DESIGN OF ONE WAY SLAB

PANEL NO: S01

Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 10 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 568.84 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 314 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 10 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 568.84 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 314 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 10 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 568.84 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 224.2857 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.331 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < kTc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S02
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < kTc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S03
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S04
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S05
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S06
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S07
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S13
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S14
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION
 DESIGN OF ONE WAY SLAB
PANEL NO: S16
Span (Lx)= 1.53 m
Span (Ly)= 3.835 m
Ly/Lx = 2.51 >2
Therefore, design a one-way slab

Assuming the depth of slab (D) = 115 mm

Effective Depth (d)= 95 mm
Cover ( C )= 15 mm
Assuming dia. Of bar = 10 mm
Grade of Concrete (fck)= 30 N/mm2
Grade of steel (fy)= 500 N/mm2

LOAD ON SLAB(per meter run of slab):

Self weight= 2.875 kN/m
Floor finishes= 1 kN/m
Live load= 3 kN/m
Total load (W)= 6.875 kN/m
Factored load (Wu)= 10.31 kN/m

BENDING MOMENTS:

ULTIMATE MOMENT (Mu+)= 2.01 KN-m

ULTIMATE MOMENT (Mu-)= 2.41 KN-m
SHEAR FORCE (Vu)=WuxLxx0.4= 6.31 KN

CHECK FOR DEPTH:

dreq =√(max B.M)/(0.1338.fck.b)= 24.52 mm
here b= 1m DEPTH PROVIDED IS SUFFICIENT

MAIN REINFORCEMENT :
For negative BM:
Mu = 0.87 fy Ast d [ 1- (Ast fy/bd fck) ]
Ast = [fck*b*d*(1-SQRT[1-((4.598*Mu)/(fck*bd2))]/[2fy]
Ast = 59.02 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

For positive BM:

 Ast = 49.09 mm2 Ast,min= 138.00 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 3d 285 mm (OR)
(3) 300 mm 300 mm
ADOPTING A SPACING OF 250 mm C/C Ast,provided= 200.96 mm2

DISTRIBUTION REINFORCEMENT :

Ast = Ast,min = 0.12%bD

Ast = 138 mm2
USING 8 mm dia bars
Spacing:
(1) S=(1000Xast)/(Ast) 364.06 mm (OR)
(2) 5d 475 mm (OR)
(3) 450 mm 450 mm
ADOPTING A SPACING OF 350 mm C/C Ast,provided= 143.5429 mm
2

CHECK FOR SHEAR:

Tv = Vu/bd 0.0664211 N/mm2
PERCENTAGE OF STEEL (Pt)
(Pt = 100 Ast/bd) 0.212 %
kTc= 0.416 N/mm2 REFERING TABLE-19 OF IS 456-2000
Tc,max 2.8 N/mm2 REFERING TABLE-20 OF IS 456-2000
If Tv < Tc < Tc,max , SAFE IN SHEAR
SAFE IN SHEAR

CHECK FOR DEFLECTION:

(L/αd) < (L/d)basic
(L/d)basic = 32
Modification factor,α = 1.385
(L/αd) = 11.628349
IF (L/αd) < (L/d)basic, THEN SAFE IN DEFLECTION
SAFE IN DEFLECTION