING
COUPLING COMPLETE † COMPLETE †
Approx. With Grade “EHP” * or With Grade
PIPE Wgt. Ea. “T” Gasket “O” Gasket SPARE PARTS
inches Price Each Price Each Grade Plated Bolt & Nut
“EHP” or
Nom. Outside “T” Grade “O” Size
Size Dia. lb Painted Galv. Painted Gasket Gasket No. * inches Price Each
2 2.375 2.7 $136.50 $171.50 $740.00 $107.00 NR $651.00 2 ½ x 3 $43.50
2½ 2.875 3.0 154.50 194.50 832.50 116.00 NR 726.50 2 ½ x 3 43.50
3 3.500 3.7 178.50 226.50 925.00 131.00 NR 809.00 2 ½ x 3¼ 67.50
4 4.500 5.1 247.00 318.50 1522.00 174.50 NR 1321.00 2 ½ x 3¼ 67.50
5 5.563 7.0 318.50 414.00 + 261.50 + 2 ⅝ x 4 82.00 NR
6 6.625 8.2 416.00 541.00 2066.50 290.50 NR 1787.50 2 ⅝ x 4 82.00 NR
8 8.625 15.1 657.00 853.50 2486.50 349.50 NR 2023.50 2 ¾ x 5 150.00
10 10.750 23.6 1271.00 1694.50 4188.00 403.50 NR 2599.00 2 ⅞ x 6½ 267.50
12 12.750 27.2 1422.50 1900.50 5854.00 448.00 3782.00 2 ⅞ x 6½ 267.50

NR
Non-returnable
+ Quoted on application. Contact Victaulic for pricing and availability.
* Product may be automatically substituted for the Style 107V QuickVic™ Rigid Coupling at Victaulic’s discretion.

Style 807N QuickVic™ Installation-Ready™ Rigid Coupling for Potable Water Applications
QuickVic™ STYLE 807N – GRADE “P” GASKET
Approx. Wgt. COUPLING COMPLETE

Installation-Ready™ PIPE Ea. With Grade “P” Gasket SPARE PARTS
Rigid Coupling inches Price Each
for Potable Water Nom.
Size
Outside
Dia. lb Painted Galv.
Grade “P”
Gasket
Applications 2 2.375 2.7 $140.00 $176.00 $110.00
2½ 2.875 3.0 158.50 199.50 119.00
STYLE 807N 3 3.500 3.7 183.50 232.50 134.50
Refer to publication 06.28 4 4.500 5.1 254.00 327.50 179.50
6 6.625 8.2 427.50 556.00 298.50
8 8.625 15.1 675.00 877.00 359.00
10 10.750 23.6 1306.00 1741.50 414.50
12 12.750 27.2 1458.50 1953.00 460.50
NOTE: Available with stainless steel bolts and nuts. Contact Victaulic for pricing.
Style 07 Zero-Flex™ Rigid Coupling
Zero-Flex™ STYLE 07 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
COUPLING
Rigid Coupling COUPLING COMPLETE †
Approx. COMPLETE † with Flush-Seal
STYLE 07 Wgt. With Grade “E” or Grade “E” or “T”
PIPE Ea. “T” Gasket Gasket SPARE PARTS
(with Style 77 gasket) inches Price Each Price Each Plated Bolt & Nut
Refer to publication 06.02 Nom. Outside Size §
Size Dia. lb Painted Galv. Painted Galv. No. * Inches
1 1.315 1.6 $124.00 $155.50 $174.50 $208.50 2 ⅜ x 2
1¼ 1.660 1.6 116.00 146.00 164.50 195.00 2 ⅜ x 2
1½ 1.900 1.6 124.00 155.50 174.50 208.50 2 ⅜ x 2
2 2.375 2.3 158.50 196.50 207.50 246.00 2 ½ x 2½
2½ 2.875 2.6 179.00 226.00 247.00 289.00 2 ½ x 2¾
3 3.500 3.0 208.00 262.50 261.50 319.00 2 ½ x 2½
4 4.500 5.3 287.00 369.00 364.00 448.00 2 ½ x 2¾
5 5.563 7.4 369.00 481.50 574.00 1009.00 2 ⅝ x 3¼
6 6.625 8.3 487.50 630.50 675.00 826.00 2 ⅝ x 3¼
8 8.625 15.1 764.50 993.00 892.50 1116.00 2 ¾ x 4¼
10 10.750 23.5 1483.50 1979.00 1783.00 2262.50 2 ⅞ x 6½
12 12.750 28.2 1657.50 2218.00 2026.50 2606.00 2 ⅞ x 6½
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
NOTE: For 14 - 24” Style 07 couplings contact your local Victaulic sales representative.

Zero-Flex™ STYLE 07 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET
COUPLING COUPLING
Rigid Coupling COMPLETE † COMPLETE †
Approx. With Silicone With Fluoroelastomer
STYLE 07 PIPE Wgt. Ea. Grade “L” Gasket Grade “O” Gasket SPARE PARTS
inches Price Each Price Each Plated Bolt & Nut
(with Style 77 gasket) Nom. Outside Size §
Refer to publication 06.02 Size Dia. lb Painted Galv. Painted Galv. No. * Inches
1 1.315 1.6 $283.50 $313.50 $798.00 $829.50 2 ⅜ x 2
1¼ 1.660 1.6 266.00 291.50 716.00 748.50 2 ⅜ x 2
1½ 1.900 1.6 378.00 406.50 798.50 831.00 2 ⅜ x 2
2 2.375 2.3 298.50 335.00 761.50 797.50 2 ½ x 2½
2½ 2.875 2.6 338.00 385.00 856.50 897.50 2 ½ x 2¾
3 3.500 3.0 380.50 435.00 954.50 1011.00 2 ½ x 2½
4 4.500 5.3 564.50 644.00 1562.00 1639.50 2 ½ x 2¾
5 5.563 7.4 1011.00 1115.50 1701.50 1806.50 2 ⅝ x 3¼
6 6.625 8.3 1187.50 1320.00 2137.50 2272.00 2 ⅝ x 3¼
8 8.625 15.1 1483.50 1694.50 2595.00 2807.00 2 ¾ x 4¼
10 10.750 23.5 2683.50 3177.50 4401.50 4894.50 2 ⅞ x 6½
12 12.750 28.2 3079.50 3641.00 6091.00 6653.00 2 ⅞ x 6½
NOTE: For 14 - 24” Style 07 couplings contact your local Victaulic sales representative.
Style L07 Carbon Steel Rigid Coupling
Carbon Steel Rigid STYLE L07 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE
Approx. Wgt. COUPLING COMPLETE With COUPLING COMPLETE With

Coupling PIPE Ea. Grade “E” or “T” Gasket Grade “L” Gasket
inches Price Each Price Each
STYLE L07
Nom. Size Outside Dia. lb Painted Galv. Painted Galv.
SA352 Grade LCC 1½ 1.900 1.8 $387.50 $429.00 + +
Refer to publication 51.01 2 2.375 2.5 467.50 518.50 + +
2½ 2.875 2.9 486.00 540.00 + +
3 3.500 3.3 490.00 544.50 + +
4 4.500 5.8 580.50 650.00 + +
6 6.625 9.1 743.00 838.00 + +
8 8.625 16.6 1101.00 1251.00 + +
10 10.750 25.9 1637.00 1861.00 + +
12 12.750 31.0 1738.50 1985.50 + +

Style W07 AGS Rigid Coupling
Rigid Coupling AGS STYLE W07 – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
COUPLING COMPLETE †
AGS STYLE W07 Approx. With Flush-Seal Grade “E”
PIPE Wgt. Ea. or “T” Gasket SPARE PARTS
inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. lb Painted Galv. No. Inches
14 14.000 49.0 $1456.00 $1793.00 2 1 x 5½
16 16.000 61.0 1554.50 1983.00 2 1 x 5½
18 18.000 71.0 1794.50 2324.50 2 1 x 5½
20 20.000 82.0 2452.00 3073.00 2 1⅛ x 5½
22 22.000 110.0 2842.50 + 2 1⅛ x 5½
24 24.000 116.0 3143.50 3981.50 2 1⅛ x 5½
26 26.000 205.0 5041.00 + 4 1⅜ x 6
14 – 24”
28 28.000 220.0 6006.00 + 4 1⅜ x 6
30 30.000 227.0 8416.00 + 4 1¼ x 7
32 32.000 242.0 9194.50 + 4 1¼ x 7
34 34.000 255.0 + + 4 1¼ x 7
36 36.000 268.0 9916.00 + 4 1¼ x 7
38 38.000 304.0 11395.00 14155.00 4 1½ x 7
40 40.000 340.0 11871.50 + 4 1½ x 8
42 42.000 360.0 13227.00 + 4 1½ x 8
44 44.000 390.0 + + 4 1½ x 8
46 46.000 415.0 + + 4 1½ x 8
26 – 50” 48 48.000 425.0 14220.00 + 4 1½ x 8
50 50.000 500.0 + + 4 1½ x 8

Rigid Coupling AGS STYLE W07 – SILICONE GRADE “L” FLUSH-SEAL™ GASKET
AGS STYLE W07 Approx. With Flush-Seal Silicone
PIPE Wgt. Ea. Grade “L” Gasket SPARE PARTS
inches Price Each Plated Bolt & Nut
Size Dia. lb Painted Galv. No. Inches
14 14.000 49.0 $2990.50 $3327.50 2 1 x 5½
16 16.000 61.0 3291.00 3719.00 2 1 x 5½
18 18.000 71.0 3619.00 4147.00 2 1 x 5½
20 20.000 82.0 4193.50 4813.00 2 1⅛ x 5½
22 22.000 110.0 + + 2 1⅛ x 5½
24 24.000 116.0 4567.50 5404.50 2 1⅛ x 5½
26 26.000 205.0 + + 4 1⅜ x 6
14 – 24”
28 28.000 220.0 + + 4 1⅜ x 6
30 30.000 227.0 + + 4 1¼ x 7
32 32.000 242.0 + + 4 1¼ x 7
34 34.000 255.0 + + 4 1¼ x 7
36 36.000 268.0 + + 4 1¼ x 7
38 38.000 304.0 + + 4 1½ x 7
40 40.000 340.0 + + 4 1½ x 8
42 42.000 360.0 + + 4 1½ x 8
44 44.000 390.0 + + 4 1½ x 8
46 46.000 415.0 + + 4 1½ x 8
26 – 50” 48 48.000 425.0 + + 4 1½ x 8
50 50.000 500.0 + + 4 1½ x 8
Style LW07 AGS Carbon Steel Rigid Coupling
Carbon Steel AGS STYLE LW07 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE

Rigid Coupling PIPE Ea. Grade “E” or “T” Gasket Grade “L” Gasket
AGS STYLE LW07
14 14.000 59.0 + + + +
16 16.000 72.0 + + + +

Style 177N QuickVic™ Flexible Coupling for Steel
QuickVic™ Flexible STYLE 177N – GRADE “EHP”, “T” OR “O” GASKET
COUPLING
Coupling for Steel COUPLING COMPLETE † COMPLETE †
Approx. With Grade “EHP” or “T” With Grade
STYLE 177N PIPE Wgt. Ea. Gasket “O” Gasket SPARE PARTS
Refer to publication 06.24 inches Price Each Price Each Grade
Nom. Outside “EHP” or Grade “O”
Size Dia. lb Painted Galv. Painted “T” Gasket Gasket
2 2.375 3.3 $137.00 $179.00 $662.50 $107.00 NR $651.00
2½ 2.875 3.8 159.00 220.00 747.50 116.00 NR 726.50
3 3.500 4.3 174.50 241.00 829.50 131.00 NR 809.00
4 4.500 7.4 252.00 353.00 1358.50 174.50 NR 1321.00
5 5.563 10.0 401.00 574.00 + 261.50 NR +
6 6.625 12.8 446.50 638.00 1886.50 290.50 NR 1787.50
8 8.625 20.7 766.50 1137.00 2375.00 349.50 NR 2023.50
NR
Non-returnable
Style 877N QuickVic™ Installation-Ready™ Flexible Coupling for Potable Water Applications
QuickVic™ STYLE 877N – GRADE “P” GASKET
Approx. Wgt. COUPLING COMPLETE

Installation-Ready™ PIPE Ea. With Grade “P” Gasket SPARE PARTS
Flexible Coupling inches Price Each
for Potable Water Nom.
Size
Outside
Dia. lb Painted Galv.
Grade “P”
Gasket
Applications 2 2.375 3.3 $141.00 $184.00 $110.00
2½ 2.875 3.8 163.00 226.00 119.00
STYLE 877N 3 3.500 4.3 179.50 248.00 134.50
Refer to publication 06.29 4 4.500 7.4 259.00 362.50 179.50
6 6.625 12.8 459.00 655.50 298.50
8 8.625 20.7 787.50 1168.50 359.00

Style 77 Flexible Coupling
Standard Coupling STYLE 77 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
COUPLING
STYLE 77 COUPLING COMPLETE †
COMPLETE † With Flush-Seal
Refer to publication 06.04 Approx. With Grade “E” or Grade “E” or “T”
PIPE Wgt. Ea. “T” Gasket Gasket SPARE PARTS
Size Dia. lb Painted Galv. Painted Galv. No.* Inches
¾ 1.050 1.1 $91.50 $120.50 $139.00 $171.50 2 ⅜ x 2
1 1.315 1.2 91.50 120.50 139.00 171.50 2 ⅜ x 2
1¼ 1.660 2.0 117.50 155.50 171.50 210.00 2 ½ x 2½
1½ 1.900 2.1 128.00 165.50 178.50 220.00 2 ½ x 2½
¾ – 12” 2 2.375 2.6 137.00 179.00 186.00 232.00 2 ½ x 2½
2½ 2.875 3.1 159.00 220.00 226.00 286.50 2 ½ x 2¾
3 3.500 3.7 174.50 241.00 232.50 300.50 2 ½ x 2¾
3½ 4.000 5.6 249.50 349.00 334.50 438.50 2 ⅝ x 3¼
4 4.500 6.7 252.00 353.00 335.00 438.50 2 ⅝ x 3¼
5 5.563 10.6 378.00 541.00 581.00 754.00 2 ¾ x 4¼
6 6.625 12.0 446.50 638.00 646.00 846.00 2 ¾ x 4¼
8 8.625 20.8 723.00 1072.50 869.50 1190.50 2 ⅞ x 5
10 10.750 27.8 1175.50 1682.00 1393.50 1872.00 2 1 x 6
12 12.750 31.1 1335.50 1909.50 1636.50 2152.50 2 1 x 6½
14 ‡ 14.000 39.2 1908.50 2631.00 2130.50 2822.50 2 1 x 3½
16 ‡ 16.000 45.0 2500.50 3389.50 2806.50 3714.00 2 1 x 3½
18 ‡ 18.000 64.1 2927.00 4052.50 3293.50 4446.00 2 1⅛ x 4
20 ‡ 20.000 74.8 4595.50 6184.00 5163.50 7187.50 2 1⅛ x 4
14 – 24” 22 ‡ 22.000 82.6 4596.00 6171.50 + + 2 1⅛ x 4
24 ‡ 24.000 89.6 5036.00 6761.50 5811.50 7580.00 2 1⅛ x 4
28 I.D.** 35.500 95.0 + + + + 4 1 x 5½
30 I.D.** 37.880 127.2 + + + + 4 1 x 5½
NOTE: 14 – 24” for cut groove original groove systems only. For 14 – 72” roll groove systems Victaulic offers the
Style W77 coupling.
** Requires Vic-Ring for assembly.
‡ For cut groove systems only. For roll groove systems please see AGS Style W77.

Standard Coupling STYLE 77 – SILICONE GRADE “L” GASKET OR FLUOROELASTOMER GRADE “O” GASKET
COUPLING COUPLING
STYLE 77 COMPLETE † COMPLETE †
Approx. With Silicone With Fluoroelastomer
Refer to publication 06.04 PIPE Wgt. Ea. Grade “L” Gasket Grade “O” Gasket SPARE PARTS
Size Dia. lb Painted Galv. Painted Galv. No.* Inches
¾ 1.050 1.1 $245.50 $274.00 $747.50 $778.50 2 ⅜ x 2
1 1.315 1.2 245.50 274.00 747.50 778.50 2 ⅜ x 2
1¼ 1.660 2.0 364.00 400.50 740.50 779.50 2 ⅜ x 2
1½ 1.900 2.1 382.50 419.50 789.00 826.50 2 ½ x 2½
2 2.375 2.6 267.50 308.50 662.50 705.00 2 ½ x 2½
2½ 2.875 3.1 308.50 367.50 747.50 809.00 2 ½ x 2¾
3 3.500 3.7 335.50 402.00 829.50 896.00 2 ½ x 2¾
3½ 4.000 5.6 + + 856.50 1026.00 2 ⅝ x 3¼
4 4.500 6.7 502.00 602.00 1358.50 1456.00 2 ⅝ x 3¼
5 5.563 10.6 947.50 1107.00 1537.00 1705.00 2 ¾ x 4¼
6 6.625 12.0 1070.00 1261.50 1886.50 2077.00 2 ¾ x 4¼
8 8.625 20.8 1377.50 1721.50 2330.50 2676.50 2 ⅞ x 5
10 10.750 27.8 2047.50 2555.00 3299.50 3806.50 2 1 x 6
12 12.750 31.1 2373.00 2947.00 4564.50 5136.00 2 1 x 6½
NOTE: 14 – 78” standard for this size range is the W77 AGS flexible coupling.
Style L77 Carbon Steel Flexible Coupling
Carbon Steel Flexible STYLE L77 – GRADE “E” OR “T” GASKET, TYPE 316 STAINLESS STEEL HARDWARE

Coupling PIPE Ea. Grade “E” or “T” Gasket Grade “L” Gasket
STYLE L77
SA352 Grade LCC 1½ 1.900 2.3 $387.50 $429.00 + +
Refer to publication 51.01 2 2.375 2.9 467.50 518.50 + +
2½ 2.875 3.4 486.00 540.00 + +
3 3.500 4.1 490.00 544.50 + +
4 4.500 7.4 580.50 650.00 + +
6 6.625 13.3 743.00 838.00 + +
8 8.625 23.1 1101.00 1251.00 + +
10 10.750 30.9 1637.00 1861.00 + +
12 12.750 34.5 1738.50 1986.00 + +

Styles W77/W77B AGS Flexible Coupling
Flexible Coupling AGS STYLES W77/W77B – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
AGS STYLES W77/W77B Approx. With Flush-Seal
PIPE Wgt. Ea. Grade “E” or “T” Gasket SPARE PARTS
inches Price Each Bolt/Nut
Nom. Outside Style Size §
Size Dia. Number lb Painted Galv. Qty. Inches
14 14.000 52.0 $1228.50 $1698.50 2 1 x 5½
16 16.000 62.0 1612.50 2187.50 2 1 x 5½
18 18.000 67.0 1887.00 2615.00 2 1 x 5½
20 20.000 88.0 2520.00 3378.00 2 1⅛ x 5½
22 22.000 102.0 2930.00 3871.50 2 1⅛ x 6
24 24.000 115.0 3249.50 4362.50 2 1⅛ x 5½
26 26.000 215.0 5084.00 + 4 1⅛ x 6
Style W77 Sizes 14 – 24”
28 28.000 230.0 6148.50 + 4 1⅛ x 6
30 30.000 240.0 8526.00 + 4 1¼ x 7
32 32.000 W77 255.0 9352.50 + 4 1¼ x 7
34 34.000 270.0 9791.50 + 4 1¼ x 7
36 36.000 280.0 10029.50 + 4 1¼ x 7
38 38.000 310.0 11074.00 + 4 1¼ x 7
40 40.000 360.0 11992.00 + 4 1½ x 8
42 42.000 380.0 13292.50 + 4 1½ x 8
44 44.000 410.0 13924.00 + 4 1½ x 8
46 46.000 430.0 14155.00 + 4 1½ x 8
Style W77 Sizes 26 – 50” 48 48.000 440.0 14752.00 + 4 1½ x 8
50 50.000 560.0 15672.50 + 4 1½ x 8
52 52.000 960.0 + + 8 1½ x 9½
54 54.000 980.0 + + 8 1½ x 9½
56 56.000 1010.0 + + 8 1½ x 9½
58 58.000 1030.0 + + 8 1½ x 9½
60 60.000 1060.0 + + 8 1½ x 9½
62 62.000 W77B 1140.0 + + 8 1½ x 9½
64 64.000 1160.0 + + 8 1½ x 9½
66 66.000 1190.0 + + 8 1½ x 9½
68 68.000 1270.0 + + 8 1½ x 9½
Style W77B Sizes 52 – 72” 70 70.000 1340.0 + + 8 1½ x 9½
72 72.000 1420.0 + + 8 1½ x 9½

Flexible Coupling AGS STYLES W77/W77B – SILICONE GRADE “L” FLUSH-SEAL™ GASKET
AGS STYLES W77/W77B Approx. With Flush-Seal Silicone
PIPE Wgt. Ea. Grade “L” Gasket SPARE PARTS
inches Price Each Bolt/Nut
Nom. Outside Style Size §
Size Dia. Number lb Painted Galv. Qty. Inches
14 14.000 52.0 $3026.00 $3495.00 2 1 x 5½
16 16.000 62.0 3350.00 3921.50 2 1 x 5½
18 18.000 67.0 3709.50 4310.50 2 1 x 5½
20 20.000 88.0 4261.50 5119.50 2 1⅛ x 5½
22 22.000 102.0 + + 2 1⅛ x 6
24 24.000 115.0 4762.00 5787.50 2 1⅛ x 5½
26 26.000 215.0 + + 4 1⅛ x 6
Style W77 Sizes 14 – 24”
28 28.000 230.0 + + 4 1⅛ x 6
30 30.000 240.0 + + 4 1¼ x 7
32 32.000 W77 255.0 + + 4 1¼ x 7
34 34.000 270.0 + + 4 1¼ x 7
36 36.000 280.0 + + 4 1¼ x 7
38 38.000 310.0 + + 4 1¼ x 7
40 40.000 360.0 + + 4 1½ x 8
42 42.000 380.0 + + 4 1½ x 8
44 44.000 410.0 + + 4 1½ x 8
46 46.000 430.0 + + 4 1½ x 8
Style W77 Sizes 26 – 50” 48 48.000 440.0 + + 4 1½ x 8
50 50.000 560.0 + + 4 1½ x 8
52 52.000 960.0 + + 8 1½ x 9½
54 54.000 980.0 + + 8 1½ x 9½
56 56.000 1010.0 + + 8 1½ x 9½
58 58.000 1030.0 + + 8 1½ x 9½
60 60.000 1060.0 + + 8 1½ x 9½
62 62.000 W77B 1140.0 + + 8 1½ x 9½
64 64.000 1160.0 + + 8 1½ x 9½
66 66.000 1190.0 + + 8 1½ x 9½
68 68.000 1270.0 + + 8 1½ x 9½
Style W77B Sizes 52 – 72” 70 70.000 1340.0 + + 8 1½ x 9½
72 72.000 1420.0 + + 8 1½ x 9½

Flexible Coupling STYLES 75 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
COUPLING COMPLETE † COUPLING COMPLETE †

STYLE 75 Approx. With Grade “E” or “T” With Flush-Seal SPARE
PIPE Wgt. Ea. Gasket Grade “E” or “T” Gasket PARTS
Plated Bolt &
inches Price Each Price Each Nut
Size Dia. lb Painted Galv. Painted Galv. Inches
1 1.315 1.3 $92.00 $113.00 $143.00 $168.00 ⅜ x 2
1¼ 1.660 1.4 93.00 120.50 150.00 178.50 ⅜ x 2
1½ 1.900 1.5 113.00 139.00 163.00 194.50 ⅜ x 2
2 2.375 1.7 137.00 179.00 168.00 201.00 ⅜ x 2
2½ 2.875 1.9 159.00 220.00 201.00 235.50 ⅜ x 2
3 3.500 2.9 174.50 241.00 210.50 253.50 ½ x 2¾
4 4.500 4.1 252.00 353.00 299.00 366.50 ½ x 2¾
5 5.563 5.8 378.00 541.00 506.50 602.50 ⅝ x 3¼
6 6.625 7.0 446.50 638.00 559.00 679.00 ⅝ x 3¼
8 8.625 12.4 723.00 1072.50 928.50 1111.00 ¾ x 4¼
Flexible Coupling STYLE 75 – SILICONE GRADE “L” GASKET
Approx. COUPLING COMPLETE † SPARE

STYLE 75 PIPE Wgt. Ea. With Silicone Grade “L” Gasket PARTS
Refer to publication 06.05 Plated Bolt &
inches Price Each Nut
Size Dia. lb Painted Galv. Inches
1 1.315 1.3 $235.50 $267.00 ⅜ x 2
1¼ 1.660 1.4 338.50 367.00 ⅜ x 2
1½ 1.900 1.5 369.00 395.50 ⅜ x 2
2 2.375 1.7 247.00 274.50 ⅜ x 2
2½ 2.875 1.9 283.50 314.50 ⅜ x 2
3 3.500 2.9 313.50 353.00 ½ x 2¾
3½ 4.000 2.9 + + ½ x 2¾
4 4.500 4.1 466.00 527.50 ½ x 2¾
5 5.563 5.8 871.00 956.50 ⅝ x 3¼
6 6.625 7.0 987.00 1091.00 ⅝ x 3¼
8 8.625 12.9 1216.50 1399.50 ¾ x 4¼

Style 750 Reducing Coupling
Reducing Coupling STYLE 750 – GRADE “E” OR “T” GASKET

STYLE 750 PIPE Wgt. Ea. With Grade “E” or “T” Gasket PARTS
Refer to publication 06.08 Plated Bolt &
Nominal Size Price Each Nut
Size §
inches lb Painted Galv. Inches
2 x 1 2.0 $222.00 $267.00 ⅜ x 2
1½ 2.0 180.00 217.00 ⅜ x 2
2½ x 2 2.9 232.00 289.00 ⅜ x 2
3 x 2 4.6 262.50 332.00 ½ x 2¾
2½ 4.1 229.00 289.00 ½ x 2¾
4 x 2 8.8 414.00 519.50 ⅝ x 3¼
2½ 8.3 371.00 487.50 ⅝ x 3¼
3 6.4 349.00 449.00 ⅝ x 3¼
5 x 4 10.8 466.00 609.50 ¾ x 4¼
6 x 4 16.1 700.50 880.50 ¾ x 4¼
5 12.6 615.50 796.00 ¾ x 4¼
8 x 6 22.3 1044.50 1321.00 ⅞ x 5
10 x 8 32.3 1338.00 1694.50 1 x 6
NOTE: Support rings required on vertical installations. Please specify on order.
A steel assembly washer is optionally available to prevent pipe from telescoping on vertical installations. No extra charge when
specified on order with coupling.
Style 875 Reducing Coupling for Potable Water Applications
Reducing Coupling STYLE 875 – GRADE “P” GASKET
Approx. COUPLING COMPLETE †

for Potable Water PIPE Wgt. Ea. With Grade “P” Gasket SPARE PARTS
Applications Nominal Size Price Each Plated Bolt & Nut
Size
STYLE 875 inches lb Painted Galv. No. Inches
Refer to publication 06.31 2 x 1½ 2.0 $185.00 $223.00 2 ⅜ x 2
2½ x 2 3.1 238.00 297.00 2 ⅜ x 2
3 x 2 4.9 269.50 341.50 2 ½ x 2¾
2½ 4.3 235.50 297.00 2 ½ x 2¾
4 x 2 8.1 425.50 534.00 2 ⅝ x 3¼
2½ 8.6 381.00 501.00 2 ⅝ x 3¼
3 6.7 358.50 461.00 2 ⅝ x 3¼
6 x 4 16.7 720.00 904.50 2 ¾ x 4¼
8 x 6 22.4 1073.00 1357.00 2 ⅞ x 5
10 x 8 31.4 1375.00 1741.50 2 1 x 5½
NOTE: See Spare Parts Section for spare bolt and nut prices.

Style 741 Vic-Flange Adapter
Vic-Flange Adapters STYLE 741 – GRADE “E” OR “T” GASKET
Approx. FLANGE ADAPTER COMPLETE †

STYLE 741 PIPE Wgt. Ea. With Grade “E” or “T” Gasket
inches Price Each
Grooved Pipe Adapters to ANSI Nom. Size Outside Dia. lb Painted Galv.
Class 125 and 150 Flanges STYLE 741 – Hinged
Refer to publication 06.06 2 2.375 3.1 $521.50 $630.50
2½ 2.875 4.8 646.50 796.00
3 3.500 5.3 698.00 861.00
4 4.500 7.4 929.50 1151.50
5 5.563 8.6 1079.50 1334.00
6 6.625 9.9 1176.50 1462.50
8 8.625 16.2 1328.50 1701.50
10 10.750 24.2 2096.50 2663.50
12 12.750 46.8 2740.50 3521.50
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI
CL. 150 and 125 CL. flanges. Flanged Adapter Nipples are also available in ¾” / 26.9 mm and larger sizes in ANSI CL. 125, CL. 150,
CL 300 and other ANSI ratings – quoted on application.
Style 841 Vic-Flange Adapter for Potable Water Applications
Vic-Flange Adapter STYLE 841 – GRADE “P” GASKET

for Potable Water PIPE Wgt. Ea. With Grade “P” Gasket
Applications inches Price Each
Nom. Size Outside Dia. lb Painted Galv.
STYLE 841 2 2.375 3.1 $535.50 $647.50
2½ 2.875 4.8 664.50 818.00
Grooved Pipe Adapters to ANSI
3 3.500 5.3 717.00 884.50
Class 125 and 150 Flanges
Refer to publication 06.32 4 4.500 7.4 955.00 1183.00
6 6.625 9.9 1208.50 1502.50
8 8.625 16.2 1365.00 1748.50
10 10.750 24.2 2154.00 2737.00
12 12.750 46.8 2816.00 3618.50
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI
CL. 150 and 125 CL. flanges. Flanged Adapter Nipples are also available in ¾” / 26.9 mm and larger sizes in ANSI CL. 125, CL. 150,
CL 300 and other ANSI ratings – quoted on application.
† Surcharge for flange adapters supplied without gasket. Contact Victaulic for pricing.

Style W741 AGS Vic-Flange Adapter
Vic-Flange STYLE W741 – GRADE “E”, “T” OR “L” GASKET
FLANGE
Adapters ADAPTER
COMPLETE †
STYLE W741 Approx. FLANGE ADAPTER COMPLETE † With Grade “L”
PIPE Wgt. Ea. With Grade “E” or “T” Gasket Gasket
Grooved Pipe Adapters to ANSI inches Price Each
Class 125 and 150 Flanges. Nom. Size Outside Dia. lb Painted Galv. Price Each
Refer to publication 20.04 14 14.000 70.0 $4766.50 $5863.50 $5105.50
16 16.000 88.0 5531.00 6855.50 5905.00
18 18.000 101.0 6807.50 8674.50 7300.50
20 20.000 115.0 8190.50 10478.50 8752.00
24 24.000 160.0 10478.50 13518.50 11082.50
The AGS Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for
ANSI CL. 150 and 125 CL. flanges.
Vic-Flange Grooved STYLE 743 – GRADE “E” OR “T” GASKET

Flange Adapters § PIPE Wgt. Ea. With Grade “E” or “T” Gasket
inches Price Each
STYLE 743
Nominal Size Outside Diameter lb Painted Galv.
Grooved Pipe Adapters to ANSI 2 2.375 4.8 $651.50 $763.00
Class 300 Flanges (with Style 2½ 2.875 7.4 752.50 897.50
741 gasket) 3 3.500 9.1 1027.50 1216.50
5 5.563 17.7 1553.50 1875.00
6 6.625 23.4 1806.00 2211.00
8 8.625 34.3 2069.00 2607.50
10 10.750 48.3 3292.00 4091.00
12 12.750 70.5 3514.00 4532.50
§ Utilizes standard ANSI 300 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI class 300 flanges.

Vic-Flange Adapter Victaulic flange adapters require a smooth, hard surface at the mating flange face for
Notes effective sealing. Some applications, for which the Victaulic flange adapter is
otherwise well suited, do not provide an adequate mating surface. In such cases, it
is recommended that a metal flange washer be inserted between the Victaulic flange
adapter and the mating flange to provide the necessary sealing surface. See Spare
Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1.When mating to a serrated flange: a flange gasket should be used adjacent to the
serrated flange. The flange washer is then inserted between the Victaulic flange
adapter and the flange gasket.
2.When mating to a wafer valve: where typical valves are rubber lined and partially
rubber faced (smooth or not), the flange washer is placed between the valve and the
Victaulic flange adapter.
3.When mating to a rubber faced flange: the flange washer is placed between the
Victaulic flange adapters and the rubber faced flange.
4.When mating C.I. flanges to IPS flanges: the flange washer is placed between two
Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g. a flanged
valve), then a flanged gasket must be placed adjacent to that flange and the flange
washer must be inserted between the flange gasket and the Victaulic flange adapter.
5.When mating to components (valves, strainers, etc.) where the component flange
face has an insert: follow the same arrangement as in # 1 above.
When ordering Victaulic flange washers, always specify the Vic-Flange Adapter style
number and size to assure the proper flange washer is supplied.
For additional notes regarding Vic-Flange Adapters, refer to publications 06.06, 06.32
and 20.04.

Style 72 Outlet Coupling
Outlet Coupling STYLE 72 – GRADE “E” OR “T” GASKET - FOR STYLE 72 GASKETS SEE BELOW.
SPARE
STYLE 72 Nominal Size OUTLET COUPLING COMPLETE † with Grade “E” or “T” Gasket PARTS
Refer to publication 06.10 NPT Female Thd. Branch Plated Bolt &
Approx. Price Each Nut
inches Wgt. Ea. Size §
Run x Branch lb Painted Galv. Inches
1½ x ½ 1.4 $237.50 $278.50 ⅜ x 2
¾ 2.8 237.50 278.50 ⅜ x 2
1 2.8 237.50 278.50 ⅜ x 2
2 x ½ 3.5 241.00 297.50 ⅜ x 2
¾ 2.5 241.00 297.50 ⅜ x 2
1 3.2 241.00 297.50 ⅜ x 2
2½ x ½ 4.5 369.00 453.50 ½ x 2¾
¾ 4.6 369.00 453.50 ½ x 2¾
1 6.0 369.00 453.50 ½ x 2¾
1¼ 5.0 415.00 527.50 ⅝ x 3¼
1½ 5.0 470.50 586.00 ⅝ x 3¼
3 x ¾ 4.5 355.50 431.50 ½ x 2¾
1 8.9 470.50 586.00 ⅝ x 3¼
1¼ 8.5 536.50 738.00 ⅝ x 3¼
1½ 8.5 536.50 738.00 ⅝ x 3¼
4 x ¾ 6.3 519.50 646.00 ½ x 2¾
1 6.5 519.50 646.00 ½ x 2¾
1½ 11.6 735.00 937.50 ⅝ x 3¼
2 14.6 735.00 937.50 ⅝ x 3¼
6 x 1 19.3 1037.50 1347.50 ¾ x 4¼
1½ 19.3 1037.50 1347.50 ¾ x 4¼
2 19.5 1037.50 1347.50 ¾ x 4¼
Style 72 Outlet Couplings supplied with painted or galvanized housing, Grade “E” or “T” gasket with plated neck insert and
plated bolts and nuts.
Style 78 Snap-Joint™ Coupling
Snap-Joint™ Coupling STYLE 78 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
COUPLING COMPLETE † COUPLING COMPLETE

STYLE 78 Approx. With Grade “E” or “T” With Flush-Seal
PIPE Wgt. Ea. Gasket Grade “E” or “T” Gasket †
(with Style 77 gasket) inches Price Each Price Each
Refer to publication 06.09 Nom. Size Outside Dia. lb Painted Galv. Painted Galv.
1 1.315 0.8 (a) $210.00 $243.00 $222.00 $261.50
1¼ 1.660 1.1 (a) 246.00 295.50 269.00 319.50
1½ 1.900 1.7 (a) 237.50 282.50 247.00 290.50
2 2.375 1.7 (b) 226.50 247.00 238.00 282.50
2½ 2.875 2.5 (b) 249.50 297.50 306.00 366.50
3 3.500 2.8 (b) 289.00 355.00 345.00 417.00
4 4.500 5.5 (b) 369.00 474.00 453.50 564.50
5 5.563 9.8 (c) 747.50 914.00 921.00 1122.50
6 6.625 10.7 (c) 782.50 989.50 977.00 1190.50
8 8.625 15.3 (c) 1197.50 1499.50 1357.00 1670.00
(a) Available with steel toggle locking assembly only.
(b) Supplied with cast handle. Steel toggle locking assembly available upon request.
(c) Available with cast handle only.

Style HP-70 Rigid Coupling
Rigid Coupling STYLE HP-70 – GRADE “E” OR “T” GASKET

STYLE HP-70 PIPE Wgt. Ea. with Grade “E” or “T” Gasket PARTS
Plated
(with Style 77 Flush-Seal™ inches Price Each Bolt & Nut
gasket) Outside Size §
Refer to publication 06.12 Nom. Size Dia. lb Painted Galv. Inches
2 2.375 3.2 $101.00 $136.50 ⅝ x 2¾
2½ 2.875 4.0 116.00 155.50 ⅝ x 3½
3 3.500 4.4 129.00 174.00 ⅝ x 3½
4 4.500 7.5 186.50 265.00 ¾ x 4¼
6 6.625 16.0 335.00 481.50 ⅞ x 5½
8 8.625 26.3 535.00 768.00 1 x 5½
10 10.750 32.8 987.00 1349.50 1 x 6½
12 12.750 42.1 1437.00 1922.00 1 x 6½
14 14.000 64.0 1713.00 2408.50 1¼ x 4½
16 16.000 72.0 2086.50 2878.50 1¼ x 4½
* Style HP-70 Rigid Coupling can be specially ordered with Grade “E” or “T” C-Shape gasket. Contact Victaulic for details.
Style HP-70ES Coupling with “ES” Gasket
EndSeal™ Coupling STYLE HP-70ES – “ES” GASKET
Approx. COUPLING COMPLETE † “ES” Plated

STYLE HP-70ES PIPE Wgt. Ea. With “ES” Gasket Gasket Only Bolt & Nut
inches Price Each Size §
With “ES” Gasket Nom. Size Outside Dia. lb Painted Galv. Price Each Inches
Refer to publication 06.13 2 2.375 3.2 $136.00 $172.00 $88.50 NR ⅝ x 2¾
2½ 2.875 4.0 158.00 204.00 110.00 ⅝ x 3½
3 3.500 4.6 175.50 231.00 119.50 NR ⅝ x 3½
4 4.500 8.2 247.50 334.50 153.00 NR ¾ x 4¼
5 5.563 14.8 389.00 524.00 195.00 ⅞ x 5½
6 6.625 16.4 426.50 570.50 216.00 NR ⅞ x 5½
8 8.625 26.0 657.00 886.50 291.50 NR 1 x 5½
10 10.750 37.2 1228.00 1627.00 471.00 NR 1 x 6½
12 12.750 42.0 1551.50 2194.00 538.00 1 x 6½
For use with cement-lined and plastic-coated pipe where protection at pipe ends is desired.
When EndSeal Couplings (Style HP-70ES) are used, special pipe grooving dimensions are required. See
publication 25.02 for details.
Fittings for use with EndSeal Couplings are of special dimensions and should be specified as “EndSeal Fittings”
when ordering.
NOTE: EndSeal™ Grade “T-607” Nitrile gaskets with HP-70ES couplings may be specified in systems requiring compliance with
API607 fire testing and in foam systems requiring compliance with NFPA 11. Contact Victaulic for pricing and availability.
NR
Non-returnable

Style 808 High Pressure Coupling
High Pressure STYLE 808 – GRADE “HMT” GASKET, STANDARD OR ENDSEAL
COUPLING
with Grade Grade “HMT”
STYLE 808 “HMT” Standard Standard
Refer to publication 15.01 Approx. or EndSeal or EndSeal
PIPE Wgt. Ea. Gasket Gasket Only Plated Bolt & Nut
inches Price Each Size §
Nom. Size Outside Dia. lb Painted Price Each No. Inches
6 6.625 36.0 $3736.00 $267.00 4 1 x 5
8 8.625 70.0 7044.00 417.00 4 1⅛ x 6
10 10.750 85.0 8533.00 553.00 4 1⅛ x 6
12 12.750 105.0 11444.50 + 4 1¼ x 6
Style 808 couplings for double grooved pipe require special pipe double groove dimensions. Contact Victaulic for
details.
Style 809N High-Pressure Coupling for Ring Systems
High-Pressure STYLE 809N – GRADE “HMT” GASKET
COUPLING
Coupling for Ring COMPLETE †
Systems With Grade
“HMT”
Gasket and
STYLE 809N PIPE Rings Spare Parts
Refer to publication 15.03 Grade
Approx. “HMT” Ring
Wgt. Gasket Positioning
inches Ea. Price Each Only Rings Clamps SPARE PARTS
Size Dia. lb Painted Price Each No. Inches
4 4.500 23.0 $786.00 $189.50 NR $44.00 $71.50 NR 4 ¾ x 4¼
6 6.625 50.0 1570.00 267.00 NR 47.50 71.50 NR 4 1 x 5
8 8.625 78.0 2788.50 359.00 NR 54.50 NR
71.50 NR 4 1⅛ x 6
10 10.750 109.0 3224.00 580.50 65.50 71.50 4 1¼ x 6
NOTE: Positioning clamps sold in set of 3 as recommended for installation.
NR
Non-returnable

Style 307 Ductile Iron to IPS Transition Coupling
Transition Coupling STYLE 307 – GRADE “M” OR “S” FLUSH-SEAL™ GASKET
COUPLING
(Ductile Iron to IPS) COMPLETE †
PIPE Approx. With Grade “M” or “S”
STYLE 307 inches Wgt. Ea. Flush-Seal Gasket SPARE PARTS
Refer to publication 23.03 Mating Pipe O.D. Price Each Price Each
Grade
“M” or “S”
Flush-Seal
Nom. AWWA Gasket
Size IPS Steel Ductile lb Painted Galv. Only Bolt & Nut
3 3.500 3.960 6.0 $475.00 $637.00 $203.50 ½ x 2¾
4 4.500 4.800 8.0 544.50 747.50 211.00 ½ x 3¼
6 6.625 6.900 9.0 661.50 897.00 229.00 ⅝ x 3¼
8 8.625 9.050 18.0 822.50 1219.50 253.50 ¾ x 5
10 10.750 11.100 22.0 1054.50 1549.50 440.00 ⅞ x 6½
12 12.750 13.200 31.1 1399.50 2085.50 455.00 ⅞ x 6½
Style 171 Composite Flexible Coupling
Composite Flexible STYLE 171 – GRADE “E2” EPDM GASKET
COUPLING
PIPE With Grade “E2”
STYLE 171 inches Approx. Wgt. Ea. EPDM Gasket SPARE PARTS
Refer to publication 06.22 Nom. Outside
Size Dia. lb Price Each “E2” EPDM Gasket
1½ 1.900 0.8 + +
2 2.375 0.9 $84.50 +
2½ 2.875 1.0 105.50 +
3 3.500 1.6 + +
4 4.500 1.6 + +

Spare Parts
Lubricant
Lubricant LUBRICANT Price Each

PACK
$657.00 NR
With 12 Tubes – 4 Fluid Ounces/120 ml Each
CONTAINER
288.00 NR
One Quart – 32 Fluid Ounces/960 ml Each
To ensure easy assembly and service of all your Victaulic installations including HDPE, be sure to include plenty of Victaulic
Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of
units sold.
NR
Non-returnable
LUBRICANT USAGE GUIDE

Size of Number of Gaskets Size of Number of Gaskets Size of Number of Gaskets
Gasket Gasket Gasket
inches Per Tube Per Quart inches Per Tube Per Quart inches Per Tube Per Quart
2 140 1120 8 31 252 16 11 86
3 97 773 10 25 202 18 10 76
4 71 558 12 21 171 20 9 69
6 49 383 14 12 98 24 7 57
Gaskets
Standard and Special Gaskets

GASKETS FOR ORIGINAL GROOVE SYSTEM (OGS) COUPLING STYLES 07, HP-70, 75, 77, 78, 997, 77S, 475, 489 AND 89
Nom. Size Standard Gaskets Special Gaskets

Flush-Seal Flush-Seal Flush-Seal
Flush-Seal “L” Grade “O” Grade “A” Grade “V”
inches Grade “E” or “T” * Silicone * Fluoroelastomer * White Nitrile Black Neoprene
¾ $67.50 $226.50 $747.50 $203.50 +
1 67.50 226.50 747.50 203.50 +
1¼ 70.50 323.50 716.00 320.00 +
1½ 75.50 337.50 754.00 262.50 +
2 75.50 NR 210.00 618.50 326.00 +
2½ 87.50 NR 243.00 699.00 334.50 +
3 93.00 NR 262.00 771.50 503.50 NR +
3½ 116.00 – + + +
4 116.00 NR 379.00 1262.00 513.00 NR +
4½ 149.50 + + + +
5 149.50 740.50 1351.00 518.50 +
6 160.00 NR 811.00 NR 1657.00 521.50 +
8 217.50 NR 905.00 NR 1894.00 626.50 +
10 271.50 NR 1175.50 NR 2466.50 860.50 +
12 316.00 NR 2073.50 NR 3649.50 1225.50 +
13½ + – – – –
14 477.50 NR 2117.00 + 3968.50 +
16 658.50 NR 2192.00 + + +
18 1180.50 3562.50 + + +
20 1812.00 3922.50 + + +
22 1812.00 – + + +
24 2496.50 3990.00 + + +

* Replacement gaskets for Original Groove System (OGS) coupling styles 07, HP-70, 75, 77, 78, 997, 77S, 475, 489, 89 can be specially ordered as Grade “E” , “T”, “O”, and “L” C-Shape
gaskets. Contact Victaulic for details.
NR
Non-returnable

Spare Parts
AGS Gaskets GASKETS FOR ADVANCED GROOVE SYSTEM (AGS) COUPLING STYLES W07 AND W77
Nom. Size Flush-Seal Grade “L”

inches Grade “E” or “T” Gasket Silicone Gasket
14 $431.50 NR $2522.00
16 560.50 NR 2558.50 NR
18 716.00 NR 2835.50
20 1095.00 NR 3119.50
24 1431.00 NR 2996.00
26 1764.00 NR +
28 1886.50 NR +
30 2008.50 NR +
32 2129.00 NR +
34 + +
36 2364.50 NR +
40 2613.00 NR +
42 2733.00 NR +
44 + +
46 2927.50 NR +
48 2883.00 NR +
54 + +
56 + +
60 + +
72 + +
NOTE: Prices shown for 26 – 48” painted are for the Grade “E” EPDM gasket only. For pricing on Grade “T” nitrile gaskets contact
Victaulic.
NR
Non-returnable
Grade “T” Type A FOR STYLES 07, 75, AND 77 COUPLINGS AND 741 FLANGE ADAPTERS
Grade “T” Type A

Gaskets Nom. Size Nitrile
inches Price Each
1¼ +
1½ +
2 +
2½ +
3 +
4 +
6 +
8 +
10 +
12 +
NOTE: The Grade “T” Type A gasket is for use with Style 07, 77, 75 couplings and Style 741 Flange Adapters in compliance with
ISO 19921:2005(E) for marineapplications only.

Spare Parts
Style 750 Gaskets STANDARD “E” OR “T” GASKETS FOR STYLE 750
Nom. Size Price Each

NOTE: inches Grade “E” or “T”
For pricing couplings complete with any 2 x 1 $70.50
special gaskets, contact Victaulic .
Gasket guidelines can be found in the 1½ 70.50 NR
latest Victaulic Gasket Selection Guide 2½ x 2 91.50 NR
(publication 05.01). This information is
general in scope and Victaulic should be 3 x 2 102.00
consulted for guidelines when a question
arises. 2½ 102.00
4 x 2 117.50
2½ 120.00
3 123.00 NR
5 x 4 142.50 NR
6 x 4 160.50
5 174.50 NR
8 x 6 194.50 NR
10 x 8 232.50
NR
Non-returnable
Style 875 Gaskets GRADE “P” GASKET FOR STYLE 875
Nom. Size Price Each

NOTE: inches Grade “P”
For pricing couplings complete with any 2 x 1½ $70.50 NR
special gaskets, contact Victaulic .
Gasket guidelines can be found in the 2½ x 2 91.50 NR
latest Victaulic Gasket Selection Guide 3 x 2 102.00
general in scope and Victaulic should be 2½ 102.00
consulted for guidelines when a question
arises. 4 x 2 117.50
2½ 120.00
3 123.00 NR
6 x 4 160.50
8 x 6 194.50 NR
10 x 8 232.50
NR
Non-returnable

Spare Parts
Flange Parts – Styles 741, 841, W741, 743 and 441
Flange Parts FOR STYLES 741, 841, W741, 743 & 441 VIC-FLANGE ADAPTERS
Flange Size BOLT AND NUT FLANGE WASHERS

FOR STYLE 741, 841, W741, 743 Styles 741
& 441 VIC-FLANGE ADAPTERS Price & 841 304
Refer to publication 06.06, Qty. Size Per Set Style 741 Stainless
inches Per Set inches Plated ANSI Plated Steel Style 743
section 6.0 Notifications for
Flange Washers considerations. 2 4 ⅝ x 3 + $186.50 NR + +
2½ 4 ⅝ x 3 + 196.50 NR + +
3 4 ⅝ x 3 + 230.00 NR + +
4 8 ⅝ x 3 + 267.00 NR + +
5 8 ¾ x 3½ + 320.00 NR + +
6 8 ¾ x 3½ + 367.00 NR + +
8 8 ¾ x 3½ + 461.50 NR + +
10 12 ⅞ x 4 + 637.50 NR + +
12 12 ⅞ x 4 + 929.50 NR + +
14 12 1 x 4½ + 1012.50 NR – –
16 16 1 x 4½ + 1795.50 NR – –
18 16 1⅛ x 4¾ + 1915.50 NR – –
20 20 1⅛ x 5¼ + + – –
24 20 1¼ x 5¾ + + – –
14 – 24” flange parts supplied for Style W741 AGS Flange
NR
Non-returnable
Flange Gaskets – Styles 741, 841, W741, 743 and 441
Flange Gaskets FOR STYLE 741, 841, W741, 743 & 441 VIC-FLANGE ADAPTERS
Standard Gaskets Special Gaskets

FOR STYLE 741, 841, W741, 743 Flange Size Price Each Price Each
& 441 VIC-FLANGE ADAPTERS Style 741/743 Style 841 Style 741
Grade “E” or “T” Grade “P” Style 741/743 Grade “O”
inches Gasket Only Gasket Only Grade “L” Silicone Fluoroelastomer
2 $62.00 NR $63.50 $380.50 $914.00
2½ 71.50 NR 73.50 402.50 1072.50
3 77.00 NR 79.00 377.50 1322.00
4 98.50 NR 101.00 474.50 1322.00
5 117.50 NR – 1346.50 1602.50
6 131.00 NR 134.50 602.00 1348.00
8 174.50 NR 179.50 952.50 2213.00
10 222.00 NR 228.00 1632.00 3808.00
12 257.00 NR 264.00 1720.50 4229.00
14 299.50 NR – 670.50 –
16 332.50 NR – 742.50 –
18 482.50 NR – 1021.50 –
20 519.50 NR – 1134.50 –
24 577.50 NR – 1239.00 –
14 – 24” flange gaskets supplied for Style W741 AGS Flange
NR
Non-returnable

Spare Parts
Style 72 Outlet Coupling Gaskets
Style 72 Gaskets STANDARD “E” OR “T” GASKET FOR STYLE 72
Nom. Size Nom. Size

inches Price Each inches Price Each
NOTE:
For pricing couplings complete with any Run x Brch. Gasket Only Run x Brch. Gasket Only
special gaskets, contact Victaulic.
Gasket guidelines can be found in the
1½ x ½ $114.00 3 x ¾ $191.50
latest Victaulic Gasket Selection Guide ¾ 114.00 1 269.50
general in scope and Victaulic should be 1 114.00 1¼ 269.50
consulted for guidelines when a question 2 x ½ 116.00 1½ 269.50
arises.
¾ 116.00 4 x ¾ 269.50
1 116.00 1 269.50
2½ x ½ 235.50 1¼ +
¾ 235.50 1½ 416.00
1 235.50 2 416.00
1¼ 262.00 6 x 1 544.50
1½ 262.00 1½ 544.50
2 544.50

M-2 GASKETS
Nominal Size Grade “M-2”

inches Gaskets
1½ +
2 +
2½ +
3 +
4 +
6 +
8 +
Metal Liners – Styles 77, 75 and 78 Couplings
Metal Liners STYLES 77, 75 AND 78 COUPLINGS
Nom. Size Nom. Size

STYLES 77, 75 AND 78 inches Price Each inches Price Each
COUPLINGS 2 + 12 +
2½ + 14 +
(Type 304 Stainless Steel) 3 + 16 +
4 + 18 +
5 + 20 +
6 + 24 +
8 +
10 +


Spare Parts
Plated Trackhead Bolts and Nuts
Plated Trackhead PLATED TRACKHEAD BOLTS AND NUTS
Bolt and Nut Size Bolt and Nut Size

Bolts and Nuts inches Price Each inches Price Each
⅜ x 2 $35.00 NR 1 x 3½ $93.00 NR
½ x 2½ 39.00 NR 5 87.50
2¾ 39.00 NR 5½ 107.00 NR
3 39.00 6 107.00 NR
3¼ 39.00 6½ 113.00 NR
⅝ x 2¾ 43.50 1⅛ x 4 143.00 NR
3¼ 43.50 NR 5½ 143.00 NR
3½ 45.50 NR 1¼ x 3½ 412.50
4 57.00 5½ 412.50
5 70.50 1⅜ x 5¾ 477.50
¾ x 4¼ 50.50 NR 1½ x 4½ 455.00
5 66.00 NR 5¾ 512.50
⅞ x 5 87.00 NR 1¾ x 6 893.50
5½ 92.50 NR 1⅞ x 6 1182.00
6½ 107.00 NR

NR
Non-returnable
Style 107V QuickVic™ Rigid Coupling Bolts and Nuts
Style 107V QuickVic™ NYLON COATED BOLTS AND NUTS FOR STYLE 107V COUPLINGS
Bolt and Nut Size

Rigid Coupling Bolts inches Price Each
and Nuts ⅜ x 2½ $62.00
½ x 3 57.00
3¼ 67.50
⅝ x 3¼ 67.50
4 82.00 NR
¾ x 5 150.00
NR
Non-returnable
Installation-Ready™ Bolts and Nuts
Installation-Ready™ NYLON COATED BOLTS AND NUTS FOR STYLES 107N, 177N AND 607
Bolt and Nut Size

Bolts and Nuts inches Price Each
⅜ x 2½ $62.00
½ x 3 57.00
3¼ 67.50
⅝ x 3¼ 67.50
4 82.00 NR
¾ x 5 150.00
NR
Non-returnable

Spare Parts
Go/No-Go Tape
Go/No-Go Tape Tool Model Part Number Purchase Price

PT-100-A Imperial Go/No-Go Grooved
RW75-100-MCH $125.00
Pipe Diameter Tape Each
Box of 6 RW75-100-KIT 675.50
Pressure Gauge
Pressure Gauge Nominal Size Victaulic

inches Part Code Price Each
2½ P024386001 $65.00
4 P040386001 74.00

Grooved IPS Pipe Fittings
Elbows –
No. V10 – 90° and No. V11 – 45° QuickVic™

QuickVic™ Elbows ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. V10 45° Elbow No. V11
Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
inches lb Painted Galv. lb Painted Galv.
2 1.5 $45.00 $61.00 1.2 $45.00 $61.00
2½ 2.2 52.50 71.00 1.7 52.50 71.00
3 2.9 82.50 111.50 2.3 82.50 111.50
4 4.4 101.00 136.50 3.7 101.00 136.50
6 10.8 157.50 213.00 7.4 157.50 213.00
8 25.4 237.50 321.00 18.9 160.00 216.00
10 41.0 256.50 346.50 25.0 166.50 225.00
12 66.3 368.00 497.00 35.9 260.50 352.00
No. V10
No. V11
No. 10 – 90° and No. 11 – 45°
Elbows ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 10 45° Elbow No. 11

Wgt. Ea. Wgt. Ea.
¾ 0.5 $297.50 $313.50 0.5 $297.50 $313.50
1 0.6 160.00 210.50 0.6 160.00 201.50
No. 10 1¼ 1.0 160.00 210.50 0.9 160.00 201.50
1½ 1.2 160.00 210.50 0.9 160.00 201.50
2 1.8 160.00 210.50 1.3 160.00 201.50
2½ 3.2 160.00 210.50 2.1 160.00 201.50
3 4.5 279.50 349.00 3.1 279.50 329.00
No. 11
3½ 5.6 322.50 426.00 4.3 322.50 426.00
4 7.1 304.00 424.50 5.6 304.00 393.00
4½ 10.0 (sw) + + 6.0 (sw) + +
5 11.7 719.00 929.00 8.3 719.00 891.50
6 17.2 845.00 1117.00 10.8 845.00 1065.50
8 29.9 1754.00 2308.50 20.4 1754.00 2199.00
10 63.3 3242.50 4053.00 37.5 2104.00 2630.00
12 74.0 3566.00 4458.50 66.7 2524.50 3157.50
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

No. V15F ANSI Class 150 Flanged Elbow (Flat Face), No. V15R ANSI Class 150 Flanged Elbow (Raised Face)
QuickVic™ 90° Elbow 90° ELBOW FLANGED ADAPTER MODULES – ANSI CLASS 150
ANSI Class 150 No. V15F (Flat Face) No. V15R (Raised Face)
Flanged Adapter Approx. Module Complete with Grade Module Complete with Grade
Modules Nom. Size Wgt. Ea. “EHP” Gasket “EHP” Gasket
Price Each Price Each
NO. V15 – ANSI CLASS 150 inches lb Painted Galv. Painted Galv.
Refer to publication 07.14 2 10.2 $266.50 $328.50 $266.50 $328.50
2½ 14.9 327.00 409.00 327.00 409.00
3 18.1 379.00 477.00 379.00 477.00
4 27.7 495.50 625.50 495.50 625.50
6 45.4 657.00 779.50 657.00 779.50
8 82.4 801.50 1043.50 801.50 1043.50
10 129.8 1147.00 1478.00 1147.00 1478.00
12 183.2 1532.00 1992.50 1532.00 1992.50
No. V16F ANSI Class 300 Flanged Elbow (Flat Face), No. V16R ANSI Class 300 Flanged Elbow (Raised Face)
QuickVic™ 90° Elbow 90° ELBOW FLANGED ADAPTER MODULES – ANSI CLASS 300
ANSI Class 300 No. V16F (Flat Face) No. V16R (Raised Face)
Flanged Adapter Approx. Module Complete with Grade Module Complete with Grade
Modules Nom. Size Wgt. Ea. “EHP” Gasket “EHP” Gasket
NO. V16 – ANSI CLASS 300 inches lb Painted Galv. Painted Galv.
Refer to publication 07.14 2 12.4 $321.50 $385.00 $321.50 $385.00
2½ 16.9 372.00 452.00 372.00 452.00
3 22.9 519.00 628.00 519.00 628.00
4 36.6 680.50 838.50 680.50 838.50
6 65.4 924.50 1152.00 924.50 1152.00
8 111.4 1116.00 1428.50 1116.00 1428.50
10 166.6 1654.50 2084.00 1654.50 2084.00
12 241.4 1860.50 2422.00 1860.50 2422.00
No. W10 – AGS 90°, No. W11 – AGS 45°
AGS Elbows AGS ELBOWS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. W10 45° Elbow No. W11
Wgt. Ea. Wgt. Ea.
10 LIC
o.W AU
T
VIC
14 150.8 $3275.00 $4249.50 63.0 $2452.50 $3171.00

N
16 184.3 4252.00 5500.00 93.8 2760.50 3426.50

No. W10 18 272.3 5396.50 6724.50 129.0 3235.50 3965.00
20 312.0 7112.00 8824.50 165.3 4249.50 5208.50
24 559.8 10298.50 12819.00 246.0 6524.00 7950.00
No. AULIC
W11
VICT
NOTE: AGS products must NOT be used on pipe that has been grooved using Original Groove System (OGS) roll sets.
No. W11 (sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.

No. 12 – 22½°, No. 13 – 11¼°
Elbows ELBOWS – 22½° ELBOW OR 11¼° ELBOW
Nom. Size 22½° Elbow No. 12 11¼° Elbow No. 13

Wgt. Ea. Wgt. Ea.
1 0.6 ‡ $990.50 $1022.50 0.3 (sw) $397.00 +
1¼ 0.8 174.00 220.00 0.5 174.00 $220.00
No. 12
1½ 0.8 174.00 220.00 0.5 174.00 220.00
Gooseneck
2 1.4 ‡ 174.00 220.00 1.0 174.00 220.00
2½ 2.3 ‡ 174.00 220.00 1.5 174.00 220.00
3 3.1 ‡ 249.50 311.50 2.1 249.50 308.50
3½ 4.0 (sw) 577.50 770.00 2.7 (sw) 577.50 681.00
No. 12
Standard 4 5.6 328.00 424.50 3.6 304.00 402.00
5 7.8 (sw) 995.50 1199.00 5.0 (sw) 995.50 1170.00
6 12.2 ‡ 912.00 1159.50 7.0 912.00 1100.00
8 20.0 ‡ 1894.00 2352.50 10.1 1620.00 1923.00
No. 13 10 30.0 2498.00 3243.00 11.8 2333.50 2783.50
12 40.0 3374.50 4184.00 29.3 3374.50 4086.00
‡ Gooseneck design.
No. W12 – AGS 22½°, No. W13 – AGS 11¼°
AGS Elbows AGS ELBOWS – 22½° ELBOW OR 11¼° ELBOW
Nom. Size 22½° Elbow No. W12 11¼° Elbow No. W13
Wgt. Ea. Wgt. Ea.
14 46.0 $1832.00 $2425.50 32.0 $1658.00 $2201.00
No. W12 16 58.0 2196.50 3076.00 42.0 2041.00 2878.00
18 65.0 2659.50 3773.00 53.2 2470.50 3543.50
20 78.6 3339.00 5551.00 65.0 3023.50 4432.00
24 140.0 5695.50 6586.50 60.0 5582.00 5631.00
No. W13 26 122.0 + + 92.0 + +
28 136.0 + + 104.0 + +
30 151.0 + + 112.0 + +
32 167.0 + + 124.0 + +
36 194.0 + + 140.0 + +
40 322.0 + + 234.0 + +
42 348.0 + + 246.0 + +
46 392.0 + + 280.0 + +
48 420.0 + + 303.0 + +
54 592.0 + + 437.0 + +
56 627.0 + + 465.0 + +
60 698.0 + + 512.0 + +
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.

No. 100 and No. 110 1½ D Long Radius Elbows
Long Radius – LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
1½ D Elbows Approx. Price Each Approx. Price Each
Refer to publication 07.01 Wgt. Ea. Wgt. Ea.
2 2.5 $358.50 $469.50 1.8 $311.50 $393.00
2½ 3.4 448.00 513.00 2.8 987.00 1110.00
3 6.0 358.50 469.50 4.9 311.50 393.00
4 12.3 531.00 709.50 7.3 378.00 500.50
5 18.0 2678.50 3071.00 14.8 (sw) 2489.50 2732.50
No. 100 6 30.4 1535.00 2014.50 17.4 1101.00 1411.50
8 66.0 3663.50 4682.50 36.0 1913.00 2486.50
10 107.0 4212.00 5265.50 57.0 2582.00 3227.50
12 156.0 4635.00 5792.50 90.0 3487.00 4358.50
* See pages 1-67 – 1-71 for long radius 3-D, 5-D and 6-D bends.
No. 110
No. L100 and L110 Carbon Steel Long Radius Elbows
Carbon Steel Long CARBON STEEL – 90° LONG RADIUS ELBOW NO. L100 OR 45° LONG RADIUS ELBOW NO. L110
Nom. Size 90° Long Radius Elbow No. L100 45° Long Radius Elbow No. L110
Radius Elbows Approx. Wgt. Price Each Approx. Wgt. Price Each
Ea. Ea.
SA352 Grade LCC inches lb Painted Galv. lb Painted Galv.
Refer to publication 51.01 1½ † 1.8 $269.00 $308.50 1.3 $269.00 $309.50
2† 3.6 350.00 402.50 2.1 350.00 402.50
2½ † 6.9 431.50 496.00 4.0 431.50 496.00
3† 8.2 491.50 595.50 5.8 491.50 591.00
4 12.0 624.50 718.00 7.7 624.50 718.00
6 31.0 1694.00 1948.50 18.0 1694.00 1948.50
8 65.0 3368.00 4128.50 49.0 3668.00 4218.50
10 * 130.0 + + 78.0 + +
12 * 192.0 + + 95.0 + +
No. L100 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Carbon steel wall thickness is standard weight unless otherwise noted.
Fittings are cast unless otherwise noted.
† Schedule 80 wall thickness. For other wall thickness options, contact Victaulic.
* ASTM A420 WPL6 wrought fitting with A333 Grade 6 tangents. Contact Victaulic for cast options.
No. L110

No. W100 and W110 1½ D AGS Long Radius Elbow
AGS Long Radius – AGS LONG RADIUS – 90° LONG RADIUS ELBOW LW100 OR 45° LONG RADIUS ELBOW NO. LW110
Nom. Size 90° Long Rad. Elbow No. W100 45° Long Rad. Elbow No. W110
1½ D Elbows Approx. Price Each Approx. Price Each
14 210.4 $4367.00 $5664.00 105.9 $3270.00 $4185.00
10 LIC
o.W AU
16 274.8 5667.50 7331.00 137.4 3679.00 4567.00

T
VIC
N
18 383.9 7194.00 8966.00 191.6 4313.00 5286.50

No. W100 20 474.3 9480.50 11764.00 237.1 5664.00 6962.50
24 746.6 13729.00 17090.50 373.3 8602.50 10598.50
26 877.0 + + 421.0 + +
No. AULIC
0
28 1019.0 + + 491.0 + +
W11
VICT
30 1268.0 + + 612.0 + +
No. W110 32 1517.0 + + 733.0 + +
36 1925.0 + + 935.0 + +
40 2883.0 + + 1397.0 + +
42 3260.0 + + 1583.0 + +
46 3260.0 (sw) + + 1210.0 (sw) + +
48 2471.0 (sw) + + 1314.0 (sw) + +
54 3120.0 (sw) + + 1648.0 (sw) + +
56 3355.0 (sw) + + 1769.0 (sw) + +
60 3850.0 (sw) + + 2023.0 (sw) + +
No. LW100 and LW110 Carbon Steel AGS Long Radius Elbow
Carbon Steel CARBON STEEL AGS LONG RADIUS – 90° LONG RADIUS ELBOW OR 45° LONG RADIUS ELBOW
Nom. Size 90° Long Radius Elbow No. LW100 45° Long Radius Elbow No. LW110
AGS Long Radius Approx. Wgt. Price Each Approx. Wgt. Price Each
Elbows Ea. Ea.
SA352 Grade LCC 14 273.0 + + 144.0 + +
Refer to publication 51.01 16 366.0 + + 208.0 + +
No. LW100
No. LW110

No. R-10G and No. R-10F Reducing Base Support Elbow
Reducing Base REDUCING BASE SUPPORT ELBOWS – GROOVED X GROOVED OR GROOVED X FLANGED
Nom. Size Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F
Support Elbows Approx. Price Each Approx. Price Each
Refer to publication 07.01 inches Wgt. Each Wgt. Each
Inlet x Outlet lb Painted Galv. lb Painted Galv.
4 19.0 $2551.50 $2993.50 33.0 $2831.50 $3398.00
6 x
5 23.0 2887.50 + 38.0 3206.50 +
8 x 6 33.0 3874.50 4571.00 52.0 4304.00 +
10 x 8 61.0 5586.00 6653.50 88.0 6205.00 +
No. R-10G
Grooved x Grooved
No. R-10F
Grooved x Flanged
No. 100F & No. 100G Base Support Elbow
Base Support Elbows BASE SUPPORT ELBOWS – GROOVED X FLANGED OR GROOVED X GROOVED
Nom. Size Grooved x Flanged No. 100F (Flat Face) Grooved x Grooved No. 100G
Approx. Approx.
Wgt. Each Price Each Wgt. Each Price Each
inches lb Painted lb Painted
3 18.3 $1145.50 8.4 $448.00
4 26.6 1592.50 12.8 664.00
6 43.5 3094.00 28.4 1918.50
8 73.5 5907.50 49.5 4580.00
10 127.2 7361.00 90.8 5265.50
12 197.1 8533.50 148.1 5794.00
No. 100G

No. R100F & No. R100G Reducing Base Support Elbow
Reducing Base REDUCING BASE SUPPORT ELBOWS – GROOVED X FLANGED OR GROOVED X GROOVED
Grooved x Flanged No. R100F

Support Elbows Nom. Size (Flat Face) Grooved x Grooved No. R100G
Refer to publication 07.13 Approx. Approx.
Wgt. Each Price Each Wgt. Each Price Each
inches lb Painted lb Painted
2 13.1 $969.50 8.3 $969.50
3 x
2½ 17.8 1094.50 8.7 1094.50
2 15.8 1243.50 – –
4 x 2½ 21.6 1310.00 – –
3 25.4 1360.50 13.8 1360.50
5 x 4 34.0 3607.00 20.5 3607.00
3 31.6 2615.50 – –
6 x 4 35.1 2847.00 – –
No. R100F 5 37.5 2997.50 – –
4 52.6 5508.00 – –
8 x 5 55.7 5659.00 – –
6 60.2 5755.50 – –
6 92.6 6441.00 – –
10 x
8 113.3 6592.50 – –
8 152.5 7121.00 – –
12 x
10 173.8 7889.50 – –
No. 10-DR Drain Elbow
Drain Elbow DRAIN ELBOW
Nom. Size Approx.

NO. 10-DR Wgt. Ea. Price Each
Refer to publication 10.05 inches lb Painted Galv.
2½ 5.2 $369.00 $474.00
3 5.3 471.00 561.50
USA
4 8.8 477.00 647.00

6 18.7 835.00 1187.50
No. V20 Tee
QuickVic™ Tee STANDARD TEE
Approx. Tee
Refer to publication 07.14 Nom. Size Wgt. Ea. No. V20
Price Each
inches lb Painted Galv.
2 2.1 $70.50 $95.50
2½ 2.2 78.00 105.50
3 4.8 99.00 134.00
4 6.0 169.50 229.00
6 20.0 254.00 343.00
No. V20 8 36.9 287.50 388.50
10 63.6 306.50 414.00
12 90.3 520.50 703.00

No. 20 Tee, No. 29M Tee with Threaded Branch
Tees TEES – STANDARD TEE OR TEE WITH THREADED BRANCH
Approx. Tee Tee with Male Threaded Branch

Refer to publication 07.01 Nom. Size Wgt. Ea. No. 20 No. 29M
inches lb Painted Galv. Painted Galv.
¾ 0.6 $318.50 $343.50 $625.50 $701.50
1 1.0 246.00 319.50 – –
No. 20 1¼ 1.5 246.00 319.50 512.00 600.50
1½ 2.0 246.00 319.50 796.00 936.50
2 3.0 246.00 319.50 512.00 600.50
2½ 4.3 246.00 319.50 – –
3 6.8 335.50 459.00 – –
No. 29M 3½ 7.9 (sw) 1351.00 + + +
4 11.3 509.50 691.00 1053.50 1447.00
4½ 15.0 (sw) + + – –
5 17.8 1182.50 1499.50 3020.00 +
6 25.7 1364.00 1860.00 2697.00 3174.00
8 47.6 2984.00 3914.00 + +
10 99.0 3878.50 4847.00 + +
12 133.0 5042.00 6301.00 + +
No. L20 Tee Carbon Steel Tee
Carbon Steel Tee NO. L20 TEE – CARBON STEEL
Nom. Size Approx. Wgt. Ea. Tee No. L20

SA352 Grade LCC Price Each
1½ † 2.4 $275.50 $316.50
2† 3.7 362.50 417.00
2½ † 6.6 450.50 517.50
3† 9.2 517.50 597.00
4 11.7 532.50 790.00
6 35.9 687.00 2153.00
8 65.6 1872.50 4593.00
No. L20 10 * 136.0 3993.50 +
12 * 151.0 + +

No. W20 AGS Tee
AGS Tees NO. W20 AGS STANDARD TEE
Approx. Tee
Refer to publication 20.05 Nom. Size Wgt. Ea. No. W20
Price Each
VICTAULIC

No.W20
14 102.0 $4142.50 $5158.00

No. W20 16 123.5 4678.00 5940.50
18 281.0 5845.50 7538.00
20 350.0 8376.50 10619.00
24 503.7 12768.50 16561.00
26 634.0 + +
28 741.0 + +
30 855.0 + +
32 1190.0 + +
36 1608.0 + +
38 1496.0 + +
40 1968.0 + +
42 2891.0 + +
46 2620.0 + +
48 3805.0 + +
54 3656.0 + +
56 3961.0 + +
60 4325.0 + +
No. LW20 AGS Carbon Steel Tee
AGS Carbon NO. LW20 AGS CARBON STEEL TEE
Nom. Size Approx. Wgt. Ea. Tee No. LW20

Steel Tee Price Each
SA352 Grade LCC
14 170.0 + +
16 278.0 + +
No. LW20

No. 35 Cross, No. 33 True Wye
Cross and Wye CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE WYE
Steel Cross Steel 90 True Wye

Refer to publication 07.01 Nom. Size No. 35 No. 33
Wgt. Ea. Wgt. Ea.
¾ 0.9 + + 0.7 + +
1 1.3 $589.00 $679.00 1.1 $900.00 +
1¼ 2.1 706.00 822.50 1.5 900.00 +
No. 35
1½ 2.5 761.50 882.00 1.8 900.00 $1070.00
2 3.8 435.50 519.00 2.5 900.00 1070.00
2½ 6.1 435.50 519.00 4.3 900.00 1070.00
3 10.5 773.50 944.50 6.1 1074.00 1276.50
3½ 11.5 1549.50 1846.50 9.6 + +
No. 33 4 15.8 1278.50 1573.00 9.8 1407.50 1689.50
4½ 18.5 + + – – –
5 20.0 2604.50 3137.50 15.0 2011.50 2414.50
6 28.0 3339.50 4054.00 22.3 2481.50 3022.50
8 48.0 4398.50 5442.00 36.0 3572.00 4388.50
10 121.5 7214.50 8924.50 69.9 5930.00 7263.50
12 110.0 10411.00 12968.50 80.0 6549.50 8282.00
No. W35 AGS Cross, No. W33 AGS True Wye
AGS Cross and AGS CROSS AND WYE – STEEL CROSS OR STEEL 90 TRUE WYE
Steel Cross (sw) Steel 90 True Wye (sw)

Wye Nom. Size No. W35 No. W33
Refer to publication 20.05 Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W35
14 168.0 $5693.50 $7790.00 114.0 $3718.00 $4640.50
16 216.0 8208.00 94745.00 144.0 5469.00 6170.00
18 278.0 9460.00 11569.00 185.0 6375.50 7354.50
20 348.0 11948.50 17177.00 216.0 8530.50 9975.50
No. W35 24 488.0 17356.50 24223.50 343.0 14373.00 15146.00
33 IC
L
o.W U
N TA
VIC
No. W33

No(s). 40, 42, and 43 Adapter Nipples
Adapter Nipples ‡ ADAPTER NIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED
Nom. Size Price Per Length – inches

Same prices apply for: inches 3 4 6 8 10 12
No. 40 ¾ $98.50 $98.50 + + + +
Grooved x Threaded 1 98.50 98.50 $153.00 + + +
No. 42 1¼ 98.50 98.50 153.00 + + +
Grooved x Beveled 1½ 98.50 98.50 153.00 $175.50 $202.00 $231.00
No. 43
Grooved x Grooved 2 98.50 98.50 153.00 175.50 202.00 231.00
Refer to publication 07.01 2½ 113.00 113.00 203.00 203.00 237.50 269.00
3 137.00 137.00 219.00 262.00 306.00 347.50
4 221.00 221.00* 221.00 360.50 424.50 487.50
5 451.50* 451.50* 451.50 627.50 773.50 889.00
No. 40 6 578.00 578.00* 578.00* 746.00 866.50 983.50
8 647.00* 647.00* 647.00* 859.00 1179.50 1322.50
10 835.00* 835.00* 841.00* 905.00 1393.50 1657.50
12 1133.50* 1133.50* 1069.50* 1133.50 1763.50 2099.50
No. 42
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal
sizes 8” and larger, from Schedule 30 pipe.
NOTE: For Pump Package Nipples with 1 ½” hole cut to receive Style 923 Strapless Outlet or Style 924 Thermometer Outlet
add $214.50 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-
No. 43 cancellable and non-returnable.
* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.
GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.
‡ Contact Victaulic for pricing on seamless adapter nipples.
No(s). W42, W43 and W49 AGS Adapter Nipples
AGS Adapter AGS ADAPTER NIPPLES –

NO. W42 AGS GROOVED X BEVELED,
NO. W43 AGS GROOVED X AGS GROOVED, OR
Nipples NO. W49 AGS GROOVED X ORIGINAL GROOVED
Approx.
Same prices apply for: Nom. Size Length Wgt. Ea.
No. W42 inches inches * lb Price Each
AGS Grooved x Beveled 14 8 36.0 $962.00
No. W43 16 8 42.0 1097.50
AGS Grooved x AGS Grooved 18 8 47.0 1497.50
No. W49
20 8 52.0 1684.50
AGS Grooved x Original
Grooved 24 8 63.0 1873.50
Refer to publication 20.05 26 12 104.0 +
28 12 112.0 +
30 12 120.0 +
32 12 128.0 +
No. W42 36 12 190.0 +
40 12 211.0 +
42 12 222.0 +
46 12 243.0 +
No. W43 48 12 254.0 +
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
Please specify nipple style number when ordering.
No. W49 Unless otherwise specified, Adapter Nipples are constructed using standard wall pipe.
* Other lengths available. Contact Victaulic for details.
NOTE: For original roll grooved 14 – 24” adapters please contact your local Victaulic sales representative.

No. 80 Female Threaded Adapter
Female Threaded FEMALE THREADED ADAPTER
Approx. No. 80
Adapter Nom. Size Wgt. Each Price Each
¾ 1.0 $811.00 $897.00
1 1.0 868.50 931.50
1¼ 1.5 (sw) 461.00 515.50
No. 80 1½ 1.5 (sw) 595.00 634.50
2 1.4 284.00 332.00
2½ 1.5 284.00 332.00
3 2.9 328.00 400.50
4 4.5 499.50 626.50
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
No(s). 18 and 19 Adapter Elbows
Adapter Elbows ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Wgt. Ea. Wgt. Ea.
¾ 0.5 $406.50 $431.50 0.5 $414.00 $438.50
1 0.5 274.00 337.50 0.6 – –
1¼ 0.9 306.00 337.50 0.6 – –
No. 18 1½ 1.1 388.50 450.50 0.9 448.00 477.00
2 2.5 274.00 337.50 1.9 – –
2½ 3.0 472.00 515.50 2.3 461.00 475.00
3 5.8 438.50 535.50 5.0 782.50 840.00
6 17.6 1346.50 1701.50 12.7 1637.50 1819.50
No. 19 NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

No. 25 Grooved Reducing Tee
Reducing Tee REDUCING TEE
Size Reducing Tee No. 25

inches Approx. Price Each
Wgt. Each
Run x Branch lb Painted Galv.
1 x 1 x ¾ (sw) 1.0 $416.00 $488.50
1¼ x 1¼ x 1 (sw) 1.3 431.00 488.50
No. 25 1½ x 1½ x ¾ (sw) 1.5 436.50 598.50
1 (sw) 1.5 598.50 616.00
1¼ (sw) 1.7 453.50 502.00
2 x 2 x ¾ 2.5 564.50 663.50
1 2.7 515.50 602.50
1¼ (sw) 1.8 642.50 674.50
1½ 3.0 515.50 612.50
2½ x 2½ x ¾ (sw) 3.9 693.50 752.00
1 3.8 515.50 602.50
1¼ 4.2 775.00 912.00
1½ 3.9 515.50 612.50
2 4.5 515.50 612.50
3 x 3 x ¾ (sw) 5.7 798.50 832.50
1 6.1 455.00 579.50
1¼ 8.0 637.50 841.50
1½ 6.5 455.00 586.00
2 6.2 455.00 586.00
2½ 6.6 455.00 586.00
4 x 4 x ¾ (sw) 8.0 1021.00 1089.00
1 7.8 612.50 763.00
1¼ (sw) 9.6 1199.00 1397.00
1½ 10.2 612.50 763.00
2 11.2 612.50 800.50
2½ 11.4 612.50 800.50
3 11.6 612.50 800.50
5 x 5 x 1 (sw) 14.0 1344.00 1652.00
1½ (sw) 14.3 1705.50 1846.50
2 (sw) 14.5 1477.50 1825.00
2½ 15.2 1204.50 1515.50
3 16.6 1204.50 1515.50
4 16.7 1303.50 1646.50
6 x 6 x 1 (sw) 23.0 1620.00 1985.00
1½ (sw) 24.0 1673.50 2290.50
2 21.6 1434.50 1883.00
2½ 21.4 1434.50 1883.00
3 26.5 1434.50 1883.00
4 25.0 1434.50 1883.00
5 23.2 1434.50 1894.00
8 x 8 x 1½ (sw) 33.0 2066.50 2513.00
2 (sw) 33.5 2066.50 2607.50
2½ (sw) 39.0 2066.50 2607.50
3 33.6 2225.50 2657.50

Reducing Tee REDUCING TEE
Size Reducing Tee No. 25

Wgt. Each
8 x 8 x 4 41.8 $2984.00 $3855.00
5 (sw) 34.0 2984.00 3881.50
No. 25 6 42.3 2984.00 3897.50
10 x 10 x 1½ (sw) 62.0 2990.00 3917.00
2 (sw) 62.0 3038.00 3917.00
2½ (sw) 62.4 3086.00 3917.00
3 (sw) 60.0 3133.50 3949.00
4 61.0 3182.00 3977.00
5 (sw) 52.0 3229.50 4037.00
6 59.0 3277.50 4096.50
8 64.7 3324.00 4156.00
12 x 12 x 1 (sw) 77.0 3330.00 4169.50
2 (sw) 80.0 3362.50 4182.00
2½ (sw) 78.0 3397.00 4194.00
3 (sw) 82.0 3431.00 4208.00
4 (sw) 80.0 3466.50 4220.50
5 (sw) 75.0 3500.00 4234.50
6 (sw) 75.0 3534.50 4247.00
8 80.0 3944.00 4738.00
10 (sw) 84.0 4164.50 5032.00

No. L25 Carbon Steel Reducing Tee
Carbon Steel Reducing NO. L25 CARBON STEEL REDUCING TEE
Size Reducing Tee No. L25

Tee inches Price Each
Approx. Wgt. Each
SA352 Grade LCC
2 x 2 x 1½ † 3.1 $499.50 $575.00
3 x 3 x 1½ † 7.9 538.50 644.50
2† 8.1 566.00 675.50
4 x 4 x 1½ † 12.9 1005.00 1195.00
2† 13.0 1019.00 1212.50
2½ † 16.9 1201.50 1436.00
3† 14.3 1112.50 1323.50
6 x 6 x 2† 33.6 2848.50 3276.00
3† 35.5 2877.00 3307.50
No. L25 4 34.5 2995.50 3445.00
8 x 8 x 2† 60.9 3993.50 4593.00
2½ † 66.0 3993.50 4593.00
3† 66.0 4119.50 4736.50
4 60.5 4387.00 5045.50
6 62.3 4387.00 5045.50
10 x 10 x 6 96.7 6367.00 7355.50
8 100.3 6367.00 7355.50
12 x 12 x 2† – + +
8* 172.0 + +
10 * 182.0 + +

No. W25 AGS Grooved Reducing Tee
AGS Reducing Tee AGS REDUCING TEE *
Size AGS Reducing Tee No. W25 (sw)

Wgt. Each
VICTAULIC
No.W25
14 x 14 x 6 142.0 $3746.50 $4495.50

8 143.0 3837.50 4605.00
No. W25
10 144.0 4059.00 4870.50
12 147.0 4344.00 5211.50
16 x 16 x 6 176.0 3216.00 4156.00
8 185.0 3388.50 4294.50
10 195.0 3661.00 4637.50
12 204.0 3733.50 4743.50
14 210.0 4371.50 5753.50
18 x 18 x 8 231.0 4317.00 6042.50
10 244.0 4479.50 6105.50
12 254.0 4479.50 6164.50
14 262.0 5183.50 7053.00
16 269.0 5658.00 7561.50
20 x 20 x 8 282.0 5650.50 7503.00
10 295.0 5726.00 7590.00
12 308.0 6406.50 8180.00
14 316.0 6899.50 8783.50
16 329.0 7401.50 9382.00
18 342.0 8139.50 10290.00
24 x 24 x 8 381.0 8574.00 12422.50
10 394.0 8996.50 11965.00
12 409.0 9249.50 13013.00
14 419.0 10319.00 14143.50
16 433.0 10549.50 14462.50
18 453.0 10744.00 15619.50
20 473.0 11665.00 17102.00
26 x 26 x 14 536.0 + +
16 545.0 + +
18 562.0 + +
20 582.0 + +
22 600.0 + +
24 617.0 + +
28 x 28 x 14 605.0 + +
16 624.0 + +
18 644.0 + +
20 665.0 + +
22 685.0 + +
24 705.0 + +
26 717.0 + +
30 x 30 x 14 689.0 + +
16 707.0 + +
18 728.0 + +
20 750.0 + +
22 774.0 + +
24 796.0 + +
26 820.0 + +
28 838.0 + +
* Victaulic fittings listed are made of segmentally welded steel.


Wgt. Each
VICTAULIC
No.W25
32 x 32 x 16 1183.0 + +
18 1209.0 + +
No. W25
20 1239.0 + +
22 1272.0 + +
24 1303.0 + +
26 1334.0 + +
28 1358.0 + +
30 1385.0 + +
36 x 36 x 18 1360.0 + +
20 1369.0 + +
22 1371.0 + +
24 1418.0 + +
26 1442.0 + +
28 1477.0 + +
30 1510.0 + +
32 1543.0 + +
38 x 38 x 18 1262.0 + +
20 1278.0 + +
22 1292.0 + +
24 1314.0 + +
26 1340.0 + +
28 1367.0 + +
30 1393.0 + +
32 1420.0 + +
36 1473.0 + +
40 x 40 x 20 1475.0 + +
22 1505.0 + +
24 1543.0 + +
26 1594.0 + +
28 1631.0 + +
30 1682.0 + +
32 1768.0 + +
36 1852.0 + +
38 1929.0 + +
42 x 42 x 20 1875.0 + +
22 1940.0 + +
24 2017.0 + +
26 2105.0 + +
28 2105.0 + +
30 2202.0 + +
32 2202.0 + +
36 2304.0 + +
38 1375.0 + +
40 1761.0 + +


Wgt. Each
VICTAULIC
No.W25
46 x 46 x 22 1843.0 + +
24 1865.0 + +
No. W25
26 1880.0 + +
28 1900.0 + +
30 1927.0 + +
32 1953.0 + +
36 2006.0 + +
38 2033.0 + +
40 2059.0 + +
42 2086.0 + +
48 x 48 x 24 2503.0 + +
26 2525.0 + +
28 2540.0 + +
30 2579.0 + +
32 2579.0 + +
36 2652.0 + +
38 2729.0 + +
40 2804.0 + +
42 2804.0 + +
46 2881.0 + +
54 x 54 x 26 2805.0 + +
28 2805.0 + +
30 2821.0 + +
32 2835.0 + +
36 2853.0 + +
38 2879.0 + +
40 2906.0 + +
42 2932.0 + +
46 2985.0 + +
48 3012.0 + +
56 x 56 x 28 3059.0 + +
30 3075.0 + +
32 3087.0 + +
36 3111.0 + +
38 3137.0 + +
40 3164.0 + +
42 3190.0 + +
46 3243.0 + +
48 3269.0 + +
54 3349.0 + +


Wgt. Each
VICTAULIC
No.W25
60 x 60 x 30 3269.0 + +
32 3380.0 + +
No. W25
36 3345.0 + +
38 3386.0 + +
40 3420.0 + +
42 3459.0 + +
46 3512.0 + +
48 3538.0 + +
54 3618.0 + +
56 3644.0 + +
No. LW25 AGS Carbon Steel Reducing Tee
AGS Carbon NO. LW25 AGS CARBON STEEL REDUCING TEE
Size Reducing Tee No. LW25

Steel Reducing inches Price Each
Approx. Wgt. Each
Tee Run x Branch lb Painted Galv.
14 x 14 x 4 210.0 + +
SA352 Grade LCC 8 205.0 + +
Refer to publication 51.01 10 200.0 + +
16 x 16 x 4 234.0 + +
6 238.0 + +
8 248.0 + +
10 262.0 + +
No. LW25 Fittings are cast unless otherwise noted.

No. 29T Threaded Reducing Tee
Reducing Tee with REDUCING TEE WITH THREADED BRANCH
Size Reducing Tee No. 29T with Threaded Branch

Threaded Branch inches Price Each
Approx. Wgt. Each
Refer to publication 07.01 Run x Branch lb Painted Galv.
1 x 1 x ¾ 1.0 (sw) + +
1¼ x 1¼ x 1 1.3 (sw) + +
1½ x 1½ x ¾ 1.5 (sw) + +
1 1.5 (sw) + +
No. 29T 1¼ 1.7 (sw) + +
2 x 2 x ¾ 2.5 $596.00 $700.50
1 2.7 544.50 637.50
1¼ 2.9 (sw) 912.50 975.50
1½ 3.0 544.50 646.00
2½ x 2½ x ¾ 3.5 (sw) 1065.50 1099.00
1 3.8 544.50 637.50
1¼ 3.8 1183.50 1216.00
1½ 3.9 544.50 646.00
2 4.5 544.50 651.50
3 x 3 x ¾ 5.9 (sw) 994.50 1055.50
1 6.1 544.50 680.00
1¼ 6.3 1335.50 1419.50
1½ 6.5 544.50 682.50
2 6.2 544.50 682.50
2½ 6.4 1207.50 1412.00
4 x 4 x ¾ 7.2 (sw) 1440.50 1775.00
1 7.8 680.00 835.00
1¼ 8.5 (sw) 1391.50 1499.00
1½ 9.2 680.00 849.50
2 11.2 680.00 849.50
2½ 11.4 680.00 874.00
3 11.6 680.00 877.50
5 x 5 x 2 14.5 (sw) 1448.00 1578.00
2½ 15.2 1301.50 1648.00
3 16.6 (sw) 1204.50 1515.50
4 16.7 (sw) 1301.50 1775.00
6 x 6 x 1 23.0 (sw) 1973.00 2293.00
1½ 25.0 (sw) 1746.50 2197.00
2 21.6 1689.00 2102.50
2½ 21.4 1689.00 2102.50
3 26.5 1689.00 2102.50
4 25.0 (sw) 2133.00 2293.00
5 23.2 (sw) 1689.00 2102.50
8 x 8 x 2 33.5 (sw) 2066.50 2848.50
3 33.6 (sw) 2848.50 3692.50
4 41.8 (sw) 2984.00 3855.00
5 34.0 (sw) 2984.00 3878.50
6 42.3 (sw) 3301.50 4532.50

Reducing Tee with REDUCING TEE WITH THREADED BRANCH
Size Reducing Tee No. 29T with Threaded Branch (sw)

Threaded Branch inches Price Each
Approx. Wgt. Each
Refer to publication 07.01 Run x Branch lb Painted Galv.
10 x 10 x 2 62.0 $3459.50 $5052.50
3 60.0 3459.50 4291.00
4 61.0 3619.00 4624.50
5 52.0 3182.00 4721.00
No. 29T 6 59.0 3698.50 4782.50
8 64.7 4986.00 5574.00
12 x 12 x 3 80.0 4657.50 6013.00
4 82.0 4991.00 6409.50
5 75.0 5275.50 6851.50
6 75.0 5339.50 6915.00
8 80.0 5489.00 7076.00
10 84.0 5745.00 7087.50

No. 50 Concentric Reducer, No. 51 Eccentric Reducer
Reducers REDUCERS – CONCENTRIC OR ECCENTRIC
Size Concentric Reducer No. 50 Eccentric Reducer No. 51

Wgt. Ea. Wgt. Ea.
1¼ x ¾ 1.9 $706.00 $775.00 3.2 + +
No. 50 1 1.9 740.00 813.00 3.2 + +
1½ x ¾ 1.4 831.50 897.50 4.5 + +
1 0.8 186.50 219.00 4.5 (sw) $720.50 $912.50
1¼ 1.0 186.50 219.00 4.5 762.50 953.00
No. 51 2 x ¾ 0.9 186.50 219.00 2.0 (sw) 859.00 +
1 0.7 186.50 219.00 2.3 (sw) 859.00 963.50
1¼ 1.2 203.00 238.50 4.6 (sw) 938.50 +
1½ 1.0 186.50 219.00 1.1 194.50 230.00
2½ x ¾ 1.3 1445.00 1559.00 3.3 2169.50 2444.00
1 1.1 252.50 289.50 3.5 2020.50 2236.00
1¼ 3.3 186.50 219.00 1.4 208.00 239.00
1½ 3.6 186.50 219.00 3.7 (sw) 937.50 1070.00
2 3.9 186.50 219.00 4.3 385.00 521.50
3 x ¾ 1.5 1453.00 1625.00 4.5 + +
1 1.3 203.00 247.00 4.8 (sw) 2167.00 2385.50
1¼ 1.4 323.50 371.50 4.8 1963.00 +
1½ 5.1 224.00 271.50 5.1 (sw) 1081.00 1262.50
2 1.6 165.50 201.50 6.0 439.50 598.50
2½ 1.8 224.00 269.50 7.0 439.50 612.50
3½ x 3 2.0 238.00 286.50 7.0 (sw) 2380.50 +
4 x 1 3.0 246.00 300.50 6.5 (sw) 4384.00 +
1¼ 4.6 1857.00 2081.50 – – –
1½ 2.6 (sw) 337.50 445.50 8.1 (sw) 2654.00 2866.00
2 2.4 219.00 268.00 3.3 534.50 744.50
2½ 2.7 269.50 327.00 3.4 534.50 744.50
3 3.2 269.50 327.00 3.5 534.50 744.50
3½ 2.9 269.50 327.00 8.0 (sw) 3711.50 +
5 x 2 9.0 (sw) 2610.50 2884.00 5.2 (sw) 2927.00 +
2½ 4.3 544.50 662.50 10.8 (sw) 2493.00 +
3 5.0 311.50 385.00 11.1 (sw) 2411.00 2686.50
4 4.3 370.50 462.00 12.0 724.00 1021.00
6 x 1 5.0 488.50 609.00 14.5 (sw) 4539.50 4931.00
1½ 5.5 + + + 4401.50 +
2 6.6 488.50 609.00 14.5 (sw) 4144.00 4511.00
2½ 6.4 544.50 667.50 14.2 (sw) 4931.00 5367.50
3 6.4 488.50 609.00 15.0 960.50 1346.50
4 6.5 429.50 553.00 17.0 842.50 1234.50
5 6.4 630.50 780.00 17.0 1010.00 1429.00
8 x 3 9.3 868.50 1081.00 22.0 (sw) 4810.00 5238.00
4 10.4 868.50 1087.00 23.0 (sw) 4207.50 4799.00
5 11.6 868.50 1092.50 23.0 (sw) 4207.50 4799.00
6 11.9 1100.50 1378.50 24.0 1696.50 2306.50

Reducers REDUCERS – CONCENTRIC OR ECCENTRIC
Size Concentric Reducer No. 50 Eccentric Reducer No. 51

Wgt. Ea. Wgt. Ea.
10 x 4 19.7 $1972.00 $2429.50 32.0 (sw) $7425.50 $8904.00
No. 50 5 33.0 4337.00 4948.00 34.6 6993.50 8229.50
6 20.0 2159.00 2689.50 36.9 (sw) 5275.50 6253.00
8 22.0 2159.00 2734.50 21.6 4468.00 5553.50
12 x 4 44.0 (sw) 9433.50 11226.00 48.0 (sw) 7798.00 9173.00
No. 51 6 24.6 2573.00 3178.00 50.0 (sw) 7045.50 8485.50
8 52.0 3856.50 4553.00 53.5 (sw) 6868.00 8216.00
10 39.0 3856.50 4773.50 57.0 (sw) 6149.00 7291.50
No. L50 Carbon Steel Concentric Reducer, No. L51 Carbon Steel Eccentric Reducer
Carbon Steel CARBON STEEL REDUCERS – CONCENTRIC OR ECCENTRIC
Size Concentric Reducer No. L50 Eccentric Reducer No. L51

Reducers Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
Refer to publication 50.01 2 x 1½ † 1.3 $181.50 $209.50 1.0 $187.50 $216.00
3 x 1½ † 2.2 181.50 209.50 2.2 425.00 488.50
2† 2.2 181.50 209.50 2.9 425.00 488.50
4 x 1½ † 3.9 342.50 394.50 4.2 562.00 646.50
2† 3.5 342.50 394.50 3.4 562.00 646.50
2½ † 4.6 342.50 394.50 – – –
3† 4.4 342.50 394.50 4.1 562.00 646.50
6 x 2† 7.8 637.50 733.50 8.8 959.50 1103.50
No. L50 3† 9.9 749.00 862.00 9.1 959.50 1103.50
4 7.3 812.00 934.00 10.3 959.50 1103.50
8 x 4 15.7 1086.50 1248.50 11.7 1197.50 1377.50
6 17.9 1206.00 1387.50 12.7 1197.50 1377.50
10 x 4 24.0 1997.00 2297.00 – – –
6 26.9 2122.00 2440.00 19.1 2128.50 2448.00
No. L51 8 29.2 2122.00 2440.00 19.8 2128.50 2448.00
12 x 8 39.2 3681.50 4234.50 40.2 3741.50 4303.00
10 43.5 3681.50 4234.50 31.7 3741.50 4303.00

No. W50 AGS Concentric Reducer, No. W51 AGS Eccentric Reducer
AGS Reducers AGS REDUCERS – CONCENTRIC OR ECCENTRIC
Size AGS Concentric Reducer No. W50 AGS Eccentric Reducer No. W51
Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
14 x 6 68.0 $6845.00 $7852.00 68.0 $8846.00 $10527.50
8 70.0 3881.00 4544.00 70.0 6699.50 7643.50
No. W50
10 * 72.0 3392.00 3784.50 72.0 5790.50 6701.00
12 * 74.0 3712.50 4186.50 74.0 5623.00 6509.00
16 x 8 88.0 5557.50 6413.50 88.0 9770.50 +
VICTAULIC
No.W51
10 91.0 5341.00 6060.50 91.0 9027.00 +

No. W51 12 * 93.0 5412.50 6095.00 93.0 8390.00 9176.50
14 * 95.0 5412.50 6170.00 95.0 8212.50 10508.50
18 x 10 112.0 7410.50 9590.50 112.0 12278.00 +
12 115.0 7610.50 10513.00 115.0 11530.50 13258.00
14 * 118.0 6162.00 7763.00 118.0 9899.00 11972.00
16 * 121.0 6162.00 7763.00 121.0 9899.00 13218.50
20 x 12 160.0 8292.50 10049.00 160.0 10196.00 +
14 164.0 8325.00 10068.50 164.0 11620.00 +
16 * 168.0 6700.50 8256.50 168.0 11220.50 13570.50
18 * 172.0 6450.50 11054.00 172.0 11220.50 14160.00
24 x 10 145.0 17812.50 + – + +
12 150.0 19446.00 25930.50 – + +
14 161.0 14623.50 + 148.0 + +
16 198.0 15911.50 23053.50 198.0 18824.50 +
18 * 200.0 15224.00 18377.00 200.0 17788.50 20971.50
20 * 204.0 12251.50 15419.50 204.0 18001.00 22230.00
26 x 14 167.0 + + 159.0 + +
16 173.0 + + 167.0 + +
18 179.0 + + 175.0 + +
20 185.0 + + 183.0 + +
22 192.0 + + 191.0 + +
24 199.0 + + 199.0 + +
28 x 14 180.0 + + 167.0 + +
16 185.0 + + 175.0 + +
18 190.0 + + 183.0 + +
20 196.0 + + 191.0 + +
22 202.0 + + 199.0 + +
24 208.0 + + 207.0 + +
26 216.0 + + 215.0 + +
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll
grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E
dimensions may be substituted to meet delivery requirements.

Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
30 x 14 192.0 + + 175.0 + +
16 197.0 + + 183.0 + +
No. W50
18 202.0 + + 191.0 + +
20 207.0 + + 199.0 + +
22 213.0 + + 207.0 + +
VICTAULIC
No.W51
24 218.0 + + 215.0 + +
No. W51 26 225.0 + + 223.0 + +
28 232.0 + + 232.0 + +
32 x 16 210.0 + + 191.0 + +
18 214.0 + + 199.0 + +
20 219.0 + + 207.0 + +
22 224.0 + + 215.0 + +
24 229.0 + + 223.0 + +
26 235.0 + + 232.0 + +
28 241.0 + + 240.0 + +
30 248.0 + + 248.0 + +
36 x 18 320.0 + + 282.0 + +
20 325.0 + + 292.0 + +
22 330.0 + + 303.0 + +
24 336.0 + + 314.0 + +
26 342.0 + + 324.0 + +
28 348.0 + + 335.0 + +
30 355.0 + + 346.0 + +
32 363.0 + + 356.0 + +
40 x 20 365.0 + + 316.0 + +
22 369.0 + + 326.0 + +
24 373.0 + + 337.0 + +
26 377.0 + + 346.0 + +
28 382.0 + + 357.0 + +
30 387.0 + + 367.0 + +
32 393.0 + + 378.0 + +
36 407.0 + + 399.0 + +
42 x 20 386.0 + + 327.0 + +
22 390.0 + + 337.0 + +
24 393.0 + + 348.0 + +
26 397.0 + + 359.0 + +
28 401.0 + + 369.0 + +
30 405.0 + + 378.0 + +
32 409.0 + + 389.0 + +
36 421.0 + + 410.0 + +
40 438.0 + + 432.0 + +

Wgt. Ea. Wgt. Ea.
VICTAULIC
No.W50
46 x 22 479.0 + + 419.0 + +
24 485.0 + + 431.0 + +
No. W50
26 490.0 + + 444.0 + +
28 496.0 + + 456.0 + +
30 502.0 + + 469.0 + +
VICTAULIC
No.W51
32 508.0 + + 481.0 + +
No. W51 36 523.0 + + 504.0 + +
38 531.0 + + 516.0 + +
40 540.0 + + 529.0 + +
42 550.0 + + 542.0 + +
48 x 24 507.0 + + 444.0 + +
26 513.0 + + 456.0 + +
28 518.0 + + 467.0 + +
30 523.0 + + 481.0 + +
32 529.0 + + 494.0 + +
36 541.0 + + 516.0 + +
38 548.0 + + 529.0 + +
40 557.0 + + 542.0 + +
42 565.0 + + 554.0 + +
46 586.0 + + 579.0 + +
54 x 28 1015.0 + + 974.0 + +
30 1035.0 + + 998.0 + +
32 1054.0 + + 1022.0 + +
36 1095.0 + + 1070.0 + +
38 1116.0 + + 1095.0 + +
40 1138.0 + + 1119.0 + +
42 1158.0 + + 1143.0 + +
46 1202.0 + + 1191.0 + +
48 1224.0 + + 1215.0 + +
56 x 28 1081.0 + + 1035.0 + +
30 1101.0 + + 1060.0 + +
32 1122.0 + + 1085.0 + +
36 1164.0 + + 1135.0 + +
38 1185.0 + + 1160.0 + +
40 1207.0 + + 1186.0 + +
42 1228.0 + + 1211.0 + +
46 1273.0 + + 1261.0 + +
48 1296.0 + + 1286.0 + +
54 1368.0 + + 1361.0 + +
60 x 30 1241.0 + + 1190.0 + +
32 1263.0 + + 1217.0 + +
36 1307.0 + + 1270.0 + +
38 1330.0 + + 1297.0 + +
40 1353.0 + + 1324.0 + +
42 1376.0 + + 1351.0 + +
46 1423.0 + + 1404.0 + +
48 1447.0 + + 1431.0 + +
54 1521.0 + + 1512.0 + +
56 1547.0 + + 1538.0 + +

No. LW50 AGS Carbon Steel Concentric Reducer, No. LW51 AGS Carbon Steel Eccentric Reducer
AGS Carbon AGS CARBON STEEL REDUCERS – CONCENTRIC OR ECCENTRIC
Size Concentric Reducer No. LW50 Eccentric Reducer No. LW51

Steel Reducers Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
Refer to publication 51.01 14 x 8 90.0 + + 100.0 + +
10 96.0 + + – – –
12 105.0 + + 124.0 + +
16 x 8 104.0 + + 132.0 + +
10 108.0 + + 138.0 + +
12 112.0 + + – – –
No. LW50 Carbon steel wall thickness is standard weight unless otherwise noted.
No. LW51

No.(s) 53, 54 and 55 Swaged Nipples
Swaged Nipples SWAGED NIPPLES
Steel Steel
Refer to publication 07.01 Swaged Swaged
Nipples Nipples
No. 53, 54, No. 53, 54,
Approx. 55 Approx. 55
Nominal Size Wgt. Ea. Plated Nominal Size Wgt. Ea. Plated
No. 53 Grooved x Grooved
inches lb Price Each inches lb Price Each
2 x 1 2.0 $682.00 4 x 2½ 7.5 $2035.50
1¼ 2.0 682.00 3 7.5 2035.50
1½ 2.0 682.00 3½ 7.5 2619.00
No. 54 Grooved x Threaded
2½ x 1 3.0 1463.50 5 x 2 11.5 2880.00
1¼ 3.0 1463.50 3 11.5 2880.00
1½ 3.0 1463.50 4 11.5 2880.00
2 3.0 1301.00 6 x 1 17.0 5738.00
No. 55 Threaded x Grooved
3 x 1 4.5 1631.00 1¼ 17.0 5738.00
1¼ 4.5 1631.00 1½ 17.2 5738.00
1½ 4.5 1631.00 2 17.4 4694.50
2 4.5 1371.00 2½ 17.4 4694.50
2½ 4.6 1371.00 3 17.4 4694.50
3½ x 3 6.8 3129.00 4 17.5 2813.00
4 x 1 7.5 2316.50 5 17.5 2813.00
1¼ 7.5 2316.50 8 x 6 20.0 5354.50
1½ 7.5 1777.00
2 7.5 1777.00

No. 52 – Reducer Threaded Small End
Reducer – Male REDUCER – MALE THREADED SMALL END
Nominal Approx.
Threaded Small End Size Wgt. Ea. Price Each
Refer to publication 07.01 inches
Inlet x Outlet lb Painted Galv.
1½ x 1 0.8 $194.50 $238.00
1¼ 0.9 203.00 238.50
2 x ¾ 0.9 194.50 238.00
No. 52
1 0.7 194.50 238.00
1¼ 1.2 194.50 238.00
1½ 1.0 194.50 238.00
2½ x 1 1.1 261.50 299.50
1¼ 1.2 274.00 335.50
1½ 1.3 286.50 335.50
2 1.4 194.50 238.00
3 x ¾ 1.5 (sw) 1368.50 1456.00
1 1.3 210.50 253.50
1½ 1.5 238.00 284.00
2 1.5 238.00 284.00
2½ 2.4 286.50 335.50
4 x 1 2.3 270.50 327.00
1½ 2.7 628.00 820.50
2 2.6 288.00 343.50
2½ 2.6 289.00 353.50
3 2.5 353.00 415.50
5 x 4 4.5 1981.00 2154.00
6 x 1 5.5 544.50 667.50
2 5.7 544.50 667.50
2½ 5.8 544.50 667.50
3 5.8 544.50 667.50
4 6.5 (sw) 3250.00 3599.50
5 2.0 (sw) 5072.50 +
No. L52 – Carbon Steel Reducer – Female Threaded
Carbon Steel Reducer –CARBON STEEL REDUCER – FEMALE THREADED

Size Reducer – Female Threaded No. L52
Female Threaded inches Price Each
Approx. Wgt. Each
SA352 Grade LCC
1½ x ¾† 1.0 $201.00 $231.00
1† 1.0 201.00 231.00
2 x ¾† 1.4 214.50 246.50
1† 1.3 214.50 246.50
1½ † 1.3 214.50 246.50
No. L52 Fittings are cast unless otherwise noted.

No. 30 Lateral
Lateral LATERAL
Nom. Size 45° Lateral No. 30

Approx. Price Each
Wgt. Ea.
¾ 1.0 (sw) + +
1 1.7 (sw) + +
1¼ 2.5 $938.00 +
1½ 3.5 (sw) + +
No. 30 2 5.1 938.00 $1147.00
2½ 9.0 (sw) 938.00 1147.00
3 11.7 1035.00 1303.50
3½ 17.8 (sw) + +
4 17.9 1590.50 1981.00
5 21.8 (sw) 2321.50 2913.50
6 43.6 3735.00 4484.50
8 72.0 (sw) 5373.50 6511.00
10 105.0 (sw) 7299.00 8466.50
12 165.0 (sw) 8822.50 11178.00
No. W30 AGS Lateral
AGS Lateral AGS LATERAL
Nom. Size AGS 45° Lateral No. W30 (sw)

Approx. Price Each
Wgt. Ea.
14 276.0 $6435.50 $8257.00
VICTAULIC
No.W30
16 344.2 8037.50 10324.00

18 429.0 8491.00 11679.50
20 500.0 13627.50 17267.50
No. W30 24 715.0 20007.50 24672.00

No. 60 Cap
Cap CAP
Nom. Size Cap No. 60

Approx. Price Each
Wgt. Ea.
¾ 0.2 $320.00 $349.00
1 0.3 137.00 161.00
1¼ 0.3 137.00 161.00
No. 60
1½ 0.5 137.00 161.00
2 0.6 137.00 161.00
2½ 1.0 137.00 161.00
3 1.4 137.00 161.00
3½ 2.5 146.00 190.50
4 2.5 146.00 190.50
5 4.6 335.50 449.00
6 6.0 335.00 449.00
8 13.1 637.00 841.50
10 21.0 1111.00 1390.00
12 35.6 1942.50 2429.50
NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and
non-returnable.
No. L60 Carbon Steel Cap
Carbon Steel Cap CARBON STEEL CAP
Nominal Size Cap No. L60

SA352 Grade LCC Approx. Wgt. Ea. Price Each
1½ 0.5 $153.00 $175.50
2 0.8 153.00 175.50
3 1.8 153.00 175.50
4 3.7 246.50 295.50
6 8.3 579.50 693.50
8 15.8 1143.50 1366.00
No. L60 10 28.0 + +
12 41.6 2979.00 3558.50

No. W60 AGS Cap
AGS Cap AGS CAP
Nom. Size AGS Cap No. W60

Approx. Price Each
Wgt. Ea.
VICTAULIC
No.W60
14 33.2 $2127.50 $2435.50

16 41.2 2407.50 2874.50
18 54.6 2786.50 3292.00
No. W60 20 67.5 3163.50 3779.00
24 96.0 4307.00 4981.00
26 144.0 + +
28 166.0 + +
30 187.0 + +
32 209.0 + +
36 253.0 + +
40 391.0 + +
42 420.0 + +
46 532.0 + +
48 613.0 + +
54 785.0 + +
56 875.0 + +
60 977.0 + +
NOTE: Caps are available with taps. Contact Victaulic for pricing and availability. All tapped caps are non-cancellable and non-
returnable.
No. LW60 AGS Carbon Steel Cap
AGS Carbon AGS CARBON STEEL CAP
Nominal Size AGS Cap No. LW60

Steel Cap Approx. Wgt. Ea. Price Each
SA352 Grade LCC
14 33.2 + +
16 41.2 + +
No. LW60

No. 30R Reducing Lateral
Reducing Laterals REDUCING LATERALS
Nominal Size Reducing Laterals No. 30R †

Approx. Price Each
Wgt. Each
3 x 3 x 2 9.8 $812.00 $1012.50
2½ 9.8 812.00 +
4 x 4 x 2 10.0 1590.50 1894.00
2½ 10.0 1590.50 1961.00
No. 30R 3 18.3 1590.50 1978.50
5 x 5 x 2 24.0 2321.50 +
3 27.0 2321.50 2878.00
4 26.5 2321.50 2924.00
6 x 6 x 3 37.0 2994.50 3746.50
4 36.5 2994.50 3772.50
5 44.7 2994.50 3813.00
8 x 8 x 4 62.0 4319.00 5482.50
5 75.5 4319.00 5531.00
6 82.0 4319.00 5598.00
10 x 10 x 4 104.8 4726.50 6208.50
5 99.0 + 6623.50
6 105.8 5185.00 6623.50
8 118.0 5281.50 7046.00
12 x 12 x 5 122.0 6127.00 +
6 137.0 6127.00 8733.00
8 147.0 6205.50 8383.00
10 167.0 6288.00 8656.00
† All No. 30R fittings are segmentally welded steel.

No. W30R AGS Reducing Lateral
AGS Reducing AGS REDUCING LATERALS
Nominal Size AGS Reducing Lateral No. W30R †

Laterals Approx. Price Each
Refer to publication 20.05 Wgt. Each
14 x 14 x 4 162.4 $2687.00 $4042.00
6 167.6 2884.00 4313.00
8 173.5 3102.00 4879.00
10 181.0 3932.00 5151.00
12 189.2 3990.00 5718.00
No. W30R 16 x 16 x 6 206.7 4180.00 5948.00
8 213.1 4420.00 7113.50
10 221.1 5158.50 7039.50
12 229.9 5376.50 7549.50
14 230.9 5376.50 7549.50
18 x 18 x 6 253.1 5376.50 7549.50
8 259.9 5376.50 7549.50
10 285.0 7187.00 10133.50
12 277.6 5975.00 8445.50
14 278.7 7152.00 9301.00
16 284.3 8045.00 10391.50
20 x 20 x 12 330.0 7464.00 10979.00
14 331.2 7925.50 11315.00
16 337.2 9349.00 12993.50
24 x 24 x 16 448.5 17745.00 22849.50
18 515.0 + +
20 461.8 19303.00 23603.50
† All No. W30R fittings are segmentally welded steel.

No. 32 Tee Wye
Tee Wyes TEE WYES
Nominal Size Tee Wye No. 32 (sw)

Approx. Price Each
Wgt. Each
2 x 2 x 2 6.4 $1628.50 $1938.50
2½ x 2½ x 2½ 11.5 1628.50 1938.50
3 x 3 x 3 14.3 1866.50 2251.50
3½ x 3½ x 3½ 22.9 + +
4 x 4 x 3 23.0 2246.50 2720.00
No. 32
4 26.0 2589.50 3147.50
5 x 5 x 3 29.0 3250.50 3810.50
4 36.7 3746.50 4183.00
5 48.0 5504.50 6722.50
6 x 6 x 3 37.3 2663.50 3437.50
4 46.3 3246.50 4055.00
5 55.0 + +
6 60.5 4934.50 6101.50
8 x 8 x 3 76.0 3170.50 4605.00
4 76.4 3777.50 5204.50
5 85.6 4998.00 6573.50
6 112.0 5451.00 7126.50
8 127.1 7508.00 9519.00
10 x 10 x 3 96.0 4205.50 5828.50
4 97.4 4611.00 6331.00
5 115.1 + 7721.50
6 133.1 6114.00 8111.50
8 156.0 7931.50 10203.50
10 190.0 10359.00 13282.00
12 x 12 x 12 240.0 14280.50 18131.50
No. 61 Bull Plug
Bull Plugs ELECTROPLATED STEEL BULL PLUGS
Electroplated
Refer to publication 07.01 Nom. Size Steel Bull Plug No. 61
Approx.
Wgt. Ea.
inches lb Price Each
No. 61 2 2.0 $477.50
2½ 3.0 477.50
3 4.5 699.00
4 7.5 897.50
5 12.0 1953.00
6 17.0 2104.50
Other sizes available upon request. Contact Victaulic for details.

No. 48 Hose Nipple
Hose Nipples STEEL HOSE NIPPLES
Length
Refer to publication 07.01 Nom. Size inches Steel Hose Nipple No. 48
Approx. Price Each
Wgt. Ea.
inches End to End lb Painted Galv.
No. 48 ¾ 3.25 0.3 $314.50 $373.50
1 3.25 0.4 314.50 +
1¼ 3.63 0.6 314.50 +
1½ 4.00 0.8 314.50 373.50
2 4.63 1.1 314.50 373.50
2½ 5.50 2.0 314.50 373.50
3 6.00 3.2 451.50 543.00 NR
4 7.25 4.9 779.50 938.00
5 9.75 8.0 1176.50 +
6 10.12 14.3 1395.50 +
8 12.50 24.7 2896.00 +
10 14.00 40.1 2844.50 +
12 16.00 62.0 + +
NR
Non-returnable
No(s). 45 and 46 Flanged Adapter Nipples
Flanged Adapter FLANGED ADAPTER NIPPLES – 150 LB OR 300 LB *
Size x Length No. 45 – 150 lb No. 46 – 300 lb

Nipples inches Black Galv. Black Galv.
Refer to publication 07.01 1 x 3 + + + +
1¼ x 4 + + + +
1½ x 4 $618.50 $742.00 + +
2 x 4 592.00 711.00 $829.00 $995.50
2½ x 4 783.50 940.00 + +
Nos. 45 & 46 3 x 4 758.00 909.50 1061.00 1273.00
3½ x 4 + + + +
4 x 6 975.50 1171.50 1365.00 1639.50
5 x 6 1205.00 1446.50 1687.50 +
6 x 6 1495.00 1794.00 2093.00 2511.50
8 x 6 1977.50 2372.50 2769.00 3321.50
10 x 8 2601.50 2924.00 3641.50 +
12 x 8 3332.00 3998.00 4664.00 5597.50
* Raised face flanges are standard; flat flanges are quoted on application.

No. L45R and No. L46R Carbon Steel Flanged Adapter Nipples
Carbon Steel Flanged FLANGED ADAPTER NIPPLES – 150 LB OR 300 LB *
150# Flanged Adapter Nipple No. L45R 300# Flanged Adapter Nipple No. L46R
Adapter Nipples Size x Length Raised Face Raised Face
Approx. Approx.
SA352 Grade LCC Wgt. Ea. Price Each Wgt. Ea. Price Each
Refer to publication 51.01 inches lb Painted Galv. lb Painted Galv.
1½ x 4 3.7 $612.50 $704.00 6.5 $687.00 $790.00
2 x 4 6.8 637.50 732.50 8.0 786.50 904.50
2½ x 4 10.1 780.00 898.00 – – –
3 x 4 11.7 905.00 1041.50 15.8 1030.00 1184.50
4 x 6 16.4 974.00 1120.00 28.4 1306.00 1545.50
6 x 6 26.0 1498.00 1723.00 42.2 1997.00 2297.00
8 x 6 39.6 1940.00 2286.50 64.6 3033.00 3583.00
10 x 8 61.6 3170.00 3726.00 103.0 + +
12 x 8 85.8 4783.50 5596.50 133.0 + +
No. L45R
No. L46R

No. W45R AGS Flanged Adapter Nipple
AGS Flanged AGS FLANGED ADAPTER NIPPLES – ANSI 150
Approx.
Adapter Nipple Size x Length Wgt. Ea. AGS Flanged Adapter Nipple – No. W45R *
Refer to publication 20.05 Price Each
14 x 8 122.0 $3816.00 $4579.00
16 x 8 136.0 4625.00 5550.00
18 x 8 168.0 5502.50 6603.00
No. W45R 20 x 8 208.0 7095.00 8513.50
24 x 8 274.0 8084.00 9702.00
26 x 12 254.0 + +
28 x 12 262.0 + +
30 x 12 270.0 + +
32 x 12 278.0 + +
36 x 12 340.0 + +
40 x 12 361.0 + +
42 x 12 372.0 + +
46 x 12 393.0 + +
48 x 12 404.0 + +
54 x 16 372.0 + +
56 x 16 393.0 + +
60 x 16 404.0 + +
* Raised face flanges are standard; flat flanges are quoted on application.
No. LW45R Carbon Steel AGS Flanged Adapter Nipple
Carbon Steel NO. LW45R CARBON STEEL AGS FLANGED ADAPTER NIPPLE
Size x Length 150# Flanged Adapter Nipple No. LW45R Raised Face
AGS Flanged Approx.
Adapter Nipple Wgt. Ea. Price Each
SA352 Grade LCC 14 x 8 128.0 + +
Refer to publication 51.01 16 x 8 149.0 + +
No. LW45R

No. 36 VicBlast Nozzle
VicBlast™ Nozzle VICBLAST NOZZLE
Nominal Size Approx.

inches Wgt. Each Price Each
Air Water lb Endurion Coated
1 ⅜ FPT 1.60 $195.50
Pricing above is for cast fittings only. For fabricated fittings please contact Victaulic for pricing.
No. 36
3D Cast Bends for Abrasive Services
3D Cast Bends 3D CAST BENDS– 90° BEND OR 45° BEND
Fitting Size 90° Bend 45° Bend

FOR ABRASIVE SERVICES Approx. Center to Approx. Center
Refer to publication 07.01 Wgt. Ea. End Price Each Wgt. Ea. to End Price Each
inches lb inches Painted lb inches Painted
2 5.0 10.00 $2565.50 4.7 6.50 $2435.50
3 16.0 13.00 3126.00 10.4 7.75 2939.50
4 22.5 16.00 3489.00 17.2 9.00 3231.50
6 70.0 24.00 4598.50 45.0 13.50 4167.00
90° 3D Cast Bend
45° 3D Cast Bend

Long Radius Bend – 3D
3D Long Radius Steel 3D LONG RADIUS BENDS – 90° BEND, 60° BEND, OR 45° BEND
90° Bend 60° Bend 45° Bend

Bends Nom. Size No. 100-3D No. 14-3D No. 110-3D
Refer to publication 07.02 Approx. Approx. Approx.
Wgt. Ea. Wgt. Ea. Wgt. Ea.
inches lb Price Each lb Price Each lb Price Each
2 5.3 $2565.50 4.3 $2481.50 3.9 $2435.50
2½ 9.5 2740.00 7.7 2597.00 6.7 2577.00
3 14.0 3126.00 11.0 2970.50 9.5 2939.50
4 24.1 3489.00 18.5 3394.00 15.7 3231.50
5 40.9 3919.50 31.3 3805.50 26.5 3584.00
6 63.7 4598.50 48.8 4237.00 41.3 4167.00
No. 100-3D
8 127.8 6038.00 97.9 5322.50 82.9 5183.00
90° Bend
10 226.4 7659.00 173.4 6749.00 146.9 6083.00
12 332.7 9729.50 254.8 8046.50 215.9 7719.00
14 † 427.3 11827.50 327.3 9828.00 277.3 8835.00
16 † 560.1 14338.00 429.0 11958.00 363.5 10773.50
18 † 710.7 19819.00 544.4 16754.50 461.3 15235.50
20 † 879.3 23898.50 673.5 19506.00 570.7 17723.50
No. 14-3D No. 110-3D 24 † 1270.3 33420.00 973.0 27319.50 824.4 23706.00
60° Bend 45° Bend
Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.
† For cut groove systems only. Cut groove systems require the use of Original Groove System (OGS) Style 77 couplings. For roll
groove systems, Victaulic offers Advanced Groove System (AGS) elbows. Please contact Victaulic for pricing and availability.
3D LONG RADIUS BENDS – 30° BEND, 22½° BEND, OR 11¼° BEND
30° Bend 22½° Bend 11¼° Bend

Nom. Size No. 15-3D No. 12-3D No. 13-3D
Approx. Approx. Approx.
No. 15-3D 2 3.4 $2386.50 3.2 $2368.50 2.8 $2342.50
30° Bend 2½ 5.8 2540.50 5.3 2532.50 4.6 2507.00
3 7.3 2904.00 7.3 2881.50 6.2 2858.00
4 12.8 3187.00 11.4 3159.50 9.3 3127.00
5 21.8 3523.50 19.4 3489.00 15.8 3441.00
6 33.9 3886.50 30.1 3851.00 24.6 3793.00
No. 12-3D 8 68.0 4727.00 60.5 4656.00 49.3 4237.00
No. 13-3D
22½° Bend 10 120.5 5416.50 107.2 5347.00 87.3 4821.50
11¼° Bend
12 177.0 6868.00 157.5 6702.50 128.3 5944.00
14 † 227.3 7842.50 202.3 + 164.8 6742.50
16 † 297.9 9577.50 265.2 9325.00 216.0 8261.50
18 † 378.1 13691.00 336.5 12557.00 274.1 11228.00
20 † 467.8 15115.50 416.3 14625.50 339.2 13093.50
24 † 675.7 20115.50 601.4 19423.00 490.0 17280.50
Also available 76.1 mm and 165.1 mm sizes. Contact Victaulic.

Long Radius Bends – 5D

2 7.2 $2752.00 5.6 $2610.50 4.8 $2507.00
2½ 13.3 2835.00 10.2 2740.00 8.6 2625.00
3 19.9 3335.50 15.0 3139.00 12.5 3079.50
4 35.4 3757.50 26.0 3489.00 21.3 3419.50
5 60.0 4424.00 44.1 4085.00 36.1 3827.00
6 93.5 5089.50 68.6 4598.50 56.2 4271.50
No. 100-5D
8 187.6 7043.50 137.7 5873.00 112.8 5615.50
90° Bend
10 332.4 9719.00 244.1 7707.50 199.9 6913.00
12 488.4 12322.00 358.6 10280.50 293.7 8747.50
14 † 627.4 15451.00 460.7 12436.50 377.3 10654.00
16 † 822.2 18588.00 603.8 15007.50 494.5 12905.00
18 † 1043.4 25704.50 766.2 20428.00 627.6 17796.00
20 † 1290.9 30501.50 947.9 23622.50 776.4 20607.00
No. 14-5D No. 110-5D 24 † 1864.8 43099.00 1369.3 33781.50 1121.6 28551.50
60° Bend 45° Bend

No. 15-5D 2 4.0 $2435.50 3.6 $2414.50 3.0 $2355.50
30° Bend 2½ 7.0 + 6.2 2554.00 5.0 2519.00
3 10.0 2939.50 8.8 2916.00 6.9 2868.00
4 16.6 3350.00 14.3 3197.00 10.7 3139.00
5 28.1 3747.00 24.1 3535.00 18.2 3466.50
6 43.8 4167.00 37.6 3897.50 28.3 3814.50
No. 12-5D No. 13-5D 8 87.9 5078.00 75.4 4679.50 56.8 4564.50
22½° Bend 11¼° Bend 10 155.8 6108.00 133.7 5918.50 100.6 5290.00
12 228.9 7730.50 196.4 6959.00 147.8 6072.50
14 † 627.0 9434.00 252.3 8547.00 189.8 7483.50
16 † 385.3 10773.50 330.7 10391.00 248.8 8464.50
18 † 489.0 15176.00 419.7 13850.00 315.7 12244.00
20 † 605.0 17580.50 519.2 16072.50 390.6 13393.50
24 † 873.9 24459.50 750.1 21289.00 564.3 17641.00

Long Radius Bends – 6D

2 8.2 $2823.00 6.3 $2659.50 5.3 $2540.50
2½ 15.2 2951.50 11.4 2775.50 9.5 2717.50
3 22.9 3394.00 17.0 3175.00 14.0 3116.00
4 41.1 3945.00 29.8 3666.00 24.1 3454.00
5 69.6 4518.00 50.5 4144.00 40.9 3874.00
6 108.4 5487.50 78.6 4668.50 63.7 4539.00
No. 100-6D
8 217.5 7649.50 157.7 6388.50 127.8 5746.00
90° Bend
10 385.4 10560.50 279.4 8396.50 226.4 7532.00
12 566.2 13889.00 410.5 11153.50 332.7 9530.50
14 † 727.4 17292.50 527.4 13477.00 427.3 11575.50
16 † 953.3 21409.00 691.1 16230.50 560.1 13981.00
18 † 1209.7 28348.00 877.1 22700.00 710.1 19124.00
20 † 1496.6 33504.00 1085.1 26183.50 879.3 22940.50
No. 14-6D No. 110-6D 24 † 2162.0 48206.50 1567.5 37189.00 1270.3 31674.00
60° Bend 45° Bend

No. 15-6D 2 4.3 $2460.50 3.9 $2426.50 3.2 $2368.50
30° Bend 2½ 7.7 2591.00 6.7 2566.00 5.3 2519.00
3 11.0 2962.50 9.5 2927.50 7.3 2881.50
4 18.5 3372.00 15.7 3219.50 11.4 3149.50
5 31.3 3768.50 26.5 3558.00 19.4 3477.00
6 48.8 4200.00 41.3 4144.00 30.1 3840.00
No. 12-6D 8 97.9 5127.50 82.9 5043.50 60.5 4588.00
No. 13-6D
22½° Bend 11¼° Bend 10 173.4 6668.50 146.9 6013.00 107.2 5311.50
12 254.8 7906.50 215.9 7614.00 157.5 6654.50
14 † 327.3 9662.00 277.3 + 202.3 7567.00
16 † 429.0 11718.50 363.5 10592.00 265.2 9230.00
18 † 544.4 16288.00 461.3 14888.50 336.5 12388.50
20 † 673.5 18873.00 570.7 17245.50 416.3 14389.00
24 † 973.0 26159.00 824.4 22843.50 601.4 18993.00

Schedule 80 3D Long Radius Elbows
No. 100-3D 90° Long Radiu Elbow, No. 110-3D 45° Long Radius Elbow
Schedule 80 3D Long SCHEDULE 80 3D LONG RADIUS CAST DUCTILE IRON ELBOWS – 90° ELBOW AND 45° ELBOW
90° Elbow 45° Elbow

Radius Cast Ductile Nom. Size No. 100-3D No. 110-3D
Iron Elbows Approx. Price Each Approx. Price Each
Wgt. Ea. Wgt. Ea.
Refer to publication 07.12 inches lb Painted Galv. lb Painted Galv.
6 86.3 $1535.00 $1765.00 56.2 $1101.00 $1267.00
8 154.7 3663.50 4213.00 84.0 1913.00 2201.00
NOTE: For use with Victaulic couplings only. Prepare pipe ends in accordance with Publication 25.02.
No. 100-3D
90° Long Radius Elbow
No. 110-3D
45° Long Radius Elbow
SCHEDULE 80 3D LONG RADIUS CAST DUCTILE IRON ELBOWS – 22½° ELBOW, 11¼° ELBOW, AND 6° ELBOW
Nom. 22½° Elbow 11¼° Elbow 6° Elbow

Size No. 12-3D No. 13-3D No. 21-3D
Approx. Price Each Approx. Price Each Approx. Price Each
No. 12-3D inches lb Painted Galv. lb Painted Galv. lb Painted Galv.
22½° Long Radius Elbow 6 41.4 $1054.50 $1212.50 35.6 $1054.50 $1212.50 21.7 $1054.50 $1212.50
8 75.0 1712.00 1969.50 66.1 1712.00 1969.50 31.0 1712.00 1969.50
NOTE: For use with Victaulic couplings only. Prepare pipe ends in accordance with Publication 25.02.
No. 13-3D No. 21-3D
11¼° Long 6° Long Radius
Radius Elbow Elbow

XL Fittings and Couplings
Style XL100/XL77/XL79 90° – 1½D Elbows and Couplings
90° – 1½D Elbows 90° – 1½D ELBOWS AND COUPLINGS
XL100/XL77 System XL100/XL79 System

and Couplings 1 Fitting and 2 Complete 2 Fittings and 1 Complete
Couplings Coupling SPARE
STYLE XL100/XL77/XL79 Nom. Size With Grade “E” or “T” Gasket With Grade “E” or “T” Gasket PARTS
Refer to publication 07.07 Plated Bolt
Approx. Approx. and Nut
Wgt. Ea. Wgt. Ea. Size
inches lb Price Each lb Price Each inches
3 23.7 $585.50 32.0 $610.00 ½ x 2¾
4 37.9 850.00 50.7 897.50 ⅝ x 3¼
Style XL77 Couplings and XL 5 55.5 1691.00 74.5 2117.00 ¾ x 4¼
Fitting 6 70.7 1915.00 101.9 2343.50 ¾ x 4¼
8 93.6 3888.50 189.2 5273.50 ⅞ x 5
10 133.2 7267.50 268.3 10346.00 1 x 6
12 171.2 9357.50 375.3 10902.00 1 x 6½
NOTE: See the Spare Parts section for pricing and availability.
Style XL79 Coupling and XL
Fittings
Style XL110/XL77/XL79 45° – 1½D Elbows and Couplings
45° – 1½D Elbows 45° – 1½D ELBOWS AND COUPLINGS

and Couplings 1 Fitting and 2 Complete 2 Fittings and 1 Complete
3 19.4 $554.50 23.4 $550.50 ½ x 2¾
4 29.8 748.50 34.5 705.00 ⅝ x 3¼
Fitting 6 61.4 1624.50 83.3 1798.50 ¾ x 4¼
8 93.6 2719.50 116.6 3074.00 ⅞ x 5
10 133.2 6006.00 161.9 7974.50 1 x 6
12 171.2 7607.00 221.7 9210.50 1 x 6½
Fittings

Style XL100/XL77/XL79 90° – 3D Elbows and Couplings
90° – 3D Elbows and 90° – 3D ELBOWS AND COUPLINGS

Couplings 1 Fitting and 2 Complete 2 Fittings and 1 Complete
3 35.4 $1247.00 55.4 $1855.50 ½ x 2¾
4 47.8 2137.50 70.5 3315.00 ⅝ x 3¼
Fitting 6 122.4 3507.00 205.3 5336.50 ¾ x 4¼
8 192.6 4935.00 314.6 7239.00 ⅞ x 5
10 336.1 7117.00 637.9 10060.50 1 x 6
12 526.2 21631.50 911.7 14560.00 1 x 6½
Fittings
Style XL110/XL77/XL79 45° – 3D Elbows and Couplings
45° – 3D Elbows and 45° – 3D ELBOWS AND COUPLINGS

Couplings 1 Fitting and 2 Complete 2 Fittings and 1 Complete
3 28.4 $1226.00 41.4 $1814.00 ½ x 2¾
4 44.8 2056.50 64.5 3162.50 ⅝ x 3¼
Fitting 6 109.4 2964.00 179.3 4315.50 ¾ x 4¼
8 158.6 4289.00 246.6 6024.50 ⅞ x 5
10 288.2 6742.50 471.9 9356.50 1 x 6
12 395.2 8085.00 669.7 11428.50 1 x 6½
Fittings

Style XL100/XL110 90° and 45° 1½D Elbows
90° and 45° 1½D 90° AND 45° 1½D ELBOWS
1½ D 1½ D
Elbows Nom. Size XL100 90° Elbow XL110 45° Elbow
Approx. Approx.
STYLE XL100/XL110 Wgt. Ea. Wgt. Ea.
Refer to publication 07.07 inches lb Price Each lb Price Each
3 13.3 $241.00 9.0 $210.00
4 21.1 358.00 13.0 255.00
5 31.1 942.00 20.0 681.00
6 44.3 1027.50 35.0 738.00
8 82.3 2451.00 46.0 1280.50
10 116.2 4924.50 63.0 3663.50
12 166.8 5142.50 90.0 4241.50
Style XL100/XL110 90° and 45° 3D Elbows
90° and 45° 3D 90° AND 45° 3D ELBOWS
3D 3D
Elbows Nom. Size XL100 90° Elbow XL110 45° Elbow
Approx. Approx.
STYLE XL100/XL110 Wgt. Ea. Wgt. Ea.
Refer to publication 07.07 inches lb Price Each lb Price Each
3 25.0 $904.50 18.0 $882.00
4 31.0 1643.50 28.0 1563.50
5 64.6 2117.50 44.0 2037.50
6 96.0 2624.00 83.0 2078.50
8 145.0 3498.00 111.0 2851.00
10 301.0 4773.50 218.0 4398.00
12 435.0 7089.00 314.0 5421.50

Style XL77/XL79 Couplings
Couplings XL COUPLINGS
XL77 XL79
STYLE XL77/XL79 Fitting-to-Pipe Fitting-to-Fitting
Coupling Complete With Grade Coupling Complete With Grade SPARE
Refer to publication 07.07 Nom. Size “E” or “T” Gasket “E” or “T” Gasket PARTS
Plated Bolt
3 5.2 $174.50 5.4 $174.50 ½ x 2¾
4 8.4 252.00 8.5 252.00 ⅝ x 3¼
5 12.2 378.00 12.3 378.00 ¾ x 4¼
6 13.2 446.50 13.3 446.50 ¾ x 4¼
8 23.8 723.00 24.6 723.00 ⅞ x 5
Style XL77 Coupling
10 35.1 1175.50 35.9 1175.50 1 x 6
12 40.6 1335.50 41.7 1335.50 1 x 6½
Style XL79 Coupling
Style DLY Delta-Y Assembly
Delta-Y Assembly * STYLE DLY DELTA-Y ASSEMBLY
Approx.
STYLE DLY Nom. Size Wgt. Each
5 218.4 $13797.50
6 276.2 21527.50
* Victaulic Style DLY Delta-Y is shipped fully assembled.
No. 30 DY Lateral
Lateral LATERAL
Lateral
Refer to publication 07.08 No. 30 DY
Aprx
Nom. Size Wgt. Ea.
5 49.0 $1980.00
6 64.0 +
NOTE: No. 30 DY Lateral has a C to E dimension 5” longer than the standard No. 30 Lateral and is required for use on the Delta-Y
Assembly.
No. 30 DY NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

Extra Heavy “ES” Fittings
Extra Heavy “ES” EndSeal™ Fittings

Elbows and Tees ELBOWS AND TEES – 90° ELBOW, 45° ELBOW, OR TEE
Pipe
Refer to publication 07.03 inches 90° Elbow No. 62 45° Elbow No. 63 Tee No. 64
Price Each
Nominal Size Actual Size Painted Painted Painted
2 2.375 $682.50 $892.50 $1136.00
2½ (sw) 2.875 944.50 892.50 1431.00
No. 62 3 (sw) 3.500 682.50 892.50 1536.50
4 (sw) 4.500 955.00 1182.00 1755.00
6 (sw) 6.625 3490.50 1899.50 3693.00
For sizes to 12”, contact Victaulic.
Steel Full Flow Elbows available with longer center to end dimensions. Contact Victaulic for details.
No. 63
No. 64
Carbon Steel or Stainless Steel (IPS) to Copper (CTS) Dielectric Fittings

Style 647-GT – Groove x Thread
Carbon Steel or STYLE 647-GT – GROOVE X THREAD
PIPE Approx. Wgt.

Stainless Steel (IPS) inches End to End Each
to Copper (CTS) Nominal Size Outside Diameter inches lb Price Each
Dielectric Transition 1 1.315 4.10 0.7 $142.50
1¼ 1.660 4.10 1.0 189.50
Fitting 1½ 1.900 4.10 1.1 220.00
2 2.375 4.10 1.5 224.00
STYLE 647-GT
2½ 2.875 6.10 3.3 300.50
3 3.500 6.10 4.3 538.00
4 4.500 6.10 6.2 719.00
Groove x Thread
Style 647-TT – Thread x Thread
STYLE 647-TT – THREAD X THREAD

STYLE 647-TT
PIPE Approx. Wgt.
Refer to publication 22.21 inches End to End Each
Nominal Size Outside Diameter inches lb Price Each
½ 0.840 3.00 0.2 $78.50
¾ 1.050 3.00 0.3 78.50
Thread x Thread
1 1.315 4.00 0.6 117.50
1¼ 1.660 4.00 0.8 163.50
1½ 1.900 4.00 0.9 196.50
2 2.375 4.00 1.2 224.00
2½ 2.875 6.00 2.9 300.50
3 3.500 6.00 3.7 538.00
4 4.500 6.00 5.3 719.00

Style 647-GG – Groove x Groove
STYLE 647-GG – GROOVE X GROOVE

STYLE 647-GG
PIPE Approx. Wgt.
Refer to publication 22.21 inches End to End Each
Outside Diameter
Carbon Steel/
Stainless Steel
Nominal Size (IPS) Copper (CTS) inches lb Price Each
Groove x Groove
2 2.375 2.125 4.19 1.3 $379.00
2½ 2.875 2.625 6.19 3.0 424.50
3 3.500 3.125 6.19 3.9 649.00
4 4.500 4.125 6.19 5.6 1298.50

SECTION 2 – Equipment Modules
Equipment Modules

Series 381 Suction Inlet Vibration Isolation Pump Drop
Suction Inlet Vibration Isolation

Pump Drop
SERIES 381
SERIES 381 – SUCTION INLET VIBRATION ISOLATION PUMP DROP
Approx.
Pipe x Connection Wgt Each ¥
inches lb Part Code † Price Each
3 x 2 44.9 KC43381PE0 * $10362.50
2½ 50.8 KC49381PE0 * 8377.50
3 52.5 KC59381PE0 * 8445.00
4 x 2 78.3 KD29381PE9 9678.00
2½ 60.3 KD35381PE9 9968.50
3 62.2 KD44381PE9 10408.00
4 65.2 KD65381PE9 11362.00
5 x 2½ 117.4 KE05381PE9 15055.50
3 96.1 KE09381PE9 16450.00
4 99.3 KE16381PE9 14462.00
5 102.2 KM83381PE9 15065.50
6 x 3 152.6 KE71381PE9 15323.00
4 118.6 KE79381PE9 15402.50
5 121.9 KE90381PE9 17025.00
6 124.9 KE98381PE9 17405.50
8 x 4 229.8 KF38381PE9 20661.00
5 188.5 KF42381PE9 21191.50
6 192.1 KF47381PE9 21767.00
8 200.7 KF57381PE9 29789.50
10 x 6 351.2 KF91381PE9 34081.50
8 360.5 KF96381PE9 35805.50
10 372.6 KG01381PE9 40234.00
12 x 8 466.8 KG35381PE9 43032.00
10 481.7 KG39381PE9 46594.50
12 494.6 KG45381PE9 58633.50

¥ Estimated weight using Sch. 40 black carbon steel pipe
† The 1¼” – 18 UNEF female thermometer connection fits most commercially available thermometers with the well removed.
NOTE: A ¾” female NPT thermometer connection is also available. Contact Victaulic for more information.
* This size has a ¾” FNPT supplied as a connection to accept a customer-supplied thermometer well or other accessory; this part code represents that offering.
NOTE: A Victaulic Style 107V Rigid Coupling is required for the installation of this product (not supplied). Refer to Section 1 – Couplings and Fittings for coupling pricing.
For the Series 381 only, a Victaulic Style 177N or Style 77 Flexible Coupling is also required for the installation of this product (not supplied). This flexible coupling needs to be
installed in the piping above the rigid coupling that connects the Series 381 to the rest of the system. Refer to Section 1 – Couplings and Fittings for coupling pricing.

Series 381G Suction Inlet Vibration Isolation Pump Drop – Original Groove System (OGS) End Connection
Suction Inlet Vibration Isolation

Pump Drop
SERIES 381G
SERIES 381G – SUCTION INLET VIBRATION ISOLATION PUMP DROP – ORIGINAL GROOVE SYSTEM (OGS) END CONNECTION
Approx.
Pipe x Connection Wgt Each *
inches lb Part Code † Price Each
4 x 4 95.5 KD65381PG9 $11362.00
5 x 4 105.2 KE16381PG9 14462.00
6 x 4 130.3 KE79381PG9 15402.50
6 204.5 KE98381PG9 17405.50
8 x 6 227.7 KF47381PG9 21767.00
8 375.0 KF57381PG9 29789.50
10 x 6 348.8 KF91381PG9 34081.50
8 437.7 KF96381PG9 35805.50
12 x 8 568.9 KG35381PG9 43032.00

* Estimated weight using Sch. 40 black carbon steel pipe
For the Series 381G only, a Victaulic Style 177N or Style 77 Flexible Coupling is also required for the installation of this product (not supplied). This flexible coupling needs to be
installed in the piping above the rigid coupling that connects the Series 381G to the rest of the system. Refer to Section 1 – Couplings and Fittings for coupling pricing.
S

eries 382 Strainer Inlet Vibration Isolation Pump Drop
Strainer Inlet Vibration

Isolation Pump Drop
SERIES 382
SERIES 382 – STRAINER INLET VIBRATION ISOLATION PUMP DROP
Pipe x Connection Vertical Connection Configuration Horizontal Connection Configuration

Approx. Approx.
Wgt Each ¥ Wgt Each ¥
inches lb Part Code † lb Part Code † Price Each
3 x 2 68.8 KC43382PE0 * 82.3 KC43382PEE * $9895.50
2½ 68.3 KC49382PE0 * 85.0 KC49382PEE * 10049.50
3 66.4 KC59382PE0 * 75.4 KC59382PEE * 9363.50
4 x 2½ 82.6 KD35382PE9 103.2 KD35382PE2 12775.50
3 83.8 KD44382PE9 107.4 KD44382PE2 12839.00
4 78.7 KD65382PE9 102.1 KD65382PE2 12171.00
5 x 2½ 138.7 KE05382PE9 159.8 KE05382PE2 22566.50
3 140.4 KE09382PE9 160.6 KE09382PE2 22526.50
4 99.4 KE16382PE9 163.6 KE16382PE2 20743.50
5 119.0 KM83382PE9 142.2 KM83382PE2 19653.50
6 x 4 166.4 KE79382PE9 185.6 KE79382PE2 19680.00
5 167.8 KE90382PE9 193.3 KE90382PE2 20139.00
6 156.1 KE98382PE9 193.3 KE98382PE2 20962.50
8 x 5 270.0 KF42382PE9 357.1 KF42382PE2 36171.50
6 271.4 KF47382PE9 357.1 KF47382PE2 29612.50
8 255.7 KF57382PE9 363.3 KF57382PE2 30519.00
10 x 6 493.8 KF91382PE9 641.5 KF91382PE2 50668.00
8 502.4 KF96382PE9 550.7 KF96382PE2 43583.50
10 464.5 KG01382PE9 595.2 KG01382PE2 43774.00
12 x 8 630.5 KG35382PE9 816.8 KG35382PE2 68906.00
10 625.2 KG39382PE9 827.8 KG39382PE2 68967.50
12 580.5 KG45382PE9 765.0 KG45382PE2 60478.50

S

eries 382G Strainer Inlet Vibration Isolation Pump Drop – Original Groove System (OGS) End Connection
Strainer Inlet Vibration

Isolation Pump Drop
SERIES 382G
SERIES 382G – STRAINER INLET VIBRATION ISOLATION PUMP DROP – ORIGINAL GROOVE SYSTEM (OGS) END CONNECTION

Approx. Approx.
Wgt Each * Wgt Each *
4 x 4 78.6 KD65382PG9 102.1 KD65382PG2 $12171.00
5 x 4 127.1 KE16382PG9 163.6 KE16382PG2 20743.50
6 x 4 166.5 KE79382PG9 185.6 KE79382PG2 19680.00
6 155.7 KE98382PG9 192.9 KE98382PG2 20962.50
8 x 6 270.8 KF47382PG9 301.0 KF47382PG2 29612.50
8 255.1 KF57382PG9 362.5 KF57382PG2 30519.00
10 x 6 492.7 KF91382PG9 640.1 KF91382PG2 50668.00
8 501.4 KF96382PG9 550.8 KF96382PG2 43583.50
12 x 8 629.3 KG35382PG9 815.0 KG35382PG2 68906.00

S

eries 380 Discharge Outlet Vibration Isolation Pump Drop
Discharge Outlet Vibration

Isolation Pump Drop
SERIES 380
SERIES 380 – DISCHARGE OUTLET VIBRATION ISOLATION PUMP DROP

Approx. Approx.
3 x 2 41.8 KC43380PE0 * 49.4 KC43380PEE * $6605.50
2½ 41.8 KC49380PE0 * 49.4 KC49380PEE * 6830.50
3 39.3 KC59380PE0 * 46.3 KC59380PEE * 6388.50
4 x 2 58.0 KD29380PE9 70.2 KD29380PE2 9148.00
2½ 61.2 KD35380PE9 72.2 KD35380PE2 9363.50
3 62.2 KD44380PE9 73.2 KD44380PE2 9427.00
4 57.6 KD65380PE9 67.2 KD65380PE2 9082.00
5 x 2½ 86.6 KE05380PE9 103.4 KE05380PE2 13982.00
3 88.3 KE09380PE9 105.1 KE09380PE2 13760.50
4 89.2 KE16380PE9 106.0 KE16380PE2 14115.50
5 81.3 KM83380PE9 95.9 KM83380PE2 13460.00
6 x 2 114.2 KE61380PE9 153.3 KE61380PE2 15116.00
2½ 115.5 KE65380PE9 154.6 KE65380PE2 15337.00
3 116.2 KE71380PE9 155.3 KE71380PE2 15333.50
4 117.3 KE79380PE9 136.4 KE79380PE2 15713.50
5 118.4 KE90380PE9 141.4 KE90380PE2 16173.50
6 105.9 KE98380PE9 130.7 KE98380PE2 14814.00
8 x 4 189.5 KF38380PE9 229.1 KF38380PE2 23068.50
5 191.1 KF42380PE9 231.5 KF42380PE2 23251.50
6 192.7 KF47380PE9 222.9 KF47380PE2 23145.00
8 177.0 KF57380PE9 212.8 KF57380PE2 21694.00
10 x 5 422.1 KF89380PE9 508.0 KF89380PE2 42532.00
6 410.4 KF91380PE9 496.3 KF91380PE2 39860.00
8 419.1 KF96380PE9 467.9 KF96380PE2 37771.00
10 376.9 KG01380PE9 467.0 KG01380PE2 36787.50
12 x 6 534.2 KG32380PE9 636.4 KG32380PE2 47746.00
8 542.1 KG35380PE9 644.6 KG35380PE2 46862.50
10 536.7 KG39380PE9 644.3 KG39380PE2 47805.00
12 489.2 KG45380PE9 595.3 KG45380PE2 42126.50


Series 380G Discharge Outlet Vibration Isolation Pump Drop – Original Groove System (OGS) End Connection
Discharge Outlet Vibration

Isolation Pump Drop
SERIES 380G
SERIES 380G – DISCHARGE OUTLET VIBRATION ISOLATION PUMP DROP – ORIGINAL GROOVE SYSTEM (OGS) END CONNECTION

Approx. Approx.
4 x 4 57.6 KD65380PG9 67.2 KD65380PG2 $9082.00
5 x 4 89.2 KE16380PG9 106.0 KE16380PG2 14115.50
6 x 4 117.3 KE79380PG9 136.4 KE79380PG2 15713.50
6 105.9 KE98380PG9 130.7 KE98380PG2 14814.00
8 x 4 189.5 KF38380PG9 229.1 KF38380PG2 23068.50
6 192.7 KF47380PG9 229.1 KF47380PG2 23145.00
8 177.0 KF57380PG9 212.8 KF57380PG2 21694.00
10 x 6 410.4 KF91380PG9 496.3 KF91380PG2 39860.00
8 419.1 KF96380PG9 467.9 KF96380PG2 37771.00
12 x 6 534.2 KG32380PG9 636.4 KG32380PG2 47746.00
8 542.1 KG35380PG9 644.6 KG35380PG2 46862.50


Series 383 Discharge CBV Outlet Vibration Isolation Pump Drop
Discharge CBV Outlet

Vibration Isolation Pump Drop
SERIES 383
SERIES 383 – DISCHARGE CBV OUTLET VIBRATION ISOLATION PUMP DROP
Vertical Connection
Pipe x Connection Configuration Horizontal Connection Configuration
Approx. Approx.
3 x 2 53.3 KC43383PE0 * 60.9 KC43383PEE * $7168.50
2½ 55.2 KC49383PE0 * 62.8 KC49383PEE * 7392.50
3 50.8 KC59383PE0 * 57.8 KC59383PEE * 6972.00
4 x 2 77.2 KD29383PE9 89.4 KD29383PE2 10303.50
2½ 80.4 KD35383PE9 91.4 KD35383PE2 10520.00
3 81.4 KD44383PE9 92.4 KD44383PE2 10583.00
4 76.8 KD65383PE9 81.4 KD65383PE2 10239.00
5 x 2½ 115.0 KE05383PE9 131.8 KE05383PE2 16142.00
3 116.7 KE09383PE9 133.5 KE09383PE2 15920.00
4 117.6 KE16383PE9 134.5 KE16383PE2 16282.00
5 109.7 KM83383PE9 124.3 KM83383PE2 15620.00
6 x 2½ 191.9 KE65383PE9 217.3 KE65383PE2 19445.50
3 160.4 KE71383PE9 199.5 KE71383PE2 19441.50
4 161.5 KE79383PE9 180.6 KE79383PE2 19822.50
5 162.6 KE90383PE9 185.6 KE90383PE2 20282.00
6 150.1 KE98383PE9 174.9 KE98383PE2 18922.50
8 x 4 291.2 KF38383PE9 330.8 KF38383PE2 33909.00
5 292.8 KF42383PE9 333.2 KF42383PE2 34091.50
6 294.4 KF47383PE9 324.6 KF47383PE2 33986.00
8 278.7 KF57383PE9 314.5 KF57383PE2 32533.00
10 x 6 530.9 KF91383PE9 616.8 KF91383PE2 53935.00
8 539.6 KF96383PE9 588.4 KF96383PE2 51846.50
10 497.4 KG01383PE9 587.5 KG01383PE2 50863.50
12 x 8 724.6 KG35383PE9 836.8 KG35383PE2 88215.00
10 719.2 KG39383PE9 831.4 KG39383PE2 89157.00
12 671.7 KG45383PE9 777.8 KG45383PE2 83480.00


Series 383G Discharge CBV Outlet Vibration Isolation Pump Drop – Original Groove System (OGS) End Connection
Discharge CBV Outlet

Vibration Isolation Pump Drop
SERIES 383G
SERIES 383G – DISCHARGE CBV OUTLET VIBRATION ISOLATION PUMP DROP – ORIGINAL GROOVE SYSTEM (OGS) END CONNECTION
Vertical Connection
Pipe x Connection Configuration Horizontal Connection Configuration
Approx. Approx.
4 x 4 76.8 KD65383PG9 81.4 KD65383PG2 $10239.00
5 x 4 117.6 KE16383PG9 134.5 KE16383PG2 16282.00
6 x 4 161.5 KE79383PG9 180.6 KE79383PG2 19822.50
6 150.1 KE98383PG9 174.9 KE98383PG2 18922.50
8 x 4 291.2 KF38383PG9 330.8 KF38383PG2 33909.00
6 294.4 KF47383PG9 324.6 KF47383PG2 33986.00
8 278.7 KF57383PG9 314.5 KF57383PG2 32533.00
10 x 6 530.9 KF91383PG9 616.8 KF91383PG2 53935.00
8 539.6 KF96383PG9 588.4 KF96383PG2 51846.50
12 x 8 724.6 KG35383PG9 836.8 KG35383PG2 88215.00


No. 26/W26 Outlet Fitting
Outlet Fitting NO. 26/W26 OUTLET FITTING – CARBON STEEL STANDARD WEIGHT PAINTED ORANGE
Pipe Number of Outlets Pipe Number of Outlets

NO. 26/W26 Nominal Outlet Pipe Nominal Outlet Pipe
Size Size Length Size Size Length
Refer to publication 07.11 D d L 1–3 4–6 D d L 1–3 4–6
inches ft Price Each inches ft Price Each
2–4 + + 8 – 12 + +
>4–8 + + 12 4 – 12 > 12 – 16 + +
2 ¾ – 2 > 8 – 12 + + > 16 – 21 + +
> 12 – 16 + + 14 – 16 + +
14 4 – 14
> 16 – 21 + + > 16 – 21 + +
2–4 + + 14 – 16 + +
4 – 10
>4–8 + + > 16 – 21 + +
16
2½ ¾ – 2½ > 8 – 12 + + 14 – 16 + +
12 – 16
> 12 – 16 + + > 16 – 21 + +
> 16 – 21 + + 14 – 16 + +
4 – 10
2–4 + + > 16 – 21 + +
>4–8 + + 14 – 16 + +
18 12 – 14
3 ¾ – 3 > 8 – 12 + + > 16 – 21 + +
> 12 – 16 + + 14 – 16 + +
16 – 18
> 16 – 21 + + > 16 – 21 + +
2–4 + + 14 – 16 + +
4 – 10
>4–8 + + > 16 – 21 + +
4 ¾ – 4 > 8 – 12 + + 14 – 16 + +
20 12 – 14
> 12 – 16 + + > 16 – 21 + +
> 16 – 21 + + 14 – 16 + +
16 – 20
2–4 + + > 16 – 21 + +
>4–8 + + 14 – 16 + +
4 – 10
6 ¾ – 6 > 8 – 12 + + > 16 – 21 + +
> 12 – 16 + + 14 – 16 + +
12 – 14
> 16 – 21 + + > 16 – 21 + +
24
2–4 + + 14 – 16 + +
16 – 18
>4–8 + + > 16 – 21 + +
8 2–8 > 8 – 12 + + 14 – 16 + +
20 – 24
> 12 – 16 + + > 16 – 21 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
10 4 – 10 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +

Contact Victaulic for other pipe materials, finishes, or sizes.
NOTE: No. 26/W26 Outlet Fitting available with optional Style 107N Rigid Coupling, Series 761 Vic-300 MasterSeal™ Butterfly
Valve, and/or No. 60 Cap. Refer to Section 1 – Couplings and Fittings and/or Section 4 – Valves and Specialties for coupling,
valve, and cap pricing.
Please see publication 07.11 for additional dimensions that will be required at time of order.
Pricing as outlined above is for up to the listed number of branches regardless of size. If an additional tap(s) for instrumentation/
vent are needed, that would exceed the listed number of branches, taps in the following sizes: ¾”, 1”, 1¼”, 1½”, or 2” can be
added at a cost of $658.50 per tap.

Isolation Outlet STYLE 929 – ISOLATION OUTLET
Nominal Size
STYLE 929
inches Victaulic Part Code Price Each
½ CB5792NBE0 $765.00
¾ CB5992NBE0 765.00
2 x 1 CB60929BE0 765.00
1¼ CB64929BE0 765.00
1½ CB67929BE0 765.00
½ CB94929BE0 809.00
¾ CB97929BE0 809.00
2½ x 1 CC00929BE0 809.00
1¼ CC01929BE0 809.00
1½ CC03929BE0 809.00
½ CC36929BE0 976.50
¾ CC37929BE0 976.50
1 CC38929BE0 976.50
3 x
1¼ CC39929BE0 976.50
1½ CC40929BE0 976.50
2 CC43929BE0 976.50
½ CD19929BE0 991.50
¾ CD20929BE0 991.50
1 CD22929BE0 991.50
4 x
1¼ CD24929BE0 991.50
1½ CD25929BE0 991.50
2 CD29929BE0 991.50
1½ CE58929BE0 1068.00
6 x
2 CE61929BE0 1068.00
8 x 2 CF30929BE0 1355.00

Style 929D Isolation Outlet
Isolation Outlet STYLE 929D – ISOLATION OUTLET
Nominal Size
STYLE 929D (DIELECTRIC) inches Victaulic Part Code Price Each
Refer to publication 102.50 ½ CB5792NBED $859.00
¾ CB5992NBED 859.00
2 x 1 CB60929BED 859.00
1¼ CB64929BED 859.00
1½ CB67929BED 859.00
½ CB94929BED 902.50
¾ CB97929BED 902.50
2½ x 1 CC00929BED 902.50
1¼ CC01929BED 902.50
1½ CC03929BED 902.50
½ CC36929BED 1103.00
¾ CC37929BED 1103.00
1 CC38929BED 1103.00
3 x
1¼ CC39929BED 1103.00
1½ CC40929BED 1103.00
2 CC43929BED 1103.00
½ CD19929BED 1118.00
¾ CD20929BED 1118.00
1 CD22929BED 1118.00
4 x
1¼ CD24929BED 1118.00
1½ CD25929BED 1118.00
2 CD29929BED 1118.00
1½ CE58929BED 1195.00
6 x
2 CE61929BED 1195.00
8 x 2 CF30929BED 1481.50

Nominal Size
STYLE 429 inches Victaulic Part Code Price Each
Refer to publication 102.50 ¾ CB59429XE0 $744.50
2 x
1 CB60429XE0 744.50
¾ CB97429XE0 783.50
2½ x
1 CC00429XE0 783.50
¾ CC37429XE0 1189.00
1 CC38429XE0 1189.00
3 x
1½ CC40429XE0 1189.00
2 CC43429XE0 1189.00
¾ CD20429XE0 1277.50
1 CD22429XE0 1277.50
4 x
1½ CD25429XE0 1277.50
2 CD29429XE0 1277.50
¾ CK62429XE0 1451.50
1 CE55429XE0 1451.50
6 x
1½ CE58429XE0 1451.50
2 CE61429XE0 1451.50
¾ CR51429XE0 1768.00
1 CL10429XE0 1768.00
8 x
1½ CK74429XE0 1768.00
2 CF30429XE0 1768.00
¾ CM20429XE0 2698.50
1 CL72429XE0 2698.50
10 x
1½ CK85429XE0 2698.50
2 CF86429XE0 2698.50
Nominal Size
STYLE 629 inches Victaulic Part Code Price Each
Refer to publication 102.50 ¾ CB97629CP0 $1392.00
2½ x 1 CC00629CP0 1392.00
1½ CC03629CP0 1392.00
¾ CC37629CP0 1424.50
3 x 1 CC38629CP0 1424.50
1½ CC40629CP0 1424.50
¾ CD20629CP0 1482.00
4 x 1 CD22629CP0 1482.00
1½ CD25629CP0 1482.00

Style 156 Mining Header
Mining Header STYLE 156 – MINING HEADER
3 Outlet with Grade 4 Outlet with Grade 5 Outlet with Grade 6 Outlet with
STYLE 156 “E” or “T” Gasket / “E” or “T” Gasket / “E” or “T” Gasket / Grade “E” or “T”
Pipe x Connection Valve Seat Valve Seat Valve Seat Gasket / Valve Seat
Approx. Approx. Approx. Approx.
Wgt Wgt Wgt Wgt
Each Price Each Price Each Price Each Price
inches lb Each lb Each lb Each lb Each
2 35.3 $4132.50 38.7 $4429.00 42.5 $5192.00 45.9 $5267.00
2½ x 1 43.4 4291.50 47.0 4593.00 55.4 5432.50 58.9 5507.50
3 54.7 4783.50 58.0 5409.00 68.1 5910.00 71.5 6230.00
Style 156 Header is available with 12 or 40 mesh strainer basket (standard). Specify at time of order.
Series 387 Inline Modular Dual Pump Skid
Inline Modular Dual SERIES 387 – INLINE MODULAR DUAL PUMP SKID
Approx. Weight Each *

Pump Skid Inline Dual Pump Skid lb Price Each
Series 387A 577.7 +
SERIES 387
Refer to publication 102.87 Series 387B 1647.7 +
Series 387A: For inline pump connection size 3”
Series 387B: For inline pump connection sizes 4 - 10”
* The customer will free issue the pumps to Victaulic to be included in the Series 387 Inline Modular Dual Pump Skid. The
weight listed here does not include the pumps.
Series 388 End Suction Modular Dual Pump Skid
End Suction Modular SERIES 388 – END SUCTION MODULAR DUAL PUMP SKID
Approx. Weight Each *

Dual Pump Skid End Suction Dual Pump Skid
lb Price Each
Series 388A 614.1 +
SERIES 388
Refer to publication 102.87 Series 388B 1503.7 +
Series 388A: For end suction pump connection sizes 2½ – 3½”
Series 388B: For end suction pump connection sizes 4 – 10”
* The customer will free issue the pumps to Victaulic to be included in the Series 388 End Suction Modular Dual Pump Skid. The
weight listed here does not include the pumps.

Rigid OGS Carbon Steel Long Run Fittings
Rigid OGS Carbon RIGID OGS CARBON STEEL LONG RUN FITTINGS
No. R10 No. R11 No. R12

Steel Long Run End to End to End to
Fittings Nom. End Approx. Price End Approx. Price End Approx. Price
Size Length Wgt. Ea. Each Length Wgt. Ea. Each Length Wgt. Ea. Each
inches inches lb Painted inches lb Painted inches lb Painted
2½ 243.90 122.2 $1455.50 242.40 121.2 $1455.50 247.65 123.3 $1542.00
3 244.40 160.2 1753.00 242.65 158.8 1753.00 248.65 162.5 1807.50
4 245.15 228.2 2152.00 243.15 226.7 2152.00 250.15 233.0 2358.00
No. R10
5 245.65 310.7 3284.00 243.40 307.3 3284.00 251.15 316.8 3748.00
6 246.65 405.4 4053.50 243.65 399.0 4053.50 253.15 413.9 4571.50
8 247.97 615.0 6295.00 244.47 605.5 6295.00 255.72 632.7 7525.00
No. R11 10 249.20 896.9 10086.50 244.95 871.1 8949.00 258.20 932.6 10723.50
12 250.20 1123.2 11215.50 245.45 1115.9 10173.00 260.20 1182.2 12690.00
RIGID OGS CARBON STEEL LONG RUN FITTINGS
No. R13 No. R14 No. R15

No. R12
End to End to End to
Nom. End Approx. Price End Approx. Price End Approx. Price
2½ 123.90 64.2 $1122.50 122.40 63.2 $1122.50 127.65 65.3 $1209.00
3 124.40 84.2 1343.50 122.65 82.8 1343.50 128.65 86.5 1398.00
4 125.15 120.2 1589.00 123.15 118.7 1589.00 130.15 125.0 1795.00
5 125.65 164.7 2464.50 123.40 161.3 2464.50 131.15 170.8 2929.50
6 126.65 215.4 2962.00 123.65 209.0 2962.00 133.15 223.9 3479.50
8 127.97 330.0 4657.50 124.47 320.5 4657.50 135.72 347.7 5888.50
10 129.20 491.9 7684.50 124.95 466.1 6547.00 138.20 527.6 8321.50
12 130.20 612.2 8486.00 125.45 604.9 7444.00 140.20 671.2 9960.50

Flexible OGS Carbon Steel Long Run Fittings
Flexible OGS Carbon FLEXIBLE OGS CARBON STEEL LONG RUN FITTINGS
No. R20 No. R21 No. R22

2½ 244.00 121.6 $1521.00 242.50 120.6 $1521.00 247.75 122.7 $1607.00
3 244.50 159.6 1749.00 242.75 158.2 1749.00 248.75 161.9 1805.50
4 245.38 226.8 2157.50 243.38 225.3 2157.50 250.38 231.6 2363.50
No. R20
5 245.88 308.5 3366.00 243.63 305.1 3366.00 251.38 314.6 3830.50
6 246.88 403.5 4083.50 243.88 397.1 4083.50 253.38 412.0 4603.00
8 248.13 609.9 6404.50 244.63 600.4 6404.50 255.88 627.6 7635.00
No. R21 10 249.13 883.8 9991.50 244.88 858.0 8853.00 258.13 919.5 10627.00
12 250.13 1123.8 11130.00 245.38 1116.5 10088.50 260.13 1182.8 12606.50
FLEXIBLE OGS CARBON STEEL LONG RUN FITTINGS
No. R23 No. R24 No. R25

No. R22
2½ 124.00 63.6 $1188.00 122.50 62.6 $1188.00 127.75 64.7 $1274.00
3 124.50 83.6 1339.50 122.75 82.2 1339.50 128.75 85.9 1396.00
4 125.38 118.8 2157.50 123.38 117.3 2157.50 130.38 123.6 2363.50
5 125.88 162.5 2992.00 123.63 159.1 3366.00 131.38 168.6 3511.00
6 126.88 213.5 2992.00 123.88 207.1 2992.00 133.38 222.0 3511.00
8 128.13 324.9 4767.50 124.63 315.4 4767.50 135.88 342.6 5998.00
10 129.13 478.8 7590.00 124.88 453.0 6451.00 138.13 514.5 8225.00
12 130.13 612.8 8401.00 125.38 605.5 7359.50 140.13 671.8 9877.50
Rigid AGS Carbon Steel Long Run Fittings
Rigid AGS Carbon RIGID AGS CARBON STEEL LONG RUN FITTINGS
No. WR10 No. WR11 No. WR12
14 254.25 1291.8 $14956.00 246.05 1204.0 $14085.00 262.25 1243.0 $16131.50
16 256.25 1497.3 14456.00 246.88 1406.8 12875.00 264.25 1436.0 15196.00
18 258.25 1755.3 24221.00 247.71 1612.0 21930.00 267.25 1764.0 25058.50
No. WR10
20 260.25 1966.0 23243.50 248.53 1819.3 20208.50 270.25 2004.0 25101.00
24 264.25 2407.8 36961.50 250.19 2112.5 32959.50 274.25 2351.7 40368.00
RIGID AGS CARBON STEEL LONG RUN FITTINGS
No. WR11 No. WR13 No. WR14 No. WR15
No. WR12 inches inches lb Painted inches lb Painted inches lb Painted
14 134.25 745.8 $10370.50 126.05 658.0 $9499.50 142.25 697.0 $11546.00
16 136.25 871.3 10853.50 126.88 780.8 9272.50 144.25 810.0 11593.00
18 138.25 1049.3 16469.50 127.71 906.0 14179.00 147.25 1058.0 17307.50
20 140.25 1180.0 17238.00 128.53 1033.3 14203.50 150.25 1218.0 19096.50
24 144.25 1541.8 26152.50 130.19 1246.5 22151.00 154.25 1485.7 29559.50

Flexible AGS Carbon Steel Long Run Fittings
Flexible AGS FLEXIBLE AGS CARBON STEEL LONG RUN FITTINGS
No. WR20 No. WR21 No. WR22

Carbon Steel End to End to End to
Long Run Fittings Nom. End Approx. Price End Approx. Price End Approx. Price
14 254.31 1290.8 $14715.00 246.11 1203.0 $13844.50 262.31 1242.0 $15891.00
16 256.31 1494.3 14516.50 246.94 1403.8 12936.00 264.31 1433.0 15257.00
18 258.31 1749.3 24318.50 247.77 1606.0 22028.50 267.31 1758.0 25156.50
No. WR20
20 260.31 1966.0 23313.50 248.59 1819.3 20281.00 270.31 2004.0 25172.00
24 264.31 2398.8 37074.00 250.25 2103.5 33073.50 274.31 2342.7 40480.00
RIGID AGS CARBON STEEL LONG RUN FITTINGS
No. WR21 No. WR23 No. WR24 No. WR25
No. WR22 inches inches lb Painted inches lb Painted inches lb Painted
14 134.31 744.8 $10129.50 126.11 657.0 $9258.50 142.31 696.0 $11305.00
16 136.31 868.3 10914.50 126.94 777.8 9333.50 144.31 807.0 11654.00
18 138.31 1043.3 16567.00 127.77 900.0 14277.00 147.31 1052.0 17404.50
20 140.31 1180.0 17309.50 128.59 1033.3 14276.00 150.31 1218.0 19168.00
24 144.31 1532.8 26265.00 130.25 1237.5 22265.00 154.31 1476.7 29671.50

Series 385 Vibration Isolation Air Handling Unit Drops
Vibration Isolation Air SERIES 385A – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – SINGLE COIL
Pipe x Connection Approx. Weight Each

Handling Unit Drop – inches lb Victaulic Part Code Price Each
Supply – Single Coil 2 x 2 57.9 K020385AE0 $10021.00
2½ x 2 61.7 KC07385AE0 10459.00
SERIES 385A
2½ 70.6 K024385AE0 10987.50
3 x 2½ 71.7 KC49385AE0 11801.00
3 83.4 K030385AE0 12413.50
4 x 3 68.2 KD44385AE0 13720.50
4 138.9 K040385AE0 14906.00
Vibration Isolation Air SERIES 385B – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – DOUBLE COIL/DOUBLE STRAINER

Supply – Double Coil/ 2½ x 2 164.1 KC07385BE0 $23820.00
Double Strainer 3 x 2 171.1 KC43385BE0 22752.50
2½ 180.8 KC49385BE0 25801.00
SERIES 385B 4 x 2½ 191.5 KD35385BE0 25527.50
Refer to publication 102.15 3 248.3 KD44385BE0 28124.50
6 x 4 392.5 KE79385BE0 35815.50
Vibration Isolation Air SERIES 385C – VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – DOUBLE COIL/SINGLE STRAINER

Supply – Double Coil/ 2½ x 2 144.1 KC07385CE0 $19710.00
Single Strainer 3 x 2 151.1 KC43385CE0 19684.00
2½ 180.8 KC49385CE0 21835.00
SERIES 385C 4 x 2½ 203.5 KD35385CE0 22986.00
Refer to publication 102.15 3 234.3 KD44385CE0 24093.50
6 x 4 382.5 KE79385CE0 33709.50

Vibration Isolation Air SERIES 385D – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – SINGLE COIL

Return – Single Coil 2 x 2 40.0 K020385DE0 $5882.00
2½ x 2 43.8 KC07385DE0 6854.00
SERIES 385D
2½ 49.1 K024385DE0 8554.50
3 x 2½ 60.6 KC49385DE0 9538.50
3 60.2 K030385DE0 11525.50
4 x 3 64.3 KD44385DE0 12650.00
4 105.9 K040385DE0 16101.00
Vibration Isolation Air SERIES 385E – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – DOUBLE COIL/DOUBLE BALANCING VALVE

Return – Double Coil/ 2½ x 2 112.2 KC07385EE0 $15512.00
Double Balancing 3 x 2 128.5 KC43385EE0 14547.50
Valve 2½ 163.8 KC49385EE0 20767.50
4 x 2½ 167.8 KD35385EE0 20678.00
SERIES 385E 3 185.7 KD44385EE0 27210.00
Refer to publication 102.15 6 x 4 326.5 KE79385EE0 38203.50
Vibration Isolation Air SERIES 385F – VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – DOUBLE COIL/SINGLE BALANCING VALVE

Return – Double Coil/ 2½ x 2 106.2 KC07385FE0 $15303.00
Single Balancing Valve 3 x 2 123.5 KC43385FE0 14342.50
2½ 150.8 KC49385FE0 19116.50
SERIES 385F 4 x 2½ 169.4 KD35385FE0 19421.00
Refer to publication 102.15 3 185.7 KD44385FE0 21472.00
6 x 4 317.5 KE79385FE0 34170.00

Low Profile Vibration SERIES 385G – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – SUPPLY – SINGLE COIL

Isolation Air Handling inches lb Victaulic Part Code Price Each
Unit Drop – Supply – 2 x 2 51.9 K020385GE0 $1136.00
Single Coil 2½ x 2 63.6 KC07385GE0 9200.00
2½ 58.4 K024385GE0 10256.50
SERIES 385G 3 x 2½ 84.1 KC49385GE0 10682.00
Refer to publication 102.15 3 80.2 K030385GE0 11215.50
4 x 3 126.2 KD44385GE0 12134.50
4 133.8 K040385GE0 13258.50
Low Profile Vibration SERIES 385H – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – DOUBLE COIL/SINGLE STRAINER

Unit Drop – Supply – 2½ x 2 72.5 KC07385HE0 $11563.00
Double Coil/Single 3 x 2 89.0 KC43385HE0 12334.50
Strainer 2½ 94.1 KC49385HE0 12799.50
4 x 2½ 133.6 KD35385HE0 14473.50
SERIES 385H 3 139.2 KD44385HE0 15051.00
Refer to publication 102.15 6 x 4 251.3 KE79385HE0 23916.50
Low Profile Vibration SERIES 385I – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – RETURN – SINGLE COIL

Unit Drop – Return – 2 x 2 29.2 K020385IE0 $4630.50
Single Coil 2½ x 2 45.4 KC07385IE0 7258.00
2½ 43.1 K024385IE0 7559.00
SERIES 385I 3 x 2½ 64.8 KC49385IE0 10000.00
Refer to publication 102.15 3 61.7 K030385IE0 10532.50
4 x 3 96.5 KD44385IE0 13460.00
4 96.9 K040385IE0 14155.00

Low Profile Vibration SERIES 385J – LOW PROFILE VIBRATION ISOLATION AIR HANDLING UNIT DROP – DOUBLE COIL/SINGLE BALANCING VALVE

Unit Drop – Return – 2½ x 2 52.7 KC07385JE0 $7742.50
Double Coil/Single 3 x 2 72.9 KC43385JE0 12257.00
Balancing Valve 2½ 73.4 KC49385JE0 12798.50
4 x 2½ 98.5 KD35385JE0 16460.00
SERIES 385J 3 103.9 KD44385JE0 16634.00
Refer to publication 102.15 6 x 4 208.3 KE79385JE0 34154.00

Series 386 Pressure Reducing Valve (PRV) Stations
Pressure Reducing SERIES 386A SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS
Primary x Low-Flow Approx.

Valve (PRV) Stations Bypass Weight Each
inches lb Victaulic Part Code Price Each
SERIES 386
2 x 1½ 262.0 KB67386AEB $34286.00
2½ x 1½ 277.0 KC03386AEB 35115.50
3 x 1½ 324.0 KC40386AEB 39502.50
2 332.0 KC43386AEB 39836.00
4 x 1½ 406.0 KD25386AEB 44341.50
2 416.0 KD29386AEB 44340.00
3 451.2 KD44386AEB 49945.00
6 x 2 609.0 KE61386AEB 63891.00
SERIES 386B TWO STAGE PRV STATION WITH LOW-FLOW BYPASS

Bypass Weight Each
2 x 1½ 304.0 KB67386BEB $43119.50
2½ x 1½ 324.0 KC03386BEB 45189.00
3 x 1½ 395.0 KC40386BEB 48823.50
2 406.0 KC43386BEB 49240.50
4 x 1½ 493.0 KD25386BEB 55075.00
2 525.0 KD29386BEB 55157.00
6 x 2 786.0 KE61386BEB 81125.50
Pressure Reducing SERIES 386C SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS AND “WATCHDOG” COMBINATION

Valve (PRV) Stations Bypass Weight Each
SERIES 386
2 x 1½ 288.0 KB67386CEB $51252.50
2½ x 1½ 312.0 KC03386CEB 53298.00
3 x 1½ 370.0 KC40386CEB 57718.50
2 397.0 KC43386CEB 58120.50
4 x 1½ 501.0 KD25386CEB 63816.00
2 512.0 KD29386CEB 63883.00
6 x 2 777.0 KE61386CEB 89633.00
SERIES 386D TWO STAGE PRV STATION WITH LOW-FLOW BYPASS AND “WATCHDOG” COMBINATION

Bypass Weight Each
2 x 1½ 343.0 KB67386DEB $60680.50
2½ x 1½ 451.0 KC03386DEB 63210.50
3 x 1½ 460.0 KC40386DEB 67633.00
2 473.0 KC43386DEB 68129.00
4 x 1½ 604.0 KD25386DEB 75159.00
2 620.0 KD29386DEB 75320.50
6 x 2 954.0 KE61386DEB 107472.50

Pressure Reducing SERIES 386E SINGLE STAGE PRV STATION WITH LOW-FLOW BYPASS, REDUNDANT BRANCH AND EXCESSIVE PRESSURE
SHUT-OFF VALVE
Valve (PRV) Stations Primary x Low-Flow Approx.

Bypass Weight Each
SERIES 386 inches lb Victaulic Part Code Price Each
Refer to publication 102.16 2 x 1½ 444.0 KB67386EEB $70716.50
2½ x 1½ 480.0 KC03386EEB 75699.00
3 x 1½ 633.0 KC40386EEB 84734.50
2 640.0 KC43386EEB 84983.50
4 x 1½ 879.0 KD25386EEB 98222.50
2 885.0 KD29386EEB 98136.00
6 x 2 + + +
SERIES 386F TWO STAGE PRV STATION WITH LOW-FLOW BYPASS, REDUNDANT BRANCH AND EXCESSIVE PRESSURE SHUT-OFF
VALVE

Bypass Weight Each
2 x 1½ 538.0 KB67386FEB $84574.50
2½ x 1½ 572.0 KC03386FEB 90313.50
3 x 1½ 761.0 KC40386FEB 99637.50
2 775.0 KC43386FEB 99969.50
4 x 1½ 1069.0 KD25386FEB 115998.50
2 1080.0 KD29386FEB 115996.00
6 x 2 + + +


Series 386-SB Single Branch Pressure Reducing Valve (PRV) Stations
Single Branch SERIES 386A-SB SINGLE STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS
Approx.
Pressure Reducing Nominal Size Weight Each
Valve (PRV) Station inches lb Victaulic Part Code Price Each
with Integral Low-Flow 1½ 57.1 K014386AES $14538.50
2 72.8 K020386AES 14894.50
Bypass 2½ 87.3 K024386AES 17667.00
3 125.4 K030386AES 20084.00
SERIES 386-SB
4 205.8 K040386AES 24455.50
6 308.4 K060386AES 36114.00
SERIES 386B-SB TWO STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS
Approx.
Nominal Size Weight Each
1½ 71.0 K014386BES $19692.50
2 95.3 K020386BES 21612.00
2½ 114.8 K024386BES 25024.50
3 198.7 K030386BES 25806.50
4 335.3 K040386BES 31990.50
6 548.7 K060386BES 51043.00
SERIES 386C-SB SINGLE STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS & “WATCHDOG”
COMBINATION
Approx.
1½ 65.2 K014386CES $24491.50
2 82.9 K020386CES 24917.50
2½ 101.2 K024386CES 28117.00
3 146.1 K030386CES 31636.00
4 246.8 K040386CES 37464.50
6 442.6 K060386CES 56516.50
SERIES 386D-SB TWO STAGE, SINGLE BRANCH PRV STATION WITH INTEGRAL LOW-FLOW BYPASS & “WATCHDOG” COMBINATION
Approx.
1½ 86.7 K014386DES $29645.00
2 110.1 K020386DES 31636.00
2½ 131.8 K024386DES 35475.00
3 199.7 K030386DES 37323.00
4 336.4 K040386DES 48625.50
6 616.7 K060386DES 71445.50

Series 386-V Vertical Pressure Reducing Valve (PRV) Stations
Vertical Pressure SERIES 386A-V SINGLE STAGE VERTICAL PRV STATION WITH LOW-FLOW BYPASS

Reducing Valve (PRV) Bypass Weight Each
Station inches lb Victaulic Part Code Price Each
2 x 1½ 295.6 KB67386AEV $34285.50
SERIES 386-V 2½ x 1½ 316.3 KC03386AEV 35115.50
Refer to publication 102.19 3 x 1½ 350.9 KC40386AEV 39502.50
2 378.4 KC43386AEV 39836.00
4 x 1½ 514.5 KD25386AEV 44341.50
2 532.0 KD29386AEV 44340.00
3 588.3 KD44386AEV 49945.00
SERIES 386B-V TWO STAGE VERTICAL PRV STATION WITH LOW-FLOW BYPASS

Bypass Weight Each
2 x 1½ 345.5 KB67386BEV $43119.50
2½ x 1½ 371.4 KC03386BEV 45189.00
3 x 1½ 428.9 KC40386BEV 48823.50
2 459.9 KC43386BEV 49240.50
4 x 1½ 626.4 KD25386BEV 55075.00
2 647.7 KD29386BEV 55157.00
SERIES 386C-V SINGLE STAGE VERTICAL PRV STATION WITH LOW-FLOW BYPASS & “WATCHDOG” COMBINATION

Bypass Weight Each
2 x 1½ 309.6 KB67386CEV $51252.50
2½ x 1½ 330.4 KC03386CEV 53298.00
3 x 1½ 377.7 KC40386CEV 57718.50
2 408.8 KC43386CEV 58120.50
4 x 1½ 494.6 KD25386CEV 63816.00
2 516.4 KD29386CEV 63883.00
SERIES 386D-V TWO STAGE VERTICAL PRV STATION WITH LOW-FLOW BYPASS & “WATCHDOG” COMBINATION

Bypass Weight Each
2 x 1½ 361.2 KB67386DEV $60680.50
2½ x 1½ 388.2 KC03386DEV 63210.50
3 x 1½ 455.9 KC40386DEV 67633.00
2 491.0 KC43386DEV 68129.00

SECTION 3 – Hole Cut Products
Hole Cut
Products

Hole Cut Products
Styles 920/920N Female Threaded Mechanical-T Outlet
Mechanical-T Outlet STYLE 920 – FEMALE THREADED BRANCH
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Female Threaded Branch † Spare Parts
Refer to publication 11.02 Price Each Standard
Approx. Bolts & Nuts Grade “E”
inches Wgt. Ea. Size or “T”
Run x Brch. Number lb Painted Galv. inches Gaskets
2 x ½ 920N 3.1 $149.00 $186.00 ½ x 2¾ $33.50
¾ 920N 3.1 149.00 186.00 ½ x 2¾ 33.50
1 920N 3.0 149.00 186.00 ½ x 2¾ 33.50
1¼ 920N 3.5 171.50 211.00 ½ x 2¾ 39.00
1½ 920N 3.6 171.50 211.00 ½ x 2¾ 39.00
2½ x ½ 920N 3.0 149.00 186.00 ½ x 2¾ 33.50
¾ 920N 3.0 149.00 186.00 ½ x 2¾ 33.50
1 920N 2.9 149.00 186.00 ½ x 2¾ 33.50
Style 920 Female
1¼ 920N 3.5 208.00 252.00 ½ x 3¼ 39.00
1½ 920N 3.6 208.00 252.00 ½ x 3 39.00
3 x ½ 920N 3.4 171.50 208.00 ½ x 2¾ 33.50
¾ 920N 3.4 171.50 208.00 ½ x 2¾ 33.50
1 920N 3.3 171.50 208.00 ½ x 2¾ 33.50
1¼ § 920N 3.8 214.50 268.00 ½ x 2¾ 39.00
1½ § 920N 4.1 214.50 268.00 ½ x 2¾ 39.00
2§ 920N 4.9 247.00 306.00 ½ x 3¼ 39.00
4 x ½ 920N 3.7 213.50 255.00 ½ x 2¾ 33.50
¾ 920N 3.7 213.50 255.00 ½ x 2¾ 33.50
1 920N 3.6 213.50 255.00 ½ x 2¾ 33.50
1¼ 920N 4.0 249.50 295.50 ½ x 2¾ 39.00
1½ 920N 4.2 259.50 326.00 ½ x 2¾ 39.00
2 920N 5.0 259.50 329.00 ½ x 2¾ 39.00
2½ 920 5.8 270.50 349.50 1 x 2¾ 43.00
3 920 8.4 288.00 369.00 1 x 3¼ 47.00
5 x 1½ 920 7.7 316.00 400.50 ⅝ x 4¾ 39.00
2 920 8.2 316.00 400.50 ⅝ x 4¾ 39.00
2½ 920 8.3 333.00 424.50 ⅝ x 4¾ 43.00
3 920 8.4 355.00 455.00 ⅝ x 4¾ 47.00
6 x 1¼ 920N – – – ½ x 2¾ 39.00
1½ 920N 5.1 324.00 414.00 ½ x 2¾ 39.00
2 920N 5.6 324.00 414.00 ½ x 2¾ 39.00
2½ 920 7.6 349.00 450.50 ⅝ x 4¾ 43.00
3 920 8.4 370.50 475.00 ⅝ x 4¾ 47.00
4 920 10.1 411.00 532.50 ⅝ x 4¾ 62.00
8 x 2 920 11.6 564.50 710.00 ¾ x 4¼ 44.50
2½ 920 11.6 564.50 710.00 ¾ x 4¼ 44.50
3 920 12.6 594.50 753.00 ¾ x 4¼ 47.00
4 920 15.3 612.50 789.00 ¾ x 4¼ 62.00
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Section 17 –
Pipe Preparation Tools for more information.
† Some sizes of the Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets.
Contact Victaulic for details.
§ Requires ½ x 3¼” bolts when used in cross configuration.

Hole Cut Products
Style L920N Female Threaded Mechanical-T Outlet
Carbon Steel STYLE L920N – FEMALE THREADED BRANCH, TYPE 316 STAINLESS STEEL HARDWARE
Size MECHANICAL-T Outlet – Style L920N

Mechanical-T Outlet Price Each
inches Approx. Wgt. Ea.
STYLE L920N
2 x ½ 3.3 $500.50 $570.00
SA352 Grade LCC ¾ 3.1 516.50 572.00
Refer to publication 51.01 1 3.0 522.50 578.50
3 x ¾ 3.4 526.00 585.00
1 3.3 532.50 591.00
4 x ½ 3.7 532.50 593.00
¾ 3.7 534.00 595.00
1 3.7 541.00 601.00
6 x ¾ 5.1 624.50 695.50
1½ 5.7 643.50 719.50
2 6.5 643.50 719.50
8 x ¾ 11.6 989.50 1111.00
2 11.3 1028.50 1158.00
Style L920N – Female Threaded
10 x ¾ 16.5 1116.00 1262.50
1½ 15.2 1165.00 1289.50
12 x ¾ 19.4 1309.50 1484.50
1½ 20.5 1328.50 1510.00
14 x ¾ 24.2 1704.50 1930.50
1½ 24.2 1728.00 1955.00
16 x ¾ 26.6 1801.00 2042.50

Hole Cut Products
Styles 920/920N Grooved Mechanical-T Outlet
Mechanical-T Outlet STYLE 920 – GROOVED BRANCH
COMPLETE MECHANICAL-T
STYLES 920/920N Size Style Grooved Branch Spare Parts
Refer to publication 11.02 Price Each Standard
Approx. Bolts & Nuts Grade “E”
inches Wgt. Ea. Size or “T”
Run x Branch Number lb Painted Galv. inches Gaskets
2 x 1 920N – – – – $33.50
1¼ 920N 3.2 $171.50 $211.00 ½ x 2¾ 39.00
1½ 920N 3.2 171.50 211.00 ½ x 2¾ 39.00
2½ x 1 920N – – – – 33.50
1¼ 920N 3.2 208.00 252.00 ½ x 3¼ 39.00
1½ 920N 3.3 208.00 252.00 ½ x 3 39.00
3 x 1 920N – – – – 33.50
1¼ § 920N 3.7 214.50 268.00 ½ x 2¾ 39.00
1½ § 920N 3.8 214.50 268.00 ½ x 2¾ 39.00
Style 920 Grooved 2§ 920N 4.6 247.00 306.00 ½ x 3¼ 39.00
3½ x 2 920N 3.8 949.00 1184.50 ½ x 2¾ 39.00
4 x 1 920N 1.6 – – – 33.50
1¼ 920N 3.6 249.50 295.50 ½ x 2¾ 39.00
1½ 920N 3.9 259.50 326.00 ½ x 2¾ 39.00
2 920N 4.6 259.50 329.00 ½ x 2¾ 39.00
2½ 920 5.0 270.50 349.50 ½ x 2¾ 43.00
3 920 6.4 288.00 369.00 ½ x 3¼ 47.00
5 x 1½ 920 7.6 316.00 400.50 ⅝ x 4¾ 39.00
2 920 8.0 316.00 400.50 ⅝ x 4¾ 39.00
2½ 920 7.9 333.00 424.50 ⅝ x 4¾ 43.00
3 920 8.8 355.00 455.00 ⅝ x 4¾ 47.00
6 x 1¼ 920N 4.8 324.00 414.00 ½ x 2¾ 39.00
1½ 920N 5.1 324.00 414.00 ½ x 2¾ 39.00
2 920N 5.6 324.00 414.00 ½ x 2¾ 39.00
2½ 920 7.6 355.00 450.50 ⅝ x 4¾ 43.00
3 920 8.4 370.50 475.00 ⅝ x 4¾ 47.00
4 920 10.1 411.00 532.50 ⅝ x 4¾ 62.00
8 x 2 920 11.6 564.50 710.00 ¾ x 4¼ 44.50
2½ 920 11.6 564.50 710.00 ¾ x 4¼ 44.50
3 920 11.6 594.50 753.00 ¾ x 4¼ 47.00
4 920 12.5 612.50 789.00 ¾ x 4¼ 62.00
Victaulic Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Section 17 –
Pipe Preparation Tools for more information.

Hole Cut Products
Styles 920/920N Mechanical-T Cross
Mechanical-T Cross The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T
Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T
STYLE 920/920N *
outlets are available with either grooved or female threaded outlets. Your choice must be specified on
each order.
STYLES 920/920N – MECHANICAL-T CROSS
Nominal Size COMPLETE MECHANICAL-T Cross

inches Style with “E” or “T” Gasket †
Run x Branch
A B Number Painted Galv.
2 x 2 x ½ x ½ 920N $232.00 $296.50
½ x ¾ 920N 265.00 338.00
½ x 1 920N 232.00 296.50
½ x 1¼ 920N 265.00 338.00
½ x 1½ 920N 265.00 338.00
¾ x ¾ 920N 232.00 338.00
¾ x 1 920N 232.00 296.50
¾ x 1¼ 920N 265.00 338.00
¾ x 1½ 920N 265.00 338.00
1 x 1 920N 232.00 296.50
1 x 1¼ 920N 265.00 338.00
1 x 1½ 920N 265.00 338.00
1¼ x 1¼ 920N 265.00 338.00
1½ x 1¼ 920N 265.00 338.00
1½ x 1½ 920N 265.00 338.00
2½ x 2½ x ½ x ½ 920N 232.00 296.50
½ x ¾ 920N 232.00 296.50
½ x 1 920N 232.00 296.50
½ x 1¼ 920N 317.50 410.00
½ x 1½ 920N 317.50 435.50
¾ x ¾ 920N 232.00 296.50
¾ x 1 920N 232.00 296.50
¾ x 1¼ 920N 317.50 410.00
¾ x 1½ 920N 317.50 435.50
1 x 1 920N 232.00 296.50
1 x 1¼ 920N 317.50 410.00
1 x 1½ 920N 317.50 410.00
1¼ x 1 920N 317.50 +
1¼ x 1¼ 920N 317.50 410.00
1½ x 1 920N 317.50 +
1½ x 1¼ 920N 317.50 410.00
1½ x 1½ 920N 317.50 338.00
3 x 3 x ½ x ½ 920N 259.50 333.00
½ x ¾ 920N 259.50 333.00
½ x 1 920N 317.50 395.00
½ x 1¼ § 920N 317.50 395.00
½ x 1½ § 920N 317.50 395.00
½ x 2§ 920N 366.50 452.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections. Refer to publication 11.03, or contact
Victaulic for details.
‡ Available grooved only.

Hole Cut Products
Nominal Size COMPLETE MECHANICAL-T Cross

inches Style with “E” or “T” Gasket †
Run x Branch
3 x 3 x ¾ x ¾ 920N $259.50 $333.00
¾ x 1 920N 317.50 395.00
¾ x 1¼ 920N 317.50 395.00
¾ x 1½ 920N 317.50 395.00
¾ x 2 920N 366.50 452.50
1 x 1 920N 259.50 333.00
1 x 1¼ 920N 317.50 395.00
1 x 1½ 920N 317.50 395.00
1 x 2 920N 366.50 452.50
1¼ x 1¼ § 920N 317.50 395.00
1½ x 1¼ § 920N 317.50 395.00
1½ x 1½ § 920N 317.50 395.00
2 x 1¼ § 920N 366.50 412.50
2 x 1½ 920N 366.50 452.50
2 x 2§ 920N 366.50 452.50
4 x 4 x ½ x ½ 920N 317.50 411.50
½ x ¾ 920N 317.50 411.50
½ x 1 920N 317.50 411.50
½ x 1¼ 920N 384.00 481.50
½ x 1½ 920N 384.00 481.50
½ x 2 920N 411.50 484.00
¾ x ¾ 920N 317.50 411.50
¾ x 1 920N 317.50 411.50
¾ x 1¼ 920N 384.00 481.50
¾ x 1½ 920N 384.00 481.50
¾ x 2 920N 411.50 484.00
1 x 1 920N 317.50 411.50
1 x 1¼ 920N 384.00 484.00
1 x 1½ 920N 411.50 481.50
1 x 2 920N 411.50 484.00
1¼ x 1¼ 920N 384.00 481.50
1½ x 1¼ 920N 384.00 481.50
1½ x 1½ 920N 384.00 481.50
2 x 1¼ 920N 411.50 484.00
2 x 1½ 920N 411.50 484.00
2 x 2 920N 411.50 484.00
2½ x 2½ 920 411.50 521.50
3 x 2½ 920 428.00 553.00
3 x 3 920 428.00 553.00

Hole Cut Products
Nominal Size COMPLETE MECHANICAL-T Cross with

inches Style “E” or “T” Gasket †
Run x Branch
5 x 5 x 1½ x 1½ 920 $470.00 $594.50
2 x 1½ 920 494.00 594.50
2 x 2 920 470.00 594.50
2½ x 1½ 920 494.00 628.50
2½ x 2 920 494.00 628.50
2½ x 2½ 920 494.00 628.50
3 x 1½ 920 529.00 676.00
3 x 2 920 529.00 676.00
3 x 2½ 920 529.00 676.00
3 x 3 920 529.00 676.00
6 x 6 x 1¼ ‡ x 1¼ ‡ 920N 481.00 617.00
1½ x 1¼ ‡ 920N 481.00 617.00
1½ x 1½ 920N 481.00 617.00
2 x 1½ 920N 481.00 617.00
2 x 2 920N 500.50 665.00
2½ x 2½ 920 515.50 665.00
3 x 2½ 920 550.00 705.00
3 x 3 920 550.00 705.00
4 x 2½ 920 608.50 789.00
4 x 3 920 608.50 789.00
4 x 4 920 608.50 789.00
8 x 8 x 2 x 2 920 841.00 1059.50
2½ x 2 920 841.00 1059.50
2½ x 2½ 920 841.00 1059.50
3 x 2½ 920 884.00 1124.50
3 x 3 920 884.00 1124.50
4 x 2½ 920 915.00 1182.00
4 x 3 920 915.00 1182.00
4 x 4 920 915.00 1182.00

Hole Cut Products
Style 923 Strapless Outlet
Strapless Outlet STRAPLESS OUTLET – WITH GRADE “E” GASKET
COMPLETE STRAPLESS OUTLET

STYLE 923 With “E” or “T” Gasket
Refer to publication 11.05 Nominal Size NPT IPS Outlet
Approx. Wgt. Per Unit Price
inches lb Per Unit
4–8x½ 1.9 $366.50
4–8x¾ 1.6 391.00
10 and larger x ½ 1.9 366.50
10 and larger x ¾ 1.6 391.00
4 – 8”
10” and larger
Style 924 Strapless Thermometer Outlet
Strapless STRAPLESS THERMOMETER OUTLET – WITH GRADE “E” GASKET
COMPLETE THERMOMETER OUTLET *

Thermometer Outlet Nominal Size With “E” Gasket
Approx. Wgt.
STYLE 924 Per Unit Price
Refer to publication 11.06 inches lb Per Unit
4 – 8 for 6 Stem # 2.4 $548.00
10 and larger for 6 Stem # 2.3 548.00
* Available with Grade “T” Gasket. Contact Victaulic for details.
# Style 924 strapless thermometer outlet is internally threaded to ¾” female NPT or 1¼ – 18 UNEF female.
4 – 8”
10” and larger

Hole Cut Products
Mechanical-T Spigot For information on Style 926 Mechanical-T Spigot, see Section 10 – HDPE Products
STYLE 926
For use with HDPE, steel, or

ductile iron pipe.
Vic-Tap II Hot Tap
Vic-Tap II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into
systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2⅜” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2½” full port ball valve factory mounted. Available in sizes 4 x 2½”, 5 x 2½”,
6 x 2½”, and 8 x 2½”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Refer to Section 17 – Pipe Preparation Tools for prices and where to call for purchase information.

SECTION 4 – Valves and Specialties
Valves
and Specialties

Grooved IPS Pipe Valves
Series 761 Vic-300 MasterSeal™ Butterfly Valve
Grooved IPS Valves

Vic-300 MasterSeal™
Butterfly Valve
SERIES 761
Gear Operator 10-Position Handle with

Memory Stop
Ordering Information
Product, body material and disc/stem are standard as listed below. Please specify size, seat, and operator when ordering. Please see the next
page for numbering chart information.
For power actuation, contact Victaulic for your nearest authorized valve actuation center.
Refer to publication 08.20.
2” 2½” 3” 4” 5” 6” 8” 10” 12”
Size (020) (024) (030) (040) (050) (060) (080) (100) (120)
Bare Valve (Ductile Iron Electroless Nickel
$969.50 $1262.50 $1333.00 $1652.00 $3186.00 $3335.00 $4440.00 $6276.00 $7116.50
Coated Disc)
PRICE OF VALVE COMPLETE WITH OPERATOR
DUCTILE IRON 10-POSITION OPERATOR
“E” or “T” Seat 10-Position Handle with
$1280.50 $1577.00 $1645.00 $1963.00 $3496.00 $3691.50 $4799.00 $7877.00 $8715.50
Memory Stop
10-Position Handle with Memory Stop “O” 1827.00 2117.00 2349.00 2619.50 5023.00 5145.50 6611.00 + +
10-Position - Tamper Proof with “E” or “T” Seat 1474.00 1769.50 1837.00 2159.00 3690.00 3885.00 4990.50 – –
STAINLESS STEEL TRIM 10-POSITION OPERATOR
$2218.50 $2316.00 $2497.50 $2997.50 $6035.00 $6451.50 $9555.00 $15957.00 $18315.50
Memory Stop
10-Position Handle with Memory Stop “O” 2721.50 3095.50 4050.00 4529.50 8471.50 9068.00 10668.00 + +
10-Position - Tamper Proof with “E” or “T” Seat 2651.50 2793.50 2851.00 3038.50 5507.00 5978.00 9907.50 – –
ALUMINUM BRONZE TRIM 10-POSITION OPERATOR
$1857.00 $2146.50 $2667.00 $2793.50 $5090.00 $6024.50 – – –
Memory Stop
10-Position Handle with Memory Stop “O” + + + + + + – – –
10-Position - Tamper Proof with “E” or “T” Seat + + + + + + – – –


2” 2½” 3” 4” 5” 6” 8” 10” 12”

Size (020) (024) (030) (040) (050) (060) (080) (100) (120)
ALUMINUM GEAR OPERATOR WITH DUCTILE IRON DISC
Gear Operator with “E” or “T” Seat $2336.50 $2630.00 $2699.00 $3020.00 $4701.50 $4550.50 $5810.50 $7702.50 $8540.50
Gear Operator with “O” Seat 2471.50 2754.50 2878.50 3259.50 5958.50 4858.50 7890.00 10266.00 11457.00
Gear Operator with Memory Stop “E” or “T” 2618.50 2913.50 2980.00 3301.50 5054.00 4831.50 6159.50 8200.00 9035.50
Gear Operator with Chain Wheel “E” or “T” 3374.50 3668.00 3737.00 4057.00 5737.50 5588.50 6844.00 8661.00 9501.00
Gear Operator with Memory Stop & Chain
3653.50 3951.00 4017.00 4335.50 5870.00 6088.00 7196.00 9158.50 9996.50
Wheel “E” or “T”
Gear Operator with AWWA 2” Square Operator
+ + + + + + + + +
Nut
ALUMINUM GEAR OPERATOR WITH STAINLESS STEEL TRIM
Gear Operator with “E” or “T” Seat $3147.50 $3561.50 $3570.00 $4194.00 $6818.50 $7392.50 $10252.00 $15130.00 $17118.50
Gear Operator with “O” Seat 3601.00 3961.50 4140.50 4500.00 7032.50 9327.50 12372.50 15670.00 18015.00
ALUMINUM GEAR OPERATOR WITH ALUMINUM BRONZE TRIM
Gear Operator with “E” or “T” Seat + + + + + + – – –
Gear Operator with “O” Seat + + + + + + – – –
KITS (Kit prices do not include valve)
Spare Handwheel $98.50 $98.50 $98.50 $98.50 $192.50 NR $192.50 NR $192.50 NR $194.50 $194.50
Memory Stop (for Gear Operator) 298.50 NR 298.50 NR 298.50 NR 298.50 NR 369.00 NR 369.00 NR 369.00 NR 561.50 NR 561.50 NR
CONVERSION KITS (Conversion Kit prices do not include valve)
Gear Operator $1720.50 $1720.50 $1720.50 $1720.50 $1720.50 $1720.50 $1720.50 $1936.50 $1936.50
10-Position Handle with Memory Stop 401.00 401.00 401.00 455.50 455.50 455.50 455.50 2212.50 2212.50
10-Position – Tamper Proof 637.50 637.50 637.50 692.00 692.00 692.00 692.00 – –

NR
Non-returnable
V - 040 - 761 S E -0
Actual OD Size
Type in/mm Code Series Disc/Stem Seat Operator
V 2.375/60.3 020 761 S - Ductile Iron/416SS E - EPDM 0 - Bare
2.875/73.0 024 B - Aluminum Bronze/416SS T - Lubricated Nitrile 2 - 10-Position handle with memory stop
3.000/76.1 761 V - Thermal Barrier O - Fluoroelastomer 3 - Gear operator
3.500/88.9 030 X - CF8M/416SS 4 - Lever lock with tamper resistant
4.250/108.0 108 9 - Special 5 device (8"/200 mm)
4.500/114.3 040 5 - Gear operator with memory stop
5.250/133.0 133 6 - Gear operator with chain wheel
5.500/139.7 139 7 - Gear operator with memory stop and
5.563/141.3 050 chain wheel
6.250/159.0 159 8 - Gear operator with AWWA 2" square
6.500/165.1 165 oper. nut
6.625/168.3 060 S - Bare with ISO 5211 diagonal square
head drive
8.500/216.3 216
9 - Special 5
8.625/219.1 080
10.500/267.4 267
10.750/273.0 100
12.500/318.5 318
12.750/323.9 120
5
Details required with order.

Series W761 Vic-300 (14 – 24”) 300 psi AGS Butterfly Valve
AGS Vic-300 AGS SERIES VIC-300 BUTTERFLY VALVE
AGS Series
300 psi Butterfly Vic-300
Valve AGS Series Vic-300
Bare Valve ‡
AGS Series Vic-300
With Gear Operator ‡
With Gear
Operator ‡
Size With “E” or “T” With “E” or “T” With “O”
SERIES W761
Approx. Approx.
Refer to publication 20.06 Weight Weight
Actual Size Each Price Each Each Price Each Price Each
inches Code lb 1182-00 lb 1182-20 1132-20
14 140 125.0 $8492.50 197.5 $9985.00 $11378.00
16 160 153.0 11908.50 265.0 13659.00 16208.50
18 180 199.0 14890.50 257.0 16809.50 20948.00
20 200 285.0 20459.00 477.0 22745.50 28344.00
24 240 451.0 26437.50 700.0 28964.50 38324.50
Size Gear Operator Options †

Series Vic-300 With Series Vic-300 With
Gear Oper. ‡ and Gear Oper. ‡ and
Actual Size Memory Stop † with “E” Chainwheel with “E”
inches Code or “T” or “T”
14 140 $11485.00 $14605.50
16 160 15158.00 18279.00
18 180 18308.50 21429.50
20 200 24245.00 27366.50
24 240 30464.00 33584.00

Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability
‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.
† Must be ordered at time of purchase. This option is not designed for field installation.
Galvanized chain @ $28.50 per foot.
Series W719 AGS Butterfly Valve
AGS Butterfly SERIES W719 AGS BUTTERFLY VALVE
Approx.
Valve Weight
Size Each Gear Operator with Handwheel
SERIES W719 Actual
Refer to publication 23.19 inches lb Price Each
14 357.1 $9985.00
16 414.5 13659.00
18 507.1 16809.50
20 621.7 22745.50
24 1003.1 28964.50
26 1179.5 +
28 1309.5 +
30 1534.4 +
32 1710.8 +
36 2257.5 +
40 4189.0 +
42 4899.0 +
48 5908.0 +
54 9076.0 +
60 11184.0 +

Series 706 (14 – 24”) 300 psi Butterfly Valve
300-psi SERIES 706 300-PSI BUTTERFLY VALVE
Series 706
Butterfly Valve Series 706 With Gear Series 706
Approx. Bare Valve ‡ Series 706 Approx. Operator ‡ With Gear
SERIES 706 Weight With “E” or Bare Valve ‡ Weight With “E” or Operator ‡
Refer to publication 08.17 Size Each “T” With “O” Each “T” With “O”
Actual Size
inches Code lb 3182-00 3132-00 lb 3182-20 3132-20
14 140 125.0 $22245.50 $26831.50 152.0 $23459.00 $27594.50
16 160 153.0 29882.00 37118.00 187.0 39000.50 42498.50
18 180 199.0 36002.50 41791.00 257.0 41719.00 46995.50
20 200 285.0 45373.00 54679.50 355.0 51377.00 60189.00
24 240 451.0 65187.00 74052.00 522.0 68760.00 79335.50
Size Gear Operator Options ‡

Actual Size
inches Code Memory Stop † Chain Wheel
14 140 + $7107.50 NR
16 160 + 7107.50 NR
18 180 + 7107.50 NR
20 200 + 7107.50 NR
24 240 + 7107.50 NR
Memory Stop and Chainwheel available. Contact Victaulic for pricing and availability
‡ 2” nut, in lieu of handwheel, available at no additional charge. Specify clearly on order.
† Must be ordered at time of purchase. This option is not designed for field installation.
Galvanized chain @ $28.50 per foot.
Important: Series 706 valves must not be used with AGS products. Series W761 Vic-300 AGS butterfly valves and Series W709
butterfly valves must be used on Advanced Groove System (AGS) piping systems.
NR
Non-returnable
V - 180 - 1 5 8 2 - 20
Act. Size Pressure Closure Coupling

Type In./mm Code Rating Body Gasket Grade Bracket Accessories*
V 14/350 140 3 - 300 psi (3) 5 - PPS Coated 3 - Iron disc w/fluoro- 0 - No Bracket 00 - Bare
16/400 160 Iron elastomer Seat/ 2 - Standard 20 - Gear operator
18/450 180 Stainless Steel 21 - Gear operator with memory stop
20/500 200 9 - Special* stems - "O" 9 - Special* 22 - Gear operator with chain wheel
24/600 240 7 - Iron disc w/Nitrile 23 - Gear operator with AWWA square
Seat/Stainless Steel operating nut
stems - “T"
24 - Gear operator with memory stop
8 - Iron disc w/EPDM and chain wheel
Seat/Stainless Steel 29 - Non-std. gear operator*
stems - "E"
9 - Special*
9 - Special*
*Details required

Series 700 Butterfly Valve
Butterfly Valve SERIES 700 – 200 PSI
Nominal Size Valve with Two Position Padlockable Handle

SERIES 700 Approx. Wgt.
Refer to publication 08.05 Each Standard Trim Stainless Steel Trim
inches lb Price Each Price Each
1½ 2.8 $1122.50 $1424.00
2 3.3 1122.50 1424.00
2½ 6.4 1427.00 1727.50
3 6.8 1610.50 1909.50
4 12.1 1769.50 2073.50
5 26.1 3371.00 –
6 32.5 3566.00 3867.50
Series 700 valves furnished with rubber lined painted steel body, painted ductile housing and aluminum-bronze disc. Grade “T”
Nitrile and Grade “E” EPDM liners are available. Refer to Valve Figure Number Chart below.
V - 020 - 2 A A A - 1O
Nom. Size Pressure

Type In./mm Code Rating Seat/Liner Disc & Trim Body Style Operator
V 1½/40 014 2 - 200 psi A - Grade “E” (EPDM) A - Al-Bronze A - Standard 10 - Two Position Lever
2/50 020 rubber-lined steel B - Stainless steel Handle
2½/65 024 B - Grade “T” (Nitrile) C - Chrome plated
3/80 030 rubber-lined steel Al-Bronze
4/100 040
5/125 050 9 - Special*
6/150 060
NOTE: * Details required
Series 721 Grooved End Ball Valve
Grooved End Ball SERIES 721 GROOVED END BALL VALVE
Approx. Valve Complete

Valve Nominal Size Weight Each With 2-Position Handle
SERIES 721 4 32.4 $4060.00
Refer to publication 08.14 6 75.0 12445.50

Series 726 Grooved End Ball Valve
Grooved End Ball SERIES 726 – CARBON STEEL OR STAINLESS STEEL TRIM
Valve Complete
Valve Approx. With Handle & Valve
Nominal Size Weight Each Tamper Resistant Complete With
SERIES 726 inches lb Lock/Seal Option Gear Operator
Refer to publication 08.23 WITH CARBON STEEL CHROME PLATED TRIM
1000 psi
1½ 4.4 $561.00 $1485.50
2 6.5 622.00 2081.00
2½ 10.4 1353.00 2733.00
3 14.9 2183.50 3869.00
800 psi
4 41.5 $3376.50 $4928.50
1½ – 3” 6 78.5 10353.00 11621.50
WITH STAINLESS STEEL TRIM
1000 psi
1½ 4.8 $592.00 $1523.00
2 7.5 956.50 3062.50
2½ 11.6 2415.00 3859.00
3 17.2 3106.00 4924.00
800 psi
4 45.0 $4226.50 $5982.50
6 82.0 11377.00 13611.00
4 – 6”
Series 726 valves are available with electric, pneumatic, and hydraulic actuators or chain wheels. Contact Victaulic for details.
When ordered separately, handles and locking device kits are non-cancellable and non-returnable.
B - 020 - 1 1 6 6 - 16
Actual OD Size Pressure

Type in/mm Code Rating Body Ball & Stem Seat Operator
B 1900/48.3 014 1 - 1,000 psi 1 - Iron2 2 - 316 Stainless Steel 6 - Reinforced PTFE 00 - Bare
2.375/60.3 020 8 - 800 psi3 6 - Chrome Plated 16 - 2-Position Handle with Tamper-
2.875/73.0 024 9 - Special1 Carbon Steel 9 - Special1 proof Locking Device
3.000/76.1 761 19 - Locking Device - Without Handle
3.500/88.9 030 9 - Special1 20 - Gear Operator
4.500/114.3 040 21 - Gear Operator with Memory
6.625/168.3 060 22 - Gear Operator with Chain Wheel
6.500/165.1 165 23 - Gear Operator with AWWA
Square Nut
29 - Non-standard Gear Operator1
NOTES:
(1) Details required.
(2) All Iron Body valves are NACE compliant.
(3) Pressure rating applicable to 4 and 6" sizes only.

Series 727 1500 psi Ball Valve
NACE Compliant SERIES 727 – BARE VALVE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Approx. Wgt.
Ball Valve Nominal Size Each Price Each
1500 psi Bare Valve with Bare Valve with
Bare Valve with Carbon Steel Bare Valve with Stainless Steel
SERIES 727 Carbon Steel Trim and Freeze Stainless Steel Trim and Freeze
inches lb Trim Port Option Trim Port Option
Grooved x Grooved
2 7.2 $196.50 $230.50 $288.00 $338.50
3 16.8 443.00 518.50 579.00 678.50
4 36.3 822.00 963.50 869.50 1018.50
6 86.5 2466.00 – 2668.00 –
Grooved x Threaded
3 17.6 $549.00 $624.50 $685.00 $784.50
4 37.4 967.50 1109.00 1015.00 1164.00
SERIES 727 – LEVER HANDLE WITH CARBON STEEL OR STAINLESS STEEL TRIM
Bare Valve
Approx. Wgt.
Nominal Size Each Price Each
Lever Handle Lever Handle
with Carbon with Stainless
Lever Handle Steel Trim and Lever Handle Steel Trim and
with Carbon Freeze Port with Stainless Freeze Port
inches lb Steel Trim Option Steel Trim Option
Grooved x Grooved
2 8.4 $216.00 $250.50 $308.00 $358.50
3 18.0 466.50 542.00 602.50 701.50
4 37.5 845.50 987.00 893.00 1042.00
With Lever Handle
6 87.7 2512.50 – 2714.50 –
Grooved x Threaded
3 18.8 $572.00 $572.00 $707.50 $807.50
4 38.5 990.50 990.50 1038.00 1187.00

When ordered separately, handles and locking device kits are non-cancellable and non-returnable.
Series 722 Threaded Brass Ball Valve
Ball Valve SERIES 722 – BALL VALVE
Approx. Wgt.
SERIES 722 Nominal Size Each
(Threaded) ¼ 0.2 $92.00
600 psi (WOG) ½ 0.4 119.50
Refer to publication 08.15 ¾ 0.7 120.50
1 1.0 159.50
1¼ 1.5 252.00
1½ 2.1 311.00
2 2.4 412.50
UL Listed, FM Approved in ½” and larger sizes.

Series 722L – Low Lead Ball Valve
Series 722L SERIES 722L – LOW LEAD BALL VALVE
Approx.
LOW LEAD BALL VALVE Nominal Size Weight Each Victaulic
inches lb Part Code List Price
¼ 0.2 V002722L00 $109.00
⅜ 0.3 V003722L00 109.00
½ 0.4 V004722L00 151.00
¾ 0.7 V006722L00 151.00
1 1.0 V010722L00 198.50
1¼ 1.5 V012722L00 317.50
1½ 2.1 V014722L00 391.50
2 2.4 V020722L00 518.00
Optional Handle Extensions for Series 722 and Series 722L
Handle Extension OPTIONAL HANDLE EXTENSIONS FOR SERIES 722 AND SERIES 722L
Valve Inlet Size 2” Handle Extension

FOR SERIES 722 AND SERIES inches Victaulic Part Code Price Each
722L ⅜–½ P0047222XT $31.50 NR
Refer to publication 08.15 ¾ – 1¼ P0067222XT 31.50
1½ – 2 P0147222XT 31.50
NR
Non-returnable
Series 713 High Pressure Check Valve
High Pressure Check SERIES 713 – GRADE “E” OR “T” WITH DUCTILE IRON BODY
Approx.
Valve Nominal Size Weight Each Grade “E” or “T”
SERIES 713 2 11.6 $534.50
2½ 18.0 879.50
2” – 1000 psi; 2½ – 4” – 750 psi
3 22.5 968.50
4 38.0 1453.00
NOTE: Contact Victaulic for specialty coatings.

Series 716H/716 Vic-Check Valve
Vic-Check SERIES 716H/716 – VIC-CHECK CHECK VALVE
Approx.
Check Valve Nominal Size Weight Each Grade “E” or “T” Grade “O”
SERIES 716H/716 2 10.7 $1146.00 $1621.50
Refer to publication 08.08 2½ 3.6 1195.00 1669.00
3 4.5 1409.00 1777.50
4 20.0 1489.00 2497.50
5 27.0 2472.50 3579.50
6 38.0 2929.50 4057.00
8 64.0 4001.00 4786.50
10 100.0 10703.00 14076.50
12 140.0 12680.00 16904.00
2 – 3” Series 716H NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
For Series 716 sizes 4 –12” only – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery.
Valves come standard untapped – optional two ½” NPT drain holes. One hole on each side of seat also available as an option.
4 – 12” Series 716

Series 779 Venturi Check Valve
Venturi Check Valve SERIES 779 – VENTURI CHECK VALVE
Approx. Flow Measuring

SERIES 779 Nominal Size Weight Each Valve* Complete Kit ONLY
4 16.0 $2207.50 $827.50
5 20.0 3189.00 827.50
6 28.0 3648.00 827.50
8 40.0 4720.50 827.50
10 100.0 11364.50 827.50
12 140.0 13344.50 827.50
* Valve complete includes Venturi Check valve, drilled, tapped and plugged with Flow Measuring Kit enclosed (field assembly
required). Flow Measuring Kit includes extension nipples, bronze access valves, quick disconnect for meter connection and flow
chart tag to affix to the valve.
NOTE: Valve comes with two ⅛” NPT drain holes and plug, one hole on each side of valve.
Series 716H/716 and Series 779 Check Valve Configurator
V - 040 - 1 4 1 0 - 02
Act. Size Body

Type In./mm Code Material Disc Seat Agency Accessories
V 2½/657 024 1 - D.I. 1 - All-Bronze with EPDM1 1 - Nickel 5 0 - None 00 - None
76.1 mm7 076 3 - Coated 2 - All-Bronze with Nitrile1 2 - PPS coated D.I.1 02 - Flow Measuring Kit (Series 779)3, 4
3/807 030 D.I.* 3 - All-Bronze with Viton1 05 - ½" Taps with Plugs for Drains3, 6
4/100 040 4 - D.I. with EPDM Encapsulation3 06 - 2" Drain Tap with ¼" Taps on
5/125 050 9 - Special* 5 - D.I. with Nitrile Encapsulation3 Bottom of Valve4
139.7 mm 139 6 - D.I. with Fluoroelastomer 07 - 2" Drain Tap with ½" Taps on
6/150 060 Encapsulation3 Bottom of Valve3, 6
165.1 mm 165 25 - Flow Measuring Kit with Drains
8/200 080 9 - Special*
10/250 100
12/300 120
NOTES:
* Details must be provided with order
1 - 2½"/65 mm, 76.1 mm and 3"/80 mm sizes only
3 - Sizes 4 - 12"/100 - 300 mm only
4 - This code is for Series 779 valves only (Example: C-060-1410-02)
5 - Sizes 4"/100 mm and larger are always nickel
6 - Includes two ½" taps on bottom of valve – one each upstream and downstream of disc
7 - 2½"/65 mm, 76.1 mm and 3"/80 mm sizes are not available in Series 779 configurations
Series W715 AGS Vic-Check Valve
Double Disc AGS SERIES W715 – VIC-CHECK CHECK VALVE
Approx.
Vic-Check Valve Nominal Size Weight Each Grade “E”
AGS SERIES W715 14 140.0 $9982.50
18 180.0 17958.50
20 200.0 23606.50
24 240.0 29762.50

Series 377 Balancing Plug Valve
Balancing Plug Valve SERIES 377 – BALANCING PLUG VALVE
With Lever
SERIES 377 Nominal Size Operator With Gear Operator
Approx. Approx.
(AWWA Dimensions) Use with Wgt. Each Wgt. Each
Style 307 Transition coupling inches lb Price Each lb Price Each
for IPS pipe. 3 47.0 $2444.50 39.0 $4631.00
6 89.0 4609.50 90.0 6473.00
8 (100 – 175 psi) – – 140.0 8767.50
10 – – 218.0 12555.50
12 – – 308.0 19148.50
Available standard with EPDM (Grade “E”) or Nitrile (Grade “T”). Specify choice on order. Coated plug, welded nickel seat and
lever or gear operator complete with memory stop.
P - 080 - 2 1 1 1 - 81
Nom. Size Pressure

Type In./mm Code Rating Body Material Plug Coating Seat Operator
P 3/80 030 2 - 175 psi 1 - Iron 1 - Nitrile - “T” 1 - Nickel 00 - Bare
4/100 040 2 - EPDM - “E” 11 - Std. Handle with memory stop (3)
6/150 060 9 - Special (1) 9 - Special (1) 3- Fluoroelastomer - “O” 9 - Special (1) 81 - Gear operator with memory stop
8/200 080 82 - Gear operator with memory stop
10/250 100 9 - Special (1) and chainwheel
12/300 120 89 - Special gear operator (2)
(1) Details must be supplied with order.
(2) Details of operator must be supplied with order.
(3) 3, 4, and 6"/80, 100 and 150 mm only.
Series 318 Sump Ejector Kit
Sump Ejector Kit Size Wgt.

inches Assembled Price Each
SERIES 318 3 91.4 $5851.50
6 221.4 +
SERIES 318 - SUMP EJECTOR KIT * CONSISTS OF THE FOLLOWING COMPONENTS:
Quantity Component
1 Series 365 Plug Valve
1 Series 317 AWWA Check Valve †
2 Style 307 Transition Coupling
1 Style 31 AWWA Coupling
* Kits are supplied unassembled.
† Arm and Spring Kit standard.

Series 725T Diverter Valve
Diverter Valve SERIES 725T – DIVERTER VALVE
4” | 114.3 mm 6” | 168.3 mm 8” | 219.1 mm

SERIES 725T Size (040) (060) (080)
Refer to publication 08.41 Gear Operator $77559.00 $105316.50 $136974.50
Pneumatic Actuator
No Control Cabinet1 $97808.00 $125565.50 $157224.00
With Accessories but No Control Cabinet2 108963.00 136720.50 168379.00
With Accessories and Control Cabinet3 120118.00 147874.50 179534.00
Electric (AC) Actuator
Separate Control Unit4 $106183.50 $133940.00 $165599.50
Integral Mounted Control Unit5 101132.50 128888.50 160548.00
No Control Unit6 94818.50 122575.00 154233.50
Electric (48V DC)
No Control Unit6 151326.00 179082.00 210742.00
Pneumatic Actuator Notes:
1. Actuator supplied with: Pneumatic motor, Limit Switches – All valve input controls to be supplied by customer.
2. Actuator supplied with: Pneumatic motor, Limit Switches, Solenoid Valves, Air Filters and Lubricator, Sound Muffler and Air
Hoses – All valve input controls to be supplied by customer.
Hoses PLUS Control Cabinet that provides Input controls and Feedback.
Electric Actuator Notes:
4. Actuator supplied with: Electric motor, and Input/Feedback Control Unit connected via cable to the Electric motor. This
allows the Control Unit to be wall mounted at an accessible level for local operation.
5. Actuator supplied with: Electric motor, and Input/Feedback Control Unit mounted directly to the Electric motor. This allows
for local operation at the installed valve level.
6. Actuator supplied with: Electric motor only – All input/feedback controls to be supplied by customer.
Series 725S Diverter Valve
Diverter Valve SERIES 725S – DIVERTER VALVE
4” | 114.3 mm 6” | 168.3 mm 8” | 219.1 mm

SERIES 725S Size (040) (060) (080)
Refer to publication 08.41 Gear Operator $67929.50 $98350.00 $123862.00
Pneumatic Actuator
No Control Cabinet1 $87214.50 $117634.50 $143146.50
With Accessories but No Control Cabinet2 96491.00 126912.00 152423.00
With Accessories and Control Cabinet3 105768.50 136188.50 161700.50
Electric (AC) Actuator
No Control Unit6 82109.00 112529.00 138041.00
Electric (48V DC)
No Control Unit6 135925.00 166345.50 191858.00
Pneumatic Actuator Notes:
1. Actuator supplied with: Pneumatic motor, Limit Switches – All valve input controls to be supplied by customer.
Hoses – All valve input controls to be supplied by customer.
Hoses PLUS Control Cabinet that provides Input controls and Feedback.
Electric Actuator Notes:
4. Actuator supplied with: Electric motor, and Input/Feedback Control Unit connected via cable to the Electric motor. This
allows the Control Unit to be wall mounted at an accessible level for local operation.
5. Actuator supplied with: Electric motor, and Input/Feedback Control Unit mounted directly to the Electric motor. This allows
for local operation at the installed valve level.
6. Actuator supplied with: Electric motor only – All input/feedback controls to be supplied by customer.

Series 771M OS&Y Gate Valve
OS&Y Approx. Series 771M OS&Y Approx. Series 771M OS&Y

Gate Valve Size Weight Each Groove x Groove Weight Each Groove x Flange
Groove x Groove inches lb Price Each lb Price Each
Gate Valve 2½ 30.4 $1627.00 35.9 $1627.00
3 42.5 1940.00 43.5 2115.00
SERIES 771M 4 49.6 2283.00 63.5 2488.50
8 153.4 4790.00 181.5 5221.50
10 233.0 6015.00 272.0 7027.50
12 331.3 10054.50 401.0 10959.50
Groove x Groove
Groove x Flange
Series 371 OS&Y Gate Valve
OS&Y Approx. Series 371 OS&Y

Gate Valve Size Weight Each Groove x Groove
Groove x Groove inches lb Price Each
Gate Valve 2½ 45.2 $1492.50
3 68.1 1940.00
SERIES 371 4 88.2 2283.00
8 246.0 4790.00
10 352.0 6447.00
12 487.2 10054.50
Series 371 Gate Valve conforms to the requirements of AWWA C509.
Multiple actuation options are available upon request. Contact Victaulic for details.

Series W371 OS&Y Gate Valve
OS&Y Approx. Series W371 OS&Y

Gate Valve Size Weight Each AGS x AGS
AGS x AGS inches lb Price Each
Gate Valve 14 709.9 $28397.00
16 914.9 34138.50
SERIES W371
Series W371 Gate Valve conforms to the requirements of AWWA C509.
Series 372 NRS Gate Valve
NRS Approx. Series 372 NRS

Gate Valve Size Weight Each Groove x Groove
Groove x Groove inches lb Price Each
Gate Valve 2½ 36.2 $1381.50
3 49.6 1855.50
SERIES 372 4 71.9 2209.00
8 198.4 4181.50
10 304.2 6075.00
12 425.5 8499.00
Series 372 Gate Valve conforms to the requirements of AWWA C509.
Series W372 NRS Gate Valve
NRS Approx. Series W372 NRS

Gate Valve Size Weight Each AGS x AGS
AGS x AGS inches lb Price Each
Gate Valve 14 610.7 $15347.00
16 824.5 20407.00
SERIES W372
Series W372 Gate Valve conforms to the requirements of AWWA C509.

Series 906 Knife Gate Valve
Knife Gate Valve for Plain End

HDPE Pipe
SERIES 906
For information on Series 906 Knife Gate

Valve for HDPE Pipe see Section 10 – HDPE
Products.
with with with Hydraulic

Manual Pneumatic Actuator
Actuator Actuator

Series 795 Knife Gate Valve
Knife Gate Valve for Grooved

IPS Steel Pipe
SERIES 795
with with with

Manual Pneumatic Hydraulic
Actuator Actuator Actuator
3” 4” 6” 8” 10” 12”
Size (030) (040) (060) (080) (100) (120)
VALVE WITH MANUAL ACTUATOR
Manual Actuator with Grade “E” or “T” Gasket $5733.00 $9172.00 $10394.50 $12992.50 $19106.50 $22163.00
VALVE WITH MANUAL ACTUATOR WITH STEM GUARD
Manual Actuator with Grade “E” or “T” Gasket + + + + + +
VALVE WITH PNEUMATIC ACTUATOR
Pneumatic Actuator with Grade “E” or “T” Gasket $7643.00 $9936.00 $12992.50 $15285.50 $23692.50 $26749.00
VALVE WITH PNEUMATIC ACTUATOR AND SOLENOID VALVE
Pneumatic Actuator with Weatherproof Enclosure
$9320.50 $11613.00 $14817.50 $17111.00 $25517.50 $26457.50
(Any Voltage) Grade “E” or “T” Gasket
Pneumatic Actuator with Hazardous Location Enclosure
10075.50 12367.50 15468.50 17760.00 26167.00 27059.00
VALVE WITH PNEUMATIC ACTUATOR AND LIMIT SWITCHES
$8088.00 $10380.50 $13438.00 $15729.50 $24135.50 $27192.00
10008.00 12301.00 15358.00 17760.00 26056.00 29113.00
VALVE WITH PNEUMATIC ACTUATOR LIMIT SWITCHES AND SOLENOID VALVE
$9765.00 $12057.50 $15262.50 $17555.00 $25961.50 $29113.00
12440.50 12440.50 17832.00 20125.00 28530.50 31588.00
VALVE WITH PNEUMATIC ACTUATOR AND TRANSDUCER/POSITIONER
Pneumatic Actuator with Weatherproof Enclosure Linear
$13047.50 $15339.50 $18435.00 $20897.50 $20897.50 $32696.50
Position Transducer Grade “E” or “T” Gasket
Transducer and Electro-pneumatic Positioner 18221.00 20443.00 23525.00 25817.00 34248.50 37306.00
Grade “E” or “T” Gasket

NOTE: All configurations available with stainless steel bolts and nuts. Contact Victaulic for pricing.

3” 4” 6” 8” 10” 12”
Size (030) (040) (060) (080) (100) (120)
VALVE WITH HYDRAULIC ACTUATOR
Hydraulic Actuator with Grade “E” or “T” Gasket $7643.00 $9936.00 $12992.50 $15285.50 $23692.50 $26749.00
VALVE WITH HYDRAULIC ACTUATOR AND TRANSDUCER
Hydraulic Actuator with Hydraulic Weatherproof Enclosure
$13047.50 $15340.00 $18435.50 $20897.50 $29606.50 $32696.50
Linear Position Transducer Grade “E” or “T” Gasket
VALVE WITH ELECTRIC ACTUATOR
Electric Actuator with Grade “E” or “T” Gasket + + + + + +
PNEUMATIC CYLINDER LIMIT SWITCHES (Price per set of 2)
Weatherproof Enclosure (Any Voltage) $445.50 $445.50 $445.50 $445.50 $445.50 $445.50
SEAT CARTRIDGE KIT
Includes Replacement Knife/Packing/Seat $3059.00 $3822.50 $4586.50 $6878.50 $10318.50 $13527.50

V - 120 - 795 - G - N - E - 1 - P - 1 - A - 1
Product Gate Material

Class Size Style Housing Coating Pipe/Seat Gasket or Coating Actuation Type Actuation Control Options Enclosure Options Hardware
V 030 - 3" 795 G - Groove x Groove N - Standard - E - EPDM 1 - 316 Stainless P - Pneumatic (3 – 12") 0 - None 0 - None 1 - Standard -
040 - 4" Electroless T - Nitrile Steel H - Hydraulic (3 – 12") 1 - Pneumatic with Solenoid A Weatherproof Carbon Steel
060 - 6" Nickel E - Electric (3 – 12") Valve (24VDC) Enclosure Zinc Plated
080 - 8" M - Handwheel (3 – 8") 2 - Pneumatic with Limit Switches B - Hazardous 2 - Stainless Steel
100 - 10" B - Bevel Gear (10 – 12") (5-240V AC/DC) Location Enclosure
120 - 12" 9 - Special 3 - Pneumatic with Solenoid Valve 9 - Special
(110-120 VAC)
4 - Pneumatic with Solenoid Valve
(24VDC) and Limit Switches
5 - Pneumatic with Solenoid Valve
(110-120 VAC) and Limit
Switches
6 - Pneumatic with Positioner/
Transducer (420 mA)
7 - Hydraulic with Transducer
8 - Stem Guard for M and B
Actuators
9 - Special
NOTE: Electric actuation and other special actuation control options can be quoted upon request. Contact Victaulic for pricing and availability.
Series 7340 Grooved End Metering Station – Orifice Type
Grooved End Metering SERIES 7340 GROOVED END METERING STATION – ORIFICE TYPE
Approx.
Station – Orifice Type Nominal Size Weight Each
SERIES 7340
2 2.7 +
2½ 3.1 +
3 3.4 +
4 4.7 +
5 5.9 +
6 7.4 +
8 9.4 +
10 19.3 +
12 21.1 +

Grooved IPS Pipe Accessories
Series 731-D Suction Diffuser

Suction Diffuser SERIES 731-D – SUCTION DIFFUSER
Grvd. End Inlet

SERIES 731-D x Flanged Outlet Approx. Centerline of Inlet
Nominal Size Wgt Each Pipe to Flange Face
Refer to publication 09.20 inches lb Inches Price Each
3 x 2 20.1 6.30 $5766.00
2½ 26.0 6.30 4146.50
3 27.7 6.30 4201.00
4 x 2½ 29.7 7.40 4554.50
3 31.6 7.40 4913.50
4 34.6 7.40 5690.50
5 x 2½ 46.2 8.40 6826.00
3 46.2 8.40 7964.50
4 49.4 8.40 6342.50
5 52.3 8.40 6662.00
6 x 4 64.0 9.00 6761.50
5 67.3 9.00 8085.00
6 70.3 9.00 8396.00
8 x 5 98.5 10.20 8610.50
6 102.1 10.20 9080.50
8 110.7 10.20 15621.50
10 x 6 150.6 12.40 16217.50
8 159.9 12.40 17624.00
10 172.0 12.40 21233.00
12 x 8 245.4 15.43 22232.50
10 260.3 15.43 25133.00
12 273.2 15.43 34954.50
Start up baskets are available. Contact Victaulic for pricing.
Series W731-D AGS Suction Diffuser
Suction Diffuser AGS SERIES W731-D – SUCTION DIFFUSER
Grvd. End Inlet

AGS SERIES W731-D x Flanged Outlet Approx. Centerline of Inlet
Nominal Size Wgt Each Pipe to Flange Face
Refer to publication 20.20 inches lb Inches ANSI Class 150 Flange
14 x 10 328.9 16.1 $23884.00
12 345.8 16.1 26680.00
14 367.6 16.1 32398.00
16 x 12 464.5 19.6 35421.00
14 489.9 19.6 33344.50
16 514.2 19.6 35421.00
18 x 14 788.6 21.7 49984.00
16 812.9 21.7 51007.00
18 828.3 21.7 48082.50
20 x 16 955.0 24.4 67834.00
18 970.5 24.4 68471.00
20 1019.0 24.4 66101.50
24 x 18 1255.8 26.4 101653.50
20 1337.4 26.4 107248.00
24 1401.3 26.4 107981.50
Start up baskets are available. Contact Victaulic for pricing.

Series 730 Vic-Strainer Tee Type Strainer
Tee-Type Strainer SERIES 730 – TEE TYPE STRAINER
Approx. Standard Fine Mesh

SERIES 730 Nominal Size Weight Each Price Each Basket Only Basket Only †
Refer to publication 09.02 inches lb Standard * Galvanized Price Each Price Each
1½ 7.0 $2193.00 $2431.50 + +
2 8.0 2805.50 3287.50 $1931.00 +
2½ 9.0 2947.00 3473.00 2014.00 +
3 21.0 3306.00 3958.00 2098.00 NR +
4 20.5 3741.50 4583.50 1822.00 +
5 31.0 5419.00 6485.50 1945.00 +
6 44.0 5878.00 7167.50 1981.50 NR +
8 90.6 9008.50 11060.50 2190.00 +
10 136.0 13224.50 16323.00 5167.00 +
12 197.0 17023.00 20961.00 6196.50 +
* Series 730 Tee-Type Strainer standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM
gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details. Series 730 supplied with an NPT
tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. 12 mesh screens standard for 1½ – 3”; 6 mesh for 4 – 16”, and 4
mesh for 18 – 30”.
NOTE: Series 730 Vic-Strainers in sizes 14 – 24” have a standard groove for retrofit only and must not be used with Advanced
Groove System (AGS) products. Contact Victaulic for pricing and availability.
NR
Non-returnable
Series W730 AGS Vic-Strainer Tee Type Strainer
Tee-Type Strainer AGS SERIES W730 – TEE-TYPE STRAINER
Approx. Standard Fine Mesh †

AGS SERIES W730 Nominal Size Weight Each Price Each Basket Only Basket Only
inches lb Standard * Price Each Price Each
14 300.0 $43717.50 + +
16 350.0 54333.00 + +
18 400.0 71459.50 + +
20 565.0 92090.00 + +
24 830.0 112978.50 + +
* Series W730 AGS Tee-Type Strainer standard components include ductile iron body, access cap and coupling (with Grade “E”
EPDM gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.
Series W730 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. 6 mesh screens standard for 14 – 16”, and 4 mesh for 18 – 24”.

Series 732 Vic-Strainer Wye Type Strainer
Grooved End SERIES 732 – GROOVED END VIC-STRAINER
Approx.
Vic-Strainer Nominal Size Weight Each Price Each †
Standard Fine Perforated
SERIES 732 inches lb Standard * Galvanized Basket Only Basket Only
Refer to publication 09.03 2 10.0 $2839.00 $3175.50 $2076.00 +
2½ 14.0 2983.00 3377.00 2163.00 +
3 20.0 3350.50 3851.00 1881.50 +
4 32.0 3792.00 4480.50 1955.00 +
5 50.0 5485.00 6532.00 2088.50 +
6 72.0 5951.50 7326.00 2130.50 +
8 125.0 9122.00 11414.00 2342.50 +
10 205.0 14658.00 18398.50 5552.50 +
12 280.0 25596.00 31106.50 6660.50 +
* Vic-Strainer Series 732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM or
Nitrile Grade “T” gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.
Series 732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. Standard stainless metal baskets are offered for the following sizes:
0.062” diameter holes for 2 – 3” sizes; 0.125” diameter holes for 4 – 12” sizes.
Series W732 AGS Vic-Strainer Wye Type Strainer
Wye Type SERIES W732 – WYE TYPE VIC-STRAINER
Approx.
Vic-Strainer Nominal Size Weight Each Price Each
Standard Fine Perforated
SERIES W732 inches lb Standard * Basket Only Basket Only †
Refer to publication 20.19 14 425.0 $46272.50 $18854.00 +
16 600.0 57508.50 23432.00 +
18 800.0 72392.50 30536.00 +
* Vic-Strainer Series W732 standard components include ductile iron body, access cap and coupling (with Grade “E” EPDM
gasket, plated bolts and nuts) and Type 304 stainless steel basket. Contact Victaulic for details.
Series W732 supplied with an NPT tap and plug to accommodate a drain or blow-down valve.
† Contact Victaulic for application and pricing information. Standard stainless steel baskets are offered for the following sizes:
0.156”/4 mm diameter for holes 14 – 18”/355,6 – 457,0 mm sizes.

Victaulic Series 968-F/Bermad Model BC-70F-P Strainer
Strainer (400 psi) Nominal Size Strainer

Grooved (Standard) Female Threaded (NPT) Flanged (ANSI 300)
VICTAULIC SERIES 968-F Victaulic Part Victaulic Part Victaulic Part
BERMAD MODEL BC-70F-P inches Code Price Each Code Price Each Code Price Each
1½ S014968F0G $972.50 S014968F0T $1256.50 S014968F0F $1252.50
Ductile Iron Body - Epoxy 2 S020968F0G 976.00 S020968F0T 1267.00 S020968F0F 1292.00
Coated
2½ S024968F0G 1470.50 S024968F0T 1766.00 S024968F0F 1845.50
Y-Pattern
SS Basket 3 S030968F0G 2057.00 S030968F0T 2353.00 S030968F0F 2511.00
Pressure up to 400 psi 4 S040968F0G 2726.00 – – S040968F0F 3360.00
6 S060968F0G 3073.50 – – S060968F0F 4064.00
8 S080968F0G 5687.00 – – S080968F0F 6714.50
* Other finishes and valve body materials available upon request.
Victaulic Series 968-F-SS/Bermad Model BC-70F-P-SS Strainer
Strainer (400 psi) Nominal Size Strainer

Flanged (ANSI 150) Flanged (ANSI 300)
VICTAULIC SERIES 968-F-SS 250 psi 400 psi
BERMAD MODEL BC-70F-P-SS inches Victaulic Part Code Price Each Victaulic Part Code Price Each
1½ S014968X0F $4910.00 S014968XHF $9475.00
Stainless Steel 316 Body 2 S020968X0F 6138.50 S020968XHF 10346.00
Y-Pattern
2½ S024968X0F 8793.50 S024968XHF 11511.00
SS 304 Basket
Pressure up to 400 psi 3 S030968X0F 11178.50 S030968XHF 15935.50
4 S040968X0F 12822.00 S040968XHF 27114.00
6 S060968X0F 22116.00 S060968XHF 39667.50
8 S080968X0F 35810.00 S080968XHF 60318.00

Victaulic Series 969-F/Bermad Model BC-80F-P High Pressure Strainer
High Pressure Strainer Nominal Size Strainer

(600 psi) Grooved (Standard) Female Threaded Flanged (ANSI 300)
Victaulic Part Victaulic Part Victaulic Part
inches Code Price Each Code Price Each Code Price Each
VICTAULIC SERIES 969-F
1½ S014969F0G $3342.00 S014969F0T $3637.00 S014969F0F $3600.00
BERMAD MODEL BC-80F-P
2 S020969F0G 3739.50 S020969F0T 4036.00 S020969F0F 4092.00
Ductile Iron Body - Epoxy 2½ S024969F0G 4449.00 S024969F0T 4746.50 S024969F0F 4823.00
Coated 3 S030969F0G 5990.50 S030969F0T 6287.00 S030969F0F 6444.50
Y-Pattern 4 S040969F0G 6068.50 – – S040969F0F 6704.50
SS Basket
6 S060969F0G 12575.00 – – S060969F0F 13565.00
Pressure up to 600 psi
8 S080969F0G 16074.50 – – S080969F0F 17102.00
Style 150 Mover Expansion Joint
Mover STYLE 150 – MOVER EXPANSION JOINT
Maximum Grooved and Plain End

Expansion Joint Approx. Available “E” or “T”
Size Weight Each Expansion Price Each
STYLE 150 inches lb Inches Painted Galv.
Refer to publication 09.04 2 15.9 3 $3535.00 $4163.50
3 25.6 3 4060.50 4783.50
4 39.6 3 5350.00 6299.50
5 55.0 3 6798.00 8150.00
6 75.0 3 8312.50 9790.50
Victaulic Style 150 Expansion Joints are supplied fully assembled, with a Grade “E” gasket for water services up to +230°F. For
other gaskets and services consult Victaulic. Style 150 Expansion Joints are supplied with plain ends for installation using two
Roust-A-Bout Style 99 couplings, or with grooved ends for installation using Victaulic Coupling Style 77, 75, HP-70 or 07
Zero-Flex™ couplings.
NOTE: Style 155 Expansion Joints in sizes ¾ – 24” are available. Style 155 Expansion Joints are non-cancellable and
non-returnable. Contact Victaulic for details.

Style 155 Expansion Joint
Expansion Joint
STYLE 155
STYLE 155 – EXPANSION JOINT
Painted Couplings and Galvanized Couplings COUPLING COMPLETE with Grade COUPLING COMPLETE with Grade
Uncoated CS Pipe and Galvanized CS Approx. “E” or “T” Gasket and Carbon “E” or “T” Gasket and Stainless
Sections Pipe Sections Wgt. Ea. Steel Bolts & Nuts Steel Bolts & Nuts
Painted Galvanized Galvanized Painted Galvanized Galvanized
Couplings Couplings Couplings Couplings Couplings Couplings
and and or and and or
Total Total Uncoated Galvanized Galvanized Uncoated Galvanized Galvanized
Nominal Linear Neutral Linear Neutral CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe CS Pipe
Size Movement Position Movement Position Sections Sections Sections Sections Sections Sections
0.19 6.09 0.11 6.09 1.8 $2990.00 $3736.00 + + + +
0.38 8.43 0.23 8.43 3.2 3157.50 3945.00 + + + +
0.57 10.78 0.34 10.78 4.6 3323.00 4155.00 + + + +
0.76 13.12 0.46 13.12 6.0 3490.50 4364.00 + + + +
0.95 15.47 0.57 15.47 7.4 3657.50 4571.00 + + + +
1.14 17.81 0.68 17.81 8.8 3825.00 4780.50 + + + +
¾
1.33 20.16 0.80 20.16 10.2 3992.00 4990.50 + + + +
1.52 22.50 0.91 22.50 11.6 4158.50 5197.50 + + + +
1.71 24.85 1.03 24.85 13.1 4207.50 5259.00 + + + +
1.90 27.19 1.14 27.19 14.5 4256.50 5320.50 + + + +
2.09 29.54 1.25 29.54 15.9 4304.00 5380.00 + + + +
2.28 31.88 1.37 31.88 17.3 4352.50 5441.00 + + + +
0.19 6.09 0.11 6.09 1.8 3469.50 4337.00 + + + +
0.38 8.43 0.23 8.43 3.2 3570.00 4461.00 + + + +
0.57 10.78 0.34 10.78 4.6 3685.00 4606.00 + + + +
0.76 13.12 0.46 13.12 6.0 3806.00 4756.50 + + + +
0.95 15.47 0.57 15.47 7.4 3927.50 4907.00 + + + +
1.14 17.81 0.68 17.81 8.8 4049.50 5060.50 + + + +
1
1.33 20.16 0.80 20.16 10.2 4171.00 5213.50 + + + +
1.52 22.50 0.91 22.50 11.6 4294.50 5367.50 + + + +
1.71 24.85 1.03 24.85 13.1 4417.00 5521.50 + + + +
1.90 27.19 1.14 27.19 14.5 4541.00 5676.00 + + + +
2.09 29.54 1.25 29.54 15.9 4664.00 5829.00 + + + +
2.28 31.88 1.37 31.88 17.3 4787.50 5984.00 + + + +
When using the hot dipped galvanized coating, the movement capacity of the Style 155 Expansion Join is reduced due to the increased coating thickness. The following
reduction factors shall be applied to the “total linear movement” values:
- For either hot dipped galvanized couplings or pipe sections, reduce “total linear movement” by 20%.
- For both hot dipped galvanized couplings and pipe sections, reduce “total linear movement” by 40%.
For more information regarding compressed or expanded lengths, refer to submittal 09.05.

Expansion Joint
STYLE 155
0.19 8.09 0.11 8.09 3.6 $3982.00 $4977.00 + + + +
0.38 10.43 0.23 10.43 6.1 4171.00 5213.50 + + + +
0.57 12.78 0.34 12.78 8.7 4361.50 5451.00 + + + +
0.76 15.12 0.46 15.12 11.2 4549.00 5686.00 + + + +
0.95 17.47 0.57 17.47 13.7 4738.50 5921.50 + + + +
1.14 19.81 0.68 19.81 16.2 4927.00 6160.50 + + + +
1¼
1.33 22.16 0.80 22.16 18.8 5116.50 6394.50 + + + +
1.52 24.50 0.91 24.50 21.3 5306.00 6630.00 + + + +
1.71 26.85 1.03 26.85 23.8 5495.00 6869.00 + + + +
1.90 29.19 1.14 29.19 26.3 5683.50 7104.50 + + + +
2.09 31.54 1.25 31.54 28.9 5872.50 7339.00 + + + +
2.28 33.88 1.37 33.88 31.4 6060.50 7575.50 + + + +
0.19 8.09 0.11 8.09 4.1 4005.50 5006.00 + + + +
0.38 10.43 0.23 10.43 6.9 4268.50 5333.50 + + + +
0.57 12.78 0.34 12.78 9.7 4531.00 5664.00 + + + +
0.76 15.12 0.46 15.12 12.5 4794.00 5993.00 + + + +
0.95 17.47 0.57 17.47 15.4 5058.50 6321.50 + + + +
1.14 19.81 0.68 19.81 18.2 5321.00 6650.50 + + + +
1½
1.33 22.16 0.80 22.16 21.0 5584.00 6978.00 + + + +
1.52 24.50 0.91 24.50 23.8 5846.50 7309.00 + + + +
1.71 26.85 1.03 26.85 26.6 6111.00 7639.00 + + + +
1.90 29.19 1.14 29.19 29.4 6374.50 7966.50 + + + +
2.09 31.54 1.25 31.54 32.2 6636.50 8296.00 + + + +
2.28 33.88 1.37 33.88 35.0 6900.00 8625.50 + + + +

Expansion Joint
STYLE 155
0.19 8.09 0.11 8.09 4.0 $4060.00 $5074.00 + + + +
0.38 10.43 0.23 10.43 6.3 4261.00 5327.00 + + + +
0.57 12.78 0.34 12.78 8.6 4461.00 5576.50 + + + +
0.76 15.12 0.46 15.12 10.9 4662.50 5827.00 + + + +
0.95 17.47 0.57 17.47 13.2 4862.50 6077.50 + + + +
1.14 19.81 0.68 19.81 15.5 5062.00 6329.50 + + + +
2
1.33 22.16 0.80 22.16 17.7 5264.00 6580.00 + + + +
1.52 24.50 0.91 24.50 20.0 5465.50 6830.50 + + + +
1.71 26.85 1.03 26.85 22.3 5667.00 7081.50 + + + +
1.90 29.19 1.14 29.19 24.6 5867.50 7333.00 + + + +
2.09 31.54 1.25 31.54 26.9 6066.50 7583.50 + + + +
2.28 33.88 1.37 33.88 29.2 6268.50 7834.50 + + + +
0.19 8.09 0.11 8.09 5.9 4158.50 5197.50 + + + +
0.38 10.43 0.23 10.43 8.9 4384.00 5479.50 + + + +
0.57 12.78 0.34 12.78 12.0 4610.00 5761.00 + + + +
0.76 15.12 0.46 15.12 15.1 4837.50 6044.00 + + + +
0.95 17.47 0.57 17.47 18.2 5060.50 6325.00 + + + +
1.14 19.81 0.68 19.81 21.3 5286.00 6608.50 + + + +
2½
1.33 22.16 0.80 22.16 24.4 5513.00 6889.50 + + + +
1.52 24.50 0.91 24.50 27.5 5737.50 7172.00 + + + +
1.71 26.85 1.03 26.85 30.5 5962.50 7452.00 + + + +
1.90 29.19 1.14 29.19 33.6 6190.50 7735.50 + + + +
2.09 31.54 1.25 31.54 36.7 6413.50 8016.00 + + + +
2.28 33.88 1.37 33.88 39.8 6639.00 8298.50 + + + +

Expansion Joint
STYLE 155
0.19 8.09 0.11 8.09 7.6 $4278.00 $5345.00 + + + +
0.38 10.43 0.23 10.43 11.5 4562.00 5701.50 + + + +
0.57 12.78 0.34 12.78 15.4 4847.00 6058.50 + + + +
0.76 15.12 0.46 15.12 19.3 5132.00 6414.00 + + + +
0.95 17.47 0.57 17.47 23.2 5416.50 6771.50 + + + +
1.14 19.81 0.68 19.81 27.2 5702.00 7127.00 + + + +
3
1.33 22.16 0.80 22.16 31.1 5986.50 7483.50 + + + +
1.52 24.50 0.91 24.50 35.0 6271.00 7838.00 + + + +
1.71 26.85 1.03 26.85 38.9 6557.00 8196.00 + + + +
1.90 29.19 1.14 29.19 42.8 6841.50 8553.00 + + + +
2.09 31.54 1.25 31.54 46.8 7126.50 8908.50 + + + +
2.28 33.88 1.37 33.88 50.7 7412.00 9267.00 + + + +
0.25 12.10 0.15 12.10 3.5 4829.00 6035.00 + + + +
0.50 14.60 0.30 14.60 7.0 5164.50 6454.50 + + + +
0.75 17.11 0.45 17.11 10.5 5500.00 6875.50 + + + +
1.00 19.61 0.60 19.61 14.0 5835.50 7294.50 + + + +
1.25 22.12 0.75 22.12 17.5 6171.50 7713.00 + + + +
1.50 24.62 0.90 24.62 21.0 6507.00 8134.00 + + + +
4
1.75 27.13 1.05 27.13 24.5 6841.00 8552.50 + + + +
2.00 29.63 1.20 29.63 28.0 7177.50 8969.00 + + + +
2.25 32.14 1.35 32.14 31.5 7513.00 9389.50 + + + +
2.50 34.64 1.50 34.64 35.0 7847.00 9809.50 + + + +
2.75 37.15 1.65 37.15 38.5 8183.00 10230.00 + + + +
3.00 39.65 1.80 39.65 42.0 8519.00 10646.50 + + + +

Expansion Joint
STYLE 155
0.25 12.10 0.15 12.10 5.5 $5500.50 $6876.00 + + + +
0.50 14.60 0.30 14.60 11.0 5921.00 7401.00 + + + +
0.75 17.11 0.45 17.11 16.5 6342.00 7928.00 + + + +
1.00 19.61 0.60 19.61 22.0 6763.50 8455.00 + + + +
1.25 22.12 0.75 22.12 27.5 7184.50 8979.50 + + + +
1.50 24.62 0.90 24.62 33.0 7605.50 9507.00 + + + +
5
1.75 27.13 1.05 27.13 38.5 8026.50 10035.00 + + + +
2.00 29.63 1.20 29.63 44.0 8447.50 10560.50 + + + +
2.25 32.14 1.35 32.14 49.5 8868.50 11086.00 + + + +
2.50 34.64 1.50 34.64 55.0 9291.50 11613.50 + + + +
2.75 37.15 1.65 37.15 60.5 9711.50 12139.00 + + + +
3.00 39.65 1.80 39.65 66.0 10134.00 12667.00 + + + +
0.25 12.10 0.15 12.10 6.7 6603.00 8253.00 + + + +
0.50 14.60 0.30 14.60 13.4 7087.50 8856.50 + + + +
0.75 17.11 0.45 17.11 20.1 7567.00 9458.00 + + + +
1.00 19.61 0.60 19.61 26.8 8049.00 10060.50 + + + +
1.25 22.12 0.75 22.12 33.5 8531.50 10664.50 + + + +
1.50 24.62 0.90 24.62 40.2 9013.00 11267.00 + + + +
6
1.75 27.13 1.05 27.13 46.9 9497.00 11868.50 + + + +
2.00 29.63 1.20 29.63 53.6 9977.00 12471.00 + + + +
2.25 32.14 1.35 32.14 60.3 10459.00 13073.50 + + + +
2.50 34.64 1.50 34.64 67.0 10942.00 13675.50 + + + +
2.75 37.15 1.65 37.15 73.7 11423.00 14277.00 + + + +
3.00 39.65 1.80 39.65 80.4 11904.00 14882.00 + + + +

Expansion Joint
STYLE 155
0.25 12.13 0.15 12.13 12.5 $8022.00 $10026.50 + + + +
0.50 15.00 0.30 15.00 25.0 8766.00 10957.50 + + + +
0.75 17.88 0.45 17.88 37.5 9512.00 11888.00 + + + +
1.00 20.75 0.60 20.75 50.0 10255.00 12819.50 + + + +
1.25 23.63 0.75 23.63 62.5 10998.50 13749.00 + + + +
1.50 26.50 0.90 26.50 75.0 11744.50 14678.00 + + + +
8
1.75 29.38 1.05 29.38 87.5 12488.00 15611.00 + + + +
2.00 32.25 1.20 32.25 100.0 13231.00 16540.00 + + + +
2.25 35.13 1.35 35.13 112.5 13975.00 17469.50 + + + +
2.50 38.00 1.50 38.00 125.0 14720.50 18400.00 + + + +
2.75 40.88 1.65 40.88 137.5 15467.00 19331.50 + + + +
3.00 43.75 1.80 43.75 150.0 16208.00 20260.00 + + + +
0.25 16.13 0.15 16.13 82.3 9369.00 11709.00 + + + +
0.50 19.00 0.30 19.00 119.9 10583.50 13230.00 + + + +
0.75 21.88 0.45 21.88 157.4 11798.50 14750.00 + + + +
1.00 24.75 0.60 24.75 195.0 13015.00 16269.00 + + + +
1.25 27.63 0.75 27.63 232.6 14230.50 17788.50 + + + +
1.50 30.50 0.90 30.50 270.2 15447.50 19308.00 + + + +
10
1.75 33.38 1.05 33.38 307.8 16662.00 20828.50 + + + +
2.00 36.25 1.20 36.25 345.3 17878.00 22348.00 + + + +
2.25 39.13 1.35 39.13 382.9 19095.00 23867.50 + + + +
2.50 42.00 1.50 42.00 420.5 20310.00 25387.00 + + + +
2.75 44.88 1.65 44.88 458.1 21525.50 26905.50 + + + +
3.00 47.75 1.80 47.75 495.7 22740.50 28424.00 + + + +

Expansion Joint
STYLE 155
Painted Galvanized Painted Painted Galvanized Galvanized
and or and and and or
Total Total Uncoated Galvanized Uncoated Uncoated Galvanized Galvanized
0.25 16.13 0.15 16.13 100.3 $10177.50 $12720.50 + + + +
0.50 19.00 0.30 19.00 145.8 11611.50 14513.50 + + + +
0.75 21.88 0.45 21.88 191.4 13044.50 16306.50 + + + +
1.00 24.75 0.60 24.75 237.0 14479.50 18098.00 + + + +
1.25 27.63 0.75 27.63 282.5 15913.50 19891.00 + + + +
1.50 30.50 0.90 30.50 328.1 17347.00 21682.50 + + + +
12
1.75 33.38 1.05 33.38 373.6 18781.50 23475.50 + + + +
2.00 36.25 1.20 36.25 419.2 20214.50 25269.00 + + + +
2.25 39.13 1.35 39.13 464.8 21648.50 27060.00 + + + +
2.50 42.00 1.50 42.00 510.3 23083.00 28853.50 + + + +
2.75 44.88 1.65 44.88 555.9 24516.50 30644.00 + + + +
3.00 47.75 1.80 47.75 601.4 25950.00 32438.50 + + + +

Style 155 Expansion Joint Configurator
Painted Couplings and Uncoated Carbon Steel Pipe Sections
C A A N 155 P E Z
Size Movement
Class in/mm in Length Style Finish Gasket Bolts and Nuts
C A - ¾/26.9 A - 0.19 C - Compressed 155 P - Painted Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.25 N - Neutral and Uncoated Pipe 1 - FlushSeal EPDM X - Stainless Steel
C - 1¼/42.4 C - 0.38 E - Expanded Sections T - Nitrile
D - 1½/48.3 D - 0.50 2 - FlushSeal Nitrile
E - 2/60.3 E - 0.57 O - Fluoroelastomer
F - 2½/73.0 F - 0.75 L - Silicone
G - 76.1 mm G - 0.76 F - MWS EPDM
H - 3/88.9 H - 0.95 G - MWS Nitrile
I - 3½/101.6 I - 1.00
J - 4/114.3 J - 1.14
K - 5/141.3 K - 1.25
L - 139.7 mm L - 1.33
M - 6/168.3 M - 1.50
N - 165.1 mm N - 1.52
O - 8/219.1 O - 1.71
P - 10/273.0 P - 1.75
Q - 12/323.9 Q - 1.90
R - 2.00
S - 2.09
T - 2.25
U - 2.28
X - 2.50
Y - 2.75
Z - 3.00

Galvanized Couplings and Galvanized Carbon Steel Pipe Sections
(40% Reduced Maximum Linear Movement)
C A A N 155 G E Z
Size Movement
C A - ¾/26.9 A - 0.11 C - Compressed 155 G - Galvanized Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.15 N - Neutral and Galvanized 1 - FlushSeal EPDM X - Stainless Steel
C - 1¼/42.4 C - 0.23 E - Expanded Pipe Sections T - Nitrile
F - 2½/73.0 F - 0.45 L - Silicone
G - 76.1 mm G - 0.46 F - MWS EPDM
H - 3/88.9 H - 0.57 G - MWS Nitrile
I - 3½/101.6 I - 0.60
J - 4/114.3 J - 0.68
K - 5/141.3 K - 0.75
L - 139.7 mm L - 0.80
M - 6/168.3 M - 0.90
N - 165.1 mm N - 0.91
O - 8/219.1 O - 1.03
P - 10/273.0 P - 1.05
Q - 12/323.9 Q - 1.14
R - 1.20
S - 1.25
T - 1.35
U - 1.37
X - 1.50
Y - 1.65
Z - 1.80

Galvanized Couplings or Galvanized Carbon Steel Pipe Sections
(20% Reduced Maximum Linear Movement)
C A A N 155 1 E Z
Size Movement
C A - ¾/26.9 A - 0.15 C - Compressed 155 1 - Galvanized Couplings E - EPDM Z - Plated
B - 1/33.7 B - 0.20 N - Neutral 2 - Galvanized Pipe 1 - FlushSeal EPDM X - Stainless Steel
C - 1¼/42.4 C - 0.30 E - Expanded Sections T - Nitrile
F - 2½/73.0 F - 0.60 L - Silicone
G - 76.1 mm G - 0.61 F - MWS EPDM
H - 3/88.9 H - 0.76 G - MWS Nitrile
I - 3½/101.6 I - 0.80
J - 4/114.3 J - 0.91
K - 5/141.3 K - 1.00
L - 139.7 mm L - 1.06
M - 6/168.3 M - 1.20
N - 165.1 mm N - 1.22
O - 8/219.1 O - 1.37
P - 10/273.0 P - 1.40
Q - 12/323.9 Q - 1.52
R - 1.60
S - 1.67
T - 1.80
U - 1.82
X - 2.00
Y - 2.20
Z - 2.40

Style 155P Expansion Joint for OGS Potable Water Piping Systems
Expansion Joint for OGS

Potable Water Piping Systems
STYLE 155P
STYLE 155P – EXPANSION JOINT FOR OGS POTABLE WATER PIPING SYSTEMS
Painted Couplings & Uncoated SS Pipe Sections COUPLING COUPLING

COMPLETE COMPLETE
with Grade “P” with Grade “P”
Gasket and Gasket and
Carbon Steel Stainless Steel
Movement Bolts & Nuts Bolts & Nuts
Painted Couplings and Uncoated
Nominal Size Maximum Compressed Neutral Expanded Approx. Wgt. Ea. SS Pipe Sections
0.19 8.00 8.09 8.17 4.0 $5361.50 +
0.38 10.25 10.43 10.61 6.3 6029.00 +
0.57 12.50 12.78 13.05 8.6 6312.50 +
0.76 14.75 15.12 15.49 10.9 6597.50 +
0.95 17.00 17.47 17.93 13.2 6881.50 +
1.14 19.25 19.81 20.37 15.5 9551.50 +
2
1.33 21.50 22.16 22.81 17.7 9930.00 +
1.52 23.75 24.50 25.25 20.0 10311.50 +
1.71 26.00 26.85 27.69 22.3 10692.00 +
1.90 28.25 29.19 30.13 24.6 11069.50 +
2.09 30.50 31.54 32.57 26.9 11445.00 +
2.28 32.75 33.88 35.01 29.2 11826.50 +
0.19 8.00 8.09 8.17 5.9 7061.50 +
0.38 10.25 10.43 10.61 8.9 8271.50 +
0.57 12.50 12.78 13.05 12.0 8696.50 +
0.76 14.75 15.12 15.49 15.1 9126.50 +
0.95 17.00 17.47 17.93 18.2 9547.50 +
1.14 19.25 19.81 20.37 21.3 9972.50 +
2½
1.33 21.50 22.16 22.81 24.4 10400.00 +
1.52 23.75 24.50 25.25 27.5 12177.50 +
1.71 26.00 26.85 27.69 30.5 12654.00 +
1.90 28.25 29.19 30.13 33.6 13138.00 +
2.09 30.50 31.54 32.57 36.7 13915.00 +
2.28 32.75 33.88 35.01 39.8 13598.50 +
0.19 8.00 8.09 8.17 7.6 7264.00 +
0.38 10.25 10.43 10.61 11.5 8607.00 +
0.57 12.50 12.78 13.05 15.4 9143.50 +
0.76 14.75 15.12 15.49 19.3 9681.50 +
0.95 17.00 17.47 17.93 23.2 10984.50 +
1.14 19.25 19.81 20.37 27.2 11564.00 +
3
1.33 21.50 22.16 22.81 31.1 12142.50 +
1.52 23.75 24.50 25.25 35.0 12719.00 +
1.71 26.00 26.85 27.69 38.9 13298.00 +
1.90 28.25 29.19 30.13 42.8 13876.00 +
2.09 30.50 31.54 32.57 46.8 14454.00 +
2.28 32.75 33.88 35.01 50.7 15033.50 +



STYLE 155P

COMPLETE COMPLETE
0.25 11.97 12.1 12.22 3.5 $10020.50 +
0.5 14.35 14.6 14.85 7.0 10719.00 +
0.75 16.73 17.11 17.48 10.5 11413.50 +
1 19.11 19.61 20.11 14.0 12109.00 +
1.25 21.49 22.12 22.74 17.5 12807.00 +
1.5 23.87 24.62 25.37 21.0 13504.50 +
4
1.75 26.25 27.13 28 24.5 14197.50 +
2 28.63 29.63 30.63 28.0 14893.50 +
2.25 31.01 32.14 33.26 31.5 15591.50 +
2.5 33.39 34.64 35.89 35.0 16286.00 +
2.75 35.77 37.15 38.52 38.5 16981.50 +
3 38.15 39.65 41.15 42.0 17679.50 +
0.25 11.97 12.1 12.22 6.7 12458.00 +
0.5 14.35 14.6 14.85 13.4 14040.00 +
0.75 16.73 17.11 17.48 20.1 14990.00 +
1 19.11 19.61 20.11 26.8 15946.00 +
1.25 21.49 22.12 22.74 33.5 16902.00 +
1.5 23.87 24.62 25.37 40.2 17855.00 +
6
1.75 26.25 27.13 28 46.9 18813.00 +
2 28.63 29.63 30.63 53.6 19766.00 +
2.25 31.01 32.14 33.26 60.3 20719.00 +
2.5 33.39 34.64 35.89 67.0 21676.50 +
2.75 35.77 37.15 38.52 73.7 22628.50 +
3 38.15 39.65 41.15 80.4 23583.50 +
0.25 12 12.13 12.25 12.5 15134.50 +
0.5 14.75 15 15.25 25.0 16539.00 +
0.75 17.5 17.88 18.25 37.5 17947.00 +
1 20.25 20.75 21.25 50.0 19347.50 +
1.25 23 23.63 24.25 62.5 20751.00 +
1.5 25.75 26.5 27.25 75.0 23044.00 +
8
1.75 28.5 29.38 30.25 87.5 24504.00 +
2 31.25 32.25 33.25 100.0 25961.50 +
2.25 34 35.13 36.25 112.5 27422.50 +
2.5 36.75 38 39.25 125.0 28885.00 +
2.75 39.5 40.88 42.25 137.5 30348.50 +
3 42.25 43.75 45.25 150.0 31802.50 +



STYLE 155P

COMPLETE COMPLETE
0.25 16.00 16.13 16.25 82.3 $17676.00 +
0.50 18.75 19.00 19.25 119.9 19968.00 +
0.75 21.50 21.88 22.25 157.4 22260.00 +
1.00 24.25 24.75 25.25 195.0 24556.00 +
1.25 27.00 27.63 28.25 232.6 26849.00 +
1.50 29.75 30.50 31.25 270.2 29146.00 +
10
1.75 32.50 33.38 34.25 307.8 31436.50 +
2.00 35.25 36.25 37.25 345.3 33731.00 +
2.25 38.00 39.13 40.25 382.9 36926.50 +
2.50 40.75 42.00 43.25 420.5 39278.00 +
2.75 43.50 44.88 46.25 458.1 41630.00 +
3.00 46.25 47.75 49.25 495.7 43978.50 +
0.25 16.00 16.13 16.25 100.3 18241.50 +
0.50 18.75 19.00 19.25 145.8 20812.00 +
0.75 21.50 21.88 22.25 191.4 23380.50 +
1.00 24.25 24.75 25.25 237.0 25953.00 +
1.25 27.00 27.63 28.25 282.5 28524.00 +
1.50 29.75 30.50 31.25 328.1 31092.50 +
12
1.75 32.50 33.38 34.25 373.6 33664.00 +
2.00 35.25 36.25 37.25 419.2 36232.50 +
2.25 38.00 39.13 40.25 464.8 38803.00 +
2.50 40.75 42.00 43.25 510.3 41374.50 +
2.75 43.50 44.88 46.25 555.9 43943.00 +
3.00 46.25 47.75 49.25 601.4 46512.50 +


Style 155P Expansion Joint Configurator
Painted Couplings and Uncoated Stainless Steel Pipe Sections
C A A N 155P H P Z
Size
Class in/mm Movement Length Style Finish Gasket Bolts and Nuts
C E - 2/50 A - 0.19 C - Compressed 155 H - Painted Blue P - Fluoroelastomer Blend Z - Plated
F - 2½/65 B - 0.25 N - Neutral X - Stainless Steel
H - 3/80 C - 0.38 E - Expanded
J - 4/100 D - 0.50
M - 6/150 E - 0.57
O - 8/200 F - 0.75
P - 10/250 G - 0.76
Q - 12/300 H - 0.95
I - 1.00
J - 1.14
K - 1.25
L - 1.33
M - 1.50
N - 1.52
O - 1.71
P - 1.75
Q - 1.90
R - 2.00
S - 2.09
T - 2.25
U - 2.28
X - 2.50
Y - 2.75
Z - 3.00

Style 257 Dynamic Movement Joint
Dynamic Movement Joint

STYLE 257
STYLE 257 – DYNAMIC MOVEMENT JOINT
Overall
Nominal Size Actual Outside Dia. Settlement
1” 2” 3” 4”
inches No. Pairs Price Each
2 + + + +
2 2.375 3 + + + +
4 – + + +
2 + + + +
2½ 2.875 3 + + + +
4 – + + +
2 + + + +
3 3.500 3 + + + +
4 + + + +
2 + + + +
4 4.500 3 – + + +
4 – – + +
2 + + + +
5 5.562 3 – + + +
4 – + + +
2 + + + +
6 6.625 3 + + + +
4 – + + +
2 + + + +
8 8.625 3 + + + +
4 – + + +
2 + + + +
10 10.750 3 + + + +
4 + + + +
2 + + + +
12 12.750 3 + + + +
4 + + + +


Style W257 Dynamic Movement Joint
Dynamic STYLE W257 – DYNAMIC MOVEMENT JOINT
Actual Overall
Movement Joint Nominal Size Outside Dia. Settlement
1” 2” 3” 4”
STYLE W257
2 + + + +
14 14.000 3 + + + +
4 + + + +
2 + + + +
16 16.000 3 + + + +
4 + + + +
2 + + + +
18 18.000 3 + + + +
4 + + + +
2 + + + +
20 20.000 3 + + + +
4 + + + +
2 + + + +
22 22.000 3 + + + +
4 + + + +
2 + + + +
24 24.000 3 + + + +
4 + + + +
2 + + + +
26 26.000 3 + + + +
4 + + + +
2 + + + +
28 28.000 3 + + + +
4 + + + +
2 + + + +
30 30.000 3 + + + +
4 + + + +
2 + + + +
32 32.000 3 + + + +
4 + + + +
2 + + + +
34 34.000 3 + + + +
4 + + + +
2 + + + +
36 36.000 3 + + + +
4 + + + +

Actual Overall
1” 2” 3” 4”
STYLE W257
2 + + + +
38 38.000 3 + + + +
4 + + + +
2 + + + +
40 40.000 3 + + + +
4 + + + +
2 + + + +
42 42.000 3 + + + +
4 + + + +
2 + + + +
44 44.000 3 + + + +
4 + + + +
2 + + + +
46 46.000 3 + + + +
4 + + + +
2 + + + +
48 48.000 3 + + + +
4 + + + +
2 + + + +
50 50.000 3 + + + +
4 + + + +
2 + + + +
54 54.000 3 + + + +
4 + + + +
2 + + + +
56 56.000 3 + + + +
4 + + + +
2 + + + +
60 60.000 3 + + + +
4 + + + +
2 + + + +
62 62.000 3 + + + +
4 + + + +
2 + + + +
64 64.000 3 + + + +
4 + + + +

Actual Overall
1” 2” 3” 4”
STYLE W257
2 + + + +
72 72.000 3 + + + +
4 + + + +
2 + + + +
78 78.000 3 + + + +
4 + + + +
No. A10 Carbon Steel Riser Anchor
Carbon Steel Riser NO. A10 CARBON STEEL RISER ANCHOR
Approx.
Anchor Nominal Size Weight Each
NO. A10
2 10.0 $1173.50
2½ 14.0 1280.50
3 17.0 1351.50
4 30.0 1778.00
5 42.0 1956.50
6 68.0 2027.00
8 90.0 2169.50
10 135.0 2916.00
12 152.0 3342.50
No. A20 AGS Carbon Steel Heavy Riser Anchor
Carbon Steel Heavy NO. A20 CARBON STEEL HEAVY RISER ANCHOR
Approx.
Riser Anchor Nominal Size Weight Each
NO. A20
2 25.9 $4492.50
2½ 31.4 4617.50
3 36.3 4742.50
4 47.0 4992.00
5 58.3 5241.50
6 90.1 5491.00
8 125.2 5990.50
10 167.5 6489.00
12 197.9 6863.50

No. A40 Carbon Steel Riser Anchor for Tight Spaces
Carbon Steel Riser NO. A40 CARBON STEEL RISER ANCHOR FOR TIGHT SPACES
Approx.
Anchor for Tight Nominal Size Weight Each
Spaces inches lb Price Each
2 10.1 $1225.00
NO. A40 2½ 14.3 1336.00
4 25.1 1854.00
5 33.1 2309.00
6 55.3 2114.00
8 77.5 2746.00
10 117.4 3041.00
12 142.7 3485.00
Horizontal Pipe Clamp Anchors

No. A81 Long Adjustable Pipe Clamp Anchor
Long Adjustable Pipe NO. A81 LONG ADJUSTABLE PIPE CLAMP ANCHOR
Approx.
Clamp Anchor Nominal Size Weight Each Price Each
inches lb Painted
NO. A81
2 45.0 $3385.00
2½ 45.0 3394.50
3 45.0 3410.50
4 46.0 3493.00
5 48.0 3763.50
6 62.0 3990.50
8 64.0 4095.00
10 79.0 4759.50
12 82.0 5030.00
* Other coatings available upon request. Contact Victaulic for details.
No. A82 Short Adjustable Pipe Clamp Anchor
Short Adjustable Pipe NO. A82 SHORT ADJUSTABLE PIPE CLAMP ANCHOR
Approx.
Clamp Anchor Nominal Size Weight Each Price Each
inches lb Painted
NO. A82
2 29.0 $3237.00
2½ 29.0 3246.50
3 29.0 3262.00
4 30.0 3345.00
5 32.0 3615.00
6 43.0 3806.00
8 45.0 3910.00
10 59.0 4575.00
12 63.0 4845.50

No. A83 Long Fixed Pipe Clamp Anchor
Long Fixed Pipe NO. A83 LONG FIXED PIPE CLAMP ANCHOR
Nom. Approx. Price Approx. Price Approx. Price

Clamp Anchor Size Wgt. Ea. Length Each Wgt. Ea. Length Each Wgt. Ea. Length Each
inches lb inches Painted lb inches Painted lb inches Painted
NO. A83
2 48.3 $3037.50 51.2 $3319.50 54.2 $3729.50
2½ 48.6 3133.50 51.6 3479.50 54.5 3825.00
3 48.8 3149.50 51.8 3496.00 54.8 3841.00
4 52.4 3232.00 55.4 3578.00 58.4 3923.50
5 54.4 8.00 3502.50 57.4 11.00 3848.50 60.4 14.00 4194.00
6 71.3 3693.00 75.1 4025.00 78.9 4404.50
8 73.3 3797.50 77.1 4129.00 81.0 4508.00
10 95.6 4615.50 99.4 4808.00 103.2 5201.00
12 99.0 4732.50 102.8 5078.50 106.6 5471.50
No. A84 Short Fixed Pipe Clamp Anchor
Short Fixed Pipe NO. A84 SHORT FIXED PIPE CLAMP ANCHOR
Nom. Approx. Price Approx. Price Approx. Price

Clamp Anchor Size Wgt. Ea. Length Each Wgt. Ea. Length Each Wgt. Ea. Length Each
inches lb inches Painted lb inches Painted lb inches Painted
NO. A84
2 13.1 $1674.00 14.3 $1913.00 15.4 $2129.50
2½ 13.5 1683.00 14.6 1922.00 15.7 2139.00
3 13.7 1699.00 14.8 1938.50 16.0 2154.50
4 17.0 1759.00 18.4 1998.00 19.9 2214.50
5 19.0 3.00 2029.50 20.4 4.00 2268.00 21.9 5.00 2485.00
6 31.4 2115.00 34.2 2359.00 37.1 2580.50
8 33.4 2260.00 36.3 2463.00 39.1 2684.50
10 54.9 2884.00 58.5 3135.00 62.1 3363.50
12 58.3 3154.00 61.9 3405.50 65.5 3634.00
No. WA20 AGS Carbon Steel Heavy Riser Anchor
AGS Carbon NO. WA20 AGS CARBON STEEL HEAVY RISER ANCHOR
Approx.
Steel Heavy Riser Nominal Size Weight Each
Anchor inches lb Price Each
14 382.0 $15037.00
NO. WA20 16 421.3 16894.00
20 645.0 23219.00
24 741.6 24763.00

No. A190 Carbon Steel Riser Movement Fitting
Carbon Steel Riser NO. A190 CARBON STEEL RISER MOVEMENT FITTING
Approx.
Movement Fitting Nominal Size Weight Each
NO. A190
2 35.5 $4369.50
2½ 46.9 5095.50
3 57.3 5428.50
4 85.6 6685.00
6 151.4 10834.50
No. A191 Carbon Steel Anchor Outlet Fitting
Carbon Steel Anchor NO. A191 CARBON STEEL ANCHOR OUTLET FITTING
Approx.
Outlet Fitting Nominal Size Wgt Each
NO. A191
2 46.9 $3514.50
4 x 2½ 47.1 3514.50
3 47.3 3514.50
2 59.7 +
2½ 60.4 +
5 x
3 61.8 +
4 61.9 +
2 96.0 5145.50
2½ 95.8 5145.50
6 x
3 100.9 5145.50
4 99.4 5145.50
2 136.6 6463.50
2½ 142.1 6463.50
8 x 3 136.7 6670.50
4 144.9 7656.50
6 145.4 7656.50
2 218.7 9522.00
2½ 219.1 9584.00
10 x 3 216.7 9645.00
4 217.7 9709.00
6 215.7 10482.00
2 268.0 10691.50
2½ 266.0 10737.50
12 x 3 270.0 10781.00
4 268.0 10825.50
6 263.0 10915.50

SECTION 5 – Hydraulic Control Valves
Hydraulic Control
Valves

Hydraulic Control Valves
Victaulic Series 972/Bermad Model BC-720-P Pressure Reducing Valve

Pressure Reducing Valve
(250–400 psi)
VICTAULIC SERIES 972
BERMAD MODEL BC-720-P
Ductile Iron Body - Epoxy Coated

Y-Pattern
SS 316 Tube/Fitting with SS Control
Accessories
Nominal Size Basic PRV with V-Port (Standard)
Grooved (Standard) Female Threaded (NPT) Flanged (ANSI 150) Flanged (ANSI 300)
400 psi 400 psi 250 psi 400 psi
Victaulic Part Victaulic Part Victaulic Part Victaulic Part
inches Code Price Each Code Price Each Code Price Each Code Price Each
1½ S014972H0G $4550.00 S014972H0T $4886.50 S01497200F $4843.00 S014972H0F $4986.00
2 S020972H0G 4600.50 S020972H0T 4938.50 S02097200F 4600.50 S020972H0F 5149.50
2½ S024972H0G 4866.50 S024972H0T 5205.00 S02497200F 4866.50 S024972H0F 5451.50
3 S030972H0G 5709.00 S030972H0T 6048.00 S03097200F 5709.00 S030972H0F 6318.50
4 S040972H0G 6743.00 – – S04097200F 6743.00 S040972H0F 7687.50
6 S060972H0G 11559.50 – – S06097200F 12690.00 S060972H0F 13063.50
8 S080972H0G 15352.00 – – S08097200F 16526.50 S080972H0F 17013.50

Victaulic Series 972-SS/Bermad Model BC-720-P-SS Pressure Reducing Valve
Pressure Reducing Nominal Size Basic PRV with V-Port (Standard)

Valve (250–400 psi) Flanged (ANSI
250 psi
150) Flanged (ANSI
400 psi
300)
inches Victaulic Part Code Price Each Victaulic Part Code Price Each
VICTAULIC SERIES 972-SS
1½ S014972X0F $9201.50 S014972XHF $14706.00
BERMAD MODEL BC-720-P-SS
2 S020972X0F 10811.00 S020972XHF 16779.50
Stainless Steel 316 Body 2½ S024972X0F 13595.50 S024972XHF 16869.00
Stainless Steel 303 Internals 3 S030972X0F 16579.50 S030972XHF 22304.00
Y-Pattern 4 S040972X0F 18733.50 S040972XHF 35967.00
SS 316 Tube/Fitting and
6 S060972X0F 34315.00 S060972XHF 55478.50
Control Accessories
Pressure up to 400 psi 8 S080972X0F 51300.50 S080972XHF 80841.00

Victaulic Series 972-PD/Bermad Model BC-720-PD-P Proportional Pressure Reducing Valve
Proportional Pressure Nominal Size Proportional PRV

Reducing Valve Grooved (Standard) Female Threaded (NPT) Flanged (ANSI 300)
(400 psi) inches Code Price Each Code Price Each Code Price Each
1½ S014972P0G $3044.50 S014972P0T $3382.00 S014972P0F $3338.50
VICTAULIC SERIES 972-PD 2 S020972P0G 3097.00 S020972P0T 3435.50 S020972P0F 3498.50
BERMAD MODEL BC-720-PD-P
2½ S024972P0G 3363.50 S024972P0T 3702.00 S024972P0F 3791.50
Ductile Iron Body - Epoxy 3 S030972P0G 3406.50 S030972P0T 3745.00 S030972P0F 3925.00
Coated 4 S040972P0G 4440.00 – – S040972P0F 5164.50
Y-Pattern 6 S060972P0G 9204.00 – – S060972P0F 10334.50
SS 316 Tube/Fitting with SS 8 S080972P0G 12786.50 – – S080972P0F 13962.00
Control Accessories.
Pressure up to 400 psi NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Victaulic Series 972-PD-SS/Bermad Model BC -720-PD-P-SS Proportional Pressure Reducing Valve
Proportional Pressure Nominal Size Proportional PRV

Reducing Valve Flanged (ANSI
250 psi
150) Flanged (ANSI
400 psi
300)
(250 – 400 psi) inches Victaulic Part Code Price Each Victaulic Part Code Price Each
1½ S014972X1F $6786.00 S014972X3F $7411.50
VICTAULIC SERIES 972-PD-SS 2 S020972X1F 7715.50 S020972X3F 8385.50
BERMAD MODEL BC-720-PD-SS
2½ S024972X1F 8711.50 S024972X3F 9122.00
Stainless Steel 316 Body 3 S030972X1F 13335.00 S030972X3F 13711.00
Y-Pattern 4 S040972X1F 17097.00 S040972X3F 18369.50
SS 316 Tube/Fitting with SS 6 S060972X1F 29383.50 S060972X3F 34475.50
Control Accessories.

Victaulic Series 982-PP/Bermad Model BC-820-PP-P High Pressure Proportional Pressure Reducing Valve
High Pressure Nominal Size High Pressure Proportional PRV

Proportional Pressure Grooved (Standard) Female Threaded Flanged (ANSI 300)
Reducing Valve inches Code Price Each Code Price Each Code Price Each
(600 psi) 1½ S014982P0G $9199.50 S014982P0T $9603.50 S014982P0F $9567.00
2 S020982P0G 9262.50 S020982P0T 9625.00 S020982P0F 9691.50
VICTAULIC SERIES 982-PP 2½ S024982P0G 9783.50 S024982P0T 10122.00 S024982P0F 10213.50
BERMAD MODEL BC-820-PP-P 3 S030982P0G 13111.50 S030982P0T 13451.00 S030982P0F 13630.00
4 S040982P0G 17609.00 – – S040982P0F 18337.00
Ductile Iron Body - Epoxy
6 S060982P0G 31320.00 – – S060982P0F 32450.50
Coated
Y-Pattern 8 S080982P0G 46530.50 – – S080982P0F 47705.50
SS 316 Tube/Fitting with SS NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Control Accessories * Other finishes and valve body materials available upon request.
Victaulic Series 973-Q/Bermad Model 73Q-P Pressure Relief Valve
Pressure Relief Valve Nominal Size Pressure Relief

VICTAULIC SERIES 973-Q
1½ S014973Q0G $4961.00 S014973Q0T $5296.50 S014973Q0F $5254.50
BERMAD MODEL BC-73Q-P
2 S020973Q0G 5012.50 S020973Q0T 5352.00 S020973Q0F 5413.50
Ductile Iron Body - Epoxy 2½ S024973Q0G 5279.50 S024973Q0T 5618.50 S024973Q0F 5706.00
Coated 3 S030973Q0G 6005.50 S030973Q0T 6343.50 S030973Q0F 6522.50
Y-Pattern 4 S040973Q0G 6981.50 – – S040973Q0F 7707.50
SS 316 Tube/Fitting with SS
Control Accessories NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
With Mechanical Limit Switch * Other finishes and valve body materials available upon request.

Victaulic Series 973-QHP/Bermad Model BC-73Q-P Pressure Relief Valve
Pressure Relief Valve Nominal Size Pressure Relief

VICTAULIC SERIES 973-QHP
1½ S014973HQG $5990.50 S014973HQT $6325.50 S014973HQF $6285.50
BERMAD MODEL BC-73Q-P
2 S020973HQG 6039.50 S020973HQT 6378.00 S020973HQF 6441.00
Ductile Iron Body - Epoxy 2½ S024973HQG 6352.00 S024973HQT 6690.50 S024973HQF 6780.00
Coated 3 S030973HQG 7266.50 S030973HQT 7605.00 S030973HQF 7784.50
Y-Pattern 4 S040973HQG 8383.50 – – S040973HQF 9106.50
Control Accessories NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
With Mechanical Limit Switch * Other finishes and valve body materials available upon request.
Victaulic Series 979-4/Bermad Model BC-794-P Excessive Pressure Shut Off Valve
Excessive Pressure Shut-Off

Valve
VICTAULIC SERIES 979-4
Ductile Iron Body – Epoxy Coated

Y-Pattern
Accessories
Setting Range 15 – 230 psi
Nominal Size Excessive Pressure Shut-Off
Grooved (Standard) Female Threaded Flanged (ANSI 150) Flanged (ANSI 300)
400 psi 400 psi 250 psi 400 psi
Victaulic Part Victaulic Part Victaulic Part Victaulic Part
inches Code Price Each Code Price Each Code Price Each Code Price Each
1½ S01497940G $3533.50 S01497940T $4085.50 S01497940F $4257.00 S014979H0F $4289.00
2 S02097940G 3672.50 S02097940T 4159.50 S02097940F 4346.50 S020979H0F 4574.00
2½ S02497940G 5179.00 S02497940T 4210.50 S02497940F 4454.00 S024979H0F 4655.00
3 S03097940G 5386.00 S03097940T 4873.00 S03097940F 5281.50 S030979H0F 5599.00
4 S04097940G 5527.50 – – S04097940F 6263.50 S040979H0F 6574.00
6 S06097940G 9300.00 – – S06097940F 10717.50 S060979H0F 11114.50
8 S08097940G 15073.50 – – S08097940F 14235.00 S080979H0F 15257.00


Victaulic Series 979-4-SS/Bermad Model BC-794-P-SS Excessive Pressure-Shut Off Valve
Excessive Pressure Nominal Size Excessive Pressure Shut-Off

Shut-Off Valve Flanged (ANSI
250 psi
150) Flanged (ANSI
400 psi
300)
(250 – 400 psi) inches Victaulic Part Code Price Each Victaulic Part Code Price Each
1½ S014979X0F $8181.00 S014979XHF $8806.50
VICTAULIC SERIES 979-4-SS 2 S020979X0F 9111.50 S020979XHF 9774.50
BERMAD MODEL BC-794-P-SS
2½ S024979X0F 10107.50 S024979XHF 10517.00
Stainless Steel 316 Body 3 S030979X0F 15293.00 S030979XHF 15597.00
Y-Pattern 4 S040979X0F 18896.50 S040979XHF 20169.50
SS 316 Tube/Fitting with SS 6 S060979X0F 31027.50 S060979XHF 36119.50
Control Accessories
Victaulic Series 972S-H/Bermad Model BC-72S-H-P Pressure Reducing System with “Watchdog” Hydraulic Backup Valve
Pressure Reducing System

with “Watchdog” Hydraulic
Backup Valve
(400 psi)
VICTAULIC SERIES 972S-H
BERMAD MODEL BC-72S-H-P
Ductile Iron Body - Epoxy Coated

Y-Pattern
Accessories
Nominal Size Watchdog PRV
Grooved (Standard) Flanged (ANSI 150) Flanged (ANSI 300)
400 psi 250 psi 400 psi
inches Victaulic Part Code Price Each Victaulic Part Code Price Each Victaulic Part Code Price Each
1½ S014972S0G $11005.00 S014972S0F $11594.00 S014972SHF $11934.00
2 S020972S0G 11108.50 S020972S0F 11912.00 S020972SHF 12261.50
2½ S024972S0G 11641.00 S024972S0F 12496.50 S024972SHF 12864.50
3 S030972S0G 13179.00 S030972S0F 14214.50 S030972SHF 14634.00
4 S040972S0G 15192.00 S040972S0F 16642.50 S040972SHF 17132.50
6 S060972S0G 24765.50 S060972S0F 27027.50 S060972SHF 27821.50
8 S080972S0G 31891.50 S080972S0F 34240.00 S080972SHF 35247.00


Victaulic Series 972S-2B-H/Bermad Model BC-72S-2B-H-P Watchdog PRV Combo with Integrated Low-Flow Bypass
Watchdog PRV Combo Nominal Size Watchdog PRV Combo with Integrated Low-Flow Bypass
with Integrated Low- Grooved (Standard)
Flow Bypass 1½ S014972H2G $11729.00
(300 psi) 2 S020972H2G 11826.50
2½ S024972H2G 12322.00
VICTAULIC SERIES 972S-2B-H 3 S030972H2G 13755.50
BERMAD MODEL BC-72S-2B-H-P 4 S040972H2G 16122.00
Ductile Iron Body - Epoxy 6 S060972H2G 25044.50
Coated 8 S080972H2G 31686.00
Y-Pattern NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Control Accessories
Integrated Brass Direct Acting
PRV as Low-Flow Bypass (Series
935-H)
Victaulic Series 970-N/Bermad Model BC-70N-P Check Valve
Check Valve Nominal Size Check Valve, Lift Type

(400 psi) Grooved (Standard) Female Threaded (NPT) Flanged (ANSI 300)
VICTAULIC SERIES 970-N
1½ S014970N0G $2154.00 S014970N0T $2491.50 S014970N0F $2449.00
BERMAD MODEL BC-70N-P
2 S020970N0G 2135.50 S020970N0T 2473.50 S020970N0F 2536.50
Ductile Iron Body - Epoxy 2½ S024970N0G 2450.00 S024970N0T 2788.50 S024970N0F 2877.00
Coated 3 S030970N0G 3769.00 S030970N0T 4108.00 S030970N0F 4287.00
Y-Pattern 4 S040970N0G 4300.50 – – S040970N0F 4894.00
6 S060970N0G 10027.00 – – S060970N0F 11157.50
8 S080970N0G 12171.00 – – S080970N0F 13344.00

Victaulic Series 973/Bermad Model BC-730-P Pressure Relief/Sustaining Valve
Pressure Relief/ Nominal Size Pressure Relief/Sustaining

Sustaining Valve Grooved (Standard) Female Threaded Flanged (ANSI 150)
1½ S01497300G $4122.50 S01497300T $4458.00 S01497300F $4416.00
VICTAULIC SERIES 973 2 S02097300G 4174.00 S02097300T 4512.00 S02097300F 4575.50
2½ S02497300G 4440.00 S02497300T 4779.00 S02497300F 4868.00
Ductile Iron Body - Epoxy 3 S03097300G 5235.00 S03097300T 5573.50 S03097300F 5752.00
Coated 4 S04097300G 6255.00 – – S04097300F 6980.00
Y-Pattern 6 S06097300G 11922.00 – – S06097300F 13052.00
SS 316 Tube/Fitting with SS 8 S08097300G 15255.00 – – S08097300F 16428.50
Control Accessories
Victaulic Series 973-HP/Bermad Model BC-730-P Pressure Relief/Sustaining Valve
Pressure Relief/ Nominal Size Pressure Relief/Sustaining

Sustaining Valve Grooved (Standard) Female Threaded Flanged (ANSI 300)
1½ S014973H0G $5151.50 S014973H0T $5487.50 S014973H0F $5445.00
VICTAULIC SERIES 973-HP 2 S020973H0G 5200.50 S020973H0T 5538.50 S020973H0F 5603.00
2½ S024973H0G 5514.50 S024973H0T 5852.50 S024973H0F 5943.00
Ductile Iron Body - Epoxy 3 S030973H0G 6494.50 S030973H0T 6832.50 S030973H0F 7011.50
Coated 4 S040973H0G 7657.00 – – S040973H0F 8380.00
Y-Pattern 6 S060973H0G 13461.50 – – S060973H0F 14592.50
SS 316 Tube/Fitting with SS 8 S080973H0G 16983.50 – – S080973H0F 18158.00
Control Accessories
Victaulic Series 971/Bermad Model BC-710-P Solenoid Control Valve On/Off
Solenoid Control Valve Nominal Size Basic Solenoid Control Valve

On/Off Grooved (Standard)
(400 psi) 1½ S01497104G $5479.00
2 S02097104G 5527.00
VICTAULIC SERIES 971
2½ S02497104G 5797.00
3 S03097104G 6536.50
Ductile Iron Body - Epoxy 4 S04097104G 7516.50
Coated 6 S06097104G 11559.50
Y-Pattern 8 S08097104G 12152.00
24 VAC/Normally Open Valve
(Solenoid Energizes to Close) NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SS 316 Tube/Fitting with SS * Other finishes and valve body materials available upon request.
Control Accessories
With Mechanical Limit Switch

Victaulic Series 972-55/Bermad Model BC-720-55-P Solenoid Control Valve On/Off
Pressure Reducing Nominal Size Basic Solenoid Control Valve

Valve with Solenoid Grooved (Standard)
Control 1½ S014972H5G $7866.00
(400 psi) 2 S020972H5G 7940.00
2½ S024972H5G 8127.50
VICTAULIC SERIES 972-55 3 S030972H5G 8936.50
BERMAD MODEL BC-720-55-P 4 S040972H5G 9975.00
Ductile Iron Body - Epoxy 6 S060972H5G 13890.50
Coated 8 S080972H5G 29374.50
24 VAC/Normally Closed Valve * Other finishes and valve body materials available upon request.
(Solenoid Energizes to Open)
Control Accessories
With Mechanical Limit Switch

Victaulic Series 972-2B/Bermad Model BC-720-2B-P Pressure Reducing Valve with Integral Low-Flow Bypass
Pressure Reducing Nominal Size Pressure Reducing Valve with Integral Low-Flow Bypass
Valve with Integral Grooved (Standard)
Low-Flow Bypass 1½ S014972PLG $6083.00
(300 psi) 2 S020972PLG 6137.50
2½ S024972PLG 6398.00
VICTAULIC SERIES 972-2B 3 S030972PLG 7233.50
BERMAD MODEL BC-720-2B-P 4 S040972PLG 8783.50
Ductile Iron Body - Epoxy 6 S060972PLG 13562.00
Coated 8 S080972PLG 17326.00
Control Accessories and Brass
Low-Flow PRV
Victaulic Series 972-2B-SS/Bermad Model BC-720-2B-P-SS Pressure Reducing Valve with Integral Low-Flow Bypass
Pressure Reducing Nominal Size Pressure Reducing Valve with Integral Low-Flow Bypass
Valve with Integral Flanged (ANSI 150) Flanged (ANSI 300)
Low-Flow Bypass 1½ S014972X1L $8321.50 S014972X3L $8321.50
(300 psi) 2 S020972X1L 8432.00 S020972X3L 8432.00
2½ S024972X1L 9688.00 S024972X3L 9688.00
VICTAULIC SERIES 972-2B-SS 3 S030972X1L 13070.50 S030972X3L 13206.00
BERMAD MODEL BC-720-2B-P- 4 S040972X1L 16795.50 S040972X3L 18094.00
SS
6 S060972X1L 25189.50 S060972X3L 27658.50
Stainless Steel 316 Body 8 S080972X1L 40421.50 S080972X3L 43786.00
Control Accessories and Brass
Low-Flow Bypass PRV

Victaulic Series 975-82/Bermad Model BC-750-82 Level Control Valve with Modulating Altitude Pilot
Level Control Valve Nominal Size Basic Level Control Valve with V-Port
with Modulating Grooved (Standard)
Altitude Pilot 1½ S01497500G $11233.00
(250 psi) 2 S02097500G 11281.00
2½ S02497500G 11549.50
VICTAULIC SERIES 975-82 3 S03097500G 12373.50
BERMAD MODEL BC-750-82 4 S04097500G 13414.50
Ductile Iron Body - Fusion 6 S06097500G 18271.00
Bonded Epoxy Coated 8 S08097500G 21960.00
Level Settings: 7 - 46 ft. * Other finishes and valve body materials available upon request.
SS 316 Tube/Fitting and
Control Accessories
Victaulic Series 975-67/Bermad Model BC-750-67-P Level Control Valve with Modulating Vertical Float
Level Control Valve Nominal Size Basic Level Control Valve with V-Port (Standard)
with Modulating Grooved (Standard)
Vertical Float 1½ S01497567G $8579.00
(250 psi) 2 S02097567G 8628.00
2½ S02497567G 8898.50
VICTAULIC SERIES 975-67 3 S03097567G 9741.00
BERMAD MODEL BC-750-67-P 4 S04097567G 10769.50
Ductile Iron Body - Fusion 6 S06097567G 15592.00
Bonded Epoxy Coated 8 S08097567G 19279.50
SS 316 Tube/Fitting and * Other finishes and valve body materials available upon request.
Control Accessories

Victaulic Series 935-H/Bermad Model BC-CAP-P Direct Acting Pressure Reducing Valve
Direct Acting Pressure Nominal Size Direct Acting Pressure Reducing Valve
Reducing Valve FNPT Threads with Pressure Gauge
(300 psi) ½ S0049353FF $399.50
¾ S0069353FF 426.00
VICTAULIC SERIES 935-H
1 S0109353FF 546.50
BERMAD MODEL BC-CAP-P
1¼ S0129353FF 1117.00
Female Threaded Ends Only 1½ S0149353FF 1433.50
Pressure up to 300 psi 2 S0209353FF 1657.50
Victaulic Series 970/Bermad Series 700
Series 970 Nominal Size Configurable Valve Body

Bermad Series 700 inches Price Each
1½ +
Diaphragm Actuated Bare 2 +
Valve 2½ +
Ductile Iron Body – Epoxy 3 +
Coated (standard) 4 +
Y-Pattern (standard) 6 +
Customizable trim for
8 +
controlling pressure, flow, and
level 10 +
Pressure up to 400 psi 12 +
End connection options vary 14 +
by size 16 +
18 +
20 +
24 – 48 +
NOTE: For pricing valve options and configurations not listed above, contact Victaulic.

Victaulic Series 980/Bermad Series 800
Series 980 Nominal Size Configurable Valve Body

Bermad Series 800 inches Price Each
1½ +
Piston Actuated Bare Valve 2 +
Dustile Iron Body – Epoxy 2½ +
Coated (standard) 3 +
Y-Pattern (standard) 4 +
Customizable trim for 6 +
controlling pressure, flow, and
8 +
level
Pressure up to 600 psi 10 +
End connection options vary 12 +
by size 14 +
16 +
18 +
20 +

Hydraulic Control Valves Spare Parts
Spare Parts
NSF Actuator Nominal Size Victaulic
Assembly with V-Port 1½ – 2½* P014972ACT $1405.50
3 P030972ACT 1828.50
Grooved, Flanged or Threaded
4 P040972ACT 2566.50
Ends
6 P060972ACT 6211.00
*The list price for the 2½” size shown above is for flanged or threaded ends only.
NSF Actuator Nominal Size Victaulic

Assembly with V-Port 2½ P024972ACG $1617.50
2½” Grooved Ends Only NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Seal Disc Washer Nominal Size Victaulic

Grooved, Flanged or Threaded 1½ – 2½* P014972SDW $68.00
Ends 3 P030972SDW 92.50
4 P040972SDW 122.50
6 P060972SDW 248.00
Seal Disc Washer Nominal Size Victaulic

2½” Grooved Ends Only 2½ P024972SDG $87.50
NSF Elastomers Kit Nominal Size Victaulic

Grooved, Flanged or Threaded 1½ – 2½* P014972EK0 $194.50
Ends 3 P030972EK0 194.50
Kit includes necessary O-rings, 4 P040972EK0 219.00
diaphragm and seals 6 P060972EK0 578.50
NSF Elastomers Kit Nominal Size Victaulic Price Each

inches Part Code
2½” Grooved Ends Only 2½ P024972EKG $194.50
Kit includes necessary O-rings, NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
diaphragm and seals

Pilots Description Victaulic Part Code Price Each

For use with Victaulic Series 972 and Series 972-SS
P080972PIL $1920.50
Pressure Reducing Valves - Sizes 1½ – 14”
For use with Victaulic Series 973-Q and Series 973-
QHP Pressure Relief Valves and Victaulic Series 979-4
P000973PIL 1648.50
and Series 979-4HP Excessive Pressure Shut-Off
Valves
For use with Victaulic Series 972S-H Pressure
Reducing System with “Watchdog” Hydraulic Backup P000972SPI 3477.50
Valve

SECTION 6 – Air Valves
Air Valves

Air Valves
Series 9A7 Air Release Valve
Automatic Air Release Valves

Series 9A7 Nominal Size Operating Pressure: 1.5 – 230 psi Operating Pressure: 1.5 – 360 psi
Bermad Model A71 inches Victaulic Part Code Price Each Victaulic Part Code Price Each
¾ S0069A7N27 $1099.00 S0069A7N47 $1183.50
Type 316 stainless steel body 1 S0109A7N27 1128.50 S0109A7N47 1204.00
with NPT connection NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Refer to publication Engineering
A71

Air Valves
Series 9C3 Combination Air Valve
Combination Air Valves

Series 9C3 Nominal Size Operating Pressure: 1.5 – 230 psi
Bermad Model C30 With No Surge Protection or Inflow Prevention
¾ S0069C3P27 $322.00
Glass reinforced nylon body
with NPT connection 1 S0109C3P27 358.50
Refer to publication Engineering 2 S0209C3P27 701.50
C30 NOTE: For pricing valve options and configurations not listed above, contact Victaulic.
Series 9C7 Combination Air Valve
Series 9C7 Nominal Size Operating Pressure: 1.5 – 230 psi

Bermad Model C70 With No Surge Protection With Surge Protection
2 – NPT S0209C7C21 $1821.50 S0209C7C2A $2151.00
Ductile iron body with flange
connection unless otherwise 2 S0209C7C32 1945.00 S0209C7C3B 2300.50
noted 3 S0309C7C32 3049.00 S0309C7C3B 3625.00
Refer to publication Engineering 4 S0409C7C32 3563.00 S0409C7C3B 4135.00
C70 6 S0609C7C32 6362.00 S0609C7C3B 7283.50
8 S0809C7C32 11283.00 S0809C7C3B 12378.50
Nominal Size Operating Pressure: 1.5 – 360 psi

With No Surge Protection With Surge Protection
2 – NPT S0209C7C41 $1863.50 S0209C7C4A $2211.50
2 S0209C7C44 2405.50 S0209C7C4D 2783.50
3 S0309C7C44 3593.50 S0309C7C4D 4129.50
4 S0409C7C44 4005.50 S0409C7C4D 4362.00
6 S0609C7C44 6803.00 S0609C7C4D 7347.50
8 S0809C7C44 12145.50 S0809C7C4D 13518.00
Nominal Size Operating Pressure: 1.5 – 580 psi

With No Surge Protection With Surge Protection
2 – NPT S0209C7C51 $2030.50 S0209C7C5A $2435.50
2 S0209C7C54 2561.50 S0209C7C5D 3073.50
3 S0309C7C54 3709.50 S0309C7C5D 4266.00
4 S0409C7C54 4351.00 S0409C7C5D 5003.00
6 S0609C7C54 7489.50 S0609C7C5D 8239.50
8 S0809C7C54 13076.50 S0809C7C5D 14384.00

Air Valves
Series 9C5-P Combination Air Valve
Series 9C5-P Nominal Size Operating Pressure: 1.5 – 150 psi

Bermad Model C50-P With Surge Protection
2 – NPT S0209C54PM $3075.50
Nylon body, cover, and neck
with polypropylene lower float 3 – NPT S0309C54PT 3018.50
Flange connection unless 2 S0209C54PF 2982.50
otherwise noted 3 S0309C54PF 3133.50
Refer to publication Engineering 4 S0409C54PF 3160.00
C50
Series 9C5-N-N Combination Air Valve
Series 9C5-N-N Nominal Size Operating Pressure: 1.5 – 150 psi

Bermad Model With No Surge Protection With Surge Protection
C50-N-N 2 – NPT S0209C53XT $10125.50 S0209C56XT $10534.00
3 – NPT S0309C53XT 10953.00 S0309C56XT 11362.00
Stainless steel body, cover, and 2 S0209C53XF 11442.00 S0209C56XF 11851.50
neck with stainless steel lower
3 S0309C53XF 12455.00 S0309C56XF 12864.50
float
Flange connection unless 4 S0409C53XF 13239.00 S0409C56XF 13647.00
otherwise noted NOTE: For pricing valve options and configurations not listed above, contact Victaulic.
Refer to publication Engineering NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
C50-G-N-N
Series 9C5 Accessories
Series 9C5/Model C50 Nominal Size

inches Description Victaulic Part Code Price Each
Accessories 2–4 Inflow Prevention (IP) P0209C50IP $465.00
NOTE: Victaulic Series 9C5 (Bermad Model C50) combination air valves may be modified to include either surge protection or
inflow prevention, but never both.

SECTION 7 – Hydronic Balancing Products
Hydronic Balancing
Products

Hydronic Balancing Products
Manual Balancing Valves
TA Series 786H STAS – Solder End
Manual Balancing Valves

TA Series 786H TA SERIES 786H – STAS
Nominal Size Victaulic IMI TA

SOLDER END (400 PSI) inches Part Code Code List Price
Refer to publication 08.16 ½ V004786HBV 52-867-914 $147.00
¾ V006786HBV 52-867-920 154.50
1 V010786HBV 52-867-925 206.50
1¼ V012786HBV 52-867-932 314.50
1½ V014786HBV 52-867-940 362.50
2 V020786HBV 52-867-950 543.00
TA Series 787H STAD – NPT (Fem.) End
TA Series 787H TA SERIES 787H – STAD
Nominal Size Without Drain Kit With Drain Kit

NPT (FEM.) END (400 PSI) Victaulic Victaulic
Refer to publication 08.16 inches Part Code IMI TA Code List Price Part Code IMI TA Code List Price
½ V004787HBV 52-867-515 $143.00 V004787HDV 52-867-715 $244.00 NR
¾ V006787HBV 52-867-520 156.00 V006787HDV 52-867-720 256.00 NR
1 V010787HBV 52-867-525 209.50 V010787HDV 52-867-725 308.00 NR
1¼ V012787HBV 52-867-532 318.50 V012787HDV 52-867-732 417.50 NR
1½ V014787HBV 52-867-540 367.00 V014787HDV 52-867-740 466.00 NR
2 V020787HBV 52-867-550 547.50 V020787HDV 52-867-750 646.50 NR
NOTE: If a drain is needed for the Series 787H, be sure to choose the valve assembly with the factory installed option. Standard
Series 787H valves cannot be field retrofitted.
NR
Non-returnable
Series 78KH STADK
Series 78KH SERIES 78KH – STADK WITH UNION CONNECTION
Without Drain Kit With Drain Kit

MALE NPT UNION X FEM NPT Nominal Size Victaulic Part Code List Price Victaulic Part Code List Price
(400 PSI) ½ x ½ V00478KHBV $220.50 V00478KHDV $319.50
Refer to publication 08.16 ¾ VX8778KHBV 235.50 VX8778KHDV 335.50
¾ x ¾ V00678KHBV 235.50 V00678KHDV 335.50
1 VA6178KHBV 298.50 VA6178KHDV 398.50
1 x 1 V01078KHBV 298.50 V01078KHDV 398.50
1¼ VZ9078KHBV 387.00 VZ9078KHDV 486.00
1¼ x 1¼ V01278KHBV 387.00 V01278KHDV 486.00
1½ VZ9178KHBV 529.00 VZ9178KHDV 628.50
1½ x 1½ V01478KHBV 529.00 V01478KHDV 628.50
2 VJ8678KHBV 664.00 VJ8678KHDV 763.00
2 x 2 V02078KHBV 664.00 V02078KHDV 763.00
NOTE: Optional tailpieces must be ordered for double or triple reductions. If needed, specify tailpiece option when ordering.
NOTE: If a drain is needed for the Series 78KH, be sure to choose the valve assembly with the factory installed option. Standard
Series 78KH valves cannot be field retrofitted.

TA Series 788 STAF – Flanged End
TA Series 788 TA SERIES 788 – STAF

FLANGED END (250 PSI) inches Part Code Code List Price
2½ V024788CBV 52-167-965 $1355.00
Class 150 design 3 V030788CBV 52-167-980 2067.50
Refer to publication 08.16 4 V040788CBV 52-167-990 2848.50
5 V050788CBV 52-167-991 5095.50
6 V060788CBV 52-167-992 6513.50
8 V080788CBV 52-167-993 14072.00
10 V100788CBV 52-167-994 18277.50
12 V120788CBV 52-167-995 38263.50
14 V140788CBV 52-182-996 41521.50
16 V160788CBV 52-182-997 45444.00
TA Series 789 STAG – Grooved End
TA Series 789 TA SERIES 789 – STAG

GROOVED END (350 PSI) inches Part Code Code List Price
Refer to publication 08.16 2½ V024789CBV 52-167-073 $1171.50
3 V030789CBV 52-167-089 1819.50
4 V040789CBV 52-167-114 2515.00
5 V050789CBV 52-167-141 4550.00
6 V060789CBV 52-167-168 6094.00
8 V080789CBV 52-167-219 12979.00
10 V100789CBV 52-167-273 17028.00
12 V120789CBV 52-167-324 37000.00
TA Series 790 Balancing Valve for Potable Water Applications
TA Series 790 TA SERIES 790 – BALANCING VALVE FOR POTABLE WATER APPLICATIONS

BALANCING VALVE FOR POTABLE inches Part Code Code List Price
WATER APPLICATIONS ½ V004790HBV 52-863-615 $172.00
¾ V006790HBV 52-863-620 187.00
Female NPT Threaded Ends 1 V010790HBV 52-863-625 262.00
Refer to publication 08.59 1¼ V012790HBV 52-863-632 398.50
1½ V014790HBV 52-863-640 481.00
2 V020790HBV 52-863-650 711.50

TA Series 7TZ Therm Zero Valve for Potable Water Applications
TA Series 7TZ TA SERIES 7TZ – THERM ZERO VALVE FOR POTABLE WATER APPLICATIONS
Nominal Size Valve Only With PT Port With Thermometer

THERM ZERO VALVE FOR Victaulic Victaulic Victaulic
POTABLE WATER APPLICATIONS inches Part Code List Price Part Code List Price Part Code List Price
½ V0047TZ000 $439.00 V0047TZ0PT $463.50 V0047TZTHM $475.00
Female NPT Threaded Ends ¾ V0067TZ000 447.00 V0067TZ0PT 481.00 V0067TZTHM 482.50
Valve Only
With PT Port
With Thermometer

TA Series 7SM Control Valve
TA Series 7SM TA SERIES 7SM – CONTROL VALVE
Nominal Size Victaulic

CONTROL VALVE inches End Configuration Part Code List Price
Refer to publication 08.74 1¼ V0127SM0FF $3025.00
1½ Female V0147SM0FF 3196.50
2 V0207SM0FF 3791.50
1¼ V0127SM0SS 3025.00
1½ Sweat V0147SM0SS 3196.50
2 V0207SM0SS 3791.50
2½ V0247SMCBV 7294.00
Flanged
3 V0307SMCBV 7541.00
TA SERIES 7SM TEMPERATURE HOUSING
Nominal Size Thread Size

inches NPT Victaulic Part Code List Price
Female 1¼ 1¼ P0127SMHSG $157.00
Threaded 1½ 1½ P0147SMHSG 161.50
2 2 P0207SMHSG 295.50
TA SERIES 7SM THERMOWELL FOR 2¹⁄ AND LARGER VALVES
Size
NPT Victaulic Part Code List Price
¼ P0007SMTEM $65.50
TA SERIES 7SM TEMPERATURE SENSOR
Length
ft Victaulic Part Code List Price
9.8 P0007SMS3M $131.00
16.4 P0007SMS5M 142.00

Flanged NOTE: Valves come standard with temperature housing (1¼ – 2”) or thermowell (2¹⁄ and larger).

Domestic Water Kits – Series 7WB, Series 7W9, Series 7WT & Series 7WX
Domestic Water Kits SERIES 7WB DOMESTIC WATER KIT
Kit Size Victaulic

SERIES 7WB DOMESTIC WATER inches End Type Part Code List Price
KIT – WITH TA SERIES 78BL Copper Press K0047WB0PP $400.50
½
BALANCING BALL VALVE Sweat K0047WB0SS 400.50
Refer to publication 08.75 Copper Press K0067WB0PP 455.00
¾
Sweat K0067WB0SS 455.00
SERIES 7W9 DOMESTIC WATER KIT

SERIES 7W9 DOMESTIC WATER
Kit Size Victaulic
KIT – WITH TA SERIES 790
inches End Type Part Code List Price
BALANCING VALVE
Copper Press K0047W90PP $534.00
Refer to publication 08.75 ½
Sweat K0047W90SS 534.00
Copper Press K0067W90PP 622.00
¾
Sweat K0067W90SS 622.00
SERIES 7WT DOMESTIC WATER KIT - WITH THERMOMETER

SERIES 7WT DOMESTIC WATER
Kit Size Victaulic
KIT – WITH TA SERIES 7TZ
BALANCING CONTROL VALVE
Copper Press K0047WT0PP $1036.50
WITH THERMOMETER ½
Refer to publication 08.75 Sweat K0047WT0SS 1036.50
Copper Press K0067WT0PP 1146.00
¾
Sweat K0067WT0SS 1146.00
SERIES 7WT DOMESTIC WATER KIT – WITH PT PORT

SERIES 7WT DOMESTIC WATER
Kit Size Victaulic
KIT – WITH TA SERIES 7TZ
BALANCING CONTROL VALVE
Copper Press K0047WTPPP $874.50
WITH PT PORT ½
Refer to publication 08.75 Sweat K0047WTPSS 874.50
Copper Press K0067WTPPP 1109.50
¾
Sweat K0067WTPSS 1109.50

SERIES 7WX DOMESTIC WATER KIT

SERIES 7WX DOMESTIC WATER
Kit Size Victaulic
KIT – WITH TA SERIES 76X LOW
inches End Type GPM Part Code List Price
LEAD BALANCING VALVE
Copper Press K0047WX0PP $586.00
Refer to publication 08.75 ½ 0.5
Sweat K0047WX0SS 586.00
Copper Press K0067WX0PP 735.50
¾ 0.5
½ 1.0
¾ 1.0
½ 2.0
¾ 2.0
TA Series 78BL Balancing Ball Valve
Series 78BL Nominal Size Victaulic

inches End Configuration Part Code List Price
BALANCING BALL VALVE ½ V00478BLFF $130.00
¾ V00678BLFF 141.00
The Victaulic Series 78BL is 1 V01078BLFF 189.00
available as an alternative to Female x Female
1¼ V01278BLFF 286.50
the manual balancing valves
1½ V01478BLFF 330.50
when ordering a Victaulic
Koil-Kit™ Coil Pack. (Koil-Kit™ 2 V02078BLFF 494.00
Coil Pack Figure String Option: ½ V00478BLSS 132.00
Positions 18-22 for the Series ¾ V00678BLSS 138.50
78BL) 1 V01078BLSS 185.50
Refer to publication 08.50 Sweat x Sweat
1¼ V01278BLSS 283.50
1½ V01478BLSS 327.00
2 V02078BLSS 489.00
SERIES 78BL EXTENDED PT PORTS
Description Victaulic Part Code List Price

Kit of (2) Extended PT Ports K00078B2XT $60.50
TA SERIES 78BL HANDLE EXTENSIONS
Nominal Size
Female NPT inches Victaulic Part Code List Price
½–¾ P00478B2HL $77.00
1 – 1¼ P01078B2HL 96.50
1½ – 2 P01478B2HL 96.50
Sweat

TA Series 786H and 787H Insulation Kits
TA Series 786H and TA SERIES 786H & 787H – INSULATION KITS

787H inches Part Code List Price
½, ¾ K004784INS $44.00 NR
INSULATION KITS
1 K010784INS 47.50 NR
1¼ K012784INS 53.50 NR
1½ K014784INS 58.00 NR
2 K020784INS 70.00 NR
NR
Non-returnable
TA Series 788 and 789 Insulation Kits
TA Series 788 and TA SERIES 788 AND 789 – INSULATION KITS

789 inches Part Code Code List Price
2½ K024784INS 52-189-865 $763.00 NR
INSULATION KITS
3 K030784INS 52-189-880 849.00 NR
4 K040784INS 52-189-890 942.00 NR
5 K050784INS 52-189-891 1053.00
6 K060784INS 52-189-892 1299.50 NR
NR
Non-returnable
TA Series 786H Drain Kit
Kit 786H * TA SERIES 786H DRAIN KIT
Victaulic IMI TA
DRAIN KIT Part Code Code List Price
Refer to publication 08.16 K000786CBV 52-167-997 $101.00 NR
* For use with TA Series 786H valves only.
NOTE: If a drain is needed for a Series 787H or a Series 78KH, be sure to choose the valve assembly with the factory installed
option. Standard Series 787H or Series 78KH valves cannot be field retrofitted.
NR
Non-returnable

Spare Parts
Spare Parts IMI TA SPARE PARTS (FOR TA SERIES 786, TA SERIES 787H, SERIES 78KH, TA SERIES 788 AND TA SERIES 789)

Refer to publication 08.16 inches Part Code Code List Price
Replacement Probe Port
½–2 K000740003 52-179-014 $130.50 NR
2½ – 12 K000740002 52-167-811 145.00 NR
Extended (2⅜”) Port – Set of 2
2½ – 12 K000740001 52-167-812 196.00 NR
Handwheel - Plastic
½–2 P004784001 52-186-003 64.50 NR
2½ – 6 P024784001 52-186-002 203.50 NR
Probe Port Handwheel - Aluminum
for TA Series Probe Port 8 – 16 P080784001 52-167-822 1400.00 NR
786H/787H/ for TA Series
Measuring Probe
788/789 788/789
½ – 12 P000738100 307-635-62 322.50 NR
0 0
0 0 Probes for Series 738 Differential Gauge Meter

Without Valve K000740012 52-179-006 148.50 NR
STAD 2½ STAD 2½
NR
Non-returnable
NOTE: By measuring the pressure drop across measuring ports at a particular handwheel setting, the water flow for the valve
TA Series TA Series size can be read easily from the appropriate pressure drop graph or flow balancing wheel. Request flow balancing wheels from
786H/787H 788/789 your local Hydronic Balancing Specialist (Victaulic part number K000740000).
Plastic Plastic
Handwheel Handwheel
Z\x – 2” 2Z\x – 6”
TA Series
788/789
Aluminum
Handwheel
8 – 16”

Automatic Balancing Valves
Series 76T – Female x Female Threaded
Automatic Balancing Valves

Victaulic automatic balancing valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit™ Coil Pack.
Contact Victaulic for details. (Koil-Kit™ Coil Pack Figure String Option: Positions 18-22 for the automatic balancing valves, Positions 23 and 24
for the automatic valve cartridges.)
Series 76T SERIES 76T
Approx.
FEMALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
½ 1.3 V00476T0_ _ $245.00
¾ 1.3 V00676T0_ _ 247.00
1 1.5 V01076T0_ _ 273.50
1 HF 3.4 V01H76T0_ _ 519.00
1¼ 3.4 V01276T0_ _ 519.00
1½ 3.4 V01476T0_ _ 519.00
2 3.7 V02076T0_ _ 566.00
* Last two part code numbers are based on cartridge codes found in publication 08.34.
Prices shown reflect an automatic balancing valve body with either high or low flow cartridge(s).
Series 76B – Female x Female Threaded with Ball Valve Kit
Series 76B SERIES 76B
Approx.
FEMALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
WITH A BALL VALVE KIT
Refer to publication 08.34 ½ 1.7 V00476B0_ _ $392.00
¾ 2.1 V00676B0_ _ 399.50
1 2.6 V01076B0_ _ 465.00
1 HF 4.6 V01H76B0_ _ 712.00
1¼ 5.1 V01276B0_ _ 804.00
1½ 2.8 V01476B0_ _ 861.00
2 6.6 V02076B0_ _ 1008.00
Series 76K – Male x Female Threaded
Series 76K SERIES 76K
Approx.
MALE X FEMALE THREADED Nominal Size Wgt. Ea. Victaulic
½ 1.5 V00476K1_ _ $334.50
¾ 2.0 V00676K1_ _ 340.50
1 3.5 V01076K1_ _ 378.50
1 HF 5.4 V01H76K1_ _ 622.00
1¼ 5.4 V01276K1_ _ 622.00
1½ 5.5 V01476K1_ _ 712.00
2 5.9 V02076K1_ _ 716.50

Series 76V – Male x Female Threaded with Ball Valve Kit
Series 76V SERIES 76V
Approx.
Refer to publication 08.34 1¼ 7.2 V01276V1_ _ $893.00
1½ 7.9 V01476V1_ _ 1053.50
2 8.8 V02076V1_ _ 1161.00
Series 76V Integrated – Male x Female Threaded with Ball Valve Kit
Series 76V Integrated SERIES 76V INTEGRATED
Approx.
Refer to publication 08.34 ½ 1.9 V00476VB_ _ $226.50
¾ 2.8 V00676VB_ _ 255.00
1 4.7 V01076VB_ _ 265.00
1 HF 6.6 V01H76VB_ _ 638.00
Series 76G – Grooved
Series 76G SERIES 76G
Approx.
GROOVED Nominal Size Wgt. Ea. Victaulic
2½ 17.0 V02476G1 _ _ * $2696.00
3 18.0 V03076G1 _ _ * 2785.00
4 33.0 V04076G1 _ _ * 4310.50
6 52.0 V06076G1 _ _ * 8439.00
* For sizes 2½” and 3”, the last two part code numbers are based on cartridge codes found in publication 08.34. Please contact
Victaulic when configurating sizes 4” and 6”.
NOTE: The 4” size takes two (2) cartridges and the 6” size takes four (4) cartridges for sizing flows. Customer needs to provide
total flow rate when ordering.
Series 76T Accessories
Series 76T SERIES 76T ACCESSORIES – PT PORTS
Length Victaulic List Price

Accessories inches Color Part Code Each
Refer to publication 08.34 Red P00076T4XR $68.50
4
Blue P00076T4XB 68.50
NOTE: For use on Series 76T, 76B, 76K and 76V valve assemblies only.
PT Port

Automatic Balancing Valve Cartridges
Automatic Balancing Table A – Small Cartridges

Valve Cartridges Low Pressure No.
Max ∆P 43.5 psi
High Pressure No.
Max ∆P 87 psi
Flow min ∆P Figure String Position 23 & 24 Position 23 & 24
(Koil-Kit™ Coil Pack Figure gpm psi Victaulic Code Price Each Victaulic Code Price Each
String Option: Positions 18-22 Cartridge Type 10
for the Automatic Balancing
0.11 1.02 P00476TC1A $93.50 – –
Valves, Positions 23 and 24 for
the automatic valve 0.15 1.02 P00476TC1B 93.50 – –
cartridges.) 0.20 1.02 P00476TC1C 93.50 – –
Refer to publication 08.34 0.24 1.02 P00476TC1D 93.50 P00476TCAD $131.50
0.33 1.16 P00476TC1E 93.50 P00476TCAE 131.50
0.39 1.31 P00476TC1F 93.50 P00476TCAF 131.50
0.46 1.45 P00476TC1G 93.50 P00476TCAG 131.50
0.50 1.45 P00476TC1H 93.50 P00476TCAH 131.50
0.57 1.60 P00476TC1I 93.50 P00476TCAI 131.50
0.68 1.60 P00476TC1J 93.50 P00476TCAJ 131.50
0.77 1.74 P00476TC1K 93.50 P00476TCAK 131.50
0.90 1.74 P00476TC1L 93.50 P00476TCAL 131.50
1.06 1.74 P00476TC1M 93.50 P00476TCAM 131.50
1.23 1.74 P00476TC1N 93.50 P00476TCAN 131.50
1.41 1.89 P00476TC1O 93.50 P00476TCAO 131.50
1.54 1.89 P00476TC1P 93.50 P00476TCAP 131.50
1.76 1.89 P00476TC1Q 93.50 P00476TCAQ 131.50
2.10 2.03 P00476TC1R 93.50 P00476TCAR 131.50
2.40 2.03 P00476TC1S 93.50 P00476TCAS 131.50
Cartridge Type 11
2.71 2.03 P00476TC1T $93.50 P00476TCAT $131.50
2.95 2.03 P00476TC1U 93.50 P00476TCAU 131.50
3.24 2.03 P00476TC1V 93.50 P00476TCAV 131.50
3.52 2.32 P00476TC1W 93.50 P00476TCAW 131.50
3.83 2.76 P00476TC1X 93.50 P00476TCAX 131.50
4.12 3.05 P00476TC1Y 93.50 P00476TCAY 131.50
Cartridge Type 20
4.49 3.19 P00476TC2A $93.50 P00476TCBA $131.50
4.76 3.19 P00476TC2B 93.50 P00476TCBB 131.50
5.26 3.19 P00476TC2C 93.50 P00476TCBC 131.50
5.88 3.34 P00476TC2D 93.50 P00476TCBD 131.50
6.53 3.34 P00476TC2E 93.50 P00476TCBE 131.50
6.96 3.34 P00476TC2F 93.50 P00476TCBF 131.50
7.81 3.48 P00476TC2G 93.50 P00476TCBG 131.50
8.07 3.48 P00476TC2H 93.50 P00476TCBH 131.50
9.16 3.63 P00476TC2I 93.50 P00476TCBI 131.50
9.91 3.77 P00476TC2J 93.50 P00476TCBJ 131.50
10.21 3.92 P00476TC2K 93.50 P00476TCBK 131.50
10.78 4.06 P00476TC2L 93.50 P00476TCBL 131.50
For use with Series 76T/B/V/K Valves sizes ½, ¾, and 1”.

Automatic Balancing Table B – Large Cartridges

Valve Cartridges Low Pressure No.
Max ∆P 43.5 psi
High Pressure No.
Max ∆P 87 psi
Flow min ∆P Figure String Position 23 & 24 Position 23 & 24
(Koil-Kit™ Coil Pack Figure gpm psi Victaulic Code Price Each Victaulic Code Price Each
String Option: Positions 18-22 Cartridge Type 30
for the Automatic Balancing
2.97 1.74 P01076TC3A $204.00 P01076TCCA $283.00
Valves, Positions 23 and 24 for
the automatic valve 3.79 1.74 P01076TC3B 204.00 P01076TCCB 283.00
cartridges.) 4.49 1.74 P01076TC3C 204.00 P01076TCCC 283.00
Refer to publication 08.34 5.00 1.74 P01076TC3D 204.00 P01076TCCD 283.00
5.24 1.74 P01076TC3E 204.00 P01076TCCE 283.00
5.60 1.89 P01076TC3F 204.00 P01076TCCF 283.00
5.94 1.89 P01076TC3G 204.00 P01076TCCG 283.00
6.54 1.89 P01076TC3H 204.00 P01076TCCH 283.00
6.90 2.03 P01076TC3I 204.00 P01076TCCI 283.00
7.18 2.03 P01076TC3J 204.00 P01076TCCJ 283.00
7.99 2.03 P01076TC3K 204.00 P01076TCCK 283.00
8.81 2.18 P01076TC3L 204.00 P01076TCCL 283.00
9.00 2.32 P01076TC3M 204.00 P01076TCCM 283.00
9.56 2.32 P01076TC3N 204.00 P01076TCCN 283.00
10.00 2.47 P01076TC3O 204.00 P01076TCCO 283.00
10.48 2.47 P01076TC3P 204.00 P01076TCCP 283.00
11.00 2.61 P01076TC3Q 204.00 P01076TCCQ 283.00
11.62 2.61 P01076TC3R 204.00 P01076TCCR 283.00
12.64 2.76 P01076TC3S 204.00 P01076TCCS 283.00
14.05 3.05 P01076TC3T 204.00 P01076TCCT 283.00
15.00 3.19 P01076TC3U 204.00 P01076TCCU 283.00
15.35 3.19 P01076TC3V 204.00 P01076TCCV 283.00
Cartridge Type 40
16.00 2.90 P01076TC4A $204.00 P01076TCDA $283.00
16.20 3.05 P01076TC4B 204.00 P01076TCDB 283.00
18.00 3.05 P01076TC4C 204.00 P01076TCDC 283.00
19.00 3.05 P01076TC4D 204.00 P01076TCDD 283.00
20.00 3.19 P01076TC4E 204.00 P01076TCDE 283.00
21.00 3.19 P01076TC4F 204.00 P01076TCDF 283.00
22.00 3.34 P01076TC4G 204.00 P01076TCDG 283.00
24.00 3.48 P01076TC4H 204.00 P01076TCDH 283.00
26.00 3.63 P01076TC4I 204.00 P01076TCDI 283.00
28.00 3.77 P01076TC4J 204.00 P01076TCDJ 283.00
30.00 3.92 P01076TC4K 204.00 P01076TCDK 283.00
32.00 4.06 P01076TC4L 204.00 P01076TCDL 283.00
34.00 4.35 P01076TC4M 204.00 P01076TCDM 283.00
36.00 4.50 P01076TC4N 204.00 P01076TCDN 283.00
38.00 4.79 P01076TC4O 204.00 P01076TCDO 283.00
40.00 4.93 P01076TC4P 204.00 P01076TCDP 283.00
42.00 5.11 P01076TC4Q 204.00 P01076TCDQ 283.00
44.00 5.51 P01076TC4R 204.00 P01076TCDR 283.00
46.00 5.80 P01076TC4S 204.00 P01076TCDS 283.00
48.00 6.09 P01076TC4T 204.00 P01076TCDT 283.00
50.00 6.38 P01076TC4U 204.00 P01076TCDU 283.00
For use with Series 76T/B/V/K Valves sizes 1 HF, 1¼, 1½ and 2”.

Automatic Balancing Table B – Large Cartridges

Valve Cartridges High Pressure No.
Max ∆P 87 psi
Flow min ∆P Position 23 & 24
For use with Series 76G Valves gpm psi Victaulic Code Price Each
sizes 2½” and larger. Cartridge Type 50
16.82 1.89 P02076FC5A $747.00
17.31 1.89 P02076FC5B 747.00
17.83 1.89 P02076FC5C 747.00
18.49 1.89 P02076FC5D 747.00
19.37 1.89 P02076FC5E 747.00
20.43 2.03 P02076FC5F 747.00
21.80 2.03 P02076FC5G 747.00
23.38 2.03 P02076FC5H 747.00
25.10 2.03 P02076FC5I 747.00
27.34 2.03 P02076FC5J 747.00
28.67 2.03 P02076FC5K 747.00
31.13 2.03 P02076FC5L 747.00
34.79 2.18 P02076FC5M 747.00
39.19 2.32 P02076FC5N 747.00
45.79 2.76 P02076FC5O 747.00
50.00 3.19 P02076FC5P 747.00
55.00 3.34 P02076FC5Q 747.00
59.00 3.48 P02076FC5R 747.00
65.00 3.92 P02076FC5S 747.00
70.45 4.21 P02076FC5T 747.00
Cartridge Type 60
75.02 4.93 P02076FC6A $747.00
79.97 4.93 P02076FC6B 747.00
82.77 5.08 P02076FC6C 747.00
85.72 5.08 P02076FC6D 747.00
90.11 5.08 P02076FC6E 747.00
94.76 5.22 P02076FC6F 747.00
98.85 5.22 P02076FC6G 747.00
103.40 5.22 P02076FC6H 747.00
108.02 5.37 P02076FC6I 747.00
112.82 5.51 P02076FC6J 747.00
116.81 5.51 P02076FC6K 747.00
121.91 5.51 P02076FC6L 747.00
128.39 5.51 P02076FC6M 747.00
131.90 5.66 P02076FC6N 747.00
136.40 5.37 P02076FC6O 747.00
142.05 5.80 P02076FC6P 747.00
147.80 5.80 P02076FC6Q 747.00
153.91 5.80 P02076FC6R 747.00
160.00 6.09 P02076FC6S 747.00
165.94 6.24 P02076FC6T 747.00
170.00 6.38 P02076FC6U 747.00
180.41 6.67 P02076FC6V 747.00

Balancing Control Valves
TA Series TC – On/Off Control
Balancing Control Valves

Victaulic balancing control valves are available as an alternative to manual balancing valves when ordering a Victaulic Koil-Kit™ Coil Pack.
Contact Victaulic for details. (Koil-Kit™ Coil Pack Figure String Option: Positions 18 – 24 for the Balancing and Control Valves.)
Series TC – On/Off SERIES TC – ON/OFF CONTROL
KOIL-KIT™ Coil
Control Pack Figure String
Nominal Size Positions 18 – 23
TBV TERMINAL BALANCING AND inches Flow Actuator or 24 List Price
CONTROL VALVE NONE EGFGF0 $205.00
Refer to publication 08.38 EMO T 24V NO EGFGFNP 432.50
EMO T 24V NC EGFGFNC 432.50
SLIDER-160 EGFGFS0 499.50
SLIDER-160 I/O EGFGFSI 628.00
SLIDER-160 PLUS EGFGFSP 637.50
SLIDER-160 KNX EGFGFSK 667.00
TA ACT SP RTRN NC 24VAC EGFGFF1 567.50
Low
TA ACT SP RTRN N.O. 24VAC EGFGFF2 567.50
TA ACT SP RTRN NC 110VAC EGFGFF3 567.50
TA ACT SP RTRN N.O. 110VAC EGFGFF4 567.50
SLIDER 160 FAIL-SAFE I/O EGFGFSF 1041.50
SLIDER 160 FAIL-SAFE R24 EGFGFSR 1099.00
SLIDER 160 BACNET EGFGFSB 1347.00
SLIDER 160 CO EGFGFSC 928.00
SLIDER 160 BACNET CO EGFGFBC 1556.00
½
NONE EAFAF0 205.00
EMO T 24V NO EAFAFNP 432.50
EMO T 24V NC EAFAFNC 432.50
SLIDER-160 EAFAFS0 499.50
SLIDER-160 I/O EAFAFSI 628.00
SLIDER-160 PLUS EAFAFSP 637.50
SLIDER-160 KNX EAFAFSK 667.00
TA ACT SP RTRN NC 24VAC EAFAFF1 567.50
Nominal
TA ACT SP RTRN N.O. 24VAC EAFAFF2 567.50
TA ACT SP RTRN NC 110VAC EAFAFF3 567.50
TA ACT SP RTRN N.O. 110VAC EAFAFF4 567.50
SLIDER 160 FAIL-SAFE I/O EAFAFSF 1041.50
SLIDER 160 FAIL-SAFE R24 EAFAFSR 1099.00
SLIDER 160 BACNET EAFAFSB 1347.00
SLIDER 160 CO EAFAFSC 928.00
SLIDER 160 BACNET CO EAFAFBC 1556.00
NP – Normally Open Actuator
NC – Normally Closed Actuator

Series TC – On/Off SERIES TC – ON/OFF CONTROL
KOIL-KIT™ Coil
Control Pack Figure String
CONTROL VALVE NONE EBFBF0 $300.00
Refer to publication 08.38 EMO T 24V NO EBFBFNP 527.50
EMO T 24V NC EBFBFNC 527.50
SLIDER-160 EBFBFS0 594.50
SLIDER-160 I/O EBFBFSI 723.00
SLIDER-160 PLUS EBFBFSP 732.50
SLIDER-160 KNX EBFBFSK 762.00
TA ACT SP RTRN NC 24VAC EBFBFF1 662.50
¾ Nominal
TA ACT SP RTRN N.O. 24VAC EBFBFF2 662.50
TA ACT SP RTRN NC 110VAC EBFBFF3 662.50
TA ACT SP RTRN N.O. 110VAC EBFBFF4 662.50
SLIDER 160 FAIL-SAFE I/O EBFBFSF 1136.50
SLIDER 160 FAIL-SAFE R24 EBFBFSR 1194.00
SLIDER 160 BACNET EBFBFSB 1442.00
SLIDER 160 CO EBFBFSC 1023.00
SLIDER 160 BACNET CO EBFBFBC 1651.00
NONE ECFCF0 379.50
EMO T 24V NO ECFCFNP 607.00
EMO T 24V NC ECFCFNC 607.00
SLIDER-160 ECFCFS0 674.00
SLIDER-160 I/O ECFCFSI 802.50
SLIDER-160 PLUS ECFCFSP 812.00
SLIDER-160 KNX ECFCFSK 841.50
TA ACT SP RTRN NC 24VAC ECFCFF1 742.00
1 Nominal
TA ACT SP RTRN N.O. 24VAC ECFCFF2 742.00
TA ACT SP RTRN NC 110VAC ECFCFF3 742.00
TA ACT SP RTRN N.O. 110VAC ECFCFF4 742.00
SLIDER 160 FAIL-SAFE I/O ECFCFSF 1216.00
SLIDER 160 FAIL-SAFE R24 ECFCFSR 1273.50
SLIDER 160 BACNET ECFCFSB 1521.50
SLIDER 160 CO ECFCFSC 1102.50
SLIDER 160 BACNET CO ECFCFBC 1730.50

TA Series TCM – Modulating Control
Series TCM – SERIES TCM – MODULATING CONTROL
KOIL-KIT™ Coil
Modulating Control Pack Figure String
CONTROL VALVE NONE HGFGF0 $231.00
Refer to publication 08.38 EMO TM 24V NC HGFGF0M 528.50
EMO-3 HGFGFE3 613.50
SLIDER-160 HGFGFS0 525.50
SLIDER-160 I/O HGFGFSI 654.00
SLIDER-160 PLUS HGFGFSP 663.50
SLIDER-160 KNX HGFGFSK 693.00
Low
TA ACT MOD SP RTRN N.O. 24VAC HGFGFF6 948.00
TA ACT MOD SP RTRN NC 24VAC HGFGFF5 948.00
SLIDER 160 FAIL-SAFE I/O HGFGFSF 1067.50
SLIDER 160 FAIL-SAFE R24 HGFGFSR 1125.00
SLIDER 160 BACNET HGFGFSB 1373.00
SLIDER 160 CO HGFGFSC 954.00
SLIDER 160 BACNET CO HGFGFBC 1582.00
½
NONE HAFAF0 231.00
EMO TM 24V NC HAFAF0M 528.50
EMO-3 HAFAFE3 613.50
SLIDER-160 HAFAFS0 525.50
SLIDER 160 I/O HAFAFSI 654.00
SLIDER 160 KNX HAFAFSK 693.00
SLIDER-160 PLUS HAFAFSP 663.50
Nominal
TA ACT MOD SP RTRN N.O. 24VAC HAFAFF6 948.00
TA ACT MOD SP RTRN NC 24VAC HAFAFF5 948.00
SLIDER 160 FAIL-SAFE I/O HAFAFSF 1067.50
SLIDER 160 FAIL-SAFE R24 HAFAFSR 1125.00
SLIDER 160 BACNET HAFAFSB 1373.00
SLIDER 160 CO HAFAFSC 954.00
SLIDER 160 BACNET CO HAFAFBC 1582.00

Series TCM – SERIES TCM – MODULATING CONTROL
KOIL-KIT™ Coil
Modulating Control Pack Figure String
CONTROL VALVE NONE HBFBF0 $322.50
Refer to publication 08.38 EMO TM 24V NC HBFBF0M 620.00
EMO-3 HBFBFE3 705.00
SLIDER-160 HBFBFS0 617.00
SLIDER 160 I/O HBFBFSI 745.50
SLIDER 160 KNX HBFBFSK 784.50
SLIDER-160 PLUS HBFBFSP 755.00
¾ Nominal
TA ACT MOD SP RTRN N.O. 24VAC HBFBFF6 1039.50
TA ACT MOD SP RTRN NC 24VAC HBFBFF5 1039.50
SLIDER 160 FAIL-SAFE I/O HBFBFSF 1159.00
SLIDER 160 FAIL-SAFE R24 HBFBFSR 1216.50
SLIDER 160 BACNET HBFBFSB 1464.50
SLIDER 160 CO HBFBFSC 1045.50
SLIDER 160 BACNET CO HBFBFBC 1673.50
NONE HCFCF0 609.50
EMO TM 24V NC HCFCF0M 907.00
EMO-3 HCFCFE3 992.00
SLIDER160 HCFCFS0 904.00
SLIDER 160 I/O HCFCFSI 1032.50
SLIDER 160 KNX HCFCFSK 1071.50
SLIDER-160 PLUS HCFCFSP 1042.00
1 Nominal
TA ACT MOD SP RTRN N.O. 24VAC HCFCFF6 1326.50
TA ACT MOD SP RTRN NC 24VAC HCFCFF5 1326.50
SLIDER 160 FAIL-SAFE I/O HCFCFSF 1446.00
SLIDER 160 FAIL-SAFE R24 HCFCFSR 1503.50
SLIDER 160 BACNET HCFCFSB 1751.50
SLIDER 160 CO HCFCFSC 1332.50
SLIDER 160 BACNET CO HCFCFBC 1960.50

Tailpiece Accessories for 7CP and 7MP
Tailpiece Accessories TA SERIES 7CP, 7MP FEMALE, SWEAT, AND MALE TAILPIECE ACCESSORIES
Assembled Tailpiece
for 7CP and 7MP Nominal Size
Size Female Sweat Male
inches Victaulic Part Code Victaulic Part Code Victaulic Part Code List Price
½ P0047CPF04 P0047CPS04 P0047CTM04 $44.50
¾ P0067CPF06 P0067CPS06 P0067CTM06 63.00
1 P0107CPF10 P0107CPS10 P0107CTM10 93.50
1¼ * P0127CPF12 P0127CPS12 – 125.00
1½ ** P0147MPF14 P0147MPS14 – 159.50
2 ** P0207MPF20 P0207MPS20 – 319.50
Replacement Tailpiece Gasket
Female Sweat Male List Price
½ P0047CPGSK P0047CPGSK P0047CPGSK $6.00
¾ P0067CPGSK P0067CPGSK P0067CPGSK 6.00
1 P0107CPGSK P0107CPGSK P0107CPGSK 7.50
1¼ * P0127CPGSK P0127CPGSK – 9.00
1½ ** P0147MPGSK P0147MPGSK – 9.00
2 ** P0207MPGSK P0207MPGSK – 9.00
TA SERIES 7CP, 7MP FEMALE TAILPIECE REDUCER
Valve Size Connection Size Female Tailpiece Reducer

inches Victaulic Part Code List Price
¾ ½ P0067CPF04 $63.00
1 ¾ P0107CPF06 93.50
1¼ * 1 P0127CPF10 125.00
2 ** 1½ P0207MPF14 319.50

NOTE: Female and Sweat tailpieces are one-piece union assemblies with gasket.
* Option available for 7CP and 7MP only.
** Option available for 7MP only.

Balancing Control Valve Actuators
½ – 2” Balancing BALANCING CONTROL VALVE ACTUATORS
Koil-Kit™ Coil
Control Valve Pack Figure
Actuators Victaulic Part
String Actuator
Choice
Actuator Code Positions 23 – 24 List Price
EMO 3 – Three Point Mechanical Actuator P000TCMAE3 E3 $382.50
EMO-TM – Modulating Actuator 24VAC P000TCMANC 0M 297.50
EMO-T NC * – Normally Closed Actuator 24VAC/VDC P0000TCANC NC 227.50
EMO-T NO * – Normally Open Actuator 24VAC/VDC P0000TCANP NP 227.50
SLIDER-160 24VAC/VDC P0007MPS10 S0 294.50
SLIDER - 160 I/O 24VAC/VDC P0007MPS1I SI 423.00
SLIDER-160 PLUS 24VAC/VDC P0007MPS1P SP 432.50
TA SLIDER 160 FAIL-SAFE I/O P0007MPS1F SF 836.50
TA SLIDER 160 FAIL-SAFE R24 P0007MPS1R SR 894.00
TA SLIDER 160 BACNET P0007MPS1B SB 1142.00
TA SLIDER 160 BACNET CO P0007MPSBC BC 1351.00
TA SLIDER 160 CO P0007MPSC0 SC 723.00
TA ACT SP RTRN NC – Normally Closed 24VAC P000ACT001 F1 362.50
TA ACT SP RTRN NO – Normally Open 24VAC P000ACT002 F2 362.50
TA ACT SP RTRN NC – Normally Closed 110VAC P000ACT003 F3 362.50
TA ACT SP RTRN NO – Normally Open 110VAC P000ACT004 F4 362.50
TA ACTM NC - Normally Closed 24VAC, 0–10VDC Signal P000ACT005 F5 717.00
TA ACTM NO - Normally Open 24VAC, 0–10VDC Signal P000ACT006 F6 717.00
SLIDER 500 BACNET P0007MPS5B 5B 1522.00
SLIDER 500 P0007MPS50 50 762.00
SLIDER 500 PLUS P0007MPS5P 5P 1045.00
SLIDER 500 I/O P0007MPS5I 5I 911.50
SLIDER 500 FAILSAFE I/O P0007MPS5F 5F 1112.00
SLIDER 500 FAILSAFE R24 P0007MPS5R 5R 1239.00
* Four-minute cycle time from cold.

TA Series 7CP Compact Pressure Independent Balancing and Control Valve
TA Series 7CP
COMPACT PRESSURE INDEPENDENT
BALANCING AND CONTROL VALVE
TA SERIES 7CP
End Connection Size KOIL-KIT™ Coil

Nominal Size inches Pack Figure String
Valve Body Outlet Positions 18 – 23
inches Actuator Inlet Connection Connection or 24 List Price
EMO-3 OPFPFE3 $752.50
SLIDER 160 OPFPFS0 664.50
SLIDER 160 I/0 OPFPFSI 793.00
SLIDER 160 PLUS OPFPFSP 802.50
TA ACT SP RTRN N.C. 24VAC OPFPFF1 732.50
TA ACT SP RTRN N.O. 24VAC OPFPFF2 732.50
TA ACT SP RTRN N.C. 110VAC OPFPFF3 732.50
TA ACT SP RTRN N.O. 110VAC OPFPFF4 732.50
⅜ ½ – Female ½ – Female
EMO-TM OPFPF0M 667.50
EMO T-NC OPFPFNC 597.50
EMO-T NO OPFPFNP 597.50
SLIDER 160 FAIL-SAFE I/O OPFPFSF 1206.50
SLIDER 160 FAIL-SAFE R24 OPFPFSR 1264.00
SLIDER 160 BACNET OPFPFSB 1512.00
SLIDER 160 CO OPFPFSC 1093.00
SLIDER 160 BACNET CO OPFPFBC 1721.00
EMO 3 OGFGFE3 752.50
SLIDER-160 OGFGFS0 664.50
SLIDER-160 I/O OGFGFSI 793.00
SLIDER-160 PLUS OGFGFSP 802.50
SLIDER-160 KNX OGFGFSK 832.00
TA ACT SP RTRN N.C. 24VAC OGFGFF1 732.50
TA ACT SP RTRN N.O. 24VAC OGFGFF2 732.50
TA ACT SP RTRN N.C. 110VAC OGFGFF3 732.50
½ Low Flow TA ACT SP RTRN N.O. 110VAC ½ – Female ½ – Female OGFGFF4 732.50
SLIDER 160 FAIL-SAFE I/O OGFGFSF 1206.50
SLIDER 160 FAIL-SAFE R24 OGFGFSR 1264.00
SLIDER 160 BACNET OGFGFSB 1512.00
SLIDER 160 CO OGFGFSC 1093.00
SLIDER 160 BACNET CO OGFGFBC 1721.00
EMO TM OGFGF0M 667.50
EMO T NC OGFGFNC 597.50
EMO T NO OGFGFNP 597.50

Additional end configurations available. Contact Victaulic for details.
EMO 3 – 3 Point Mechanical Actuator
EMO TM – Modulating Actuator
EMO T NC – Normally Closed Actuator
EMO T NO – Normally Open Actuator

TA Series 7CP
TA SERIES 7CP

EMO 3 OAFAFE3 $752.50
SLIDER-160 OAFAFS0 664.50
SLIDER-160 I/O OAFAFSI 793.00
SLIDER-160 PLUS OAFAFSP 802.50
TA ACT SP RTRN N.C. 24VAC OAFAFF1 732.50
SLIDER-160 KNX OAFAFSK 832.00
TA ACT SP RTRN N.O. 24VAC OAFAFF2 732.50
TA ACT SP RTRN N.C. 110VAC OAFAFF3 732.50
½ TA ACT SP RTRN N.O. 110VAC ½ – Female ½ – Female OAFAFF4 732.50
SLIDER 160 FAIL-SAFE I/O OAFAFSF 1206.50
SLIDER 160 FAIL-SAFE R24 OAFAFSR 1264.00
SLIDER 160 BACNET OAFAFSB 1512.00
SLIDER 160 CO OAFAFSC 1093.00
SLIDER 160 BACNET CO OAFAFBC 1721.00
EMO TM OAFAF0M 667.50
EMO T NC OAFAFNC 597.50
EMO T NO OAFAFNP 597.50
EMO 3 OGMGFE3 752.50
TA ACT SP RTRN N.C. 24VAC OGMGFF1 732.50
TA ACT SP RTRN N.O. 24VAC OGMGFF2 732.50
TA ACT SP RTRN N.C. 110VAC OGMGFF3 732.50
TA ACT SP RTRN N.O. 110VAC OGMGFF4 732.50
SLIDER-160 OGMGFS0 664.50
SLIDER-160 I/O OGMGFSI 793.00
SLIDER-160 PLUS OGMGFSP 802.50
½ Low Flow SLIDER-160 KNX ½ – Male ½ – Female OGMGFSK 832.00
EMO TM OGMGF0M 667.50
EMO T NC OGMGFNC 597.50
EMO T NO OGMGFNP 597.50
SLIDER 160 FAIL-SAFE I/O OGMGFSF 1206.50
SLIDER 160 FAIL-SAFE R24 OGMGFSR 1264.00
SLIDER 160 BACNET OGMGFSB 1512.00
SLIDER 160 CO OGMGFSC 1093.00
SLIDER 160 BACNET CO OGMGFBC 1721.00


TA Series 7CP
TA SERIES 7CP

EMO 3 OAMAFE3 $752.50
TA ACT SP RTRN N.C. 24VAC OAMAFF1 732.50
TA ACT SP RTRN N.O. 24VAC OAMAFF2 732.50
TA ACT SP RTRN N.C. 110VAC OAMAFF3 732.50
TA ACT SP RTRN N.O. 110VAC OAMAFF4 732.50
SLIDER-160 OAMAFS0 664.50
SLIDER-160 I/O OAMAFSI 793.00
SLIDER-160 PLUS OAMAFSP 802.50
½ SLIDER-160 KNX ½ – Male ½ – Female OAMAFSK 832.00
EMO TM OAMAF0M 667.50
EMO T NC OAMAFNC 597.50
EMO T NO OAMAFNP 597.50
SLIDER 160 BACNET CO OAMAFBC 1721.00
SLIDER 160 CO OAMAFSC 1093.00
SLIDER 160 BACNET OAMAFSB 1512.00
SLIDER 160 FAIL-SAFE R24 OAMAFSR 1264.00
SLIDER 160 FAIL-SAFE I/O OAMAFSF 1206.50
EMO 3 OAFBFE3 845.50
TA ACT SP RTRN N.C. 24VAC OAFBFF1 825.50
TA ACT SP RTRN N.O. 24VAC OAFBFF2 825.50
TA ACT SP RTRN N.C. 110VAC OAFBFF3 825.50
TA ACT SP RTRN N.O. 110VAC OAFBFF4 825.50
SLIDER-160 OAFBFS0 757.50
SLIDER-160 I/O OAFBFSI 886.00
SLIDER-160 PLUS OAFBFSP 895.50
¾ SLIDER-160 KNX ½ – Female ¾ – Female OAFBFSK 925.00
EMO TM OAFBF0M 760.50
EMO T NC OAFBFNC 690.50
EMO T NO OAFBFNP 690.50
SLIDER 160 FAIL-SAFE I/O OAFBFSF 1299.50
SLIDER 160 FAIL-SAFE R24 OAFBFSR 1357.00
SLIDER 160 BACNET OAFBFSB 1605.00
SLIDER 160 CO OAFBFSC 1186.00
SLIDER 160 BACNET CO OAFBFBC 1814.00


TA Series 7CP
TA SERIES 7CP

EMO 3 OBFBFE3 $845.50
TA ACT SP RTRN N.C. 24VAC OBFBFF1 825.50
TA ACT SP RTRN N.O. 24VAC OBFBFF2 825.50
TA ACT SP RTRN N.C. 110VAC OBFBFF3 825.50
TA ACT SP RTRN N.O. 110VAC OBFBFF4 825.50
SLIDER-160 OBFBFS0 757.50
SLIDER-160 I/O OBFBFSI 886.00
SLIDER-160 PLUS OBFBFSP 895.50
SLIDER-160 KNX ¾ – Female ¾ – Female OBFBFSK 925.00
EMO TM OBFBF0M 760.50
EMO T NC OBFBFNC 690.50
EMO T NO OBFBFNP 690.50
SLIDER 160 FAIL-SAFE I/O OBFBFSF 1299.50
SLIDER 160 FAIL-SAFE R24 OBFBFSR 1357.00
SLIDER 160 BACNET OBFBFSB 1605.00
SLIDER 160 CO OBFBFSC 1186.00
SLIDER 160 BACNET CO OBFBFBC 1814.00
¾
EMO 3 OBMBFE3 845.50
TA ACT SP RTRN N.C. 24VAC OBMBFF1 825.50
TA ACT SP RTRN N.O. 24VAC OBMBFF2 825.50
TA ACT SP RTRN N.C. 110VAC OBMBFF3 825.50
TA ACT SP RTRN N.O. 110VAC OBMBFF4 825.50
SLIDER-160 OBMBFS0 757.50
SLIDER-160 I/O OBMBFSI 886.00
SLIDER-160 PLUS OBMBFSP 895.50
SLIDER-160 KNX ¾ – Male ¾ – Female OBMBFSK 925.00
EMO TM OBMBF0M 760.50
EMO T NC OBMBFNC 690.50
EMO T NO OBMBFNP 690.50
SLIDER 160 FAIL-SAFE I/O OBMBFSF 1299.50
SLIDER 160 FAIL-SAFE R24 OBMBFSR 1357.00
SLIDER 160 BACNET OBMBFSB 1605.00
SLIDER 160 CO OBMBFSC 1186.00
SLIDER 160 BACNET CO OBMBFBC 1814.00


TA Series 7CP
TA SERIES 7CP

EMO 3 OBFCFE3 $951.50
TA ACT SP RTRN N.C. 24VAC OBFCFF1 931.50
TA ACT SP RTRN N.O. 24VAC OBFCFF2 931.50
TA ACT SP RTRN N.C. 110VAC OBFCFF3 931.50
TA ACT SP RTRN N.O. 110VAC OBFCFF4 931.50
SLIDER-160 OBFCFS0 863.50
SLIDER-160 I/O OBFCFSI 992.00
SLIDER-160 PLUS OBFCFSP 1001.50
SLIDER-160 KNX ¾ – Female 1 – Female OBFCFSK 1031.00
EMO TM OBFCF0M 866.50
EMO T NC OBFCFNC 796.50
EMO T NO OBFCFNP 796.50
SLIDER 160 FAIL-SAFE I/O OBFCFSF 1405.50
SLIDER 160 FAIL-SAFE R24 OBFCFSR 1463.00
SLIDER 160 BACNET OBFCFSB 1711.00
SLIDER 160 CO OBFCFSC 1292.00
SLIDER 160 BACNET CO OBFCFBC 1920.00
1
EMO 3 OCFCFE3 951.50
TA ACT SP RTRN N.C. 24VAC OCFCFF1 931.50
TA ACT SP RTRN N.O. 24VAC OCFCFF2 931.50
TA ACT SP RTRN N.C. 110VAC OCFCFF3 931.50
TA ACT SP RTRN N.O. 110VAC OCFCFF4 931.50
SLIDER-160 OCFCFS0 863.50
SLIDER-160 I/O OCFCFSI 992.00
SLIDER-160 PLUS OCFCFSP 1001.50
SLIDER-160 KNX 1 – Female 1 – Female OCFCFSK 1031.00
EMO TM OCFCF0M 866.50
EMO T NC OCFCFNC 796.50
EMO T NO OCFCFNP 796.50
SLIDER 160 FAIL-SAFE I/O OCFCFSF 1405.50
SLIDER 160 FAIL-SAFE R24 OCFCFSR 1463.00
SLIDER 160 BACNET OCFCFSB 1711.00
SLIDER 160 CO OCFCFSC 1292.00
SLIDER 160 BACNET CO OCFCFBC 1920.00


TA Series 7CP
TA SERIES 7CP

EMO 3 OCMCFE3 $951.50
TA ACT SP RTRN N.C. 24VAC OCMCFF1 931.50
TA ACT SP RTRN N.O. 24VAC OCMCFF2 931.50
TA ACT SP RTRN N.C. 110VAC OCMCFF3 931.50
TA ACT SP RTRN N.O. 110VAC OCMCFF4 931.50
SLIDER-160 OCMCFS0 863.50
SLIDER-160 I/O OCMCFSI 992.00
SLIDER-160 PLUS OCMCFSP 1001.50
1 SLIDER-160 KNX 1 – Male 1 – Female OCMCFSK 1031.00
EMO TM OCMCF0M 866.50
EMO T NC OCMCFNC 796.50
EMO T NO OCMCFNP 796.50
SLIDER 160 FAIL-SAFE I/O OCMCFSF 1405.50
SLIDER 160 FAIL-SAFE R24 OCMCFSR 1463.00
SLIDER 160 BACNET OCMCFSB 1711.00
SLIDER 160 CO OCMCFSC 1292.00
SLIDER 160 BACNET CO OCMCFBC 1920.00
EMO 3 OCFDFE3 1178.50
TA ACT SP RTRN N.C. 24VAC OCFDFF1 1158.50
TA ACT SP RTRN N.O. 24VAC OCFDFF2 1158.50
TA ACT SP RTRN N.C. 110VAC OCFDFF3 1158.50
TA ACT SP RTRN N.O. 110VAC OCFDFF4 1158.50
SLIDER-160 OCFDFS0 1090.50
SLIDER-160 I/O OCFDFSI 1219.00
SLIDER-160 PLUS OCFDFSP 1228.50
1¼ SLIDER-160 KNX 1 – Female 1¼ – Female OCFDFSK 1258.00
EMO TM OCFDF0M 1093.50
EMO T NC OCFDFNC 1023.50
EMO T NO OCFDFNP 1023.50
SLIDER 160 FAIL-SAFE I/O OCFDFSF 1632.50
SLIDER 160 FAIL-SAFE R24 OCFDFSR 1690.00
SLIDER 160 BACNET OCFDFSB 1938.00
SLIDER 160 CO OCFDFSC 1519.00
SLIDER 160 BACNET CO OCFDFBC 2147.00


TA Series 7CP
TA SERIES 7CP

EMO 3 ODFDFE3 $1178.50
TA ACT SP RTRN N.C. 24VAC ODFDFF1 1158.50
TA ACT SP RTRN N.O. 24VAC ODFDFF2 1158.50
TA ACT SP RTRN N.C. 110VAC ODFDFF3 1158.50
TA ACT SP RTRN N.O. 110VAC ODFDFF4 1158.50
SLIDER-160 ODFDFS0 1090.50
SLIDER-160 I/O ODFDFSI 1219.00
SLIDER-160 PLUS ODFDFSP 1228.50
1¼ SLIDER-160 KNX 1¼ – Female 1¼ – Female ODFDFSK 1258.00
EMO TM ODFDF0M 1093.50
EMO T NC ODFDFNC 1023.50
EMO T NO ODFDFNP 1023.50
SLIDER 160 FAIL-SAFE I/O ODFDFSF 1632.50
SLIDER 160 FAIL-SAFE R24 ODFDFSR 1690.00
SLIDER 160 BACNET ODFDFSB 1938.00
SLIDER 160 CO ODFDFSC 1519.00
SLIDER 160 BACNET CO ODFDFBC 2147.00


TA Series 7MP – Brass Pressure Independent Balancing and Modulating Control Valve
TA Series 7MP
PRESSURE INDEPENDENT BALANCING AND
MODULATING CONTROL VALVE
TA SERIES 7MP – BRASS
Koil-Kit Coil Pack

Figure String
End Connection Size Positions 18 – 23
Nominal Size inches or 24
Valve Body Outlet
inches Actuator Inlet Connection Connection Modulator Code List Price
EMO-TM 8AFAF0M $702.00
SLIDER-160 8AFAFS0 699.00
SLIDER-160 I/O 8AFAFSI 827.50
SLIDER-160 PLUS 8AFAFSP 837.00
SLIDER-160 KNX 8AFAFSK 866.50
½ – Female ½ – Female
SLIDER 160 FAIL-SAFE I/O 8AFAFSF 1241.00
SLIDER 160 FAIL-SAFE R24 8AFAFSR 1298.50
SLIDER 160 BACNET 8AFAFSB 1546.50
SLIDER 160 CO 8AFAFSC 1127.50
SLIDER 160 BACNET CO 8AFAFBC 1755.50
½
EMO-TM 8AMAF0M 702.00
SLIDER-160 8AMAFS0 699.00
SLIDER-160 I/O 8AMAFSI 827.50
SLIDER-160 PLUS 8AMAFSP 837.00
SLIDER-160 KNX 8AMAFSK 866.50
½ – Male ½ – Female
SLIDER 160 FAIL-SAFE I/O 8AMAFSF 1241.00
SLIDER 160 FAIL-SAFE R24 8AMAFSR 1298.50
SLIDER 160 BACNET 8AMAFSB 1546.50
SLIDER 160 CO 8AMAFSC 1127.50
SLIDER 160 BACNET CO 8AMAFBC 1755.50
EMO-TM 8AFBF0M 797.00
SLIDER-160 8AFBFS0 794.00
SLIDER-160 I/O 8AFBFSI 922.50
SLIDER-160 PLUS 8AFBFSP 932.00
SLIDER-160 KNX 8AFBFSK 961.50
¾ ½ – Female ¾ – Female
SLIDER 160 FAIL-SAFE I/O 8AFBFSF 1336.00
SLIDER 160 FAIL-SAFE R24 8AFBFSR 1393.50
SLIDER 160 BACNET 8AFBFSB 1641.50
SLIDER 160 CO 8AFBFSC 1222.50
SLIDER 160 BACNET CO 8AFBFBC 1850.50


TA Series 7MP
Koil-Kit Coil Pack

Figure String
Valve Body Outlet
EMO-TM 8BFBF0M $797.00
SLIDER-160 8BFBFS0 794.00
SLIDER-160 I/O 8BFBFSI 922.50
SLIDER-160 PLUS 8BFBFSP 932.00
SLIDER-160 KNX 8BFBFSK 961.50
¾ – Female ¾ – Female
SLIDER 160 FAIL-SAFE I/O 8BFBFSF 1336.00
SLIDER 160 FAIL-SAFE R24 8BFBFSR 1393.50
SLIDER 160 BACNET 8BFBFSB 1641.50
SLIDER 160 CO 8BFBFSC 1222.50
SLIDER 160 BACNET CO 8BFBFBC 1850.50
¾
EMO-TM 8BMBF0M 797.00
SLIDER-160 8BMBFS0 794.00
SLIDER-160 I/O 8BMBFSI 922.50
SLIDER-160 PLUS 8BMBFSP 932.00
SLIDER-160 KNX 8BMBFSK 961.50
¾ – Male ¾ – Female
SLIDER 160 FAIL-SAFE I/O 8BMBFSF 1336.00
SLIDER 160 FAIL-SAFE R24 8BMBFSR 1393.50
SLIDER 160 BACNET 8BMBFSB 1641.50
SLIDER 160 CO 8BMBFSF 1336.00
SLIDER 160 BACNET CO 8BMBFBC 1850.50
SLIDER-160 8BFCFS0 956.50
SLIDER-160 PLUS 8BFCFSP 1094.50
SLIDER-160 KNX 8BFCFSK 1124.00
SLIDER 160 FAIL-SAFE I/O 8BFCFSF 1498.50
1 ¾ – Female 1 – Female
SLIDER 160 FAIL-SAFE R24 8BFCFSR 1556.00
SLIDER 160 BACNET 8BFCFSB 1804.00
SLIDER 160 CO 8BFCFSC 1385.00
SLIDER 160 BACNET CO 8BFCFBC 2013.00


TA Series 7MP
Koil-Kit Coil Pack

Figure String
Valve Body Outlet
SLIDER-160 8CFCFS0 $956.50
SLIDER-160 I/O 8CFCFSI 1085.00
SLIDER-160 PLUS 8CFCFSP 1094.50
SLIDER-160 KNX 8CFCFSK 1124.00
SLIDER 160 FAIL-SAFE I/O 1 – Female 1 – Female 8CFCFSF 1498.50
SLIDER 160 FAIL-SAFE R24 8CFCFSR 1556.00
SLIDER 160 BACNET 8CFCFSB 1804.00
SLIDER 160 CO 8CFCFSC 1385.00
SLIDER 160 BACNET CO 8CFCFBC 2013.00
1
SLIDER-160 8CMCFS0 956.50
SLIDER-160 I/O 8CMCFSI 1085.00
SLIDER-160 PLUS 8CMCFSP 1094.50
SLIDER-160 KNX 8CMCFSK 1124.00
SLIDER 160 FAIL-SAFE I/O 1 – Male 1 – Female 8CMCFSF 1498.50
SLIDER 160 FAIL-SAFE R24 8CMCFSR 1556.00
SLIDER 160 BACNET 8CMCFSB 1804.00
SLIDER 160 CO 8CMCFSC 1385.00
SLIDER 160 BACNET CO 8CMCFBC 2013.00
SLIDER-160 8CFDFS0 1291.50
SLIDER-160 I/O 8CFDFSI 1420.00
SLIDER-160 PLUS 8CFDFSP 1429.50
SLIDER-160 KNX 8CFDFSK 1459.00
SLIDER 160 FAIL-SAFE I/O 1 – Female 1¼ – Female 8CFDFSF 1833.50
SLIDER 160 FAIL-SAFE R24 8CFDFSR 1891.00
SLIDER 160 BACNET 8CFDFSB 2139.00
SLIDER 160 CO 8CFDFSC 1720.00
SLIDER 160 BACNET CO 8CFDFBC 2348.00
1¼
SLIDER-160 8DFDFS0 1291.50
SLIDER-160 I\O 8DFDFSI 1420.00
SLIDER-160 PLUS 8DFDFSP 1429.50
SLIDER-160 KNX 8DFDFSK 1459.00
SLIDER 160 FAIL-SAFE I/O 1¼ – Female 1¼ – Female 8DFDFSF 1833.50
SLIDER 160 FAIL-SAFE R24 8DFDFSR 1891.00
SLIDER 160 BACNET 8DFDFSB 2139.00
SLIDER 160 CO 8DFDFSC 1720.00
SLIDER 160 BACNET CO 8DFDFBC 2348.00


TA Series 7MP
Koil-Kit Coil Pack

Figure String
Valve Body Outlet
SLIDER-500 8EFEF50 $2533.00
SLIDER-500 I/O 8EFEF5I 2682.50
SLIDER-500 PLUS 8EFEF5P 2816.00
1½ – Female 1½ – Female
SLIDER 500 BACNET 8FFFF5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FFFF5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FFFF5R 3448.50
SLIDER 500 BACNET 8FFFS5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FFFS5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FFFS5R 3448.50
1½ – Female 1½ – Sweat
SLIDER-500 8EFES50 2533.00
SLIDER-500 I/O 8EFES5I 2682.50
SLIDER-500 PLUS 8EFES5P 2816.00
1½
SLIDER 500 BACNET 8FSFS5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FSFS5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FSFS5R 3448.50
1½ – Sweat 1½ – Sweat
SLIDER-500 8ESES50 2533.00
SLIDER-500 I/O 8ESES5I 2682.50
SLIDER-500 PLUS 8ESES5P 2816.00
SLIDER-500 8ESEF50 2533.00
SLIDER-500 I/O 8ESEF5I 2682.50
SLIDER-500 PLUS 8ESEF5P 2816.00
1½ – Sweat 1½ – Female
SLIDER 500 BACNET 8FSFF5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FSFF5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FSFF5R 3448.50
SLIDER-500 8FFFF50 2971.50
SLIDER-500 I/O 8FFFF5I 3121.00
SLIDER-500 PLUS 8FFFF5P 3254.50
2 – Female 2 – Female
SLIDER 500 BACNET 8FFFF5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FFFF5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FFFF5R 3448.50
2
SLIDER-500 8FFFS50 2971.50
SLIDER-500 I/O 8FFFS5I 3121.00
SLIDER-500 PLUS 8FFFS5P 3254.50
2 – Female 2 – Sweat
SLIDER 500 BACNET 8FFFS5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FFFS5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FFFS5R 3448.50


TA Series 7MP
Koil-Kit Coil Pack

Figure String
Valve Body Outlet
SLIDER-500 8FSFS50 $2971.50
SLIDER-500 I/O 8FSFS5I 3121.00
SLIDER-500 PLUS 8FSFS5P 3254.50
2 – Sweat 2 – Sweat
SLIDER 500 BACNET 8FSFS5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FSFS5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FSFS5R 3448.50
SLIDER-500 8FSFF50 2971.50
SLIDER-500 I/O 8FSFF5I 3121.00
SLIDER-500 PLUS 8FSFF5P 3254.50
2 – Sweat 2 – Female
SLIDER 500 BACNET 8FSFF5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8FSFF5F 3321.50
SLIDER 500 FAIL-SAFE R24 8FSFF5R 3448.50
2
SLIDER-500 8EFFF50 2971.50
SLIDER-500 I/O 8EFFF5I 3121.00
SLIDER-500 PLUS 8EFFF5P 3254.50
1½ – Female 2 – Female
SLIDER 500 BACNET 8EFFF5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8EFFF5F 3321.50
SLIDER 500 FAIL-SAFE R24 8EFFF5R 3448.50
SLIDER-500 8EFFS50 2971.50
SLIDER-500 I/O 8EFFS5I 3121.00
SLIDER-500 PLUS 8EFFS5P 3254.50
1½ – Female 2 – Sweat
SLIDER 500 BACNET 8EFFS5B 3731.50
SLIDER 500 FAIL-SAFE I/O 8EFFS5F 3321.50
SLIDER 500 FAIL-SAFE R24 8EFFS5R 3448.50
EMO-TM 81F1F0M 797.00
SLIDER-160 81F1FS0 794.00
SLIDER-160 I/O 81F1FSI 922.50
SLIDER-160 PLUS 81F1FSP 932.00
½ HF – SLIDER-160 KNX 81F1FSK 961.50
uses ¾” ½ – Female ½ – Female
body SLIDER 160 FAIL-SAFE I/O 81F1FSF 1336.00
SLIDER 160 FAIL-SAFE R24 81F1FSR 1393.50
SLIDER 160 BACNET 81F1FSB 1641.50
SLIDER 160 CO 81F1FSC 1222.50
SLIDER 160 BACNET CO 81F1FBC 1850.50


TA Series 7MP
Koil-Kit Coil Pack

Figure String
Valve Body Outlet
SLIDER-160 82F2FS0 $956.50
¾ HF – SLIDER-160 KNX 82F2FSK 1124.00
uses 1” SLIDER 160 FAIL-SAFE I/O ¾ – Female ¾ – Female 82F2FSF 1498.50
body SLIDER 160 FAIL-SAFE R24 82F2FSR 1556.00
SLIDER-160 83F3FS0 1291.50
1 HF – SLIDER-160 KNX 83F3FSK 1459.00
uses 1¼” SLIDER 160 FAIL-SAFE I/O 1 – Female 1 – Female 83F3FSF 1833.50
body SLIDER 160 FAIL-SAFE R24 83F3FSR 1891.00


TA Series 7MP – High Pressure Independent Balancing and Modulating Control Valve
TA Series 7MP – High Pressure

TA SERIES 7MP HIGH DELTA P
Koil-Kit Coil Pack

Figure String
Inlet Connection Valve Body Outlet
inches Actuator Connection Modulator Code List Price
EMO-TM 9AFAF0M $777.50
SLIDER-160 9AFAFS0 774.50
SLIDER-160 I/O 9AFAFSI 903.00
SLIDER-160 PLUS 9AFAFSP 912.50
SLIDER-160 KNX 9AFAFSK 942.00
SLIDER 160 FAIL-SAFE I/O 9AFAFSF 1316.50
SLIDER 160 FAIL-SAFE R24 9AFAFSR 1374.00
SLIDER 160 BACNET 9AFAFSB 1622.00
SLIDER 160 CO 9AFAFSC 1203.00
½ High SLIDER 160 BACNET CO 9AFAFBC 1831.00
Delta P EMO-TM 9AMAF0M 777.50
SLIDER-160 9AMAFS0 774.50
SLIDER-160 I/O 9AMAFSI 903.00
SLIDER-160 PLUS 9AMAFSP 912.50
SLIDER-160 KNX 9AMAFSK 942.00
½ – Male ½ – Female
SLIDER 160 FAIL-SAFE I/O 9AMAFSF 1316.50
SLIDER 160 FAIL-SAFE R24 9AMAFSR 1374.00
SLIDER 160 BACNET 9AMAFSB 1622.00
SLIDER 160 CO 9AMAFSC 1203.00
SLIDER 160 BACNET CO 9AMAFBC 1831.00
EMO-TM 9AFBF0M 886.50
SLIDER-160 9AFBFS0 883.50
SLIDER-160 I/O 9AFBFSI 1012.00
SLIDER-160 PLUS 9AFBFSP 1021.50
¾ High SLIDER-160 KNX 9AFBFSK 1051.00
½ – Female ¾ – Female
Delta P SLIDER 160 FAIL-SAFE I/O 9AFBFSF 1425.50
SLIDER 160 FAIL-SAFE R24 9AFBFSR 1483.00
SLIDER 160 BACNET 9AFBFSB 1731.00
SLIDER 160 CO 9AFBFSC 1312.00
SLIDER 160 BACNET CO 9AFBFBC 1940.00



Koil-Kit Coil Pack

Figure String
Valve Body Outlet
EMO-TM 9BFBF0M $886.50
SLIDER-160 9BFBFS0 883.50
SLIDER-160 I/O 9BFBFSI 1012.00
SLIDER-160 PLUS 9BFBFSP 1021.50
SLIDER-160 KNX 9BFBFSK 1051.00
¾ – Female ¾ – Female
SLIDER 160 FAIL-SAFE I/O 9BFBFSF 1425.50
SLIDER 160 FAIL-SAFE R24 9BFBFSR 1483.00
SLIDER 160 BACNET 9BFBFSB 1731.00
SLIDER 160 CO 9BFBFSC 1312.00
SLIDER 160 BACNET CO 9BFBFBC 1940.00
¾ High Delta P
EMO-TM 9BMBF0M 886.50
SLIDER-160 9BMBFS0 883.50
SLIDER-160 I/O 9BMBFSI 1012.00
SLIDER-160 PLUS 9BMBFSP 1021.50
SLIDER-160 KNX 9BMBFSK 1051.00
¾ – Male ¾ – Female
SLIDER 160 FAIL-SAFE I/O 9BMBFSF 1425.50
SLIDER 160 FAIL-SAFE R24 9BMBFSR 1483.00
SLIDER 160 BACNET 9BMBFSB 1731.00
SLIDER 160 CO 9BMBFSC 1312.00
SLIDER 160 BACNET CO 9BMBFBC 1940.00
SLIDER-160 9BFCFS0 1072.00
SLIDER-160 I/O 9BFCFSI 1200.50
SLIDER-160 PLUS 9BFCFSP 1210.00
SLIDER-160 KNX 9BFCFSK 1239.50
1 SLIDER 160 FAIL-SAFE I/O ¾ – Female 1 – Female 9BFCFSF 1614.00
SLIDER 160 FAIL-SAFE R24 9BFCFSR 1671.50
SLIDER 160 BACNET 9BFCFSB 1919.50
SLIDER 160 CO 9BFCFSC 1500.50
SLIDER 160 BACNET CO 9BFCFBC 2128.50



Koil-Kit Coil Pack

Figure String
Valve Body Outlet
SLIDER-160 9CFCFS0 $1072.00
SLIDER-160 I/O 9CFCFSI 1200.50
SLIDER-160 PLUS 9CFCFSP 1210.00
SLIDER-160 KNX 9CFCFSK 1239.50
SLIDER 160 FAIL-SAFE I/O 1 – Female 1 – Female 9CFCFSF 1614.00
SLIDER 160 FAIL-SAFE R24 9CFCFSR 1671.50
SLIDER 160 BACNET 9CFCFSB 1919.50
SLIDER 160 CO 9CFCFSC 1500.50
SLIDER 160 BACNET CO 9CFCFBC 2128.50
1
SLIDER-160 9CMCFS0 1072.00
SLIDER-160 I/O 9CMCFSI 1200.50
SLIDER-160 PLUS 9CMCFSP 1210.00
SLIDER-160 KNX 9CMCFSK 1239.50
SLIDER 160 FAIL-SAFE I/O 1 – Male 1 – Female 9CMCFSF 1614.00
SLIDER 160 FAIL-SAFE R24 9CMCFSR 1671.50
SLIDER 160 BACNET 9CMCFSB 1919.50
SLIDER 160 CO 9CMCFSC 1500.50
SLIDER 160 BACNET CO 9CMCFBC 2128.50
EMO-TM 91F1F0M 886.50
SLIDER-160 91F1FS0 883.50
½ High
Delta P HF – SLIDER-160 PLUS 91F1FSP 1021.50
uses ¾” SLIDER-160 KNX 91F1FSK 1051.00
High SLIDER 160 FAIL-SAFE I/O 91F1FSF 1425.50
Delta P
SLIDER 160 FAIL-SAFE R24 91F1FSR 1483.00
body
SLIDER-160 92F2FS0 1072.00
¾ High Delta P
HF – SLIDER-160 KNX 92F2FSK 1239.50
uses 1” SLIDER 160 FAIL-SAFE I/O ¾ – Female ¾ – Female 92F2FSF 1614.00
High Delta P SLIDER 160 FAIL-SAFE R24 92F2FSR 1671.50
body


TA Series 7MP – Ductile Iron Pressure Independent Balancing and Modulating Control Valve
TA Series 7MP
Sizes 2½ – 3” – Ductile Iron
TA SERIES 7MP – DUCTILE IRON
Nominal Size
inches
2½ 3
Actuator Victaulic Victaulic
Code Option Description Part Code List Price Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0247MP070 $4741.50 V0307MP070 $5362.50
8A SL750/24 Adv, 3-pt-24 VAC/VDC-w/o opt board V0247MP08A 5038.00 V0307MP08A 5659.00
8B SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP V0247MP08B 5263.50 V0307MP08B 5884.50
8C SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485 V0247MP08C 5313.00 V0307MP08C 5934.00
8D SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485 V0247MP08D 5299.50 V0307MP08D 5920.50
8E SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP V0247MP08E 5223.00 V0307MP08E 5844.00
8F SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP V0247MP08F 5223.00 V0307MP08F 5844.00
8G SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP V0247MP08G 5223.00 V0307MP08G 5844.00
8I SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP+Rly V0247MP08I 5329.00 V0307MP08I 5950.00
8J SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0247MP08J 5366.50 V0307MP08J 5987.50
8K SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0247MP08K 5366.50 V0307MP08K 5987.50
8L SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0247MP08L 5290.50 V0307MP08L 5911.50
8M SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP+Rly V0247MP08M 5290.50 V0307MP08M 5911.50
8N SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0247MP08N 5290.50 V0307MP08N 5911.50
G0 SL750/HV Std, 3-pt-115/230 VAC V0247MP0G0 5110.50 V0307MP0G0 5731.50
HA SL750/HV Adv, 3-pt-115/230 VAC-w/o opt board V0247MP0HA 5407.50 V0307MP0HA 6028.50
HB SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP V0247MP0HB 5631.50 V0307MP0HB 6252.50
HC SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485 V0247MP0HC 5681.00 V0307MP0HC 6302.00
HD SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485 V0247MP0HD 5669.50 V0307MP0HD 6290.50
HE SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP V0247MP0HE 5593.00 V0307MP0HE 6214.00
HF SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP V0247MP0HF 5593.00 V0307MP0HF 6214.00
HG SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP V0247MP0HG 5593.00 V0307MP0HG 6214.00
HI SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP+Rly V0247MP0HI 5700.00 V0307MP0HI 6321.00
HJ SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485+Rly V0247MP0HJ 5736.00 V0307MP0HJ 6357.00
HK SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485+Rly V0247MP0HK 5736.00 V0307MP0HK 6357.00
HL SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP+Rly V0247MP0HL 5658.50 V0307MP0HL 6279.50
HM SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP+Rly V0247MP0HM 5658.50 V0307MP0HM 6279.50
HN SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP+Rly V0247MP0HN 5658.50 V0307MP0HN 6279.50
MS TA-MC100 FSE 24V AC/DC -010Vinput 4-20mA, 3-pt V0247MP0MS 7226.50 V0307MP0MS 7847.50
MT TA-MC100 FSR 24V AC/DC -010Vinput 4-20mA, 3-pt V0247MP0MT 7226.50 V0307MP0MT 7847.50
7F SL750/24 Fail-Safe, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0247MP07F 6231.00 V0307MP07F 6852.00
7R SL750 /HV Fail-Safe w/Relay, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0247MP07R 6722.00 V0307MP07R 7343.00

TA Series 7MP and Actuator

Sizes 4 – 5” – Ductile Iron
TA SERIES 7MP – DUCTILE IRON
Nominal Size
inches
4 5
Actuator Victaulic Victaulic
Code Option Description Part Code List Price Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0407MP070 $13349.50 V0507MP070 $20805.00
8A SL750/24 Adv, 3-pt-24 VAC/VDC-w/o opt board V0407MP08A 13646.00 V0507MP08A 21101.50
8B SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP V0407MP08B 13871.50 V0507MP08B 21327.00
8C SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485 V0407MP08C 13921.00 V0507MP08C 21376.50
8D SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485 V0407MP08D 13907.50 V0507MP08D 21363.00
8E SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP V0407MP08E 13831.00 V0507MP08E 21286.50
8F SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP V0407MP08F 13831.00 V0507MP08F 21286.50
8G SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP V0407MP08G 13831.00 V0507MP08G 21286.50
8H SL750/24 Adv, 3-pt-24 VAC/VDC-Rly V0407MP08H 13783.00 V0507MP08H 21238.50
8I SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-TP+Rly V0407MP08I 13937.00 V0507MP08I 21392.50
8J SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0407MP08J 13974.50 V0507MP08J 21430.00
8K SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0407MP08K 13974.50 V0507MP08K 21430.00
8L SL750/24 Adv, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0407MP08L 13898.50 V0507MP08L 21354.00
8M SL750/24 Adv, 3-pt-24 VAC/VDC-KNX-IP+Rly V0407MP08M 13898.50 V0507MP08M 21354.00
8N SL750/24 Adv, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0407MP08N 13898.50 V0507MP08N 21354.00
G0 SL750/HV Std, 3-pt-115/230 VAC V0407MP0G0 13718.50 V0507MP0G0 21174.00
HA SL750/HV Adv, 3-pt-115/230 VAC-w/o opt board V0407MP0HA 14015.50 V0507MP0HA 21471.00
HB SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP V0407MP0HB 14239.50 V0507MP0HB 21695.00
HC SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485 V0407MP0HC 14289.00 V0507MP0HC 21744.50
HD SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485 V0407MP0HD 14277.50 V0507MP0HD 21733.00
HE SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP V0407MP0HE 14201.00 V0507MP0HE 21656.50
HF SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP V0407MP0HF 14201.00 V0507MP0HF 21656.50
HG SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP V0407MP0HG 14201.00 V0507MP0HG 21656.50
HH SL750/HV Adv, 3-pt-115/230 VAC-Rly V0407MP0HH 14152.50 V0507MP0HH 21608.00
HI SL750/HV Adv, 3-pt-115/230 VAC-KNX-TP+Rly V0407MP0HI 14308.00 V0507MP0HI 21763.50
HJ SL750/HV Adv, 3-pt-115/230 VAC-Modbus RS485+Rly V0407MP0HJ 14344.00 V0507MP0HJ 21799.50
HK SL750/HV Adv, 3-pt-115/230 VAC-BACnet RS-485+Rly V0407MP0HK 14344.00 V0507MP0HK 21799.50
HL SL750/HV Adv, 3-pt-115/230 VAC-Modbus/TCP+Rly V0407MP0HL 14266.50 V0507MP0HL 21722.00
HM SL750/HV Adv, 3-pt-115/230 VAC-KNX-IP+Rly V0407MP0HM 14266.50 V0507MP0HM 21722.00
HN SL750/HV Adv, 3-pt-115/230 VAC-BACnet/IP+Rly V0407MP0HN 14266.50 V0507MP0HN 21722.00
MS TA-MC100 FSE 24V AC/DC -010Vinput 4-20mA, 3-pt V0407MP0MS 15834.50 V0507MP0MS 23290.00
MT TA-MC100 FSR 24V AC/DC -010Vinput 4-20mA, 3-pt V0407MP0MT 15834.50 V0507MP0MT 23290.00
7F SL750/24 Fail-Safe, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0407MP07F 14839.00 V0507MP07F 22294.50
7R SL750 /HV Fail-Safe w/Relay, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0407MP07R 15330.00 V0507MP07R 22785.50


Size 4” High Flow (HF) –
Ductile Iron
TA SERIES 7MP HIGH FLOW – DUCTILE IRON
Nominal Size
inches
Actuator 4 HF
Code Supply Victaulic
Option Voltage Input Signal Options Part Code List Price
50 24 VAC/VDC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0407MPH50 $16082.00
E0 100-240 VAC SL1250/ 0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0407MPHE0 16452.00
6A 24 VAC/VDC SL1250/With binary input, relays, mA output V0407MPH6A 16377.50
FA 100-240 VAC SL1250/With binary input, relays, mA output V0407MPHFA 16747.50
6B 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0407MPH6B 16604.50
6C 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0407MPH6C 16654.00
6D 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0407MPH6D 16641.50
6E 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6E 16563.50
6F 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6F 16563.50
6G 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPH6G 16563.50
FB 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0407MPHFB 16973.50
FC 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0407MPHFC 17023.50
FD 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0407MPHFD 17008.50
FE 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFE 16934.00
FF 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFF 16934.00
FG 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0407MPHFG 16934.00
6I 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0407MPH6I 16671.00
6J 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0407MPH6J 16706.00
6K 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0407MPH6K 16706.00
6L 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6L 16631.50
6M 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6M 16631.50
6N 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPH6N 16631.50
FI 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0407MPHFI 17039.00
FJ 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0407MPHFJ 17076.50
FK 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0407MPHFK 17076.50
FL 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFL 16999.50
FM 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFM 16999.50
FN 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0407MPHFN 16999.50
MS – TA-MC100 FSE V0407MPHMS 18423.50
MT – TA-MC100 FSR V0407MPHMT 18423.50
2F 24VAC/VDC SL1250/24 Fail-Safe, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0407MPH2F 17751.50
2R 100-240 VAC SL1250 /HV Fail-Safe w/Relay, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0407MPH2R 18306.50


Size 5” High Flow (HF) –
Ductile Iron
TA SERIES 7MP HIGH FLOW – DUCTILE IRON
Nominal Size
inches
Actuator 5 HF
Code Supply Victaulic
Option Voltage Input Signal Options Part Code List Price
50 24 VAC/VDC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0507MPH50 $25191.50
E0 100-240 VAC SL1250/0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off V0507MPHE0 25561.50
6A 24 VAC/VDC SL1250/With binary input, relays, mA output V0507MPH6A 25487.00
FA 100-240 VAC SL1250/With binary input, relays, mA output V0507MPHFA 25857.00
6B 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0507MPH6B 25714.00
6C 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0507MPH6C 25763.50
6D 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0507MPH6D 25751.00
6E 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6E 25673.00
6F 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6F 25673.00
6G 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPH6G 25673.00
FB 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (without binary input, relays, mA output) V0507MPHFB 26083.00
FC 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (without binary input, relays, mA output) V0507MPHFC 26133.00
FD 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (without binary input, relays, mA output) V0507MPHFD 26118.00
FE 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFE 26043.50
FF 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFF 26043.50
FG 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (without binary input, relays, mA output) V0507MPHFG 26043.50
6I 24 VAC/VDC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0507MPH6I 25780.50
6J 24 VAC/VDC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0507MPH6J 25815.50
6K 24 VAC/VDC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0507MPH6K 25815.50
6L 24 VAC/VDC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6L 25741.00
6M 24 VAC/VDC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6M 25741.00
6N 24 VAC/VDC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPH6N 25741.00
FI 100-240 VAC SL1250/KNX-TP Twisted Pair with BUS communication (with binary input, relays, mA output) V0507MPHFI 26148.50
FJ 100-240 VAC SL1250/Modbus/RTU RS 485 with BUS communication (with binary input, relays, mA output) V0507MPHFJ 26186.00
FK 100-240 VAC SL1250/BACnet MS/TP RS 485 with BUS communication (with binary input, relays, mA output) V0507MPHFK 26186.00
FL 100-240 VAC SL1250/Modbus/TCP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFL 26109.00
FM 100-240 VAC SL1250/KNX/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFM 26109.00
FN 100-240 VAC SL1250/BACnet/IP Ethernet with BUS communication (with binary input, relays, mA output) V0507MPHFN 26109.00
MS – TA-MC100 FSE V0507MPHMS 27533.00
MT – TA-MC100 FSR V0507MPHMT 27533.00
2F 24VAC/VDC SL1250/24 Fail-Safe, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0507MPH2F 26861.00
2R 100-240 VAC SL1250 /HV Fail-Safe w/Relay, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off V0507MPH2R 27416.00

TA Series 7MP TA SERIES 7MP – VALVE AND ACTUATOR

SIZES 6” & 6” HIGH FLOW (HF) inches Actuator Part Code List Price
DUCTILE IRON TA MC160 24VAC V0607MP00U $29247.00
TA MC160 115VAC V0607MP00V 29322.50
Pressure Indepenent Balancing 6
TA MC253SE 24VAC v0607MP00S 41741.50
and Modulating Control Valve TA MC253SE 115VAC V0607MP01S 43305.50
TA MC160 24VAC V0607MPH0U 32679.00
TA MC160 115VAC V0607MPH0V 32754.50
6 HF
TA MC253SE 24VAC v0607MPH0S 45173.50
TA MC253SE 115VAC V0607MPH1S 46737.50
TA SERIES 7MP – ADAPTER OR ACTUATOR ONLY
Victaulic
Description Part Code List Price
TA MC253 SE Adapter for 6” Series 7MP P0607MPADP $520.00
TA MC253 SE 24VAC Actuator P0607FP00S 15640.50
TA MC253 SE 115VAC Actuator P0607MP01S 17204.50
TA Series 7MP – TA SERIES 7MP – VALVE ONLY

Valve Only inches Part Code Price Each
2½ V0247MP000 $3777.50
3 V0307MP000 4398.50
4 V0407MP000 12385.50
4 HF V0407MPH00 14974.50
5 V0507MP000 19841.00
5 HF V0507MPH00 24084.00
6 V0607MP000 25581.00
6 HF V0607MPH00 29013.00

TA Series 7MP & 7FP – Actuator Only

TA SERIES 7MP & 7FP – ACTUATOR ONLY
Actuator Supply Victaulic

Actuators Code Option Voltage Input Signal Options Part Code Price Each
70 24 VAC/VDC 0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off P0007FC070 $964.00
TA-Slider 750
G0 100-240 VAC 0(2)- 10 VDC, 0(4)-20 mA, 3-point, on-off P0007FC0G0 1333.00
8A 24 VAC/VDC With binary input, relays, mA output P0007FC08A 1260.50
HA 100-240 VAC With binary input, relays, mA output P0007FC0HA 1630.00
KNX-TP Twisted Pair with BUS communication
8B P0007FC08B 1486.00
(without binary input, relays, mA output)
Modbus/RTU RS 485 with BUS communication
8C P0007FC08C 1535.50
BACnet MS/TP RS 485 with BUS communication
8D P0007FC08D 1522.00
24 VAC/VDC
Modbus/TCP Ethernet with BUS communication
8E P0007FC08E 1445.50
KNX/IP Ethernet with BUS communication
8F P0007FC08F 1445.50
BACnet/IP Ethernet with BUS communication
8G P0007FC08G 1445.50
KNX-TP Twisted Pair with BUS communication

HB P0007FC0HB 1854.00
Modbus/RTU RS 485 with BUS communication
HC P0007FC0HC 1903.50
BACnet MS/TP RS 485 with BUS communication
HD P0007FC0HD 1892.00
100-240 VAC
Modbus/TCP Ethernet with BUS communication
HE P0007FC0HE 1815.50
KNX/IP Ethernet with BUS communication
HF P0007FC0HF 1815.50
TA-Slider 750 Plus BACnet/IP Ethernet with BUS communication
HG P0007FC0HG 1815.50
KNX-TP Twisted Pair with BUS communication,
8I P0007FC08I 1551.50
binary input, relays, mA output
Modbus/RTU RS 485 with BUS communication,
8J P0007FC08J 1589.00
BACnet MS/TP RS 485 with BUS communication,
8K P0007FC08K 1589.00
24 VAC/VDC
Modbus/TCP Ethernet with BUS communication,
8L P0007FC08L 1513.00
KNX/IP Ethernet with BUS communication,
8M P0007FC08M 1513.00
BACnet/IP Ethernet with BUS communication,
8N P0007FC08N 1513.00
KNX-TP Twisted Pair with BUS communication,

HI P0007FC0HI 1922.50
Modbus/RTU RS 485 with BUS communication,
HJ P0007FC0HJ 1958.50
BACnet MS/TP RS 485 with BUS communication,
HK P0007FC0HK 1958.50
100-240 VAC
Modbus/TCP Ethernet with BUS communication,
HL P0007FC0HL 1881.00
KNX/IP Ethernet with BUS communication,
HM P0007FC0HM 1881.00
BACnet/IP Ethernet with BUS communication,
HN P0007FC0HN 1881.00
7F 24VAC/VDC SL750/24 Fail-Safe, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off P0007FC07F 2453.00
TA-Slider 750 Failsafe
7R 100-240 VAC SL750 /HV Fail-Safe w/Relay, 0(2)-10VDC, 0(4)-20 mA, 3-point, on-off P0007FCR7F 2944.50

TA Series 76W 6-Way Valve
TA Series 76W TA SERIES 76W 6-WAY VALVE – BARE

6-WAY VALVE inches Part Code List Price
Refer to publication 08.56 ½ V00476WN00 $752.50
¾ V00676WN00 1131.50
¾ HF V00676WH00 1286.00
TA SERIES 76W 6-WAY VALVE – ACTUATOR ONLY
Victaulic
Actuator Part Code List Price
TA M106 CO P00076W060 $730.50
TA SERIES 76W 6-WAY VALVE WITH TA M106 CO ACTUATOR

inches Part Code List Price
½ V00476WN60 $1481.50
¾ V00676WN60 1861.00
¾ HF V00676WH60 2015.00
Balancing Control Valve Presetting Tool
Balancing Control PRESETTING TOOL FOR SERIES TC AND SERIES TCM
Victaulic Part Code Price Each

Valve Accessories R000TBV000 $76.00

Series 76X ICSS – Low Lead Balancing Valve
Series 76X SERIES 76X
Flow Victaulic Flow Victaulic

ICSS – LOW LEAD BALANCING GPM Part Code List Price GPM Part Code List Price
VALVE ½” – Low Differential 2 – 32 psid ¾” – Low Differential 2 – 32 psid
Refer to publication 08.51 0.33 F00476XL0A $244.00 0.33 F00676XL0A $296.00
0.50 F00476XL0B 244.00 0.50 F00676XL0B 296.00
0.67 F00476XL0C 244.00 0.67 F00676XL0C 296.00
0.75 F00476XL0D 244.00 0.75 F00676XL0D 296.00
0.88 F00476XL0E 244.00 0.88 F00676XL0E 296.00
1.00 F00476XL0F 244.00 1.00 F00676XL0F 296.00
1.10 F00476XL0G 244.00 1.10 F00676XL0G 296.00
1.25 F00476XL0H 244.00 1.25 F00676XL0H 296.00
1.50 F00476XL0I 244.00 1.50 F00676XL0I 296.00
1.75 F00476XL0J 244.00 1.75 F00676XL0J 296.00
2.00 F00476XL0K 244.00 2.00 F00676XL0K 296.00
2.25 F00476XL0L 244.00 2.25 F00676XL0L 296.00
3.00 F00476XL0M 244.00 3.00 F00676XL0M 296.00
½” – High Differential 5 – 60 psid 3.50 F00676XL0N 296.00
1.00 F00476XH0F 244.00 4.00 F00676XL0O 296.00
1.50 F00476XH0I 244.00 4.50 F00676XL0P 296.00
2.00 F00476XH0K 244.00 5.00 F00676XL0Q 296.00
2.50 F00476XH0Y 244.00 6.00 F00676XL0R 296.00
3.00 F00476XH0M 244.00 7.00 F00676XL0S 296.00
4.00 F00476XH0O 244.00 8.00 F00676XL0T 296.00
5.00 F00476XH0Q 244.00 ¾” – High Differential 5 – 60 psid
1.00 F00676XH0F 296.00
1.50 F00676XH0I 296.00
2.00 F00676XH0K 296.00
2.50 F00676XH0Y 296.00
3.00 F00676XH0M 296.00
4.00 F00676XH0O 296.00
5.00 F00676XH0Q 296.00
6.00 F00676XH0R 296.00
7.00 F00676XH0S 296.00
8.00 F00676XH0T 296.00
9.00 F00676XH0U 296.00
10.00 F00676XH0V 296.00
11.00 F00676XH0W 296.00
12.00 F00676XH0X 296.00

TA Series 7FP (FUS1ON P)

PRESSURE INDEPENDENT COMBINED
BALANCING AND CONTROL VALVE WITH
INDEPENDENT EQM CHARACTERISTICS
TA SERIES 7FP – STANDARD RECOMMENDED VALVE AND ACTUATOR
KOIL-KIT™ Coil
Pack Figure
Nominal Size String Victaulic
inches Actuator Supply Voltage Input Signal Options * Positions 18 – 23 Part Code Price Each
M 24V AC/DC 3 point or on/off KDFDFM V0127FP00M $4375.50
N 115V AC 3 point or on/off KDFDFN V0127FP00N 4745.50
1¼ P 24V AC/DC 0-10V; 4-20mA KDFDFP V0127FP00P 4375.50
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFQ V0127FP00Q 5954.00
R 115V AC 0-10V; 4-20mA; 3 point or on/off KDFDFR V0127FP00R 6319.50
M 24V AC/DC 3 point or on/off KEFEFM V0147FP00M 4518.00
N 115V AC 3 point or on/off KEFEFN V0147FP00N 4888.00
1½ P 24V AC/DC 0-10V; 4-20mA KEFEFP V0147FP00P 4518.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFQ V0147FP00Q 6096.50
R 115V AC 0-10V; 4-20mA; 3 point or on/off KEFEFR V0147FP00R 6462.00
M 24V AC/DC 3 point or on/off KFFFFM V0207FP00M 8038.00
N 115V AC 3 point or on/off KFFFFN V0207FP00N 8408.00
2 P 24V AC/DC 0-10V; 4-20mA KFFFFP V0207FP00P 8038.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFQ V0207FP00Q 9616.50
R 115V AC 0-10V; 4-20mA; 3 point or on/off KFFFFR V0207FP00R 9982.00
Q 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00Q 21529.50
4
R 115V AC 0-10V; 4-20mA; 3 point or on/off – V0407FP00R 21895.00
NOTE: Choice of Input Signals done by adjusting jumpers when installing.

NOTE: For an actuator code description, reference the Actuator Only chart on page 7-40.
TA SERIES 7FP – VALVE AND FAIL SAFE FUNCTION ACTUATOR
KOIL-KIT™ Coil
Pack Figure
Nominal Size String Victaulic
inches Actuator * Supply Voltage Input Signal Options Positions 18 – 24 Part Code Price Each
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFS V0127FP00S $6535.50
1¼
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KDFDFT V0127FP00T 6535.50
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFS V0147FP00S 6678.00
1½
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KEFEFT V0147FP00T 6678.00
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFS V0207FP00S 10198.00
2
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off KFFFFT V0207FP00T 10198.00
S 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00S 22111.00
4
T 24V AC/DC 0-10V; 4-20mA; 3 point or on/off – V0407FP00T 22111.00
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).

TA SERIES 7FP – VALVE ONLY
Nominal Size Victaulic Koil-Kit Coil Pack Figure String

inches Part Code Positions 18 – 23 Price Each
1¼ V0127FP000 KDFDF0 $3086.50
1½ V0147FP000 KEFEF0 3229.00
2 V0207FP000 KFFFF0 6749.00
4 V0407FP000 – 18436.50
TA SERIES 7FP – ACTUATOR ONLY
Nominal Size IMI TA Actuator Victaulic

inches Actuator * Nomenclature Supply Voltage Input Signal Options Part Code Price Each
1¼ – 2 M TA-MC55/24 24V AC/DC 3 point or on/off P0127FC00M $1289.00
1¼ – 2 N TA-MC55/115 115V AC 3 point or on/off P0127FC00N 1659.00
1¼ – 2 P TA-MC55/Y 24V AC/DC 0-10V; 4-20mA P0127FC00P 1289.00
1¼ – 4 Q TA-MC100/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off P0127FC00Q 2867.50
1¼ – 4 R TA-MC100/115 115V AC 0-10V; 4-20mA; 3 point or on/off P0127FC00R 3233.00
1¼ – 4 S TA-MC100FSE/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off P0127FC00S 3449.00
1¼ – 4 T TA-MC100FSR/24 24V AC/DC 0-10V; 4-20mA; 3 point or on/off P0127FC00T 3449.00
* “S” Actuator is an FSE Fail Close Valve (No Flow); “T” Actuator is an FSR Fail Open Valve (Full Flow).
NOTE: P0247FCADP Adapter required for valves above 2”. Contact Victaulic for pricing and delivery.


Sizes 1¼ – 2”
TA SERIES 7FP – SLIDER 750/750 PLUS VALVE AND ACTUATOR
Nominal Size – inches

Description 1¼ 1½ 2
Actuator Victaulic Victaulic Victaulic
Code Option 7FP Valve and Actuator Part Code List Price Part Code List Price Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0127FP070 $4050.50 V0147FP070 $4193.00 V0207FP070 $7713.00
G0 SL750/HV Std, 3-pt-115/230 VAC V0127FP0G0 4419.50 V0147FP0G0 4562.00 V0207FP0G0 8082.00
8A SL750/24 Plus, 3-pt-24 VAC/VDC-w/o opt board V0127FP08A 4347.00 V0147FP08A 4489.50 V0207FP08A 8009.50
HA SL750/HV Plus, 3-pt-115/230 VAC-w/o opt board V0127FP0HA 4716.50 V0147FP0HA 4859.00 V0207FP0HA 8379.00
8B SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-TP V0127FP08B 4572.50 V0147FP08B 4715.00 V0207FP08B 8235.00
8C SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus RS485 V0127FP08C 4622.00 V0147FP08C 4764.50 V0207FP08C 8284.50
8D SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet RS-485 V0127FP08D 4608.50 V0147FP08D 4751.00 V0207FP08D 8271.00
8E SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus/TCP V0127FP08E 4532.00 V0147FP08E 4674.50 V0207FP08E 8194.50
8F SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-IP V0127FP08F 4532.00 V0147FP08F 4674.50 V0207FP08F 8194.50
8G SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet/IP V0127FP08G 4532.00 V0147FP08G 4674.50 V0207FP08G 8194.50
HB SL750/HV Plus, 3-pt-115/230 VAC-KNX-TP V0127FP0HB 4940.50 V0147FP0HB 5083.00 V0207FP0HB 8603.00
HC SL750/HV Plus, 3-pt-115/230 VAC-Modbus RS485 V0127FP0HC 4990.00 V0147FP0HC 5132.50 V0207FP0HC 8652.50
HD SL750/HV Plus, 3-pt-115/230 VAC-BACnet RS-485 V0127FP0HD 4978.50 V0147FP0HD 5121.00 V0207FP0HD 8641.00
HE SL750/HV Plus, 3-pt-115/230 VAC-Modbus/TCP V0127FP0HE 4902.00 V0147FP0HE 5044.50 V0207FP0HE 8564.50
HF SL750/HV Plus, 3-pt-115/230 VAC-KNX-IP V0127FP0HF 4902.00 V0147FP0HF 5044.50 V0207FP0HF 8564.50
HG SL750/HV Plus, 3-pt-115/230 VAC-BACnet/IP V0127FP0HG 4902.00 V0147FP0HG 5044.50 V0207FP0HG 8564.50
8I SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-TP+Rly V0127FP08I 4638.00 V0147FP08I 4780.50 V0207FP08I 8300.50
8J SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0127FP08J 4675.50 V0147FP08J 4818.00 V0207FP08J 8338.00
8K SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0127FP08K 4675.50 V0147FP08K 4818.00 V0207FP08K 8338.00
8L SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0127FP08L 4599.50 V0147FP08L 4742.00 V0207FP08L 8262.00
8M SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-IP+Rly V0127FP08M 4599.50 V0147FP08M 4742.00 V0207FP08M 8262.00
8N SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0127FP08N 4599.50 V0147FP08N 4742.00 V0207FP08N 8262.00
HI SL750/HV Plus, 3-pt-115/230 VAC-KNX-TP+Rly V0127FP0HI 5009.00 V0147FP0HI 5151.50 V0207FP0HI 8671.50
HJ SL750/HV Plus, 3-pt-115/230 VAC-Modbus RS485+Rly V0127FP0HJ 5045.00 V0147FP0HJ 5187.50 V0207FP0HJ 8707.50
HK SL750/HV Plus, 3-pt-115/230 VAC-BACnet RS-485+Rly V0127FP0HK 5045.00 V0147FP0HK 5187.50 V0207FP0HK 8707.50
HL SL750/HV Plus, 3-pt-115/230 VAC-Modbus/TCP+Rly V0127FP0HL 4967.50 V0147FP0HL 5110.00 V0207FP0HL 8630.00
HM SL750/HV Plus, 3-pt-115/230 VAC-KNX-IP+Rly V0127FP0HM 4967.50 V0147FP0HM 5110.00 V0207FP0HM 8630.00
HN SL750/HV Plus, 3-pt-115/230 VAC-BACnet/IP+Rly V0127FP0HN 4967.50 V0147FP0HN 5110.00 V0207FP0HN 8630.00



Sizes 4”
TA SERIES 7FP – SLIDER 750/750 PLUS VALVE AND ACTUATOR
Nominal Size – inches

Description 4
Victaulic
Actuator Code Option 7FP Valve and Actuator Part Code List Price
70 SL750/24 Std, 3-pt-24 VAC/VDC V0407FP070 $19400.50
G0 SL750/HV Std, 3-pt-115/230 VAC V0407FP0G0 19769.50
8A SL750/24 Plus, 3-pt-24 VAC/VDC-w/o opt board V0407FP08A 19697.00
HA SL750/HV Plus, 3-pt-115/230 VAC-w/o opt board V0407FP0HA 20066.50
8B SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-TP V0407FP08B 19922.50
8C SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus RS485 V0407FP08C 19972.00
8D SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet RS-485 V0407FP08D 19958.50
8E SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus/TCP V0407FP08E 19882.00
8F SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-IP V0407FP08F 19882.00
8G SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet/IP V0407FP08G 19882.00
HB SL750/HV Plus, 3-pt-115/230 VAC-KNX-TP V0407FP0HB 20290.50
HC SL750/HV Plus, 3-pt-115/230 VAC-Modbus RS485 V0407FP0HC 20340.00
HD SL750/HV Plus, 3-pt-115/230 VAC-BACnet RS-485 V0407FP0HD 20328.50
HE SL750/HV Plus, 3-pt-115/230 VAC-Modbus/TCP V0407FP0HE 20252.00
HF SL750/HV Plus, 3-pt-115/230 VAC-KNX-IP V0407FP0HF 20252.00
HG SL750/HV Plus, 3-pt-115/230 VAC-BACnet/IP V0407FP0HG 20252.00
8I SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-TP+Rly V0407FP08I 19988.00
8J SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus RS485+Rly V0407FP08J 20025.50
8K SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet RS-485+Rly V0407FP08K 20025.50
8L SL750/24 Plus, 3-pt-24 VAC/VDC-Modbus/TCP+Rly V0407FP08L 19949.50
8M SL750/24 Plus, 3-pt-24 VAC/VDC-KNX-IP+Rly V0407FP08M 19949.50
8N SL750/24 Plus, 3-pt-24 VAC/VDC-BACnet/IP+Rly V0407FP08N 19949.50
HI SL750/HV Plus, 3-pt-115/230 VAC-KNX-TP+Rly V0407FP0HI 20359.00
HJ SL750/HV Plus, 3-pt-115/230 VAC-Modbus RS485+Rly V0407FP0HJ 20395.00
HK SL750/HV Plus, 3-pt-115/230 VAC-BACnet RS-485+Rly V0407FP0HK 20395.00
HL SL750/HV Plus, 3-pt-115/230 VAC-Modbus/TCP+Rly V0407FP0HL 20317.50
HM SL750/HV Plus, 3-pt-115/230 VAC-KNX-IP+Rly V0407FP0HM 20317.50
HN SL750/HV Plus, 3-pt-115/230 VAC-BACnet/IP+Rly V0407FP0HN 20317.50


Standard Koil-Kit™ Coil Pack
Manual Koil-Kit™ Coil Pack with Series 78KH Union Inlet Globe Style Valves
KOIL-KIT™ Coil Pack

Standard Koil-Kit™ Coil Pack
MANUAL KOIL-KIT™ COIL PACK WITH SERIES 78KH UNION INLET GLOBE STYLE VALVES
Nominal Flow Without PT Ports and Handle Extensions With PT Ports and Handle Extensions
Range (GPM) Expected
Based on Control
Manual Valve Valve
Size (Publication Size
08.16) or (78U
Auto Cartridge Outlet
Flow Rates and Valve
Kit (Publication Nominal Size Victaulic Price Victaulic Price
Description 08.34) Kit Size Inlet) Reference Figure String Part Code Each Reference Figure String Part Code Each
0.6 – 2.8 ½ ½ K9YAFAF00000AFAM0MAMAF000 K00A799CK3 $522.50 K9YAFAF00000AFAM0MAMAF020 K000799G42 $710.00
78Y Fem x 2.0 – 6.0 ¾ ½ K9YBFBF00000BFAM0MAMBF000 K000799006 557.00 K9YBFBF00000BFAM0MAMBF020 K000799G43 744.50
Fem, 2.0 – 6.0 ¾ ¾ K9YBFBF00000BFBM0MBMBF000 K00A799CK4 557.00 K9YBFBF00000BFBM0MBMBF020 K000799H58 744.50
78U Fem x 3.9 – 10.0 1 ½ K9YCFCF00000CFAM0MAMCF000 K000799010 784.50 K9YCFCF00000CFAM0MAMCF020 K000799I86 972.00
Male Union,
3.9 – 10.0 1 ¾ K9YCFCF00000CFBM0MBMCF000 K000799207 784.50 K9YCFCF00000CFBM0MBMCF020 K000799G38 972.00
78KH Male
Union x Fem 3.9 – 10.0 1 1 K9YCFCF00000CFCM0MCMCF000 K000799114 784.50 K9YCFCF00000CFCM0MCMCF020 K000799L63 972.00
without 5.0 – 15.0 1¼ 1¼ K9YDFDF00000DFDM0MDMDF000 K00A799CK5 977.00 K9YDFDF00000DFDM0MDMDF020 K000799L64 1164.50
hoses 6.6 – 20.0 1½ 1½ K9YEFEF00000EFEM0MEMEF000 K000799117 1374.00 K9YEFEF00000EFEM0MEMEF020 K000799R63 1561.50
12.6 – 36.0 2 2 K9YFFFF00000FFFM0MFMFF000 K000799116 1727.50 K9YFFFF00000FFFM0MFMFF020 K000799T12 1915.00
78Y Fem x 0.6 – 2.8 ½ ½ K9YAFAF0AEAEAFAM0MAMAF000 K000799296 716.50 K9YAFAF0AEAEAFAM0MAMAF020 K00A7995JP 904.00
Fem w/ 2’ 2.0 – 6.0 ¾ ½ K9YBFBF0BEBEBFAM0MAMBF000 K000799211 848.00 K9YBFBF0BEBEBFAM0MAMBF020 K00A7995JQ 1035.50
Male x Male 2.0 – 6.0 ¾ ¾ K9YBFBF0BEBEBFBM0MBMBF000 K000799290 848.00 K9YBFBF0BEBEBFBM0MBMBF020 K00A7995JR 1035.50
Union Hose,
78U Fem x 3.9 – 10.0 1 ½ K9YCFCF0CECECFAM0MAMCF000 K000799435 1242.50 K9YCFCF0CECECFAM0MAMCF020 K00A7995JS 1430.00
Male Union 3.9 – 10.0 1 ¾ K9YCFCF0CECECFBM0MBMCF000 K000799B10 1242.50 K9YCFCF0CECECFBM0MBMCF020 K00A7995JT 1430.00
w/ 2’ Male x 3.9 – 10.0 1 1 K9YCFCF0CECECFCM0MCMCF000 K000799I89 1242.50 K9YCFCF0CECECFCM0MCMCF020 K00A7995JU 1430.00
Male Union
Hose, 5.0 – 15.0 1¼ 1¼ K9YDFDF0DEDEDFDM0MDMDF000 K000799S39 1806.00 K9YDFDF0DEDEDFDM0MDMDF020 K00A7995JV 1993.50
78KH Male 6.6 – 20.0 1½ 1½ K9YEFEF0EEEEEFEM0MEMEF000 K000799AM5 2483.00 K9YEFEF0EEEEEFEM0MEMEF020 K00A7995JW 2670.50
Union x Fem 12.6 – 36.0 2 2 K9YFFFF0FEFEFFFM0MFMFF000 K000799P31 3686.50 K9YFFFF0FEFEFFFM0MFMFF020 K00A7995JX 3874.00
0.6 – 2.8 ½ ½ K9TAFAF00000AFAM0MAMAF000 K00A799DKA 480.00 K9TAFAF00000AFAM0MAMAF020 K00A7995JO 667.50
78T Fem x 2.0 – 6.0 ¾ ½ K9TBFBF00000BFAM0MAMBF000 K000799085 513.00 K9TBFBF00000BFAM0MAMBF020 K000799O17 700.50
Fem, 2.0 – 6.0 ¾ ¾ K9TBFBF00000BFBM0MBMBF000 K000799FAT 513.00 K9TBFBF00000BFBM0MBMBF020 K000799EV4 700.50
78U Fem x 3.9 – 10.0 1 ½ K9TCFCF00000CFAM0MAMCF000 K000799683 714.00 K9TCFCF00000CFAM0MAMCF020 K000799O18 901.50
Male Union,
3.9 – 10.0 1 ¾ K9TCFCF00000CFBM0MBMCF000 K000799N17 714.00 K9TCFCF00000CFBM0MBMCF020 K000799O22 901.50
78KH Male
Union x Fem 3.9 – 10.0 1 1 K9TCFCF00000CFCM0MCMCF000 K000799908 714.00 K9TCFCF00000CFCM0MCMCF020 K00A7995JY 901.50
without 5.0 – 15.0 1¼ 1¼ K9TDFDF00000DFDM0MDMDF000 K000799909 893.50 K9TDFDF00000DFDM0MDMDF020 K00A7995JZ 1081.00
hoses 6.6 – 20.0 1½ 1½ K9TEFEF00000EFEM0MEMEF000 K00A799D27 1241.50 K9TEFEF00000EFEM0MEMEF020 K000799EW1 1429.00
12.6 – 36.0 2 2 K9TFFFF00000FFFM0MFMFF000 K000799910 1572.00 K9TFFFF00000FFFM0MFMFF020 K00A799AER 1759.50
78T Fem x 0.6 – 2.8 ½ ½ K9TAFAF0AEAEAFAM0MAMAF000 K000799531 674.00 K9TAFAF0AEAEAFAM0MAMAF020 K00A7995J0 861.50
Fem w/ 2’ 2.0 – 6.0 ¾ ½ K9TBFBF0BEBEBFAM0MAMBF000 K000799212 804.00 K9TBFBF0BEBEBFAM0MAMBF020 K000799I43 991.50
Male x Male 2.0 – 6.0 ¾ ¾ K9TBFBF0BEBEBFBM0MBMBF000 K000799205 804.00 K9TBFBF0BEBEBFBM0MBMBF020 K00A7995J2 991.50
Union Hose,
78U Fem x 3.9 – 10.0 1 ½ K9TCFCF0CECECFAM0MAMCF000 K000799532 1172.00 K9TCFCF0CECECFAM0MAMCF020 K00A7995J3 1359.50
Male Union 3.9 – 10.0 1 ¾ K9TCFCF0CECECFBM0MBMCF000 K000799530 1172.00 K9TCFCF0CECECFBM0MBMCF020 K000799G25 1359.50
w/ 2’ Male x 3.9 – 10.0 1 1 K9TCFCF0CECECFCM0MCMCF000 K000799AO4 1172.00 K9TCFCF0CECECFCM0MCMCF020 K00A7995J4 1359.50
Male Union
Hose, 5.0 – 15.0 1¼ 1¼ K9TDFDF0DEDEDFDM0MDMDF000 K000799ET4 1722.50 K9TDFDF0DEDEDFDM0MDMDF020 K00A7995J5 1910.00
78KH Male 6.6 – 20.0 1½ 1½ K9TEFEF0EEEEEFEM0MEMEF000 K00A799A5J 2350.50 K9TEFEF0EEEEEFEM0MEMEF020 K00A7995J6 2538.00
Union x Fem 12.6 – 36.0 2 2 K9TFFFF0FEFEFFFM0MFMFF000 K00A799BJ1 3531.00 K9TFFFF0FEFEFFFM0MFMFF020 K00A7995J7 3718.50

Manual Koil-Kit™ Coil Pack with TA Series 786H Sweat Globe Style Valves
MANUAL KOIL-KIT™ COIL PACK WITH TA SERIES 786H SWEAT GLOBE STYLE VALVES
Nominal Flow Without PT Ports With PT Ports and Handle Extensions

Range (GPM) Expected
Based on Control
Manual Valve Valve
Size (Publication Size
08.16) or (78U
Auto Cartridge Outlet
Flow Rates and Valve
Kit (Publication Nominal Size Victaulic Price Victaulic Price
Description 08.34) Kit Size Inlet) Reference Figure String Part Code Each Reference Figure String Part Code Each
78Y Sweat x 0.6 – 2.8 ½ ½ K9YASAS00000ASAM0MASAS000 K000799051 $449.00 K9YASAS00000ASAM0MASAS020 K00A7995JD $636.50
Sweat, 2.0 – 6.0 ¾ ¾ K9YBSBS00000BSBM0MBSBS000 K000799096 476.00 K9YBSBS00000BSBM0MBSBS020 K00A7995JE 663.50
78U Sweat x
Male Union, 3.9 – 10.0 1 1 K9YCSCS00000CSCM0MCSCS000 K000799120 692.50 K9YCSCS00000CSCM0MCSCS020 K00A7995JF 880.00
786H Sweat 5.0 – 15.0 1¼ 1¼ K9YDSDS00000DSDM0MDSDS000 K000799J12 904.50 K9YDSDS00000DSDM0MDSDS020 K00A7995JG 1092.00
x Sweat 6.6 – 20.0 1½ 1½ K9YESES00000ESEM0MESES000 K000799100 1207.50 K9YESES00000ESEM0MESES020 K00A799A5G 1395.00
without
2’ hoses 12.6 – 36.0 2 2 K9YFSFS00000FSFM0MFSFS000 K000799263 1606.50 K9YFSFS00000FSFM0MFSFS020 K00A7995JH 1794.00
attached
78T Sweat x 0.6 – 2.8 ½ ½ K9TASAS00000ASAM0MASAS000 K000799P51 406.50 K9TASAS00000ASAM0MASAS020 K00A799A4J 594.00
Sweat, 2.0 – 6.0 ¾ ¾ K9TBSBS00000BSBM0MBSBS000 K000799206 432.00 K9TBSBS00000BSBM0MBSBS020 K00A7995JI 619.50
78U Sweat x
Male Union, 3.9 – 10.0 1 1 K9TCSCS00000CSCM0MCSCS000 K00A799BSX 622.00 K9TCSCS00000CSCM0MCSCS020 K00A7995JJ 809.50
786H Sweat 5.0 – 15.0 1¼ 1¼ K9TDSDS00000DSDM0MDSDS000 K000799EV6 821.00 K9TDSDS00000DSDM0MDSDS020 K00A7995JK 1008.50
x Sweat 6.6 – 20.0 1½ 1½ K9TESES00000ESEM0MESES000 K000799Y70 1075.00 K9TESES00000ESEM0MESES020 K00A799A4M 1262.50
without
2’ hoses 12.6 – 36.0 2 2 K9TFSFS00000FSFM0MFSFS000 K000799P53 1451.00 K9TFSFS00000FSFM0MFSFS020 K00A7995JL 1638.50
attached

Manual Koil-Kit™ Coil Pack with Series 78BL Quarter Turn Balancing Ball Valves
MANUAL KOIL-KIT™ COIL PACK WITH SERIES 78BL QUARTER TURN BALANCING BALL VALVES
Expected Without PT Ports With PT Ports

Nominal Flow Control
Range (GPM) Based Valve Size
on Manual Valve (78U Outlet
Size (Publication Size &
08.50) or Auto Balancing
Cartridge Flow rates Nominal Kit Valve Size Price Price
Kit Description (Publication 08.34) Size Inlet) Reference Figure String Each Reference Figure String Each
0.4 – 5.1 ½ ½ K9YASAS00000ASAM0LAMAS000 $558.00 K9YASAS00000ASAM0LAMAS020 $745.50
1.1 – 11.6 ¾ ½ K9YBSBS00000BSAM0LAMBS000 595.00 K9YBSBS00000BSAM0LAMBS020 782.50
78Y Sweat x 1.1 – 11.6 ¾ ¾ K9YBSBS00000BSBM0LBMBS000 595.00 K9YBSBS00000BSBM0LBMBS020 782.50
Sweat,
78U Sweat x 1.2 – 19.2 1 ½ K9YCSCS00000CSAM0LAMCS000 821.50 K9YCSCS00000CSAM0LAMCS020 1009.00
Male Union, 1.2 – 19.2 1 ¾ K9YCSCS00000CSBM0LBMCS000 821.50 K9YCSCS00000CSBM0LBMCS020 1009.00
78BL Male 1.2 – 19.2 1 1 K9YCSCS00000CSCM0LCMCS000 821.50 K9YCSCS00000CSCM0LCMCS020 1009.00
Union x Sweat
without hoses 2.2 – 30.6 1¼ 1¼ K9YDSDS00000DSDM0LDMDS000 1013.50 K9YDSDS00000DSDM0LDMDS020 1201.00
2.6 – 44.6 1½ 1½ K9YESES00000ESEM0LEMES000 1412.50 K9YESES00000ESEM0LEMES020 1600.00
6.3 – 83.0 2 2 K9YFSFS00000FSFM0LFMFS000 1764.50 K9YFSFS00000FSFM0LFMFS020 1952.00
0.4 – 5.3 ½ ½ K9YAFAF00000AFAM0LAMAF000 522.50 K9YAFAF00000AFAM0LAMAF020 710.00
0.9 - 12.5 ¾ ½ K9YBFBF00000BFAM0LAMBF000 557.00 K9YBFBF00000BFAM0LAMBF020 744.50
78Y Fem X Fem, 0.9 – 12.5 ¾ ¾ K9YBFBF00000BFBM0LBMBF000 557.00 K9YBFBF00000BFBM0LBMBF020 744.50
78U Fem x Male 1.6 – 19.3 1 ½ K9YCFCF00000CFAM0LAMCF000 784.50 K9YCFCF00000CFAM0LAMCF020 972.00
Union,
1.6 – 19.3 1 ¾ K9YCFCF00000CFBM0LBMCF000 784.50 K9YCFCF00000CFBM0LBMCF020 972.00
78BL Male
Union x Fem 1.6 – 19.3 1 1 K9YCFCF00000CFCM0LCMCF000 784.50 K9YCFCF00000CFCM0LCMCF020 972.00
without hoses 2.1 – 30.5 1¼ 1¼ K9YDFDF00000DFDM0LDMDF000 977.00 K9YDFDF00000DFDM0LDMDF020 1164.50
2.7 – 45.4 1½ 1½ K9YEFEF00000EFEM0LEMEF000 1374.00 K9YEFEF00000EFEM0LEMEF020 1561.50
6.2 – 85.0 2 2 K9YFFFF00000FFFM0LFMFF000 1727.50 K9YFFFF00000FFFM0LFMFF020 1915.00
0.4 – 5.3 ½ ½ K9YAFAF0AEAEAFAM0LAMAF000 716.50 K9YAFAF0AEAEAFAM0LAMAF020 904.00
78Y Fem x Fem
w/ 2’ Male x 0.9 - 12.5 ¾ ½ K9YBFBF0BEBEBFAM0LAMBF000 848.00 K9YBFBF0BEBEBFAM0LAMBF020 1035.50
Male Union 0.9 – 12.5 ¾ ¾ K9YBFBF0BEBEBFBM0LBMBF000 848.00 K9YBFBF0BEBEBFBM0LBMBF020 1035.50
Hose, 1.6 – 19.3 1 ½ K9YCFCF0CECECFAM0LAMCF000 1242.50 K9YCFCF0CECECFAM0LAMCF020 1430.00
78U Fem x
1.6 – 19.3 1 ¾ K9YCFCF0CECECFBM0LBMCF000 1242.50 K9YCFCF0CECECFBM0LBMCF020 1430.00
Male Union w/
2’ Male x Male 1.6 – 19.3 1 1 K9YCFCF0CECECFCM0LCMCF000 1242.50 K9YCFCF0CECECFCM0LCMCF020 1430.00
Union Hose, 2.1 – 30.5 1¼ 1¼ K9YDFDF0DEDEDFDM0LDMDF000 1806.00 K9YDFDF0DEDEDFDM0LDMDF020 1993.50
78BL Male 2.7 – 45.4 1½ 1½ K9YEFEF0EEEEEFEM0LEMEF000 2483.00 K9YEFEF0EEEEEFEM0LEMEF020 2670.50
Union x Fem
6.2 – 85.0 2 2 K9YFFFF0FEFEFFFM0LFMFF000 3686.50 K9YFFFF0FEFEFFFM0LFMFF020 3874.00
0.4 – 5.1 ½ ½ K9TASAS00000ASAM0LAMAS000 515.50 K9TASAS00000ASAM0LAMAS020 703.00
1.1 – 11.6 ¾ ½ K9TBSBS00000BSAM0LAMBS000 551.00 K9TBSBS00000BSAM0LAMBS020 738.50
78T Sweat x 1.1 – 11.6 ¾ ¾ K9TBSBS00000BSBM0LBMBS000 551.00 K9TBSBS00000BSBM0LBMBS020 738.50
Sweat,
78U Sweat x 1.2 – 19.2 1 ½ K9TCSCS00000CSAM0LAMCS000 751.00 K9TCSCS00000CSAM0LAMCS020 938.50
Male Union, 1.2 – 19.2 1 ¾ K9TCSCS00000CSBM0LBMCS000 751.00 K9TCSCS00000CSBM0LBMCS020 938.50
78BL Male 1.2 – 19.2 1 1 K9TCSCS00000CSCM0LCMCS000 751.00 K9TCSCS00000CSCM0LCMCS020 938.50
Union x Sweat
without hoses 2.2 – 30.6 1¼ 1¼ K9TDSDS00000DSDM0LDMDS000 930.00 K9TDSDS00000DSDM0LDMDS020 1117.50
2.6 – 44.6 1½ 1½ K9TESES00000ESEM0LEMES000 1280.00 K9TESES00000ESEM0LEMES020 1467.50
6.3 – 83.0 2 2 K9TFSFS00000FSFM0LFMFS000 1609.00 K9TFSFS00000FSFM0LFMFS020 1796.50

MANUAL KOIL-KIT™ COIL PACK WITH SERIES 78BL QUARTER TURN BALANCING BALL VALVES
Expected Without PT Ports With PT Ports

Nominal Flow Control
Range (GPM) Based Valve Size
on Manual Valve (78U Outlet
Size (Publication Size &
08.16) or Auto Balancing
Cartridge Flow rates Nominal Kit Valve Size Price Price
Kit Description (Publication 08.34) Size Inlet) Reference Figure String Each Reference Figure String Each
0.4 – 5.3 ½ ½ K9TAFAF00000AFAM0LAMAF000 $480.00 K9TAFAF00000AFAM0LAMAF020 $667.50
0.9 - 12.5 ¾ ½ K9TBFBF00000BFAM0LAMBF000 513.00 K9TBFBF00000BFAM0LAMBF020 700.50
78T Fem X Fem, 0.9 – 12.5 ¾ ¾ K9TBFBF00000BFBM0LBMBF000 513.00 K9TBFBF00000BFBM0LBMBF020 700.50
78U Fem x Male 1.6 – 19.3 1 ½ K9TCFCF00000CFAM0LAMCF000 714.00 K9TCFCF00000CFAM0LAMCF020 901.50
Union,
1.6 – 19.3 1 ¾ K9TCFCF00000CFBM0LBMCF000 714.00 K9TCFCF00000CFBM0LBMCF020 901.50
78BL Male
Union x Fem 1.6 – 19.3 1 1 K9TCFCF00000CFCM0LCMCF000 714.00 K9TCFCF00000CFCM0LCMCF020 901.50
without hoses 2.1 – 30.5 1¼ 1¼ K9TDFDF00000DFDM0LDMDF000 893.50 K9TDFDF00000DFDM0LDMDF020 1081.00
2.7 – 45.4 1½ 1½ K9TEFEF00000EFEM0LEMEF000 1241.50 K9TEFEF00000EFEM0LEMEF020 1429.00
6.2 – 85.0 2 2 K9TFFFF00000FFFM0LFMFF000 1572.00 K9TFFFF00000FFFM0LFMFF020 1759.50
0.4 – 5.3 ½ ½ K9TAFAF0AEAEAFAM0LAMAF000 674.00 K9TAFAF0AEAEAFAM0LAMAF020 861.50
78T Fem x Fem
w/ 2’ Male x 0.9 - 12.5 ¾ ½ K9TBFBF0BEBEBFAM0LAMBF000 804.00 K9TBFBF0BEBEBFAM0LAMBF020 991.50
Male Union 0.9 – 12.5 ¾ ¾ K9TBFBF0BEBEBFBM0LBMBF000 804.00 K9TBFBF0BEBEBFBM0LBMBF020 991.50
Hose, 1.6 – 19.3 1 ½ K9TCFCF0CECECFAM0LAMCF000 1172.00 K9TCFCF0CECECFAM0LAMCF020 1359.50
78U Fem x
1.6 – 19.3 1 ¾ K9TCFCF0CECECFBM0LBMCF000 1172.00 K9TCFCF0CECECFBM0LBMCF020 1359.50
Male Union w/
2’ Male x Male 1.6 – 19.3 1 1 K9TCFCF0CECECFCM0LCMCF000 1172.00 K9TCFCF0CECECFCM0LCMCF020 1359.50
Union Hose, 2.1 – 30.5 1¼ 1¼ K9TDFDF0DEDEDFDM0LDMDF000 1722.50 K9TDFDF0DEDEDFDM0LDMDF020 1910.00
78BL Male 2.7 – 45.4 1½ 1½ K9TEFEF0EEEEEFEM0LEMEF000 2350.50 K9TEFEF0EEEEEFEM0LEMEF020 2538.00
Union x Fem
6.2 – 85.0 2 2 K9TFFFF0FEFEFFFM0LFMFF000 3531.00 K9TFFFF0FEFEFFFM0LFMFF020 3718.50

Automatic Koil-Kit™ Coil Pack with Series 76V Automatic Union Inlet Balancing Valve with Cartridges
AUTOMATIC KOIL-KIT™ COIL PACK WITH SERIES 76V AUTOMATIC UNION INLET BALANCING VALVE WITH CARTRIDGES
Nominal Flow Range Without PT Port Extensions

(Valve Cartridge or
GPM) Based on Expected Handle Extensions With PT Ports and Handle Extensions
Manual Valve Control Reference Figure String Reference Figure String
Size (Publication Valve Size Replace xx with applicable Replace xx with applicable
08.16) or Auto (78U Outlet cartridge code for pressure cartridge code for pressure
Cartridge Flow rates Nominal Kit and Valve range and flow setting as Price range and flow setting as Price
Kit Description (Publication 08.34) Size Size Inlet) per Publication 08.34 Each per Publication 08.34 Each
78Y Sweat x 0.1 – 10.8 ½ ½ K9YASAS00000ASAM04AMASxx00 $571.50 K9YASAS00000ASAM04AMASxx20 $759.00
Sweat, 0.1 – 10.8 ¾ ¾ K9YBSBS00000BSBM04BMBSxx00 608.50 K9YBSBS00000BSBM04BMBSxx20 796.00
78U Sweat x
Male Union, 0.1 – 10.8 1 1 K9YCSCS00000CSCM04CMCSxx00 1136.50 K9YCSCS00000CSCM04CMCSxx20 1324.00
76V Male Union 1 High
3.0 – 50.0 1 K9YCSCS00000CSCM04CM3Sxx00 1136.50 K9YCSCS00000CSCM04CM3Sxx20 1324.00
x Sweat Flow Body
Automatic valve 3.0 – 50.0 1¼ 1¼ K9YDSDS00000DSDM0DDMDSxx00 1502.50 K9YDSDS00000DSDM0DDMDSxx20 1690.00
with cartridge
3.0 – 50.0 1½ 1½ K9YESES00000ESEM0DEMESxx00 1917.50 K9YESES00000ESEM0DEMESxx20 2105.00
(need to choose
cartridge) and 3.0 – 50.0 2 2 K9YFSFS00000FSFM0DFMFSxx00 2243.50 K9YFSFS00000FSFM0DFMFSxx20 2431.00
without hoses
78Y Fem x Fem, 0.1 – 10.8 ½ ½ K9YAFAF00000AFAM04AMAFxx00 528.50 K9YAFAF00000AFAM04AMAFxx20 716.00
78U Fem x Male 0.1 – 10.8 ¾ ¾ K9YBFBF00000BFBM04BMBFxx00 576.50 K9YBFBF00000BFBM04BMBFxx20 764.00
Union,
76V Male Union 0.1 – 10.8 1 1 K9YCFCF00000CFCM04CMCFxx00 751.00 K9YCFCF00000CFCM04CMCFxx20 938.50
x Fem 1 High
3.0 – 50.0 1 K9YCFCF00000CFCM04CM3Fxx00 1124.00 K9YCFCF00000CFCM04CM3Fxx20 1311.50
Automatic valve Flow Body
with cartridge 3.0 – 50.0 1¼ 1¼ K9YDFDF00000DFDM0DDMDFxx00 1483.00 K9YDFDF00000DFDM0DDMDFxx20 1670.50
(need to choose
3.0 – 50.0 1½ 1½ K9YEFEF00000EFEM0DEMEFxx00 1898.50 K9YEFEF00000EFEM0DEMEFxx20 2086.00
cartridge) and
without hoses 3.0 – 50.0 2 2 K9YFFFF00000FFFM0DFMFFxx00 2224.50 K9YFFFF00000FFFM0DFMFFxx20 2412.00
78Y Fem x Fem 0.1 – 10.8 ½ ½ K9YAFAF0AEAEAFAM04AMAFxx00 722.50 K9YAFAF0AEAEAFAM04AMAFxx20 910.00
w/ 2’ connected 0.1 – 10.8 ¾ ¾ K9YBFBF0BEBEBFBM04BMBFxx00 867.50 K9YBFBF0BEBEBFBM04BMBFxx20 1055.00
hose,
78U Fem x 0.1 – 10.8 1 1 K9YCFCF0CECECFCM04CMCFxx00 1209.00 K9YCFCF0CECECFCM04CMCFxx20 1396.50
Male Union w/ 1 High
3.0 – 50.0 1 K9YCFCF0CECECFCM04CM3Fxx00 1582.00 K9YCFCF0CECECFCM04CM3Fxx20 1769.50
2’ connected Flow Body
hose, 3.0 – 50.0 1¼ 1¼ K9YDFDF0DEDEDFDM0DDMDFxx00 2312.00 K9YDFDF0DEDEDFDM0DDMDFxx20 2499.50
76V Male
3.0 – 50.0 1½ 1½ K9YEFEF0EEEEEFEM0DEMEFxx00 3007.50 K9YEFEF0EEEEEFEM0DEMEFxx20 3195.00
Union x Fem
Automatic valve
with cartridge 3.0 – 50.0 2 2 K9YFFFF0FEFEFFFM0DFMFFxx00 4183.50 K9YFFFF0FEFEFFFM0DFMFFxx20 4371.00
(need to choose
cartridge)
78T Fem x Fem, 0.1 – 10.8 ½ ½ K9TAFAF00000AFAM04AMAFxx00 486.00 K9TAFAF00000AFAM04AMAFxx20 673.50
78U Fem x Male 0.1 – 10.8 ¾ ¾ K9TBFBF00000BFBM04BMBFxx00 532.50 K9TBFBF00000BFBM04BMBFxx20 720.00
Union,
76V Male Union 0.1 – 10.8 1 1 K9TCFCF00000CFCM04CMCFxx00 680.50 K9TCFCF00000CFCM04CMCFxx20 868.00
x Fem 1 High
3.0 – 50.0 1 K9TCFCF00000CFCM04CM3Fxx00 1053.50 K9TCFCF00000CFCM04CM3Fxx20 1241.00
Automatic valve Flow Body
with cartridge 3.0 – 50.0 1¼ 1¼ K9TDFDF00000DFDM0DDMDFxx00 1399.50 K9TDFDF00000DFDM0DDMDFxx20 1587.00
(need to choose
3.0 – 50.0 1½ 1½ K9TEFEF00000EFEM0DEMEFxx00 1766.00 K9TEFEF00000EFEM0DEMEFxx20 1953.50
cartridge) and
without hoses 3.0 – 50.0 2 2 K9TFFFF00000FFFM0DFMFFxx00 2069.00 K9TFFFF00000FFFM0DFMFFxx20 2256.50
78T Fem x Fem 0.1 – 10.8 ½ ½ K9TAFAF0AEAEAFAM04AMAFxx00 680.00 K9TAFAF0AEAEAFAM04AMAFxx20 867.50
w/ 2’ connected 0.1 – 10.8 ¾ ¾ K9TBFBF0BEBEBFBM04BMBFxx00 823.50 K9TBFBF0BEBEBFBM04BMBFxx20 1011.00
hose,
78U Fem x 0.1 – 10.8 1 1 K9TCFCF0CECECFCM04CMCFxx00 1138.50 K9TCFCF0CECECFCM04CMCFxx20 1326.00
Male Union w/ 1 High
3.0 – 50.0 1 K9TCFCF0CECECFCM04CM3Fxx00 1511.50 K9TCFCF0CECECFCM04CM3Fxx20 1699.00
2’ connected Flow Body
hose, 3.0 – 50.0 1¼ 1¼ K9TDFDF0DEDEDFDM0DDMDFxx00 2228.50 K9TDFDF0DEDEDFDM0DDMDFxx20 2416.00
76V Male Union
3.0 – 50.0 1½ 1½ K9TEFEF0EEEEEFEM0DEMEFxx00 2875.00 K9TEFEF0EEEEEFEM0DEMEFxx20 3062.50
x Fem
Automatic valve
with cartridge 3.0 – 50.0 2 2 K9TFFFF0FEFEFFFM0DFMFFxx00 4028.00 K9TFFFF0FEFEFFFM0DFMFFxx20 4215.50
(need to choose
cartridge)

NOTE: Replace “xx” with applicable cartridge code for pressure range and flow setting as per Publication 08.34.

AUTOMATIC KOIL-KIT™ COIL PACK WITH SERIES 76V AUTOMATIC UNION INLET BALANCING VALVE WITH CARTRIDGES
Nominal Flow Range Without PT Port Extensions or

(Valve Cartridge Handle Extensions With PT Ports and Handle Extensions
GPM) Based on Expected
Manual Valve Control Reference Figure String Reference Figure String
Size (Publication Valve Size Replace xx with applicable Replace xx with applicable
08.16) or Auto (78U Outlet cartridge code for pressure cartridge code for pressure
Cartridge Flow rates Nominal Kit and Valve range and flow setting as Price range and flow setting as Price
Kit Description (Publication 08.34) Size Size Inlet) per Publication 08.34 Each per Publication 08.34 Each
78T Sweat x 0.1 – 10.8 ½ ½ K9TASAS00000ASAM04AMASxx00 $529.00 K9TASAS00000ASAM04AMASxx20 $716.50
Sweat, 0.1 – 10.8 ¾ ¾ K9TBSBS00000BSBM04BMBSxx00 564.50 K9TBSBS00000BSBM04BMBSxx20 752.00
78U Sweat x
Male Union, 0.1 – 10.8 1 1 K9TCSCS00000CSCM04CMCSxx00 1066.00 K9TCSCS00000CSCM04CMCSxx20 1253.50
76V Male Union 1 High
3.0 – 50.0 1 K9TCSCS00000CSCM04CM3Sxx00 1066.00 K9TCSCS00000CSCM04CM3Sxx20 1253.50
x Sweat Flow Body
Automatic valve 3.0 – 50.0 1¼ 1¼ K9TDSDS00000DSDM0DDMDSxx00 1419.00 K9TDSDS00000DSDM0DDMDSxx20 1606.50
with cartridge
3.0 – 50.0 1½ 1½ K9TESES00000ESEM0DEMESxx00 1785.00 K9TESES00000ESEM0DEMESxx20 1972.50
(need to choose
cartridge) and 3.0 – 50.0 2 2 K9TFSFS00000FSFM0DFMFSxx00 2088.00 K9TFSFS00000FSFM0DFMFSxx20 2275.50
without hoses

NOTE: Replace “xx” with applicable cartridge code for pressure range and flow setting as per Publication 08.34.

Series 79C Koil-Kit™ Coil Pack
Series 79C SERIES 79C KOIL-KIT™ COIL PACK

KOIL-KIT™ COIL PACK inches Part Code List Price
Refer to publication 08.35 2½ K02479C001 $3603.00
3 K03079C001 4552.00
4 K04079C001 5608.00
6 K06079C001 10948.00
Series 79D Koil-Kit™ Coil Pack with Style 925 Drain/Air Vent Assembly
Series 79D SERIES 79D KOIL-KIT™ COIL PACK

WITH STYLE 925 DRAIN/AIR VENT ASSEMBLY

KOIL-KIT™ COIL PACK WITH inches Part Code List Price
STYLE 925 DRAIN/AIR VENT
2½ K02479D001 $3738.00
ASSEMBLY
3 K03079D001 4732.00
4 K04079D001 5836.50
6 K06079D001 11222.00
Style 925 – Drain/Air Vent Assembly
Style 925 STYLE 925 – DRAIN/AIR VENT ASSEMBLY
Approx.
DRAIN/AIR VENT ASSEMBLY Size Wgt. Ea.
Refer to publication 08.35 Actual Outside
Nominal Size Diameter
inches inches lb Victaulic Part Code Price Each
2½ 2.875 6.1 K0249250E0 $147.00
3 3.500 7.4 K0309250E0 193.50
4 4.500 7.5 K0409250E0 246.50
6 6.625 11.6 K0609250E0 274.50

Optional Tailpieces
Victaulic® Optional OPTIONAL TAILPIECES
Nominal Size Female Tailpiece Sweat Tailpiece Male Tailpiece

Tailpieces Victaulic Victaulic Victaulic
Refer to publication 08.30 inches Part Code Price Each Part Code Price Each Part Code Price Each
½ x ½ P00478Y304 $18.00 P00478Y504 * $12.00 P00478U404 * $31.50
¾ x ½ P00678Y304 * 31.50 P00678Y504 * 18.00 P00678U404 * 43.50 NR
¾ P00678Y306 25.00 P00678Y506 * 19.00 P00678U406 * 46.50 NR
Female Sweat Tailpiece 1 x ½ P00678Y304 * 31.50 P00678Y504 * 18.00 P00678U404 * 43.50 NR
Tailpiece ¾ P00678Y306 * 25.00 P00678Y506 * 19.00 P00678U406 * 46.50 NR
1 P00678Y310 58.50 P00678Y510 * 17.50 P00678U410 * 56.50
1¼ x ½ – – – – P01278U404 * 71.50
¾ P01278Y306 * 58.50 P01278Y506 * 41.00 P01278U406 * 75.50
1 P01278Y310 * 58.50 P01278Y510 * 43.50 P01278U410 * 78.50 NR
1¼ P01278Y312 48.00 P01278Y512 * 40.50 P01278U412 * 87.00 NR
Male Tailpiece 1½ x ½ – – – – P01278U404 * 71.50
¾ P01278Y306 * 58.50 P01278Y506 * 41.00 P01278U406 * 75.50
1 P01278Y310 * 58.50 P01278Y510 * 43.50 P01278U410 * 78.50 NR
1¼ P01278Y312 * 48.00 P01278Y512 * 40.50 P01278U412 * 87.00 NR
1½ P01278Y314 131.50 P01278Y514 * 40.50 P01278U414 * 98.00
2 x 1 – – – – P02078U410 * 106.50
1¼ P02078Y312 * 105.50 P02078Y512 * 47.50 P02078U412 * 111.50
1½ P02078Y314 * 98.50 P02078Y514 * 49.00 P02078U414 * 114.00
2 P02078Y320 98.50 P02078Y520 * 46.50 P02078U420 * 123.00
See Partcode Configuration Guide.
* If this tailpiece is being substituted for a factory-provided female tailpiece, a union collar is also needed.
NR
Non-returnable
Union Collar
Union Collar UNION COLLAR
Valve Size
Refer to publication 08.30 inches Victaulic Part Code Price Each
½ P00478Y204 $22.00
¾–1 P00678Y206 22.00
1¼ – 1½ P01278Y212 54.00
2 P02078Y220 98.50
Bypass Tee
Bypass Tee BYPASS TEE
Valve Size
Refer to publication 08.30 inches Victaulic Part Code Price Each
½ P004799500 $65.50
¾ P006799500 91.50
1 P010799500 143.00
1¼ P012799500 386.00
1½ P014799500 386.00
2 P020799500 548.50

Koil-Kit™ Coil Pack Components
Series 78Y – Strainer/Ball Valve Combination
Series 78Y SERIES 78Y
Nominal
STRAINER/BALL VALVE Size Female x Female Sweat x Sweat
COMBINATION inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Refer to publication 08.30 ½ V00478YBFF $226.00 V00478YBSS $226.00
¾ V00678YBFF 235.50 V00678YBSS 235.50
1 V01078YBFF 368.00 V01078YBSS 368.00
1¼ V01278YBFF 425.00 V01278YBSS 425.00
1½ V01478YBFF 661.50 V01478YBSS 661.50
2 V02078YBFF 776.50 V02078YBSS 776.50
Series 78T – Ball Valve Union Combination
Series 78T SERIES 78T
Nominal
BALL VALVE UNION Size Female x Female Sweat x Sweat
COMBINATION inches Victaulic Part Code Price Each Victaulic Part Code Price Each
Refer to publication 08.30 ½ V00478TBFF $183.50 V00478TBSS $183.50
¾ V00678TBFF 191.50 V00678TBSS 191.50
1 V01078TBFF 297.50 V01078TBSS 297.50
1¼ V01278TBFF 341.50 V01278TBSS 341.50
1½ V01478TBFF 529.00 V01478TBSS 529.00
2 V02078TBFF 621.00 V02078TBSS 621.00
Series 78U – Union Port Fitting
Series 78U SERIES 78U
Nominal
UNION PORT FITTING Size Female x Male Union Sweat x Male Union
Refer to publication 08.30 inches Victaulic Part Code Price Each Victaulic Part Code Price Each
½ V00478UUFM $76.00 V00478UUSM $76.00
¾ V00678UUFM 86.00 V00678UUSM 86.00
1 V01078UUFM 118.00 V01078UUSM 118.00
1¼ V01278UUFM 165.00 V01278UUSM 165.00
1½ V01478UUFM 183.50 V01478UUSM 183.50
2 V02078UUFM 287.00 V02078UUSM 287.00

Coil Hose
Coil Hose COIL HOSE
Male Thread/ Male Thread/

Refer to publication 08.30 Size Length Female NPT Swivel Male NPT Union Male Thread/Sweat
Price Price
inches Part Code Each Part Code Each Part Code Price
12 FAR2799XEF $60.50 FAR2799XEM $68.50 FAR2799XES $60.50
18 FAR9799XEF 65.50 FAR9799XEM 72.00 FAR9799XES 65.50
½
24 FA40799XEF 70.50 FA40799XEM 76.00 FA40799XES 70.50
36 FM29799XEF 86.00 FM29799XEM 86.00 FM29799XES 86.00
¾
24 FV47799XEF 124.50 FV47799XEM 124.50 FV47799XES 124.50
12 FK27799XEF 202.00 FK27799XEM 183.50 FK27799XES 202.00
1
24 FL01799XEF 208.00 FL01799XEM 190.50 FL01799XES 208.00
12 FB05799XEF 277.50 FB05799XEM 273.50 FB05799XES 277.50
1¼
24 FN40799XEF 373.50 FN40799XEM 393.50 FN40799XES 373.50
36 FJ96799XEF 399.50 FJ96799XEM 416.00 FJ96799XES 399.50
1½
18 FAD7799XEF 916.50 FAD7799XEM 948.50 FAD7799XES 916.50
2
24 FK88799XEF 927.50 FK88799XEM 958.50 FK88799XES 927.50
Series 78Y and 78T Handle Extension
Handle Extension HANDLE EXTENSION
Nominal Size 2” Handle Extension 4” Handle Extension

SERIES 78Y AND 78T Victaulic Part Victaulic Part
Refer to publication 08.30 Series inches Code Price Each Code Price Each
½–1 P00478Y2HL $50.00 NR P00478Y4HL $77.00
78Y 1¼ – 1½ P01278Y2HL 66.00 NR P01278Y4HL 96.50
2 P02078Y2HL 77.00 NR P02078Y4HL 96.50
½–¾ P00478Y2HL 50.00 NR P00478Y4HL 77.00
78T 1 – 1¼ P01278Y2HL 66.00 NR P01278Y4HL 96.50
1½ – 2 P02078Y2HL 77.00 NR P02078Y4HL 96.50
NR
Non-returnable

Replacement O-Rings
Replacement O-Rings Series 78Y, 78T 78U, 78K End Face

Nominal Size O-Ring Series 78Y Strainer O-Ring
Victaulic Part Victaulic Part
inches Code * Price Each Code * Price Each
½ P004799ORG $3.00 G00478YGSK $2.00 NR
¾–1 P006799ORG 3.00 G00678YGSK 2.00
1¼ – 1½ P012799ORG 3.00 G01278YGSK 2.00
2 P020799ORG 3.00 G02078YGSK 2.00
NR
Non-returnable
* The part codes listed in this column represent one (1) O-ring. However, O-rings are only sold in multiples of ten (10) and must
be ordered in multiples of ten (10).
Hose Adapter Replacement Parts
Hose Adapter Size Male Adapter Female Adapter Sweat Adapter O-Rings
Replacement Parts inches Part Code
Price
Each Part Code
Price
Each Part Code
Price
Each Part Code *
Price
Each
Refer to publication 08.30 ½ P004799MOR $24.00 P004799FOR $24.00 P004799SOR $24.00 K004799HOR $24.00
¾ P006799MOR 34.00 P006799FOR 34.00 P006799SOR 34.00 K006799HOR 34.00
1 P010799MOR 80.00 P010799FOR 80.00 P010799SOR 80.00 K010799HOR 80.00
1¼ P012799MOR 116.00 P012799FOR 116.00 P012799SOR 116.00 K012799HOR 116.00
1½ P014799MOR 166.50 P014799FOR 166.50 P014799SOR 166.50 K014799HOR 166.50
2 P020799MOR 257.50 P020799FOR 257.50 P020799SOR 257.50 K020799HOR 257.50
* The part codes listed in this column represent one (1) O-ring. However, O-rings are only sold in multiples of ten (10) and must
be ordered in multiples of ten (10).
Port Extender
Port Extender Nominal Size

SERIES 78Y, 78T, AND 78U 2 P01278Y2XT $31.50
Refer to publication 08.30 4 P04378Y0XT 175.50
Able to be used on all sizes ½ – 2”.

Differential Pressure Controllers
TA Series 793 – Threaded Ends
Differential Pressure Controllers

TA Series 793 TA SERIES 793 DIFFERENTIAL PRESSURE CONTROLLER – (½ – 1” – 1.45 – 8.70 PSI; 1¼ – 2” – 2.90 – 11.6 PSI) DIFFERENTIAL
PRESSURE RANGE
Approx.
STAP DIFFERENTIAL PRESSURE Size Wgt. Ea. Series 793 (Threaded)
CONTROLLER –
Actual Differential
THREADED END Outside Pressure
Refer to publication 08.29 Nominal Size Diameter Range Victaulic Part
inches inches lb psi Number IMI TA Code Price Each
½ 0.840 2.4 1.45 – 8.70 V004793CBV 52 266-015 $704.00
¾ 1.050 2.6 1.45 – 8.70 V006793CBV 52 266-020 714.50
1 1.315 2.9 1.45 – 8.70 V010793CBV 52 266-025 725.50
1¼ 1.660 5.7 2.90 – 11.6 V012793CBV 52 266-032 940.00
1½ 1.900 6.4 2.90 – 11.6 V014793CBV 52 266-040 1086.50
2 2.375 7.7 2.90 – 11.6 V020793CBV 52 266-050 1291.50
NOTE: Capillary tubes included but not connected.
TA Series 794 – Flanged Ends
TA Series 794 TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – SPRING OPTION 1 (2.9 – 11.6 PSI) DIFFERENTIAL PRESSURE RANGE
Approx.
STAP DIFFERENTIAL PRESSURE Size Wgt. Ea. Series 794 (Flanged)
CONTROLLER – Actual Differential
FLANGED END Outside Pressure
(CLASS 150, ASME/ANSI B16.42) Nominal Size Diameter Range Victaulic Part
2½ 2.875 46.3 2.9 – 11.6 V024794116 52 266-065 $5212.50
3 3.500 52.9 2.9 – 11.6 V030794116 52 266-080 5497.50
4 4.500 72.8 2.9 – 11.6 V040794116 52 266-090 7377.00
TA SERIES 794 DIFFERENTIAL PRESSURE CONTROLLER – SPRING OPTION 2 (5.8 – 23.2) PSI DIFFERENTIAL PRESSURE RANGE
Approx.
Size Wgt. Ea. Series 794 (Flanged)
Actual Differential
Outside Pressure
Nominal Size Diameter Range Victaulic Part
2½ 2.875 46.3 5.8 – 23.2 V024794223 52-266-165 $5613.00
3 3.500 52.9 5.8 – 23.2 V030794223 52-266-180 6013.00
4 4.500 72.8 5.8 – 23.2 V040794223 52-266-190 8058.00
NOTE: Capillary tubes included and connected.

TA Series 782 Bypass Valve
TA Series 782 SERIES 782 – TA BYPASS VALVE

TA BYPASS VALVE inches Part Code Code List Price
Refer to publication 08.57 ½ V004782BPV 52-198-715 $376.50
¾ V006782BPV 52-198-720 472.00
1 V010782BPV 52-198-725 579.50
1¼ V012782BPV 52-198-732 736.00
TA Series 7PR
TA Series 7PR TA SERIES 7PR DIFFERENTIAL PRESSURE CONTROLLER – 1 – 7 PSI; 4 – 21 PSI, OR 12 – 58 PSI DIFFERENTIAL PRESSURE RANGE
Approx.
DIFFERENTIAL PRESSURE Size Wgt. Ea. TA Series 7PR
CONTROLLER Actual Differential
Refer to publication 08.46 Outside Pressure
Nominal Size Diameter Range Victaulic
inches inches lb psi Part Number IMI TA Code Price Each
1–7 V0247PR007 23121 24 11065 $7899.00
2½ 2.875 39.7 4 – 21 V0247PR021 23121 24 21065 7899.00
12 – 58 V0247PR058 23121 24 31065 7899.00
1–7 V0307PR007 23121 24 11080 8688.00
3 3.500 46.3 4 – 21 V0307PR021 23121 24 21080 8688.00
12 – 58 V0307PR058 23121 24 31080 8688.00
1–7 V0407PR007 23121 24 11100 11070.50
4 4.500 70.5 4 – 21 V0407PR021 23121 24 21100 11956.00
12 – 58 V0407PR058 23121 24 31100 11070.50
1–7 V0507PR007 23121 24 11125 15864.50
5 5.563 92.6 4 – 21 V0507PR021 23121 24 21125 15864.50
12 – 58 V0507PR058 23121 24 31125 15864.50
1–7 V0607PR007 23121 24 11150 21722.50
6 6.625 123.5 4 – 21 V0607PR021 23121 24 21150 21722.50
12 – 58 V0607PR058 23121 24 31150 21722.50
1–7 V0807PR007 23121 24 11200 34800.50
8 8.625 183.0 4 – 21 V0807PR021 23121 24 21200 34800.50
12 – 58 V0807PR058 23121 24 31200 34681.50

TA Series 7DA
TA Series 7DA TA SERIES 7DA COMPACT DIFFERENTIAL PRESSURE CONTROLLER
Approx. Wgt.
COMPACT DIFFERENTIAL Nominal Size Ea. Pressure Range Pressure Range Victaulic Part
inches lb psi kPA Number Price Each
PRESSURE CONTROLLER
Refer to publication 08.47 .73 – 4.35 5 – 30 V0047DAF03 $2440.00
1.45 – 8.70 10 – 60 V0047DAF06 2440.00
½ Female 4.2
1.45 – 14.5 10 – 100 V0047DAF10 2440.00
8.7 21.76 60 – 150 V0047DAF15 2440.00
.73 – 4.35 5 – 30 V0067DAF03 2564.00
1.45 – 8.70 10 – 60 V0067DAF06 2564.00
¾ Female 4.6
1.45 – 14.5 10 – 100 V0067DAF10 2564.00
8.7 – 21.76 60 – 150 V0067DAF15 2564.00
.73 – 4.35 5 – 30 V0107DAF03 2709.50
1.45 – 8.70 10 – 60 V0107DAF06 2709.50
1 Female 7.5
1.45 – 14.5 10 – 100 V0107DAF10 2709.50
8.7 21.76 60 – 150 V0107DAF15 2709.50
.73 – 4.35 5 – 30 V0127DAF03 2713.50
1.45 – 8.70 10 – 60 V0127DAF06 2713.50
1¼ Female 7.9
1.45 – 14.5 10 – 100 V0127DAF10 2713.50
8.7 21.76 60 – 150 V0127DAF15 2713.50
.73 – 4.35 5 – 30 V0147DAF03 3561.50
1.45 – 8.70 10 – 60 V0147DAF06 3561.50
1½ Female 15.4
1.45 – 14.5 10 – 100 V0147DAF10 3561.50
8.7 – 21.76 60 – 150 V0147DAF15 3561.50
.73 – 4.35 5 – 30 V0207DAF03 3962.00
1.45 – 8.70 10 – 60 V0207DAF06 3962.00
2 Female 16.3
1.45 – 14.5 10 – 100 V0207DAF10 3962.00
8.7 – 21.76 60 – 150 V0207DAF15 3962.00
Female NPT ends both sides
With .25” tubing
With .25” to G ⅛ body adapter
With .25” tubing adapter to G ¹⁄ thread nipple
With transition nipple (G ¹⁄ to drain kit connector)
TA Series 793 Insulation Kits
TA Series 793 TA SERIES 793 – INSULATION KITS
Size TA Series 793 Insulation Kit

INSULATION KITS Nominal Size
Refer to publication 08.29 inches Victaulic Part Number IMI TA Code Price Each
½–1 P006793INS 52 265-225 $180.50 NR
1¼ – 2 P012793INS 52 265-250 212.50
NR
Non-returnable

TA Series 793 Differential Pressure Control Valve & TA Series 787H Balancing Valve with Drain Kit
TA Series 793 Differential

Pressure Control Valve & TA
Series 787H Balancing Valve
with Drain Kit +
PRESSURE REDUCING KIT
Refer to publication 08.29 (TA Series 793) or
publication 08.16 (TA Series 787H)
TA SERIES 793 DIFFERENTIAL PRESSURE CONTROL VALVE & TA SERIES 787H BALANCING VALVE WITH DRAIN KIT

inches Part Code List Price
½ K004793CBV $946.00
¾ K006793CBV 969.50
1 K010793CBV 1033.50
1¼ K012793CBV 1357.00
1½ K014793CBV 1552.00
2 K020793CBV 1937.00

TA Series 7DA Compact Differential Pressure Valve & TA Series 787H Balancing Valve with Drain Kit
TA Series 7DA Compact

Differential Pressure Valve &
TA Series 787H Balancing
Valve with Drain Kit +
PRESSURE REDUCING KIT

Refer to publication 08.47 (TA Series 7DA) or
publication 08.16 (TA Series 787H)
TA SERIES 7DA COMPACT DIFFERENTIAL PRESSURE VALVE & TA SERIES 787H BALANCING VALVE WITH DRAIN KIT
Nominal Size Pressure Range Pressure Range Victaulic

inches psi kPa Part Code List Price
.73 – 4.35 5 – 30 K0047DAF03 $2682.50
1.45 – 8.70 10 – 60 K0047DAF06 2682.50
½
1.45 – 14.5 10 – 100 K0047DAF10 2682.50
8.7 21.76 60 – 150 K0047DAF15 2682.50
.73 – 4.35 5 – 30 K0067DAF03 2819.50
1.45 – 8.70 10 – 60 K0067DAF06 2819.50
¾
1.45 – 14.5 10 – 100 K0067DAF10 2819.50
8.7 – 21.76 60 – 150 K0067DAF15 2819.50
.73 – 4.35 5 – 30 K0107DAF03 3015.50
1.45 – 8.70 10 – 60 K0107DAF06 3015.50
1
1.45 – 14.5 10 – 100 K0107DAF10 3015.50
8.7 21.76 60 – 150 K0107DAF15 3015.50
.73 – 4.35 5 – 30 K0127DAF03 3131.50
1.45 – 8.70 10 – 60 K0127DAF06 3131.50
1¼
1.45 – 14.5 10 – 100 K0127DAF10 3131.50
8.7 21.76 60 – 150 K0127DAF15 3131.50
.73 – 4.35 5 – 30 K0147DAF03 4028.00
1.45 – 8.70 10 – 60 K0147DAF06 4028.00
1½
1.45 – 14.5 10 – 100 K0147DAF10 4028.00
8.7 – 21.76 60 – 150 K0147DAF15 4028.00
.73 – 4.35 5 – 30 K0207DAF03 4608.00
1.45 – 8.70 10 – 60 K0207DAF06 4608.00
2
1.45 – 14.5 10 – 100 K0207DAF10 4608.00
8.7 – 21.76 60 – 150 K0207DAF15 4608.00

Differential Pressure Controller Accessories
Accessories DIFFERENTIAL PRESSURE CONTROLLER ACCESSORIES

Refer to publication 08.29 inches Description Part Code Code List Price
Capillary Tube and Extension Kit
– Capillary Tube P000793001 – $166.00 NR
– Capillary Extension Kit K002793001 – 510.00 NR
Capillary
Setting Tool
Capillary Tube Extension Kit
3 TA Series 793 P004793KEY 52-265-305 $1416.00 NR
5 TA Series 794 P030794KEY 52-265-304 1202.00
Handwheels
½–1 TA Series 793 P004793HDW – $406.50
1¼ – 2 TA Series 794 P012793HDW – 324.00 NR
NR
Non-returnable
Setting Tool
TA Series 793 TA Series 794

Plastic Plastic
Handwheel Handwheel
½ – 1” 1¼ – 2”

Balancing Instruments
Dongle for Slider Actuators 7CP and 7MP
Instruments
Dongle for Slider DONGLE FOR SLIDER ACTUATORS 7CP AND 7MP
Victaulic
Actuators 7CP and Part Code List Price
7MP P0007MPDON $629.50 NR
Refer to publication 08.16 NR
Non-returnable
TA Series 736 TA Link Differential Pressure Sensor
TA Series 736 TA SERIES 736 – TA LINK DIFFERENTIAL PRESSURE SENSOR
Range Victaulic IMI TA

TA LINK DIFFERENTIAL psi Part Code Code List Price
PRESSURE SENSOR 0–6 V000736000 52-010-004 $6850.00
Refer to publication 08.16 0 – 15 V000736001 52-010-010 6850.00
NOTE: For measuring probe, see spare parts in the Manual Balancing Valves section.
Universal Gauge Meter Conversion Kit
Universal Gauge Meter UNIVERSAL GAUGE METER CONVERSION KIT †
Victaulic IMI TA
Conversion Kit Part Code Code List Price
K000738100 30-763-562 $915.50 NR
† The kit includes 2 probes, necessary fittings, flow wheel and instruction sheet.
NR
Non-returnable

TA Series 734 SCOPE Balancing Instrument
TA Series 734 SCOPE BALANCING INSTRUMENT
Victaulic IMI TA
SCOPE BALANCING Description Part Code Code List Price
INSTRUMENT TA-SCOPE Premium V000734000 52-199-014 $31552.50
Refer to publication 08.16 TA-SCOPE HP Premium V000734001 52-199-114 +
TA-SCOPE V000734002 52-199-214 12763.00
TA-SCOPE HP V000734003 52-199-314 +
TA Series 734 SCOPE
TA Series 734 SCOPE Premium

Additional Equipment DP SENSOR UNIT (DPS-VISIO)
Pressure
Range Victaulic IMI TA
Description Version psi Part Code Code List Price
Standard 0 – 72.5 P000DPS001 52-199-971 $6130.00 NR
DP Sensor Unit (DpS-Visio)
High Pressure (HP) 0 – 145.0 P000DPS002 52-199-972 7281.50
NR
Non-returnable
MEASURING HOSE (FOR USE WITH SPP AND SPTP)
Length Victaulic IMI TA

Description inches Color Part Code Code List Price
Red P000734007 52-199-953 $742.50
Measuring Hose (For use with SPP and SPTP) 20
Blue P000734008 52-199-954 742.50
MEASURING HOSE WITH TWIN NEEDLE

Description inches Part Code Code List Price
Measuring Hose with Twin Needle 6 P000734013 52 199-999 $576.00
SAFETY PRESSURE PROBE, SAFETY PRESSURE AND TEMPERATURE PROBE AND DIGITAL TEMPERATURE SENSOR
Victaulic IMI TA
Description Part Code Code List Price
Safety Pressure Probe (SPP)
P000734005 52-199-951 $1240.00
(For use with Measuring Hoses and Extended Hoses)
Safety Pressure and Temperature Probe (SPTP)
P000734004 52-199-952 2967.00
(For use with Measuring Hoses and Extended Hoses)
Digital Temperature Sensor (DTS) P000734006 52-199-941 +

Additional Accessories MEASURING HOSE WITH SHUT-OFF VALVE
Description Length Victaulic IMI TA

feet Color Part Code Code List Price
Red P000734001 52-199-997 $2641.00
Measuring Hose with Shut-Off Valve 9.8
Blue P000734002 52-199-998 2641.00
MEASURING HOSE WITH MEASURING NEEDLE
Description Length Victaulic IMI TA

inches Color Part Code Code List Price
Measuring Hose with Measuring Needle (Angle) Red P000734010 311-074-61 $735.50
20
(Hose and needle can’t be disconnected) Blue P000734011 311-074-60 735.50
MEASURING NIPPLE

Description inches Part Code Code List Price
Measuring Nipple
(Extension: 0.24 in; 2.36 K000740012 52-179-006 $148.50 NR
Can be installed without draining the system)
NR
Non-returnable
MEASURING NEEDLE
Victaulic IMI TA
Measuring Needle (Angle) P000738100 307-635-62 $322.50 NR
NR
Non-returnable
CHUCKS
Victaulic IMI TA
Description Color Part Code Code List Price
Red P000734015 309-748-60 $233.00
Chucks (For older valves and TA-BVS)
Blue P000734016 309-748-61 233.00
FILTER
Victaulic IMI TA
P000734012 309-206-01 +
Filter (Spare part to measuring hoses)
P000734020 311-062-62 +

DC CABLE
Victaulic IMI TA
Description For Device Part Code Code List Price
DC Cable (To connect a device to the multi-charger) DpS-Visio P000734018 311-040-01 +

SECTION 8 – Plain End Couplings and Fittings
Plain End
Couplings and
Fittings

Products for Plain End IPS Steel Pipe
Style 99 Roust-A-Bout Coupling

Roust-A-Bout STYLE 99 – GRADE “E” OR “T” GASKET
Coupling PIPE Approx. With Grade “E” Plated
inches Wgt. Ea. or “T” Gasket Bolt & Nut
STYLE 99 Price Each
Nominal Outside Size
Refer to publication 14.02 Size Diameter lb Painted Galv. inches
1 1.315 1.7 $335.00 $431.50 ⅜ x 2
1½ 1.900 3.6 335.00 431.50 ½ x 2½
2 2.375 5.3 335.00 431.50 ⅝ x 3¼
2½ 2.875 5.7 335.00 431.50 ⅝ x 3¼
3 3.500 8.7 488.00 637.50 ¾ x 4¼
3½ 4.000 10.6 564.50 746.00 ¾ x 4¼
4 4.500 12.8 564.50 747.50 ¾ x 4¼
5 5.563 17.3 799.00 1063.00 ⅞ x 5
6 6.625 23.2 976.00 1322.50 1 x 6
8 8.625 37.2 1719.00 2298.50 ⅞ x 5
10 10.750 48.2 2230.50 2993.50 ⅞ x 5
12 12.750 60.0 2799.00 3858.00 1 x 6½
14 14.000 89.0 3841.00 4984.50 1 x 6½
16 16.000 105.0 5252.50 6704.50 1 x 6½
18 18.000 122.4 7007.00 9092.50 1 x 6½
Gaskets for Style 99 Couplings
Gaskets for Nominal Size Standard Gaskets

Style 99 inches
Standard Grade
“E” or “T”
Grade “L”
Silicone
Grade “A”
White Nitrile
Grade “O”
Fluoroelastomer
Couplings 1* $67.50 NR $226.50 $203.50 –
1½ * 75.50 NR 337.50 262.50 $754.00
2 $92.50 NR 468.50 600.50 882.50
2½ 98.50 NR 548.00 602.50 1707.00
3 107.00 NR 744.50 1902.00 1322.00
3½ 153.00 + + +
4 153.00 NR 1136.00 2527.00 1392.00
5 180.00 NR 1653.00 2665.50 2980.00
6 219.00 NR 2230.50 2740.00 4111.50
8 284.00 2152.50 + 5687.50
10 362.50 NR 3334.50 + +
12 440.00 NR 3489.00 + 6203.50
14 667.00 NR – – –
16 789.00 NR – – –
18 1257.00 NR – – –
* Style 77 gasket.
NR
Non-returnable

Plated Trackhead Bolts and Nuts
Plated Trackhead PLATED TRACKHEAD BOLTS AND NUTS
Bolt and Nut Size Bolt and Nut Size

Bolts and Nuts inches Price Each inches Price Each
⅜ x 2 $35.00 NR 1 x 3½ $93.00 NR
½ x 2½ 39.00 NR 5 87.50
2¾ 39.00 NR 5½ 107.00 NR
3 39.00 6 107.00 NR
3¼ 39.00 6½ 113.00 NR
⅝ x 2¾ 43.50 1⅛ x 4 143.00 NR
3¼ 43.50 NR 5½ 143.00 NR
3½ 45.50 NR 1¼ x 3½ 412.50
4 57.00 5½ 412.50
5 70.50 1⅜ x 5¾ 477.50
¾ x 4¼ 50.50 NR 1½ x 4½ 455.00
5 66.00 NR 5¾ 512.50
⅞ x 5 87.00 NR 1¾ x 6 893.50
5½ 92.50 NR 1⅞ x 6 1182.00
6½ 107.00 NR

NR
Non-returnable
No(s). 40-P, 42-P and 43-P Adapter Nipples
Adapter Nipples ADAPTER NIPPLES – PLAIN TO THREADED, PLAIN TO BEVELED, OR PLAIN TO GROOVED
No. 40-P Plain to Threaded Steel

Refer to publication 14.04 PIPE No. 42-P Plain to Beveled Steel
inches No. 43-P Plain to Grooved Steel
Approx. Price Each
Wgt. Each
No. 40-P Size End to End lb Black
1 3 0.9 $75.50
1½ 4 0.9 98.50
2 4 1.2 98.50
No. 42-P 2½ 4 1.9 +
3 4 2.5 137.00
4 6 5.4 221.00
6 6 9.5 578.00
No. 43-P

Plain End Fittings
No. 10-P – 90° Elbow, No. 11-P – 45° Elbow
Plain End Fittings PLAIN END FITTINGS – 90° ELBOW OR 45° ELBOW
Nominal 90° Elbow 45° Elbow

Refer to publication 14.04 Size No. 10-P No. 11-P
Weight Each Weight Each
1 0.6 $553.00 $612.50 0.6 $332.00 $380.50
No. 10-P 1½ 1.4 (sw) 653.00 716.00 1.0 (sw) 492.50 590.00
2 2.9 (sw) 972.50 1070.50 1.4 (sw) 1029.00 1265.50
2½ 3.9 (sw) 1136.50 1262.50 2.3 (sw) 1029.00 1265.50
3 6.2 (sw) 1180.00 1319.50 4.3 (sw) 1180.00 1328.50
3½ 7.0 (sw) + + 5.5 (sw) + +
4 9.9 (sw) 1335.50 1469.00 7.0 (sw) 1230.00 1360.00
No. 11-P 5 20.4 1534.50 3073.50 18.0 (sw) 1534.50 1806.00
6 20.4 1938.50 2358.50 11.9 1757.00 2062.50
8 42.0 (sw) 3638.00 4112.50 28.5 (sw) 2058.50 2908.00
10 50.0 (sw) 4630.00 5181.50 41.0 (sw) 2128.00 2657.50
12 156.0 (sw) 5152.00 7926.00 57.8 (sw) 3843.50 4525.00
No. 20-P – Tee, No. 61-P – Bull Plug
PLAIN END FITTINGS – TEE OR BULL PLUG
Nominal Tee Bull Plug

Size No. 20-P No. 61-P
No. 20-P inches lb Painted Galv. lb Electroplated
1 1.0 (sw) $617.00 $726.00 0.7 +
1½ 1.7 (sw) 794.00 912.00 1.2 $556.50
2 3.0 (sw) 794.00 889.50 2.0 556.50
No. 61-P 2½ 6.8 (sw) 1034.50 1170.00 3.0 556.50
3 9.0 (sw) 1586.50 1812.00 4.5 811.00
3½ 12.5 (sw) + + 6.0 +
4 11.9 2270.50 2838.00 7.5 1044.50
5 17.1 (sw) 3104.00 + 11.5 1836.00
6 29.5 2701.50 3101.00 17.0 2446.00
8 71.5 (sw) 3893.00 + 29.0 4590.00
10 116.0 (sw) + + 48.0 +
12 120.0 (sw) 7131.00 + 60.0 12316.50

No. 33-P – Wye, No. 30-P – Lateral
Plain End Fittings PLAIN END FITTINGS – WYE OR LATERAL
Nominal Wye Lateral

Refer to publication 14.04 Size No. 33-P No. 30-P
1 1.1 + + 3.5 + +
1½ 1.8 + + 3.5 $938.00 $1101.00
No. 33-P 2 2.9 + + 5.1 1070.50 1300.00
2½ 9.0 + + 9.3 1231.50 1448.00
3 8.5 + + 12.8 1461.00 1718.00
3½ 10.0 + + 20.0 + +
4 14.0 + + 19.0 2011.50 2251.50
5 21.6 + + 30.0 3408.50 4047.00
No. 30-P 6 31.2 + + 43.3 3516.50 4266.50
8 36.0 + + 92.0 5899.00 6944.50
10 52.0 + + 106.0 5898.00 10312.50
12 81.2 + + 167.0 10839.00 13938.50
Reducing Tees, True Ys, Crosses and Laterals are segmentally welded steel.
No. 35-P – Cross
PLAIN END FITTINGS – CROSS
Nominal Cross
Size No. 35-P
Approx. Price Each
Weight Each
No. 35-P 1 1.7 + +
1½ 3.5 + +
2 5.2 + +
2½ 5.4 + +
3 8.5 + +
3½ 9.0 + +
4 10.8 + +
5 20.0 + +
6 30.0 + +
8 66.4 + +
10 103.0 + +
12 158.0 + +

No. 53-P – Swaged Nipples
Swaged Nipples NO. 53-P – SWAGED NIPPLES *
Approx. Approx.
NO. 53-P Nominal Size Wgt. Each Price Each Nominal Size Wgt. Each Price Each
inches lb Electroplated inches lb Electroplated
1½ x 1 1.2 + 6 x 1 17.0 +
2 x 1 2.0 + 1½ 16.0 +
1½ 2.0 + 2 16.0 +
No. 53-P 2½ x 1 3.0 + 2½ 17.0 +
1½ 3.0 + 3 17.0 +
2 3.0 + 3½ 17.0 +
3 x 1 4.5 + 4 17.0 +
1½ 4.5 + 5 17.5 +
2 4.5 + 8 x 3 29.0 +
2½ 4.5 + 4 29.0 +
3½ x 3 6.8 + 5 29.0 +
4 x 1 7.5 + 6 29.0 +
1½ 7.5 + 10 x 3 1.2 +
2 7.5 + 4 2.0 +
2½ 7.5 + 6 2.0 +
3 7.5 + 8 3.0 +
3½ 7.5 + 12 x 6 3.0 +
5 x 2 11.5 + 8 3.0 +
3 11.5 + 10 4.5 +
4 11.5 +

* Galvanized and other sizes available - quoted on application.

No. 25-P – Reducing Tee
Reducing Tees NO. 25-P – REDUCING TEE
Reducing Tee
NO. 25-P Nominal Size No. 25-P
Refer to publication 14.04 Approx. Price Each
inches Wgt. Each
1½ x 1½ x 1 2.2 + +
2 x 2 x 1 2.9 + +
1½ 3.1 + +
No. 25-P 3 x 3 x 1 6.7 + +
1½ 6.9 $680.00 $835.00
2 7.1 + 1578.00
4 x 4 x 1 10.9 + +
1½ 11.1 + +
2 11.3 983.50 +
2½ 11.6 1011.00 +
3 11.9 1011.00 +
6 x 6 x 2 24.7 + +
3 25.4 1719.00 +
4 26.2 + 2211.00
8 x 8 x 2 42.0 + +
3 44.0 + +
4 46.0 + +
5 48.0 + +
6 50.0 2289.00 +
10 x 10 x 4 74.0 + +
6 78.0 + +
8 86.0 + +
12 x 12 x 6 112.0 + +
8 118.0 + +
10 130.0 + +

QuickVic™ SD Installation-Ready™ System
Style P07 Installation-Ready™ Coupling

Installation-Ready™ STYLE P07 INSTALLATION-READY™ COUPLING – GRADE “EHP” OR “T” GASKET
Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P07
Nom. Outside
Refer to publication 34.01 Size Dia. lb Painted DIFF ZN*
½ 0.840 1.2 $15.00 $18.00
¾ 1.050 1.3 17.00 20.50
1 1.315 1.4 19.00 23.00
1¼ 1.660 1.6 25.00 29.00
1½ 1.900 2.5 44.00 52.50
2 2.375 3.1 54.50 65.50
*DIFF ZN = Thermally diffused zinc-based coating
Style P08 Installation-Ready™ Slip Coupling
Installation-Ready™ STYLE P08 INSTALLATION-READY™ SLIP COUPLING – GRADE “EHP” OR “T” GASKET
Slip Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P08
Nom. Outside
½ 0.840 1.1 $17.00 $20.50
¾ 1.050 1.2 20.50 25.00
1 1.315 1.4 22.00 26.50
1¼ 1.660 1.6 26.50 32.00
1½ 1.900 2.4 47.00 56.50
2 2.375 3.0 62.00 75.00
Style P50 Installation-Ready™ Slip Coupling
Installation-Ready™ STYLE P50 INSTALLATION-READY™ REDUCING COUPLING – GRADE “EHP” OR “T” GASKET
Reducing Coupling PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
STYLE P50
Nom.
Refer to publication 34.01 Size lb Painted DIFF ZN*
¾ x ½ 1.7 $28.00 $34.00
1 x ¾ 1.9 35.50 43.50
¾ 2.6 46.00 54.50
1¼ x
1 2.3 49.00 58.00
¾ 3.1 60.00 71.50
1½ x 1 3.0 62.50 75.50
1¼ 3.0 64.50 77.00
1 3.8 86.50 102.50
2 x 1¼ 3.8 86.00 104.50
1½ 4.1 89.50 107.00

No. P10 Installation-Ready™ 90° Elbow
Installation-Ready™ NO. P10 INSTALLATION-READY™ 90° ELBOW – GRADE “EHP” OR “T” GASKET
FITTING COMPLETE †
90° Elbow PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P10
Nom. Outside
½ 0.840 1.8 $18.00 $22.00
¾ 1.050 2.1 20.50 25.00
1 1.315 2.4 26.00 31.00
1¼ 1.660 2.8 44.50 53.50
1½ 1.900 3.4 66.00 79.50
2 2.375 5.8 95.00 114.00
† Surcharge for fittings supplied without gasket. Contact Victaulic for pricing.
No. P11 Installation-Ready™ 45° Elbow
Installation-Ready™ NO. P11 INSTALLATION-READY™ 45° ELBOW – GRADE “EHP” OR “T” GASKET
45° Elbow PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P11
Nom. Outside
½ 0.840 0.7 $19.00 $20.50
¾ 1.050 2.4 21.00 23.50
1 1.315 2.7 32.00 23.50
1¼ 1.660 3.2 40.00 44.50
1½ 1.900 3.7 65.00 71.50
2 2.375 5.4 89.50 98.50
No. P20 Installation-Ready™ Tee
Installation-Ready™ NO. P20 INSTALLATION-READY™ TEE – GRADE “EHP” OR “T” GASKET
Tee PIPE Approx. Wgt. Ea. With Grade “EHP” or “T” Gasket
inches Price Each
NO. P20
Nom. Outside
½ 0.840 2.4 $23.50 $28.00
¾ 1.050 2.8 29.50 35.50
1 1.315 3.2 36.00 43.50
1¼ 1.660 3.7 56.50 68.00
1½ 1.900 4.6 100.00 120.00
2 2.375 7.0 130.50 156.50

No. P25 Installation-Ready™ Reducing Tee
Installation-Ready™ NO. P25 INSTALLATION-READY™ REDUCING TEE – GRADE “EHP” OR “T” GASKET
Reducing Tee Size Approx. With Grade “EHP” or “T” Gasket
inches Wgt. Each Price Each
NO. P25
Run x Branch lb Painted DIFF ZN*
¾ x ¾ x ½ 2.9 $58.00 $69.50
1 x 1 x ½ 3.1 68.50 77.00
¾ 3.3 64.50 77.00
1¼ x 1¼ x ½ 3.4 75.00 83.00
¾ 4.0 70.50 84.50
1 4.2 72.00 95.50
1½ x 1½ x ½ 4.4 83.00 93.00
¾ 4.6 80.00 155.50
1 4.8 89.50 87.00
1¼ 5.3 94.00 101.50
2 x 2 x ½ 6.4 85.50 110.50
¾ 7.0 130.00 107.00
1 7.5 132.00 158.50
1¼ 7.4 110.00 116.00
1½ 8.2 124.50 128.50
No. P27 Reducing on Run Tee
Reducing on Run Tee NO. P27 REDUCING ON RUN TEE – GRADE “EHP” OR “T” GASKET
NO. P27 Size Approx. With Grade “EHP” or “T” Gasket
Refer to publication 34.01 inches Wgt. Each Price Each
Run x Branch lb Painted DIFF ZN*
1 x ¾ x ¾ 3.4 $63.00 $71.00
1 3.5 30.00 70.50
1¼ x ¾ x 1¼ 4.0 35.00 78.00
1¼ x 1 x ¾ 3.8 63.50 76.50
1 3.8 65.00 78.00
1¼ 4.0 72.50 84.00
1½ x 1¼ x ¾ 4.0 75.00 86.00
1 4.4 87.50 92.00
No. P60 Cap
Cap NO. P60 CAP
PIPE Approx. Wgt.

NO. P60 inches Ea. Price Each
Refer to publication 34.01 Nom. Outside Sold in Box
Size Dia. lb Painted DIFF ZN* Quantities of
½ 0.840 0.4 $15.00 $18.00 10
¾ 1.050 0.5 20.50 25.00 8
1 1.315 0.7 26.00 31.00 6
1¼ 1.660 0.9 33.50 39.50 6
1½ 1.900 1.3 39.00 47.00 6
2 2.375 1.8 41.00 49.50 4

No. P60 Tapped Cap
Tapped Cap NO. P60 TAPPED CAP
PIPE
NO. P60 inches Approx. Wgt. Ea. Price Each
Size Dia. lb Painted Quantities of
½ 0.840 0.4 $34.50 6
¾ 1.050 0.5 35.00 4
1 1.315 0.7 40.00 4
1¼ 1.660 0.9 43.00 2
1½ 1.900 1.3 46.50 2
2 2.375 1.7 52.50 2
Replacement Retainer Rings
Replacement Retainer REPLACEMENT RETAINER RINGS
PIPE
Rings inches Sold in Bag Quantities of 50
Refer to publication 34.01 Nom. Outside
Size Dia. Price Per Bag
½ 0.840 $4.00
¾ 1.050 4.50
1 1.315 4.50
1¼ 1.660 5.50
1½ 1.900 9.50
2 2.375 12.00
No. P40 Threaded Adapter (Male NPT x Plain End)
Threaded Adapter NO. P40 THREADED ADAPTER (MALE NPT X PLAIN END)
PIPE Approx. Wgt. Ea.

(Male NPT x Plain inches Price Each
End) Nom. Outside Sold in Box
Size Dia. lb Coated Quantities of
NO. P40 ½ 0.840 0.3 $8.50 50
Refer to publication 34.01 ¾ 1.050 0.3 9.50 50
1 1.315 0.4 13.00 40
1¼ 1.660 0.6 16.00 30
1½ 1.900 0.7 19.50 25
2 2.375 0.9 23.50 15
No. P80 Threaded Adapter (Female NPT x Plain End)
Threaded Adapter NO. P80 THREADED ADAPTER (FEMALE NPT X PLAIN END)

(Female NPT x Plain inches Price Each
End) Nom. Outside Sold in Box
Size Dia. lb Painted Quantities of
NO. P80 ½ 0.840 0.6 $17.50 40
Refer to publication 34.01 ¾ 1.050 0.9 19.00 40
1 1.315 1.2 20.00 30
1¼ 1.660 1.6 25.00 22
1½ 1.900 2.1 28.50 18
2 2.375 2.9 36.00 13

No. P47 Straight Dielectric Adapter
Straight Dielectric NO. P47 STRAIGHT DIELECTRIC ADAPTER (PLAIN END X SWEAT)

Adapter inches
Nom. Outside
NO. P47
Size Dia. lb Price Each
½ 0.840 0.3 $70.50
¾ 1.050 0.5 83.00
1 1.315 0.7 113.50
1¼ 1.660 0.9 149.00
1½ 1.900 1.1 150.50
2 2.375 1.5 163.00
No. P97 90° Elbow Dielectric Adapter
90° Elbow Dielectric NO. P97 90° ELBOW DIELECTRIC ADAPTER (PLAIN END X SWEAT)

Adapter inches
Nom. Outside
NO. P97
Size Dia. lb Price Each
½ 0.840 0.3 $68.50
¾ 1.050 0.4 82.50
1 1.315 0.7 119.50
1¼ 1.660 1.0 156.00
1½ 1.900 1.2 157.00
2 2.375 1.7 169.00
No. P42 Close Nipple
Close Nipple NO. P42 CLOSE NIPPLE

NO. P42 inches
Size Dia. lb Price Each Quantities of
½ 0.840 0.2 $3.00 50
¾ 1.050 0.2 3.50 50
1 1.315 0.3 4.00 40
1¼ 1.660 0.5 5.00 30
1½ 1.900 0.7 7.00 25
2 2.375 1.0 9.50 15

Series P89 Full Port Ball Valve
Full Port Ball Valve SERIES P89 FULL PORT BALL VALVE
PIPE Approx. Price Each

SERIES P89 inches
Refer to publication 34.01 Nom. Outside With DZR Brass With Stainless With Locking
Size Dia. Wgt. Ea. Trim Steel Trim Handle
½ 0.840 0.6 $26.00 $39.00 $35.00
¾ 1.050 0.9 35.50 86.00 45.50
1 1.315 1.4 51.50 111.50 67.00
1¼ 1.660 2.0 95.50 257.00 95.50
1½ 1.900 3.7 140.00 299.50 157.00
2 2.375 5.4 232.50 456.50 221.50
HANDLE EXTENSION FOR SERIES P89 BALL VALVE
Valve Valve Inlet Size 2” Handle Extension 4” Handle Extension

Victaulic Part Victaulic Part
Series inches Code Price Each Code Price Each
½–¾ P00478Y2HL $50.00 NR P00478Y4HL $77.00
P89 1 – 1¼ P01278Y2HL 66.00 NR P01278Y4HL 96.50
1½ – 2 P02078Y2HL 77.00 NR P02078Y4HL 96.50
NOTE: The handle extensions listed above are the same ones used with the Series 78Y and Series 78T valve assemblies.
NR
Non-returnable
PC3110 Cut and Mark Tool
Cut and Mark Tool The PC3110 Cut and Mark Tool cuts and marks the pipe simultaneously, leaving two knurled markings
on each piece that clearly display proper insertion depth. Refer to Section 17 – Pipe Preparation Tools for
PC3110
prices and where to call for purchase information.

SECTION 9 – Vic-Press™ System, for Schedule 10S Stainless Steel Pipe
Vic-Press™ System
for Schedule 10S

Vic-Press™ System For Type 304 Schedule 10S Stainless Steel Pipe
Vic-Press™ System for Type 304 Schedule 10S Stainless Steel Pipe
™ Vic-Press™ System for Type 304 Schedule 10S

The Victaulic® Vic-Press™ System for joining Schedule 10S Type 304 (L) stainless
steel pipe provides a fast, easy, clean, and reliable means for joining ½ – 2”/15 – 50
mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule
10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI
Class 150 (except steam, according to standard temperature/pressure charts) for
water, oil, noncombustible gaseous and general chemical services and are
dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended
service.
The Vic-Press™ Schedule 10S System requires no flame or arc as with welding, and
no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into
the coupling and the coupling or fitting is pressed onto the pipe in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex
G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for
Grade H and Grade E seal materials. Unless specified otherwise, Grade “H” seals
will be applied. FM Approved to 175 psi/1200 kPa service for above ground sprinkler
systems.

WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
Installation Instructions” (I-P500) and the operating and maintenance manual
supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.

Style P500 Loose Seals
Style P500 STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.12 Standard Grade “H” HNBR or Optional Grade “O”
inches Grade “E” EPDM Seal Fluoroelastomer Seal
½ $15.50 NR $42.00
¾ 17.00 NR 48.00
1 21.00 NR 54.00
1½ 26.50 NR 106.00
2 36.50 NR 139.00
† Specify choice clearly on order.
NR
Non-returnable
Style P597 Standard Coupling
Style P597 STYLE P597 – WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Approx.
STANDARD COUPLING Nominal Weight
Size Each Price Each †
(P X P) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” Optional Grade “O”
inches lb EPDM Seal Fluoroelastomer Seal
½ 0.2 $89.50 $120.00
¾ 0.3 98.00 134.50
1 0.5 110.50 145.50
1½ 0.7 147.00 248.50
2 1.0 193.00 325.00
Style P596 Male Adapter – Threaded
Approx.
MALE ADAPTER – THREADED Nominal Weight
(P X M) Standard Grade “H”
Refer to publication 18.12 HNBR or Grade “E” EPDM Optional Grade “O”
inches lb Seal Fluoroelastomer Seal
½ x ½ 0.3 $165.00 $180.50
¾ x ½ 0.4 171.00 188.00
¾ 0.4 171.00 191.00
1 0.5 198.50 222.50
1 x ¾ 0.5 203.00 222.50
1 0.6 203.00 226.00
1½ x ¾ 0.8 376.50 395.00
1½ 1.0 337.00 447.50
2 x 2 1.4 414.50 506.50

Series P569 Type 316 Stainless Steel Ball Valve
Series P569 For Series P569 pricing, please refer to Series P569 in the Type 316 section.
TYPE 316 STAINLESS STEEL

BALL VALVE WITH LOCKING
HANDLE
PxP
PxG
GxG
Series P589 Brass Body Ball Valve
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E” Optional Grade “O”
Stainless Steel Vic-Press™ Type ½ 1.0 $516.00 $547.50
304 Schedule 10S Ends ¾ 1.6 566.00 604.00
1½ 4.7 949.50 1087.00
2 6.9 1162.00 1339.00
Style P586 90° Elbow – Short Tangent
Approx.
90° ELBOW – SHORT TANGENT Nominal Weight
½ 0.3 $164.50 $195.50
¾ 0.4 185.00 222.50
1 0.8 219.00 266.00
1½ 1.4 430.00 568.50
2 2.0 549.00 725.50

Style P542 90° Street Elbow
Approx.
90° STREET ELBOW Nominal Weight
(P X T) Standard Grade “H”
½ 0.3 $164.50 $179.00
¾ 0.4 185.00 204.00
1 0.7 219.00 241.00
1½ 1.4 430.00 498.50
2 2.0 549.00 636.50
Style P591 45° Elbow
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
Standard Grade “H”
(P X P) HNBR or Grade “E” Optional Grade “O”
Refer to publication 18.12 inches lb EPDM Seal Fluoroelastomer Seal
½ 0.2 $146.50 $178.00
¾ 0.4 162.00 198.50
1 0.8 192.50 239.00
1½ 1.7 374.50 513.00
2 2.5 479.00 656.50
Nominal Approx.
45° STREET ELBOW Size Weight Each Price Each †
(P X T) HNBR or Grade “E” Optional Grade “O”
½ 0.2 $146.50 $163.00
¾ 0.4 162.00 179.00
1 0.8 192.50 215.50
1½ 1.7 374.50 443.00
2 2.5 479.00 568.50

Style P592 Tee
Approx.
TEE Nominal Weight
(P X P X P) Standard Grade “H”
½ 0.4 $296.50 $344.50
¾ 0.5 326.50 383.50
1 0.9 349.50 420.00
1½ 1.5 447.00 654.50
2 2.1 554.50 821.00
Style P593 Tee – Reducing Branch
Approx.
TEE – REDUCING BRANCH Nominal Weight
(P X P X P) Standard Grade “H”
¾ x ¾ x ½ 0.5 $329.00 $383.50
1 x 1 x ½ 0.8 339.50 403.50
¾ 0.8 348.00 414.00
1½ x 1½ x ½ 1.2 410.00 563.00
¾ 1.3 414.00 571.00
1 1.4 416.00 577.00
2 x 2 x ½ 1.7 533.00 725.50
¾ 1.7 541.00 +
1 1.8 556.00 +
1½ 2.0 612.50 860.00

Style P588 Tee – Reducing Branch – Threaded
Approx.
TEE – REDUCING BRANCH – Nominal Weight
THREADED
(P X P X F) HNBR or Grade “E” Optional Grade “O”
½ x ½ x ½ 0.4 $447.00 $478.00
¾ x ¾ x ½ 0.5 483.50 520.00
¾ 0.6 488.00 526.00
1 x 1 x ½ 0.9 491.50 539.50
¾ 0.9 493.50 541.00
1 1.1 535.50 583.00
1½ x 1½ x ½ 1.4 556.00 696.00
¾ 1.5 562.50 700.00
1 1.5 614.00 753.00
2 x 2 x ½ 1.7 634.00 811.50
¾ 1.7 640.00 +
1 2.0 686.00 +
Style P594 Concentric Reducer
Approx.
CONCENTRIC REDUCER Nominal Weight
¾ x ½ 0.5 $268.50 $304.00
1 x ½ 0.6 360.50 400.50
¾ 0.7 287.00 328.50
1½ x ½ 0.9 505.50 589.00
¾ 1.0 474.00 562.00
1 1.1 264.50 358.00
2 x ½ 1.2 935.00 1039.50
¾ 1.3 422.50 531.00
1 1.4 326.50 440.00
1½ 1.6 326.50 485.00

Style P595 Flange Adapter
Nominal Approx.
FLANGE ADAPTER Size Weight Each Price Each †
(P X L) HNBR or Grade “E” Optional Grade “O”
½ 2.2 $1200.50 $1217.00
¾ 2.3 1236.00 1254.50
1 2.8 1254.50 1279.50
1½ 3.6 1528.50 1598.00
2 5.8 1702.00 1789.50
Approx.
FLANGE ADAPTER Nominal Weight
(VAN STONE TYPE)
½ 2.4 $421.00 $437.50
¾ 2.5 421.00 441.00
1 3.0 566.00 591.00
1½ 4.1 623.50 692.50
2 6.8 669.00 758.00
Style P587 Transition Nipple
Style P587 STYLE P587
Approx.
TRANSITION NIPPLE Nominal Weight
Size Each Unit End to End Price
(T X G) inches lb Inches Each
Refer to publication 18.12 ¾ 0.3 4 $223.00
1 0.5 4 231.00
1½ 0.7 4 288.50
2 0.9 4 301.50

Style P584 Threaded Union
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
½ 3.0 $986.50 $1018.00
¾ 3.7 1120.00 1158.00
1 4.3 1362.50 1409.00
1½ 6.0 2327.50 2465.00
2 6.8 2868.50 3046.50
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see
above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For
standard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
Style P599 Female Adapter – Threaded
Approx.
FEMALE ADAPTER – THREADED Nominal Weight
(P X F) Standard Grade “H”
½ x ½ 0.3 $201.50 $216.00
¾ x ½ 0.3 202.00 221.50
¾ 0.4 206.00 224.00
1 x ½ 0.7 216.50 241.00
¾ 0.6 231.50 254.50
1 0.6 245.50 270.00
1½ x 1 1.0 386.50 458.00
1¼ 0.8 + +
1½ 1.0 485.00 554.50
2 x 1¼ 1.1 565.50 +
1½ 1.3 478.00 570.50
2 1.2 526.00 618.00
Style P561 Adapter
Nominal Approx.
WELD ADAPTER Size Weight Each Price Each †
(P X W) HNBR or Grade “E” Optional Grade “O”
½ 0.3 $161.00 $176.00
¾ 0.4 166.00 184.50
1 0.6 196.00 219.00
1½ 0.9 339.50 405.00
2 1.4 402.50 486.00

Style P540 End Cap
Nominal Approx.
END CAP Size Weight Each Price
Refer to publication 18.12 inches lb Each
½ 0.1 $205.00
¾ 0.1 226.00
1 0.3 241.00
1½ 0.4 308.00
2 0.5 383.50
PFT510 Vic-Press™ Tool
PFT510 The Vic-Press™ Schedule 10S System requires a tool specifically designed for products on off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 17 – Pipe Preparation Tools for
Vic-Press™ Tool prices and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool

Vic-Press™ System for Type 316 Schedule 10S Stainless Steel Pipe
™ Vic-Press™ System for Type 316 Schedule 10S

The Victaulic® Vic-Press™ System for joining Schedule 10S Type 316 (L) stainless
steel pipe provides a fast, easy, clean, and reliable means for joining ½ – 2”/15 – 50
mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press™ Schedule
10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI
Class 150 (except steam, according to standard temperature/pressure charts) for
water, oil, noncombustible gaseous and general chemical services and are
dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended
service.
The Vic-Press™ Schedule 10S System eliminates the need for flame as in welding,
no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into
the coupling and the coupling is pressed onto the pipe and fitting in seconds.
The Vic-Press™ Schedule 10S System meets the hanging requirements of ASME
B31.1, B31.3 and B31.9.
Vic-Press™ Type 316 couplings and fittings are recommended for varying
concentrations of hot petroleum/water mixtures, hydrocarbons, air with oil vapors,
vegetable and mineral oils, as well as automotive fluids such as engine oil and
transmission fluid within the temperature range of –20°F to +210°F/–29°C to +98°C.
UL Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and
hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials.
Unless specified otherwise, Grade “H” seals will be applied. FM Approved to 175
psi/1200 kPa service for above ground sprinkler systems.

WARNING
• Before attempting to install any Vic-Press™ Schedule 10S System products,
carefully read and fully understand the “Vic-Press™ Schedule 10S Products
Installation Instructions” (I-P500) and the operating and maintenance manual
supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.

Style P500 Loose Seals
Style P500 STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal
LOOSE SEALS Size Price Each †
Refer to publication 18.11 Standard Grade “H” HNBR or Optional Grade “O”
inches Grade “E” EPDM Seal Fluoroelastomer Seal
½ $15.50 NR $42.00
¾ 17.00 NR 48.00
1 21.00 NR 54.00
1½ 26.50 NR 106.00
2 36.50 NR 139.00
NR
Non-returnable
Style P507 Standard Coupling
Nominal Approx.
STANDARD COUPLING Size Weight Each Price Each †
½ 0.2 $100.00 $119.50
¾ 0.3 111.50 148.50
1 0.5 125.50 174.00
1½ 0.7 173.50 309.50
2 1.0 250.50 427.50
Style P576 Male Adapter – Threaded
Nominal Approx.
MALE ADAPTER – THREADED Size Weight Each Price Each †
(P X M) HNBR or Grade “E” EPDM Optional Grade “O”
Refer to publication 18.11 inches lb Seal Fluoroelastomer Seal
½ x ½ 0.3 $170.00 $186.50
¾ x ½ 0.4 178.00 196.00
¾ 0.4 178.00 195.50
1 0.5 204.00 223.00
1 x ¾ 0.5 208.50 233.00
1 0.6 208.50 233.00
1½ x ¾ 0.8 380.50 450.50
1½ 1.0 430.50 502.50
2 x 2 1.4 559.00 649.50

Style P508 Slip Coupling
Approx.
SLIP COUPLING Nominal Weight
½ 0.3 $116.50 $147.00
¾ 0.4 125.50 164.00
1 0.7 144.50 191.00
1½ 1.1 185.00 324.00
2 1.6 235.50 413.00
Series P569 Stainless Steel Ball Valve
Series P569 SERIES P569 – VIC-PRESS SCHEDULE 10S X VIC-PRESS SCHEDULE 10S (P X P)
Price Each
TYPE 316 STAINLESS STEEL Approx. Vic-Press x Vic-Press
Nominal Size Weight Each (P X P) †
BALL VALVE WITH LOCKING
HANDLE Standard Grade “H”
HNBR or Grade “E” Optional Grade “O”
½ 1.5 $688.00 $719.50
¾ 2.4 800.00 836.00
1 3.6 961.00 1008.00
1½ 6.9 1491.50 1625.50
PxP
2 9.5 1999.50 2171.50
SERIES P569 VIC-PRESS SCHEDULE 10S X GROOVED (P X G)
Price Each
Approx. Vic-Press x Grooved
Nominal Size Weight Each (P X G) †
PxG
¾ 2.4 $800.00 $836.00
1 3.6 961.00 1008.00
GxG 1½ 6.9 1491.50 1625.50
2 9.5 1999.50 2171.50
SERIES P569 GROOVED X GROOVED (G X G)
Approx.
Nominal Size Weight Each Price Each
Grooved x Grooved
inches lb (G X G)
¾ 2.4 $696.00
1 3.6 843.00
1½ 6.9 1327.50
2 9.5 1760.50


Series P569 Repair Kits
Series P569 SERIES P569 REPAIR KITS
Nominal
REPAIR KITS Size Price Each
Refer to publication 18.14 inches Repair Kit
½ $132.00
¾ 125.00
1 155.50
1½ 334.50
2 564.50
Repair kits include one stainless steel ball, two seats, two gaskets, one stem seal and one thrust washer.
Series P589 Brass Body Ball Valve
Series P589 SERIES P589 – VIC-PRESS™ SCHEDULE 10S ENDS WITH STANDARD GRADE “H” HNBR SEAL OR OPTIONAL GRADE “E” SEAL
Nominal Approx.
VIC-PRESS™ SCHEDULE 10S Size Weight Each Price Each †
SYSTEM BRASS BODY BALL Standard Grade “H”
VALVE HNBR or Grade “E” Optional Grade “O”
Stainless Steel Vic-Press™ Type ½ 1.0 $526.00 $558.50
316 Schedule 10S Ends ¾ 1.6 576.50 614.00
1½ 4.7 1131.50 1269.00
2 6.9 1440.00 1618.00
Style P568 90° Elbow – Short Tangent
Nominal Approx.
90° ELBOW – SHORT TANGENT Size Weight Each Price Each †
½ 0.3 $312.00 $344.50
¾ 0.4 351.50 421.00
1 0.8 393.50 473.50
1½ 1.4 531.50 636.50
2 2.0 729.50 873.50
Nominal Approx.
½ 0.3 $312.00 $328.00
¾ 0.4 351.50 370.50
1 0.7 393.50 418.50
1½ 1.4 531.50 600.50
2 2.0 729.50 816.50

Style P571 45° Elbow
Nominal Approx.
45° ELBOW Size Weight Each Price Each †
½ 0.2 $287.00 $318.00
¾ 0.4 308.00 346.00
1 0.8 345.00 391.50
1½ 1.7 462.00 600.50
2 2.5 633.50 810.50
Nominal Approx.
½ 0.2 $287.00 $301.50
¾ 0.4 308.00 326.50
1 0.8 345.00 368.00
1½ 1.7 462.00 531.50
2 2.5 633.50 721.50
Style P572 Tee
Nominal Approx.
TEE Size Weight Each Price Each †
(P X P X P) HNBR or Grade “E” Optional Grade “O”
½ 0.4 $671.00 $719.50
¾ 0.5 725.00 782.50
1 0.9 760.00 831.50
1½ 1.5 895.00 1103.00
2 2.1 1104.00 1371.00

Style P573 Tee – Reducing Branch
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
(P X P X P) HNBR or Grade “E” Optional Grade “O”
¾ x ¾ x ½ 0.5 $766.00 $819.00
1 x 1 x ½ 0.8 831.50 894.50
¾ 0.8 865.00 932.50
1½ x 1½ x ½ 1.2 1221.00 1374.50
¾ 1.3 1230.00 1388.50
1 1.4 1259.00 1422.50
2 x 2 x ½ 1.7 1426.50 1619.00
¾ 1.7 1469.00 1705.50
1 1.8 1636.50 1819.50
1½ 2.0 1679.50 1964.50
Style P578 Tee – Reducing Branch Threaded
Nominal Approx.
TEE – REDUCING BRANCH Size Weight Each Price Each †
THREADED Standard Grade “H”
(P X P X F) inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.11 ½ x ½ x ½ 0.4 $934.50 $965.00
¾ x ¾ x ½ 0.5 1034.50 1072.00
¾ 0.6 1061.50 1099.00
1 x 1 x ½ 0.9 1133.50 1181.50
¾ 0.9 1154.00 1200.50
1 1.1 1242.00 1287.50
1½ x 1½ x ½ 1.4 1355.50 1494.00
¾ 1.5 1404.00 1541.00
1 1.5 1460.00 1598.00
2 x 2 x ½ 1.7 1494.50 1673.00
¾ 1.7 1548.50 +
1 2.0 1641.50 1819.50

Style P574 Concentric Reducer
Nominal Approx.
CONCENTRIC REDUCER Size Weight Each Price Each †
(P X P) HNBR or Grade “E” EPDM Optional Grade “O”
¾ x ½ 0.5 $315.00 $349.00
1 x ½ 0.6 400.50 440.00
¾ 0.7 296.50 338.00
1½ x ½ 0.9 591.50 675.50
¾ 1.0 389.50 476.00
1 1.1 274.50 367.00
2 x ½ 1.2 1020.50 1125.50
¾ 1.3 447.50 554.00
1 1.4 336.00 449.00
1½ 1.6 336.00 494.00
Nominal Approx.
½ 2.2 $1220.00 $1234.50
¾ 2.3 1242.00 1258.50
1 2.8 1270.00 1295.00
1½ 3.6 1539.00 1608.50
2 5.8 1710.00 1799.00
Nominal Approx.
(VAN STONE TYPE) Standard Grade “H”
(P X L) inches lb EPDM Seal Fluoroelastomer Seal
Refer to publication 18.11 ½ 2.4 $421.00 $437.50
¾ 2.5 421.00 440.00
1 3.0 566.00 589.00
1½ 4.1 623.50 692.50
2 6.8 669.00 758.00

Style P577 Transition Nipple
Nominal Approx.
TRANSITION NIPPLE Size Weight Each Price
inches lb Each
(T X G) ¾ 0.3 $230.50
1½ 0.7 297.50
2 0.9 309.00
Style P585 Threaded Union
Nominal Approx.
THREADED UNION ** Size Weight Each Price Each †
½ 3.0 $1010.00 $1041.50
¾ 3.7 1163.50 1200.00
1 4.3 1420.00 1468.00
1½ 6.0 2348.00 2485.50
2 6.8 3102.00 3278.00
** Grooved End Union - A grooved end union can be formed with two Style P577 (Type 316 stainless) transition nipples (see
above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For
standard ductile iron couplings, stainless steel couplings and gaskets refer to the Stainless Steel Products section.
Style P579 Female Adapter – Threaded
Nominal Approx.
FEMALE ADAPTER – THREADED Size Weight Each Price Each †
(P X F) HNBR or Grade “E” EPDM Optional Grade “O”
½ x ½ 0.3 $223.50 $240.50
¾ x ½ 0.3 233.00 253.50
¾ 0.4 237.00 256.00
1 x ½ 0.7 249.00 273.50
¾ 0.6 263.50 288.50
1 0.6 277.00 349.00
1½ x 1 1.0 461.00 533.00
1¼ 0.8 461.00 533.00
1½ 1.0 577.50 648.50
2 x 1¼ 1.1 573.00 664.50
1½ 1.3 573.00 664.50
2 1.2 628.50 720.50

Style P560 End Cap
P560 STYLE P560 END CAP
Nominal Approx.
END CAP Size Weight Each Price
Refer to publication 18.11 inches lb Each
½ 0.1 $464.00
¾ 0.1 501.50
1 0.3 526.00
1½ 0.4 618.50
2 0.5 760.50
PFT510 Vic-Press™ Tool
PFT510 The Vic-Press™ Schedule 10S System requires a tool specifically designed for products on off-the-shelf
standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 17 – Pipe Preparation Tools for
Vic-Press™ Tool prices and where to call for purchase information.
NOTE: Victaulic Tool Discount will apply.
PFT510 Tool

SECTION 10 – HDPE Products
HDPE
Products

Products for HDPE Pipe
Style 905 Coupling for HDPE Pipe
Couplings for HDPE Pipe

Coupling for
Plain End HDPE Pipe
STYLE 905
STYLE 905 IPS STANDARD – GRADE “E” OR “T” GASKET, STANDARD OR FLUSH-SEAL™
Grade
“E”
Grade or “T”
COUPLING COUPLING “E” Flush- Stainless
Approx. COMPLETE COMPLETE With or “T” Seal Steel
PIPE Weight With Grade “E” or Grade “E” or “T” Gasket Gasket Fluoropolymer Coated Retaining
inches Each “T” Gasket Flush-Seal Gasket Only Only Bolt/Nut/Washer § Ring †
Nominal Outside Price Each Price Each Price Price Size Price Price
Size Diameter lb Painted * Coated * Painted * Coated * Each Each No. inches Each Each
2 2.375 5.5 $228.00 $456.00 $252.00 $502.50 $75.50 $98.50 2 ½ x 3¼ $28.00 $69.50
3 3.500 8.5 278.00 556.00 306.00 610.50 78.00 106.50 2 ⅝ x 3½ 41.00 108.50
4 4.500 13.1 353.00 705.50 388.50 776.00 130.00 165.50 2 ⅝ x 4¼ 46.50 146.00
5 5.563 18.7 519.00 1037.50 – – 151.00 – 2 ¾ x 4¼ 70.50 183.00
6 6.625 19.4 564.50 1128.00 620.50 1240.00 163.50 220.50 2 ¾ x 5 87.50 217.00
8 8.625 25.0 748.00 1495.50 823.00 1645.50 215.50 290.50 4 ¾ x 6¼ 93.50 283.00
10 10.750 73.5 910.50 1820.00 – – 281.50 – 4 ⅞ x 6½ 128.00 353.00
12 12.750 86.5 1008.00 2015.50 – – 312.50 – 4 ⅞ x 6½ 128.00 423.50
14 14.000 112.6 1826.00 3650.50 – – 530.00 – 4 1⅛ x 7 156.50 494.50
STYLE 905 ISO STANDARD – GRADE “E” OR “T” GASKET
COUPLING COMPLETE Grade “E” or Stainless Steel

Approx. With Grade “E” or “T” “T” Gasket Fluoropolymer Coated Retaining
ISO Size Weight Each Wgt. Each Gasket Only Bolt/Nut/Washer § Ring †
O.D. Price Each Size
[mm] lb [kg] Painted * Coated * Price Each No. inches Price Each Price Each
63 5.5 2.5 $228.00 $456.00 $75.50 2 ½ x 3¼ $28.00 $69.50
75 8.1 3.7 247.50 495.00 76.50 2 ⅝ x 3½ 37.50 86.50
90 8.5 3.9 278.00 556.00 78.00 2 ⅝ x 4 37.50 108.50
110 13.0 5.9 353.00 705.50 130.00 2 ⅝ x 4 42.50 147.00
125 17.3 7.8 395.50 790.50 139.00 2 ¾ x 4¼ 64.50 156.50
140 18.7 8.5 519.00 1037.50 151.00 2 ¾ x 4¼ 64.50 183.00
160 19.3 8.8 564.50 1128.00 163.50 2 ¾ x 5 80.00 217.00
180 25.4 11.5 634.50 1268.50 185.50 4 ¾ x 6¼ 80.00 233.50
200 26.8 12.2 748.00 1495.50 208.00 4 ¾ x 6¼ 85.50 255.00
225 28.7 13.0 762.00 1523.00 223.50 4 ¾ x 6¼ 85.50 297.50
250 73.5 30.9 910.50 1820.00 281.50 4 ⅞ x 6½ 117.00 353.00
280 78.0 35.4 960.00 1918.50 297.50 4 ⅞ x 6½ 117.00 389.00
315 83.9 38.1 1008.00 2015.50 312.50 4 ⅞ x 6½ 117.00 423.50
355 112.6 51.1 1826.00 3650.50 530.00 4 1⅛ x 7 143.50 494.50

§ Price includes one bolt, nut, and washer for coupling sizes 2” - 4” | 63mm - 160mm and one bolt, nut, and two washers for coupling sizes 5” - 14” | 180mm - 355mm.
† Set of two required for coupling sizes through 2” - 8” | 63mm - 225mm. Set of four required for coupling sizes through 10” - 14” | 250mm - 355mm.
* “Painted” option includes enamel coating with fluoropolymer-coated hardware. “Coated” option includes liquid bonded epoxy coating with stainless steel hardware.
NOTE: Fusion bonded epoxy and galvanized finishes available. Contact Victaulic for pricing.

Style 907 and Style W907 Transition Coupling for HDPE-to-Steel Pipe
Transition Coupling for

HDPE-to-Steel Pipe
STYLE 907 AND STYLE W907
STYLE 907 & STYLE W907 IPS STANDARD – GRADE “E” OR “T” GASKET
Stainless
COUPLING COMPLETE Grade “E” Steel
PIPE Approx. With Grade “E” or “T” or “T” Fluoropolymer Coated Retaining
inches Weight Each Gasket Gasket Only Bolt/Nut/Washer § Ring †
Nominal Outside Style Price Each Size Price
Size Diameter Number lb Painted * Coated * Price Each No. inches Each Price Each
2 2.375 4.7 $289.00 $577.50 $75.50 2 ½ x 3¼ + $69.50
3 3.500 6.6 343.00 686.00 78.00 2 ⅝ x 3½ + 108.50
4 4.500 9.4 426.00 851.50 130.00 2 ⅝ x 4¼ + 146.00
5 5.563 11.9 599.00 1197.50 151.00 2 ¾ x 4¼ + 183.00
907
6 6.625 13.8 644.50 1288.50 163.50 2 ¾ x 5 + 217.00
8 8.625 21.4 860.50 1720.50 215.50 2 ¾ x 6¼ + 283.00
10 10.750 53.0 1137.50 2274.50 281.50 4 ⅞ x 6½ + 353.00
12 12.750 62.0 1260.50 2519.00 312.50 4 ⅞ x 6½ + 423.50
14 14.000 W907 81.0 2282.50 4564.00 530.00 4 1⅛ x 7 + 494.50
STYLE 907 & W907 ISO STANDARD – GRADE “E” OR “T” GASKET
Grade
COUPLING “E”
COMPLETE or “T” Stainless Steel
Approx. With Grade “E” or Gasket Fluoropolymer Coated Retaining
ISO Size Weight Each Wgt. Each “T” Gasket Only Bolt/Nut/Washer § Ring †
Nominal Size
HDPE Plain
End x Actual
Size Grooved
End Price Each Price Size Price
[mm] Style Number lb [kg] Painted * Coated * Each No. inches Each Price Each
63 x 60.3 4.9 2.2 $289.00 $577.50 $75.50 2 ½ x 3¼ $28.00 $69.50
75 x 73.0 5.9 2.7 304.50 607.50 76.50 2 ⅝ x 3¼ 41.00 86.50
90 x 88.9 6.5 3.0 343.00 686.00 78.00 2 ⅝ x 4 46.50 108.50
110 x 114.3 9.6 4.4 426.00 851.50 130.00 2 ⅝ x 4 46.50 147.00
125 x 114.3 11.3 5.1 474.50 948.00 139.00 2 ¾ x 4¼ 70.50 156.50
140 x 141.3 11.9 5.4 599.00 1197.50 151.00 2 ¾ x 4¼ 70.50 183.00
160 x 168.3 907 12.8 5.8 644.50 1288.50 163.50 2 ¾ x 5 87.50 217.00
180 x 165.1 7.0 15.4 762.00 1523.00 185.50 2 ¾ x 5 185.50 233.50
168.3 15.0 6.8 762.00 1523.00 185.50 2 ¾ x 5 87.50 233.50
200 x 219.1 21.7 9.8 840.00 1679.50 208.00 2 ¾ x 6¼ 93.50 255.00
225 x 219.1 22.0 10.0 881.50 1763.00 223.50 2 ¾ x 6¼ 93.50 297.50
250 x 273.0 53.0 24.0 1137.50 2274.50 281.50 4 ⅞ x 6½ 128.00 353.00
280 x 273.0 54.0 24.5 1198.50 2396.50 297.50 4 ⅞ x 6½ 128.00 389.00
315 x 323.9 907 61.0 27.7 1260.50 2519.00 312.50 4 ⅞ x 6½ 128.00 423.50
355 x 355.6 W907 81.0 36.7 2282.50 4564.00 530.00 4 1⅛ x 7 156.50 494.50

§ Price includes one bolt, nut, and washer for coupling sizes 2” - 8” | 63mm - 225mm and one bolt, nut, and two washers for coupling sizes 10” - 14” | 250mm - 355mm.
† One required for coupling sizes through 2” - 8” | 63mm - 225mm. Set of two required for coupling sizes 10” - 14” | 250mm - 355mm.
* “Painted” option includes enamel coating with fluoropolymer-coated hardware. “Coated” option includes liquid bonded epoxy coating with stainless steel hardware.

Style 2971 Aquamine™ Transition Coupling for PVC to HDPE
Style 2971 Refer to Aquamine™ Price List (PL2022-A-AMP) for product information.
AQUAMINE™ TRANSITION
COUPLING FOR PVC TO HDPE
PIPE

Style 908 Coupling for Double Grooved HDPE Pipe
Coupling for Double STYLE 908 IPS STANDARD – GRADE “E” OR “T” GASKET
Grade
Grooved HDPE Pipe COUPLING “E”
Approx. COMPLETE or “T”
STYLE 908 PIPE Weight With Grade “E” or Gasket Fluoropolymer Coated
Refer to publication 19.09 inches Each “T” Gasket Only Bolt/Nut/Washer Set §
Nominal Outside Price Each Price Size Price
Size Diameter lb Painted Coated * Each No. inches Each
8 8.625 59.0 $647.00 + + 4 ⅝ x 5 $245.00
10 10.750 81.0 874.00 + + 4 ¾ x 5 270.50
12 12.750 90.0 1424.50 + + 4 ¾ x 5 270.50
14 14.000 137.0 2127.50 + + 4 ⅞ x 5½ 378.00
16 16.000 184.0 2659.00 + $615.50 4 ⅞ x 5½ 378.00
18 18.000 204.0 4368.00 + 695.50 4 ⅞ x 5½ 378.00
8 – 18”
20 † 20.000 247.0 6494.50 + + 4 ⅞ x 5½ 378.00
22 † 22.000 277.0 7120.00 + 765.50 NR 4 ⅞ x 5½ 378.00
24 † 24.000 366.0 7670.50 + 842.50 4 1 x 6 408.00
28 † 28.000 455.0 8696.50 + 995.50 NR 4 1 x 6 408.00
30 † 30.000 525.0 9588.00 + 1071.00 NR 4 1⅛ x 7 536.50
32 † 32.000 594.0 9588.00 + + 4 1⅛ x 7 536.50
36 † 36.000 726.0 13860.00 + 1530.00 NR 4 1¼ x 7 775.00
STYLE 908 ISO STANDARD – GRADE “E” OR “T” GASKET
Grade
COUPLING “E”
20 – 36” Approx. COMPLETE or “T”
Weight Wgt. With Grade “E” or Gasket Fluoropolymer Coated
ISO Size Each Each “T” Gasket Only Bolt/Nut/Washer Set §
O.D. Price Each Price Size Price
[mm] lb [kg] Painted Coated * Each No. inches Each
250 81.0 29.0 $874.00 + + 4 ¾ x 5 $270.50
280 77.0 35.0 + + + 4 ¾ x 5 270.50
315 90.0 36.0 1424.50 + + 4 ¾ x 5 270.50
355 137.0 53.0 2127.50 + + 4 ⅞ x 5½ 378.00
400 184.0 73.0 2659.00 + $616.00 4 ⅞ x 5½ 378.00
450 204.0 74.0 4368.00 + 644.00 4 ⅞ x 5½ 378.00
500 247.0 116.0 6494.50 + 695.50 4 ⅞ x 5½ 378.00
560 277.0 119.0 7120.00 + 765.50 4 ⅞ x 5½ 378.00
630 366.0 165.0 7670.50 + 837.50 4 1 x 6 408.00
710 455.0 202.0 8696.50 + 995.50 4 1 x 6 408.00
800 594.0 255.0 10158.00 + 1148.00 4 1⅛ x 7 536.50
900 726.0 320.0 13860.00 + 1530.00 4 1¼ x 7 775.00

† Not all sizes are available for immediate delivery as of this printing. Contact Victaulic for availability/delivery information.
§ Each set includes 4 bolts, 4 nuts, and 8 washers.
NOTE: If required, internal pipe stiffeners available. Refer to publication 19.09.
* “Painted” option includes enamel coating with fluoropolymer-coated hardware. “Coated” option includes liquid bonded
epoxy coating with stainless steel hardware.
NR
Non-returnable

Style 904 Flange Adapter for HDPE-to-Flanged Pipe
Flange Adapter for STYLE 904 IPS STANDARD – GRADE “E” OR “T” GASKET
COUPLING
HDPE-to-Flanged Pipe COMPLETE Grade
With Grade “E” or “E”
STYLE 904 Approx. “T” Gasket or “T” Steel
Refer to publication 19.12 PIPE Weight SDR 11 or SDR 17 Gasket Fluoropolymer Coated Retaining
inches Each HDPE Insert Only Bolt/Nut/Washer § Ring
Nominal Outside Price Each Price Size Price Price
Size Diameter lb Painted Coated * Each No. inches Each Each
3 3.500 10.2 $408.00 + $78.00 2 ⅝ x 3½ $44.50 $108.50
4 4.500 16.1 485.00 + 130.00 2 ⅝ x 3½ 44.50 146.00
6 6.625 23.6 912.00 + 163.50 2 ¾ x 5 94.50 217.00
8 8.625 31.9 1216.00 + 215.50 2 ¾ x 6¼ 101.00 283.00
§ Price includes one bolt, nut and washer for Flange Adpater sizes 3 – 4” and one bolt and nut and two washers in Flange
Adapter sizes 6 – 8”.
* “Painted” option includes enamel coating with fluoropolymer-coated hardware. “Coated” option includes liquid bonded
epoxy coating with stainless steel hardware.

Style 926 Mechanical-T Spigot
Mechanical-T Spigot Nominal Size Approx. COMPLETE MECHANICAL-T

inches Wgt. Ea. Spigot SPARE PARTS
STYLE 926 O-Ring Grade
Price Each “T” U-Bolts/Nuts
For use with IPS Steel and Host Pipe x Outlet lb Unlined Rubber Lined † Price Each Price per Set *
HDPE Pipe 10 x 4 31.0 $1033.00 $1702.50 $93.50 NR $108.50
Refer to publication 11.07 12 x 4 33.0 1179.00 1846.50 93.50 NR 108.50
14 x 4 33.0 1323.50 1992.00 93.50 NR 108.50
16 x 4 35.0 1484.50 2152.50 93.50 NR 108.50
6 43.0 1607.00 2467.00 124.00 NR 108.50
18 x 4 36.0 1759.50 2428.00 93.50 NR 108.50
6 45.0 1911.50 2772.00 124.00 NR 108.50
20 x 4 38.0 2064.50 2734.00 93.50 NR 108.50
6 46.0 2279.00 3138.50 124.00 NR 108.50
22 x 4 39.0 2294.00 2962.50 93.50 NR 108.50
6 47.0 2447.50 3307.00 124.00 NR 108.50
24 x 4 40.0 2447.50 3115.50 93.50 NR 108.50
6 48.0 2714.00 3575.00 124.00 NR 108.50
26 x 4 41.0 2676.00 3345.50 93.50 NR 108.50
6 50.0 3020.00 3880.00 124.00 NR 108.50
28 x 4 43.0 2982.00 3651.50 93.50 NR 108.50
6 51.0 3593.50 4453.50 124.00 NR 108.50
30 x 4 44.0 3134.50 3802.50 93.50 NR 108.50
6 53.0 3822.50 4682.50 124.00 NR 108.50
32 x 4 46.0 3325.50 3994.50 93.50 NR 108.50
6 54.0 4242.50 5102.50 124.00 NR 108.50
36 x 6 56.0 4739.50 5599.00 124.00 NR 108.50
42 x 6 60.0 5351.00 6211.00 124.00 108.50
48 x 6 64.0 6038.50 6899.00 124.00 108.50
* Set consists of one 6, 8, or 10” U-bolt, two washers and two hex nuts.
† Standard rubber lining – ¼” thick, 40 durometer natural rubber lining. Other materials or thicknesses quoted upon request.
NR
Non-returnable
Style 926 Spigot Hole Saw for HDPE Pipe
Style 926 Spigot Hole Nominal Size Cutter Diameter Purchase

inches inches Part Number List Price Each
Saw for HDPE Pipe 4 4.500 R040926HHS $705.00
6 6.625 R060926HHS 1050.50

Style 995N HDPE Coupling
HDPE Coupling * STYLE 995N – GRADE “E” OR “T” GASKET
STYLE 995N PIPE Approx. With Grade “E” or “T” Grade “E” or Plated
inches Weight Each Gasket “T” Bolt & Nut
Nominal Outside Price Each Size
Size Diameter lb Painted Plated Gasket Only inches
10 10.750 37.4 $1942.50 $2430.50 $362.50 NR ¾ x 6¼
12 12.750 47.8 2238.00 2809.00 440.00 NR ⅞ x 6½
14 14.000 81.0 6318.50 + 628.50 1 x 7#
16 16.000 100.0 8430.50 + 744.00 NR 1 x 7#
18 18.000 127.0 10329.00 + 778.50 NR 1 x 7#
20 20.000 142.0 14025.50 + 841.50 NR 1 x 7#
* Coupling for High Density Polyethylene Pipe.
Style 99 gaskets fit Style 995N couplings up to 12”.
# Supplied with T-bolts and rocker washer.
See below for spare hardware prices.
NR
Non-returnable
STYLE 995N – HDPE COUPLING KITS

INCLUDES PLATED BOLT AND NUT, HARDENED WASHER AND INSTRUCTION SHEET
Size
inches Price Each
10 $160.00
12 +
Style 997 HDPE-to-Steel Transition Coupling
Transition Coupling STYLE 997 – GRADE “E” OR “T” GASKET
Grade “E”
(HDPE TO STEEL) COUPLING COMPLETE † EPDM or
PIPE Approx. With Grade “E” or “T” Grade “T” Plated
STYLE 997
inches Weight Each Gasket Nitrile Bolt & Nut
Nominal Outside Price Each Size
Size Diameter lb Painted Plated Gasket Only inches
10 10.750 34.3 $2540.00 + $271.50 ¾ x 6½
12 12.750 37.5 2904.00 + 316.00 ⅞ x 6½
Style 77 gaskets fit Style 997 couplings.

HDPE Plain End Fittings
No. H10 – 90° Elbow
Plain End HDPE Fittings

90° Elbow 90° ELBOW
Nom.
Refer to publication 19.11 Size SDR 7 SDR 9 SDR 11 SDR 17
Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
2 0.8 $64.00 0.6 $53.50 0.6 $43.00 0.5 $40.50
No. H10 3 1.5 119.50 1.7 92.50 1.5 65.50 1.1 64.50
4 3.6 147.00 3.0 112.50 2.6 79.50 1.9 77.00
6 9.2 322.00 7.7 266.00 6.6 210.50 4.9 197.50
8 16.0 558.00 14.5 505.00 13.0 450.50 10.0 347.00
No. H11 – 45° Elbow
45° Elbow 45° ELBOW
Nom.
2 0.6 $61.50 0.5 $53.50 0.5 $44.50 0.4 $43.00
3 1.4 102.00 1.2 83.50 1.0 64.50 0.7 62.00
No. H11 4 2.6 149.00 2.1 114.00 1.9 78.50 1.4 76.50
6 6.1 281.00 5.0 239.00 4.3 197.00 3.3 189.50
8 11.0 439.50 8.9 399.50 9.0 360.00 7.0 280.00
No. H20 – Tee
Tee TEE
Nom.
2 1.0 $61.50 0.9 $57.00 0.8 $51.00 0.6 $50.00
No. H20 3 2.6 116.50 2.1 92.00 1.9 68.50 1.4 66.00
4 4.6 153.50 3.8 127.00 3.4 99.50 2.5 95.50
6 12.0 372.50 10.1 309.50 8.6 247.00 6.4 238.00
8 23.0 748.00 20.7 653.00 19.0 559.00 15.0 439.50
No. H50 – Concentric Reducer
Concentric Reducer CONCENTRIC REDUCER
Nom. Size SDR 7 SDR 9 SDR 11 SDR 17

3 x 2 1.0 $69.50 0.9 $54.50 0.8 $38.50 0.6 $38.50
No. H50 4 x 2 1.6 90.50 1.4 72.50 1.1 56.00 0.7 56.00
3 2.0 90.50 1.7 72.50 1.4 56.00 1.0 56.00
6 x 3 4.2 153.50 3.7 146.00 2.8 137.50 1.9 137.50
4 4.7 153.50 4.0 146.00 3.5 137.50 2.7 137.50

Series 906 Knife Gate Valve for Plain End HDPE Pipe
Knife Gate Valve for Plain End

HDPE Pipe
SERIES 906
with with with

Manual Pneumatic Hydraulic
Actuator Actuator Actuator
3” 4” 6” 8”
Size (030) (040) (060) (080)
VALVE WITH MANUAL ACTUATOR
Manual Actuator with Grade “E” or “T” Gasket $5732.50 $9172.00 $10394.50 $12992.50
VALVE WITH MANUAL ACTUATOR WITH STEM GUARD
Manual Actuator with Grade “E” or “T” Gasket + + + +
VALVE WITH PNEUMATIC ACTUATOR
Pneumatic Actuator with Grade “E” or “T” Gasket $7643.00 $9936.00 $12992.50 $15285.50
VALVE WITH PNEUMATIC ACTUATOR AND SOLENOID VALVE
$5435.50 $11613.00 $14817.50 $17111.00
10075.50 12367.50 15468.50 17760.00
VALVE WITH PNEUMATIC ACTUATOR AND LIMIT SWITCHES
$8088.00 $10380.50 $13438.00 $15729.50
10008.00 12301.00 15358.00 17650.00
VALVE WITH PNEUMATIC ACTUATOR, LIMIT SWITCHES, AND SOLENOID VALVE
$9765.00 $12057.50 $15262.50 $17555.00
12440.50 14733.00 17832.00 20125.00
VALVE WITH PNEUMATIC ACTUATOR AND TRANSDUCER/POSITIONER
Pneumatic Actuator with Weatherproof Enclosure Linear
$13047.50 $15339.50 $18435.00 $20897.50
Position Transducer Grade “E” or “T” Gasket
Transducer and Electro-pneumatic Positioner 18150.50 20443.00 23525.00 25817.00
Grade “E” or “T” Gasket


3” 4” 6” 8”
Size (030) (040) (060) (080)
VALVE WITH HYDRAULIC ACTUATOR
Hydraulic Actuator with Grade “E” or “T” Gasket $7643.00 $9936.00 $12992.50 $15285.50
VALVE WITH HYDRAULIC ACTUATOR AND TRANSDUCER
Hydraulic Actuator with Hydraulic Weatherproof Enclosure
$13047.50 $15340.00 $18435.50 $20897.50
Linear Position Transducer Grade “E” or “T” Gasket
VALVE WITH ELECTRIC ACTUATOR
Electric Actuator with Grade “E” or “T” Gasket + + + +
PNEUMATIC CYLINDER LIMIT SWITCHES (Price per set of 2)
Weatherproof Enclosure (Any Voltage) $445.50 $445.50 $445.50 $445.50
SEAT CARTRIDGE KIT
Includes Replacement Knife/Packing/Seat $3059.00 $3822.50 $4586.50 $6878.50

V - 060 - 906 - H - N - E - 1 - P - 1 - A - 1
Product Gate Material

Class Size Style Housing Coating Pipe/Seat Gasket or Coating Actuation Type Actuation Control Options Control Options Hardware
V 030 - 3" 906 H - HDPE x HDPE Plain N - Standard - E - EPDM 1 - 316 Stainless P - Pneumatic 0 - None 0 - None 1 - Standard -
040 - 4" End Electroless T - Nitrile Steel H - Hydraulic 1 - Pneumatic with Solenoid A - Weatherproof Carbon Steel
060 - 6" Nickel E - Electric Valve (24VDC) Enclosure Zinc Plated
080 - 8" M - Handwheel 2 - Pneumatic with Limit Switches B - Hazardous 2 - Stainless Steel
9 - Special (5-240V AC/DC) Location Enclosure
3 - Pneumatic with Solenoid 9 - Special
Valve (110-120 VAC)
4 - Pneumatic with Solenoid
Valve (24VDC) and Limit
Switches
5 - Pneumatic with Solenoid
Valve (110-120 VAC) and Limit
Switches
6 - Pneumatic with Positioner/
Transducer (420 mA)
7 - Hydraulic with Transducer
8 - Stem Guard for M and B
Actuators
9 - Special
NOTE: Electric actuation and other special actuation control options can be quoted upon request. Contact Victaulic for pricing and availability.

CG3100/3300/3500 Cut Grooving Tool for HDPE Pipe
CG3100/3300/3500 Cut grooving tools are designed for grooving 8 – 36” HDPE (DR7 – DR21) pipe. The tool mounts on the
exterior pipe wall and cuts and grooves the end of the pipe in a single operation.
Cut Grooving Tool for
The CG3100 and CG3300 tools connect directly to a 120-volt, 50-60 Hz, 20-amp power source. An
HDPE Pipe optional 220-volt single phase, 50-60 Hz model is also available.
Refer to publication 24.06 The CG3500 tool connects directly to a 110-volt single phase, 50-60 Hz, 20-amp power source.
Refer to Section 17 - Pipe Preparation Tools for prices and where to call for purchase
information.

SECTION 11 – CPVC Products
CPVC Products

Products for CPVC/PVC Pipe
Style 356 Installation-Ready™ Transition Coupling
Couplings for CPVC/PVC Pipe

Installation-Ready™ STYLE 356 - GRADE “EHP” GASKET
COUPLING COUPLING
Transition Coupling COMPLETE † COMPLETE †
Approx. With Grade “EHP” With Grade “O”
STYLE 356 PIPE Wgt. Ea. Gasket Gasket SPARE PARTS
CPVC/PVC to Steel Nom. Outside Size §
Refer to publication 33.06 Size Dia. lb Painted Galv. Painted Galv. No. inches
2 2.375 2.6 $80.50 $95.00 + + 2 ⅜ x 2½
2½ 2.875 3.5 91.50 110.00 + + 2 ⅜ x 2½
3 3.500 4.3 101.00 120.50 + + 2 ½ x 3
4 4.500 5.9 142.00 170.50 + + 2 ½ x 3¼
6 6.625 8.1 239.50 288.00 + + 2 ½ x 3¼
8 8.625 17.6 381.00 459.00 + + 2 ¾ x 5
10 10.750 22.8 692.00 830.50 + + 2 ¾ x 6¼
12 12.750 24.9 840.00 1008.00 + + 2 ¾ x 6¼
NOTE: The Style 356 transition coupling uses the Style 107N gasket.
Style 357 Installation-Ready™ Rigid Coupling
Installation-Ready™ STYLE 356 - GRADE “EHP” GASKET
Approx. COUPLING COUPLING

Rigid Coupling Wgt. Ea. COMPLETE † COMPLETE †
With Grade “EHP” With Grade “O”
STYLE 357 PIPE Gasket Gasket SPARE PARTS
Refer to publication 33.07 inches Price Each Price Each Plated Bolt & Nut
Size Dia. lb Painted Galv. Painted Galv. No. inches
2 2.375 3.3 $76.50 $91.50 + + 2 ⅜ x 2½
2½ 2.875 3.6 86.50 102.50 + + 2 ⅜ x 2½
3 3.500 4.4 98.00 116.50 + + 2 ½ x 3
4 4.500 6.1 137.00 163.50 + + 2 ½ x 3¼
6 6.625 8.8 229.00 275.00 + + 2 ½ x 3¼
8 8.625 18.1 362.00 434.00 + + 2 ¾ x 5
10 10.750 23.5 658.50 790.00 + + 2 ¾ x 6¼
12 12.750 25.6 790.00 948.50 + + 2 ¾ x 6¼
NOTE: The Style 357 rigid coupling uses the Style 107N gasket.

Style 358 Reducing Coupling
Reducing Coupling STYLE 356 - GRADE “E” GASKET
COUPLING COUPLING
STYLE 358 COMPLETE † COMPLETE †
Approx. With Grade “E” With Grade “O”
Refer to publication 33.08 PIPE Wgt. Ea. Gasket Gasket SPARE PARTS
Nominal Size Price Each Price Each Plated Bolt & Nut
Size §
inches lb Painted Galv. Painted Galv. No. Inches
2½ x 2 3.8 $91.50 $110.00 + + 2 ⅜ x 2½
3 x 2 5.1 101.00 120.50 + + 2 ½ x 3
2½ 4.8 101.00 120.50 + + 2 ½ x 3
4 x 2 6.8 142.00 170.50 + + 2 ½ x 3¼
2½ 6.8 142.00 170.50 + + 2 ½ x 3¼
3 6.9 142.00 170.50 + + 2 ½ x 3¼
6 x 4 9.6 239.50 288.00 + + 2 ½ x 3¼
8 x 6 22.5 381.00 459.00 + + 2 ¾ x 5
10 x 8 29.2 692.00 830.50 + + 2 ¾ x 6¼
NOTE: The Style 358 reducing coupling uses the Style 750 gasket.

Products for CPVC/PVC Pipe in Potable Water Applications
Style 856 Installation-Ready™ Transition Coupling for Potable Water Applications
Couplings for CPVC/PVC Pipe in Potable Water Applications

Installation-Ready™ STYLE 856 – GRADE “P” GASKET
COUPLING
Transition Coupling COMPLETE
for Potable Water PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
Applications inches Price Each Plated Bolt & Nut
Size
STYLE 856 Nom. Size Outside Dia. lb Painted No. inches
2 2.375 2.6 $80.50 2 ⅜ x 2½
CPVC/PVC to Steel
2½ 2.875 3.5 91.50 2 ⅜ x 2½
3 3.500 4.3 101.00 2 ½ x 3
4 4.500 5.9 142.00 2 ½ x 3¼
6 6.625 8.1 239.50 2 ½ x 3¼
8 8.625 17.6 381.00 2 ¾ x 5
10 10.750 22.8 692.00 2 ¾ x 6¼
12 12.750 24.9 840.00 2 ¾ x 6¼
NOTE: The Style 856 transition coupling uses the Style 807N gasket.
Style 857 Installation-Ready™ Rigid Coupling for Potable Water Applications
Installation-Ready™ STYLE 857 – GRADE “P” GASKET
COUPLING
Rigid Coupling COMPLETE
for Potable Water PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
Applications inches Price Each Plated Bolt & Nut
Size
STYLE 857 Nom. Size Outside Dia. lb Painted No. inches
Refer to publication 33.17 2 2.375 3.3 $76.50 2 ⅜ x 2½
2½ 2.875 3.6 86.50 2 ⅜ x 2½
3 3.500 4.4 98.00 2 ½ x 3
4 4.500 6.1 137.00 2 ½ x 3¼
6 6.625 8.8 229.00 2 ½ x 3¼
8 8.625 18.1 362.00 2 ¾ x 5
10 10.750 23.5 658.50 2 ¾ x 6¼
12 12.750 25.6 790.00 2 ¾ x 6¼
NOTE: The Style 857 rigid coupling uses the Style 807N gasket.

Products for CPVC/PVC Pipe in Potable Water Applications
Style 858 Reducing Coupling for Potable Water Applications
Reducing Coupling STYLE 858 – GRADE “P” GASKET
COUPLING
for Potable Water COMPLETE †
Applications PIPE
Approx.
Wgt. Ea.
With Grade “P”
Gasket SPARE PARTS
STYLE 858 Nominal Size Price Each Plated Bolt & Nut
Refer to publication 33.18 Size
inches lb Painted No. Inches
2½ x 2 3.8 $91.50 2 ⅜ x 2½
3 x 2 5.1 101.00 2 ½ x 3
2½ 4.8 101.00 2 ½ x 3
4 x 2 6.8 142.00 2 ½ x 3¼
2½ 6.8 142.00 2 ½ x 3¼
3 6.9 142.00 2 ½ x 3¼
6 x 4 9.6 239.50 2 ½ x 3¼
8 x 6 22.5 381.00 2 ¾ x 5
10 x 8 29.2 692.00 2 ¾ x 6¼
NOTE: The Style 858 reducing coupling uses the Style 875 gasket.

No. 350 90° Elbow
PGS-300 Grooved End Fittings

90° Elbow Approx.
Nom. Size Wgt. Ea.
NO. 350 inches lb Price Each
Refer to publication 33.03 2 1.3 (f ) $104.50
2½ 0.8 52.50
3 1.4 75.50
4 2.1 183.00
6 6.0 313.50
8 10.8 725.00
10 46.1 (f ) 2894.00
12 75.8 (f ) 3978.00
(f) = Fabricated fitting
No. 351 45° Elbow
45° Elbow Approx.

Nom. Size Wgt. Ea.
2½ 0.6 47.00
3 0.8 64.50
4 1.3 164.50
6 3.4 276.00
8 6.2 634.50
10 39.6 (f ) 2676.50
12 50.7 (f ) 3942.00
No. 352 Tee
Tee Approx.
Nom. Size Wgt. Ea.
2½ 1.3 57.50
3 1.9 86.00
4 2.8 214.50
6 7.8 381.00
8 13.8 869.50
10 68.0 (f ) 3291.50
12 89.4 (f ) 4248.50

No. 353 Reducing Tee Groove x Groove x Groove
Reducing Tee Size

inches
NO. 353 Run x Branch Price Each
2½ x 2½ x 2 *
(Groove x Groove x Groove)
3 x 3 x 2 *
2½ *
4 x 4 x 2 *
2½ *
3 *
6 x 6 x 2 *
2½ *
3 $587.00
4 *
8 x 8 x 4 1041.50
6 *
10 x 10 x 4 *
6 (f) 4031.00
8 *
12 x 12 x 6 *
8 (f) 5785.50
10 (f) 5785.50
*These sizes are created using a combination of No. 352 Tees or No. 353 Reducing Tees and Style 358/858 Reducing Couplings.
Please refer to publication 33.03 for details.

No. 354 Reducing Tee Groove x Groove x Socket
Reducing Tee Approx.

Size Wgt. Each
NO. 354 inches
Run x Branch lb Price Each
(Groove x Groove x Socket) 2 x 2 x 1 1.7 (f ) $285.50
Refer to publication 33.03 1¼ 1.9 (f ) 285.50
1½ 1.7 (f ) 285.50
2 1.5 (f ) +
2½ x 2½ x 1 1.7 (b) 222.00
1¼ 1.6 (b) 222.00
1½ 1.6 (b) 222.00
2 1.4 112.50
3 x 3 x 1 2.3 (b) 249.00
1¼ 2.2 (b) 249.00
1½ 2.2 (b) 249.00
2 2.0 154.00
4 x 4 x 1 3.5 (b) 405.50
1¼ 3.5 (b) 405.50
1½ 3.5 (b) 405.50
2 3.3 324.00
6 x 6 x 1 8.1 (b) 627.00
1¼ 8.0 (b) 627.00
1½ 8.0 (b) 627.00
2 7.8 547.50
8 x 8 x 1 14.0 (b) 1092.50
1¼ 13.9 (b) 1092.50
1½ 13.9 (b) 1092.50
2 13.7 1011.00
10 x 10 x 2 41.2 (f ) +
12 x 12 x 2 55.0 (f ) +
(b) = Bushing
No. 359F Flange Adapter
Flange Adapter Approx.

Nom. Size Wgt. Ea.
NO. 359F inches lb Price Each
2 1.0 (f ) $137.00
(Groove x Flange) 2½ 1.5 (f ) 208.00
Refer to publication 33.03 3 1.8 (f ) 232.00
4 3.0 (f ) 330.50
6 4.8 (f ) 544.50
8 7.0 (f ) 1267.00
10 12.0 (f ) 4272.50
12 18.5 (f ) 6244.50

No. 361 Reducing Adapter
Reducing Adapter Approx.

Size Wgt. Ea.
2½ x 2 0.7 (f ) $183.00
(Groove x Socket) 3 x 2 1.0 (f ) 306.50

Style 355 PGS-300 Expansion Joint
PGS-300 Expansion Joint

STYLE 355
STYLE 355 – PGS-300 EXPANSION JOINT
COUPLING COUPLING
COMPLETE with COMPLETE with
COUPLING COMPLETE with Grade “EHP” or Grade “EHP” or
Grade “EHP” or “O” Gasket “O” Gasket and “O” Gasket and
and Carbon Steel Bolts & Coated* Carbon Stainless Steel
Nominal Rated Length Approx. Nuts Steel Bolts & Nuts Bolts & Nuts
Size Movement Compressed Neutral Expanded Wgt. Ea. Price Each Price Each Price Each
“EHP”
“EHP” “O” or “O”
inches lb Painted Painted Galv. Painted Galv. Painted Galv.
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 3.5 $2631.00 + + + + + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 6.6 2762.00 + + + + + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 9.6 2892.50 + + + + + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 12.7 3022.50 + + + + + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 15.7 3151.50 + + + + + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 18.8 3281.50 + + + + + +
2
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 21.8 3412.50 + + + + + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 24.9 3542.00 + + + + + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 28.0 3674.00 + + + + + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 31.0 3802.50 + + + + + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 34.1 3932.50 + + + + + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 37.1 4064.00 + + + + + +
0.35 9.17 ± 0.07 9.38 ± 0.08 9.62 ± 0.06 4.2 2696.50 + + + + + +
0.75 12.34 ± 0.12 12.76 ± 0.14 13.23 ± 0.11 7.6 2842.50 + + + + + +
1.15 15.51 ± 0.17 16.14 ± 0.21 16.85 ± 0.15 11.0 2988.50 + + + + + +
1.55 18.68 ± 0.22 19.52 ± 0.27 20.47 ± 0.19 14.4 3135.50 + + + + + +
1.95 21.86 ± 0.28 22.90 ± 0.33 24.09 ± 0.24 17.8 3280.50 + + + + + +
2.35 25.03 ± 0.33 26.27 ± 0.39 27.70 ± 0.28 21.2 3426.50 + + + + + +
2½
2.75 28.20 ± 0.38 29.65 ± 0.45 31.32 ± 0.32 24.7 3572.50 + + + + + +
3.15 31.37 ± 0.43 33.03 ± 0.52 34.94 ± 0.36 28.1 3719.00 + + + + + +
3.55 34.54 ± 0.48 36.41 ± 0.58 38.55 ± 0.41 31.5 3865.00 + + + + + +
3.95 37.71 ± 0.53 39.79 ± 0.64 42.17 ± 0.45 34.9 4012.50 + + + + + +
4.35 40.88 ± 0.58 43.17 ± 0.70 45.79 ± 0.49 38.3 4157.00 + + + + + +
4.75 44.05 ± 0.63 46.55 ± 0.76 49.40 ± 0.54 41.7 4303.00 + + + + + +
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 5.3 2772.00 + + + + + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 9.7 2956.50 + + + + + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 14.1 3142.50 + + + + + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 18.4 3326.00 + + + + + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 22.8 3511.00 + + + + + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 27.1 3696.50 + + + + + +
3
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 31.5 3881.00 + + + + + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 35.8 4065.00 + + + + + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 40.2 4250.50 + + + + + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 44.6 4435.00 + + + + + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 48.9 4619.00 + + + + + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 53.3 4801.00 + + + + + +

* Fluoropolymer top coat. See publication 33.05 for more information.


STYLE 355
COUPLING COUPLING
“EHP”
0.35 11.22 ± 0.07 11.46 ± 0.08 11.74 ± 0.06 8.3 $3130.00 + + + + + +
0.75 14.44 ± 0.12 14.92 ± 0.14 15.47 ± 0.11 14.6 3347.00 + + + + + +
1.15 17.66 ± 0.17 18.39 ± 0.21 19.21 ± 0.15 20.9 3564.50 + + + + + +
1.55 20.88 ± 0.22 21.85 ± 0.27 22.94 ± 0.19 27.2 3781.50 + + + + + +
1.95 24.10 ± 0.28 25.31 ± 0.33 26.68 ± 0.24 33.5 4000.50 + + + + + +
2.35 27.31 ± 0.33 28.77 ± 0.39 30.41 ± 0.28 39.9 4218.00 + + + + + +
4
2.75 30.53 ± 0.38 32.23 ± 0.45 34.15 ± 0.32 46.2 4435.00 + + + + + +
3.15 33.75 ± 0.43 35.70 ± 0.52 37.88 ± 0.36 52.5 4652.50 + + + + + +
3.55 36.97 ± 0.48 39.16 ± 0.58 41.62 ± 0.41 58.8 4869.50 + + + + + +
3.95 40.19 ± 0.53 42.62 ± 0.64 45.35 ± 0.45 65.2 5086.50 + + + + + +
4.35 43.41 ± 0.58 46.08 ± 0.70 49.09 ± 0.49 71.5 5303.50 + + + + + +
4.75 46.63 ± 0.63 49.54 ± 0.76 52.82 ± 0.54 77.8 5522.00 + + + + + +
0.35 13.22 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 14.2 4279.50 + + + + + +
0.75 16.45 ± 0.13 16.93 ± 0.14 17.47 ± 0.11 23.8 4593.00 + + + + + +
1.15 19.67 ± 0.19 20.40 ± 0.21 21.21 ± 0.15 33.4 4904.50 + + + + + +
1.55 22.89 ± 0.24 23.86 ± 0.27 24.94 ± 0.19 43.0 5216.50 + + + + + +
1.95 26.12 ± 0.30 27.33 ± 0.33 28.68 ± 0.24 52.6 5530.00 + + + + + +
2.35 29.34 ± 0.35 30.80 ± 0.39 32.41 ± 0.28 62.2 5842.00 + + + + + +
6
2.75 32.56 ± 0.41 34.26 ± 0.45 36.15 ± 0.32 71.8 6155.50 + + + + + +
3.15 35.78 ± 0.46 37.73 ± 0.52 39.88 ± 0.36 81.4 6467.00 + + + + + +
3.55 39.01 ± 0.52 41.19 ± 0.58 43.62 ± 0.41 91.0 6779.50 + + + + + +
3.95 42.23 ± 0.57 44.66 ± 0.64 47.35 ± 0.45 100.6 7091.00 + + + + + +
4.35 45.45 ± 0.62 48.13 ± 0.70 51.09 ± 0.49 110.2 3454.50 + + + + + +
4.75 48.68 ± 0.68 51.59 ± 0.76 54.82 ± 0.54 119.8 7715.50 + + + + + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 26.4 5199.50 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 45.9 5682.00 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 65.4 6166.00 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 84.9 6647.00 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 104.4 7129.50 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 123.9 7611.00 + + + + + +
8
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 143.4 8093.50 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 162.8 8576.50 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 182.3 9058.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 201.8 9541.50 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 221.3 10024.50 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 240.8 10505.00 + + + + + +



STYLE 355
COUPLING COUPLING
“EHP”
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 36.0 $6072.50 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 61.7 6860.00 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 87.3 7647.00 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 113.0 8436.00 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 138.7 9224.00 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 164.3 10012.50 + + + + + +
10
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 190.0 10687.50 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 215.7 11587.50 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 241.3 12375.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 267.0 13164.00 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 292.7 13951.50 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 318.4 14739.00 + + + + + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 43.5 6597.00 + + + + + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 72.7 7525.50 + + + + + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 102.0 8456.00 + + + + + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 131.2 9385.00 + + + + + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 160.5 10314.00 + + + + + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 189.7 11244.00 + + + + + +
12
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 218.9 12173.50 + + + + + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 248.2 13102.00 + + + + + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 277.4 14032.50 + + + + + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 306.7 14961.50 + + + + + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 335.9 15891.00 + + + + + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 365.2 16793.00 + + + + + +

C E A N 355 P E Z
Size
Class in/DN Movement Length Style Finish Gasket Bolts and Nuts
C E- 2/50 A- 0.35 C - Compressed 355 P - Painted E - EPDM Z - Plated
F- 2½ B- 0.75 N - Neutral G - Galvanized O - Fluoroelastomer X - Stainless Steel
H- 3/80 C- 1.15 E - Expanded B - Fluoropolymer
J - 4/100 D- 1.55 Coated
M- 6/150 E- 1.95
O- 8/200 F- 2.35
P- 10/250 G- 2.75
Q- 12/300 H- 3.15
I - 3.55
J - 3.95
K- 4.35
L- 4.75

Style 355P PGS-300 Expansion Joint for Potable Water Applications
PGS-300 Expansion Joint for

STYLE 355P
STYLE 355P – PGS-300 EXPANSION JOINT FOR POTABLE WATER APPLICATIONS
COUPLING COUPLING COUPLING

COMPLETE COMPLETE COMPLETE
with Grade with Grade with Grade
“P” Gasket “P” Gasket “P” Gasket
and Carbon and Coated* and Stainless
Steel Bolts & Carbon Steel Steel Bolts &
Rated Length Approx. Wgt. Nuts Bolts & Nuts Nuts
Nominal Size Movement Compressed Neutral Expanded Ea. Price Each
inches lb Painted
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 3.5 $2631.00 + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 6.6 2762.00 + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 9.6 2892.50 + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 12.7 3022.50 + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 15.7 3151.50 + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 18.8 3281.50 + +
2
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 21.8 3412.50 + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 24.9 3542.00 + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 28.0 3674.00 + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 31.0 3802.50 + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 34.1 3932.50 + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 37.1 4064.00 + +
0.35 9.17 ± 0.07 9.38 ± 0.08 9.62 ± 0.06 4.2 2696.50 + +
0.75 12.34 ± 0.12 12.76 ± 0.14 13.23 ± 0.11 7.6 2842.50 + +
1.15 15.51 ± 0.17 16.14 ± 0.21 16.85 ± 0.15 11.0 2988.50 + +
1.55 18.68 ± 0.22 19.52 ± 0.27 20.47 ± 0.19 14.4 3135.50 + +
1.95 21.86 ± 0.28 22.90 ± 0.33 24.09 ± 0.24 17.8 3280.50 + +
2.35 25.03 ± 0.33 26.27 ± 0.39 27.70 ± 0.28 21.2 3426.50 + +
2½
2.75 28.20 ± 0.38 29.65 ± 0.45 31.32 ± 0.32 24.7 3572.50 + +
3.15 31.37 ± 0.43 33.03 ± 0.52 34.94 ± 0.36 28.1 3719.00 + +
3.55 34.54 ± 0.48 36.41 ± 0.58 38.55 ± 0.41 31.5 3865.00 + +
3.95 37.71 ± 0.53 39.79 ± 0.64 42.17 ± 0.45 34.9 4012.50 + +
4.35 40.88 ± 0.58 43.17 ± 0.70 45.79 ± 0.49 38.3 4157.00 + +
4.75 44.05 ± 0.63 46.55 ± 0.76 49.40 ± 0.54 41.7 4303.00 + +
0.35 9.17 ± 0.07 9.41 ± 0.08 9.69 ± 0.06 5.3 2772.00 + +
0.75 12.34 ± 0.12 12.83 ± 0.14 13.37 ± 0.11 9.7 2956.50 + +
1.15 15.51 ± 0.17 16.24 ± 0.21 17.06 ± 0.15 14.1 3142.50 + +
1.55 18.68 ± 0.22 19.66 ± 0.27 20.75 ± 0.19 18.4 3326.00 + +
1.95 21.86 ± 0.28 23.07 ± 0.33 24.44 ± 0.24 22.8 3511.00 + +
2.35 25.03 ± 0.33 26.48 ± 0.39 28.12 ± 0.28 27.1 3696.50 + +
3
2.75 28.20 ± 0.38 29.90 ± 0.45 31.81 ± 0.32 31.5 3881.00 + +
3.15 31.37 ± 0.43 33.31 ± 0.52 35.50 ± 0.36 35.8 4065.00 + +
3.55 34.54 ± 0.48 36.73 ± 0.58 39.18 ± 0.41 40.2 4250.50 + +
3.95 37.71 ± 0.53 40.14 ± 0.64 42.87 ± 0.45 44.6 4435.00 + +
4.35 40.88 ± 0.58 43.55 ± 0.70 46.56 ± 0.49 48.9 4619.00 + +
4.75 44.05 ± 0.63 46.97 ± 0.76 50.24 ± 0.54 53.3 4801.00 + +



STYLE 355P
STYLE 355P – PGS-300 EXPANSION JOINT FOR POTABLE WATER APPLICATIONS

inches lb Painted
0.35 11.22 ± 0.07 11.46 ± 0.08 11.74 ± 0.06 8.3 $3130.00 + +
0.75 14.44 ± 0.12 14.92 ± 0.14 15.47 ± 0.11 14.6 3347.00 + +
1.15 17.66 ± 0.17 18.39 ± 0.21 19.21 ± 0.15 20.9 3564.50 + +
1.55 20.88 ± 0.22 21.85 ± 0.27 22.94 ± 0.19 27.2 3781.50 + +
1.95 24.10 ± 0.28 25.31 ± 0.33 26.68 ± 0.24 33.5 4000.50 + +
2.35 27.31 ± 0.33 28.77 ± 0.39 30.41 ± 0.28 39.9 4218.00 + +
4
2.75 30.53 ± 0.38 32.23 ± 0.45 34.15 ± 0.32 46.2 4435.00 + +
3.15 33.75 ± 0.43 35.70 ± 0.52 37.88 ± 0.36 52.5 4652.50 + +
3.55 36.97 ± 0.48 39.16 ± 0.58 41.62 ± 0.41 58.8 4869.50 + +
3.95 40.19 ± 0.53 42.62 ± 0.64 45.35 ± 0.45 65.2 5086.50 + +
4.35 43.41 ± 0.58 46.08 ± 0.70 49.09 ± 0.49 71.5 5303.50 + +
4.75 46.63 ± 0.63 49.54 ± 0.76 52.82 ± 0.54 77.8 5522.00 + +
0.35 13.22 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 14.2 4279.50 + +
0.75 16.45 ± 0.13 16.93 ± 0.14 17.47 ± 0.11 23.8 4593.00 + +
1.15 19.67 ± 0.19 20.40 ± 0.21 21.21 ± 0.15 33.4 4904.50 + +
1.55 22.89 ± 0.24 23.86 ± 0.27 24.94 ± 0.19 43.0 5216.50 + +
1.95 26.12 ± 0.30 27.33 ± 0.33 28.68 ± 0.24 52.6 5530.00 + +
2.35 29.34 ± 0.35 30.80 ± 0.39 32.41 ± 0.28 62.2 5842.00 + +
6
2.75 32.56 ± 0.41 34.26 ± 0.45 36.15 ± 0.32 71.8 6155.50 + +
3.15 35.78 ± 0.46 37.73 ± 0.52 39.88 ± 0.36 81.4 6467.00 + +
3.55 39.01 ± 0.52 41.19 ± 0.58 43.62 ± 0.41 91.0 6779.50 + +
3.95 42.23 ± 0.57 44.66 ± 0.64 47.35 ± 0.45 100.6 7091.00 + +
4.35 45.45 ± 0.62 48.13 ± 0.70 51.09 ± 0.49 110.2 3454.50 + +
4.75 48.68 ± 0.68 51.59 ± 0.76 54.82 ± 0.54 119.8 7715.50 + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 26.4 5199.50 + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 45.9 5682.00 + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 65.4 6166.00 + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 84.9 6647.00 + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 104.4 7129.50 + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 123.9 7611.00 + +
8
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 143.4 8093.50 + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 162.8 8576.50 + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 182.3 9058.50 + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 201.8 9541.50 + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 221.3 10024.50 + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 240.8 10505.00 + +



STYLE 355P
STYLE 355 – PGS-300 EXPANSION JOINT FOR POTABLE WATER APPLICATIONS

inches lb Painted
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 36.0 $6072.50 + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 61.7 6860.00 + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 87.3 7647.00 + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 113.0 8436.00 + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 138.7 9224.00 + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 164.3 10012.50 + +
10
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 190.0 10687.50 + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 215.7 11587.50 + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 241.3 12375.50 + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 267.0 13164.00 + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 292.7 13951.50 + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 318.4 14739.00 + +
0.35 13.23 ± 0.08 13.47 ± 0.08 13.74 ± 0.06 43.5 6597.00 + +
0.75 16.46 ± 0.13 16.95 ± 0.14 17.49 ± 0.11 72.7 7525.50 + +
1.15 19.69 ± 0.19 20.42 ± 0.21 21.23 ± 0.15 102.0 8456.00 + +
1.55 22.92 ± 0.24 23.90 ± 0.27 24.97 ± 0.19 131.2 9385.00 + +
1.95 26.16 ± 0.30 27.37 ± 0.33 28.72 ± 0.24 160.5 10314.00 + +
2.35 29.39 ± 0.35 30.84 ± 0.39 32.46 ± 0.28 189.7 11244.00 + +
12
2.75 32.62 ± 0.41 34.32 ± 0.45 36.20 ± 0.32 218.9 12173.50 + +
3.15 35.85 ± 0.46 37.79 ± 0.52 39.94 ± 0.36 248.2 13102.00 + +
3.55 39.08 ± 0.52 41.27 ± 0.58 43.69 ± 0.41 277.4 14032.50 + +
3.95 42.31 ± 0.57 44.74 ± 0.64 47.43 ± 0.45 306.7 14961.50 + +
4.35 45.54 ± 0.62 48.21 ± 0.70 51.17 ± 0.49 335.9 15891.00 + +
4.75 48.77 ± 0.68 51.69 ± 0.76 54.92 ± 0.54 365.2 16793.00 + +

C E A N 355 H P Z
Size
Class In./DN Movement Length Style Finish Gasket Bolts and Nuts
C E - 2/50 A - 0.35 C - Compressed 355P H - Blue Enamel P - Fluoroelastomer Blend Z - Plated
F - 21/2 B - 0.75 N - Neutral X - Stainless Steel
H - 3/80 C - 1.15 E - Expanded B - Fluoropolymer
J - 4/100 D - 1.55 Coated
M - 6/150 E - 1.95
O - 8/200 F - 2.35
P - 10/250 G - 2.75
Q - 12/300 H - 3.15
I - 3.55
J - 3.95
K - 4.35
L - 4.75

CG1100 Cut Grooving Tool for CPVC/PVC Pipe
Cut Grooving Tool for CPVC/PVC Pipe

CG1100 The CG1100 Cut Grooving Tool was designed to cut a radius PGS-300 groove into CPVC/PVC
pipe. Refer to Section 17 – Pipe Preparation Tools for prices and where to call for purchase
CUT GROOVING TOOL FOR CPVC/
information.
PVC PIPE

SECTION 12 – Copper Connection Products
Copper Products

Copper Connection for Grooved Copper Tubing
The Copper Connection Grooved Piping System

Gasket Selection Please see Gasket Selection Guide or publication 05.01 for available gasket compounds and
service guidelines.
Style 607 QuickVic™ Rigid Coupling for Copper Tubing
QuickVic™ Rigid STYLE 607 – GRADE “P”, “EHP” OR “T” GASKET
Approx. COUPLING COMPLETE SPARE PARTS

Coupling for Copper PIPE Weight With Grade “P”, “EHP” Grade “P”, “EHP” or “T”
Tubing inches Each or “T” Gasket Gasket
Nominal Size lb Painted Price Each
STYLE 607 2 1.9 $115.00 $92.00
Refer to publication 22.13 2½ 2.1 127.50 100.00
3 3.0 143.00 104.50
4 3.3 214.00 150.50
5 5.5 356.50 246.00
6 5.8 470.50 323.50
8 7.7 725.50 514.50
NOTE: Grade P is for potable water systems; Grade EHP is for non-potable water systems; and Grade T is for oil-related services.
Style 644 Installation-Ready™ Transition Coupling for Copper Tubing to Stainless Steel Pipe
Installation-Ready™ STYLE 644 – GRADE “P” OR “EHP” GASKET
COUPLING
Transition Coupling COMPLETE
for Copper Tubing to Approx.
Weight
With Grade
“P” or “EHP”
Stainless Steel Pipe Actual Outside Diameter Each Gasket SPARE PARTS
Stainless Steel
STYLE 644 Nominal Size Pipe Copper Tubing
Refer to publication 22.44 inches inches lb Price Each
2 2.375 2.125 2.4 $170.50 $94.50
2½ 2.875 2.625 2.6 191.00 102.50
3 3.500 3.125 3.5 214.00 107.00
4 4.500 4.125 4.2 320.00 150.50 NR
6 6.625 6.125 7.2 703.00 323.50
NOTE: Grade P is for potable water systems and Grade EHP is for non-potable water systems.
NR
Non-returnable

Style 622 Mechanical-T Bolted Branch Outlet for Copper Tubing
Mechanical-T Bolted STYLE 622 – GRADE “P,” “E” OR “T” GASKET
Approx.
Branch Outlet for Weight MECHANICAL-T COMPLETE
Copper Tubing Run x Branch Each With Grade “P,” “E” or “T” Gasket
Nominal Size
STYLE 622 inches lb Price Each
Refer to publication 22.12 2½ x ¾ 3.1 $425.50
1 3.2 486.50
1½ 4.1 596.50
3 x ¾ 3.4 473.50
1 3.6 506.00
1½ 4.5 627.00
4 x ¾ 3.3 533.50
1 4.0 563.00
1½ 5.0 680.50
Style 622 Mechanical-T Cross Assembly for Copper Tubing
Mechanical-T Cross STYLE 622 CROSS – GRADE “P,” “E” OR “T” GASKET
Approx.
Assembly for Copper Weight MECHANICAL-T Cross COMPLETE
Tubing Run x Branch Each With Grade “P,” “E” or “T” Gasket
Nominal Size
STYLE 622 CROSS inches lb Price Each
Refer to publication 22.12 2½ x ¾ 4.2 $774.00
1 4.4 918.00
1½ 6.2 1178.50
3 x ¾ 4.4 821.00
1 4.8 950.50
1½ 6.6 1238.00
4 x ¾ 4.5 998.00
1 5.4 1060.50
1½ 7.4 1313.50

Style 641 Vic-Flange Adapter for Copper Tubing
Vic-Flange Adapter for STYLE 641 – GRADE “P,” “E” OR “T” GASKET
Approx. Grade “P,” “E” Vic-Flange

Copper Tubing Nominal Actual Outside Weight Each or “T” Gasket Washers
Size Diameter lb Price Each Price Each Price Each
STYLE 641 2 2.125 3.8 $848.00 $75.00 $117.50 NR
2½ 2.625 4.7 883.00 82.50 127.00 NR
To connect grooved copper to
flanged equipment 3 3.125 5.4 925.50 88.50 136.00 NR
Refer to publication 22.03 4 4.125 7.7 1012.50 112.00 215.50 NR
5 5.125 9.3 1361.00 134.50 232.50 NR
6 6.125 10.3 1481.50 154.00 263.50 NR
NR
Non-returnable
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing.
Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an
adequate mating surface. In such cases, it is recommended that a phenolic (Type F) flange washer be
inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing
surface.
Typical applications where a Victaulic flange washer should be used are:
1.When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange and
then the flange washer is inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth
or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange
adapters and the rubber faced flange.
4.When mating C.I. flanges to IPS flanges: the flange washer is placed between the two Victaulic flange
adapters. If one flange is not a Victaulic flange adapter (e.g., flanged valve), then a flanged gasket must be
placed adjacent to that flange and the flange washer must be inserted between the flange gasket and
the Victaulic flange adapter.
5.When mating to components (valves, strainer, etc.) where the component flange face has an insert:
follow the same arrangement as in #1 above.

Grooved End Copper Fittings
No. 610 90° Elbow, No. 611 45° Elbow
Copper Connection Fittings

Elbows COPPER FITTING – 90° ELBOW OR 45° ELBOW
Nominal 90° Elbow 45° Elbow

Refer to publication 22.04 Size No. 610 No. 611
Approx. Approx.
inches lb Price Each lb Price Each
2 0.9 $195.00 0.8 $195.00
No. 610 No. 611 2½ 1.3 211.00 1.1 211.00
3 4.1 294.00 1.6 294.00
4 6.7 673.00 3.4 673.00
5 15.0 1902.00 10.0 1902.00
6 20.0 3036.00 13.0 3036.00
8 26.0 5698.00 15.6 5698.00
No. 620 Tee, No. 660 Cap
Tee and Cap COPPER FITTING – TEE OR CAP
Nominal Tee Cap

Refer to publication 22.04 Size No. 620 No. 660
Approx. Approx.
2 1.1 $317.00 1.2 $135.00
No. 620 No. 660 2½ 1.8 337.50 1.4 199.00
3 3.2 501.50 1.4 246.00
4 6.1 1096.00 2.4 368.50
5 18.5 3062.00 3.5 414.50
6 25.5 3784.00 4.2 752.00
8 45.0 6755.50 – –
No. 625 Reducing Tee Groove x Groove x Groove
Reducing Tee COPPER FITTING – REDUCING TEE – GRV X GRV X GRV
Approx.
NO. 625 Nominal Size Weight Each
Groove x Groove x Groove 2½ x 2½ x 2 1.6 $502.00
Refer to publication 22.04 3 x 3 x 2 2.1 646.00
2½ 2.4 851.00
4 x 4 x 2 5.3 1439.50
2½ 5.8 1439.50
3 6.3 1439.50
5 x 5 x 3 5.4 4388.50
4 8.8 4388.50
6 x 6 x 2½ 6.7 5357.00
3 8.1 5357.00
4 9.8 5357.00
5 11.3 5357.00

No. 626 Reducing Tee Groove x Groove x Cup
Reducing Tee COPPER FITTING – REDUCING TEE – GRV X GRV X CUP
Nominal Size Approx. Weight Each

2 x 2 x ¾ 0.8 $405.00
Groove x Groove x Cup 1 0.8 405.00
1¼ 0.9 405.00
1½ 0.9 405.00
2½ x 2½ x ¾ 1.0 516.00
1 1.2 504.00
1¼ 1.2 504.00
1½ 1.3 504.00
3 x 3 x ¾ 1.4 929.50
1 1.5 929.50
1¼ 1.7 929.50
1½ 1.7 929.50
4 x 4 x ¾ 2.8 1098.50
1 2.9 1439.50
1¼ 3.0 1439.50
1½ 3.2 1439.50
No. 643 Copper Adapter Nipple
Adapter Nipple COPPER FITTING – ADAPTER NIPPLE
Approx.
NO. 643 Weight
TUBE Each
Nominal Size
2 0.3 $101.50
2½ 0.4 106.00
3 0.6 110.50
4 0.7 112.50
No. 650 Concentric Reducer Groove x Groove x Groove
Concentric Reducer COPPER FITTING – CONCENTRIC REDUCER – GRV X GRV
Approx.
Groove x Groove 2½ x 2 1.00 $279.00
Refer to publication 22.04 3 x 2 0.95 279.00
2½ 1.03 279.00
4 x 2 1.65 568.00
2½ 1.95 568.00
3 2.02 568.00
5 x 3 6.30 1591.00
4 6.30 1591.00
6 x 3 6.40 1722.00
4 6.50 1722.00
5 6.70 1722.00
8 x 6 10.00 3022.00

No. 652 Concentric Reducer Groove x Cup
Concentric Reducer COPPER FITTING – CONCENTRIC REDUCER – GRV X CUP
Approx.
Groove x Cup 2 x 1 0.5 $231.00
Refer to publication 22.04 1¼ 0.5 231.00
1½ 0.5 231.00
2½ x 1 0.8 282.00
1¼ 0.6 282.00
1½ 0.7 282.00
2 0.7 282.00
3 x 1½ 1.1 349.50
2 1.0 349.50
4 x 2 2.0 647.00
Dielectric Waterway For copper tube CTS to carbon steel IPS connections, see Section 1 – Grooved IPS Pipe Fittings.
Transition Fittings

Series 608N Copper Connection Butterfly Valve
Copper Connection SERIES 608N WITH LEVER HANDLE OR GEAR OPERATOR
Copper Size Bare Valve Lever Operator Gear Operator

Butterfly Valve inches Price Each
2½ $1670.00 $2051.50 $3361.00
SERIES 608N
4 2470.00 2852.00 4159.50
6 3490.00 3876.00 5179.50
GDC-CTS Go/No-Go Groove Diameter Cable
GDC-CTS Go/No-Go Model Part Number Purchase Price

Groove Diameter Cable GDC-CTS Go/No-Go Groove Diameter Cable R051GDCASY $57.00
For 2 – 8” CTS Standard – Types

K, L, M Hard-Drawn Copper
Tubing Per ASTM B88 and
Drain-Waste-Vent (DWV) Per
ASTM B306

SECTION 13 - Aluminum Products
Aluminum
Products

Products for Grooved Aluminum Pipe
Aluminum Couplings
Aluminum Coupling Aluminum couplings and fittings available. Refer to publication 21.01 for Style 77A Coupling,
publication 21.02 for Style 78A Coupling, or publication 21.03 for Aluminum Fitting technical
STYLES 77A AND 78A
information. Contact Victaulic for product availability and pricing.
Style 77A
Style 78A
Aluminum Fittings
Aluminum Fittings
No. 10A Elbow No. 20A Tee

SECTION 14 - Stainless Steel Products
Stainless Steel
Products

Products for Grooved Stainless Steel Pipe
Ductile Iron Couplings for Stainless Steel Pipe
Style 89 Rigid Coupling
Ductile Iron Galvanized Coupling for Stainless Steel Applications

Please see Gasket Selection Guide or publication 05.01 for available gasket compounds and service guidelines.
Rigid Coupling STYLE 89 – GRADE “E” OR “T” GASKET
PIPE Approx.
STYLE 89 inches Wgt. Ea. Price Each PLATED BOLT & NUT
Refer to publication 17.24 COUPLING
COMPLETE † Galvanized
Galvanized With
With Grade “E” or
Grade “E” or “T”
Nominal Outside “T” Flush-Seal Size §
Size Dia. lb Gasket Gasket No. inches
2 2.375 3.1 $141.00 $192.00 2 ⅝ x 2¾
2½ 2.875 4.0 164.50 232.00 2 ⅝ x 3½
3 3.500 4.3 184.00 244.50 2 ⅝ x 3½
4 4.500 7.5 256.00 344.50 2 ¾ x 4¼
5 5.563 12.5 436.00 635.50 2 ¾ x 4¼
6 6.625 16.0 436.00 635.50 2 ⅞ x 5½
8 8.625 26.1 697.50 863.00 2 1 x 5½
10 10.750 32.8 1220.00 1434.00 2 1 x 6½
12 12.750 46.0 1416.50 1682.50 2 1 x 6½
NOTE: Painted Style 89 couplings available upon request. Contact our Engineered Product Group for details.
Style 889 Rigid Coupling for Potable Water Applications
Rigid Coupling STYLE 889 – GRADE “P” GASKET
Approx. COUPLING COMPLETE †

for Potable Water PIPE Wgt. Ea. With Grade “P” Gasket Spare Parts
Applications Nominal
Size Price Each Plated Bolt & Nut
STYLE 889 Size
Refer to publication 17.29 inches lb Painted Galv. No. Inches
2 3.1 $130.00 $141.00 2 ⅝ x 2¾
2½ 4.0 151.50 164.50 2 ⅝ x 3½
3 4.3 169.50 184.00 2 ⅝ x 3½
4 8.0 237.00 256.00 2 ¾ x 4¼
6 15.5 402.00 436.00 2 ⅞ x 5½
8 25.8 641.50 697.50 2 1 x 5½
10 34.7 1122.00 1220.00 2 1 x 6½
12 41.2 1303.50 1416.50 2 1 x 6½

Style W89 AGS Rigid Coupling
Rigid Coupling AGS STYLE W89 – GRADE “E” OR “T” FLUSH-SEAL™ GASKET
PIPE Approx.
inches Wgt.Ea. Price Each PLATED BOLT & NUT
(FOR STAINLESS STEEL PIPE)
COUPLING
STYLE W89
COMPLETE † COUPLING
Refer to publication 20.15 Galvanized COMPLETE †
With Galvanized
Grade “E” or With
“T” Grade “L”
Nominal Outside Flush-Seal Flush-Seal Size §
Size Dia. lb Gasket Gasket No. inches
14 14.000 65.0 $1537.50 $3446.50 2 1⅛ x 5½
16 16.000 80.0 2004.00 3939.00 2 1⅛ x 5½
18 18.000 93.0 2319.00 4252.50 2 1⅛ x 5½
20 20.000 114.0 2753.50 4604.50 2 1⅛ x 5½
24 24.000 190.0 4064.50 5580.00 2 1⅛ x 5½

Stainless Steel and Duplex Couplings
Stainless Steel and Duplex Couplings

NOTE: For ½ – 2” stainless steel pipe refer to Section 9 Vic-Press™ System for Schedule 10S Stainless Steel Pipe
Rigid Coupling STYLE 489 – GRADE “E” OR “T” GASKET
PIPE Approx. STAINLESS STEEL

STYLE 489 inches Weight Ea. Price Each BOLT & NUT
CF8M COUPLING
Refer to publication 17.25 COUPLING COMPLETE †
COMPLETE † With Grade “E”
Nominal Outside With Grade “E” or “T” Flush- Size §
Size Dia. lb or “T” Gasket Seal Gasket No. inches Price Each
1½ 1.900 1.6 $352.50 $399.00 2 ⅜ x 2½ $159.50
2 2.375 1.6 393.50 459.00 2 ⅜ x 2½ 159.50
2½ 2.875 1.9 432.50 490.00 2 ⅜ x 2½ 159.50
3 3.500 2.8 482.50 538.50 2 ½ x 2¾ 224.00
4 4.500 4.0 608.50 688.00 2 ½ x 2¾ 224.00
6 6.625 14.5 1402.00 1888.00 2 ⅞ x 5½ 492.50
1½ – 4” 8 8.625 22.8 2919.50 3070.50 2 1 x 5½ 644.50
10 10.750 28.4 3441.00 3633.50 2 1 x 6½ 638.50
12 12.750 36.6 4842.00 5077.00 2 1 x 6½ 638.50
6 – 12”
Style W489 AGS Stainless Steel Rigid Coupling
AGS Stainless Steel STYLE W489 – GRADE “E” OR “T” GASKET

Rigid Coupling inches Weight Ea. Price Each BOLT & NUT
COUPLING
STYLE W489 COMPLETE †
Refer to publication 20.17 Nominal With Grade “E” Size §
Size Outside Dia. lb or “T” Gasket No. inches
14 14.000 65.0 $5211.50 2 1⅛ x 5½
16 16.000 80.0 7860.50 2 1⅛ x 5½
18 18.000 93.0 7935.50 2 1⅛ x 5½
20 20.000 114.0 9126.00 2 1⅛ x 5½

Style 489DX Duplex Rigid Coupling
Duplex Rigid Coupling STYLE 489DX – GRADE “E” OR “E” GASKET OR FLUSH-SEAL™ GASKET
STAINLESS STEEL BOLTS,

STYLE 489DX PIPE Approx. SILICON BRONZE NUTS,
Inches Weight Ea. Price Each STAINLESS STEEL WASHERS
CE8MN
COMPLETE † With Grade “E”
Nominal Outside With Grade “E” or “T” Flush- Size §
Size Dia. lb or “T” Gasket Seal Gasket No. Inches Price Each
2 2.375 3.0 $465.00 $556.50 2 ½ x 2¾ $159.50
2½ 2.875 3.9 509.50 589.50 2 ⅝ x 3½ 159.50
3 3.500 4.6 571.00 644.00 2 ⅝ x 3½ 224.00
4 4.500 8.5 717.00 827.50 2 ¾ x 4¼ 224.00
6 6.625 15.5 1719.00 1888.00 2 ⅞ x 5½ 492.50
8 8.625 24.0 3449.50 3634.50 2 1 x 5½ 644.50
10 10.750 33.0 4062.00 4304.50 2 1 x 6½ 638.50
12 12.750 40.0 5717.50 6008.50 2 1 x 6½ 638.50
Flexible Coupling STYLE 475 – GRADE “EW” OR “T” GASKET OR FLUSH-SEAL™ GASKET
Pipe Approx. STAINLESS STEEL

STYLE 475 inches Weight Each Price Each BOLT & NUT
CF8M COUPLING
(FORMERLY NAMED STYLE 471) COMPLETE †
COUPLING With
Refer to publication 17.14 COMPLETE † Grade “E” or
With “T”
Grade “EW” Flush-Seal Size §
Nominal Size lb or “T” Gasket Gasket No. inches Price Each
1 1.6 $270.50 $321.50 2 ⅜ x 2 $159.50
1¼ 2.4 316.50 360.50 2 ⅜ x 2 159.50
1½ 2.6 352.50 398.50 2 ⅜ x 2 159.50
2 1.7 393.50 459.00 2 ⅜ x 2 159.50
2½ 1.9 432.50 490.00 2 ⅜ x 2 159.50
3 2.8 482.50 538.50 2 ½ x 2¾ 224.00
4 4.0 608.50 688.00 2 ½ x 2¾ 224.00

Style 475DX Duplex Flexible Coupling
Duplex Flexible STYLE 475DX – GRADE “EW” OR “E” GASKET OR FLUSH-SEAL™ GASKET

Coupling Inches Weight Each Price Each BOLT & NUT
COUPLING
STYLE 475DX COUPLING COMPLETE †
CE8MN COMPLETE † With
Refer to publication 17.34 With Grade “E”
Grade “EW” Flush-Seal Size §
Nominal Size lb Gasket Gasket No. Inches Price Each
1 1.3 $320.00 $395.00 2 ⅜ x 2 $159.50
1¼ 1.4 372.00 435.00 2 ⅜ x 2 159.50
1½ 1.5 416.00 478.00 2 ⅜ x 2 159.50
2 1.7 465.00 556.50 2 ⅜ x 2 159.50
2½ 1.9 510.50 589.50 2 ⅜ x 2 159.50
3 2.9 571.00 644.00 2 ½ x 2¾ 224.00
4 4.2 717.00 827.50 2 ½ x 2¾ 224.00
Style 77DX Duplex Flexible Coupling
Flexible Coupling STYLE 77DX – GRADE “EW”, “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET
Approx.
STYLE 77DX Pipe Wgt. Each Price Each Spare Parts
CE8MN COUPLING STAINLESS STEEL BOLTS, SILICON
Refer to publication 17.20 COUPLING COMPLETE † BRONZE NUTS, STAINLESS STEEL
inches COMPLETE † With Grade WASHERS
With Grade “EW” or “T”
Outside “EW” or “T” Flush-Seal Size §
Nom. Size Diameter lb Gasket Gasket No. inches Price Each
¾ 1.050 1.2 $550.00 $596.00 2 ⅜ x 2 $159.50
1 1.315 1.8 578.50 623.00 2 ⅜ x 2 159.50
1¼ 1.660 2.0 644.00 691.50 2 ⅜ x 2 159.50
1½ 1.900 2.3 602.00 648.50 2 ⅜ x 2 159.50
2 2.375 3.0 746.50 792.50 2 ⅜ x 2 159.50
2½ 2.875 3.1 763.00 822.50 2 ⅜ x 2 159.50
3 3.500 4.7 810.50 867.00 2 ½ x 2¾ 224.00
4 4.500 6.8 1204.00 1281.50 2 ⅝ x 3½ 224.00
6 6.625 8.5 2003.00 2180.50 2 ¾ x 4¼ 324.50
† Coupling less gasket is additional. Contact Victaulic for details.
NOTE: This product is supplied standard in CE8MN Duplex Stainless Steel. Reference submittal 17.20 for details.
All other sizes are supplied in Type 316 Stainless Steel, see chart below.

Style 77S Flexible Coupling
Flexible Coupling STYLE 77S – GRADE “E”, “EW” OR “T” GASKET OR FLUSH-SEAL™ GRADE “E”, “EW” OR “T” GASKET

STYLE 77S inches Wgt. Each Price Each BOLT & NUT
COMPLETE † With Grade
With Grade “E” or “T”
Nominal Outside “EW” or “T” Flush-Seal Size §
Size Diameter lb Gasket Gasket No. inches Price Each
¾ 1.050 1.2 $231.50 + 2 ⅜ x 2 $159.50
1 1.315 1.6 384.00 + 2 ⅜ x 2 159.50
1¼ 1.660 2.4 449.50 + 2 ⅜ x 2 159.50
1½ 1.900 2.6 500.50 + 2 ⅜ x 2 159.50
2 2.375 3.0 559.00 + 2 ⅜ x 2 159.50
2½ 2.875 3.1 614.00 + 2 ⅜ x 2 159.50
3 3.500 4.7 684.00 + 2 ½ x 2¾ 224.00
4 4.500 6.8 863.00 + 2 ½ x 2¾ 224.00
6 6.625 8.5 1989.50 + 2 ⅝ x 3¼ 324.50
8 8.625 23.5 4151.50 $4306.50 2 ⅞ x 5 492.50
10 10.750 33.0 4869.00 5070.00 2 1 x 6 518.50
12 12.750 35.0 6695.50 6941.50 2 1 x 6½ 638.50
14 14.000 37.0 7348.00 7534.00 2 1 x 6½ 686.50
16 16.000 53.0 11083.00 11339.50 4 1 x 5½ +
18 18.000 62.0 11241.00 11798.00 4 1 x 5½ +
Stainless Steel Flange Adapters

Stainless Steel STYLE 441 – STAINLESS STEEL VIC-FLANGE ADAPTERS
Approx.
Vic-Flange Adapter PIPE Weight Each
STYLE 441 2 3.0 $390.50
Refer to publication 17.27 2½ 4.3 469.00
3 4.8 516.00
4 6.9 677.50
6 9.5 851.50
For spare parts see page 22.

No. 445F and No. 445R Stainless Steel Flange Adapter Nipples
Stainless Steel Flange NO. 445F AND NO. 445R – STAINLESS STEEL FLANGE ADAPTER
Approx.
Adapter Nipples Nominal Size End to End Weight Each No 445F No. 445R
NO. 445F AND NO. 445R
Inches Inches lb Type 304L Type 316L Type 304L Type 316L
1¼ 4.00 3.3 $926.00 + – –
1½ 4.00 3.9 1108.50 + $926.00 –
2 4.00 6.2 1108.50 + 1108.50 $1129.00
2½ 4.00 9.9 + + + +
3 4.00 11.4 1609.50 $1738.00 1609.50 1738.00
No. 445F 4 6.00 18.4 2250.00 2429.50 2250.00 2429.50
ANSI B16.5 Class 150 5 6.00 21.3 + + + +
Flat Face
6 6.00 27.5 3028.50 3238.50 3028.50 3238.50
8 6.00 41.3 4134.00 4954.50 4134.00 4954.50
10 8.00 59.8 5637.00 + 5318.00 6182.00
12 8.00 88.2 9337.50 11903.00 9337.50 11903.00
No. 445R + Quoted on application. Contact Victaulic for pricing and availability.
ANSI B16.5 Class 150
Raised Face

Style 422 Branch Outlet
Stainless Steel STYLE 422 BRANCH OUTLET
Size Complete Mechanical-T Spare Parts

Mechanical-T Branch Grooved Branch Threaded Branch
Outlet Stainless
Stainless Steel
STYLE 422 Steel Upper
Refer to publication 17.02 Upper Housing,
Stainless Steel Housing, Stainless Standard
Upper Housing, Galvanized Steel Grade
Galvanized Lower Approx. Lower Lower Bolts & Nuts “E”
Inches Housing Wgt. Ea. Housing Housing Size Gaskets
Approx.
Wgt. Ea. Price Price Price
Run x Brch. lb Each lb Each Inches Each
2 x ¾ – – 3.0 $255.50 $414.00 ½ x 2¾ +
1 – – 3.0 255.50 414.00 ½ x 2¾ $33.50
2½ x ¾ – – 3.2 292.00 454.00 ½ x 2¾ +
1 – – 3.2 292.00 454.00 ½ x 2¾ +
Grooved Branch
3 x ¾ – – 3.4 328.50 454.00 ½ x 2¾ +
1 – – 3.4 328.50 454.00 ½ x 2¾ 33.50
1½ – – 5.0 365.00 584.00 ½ x 2¾ +
2 4.6 $389.00 5.3 365.00 750.50 ½ x 3¼ 39.00
4 x ¾ – + 5.1 + 732.00 ½ x 3¼ +
1 – 402.50 5.0 + 732.00 ½ x 3¼ 33.50
1½ – – 5.6 447.00 774.50 ½ x 3¼ +
2 4.6 475.50 6.0 447.00 848.50 ½ x 3¼ 39.00
3 6.4 473.00 6.4 – – ½ x 3¼ 47.00
6 x ¾ – – 9.1 548.50 2306.00 ⅝ x 5 +
1 – – 9.0 548.50 2306.00 ⅝ x 5 33.50
Threaded Branch
1½ – – 8.3 609.00 2356.50 ⅝ x 5 +
2 5.6 648.50 8.9 609.00 2356.50 ⅝ x 5 39.00
3 8.4 623.50 8.4 – – ¾ x 5 47.00
4 10.1 648.50 10.1 – – ¾ x 5 62.00
8 x ¾ – – 13.4 903.50 1449.50 ¾ x 4¼ +
1 – – 13.3 903.50 1448.50 ¾ x 4¼ 33.50
1½ – – 12.6 903.50 1448.50 ¾ x 4¼ 39.00
2 11.6 963.00 11.8 903.50 1448.50 ¾ x 4¼ 44.50
3 11.6 954.00 11.6 – – ¾ x 4¼ 47.00
4 12.5 925.50 12.5 – – ¾ x 4¼ 62.00
10 x ¾ – – 17.0 + 1768.50 ¾ x 4¼ +
1 – – 16.8 + 1768.50 ¾ x 4¼ +
1½ – – 16.2 + 1768.50 ¾ x 4¼ +
2 – – 15.4 + 1768.50 ¾ x 4¼ +

No. A10S Stainless Steel Riser Anchor
Stainless Steel Riser NO. A10S STAINLESS STEEL RISER ANCHOR
Approx.
Anchor Nominal Size Weight Each
NO. A10S
2 14.0 $1712.00
2½ 18.0 1910.00
3 24.0 1975.50
4 32.0 3029.00
5 40.0 3292.00
6 80.0 3622.00
8 100.0 4213.50
10 145.0 5398.50
12 178.3 6057.00
No. A40S Stainless Steel Riser Anchor for Tight Spaces
Stainless Steel Riser NO. A40S STAINLESS STEEL RISER ANCHOR FOR TIGHT SPACES
Approx.
Anchor for Tight Nominal Size Weight Each
Spaces inches lb Price Each
2 10.1 $2433.50
NO. A40S 2½ 14.3 2558.50
4 25.9 3158.00
5 33.9 3432.00
6 59.9 3775.50
8 81.9 4393.50
10 121.5 5628.50
12 146.8 6315.00

ANSI Sch. 10S Stainless Steel Fittings
Schedule 10S Stainless Steel Fittings
No. 410 SS 90° Elbow, No. 411 SS 45° Elbow
Standard Schedule 10S, Type 304L and Type 316L Stainless Steel Fittings
Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.
Nominal
Refer to publication 17.16 Size 90° Elbow No. 410 SS 45° Elbow No. 411 SS
Approx. Approx.
Weight Center to Weight Center to
Each End Price Each Each End Price Each
Type Type Type Type
Inches lb Inches 304L 316L lb Inches 304L 316L
No. 410 SS
1 0.6 2.88 – $222.00 0.6 2.00 – $202.00
1¼ 0.8 3.13 – 226.00 0.8 2.00 – 203.00
1½ 1.0 3.50 – 226.50 1.0 2.13 – 206.50
2 1.6 4.50 – 254.00 2.4 2.75 – 226.50
No. 411 SS 2½ 2.2 5.00 – 343.50 2.2 2.88 – 297.50
3 1.3 4.50 $332.00 411.50 1.3 2.00 $306.00 378.00
4 2.3 6.00 472.50 587.50 2.3 2.50 436.00 541.00
6 5.5 9.00 1241.00 1548.50 5.5 3.75 820.00 1024.00
8 11.0 12.00 2154.50 2689.00 11.0 5.00 1401.00 1749.50
10 18.5 15.00 4250.50 5310.50 18.5 6.25 3272.50 3828.00
12 28.4 18.00 6660.50 8321.50 28.4 7.50 4515.00 5644.50
Note: 1 – 2½” available as Type 316 stainless only.
No. W410 90° Elbow, No. W411 45° Elbow
AGS Elbows AGS ELBOWS – 90° ELBOW OR 45° ELBOW
Nom.
Refer to publication 17.05 Size 90° Elbow No. W410 45° Elbow No. W411
Wgt. Ea. C-E Type Type Wgt. Ea. C-E Type Type
14 102.0 24.00 + + 83.0 11.75 + +
16 123.5 27.00 + + 101.0 13.00 + +
No. W410 No. W411 18 281.0 30.00 + + 129.0 14.25 + +
14 – 24” 14 – 24” 20 350.0 33.00 + + 165.3 15.50 + +
with Welded with Welded 24 503.7 39.00 + + 264.5 18.00 + +
Tangents Tangents

No. 412 SS 22½° Elbow, No. 413 SS 11¼° Elbow
Elbows † ELBOWS – 22½° ELBOW OR 11¼° ELBOW
Nominal
Refer to publication 17.16 Size 22½° Elbow No. 412 SS 11¼° Elbow No. 413 SS
Approx. Approx.
Weight Center to Weight Center to
Each End Price Each Each End Price Each
Type Type Type Type
No. 412 SS ¾ – 1.63 + + – 1.38 + +
1 0.5 1.63 + + 0.2 1.38 + +
1¼ 0.6 1.75 + + 0.4 1.38 + +
1½ 0.6 1.75 + + 0.4 1.38 + +
2 1.0 1.88 + + 0.7 1.38 + +
No. 413 SS
2½ 1.4 2.00 + + 0.7 1.50 + +
3 1.7 2.25 + + 1.2 1.50 + +
4 2.8 2.88 + + 1.8 1.75 + +
6 5.8 3.18 + + 3.4 2.00 + +
8 9.2 3.88 + + 4.6 2.00 + +
10 13.6 4.38 + + 5.3 2.13 + +
12 19.2 4.88 + + 14.1 2.25 + +
† Fittings are segmentally welded stainless steel.
No. 420 SS Tee
Tee TEE
Nominal Approx.
Refer to publication 17.16 Size Weight Each Center to End Price Each
inches lb Inches Type 304L Type 316L
1 0.7 2.25 $660.00 $687.00
1¼ 1.5 3.13 772.50 +
1½ 2.2 3.38 – 641.00
No. 420 SS 2 2.4 2.75 – 671.00
2½ 3.7 3.13 – 818.00
3 3.1 3.75 847.00 1057.50
4 4.9 4.50 907.00 1132.50
6 11.7 5.88 1761.50 2470.00
8 20.4 7.75 2600.50 4590.50
10 34.4 8.88 5083.50 11721.00
12 52.4 10.38 7660.00 14942.00
No. 20 SS Tees are Schedule 10S, Type 304L or 316L stainless steel from A403CR/S9.
No. W420 AGS Tee
AGS Tee AGS TEE
Aprx
Refer to publication 17.05 Nom. Size Wgt. Ea. Tee - No. W420
Price Each
Inches lb Type 304L Type 316L
14 102.0 + +
16 123.5 + +
No. W420
18 281.0 + +
20 350.0 + +
24 503.7 + +

No. 425 SS Reducing Tee
Reducing Tee REDUCING TEES
Approx. Center to Center to

SCHEDULE 10S 304/316 Nominal Size Weight Each End Run End Branch Price Each
inches lb inches inches Type 304L Type 316L
Segmentally welded – not a CR 1½ x 1½ x ¾ 1.3 2.75 2.75 $567.00 $826.00
class fitting. 1 1.4 2.75 2.75 579.50 711.00
Refer to publication 17.16 1¼ 1.5 2.75 2.75 591.50 727.50
2 x 2 x ¾ 2.0 3.25 3.25 610.00 750.00
1 2.1 3.25 3.25 623.50 735.00
1¼ 2.3 3.25 3.25 701.00 953.00
1½ 2.4 2.75 2.75 792.00 953.00
No. 425 SS 2½ x 2½ x ¾ 2.8 3.75 3.75 720.00 +
1 3.0 3.75 3.75 793.00 974.00
1½ 3.5 3.75 3.75 895.50 978.00
2 3.5 3.07 3.07 + 963.00
3 x 3 x ¾ 4.0 4.25 4.25 715.00 857.50
1 4.1 4.25 4.25 795.00 910.00
1¼ 4.2 4.25 4.25 940.50 1120.00
1½ 4.3 4.25 4.25 978.00 1175.50
2 3.1 3.75 3.23 1047.50 +
2½ 3.1 3.75 3.23 1009.00 1255.00
4 x 4 x 1 5.0 5.00 5.00 1346.00 +
1¼ 5.3 5.00 5.00 + +
1½ 5.6 5.00 5.00 + +
2 4.4 4.47 3.82 1186.50 1419.50
2½ 4.9 4.47 3.82 1264.00 1518.00
3 4.9 4.47 3.88 1393.00 1737.00
6 x 6 x 2 11.6 6.50 6.50 2600.50 2960.00
2½ 12.1 6.50 6.50 + +
3 8.8 5.91 4.88 1795.00 2239.00
4 9.5 5.91 5.12 2224.00 2653.50
8 x 8 x 2½ 17.5 7.75 7.75 2969.00 4498.50
3 18.0 7.75 7.75 + +
4 18.1 7.79 6.31 5235.50 6250.50
6 18.5 7.79 6.62 6863.00 8413.00
10 x 10 x 3 29.0 9.00 9.00 4011.00 +
4 30.0 9.00 9.00 4115.50 5024.00
6 28.2 8.89 7.70 8373.50 10674.00
8 31.3 8.89 8.59 8448.00 10765.50
12 x 12 x 6 43.0 10.00 10.00 6249.50 +
8 40.1 10.39 9.51 12067.50 15061.50
10 47.6 10.39 9.89 14424.50 18000.50

No. W425 Reducing Tee
AGS Reducing AGS REDUCING TEE
Approx.
Tee Size Wgt. Each AGS Reducing Tee No. W425
Inches Price Each
SCHEDULE 10S 304/316
Run x Branch lb Type 304L Type 316L
Segmentally welded – not a CR 14 x 14 x 4 101.4 + +
class fitting. 6 101.4 + +
Refer to publication 17.05 8 102.5 + +
10 105.1 + +
12 108.1 + +
16 x 16 x 4 126.2 + +
6 126.2 + +
No. W425
8 127.4 + +
10 129.8 + +
12 132.5 + +
14 134.6 + +
18 x 18 x 6 160.0 + +
8 161.0 + +
10 163.1 + +
12 165.6 + +
14 167.6 + +
16 168.2 + +
20 x 20 x 6 197.0 + +
8 198.5 + +
10 200.5 + +
12 202.9 + +
14 204.7 + +
16 205.0 + +
18 208.4 + +
24 x 24 x 6 260.9 + +
8 270.0 + +
10 271.7 + +
12 273.8 + +
14 275.4 + +
16 275.3 + +
18 278.1 + +
20 282.1 + +

No. 430 SS 45° Lateral, No. 433 SS True Wye, No. 435 SS Cross
45° Lateral, NO. 430 SS 45° LATERAL, NO. 433 SS TRUE WYE AND NO. 435 SS CROSS
Nominal
True Wye and Cross Size 45° Lateral No. 430 SS True Wye No. 433 SS Cross No. 435 SS
Weight Weight Weight
Each Price Each Each Price Each Each Price Each
Type Type Type Type Type Type
Inches lb 304L 316L lb 304L 316L lb 304L 316L
¾ 0.8 + + 0.6 + + 0.7 + +
1 1.4 + + 0.9 + + 1.1 + +
1¼ 1.9 + + 1.2 + + 1.6 + +
No. 430 SS
1½ 2.6 + + 1.4 + + 1.9 + +
2 3.3 + + 1.8 + + 2.7 + +
2½ 5.3 + + 2.5 + + 3.6 + +
3 6.5 + + 3.4 + + 5.8 + +
4 11.2 + + 5.1 + + 8.0 + +
6 20.9 + + 10.7 + + 13.4 + +
No. 433 SS
8 33.1 + + 16.6 + + 22.1 + +
10 47.5 + + 31.6 + + 54.9 + +
12 79.2 + + 38.4 + + 52.8 + +
No. 435 SS
No(s). 442 SS and 443 SS Adapter Nipples
Adapter Nipples
Same prices apply for:
No. 442 SS – Grooved x Beveled
No. 443 SS – Grooved x Grooved
Refer to publication 17.16 No. 442 SS No. 443 SS
Grv. x Bev. Grv. x Grv.
Nom. Price Per Length – Inches

Size 3 4 6 8 10 12
Type Type Type Type Type Type Type Type Type Type Type Type
Inches 304L 316L 304L 316L 304L 316L 304L 316L 304L 316L 304L 316L
¾ $124.00* $132.00* $127.00 $137.00 $175.50 $155.00 $162.50 $185.00 $175.00 $198.50 $187.50 $222.00
1 126.00* 136.50* 152.00 146.00 171.00 165.00 200.50 197.50 215.50 212.00 231.00 236.50
1¼ 149.00 151.50 149.00* 151.50 162.50 170.50 190.50 204.00 204.00 218.50 218.50 244.50
1½ 154.00 168.00 154.00* 168.00* 172.50* 246.00 203.00 246.00 217.50 264.50 233.00 295.00
2 161.00 184.00 161.00* 184.00* 175.00 218.00 205.00 261.00 220.00 280.00 235.50 312.50
2½ 176.50 200.50 176.50* 200.50* 176.50 226.50 207.50 271.50 223.00 291.50 295.00 325.00
3 230.00 231.00 204.00* 231.00* 230.00 410.50 270.00 292.50 290.50 314.00 398.50 349.50
4 244.00* 275.00 243.50* 275.00 244.00* 260.50* 287.00 312.50 308.00 335.00 441.50 374.50
6 264.50* 307.50 264.50 307.50* 264.50* 307.50* 310.50 370.50 333.00 398.00 650.00 444.00
8 – – 317.00 463.00 317.00* 498.00* 373.00 597.00 400.00 641.00 429.00 715.00
10 – – 542.00 640.00 542.00 688.00 542.00* 716.00* 985.50 768.50 1057.50 857.00
12 – – 688.00 812.00 688.00 874.00 689.50* 871.50* 739.50 935.50 793.00 1043.00

* Standard nipple length per Victaulic publication 17.16.

No(s). W442, W443 and W449 AGS Adapter Nipples
AGS Adapter AGS ADAPTER NIPPLES –

NO. W442 AGS GROOVED X BEVELED,
NO. W443 AGS GROOVED X AGS GROOVED, OR
Nipples NO. W449 AGS GROOVED X ORIGINAL GROOVED
Refer to publication 17.05 Approx. AGS Adapter Nipples – No. W442,

Nom. Size Length Wgt. Ea. W443, W449
Price Each
Inches Inches * lb Type 304L Type 316L
No. W442 14 8 36.0 + +
AGS Grooved x Beveled 16 8 42.0 + +
18 8 47.0 + +
20 8 52.0 + +
24 8 63.0 + +
No. W443 NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
AGS Grooved x AGS Grooved
Please specify nipple style number when ordering.
* Other lengths available. Contact Victaulic for details.
No. W449
AGS Grooved x Original Grooved
No. 450 SS Concentric Reducer
Nominal Approx.
SCHEDULE 10S 304/316 Size Weight Each Price Each
Refer to publication 17.16 inches lb Type 304L Type 316L
1½ x ¾ 1.3 $528.50 $1130.00
1 1.4 + 477.50
1¼ 1.5 455.50 497.00
No. 450 SS 2 x ¾ 2.0 601.00 836.00
1 2.1 332.50 392.00
1¼ 2.3 920.00 1163.00
1½ 1.3 + 451.00
2½ x 1 3.0 1200.50 1390.00
1¼ 2.8 + 951.00
1½ 2.3 – +
2 1.7 + 565.50
3 x 1 4.0 948.50 1235.50
1¼ 4.1 1362.00 +
1½ 4.2 927.00 1106.00
2 1.6 296.50 438.00
2½ 1.5 244.00 302.00
4 x 2 3.9 395.00 689.50
2½ 5.8 541.00 1016.50
3 2.0 282.00 351.50
6 x 2½ 6.8 4530.50 5725.50
3 4.0 907.00 1130.50
4 4.2 689.50 858.50
8 x 4 5.3 3296.50 4119.50
6 7.0 1731.00 2159.00
10 x 6 8.8 4082.00 5102.50
8 11.5 4561.50 5700.00
12 x 8 13.2 6212.50 7763.50
10 17.0 5710.00 7133.00

No. W450 AGS Concentric Reducer
AGS Concentric AGS CONCENTRIC REDUCER
Approx.
Reducer Size Wgt. Ea. AGS Concentric Reducer No. W450
Price Each
14 x 6 32.3 + +
8 35.4 + +
10 38.7 + +
12 42.1 + +
No. W450 16 x 6 39.3 + +
8 42.4 + +
10 44.7 + +
12 47.1 + +
14 50.1 + +
18 x 10 50.7 + +
12 54.1 + +
14 56.1 + +
16 59.1 + +
20 x 12 81.7 + +
14 84.7 + +
16 89.7 + +
18 93.7 + +
24 x 10 102.6 + +
12 107.9 + +
14 110.9 + +
16 113.9 + +
18 117.9 + +
20 124.5 + +

No. 451 SS Eccentric Reducer
Eccentric Reducer ECCENTRIC REDUCER
Nominal Approx.
SCHEDULE 10S 304/316 Size Weight Each Price Each
Refer to publication 17.16 inches lb Type 304L Type 316L
1½ x ¾ 1.3 $2165.00 +
1 1.4 894.00 $1026.50
1¼ 1.5 + +
No. 451 SS 2 x ¾ 2.0 + +
1 2.1 1787.00 1787.00
1¼ 2.3 1921.50 2050.50
1½ 2.5 1015.00 1076.50
2½ x 1 2.8 – –
1½ 3.0 1233.50 1502.50
2 3.5 1233.50 1502.50
3 x 1 4.0 + +
1¼ 4.1 + +
1½ 4.2 + +
2 4.3 1247.00 1357.00
2½ 4.5 1268.00 1455.00
4 x 2 4.8 3335.00 4834.00
2½ 5.8 1554.00 2640.00
3 5.9 2589.50 3232.00
6 x 2½ 6.8 4530.50 +
3 6.9 7480.00 +
4 7.0 2732.50 3996.00

No. W451 AGS Eccentric Reducer
AGS Eccentric AGS ECCENTRIC REDUCER
Approx.
Reducer Size Wgt. Ea. AGS Eccentric Reducer No. W451
Price Each
14 x 6 32.3 + +
8 35.4 + +
10 38.7 + +
12 42.1 + +
No. W451 16 x 6 39.3 + +
8 42.4 + +
10 44.7 + +
12 47.1 + +
14 50.1 + +
18 x 10 50.7 + +
12 54.1 + +
14 56.1 + +
16 59.1 + +
20 x 12 81.7 + +
14 84.7 + +
16 89.7 + +
18 93.7 + +
24 x 10 102.6 + +
12 107.9 + +
14 110.9 + +
16 113.9 + +
18 117.9 + +
20 124.5 + +
No. W445R AGS Flanged Adapter Nipple
AGS Flanged AGS FLANGED ADAPTER NIPPLES – ANSI 150 RAISED FACE
Approx. AGS Flanged Adapter Nipple –

Adapter Nipple Nom. Size Length Wgt. Ea. No. W445R
Refer to publication 17.05 Price Each
Inches Inches lb Type 304L Type 316L
14 8 122.0 + +
16 8 136.0 + +
18 8 168.0 + +
No. W445R 20 8 208.0 + +
24 8 274.0 + +

No. 460 SS Cap
Cap CAP
Nominal
TYPE 304/316 Size No. 460 SS
Refer to publication 17.16 Approx. Weight
Each Thickness “T” Price Each
inches inches inches Type 304L Type 316L
¾ 0.1 0.75 + $213.00
1 0.2 0.75 + 190.00
1¼ 0.3 0.75 + 223.50
No. 460 SS 1½ 0.4 0.75 + 232.50
2 0.6 1.13 + 320.00
2½ 0.9 1.13 + 332.50
3 1.1 1.00 + 598.50
4 1.8 1.13 + 762.00
6 4.0 1.75 + 909.50
8 7.0 2.25 + 2140.50
10 17.8 2.75 + 2801.00
12 26.7 3.25 + 3259.50
No. W460 AGS Cap
AGS Cap AGS CAP
Approx.
Nom. Size Wgt. Ea. AGS Cap No. W460
TYPE 304/316
Price Each
14 33.2 + +
16 41.2 + +
18 54.6 + +
No. W460
20 67.5 + +
24 96.0 + +

Schedule 40S Stainless Steel Fittings
No. 410H SS 90° Elbow, No. 411H SS 45° Elbow
Standard Schedule 40S, Type 304L and Type 316L Stainless Steel Fittings
Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.
Nominal
Refer to publication 17.16 Size 90° Elbow No. 410H-SS 45° Elbow No. 411H-SS
Approx. Approx.
Weight Each Price Each Weight Each Price Each
Inches lb Type 304L Type 316L lb Type 304L Type 316L
1 0.7 $706.50 $882.00 0.6 $670.50 $837.50
No. 410H SS 1¼ 1.3 717.00 895.50 0.9 681.50 850.00
1½ 1.4 720.00 898.50 1.1 685.50 856.00
2 2.5 1258.50 1574.00 2.4 1244.00 1553.50
2½ 3.8 1430.00 1787.00 2.8 1400.00 +
3 5.4 1688.50 2119.50 4.1 1570.50 1963.50
No. 411H SS
4 12.0 2160.00 2715.00 4.8 1934.50 2416.00
6 29.3 3964.50 4978.50 17.0 3139.50 3923.50
8 59.0 6156.00 7692.50 34.0 4846.00 6058.00
10 99.0 10464.50 13079.00 58.3 7362.50 9043.50
12 142.0 14189.50 17736.00 85.0 7284.50 9106.00
No. 412H SS 22½° Elbow, No. 413H SS 11¼° Elbow
Elbows † ELBOWS – 22½° ELBOW OR 11¼° ELBOW
Nominal
Refer to publication 17.16 Size 22½° Elbow No. 412H-SS 11¼° Elbow No. 413H-SS
Approx. Approx.
Weight Each Price Each Weight Each Price Each
Inches lb Type 304L Type 316L lb Type 304L Type 316L
¾ – + + – + +
1 0.6 + + 0.3 + +
No. 412H SS
1¼ 0.8 + + 0.5 + +
1½ 0.8 + + 0.5 + +
2 1.4 + + 1.0 + +
2½ 2.3 + + 1.1 + +
No. 413H SS 3 3.1 + + 2.1 + +
4 5.6 + + 3.6 + +
6 12.2 + + 7.0 + +
8 20.0 + + 10.1 + +
10 30.0 + + 11.8 + +
12 40.0 + + 29.3 + +
† Fittings are segmentally welded stainless steel.

No. 420H SS Tee
Tee NO. 420H SS TEE
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each Price Each
1 0.9 $1761.00 $2200.00
1¼ 1.5 1787.00 2233.50
1½ 1.7 1812.50 2265.50
No. 420H SS 2 2.5 2019.50 2524.00
2½ 4.7 2123.00 2653.00
3 7.0 2432.50 3041.50
4 13.0 3571.50 4463.00
6 26.4 6157.00 7694.00
8 46.1 6725.50 8406.00
10 71.5 15588.00 19485.50
12 100.0 19872.00 24838.50
No. 425H SS Reducing Tee
Reducing Tee NO. 425H SS REDUCING TEE
Approx.
Refer to publication 17.16 Nominal Size Weight Each Price Each
2 x 2 x 1 2.5 $2486.50 $3108.00
1¼ 2.8 2794.50 3492.00
1½ 3.2 3157.50 3946.00
No. 425H SS 2½ x 2½ x 1½ 4.4 + +
2 4.5 3983.50 4979.00
3 x 3 x 1½ 4.5 3906.00 +
2 5.2 4180.50 4979.00
2½ 5.6 4512.50 5640.00
4 x 4 x 2 10.2 4739.00 5923.50
2½ 10.5 + +
3 11.6 5561.50 6951.00
6 x 6 x 2 22.0 6463.00 –
3 22.4 6463.00 8079.50
4 22.8 6667.00 8333.50
8 x 8 x 3 35.0 – –
4 45.0 9374.50 11716.50
6 43.0 12619.50 15774.00
10 x 10 x 4 63.0 – –
6 68.3 16008.50 20010.00
8 71.0 16148.00 +
12 x 12 x 6 73.0 – –
8 75.0 22592.50 28240.00
10 77.0 26999.50 +

No. 430H SS 45° Lateral, No. 433H SS True Wye, No. 435H SS Cross
45° Lateral, True Wye NO. 430H SS 45° LATERAL, NO. 433H SS TRUE WYE AND NO. 435H SS CROSS
Nominal
and Cross Size 45° Lateral No. 430H SS True Wye No. 433H SS Cross No. 435H SS
Weight Weight Weight
Each Price Each Each Price Each Each Price Each
Type Type Type Type Type Type
Inches Lbs 304L 316L lb 304L 316L lb 304L 316L
¾ 1.0 + + 0.7 + + 0.9 + +
1 1.7 + + 1.1 + + 1.3 + +
1¼ 2.5 + + 1.5 + + 2.1 + +
No. 430H SS
1½ 3.5 + + 1.8 + + 2.5 + +
2 4.6 + + 2.5 + + 3.8 + +
2½ 9.0 + + 4.3 + + 6.1 + +
3 11.7 + + 6.1 + + 10.5 + +
4 22.2 + + 10.0 + + 15.8 + +
6 43.6 + + 22.3 + + 28.0 + +
No. 433H SS
8 72.0 + + 36.0 + + 48.0 + +
10 105.0 + + 69.9 + + 121.5 + +
12 165.0 + + 80.0 + + 110.0 + +
No. 435H SS
No. 440H SS Adapter Nipples
Adapter Nipples
No. 440H SS – Grooved x Threaded
No. 440H SS
Grv. x Thd.

Size 3 4 6 8 10 12
¾ $165.00* $171.00* $168.00 $176.50 $175.50 $187.50 $200.50 $217.00 $206.00 $226.50 $213.00 $237.00
1 164.00* 175.50* 165.00 181.50 171.00 194.50 194.50 228.00 200.50 241.00 206.00 254.50
1¼ 170.00 214.00 170.00* 214.00 176.50 399.50 203.00 291.50 208.50 319.50 217.00 349.50
1½ 200.50 218.00 200.50* 218.00* 218.00 246.00 256.00 295.00 275.00 324.00 217.00 353.00
2 200.50 218.00 200.50* 218.00* 218.00* 246.00 257.50 295.00 276.50 324.00 295.00 353.00
2½ 205.00 228.00 205.00 228.00* 270.00 259.50 391.00 312.50 324.50 345.00 340.00 378.00
3 230.00 325.00 230.00 325.00 266.00 410.50 324.00 515.50 360.50 600.00 396.50 682.50
4 – – 291.50 441.50 291.50* 441.50* 353.00 543.00 398.50 647.50 440.00 736.00
6 – – + + + + + + + + + +
8 – – + + + + + + + + + +
10 – – – – – – – – – – – –
12 – – – – – – – – – – – –


No(s). 442H SS and 443H SS Adapter Nipples
Adapter Nipples
Same prices apply for:
No. 442H SS – Grooved x Beveled
No. 443H SS – Grooved x Grooved
Refer to publication 17.16 No. 442H SS No. 443H SS
Grv. x Bev. Grv. x Grv.

Size 3 4 6 8 10 12
¾ $165.00 $171.00 $168.00 $176.50 $ 175.50 $187.50 $200.50 $217.00 $206.00 $225.50 $213.00 $237.00
1 164.00 175.50* 165.00 181.50 171.00 194.50 194.50 228.00 200.50 221.00 206.00 299.50
1¼ 170.00 214.00 170.00 214.00 176.50 399.50 203.00 291.50 208.50 2289.00 217.00 349.50
1½ 200.50 218.00 200.50* 218.00* 218.00 246.00 256.00 295.00 275.00 3027.00 295.00 353.00
2 200.50 218.00 200.50* 218.00* 218.00 246.00 257.50 295.00 276.50 3039.00 295.00 353.00
2½ 205.00 228.00 234.00* 228.00* 232.50 259.50 281.50 312.50 361.50 357.50 340.00 378.00
3 230.00 325.00 230.00* 325.00* 473.00 410.50 324.00 515.50 360.50 3959.50 398.50 685.50
4 291.50 441.50 291.50 311.00 291.50* 441.50* 353.00 543.00 398.50 438.00 441.50 739.50
6 400.50 473.00 400.50 427.50 400.50* 473.00* 478.00 573.00 573.00 631.00 650.00 794.00
8 – – 624.50 665.50 624.50* 715.00* 759.00 877.00 912.00 10037.50 1044.50 1223.50
10 – – 825.00 1053.00 825.00 1049.00 825.00* 1049.00 985.50 10828.00 1122.00 1455.50
12 – – 1053.00 1122.00 1053.00 1558.50 1053.00 1558.50 1266.00 1393.00 1455.50 2210.50

No. 450H SS Concentric Reducer
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each
2 x 1 2.1 $1106.00 +
1¼ 2.4 + +
No. 450H SS
1½ 2.5 1106.00 $1382.00
2½ x 1 3.2 + +
1½ 3.4 + +
2 4.0 1383.50 1729.00
3 x 1½ 3.6 + +
2 4.8 1503.50 1879.50
2½ 5.5 1503.50 1879.50
4 x 2 6.8 + +
2½ 7.5 2202.00 2751.50
3 8.6 1523.50 1903.00
6 x 3 15.0 2202.00 2751.50
4 16.0 2827.50 3535.00
8 x 4 24.0 3555.00 +
6 26.0 4218.00 5273.00
10 x 6 40.0 + 7782.50
8 43.0 7100.50 8877.00
12 x 8 52.5 10283.50 12854.50
10 57.0 10888.00 +

No. 451H SS Eccentric Reducer
Eccentric Reducer ECCENTRIC REDUCER
Nominal Approx.
Refer to publication 17.16 Size Weight Each Price Each
2 x 1 2.1 + +
1¼ 2.4 + +
No. 451H SS
1½ 2.5 $3184.00 +
2½ x 1½ 3.6 + +
2 4.0 5358.00 +
3 x 1½ 3.6 + +
2 4.8 5228.00 $6534.50
2½ 5.5 5410.00 6762.00
4 x 2 6.8 + +
2½ 7.5 7405.00 +
3 8.6 9412.00 +
6 x 3 15.0 10417.00 13021.00
4 16.0 10778.00 13474.00
8 x 4 24.0 14902.00 21894.00
6 26.0 18164.50 22705.50
10 x 6 40.0 17096.50 +
8 43.0 18390.50 +
12 x 8 52.5 19690.00 24612.00
10 57.0 21011.50 +
No. 460H SS Cap
Cap CAP
Approx.
NO. 460H SS Nominal Weight Thickness
Size Each “T” Price Each
Inches lb Inches Type 304L Type 316L
¾ 0.2 0.91 $271.50 $314.50
1 0.3 0.91 271.50 314.50
1¼ 0.6 0.94 291.00 332.50
1½ 0.7 0.94 301.50 346.00
No. 460H SS
2 1.2 0.94 413.50 475.00
2½ 1.7 0.97 431.00 493.50
3 2.6 0.97 771.00 +
4 4.6 1.03 988.00 +
6 10.1 1.03 1177.50 +
8 21.8 6.25 * 2774.50 +
10 34 7.25 * 3815.00 +
12 47.9 8.50 * 4810.50 +
* 8 – 12” No. 460H SS sizes are dish caps. End-to-end dimensions are shown instead of thickness.

Products for IPS Stainless Steel Pipe
Stainless Steel Valves
Series 461 Vic-300 MasterSeal™ Stainless Steel Butterfly Valve
Stainless Steel Valves for Grooved IPS SS Pipe

Stainless Steel Butterfly Valve
SERIES 461
2” 2½” 3” 4” 6” 8” 10” 12”

(020) (024) (030) (040) (060) (080) (100) (120)
BARE VALVE
EPDM (E) or Nitrile (T) Seat
$1164.00 $1516.50 $1601.50 $1987.00 $4012.00 $5340.50 $10814.00 $12218.50
V - XXX - 461 - X - E - 0
Fluoroelastomer (CHP) Seat
1397.00 1878.00 1921.50 2384.50 4814.50 6408.50 12976.50 14661.50
V - XXX - 461 - X - O - 0
10-POSITION OPERATOR – ZINC PLATED
EPDM (E) or Nitrile (T) Seat 10-Position Handle
with Memory Stop $1538.50 $1895.50 $1978.50 $2362.00 $4442.00 $5775.00 – –
V - XXX - 461 - X - E - 2
Fluoroelastomer (CHP) Seat 10-Position
Handle with Memory Stop 1846.00 2274.50 2374.00 2834.00 5331.00 6930.00 – –
V - XXX - 461 - X - O - 2
EPDM (E) or Nitrile (T) Seat 10-Position –
1771.50 2128.00 2209.00 2596.00 4674.00 6005.00 – –
Tamper Proof
10-POSITION OPERATOR - STAINLESS STEEL
EPDM (E) or Nitrile (T) Seat 10-Position Handle
$1846.50 $2274.50 $2374.00 $2832.50 $5330.00 $6930.00 – –
with Memory Stop
Fluoroelastomer (CHP) Seat 10-Position
+ + + + + + + +
Handle with Memory Stop
GEAR OPERATOR - ALUMINUM
EPDM (E) or Nitrile (T) Seat Gear Operator
$2810.50 $3165.00 $3246.00 $3633.00 $5657.50 $6992.50 $12871.50 $14563.00
V - XXX - 461 - X - E - 3
EPDM (E) or Nitrile (T) Seat Gear Operator with
3149.00 3504.50 3585.00 3971.00 6082.50 7412.50 13644.50 15799.50
Memory Stop
Fluoroelastomer (CHP) Seat Gear Operator
3372.00 3797.50 3895.00 4359.50 6788.50 8390.50 15446.00 17475.50
V - XXX - 461 - X - O - 3
Chain Wheel 4059.50 4414.00 4496.50 4882.00 6905.50 8238.00 15164.50 17134.00
V - XXX - 461 - X - E - 6
4396.00 4752.00 4834.00 5216.50 7326.50 8661.00 15946.00 18018.00
Memory Stop and Chain Wheel
Gear Operator with AWWA 2” Square Operator
+ + + + + + + +
Nut

N/A - Not available.

V - 030 461
- X E- 0
Actual OD Size
Type in/mm Code Series Disc/Stem Seat Operator
V 2.375/60.3 020 461 X - 316SS/17-4PH E - EPDM 0- Bare
2.875/73.0 024 E461 (461 only) T - Nitrile 2- 10-position handle with memory stop
3.000/76.1 761 E - 316SS/17-4PH O - Fluoroelastomer 3- Gear operator
3.500/88.9 030 (E461 only) 4- Lever lock with tamper-resistant device
4.500/114.3 040 (8"/200 mm)
5.500/139.7 139 5 - Gear operator with memory stop
6.500/165.1 165 6 - Gear operator with chain wheel
6.625/168.3 060 7 - Gear operator with memory stop and
8.500/216.3 216 chain wheel
8.625/219.1 080 8 - Gear operator with AWWA 2" square oper. nut
10.500/267.4 267 S - Bare valve with ISO 5211 diagonal square
10.750/273.0 100 head drive
12.500/318.5 318 X - Stainless steel 10-postion handle with
memory stop
12.750/323.9 120

Series 861 Vic-300 MasterSeal™ Stainless Steel Butterfly Valve for Potable Water Applications
Stainless Steel Butterfly Valve
for Potable Water Applications
SERIES 861
2” 2½” 3” 4” 6” 8” 10” 12”

(020) (024) (030) (040) (060) (080) (100) (120)
BARE VALVE
Fluoroelastomer Seat
$1164.00 $1516.50 $1601.50 $1987.00 $4012.00 $5340.50 $10814.00 $12218.50
V - 0XX - 861 - X - P - 0
10-POSITION OPERATOR – ZINC PLATED
Fluoroelastomer Seat 10-Position Handle
with Memory Stop $1538.50 $1895.50 $1978.50 $2362.00 $4442.00 $5775.00 – –
V - 0XX - 861 - X - P - 2
Fluoroelastomer Seat 10-Position – Tamper Proof 1771.50 2128.00 2209.00 2596.00 4674.00 6005.00 – –
10-POSITION OPERATOR - STAINLESS STEEL
Fluoroelastomer Seat 10-Position Handle
$1846.50 $2274.50 $2374.00 $2832.50 $5330.00 $6930.00 – –
with Memory Stop
GEAR OPERATOR - ALUMINUM
Fluoroelastomer Seat Gear Operator
$2810.50 $3165.00 $3246.00 $3633.00 $5657.50 $6992.50 $12871.50 $14563.00
V - 0XX - 861 - X - P - 3
3149.00 3504.50 3585.00 3971.00 6082.50 7412.50 13644.50 15799.50
with Memory Stop
Fluoroelastomer Seat Gear Operator with
4059.50 4414.00 4496.50 4882.00 6905.50 8238.00 15164.50 15164.50
Chain Wheel V - 0XX - 861 - X - P - 6
4396.00 4752.00 4834.00 5216.50 7326.50 8661.00 15946.00 18018.00
with Memory Stop and Chain Wheel

Series 726-S Ball Valve
Grooved End Ball SERIES 726-S WITH STAINLESS STEEL BODY AND TRIM
Valve Complete
Valve With Valve Complete
Tamper Resistant With
SERIES 726-S Nominal Size Approx. Weight Each Lock/Seal Option Gear Operator *
Refer to publication 17.22 inches lb 1226-16 1226-20
1¼ 3.4 + –
1½ 4.7 $1247.50 $2372.00
2 7.5 1468.50 2875.50
2½ 11.5 2544.50 3874.50
3 17.3 3419.00 4675.00
8226-16 8226-20
4 44.0 $5435.00 $6930.00
Lever Handle
6 82.0 13048.00 14004.50
Series 726-S valves are available with electric, pneumatic, and hydraulic actuators or chainwheels. Contact Victaulic for details.
* Valve with gear operator requires additonal lead time. Contact Victaulic for details.
B - 020 - 1 2 2 6 - 16
Actual OD Size Pressure

Type In./mm Code Rating Body Ball & Stem Seat Operator
B 1.660/42.4 012 1 - 1,000 psi2 2 - 316 Stainless Steel 2 - 316 Stainless Steel 6 - Reinforced Teflon 00 - Bare
1.900/48.3 014 8 - 800 psi3 16 - 2-Position Handle with Tamper-
2.375/60.3 020 9 - Special1 9 - Special1 9 - Special1 proof Locking Device
2.875/73.0 024 20 - Gear Operator
3.000/76.1 761 21 - Gear Operator with Memory
3.500/88.9 030 22 - Gear Operator with Chain Wheel
4.500/114.3 040 23 - Gear Operator with AWWA
6.500/165.1 060 Square Nut
6.625/168.3 165 29 - Non-standard Gear Operator1
NOTES:
(1) Details required.
(2) For sizes 1¼ - 3"
(3) For sizes 4 - 6"
* For ductile iron Series 726, request publication 08.23.
Series 712-S Check Valve
Check Valve Series 712-S swing check valve is available with Grade “E”, “T” or Fluoroelastomer seat, bumper and
bonnet closure gasket. Specify choice on order. Contact Victaulic for details.
SERIES 712-S Swing check valves are supplied with bonnet cap drilled and tapped with ⅛” NPT pipe plug for chemical
Refer to publication 17.08 injection or other auxiliary connections.
SERIES 712-S – WITH 316 STAINLESS STEEL BODY
Approx.
Size Weight Each Price Each
Valve Complete
Valve Complete with Grade “O”
with Grade “E” or “T” Fluoroelastomer
inches lb Seat & Bonnet Gasket Seat & Bonnet Gasket
2 12.0 $4770.50 $6417.50

Series 416 Stainless Steel Check Valve
Stainless Steel Check SERIES 416 – STAINLESS STEEL CHECK VALVE
Approx.
Valve Nominal Size Weight Each Price Each
inches lb “E” or “T” Seat
SERIES 416
2 3.8 $1730.50
2½ 4.6 1805.00
3 6.2 2130.00
4 21.0 2251.00
6 42.0 4432.50
8 85.0 6055.00
10 130.0 +
12 206.0 19198.00
For Series 416 sizes 2 – 12” – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come
standard untapped.
For 2 – 3” sizes – One ½” NPT drain hole on the downstream side of the seat is available as an option.
For 4 – 12” sizes – Two ½” NPT drain holes or one hole on each side of the seat are also available as options.
2 – 3” + Quoted on application. Contact Victaulic for pricing and availability.
4 – 12”
Series 816 Stainless Steel Check Valve for Potable Water Applications
Stainless Steel Check SERIES 816 – STAINLESS STEEL CHECK VALVE FOR POTABLE WATER APPLICATIONS
Approx.
Valve for Potable Nominal Size Weight Each Price Each
Water Applications inches lb Fluoroelastomer Seat
2 3.8 $1730.50
SERIES 816 2½ 4.6 1805.00
4 20.1 2251.00
6 42.0 4432.50
8 85.0 6055.00
10 130.0 16203.50
12 206.0 19198.00
For sizes 2 – 12” – Drilling, tapping and plugs are available. Contact Victaulic for pricing and delivery. Valves come standard
untapped.
For 2 – 3” sizes – One ½” NPT drain hole on the downstream side of the seat is available as an option.
For 4 – 12” sizes – Two ½” NPT drain holes or one hole on each side of the seat are available as options.
2 – 3”
4 – 12”

SECTION 15 - Steam, Condensate and Chemical System Products
Steam, Condensate
and Chemical
System Products

Steam, Condensate and Chemical System Products

Rigid Coupling STYLE 870 – PTFE SEAL
COUPLING
STYLE 870 COMPLETE
With PTFE Seal
Refer to publication 100.02 PIPE Approx. Wgt. Ea. Assembly SPARE PARTS
inches
Nom. Outside PTFE Seal
Size Dia. lb Price Each Assembly
2 2.375 8.4 $585.00 $344.50 NR
2½ 2.875 9.5 705.50 407.00 NR
3 3.500 10.6 740.50 453.50 NR
4 4.500 16.1 865.00 526.50 NR
6 6.625 25.6 1161.50 712.00 NR
8 8.625 43.2 1533.50 895.50 NR
NR
Non-returnable
Series 871 Gate Valve
Gate Valve SERIES 871 GATE VALVE
Approx.
SERIES 871 Size Weight Each
2 30.0 $1355.00
2½ 46.0 1890.50
3 50.5 2133.00
4 73.0 2921.00
6 148.0 4416.50
8 264.0 6174.50
Series 871R Modular Gate Valve
Modular Gate Valve SERIES 871R MODULAR GATE VALVE
Nominal Sch. 40 OGS-200 Grooved Ends Sch. 80 OGS-200 Grooved Ends

NO. 871R Approx. Approx.
2 44.9 $3188.00 46.2 $3236.00
2½ 64.6 3951.00 66.2 3964.00
3 78.7 4188.00 81.6 4234.00
4 110.8 5374.50 114.9 5422.50
6 195.8 8085.00 207.0 8172.50
8 304.2 10641.00 320.8 10800.00

Series 159 Flexible Loop
Flexible Loop SERIES 159 FLEXIBLE LOOP
Approx.
SERIES 159 Size Weight Each
2 18.0 $4700.50
2½ 29.0 5190.50
3 43.0 6567.50
4 60.0 8201.50
6 150.0 15447.50
8 286.0 24356.00
Carbon Steel OGS-200 Grooved End Fittings

No. 890C and 890HC – Long Radius 90° Elbow, No. 811C and 811HC – 45° Elbow
Carbon Steel Elbows LONG RADIUS 90° ELBOW OR 45° ELBOW – CAST CARBON STEEL
Nom.
Refer to publication 100.01 Size Long Radius 90° Elbow 45° Elbow
No. 890C No. 890HC No. 811C No. 811HC
Sch. 40 Sch. 80 Sch. 40 Sch. 80
2 4.0 $183.50 4.4 $197.50 2.7 $144.50 3.1 $153.50
2½ 6.2 261.00 6.6 283.00 4.0 191.00 4.4 205.50
3 8.6 373.00 10.1 428.00 5.7 262.50 6.8 302.50
No. 890C and No. 890HC 4 16.1 685.50 18.5 759.50 10.1 459.00 11.2 513.50
6 37.7 1703.50 47.0 1972.00 22.3 1093.50 28.0 1301.00
8 72.1 3061.00 92.8 3891.00 42.8 2054.50 55.3 2432.50
No. 811C and No. 811HC
No. 820C and No. 820HC Tee
Carbon Steel Tee STANDARD TEE – CAST CARBON STEEL
No. 820C No. 820HC

Refer to publication 100.01 Nominal Sch. 40 Sch. 80
Approx. Approx.
Wgt. Ea. Wgt. Ea.
2 6.1 $294.00 6.6 $313.50
2½ 9.5 443.50 10.8 464.50
3 14.1 619.50 16.5 694.00
No. 820C and No. 820HC 4 26.2 1111.00 30.4 1233.00
6 61.3 2644.00 76.1 3247.00
8 124.5 4978.50 155.4 5943.00

No. 825C and No. 825HC Reducing Tee
Carbon Steel REDUCING TEE – CAST CARBON STEEL
No. 825C No. 825HC

Reducing Tee Nom. Size Sch. 40 Sch. 80
Refer to publication 100.01 inches Approx. Approx.
Wgt. Each Wgt. Each
Run x Branch lb Price Each lb Price Each
2½ x 2½ x 2 6.0 $342.00 6.5 $354.50
3 x 3 x 2 8.2 461.50 9.4 509.50
2½ 8.5 487.00 9.8 523.50
4 x 4 x 2 13.2 813.00 15.0 858.50
No. 825C and No. 825HC
2½ 13.5 813.50 15.4 838.50
3 13.8 834.00 16.0 894.50
6 x 6 x 2½ 27.5 1485.00 31.0 1646.00
3 27.8 1508.50 34.0 1688.50
4 28.5 1573.50 35.0 1705.50
8 x 8 x 4 47.0 2503.50 60.0 2733.00
6 48.5 2516.00 62.0 2771.00
No. 850C and No. 850HC Concentric Reducer
Carbon Steel CONCENTRIC REDUCER – CAST CARBON STEEL
No. 850C No. 850HC

Concentric Reducer Nom. Size Sch. 40 Sch. 80
Wgt. Each Wgt. Each
2½ x 2 2.4 $144.00 2.6 $154.50
3 x 2 2.9 172.50 3.3 187.00
2½ 3.1 180.00 3.6 198.00
4 x 2 4.0 255.50 4.6 273.50
No. 850C and No. 850HC 2½ 5.1 255.50 4.8 278.50
3 5.5 267.50 5.7 283.00
6 x 2½ 12.2 354.50 13.2 328.50
3 12.9 368.00 13.9 443.00
4 7.7 398.50 9.2 473.00
8 x 4 20.4 584.00 5.5 721.50
6 13.4 708.50 17.5 786.00

No. 851C and No. 851HC Eccentric Reducer
Carbon Steel Eccentric ECCENTRIC REDUCER – CAST CARBON STEEL
No. 851C No. 851HC

Reducer Nom. Size Sch. 40 Sch. 80
Wgt. Each Wgt. Each
2½ x 2 2.4 $181.00 2.5 $186.50
3 x 2 2.8 197.00 3.2 210.00
2½ 3.0 204.50 3.5 219.00
4 x 2 4.0 242.00 4.8 268.50
2½ 4.0 247.50 4.9 273.50
3 4.2 253.00 4.9 276.00
No. 851C and No. 851HC 6 x 2½ 12.2 439.50 13.7 497.50
3 12.9 447.50 14.4 510.00
4 10.0 530.00 11.8 599.00
8 x 4 20.5 723.00 26.0 783.50
6 15.8 850.00 20.3 995.00
No. 860C and No. 860HC Cap
Carbon Steel Cap CAP – CAST CARBON STEEL
No. 860C No. 860HC

Refer to publication 100.01 Nominal Sch. 40 Sch. 80
Approx. Approx.
Wgt. Ea. Wgt. Ea.
2 1.3 $73.50 1.5 $77.50
2½ 2.0 99.50 2.2 105.00
No. 860C and No. 860HC 3 2.6 132.00 3.1 144.50
4 4.4 213.50 5.1 234.50
6 9.3 450.00 11.5 520.50
8 16.8 762.50 21.4 931.00
No. 860T Carbon Steel Tapped Cap
Carbon Steel TAPPED CAP – CAST CARBON STEEL
Approx.
Tapped Cap Nominal Wgt. Ea.
NO. 860T
2 1.3 $99.00
2½ 2.0 124.00
3 2.6 159.50
4 4.4 227.50
6 9.3 400.50
8 16.8 683.50

No(s). 845FC and No. 846FS Flat Face ANSI Class 150 Flange Adapter Nipples, No(s). 845RC and 846RC Raised Face ANSI Class 300 Flange Adapter Nipples
Carbon Steel Flange FLANGE ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300 – CAST CARBON STEEL
Nom.
Adapter Nipples Size ANSI Class 150 Flange Adapter Nipple ANSI Class 300 Flange Adapter Nipple
Refer to publication 100.01 No. 845RC Raised No. 846RC Raised
No. 845FC Flat Face Face No. 846FC Flat Face Face
2 6.6 $318.50 6.8 $328.00 8.2 $401.50 8.4 $422.50
2½ 9.7 518.50 9.5 485.00 11.7 573.50 11.9 590.50
3 11.7 553.00 12.1 597.50 15.9 737.50 16.1 777.50
4 18.7 938.00 19.2 965.50 28.7 1397.00 28.7 1319.00
No. 845FC and No. 845RC 6 30.9 1319.50 28 1521.50 49.6 2289.00 47.8 2353.50
8 42.3 2157.00 48.5 2295.00 73.9 3344.00 72.3 3411.50
No. 846FC and No. 846RC
No. 843 Grooved Adapter Nipple
Grooved Adapter NO. 843 GROOVED ADAPTER NIPPLE
Approx.
Nipple Size x Length Wgt. Ea.
inches Part Code lb Price Each
2 x 6 FB85843U00 1.9 $84.50

No. 895i OGS-200 Groove x OGS-200 Groove x NPT Thread Instrumentation Nipple
OGS-200 Groove x OGS-200 GROOVE X OGS-200 GROOVE X NPT THREAD INSTRUMENTATION NIPPLE - SCH. 40 CARBON STEEL
Nominal No. 895i

OGS-200 Groove x Approx.
NPT Thread Wgt. Ea.
Instrumentation Nipple inches lb Price Each
¾ 5.8 $1006.00
NO. 895I 1 5.8 1022.00
2 x
Refer to publication 100.01 1¼ 5.8 1061.00
1½ 5.8 1061.50
¾ 9.1 1062.00
1 9.1 1078.50
2½ x
1¼ 9.1 1116.50
1½ 9.1 1117.00
¾ 11.7 1092.00
1 11.7 1108.00
3 x
1¼ 11.7 1146.50
1½ 11.7 1147.00
¾ 16.5 1150.50
1 16.5 1167.00
4 x
1¼ 16.5 1206.00
1½ 16.5 1206.00
¾ 19.5 1346.00
1 19.5 1291.00
6 x
1¼ 19.5 1307.00
1½ 19.5 1345.50
¾ 29.0 1594.50
1 29.0 1553.50
8 x
1¼ 29.0 1594.00
1½ 29.0 1535.50
Stainless Steel OGS-200 Grooved End Fittings

No. 890S – Long Radius 90° Elbow, No. 811S – 45° Elbow
Stainless Steel Elbows ELBOWS – LONG RADIUS 90° ELBOW OR 45° ELBOW – SCH. 40S TYPE 316 STAINLESS STEEL
Nom. Size Long Radius 90° Elbow 45° Elbow

No. 890S No. 811S
Approx. Approx.
Wgt. Ea. Price Wgt. Ea. Price
inches lb Each lb Each
2 4.0 $250.50 2.7 $193.00
2½ 6.2 356.50 4.0 257.00
3 8.6 498.50 5.7 354.50
4 16.1 938.50 10.1 616.00
6 37.7 2433.00 22.3 1554.50
No. 890S
8 72.1 4459.00 42.8 2723.50
No. 811S

No. 820S Tee
Stainless Steel Tee STANDARD TEE – SCH. 40S TYPE 316 STAINLESS STEEL
Nominal Tee
No. 820S
Approx. Wgt. Ea.
2 6.1 $384.50
2½ 9.5 599.00
3 14.1 858.50
4 26.2 1531.50
No. 820S
6 61.3 3832.00
8 124.5 7274.50
No. 825S Reducing Tee
Stainless Steel REDUCING TEE – SCH. 40S TYPE 316 STAINLESS STEEL
Nominal Reducing Tee

Reducing Tee inches No. 825S
Refer to publication 100.01 Approx. Wgt. Ea.
Run x Branch lb Price Each
2½ x 2½ x 2 6.0 $475.00
3 x 3 x 2 8.2 636.50
2½ 8.5 669.50
4 x 4 x 2 13.2 1103.50
No. 825S 2½ 13.5 1105.50
3 13.8 1138.00
6 x 6 x 2½ 27.5 1688.00
3 27.8 2152.50
4 28.5 2223.50
8 x 8 x 4 47.0 3511.50
6 48.5 3554.50
No. 850S Concentric Reducer, No. 851S Eccentric Reducer
Stainless Steel REDUCERS
Nom. Size Concentric Reducer Eccentric Reducer

Reducers No. 850S No. 851S
Refer to publication 100.01 Approx. Wgt. Each Approx. Wgt. Each
2½ x 2 2.4 $157.00 2.4 $211.50
3 x 2 2.9 186.00 2.8 233.50
2½ 3.1 193.00 3.0 246.00
4 x 2 4.0 261.50 4.0 297.50
2½ 5.1 269.00 4.0 301.50
No. 850S 3 5.5 290.50 4.2 314.50
6 x 2 12.2 456.00 12.2 529.50
2½ 12.9 445.00 12.9 540.50
3 7.7 549.50 10.0 665.50
8 x 4 20.4 742.00 20.5 540.50
6 13.4 816.00 15.8 1080.50
No. 851S

No. 860S Cap
Stainless Steel Cap CAP – SCH. 40S TYPE 316 STAINLESS STEEL
Nominal Cap
No. 860S
Approx.
Wgt. Ea.
2 1.3 $99.00
2½ 2.0 135.00
No. 860S 3 2.6 163.00
4 4.4 294.00
6 9.3 638.50
8 16.8 1093.00
No. 845FS – ANSI Class 150 Flat Face Flange Adapter Nipple, No. 845RS – ANSI Class 150 Raised Face Flange Adapter Nipple, No. 846FS – ANSI Class 300 Flat Face Flange Adapter Nipple, No. 846RS – ANSI Class 300 Raised Face Flange Adapter Nipple
Stainless Steel Flange FLANGE ADAPTER NIPPLES – ANSI CLASS 150 AND CLASS 300 – SCH. 40S TYPE 316 STAINLESS STEEL
Nom.
Adapter Nipples Size ANSI Class 150 Flange Adapter Nipple ANSI Class 300 Flange Adapter Nipple
Refer to publication 100.01 No. 845RS Raised No. 846RS Raised
No. 845FS Flat Face Face No. 846FS Flat Face Face
2 6.6 $324.00 6.8 $337.50 8.2 $417.00 8.4 $422.50
2½ 9.7 465.50 9.5 477.00 11.7 597.50 11.9 604.50
3 11.7 554.00 12.1 577.50 15.9 770.00 16.1 779.00
4 18.7 931.50 19.2 961.00 28.7 1330.50 28.7 1348.00
No. 845FS 6 30.9 1419.00 28.0 1470.50 49.6 2375.00 47.8 2402.50
8 42.3 2219.50 48.5 2248.00 73.9 3476.50 72.3 3503.50
No. 845RS

No. 826 Steam Outlet Fitting
Steam Outlet Fitting

NO. 826
Refer to publication 100.16 for order details.
NO. 826 STEAM OUTLET FITTING – CARBON STEEL, STANDARD WEIGHT, UNPAINTED
Pipe Nominal Size Outlet Size Pipe Length Number of Outlets

D d L 1–3 4–6
inches ft Price Each
2–4 + +
>4–8 + +
2 ¾–2 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
2½ ¾ – 2½ > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
3 ¾–3 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
4 ¾–4 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
6 ¾–6 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
2–4 + +
>4–8 + +
8 2–8 > 8 – 12 + +
> 12 – 16 + +
> 16 – 21 + +
Contact Victaulic for other pipe materials, finishes, or sizes.

NOTE: The No. 826 Steam Outlet Fitting is available with an optional Style 870 Rigid Coupling and No. 860 Cap. Refer to Section 15 – Steam, Condensate and Chemical System
Products for coupling and cap pricing. Coupling and cap will be sized as per the connection size as indicated on the No. 826 Steam Outlet Fitting.
Please see publication 100.16 for additional dimensions that will be required at time of order.

Nos. 891C, 891H, 892C and 892H Steam and Condensate In-Line Drip Leg Fittings
Steam and IN-LINE DRIP LEG FITTINGS - NOS. 891C, 891H, 892C AND 892H
Nominal No. 891C (Sch. 40) No. 891H (Sch. 80) No. 892C (Sch. 40) No. 892H (Sch. 80)
Condensate In-Line Approx. Approx. Approx. Approx.
Drip Leg Fittings Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
Refer to publication 100.14 inches lb Each lb Each lb Each lb Each
2 30.6 $4549.50 31.1 $4617.50 37.4 $4641.50 41.9 $4757.50
2½ 39.4 5049.50 41.4 5087.50 50.2 5161.00 55.6 5222.00
3 47.8 5200.50 50.4 5279.00 62.9 5330.50 70.7 5500.00
4 74.5 6445.50 82.4 6616.00 80.5 6606.50 90.8 6826.50
6 79.5 6966.00 90.8 7144.00 99.5 7135.00 118.8 7191.00
8 98.0 7864.50 115.8 7848.00 118.0 8033.00 143.8 8065.50
Nos. 893C, 893H, 894C and 894H Steam and Condensate Riser Drip Leg Fittings
Steam and RISER DRIP LEG FITTINGS - NOS. 893C, 893H, 894C AND 894H
Nominal No. 893C (Sch. 40) No. 893H (Sch. 80) No. 894C (Sch. 40) No. 894H (Sch. 80)
Condensate Riser Drip Approx. Approx. Approx. Approx.
Leg Fittings Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price Wgt. Ea. Price
Refer to publication 100.15 inches lb Each lb Each lb Each lb Each
2 30.6 $4028.00 32.6 $4095.00 37.4 $4120.00 41.9 $4235.00
2½ 39.4 4527.00 41.4 4564.00 50.2 4639.50 55.6 4698.50
3 47.8 4677.50 50.4 4757.50 62.9 4807.50 70.7 4978.50
4 74.5 5758.00 82.4 5926.50 80.5 5919.50 90.8 6138.00
6 142.9 7612.50 162.9 9075.00 153.6 7946.00 177.9 9267.50
8 236.4 11256.00 276.1 11694.50 243.1 11305.00 285.5 11761.50

RG1200 OGS-200 Roll Grooving Tool
RG1200 RG1200 is designed for manual grooving of 2 – 6” | DN50 – DN150 Schedule 40 carbon steel and 2 – 3” |
DN50 – DN80 Schedule 80 carbon steel pipe to OGS-200 roll groove specifications. The tool is supplied
complete with 2-6” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel handle; and (10)
shear pins.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price
RG1200 – OGS-200 Groove Profile R0201200CR 47.0 $496.00 $2987.50
For tool rating capacity please reference publication 24.11.
For OGS-200 roll groove specifications, please reference publication 25.12.
RG1200 PARTS
Part
Description Number Quantity Price Each
2 – 3” Upper Roll R9S2120U03 1 $84.50
4 – 6” Upper Roll R9S4120U06 1 84.50
2 – 3” Lower Roll R9S2120L03 1 171.00
4 – 6” Lower Roll R9S4120L06 1 171.00
OGS-200 2” Groove Confirmation Gauge R020120GGE 1 31.50
Confirmation 2½ – 3” Groove Confirmation Gauge R024120GGE 1 31.50
Gauges 4 – 6” Groove Confirmation Gauge R040120GGE 1 31.50
Adjustable Ratchet with Swivel Handle R000120RCH 1 325.00
Gear (12x26 Teeth) R0001200GR 1 124.50
Shear Pin Punch R000120PNH 1 39.50
Shear Pin R000120PIN 10 17.00
RG1210 OGS-200 Roll Grooving Tool
complete with 2 – 8” roll sets; Groove confirmation gauges; Adjustable ratchet with swivel handle; and
(10) shear pins.
Tool Weight/
Shipping
Weight Rental Tool
RG1210 – OGS-200 Groove Profile R0201210CR 95/153 $1200.00 $7229.00
RG1210 PARTS
Part
2 – 3” Upper Roll Assembly R9S2121U03 1 $256.00
4 – 6” Upper Roll Assembly R9S4121U06 1 248.00
8” Upper Roll Assembly R9S8121U08 1 256.00
2 – 3” Lower Roll Assembly R9S2121L03 1 423.00
8” Lower Roll Assembly R9S8121L08 1 445.00
2” Groove Confirmation Gauge R020120GGE 1 31.50
2½ – 3” Groove Confirmation Gauge R024120GGE 1 31.50
4 – 6” Groove Confirmation Gauge R040120GGE 1 31.50
Ratchet Assembly R000121RTA 1 330.50

OGS-200 Carbon Steel Grooving Rolls
OGS-200 Carbon Steel OGS-200 CARBON STEEL GROOVING ROLLS
Pipe Size Purchase

Grooving Rolls Range List Price
Tool inches | [mm] Part Number Each Set
2 – 3/60.3 – 88.9 R9S2268003 $2565.50
VE272 Family
4 – 6/114.3 – 168.3 R9S4268006 2742.50
VE416 4 – 6/114.3 – 168.3 R9S4416006 2131.00
VE460 8/219.1 R9QS460008 6713.50
OGS-200 Stainless Steel Grooving Rolls
OGS-200 Stainless OGS-200 STAINLESS STEEL GROOVING ROLLS
Pipe Size Purchase

Steel Grooving Rolls Range List Price
Tool inches | [mm] Part Number Each Set
2 – 3/60.3 – 88.9 RXS2268003 $3497.50
VE272 Family
4 – 6/114.3 – 168.3 RXS4268006 3752.00
VE416 4 – 6/114.3 – 168.3 RXS4416006 2994.50
VE460 8/219.1 RXS8460008 12415.50
Go/No Go Groove Tape
Go/No Go Groove GO/NO GO GROOVE TAPE
Description Part Number Price Each

Tape Go/No Go Groove Tape RW75100MCH $125.00

SECTION 16 - Large Diameter AGS Vic-Ring Products
Large Diameter
AGS Vic-Ring
Products

Large Diameter Piping Products

Bolted Split-Sleeve For pricing on Victaulic Bolted Split-Sleeve Couplings, refer to PL2022-A-VBSP.
Couplings
Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings

Vic-Ring Check Sheet

for W07/W77/W89 AGS Couplings
Send US, Asia, and Europe inquiries to: ep@victaulic.com or fax to: 610-923-3010
To speak with a Customer Service representative in the US, please call 1-800-PICK-VIC
In Canada, please e-mail viccanada@victaulic.com or fax 905-884-7446
The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping System expert who is experienced
in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic Company’s Vic-Ring submittals available at www.victaulic.com.
TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW:
DISTRIBUTOR INFORMATION:
DISTRIBUTOR: DISTRIBUTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
CONTRACTOR INFORMATION:
CONTRACTOR: CONTRACTOR CONTACT NAME:
COMPANY: PHONE:
ADDRESS: FAX:
CITY, STATE, ZIP: E-MAIL:
PROJECT INFORMATION:
PROJECT NAME: QUOTE NEEDED BY (date):
CITY & STATE: BID DATE:
PROJECT SPEC. INCLUDED REQUESTED SHIPPING DATE:
ENGINEERING FIRM: CONTACT NAME:
CITY & STATE: PHONE:
APPLICATION DATA:
NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS:
CARBON STEEL: GRADE - SCHEDULE - CLASS-
STAINLESS STEEL: TYPE - SCHEDULE -
DUCTILE IRON: PRESSURE - CLASS -
SYSTEM WORKING PRESSURE (PSI): TEST/PROOF PRESSURE (PSI): TEMPERATURE (DEG. F):
MEDIA/SERVICE:
CONFIGURATION INFORMATION:
COUPLING: STYLE - DISTRIBUTOR CONTACT NAME:
RINGS: SIZE (=PIPE O.D.) - QTY: (PER JOINT - PIPE TO PIPE CONNECTIONS REQUIRE TWO RINGS)
LINING OPTIONS:
UNLINED ABRASION
FLUSH OVERHUNG RUBBER LINED - FLUSH RUBBER LINED - OVERHUNG
ABRASION AND CORROSION

RUBBER LINED WITH RUBBER LINED WITH
PROTECTIVE BUMPER - FLUSH PROTECTIVE BUMPER - OVERHUNG
RUBBER LINED - FLUSH RUBBER LINED - OVERHUNG
CHROMIUM CARBIDE OVERLAY (CCO)
6287 Rev B Updated 06/2016 © 2016 Victaulic Company. All rights reserved. 1
victaulic.com

Style W07 AGS Rigid Coupling for AGS Vic-Ring System
Vic-Ring Couplings and Adapter Rings

Rigid Coupling AGS STYLE W07 – FOR AGS VIC-RING SYSTEM
COUPLING
For AGS Vic-Ring COUPLING COMPLETE †
System Approx.
With Flush-Seal Silicone Grade “L”
Size Wgt. Ea “E” or “T” Gasket Gasket SPARE PARTS
AGS STYLE W07
AGS
Refer to publication 16.11 inches Price Each Price Each Vic-Ring Plated Bolt & Nut
Nominal Coupling Price Size §
Pipe Size lb Painted Galv. Painted Galv. Each No. inches
12 14.000 49.0 $1456.00 $1793.00 $2990.50 $3327.50 + 2 1 x 5½
14 16.000 61.0 1554.50 1983.00 3291.00 3719.00 + 2 1 x 5½
16 18.000 71.0 1794.50 2324.50 3619.00 4147.00 + 2 1 x 5½
18 20.000 82.0 2452.00 3073.00 4193.50 4813.00 + 2 1⅛ x 5½
20 22.000 99.0 2842.50 3783.00 + + + 2 1⅛ x 5½
14 – 24” 22 24.000 116.0 3143.50 3981.50 4567.50 5404.50 + 2 1⅛ x 5½
24 26.000 205.0 5041.00 + + + + 4 1⅜ x 6
26 28.000 220.0 6006.00 + + + + 4 1⅜ x 6
28 30.000 227.0 8416.00 + + + + 4 1¼ x 7
30 32.000 242.0 9194.50 + + + + 4 1¼ x 7
32 34.000 255.0 + + + + + 4 1¼ x 7
34 36.000 268.0 9916.00 + + + + 4 1¼ x 7
36 38.000 298.0 11395.00 14155.00 + + + 4 1½ x 7
38 40.000 340.0 11871.50 + + + + 4 1½ x 8
26 – 50”
40 42.000 360.0 13227.00 + + + + 4 1½ x 8
42 44.000 390.0 + + + + + 4 1½ x 8
44 46.000 415.0 + + + + + 4 1½ x 8
46 48.000 425.0 14622.50 + + + + 4 1½ x 8

Style W77 AGS Flexible Coupling for AGS Vic-Ring System
Flexible Coupling AGS STYLE W77 – FOR AGS VIC-RING SYSTEM
COUPLING
for AGS Vic-Ring COUPLING COMPLETE †
System Approx.
Wgt.
With Flush-Seal Silicone Grade “L”
Size Ea. “E” or “T” Gasket Gasket SPARE PARTS
AGS STYLE W77
AGS
Refer to publication 16.12 inches Price Each Price Each Vic-Ring Plated Bolt & Nut
Nominal Coupling Price Size §
Pipe Size lb Painted Galv. Painted Galv. Each No. inches
12 14.000 48.0 $1228.50 $1698.50 $3026.00 $3495.00 + 2 1 x 5½
14 16.000 58.0 1612.50 2187.50 3350.00 3921.50 + 2 1 x 5½
16 18.000 65.0 1887.00 2615.00 3709.50 4310.50 + 2 1 x 5½
18 20.000 82.0 2520.00 3378.00 4261.50 5119.50 + 2 1⅛ x 5½
20 22.000 99.0 2688.00 3871.50 4686.50 5419.50 + 2 1⅛ x 5½
14 – 24” 22 24.000 107.0 3249.50 4362.50 4762.00 5787.50 + 2 1⅛ x 5½
24 26.000 205.0 5084.00 + + + + 4 1⅛ x 6
26 28.000 220.0 6148.50 + + + + 4 1⅛ x 6
28 30.000 227.0 8525.50 + + + + 4 1¼ x 7
30 32.000 242.0 9352.50 + + + + 4 1¼ x 7
32 34.000 255.0 + + + + + 4 1¼ x 7
34 36.000 268.0 10029.50 + + + + 4 1¼ x 7
36 38.000 298.0 11074.00 12734.00 + + + 4 1½ x 7
38 40.000 340.0 11992.00 + + + + 4 1½ x 7
40 42.000 360.0 13292.50 + + + + 4 1½ x 7
26 – 72” 42 44.000 390.0 + + + + + 4 1½ x 7
44 46.000 415.0 + + + + + 4 1½ x 7
46 48.000 425.0 14752.00 + + + + 4 1½ x 7
48 50.000 500.0 + + + + + 4 1½ x 7
52 54.000 648.0 + + + + + 4 1½ x 7
54 56.000 676.0 + + + + + 4 1½ x 7
58 60.000 720.0 + + + + + 4 1½ x 7
60 62.000 956.0 + + + + + 8 1½ x 7
72 74.000 1140.0 + + + + + 8 1½ x 7½
NOTE: 14 – 78” standard for this size range is the W77 AGS flexible coupling.
For 14 – 24” cut groove systems requiring the original groove coupling see Style 77 coupling.

SECTION 17 – Pipe Preparation Tools
Pipe Preparation
Tools

Pipe Preparation Tools
Victaulic® Roll Grooving

Please use the following guide for the proper selection of grooving roll sets for different metallic pipe
materials. Please note that all tools come equipped with carbon steel roll sets as a standard. All other
grooving roll sets are optional, where applicable.
Part Number
Groove Type Color Code Alloy Indentification
OGS Black Carbon Steel R
Black/Red Band Carbon Steel R9S
OGS-200
Silver/Red Band Stainless Steel RXS
AGS Black/Yellow Band Carbon Steel RW
Black Stainless Steel (Standard Wall Only) R
Stainless Steel – OGS
Silver Stainless Steel (Light Wall Only) RX
Black/Yellow Band Stainless Steel (Standard Wall Only) RW
Stainless Steel – AGS
Silver/Black Band Stainless Steel (Light Wall Only) RWX
StrengThin™ 100 Silver/Blue Stripe Stainless Steel (Light Wall Only) RXS
EndSeal™ (ES) Black Carbon Steel RZ
Copper † Copper Copper RR
PVC/Aluminum * Gold PVC/Aluminum RP
OGS - RG5200i Black Carbon Steel R9Q
AGS - RG5200i Black/Grey Stripe Carbon Steel RW . . . 52
† The use of the word “Copper” in the descriptions for the following tools, refers to Type K, L, M, and DWV copper tubing to CTS
dimensions. Please refer to publication 25.06.
* 6061-T4 or 6063-T4 aluminum alloy pipe must be used.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.

Roll Grooving Tools – Field Portable
VE12
Roll Grooving Tools – Field Portable

VE12 VE12 is designed for manual grooving of ¾ – 2”/DN20 – DN50 steel, stainless steel, aluminum and PVC
pipe.
Tool Weight/
Shipping
Weight Rental Tool
VE12 R000012VE0 17/20 $523.00 $3151.00
VE12SS – Lightwall Stainless Steel R200012VE0 17/20 523.00 3151.00
VE26 S/C/SS/P
VE26 S/C/SS/P VE26 is designed for manual grooving of 2 – 6”/DN50 – DN150 steel, stainless steel, aluminum, PVC, and
copper tube.
Tool Weight/
Shipping
Weight Rental Tool
VE26S – Steel, Stainless Steel R100026VE0 22/25 $496.00 $2987.50
VE26C – Copper Tube R200026VE0 22/25 496.00 2987.50
VE26SS – Lightwall Stainless Steel R700026VE0 22/25 496.00 2987.50
VE26P – Aluminum and PVC Pipe R750026VE0 22/25 496.00 2987.50
VE26/VE46 Power Drive Kit
VE26/VE46 Power The power drive kit allows for the VE26 and VE46 family of Groove In-Place manual roll grooving tools to
be operated with a stationary power drive.
Drive Kit
Tool Weight/
Shipping Weight Tool
Tool Model Part Number lb List Price
VE26/VE46 Power Drive Kit R075026KIT 7/9 $555.50
VE46/P
VE46/P VE46 is designed for manual grooving of 3½ – 6”/DN90 – DN150 steel, stainless steel, aluminum and PVC.
Tool Weight/
Shipping
Weight Rental Tool
VE46 – Steel and Stainless Steel R000046VE0 28/31 $600.00 $3613.50
VE46P – Aluminum and PVC Plastic R200046VE0 28/31 600.00 3613.50

RG1200 Roll Grooving Tool
DN50 –DN80 Schedule 80 carbon steel pipe to OGS-200 roll groove specifications. The tool is supplied
shear pins.
Tool Weight/
Shipping
Weight Rental Tool
RG1200 – OGS-200 Groove Profile R0201200CR 47.0 $496.00 $2987.50
RG1200 PARTS
Part
2 – 3” Upper Roll R9S2120U03 1 $84.50
4 – 6” Upper Roll R9S4120U06 1 84.50
2 – 3” Lower Roll R9S2120L03 1 171.00
4 – 6” Lower Roll R9S4120L06 1 171.00
OGS-200 Confirmation Gauges 2” Groove Confirmation Gauge R020120GGE 1 31.50
Adjustable Ratchet with Swivel Handle R000120RCH 1 325.00
Gear (12x26 Teeth) R0001200GR 1 124.50
RG1210 Roll Grooving Tool
shear pins.
Tool Weight/
Shipping
Weight Rental Tool
RG1210 – OGS-200 Groove Profile R0201210CR 95/153 $1200.00 $7229.00
RG1210 PARTS
Part
2 – 3” Upper Roll Assembly R9S2121U03 1 $256.00
4 – 6” Upper Roll Assembly R9S4121U06 1 248.00
8” Upper Roll Assembly R9S8121U08 1 256.00
8” Lower Roll Assembly R9S8121L08 1 445.00
Ratchet Assembly R000120RCH 1 325.00

VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/ The VE226 family of tools is designed to be operated using a standard ⅜”/9.5 mm square drive socket
wrench (not included), for roll grooving the following ¾-6”/DN20-DN150 IPS pipe: steel, stainless steel,
MSS/P † aluminum, and PVC. It can also roll groove 2-6” CTS Copper tube. Included are feeler gauges and allen
wrench for depth stop setting. Built-on mount fits Ridgid 300® power drives (optional: drive mounts are
available for the following power drives: Oster 310, Ridgid 535, Ridgid 1224, and Ridgid 1822).
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb Per Month List Price ^
VE226B – ¾ – 1½”/DN20 – DN40 R2022260FS 27/42 $555.00 $3346.00
VE226S – 1¼ – 6”/DN32 – DN150 R2002260FS 27/42 555.00 3346.00
VE226M – 2 – 6”/DN50 – DN150 R3002260FS 27/42 555.00 3346.00
VE226C – 2 – 6” R1002260FS 27/42 555.00 3346.00
VE226BSS – ¾ – 1½”/DN20 – DN40 R00X2260FS 27/42 555.00 3346.00
VE226MSS – 2 – 6”/DN50 – DN150 RXM02260FS 27/42 555.00 3346.00
VE226P – 2 – 6”/DN50 – DN150 R6002260FS 27/42 555.00 3346.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
VE226 Power Drive Kit
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid™ * 700 Power Drive.
Tool Weight/
VE226 Power Drive Kit † R700226KIT 75/115 $5440.00
† Drive unit not included.
* Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit. Victaulic is not associated with
Ridgid Tool Company.
* Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit.

Roll Grooving Tools – Field Fabrication
VE106
Roll Grooving Tools – Field Fabrication

VE106 VE106 Groove-N-Go portable roll grooving tool with a self-contained power drive provides capability of
grooving 1¼ – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool can be offered in the
following power configurations: 110V & 15 amp or 220V & 6 amps. Tool is supplied complete with
1¼” – 6”/DN32 – DN150 (4 – 6”/DN100 – DN150 rolls are installed).
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb. Per Month List Price
VE106 Groove-N-Go 110V R000106110 140/200 $1749.00 $10535.50
VE106 Groove-N-Go 220V R000106220 140/200 N/A 10535.50
VE106 GROOVING ROLLS *
Pipe Size Purchase

Range List Price
Pipe Material Part Number inches | DN Each Set †
R912106UA6 1¼ – 6/DN32 – DN50 Upper $336.50
Carbon Steel (Sch. 5 – 40)
R912106L03 1¼ – 3/DN32 – DN80 Lower 941.50
Stainless Steel (Sch. 20 – 40)
R904106L06 4 – 6/DN100 – DN150 Lower 941.50
Copper RR02106006 2–6 1318.00
Lt. Wall Stainless Steel RX
RX12106L06 1¼ – 6/DN32 – DN150 Lower 1041.50
(Sch. 5S – 10S)
RZ02106003 1¼ – 3/DN32 – DN80 1377.50
EndSeal
RZ04106006 4 – 6/DN100 – DN150 1377.50
Any tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Lt. Wall Stainless Steel), RP
(PVC/Aluminum), RZ (EndSeal) will incur an additional charge per roll set.
† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.
* Refer to How to Order at the end of this section.

VE206
VE206 VE206 portable roll grooving tool with a self-contained power drive provides capability of grooving
1¼ – 6”/DN32 – DN150 pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power
source. Tool is supplied complete with standard roll sets for steel 1¼” – 6”/DN32 – DN150
(4 – 6”/DN100 – DN150 rolls are installed).
Tool Weight Tool
VE206 – 110V with Ridgid* 700 Power Drive R000206MAS 244 $15582.00
VE206 – without power drive unit R000206MA1 220 11131.50
* Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit. Victaulic is not associated with
Ridgid Tool Company.
Other compatible power drive units are available upon request.
Pipe Size Purchase

Range List Price
Pipe Material Part Number inches | DN Each Set †
R912106UA6 1¼ – 6/DN32 – DN50 Upper $336.50
R912106L03 1¼ – 3/DN32 – DN80 Lower 941.50
R904106L06 4 – 6/DN100 – DN150 Lower 941.50
Copper RR02106006 2–6 1318.00
RX12106L06 1¼ – 6/DN32 – DN150 Lower 1041.50
(Sch. 5S – 10S)
RZ02106003 1¼ – 3/DN32 – DN80 1377.50
EndSeal
RZ04106006 4 – 6/DN100 – DN150 1377.50
Any tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Lt. Wall Stainless Steel), RP
(PVC/Aluminum), RZ (EndSeal) will incur an additional charge per roll set.

RG3212
RG3212 The RG3212 is a self-contained, transportable roll grooving tool with an integral drive motor and hydraulic
feed unit. The RG3212 requires a 120V, 15-amp power source and is supplied with a PS3212 pipe stand for
2 – 12" pipe. The available configurations for this tool are listed below.
Part Tool Weight Tool
Tool Model Number lb List Price
RG3212 Roll Grooving Tool with Carbon Steel and Schedule 20 – 40
R0003212RG 302 $12716.00
Stainless Steel Roll Package and PS312 Pipe Stand
RG3212 Roll Grooving Tool with Schedule 5 – 10 Stainless Steel
R0003212RX 302 12716.00
Roll Package and PS312 Pipe Stand
RG3212 Roll Grooving Tool with Copper Roll Package and
R0003212RR 302 12716.00
PS312 Pipe Stand
RG3212 GROOVING ROLLS *
Pipe Size Purchase

Pipe Part Range List Price
Material Number inches | DN Each Set †
R902321203 2 – 3½/DN50 – DN90 $992.50
R904321206 4 – 6/DN100 – DN150 1043.00
R908321212 8 – 12/DN200 – DN300 1092.50
RX02321203 2 – 3½/DN50 – DN90 1298.50
RX04321206 4 – 6/DN100 – DN150 1594.00
(Sch. 5S – 10S)
RX08321212 8 – 12/DN200 – DN300 1803.50
RR02321206 2 – 6/DN50 – DN150 1128.50
Copper
RR08321208 8/DN300 1453.00
RP02321203 2 – 3½/DN50 – DN90 1140.00
PVC/Aluminum RP04321206 4 – 6/DN100 – DN150 1440.00
RP08321212 8 – 12/DN200 – DN300 ¥ 1443.50
NOTE: Roll sets for the RG3212 are not compatible with other roll grooving tools.
Please reference publication 24.19 when referencing wall thickness and tool capacity ratings.
¥ This roll set grooves aluminum pipe sized 8 - 12”/DN200 - DN300 and PVC pipe sized 8”/DN200 only.

VE272SFS
VE272SFS † The VE272SFS portable roll groover mounts easily to the Victaulic Ridgid 300® Power Drive. The VE272SFS
is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick
and easy. The tool is supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 – 12”/DN200 – DN300 rolls
are installed.
NOTE: Optional ¾ and 1 – 1½”/DN20 – DN40 grooving rolls available.
Requires a Ridgid 300 power drive.
Tool Weight/
Shipping
Weight Rental Tool
VE272SFS R000272SFS 184/250 $2111.00 $12715.50^
Optional Stabilizer (8 – 12”/DN200 – DN300
R4002720FS 23 N/A 3456.50
only)
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
VE272SFS GROOVING ROLLS *
Pipe Size Purchase

Material Number inches | DN Each Set †
R900268001 ¾/DN20 $4889.00
R900268002 1 – 1½/DN25 – DN40 4211.00
R902272003 2 – 3½/DN50 – DN90 2366.50
R904272006 4 – 6/DN100 – DN150 2529.00
R908272012 8 – 12/DN200 – DN300 2820.00
Carbon Steel (OGS-200 R9S2268003 2 – 3/DN50 – DN80 2565.50
Groove Profile) R9S4268006 4 – 6/DN100 – DN150 2742.50
Stainless Steel (OGS-200 RXS2268003 2 – 3/DN50 – DN80 3497.50
Groove Profile) RXS4268006 4 – 6/DN100 – DN150 3752.00
RR02272006 2–6 2931.50
Copper
RR08272008 8 4117.50
RX75268001 ¾/DN20 4889.00
RX01268002 1 – 1½/DN25 – DN40 4211.00
RX02272003 2 – 3½/DN50 – DN90 3298.50
(Sch. 5S – 10S)
RX04272006 4 – 6/DN100 – DN150 3538.50
RX08272012 8 – 12/DN200 – DN300 3544.00
RZ02272003 2 – 3½/DN50 – DN90 3849.00
EndSeal RZ04272006 4 – 6/DN100 – DN150 3935.50
RZ08272012 8 – 12/DN200 – DN300 4094.50
RP02272003 ^ 2 – 3½/DN50 – DN90 2544.50
PVC/Aluminum RP04272006 4 – 6/DN100 – DN150 2902.00
RP08272012 8/DN200 3074.50
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.
Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP
(Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.
^ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02.

VE270FSD
VE270FSD Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power
cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is
supplied complete with 2 – 12”/DN50 – DN300 roll sets; 8 – 12”/DN200 – DN300 rolls are installed.
NOTE: Optional ¾/DN20 and 1 – 1½”/DN25 – DN40 grooving rolls available.
Tool Weight/
Shipping
Weight Rental Tool
VE270FSD – 110V R000270FSD 340/410 $4004.00 $24122.00^
Optional stabilizer
R400276FSD 23 N/A 3795.50
(8 – 12”/DN200 – DN300 only)
^ For proper operation, a pipe stand is required. See Accessories for details.
VE270FSD GROOVING ROLLS *
Pipe Size Purchase

Material Number inches | mm Each Set †
R900268001 ¾/DN20 $4889.00
Carbon Steel (Sch. 5 – 40) R900268002 1 – 1½/DN25 – DN40 4211.00
Stainless Steel R902272003 2 – 3½/DN50 – DN90 2366.50
(Sch. 20 – 40) R904272006 4 – 6/DN100 – DN150 2529.00
R908272012 8 – 12/DN200 – DN300 ‡ 2820.00
Carbon Steel (OGS-200 R9S2268003 2 – 3/DN50 – DN80 2565.50
Groove Profile) R9S4268006 4 – 6/DN100 – DN150 2742.50
Stainless Steel (OGS-200 RXS2268003 2 – 3/DN50 – DN80 3497.50
Groove Profile) RXS4268006 4 – 6/DN100 – DN150 3752.00
RR02272006 2 – 6/DN50 – DN150 2931.50
Copper
RR08272008 8/DN200 4117.50
RX75268001 ¾/DN20 4889.00
RX01268002 1 – 1½/DN25 – DN40 4211.00
RX02272003 2 – 3½/50 – 90 3298.50
(Sch. 5S – 10S)
RX04272006 4 – 6/100 – 150 3538.50
RX08272012 8 – 12/200 – 300 3544.00
RZ02272003 2 – 3½50 – 90 3849.00
EndSeal RZ04272006 4 – 6/100 – 150 3935.50
RZ08272012 8 – 12/200 – 300 4094.50
RP02272003 ^ 2 – 3½/50 – 90 2544.50
PVC/Aluminum RP04272006 4 – 6/100 – 150 2902.00
RP08272012 8/200 3074.50
‡ Wall thickness capacity for 8 – 12” pipe is limited to Schedule 5 – 20.

VE416FS
VE416FS § VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool
must be mounted to a Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied complete
with 2 – 16”/50 – 400 mm roll sets (8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified). It
is equipped with a pipe stabilizer for 6 – 16”/150 – 400 mm nominal pipe sizes to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls and 14 – 16”/350 – 400 mm AGS Rolls
Tool Weight/
Shipping
Weight Rental Tool
VE416FS R0004160FS 240/400 $5997.00 $41300.50^
§ This tool should not be used for field production grooving. For field production
grooving capabilities, use a VE450FSD tool. VE416FS/FSD is designed for occasional
field grooving of AGS pipe.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing.
VE416FS GROOVING ROLLS *
Pipe Size Purchase

R902414003 2 – 3½/50 – 90 $3632.00
R904416006 4 – 6/100 – 150 1967.50
R908416012 8 – 12/200 – 300 2129.00
Carbon Steel (Sch. 80) RS02414003 2 – 3½/50 – 90 +
AGS Standard RW RW01416016 14 – 16/350 – 400 5370.50
RR02414006 2 – 6/50 – 150 4746.50
Copper
RR08416008 8/200 3251.00
RZ02414003 2 – 3½/50 – 90 4217.50
EndSeal RZ04416006 4 – 6/100 – 150 2871.00
RZ08416012 8 – 12/200 – 300 3534.00
RX02414003 2 – 3½/50 – 90 4309.00
RX04416006 4 – 6/100 – 150 2830.00
(Sch. 5S – 10S)
RX08416012 8 – 12/200 – 300 2989.00
Lt. Wall Stainless Steel RWX
RWX1416016 14 – 16/350 – 400 7135.00
AGS (Sch. 5S – 10S)
RP02414003 2 – 3½/50 – 90 6105.50
PVC/Aluminum RP04416006 4 – 6/100 – 150 4755.00
RP08416012 8/200 3279.00

VE416FSD
VE416FSD § VE416FSD tools are completely self-contained units with integral gear motor, safety foot switch and
power cord/plug. VE416FSD uses 110V power and is supplied complete with 2 – 16”/50 – 400 mm roll sets
* (8 – 12”/200 – 300 mm rolls are installed). It is equipped with a pipe stabilizer for 6 – 16”/150 – 400 mm
nominal pipe sizes to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls and 14 – 16”/350 – 400 AGS Rolls
* For additional standard rolls and special rolls, see next page.
Tool Weigth/
Shipping
Weight Rental Tool
VE416FSD – 110V R000417FSD 340/450 $8071.00 $55580.00^
§ This tool should not be used for field production grooving. For field production
grooving capabilities, use a VE450FSD tool. VE416FS/FSD is designed for occasional
field grooving of AGS pipe.
aluminum pipe, and type K, L, M and DWV copper tubing.
Pipe Size Purchase

Material Number Inches | mm Each Set †
R902414003 2 – 3½/50 – 90 $3632.00
R904416006 4 – 6/100 – 150 1967.50
R908416012 8 – 12/200 – 300 2129.00
Carbon Steel (OGS-200
R9S4416006 4 – 6/100 – 150 2131.00
Groove Profile)
Stainless Steel (OGS-200
RXS4416006 4 – 6/100 – 150 2994.50
Groove Profile)
AGS Standard RW RW01416016 14 – 16 5370.50
RR02414006 2 – 6/50 – 150 4746.50
Copper
RR08416008 8/200 3251.00
RZ02414003 2 – 3½/50 – 90 4217.50
EndSeal RZ04416006 4 – 6/100 – 150 2871.00
RZ08416012 8 – 12/200 – 300 3534.00
RX02414003 2 – 3½/50 – 90 4309.00
RX04416006 4 – 6/100 – 150 2830.00
(Sch. 5S – 10S)
RX08416012 8 – 12/200 – 300 2989.00
RWX1416016 14 – 16/350 - 400 7135.00
RP02414003 2 – 3½/50 – 90 6105.50
PVC/Aluminum RP04416006 4 – 6/100 – 150 4755.00
RP08416012 8/200 3279.00

VE450FSD
VE450FSD VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors
to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with
4 – 12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets
(8 – 12”/200 – 300 mm rolls are installed, unless otherwise specified).
Tool Weight/
Shipping
Weight Rental Tool
VE450FSD R000450FSD 825 $11858.00 $71435.00
Optional Rolls: Optional rolls are available for 4 – 18”/100 – 450 mm light wall stainless steel
original groove; 14 – 24”/350 – 600 mm light wall stainless steel AGS groove; and 4 – 12”/
100 – 300 mm EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and
plastic.
Note: VE450FSD is designed for field use only and should not be used for shop
production.
Pipe Size Purchase

Carbon Steel (Sch. 5 – 40) R9Q1448006 4 – 6/100 – 150 $7044.00
Stainless Steel (Sch. 20 – 40) R9Q1448012 8 – 12/200 – 300 9131.50
AGS Standard RW RWQ2448024 14 – 24/350 – 600 9176.00
RXQ1448006 4 – 6/100 – 150 16529.00
Lt. Wall Stainless Steel RX RXQ1448012 8 – 12/200 – 300 13382.50
(Sch. 5S – 10S) RXQ1448016 14 – 16/350 – 400 13337.00
RXQ1448020 18/450 13547.00
RWQX448024 14 – 24/350 – 600 18182.00
RPQ1448006 4 – 6/100 – 150 +
PVC/Aluminum
RPQ1448012 8/200 +

Roll Grooving Tools – Shop Fabrication
VE268
Roll Grooving Tools – Shop Fabrication

NOTE: All shop models shipped set for 220 power, unless specified otherwise.
VE268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch
and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is
equipped with a pipe stabilizer for 8 – 12”/200 – 300 mm nominal pipe sizes to prevent pipe sway. The
tool is shipped fully assembled for standard grooving (2 – 12”/50 – 300 mm pipe) * (8 – 12”/200 – 300 mm
rolls are installed, unless otherwise specified).
NOTE: Optional ¾/20mm and 1 – 1½”/25 – 40 mm grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 or 240 volt service. They cannot be used with 208 volt service. For
individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require
different incoming power requirements.(If your service is 208 volts, a “Boost and Buck Transformer” may
be required.)
3 phase requires tool power to be hard wired by a local certified electrician.
Tool Weight/
Shipping
Weight Rental Tool
VE268 – 220V R000268VE0 735/766 $5250.00 $51640.50^
VE268 – 440V R000268VE4 735/766 5250.00 51640.50
Pipe Size Purchase

R900268001 ¾/20 $4889.00
R900268002 1 – 1½/25 – 40 4211.00
R902272003 2 – 3½/50 – 80 2366.50
R904272006 4 – 6/100 – 150 2529.00
R908272012 8 – 12/200 – 300 ‡ 2820.00
Carbon Steel (OGS-200 R9S2268003 2 – 3/50 – 80 2565.50
Groove Profile) R9S4268006 4 – 6/100 – 150 2742.50
Stainless Steel (OGS-200 RXS2268003 2 – 3/50 – 80 3497.50
Groove Profile) RXS4268006 4 – 6/100 – 150 3752.00
RR02272006 2 – 6/50 – 150 2931.50
Copper
RR08272008 8/200 4117.50
RZ02272003 2 – 3½/50 – 90 3849.00
EndSeal RZ04272006 4 – 6/100 – 150 3935.50
RZ08272012 8 – 12/200 – 300 4094.50
RX75268001 ¾/20 4889.00
RX01268002 1 – 1½/25 – 40 4211.00
RX02272003 2 – 3½/50 – 80 3298.50
(Sch. 5S – 10S)
RX04272006 4 – 6/100 – 150 3538.50
RX08272012 8 – 12/200 – 300 3544.00
RP02272003 ^ 2 – 3½/50 – 90 2544.50
PVC/Aluminum RP04272006 4 – 6/100 – 150 2902.00
RP08272012 8/200 3074.50
^ Lower roll only.
‡ Wall thickness capacity for 8 – 12” pipe is limited to Schedule 5 – 20.

VE414MC
VE414MC † NOTE: All shop models shipped set for 220 power, unless specified otherwise.
3 phase power requires tool to be hard wired by a local certified electrician.
Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard
grooving (2 – 16”/50 – 400 mm pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard,
safety foot switch and instructions are included. Pipe stabilizer for pipe 8”/200 mm and larger is included,
to prevent pipe sway.
2 – 12”/50 – 300 mm Original Groove Rolls
14 – 16”/350 – 400 mm AGS Groove Rolls
Request RP-414MC for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require different
incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be required.)
* For additional standard rolls and special rolls, see next page.
Tool Weight/
Shipping
Weight Rental Tool
VE414MC 220V R000414MC1 735/830 $8031.00 $74321.50^
VE414MC 440V R000414MC2 735/830 8031.00 74321.50^
aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm
std. wall carbon steel pipe are now standard. Contact Victaulic for pricing and availability.
For product applications requiring the original groove roll sets, please contact Victaulic for ordering
information.
VE414MC GROOVING ROLLS *
Pipe Size Purchase

Carbon Steel (Sch. 5 – 40) R902414003 2 – 3½/50 – 90 $3632.00
Stainless Steel (Sch. 20 R904416006 4 – 6/100 – 150 1967.50
– 40) R908416012 8 – 12/200 – 300 2129.00
AGS Standard RW RW01416016 14 – 16/350 – 400 5370.50
RR02414006 2 – 6/50 – 150 4746.50
Copper
RR08416008 8/200 3251.00
RZ02414003 2 – 3½/50 – 90 4217.50
EndSeal RZ04416006 4 – 6/100 – 150 2871.00
RZ08416012 8 – 12/200 – 300 3534.00
RX02414003 2 – 3½/50 – 90 4309.00
RX04416006 4 – 6/50 – 90 2830.00
(Sch. 5S - 10S)
RX08416012 8 – 12/200 – 300 2989.00
Lt. Wall Stainless Steel
RWX1416016 14 – 16/350 – 400 7135.00
RWX AGS (Sch. 5S – 10S)
RP02414003 2 – 3½/50 – 90 6105.50
PVC/Aluminum RP04416006 4 – 6/50 – 90 4755.00
RP08416012 8/200 3279.00

VE460
VE460 † NOTE: All shop models shipped set for 220 power, unless specified otherwise.
Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled with rolls for
standard grooving (4 – 24”/DN100 – DN600) .500 wall maximum. 8 – 12” rolls are installed.
4 – 12”/DN100 – DN300 Original Groove System Groove Rolls
14 – 24”/DN350 – DN600 AGS Groove Rolls
Requires 220/440 V/3 phase/60 Hz power supply. All tools are shipped 220 V as a standard. Operating
instructions included.
Request RP-460 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require
different incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may
be required.)
See kits below for components required to groove above 24”/DN600.
Tool
Railing and Weight/
Platfrom Support Shipping Rental
Part Kit Base Weight Per Recommended
Tool Model Number Roll Sets Included Included Included lb Month List Price Pipe Stand ^
VAPS224
4 – 6”/DN100 – DN150 (R000224PS0)
(R9Q1460006), OR
TOOL
8 – 12”/DN200 – DN300 VAPS1672
ONLY R000460VE0 N/A N/A 1500/1750 $19254.00 $135939.50
(R9Q1460012), (R0001672PS)
VE460
14 – 24”/DN350 – DN600 OR
(RWQ2460024) AGS VAP131R
(R101131ASY)
Optional Kits for Grooving Above 24” ‡
KIT 1
26 – 38”/ 26 – 38”/DN650 – DN950 1 1 VAPS1672
R260460KIT N/A 3447.00 19473.50
DN650 – (RWQ3460038) AGS (R550460KIT) (R551460PNT) (R0001672PS)
DN950 LIFTING POINT
FRONT
LIFTING POINT
KIT 2
40 – 50”/ 40 – 50”/DN1000 – DN1250 1* 2 ** VAPS1672
R400460KIT N/A 3873.00 19949.00
DN1000 – LIFTING POINT LIFTING POINT
(RWQ3460050) AGS (R550460KIT) (R551460PNT) (R0001672PS)
DN1250 LIFTING POINT
FRONT
LIFTING POINT
FRONT
KIT 3
54 – 60”/ 54 – 60”/DN1350 – DN1500 1* 3 ** VAPS1672
R500460KIT N/A 4331.00 20423.00
DN1350 – LIFTING POINT LIFTING POINT
(RWQ3460060) AGS (R550460KIT) (R551460PNT) (R0001672PS)

DN1500
FRONT
LIFTING POINT LIFTING POINT
FRONT
FRONT
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe.
‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit.
* Railing and Platform Kit is required only if preceding kit has not been ordered.
** Only one (1) Support Base is required if preceding kit has been ordered.

Pipe Size Purchase

Pipe Range List Price
Material Part Number inches | mm Each Set
R9Q1460006 4 – 6/100 – 150 $6414.50
R9Q1460012 8 – 12/200 – 300 6190.50
RWQ2460024 14 – 24/350 – 600 AGS 5940.50
Lt. Wall Stainless Steel RX RXQ1460006 4 – 6/100 – 150 13844.00
(Sch. 5S – 10S) RXQ1460012 8 – 12/200 – 300 12271.50
RXQ1460016 14 – 16/350 – 400 9541.00
RXQ1460020 18 – 20/450 – 500 14754.50
OGS
RXQ1460024 22 – 24/550 – 600 12388.00
Lt. Wall Stainless Steel RWX RWQX460018 14 – 18/350 – 450 AGS 12476.50
AGS (Sch. 5S - 10S) RWQX460024 20 – 24/500 – 600 AGS 12218.00
Carbon Steel (OGS-200
R9QS460008 8/200 6713.50
Groove Profile)
Stainless Steel (OGS-200
RXS8460008 8/200 12415.50
Groove Profile)
RPQ1460006 4 – 6/100 – 150 14187.50
PVC/Aluminum
RPQ1460012 8 – 12/200 – 300 13472.50
RZQ1460006 4 – 6/100 – 150 12560.50
EndSeal
RZQ1460012 8 – 12/200 – 300 10584.00

50T
50T NOTE: 50T shipped set for 380V, unless specified otherwise.
Base Tool – Fully-motorized, semi-automatic, hydraulic tool is shipped complete with safety guards and
safety foot switch.
Capable of roll grooving 14 – 72”/DN350 – DN1700 steel pipe.
Support bases are required for roll grooving 26”/DN650 and larger pipe sizes. Each support is 16”/DN400
in height and corresponds with a range of allowable pipe sizes.
Tool can also be supplied in various voltages. Contact Victaulic for details.
Tool Weight/
Shipping
Weight Rental
Tool Model Part Number lb Per Month Tool List Price
50T ^ R14050T3ZR 3800/4100 $24797.00 $149379.00
^ For proper operation, an approved pipe stand is required. See Victaulic Fabrication Cell for details.
50T Optional Accessories
50T Optional Tool

Weight/
Accessories Shipping
Part Weight Rental Recommended
Tool Model Number Roll Sets lb Per Month List Price
Pipe Stand ^
VAPS224
B (R000224PS0)
OR
TOOL ONLY A
14 – 24”/350 – 600 mm VAPS1672
R14050T3ZR 3800/4100 $24797.00 $149379.00
50T (RW90550024) AGS (R0001672PS)
OR
VAP131R
(R101131ASY)
Optional Kit for Grooving Above 24” ‡
Stand and 26 – 72”/650 –

VAPS1672
Platfor m R040550KIT 1500 mm 100 5051.00 22465.00
(R0001672PS)
Kit LIFTING POINT
LIFTING POINT
FRONT
FRONT
LIFTING POINT
LIFTING POINT
(RW90550072) AGS
FRONT

For 26-72” R040550KIT must be ordered. Includes railing kit and 3 platforms.
‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be
ordered individually or as a kit.

RG5200i
RG5200i NOTE: All shop models shipped set for 220 power. For other voltage inquiries, contact Victaulic.
RG5200i Grooving Capacity: Fully automated 4 – 12”/100 – 300 mm OGS and 14 – 16”/350 – 400 mm AGS.
Semi-automated 18 – 24”/450 – 600 mm AGS; once groove is complete, the operator must manually
measure “C” dimension with a Go/No-Go tape.
Optional stainless steel rolls available. Specify on order.
Supplied with roll sets for grooving 4 – 24”/100 – 600 mm carbon steel Schedule 10 – 40 pipe
Tool requires commission by a certified Victaulic representative
Required 18 Amp, 208 – 240 VAC three-phase power, 50/60 Hz
Victaulic VAP131R or equivalent pipe stand is required and is critical for proper operation of the RG5200i
Lease Per Month (Lease Only)
7 – 12 13 – 36 37 – 60
Tool Model 1 – 6 Months Months Months Months
RG5200i $4710.00 $3463.00 $2199.00 $1844.50
VAP131R 983.50 627.00 493.00 358.50
^ For proper operation, an approved pipe stand is required. See Victaulic Fabrication Cell for details.
Replacement reflective magnets are available for purchase at $17.00 each LIST. Request part code NM00G52004.
Stainless steel targets are available for purchase at $26.00 per sheet. Each sheet has 64 reflective targets. Targets may not be re-
used. Request part code NMSC000016.
RG5200I GROOVING ROLLS
Pipe Size
Pipe Range
Material Part Number inches | mm Lease Price Per Set
Carbon Steel (Sch. 5 – 40) R9Q1G52006 4 – 6/100 – 150 +
Stainless Steel R9Q1G52012 8 – 12/200 – 300 +
(Sch. 20 – 40) RWQ2G52024 14 – 24/350 – 600 AGS +
RXQ1G52006 4 – 6/100 – 150 +
Lt. Wall Stainless Steel
RXQ1G52012 8 – 12/200 – 300 +
(Sch. 5S – 10S)
RWX1G52024 14 – 24/350 – 600 AGS +
Lease pricing for roll sets varies on contract terms. Contact Victaulic for pricing, terms and conditions.
Roll sets for the RG5200i are not compatible with other Victaulic grooving tools.
Contact Victaulic for lease details.

Victaulic Fabrication Cell
Victaulic Fabrication Includes hydraulic adjustable pipe stand and tracks, tool support, two adjustable positioner tables, and
an assembly table. Also includes caster wheels and ball transfers. Grooving tools are offered with the
Cell package, but are not included in the price of the base package.
The Victaulic Fabrication Cell is designed for 4 – 24”/100 – 600 mm pipe for single random lengths. Pipe
lengths smaller than single randoms require friction slides.
VICTAULIC FABRICATION CELL
Description Part Number List Price

Victaulic Fabrication Cell without Grooving Tool – Base Package R001131KIT $61739.50
VICTAULIC FABRICATION CELL WITH GROOVING TOOL

Victaulic Fabrication Cell with VE414MC Roll Grooving Tool R000131414 $131520.00
Victaulic Fabrication Cell with VE460 Roll Grooving Tool R000131460 197675.00
VICTAULIC FABRICATION COMPONENTS SOLD SEPARATELY

VAP131R – Pipe Stand with V Track R101131ASY $38231.00
VAP131T – Assembly Table R200131ASY 15424.50
VAP131F – Positioner (Each) R102131ASY 12924.00
Victaulic Fabrication Description Part Number List Price

Cell Accessories V-Track Wheels NM05000010 $150.00
V-Track 6-ft. Sections (Qty. 4 required) R400131PNT 858.00
Ball Transfers NM28000002 379.50 NR
Ball Transfer Support R301131PNT 379.50
Friction Slide R208131PNT 152.50
Friction Brake R210131ASY 467.50
NR
Non-returnable
NOTE: Please refer to Tool Manuals for quantities required.

VAPS112 Pipe Stand
Tool Accessories
VAPS112 Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun
around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design
allows for rotational and forward/traverse movement. They are designed for direct use with roll grooving
tools: VE272SFS, VE268, VE270FSD.
Capacities: ¾ – 12”/20 – 300 mm IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 10¾”/273.1 mm
Min. Pipe Height from Floor: 23¼”/590.6 mm on ¾”/19.1 mm pipe
Handle Effort Required to Raise 1075 lbs Load: 50 lbs Max.
Tool Weight/
Shipping
Weight Rental Tool
VAPS 112 R000112PS0 190/220 $1314.00 $10324.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Tool Rating Data in publication
24.01.
VAPS224 Pipe Stand
VAPS224 Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and traversing
on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe ends
without dismounting pipe from stand. They are designed for direct use with roll grooving tools:
VE416/FSD, VE414MC, VE436MC, VE460, 50T.
Capacities: 2 – 24”/50 – 600 mm IPS pipe †
Vertical Stroke: 21”/533.4 mm
Min. Pipe Height from Floor: 14”/355.6 mm on 24”/609.6 mm IPS pipe
Max. Pipe Height from Floor: 39”/990.6 mm on 2”/50.8 mm IPS pipe

Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Weight/
Shipping
Weight Rental Tool
VAPS 224 R000224PS0 260/315 $1598.00 $15498.00
24.01.

VAPS1672 Pipe Stand
VAPS1672 Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation. They are
designed for direct use with roll grooving tools: VE436MC, VE460 and 50T.
Capacities: 16 – 72”/400 – 1800 mm pipe †
Vertical Stroke: 17”/431.8 mm
Min. Pipe Height from Floor: 16”/DN400 on 72”/DN1800 pipe
Max. Pipe Height from Floor: 28”/DN700 on 16”/DN400 pipe
Tool Weight/
Shipping
Weight Rental Per Tool
Tool Model Part Number lb Month List Price
VAPS1672 R0001672PS 480 $6192.00 $37304.00
24.01.
VE436MC Quick Change Slide Conversion Kit
VE436MC Quick The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a
detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper
Change Slide rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and
Conversion KIt guard setting pads (standard and AGS).
NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original
slide, shaft, set screws and roll grooving assembly for future use.
Kit Weight Kit
Conversion Kit Part Number lb List Price
VE436MC Quick Change Slide
R150436KIT 106 $17486.50
Conversion Kit
NOTE: The VE436MC tool has a maximum wall thickness range of up to .375”/9.5 mm

Cut Grooving Tools – Field Fabrication
VG28GD
Cut Grooving Tools – Field Fabrication

VG28GD Includes tool set installed for grooving 4 – 6”/100 – 150 mm standard steel pipe, crate, operating
instructions, tool bit removal kit, 10”/250 mm extension bar, depth stop adjustment tools and one extra
(Gear Drive) * 2 – 3½”/50 – 90 mm and 8”/200 mm standardgroove steel pipe tool bits.
Capacities: 2 – 8”/50 – 200 mm steel (and other IPS metallic pipe) and 3 – 6”/80 – 150 mm AWWA cast or
ductile iron pipe
(Additional bits required)
Tool Weight/
Shipping
Weight Rental Tool
VG28GD (Gear Drive) R000281AVG 37/56 $3676.00 $33114.50
NOTE: Victaulic Cut Grooving Tools require an external power drive (see Power Mule II in Pipe Preparation Tool Accessories).
VG28GD PARTS
Pipe Size/
Type Type Tool Bit Marking Purchase
Pipe Groove inches | mm Part Number Price Each
2 – 3½/50 – 90 Std. RK02280003 $577.00
Standard 4 – 6/100 – 150 Std. RK04280006 577.00
Steel (Aluminum 8/200 Std. RK08280008 577.00
Stainless and other IPS
Metallic) 2 – 3½/50 – 90 ES RK02280Z03 577.00
EndSeal 4 – 6/100 – 150 ES RK04280Z06 577.00
8/200 ES RK08280Z08 577.00
AWWA # Cast and Standard (Rigid) 3 – 6/80 – 150 CIR * RK03280G06 1120.00
Ductile Iron Flexible 3 – 6/80 – 150 CIF RK03280E06 1120.00
2 – 3½/50 – 90 RK02280S03 444.50
Stainless Steel SS 4 – 6/100 – 150 RK04280S06 494.00
8/200 RK08280S08 522.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]).
NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.

VG28GD-ABR
VG28GD-ABR The standard VG28GD tool can be equipped to provide grooving for lined piping systems susceptible to
abrasion. Parts for cut grooving for abrasive services are found in the parts required for abrasive systems
table. For details for abrasion grooving please refer to publication 25.03. The VG28GD tool is required for
use with VG28GD-ABR spare parts. These parts must be ordered separately for abrasive grooving services.
Capacities: 2 – 8”/50 – 200 mm carbon steel.
PARTS REQUIRED FOR ABRASIVE SYSTEMS
Pipe Size/
Type Tool Bit Marking
Pipe Part inches | mm Part Number Price Each
2 – 3½/50 – 90 RK02280003 $577.00
Knives/Tool Bit 4 – 6/100 – 150 RK04285M06 976.00
Steel
8/200 RK08285M08 912.00
Stop Spacers † 2 – 8/50 – 200 R001285MCH 555.50
† Two Required
Rubber Lining
Pipe
Tool Bit Arm
Pipe Stop
VDG26GD
VDG26GD Includes tool set for grooving 6”/150 mm double groove standard carbon steel pipe. Also includes
crate, operation instructions, tool bits, tool bit removal kit, 10”/250 mm extension bar and depth stop
(Gear Drive)* adjusting tools.
Capacities: 6”/150 mm carbon steel
NOTE: For details on grooving pipe to be joined with Style 808 Double Groove Couplings, please refer to
publication 25.04.
Tool Weight/
Shipping
Weight Rental Tool
VDG26GD ** R000284AVG 37/56 $5847.00 $48219.00
** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.
VDG26GD PARTS
Pipe Pipe Size/

Type Tool Bit Marking Part
Pipe Knife/Bit inches | mm Number Price Each
A 6/150 RK04284A06 $1545.00
Carbon Steel
B 6/150 RK04284B06 1545.00
Tool Bit Arm NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Pipe Stop

VG26GD-COR
VG26GD-COR Includes tool set for grooving Schedule 40 or higher 2 – 6” MRL (machined for rubber lining) pipe. This
tool grooves pipe for abrasion and corrosion only. It is equipped with a shipping crate, operating
(Abrasion and instructions, tool bits, tool bit removal kit, 10” extension bar and depth stop adjusting tools.
Corrosion) For details on abrasion, refer to publication 25.03 and for corrosion, refer to publication 25.10.
Capacities: 2 – 6”/50 – 150 mm carbon steel.
Tool Weight/
Shipping
Weight Rental Tool
VDG26GD-COR ** R000282AVG 37/56 $5847.00 $50767.00
** The VDG26GD is used to prepare pipe ends for Victaulic Style 808 Double Groove Couplings only.
PARTS REQUIRED FOR ABRASIVE SYSTEMS
Pipe Size/
Pipe Part inches | mm Part Number Price Each
2 – 3½/50 – 90 RK02282003 $1773.00
Knives/Tool Bit 4 – 6/100 – 150 RK04285M06 976.00
Steel
8/200 RK08285M08 912.00
Stop Spacers † 2 – 8/50 – 200 R001285MCH 555.50
† Two Required

VG824
VG824 * Includes tool set installed for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit
removal kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit.
Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile pipe (Additional bits required)
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping
Weight Rental Tool
VG824 R000824AVG 82/135 $5091.00 $61663.00
VG824 PARTS
Tool Bit Pipe Stop

Pipe/Size
Pipe/Size Marking
Type Marking Part Purchase inches | Part Purchase
Type Pipe Groove inches | mm Number Price Each mm Number Price Each
8 – 24/ 8 – 12” Std. R424824AVG $1202.50
Steel (and Standard RK08824024 $516.50
200 – 600 Std. 14 – 24” Std. R024824AVG 1202.50
other IPS
Metallic) 8 – 12/
EndSeal RK08824Z12 681.50 8 – 12” Std. R424824AVG 1202.50
200 – 300 ES
8/200 CIR RK08824G08 681.50 8/200 CI R524824AVG 1202.50
10 – 12/ 10 – 12/250 –
RK10824G12 681.50 R024824AVG 1202.50
Standard 250 – 300 CIR 300 CI
(Rigid) 14/350 CIR RK14824G14 681.50 14/350 CI R224824AVG 1202.50
AWWA # Cast 16 – 24/ 16 – 24/400 –
and Ductile RK16824G24 681.50 R324824AVG 1202.50
400 – 600 CIR 600 CI
Iron
8 – 12/
RK08824E12 681.50 8/200 CI R524824AVG 1202.50
200 – 300 CIF
Flexible 14 – 24/
10 – 12/250 –
250 – RK14824E24 681.50 R024824AVG 1202.50
300 CI
600 CIF
8 – 24/
Stainless Steel SS RK08824X24 1149.00 – – –
200 – 600
NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe.
Center adjustable stop (Part. No. R-025-824-AVG) available.

VG824-ABR
VG824-ABR The standard VG824 tool can be converted to cut groove pipe to MRL (machined for rubber lining)
dimensions to accept rubber lining for abrasion only services. Special tool bits, pipe end stop spacers,
(Abrasion Only) stop guide and pipe stop screw must be purchased separately. For details on groove dimensions for
rubber lining for abrasive services, refer to publication 25.03.
Note: The VG824 tool is required for use with VG824-ABR spare parts. These parts must be ordered
separately for abrasive grooving services.
VG824ABR PARTS
Item # Description Part Number No. Required Price Each

1 8 – 12”/200 – 300 mm Tool Bit RK08825M12 1 $908.00
2 14 – 16”/350 – 400 mm Tool Bit RK14825M16 1 908.00
3 18 – 24”/450 – 600 mm Tool Bit RK18825M24 1 908.00
Pipe
4 8 – 12”/200 – 300 mm Spacer † R024825MCH 2 365.50
5 14 – 24”/350 – 600 mm Spacer † R025825MCH 2 365.50
6 Stop Guide R026825MCH 1 2449.00
Rubber Lining 7 Guide Screw R226824AVG 1 846.00
† Two Required
18-24 AB R AS .
8-24 S T D

8-12 MR L
B
8 – 12" 14 – 16" 18 – 24" NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Tool Bit Tool Bit Tool Bit
1 2 3
6
7

VG824-COR
VG824-COR Includes tool set to groove 8 – 24”/200 – 600 mm MRL (machined for rubber lining) pipe. This tool
grooves pipe for abrasion and corrosion only. It is equipped with a shipping crate, operating
(Abrasion and instructions, tool bits, tool bit removal kit, and depth stop adjusting tools. For details on MRL for Abrasion
Corrosion) and Corrosion, refer to publication 25.03. For details on MRLA, refer to publication 25.10.
Capacities: 8 – 24”/200 – 600 mm carbon steel cor abrasion and corrosion
Tool Weight/
VG824-COR R000825AVG 82/126 $74609.50
VG824-COR PARTS
Part
Item # Description Number Price Each
1 8 - 12”/200 - 300 B Tool Bit RK08825M12 $908.00
2 8 - 12”/200 - 300 mm G Tool Bit RK08824024 516.50
5 14 - 16”/350 - 400 mm RK14825M16 908.00
6 14 - 16”/350 - 400 mm RK14825N16 908.00
9 18 – 24”/450 – 600 mm B Tool Bit RK18825M24 908.00
10 18 – 24”/450 – 600 mm G Tool Bit RK18825N24 908.00
1 2 3 4
11 Center Pipe Stop R025824AVG 2294.50
13 † 14 – 24”/350 – 600 mm Pipe Stop R024824AVG 1202.50
5 6 7 8 9 10 † Two Required
NOTE: The Tool Bits are for the VG824-COR tool only. The VG824-COR is the only tool that can cut groove MRL pipe. Pipe stops
and center stops are the same for the VG824 cut grooving tool.
VG824DG
VG824DG Includes tool set to groove 8 – 12”/200 – 300 mm double groove on carbon steel pipe. Also includes
crate, operating instructions, tool bits, tool bit removal kit and depth stop adjusting tools.
Note: The VG824DG tool is used to fabricate pipe for the Victaulic Style 808 Double Groove Coupling.
Refer to publication 25.04 for grooving specifications.
Capacities: 8 – 12”/200 –300 mm carbon steel
Tool Weight/
Shipping
Weight Rental Tool
VG824DG R000827AVG 82/126 $9074.00 $74609.50
Pipe Pipe Stop VG824DG PARTS
Pipe Size/
Description Groove inches | mm Part Number Price Each
Tool Bit Arm 8 – 12/200 – 300 mm A RK08824024 $516.50
Knives/Tool Bits Double Groove
8 – 12/200 – 300 mm B RK08824024 516.50
VG824DG PARTS REQUIRED FOR ES GROOVES
Pipe Size/
Type Tool Bit Marking Part
Description Groove inches | mm Number Price Per Set of 2
Center Stop Double Groove 8 – 12/200 – 300 mm R076827HTR $1940.50
Stops † Double Groove 8 – 12/200 – 300 mm R074827HTR 1169.50
† Two Required

VG828
VG828 Includes tool set for grooving 14”/350 mm standard carbon steel pipe, shipping crate, operating
instructions, tool bit removal kit, depth adjusting tools and one extra tool bit.
Note: The VG828 tool has been designed for cut grooving .500”/12.7 mm or heavier carbon steel pipe
14 – 24”/350 – 600 mm. Designed for AGS systems only.
Tool Weight/
Shipping
Weight Rental Tool
VG828 R000828AVG 82/126 $9075.00 $70369.50
VG828 PARTS
Tool Bit/Knife Pipe Stop

Pipe Center Stop
Pipe/Size Purchase Pipe/Size Purchase
Type Type Marking Price Marking Part Price
Pipe Groove inches | mm Part Number Each inches | mm Number Each
14 – 24/350 –
Tool Bit Arm 14 – 24/350 – 600 RK14828W24 $1202.50 R024824AVG $1202.50
600 Front †
Steel AGS
8 – 24/200 –
– – – R025824AVG 2294.50
600 Center
† Two Required

VG Vic-Groover
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are
supplied with an extra tool bit and ratchet handle. 2”/50 mm and larger tools include a power yoke.
Refer to publication 24.01 Power yoke is available for ¾/20 mm and 1”/25 mm (Part. No. R0240030VG). 1¼/32 mm and 1½”/40 mm
(Part No. R0240050VG) tools at $351.00 additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit
Outside VG Tool Part Number
Size Diameter Weight Each
inches | DN inches lb Standard ES Price Each
¾/20 1.050 11.0 R0000030VG – $2994.50
1/25 1.315 11.0 R0000040VG – 2994.50
1¼/32 1.660 12.0 R0000050VG – 2994.50
1½/40 1.900 12.0 R0000060VG – 2994.50
2/50 2.375 12.0 R0000080VG R00E0080VG 3337.50
2½/65 2.875 16.0 R0000100VG R00E0100VG 4183.00
3/80 3.500 16.0 R0000120VG R00E0120VG 4307.00
4/100 4.500 18.0 R0000160VG R00E0160VG 4688.50
5/125 5.563 25.0 R0000200VG – 6478.50
6/150 6.625 25.0 R0000240VG R00E0240VG 6478.50
8/200 8.625 45.0 R0000320VG R00E0320VG 6829.50
* Tools for Stainless Steel add $57.00 to the standard tool price.
NOTE: Standard Tool offering is for carbon steel and aluminum pipe only.
REPLACEMENT TOOL BITS/KNIVES
Size Standard ES Stainless Steel

Price Price Price
inches | mm Part Number Each Part Number Each Part Number Each
¾/20 R0080030VG $303.50 – – R0660050VG $366.50
1/25 R0080030VG 303.50 – – R0660050VG 366.50
1¼/32 R0080030VG 303.50 – – R0660050VG 366.50
1½/40 R0080030VG 303.50 – – R0660050VG 366.50
2/50 R0080030VG 303.50 R0640080VG $391.00 R0660050VG 366.50
2½/65 R0080030VG 303.50 R0640080VG 391.00 R0660050VG 366.50
3/80 R0080030VG 303.50 R0640080VG 391.00 R0660050VG 366.50
3½/90 R0080140VG 303.50 – – R0660140VG 366.50
4/100 R0080140VG 303.50 R0640160VG 417.00 R0660140VG 366.50
5/125 R0080200VG 502.00 – – R0660200VG 561.50
6/150 R0080200VG 502.00 R0640240VG 550.50 R0660200VG 561.50
8/200 R0300320VG 562.00 R0640320VG 617.00 R0660320VG 603.00
TOOL COMPLETE FOR DUCTILE IRON PIPE
Size VG Tool for Cast Pipe (Gray and Ductile)

inches | mm Style OD Weight Part Number Price Each
3/80 Rigid 3.960 20.0 R00R015CVG $6901.00
3/80 Flexible 3.960 20.0 R00F015CVG 6901.00
4/100 Rigid 4.800 26.0 R00R019CVG 6901.00
4/100 Flexible 4.800 26.0 R00F019CVG 6901.00
6/150 Rigid 6.900 27.0 R00R027CVG 6901.00
6/150 Flexible 6.900 27.0 R00F027CVG 6901.00
8/200 Rigid 9.050 40.0 R00R036CVG 10870.50
8/200 Flexible 9.050 40.0 R00F036CVG 10870.50

VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are
supplied with an extra tool bit and ratchet handle. 2”/50 mm and larger tools include a power yoke.
Refer to publication 24.01 Power yoke is available for ¾/20 mm and 1”/25 mm (Part. No. R0240030VG). 1¼/32 mm and 1½”/40 mm
(Part No. R0240050VG) tools at $351.00 additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe CPVC/PVC Tool Complete w/Yoke and Extra Tool Bit
Outside
Size Diameter Weight Each VG Tool Part
inches | mm inches lb Number Price Each
2/50 2.375 12.0 R00P008PVG $1248.50
2½/65 2.875 16.0 R00P010PVG 1248.50
3/80 3.500 16.0 R00P012PVG 1248.50
4/100 4.500 18.0 R00P016PVG 1248.50
6/150 6.625 25.0 R00P024PVG 1498.00
8/200 8.625 45.0 R00P032PVG 1747.50
NOTE: Standard Tool offering is for carbon steel and aluminum pipe only.
REPLACEMENT TOOL BITS/KNIVES
Size CPVC/PVC
inches | mm Part Number Price Each
2/50 R067003PVG $366.50
2½/65 R067003PVG 366.50
3/80 R067003PVG 366.50
4/100 R067014PVG 366.50
6/150 R067020PVG 562.00
8/200 R067032PVG 603.00
REPLACEMENT TOOL BITS/KNIVES FOR DUCTILE IRON PIPE
Size Extra Knife for CI

inches | mm Style Part Number Price
3/80 Rigid/Flexible R008015CVG $1072.50
4/100 Rigid/Flexible R008015CVG 1072.50

VG412
VG412 VG412 orbital grooving tool includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron
rigid groove. Power drive supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra
charge.
Capacities: 4 – 12” ductile iron pipe
NOTE: Specifically designed for field closure pieces. Not suitable for production grooving.
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping
Weight Rental
VG412 Orbital Grooving Tool R000412AVG 270/365 $5506.00 $72705.00
IPS Steel kit for cutting and grooving*
N003412034 – – 12014.00
(recommended only for lined steel pipe)
Optional flexible spacer blocks:
N220412667 – – 429.00
4 – 6” /DN100 – DN150
8” /DN200 N220412668 – – 462.50
10 – 12” /DN250 – DN300 N220412669 – – 478.00 NR
NR
Non-returnable
VG412 PARTS
Pipe Size
Type Knife Tool Bit Marking Purchase
Pipe Style inches | mm Part Number Price Each
Straight 4 – 6/100 – 150 N220412680 $749.00 NR
Angled 4 – 6/100 – 150 N220412568 749.00 NR
AWWA Cast and
Straight 8 – 12/200 – 300 N220412679 749.00 NR
Ductile Iron #
Angled 8 – 12/200 – 300 N220412569 749.00 NR
Solid Cut-Off Blade N275412055 233.00 NR
Straight 4 – 6/100 – 150 N220412678 587.00
Angled 4 – 6/100 – 150 N220412571 587.00
Angled 8/200 N220412572 587.00
Steel (and other IPS Straight 8/200 N220412677 587.00
Metallic) Angled 10 – 12/250 – 300 N220412570 587.00
Straight 10 – 12/250 – 300 N220412676 587.00
Solid Cut-Off Blade 1 of 2 N220412809 256.50
Solid Cut-Off Blade 2 of 2 N220412808 256.50
NR
Non-returnable

Cut Grooving Tools for CPVC/PVC Plastic Pipe
CG1100
Cut Grooving Tools for CPVC/PVC Plastic Pipe

CG1100 CG1100 is designed for manual grooving of 2 – 12”/DN50 – DN300 CPVC and PVC pipe.
Portable light weight field or shop fabrication tool. Designed to provide a radius PGS-300 cut groove in
Schedule 40-80 chlorinated polyvinyl chloride (CPVC) and polyvinyl chloride (PVC) pipe.
Includes tool with arms, cutter bits, alignment blocks, adjustment tools for each size range, Go/No-Go
Groove Diameter Cable and Instruction Manual are also included. Batteries, a battery charger are included
with new tools only.
A pipe stand is required to secure the pipe safely such as a chain style pipe vise or similar. This pipe stand
is not included with the CG1100 tool crate.
Approx. Wgt.
Ea. Rental
Tool Model Part Number lb Per Month * Price Each
CG1100 R2001100CG 17.0 $1553.50 $9359.00
Tool bits for 2 – 4” PGS-300 Cutter Bit R110110001 – – 95.50
Tool bits for 6 – 12” PGS-300 Cutter Bit R110110002 – – 106.50
Alignment Blocks 2 – 4” R023110MCH – – 64.00
Alignment Blocks 6 – 12” R024110MCH – – 64.00
GDC-PGS-300 Go/No-Go Groove
R155GDCASY – – 57.00
Diameter Cable
Cordless Retrofit Kit R000110KIT 6.0 – 1694.50
Depth Stop Retrofit Kit R100110KIT 2.0 – 708.50
* Lithium Ion battery is not included with tool rental.
VPG824
VPG824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate,
operating instructions, and tool bit chuck wrench.
Capacities: 8 – 16”/200 – 400 mm Schedule 40 – 80 PVC and similar plastic pipe only
Tool Weight/
Shipping
Weight Rental
VPG824 Cut Grooving Tool R000826VPG 47/53 $5321.00 $35616.50
Extra tool bits for 8”/200 mm standard
R025826MAC – – 736.00
plastic radius cut grooving
Extra tool bits for 10 – 16”/250 – 400
R023826MAC – – 1062.50
mm standard plastic radius cut grooving

CG3300/3500 Cut Grooving Tool for HDPE Pipe
Cut Grooving Tools for HDPE Pipe

CG3300/3500 Cut grooving tools are designed for grooving 16 – 36” HDPE (DR7 – DR21) pipe. The tool mounts on the
exterior pipe wall and cuts and grooves the end of the pipe in a single operation.
The CG3300 and CG3500 tools connect directly to a 120-volt, 50-60 Hz, 20-amp power source. An
optional 220-volt single phase, 50-60 Hz model is also *regionally available.
Tool Weight Rental Tool
CG3300 – 16 – 26”/400 – 630 mm R0003300CG 580 $1895.00 $124581.50
CG3500 – 24 – 36”/630 – 900 mm R0003500CG 715 1895.00 166627.50
REPLACEMENT TOOL BLADES/KNIVES
Size Part
Tool Model inches Description Number Price Each
CG3300 16 – 22 Cutoff Stepped Blade R111310022 $904.50
CG3300/CG3500 - 24-36 Blade 24 – 36 Cutoff Stepped Blade R111310036 935.50
CG3300/CG3500 16 – 36 Grooving Knife R151310MCH 1076.50
ACCESSORIES
Part
Groove Confirmation Gauge Number Price Each
CG3300 R900330ASY $952.00
CG3500 R900350ASY 1059.50
Style 926 Spigot Hole Saw for HDPE Pipe
Style 926 Spigot Hole Spigot hole cut saw designed to cut 4”/DN100 and 6”/DN150 holes in HDPE pipe. For Style 926
Mechanical-T Spigots. For details on the Style 926 Mechanical-T Spigot outlet, refer to publication 11.07.
Saw for HDPE Pipe
Nominal Size Cutter Diameter Purchase
inches inches Part Number List Price Each
4 4.500 R040926HHS $705.00
6 6.625 R060926HHS 1050.50

Hole Cutting Tools
VHCT900
Hole Cutting Tools

VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon
remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded
120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option). For Sizes over 2 3/4”/70 mm or
when speed control is needed for various materials, use an inline speed controller to reduce hole saw
wear and improve performance.
Capacities: 1 – 4½”/25 – 120 mm holes for ½ – 4”/15 – 100 mm Mechanical-T, Strapless Outlet
connections.
Tool Weight/
Shipping
Weight Rental Tool
VHCT900 – 110V R000900HCT 36/61 $677.00 $9517.00
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 2¾” carbon and stainless
steel pipe. This allows for use of Mechanical-T, Strapless Outlet, Thermometer Outlet and Style 922 Outlet
Tee. Requires 110 volt power supply to operate. For sizes over 2¾”/70 mm or when speed control is
needed for various materials, use the supplied inline speed controller to reduce hole saw wear and
improve performance.
Capacities: 1 – 2¾”/25 – 70 mm holes for ½ – 2½”/15 – 76 mm Mechanical-T connections.
Tool Weight/
Shipping
Weight Rental Tool
HCT908 R000908HCT 35/48 $964.00 $5806.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
Accessories
Accessories Saw Diameter Purchase

inches | mm Part Number List Price Each
1/25.4 NM18000011 $187.50
1¼/31.8 NM18000016 187.50
1½/38.1 NM18000021 187.50
1¾/44.5 NM18000026 187.50
2/50.8 NM18000031 187.50
2⅜/60.33 NM18000036 210.00
2½/63.5 NM18000037 210.00
2¾/69.9 NM18000040 210.00
3½/88.9 NM18000047 210.00
4½/114.3 NM18000050 210.00
Purchase
Part Name Part Number List Price
Arbor (Mandrel) R400900HCT $505.00
Arbor (1”/ 25.4 mm saw only) R450900HCT 714.50
Chuck Key Assembly R314900HCT 227.50
Levels NM14000006 141.50
Coupon Remover Assembly R050900HCT 107.50
Long Chain – For Strapless Outlet * R170900HCT 1824.50
* For use with VHCT900 to accommodate pipe sizes greater than 610.0 mm.

Vic-Tap II Hot Tap
Vic-Tap II * Parts A and B are designed for use with Vic-Tap II Mechanical-T units; (Part C) for tapping into systems
under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2⅜” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2½” full port ball valve factory mounted. Available in sizes 4 x 2½”, 5 x 2½”, 6 x
2½”, and 8 x 2½”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Shipping
Weight Rental
Vic-Tap II - Parts A and B only R000902VT2 70 $2778.00 $16734.50
Part A only R100902VT2 – – 11415.50
Part B only – – – –
Part C †
4 x 2½”/100 x 65 mm R016931010 – – 3355.50
5 x 2½”/125 x 65 mm R020931010 – – 3355.50
6 x 2½”/150 x 65 mm R024931010 – – 3355.50
8 x 2½” /200 x 65 mm R032931010 – – 3355.50
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $1105.50.
Part. No. N-E15-000-004.
NOTE: 40”/1016 mm minimum clearance is required for the Vic-Tap II.
† Part C available galvanized. Contact Victaulic for pricing and delivery.

Pipe Cut-Off Tools
VCT1 – Manual
Pipe Cut-Off Tools

VCT1 VCT1 Manual handles 4 – 24”/100 – 600 mm pipe up to 0.500”/12.7 mm thick. A worm gear drive crank
handle provides smooth, manual travel, easy control and accurate cutting. Tools are supplied with one
each #00, #0, and #1 acetylene tip. Other tips are available for propane, MAPP and other gases. Tools are
supplied with tip cleaner and lighter.
Capacities: 4 – 24”/100 – 600 mm pipe *
Wall Thickness: 0.065” – 0.0500”/1.65 - 1.27 mm (with tips supplied)
Tool Weight/
VCT1 R000911VCT 22/29 $7791.50
* To increase capacity, a 40-inch chain is available for $693.50 (Part No. N-C00-002-VCT).
VCT2 – Automatic
VCT2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is
recommended for cuts on vertical pipe (over 12”/300 mm diameter). Tools are supplied with one each
#00, #0, and #1 acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are
supplied with tip cleaner and lighter.
Capacities: 6” – 24”/150 – 600 mm pipe *
Wall Thickness: 0.065” – 0.0500”/1.65 – 1.27 mm (with tips supplied)
Speed Control: SCR
Power Required: 120 VAC
Motor Rating: 15 W 10,000 rpm
NOTE: Guide rail is sold separately. Recommended for pipe 14”/350 mm and above.
Tool Weight/
Shipping Weight
VCT2 R000912VCT 33/39 $18803.50
Guide Rail D-600 for up to 24”/600 mm
NC00170VC2 10 4954.00
pipe
* To increase capacity, a 40-inch chain is available for $693.50 (Part No. N-C00-002-VCT).
Accessories
Accessories VCT1 & VCT2 STANDARD TIP FOR ACETYLENE (102)
Size Part Number Price Each

00 NC00102T00 $165.00
0 NC001020T0 165.00
1 NC001020T1 165.00
FLASHBACK ARRESTOR QUICK DISCONNECT
Size Part Number Price Each

Fuel Assy. – ZOSP – 2A NCZS000P2A $347.50
Oxy. Assy. – ZOSP – 1A NCZS000P1A 347.50
Fuel Plug – ZOP – 2A NCZ0000P2A 227.00
Oxy. Plug. – ZOP – 1A NCZ0000P1A 227.00

PC3110 Cut and Mark Tool with Chamfering Feature
Cut and Mark Tool The PC3110 is a lightweight tool designed to work with a power drive. It simultaneously cuts the pipe,
marks the outside diameter of the pipe with insertion marks for proper installation of the QuickVic™ SD
with Chamfering Installation-Ready™ couplings and fittings, and chamfers the pipe end to remove any sharp edges.
Feature Capacity: 1/2 – 2”/DN15 – DN50
Victaulic Part Approx. Wgt. Ea.
PC3110 Description Quantity Code lb Price Each
Refer to publication 34.01 PC3110 Cut & Mark Tool with Chamfering
Feature - Includes (1) hinge pin and (5) 1 R004311CNP 11.0 $404.50
replacement cutting wheels
Replacement Cutting Wheels 5 R000311WHL 0.1 82.00
Cutting Wheel Kit - Includes (1) cutting

wheel, (1) cutting wheel shaft and (1) 1 R000311CWL 0.3 28.00 NR
c-clip
Knurled Rolls Kit with Chamfering

Feature - Includes (1) flat roll, (1)
1 R000311CRL 1.3 135.50
chamfering roll, (2) roll shafts and (2)
c-clips
NOTES
The PC3110 Cut and Mark tool is shipped with (1) hinge pin and (5) extra cutting wheels.
There are three spare kits available: the (5) pack of cutting wheels; the Cutting Wheel kit; and the Knurled Rolls kit.
NR
Non-returnable

Vic-Press™ Tool
PFT510
Vic-Press™ Tool
PFT510 The Vic-Press tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and
includes:
Case 1 – PFT510 Vic-Press tool, 2 18V lithium ion batteries, 120 VAC charger, wire brush, 1 paint stick and 1
tube of lubricant
Case 2 – ½”/DN15, ¾”/DN20, and 1”/DN25 jaws, 1½”/40 mm and 2”/50 mm ring-jaws, ring-jaw adapter jaw,
insertion gauge set
WARNING: The PFT510 Vic-Press tool is designed for use only with Vic-Press Schedule 10S system
couplings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this
tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and
property damage. Refer to TM-PFT510 for complete tool operating instructions.
Tool Weight/
Shipping
Weight Rental Tool
Tool Model Part Number lb # Per Month * List Price
PFT510 Vic-Press™ Tool – 18V R120510PFS 102 $1904.00 $15756.00
# Weight is for tool and complete set of jaws.
Contact Victaulic for Replacement Gauge Kit (R000501SET) pricing and availability.
* Lithium Ion battery is not included with tool rental.
REPLACEMENT PFT510 JAWS AND ADAPTER
Description / Jaw Size

inches Part Number List Price
PFT510 Jaw Adapter RJAW510ADP $1338.00
½ RJAW510050 1099.00
¾ RJAW510075 1099.00
1 RJAW510100 1099.00
1½ RJAW510150 4229.00
2 RJAW510200 4229.00

Pipe Preparation Tool Accessories
Power Mule II
Pipe Preparation Tool Accessories

Power Mule II Electrical motor, gear driven, 2 hp power source for all Victaulic cut grooving tools with 1”/25 mm drive
connection, integral safety foot switch and reversible motor (requires 115/1/60-20 amp circuit*).
(External Power
Capacities: Victaulic grooving tools as noted.
Source)
* 220V optional
Tool Weight/
Shipping
Weight Rental Tool
Power Mule II (External Power Source) – 110V R200700MUL 190/205 $4950.00 $33103.00
PT100A Go/No-Go Pipe Tape
PT100A Pocket sized Go/No-Go Grooved Pipe Diameter tapes are available for taking circumferential
measurements on pipe sizes ¾ – 24”/20 – 600 mm. This diameter tape contains Go/No-Go markings on
one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and diameter markings to 100th of an
inch on the other side. Tapes are notched on the lead end to allow proper overlap within the groove for
more accurate measurement.
Tool Model Part Number Purchase Price
PT-100-A Imperial Go/No-Go Grooved
RW75-100-MCH $125.00
Pipe Diameter Tape Each
Box of 6 RW75-100-KIT 675.50
NOTICE
• Tape contains Go/No-Go markings on one side for use with ¾ – 24”/20 – 600 mm pipe in ANSI B36.19
and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other side.
• The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic original
and Machined for Rubber Lining (MRL) (¾ – 12”/20 – 300 mm) and Advanced Groove System (AGS)
(14 – 24”/350 – 600 mm) groove diameter specifications.
• Tapes are notched on the lead end to allow proper overlap within the groove for more accurate
measurement.
• The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3; 267.4; and
318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to 20”), copper tube
sizes, and the steel and stainless steel pipe sizes listed above, use the side of the tape marked in 0.01”
increments.
• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions,
always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifications
publications located on www.victaulic.com.

PT102A AGS Go/No-Go Pipe Tape
PT102A Go/No-Go pocket-sized AGS Pipe diameter tapes are available for taking circumferential measurements
on pipe sizes 8 – 72”/200 – 1800 mm.
Tool Model Part Number Purchase Price
PT102A AGS Go/No-Go Grooved Pipe
RW00102ASY $208.00
Diameter Tape
NOTICE
• Tape contains Go/No-Go markings on one side for use with Original Groove System sizes 8 – 12”/
200 – 300 mm pipe and Advanced Groove System sizes 14 – 72”/300 – 1800 mm pipe in ANSI B36.10/
B36.19 and many ISO-4200 sizes. In addition, the PT102 contains markings in 0.02”/0.5 mm increments
on the opposite side.
• The opposite side of the diameter tape can be used to check Victaulic original groove specifications in
14 – 42”/200 – 1050 mm pipe sized, including China pipe sizes and JIS specifications 8 – 12”/200 – 300
mm pipe sizes.
• The Go/No-Go pipe tape is a quick reference guide only, it is not a replacement for a calibrated
diameter measuring instrument. To ensure proper grooving dimensions, always refer to the I-PT102
Victaulic Go/No-Go Pipe Diameter Tape Instructions Manual or to the latest groove specifications
publications located on www.victaulic.com.
GDC-CTS Go/No-Go Groove Diameter Cable
GDC-CTS Go/No-Go pocket-sized groove diameter cables for 2-8” CTS Standard - Types K, L, M hard-drawn copper
tubing per ASTM B88 and drain-waste-vent (DWV) per ASTM B 306.
Model Part Number Purchase Price
GDC-CTS Go/No-Go Groove Diameter Cable R051GDCASY $57.00
GDC-PGS-300 Go/No-Go Groove Diameter Cable
GDC-PGS-300 Go/No-Go pocket-sized groove diameter cables for 2-12” CPVC and PVC Pipe.
Tool
Model Part Number List Price
GDC-PGS-300 Go/No-Go Groove Diameter Cable R155GDCASY $57.00
Tool Carry Bag
Tool Carry Bag Heavy duty tool carry bag for transporting Roll Grooving Tools, grooving rolls, and other tools. Carry bag
can accommodate up to 50 lbs.
Tool Weight/
Tool Carry Bag NM15000002 4/6 $226.00 NR
NR
Non-returnable

No. T-60 Test Cap Kit
System Safety Test Accessories

Test Cap Kit Description Part Code Price Each
Complete Kit – Includes case, dividers and
NO. T-60 two No. T-60 Test Caps per size in 2 – 8”/DN50
K000T60KIT $2102.50 NR
– DN200. 10”/DN250 and 12”/DN300 T-60 Test
Caps must be purchased separately.
Individual Test Caps

Size – inches Part Code Price Each
2 K020T60PYV $138.00
2½ K024T60PYV 141.50
3 K030T60PYV 147.50
4 K040T60PYV 174.00
6 K060T60PYV 212.50
8 K080T60PYV 306.50
10 K100T60PYV 529.50 NR
12 K120T60PYV 795.00 NR

NR
Non-returnable

WARNING
• Always read and understand all operating and maintenance instructions before
attempting to use any Victaulic pipe preparation tools.Victaulic tool operating
and maintenance manuals can also be located at victaulic.com.
• Any Victaulic pipe preparation tools must be used by trained operators ONLY.
Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound
welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may
result in serious personal injury, property damage, and/or product damage.
How To Order When ordering tools or tool parts, please include the following information:
A. PARTS ORDERS
1. Tool Model Number. Example: VE272SFS.
2. Tool Serial Number. The serial number can be found on the tool name plate.
3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump.
4. Where to send the part(s). Company Name, Address and Telephone Number
5. Attention: Person’s Name
6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
B. TOOL ORDERS
1. Tool Model Number. Example: VE416FSD.
2. Tool Description. Example: VE416FSD Roll Grooving Tool.
3. Where to send the tool. Company Name, Address and Telephone Number
4. Attention: Person’s Name
5. Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
C. TOOL RENTAL ORDER
1. A completed and signed tool rental agreement.
2. Purchase Order Number.
3. Tool Model Number. Example: VE272SFS
4. Tool Description. Example: VE272SFS Roll Grooving Tool.
5. Where to send the tool. Company Name, Address and Telephone
6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult victaulic.com for locations.
NOTES:
Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving.
PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116.
Copper/nickel pipe - contact Victaulic for details.
Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets.
Note: Roll grooving tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove
Dimension charts and to ANSI/AWWA C-606 standards.
SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done.
Optional rolls are available at an additional cost.

Terms and Conditions of Tool Rental
TERMS AND CONDITIONS OF TOOL RENTAL

1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation of
pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for
delivery to Lessee.
2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term
of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then
current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1)
year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)
3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon
termination of the lease, or applied to any open invoices on the Lessee’s account, provided Lessee is not in default under any of the term of the lease and has
returned leased property in good condition, less ordinary wear and tear.
4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.
5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without
prior written consent of the Lessor.
6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as
expressly set forth in this Lease.
7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee’s possession and Lessee shall keep
the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the
lessor with a valid sales tax exemption certificate for the state where the tool is delivered.
8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.
9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations
indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until
returned, and Lessor shall also have the right to remove the leased property from Lessee’s premises, without recourse to any legal proceedings.
10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement
tools and/or parts, without cost, upon return of the leased property to Lessor.
11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If
leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the
generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee’s fault or not, Lessee shall
pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current
Victaulic price list for Pipe Preparation tools.
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its
agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of
whatsoever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery,
possession, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding
the termination of this Lease.
13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the
same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions
of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding
against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:
(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the
Lessee.
(b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property.
(c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other
process of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a
termination of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing.
(d) To terminate this lease as to any or all items of leased property.
(e) To pursue any other remedy at law or in equity.
Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all
obligations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental
or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the
Lessee’s obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently
or separately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as
amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors,
or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver
is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property,
the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without
notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in
addition to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or
remedies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors,
administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid,
it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.

Terms and Conditions of Tool Sale
TERMS AND CONDITIONS OF TOOL SALE

Controlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic
products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless
the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.
Minimum Order: $500.00 net for any single order.
Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.
Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $15000 and
over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S.
possessions.
The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of
God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other
cause beyond our control.
Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do
so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances
shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost
profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written
consent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days
of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are
responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company’s agent verify damages,
shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change
product specifications, designs, and standard equipment without notice and without incurring obligation.
WARRANTY
Standard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.

Terms and Conditions of Sale
1.0 TERMS AND CONDITIONS OF SALE

CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer’s purchase order or otherwise shall be valid unless the
alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
TERMS OF PAYMENT: As stated on invoice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $500 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders (excluding No. 26/No. W26 Outlet Fittings, No. 826 Steam Outlet
Fittings, Series 387 Inline/Series 388 End Suction Pump Skids, Customer Specified Flat Beds, Style W257 Dynamic Movement Joints, Bend Elbows – 3D/5D/6D,
Victaulic Bolted Split-Sleeve Products and Victaulic Vortex™ Products) having a net price value of $15000 and over for shipment at one time to one destination into
distributor stock or direct ship to a project, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $15000, F.O.B. shipping point (our option) will be paid by the customer. The most economical
routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or handling that has been requested by the customer,
and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil
disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the requested ship date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall
Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or
liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard
(i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the
right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and
without incurring obligation. For further information contact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the
Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods
Around the world and across diverse business lines, Victaulic provides durable pipe joining solutions that are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have
transportation company’s agent verify damages, shortages or delays and note them on freight bill over his signature.
solve the construction industry’s toughest challenges.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.
Since 1919, Victaulic’s innovative piping products and design services continue to increase construction productivity and
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs, and standard equipment
reduce risk, ensuring projects are completed safely, on time and within budget. without notice and without incurring obligation.
With more than 40 international facilities, Victaulic helps customers in 140 countries succeed in the 2.0 LIMITED WARRANTY
Warranty, Victaulic Contact Information
global construction industry. What is Covered: This warranty covers any defects in materials or workmanship in products sold by Victaulic occurring under normal
conditions of use and service with the exceptions stated below.
How Long Coverage Lasts: This warranty runs for one year from the date of delivery to the original buyer.
FIRE PROTECTION | HVAC | PLUMBING | OIL & GAS | MINING | WATER & WASTEWATER | POWER GENERATION | MARITIME
What is Not Covered: This warranty shall not apply to any product which has been subject to misuse, negligence, or accident (such as, without limitation,
exposure to incompatible chemical or corrosive agents including microbial corrosion), which has been repaired or altered in any manner outside of Victaulic’s factory,
or which has been used in a manner contrary to Victaulic’s instructions or recommendations. This warranty shall not apply to any Victaulic products utilizing
proprietary grooves (such as, but not limited to, the Victaulic AGS™, IGS™, or PGS-300™ grooves) which have been used on pipe that has been grooved to ANSI/AWWA
C-606 standards or which was grooved using tools not supplied by Victaulic or its licensees. Victaulic shall not be responsible for design errors due to
inaccurate or incomplete information supplied by Buyer or its representatives.
What Victaulic will do: Victaulic will repair or replace, at its option, any product that proves to be defective in materials or workmanship following an examination by
Victaulic that shows to its satisfaction the product was defective in materials or workmanship.
THIS LIMITED WARRANTY IS EXCLUSIVE AND MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE
PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of products.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
victaulic.com How to Get Service: Contact Victaulic at 610-559-3300 within one year after delivery to the original buyer to arrange for an examination of the product. You will be
asked to ship the product to Victaulic’s factory, postage and transportation charges prepaid, for examination. There is no charge for examination. Victaulic will examine
the product and contact you within a reasonable time regarding the results of that examination and to arrange for repair or replacement of any product determined
Source: skyscrapercenter.com and the Council on Tall Buildings and Urban Habitat
to be defective in materials or workmanship.
EFFECTIVE JUNE 24, 2022
GENERAL GENERAL
PRICE LIST PRICE LIST
GENERAL PRICE LIST

PL2022-A-GEN
Effective July 1, 2022
Effective July 1, 2022

U.S./WorldHeadquarters EMEAI Asia Pacific
4901 Kesslersville Road Prijkelstraat 36 Unit 808, Building B
Easton, PA 18040 USA 9810 Nazareth, Belgium Hongwell International Plaza
No.1602 West Zhongshan Road
victauliclocations.com Shanghai, China 200235
PL2022-A-GEN 18581 REV A 06/2022

Victaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or
its affiliated entities, in the U.S. and/or other countries. All other trademarks listed herein are the property of their
respective holders, in the U.S. and/or other countries. The terms “Patented” or “Patent Pending” refer to design or
utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.

Catalogo Victaulic Pl2022 A Gen

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Victaulic Pl2022 A Gen

Uploaded by

Copyright:

Available Formats

GENERAL GENERAL

PRICE LIST PRICE LIST

GENERAL PRICE LIST

Effective June 24, 2022

PL2022-A-GEN 18581 REV A 06/2022

1.0 TERMS AND CONDITIONS OF SALE

MINIMUM INVOICE CHARGES: $500 net for any single order.

SECTION 1 – Couplings and Fittings Style DLY

Series W719 Series 968-F-SS

Victaulic Series 973/Bermad Model BC-730-P Series 76T

VICTAULIC.COM PL2022-A-GEN III

Plain End Fittings Style 622

Series 416 VE270FSD

Submitted By:___________________________________ Date:___________________________________

Approved By:____________________________________ Date:___________________________________

VICTAULIC.COM PL2022-A-GEN VII

VIII VICTAULIC.COM PL2022-A-GEN

XII VICTAULIC.COM PL2022-A-GEN

VDG26GD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-24 Terms and Conditions of Sale . . . . . . . . . . . . . . Inside Back Cover

VICTAULIC.COM PL2022-A-GEN XIII

Gasket Selection Guide

XIV VICTAULIC.COM PL2022-A-GEN

VICTAULIC.COM PL2022-A-GEN 1-1

Grooved IPS Pipe Couplings

1-2 VICTAULIC.COM PL2022-A-GEN

QuickVic™ Rigid Coupling

STYLE 107N – GRADE “EHP”, “T”, OR “O” GASKET

NOTE: Items listed in shaded areas are non-cancellable and non-returnable.

VICTAULIC.COM PL2022-A-GEN 1-3

QuickVic™ STYLE 807N – GRADE “P” GASKET

Approx. Wgt. COUPLING COMPLETE

Style 07 Zero-Flex™ Rigid Coupling

Zero-Flex™ STYLE 07 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

1-4 VICTAULIC.COM PL2022-A-GEN

Style L07 Carbon Steel Rigid Coupling

Approx. Wgt. COUPLING COMPLETE With COUPLING COMPLETE With

VICTAULIC.COM PL2022-A-GEN 1-5

1-6 VICTAULIC.COM PL2022-A-GEN

Style LW07 AGS Carbon Steel Rigid Coupling

Approx. Wgt. COUPLING COMPLETE With COUPLING COMPLETE With

VICTAULIC.COM PL2022-A-GEN 1-7

QuickVic™ Flexible STYLE 177N – GRADE “EHP”, “T” OR “O” GASKET

QuickVic™ STYLE 877N – GRADE “P” GASKET

Approx. Wgt. COUPLING COMPLETE

1-8 VICTAULIC.COM PL2022-A-GEN

Standard Coupling STYLE 77 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

VICTAULIC.COM PL2022-A-GEN 1-9

Style L77 Carbon Steel Flexible Coupling

Approx. Wgt. COUPLING COMPLETE With COUPLING COMPLETE With

1-10 VICTAULIC.COM PL2022-A-GEN

VICTAULIC.COM PL2022-A-GEN 1-11

1-12 VICTAULIC.COM PL2022-A-GEN

Flexible Coupling STYLES 75 – GRADE “E” OR “T” GASKET OR FLUSH-SEAL™ GASKET

COUPLING COMPLETE † COUPLING COMPLETE †

Flexible Coupling STYLE 75 – SILICONE GRADE “L” GASKET

Approx. COUPLING COMPLETE † SPARE

VICTAULIC.COM PL2022-A-GEN 1-13

Reducing Coupling STYLE 750 – GRADE “E” OR “T” GASKET

Approx. COUPLING COMPLETE † SPARE

Style 875 Reducing Coupling for Potable Water Applications

Reducing Coupling STYLE 875 – GRADE “P” GASKET

Approx. COUPLING COMPLETE †

1-14 VICTAULIC.COM PL2022-A-GEN

Submitted By:_ Date:_

Approved By:__ Date:_