Allen Bradley 800T-Catalog

30mm Push Button
Selection Guide
Time-Tested,
Industry Proven
Innovative Designs. Time-Tested Durability. Reliable Products. These are the

qualities that have made the Rockwell Automation Allen-Bradley brand the industrial
market leader in push buttons. Allen-Bradley offers and supports the largest selection
of 30mm operators in the world.
A Touch Above The Rest. Bold yet functional, rugged yet attractive, we bring the
world’s most innovative and unique push buttons and accessories to the market.
30mm
Push Buttons
and Enclosures…
• Quality
• Design
• Variety
• Reliability
• Value
• Safety
• Delivery
2
Variety. We offer more styles and sizes to
meet the most demanding specifications
in the world’s toughest industrial
environments.
Installation. Time is money. Our push

buttons come pre-assembled and ready to
install right out of the box.
Performance. We set the standard for

performance in applications that demand
rugged, full-sized push buttons.
3
Design Superiority
Allen-Bradley push buttons are in a class by themselves. They are designed and developed
to perform in the most demanding industrial environments.
Diaphragm Seal. Our exclusive, non-lubricated

diaphragm seal provides a blanket of protection by
covering the entire internal body of the push button.
The results are greater reliability and extended
operator life.
The diaphragm seal:
• does not depend on lubrication to maintain
integrity and operating ease.
• will flex without stretching and roll without kinking
while protecting the inside of the operator.
• protects the actuating mechanism from
harmful corrosives and abrasives.
Riveted Construction. Our die

cast operator bushing,
diaphragm seal and base plate
4
are secured together by four
steel rivets. This rugged
construction provides durability
and prevents tampering.
Selector Switches. Functionality, durability, safety and quality.
Allen-Bradley selector switches put the power of logic technology
into manual applications. Available in two, three and four position
units with maintained and spring return combinations.
Variety. With our complete line of 24 different cams and 33

different contact blocks, you no longer need to “jumper” wires
when creating high functionality target arrangements. That’s a
level of target table functionality unmatched in the industry.
Flexibility. Choose from a wide selection of insert colors for

standard knobs and knob levers. Selector switch color inserts are
field interchangeable as are standard knob, knob lever, wing lever
and coin slot operator heads – all for maximum flexibility and
minimum inventory.
Positive Detent. Selector

switches incorporate a patented
safety cam design that creates “positive detent”. Positive detent prevents the
switch from hanging up between two positions. This helps prevent accidents by
reducing the possibility of unwanted changes in contact state.
Emergency Stops. Reliability where it’s needed the

most. Our E-Stops with normally closed late break
contacts comply with EN418 and IEC947-5-5 5
standards. This means that the operator will “latch”
when actuated before the contacts will change state.
Available in 2 or 3 position push-pull or 2 position
push-pull/twist release. Our push-pull/twist to release
operator allows the use of one product to meet
customer requirements worldwide.
Contact Solutions
Allen-Bradley contact blocks offer features and functionality found no where else in the
industry. All products in our 30mm line are designed to utilize the same contact blocks.
There are eight different styles of contact blocks for different applications and environments.
Standard Contact Blocks. These industry

workhorse contact blocks are used most often for pilot
duty applications. We offer two types: single circuit
shallow and double circuit shallow. The contact blocks:
• include self-lifting saddle clamps to make wiring simple. Double
circuit contacts feature offset terminals for ease of wiring.
• are made with pure fine silver contacts to resist corrosion.
• feature a bifurcated spanner providing four different
current paths to increase contact reliability.
• utilize a flexible spanner design for excellent contact
wiping to increase contact reliability and the life of the
contact block. The spanner flexes after contact is
made to minimize contact bounce and consistently clean
the contact surface.
• are enclosed by clear, chemically resistant side plates for
easy contact inspection on open-terminal versions.
Optional Finger Safe (IP2X) versions are color-coded by
circuit type and accept terminal markers for custom
terminal identification.
Sealed Switch Contact Blocks.

An economical solution for Division 2/Zone 2 Hazardous Location
applications. Features a hermetically sealed glass enclosed contact
for reliable switching in highly contaminated and corrosive
environments. Contacts are constructed with tungsten, which has
excellent resistance to welding. Rated for up to 5 amps continuous
current for AC and DC.
Stackable Sealed Switch Contact Blocks. Hermetically sealed contacts
are rated for Division 2/Zone 2 Hazardous Location environments and up to
2.5 amps continuous current for AC and DC. Contact blocks have three
major features:
• IP2X finger safe design.
• Provide more space for applications with limited panel depth.
• Provide up to 8 circuits.
Mini Contact Blocks. When space is an issue, mini
contact blocks are the answer. Offered in a single
circuit that is 1/4" shorter than our standard
shallow contact blocks, mini blocks can be
mounted directly on the operator or
stacked on one level of shallow contact
blocks for a maximum of 6 circuits.
Snap Action And Time Delay Contact Blocks. Snap action contact
blocks can be used in short stroke and rapid response applications or
Logic Reed Contact Blocks. when a high level of tactical feedback is required. Available in either
The perfect solution for reliable low-energy 1 N.O.–1 N.C. or 2 N.O.–2 N.C. contact arrangements for momentary
switching requirements when interfacing with operators only. Time delay contacts use pneumatic pressure to provide a
PLCs and microprocessors. Spanners are delay from the actuated state. Eliminates the need to press two separate
constructed from two inert precious metals to buttons in a short time
withstand corrosion. Contacts are also interval which helps increase
hermetically sealed to keep a dust free response time and
environment and increase contact life. Typical productivity. Available only
contact bounce time is about 1/2 millisecond. as normally open or
Rated for Division 2/Zone 2 Hazardous Location normally closed.
environments.
Self Monitoring™ Contact Blocks –

Enhance E-Stop Reliability
Allen-Bradley’s patented Self MonitoringTM Contact Blocks
(SMCB) offer improved E-Stop reliability for critical process
control applications. The Self Monitoring Contact Blocks
monitor whether or not they are properly installed on the 7
E-Stop operator to help ensure that the normally closed
contacts will open when the E-Stop is actuated.
If the SMCB is separated from the E-Stop operator for any
reason, the controlled circuit will automatically open.
Additional Product Features

• Same ratings as existing 800T shallow
contact blocks respectively
• Color-coded yellow for easy identification
• IP2X finger safe protection
• Terminals identified with IEC style markings
PenTUFF™ – A Low Voltage
PLC Interface Exclusive
Allen-Bradley’s patented, direct drive pentafurcated contacts are revolutionizing the market
for low voltage switching. They feature spanners with five “fingers” on each side of the
spanner for 961 different possible current paths. Each path can carry the
full rated load of the contact.
Pentafurcated contacts:
• feature excellent contact wiping for increased contact reliability and life.
• minimize bounce with the rounded design of the spanner’s “fingers” and the
surface it makes contact with.
• make connections sequentially, with each finger making contact independently.
• feature a spanner made from inert precious metals to resist corrosion, and
flex around debris up to .005 inches.
• are excellent for low voltage applications, with the advantage
of a direct drive mechanism.
Pentafurcated
5-finger spanner
800T MaxDuty™ Copper terminals/spanner

Contact Blocks and silver nickel contacts
to carry higher currents
The 800T MaxDuty™ contact blocks are the

solution to higher-current switching needs.
For use with 800T and 800H 30 mm push
8
buttons, these contacts can switch twice as
Heat resistant
much current as typical “pilot duty” contacts. base is white
In addition, they are also suitable for for easy
identification
starting and stopping small, single-phase
horsepower-rated motors.
Internal view of MaxDuty™ block
MaxDuty contacts can result in:

• Longer electrical life, which means less maintenance/downtime and lower product life-cycle cost.
• Increased safety, as the contacts are less likely to weld.
• Lower Cost, compared to similarly sized contactors, load/cam switches, manual starters, or interposing relays.
Special Purpose Operators
There are hundreds of special purpose operators and accessories available to

complement our extensive product line. For a complete listing, consult your nearest
Allen-Bradley sales office.
Joy Stick. Excellent for

multi-purpose control and
toggling applications.
Available in one, two, three
and four way configurations
with a variety of maintained
and spring return
combinations.
Selector Jog. Combines a

momentary push button with a
two position selector switch.
Ideal for applications where
Mushroom Style Cylinder Lock. A premium offering for panel space is limited.
applications requiring the safety of a mushroom head operator
and the security of a key lock. Place in an emergency stop
application to automatically lock the tripped emergency stop.
Requires a key to restart. Allows for two possible locking
positions and three different locking methods. Potentiometer. Available in
20 different resistive loads,
from 150 ohms to 4 meg
ohms. The operator and
resistive element can be
purchased separately.
Wobble Stick. For

applications requiring a
momentary switch with easy 9
accessibility. It actuates the
contact in any direction and
spring returns to the center. A
Cluster Pilot Lights. The ideal solution when superb solution when the user
panel space is limited. Put two, three, or four indicating lamps in is required to wear gloves or
a single unit. Available in full voltage and transformer power protective equipment.
modules. Lens caps can be assembled in any combination of
red, green, blue, clear, amber, and white.
Enclosures and
Control Stations
Flexibility. Durability. Dependability. These are the characteristics of our enclosures and
control stations, each designed to meet specific industrial requirements. Control stations are
available in custom configurations that are factory assembled free of charge.
800T Enclosures. The industry standard. These durable enclosures are excellent choices for
tough industrial environments. Available in die cast aluminum and sheet metal, we offer surface
mount, flush mount, and pendant station configurations. 800T enclosures are UL/CSA approved
for the ratings listed below.
Pendant Stations
• Heavy gauge sheet
steel construction
Die Cast
• Type 13 oiltight when
• Type 4/13 watertight/oiltight, when
assembled with 800T
assembled with 800T operators
operators
• Available in 1-16 hole configurations
• Includes cable anchor
• Oven-baked gray enamel finish and bushing for ease of
wiring and installation
• Available in 2-10
hole configurations
• Optional wobble stick or
mushroom head E-Stop
in bottom of enclosure
10
Sheet Metal
• Type 13 Oiltight, when
assembled with 800T
operators
• Available in 6-25 hole
configurations
• Oven-baked gray
enamel finish
800H Enclosures. The same strength, dependability and durability as our 800T line, but with
added corrosion resistance. Available in three materials: stainless steel, Rosite (a non-metallic
glass polyester material) and fiberglass. 800H enclosures are UL/CSA approved as Type 4/4X/13
watertight/oiltight/corrosion resistant when assembled with 800H operators.
Rosite
configurations
• Resists the effects of
many corrosive fumes
and liquids
• Low cost alternative
Stainless Steel
configurations
• Provides clean
attractive appearance
Fiberglass
configurations
• Extra deep to
accommodate
Stackable Sealed
Switch or for ease
of wiring
• Outdoor Type 3R
rating available
800R Enclosures. Similar to 800T and 800H enclosures, but enhanced for Division 2/Zone 2
Hazardous Location applications. 800R stations are assembled with 800T/800H operators and our 11
Sealed Switch or Logic Reed contact blocks (below) for performance, reliability and fast delivery.
Can be factory or field assembled for either Type 4/13 or 4/4x/13 environments.
Variety Of Illumination
Choose from the largest selection of nylon lens caps in the industry. Allen-Bradley caps have
superior resistance to breakage and material degradation. Optical enhancements are
molded into lens caps for superior illumination. Colors are available in amber, blue, clear,
green, red, and white.
Power Solutions. Power modules and

lamp options are designed to meet all
your application needs. We offer
several power solutions: full voltage,
resistor, transformer, and dual input.
Lamp types are available in
incandescent, neon, and LED. Full
voltage, resistor and transformer
modules also available in finger safe
versions.
Illumination Options. Table 1 highlights the

variety of lamp types and voltages available.
Incandescent lamps include full voltage,
12
resistor, transformer, and dual input, with
a voltage range from 6V to 600V. Neon
lamps are available in 120V and 240V.
LED lamps are available in full
voltage, transformer, and dual
input from 6V to 600V.
Illumination Performance. Table 2 defines the
advantages of specific lamps and power modules
based on cost and working environment.
• Incandescent lamps have the widest selection of
colors, the highest level of illumination and are the
most economical.
• Neon lamps provide excellent resistance to shock
and vibration. Cost effective with extended lamp life,
neon lamps are available only with clear and amber
lens caps.
• LED lamps offer the greatest value by
providing the longest lamp life and the
best resistance to shock and vibration.
In addition, they have an
internal shunt resistor for
use with solid state
outputs. They last up to
100,000 hours. That’s
over 11 years of usage,
24 hours a day!
Illuminated Operators. We offer a

complete line of illuminated operators
featuring superior sealing, illumination
and environmental protection. Illuminated
operators offer two way communication–
push buttons send signals through
illumination and receive signals through
the operator function.
13
Accessories Protective Boots. Protect your
operators from liquids, foreign
materials and most corrosive
elements. Available in four
materials: hypalon, silicone,
urethane, and ethylene propylene.
Finger Safe Terminal Guards.
Add personal protection from direct
voltage at contact terminals.
Terminal guards comply with
Legend Plates. Label operators with our wide variety of
IEC IP2X standards,
legend plates. Choose from commonly used standard
and are available
text, specify custom text or
in single-terminal,
order blank. Available
multi-terminal, and
in several different
transformer versions. All
sizes and colors.
guards can be purchased
as accessories or pre-assembled
on operators.
Guard Rings. Protect operators

from accidental actuation. Kit
includes a mounting ring and a
guard. The guards are available
in plastic or metal, depending
upon the type of protection
required. Can be mounted
on illuminated and
Deflection Guards. Protect your operator from heavy
non-illuminated
impact. Fits standard size mushroom head operators.
push buttons.
Constructed from rugged extruded aluminum and
provides visible indication of illuminated devices.
14
Locking Attachments. Having the broadest accessory offering in the business means Allen-Bradley can provide the
solution for our customer’s specific application needs. Locking attachments are available for momentary mushroom
heads, selector switches, push-pull operators, extended head and flush head operators.
Bulletin 800
30.5 mm Push Buttons
1
Table of Contents
Bulletin 800T/H Push Buttons

• 30.5 mm Mounting Hole
• Type 4/13 Watertight/Oiltight
• Heavy Industrial Stations and Operators Page 17
Bulletin 800R Push Button Stations

• 30.5 mm Mounting Hole
• Types 4/13 and 4/4X/13 Hazardous
Locations
• Classes I and II, Division 2 Page 79
Bulletin 800T Small Pilot Lights

• 18 mm Mounting Hole
• Type 4/13 Watertight/Oiltight
• Small Pilot Lights Page 85
15
Bulletin 800
Notes
16
Bulletin 800T/800H
Overview/Specifications
Bulletin 800T/800H 30.5 mm Push Buttons Table of Contents

• 30.5 mm Mounting Hole Specifications . . . . . . . . . . .17
• Type 4/13 Watertight/Oiltight (800T) Product Selection . . . . . . . .19
• Type 4/4X/13 Corrosion-Resistant/Watertight/Oiltight (800H) Modifications and
• Heavy Industrial Stations and Operators Accessories . . . . . . . . . . . . .46
Approx. Dimensions . . . . . .65
Certifications
• UL Listed —
File: E14840, E10314,
Guide: NKCR, NOIV
• CSA Certified:
LR1234, LR11924
• CE Compliant
IEC: 60947-5-1
Specifications ➊
Electrical Ratings
Contact ratings Refer to the contact ratings tables below.
Dielectric strength 2200V for one minute, 1300V for one minute (Logic Reed)
Electrical design life cycles 1,000,000 at max. rated load, 200,000 at max. rated load (Logic Reed)
Mechanical Ratings
Vibration 10…2000 Hz 1.52 mm displacement (peak-to-peak) max./10 G max. (except Logic Reed)
Shock 1/2 cycle sine wave for 11 ms ≥ 25 G (contact fragility) and no damage at 100 G
Degree of protection Type 1/4/12/13 (800T); Type 1/4/4X/12/13 (800H); IEC 529 IP66/65
Mechanical design life cycles
(Momentary, non-illuminated) 10,000,000 min.
Push buttons (Momentary, illuminated) 250,000 min.
(Push-pull/twist-to-release) 250,000 min.
(Non-illuminated) 1,000,000 min.
Selector switches
(Illuminated, key-operated) 200,000 min.
Potentiometers 100,000 min.
All other devices 200,000 min.
Shallow, mini, and low voltage contact blocks: Slow, double make and break
Contact operation
Logic Reed and sealed switch contact blocks: Single break magnetic
Wire guage/Terminal screw torque #18-12 AWG/6…8 lb-in
Typical operating forces
Flush, extended, standard mushroom, jumbo plastic mushroom button: 2 lbs max.
Operators without contact blocks Jumbo and extended aluminum mushroom head: 3.95 lbs max.
Maintained selector switch: 3.6 in. lbs max.
Spring return selector switches 3.6 in.-lbs to stop, 0.2 in.-lbs to return
Illuminated push buttons and push-to-test pilot lights 5 lbs max.
2-position push-pull 7.5 lbs max. push or pull
3-position push-pull 8 lbs max. push to in position or pull to center position (15 lbs max. pull to out position)
Twist-to-release or push-pull 9 lbs max. push or pull 30 in. oz. max. twist, 6 in. oz. minimum return
Potentiometer Rotational torque 3…12 in.-oz.; stopping torque 12 in.-lbs (minimum)
Standard 1 lb
Contact blocks Logic Reed 1 lb max.
Sealed switch 3 lbs max. at 0.205" plunger travel
Stackable sealed switch 1 lb max.
Environment
Operating –40…+131°F (–40…+55°C)
Temperature range
Storage –40…+185°F (–40…+85°C)
Note: Operating temperatures below freezing are based on the
absence of moisture and liquids. Consult your local Allen-Bradley
Sales Office for use in lower temperature applications.
Humidity 50% at +104°F (+40°C)
➊ Performance Data — See Industrial Controls Catalog, page Important-2.
17
Bulletin 800T/800H
Specifications, Continued
Standard Contact Ratings PenTUFF  (Low Voltage) Contact Ratings

Maximum thermal continuous current Ith 10 A AC/2.5 A DC. Bulletin 800T Minimum DC: 5V, 1 mA
units with 800T-XA contacts have ratings as follows: Maximum thermal continuous current Ith 2.5 A AC/1.0 A DC. Bulletin 800T
Max. Opertnl. Utilization Category Rated Operational Currents units with 800T-XAV contacts have ratings as follows:
Volts Ue IEC NEMA Volts Ue Make Break Max. Opertnl. Utilization Category Rated Operational Currents
120…600 7200 VA 720 VA Volts Ue IEC NEMA Volts Ue Make Break
AC 600 AC-15 A600 72…120 60 A 720 VA 120…300 1800 VA 180 VA
24…72 60 A 10 A AC 300 AC-15 C300
0…120 15 A 1.5 A
28…600 69 VA 24…150 28 VA
DC 600 DC-13 Q600 DC 150 DC-13 R150
24…28 ➊ 2.5 A 0…24 1.0 A
➊ For applications below 24V/24 mA, PenTUFF  or Logic Reed contacts are
recommended. Snap Action Contact Ratings
Sealed Switch Contact Ratings Max. Opertnl. Contact Rating Rated Operational Currents
Volts Ue Designation Volts Ue Make Break
Maximum continuous current Ith 5 A. Bulletin 800T units have control circuit
120…300 7200 VA 720 VA
ratings with sealed switch contact blocks as follows: AC 300 A300
24…72 60 A 10 A
Max. Opertnl. Utilization Category Rated Operational Currents 230…250 0.2 A
DC 250 —
Volts Ue IEC NEMA Volts Ue Make Break 115…125 0.4 A
120…600 3600 VA 360 VA
AC 600 AC-15 B600 MaxDuty Contact Rating
0…120 30 A 3A
24…300 138 VA Maximum thermal continuous current Ith 24 A.
DC 300 DC-13 P300
0…24 5.0 A Pilot Duty — 120V AC, 12 A; 24V DC
Motor Ratings — 120V AC, 1.5 Hp; 240V AC, 3 Hp; 24V DC, 10A FLA/60 A
Stackable Sealed Switch Contact Ratings
LRA
Maximum continuous current Ith 2.5 A. Bulletin 800T units have control circuit
ratings with sealed switch contact blocks as follows: Time Delay Contacts
Max. Opertnl. Contact Rating Rated Operational Currents
Max. Oprtnl. Utilization Category Rated Operational Currents
Volts Ue Designation Volts Ue Make Break
Volts Ue IEC NEMA Volts Ue Make Break
AC 120 B150 120 3600 VA 360 VA
120…300 1800 VA 180 VA
AC 300 AC-15 C300
0…120 15 A 1.5 A Note: This device is not rated for DC applications.
DC 150 DC-13 Q150
24…150 69 VA Adjustment range: 0.5…15 s ± 25% Ith = 5 A
0…24 2.5 A
Logic Reed Contact Ratings
Minumum — DC: 5V, 1 mA
Maximum — DC: 30V, 0.06 A, AC: 150V, 0.15 A
Should only be used with resistive loads.
Materials Used in 800H Type 4X Operators

Thermoplastic Polyester (Fiberglass Reinforced)
• Bushings
• Mounting rings
• Sockets
Thermoplastic Polyester
• Non-illuminated button caps
Transparent Amorphous Nylon
• Pilot light lens cap
• Illuminated button caps
Glass Filled Crystalline Nylon
• Thrust washer
Mineral Filled Nylon
• Trim washer
Nitrile (Synthetic Rubber)
• Gaskets and internal seals
18
Bulletin 800T/800H
Assembled Stations
Die Cast Aluminum Booted Operator – Stainless Steel Booted Operator – Glass Polyester
Cat. No. 800T-2TAR Cat. No. 800H-1HA4T Cat. No. 800H-1HA4R
Type 4/13 Type 4/4X/13

Contact Contact Button Button Die Cast Booted Operator Booted Operator
Operator Legend Marking
Symbol Action Type Color Aluminum – Stainless Steel – Glass Polyester
Cat. No. Cat. No. ➊ Cat. No. ➊
Momentary Extended Red STOP 800T-1TA 800H-1HA4T 800H-1HA4R
One 1 N.O. -
Push Momentary Flush Green START 800T-1TB 800H-1HB4T 800H-1HB4R
1 N.C.
Button Momentary Flush Black No Legend 800T-1TX 800H-1HX4T 800H-1HX4R
Flush Green START
Momentary 800T-2TA 800H-2HA4T 800H-2HA4R
Two 1 N.O. - Extended Red STOP
Push 1 N.C.
Buttons Each Flush Black
Momentary No Legends 800T-2TX 800H-2HX4T 800H-2HX4R
Button Flush Black
120V AC Red No Legend

Red Momentary Flush Green START 800T-2TAR 800H-2HAR4T 800H-2HAR4R
One
Extended Red STOP
Pilot Light 1 N.O. -
Two Push 1 N.C. 120V AC Red
Buttons Each Momentary Flush Black No Legends 800T-2TXR 800H-2HXR4T 800H-2HXR4R
Button Flush Black
Black with
3-Position Maintained Knob Lever HAND OFF AUTO 800T-R3TA — —
1 N.O. - white insert
Selector 1 N.C.
Switch Black with
Maintained Knob Lever No Legend 800T-R3TX — —
white insert
One Push Push-Pull/ EMERG

1 N.C.L.B. Maintained Red 800T-1TYM ➋ — —
Button Twist STOP
Flush Green START

Maintained 800T-2TAM 800H-2HAM4T 800H-2HAM4R
1 N.O. - Extended Red STOP
Two Push
Buttons 1 N.C. Flush Black
Maintained No Legends 800T-2TXM 800H-2HXM4T 800H-2HXM4R
Flush Black
➊ Boot material is hypalon with brass threaded-insert. For added corrosion resistance, specify Bulletin 800HS for booted push buttons with stainless steel inserts. Add
suffix L to the cat. no. for station with bootless operators. Example: Cat. No. 800H-1HB4TL.
➋ Supplied with yellow legend plate to comply with IEC60947-5-5 and NFPA79 E-Stop standards that require yellow background.
19
Bulletin 800T/800H
Emergency Stop Operators
2-Position Push-Pull and Push-Pull/Twist Release, Non-Illuminated
Note: A jumbo or large legend plate is recommended, if space allows.
2-Position Push-Pull 2-Position Push-Pull/Twist 2-Position Push-Pull/Twist

Cat. No. 800T-FX6D4 Cat. No. 800T-FXT6D4 Cat. No. 800H-FRXT6D4
Operator Position Type 4/13 Type 4/4X/13
Contact Button Push-Pull/Twist Push-Pull/Twist

Push-Pull
Type Color Release Release
Maintained Maintained
Out In Cat. No. Cat. No. Cat. No.
N.C.L.B. ➊ X O Red 800T-FX6D4 800T-FXT6D4 800H-FRXT6D4
N.O. - O X
Red 800T-FX6A1 800T-FXT6A1 800H-FRXT6A1
N.C.L.B. ➊ X O
N.C.L.B. - X O
Red 800T-FX6A5 800T-FXT6A5 800H-FRXT6A5
N.C.L.B. ➊ X O
S.M.C.B. ➊➋
X O Red 800TC-FX6D4S 800TC-FXT6D4S 800HC-FRXT6D4S
N.O. - O X
Red 800TC-FX6A1S 800TC-FXT6A1S 800HC-FRXT6A1S
S.M.C.B. ➊➋ X O
S.M.C.B. - X O
Red 800TC-FX6A5S 800TC-FXT6A5S 800HC-FRXT6A5S
S.M.C.B. ➊➋ X O
Note: X = Closed/O = Open

Note: Emergency stop push buttons are compliant with EN-418 and IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
➊ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts
change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➋ The Self Monitoring Contact Block (S.M.C.B.) is composed of a N.C.L.B. contact wired in series with a N.O. monitoring contact. The N.O. monitoring contact
automatically closes when the S.M.C.B. is properly installed onto the E-stop operator. If the S.M.C.B. is separated from the E-stop operator, the N.O. monitoring
contact will automatically open.
Accessories — Page 46 Approximate Dimensions — Page 65

Legend Plates — Page 59
20
Bulletin 800T/800H
Emergency Stop Operators, Continued
2-Position Push-Pull and Push-Pull/Twist Release Units, Illuminated
Illuminated 2-Position Push-Pull Illuminated 2-Position Push-Pull/Twist Illuminated 2-Position Push-Pull/Twist

Cat. No. 800T-FXP16RA1 Cat. No. 800T-FXTP16RA1 Cat. No. 800H-FRXTP16RA1
Push-Pull Push-Pull/Twist Push-Pull/Twist

Type Lamp Volts Color
Release Release Release
Maintained
Maintained
Contacts Out In Cat. No. Cat. No. Cat. No.
Incandescent 24 AC/DC N.O. - 800T-FXQ24RA1 800T-FXTQ24RA1 800H-FRXTQ24RA1
O X
Full Voltage 120 AC Red N.C.L.B. 800T-FXQH10RA1 800T-FXTQH10RA1 800H-FRXTQH10RA1
LED X O
24 AC/DC ➊➋ 800T-FXQH24RA1 800T-FXTQH24RA1 800H-FRXTQH24RA1
120 AC 800T-FXP16RA1 800T-FXTP16RA1 800H-FRXTP16RA1
Incandescent N.O. -
240 AC O X 800T-FXP26RA1 800T-FXTP26RA1 800H-FRXTP26RA1
Transformer Red N.C.L.B.
120 AC X O 800T-FXPH16RA1 800T-FXTPH16RA1 800H-FRXTPH16RA1
LED ➊➋
240 AC 800T-FXPH26RA1 800T-FXTPH26RA1 800H-FRXTPH26RA1

Note: Emergency stop push buttons are compliant with EN-418 and IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
➋ Consult your local Allen-Bradley sales office for availability of illuminated E-stops with Self Monitoring Contact Blocks (S.M.C.B.s).

21
Bulletin 800T/800H
Push Button Operators
Momentary Contact Push Button Units, Non-Illuminated
Flush Head Unit Extended Head Unit Booted Unit Bootless Flush Head Unit
Cat. No. 800T-A1A Cat. No. 800T-B6A Cat. No. 800H-R2A Cat. No. 800H-AR1A
Bootless
Contact Type Button Color Flush Head Extended Head Booted ➊
Flush Head
Cat. No. Cat. No. Cat. No. Cat. No.
Green 800T-A1 800T-B1 800H-R1 800H-AR1
No Contact Black 800T-A2 800T-B2 800H-R2 800H-AR2
Red 800T-A6 800T-B6 800H-R6 800H-AR6
Green 800T-A1D1 800T-B1D1 800H-R1D1 800H-AR1D1
1 N.O. Black 800T-A2D1 800T-B2D1 800H-R2D1 800H-AR2D1
Red 800T-A6D1 800T-B6D1 800H-R6D1 800H-AR6D1
Green 800T-A1D2 800T-B1D2 800H-R1D2 800H-AR1D2
1 N.C. Black 800T-A2D2 800T-B2D2 800H-R2D2 800H-AR2D2
Red 800T-A6D2 800T-B6D2 800H-R6D2 800H-AR6D2
Green 800T-A1A 800T-B1A 800H-R1A 800H-AR1A
1 N.O. - 1 N.C. Black 800T-A2A 800T-B2A 800H-R2A 800H-AR2A
Red 800T-A6A 800T-B6A 800H-R6A 800H-AR6A
800 T – A 1 A
a b c d e f
a d (cont’d) f (cont’d) f (cont’d)

Protection Rating Color Cap Contact Block(s) Contact Block(s)
Code Description Code Description Code Description Code Description
T Metal, Type 4/13 6 Red Blank No Contacts on operator Blank No Contacts on operator
H Plastic, Type 4/4X/13 7 Blue PenTUFF (Low Voltage) Class 1, Div. 2/Zone 2
9 Yellow D1V 1 N.O. Sealed Switch
b
D2V 1 N.C.
Finger-Safe Guards
e D1P 1 N.O.
D3V 1 N.O.E.M. D2P 1 N.C.
Code Description Special Mushroom Head D4V 1 N.C.L.B. A2P 2 N.O.
Blank No Guards Code Description AV 1 N.O. - 1 N.C. A4P 2 N.C.
C Guards on Terminals Blank No Special Head BV 2 N.O. - 2 N.C. AP 1 N.O. - 1 N.C.
J Jumbo Mushroom Head—Plastic ➍ Time Delay BP 2 N.O. - 2 N.C
c L Jumbo Mushroom Head—Metal ➍
T
1 N.O. Stackable Sealed Switch
Operator Type Note: Special Mushroom Head options Depress close, delayed opening D1Y 1 N.O.
800T 800H only apply to Mushroom Head operator 1 N.C. D2Y 1 N.C.
S
Type Type Type Code D/DR. Depress open, delayed closure
Description A2Y 2 N.O.
4/13 4/4X/13 Snap Action
Code Code
f M 1 N.O. - 1 N.C.
A4Y 2 N.C.
AY 1 N.O. - 1 N.C.
A Flush Head AR Contact Block(s) N 2 N.O. - 2 N.C. BY 2 N.O. - 2 N.C
B Extended Head BR Code Description Class 1, Div. 2/Zone 2
D Mushroom Head DR Blank No Contacts on operator Logic Reed Time Delay Contacts
Mushroom Head Standard D1R 1 N.O.
DX DRX Series C field installable kits can only be
less Color Cap
D1 1 N.O. D2R 1 N.C. used with Series T or later
Bootless Guarded
—
Head
GR D2 1 N.C. A2R 2 N.O. ➌ operators. Adjustable range of 0.5
D3 1 N.O.E.M. A4R 2 N.C. to 15 s + 25%. Maximum
— Booted Head R➊
D4 1 N.C.L.B. AR 1 N.O. - 1 N.C. continuous current Ith 5 A.
d D5 1 N.O. (Mini) BR 2 N.O. - 2 N.C.
D6 1 N.C. (Mini) Snap Action Contacts
Color Cap
A1 1 N.C.L.B. - 1 N.O. Snap action contacts feature a quick
Code Description
A2 2 N.O. ➌ make, quick break snap-action
Used only when ordering mechanism that is only available
Blank A4 2 N.C.
Operator Type DX/DRX on factory assembled units.
1 Green A7 1 N.C.L.B. - 1 N.C.
Maximum continuous current
2 Black A 1 N.O. - 1 N.C.
Ith 10 A.
3 Orange ➋ B 2 N.O. - 2 N.C.
4 Gray ➋
5 White ➋
➊ Underlying operators are "flush head" type, except red which are "extended head." Boot material is hypalon with brass threaded-insert. See page 51 for additional boot materials.
➋ Not available for booted operators.
➌ A2 and A2R contact blocks cannot be stacked upon, but can stack on other contact blocks.
➍ Jumbo Mushroom heads are not available in white.

22
Bulletin 800T/800H
Push Button Operators, Continued
Momentary Contact Push Button Units, Illuminated
Extended Head Without Guard Extended Head With Guard Extended Head without Guard Extended Head with Guard
Cat. No. 800T-PB16R Cat. No. 800T-PA16R Cat. No. 800H-PRB16R Cat. No. 800H-PRA16R

Extended Head Extended Head Extended Head Extended Head
Type Lamp Volts Color
Without Guard ➊ With Guard ➊ without Guard ➊ with Guard ➊
Operator Only (supplied without power module, lamp, lens cap, or contact blocks) 800T-SB00XX 800T-SA00XX 800H-SRB00XX 800H-SRA00XX
Red 800T-QB24R 800T-QA24R 800H-QRB24R 800H-QRA24R
Incandescent 24 AC/DC Green 800T-QB24G 800T-QA24G 800H-QRB24G 800H-QRA24G
Amber 800T-QB24A 800T-QA24A 800H-QRB24A 800H-QRA24A
Red 800T-QBH10R 800T-QAH10R 800H-QRBH10R 800H-QRAH10R
120 AC Green 800T-QBH10G 800T-QAH10G 800H-QRBH10G 800H-QRAH10G
Amber 800T-QBH10A 800T-QAH10A 800H-QRBH10A 800H-QRAH10A
Full Voltage LED
Red 800T-QBH24R 800T-QAH24R 800H-QRBH24R 800H-QRAH24R
24 AC/DC Green 800T-QBH24G 800T-QAH24G 800H-QRBH24G 800H-QRAH24G
Amber 800T-QBH24A 800T-QAH24A 800H-QRBH24A 800H-QRAH24A
No Lamp 0…250 AC/DC No Lens 800T-QBN25 800T-QAN25 800H-QRBN25 800H-QRAN25
Red 800T-PB16R 800T-PA16R 800H-PRB16R 800H-PRA16R
Incandescent Green 800T-PB16G 800T-PA16G 800H-PRB16G 800H-PRA16G
Amber 800T-PB16A 800T-PA16A 800H-PRB16A 800H-PRA16A
120 AC Red 800T-PBH16R 800T-PAH16R 800H-PRBH16R 800H-PRAH16R
Transformer
LED 50/60 Hz Green 800T-PBH16G 800T-PAH16G 800H-PRBH16G 800H-PRAH16G
Amber 800T-PBH16A 800T-PAH16A 800H-PRBH16A 800H-PRAH16A
No Lamp No Lens 800T-PBN16 800T-PAN16 800H-PRBN16 800H-PRAN16
➊ Includes one standard 800T-XA (1 N.O. - 1 N.C.) contact block.
a
800 T – P B H 16 R
a b c d e f g h
a e f (cont’d) AC/DC and internal shunt resistor,

order 130V AC/DC LED (Code 13).
Protection Rating Illumination Options Voltage - Full
Code Description Transformer/Full Voltage Code Description
g (cont’d)
T Metal, Type 4/13 Code Description 06 6V AC/DC Lens Color
H Plastic, Type 4/4X/13 Blank Incandescent 12 12V AC/DC Code Color
b H LED ➋ 24 24V AC/DC W White
Resistor/Neon 32 32V AC/DC ➍
Finger-Safe Guards Blank No Options 48 48V AC/DC h
Code Description Dual Input 10 120V AC/DC ➎ Contact Block(s)
Blank No Guards D Diode Type ➌ 13 130V AC/DC ➍ Code Description
C Guards on Terminals Diode Type LED ➋➌
DH 20 240V AC/DC ➍ X No Contact Blocks
c T Transformer — Relay Type Resistor Standard
TH Transformer — Relay Type LED ➋ 11 120V AC/DCResistor Blank 1 N.O. - 1 N.C.
Power Module Type
800T Type
800H f Neon D1 1 N.O.
Type 10 120V AC/DC D2 1 N.C.
4/13 Description 4/4X/13 Voltage - Transformer 20 240V AC/DC PenTUFF (Low Voltage)
Code Code Code Description Dual Input D1V 1 N.O.
Transformer 36 48V AC 50/60 Hz 16 120V AC D2V 1 N.C.
P PR
(or Dual Input) 16 120V AC 50/60 Hz 24 24V AC/DC (dual input diode only) AV 1 N.O. - 1 N.C.
Full Voltage 26 240V AC 50/60 Hz Class 1, Div. 2/Zone 2 Logic Reed
Q QR
(or Resistor) 76 277V AC 50/60 Hz g D1R 1 N.O.
Neon (only 46 480V AC 50/60 Hz
R
amber or clear)
RR Lens Color D2R 1 N.C.
56 600V AC 50/60 Hz AR 1 N.O. - 1 N.C.
Code Color
d ➋ LEDs available in red, green, No Lens with standard contacts Sealed Switch
Blank
amber, blue, and white. White LEDs 1 N.O. - 1 N.C. D1P 1 N.O.
Head Type only available in 6V, 24V, 120V, and No Lens if ordering contacts other D2P 1 N.C.
Code Description 130V full voltage and all transformer X
than standard 1 N.O. - 1 N.C. AP 1 N.O. - 1 N.C.
A Extended Head with Guard units. LED color matches lens color, A Amber
Extended Head except clear lens supplied with Stackable Sealed Switch
B white LED and white lens supplied B Blue
without Guard D1Y 1 N.O.
with amber LED. All LEDs except C Clear
M Mushroom D2Y 1 N.C.
120V have an internal shunt resistor G Green
MJ Jumbo Mushroom for use with solid-state outputs. AY 1 N.O. - 1 N.C.
R Red
➌ Diode type dual input provides
circuit isolation via opposing ➍ 32V and 130V are LED only. 240V
diodes. Not recommended for use is incandescent only.
with solid-state outputs and neon ➎ 120V LED is AC only and does not
indicators. contain internal shunt resistor. For
23
Bulletin 800T/800H
Selector Switches
2-Position Selector Switch Units, Non-Illuminated
Standard Knob Operator Knob Lever Operator Standard Knob Operator

Cat. No. 800T-H2A Cat. No. 800T-H17A Cat. No. 800H-HR2A
Operator Type 4/13 Type 4/4X/13

Position Operator Type Standard Knob Knob Lever Standard Knob
Contact
Side Contact M = Maintained
Type
S = Spring Return Cat. No. Cat. No. Cat. No.
M M 800T-H2 800T-H17 800H-HR2

No Contacts — — — — S→M 800T-H4 800T-H18 800H-HR4
M←S 800T-H5 800T-H19 800H-HR5
M M 800T-H2D1 800T-H17D1 800H-HR2D1
1 N.O. White A O X S→M ➊ 800T-H4D1 800T-H18D1 800H-HR4D1
M←S 800T-H5D1 800T-H19D1 800H-HR5D1
M M 800T-H2A 800T-H17A 800H-HR2A
1 N.O. - A O X
1 N.C. White S→M ➊ 800T-H4A 800T-H18A 800H-HR4A
B X O
M←S 800T-H5A 800T-H19A 800H-HR5A
➊ Target tables are reversed from those shown.
800 T – HA 2 A
a b c d e
a d e
Protection Rating Operator Type and Function Contact Block(s)
Code Description Description
Standard Knob
2-Position
T Metal, Type 4/13 Code Operator Function
H Plastic, Type 4/4X/13 Code Contact
2 Maintained
Configuration
b 4 Spring Return From Left ➌
5 Spring Return From Right
Finger-Safe Guards No Contacts on
Knob Lever ➍ Blank
operator
— —
Code Description Code Operator Function Standard
Blank No Guards 17 Maintained D1 1 N.O. O X
C Guards on Terminals 18 Spring Return From Left ➌ D2 1 N.C. X O
c 19 Spring Return From Right
A 1 N.O. - 1 N.C.
O X
Metal Wing Lever ➍ X O
Knob Insert Colors Code Operator Function O X
800T 800H X O
11 Maintained B 2 N.O. - 2 N.C.
Type 4/13 Description Type 4/4X/13 O X
15 Spring Return From Left ➌
Code Code X O
16 Spring Return From Right
H White HR Max Duty (Horsepower Rated) ➎
HA Red HRA
Coin Slot ➍
D1M 1 N.O.
HB Green HRB Code Operator Function
D2M 1 N.C.
6 Maintained
HC Blue HRC PenTUFF (Low Voltage) ➎
HE Yellow HRE 7 Spring Return From Left
D1V 1 N.O.
HF Orange HRF 8 Spring Return From Right D2V 1 N.C.
HX Packet of Colored Inserts ➋ HRX AV 1 N.O. - 1 N.C.
Metal Wing Lever Colors ➍ BV 2 N.O. - 2 N.C.
Code Color Code Class1, Div. 2/Zone 2
HA Red — Logic Reed ➎
HG Gray — D1R 1 N.O.
D2R 1 N.C.
AR 1 N.O. - 1 N.C.
➋ Packet of colored inserts, one of each color. BR 2 N.O. - 2 N.C.
➌ Target tables are reversed from those shown. Sealed Switch ➎
➍ Only available on 800T, Type 4/13 operators. D1P 1 N.O.
➎ Contact target tables same as those listed for D2P 1 N.C.
standard contact blocks. AP 1 N.O. - 1 N.C.
BP 2 N.O. - 2 N.C.
Stackable Sealed Switch ➎
D1Y 1 N.O.
D2Y 1 N.C.
AY 1 N.O. - 1 N.C.
BY 2 N.O. - 2 N.C.
24
Bulletin 800T/800H
Selector Switches, Continued
2-Position Selector Switch Units, Non-Illuminated (800T only)
2-Position Cylinder Lock Operator

Cat. No. 800T-H33A
Type 4/13
Operator
Cylinder Lock ➎
Position Operator Type
Contact
Side Contact M = Maintained Key Removal — Left ➋ Key Removal — Right ➋ Key Removal — Both ➋
Type
S = Spring Return
Cat. No. Cat. No. Cat. No.
M M 800T-H31 800T-H32 800T-H33

No Contacts — — — —
M←S 800T-H48 — —
M M 800T-H31D1 800T-H32D1 800T-H33D1
1 N.O. White A O X S→M ➊ — 800T-H42D1 —
M←S 800T-H48D1 — —
M M 800T-H31A 800T-H32A 800T-H33A
1 N.O. - A O X
1 N.C. White S→M ➊ — 800T-H42A —
B X O
M←S 800T-H48A — —
➊ Target tables are reversed from those shown.
➋ Keys removable from maintained positions only.
800 T – H31 A
a b c d e
a d e
Protection Rating Key Options for Cylinder Locks ➎ Contact Block(s)
Description
Code Description D Series T Series
Code Code 2-Position
T Metal, Type 4/13 Key No. Key No.
D018 Code Contact
b Blank
(Std. Key)
15 T112 Configuration
Finger-Safe Guards 03 D020 16 T115
04 D025 17 T324 No Contacts on
Code Description Blank — —
05 D335 18 T382 operator
Blank No Guards
06 D429 19 T404 Standard
C Guards on Terminals
07 D461 20 T171 D1 1 N.O. O X
c 08 D111 21 T484 D2 1 N.C. X O
09 D587 22 T547 O X
Key Removal Position A 1 N.O. - 1 N.C.
X O
10 D682 23 T569
Maintained O X
11 D713 24 T692
Code Operator Function X O
12 D900 25 T752 B 2 N.O. - 2 N.C.
H31 Key Removal — Left O X
13 D992 26 T178 X O
H32 Key Removal — Right
14 D118 — — Max Duty (Horsepower Rated)
H33 Key Removal — Both
Spring Return From Left D1M 1 N.O.
Code Operator Function D2M 1 N.C.
H42 Key Removal — Right ➌ PenTUFF (Low Voltage)
D1V 1 N.O.
Spring Return From Right
D2V 1 N.C.
Code Operator Function
AV 1 N.O. - 1 N.C.
H48 Key Removal — Left BV 2 N.O. - 2 N.C.
Class1, Div. 2/Zone 2
➌ Target tables are reversed from those shown. Logic Reed ➍
➍ Contact target tables same as those listed for D1R 1 N.O.
standard and PenTUFF contact blocks. D2R 1 N.C.
➎ Device supplied with 2 keys. Replacement key part AR 1 N.O. - 1 N.C.
number for standard D018 key is x-181170. See BR 2 N.O. - 2 N.C.
Accessories section for additional replacement Sealed Switch ➍
key numbers. D1P 1 N.O.
D2P 1 N.C.
AP 1 N.O. - 1 N.C.
BP 2 N.O. - 2 N.C.
Stackable Sealed Switch ➍
D1Y 1 N.O.
D2Y 1 N.C.
AY 1 N.O. - 1 N.C.
BY 2 N.O. - 2 N.C.
Accessories — Page 46
Legend Plates — Page 59 Approximate Dimensions — Page 65
25
Bulletin 800T/800H

Cat. No. 800T-J2A Cat. No. 800T-J17A Cat. No. 800H-JR2A

Operator Position Operator Type
Contact Standard Knob Knob Lever Standard Knob
M = Maintained
Type
M M M 800T-J2 800T-J17 800H-JR2

No S→M M 800T-J4 800T-J18 800H-JR4
— — —
Contacts M M←S 800T-J5 800T-J19 800H-JR5
S→M←S 800T-J91 800T-J20 800H-JR91
M M M 800T-J2A 800T-J17A 800H-JR2A
O O X S→M M 800T-J4A 800T-J18A 800H-JR4A
X O O M M←S 800T-J5A 800T-J19A 800H-JR5A
1 N.O. -
1 N.C. S→M←S 800T-J91A 800T-J20A 800H-JR91A
800 T – J 2 C
a b c d e f
a d e (cont’d) f (cont’d)
Protection Rating Knob/Lever Type Operators Cam Option ➌ Contact Blocks
Code Description Standard Knob Code Description Code Description
T Metal, Type 4/13 Code Operator Function KC1 KC1 Cam
Class 1, Div. 2/Zone 2
H Plastic, Type 4/4X/13 2 Maintained KC7 KC7 Cam
KD7 KD7 Cam
Logic Reed
4 Spring Return from Left
b 5 Spring Return from Right KE7 ➍ KE7 Cam AR
1 N.O. - 1 N.C.
1-800T-XAR on white side
91 Spring Return from Both KQ1 KQ1 Cam
Finger-Safe Guards 2 N.O. - 2 N.C.
Code Description Knob Lever ➋ KQ7 KQ7 Cam
BR 2-800T-XARs —
Code Operator Function KR1 ➍ KR1 Cam
Blank No Guards 1 on white side/1 on black side
17 Maintained KR7 ➍ KR7 Cam
C Guards on Terminals KT1 ➍ KT1 Cam
Sealed Switch
KT7 ➍ 1 N.O. - 1 N.C.
c 19 Spring Return from Right KT7 Cam AP
1-800T-XAP on white side
20 Spring Return from Both KU7 ➍ KU7 Cam
Knob Insert Colors Note: See Table 1 for cam selections. 2 N.O. - 2 N.C.
Metal Wing Lever ➋ BP 2-800T-XAPs —
800T 800H
Type 4/ Type 4/4X/
Code Operator Function f 1 on white side/1 on black side
13 Description 13 11 Maintained Stackable Sealed Switch
Contact Blocks
Code Code Code Description 1 N.O. - 1 N.C.
16 Spring Return from Right AY
J White JR 1-800T-XAY on white side
141 Spring Return from Both Blank No Contacts on operator
JA Red JRA 2 N.O. - 2 N.C.
Coin Slot ➋ Standard
JB Green JRB BY 2-800T-XAYs —
Code Operator Function 1 N.O. - 1 N.C. 1 on white side/1 on black side
JC Blue JRC A
1-800T-XA on white side
10 Spring Return from Both Note: Associated targets shown in Table 1.
JE Yellow JRE 2 N.O. - 2 N.C.
JF Orange JRF e B 2-800T-XAs —
➊ Packet of colored inserts, one of
1 on white side/1 on black side
JX
Packet of Colored
JRX Cam Option ➌ PenTUFF (Low Voltage)
each color.
Inserts ➊ ➋ Only available on 800T, Type 4/13
Code Description
Metal Wing Lever Colors ➋ Blank KB7 Cam (Std.) AV
1 N.O. - 1 N.C. operators.
1-800T-XAV on white side ➌ If an overlapping cam is required,
Code Color Code KA1 KA1 Cam 2 N.O. - 2 N.C. consult factory.
JA Red — KA7 KA7 Cam
JG Gray —
BV 2-800T-XAVs — ➍ Wing levers are not suitable with
Note: See Table 1 for cam selections. 1 on white side/1 on black side these cam codes.
Table 1. Cam and Contact Block Functionality Table (Note: X = Closed/O = Open)
Cam Codes
Contact Block Contact
Ckts KB7
Suffix Code Block Side KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
(Std.)
A_ A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
White
B O O X O X O O X O O X O O X O O X O O X X O X O O X O O X O O X O X O O O O X O X O
B_
A X O O X O O O O X O O X X O O X O O O O X O O X X O O O O X X O O O O X X O O O O X
H_ Black
C_ B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
White
Black
B O O X O X O O X O X O O O O X O X O X X O O X O O X O X X O O X X X X O O X X X X O
26
Bulletin 800T/800H
3-Position Cylinder Lock Operator

Cat. No. 800T-J41A
Type 4/13
Operator Position Operator Type Cylinder Lock ➌
Contact Key Removal — Left ➊ Key Removal — Center ➊ Key Removal — All ➊
M = Maintained
Type
S = Spring Return
M M M 800T-J41 800T-J42 800T-J44

No S→M M — 800T-J50 —
— — —
Contacts M M←S 800T-J69 800T-J38 —
S→M←S — 800T-J631 —
M M M 800T-J41A 800T-J42A 800T-J44A
O O X
S→M M — 800T-J50A —
X O O
M M←S 800T-J69A 800T-J38A —
1 N.O. - 1 N.C. X-closed/O=open S→M←S — 800T-J631A —
➊ Key removable in maintained positions only.
800 T – J41 KC1 A

a b c d e f
a c (cont’d) e (cont’d) f (cont’d)

Protection Rating Key Removal Position Cam Option ➋ Contact Blocks
Code Description Spring Return from Right Code Description Class 1, Div. 2/Zone 2
T Metal, Type 4/13 Code Operator Function KC7 KC7 Cam Logic Reed
J69 Key Removal — Left KD7 KD7 Cam Code Description
b J38 Key Removal — Center KE7 KE7 Cam
AR
1 N.O. - 1 N.C.
J73 Key Removal — Left and Center KQ1 KQ1 Cam 1-800T-XAR on white side
Finger-Safe Guards Spring Return from Both KQ7 KQ7 Cam 2 N.O. - 2 N.C.
Code Description J631 Key Removal — Center KR1 KR1 Cam BR 2-800T-XARs —
Blank No Guards KR7 KR7 Cam 1 on white side/1 on black side
C Guards on Terminals d KT1 KT1 Cam Sealed Switch
c Key Options for KT7 KT7 Cam 1 N.O. - 1 N.C.
AP
Cylinder Locks ➌ KU7 KU7 Cam 1-800T-XAP on white side
Key Removal Position Code Key No.
Note: See Table 1 for cam selections. 2 N.O. - 2 N.C.
BP 2-800T-XAPs —
Maintained Blank D018 (Standard Key) f 1 on white side/1 on black side
Code Operator Function 03 D020
Contact Blocks Stackable Sealed Switch
J41 Key Removal — Left 04 D025
Code Description 1 N.O. - 1 N.C.
J42 Key Removal — Center 05 D335 AY
Blank No Contacts on operator 1-800T-XAY on white side
J43 Key Removal — Right 06 D429
Standard 2 N.O. - 2 N.C.
J44 Key Removal — All Note: Refer to page 25 for additional key BY 2-800T-XAYs —
option codes. 1 N.O. - 1 N.C.
J45 Key Removal — Left and Center A 1 on white side/1 on black side
1-800T-XA on white side
J46 Key Removal — Right and Left e 2 N.O. - 2 N.C. Note: Associated targets shown in Table 1.
J47 Key Removal — Right and Center B 2-800T-XAs —
Cam Option ➋ ➋ If an overlapping cam is required,
Spring Return from Left 1 on white side/1 on black side consult factory.
Code Description
J50 Key Removal — Center
Blank KB7 Cam (Std.)
PenTUFF (Low Voltage) ➌ Device suppied with 2 keys.
J52 Key Removal — Right 1 N.O. - 1 N.C. Replacement key part number for
KA1 KA1 Cam AV standard d018 key is x181170. See
J51 Key Removal — Right and Center 1-800T-XAV on white side
KA7 KA7 Cam Accessories section for additional
2 N.O. - 2 N.C.
KC1 KC1 Cam BV 2-800T-XAVs — replacement key numbers.
Note: See Table 1 for cam selections. 1 on white side/1 on black side
Table 1. Cam and Contact Block Functionality Table (Note: X = Closed/O = Open)
Cam Codes
Contact Block Contact
Ckts KB7
Suffix Code Block Side KA1 KA7 KC1 KC7 KD7 KE7 KQ1 KQ7 KR1 KR7 KT1 KT7 KU7
(Std.)
A_ A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
White
B_
H_ Black
C_
A X O O X O O O O X O O X X O O O O X X O O X O X X O X X O X X O X O O X X O O X O O
White
Black
27
Bulletin 800T/800H

Cat. No. 800T-N2KN4B Cat. No. 800T-N17KN4B Cat. No. 800H-NR2KF4AAXX
Operator Position
Operator Type Standard Knob Knob Lever Standard Knob
Contact
M = Maintained
Type
M M M M 800T-N2KF4 800T-N17KF4 800H-NR2KF4

No
— — — — S→M M M 800T-N3KF4 800T-N29KF4 800H-NR3KF4
Contacts
M M M←S 800T-N9KF4 800T-N30KF4 800H-NR9KF4
M M M M 800T-N2KF4B 800T-N17KF4B 800H-NR2KF4AAXX

X O O O
O X O O
S→M M M 800T-N3KF4B 800T-N29KF4B 800H-NR3KF4AAXX
O O X O
O O O X
2 N.O. -
2 N.C. M M M←S 800T-N9KF4B 800T-N30KF4B 800H-NR9KF4AAXX
800 T – N 2 KF4 B
a b c d e f
a d e f (cont’d)
Protection Rating Operator Function and Cam Option ➎ Contact Blocks
Code Description Knob Type Code Description 800H
800T Type
T Metal, Type 4/13 KF4 F Cam Type 4/
Standard Knob 4/13 Description 4X/13
H Plastic, Type 4/4X/13 KG4 G Cam
Code Operator Function Code Code
b 2 Maintained KK4 ➏ K Cam
PenTUFF (Low Voltage) ➌
Spring Return from Position 1 to KM4 ➏ M Cam
Finger-Safe Guards 3 BV 2 N.O. - 2 N.C. FFXX
Position 2 KP4 P Cam
Code Description HV 3 N.O. - 3 N.C. FFFX
9
Spring Return from Position 4 to KN4 Overlapping Cam ➋
Blank No Guards Position 3 CV 4 N.O. - 4 N.C. FFFF
Knob Lever ➍ f Class 1, Div. 2/Zone 2
c Code Operator Function Contact Blocks ➎ Logic Reed ➌
17 Maintained 800T Type 800H Type BR 2 N.O. - 2 N.C. TTXX
Knob Insert Colors
Spring Return from Position 1 to 4/13 Description 4/4X/13 HR 3 N.O. - 3 N.C. TTTX
800T 800H 29
Position 2 Code Code CR 4 N.O. - 4 N.C. TTTT
Type 4/ Type 4/4X/
Description
13 13 30
Spring Return from Position 4 to
Blank
No Contacts
Blank
Sealed Switch ➌
Code Code Position 3 on operator BP 2 N.O. - 2 N.C. PPXX
Metal Wing Lever ➍ Standard
N White NR Stackable Sealed Switch ➌
NA Red NRA Code Operator Function 2 N.O. - 2 N.C. BY 2 N.O. - 2 N.C. TTXX
NB Green NRB 11 Maintained 2-800T-XAs —
B AAXX HY 3 N.O. - 3 N.C. TTTX
NC Blue NRC Spring Return from Position 1 to 1 on white side/
13 1 on black side CY 4 N.O. - 4 N.C. TTTT
NE Yellow NRE Position 2
NF Orange NRF Spring Return from Position 4 to 3 N.O. - 3 N.C.
Packet of Colored
14
Position 3 3-800T-XAs — ➊ Packet of colored inserts, one of
H AAAX
NX
Inserts ➊
NRX 2 on white side/ each color except orange.
1 on black side ➋ Overlapping cam. See Publication
Metal Wing Lever Colors ➍ 800T-2.8 for overlap specifications.
4 N.O. - 4 N.C.
Code Color Code 4-800T-XAs — ➌ Contact block mounting same as
NA Red — C AAAA
2 on white side/ listed for standard contact blocks.
NG Gray — 2 on black side ➍ Only available on 800T, Type 4/13
operators.
Table 1. Cam and Contact Block Functionality Table (Note: X = Closed/O = Open) ➎ See Table 1 for proper cam/contact
Cam Codes selection.
Contact Block
Contact C
KF4 KG4 KK4 KM4 KP4 KN4 ➋ ➏ Not available with Wing levers.
Block kt
Suffix Code
Side s
A X O O O X X O O O O X X X O O O O O O X O X O O
White
B O X O O O O X O X X O O O X X O O X O O O O O X
B_ A O O O X X O O O X O O X O O O X O O X X O O X O
Black
H_ B O O X O O O O X O X X O O X O O X O O O X O O O
C_
White
A O O O X X O O O X O O X O O O X O O X X O O X O
Black
B O O X O O O O X O X X O O X O O X O O O X O O O
28
Bulletin 800T/800H
Cylinder Lock Operator

Cat. No. 800T-N32KF4B
Operator Position Cylinder Lock – Type 4/13 ➍

Operator Type
Contact
M = Maintained Key Removal — Position 2 ➊ Key Removal — Position 3 ➊ Key Removal — All ➊
Type
M M M M 800T-N32KF4 800T-N33KF4 800T-N61KF4
No
— — — — S→M M M 800T-N132KF4 800T-N133KF4 —
Contacts
M M M←S 800T-N232KF4 800T-N233KF4 —
X O O O M M M M 800T-N32KF4B 800T-N33KF4B 800T-N61KF4B

O X O O
O O X O
O O O X S→M M M 800T-N132KF4B 800T-N133KF4B —
2 N.O. -
2 N.C. X = Closed/O = Open M M M←S 800T-N232KF4B 800T-N233KF4B —
➊ Key removable in maintained positions only.
800 T – N31 KM4 C

a b c d e f
a c (cont’d) d f
Protection Rating Key Removal Position and Key Options for Contact Blocks
Code Description Operator Function Cylinder Locks ➍ Code Description
T Metal, Type 4/13 Spring Return From D Series Blank No Contacts on operator
Position 1 to Position 2 Standard
b Code Operator Function
Code Key No.
Blank D018 (Standard Key) 2 N.O. - 2 N.C.
Finger-Safe Guards N61 Key Removal All Positions 03 D020 2-800T-XAs —
B
Code Description Key Removal 04 D025 1 on white side/
N132
Blank No Guards Position 2 1 on black side
05 D335
C Guards on Terminals Key Removal 3 N.O. - 3 N.C.
N133 06 D429
Position 3 3-800T-XAs —
c Note: Refer to page 25 for additional key H
Key Removal 2 on white side/
N134 option codes. 1 on black side
Position 4
Key Removal Position and
Operator Function
N154 Key Removal Positions 2, 3, and 4 e 4 N.O. - 4 N.C.
4-800T-XAs —
Spring Return From C
Maintained Position 4 to Position 3 Cam Option 2 on white side/
Code Operator Function 2 on black side
Code Operator Function Code Description
Key Removal Key Removal KF4 F Cam PenTUFF (Low Voltage) ➌
N31 N231
Position 1 Position 1 BV 2 N.O. - 2 N.C.
KG4 G Cam
Key Removal Key Removal HV 3 N.O. - 3 N.C.
N32 N232 KK4 K Cam
Position 2 Position 2 CV 4 N.O. - 4 N.C.
KM4 M Cam
Key Removal Key Removal
N33
Position 3 N233 KP4 P Cam Class 1, Div. 2/Zone 2
Position 3
Key Removal KN4 Overlapping Cam ➋ Logic Reed ➌
N34 Key Removal
Position 4 N251 Note: See Table 1 for cam selections. BR 2 N.O. - 2 N.C.
Positions 1, 2, and 3
HR 3 N.O. - 3 N.C.
Table 1. Cam and Contact Block Functionality Table (Note: X = Closed/O = Open) CR 4 N.O. - 4 N.C.
Contact C
Cam Codes (X = Closed/O = Open) Sealed Switch ➌
Contact Block
Block kt KF4 KG4 KK4 KM4 KP4 KN4 ➋ BP 2 N.O. - 2 N.C.
Suffix Code
Side s Stackable Sealed Switch ➌
A X O O O X X O O O O X X X O O O O O O X O X O O BY 2 N.O. - 2 N.C.
White
B O X O O O O X O X X O O O X X O O X O O O O O X HY 3 N.O. - 3 N.C.
B_ A O O O X X O O O X O O X O O O X O O X X O O X O CY 4 N.O. - 4 N.C.
Black
H_ B O O X O O O O X O X X O O X O O X O O O X O O O Note: Associated targets shown in Table 1.
C_
White
A O O O X X O O O X O O X O O O X O O X X O O X O
Black
B O O X O O O O X O X X O O X O O X O O O X O O O
➋ Overlapping cam. See Publication 800T-2.8 for overlap specifications.

➌ Contact block mounting same as listed for standard contact blocks.
➍ Device supplied with 2 keys. Replacement key part number for standard D018 key is x-181170. See Accessories section
for additional replacement key numbers.
29
Bulletin 800T/800H
2-Position Knob/Lever Type Selector Switch Units, Illuminated
Standard Knob Operator Knob Lever Operator

Cat. No. 800T-16HR2KB6AX Cat. No. 800H-16HRR17KB6AX

Operator Position
Standard Knob Standard Knob
Operator Type
Type Lamp Volts Color M = Maintained
S = Spring Return Cat. No. Cat. No.
Operator Only ➊ No Contacts M M 800T-00HX2KB6 800H-00HRX2KB6

M M 800T-24HR2KB6AX 800H-24HRR2KB6AX
Incandescent S→M ➋ 800T-24HR4KL8AX 800H-24HRR4KL8AX
M←S 800T-24HR5KL8AX 800H-24HRR5KL8AX
Full 24 AC/DC Red X O
M M 800T-24HRH2KB6AX 800H-24HRRH2KB6AX
Voltage O X
LED S→M ➋ 800T-24HH4KL8AX 800H-24HRH4KL8AX
M←S 800T-24HRH5KL8AX 800H-24HRRH5KL8AX
No Lamp 0…250 AC/DC No Knob M M 800T-25HXN2KB6AX 800H-25HRXN2KB6AX
M M 800T-16HR2KB6AX 800H-16HRR2KB6AX
Incandescent S→M ➋ 800T-16HR4KL8AX 800H-16HRR4KL8AX
M←S 800T-16HR5KL8AX 800H-16HRR5KL8AX
120 AC Red X O
Transformer M M 800T-16HRH2KB6AX 800H-16HRRH2KB6AX
50/60 Hz O X
LED S→M ➋ 800T-16HRH4KL8AX 800H-16HRRH4KL8AX
M←S 800T-16HRH5KL8AX 800H-16HRRH5KL8AX
No Lamp No Knob M M 800T-16HXN2KB6AX 800H-16HRXN2KB6AX
➊ Operator only supplied without power module, lamp, lens cap, or contact blocks.
➋ Target tables are reversed from those shown.
First Second
Level Level
800 T – 16 H R 2 KB7 A X
a b c d e f g h i j
a e i, j Table 1. Selector Switch Cam

Targets
Protection Rating Knob Color Contact Blocks ➎ Cam Description (2-Position)
Code Description Code Color Code Description
T Metal, Type 4/13 A Amber Target
Blank
H Plastic, Type 4/4X/13 B Blue (both No Contacts on operator Contact Block Code ➏
C Clear pos.)
b G Green Standard O X D, H, V, R, 5
Finger-Safe Guards R Red D 1 N.O. X O E, U, W, S, 6
Code Description W White E 1 N.C. X = Closed/O = Open
Blank No Guards X No Knob
A 1 N.O. - 1 N.C. Table 2. Contact Block Code
f X No Contacts in this position Reduction Rules
c Illumination Options PenTUFF (Low Voltage) Contact Block Substitution
Power Module Type Code Description H 1 N.O. Combination Code
and Voltage Blank Incandescent U 1 N.C. Standard
Full Voltage H LED ➍ F 1 N.O. - 1 N.C. D+E A
X No Contact in this position M➐
Code Description g Class 1, Div. 2/Zone 2
D+D
6 6V AC/DC E+E N
12 12V AC/DC Operator Function and Knob Logic Reed D+J B
24 24V AC/DC Type V 1 N.O. E+J C
32 32V AC/DC ➌ Standard Knob or No Knob W 1 N.C.
48 48V AC/DC Code Operator Function T 1 N.O. - 1 N.C.
➌ LED only.
10 120V AC ➌ 2 Maintained ➍ LEDs available in red, green,
X No Contacts in this position amber, blue, and white. White LEDs
13 130V AC/DC ➌ 4 Spring Return from Left
Transformer Sealed Switch only available in 6V, 24V, 120V, and
5 Spring Return from Right 130V full voltage and all transformer
36 48V AC 50/60 Hz R 1 N.O.
Knob Lever units. LED color matches lens color,
16 120V AC 50/60 Hz S 1 N.C.
17 Maintained except clear lens supplied with
26 240V AC 50/60 Hz P 1 N.O. - 1 N.C. white LED and white lens supplied
76 277V AC 50/60 Hz X No Contacts in this position with amber LED. All LEDs except
19 Spring Return from Right
46 480V AC 50/60 Hz Stackable Sealed Switch 120V have an internal shunt resistor
56 600V AC 50/60 Hz h 5 1 N.O.
for use with solid-state outputs.
➎ Contact blocks used on white side
d Cam Options 6 1 N.C. only.
No. of Positions 2-Position
7 1 N.O. - 1 N.C. ➏ Target tables are reversed for spring
Code Operator Function
X No Contacts in this position return from left operators.
800T Type 800H ➐ XA2 and XA2R contact blocks cannot
4/13 Description Type 4/4X/13 KB6 Maintained Cam be stacked upon, but can stack on
Code Code KL8 Spring Return Cam other contact blocks.
H 2-Position HR
30
Bulletin 800T/800H
3-Position Knob/Lever Type Selector Switch Units, Illuminated
Standard Knob Operator Knob Lever Operator

Cat. No. 800T-16JR2KB7AX Cat. No. 800H-16JRR17KB7AX
Operator Position Operator Type Standard Knob Standard Knob
Type Lamp Volts Color M = Maintained
S = Spring Return Cat. No. Cat. No.
Operator Only ➊ No Contacts M M M 800T-00JX2KB7 800H-24JRR17KB7AX

M M M 800T-24JR2KB7AX 800H-24JRR18KB7AX
Incandescent S→M M 800T-24JR4KB7AX 800H-24JRR19KB7AX
M M←S 800T-24JR5KB7AX 800H-24JRRH17KB7AX
Full 24 AC/DC Red X O O
M M M 800T-24JRH2KB7AX 800H-24JRRH18KB7AX
Voltage O O X
LED S→M M 800T-24JRH4KB7AX 800H-24JRRH20KB7AX
M M←S 800T-24JRH5KB7AX 800H-16JRR17KB7AX
No Lamp 0…250 AC/DC No Knob M M M 800T-25JXN2KB7AX 800H-16JRR18KB7AX
M M M 800T-16JR2KB7AX 800H-16JRR19KB7AX
Incandescent S→M M 800T-16JR4KB7AX 800H-16JRRH17KB7AX
M M←S 800T-16JR5KB7AX 800H-16JRRH18KB7AX
120 AC Red X O O
Transformer M M M 800T-16JRH2KB7AX 800H-16JRRH19KB7AX
50/60 Hz O O X
LED S→M M 800T-16JRH4KB7AX 800H-24JRR17KB7AX
M M←S 800T-16JRH5KB7AX 800H-24JRR18KB7AX
No Lamp No Knob M M M 800T-16JXN2KB7AX 800H-24JRR19KB7AX
First Second
Level Level
800 T – 16 J R 2 KB7 A X
a b c d e f g h i j
a e i, j i, j (cont’d)
Protection Rating Knob Color Contact Blocks ➍ Contact Blocks ➍
Code Description Code Color Code Description Code Description
T Metal, Type 4/13 A Amber Blank Class 1, Div. 2/Zone 2
H Plastic, Type 4/4X/13 B Blue (both No Contacts on operator
pos.)
Logic Reed
C Clear
b G Green Standard V 1 N.O.
R Red W 1 N.C.
Finger-Safe Guards D 1 N.O.
W White T 1 N.O. - 1 N.C.
E 1 N.C.
Code Description X No Contacts in this position
X No Knob G 1 N.O.E.M.
Blank No Guards Sealed Switch
C Guards on Terminals f J 1 N.C.L.B.
A 1 N.O. - 1 N.C. R 1 N.O.
c Illumination Options X No Contacts in this position S 1 N.C.
Code Description P 1 N.O. - 1 N.C.
PenTUFF (Low Voltage)
Power Module Type and Blank Incandescent X No Contacts in this position
H 1 N.O.
Voltage H LED ➌
U 1 N.C. Stackable Sealed Switch
Full Voltage g I 1 N.O.E.M. 5 1 N.O.
Code Description Operator Function & Knob Type Q 1 N.C.L.B. 6 1 N.C.
6 6V AC/DC Standard Knob or No Knob F 1 N.O. - 1 N.C. 7 1 N.O. - 1 N.C.
12 12V AC/DC Code Operator Function X No Contacts in this position X No Contacts in this position
24 24V AC/DC 2 Maintained Table 1. Selector Switch Cam Targets
32 32V AC/DC ➋ 4 Spring Return from Left Target Cam Description (3-Position)
48 48V AC/DC 5 Spring Return from Right
10 120V AC ➋ 91 Spring Return from Both KB7 KC1 KC7 KE7 KQ1 KT1
13 130V AC/DC ➋ Knob Lever D, H, V, D, H, V, E,U,W,S,
Transformer Code Operator Function X O O — D, H, V —
R, 5 R, 5 6
Code Description 17 Maintained
E, U, W, E, U, W, E, U, W,
18 Spring Return from Left O X O — — —
16 120V AC 50/60 Hz S, 6 S, 6 S, 6
26 240V AC 50/60 Hz 19 Spring Return from Right
E, U, W, D, H, V, D, H, V,
20 Spring Return from Both O O X — — —
Other voltages available S, 6 R, 5 R, 5
d h X X O G, I J, Q — — — J, Q
No. of Positions Cam Options E,U,W,S,

O X X J,Q — J,Q — —
800T 800H 3-Position 6
Type 4/13 Type 4/4X/13 Code Operator Function X O X — G,I G,I — D,H,V,R,5 —
Description
Code Code KB7 B7 Cam ➋ LED only.
KC1 C1 Cam ➌ LEDs available in red, green, amber, blue, and white. White LEDs only available in
J 3-Position JR 6V, 24V, 120V, and 130V full voltage and all transformer units. LED color matches
KC7 C7 Cam lens color, except clear lens supplied with white LED and white lens supplied with
KE7 E7 Cam amber LED. All LEDs except 120V have an internal shunt resistor for use with
KQ1 Q1 Cam solid-state outputs.
KT1 T1 Cam ➍ Contact blocks used on white side only.
31
Bulletin 800T/800H
Pilot Lights
Pilot Light Units➌ (
Transformer Type Pilot Light Push-to-Test Pilot Light Transformer Type Pilot Light Push-to-Test Pilot Light
Cat. No. 800T-P16R Cat. No. 800T-PT16R Cat. No. 800H-PR16R Cat. No. 800H-PRT16R
Type Lamp Volts Color Pilot Light Push-to-Test ➊ Pilot Light Push-to-Test ➊
Operator Only ➋ 800T-S00 800T-SB00XX 800H-SR00 800H-SRB00XX
Red 800T-Q24R 800T-QT24R 800H-QR24R 800H-QRT24R
Incandescent 24 AC/DC Green 800T-Q24G 800T-QT24G 800H-QR24G 800H-QRT24G
Amber 800T-Q24A 800T-QT24A 800H-QR24A 800H-QRT24A
Red 800T-QH10R 800T-QTH10R 800H-QRH10R 800H-QRTH10R
120 AC Green 800T-QH10G 800T-QTH10G 800H-QRH10G 800H-QRTH10G
Full Voltage Amber 800T-QH10A 800T-QTH10A 800H-QRH10A 800H-QRTH10A
LED
Red 800T-QH24R 800T-QTH24R 800H-QRH24R 800H-QRTH24R
24 AC/DC Green 800T-QH24G 800T-QTH24G 800H-QRH24G 800H-QRTH24G
Amber 800T-QH24A 800T-QTH24A 800H-QRH24A 800H-QRTH24A
No Lamp 0…250 AC/DC No Lens 800T-QN25 800T-QTN25 800H-QRN25 800H-QRTN25
Red 800T-P16R 800T-PT16R 800H-PR16R 800H-PRT16R
Incandescent Green 800T-P16G 800T-PT16G 800H-PR16G 800H-PRT16G
Amber 800T-P16A 800T-PT16A 800H-PR16A 800H-PRT16A
120 AC
Transformer Red 800T-PH16R 800T-PTH16R 800H-PRH16R 800H-PRTH16R
50/60 Hz
LED Green 800T-PH16G 800T-PTH16G 800H-PRH16G 800H-PRTH16G
Amber 800T-PH16A 800T-PTH16A 800H-PRH16A 800H-PRTH16A
No Lamp No Lens 800T-PN16 800T-PTN16 800H-PRN16 800H-PRTN16
➊ Includes one standard 800T-XA (1 N.O. - 1 N.C.) contact block. For typical pilot light wiring diagrams, see page 65.
➋ Operator only supplied without power module, lamp, lens cap, or contact blocks.
➌ All pilot lights, except push-to-test without sealed contacts and dual input transformer relay, are rated for Class 1, Division 2 applications.
800 T – P 16 R (Pilot Lights)

a b c d e f g
800 T – Q T 24 G AR (Push-to-Test)
a b c d e f g h
a d f g
Protection Rating Lamp Test Options Voltage Lens Color
Code Description Code Description Transformer Plastic Glass
Color
T Metal, Type 4/13 Blank No Test Option Code Description Code Code ➓
H Plastic, Type 4/4X/13 T Push-to-Test 36 48V AC 50/60 Hz Blank No Lens Blank
D Dual Input — Diode ➎ 16 120V AC 50/60 Hz A Amber D
b DT Dual Input — Transformer Relay 26 240V AC 50/60 Hz B Blue E
Finger-Safe Guards Note: Push-to-Test Pilot Light is supplied 76 277V AC 50/60 Hz C Clear F
Code Description with a factory jumpered 800T-XA, 1 N.O.- 46 480V AC 50/60 Hz G Green H
1 N.C. Contact Block. R Red J
Blank No Guards 56 600V AC 50/60 Hz
C Guards on Terminals e Full Voltage W White K
c Illumination Options 06 6V AC/DC h

12 12V AC/DC
Power Module Type Transformer/Full Voltage Contact Blocks
24 24V AC/DC
800T 800H Code Description
32 32V AC/DC ➑ (Push-to-test units only)
Type Type Blank Incandescent Code Description
Description 48 48V AC/DC
4/13 4/4X/13 F Flashing Incandescent ➏ Standard
10 120V AC/DC ➒
Code Code H LED ➐
13 130V AC/DC ➑ Blank 1 N.O. - 1 N.C.
Transformer Resistor/Neon
P
(or Dual Input)
PR 20 240V AC/DC ➑ PenTUFF (Low Voltage)
Blank No Options AV 1 N.O. - 1 N.C.
Full Voltage (or Resistor
Q QR Dual Input 11 120V AC/DC Resistor Class 1, Div. 2/Zone 2
Resistor)
Blank Incandescent
R Neon ➍ RR Neon Logic Reed
H LED ➐
10 120V AC/DC AR 1 N.O. - 1 N.C.
➍ Neon is only available in amber or
20 240V AC/DC Sealed Switch
clear. ➐ LEDs available in red, green, amber,
➎ Diode type dual input provides circuit blue, and white. White LEDs only Dual Input AP 1 N.O. - 1 N.C.
isolation via opposing diodes. Not available in 6V, 24V, 120V, and 130V 16 120V AC Stackable Sealed Switch
recommended for use with solid-state full voltage and all transformer units.
outputs and neon indicators. LED color matches lens color, except 24V AC/DC AY 1 N.O. - 1 N.C.
24
➏ Flashing lamps are only available in 6V clear lens supplied with white LED and (Dual input diode only)
full voltage units and all transformer white lens supplied with amber LED. ➓ Glass lens available on 800T pilot
units. All LEDs except 120V have an internal ➑ 32V and 130V are LED only. 240V is lights only. Not available on 800T push-
shunt resistor for use with solid-state incandescent only. to-test units oro on 800H devices.
outputs. ➒ 120V LED is AC only and does not
contain internal shunt resistor. For AC/
DC and internal shunt resistor, order
130V AC/DC LED (Code 13).
32
Bulletin 800T/800H
Push-Pull Operators
2-Position Push-Pull and Push-Pull/Twist Release Units, Non-Illuminated
2-Position Push-Pull 2-Position Push-Pull/Twist 2-Position Push-Pull/Twist

Cat. No. 800T-FX6D4 Cat. No. 800T-FXT6D4 Cat. No. 800H-FRXT6D4
Button Push-Pull/ Push-Pull/

Contact Type Push-Pull
Color Twist Release Twist Release
Out In Cat. No. Cat. No. Cat. No.
N.C.L.B. X O 800T-FX6D4 ➋ 800T-FXT6D4 ➋ 800H-FRXT6D4 ➋
N.O. - O X
800T-FX6A1 ➋ 800T-FXT6A1 ➋ 800H-FRXT6A1 ➋
N.C.L.B. ➊ X O Red
N.C.L.B. - X O
800T-FX6A5 ➋ 800T-FXT6A5 ➋ 800H-FRXT6A5 ➋
N.C.L.B. ➊ X O
➋ Meets EN-418 and IEC 60947-5-5 standards for emergency stop applications.
800 T – FX 1 A1
a b c d e
a d e (cont’d)
Protection Rating Color Cap Contact Block(s)
Code Description Code Color Operator Position
T Metal, Type 4/13 Blank No Cap ➍
H Plastic, Type 4/4X/13 1 Green Code Description
2 Black
b 3 Orange Out In
4 Gray Blank — — No Contacts on operator
Finger-Safe Guards PenTUFF (Low Voltage)
5 White
Code Description D1V O X 1 N.O.
6 Red
Blank No Guards D2V X O 1 N.C.
7 Blue
C Guards on Terminals D4V X O 1 N.C.L.B.
9 Yellow
O X
c e AV
X O
1 N.O. - 1 N.C.
Head Type ➌ Contact Block(s)

Class 1, Div. 2/Zone 2
800H Logic Reed
800T Type Operator Position
Type D1R O X 1 N.O.
4/13 Description 4/4X/13
Code Description D2R X O 1 N.C.
Code Code
O X
FX Mushroom Head (Push-Pull) — AR 1 N.O. - 1 N.C.
X O
Out In
Jumbo Mushroom Head Sealed Switch
FXJ — Blank — — No Contacts on operator
(Push-Pull)
Standard D1P O X 1 N.O.
FXT Push-Pull/Twist to Release FRXT
D2P X O 1 N.C.
Jumbo Head Push-Pull w/ D1 O X 1 N.O.
FXJT FRXJT O X 1 N.O.
Twist to Release D2 X O 1 N.C. AP
X O 1 N.C.
D4 X O 1 N.C.L.B.
Stackable Sealed Switch
O X
A 1 N.O. - 1 N.C. D1Y O X 1 N.O.
X O
O X 1 N.O. - D2Y X O 1 N.C.
A1
X O 1 N.C.L.B. O X
AY 1 N.O. - 1 N.C.
X O X O
A5 2 N.C.L.B. Note: X = Closed/O = Open
X O
➌ 2-position push-pull and push-pull/twist-to-release devices with N.C.L.B. contacts meet EN-418 and IEC 60947-5-5 standards for emergency stop applications.
➍ Not valid with head Type J or JT.

33
Bulletin 800T/800H
Push-Pull Operators, Continued
3-Position Push-Pull Units, Non-Illuminated
3-Position Push-Pull 3-Position Push-Pull

Cat. No. 800T-FXM6A7 Cat. No. 800H-FRXM6A7
Operator Position Operator Position
Contact Type
Momentary Maintained Maintained Momentary Maintained Momentary
Out Center In Out Center In
N.C.- X O O X O O
N.C.L.B. ➊ X X O X X O
Type 4/13 Type 4/4X/13 Type 4/13 Type 4/4X/13

Button Color Push-Pull Push-Pull Push-Pull Push-Pull
Red 800T-FXM6A7 800H-FRXM6A7 800T-FXN6A7 800H-FRXN6A7
800 T – FX M 1 A7
a b c d e f
a e f (cont’d)
Protection Rating Color Cap Contact Block(s)
Code Description Code Color Operator Position
T Metal, Type 4/13 Blank No Cap ➌
Code Description
H Plastic, Type 4/4X/13 1 Green
2 Black Out Ctr. In
b 3 Orange Class 1, Div. 2/Zone 2
Finger-Safe Guards 4 Gray
Logic Reed
Code Description 5 White
O O X 1 N.O. -
6 Red AR
Blank No Guards X O O 1 N.C.
C Guards on Terminals 7 Blue
Sealed Switch
9 Yellow
c AP
O O X 1 N.O. -
f X O O 1 N.C.
Head Type ➋ Stackable Sealed Switch
800H Contact Block(s) O O X 1 N.O. -
800T Operator Position AY
Type X O O 1 N.C.
Type 4/13 Description 4/4X/13 Note: X = Closed/O = Open
Code Code Code Description
FX Mushroom Head (Push-Pull) FRX Out Ctr. In
Jumbo Mushroom Head Blank — — — No Contacts on Operator
FXJ FRXJ
(Push-Pull)
Standard
d A
O O X 1 N.O. -
X O O 1 N.C.
Operator Function O O X 1 N.O. -
Operator Position A1
X X O 1 N.C.L.B.
X O O 1 N.C. -
Code A7
X X O 1 N.C.L.B.
X O O 2 N.C. -
Out Center In B6
X X O 2 N.C.L.B.
M Momentary Maintained Maintained PenTUFF (Low Voltage)
N Momentary Maintained Momentary
O O X 1 N.O. -
AV
X O O 1 N.C.
X O O 1 N.C. -
A7V
X X O 1 N.C.L.B.
➋ 3-position push-pull and push-pull/twist-to-release devices with N.C.L.B. contacts meet EN-418 and IEC 60947-5-5 standards for emergency stop applications.
➌ Not valid with head Type J.

34
Bulletin 800T/800H
2-Position Push-Pull and Push-Pull/Twist Release Units, Illuminated
Illuminated 2-Position Push-Pull Illuminated 2-Position Push-Pull/Twist Illuminated 2-Position Push-Pull/Twist

Cat. No. 800T-FXP16RA1 Cat. No. 800T-FXTP16RA1 Cat. No. 800H-FRXTP16RA1
Push-Pull/ Push-Pull/
Type Lamp Volts Color Push-Pull
Twist Release Twist Release
Contacts Out In Cat. No. Cat. No. Cat. No.
Operator Only ➊ No Contacts 800T-FXS00X 800T-FXTS00X 800H-FRXTS00X
Incandescent 24 AC/DC 800T-FXQ24RA1 ➌ 800T-FXTQ24RA1 ➌ 800H-FRXTQ24RA1 ➌
Red N.O. - O X
120 AC 800T-FXQH10RA1 ➌ 800T-FXTQH10RA1 ➌ 800H-FRXTQH10RA1 ➌
Full Voltage LED N.C.L.B. ➋ X O
24 AC/DC 800T-FXQH24RA1 ➌ 800T-FXTQH24RA1 ➌ 800H-FRXTQH24RA1 ➌
No Lamp 0…250 AC/DC No Lens 800T-FXQN25XA1 ➌ 800T-FXTQN25XA1 ➌ 800H-FRXTQN25XA1 ➌
Incandescent 120 AC 800T-FXP16RA1 ➌ 800T-FXTP16RA1 ➌ 800H-FRXTP16RA1 ➌
Red N.O. - O X
Transformer LED 120 AC 800T-FXPH16RA1 ➌ 800T-FXTPH16RA1 ➌ 800H-FRXTPH16RA1 ➌
N.C.L.B. ➋ X O
No Lamp 0…250 AC/DC No Lens 800T-FXPN16XA1 ➌ 800T-FXTPN16XA1 ➌ 800H-FRXTPN16XA1 ➌
➋ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change
state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➌ Meets EN-418 and IEC 60947-5-5 standards for emergency stop applications.
800 T – FX T PH 16 R A1
a b c d e f g h
a e (cont’d) g h (cont’d)
Protection Rating Illumination Options Color Cap Contact Blocks
Code Description Code Description Code Color Code Description
T Metal, Type 4/13 Resistor X No Cap ➓ Stackable Sealed Switch
H Plastic, Type 4/4X/13 Q Incandescent A Amber D1Y 1 N.O.
Neon B Blue
b R Neon ➏ C Clear
D2Y 1 N.C.
AY 1 N.O. - 1 N.C.
Finger-Safe Guards Dual Input G Green
Code Description D Diode Type ➐ R Red
Blank No Guards DH Diode Type LED ➎➐ W White Simple 2-Position Switch
C Guards on Terminals DT Transformer — Relay Type
DTH Transformer — Relay Type LED ➎ h
c f Contact Blocks
Contact
Head Type ➍ Voltage Code Description

N.O. O X
800T 800H Blank No Contacts on operator
Type Type
Transformer N.C./N.C.L.B. X O
Description Code Description Standard
4/13 4/4X/13
36 48V AC 50/60 Hz D1 1 N.O. ➍ 2-position push-pull and push-pull/
Code Code twist-to-release devices with N.C.L.B.
16 120V AC 50/60 Hz D2 1 N.C.
FX Mushroom Head FRX contacts meet EN-418 and
26 240V AC 50/60 Hz D4 1 N.C.L.B.
Jumbo Mushroom IEC 60947-5-5 standards for
FXJ FRXJ 76 277V AC 50/60 Hz A 1 N.O. - 1 N.C. emergency stop applications.
Head
46 480V AC 50/60 Hz A1 1 N.O. - 1 N.C.L.B. ➎ LEDs available in red, green, amber,
d 56 600V AC 50/60 Hz A5 2 N.C.L.B. blue, and white. White LEDs only
available in 6V, 24V 120V, and 130V
Full Voltage PenTUFF (Low Voltage)
Operator Function full voltage and all transformer units.
06 6V AC/DC D1V 1 N.O. LED color matches lens color, except
2-Position 12 12V AC/DC clear lens supplied with white LED and
D2V 1 N.C.
Code Description 24 24V AC/DC white lens supplied with amber LED.
Blank Push-Pull D4V 1 N.C.L.B. All LEDs except 120V have an internal
32 32V AC/DC ➑
AV 1 N.O. - 1 N.C. shunt resistor for use with solid-state
T Push-Pull/Twist 48 48V AC/DC outputs.
A1V 1 N.O. - 1 N.C.L.B.
10 120V AC/DC ➒ ➏ Neon is available in amber or clear.
e 13 130V AC/DC ➑ Class 1, Div. 2/Zone 2 ➐ Diode type dual input provides circuit
Illumination Options 20 240V AC/DC ➑ Logic Reed isolation via opposing diodes. Not
recommended for use with solid-state
Transformer Resistor D1R 1 N.O. outputs and neon indicators.
Code Description 11 120V AC/DC Resistor D2R 1 N.C. ➑ 32V and 130V are LED only. 240V is
Neon AR 1 N.O. - 1 N.C. incandescent only.
P Incandescent ➒ 120V LED is AC only and does not
PH LED ➎ 10 120V AC/DC Sealed Switch contain internal shunt resistor. For AC/
20 240V AC/DC D1P 1 N.O. DC and internal shunt resistor, order
Full Voltage
Q Incandescent
Dual Input D2P 1 N.C. 130V AC/DC LED (code 13).
16 120V AC ➓ Not valid with head Type J.
QH LED ➎ AP 1 N.O. - 1 N.C.
24V AC/DC
24
(Dual input diode only)
Accessories — Page 46 Legend Plates — Page 59

Lamp Information — Page 58 Approximate Dimensions — Page 65
35
Bulletin 800T/800H
3-Position Push-Pull Units, Illuminated
Illuminated 3-Position Push-Pull

Illuminated 3-Position Push-Pull Cat. No. 800H-FRXMP16A7
Cat. No. 800T-FXMP16RA7
Operator Position Operator Position
Momentary Maintained Maintained Momentary Maintained Momentary

Contacts Out Center In Out Center In
N.C.- X O O X O O
N.C.L.B. ➊ X X O X X O
Type 4/13 Type 4/4x/13 Type 4/13 Type 4/4x/13
Type Lamp Volts Color Push-Pull Push-Pull Push-Pull Push-Pull
Operator Only ➋ 800T-FXMS00X 800H-FRXMS00X 800T-FXNS00X 800H-FRXNS00X
Incandescent 24 AC/DC 800T-FXMQ24RA7 800H-FRXMQ24RA7 800T-FXNQ24RA7 800H-FRXNQ24RA7
120 AC Red 800T-FXMQH10RA7 800H-FRXMQH10RA7 800T-FXNQH10RA7 800H-FRXNQH10RA7
Full Voltage LED
24 AC/DC 800T-FXMQH24RA7 800H-FRXMQH24RA7 800T-FXNQH24RA7 800H-FRXNQH24RA7
No Lamp 0…250 AC/DC No Lens 800T-FXMQN25XA7 800H-FRXMQN25XA7 800T-FXNQN25XA7 800H-FRXNQN25XA7
Incandescent 120 AC 800T-FXMP16RA7 800H-FRXMP16RA7 800T-FXNP16RA7 800H-FRXNP16RA7
Red
Transformer LED 120 AC 800T-FXMPH16RA7 800H-FRXMPH16RA7 800T-FXNPH16RA7 800H-FRXNPH16RA7
No Lamp 120 AC No Lens 800T-FXMPN16XA7 800H-FRXMPN16XA7 800T-FXNPN16XA7 800H-FRXNPN16XA7
➊ Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts change
state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➋ Operator only supplied without power module, lamp, lens cap, or contact blocks.
800 T – FX M PH 16 R A7
a b c d e f g h
a e (cont’d) f (cont’d) h (cont’d)

Protection Rating Illumination Options Voltage Contact Blocks
Code Description Full Voltage Full Voltage Code Description
T Metal, Type 4/13 Code Description Code Description Sealed Switch
H Plastic, Type 4/4X/13
Q Incandescent Dual Input AP 1 N.O. - 1 N.C.
b QH LED ➍ 16 120V AC Stackable Sealed Switch
Finger-Safe Guards Resistor 24V AC/DC AY 1 N.O. - 1 N.C.
24
Q Incandescent (Dual input diode only)
Code Description
Blank No Guards Neon g Simple 3-position Switch
C Guards on Terminals R Neon ➎
Dual Input
Color Cap
c Code Color Contact
D Diode Type ➏
Head Type ➌ DH Diode Type LED ➍➏
X No Cap ➒
800T 800H A Amber
DT Transformer — Relay Type N.O. O O X
Type Type B Blue
4/13
Description
4/4X/13 DTH Transformer — Relay Type LED ➍ N.C. X O O
C Clear
Code Code f G Green N.C.L.B. X X O
FX Mushroom Head FRX
Voltage R Red ➌ 2-position push-pull & push-pull/twist-
Jumbo Mushroom
FXJ FRXJ W White to-release devices with N.C.L.B.
Head Transformer contacts meet EN-418 and
d Code Description h IEC 60947-5-5 standards for
16 120V AC 50/60 Hz emergency stop applications.
Operator Function Contact Blocks ➍ LEDs available in red, green, amber,
3-Position 26 240V AC 50/60 Hz blue, and white. White LEDs only
Code Description
Operator Position Other voltages available available in 6V, 24V 120V, and 130V
Blank No Contacts on operator full voltage and all transformer units.
Full Voltage
Standard LED color matches lens color, except
06 6V AC/DC clear lens supplied with white LED and
Code A 1 N.O. - 1 N.C.
12 12V AC/DC white lens supplied with amber LED.
A1 1 N.O. - 1 N.C.L.B. All LEDs except 120V have an internal
24 24V AC/DC
Out Ctr. In A7 1 N.C. - 1 N.C.L.B. shunt resistor for use with solid-state
32 32V AC/DC ➐ outputs.
M ★ ‡ ‡ PenTUFF (Low Voltage)
48 48V AC/DC ➎ Neon is available in amber or clear.
N ★ ‡ ★ AV 1 N.O. - 1 N.C. ➏ Diode type dual input provides circuit
10 120V AC/DC ➑
★ Momentary ‡ Maintained A7V 1 N.C. - 1 N.C.L.B. isolation via opposing diodes. Not
13 130V AC/DC ➐ recommended for use with solid-state
e 20 240V AC/DC ➐ Class 1, Div. 2/Zone 2
outputs and neon indicators.
Illumination Options Resistor Logic Reed ➐ 32V and 130V are LED only. 240V is
AR 1 N.O. - 1 N.C. incandescent only.
Transformer 11 120V AC/DC Resistor ➑ 120V LED is AC only and does not
Code Description Neon contain internal shunt resistor. For AC/
P Incandescent 10 120V AC/DC DC and internal shunt resistor, order
130V AC/DC LED (code 13).
PH LED ➍ 20 240V AC/DC ➒ Not valid with head Type J.
36
Bulletin 800T/800H
Specialty Operators
Potentiometer Units ➊
Potentiometer Unit Potentiometer Unit

Cat. No. 800T-U24 Cat. No. 800H-UR4
Type 4/13 Type 4/4X/13 Type 4/13 Type 4/4X/13

Resistance Potentiometer ➋ Potentiometer ➋ Resistance Potentiometer ➋ Potentiometer ➋
25 kΩ 800T-U37 800H-UR37
Operator Only (Without Resistive Element) 800T-N37 ➌ 800H-N102 ➌
50 kΩ 800T-U41 800H-UR41
150 Ω 800T-U4 800H-UR4 75 kΩ 800T-U46 800H-UR46
500 Ω 800T-U12 800H-UR12 0.1 MΩ 800T-U49 800H-UR49
1000 Ω 800T-U13 800H-UR13 0.15 MΩ 800T-U50 800H-UR50
1500 Ω 800T-U16 800H-UR16 0.4 MΩ 800T-U54 800H-UR54
2500 Ω 800T-U19 800H-UR19 0.5 MΩ 800T-U55 800H-UR55
5000 Ω 800T-U24 800H-UR24 1 MΩ 800T-U57 800H-UR57
10 kΩ 800T-U29 800H-UR29 2 MΩ 800T-U59 800H-UR59
15 kΩ 800T-U34 800H-UR34 3 MΩ 800T-U62 800H-UR62
20 kΩ 800T-U35 800H-UR35 4 MΩ 800T-U64 800H-UR64
➊ Single turn operation with 312 degree rotation.
➋ Rated for 300V AC/DC 2 W maximum. Specify Bulletin 800TC or 800HC for finger-safe potentiometers. Example: Cat. No. 800T-U29 becomes 800TC-U29.
➌ For use with Type J potentiometers having a shaft length of 7/8" (22.2 mm) and a shaft diameter of 1/4" (6.3 mm).
Mechanically Interlocked Maintained Push Button Units
Cat. No. 800T-FA22A Cat. No. 800T-FB16A Cat. No. 800T-FC16F Cat. No. 800H-CRA22A

Contact Arrangement
Button Position: Button Type/Color Booted ➍ Bootless
Upper: Flush/Green Upper: Flush/Green Upper: Flush/Green
Upper: Flush/Black Upper: Flush/Black Upper: Flush/Black
Configuration/ Lower: Extended/ Lower: Mushroom/ Lower: Extended/
Type Lower: Flush/Black Lower: Flush/Black Lower: Flush/Black
Position Red Red Red
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
1 N.O. -
800T-FA22A 800T-FB16A 800T-FC16A 800H-FRA22A 800H-CRB16A 800H-CRA22A
1 N.C.
2 N.O. -
800T-FA22F 800T-FB16F 800T-FC16F 800H-FRA22F 800H-CRB16F 800H-CRA22F
2 N.C.
No
— 800T-FA22 800T-FB16 800T-FC16 800H-FRA22 800H-CRB16 800H-CRA22
Contact
➍ Boot material is hypalon with brass thredded-insert. See page 51for additional boot materials.
37
Bulletin 800T/800H
Specialty Operators, Continued
Cluster Pilot Light Units (800T only) ➊
Color Cap Only With Lamps

Cat. No. 800T-N249 Complete Unit
Cat. No. 800T-PC416
Type 4/13
Type Lamp Volts Color Cap With Lamps Complete Unit
Cat. No. Cat. No.
2 Light Incandescent 24 AC/DC 800T-N257 800T-QC224
pecial Color LED Full Voltage 800T-N257L 800T-QCL224
ap Location
green
1 Incandescent 800T-N52 800T-PC216
4 2 red 120 AC 50/60 Hz
4 2
LED Transformer 800T-N52L 800T-PCL216
3 Light Incandescent 24 AC/DC 800T-N254 800T-QC324

white
LED Full Voltage 800T-N254L 800T-QCL324
1 1
green
4 2 4 red2 Incandescent 800T-N51 800T-PC316
4 2 120 AC 50/60 Hz
3
LED Transformer 800T-N51L 800T-PCL316
4 Light
blue 24 AC/DC
800T-N251 800T-QC424
1 Full Voltage
1
green red Incandescent
4 2 4 2
3 120 AC 50/60 Hz
800T-N50 800T-PC416
clear Transformer
Cluster Pilot Light Units

Position 2 Position 3
800T – PC 3 16 W R X R
a b c d e f g h
a c d e, f, g, h
Finger-Safe Guards Illumination Options and No. Voltage Options Color Options
Code Description of Units Full Voltage Code Color
Blank No Guards Full Voltage ➊ Code Description Blank (All 4
Standard Unit ➏
C Guards on Terminals Incandescent 06 6V AC/DC Positions)
X No Color
b Code Description 12 12V AC/DC
A Amber
2 2 Unit Cluster 24 24V AC/DC
Power Module Type 3 3 Unit Cluster Transformer B Blue
Code Description 4 4 Unit Cluster C Clear
16 120V AC 50/60 Hz
G Green
QC Full Voltage LED ➋➌➍➎
PC Transformer R Red
L2 2 Unit Cluster
W White
L3 3 Unit Cluster
L4 4 Unit Cluster
Custom Lens Caps for Cluster Pilot Lights

800T – N249 R G A W
a b c d e f
a b c, d, e, f
➊ Rated type 4/13 indoor only.
No. of Lamps/Voltage Illumination Options Code Color
➋ LEDs are available in red, green
Transformer Code Description Blank (All and amber; lens color matches LED
Standard Unit ➏
Positions) color. Exception: the white lens is
Code Description Blank Incandescent
N50 4 Lamps, 120V AC 50/60 Hz L LED ➋
A Amber supplied with an amber LED.
B Blue ➌ White lenses use amber LEDs.
N51 3 Lamps, 120V AC 50/60 Hz ➍ LEDs could be adversely affected
N52 2 Lamps, 120V AC 50/60 Hz C Clear
when used with solid-state outputs.
N249 4 Lamps, 6V AC/DC G Green ➎ 6V and 12V are positive polarity.
N250 4 Lamps, 12V AC/DC R Red 24V LEDs are bipolar.
N251 4 Lamps, 24V AC/DC W White ➏ See table above for standard unit
N252 3 Lamps, 6V AC/DC X No Color colors.
N253 3 Lamps, 12V AC/DC
38
Bulletin 800T/800H
1-2-3-4 Way Toggle Switches (800T Only)
2 Way Toggle Switch

Cat. No. 800T-T2H1EEXX
Type 4/13
Handle Position
Spring Return Operation Maintained Operation
Switch Lever
Type Movement
Cat. No. Cat. No.
Up Left Center Right Down
X — O — O
800T-T2H3EEXX 800T-T2H1EEXX
2 Way O — O — X
— X O O —
800T-T2F3DDXX 800T-T2F1DDXX
— O O X —
X O O O O
O X O O O
4 Way 800T-T4T8AAXX 800T-T4R1AAXX
O O O X O
O O O O X
e g
800T – T2 H2 E E X X
a b c d e f g
Right Left Right Left
Side Side Side Side d f
a c (cont’d) d, e, f, g d, e, f, g (cont’d)
Finger-Safe Guards Lever Movement and Function Contact Blocks Contact Blocks
Code Description Description Code Description Code Description
Blank No Guards M = Maintained
Function Blank Blank
C Guards on Terminals Type S = Spring Return
Code (all No Contacts on operator (all No Contacts on operator
b pos.) pos.)
1 M M M — Standard Sealed Switch
Operator Type
2 M M S — D 1 N.O. R 1 N.O.
Code Description
T1 1 Way Toggle 3 M S M — E 1 N.C. S 1 N.C.
4 M S S — G 1 N.O.E.M. P 1 N.O. - 1 N.C.
T2 2 Way Toggle
5 S M M —
T3 3 Way Toggle L J 1 N.C.L.B. X No Contacts in this position
6 S S M —
T4 4 Way Toggle A 1 N.O. - 1 N.C. Stackable Sealed Switch
7 S M S —
c 3 8 S S S — X No Contacts in this position 5 1 N.O.
Way 1 — M M M PenTUFF (Low Voltage) 6 1 N.C.
Lever Movement and Function 2 — M M S
Description H 1 N.O. 7 1 N.O. - 1 N.C.
3 — M S M
M = Maintained 4 — M S S U 1 N.C. X No Contacts in this position
Function S = Spring Return I 1 N.O.E.M.
Type 5 — S M M
Code N
6 — S S M Q 1 N.C.L.B. Table 1. Contact Block Code
7 — S M S F 1 N.O. - 1 N.C.
8 — S S S Contact Block Substitution
A 1 M — — —
1 M — M M
X No Contacts in this position
2 S — — — Combination Code
1 — M — — 2 M — M S Class 1, Div. 2/Zone 2
1 B 2 — S — —
Standard
3 M — S M Logic Reed
Way 1 — — M — 4 M — S S D+E A
C 2 — — S — V 1 N.O.
P 5 S — M M D+D M➊
1 — — — M W 1 N.C.
D 2 — — — S 6 S — S M E+E N
7 S — M S T 1 N.O. - 1 N.C.
1 M M — — J+D B
2 M S — — 3 8 S — S S X No Contacts in this position
E J+E C
3 S S — — Way 1 M M — M
2 M M — S ➊ XA2 and XA2R contact blocks
2 4 S M — —
3 M S — M cannot be stacked upon, but they
Way 1 — M M — can stack on other contact blocks.
4 M S — S
2 — M S —
Q 5 S M — M
F 3 — S S —
6 S S — M
4 — S M — 7 S M — S
1 — — M M 8 S S — S
2 — — M S 1 M M M M Table 2. 1-2-3-4 Way Toggle Switch Cam Targets
G 3 — — S S 2 M M M S Contact Configuration Suffix Code
2 4 — — S M 3 M M S M Position Contact/Side
Way 1 M — — M 4 M M S S
Up Left Center Right Down Right Side Left Side
H 2 M — — S 5 M S M M
O X O O O D, H, V, R, 5 —
3 S — — S R 6 M S S M
4 S — — M 7 M S M S O O O O X E, U, W, S, 6 —
1 M — M — 4 8 M S S S X O X X X J, Q —
J 2 M — S — Way 1 S M M M X X X X O G, I —
3 S — S — 2 S M M S X O O O O — E, U, W, S, 6
2 4 S — M — 3 S M S M O O O X O — D, H, V, R, 5
Way 1 — M — M 4 S M S S O X X X X — G, I
2 — M — S 5 S S M M
X X X O X — J, Q
K T 6 S S S M
3 — S — S
7 S S M S
4 — S — M
8 S S S S
39
Bulletin 800T/800H
Selector Push Button Units (800T Only)
Selector Push Button

Cat. No. 800T-K2AAXX
Type 4/13
Selector Sleeve Left Selector Sleeve Right
Contact Selector Push Button
Contact Type Color/Type
Position Button Button Button Button
Cat. No.
Free Depressed Free Depressed
1 N.O. Right O X O O
Flush/Black 800T-KE2DEXX
1 N.C. Left O O X O
O X O X
Right
2 N.O. - O O X O
2 N.C. Flush/Black 800T-K2AAXX
O X O X
Left
O O X O
O X O O
Right
2 N.O. - X O X X
2 N.C. Flush/Black 800T-KC2AAXX
O O O X
Left
X X X O
e g
800T – KD 2 G J D E
a b c d e f g
Right Left Right Left
Side Side Side Side f
d
a c d, e, f, g (cont’d)
Finger-Safe Guards Color Cap Contact Blocks
Code Description Code Color Code Description
Blank No Guards 1 Green PenTUFF (Low Voltage)
2 Black
C Guards on Terminals H 1 N.O.
6 Red
U 1 N.C.
b d, e, f, g I 1 N.O.E.M.
Cam and Head Type Contact Blocks Q 1 N.C.L.B.
Code Description F 1 N.O. - 1 N.C.
Code Description
K A Cam with Flush Operator Blank X No Contacts in this position
KA A Cam with Extended Operator (all No Contacts on operator Note: See Table 1 for Target description and Table 2 for
pos.) Contact Block Reduction Rules.
KB B Cam with Flush Operator
KC C Cam with Flush Operator Standard Class 1, Div. 2/Zone 2
KD D Cam with Flush Operator D 1 N.O. Logic Reed
E 1 N.C. V 1 N.O.
KE E Cam with Flush Operator
G 1 N.O.E.M. W 1 N.C.
Note: See Table 1 for Target description of each cam. J 1 N.C.L.B.
T 1 N.O. - 1 N.C.
A 1 N.O. - 1 N.C.
B 1 N.C.L.B. - 1 N.O.
C 1 N.C.L.B. - 1 N.C. Sealed Switch
X No Contacts in this position R 1 N.O.
Table 1. Selector Push Button Cam Targets (Note: X = Closed/O = Open) S 1 N.C.
P 1 N.O. - 1 N.C.
Sleeve Position Cam Description
KA/K KB KC KD KE Stackable Sealed Switch
5 1 N.O.
Button Button Button Button Contact Block Side 6 1 N.C.
free Pressed free Pressed Right Left Right Left Right Left Right Left Right Left 7 1 N.O. - 1 N.C.
D, H, V, D, H, V,
O O O X — — — — — — — — X No Contacts in this position
R, 5 R, 5
E, U, W, E, U, W, E, U, W, E, U, W,
O O X O — — — — — — Table 2. Contact Block Reduction Rules
S, 6 S, 6 S, 6 S, 6
E, U, W, E, U, W,
O O X X — — — — — —
S, 6
—
S, 6
— Contact Block Substitution
D, H, V, D, H, V, D, H, V, Standard
O X O O — — — — — — —
R, 5 R, 5 R, 5 Combination Substitute Code
D, H, V, D, H, V, D, H, V, D, H, V, D, H, V, D+E A
O X O X — — — — —
R, 5 R, 5 R, 5 R, 5 R, 5 D+D M➊
O X X O — — — — — — — — — —
E+E N
E, U, W,
X O X O J or Q J or Q — — — — J or Q — J or Q J+D B
S, 6
X X O O — — — — — — G or I — G or I — J+E C
X X O X G or I G or I — — — — — G or I — G or I Note: Contacts must be on same side of
E, U, W, operator to apply reduction rules.
X O X X — — — — — J or Q — J or Q —
S, 6
E, U, W, E, U, W,
➊ XA2 and XA2R contact blocks cannot be stacked
X X X O — — —
S, 6
—
S, 6
— — — — upon, but they can stack on other contact blocks.
40
Bulletin 800T/800H
Cylinder Lock Push Button Units (800T only)
Cylinder Lock Push Button Mushroom Style Cylinder Lock

Cat. No. 800T-E15A Cat. No. 800T-E15M6A
Type 4/13
Locking Standard Red Mushroom
Type of Cylinder Lock
Position Cylinder Lock ➊ Cylinder Lock ➊ ➋
Cat. No. Cat. No.
Spring Bolt — Lock can be set with key when button is in the OUT position.
Button will lock when depressed. Key removable in any position. 1 N.O. - 1 IN 800T-E15A 800T-E15M6A
N.C.
Dead Bolt A — Button can only be operated with the key in the lock. Key IN 800T-E24A 800T-E24M6A
removable in locked position only. 1 N.O. - 1 N.C. OUT 800T-E14A 800T-E14M6A
Dead Bolt B — Button can be operated with or without the key inserted in the IN 800T-E12A 800T-E12M6A
lock. Key removable in any position. 1 N.O. - 1 N.C. OUT 800T-E11A 800T-E11M6A
➊ Each device supplied with 2 keys. Replacement key part no. for statdard E158 key is X-144218.
➋ For jumbo size mushroom cap, change "M" to "J." For example, 800T-E15M6A becomes 800T-E15J6A.
Momentary Padlocking Mushroom Head Units (800T only) ➌
Padlocking Mushroom Button Padlocking Jumbo Mushroom Button

Cat. No. 800T-D6QA Cat. No. 800T-D6LQA
Type 4/13
Button Standard Size Jumbo Size
Contact Type
Color Metal Mushroom Head Metal Mushroom Head
Cat. No. ➍ Cat. No. ➍
No Contact Red 800T-D6Q 800T-D6LQ
1 N.O. Red 800T-D6QD1 800T-D6LQD1
1 N.C. Red 800T-D6QD2 800T-D6LQD2
1 N.C. - 1 N.C. Red 800T-D6QA 800T-D6LQA
➌ Allows locking in the depressed position. Will hold N.C. contacts open, but might not hold N.O. contacts closed.
➍ To order without the padlocking attachment, change "Q" to "F." For example, 800T-D6QA becomes 800T-D6FA.

41
Bulletin 800T/800H
Momentary Contact Flip Lever Operators — 800H Type 4/4X only
Flip Lever Operator Flip Lever Operator

Cat. No. 800H-WK4B Cat. No. 800H-WK61B
Hot Stamped Flip Lever

Contact Type Button Color
Legend Marking Cat. No.
START 800H-WK42
Gray
No Legend ➊ 800H-WK4
No Contacts
STOP 800H-WK61
Red ➋
No Legend ➊ 800H-WK6
START 800H-WK42A
Gray
No Legend ➊ 800H-WK4A
1 N.O. - 1 N.C.
STOP 800H-WK61A
Red ➋
No Legend ➊ 800H-WK6A
START 800H-WK42B
Gray
No Legend ➊ 800H-WK4B
2 N.O. - 2 N.C. STOP 800H-WK61B
Red ➋
No Legend ➊ 800H-WK6B
➊ Legend plate can be ordered separately. Refer to accessories section.

➋ Locking provision is supplied as standard on red units.
Momentary Wobble Stick Push Button Units — 800T Type 13 only
Wobble Stick Unit

Cat. No. 800T-M1B
Wobble Stick ➌
Contact Type
Cat. No.
No Contacts 800T-M1
1 N.O. 800T-M1D1
1 N.O. -
1 N.C. 800T-M1A
2 N.O. -
2 N.C. 800T-M1B
➌ Can be operated from any angle.

42
Bulletin 800T/800H
Break-Glass Push Button Stations (800T Only)
Complete Station
Photo Description Contact Symbol Cat. No.
1 N.O. -
1 N.C. 800T-NX114
Break-Glass Push Button Station
Red push button station in a Type 13 enclosure incorporates
either one or two snap action contact blocks, which are
operated when the small glass window is broken. Includes
STOP legend. 2 N.O. -
2 N.C. 800T-NX115
Break-Glass Push Button Station
Cat. No. 800T-NX114
Miscellaneous Kits
Description Contact Symbol Cat. No.
1 N.O. -
1 N.C. 800T-S6M
Unit Only Kit

The break-glass unit less the enclosure is available as a kit to
install into the customer’s enclosure. The kit includes the
contact unit, the hammer and chain and five extra glass discs
with one button tack. This kit does not include legend plate.
For legend plates, see page X-REF.
2 N.O. -
2 N.C. 800T-S6N
Break-Glass Kit
Cat. No. 800T-S6M
1 N.O. -
1 N.C. 800T-NXM
Replacement Snap Action Contact Block Kit

This kit is used to replace the snap action contact block.
2 N.O. -
2 N.C. 800T-NXN
Replacement Snap Action Contact Block Kit
Cat. No. 800T-NXM
Description Cat. No.
Glass Disc Kit

Each replacement kit for break-glass push button units or stations consists of six glass 800T-N28
discs and one button tack.
Glass Disc Kit

Cat. No. 800T-N28
Approximate Dimensions
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Break-Glass Station 3 13/16
(96.82) A
3 3 7/32 B
(76.2) (81.76)
F
A = 2 3/4 (69.85)
A B = 4 3/16 (106.38)
B
F = 9/16 (14.28)
43
Bulletin 800T/800H
Enclosures
Custom Built Stations (800T only)
The following information is required when Cat. No.
ordering custom built push button stations. The cat. no. used to identify custom built Bulletin
1. Cat. no. of enclosure. 800T push button stations is cat. no. listed for
2. Cat. no. of control units. enclosure only. The letter W is substituted for the
3. Legend plate cat. no. and/or marking for each letter Z and a station serial no. is added.
unit.
4. Specify vertical/horizontal mounting.
5. Specify operator mounting sequence that you
want. Including a sketch is recommended. If
information not given, standard configuration
will be used.
Enclosures Only
Surface Mount ➎ Flush Mount Pendant Type

Die Cast ➊ Sheet Metal Die Cast Face Plate One Hole in Bottom Openings in Cover
(Type 4/13) (Type 13) (Type 13) (Type 13) (Type 13)
No. of
Openings
Cat. No. 800T-2TZ Cat. No. 800T-6TJZ Cat. No. 800T-2ZT Cat. No. 800T-2PZ Cat. No. 800T-2PY
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
1 800T-1TZ ➋ — 800T-1ZT — —
2 800T-2TZ ➋ — 800T-2ZT 800T-2PZ 800T-2PY
3 800T-3TZ ➋ — 800T-3ZT 800T-3PZ 800T-3PY
4 800T-4TZ ➋ — 800T-4ZT 800T-4PZ 800T-4PY
5 — — — 800T-5PZ 800T-5PY
6➌ 800T-6TZ ➋ — 800T-6ZT 800T-6PZ 800T-6PY
6➍ 800T-6THZ 800T-6TJZ 800T-6ZTH — —
7 — — — 800T-7PZ 800T-7PY
8 — — — 800T-8PZ 800T-8PY
9 800T-9TZ 800T-9TJZ 800T-9ZT 800T-9PZ 800T-9PY
10 — — — 800T-10PZ 800T-10PY
12 800T-12TZ 800T-12TJZ 800T-12ZT — —
16 800T-16TZ 800T-16TJZ 800T-16ZT — —
20 — 800T-20TJZ — — —
25 — 800T-25TJZ — — —
Note: Enclosure and conduit dimensions are detailed on page 75.
➊ Enclosure depth will accommodate one shallow and one mini-contact block stacked.
➋ Add suffix Y to the cat. no. for yellow painted enclosure. Example: Cat. No. 800T-1TZY.
➌ One vertical row.
➍ Two vertical rows of three holes.
➎ Botton conduit entry. Grounding provision provided.
44
Bulletin 800T/800H
Type 4/4X/13, Corrosion-Resistant/Watertight/Oiltight
Custom Built Stations
The following information is required when Cat. No.
ordering custom built push button stations. The cat. no. used to identify custom built Bulletin
1. Cat. no. of enclosure. 800H push button stations is cat. no. listed for
2. Cat. no. of control units. enclosure only. The letter W is substituted for the
3. Legend plate cat. no. and/or marking for each letter Z and a station serial no. is added.
unit.
4. Specify vertical/horizontal mounting.
5. Specify operator mounting sequence that you
want. Including a sketch is recommended. If
information not given, standard configuration
will be used.
Enclosures Only
Stainless Steel Rosite Glass Polyester Fiberglass

Cat. No. 800H-2HZ4 Cat. No. 800H-2HZ4R Cat. No. 800H-2HZ4Y
Stainless Steel (#304) Rosite Glass Polyester Fiberglass ➊

No. of Knockout Conduit Hubs No. of Knockout Conduit Openings
Type 4/4X/13 Type 4/4X/13 Type 4/4X/13
Holes Holes
No. Dia. Cat. No. Cat. No. No. Dia. ➋ Cat. No.
0➌ 1 3/4" 800H-0HZ4 — 1 1 3/4" 800H-1HZ4Y
1 1 3/4" 800H-1HZ4 800H-1HZ4R 2 1 1" 800H-2HZ4Y
1 2 3/4" — 800H-1HZ4RM1 3 1 1" 800H-3HZ4Y
1 1 1" — 800H-1HZ4RM2 — — — —
2 1 3/4" 800H-2HZ4 800H-2HZ4R — — — —
2 2 3/4" 800H-2HZ4M1 800H-2HZ4RM1 — — — —
2 1 1" 800H-2HZ4M2 800H-2HZ4RM2 — — — —
3 1 3/4" 800H-3HZ4 800H-3HZ4R — — — —
3 2 3/4" 800H-3HZ4M1 800H-3HZ4RM1 — — — —
4 1 3/4" 800H-4HZ4 800H-4HZ4R — — — —
4 2 3/4" 800H-4HZ4M1 800H-4HZ4RM1 — — — —
5 1 1" 800H-5HZ4 — — — — —
6 1 1" 800H-6HZ4 800H-6HZ4R — — — —
7 1 1" 800H-7HZ4 — — — — —
8 1 1" 800H-8HZ4 — — — — —
Note: Other combinations of conduit hub sizes are available upon request. Enclosure and conduit dimensions are detailed on page 77.
➊ Extra deep. Accommodates 2 levels of stackable sealed switch contact blocks.

➋ Conduit hubs must be ordered separately. For 3/4" hub order 1490-N9. For 1" hub order 1490-N10.
➌ Identical to 800H-1HZ4 but without mounting holes.
45
Bulletin 800T/800H
Accessories
Contact Blocks
Packaged in kit form for field installation. All necessary mounting hardware is provided with each contact block kit. Contact ratings are listed on page 18.
Note: It is not recommended to mount more than four contact blocks on any one non-illuminated operator, (maximum two blocks deep). Contact blocks cannot
be stacked onto power modules, so illuminated operators are limited to two contact blocks. Sealed switch contact blocks are not stackable, and are limited to
two blocks per operator. Time delay contacts are only available as one circuit per operator.
Shallow Block PenTUFF (Low Voltage) Logic Reed Block Sealed Switch Block Stackable Sealed Switch Block
Contact Block
PenTUFF Logic Reed Sealed Stackable Sealed

Shallow Block ➊➋
No. of Contacts (Low Voltage) Block ➊➋ Block ➌ Switch Block ➌ Switch Block ➌
1 N.O. 800T-XD1 800T-XD1V 800T-XD1R 800T-XD1P 800T-XD1Y
1 N.C. 800T-XD2 800T-XD2V 800T-XD2R 800T-XD2P 800T-XD2Y
1 N.O. (Early Make) 800T-XD3 800T-XD3V — — —
1 N.C. (Late Break) 800T-XD4 800T-XD4V — — —
1 N.O. - 1 N.C. 800T-XA 800T-XAV 800T-XAR 800T-XAP 800T-XAY
2 N.O. 800T-XA2 ➍ — 800T-XA2R ➍ — 800T-XA2Y
2 N.C. 800T-XA4 — 800T-XA4R — 800T-XA4Y
1 N.C. (Late Break) 1 N.O. 800T-XA1 — — — —
1 N.C. (Late Break) 1 N.C. 800T-XA7 — — — —
Self Monitoring Contact Block Mini Block Time Delay Block MaxDuty Block
S.M.C.B. ➊➏ Mini Block ➊ Time Delay Block ➎ MaxDuty Block

No. of Contacts No. of Contacts
1 N.C. (Late Break) 1 N.O. 800T-XD5 800T-XT 800T-XD1M
(wired in series
800TC-XD4S
with 1 N.O. 1 N.C. 800T-XD6 800T-XS 800T-XD2M
monitoring contact)
1 N.C.L.B. — — 800T-XD4M
➊ Contact blocks with normally closed contacts meet direct drive positive opening standard requirements when properly fused to IEC 269-1 and 269-2. Shallow/mini
contacts: 10 A gl or N type cartridge fuse. PenTUFF contacts: 6 A gl or N type cartridge fuse.
➋ Specify Bulletin 800TC for finger-safe contact blocks. Example: Cat. No. 800T-XA becomes Cat. No. 800TC-XA.
➌ 800T operator using sealed switch and logic reed contact blocks and installed in a suitable enclosure are UL Listed as suitable for use in Class I, Division 2/Zone 2
hazardous locations.
➍ Additional contacts cannot be stacked on XA2 and XA2R contact blocks.
➎ For contact ratings, see page 18.
➏ For use with 2-position push-pull or push-pull/twist operators only. Must be mounted on the first level of the operator. The N.O. monitoring contact automatically closes
when the S.M.C.B. is properly installed onto the operator. If the S.M.C.B. is separated from the operator, the N.O. monitoring contact automatically opens.
➐
➒
Shallow Contact Block Hardware
Description Cat. No.

➐ Contact Block Mounting Screw 800T-N335
➑ Screw Retainer 800T-N336
➒ Actuator Extender 800T-N337
46
Bulletin 800T/800H
Accessories, Continued
Power Modules
Packaged in kit form for field installation. Lamps are listed on page 58.
Full Voltage Power Module Dual Input Power Modules

Cat. No. 800T-N330 Transformer Power Module Cat. No. 800T-N296 (Transformer)
Cat. No. 800T-N326 Cat. No. 800T-N290N (Diode)
Full Voltage ➍ Transformer ➍ Dual Input Kits

Voltage Cat. No. Voltage Cat. No. Type Voltage Cat. No.
6 AC/DC 800T-N330 48 AC, 50/60 Hz 800T-N325 Transformer ➊ 120 AC 800T-N296
12 AC/DC 800T-N330 120 AC, 50/60 Hz 800T-N326 Diode Type ➋ 24/120V AC/DC 800T-N290N
24 AC/DC 800T-N330 240 AC, 50/60 Hz 800T-N327 — — —
120 AC/DC 800T-N330 277V AC, 50/60 Hz 800T-N327Y — — —
240 AC/DC ➌ 800T-N331 480 AC, 50/60 Hz 800T-N328 — — —
— — 600 AC, 50/60 Hz 800T-N329 — — —
➊ Transformer type dual input provides circuit isolation via a miniature type relay. This module is used in conjunction with a 120V transformer.
➋ Diode type dual input provides circuit isolation via opposing diodes. Not recommended for use with solid-state outputs and neon indicators.
➌ 240V full voltage module contains 50% dropping resistors for use with a 120V incandescent lamp.
➍ Specify Bulletin 800TC for finger-safe power modules. Example: Cat. No. 800T-N330 becomes 800TC-N330.
Resistor Power Module Neon Power Module

Cat. No. 800T-N332 Cat. No. 800T-N333
Resistor (10% Drop) ➏ Neon ➎➏

Voltage Cat. No. Voltage Cat. No.
120 AC/DC 800T-N333
120 AC/DC 800T-N332
240 AC/DC 800T-N334
➎ Neon modules contain resistors.

➏ Specify Bulletin 800TC for finger-safe power modules. Example: Cat. No. 800T-N332 becomes 800TC-N332.
Replacement Keys for Cylinder Lock (2, 3, and 4 position) Selector Switches (800T only)
AB Cylinder Lock Key AB Cylinder Lock Key
Series Key Number Cat. No. Series Key Number Cat. No.
Option Code Option Code
Blank (standard key) D018 (standard key) X-181170 15 T112 ➑ 40269-087-01
03 D020 ➐ X-307922 16 T115 ➑ 40269-087-02
04 D025 ➐ X-307924 17 T324 ➑ 40269-087-03
05 D335 ➐ X-307925 18 T382 ➑ 40269-087-04
06 D429 ➐ X-307926 19 T404 ➑ 40269-087-05
07 D461 ➐ X-307927 20 T171 ➑ 40269-087-06
08 D111 ➐ X-307928 21 T484 ➑ 40269-087-07
09 D587 ➐ X-307929 22 T547 ➑ 40269-087-08
10 D682 ➐ X-307930 23 T569 ➑ 40269-087-09
11 D713 ➐ X-307931 24 T692 ➑ 40269-087-10
12 D900 ➐ X-307932 25 T752 ➑ 40269-087-11
13 D992 ➐ X-307933 26 T178 ➑ 40269-087-12
14 D118 ➐ X-307934 — —
➐ Uses master key DM81, AB Part Number X-433358.
➑ Uses master key 15T, AB Part Number X-433359.
47
Bulletin 800T/800H
Replacement Keys for Push Button Switches with Cylinder Locks (800T only)
Lock Key Option Code
Series Key Number Cat. No.
Spring Bolt Dead Bolt A Dead Bolt B
Blank (standard key) Blank (standard key) Blank (standard key) E158 (standard key) X-144218
44 32 20 E109 X-386233
45 33 21 E131 X-386234
46 34 22 E100 X-386235
47 35 23 E115 X-386236
48 36 24 E120 X-386237
49 37 25 E104 X-386238
50 38 26 E108 X-386239
51 39 27 E132 X-386240
52 40 28 E144 X-386241
53 41 29 E157 X-386242
54 42 30 E101 X-386243
55 43 31 E102 40274-250-01
66 61 56 E106 40274-250-07
67 62 57 E111 40274-250-02
68 63 58 E117 40274-250-14
69 64 59 E125 40274-250-21
70 65 60 E130 40274-250-26
48
Bulletin 800T/800H
Replacement Color Caps
Color caps listed below are for field replacement on installed devices or for completion of devices ordered with color caps omitted.
Push-Pull Push-Pull Push-Pull/Twist Push-Pull Jumbo Push-Pull/Twist Jumbo
Push-Pull Color Caps, Illuminated

800T/H Push-Pull/ Twist
800T Push-Pull 800H Push-Pull 800T/H Push-Pull/Twist 800T/H Push-Pull Jumbo
Color Jumbo
Amber 800T-N159A 800H-N112A 800T-N301A 800T-N209A 800T-N306A
Blue 800T-N159B 800H-N112B 800T-N301B 800T-N209B 800T-N306B
Clear 800T-N159C 800H-N112C 800T-N301C 800T-N209C 800T-N306C
Green 800T-N159G 800H-N112G 800T-N301G 800T-N209G 800T-N306G
Red 800T-N159R 800H-N112R 800T-N301R 800T-N209R 800T-N306R
White 800T-N159W 800H-N112W 800T-N301W 800T-N209W 800T-N306W
Glass Caps
Illuminated Mushroom Illuminated Jumbo Mushroom Standard Push-to-Test for Pilot Lights
800T/H Push Button Color Caps, Illuminated 800T/H Pilot Light Color Caps
Glass Caps for 800T
Push-to-Test and
Color Mushroom Jumbo Mushroom Standard ➊ Pilot Lights
Illuminated ➊
Amber 800T-N304A 800T-N305A 800T-N26A 800T-N42 800T-N22
Blue 800T-N304B 800T-N305B 800T-N26B 800T-N43 800T-N23
Clear 800T-N304C 800T-N305C 800T-N26C 800T-N45 800T-N25
Green 800T-N304G 800T-N305G 800T-N26G 800T-N41 800T-N21
Red 800T-N304R 800T-N305R 800T-N26R 800T-N40 800T-N20
White 800T-N304W 800T-N305W 800T-N26W 800T-N44 800T-N24
➊ Available in bulk quantities of 20. Add suffix (-BP) to the cat. no. and order in multiples of 20.
Plastic Mushroom Plastic Jumbo Mushroom Padlocking Metal Mushroom Metal Jumbo Mushroom
800T Push Button Color Caps, Non-Illuminated

800T Plastic 800H Plastic 800T Plastic Jumbo 800H Plastic Jumbo 800T Padlocking Metal 800T Metal Jumbo
Color Mushroom Mushroom Mushroom Mushroom Mushroom Mushroom ➋
Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
Red 800T-N246R 800H-N114A 800T-N247R 800H-N115A 800T-N311R 800T-N248R
Green 800T-N246G 800H-N114B 800T-N247G 800H-N115B 800T-N311G 800T-N248G
Black 800T-N246B 800H-N114H 800T-N247B 800H-N115H 800T-N311B 800T-N248B
Orange 800T-N246O 800H-N114F 800T-N247O 800H-N115F 800T-N311O 800T-N248O
Gray 800T-N246GR 800H-N114G 800T-N247GR 800H-N115G 800T-N311GR 800T-N248GR
Blue 800T-N246BL 800H-N114C 800T-N247BL 800H-N115C 800T-N311BL 800T-N248BL
Yellow 800T-N246Y 800H-N114E 800T-N247Y 800H-N115E 800T-N311Y 800T-N248Y
Natural — — — — — 800T-N248
White 800T-N246W 800H-N114L — 800H-N115L — —
➋ For padlocking jumbo mushroom style, change listed cat. no. from 248 to 313.
49
Bulletin 800T/800H
Replacement Color Caps - cont’d
Push-Pull Push-Pull/Twist Push-Pull Jumbo Push-Pull/Twist Jumbo
Color caps listed below are for field replacement on installed devices or for completion of devices ordered with color caps omitted.
Push-Pull Color Caps, Non-Illuminated

Color 800T/H Push-Pull 800T/H Push-Pull/Twist 800T/H Push-Pull Jumbo 800T/H Push-Pull/Twist Jumbo
Red 800T-N160A 800T-N302A 800T-N208A 800T-N307A
Green 800T-N160B 800T-N302B 800T-N208B 800T-N307B
Blue 800T-N160C 800T-N302C 800T-N208C 800T-N307C
Yellow 800T-N160E 800T-N302E 800T-N208E 800T-N307E
Orange 800T-N160F 800T-N302F 800T-N208F 800T-N307F
Gray 800T-N160G 800T-N302G 800T-N208G 800T-N307G
Black 800T-N160H 800T-N302H 800T-N208H 800T-N307H
White 800T-N160L 800T-N302L 800T-N208L 800T-N307L
Selector Switch Knobs, Illuminated
Standard Knob Knob Lever Standard Knob Knob Lever
800T Knob Type 800H Knob Type

Color Standard Knob Knob Lever Standard Knob Knob Lever
Amber 800T-N297A 800T-N298A 800H-N154A 800H-N155A
Blue 800T-N297B 800T-N298B 800H-N154B 800H-N155B
Clear 800T-N297C 800T-N298C 800H-N154C 800H-N155C
Green 800T-N297G 800T-N298G 800H-N154G 800H-N155G
Red 800T-N297R 800T-N298R 800H-N154R 800H-N155R
White 800T-N297W 800T-N298W 800H-N154W 800H-N155W
Selector Switches
Photo Description Item Color Cat. No.
Standard White 800T-N230F
standard knob lever coin slot wing lever
Knob Kit 800T-N230
800T
Knobs and Actuators for Selector Switches Knob White 800T-N231F
Selector switch knobs can be changed in the field. Lever Kit 800T-N231
Standard knob and knob levers can be ordered with Wing Gray 800T-N238
white inserts or with a packet of colored inserts which Lever Red 800T-N238A
includes one insert of each color.
Coin Black
800T-N239
Slot Only
Selector Switch, Knobs Standard
and Actuators 800H Knob White 800H-N145F
Knob
Photo Description Color Cat. No.
Red 800T-N124
Green 800T-N125
800T/H
Color Insert Kits Blue 800T-N126
Available on Selector switches with removable color
inserts. Standard knob and knob levers use the same
Yellow 800T-N127
insert. If color All is selected, a packet of color inserts
will be furnished which includes one of each color.
Color Insert kits can also be ordered with operators at White 800T-N128
no additional charge.
Orange 800T-N286
Color Insert Kits
Cat. No. 800T-N123 All 800T-N123
50
Bulletin 800T/800H
Selector Switch Knobs, Booted Non-Illuminated (800H only)
Booted Selector Switch Knob

Cat. No. 800H-NR5
Material
Ethylene ●
Insert Silicone ● Urethane ●●
Hypalon Propylene ●●
Material ➋ ➋
➋
Brass 800H-NR5 ➊ 800H-NR101 ➊ 800H-NR100 ➊ 800H-NR103 ➊
Stainless Steel 800HS-NR5 800HS-NR101 800HS-NR100 800HS-NR103
➊ Color insert packet (Cat. No. 800T-N123) is included in each kit.

➋ Dots printed on the inside of the boot identify the boot material.
Protective Boots
Protective Boot Application Information
• Hypalon (synthetic rubber)
Very resistant to attack by oxidizing chemicals such as concentrated sulfuric acid and hypochlorite solutions. Also resistant to attack by oils and performs
well in a wide range of other chemicals and solvents. Good flex and high impact resistance. This is the standard boot material supplied with 800H NEMA
Type 4/4X push buttons unless otherwise specified.
• Silicone
Superior high temperature resistance. Particularly suited for use where organic acids or vegetable oils may be present. Also superior resistance to the
effects of outdoor use, such as oxygen, ozone, and weather.
• Urethane
Excellent resistance to mechanical failure. Most durable boot material. Particularly suited for use where lubricating oils and automotive fuels may be
present. Also well-suited for outdoor use.
• Ethylene-propylene
Particularly suited for high temperature applications. Resistant to attack by many acids and alkalies, detergents, phosphate esters, ketones, alcohols,
and glycols. Outstanding service in areas with hot water and steam wash-downs.
Cat. No. 800H-N11 Cat. No. 800H-N12
Protective Boot for Illuminated Push Buttons (Type 4/13)

Description Type Cat. No.
May be added to guarded units, units without guard or Push-to-Test devices. This protective boot guards against the entrance Boot Without Guard 800H-N11
of foreign materials reaching the opening between the button and locking ring. Boot With Guard 800H-N12
51
Bulletin 800T/800H
Protective Boots, Continued

Boots supplied with control stations and components are made of a hypalon material with
brass insert ring. To order boots with silicone, urethane or ethylene-propylene material, see
table below. Material application information shown on page 51.
Protective Boot for Push Button

Cat. No. 800H-N5A
Protective Boots for Non-llluminated Push Buttons ➊

Material
Ethylene ●
Insert Silicone ● Urethane ●●
Color Hypalon Propylene ●●
Material ➋ ➋
➋
Red 800H-N5A 800H-N101R 800H-N100R 800H-N103R
Green 800H-N5B 800H-N101G 800H-N100G 800H-N103G
Brass Black 800H-N5H 800H-N101B 800H-N100B 800H-N103B
Yellow 800H-N5E 800H-N101Y 800H-N100Y —
Blue 800H-N5C 800H-N101BL 800H-N100BL —
Red 800HS-N5A 800HS-N101R 800HS-N100R 800HS-N103R
Green 800HS-N5B 800HS-N101G 800HS-N100G 800HS-N103G
Stainless Steel Black 800HS-N5H 800HS-N101B 800HS-N100B 800HS-N103B
Yellow 800HS-N5E 800HS-N101Y 800HS-N100Y —
Blue 800HS-N5C 800HS-N101BL 800HS-N100BL —
➊ May be added to flush or extended head push button units to protect against foreign materials reaching the opening between the button and the locking ring.
➋ Dots printed on the inside of the boot identify the boot material.
Push Buttons
Photo Description Cat. No.
800T/H - Mechanical Interlock

Used on momentary contact push button units. Guards
against closing the N.O. contacts of one button while 800T-N179
the other button’s N.O. contacts are closed. Buttons
remain momentary.
Mechanical Interlock
Cat. No. 800T-N179
(Operators not included)
800T
Rocker Arm Operating Lever
The rocker arm lever operates two flush head or one
flush with one extended head momentary contact push 800T-N12
button units spaced 1-27/32" center to center. Legend
plates must be ordered separately and should be
inverted 180° prior to engraving and installation.
Rocker Arm Operating Lever
Cat. No. 800T-N12
52
Bulletin 800T/800H
Miscellaneous
800T/H
Mounting Ring Wrench
This wrench will simplify tightening or loosening the octagonal
800T-N245
mounting ring used on Bulletin 800T units. This wrench is
double ended and can be used for 18 mm and 30 mm pilot light
mounting rings.
Mounting Ring Wrench
Cat. No. 800T-N245
800T/H
Jumbo Push-Pull Cap
800T-N209RE1
For use on Bulletin 800T or 800H push-pull operators. Fits on
illuminated and non-illuminated devices.
E-Stop Jumbo Push-Pull Cap

Cat. No. 800T-N209RE1
800T 800T-N300
Bonding Bracket
The bonding bracket establishes an electrical circuit between
the mounting surface and metal operator bushing for grounding
purposes; recommended for installations which require CSA
approval. Necessary mounting hardware is included. Order
800T-N300 for back-of-panel bracket. Order 800T-N300F for
front-of-panel bracket. 800T-N300F
Bonding Bracket Kit
Cat. No. 800T-N300
800T/H
Lamp Removal Tool
800E-ALR1
This tool is used for installing or replacing bayonet base type
lamps, including LEDs.
Lamp Removal Tool

Cat. No. 800E-ALR1
53
Bulletin 800T/800H
Miscellaneous, Continued
800T/H IEC Finger-Safe Terminal Guards
Snap-on accessories which provide IEC, IP2X and VGB
Cat. No. 800T- finger-safe protection.
800T-N322
N323 Single terminal guards for single circuit contact blocks, full
voltage modules, LED modules, etc.
Note: Must be ordered in multiples of 100 pieces.
Transformer covers for transformer only.
800T-N324
Cat. No. 800T-
N324 Cat. No. 800T-
N322
Multi-terminal side cover for use on single or double circuit
contact blocks. 800T-N323
IEC Finger-Safe Accessories
Gray 800T
Trim Washer
Used to mount the operator properly when a legend plate is not 800T-N292
being used.
Plastic 800H
Trim Washer
Used to mount the operator properly when a legend plate is not 800H-N148
being used.
Trim Washer Note: Must be ordered in multiples of 10 pieces.
Cat. No. 800T-N292
Metal 800T
Thrust Washer
Used to prevent rotation of operators in a keyed or notched 800T-N293
hole.
Plastic 800T
Thrust Washer
Used to prevent rotation of operators in a keyed or notched 800H-N146
hole.
Thrust Washer Note: Must be ordered in multiples of 10 pieces.
Cat. No. 800T-N293
800T
Etching Fluid 800T-N188
Used to blacken freshly engraved aluminum legend plates.
Etching Fluid
Cat. No. 800T-N188
Photo Description Color Cat. No.
Gray 800T-N1
800T/H
Closing Button
Where an enclosure or flush plate with more than the required
number of openings is used, this neat appearing button can be
supplied to close the unused openings.
Black 800T-N1B
Closing Button
Cat. No. 800T-N1
54
Bulletin 800T/800H
Locking Attachments
800T
Extended Head Push Button Padlocking Attachments
Permits locking in the depressed position. Locks the Normally Closed contact in the open 800T-N2
position.
For extended head non-illuminated momentary push buttons.
Push Button Unit with Padlocking Attachment

Cat. No. 800T-N2
(Padlock not included)
800T
Flush Head Push Button Padlocking Attachments
Permits locking in the depressed position. Locks the Normally Closed contact in the open 800T-N10
position.
For flush head push button.
Push Button Unit with Padlocking Attachment

Cat. No. 800T-N10
800T
Momentary Mushroom Padlocking Attachments
For Buuletin 800T non-illuminated momentary mushroom push button. Requires use of this
800T-N315
device is used to lock the mushroom button in a depressed position.
800T-N311 mushroom cap.
Momentary Mushroom Padlocking Attachment

Cat. No. 800T-N315
800T/H
Push-Pull Padlocking Attachment
For 2-position push-pull and push-pull/twist release illuminated and non-illuminated
operators. Use on standard head only (40 mm dia.). Locks the Normally Closed contacts
800T-N314
open only. Conversion of Normally Closed Late Break contacts to standard Normally Closed
contacts are recommended when using this accessory.
Stainless steel material.

Push-Pull Padlocking Attachment
Cat. No. 800T-N314
800T/H
Padlocking Cover
Guards against unauthorized operation for non-illuminated, standard knob selector switches
800T-N163
and potentiometers.
Padlocking Cover Stainless steel and clear plastic construction.

Cat. No. 800T-N163
55
Bulletin 800T/800H
Locking Attachments, Continued
800T/H
Padlocking Cover
Guards against unauthorized operation. For push buttons, 2-position push-pull or twist-
release units.
When applying Cat. No. 800H-N140 on 2-position maintained push-pull units, cover will
800H-N140
lock only when the button is in depressed position. Padlocking cover includes blank legend
plate for customer marking.
Note: A pre-marked legend plate is available.The words OPEN COVER TO OPERATE are
Padlocking Cover
on the front and PULL-TO-START-PUSH-TO-STOP are on the rear. To order legend
Cat. No. 800H-N140 plate only, specify Cat. No. 800H-W174L.
800T
2- and 3-Position Non-illuminated Selector Switch Padlocking Attachment —
Standard Knob 800T-NX446
Padlocking guard for 2- and 3-position selector switches with standard knob operators only.
Locks selector switch in any maintained position.
Selector Switch Unit with Padlocking Attachment

Cat. No. 800T-NX446
Position
Left 800H-N141L
Center 800H-N141C
Right 800H-N141R
800H
2- and 3-Position Selector Switch with
Padlocking Guards
Padlocking guards for 2- and 3-position selector
switches with standard knob operators only.
All 800H-N141A
Selector Switch Padlocking Guard

Cat. No. 800H-N141R (Padlock not included)
800T
4-Position Selector Switch Attachment — Standard Knob
Kit includes selector switch and guard (padlock not included). Padlocking Guard for 800T-NX446A
4-position selector switches with standard knob operators only. Locks selector switch in any
maintained position.
Cat. No. 800T-NX446A

Photo Description Position Cat. No.
For 2- and 3-Position Selector Switches
Left 800T-N316L
800T/H Center 800T-N316C
Non-Illuminated Selector Switch Padlocking Right 800T-N316R
Attachment Window Center through Right —
2-, 3-, and 4-position selector switch padlocking 800T-N316J
Prevent Left Operation
attachments. Can be used to lock operators in a
Window Center through Left —
desired position. For 3-position selector switches, 800T-N316K
Prevent Right Operation
this device can also be used to lock out a left or
right position as shown in the photo to the left. For 4-Position Selector Switches
Left (Pos.1) 800T-N317L
Stainless steel material Center Left (Pos. 2) 800T-N317CL
Non-Illuminated Selector Switch Padlocking Attachment Center Right (Pos. 3) 800T-N317CR
Cat. No. 800H-N316J (Padlock not included)
Right (Pos.4) 800T-N317R
For 2-Position Selector Switches
Left 800T-N4162L
Right 800T-N4162R
800T/H
Illuminated Selector Switch Padlocking For 3-Position Selector Switches
Attachment Left 800T-N4163L
2- and 3-position selector switch padlocking Center 800T-N4163C
attachments for illuminated selector switches.
Right 800T-N4163R
Stainless steel material Window Center through Right —
800T-N4163J
Prevent Left Operation
Illuminated Selector Switch Padlocking Attachment Window Center through Left —
800T-N4163K
Cat. No. 800H-N4162L (Padlock not included) Prevent Right Operation
56
Bulletin 800T/800H
Guards
Photo Description Type Cat. No.
1" Guard for Non-Illuminated 800T-N13
1/2" Guard for
800T-N143
Non-Illuminated
800T 1-1/2" Guard for Illuminated 800T-N93
Push Button Guards
Momentary push button guards to reduce
the risk of accidental operation. 1-1/2" Guard for Non-
Illuminated with Locking 800T-N39
Attachment
Push Button Unit with Cat. No. 800T-N13
1" (25.4 mm) Extra Long Guard
800H
Illuminated Push Button Guard
The guard provides additional protection against accidental operation of the 800H-N152
push button unit.
1-1/2" (38.1 mm) guard for illumination units.

Illuminated Push Button Unit with
Cat. No. 800H-N152 Guard
800H
Stainless Steel Guard
800H-N153
Used on non-illuminated push buttons that have protective boots as shown
on page 52.
Stainless Steel Guard

Cat. No. 800H-N153
Standard Guard 800T-N129
800T Standard Guard with Set

800T-N165
Mushroom Push Button Guards Screw
Momentary mushroom guards for standard
and jumbo mushroom push buttons. Jumbo Size Guard 800T-N151
Reduces the risk of accidental operation.
Jumbo Size Guard with Set
Standard Mushroom Push Button Unit with 800T-N154
Screw
Cat. No. 800T-N129 Guard
Photo Description Type of Finish Cat. No.
Stainless Steel 800T-N310
800T/H
Protective Guard
Protective ring for 2-position push-pull
operators. Illuminated or non-illuminated.
Often used to avoid unintentional tripping of Black 800T-NX1320
E-stop operators. This guard is used with
standard size button (40 mm dia.).
Protective Ring for 2-Position Push-Pull
Cat. No. 800T-N310 and 800T-NX1320
800T/H
Jumbo Protective Guard
Protective ring for 2-position push-pull operators. Illuminated or non- 800T-N310J
illuminated. Often used to avoid unintentional tripping of E-stop operators.
This guard is used with jumbo size button (60 mm dia.).
Protective Ring for 2-Position Push-Pull

Cat. No. 800T-N310J
800T/H
Ramp Guard
800T-N339
For Bulletin 800T/800H 2- and 3-position illuminated and non-illuminated
push-pull units. Standard size button only (40 mm dia.).
Ramp Guard
Cat. No. 800T-N339
57
Bulletin 800T/800H
Replacement Lamps
Pilot Lights, Illuminated Push Buttons, Illuminated Push-Pull, Illuminated Push-Pull/Twist to Release
Lamp Type Typical Current Lamp Voltage ANSI No. Cat. No.
150 mA 6 AC/DC 755 800T-N65 ➊
80 mA 12 AC/DC 756 800T-N141 ➊
Full Voltage 70 mA 24 AC/DC 757 800T-N157 ➊
50 mA 48 AC/DC 1835 800T-N365 ➊
22 mA 130 AC/DC 949 800T-N169 ➊
Incandescent
Transformer 150 mA 6 AC 755 800T-N65 ➊
Flashing 150 mA 6 AC 267 800T-N212 ➊
Resistor 22 mA 130 AC/DC 949 800T-N169 ➊
57 mA 24 AC/DC 24MB 800T-N180 ➊
Dual-Input Diode
21 mA 120 AC 90MB 800T-N261 ➊
Dual-Input Transformer 150 mA 6 AC 755 800T-N65 ➊
Neon — 2 mA 120 AC/DC B2A 609-N9

Lamp Type Typical Current ➋ Lamp Voltage Leakage Current Cat. No.
14 mA/48 mA 6 AC/DC 14 mA 800T-N318x ➍
13 mA/22 mA 12 AC/DC 3.5 mA 800T-N362x ➍
LED ➌ 13 mA/21 mA 24 AC/DC 3.5 mA 800T-N319x ➍
Full Voltage 12 mA/17 mA 32 AC/DC 3 mA 800T-N363x ➍
9 mA/14 mA 48 AC/DC 3 mA 800T-N364x ➍
3.3 mA/6 mA 120 AC — 800T-N320x ➍
4.5 mA/6.2 mA 130 AC/DC 2.2 mA 800T-N321x ➍
Transformer 14 mA/48 mA 6 AC 14 mA 800T-N318x ➍
Flashing 18 mA 24 AC/DC — 800T-N319Fx ➍➎
Illuminated Selector Switches

150 mA 6 AC/DC 755 800T-N65 ➊
Incandescent Full Voltage 80 mA 12 AC/DC 756 800T-N141 ➊
70 mA 24 AC/DC 757 800T-N157 ➊
14 mA/48 mA 6 AC/DC 14 mA 800T-N318x ➍
13 mA/22 mA 12 AC/DC 3.5 mA 800T-N362x ➍
LED ➌ 13 mA/21 mA 24 AC/DC 3.5 mA 800T-N319x ➍
Full Voltage 12 mA/17 mA 32 AC/DC 3 mA 800T-N363x ➍
9 mA/14 mA 48 AC/DC 3 mA 800T-N364x ➍
3.3 mA/6 mA 120 AC — 800T-N320x ➍
4.5 mA/6.2 mA 130 AC/DC 2.2 mA 800T-N321x ➍
Transformer 14 mA/48 mA 6 AC 14 mA 800T-N318x ➍
Flashing 18 mA 24 AC/DC — 800T-N319Fx ➍➎
Cluster Pilot Lights

195 mA 6 AC/DC 381 800T-N258 ➊
Incandescent Full Voltage 73 mA 12 AC/DC 382 800T-N259 ➊
37 mA 24 AC/DC 387 800T-N260 ➊
Lamp Type Typical Current Lamp Voltage Polarity Cat. No.
45 mA 6 AC/DC Positive 800T-N340x ➏
LED Full Voltage 36 mA 12 AC/DC Positive 800T-N341x ➏
14 mA 28 AC/DC Bi-Polar 800T-N80x ➏
Transformer 45 mA 6 AC Positive 800T-N340x ➏
➊ Item is sold in multiples of 5. Order quantity of 5 to receive package of 5 pieces.

➋ Typical current draw varies with LED color. The first mA value is for a green or blue LED and the second mA value is for a red or amber LED.
➌ All LEDs except 120V have an internal shunt resistor for use with solid-state outputs. LEDs will not illuminate below listed leakage current.
➍ To complete the cat. no. replace the x with the first letter of the desired color: Amber, Green, Red, Blue, or White. White LEDs only available in 6V, 24V, 120V, and 130V.
➎ Flashing rate is 2 Hz.
➏ To complete the Cat. No., replace the “x” with the first letter of the desired color: Amber, Green, or Red only.
58
Bulletin 800T/800H
Blank and Custom Legend Plates Aluminum, Type 4/13 (800T)
Blank/Custom Legend Plates
Standard Legend Plate Jumbo Legend Plate
Standard Jumbo
Color
Cat. No. Cat. No.
Gray (Blank) 800T-X559 800T-X559J
Red (Blank) 800T-X621 800T-X621J
Yellow (Blank) 800T-X679 800T-X679J
Gray (with Custom Text) 800T-X559E 800T-X559JE
Red (with Custom Text) 800T-X621E 800T-X621JE
Yellow (with Custom Text) 800T-X679E 800T-X679JE
Specialty Legend Plates
Automotive Legend Plate Half Round Legend Plate
Automotive Half Round ➊

Color
Cat. No. Cat. No.
Gray (Blank) 800T-X700 800T-X59
Red (Blank) 800T-X701 800T-X121
Gray (with Custom Text) 800T-X700E 800T-X59E
Red (with Custom Text) 800T-X701E 800T-X121E
Note: Include text with custom legends.
➊ All half round legend plates must be ordered in quantities of 25.
Custom Text Guidelines
Legend Size No. of Lines Max. No. of Characters per Line
1 Line of 14
Standard
2 Lines of 14
Jumbo 5 Lines 14
Automotive 4 Lines 20
Custom Legend Plates for 4 Way Toggle and Cluster Pilot Lights
Legend Size Cat. No. Color Text Options ➋
2 lines of up to 14 characters on top
1 line of up to 14 characters on bottom
1 vertical line of up to 7 characters on left side
Standard 800T-X619E ➌ Aluminum with Custom text 1 vertical line of up to 7 characters on right side
1 vertical line of up to 9 characters on left side
1 vertical line of up to 9 characters on right side
➋ Rule sets listed below are mutually exclusive; either one can be chosen.
➌ For blank toggle or cluster pilot legend, order 800T-X619.
59
Bulletin 800T/800H
Blank and Custom Legend Plates Aluminum, Type 4/13 (800T), Continued
Speciality Legend Plates
Cat. No. 800T-X618 Cat. No. 800T-X647Y Cat. No. 800T-X646
Start/Stop Emergency Stop

Legend Plates Legend Plates
Type
Gray Yellow Yellow (Large Size) Yellow IEC Ring
Push-to-Stop Push-to-Stop
800T-X618 800T-X618Y 800T-X647Y —
Pull-to-Start Twist or Pull Release
Blank — — 800T-X645Y 800T-X646
Custom — — 800T-X645YE —
Emergency Stop — — — 800T-X646EM
Potentiometer Legend Plates
Cat. No. 800T-X609 Cat. No. 800T-X608
Type Cat. No.

Potentiometer with Graduated Markings 800T-X609 ➊
Speed with Graduated Markings 800T-X608
➊ For graduated markings with a custom text, order 800T-X609E and specify up to two lines of text, 14 characters per line.
60
Bulletin 800T/800H
Standard Legends – Aluminum, Type 4/13 (800T)
Standard Legend Plate Jumbo Legend Plate
Standard Jumbo Standard Jumbo

Marking Marking
AUTO-OFF-HAND 800T-X501 800T-X501J ON-OFF 800T-X622 800T-X622J
AUTO-MAN-OFF 800T-X625 800T-X625J OPEN 800T-X531 800T-X531J
CLOSE 800T-X502 800T-X502J OPEN-CLOSE 800T-X532 800T-X532J
CYCLE START 800T-X562 800T-X562J OPEN-OFF-CLOSE 800T-X533 800T-X533J
DOWN 800T-X503 800T-X503J OUT 800T-X534 800T-X534J
EMERG. STOP (Yellow) 800T-X504Y — POWER ON 800T-X639 800T-X639J
EMERG. STOP (Red) ➊ 800T-X504 800T-X504J RAISE 800T-X535 800T-X535J
EMERGENCY STOP (Red) ➊ 800T-X648 800T-X648J RAISE-LOWER 800T-X536 800T-X536J
FAST 800T-X505 800T-X505J RAISE-OFF-LOWER 800T-X537 800T-X537J
FEED START 800T-X566 800T-X566J RESET 800T-X538 800T-X538J
FEED STOP 800T-X567 800T-X567J REVERSE 800T-X539 800T-X539J
FOR.-REV. 800T-X506 800T-X506J RUN 800T-X540 800T-X540J
FOR.-OFF-REV. 800T-X507 800T-X507J RUN-INCH 800T-X634 800T-X634J
FORWARD 800T-X508 800T-X508J RUN-JOG 800T-X541 800T-X541J
FOURTH SPEED 800T-X624 800T-X624J SAFE-RUN 800T-X542 800T-X542J
FULL SPEED 800T-X509 800T-X509J SECOND SPEED 800T-X543 800T-X543J
HAND-AUTO 800T-X510 800T-X510J SPEED ➋ 800T-X608 —
HAND-OFF-AUTO 800T-X511 800T-X511J SLOW 800T-X544 800T-X544J
HIGH 800T-X512 800T-X512J SLOW-FAST 800T-X545 800T-X545J
HIGH-LOW 800T-X513 800T-X513J SLOW-OFF-FAST 800T-X546 800T-X546J
HIGH-OFF-LOW 800T-X514 800T-X514J START 800T-X547 800T-X547J
IN 800T-X515 800T-X515J START-JOG 800T-X548 800T-X548J
INCH 800T-X516 800T-X516J START-STOP 800T-X549 800T-X549J
JOG 800T-X517 800T-X517J STOP (Red) 800T-X550 800T-X550J
JOG FORWARD 800T-X518 800T-X518J STOP-START 800T-X551 800T-X551J
JOG REVERSE 800T-X519 800T-X519J SUMMER-OFF-WINTER 800T-X553 800T-X553J
JOG RUN 800T-X520 800T-X520J SUMMER-WINTER 800T-X552 800T-X552J
JOG-SAFE-RUN 800T-X522 800T-X522J TEST 800T-X554 800T-X554J
JOG-STOP-RUN 800T-X521 800T-X521J THIRD SPEED 800T-X555 800T-X555J
LEFT-RIGHT 800T-X523 800T-X523J UP 800T-X556 800T-X556J
LOCAL-REMOTE 800T-X638 800T-X638J UP-DOWN 800T-X557 800T-X557J
LOW 800T-X524 800T-X524J UP-OFF-DOWN 800T-X558 800T-X558J
LOW SPEED 800T-X525 800T-X525J O (Red) 800T-X640 800T-X640J
LOWER 800T-X526 800T-X526J I 800T-X641 800T-X641J
OFF 800T-X527 800T-X527J OI 800T-X642 800T-X642J
OFF-COOLANT-ON 800T-X528 800T-X528J I O II 800T-X643 800T-X643J
OFF-ON 800T-X529 800T-X529J — — —
ON 800T-X530 800T-X530J — — —
➊ These legend plates do not comply with E-Stop standards that specify a yellow background, such as IEC 60947-5-5 and NFPA 79.
➋ Potentiometer type with graduated markings.
61
Bulletin 800T/800H
Legend Plates – Plastic, Type 4/4X/13 (800H)
Standard Legend Plate Jumbo Legend Plate Automotive Legend Plate

Cat. No. 800H-W100 Cat. No. 800H-W100J Cat. No. 800H-W100A
Blank/Custom Legend Plates Type 4/4X

Standard Jumbo Automotive
Color
Gray (Blank) 800H-W100 800H-W100J 800H-W100A
Red (Blank) 800H-W300 800H-W300J 800H-W300A
White (Blank) 800H-W500 800H-W500J 800H-W500A
Yellow (Blank) 800H-W700 800H-W700J 800H-W700A
Gray (with Custom Text) 800H-W100E 800H-W100JE 800H-W100AE
Red (with Custom Text) 800H-W300E 800H-W300JE 800H-W300AE
White (with Custom Text) 800H-W500E 800H-W500JE 800H-W500AE
Yellow (with Custom Text) 800H-W700E 800H-W700JE 800H-W700AE
Note: Include text with custom legends.
Legend Size Number of Lines Maximum Number of Characters per Line
1 Line of 13
Standard
2 Lines of 13
Jumbo 5 Lines 13
Automotive 4 Lines 16
Blank Legend Plate Potentiometer Legend Plate

Cat. No. 800H-W1 Cat. No. 800H-W080
Legend Plates — Type 4 Flip Lever ➊ Potentiometer Legends

Color Cat. No. Marking Cat. No.
White (Blank) 800H-W1 Graduated Markings Only 800H-W080
Red (Blank) 800H-W40 Speed/Graduated Markings 800H-W081
White (with Custom Text) 800H-W1E
Custom Legend with Graduated Marking 800H-W080E
Red (with Custom Text) 800H-W40E
➊ 1 line, 11 characters, maximum.
Cat. No. 800H-W196 Cat. No. 800H-W797A Cat. No. 800H-W690
Start/Stop Legend Plates Emergency Stop Legend Plates

Gray Yellow (Large Size) Yellow IEC Ring
Type
Push-to-Stop
800H-W196 800H-W797A —
Pull-to-Start
Blank — 800H-W700A 800H-W690
Custom 800H-W100E 800H-W700AE —
62
Bulletin 800T/800H
Standard Legend Plates – Plastic, Type 4/4X/13 (800H)
Gray Legend Plate White Legend Plate

Type 4/4X Type 4/4X
Gray Type 4/4X White Type 4/4X Gray Type 4/4X White Type 4/4X
Marking Marking
AUTO-OFF-HAND 800H-W154 800H-W554 LOWER 800H-W115 800H-W515
AUTO-MAN-HAND 800H-W059 800H-W459 MAN-AUTO 800H-W031 800H-W431
CLOSE 800H-W101 800H-W501 MAN-OFF-AUTO 800H-W062 800H-W462
CYCLE START 800H-W006 800H-W406 MOTOR RUN 800H-W008 800H-W408
CYCLE STOP (Red) 800H-W376 — MOTOR STOP (Red) 800H-W375 —
DECREASE 800H-W002 800H-W402 OFF 800H-W116 800H-W516
DOWN 800H-W102 800H-W502 OFF-COOLANT-ON 800H-W052 800H-W452
EMERG. STOP (Red) ➊ 800H-W372 — OFF-LOC-REMOTE 800H-W061 —
EMERGENCY STOP (Red) ➊ 800H-W373 — OFF-MAN-AUTO 800H-W060 800H-W460
FAST 800H-W104 800H-W504 OFF-ON 800H-W133 800H-W533
FEED START 800H-W007 — ON 800H-W117 800H-W517
FEED STOP (Red) 800H-W377 — OPEN 800H-W118 800H-W518
FOR.-REV 800H-W132 800H-W532 OPEN-CLOSE 800H-W134 800H-W534
FOR.-OFF-REV. 800H-W152 800H-W552 OPEN-OFF-CLOSE 800H-W153 800H-W553
FORWARD 800H-W105 800H-W505 OUT 800H-W119 800H-W519
FOURTH SPEED 800H-W010 — POWER ON 800H-W001 800H-W401
FULL SPEED 800H-W106 800H-W506 PULL-TO-START 800H-W198 —
HAND-AUTO 800H-W131 800H-W531 PUSH-TO-STOP (Red) 800H-W378 —
HAND-OFF-AUTO 800H-W151 800H-W551 RAISE 800H-W120 800H-W520
HIGH 800H-W107 800H-W507 RAISE-LOWER 800H-W034 —
HIGH-LOW 800H-W030 — RAISE-OFF-LOWER 800H-W156 800H-W556
HIGH-LOW-OFF 800H-W058 — RESET 800H-W121 800H-W521
HIGH-OFF-LOW 800H-W155 800H-W555 REVERSE 800H-W122 800H-W522
IN 800H-W108 800H-W508 RIGHT 800H-W005 800H-W405
INCH 800H-W109 800H-W509 RUN 800H-W123 800H-W523
INCREASE 800H-W003 — RUN-INCH 800H-W037 —
JOG 800H-W110 800H-W510 RUN-JOG 800H-W032 —
JOG FOR. 800H-W111 800H-W511 SAFE-RUN 800H-W033 —
JOG REV. 800H-W112 800H-W512 SECOND SPEED 800H-W124 800H-W524
JOG RUN 800H-W135 800H-W535 SLOW 800H-W125 800H-W525
JOG-SAFE-RUN 800H-W051 — SLOW-FAST 800H-W136 800H-W536
JOG-STOP-RUN 800H-W057 — SLOW-OFF-FAST 800H-W157 800H-W557
LEFT 800H-W004 800H-W404 SPEED ➋ 800H-W081 800H-W481
LEFT-RIGHT 800H-W036 — SPEED ➋ 800H-W182 —
LOC-OFF-REMOTE 800H-W055 800H-W455 START 800H-W126 800H-W526
LOW 800H-W113 800H-W513 START-JOG 800H-W138 800H-W538
LOW-HIGH 800H-W035 — START-JOG-STOP 800H-W158 800H-W558
LOW-OFF-HIGH 800H-W056 — START-RUN-STOP 800H-W054 —
LOW SPEED 800H-W114 800H-W514 START-STOP 800H-W137 800H-W537
➊ These legend plates do not comply with E-Stop standards that specify a yellow background, such as IEC 60947-5-5 and NFPA 79.
➋ Potentiometer type with graduated markings.
63
Bulletin 800T/800H
Standard Legend Plates – Plastic, Type 4/4X/13 (800H)
Gray Legend Plate White Legend Plate

Type 4/4X Type 4/4X
Gray Type 4/4X White Type 4/4X Gray Type 4/4X White Type 4/4X
Marking Marking
UP 800H-W009 800H-W409 STOP (Red) 800H-W371 —
UP-DOWN 800H-W039 — STOP-RUN-START 800H-W053 —
UP-OFF-DOWN 800H-W160 800H-W560 STOP-START 800H-W038 800H-W438
O 800H-W184 — SUMMER-OFF-WINTER 800H-W159 800H-W559
O-I 800H-W185 800H-W582 SUMMER-WINTER 800H-W139 800H-W539
I 800H-W181 800H-W581 TEST 800H-W128 800H-W528
I-O-II 800H-W183 800H-W583 THIRD SPEED 800H-W129 800H-W529
Flip Lever Legend Plates
Flip Lever Legend Plate

Type 4
Flip Lever — Type 4 Flip Lever — Type 4

Marking Marking
Cat. No. Cat. No.
CLOSE 800H-W3 OPEN 800H-W18
DOWN 800H-W5 OUT 800H-W19
EMERG. STOP (Red) 800H-W42 RAISE 800H-W20
FAST 800H-W6 RESET 800H-W21
FORWARD 800H-W7 REVERSE 800H-W22
FULL SPEED 800H-W35 RIGHT 800H-W23
HIGH 800H-W9 RUN 800H-W24
IN 800H-W10 SECOND SPEED 800H-W33
INCH 800H-W11 SLOW 800H-W26
JOG 800H-W12 START 800H-W27
LEFT 800H-W13 STOP (Red) 800H-W41
LOW 800H-W14 TEST 800H-W29
LOW SPEED 800H-W32 THIRD SPEED 800H-W34
LOWER 800H-W15 UP 800H-W30
OFF 800H-W16 O 800H-W36
ON 800H-W17 I 800H-W37
64
Bulletin 800T/800H
Approximate Dimensions and Shipping Weights
Mounting Instructions for Push Buttons with Shallow Blocks, Mini Blocks, Sketch illustrates the minimum distance
Logic Reed Blocks, Sealed Switch Blocks, and Time Delay Blocks (see
between centerlines when mounting
footnotes for exceptions)
Bulletin 800T/H controls either side by
1/ Dia. Drill side, facing each other or one above
4
(6.4) the other. When control units are
1/ Dia. Drill
9/ 1 27/32
4 mounted so that the contact block
16 (6.4)
(14.3) (46.8) terminals face each other, the 2-1/4
➋
9/ (14.3)
16 (57.2) dimension must be used in order
to get proper electrical clearance.
When control units are mounted so that
1 13/64
1 27/32 the contact block terminals do not face
1 13/64 (46.8)
(30.6)
(30.6) Dia. each other, the 1-27/32 (46.8) dimension
➊
Dia.
can be used.
➊ Change to 2-1/4 (57.2) for transformer type pilot light, push-to-test pilot lights, illuminated selector
switches and all push-pull buttons.
Note: Large legend plate requires minimum horizontal spacing of 2-15/32 (62.7).
➋ Vertical minimum spacing dimension changes for the following legend plates: Jumbo 2-15/32 (62.7); Typical Panel Cut-Out
large 2-7/16 (61.9); cluster pilot light and 2-3-4 way switches 2-1/16 (52.4).
.18
(4.6)
Panel Thickness — Kits are shipped with several 1/16 (1.58) gaskets. Refer to
table below for number of washers required for various panel thicknesses.
.09
7/64 (2.8) (12 Gauge) Thicker Than Thicker Than (2.3)
1/16 (1.6) (16 Gauge) 3/16 (4.8) Panel
9/64 (3.6) (10 Gauge) 3/16 (4.8) Panel 1/4 (6.4) Panel
Counterbore to Counterbore to
800T 3 Washers 2 Washers 1 Washer
3/16 (4.8) 3/16 (4.8)
Counterbore to
800H 4 Washers 3 Washers 2 Washer 1 Washer
1/4 (6.4)
Typical Pilot Light Wiring Diagrams

See applicable Codes and Laws
Push-to-Test Pilot Light Device Schematic Dual Input Diode Pilot Light Device Schematic
NORMAL B2 B1 NORMAL R1
(3) D1
TEST COM L2 (2)

L1 A4 A3 TEST R2
L2 D2
(1)
Dual Input Pilot Light

Typical Application Wiring Diagram
TEST L1 1CR L2
1LS
Dual Input Pilot Light
(3) Transformer Type Device Schematic
(2)
NORMAL
(1) (3)
3CR (3)
PS
(2)
(1)
TEST
2LS SOL (1)
C
(3)
(2)
(1) L2 (2)
65
Bulletin 800T/800H
Approximate Dimensions and Shipping Weights, Continued
Legend Plate Dimensions (800T only)
1 25/32 2 7/16
1 25/32 (45.2) (61.9)
(45.2)
1 9/64 1 3/4 1 39/64

(29) 1 53/64 (44.5) 2 27/64 (40.9) 2 13/32
(46.4) (61.5) (61.1)
Standard Legend Plate Jumbo Legend Plate Large Legend Plate

(Automotive Industry Type)
2 7/16
(61.9)
1 25/32
(45.2)
1 39/64
1 5/32
(40.9) 2 13/32 2 9/16 (29.4) 2 1/32
(61.1) (65.1)
(51.6)
Large Size Round Cluster Pilot Light and

Push-Pull/Twist Legend Plate Cat. No. 800T-X646 ➊ 2-3-4 Way Switch
Cat. No. 800T-X647 ➊ Silver Legend Plate
Cat. No. 800T-X619
➊ For panel mounting only. Not for use with Allen-Bradley enclosures.
Legend Plate Dimensions (800H only)

Type 4/4X
Type 4/4X Large Legend Plate
Jumbo Legend Plate (Automotive Industry Type)
Type 4/4X
Standard Legend Plate
1 53/64 2 7/16
(46.4) (61.9)
1 53/64
1 1/32 (46.4)
(26.2)
1 5/8 1 19/32
(41.3) 2 27/64 (40.5) 2 13/32
1 53/64 (61.5) (61.1)
(46.4)
Type 4/4X
Type 4/4X
Standard Legend Plate
Round
(Flip Lever Operators)
1 2/3
(42.4)
2 9/16
(65.1)
25/
64
(0.4)
Cat. No. 800H-W690
66
Bulletin 800T/800H
Blocks (800T only)
Shallow, PenTUFF, and Sealed Switch Block 2
Logic Reed Contact Blocks (50.8) Deep Tandem Mounting
Mini Contact Block
1-1/8 (28.6) Deep (2 shallow contact
7/8 (22.2) Deep
1 1/8 blocks stacked)
1 3/16 1 3/16 (28.6)
(30.2) (30.2)
1 5/8
(41.3)
1 13/16 1 13/16
(46) (46)
1 15/16 2 3/4 ➋ 3➌
(49.2) (69.9) (76.2)
1 15/
16 1 15/16 1 7/8 ➊
7/
(49.2) 8 (49.2) (47.6)
(22.2)
Stackable Sealed Switch Block
1.58 (40.1) Deep
Time Delay Contact Block (For Snap Action Contact Block
Push Buttons Only) (For Push Button Only) 1 3/16
(30.2)
2 3/4 2 11/32
(70) 2 1/32
(51.6) (59.7)
1 13/16
(46.04)
1 25/32
(45) 1 43/64
(42.4) 2 21/64
1 31/32 (59.13)
(50.0)
3 29/32
(99.22)
➊ Dimension shown is for push buttons. Selector switch dimension is 2-1/32 (51.6).
➋ Dimension shown is for push buttons. Selector switch dimension is 2-27/32 (72.2).
➌ Dimension shown is for push buttons. Selector switch dimension is 3-5/32 (80.2).
Blocks (800H only)

Mini Contact Block Sealed Switch Block
2 (50.8) Deep
1 3/16
(30.2) 1 1/8
(28.6)
1 13/16
(46.0) 1 5/8
(41.3)
1 61/64 1 15/16
7/
8 2 3/4
(49.6) (49.2)
(22.2) (69.9)
Stackable Sealed Switch Block

Shallow, PenTUFF and Logic
1.58 (40.1) Deep
Reed Contact Blocks
1 5/32 1 3/16
(29.4) (30.2)
1 13/16
1 13/16 (46.04)
(46.0)
1 61/64 2 21/64
A 1 31/32 (59.13)
(49.6) (50.0)
3 29/32
(99.22)
Dim. Momentary Push Button Maintained Push Button Selector Switch

A 2 (50.8) 2 (50.8) 1-29/32 (48.4)
Operator Extension Behind Panel — When mounted with thrust washer, trim washer or notched legend plate and correct number of rubber washers.
67
Bulletin 800T/800H
Push Buttons and Switches (800T only)
2-3-4 Way Switch Mechanically Interlocked
Maintained Contact
1/ 7 1/32
16 Push Button
(1.6) (179)
1
15°
(25)
113/16 3 5/16
1 11/16
(46) (84.1) to
(42.9)
15° 1 4 1/8
(25) to 2 1/2
(104.8)
(63.5)
2 3/32
2 11/32 3 35/64 (53.2)
(59.5) (90.1)
Shipping Wt. with 2 Contact Blocks 6 oz. (0.17 kg) 3/ (4.8)
Shipping Wt. with 4 Contact Blocks 8-1/2 oz. (0.24 kg) 16
1 7/8 15/ (11.4)
(47.6) 32
Shipping Wt. 1 lb (0.45 kg)
Push Buttons and Switches (800T only)
Flush and Extended Non-Illuminated Knob Lever and

Head Push Button Standard Knob Selector Switch
Mushroom Head Push Button
1 31/64 1 31/64
(37.7) (37.7)
1 5/8 (41.3) Dia. 1 1/4
➊ (31.8)
Extended
3/ (4.8)
16 Head Only
15/
1 1/16 1 7/32
32 (11.9) (27) (31)
Shipping Wt. 5-1/2 oz. (0.15 kg) Shipping Wt. 7-1/2 oz. (0.21 kg) Shipping Wt. 6 oz. (0.17 kg)
Illuminated Knob Lever and Standard Wing Lever Selector Switch

Knob Selector Switch
Coin Slot Selector Switch
1 3/8
(35)
2 13/16 1 31/64
2 (71.4) (37.7)
(50.8)
13/8 (35)
3/ (19)
4
1 1/4
23/
(31.8) 32
(18.3)
Shipping Wt. 8 oz. (0.22 kg) Shipping Wt. 6 oz. (0.17 kg)
➊ Except jumbo which is 2-1/4 (57.2).
68
Bulletin 800T/800H
Operator Extension in Front of Panel (800T only)
Key Operated Selector Switch

Push Button with Cylinder Lock
Wobble Stick
1 31/64 1 31/64
(37.7) (37.7)
1 31/64
(37.7)
1 1/4 1 3/16 15/ 7/ 31/4

16 8
(31.8) (30.2) (23.8) (22.2) (82.6)
Shipping Wt. 12 oz. (0.34 kg) Shipping Wt. 12 oz. (0.34 kg) Shipping Wt. 9 oz. (0.25 kg)
1 25/32
Type J Potentiometer Unit (45.2)
57/
64
(22.6)
Selector Push Button

1 53/64
1 13/16 1 3/8 (34.9) (46.4)
(46) Across
11/
Dia. 29/ Flats 16
32 (17.5)
1 31/64 (23)
(37.7)
2 15/
16
1 31/64
(50.8) (23.8) (37.7)
7/ Across
8
(22.2) Corners
69
Bulletin 800T/800H
Non-Illuminated Devices (800H only)
Bootless Flush and Extended Head Booted Flush and Extended Head
Momentary Contact Push Button Momentary Contact Push Button Standard Knob Selector Switch
Non-Illuminated
1 31/64 Across 1 3/8

(37.7) Corners (34.9)
1 3/8 (34.9) Dia. 1 31/64 Across
Across Flats (37.7) Corners
13/
64 (5.2) Extended 1 3/8 (34.9)
Head Only 3/ 1 1/4 Across Flats
1/ 4
2 (12.7) (19.1) (31.8)
Shipping Weight. 5-1/2 oz. (0.16 kg) Shipping Weight. 5-1/2 oz. (0.16 kg) Shipping Weight. 6 oz. (0.17 kg)
Bootless Maintained Contact Booted Maintained Contact

Push Buttons Push Buttons
Type J Potentiometer Unit
3 5/8
1 13/16 3 5/8
(92) to
(46) to 1 13/16
4 1/4 (92) to
2 1/2 (46) to
4 1/4
(108.0)
(63.5) 2 1/2 1 13/16 1 3/8 (34.9)
(108.0)
(63.5) (46.0) Across
Dia. 29/ Flats
32
(23.0)
2 1/8 15/
1 31/64
13/ (5.2) 16 (37.7)
64 3/ (54) (23.8)
4 Across
15/ (11.9)
32 (19.1) Corners
Shipping Weight. 1 lb (0.45 kg) Shipping Weight. 7 oz. (0.20 kg)
Type 4 Flip Lever
1 3/4
(44.5)
1 3/16 1 1/16 Mushroom Head — Maintained and Momentary
(30) (26.8)
2 3/16 15/8
(55.6) (41.3) Dia.
1 3/4
(44.5) ➊
1 13/16
(46.0) A
1 61/64 1 13/16 B 1 7/16
(49.5) (46.0) (36.5)
Shipping Weight. 8 oz. (0.14 kg) Non-Illuminated Mushroom and Push-Pull Push Buttons
Cat. No. Suffix Description Dimensions Shipping Weights
One Shallow 2-1/32
D4 A 5 oz. (0.14 kg)
Block (51.6)
Two Shallow 2-1/32
A1, A5 and A7 A 6 oz. (0.17 kg)
blocks (51.6)
Two Shallow
2-7/8
B6 Blocks and Two B 8 oz. (0.22 kg)
(73.0)
Mini Blocks
➊ Jumbo versions are 2-1/4 (57.2).
70
Bulletin 800T/800H
Pilot Light and Illuminated Devices (800T only)
Full Voltage, Neon and Dual Input Pilot Light Transformer Type Pilot Light 1 31/64
(37.7)
1 29/32 1 31/64 2 3/32

(48.4) (37.7) (55.6)
1 13/16 1 23/32
2 1/32 1 9/32 2 5/32 1 9/32
(46) (43.7)
(51.6) (32.5) (54.8) (32.5)
Dual Input Transformer Type Pilot Light
Cluster Pilot Light
2 11/32
1 7/8 1 31/64
(59.5)
(47.6) 1 31/64 (37.7)
(37.7)
2 31/64 1 9/32
1 5/8 2 7/16
1 1 45/64 (63) (32.5)
(41.3) (61.9)
(25.4) (43.2)
Shipping Wt. 12 oz. (0.34 kg)
Transformer Type Full Voltage, Neon and Dual Input Type
(Push-to-Test Pilot Light and Illuminated Push Button) (Push-to-Test Pilot Light and Illuminated Push Button)
2 1/4 2 3/16
1 31/64 1 31/64
(57.2) (55.6)
(37.7) (37.7)
1 13/16 A 1 13/16 A
(46) (46)
B 1 15/32 B 1 15/32
(37.3) (37.3)
Push-Pull and Twist or Pull Release Units
Push-Pull and Twist or Pull Release Units (Full Voltage, Neon and Dual Input
(Transformer Type Illuminated) Illuminated and All Non-Illuminated)
2 1/4 2 3/16
(57.2) 1 5/8 1 5/8
(41.3) Dia. (55.6) (41.3) Dia.
➊ ➊
1 13/16 A 1 13/16
(46) A
(46) B 1 7/16 1 7/16
(36.5) B (36.5)
➊ Jumbo mushroom versions are 2-1/4 (57.2) diameter.
Push-to-Test Pilot Lights

Non-Illuminated Push-Pull Buttons
Illuminated Push Buttons and Illuminated Push-Pull Buttons
Full Voltage or Neon
Cat. No. Transformer Type Cat. No. Transformer Type
Description Type Description
Suffix ➋ Suffix
Dim. Ship. Wt. Dim. Ship. Wt. Dim. Ship. Wt.
Transformer or
2-5/32
Terminal Module 9 oz. 2-1/32 7 oz. One Shallow 2-1/32 5 oz.
D4 A (54.8) A D4 A
and One Shallow (0.25 kg) (51.6) (0.25 kg) Contact Block (51.6) (0.14 kg)
➌
Contact Block
Transformer or
Terminal Module A4
2-7/8 10 oz. 2-7/8 8 oz. Two Shallow 2-1/32 6 oz.
A1 and A7 and One Shallow B B A5 A
(73) (0.28 kg) (73) (0.22 kg) Contact Blocks (51.6) (0.17 kg)
Block and One Mini A7
Contact Block
Transformer or
Two Shallow
AP Terminal Module
3-1/32 10 oz. 2-29/32 8 oz. Blocks and Two 2-7/8 8 oz.
D1P and One Sealed A A B6 B
(77) (0.28 kg) (73.8) (0.22 kg) Mini Contact (73) (0.22 kg)
D2P Switch Contact
Blocks
Block
➋ Applies to illuminated push-pull push buttons only.

➌ Dual input type pilot light dimension is 2-13/32 (61.1).
71
Bulletin 800T/800H
Pilot Light and Illuminated Devices, Continued (800T only)
Push Button Padlocking Cover Selector Switch and Potentiometer
(not for use with Jumbo Mushroom Head devices) Unit Padlocking Cover
2 19/64
(58.3) 25/
64 1 31/32
(9.9) (50)
2 5/32 Dia.
(54.8)
1 51/64 1 23/32 1 27/32

(45.6) (43.7) (46.8)
1/
1 27/64 64
3 3/16 (0.4) 1 29/32
(36.1)
(81) (48.4)
800H-N140 800T-N163
Protective Ring and Selector Switch Padlocking Attachment Ramp Guard for Push-Pull Illuminated
Push-Pull Illuminated or or Non-Illuminated Operators
Non-Illuminated Operators 1 5/16
(33.3) 2 3/8
1 1/2
(38.1) (60.3)
19/
32
(15.2) 1 1/2
(38.1)
5
1 55/64 (127)
(47.2)
ø 1 13/64 1 45/64
(30.5) (43.2)
2
(51)
1 7/16
(36.5)
51/
64 1 51/64
800T-N310 (20.3) (46) 800T-N339
800T-NX1320 Shipping Wt. 11oz. (0.31 kg)
Shipping Wt. 4 oz. (0.12 kg) 800T-N316
Shipping Wt. 1 oz (0.03 kg)
Push-Pull Padlocking Attachment and 1 9/64

(29.2)
Metal Mushroom Push Button Padlocking Attachment 800T-N315
1 21/64
(33.6)
800T-N314
1 21/64
(33.8)
800T-N315 1 1/2
(38.2)
800T-N314
2 1/64
(51.1)
Shipping Wt. 1.4 oz (0.04 kg)
72
Bulletin 800T/800H
Pilot Lights (800H only)
Transformer Type Pilot Light Full Voltage and Dual Input Diode Type
(Incandescent and LED) 1 19/32 Pilot Light (Incandescent, Neon, LED)
(40.5)
Dia.
2 3/32 1 29/32 1 19/32

(53.2) (50.2) (40.5) Dia.
1 13/16 2 3/32
1 23/32 (46.0) 1 9/32
(43.6) 2 7/32 1 9/32 (53.2) (32.5)
(56.35) (32.5)
Full Voltage Pilot Light
Shipping Weight. 12 oz. (0.34 kg) Shipping Weight. 5 oz. (0.14 kg)
Dual Input Transformer Type Pilot Light
2 11/32
(59.5) 1 31/64
(37.7)
2 37/64 1 9/32
1 45/64 (66.3) (32.5)
(43.3)
Shipping Weight. 14 oz. (0.40 kg)
Push-to-Test Pilot Light and Illuminated Devices (800H only)

(Transformer Type: Incandescent, LED) (Full Voltage: Incandescent, LED, Neon; and Dual Input Type)
Push-to-Test Pilot Light and Illuminated Push Button Push-to-Test Pilot Light and Illuminated Push Button
Across
2 1/4
(57.2) 1 31/64 Corners 2 3/16 1 31/64 Across
(37.7) 1 3/ (55.6) (37.7) Corners
8
(34.9) 1 3/8
Across (34.9)
Flats 1 13/16 A Across
1 13/16 A Flats
(46.0) 1 15/32 (46.0) 1 15/32
B B
(37.3) (37.3)
Momentary Mushroom, Push-Pull and Momentary Mushroom, Push-Pull and

Twist or Pull Release Units Twist or Pull Release Units
(Transformer Type: Incandescent, LED; Illuminated) (Full Voltage: Incandescent, LED, Neon;
and Dual Input Illuminated)
2 1/4
(57.2) 1 5/8
(41.3) Dia. 2 3/16 1 5/8
➊ (55.6) (41.3) Dia.
➊
1 13/16 A
(46.0) 1 7/16 1 13/16 A
B (46.0)
(36.5) 1 7/16
B (36.5)
Push-to-Test Pilot Lights: Illuminated Push Buttons, Illuminated Push-Pull and Twist or Pull Release Push Buttons
Cat. No. Transformer Type Full Voltage or Neon Type
Description
Suffix ➋ Dimension Shipping Weight Dimension Shipping Weight
Transformer or Terminal Module and One
D4 A 2-5/32 (54.8) ➌ 9 oz. (0.25 kg) A 2-1/32 (51.6) ➍ 7 oz. (0.20kg)
Shallow Contact Block
Transformer or Terminal Module, One Shallow
A1 and A7 B 2-7/8 (73) 10 oz. (0.28 kg) B 2-7/8 (73) 8 oz. (0.22 kg)
Block and One Mini Contact Block
Transformer or Terminal Module and One Sealed
AP B 2-29/32 (73.8) 10 oz. (0.28 kg) B 2-29/32 (73.8) 8 oz. (0.22 kg)
Switch Contact Block
➊ Jumbo mushroom versions are 2-1/4 (57.2).
➋ Applies to illuminated push-pull push buttons only.
➌ Dual input type pilot light dimension is 2-13/32 (61.1).
➍ Dual input type pilot light dimension is 2-9/32 (57.9).
73
Bulletin 800T/800H
Accessories
Locking Attachment for Extended, 800H-N140 Locking Cover for 2-Position

Non-Illuminated Push Buttons Non-Illuminated Maintained Twist or Pull
Release and Standard Knob Selector Switch
1 1/16 [1-5/8 (41.3) Mushroom Head only]
(27) 2 1/2 1 7/32
(63.5) (31.0)
2 19/64 Padlock
(58.3) Not Included Shackle Dia.
3/ Min.
Shackle Dia. 16
5/ Max.
3/ Min. 16
16
1/ (6.35) Max.
4
1 51/64
(45.6)
1/
1 27/64 64
Padlock Not 3 3/16 (36.1) (0.4)
Included (81.0)
Non-Illuminated Selector Switch

Padlocking Adjustment
Protective Ring for 2-Position Push-Pull/Twist

Illuminated or Non-Illuminated Operators
1 1/2
(38.1)
19/
32
(15.2) 1 1/2
(38.1)
1 55/64
(47.2)
2
(51)
1 7/16 51/
64 1 51/64
(36.5) (20.3) (46)
Push-Pull/Twist Padlocking Attachment
1 21/64
(33.6)
800T-N314
1 1/2
(38.2)
800T-N314
2 1/64
(51.1)
74
Bulletin 800T/800H
Die Cast Enclosures (800T only)
A
3 9/16
(90.5)
D
3 13/16
(96.8) 2 1/2
3 3 7/32
(63.5)
(76.2) (81.8) 1 27/32
(46.8)
B C B
1 27/32
A
(46.8)
F
F
Enclosure Dimensions Enclosure Dimensions

No. of Units No. of Units
Dim. Dim.
1 2 3 4 6 6 9 12 16
2-3/4 4-1/2 6-1/4 8 12-1/8 7-1/4 9-3/4 9-3/4 12-1/2
A A
(69.9) (114.3) (158.8) (203.2) (308) (184.2) (247.7) (247.7) (317.5)
4-3/16 5-7/8 7-9/16 9-1/2 13-1/2 9 9 11 11
B B
(106.4) (144.2) (192.1) (241.3) (342.4) (228.6) (228.6) (279.4) (279.4)
Note: Mounting holes (4) — Screw shaft 13/64 (5.16) 8-1/4 8-1/4 10-1/8 10-1/8
C
max. diameter. (209.6) (209.6) (257.2) (257.2)
5-3/8 7-7/8 7-7/8 10-5/8
D
(136.5) (200) (200) (269.9)
Note: Mounting holes (4) — Screw shaft 7/32
(5.56) max. diameter.
F Dimension
Type of Unit Dimension F
Flush Extended 15/32 (11.9)
Extended 21/32 (16.7)
Push Buttons Mushroom 1 (25.4)
Selector 7/8 (22.2)
Cylinder Lock 1-13/16 (46)
Standard 1-7/32 (30.9)
Selector Switches Cylinder Lock 2-7/16 (61.9)
Coin Slot 3/4 (19.1)
Pilot Light 1-1/8 (28.6)
Potentiometers 1-1/16 (27)
Conduit Openings
No. of Units ➊
General Class Description
1...4 6 9 12 16 20 25
Surface Mounted 3/4" 1" 1" 1" 1-1/2"
Die Cast — —
Enclosure 14 N.P.T. 11-1/2 N.P.T. 11-1/2 N.P.T. 11-1/2 N.P.T. 11-1/2 N.P.T.
➊ Number of units that can be mounted in the enclosure.
75
Bulletin 800T/800H
Enclosures, Continued (800T only)
Pendant Stations
3/
2 7/8 4 2 11/16 Sheet Metal Enclosures
(73) (19.1) (68.3)
A
D 4 7/8
(123.8)
A 21/8
(54)
1 27/32
B
(46.8) C
21/4
(57.2)
3 5/16
1 (84.1) F
(25.4)
No. of Units Dimension A Enclosure Dimensions

2 5-13/16 (147.6) No. of Units
Dim.
3 7-21/32 (194.5) 6 9 12 16 20 25
4 9-1/2 (241.3) 6-15/16 8-11/16 8-11/16 10-7/16 10-7/16 12-1/2
A
5 11-11/32 (288.1) (176.2) (220.7) (220.7) (265.1) (265.1) (317.5)
6 13-3/16 (335) 11-1/8 11-1/8 13-1/2 13-1/2 15-7/8 15-7/8
B
(282.6) (282.6) (342.9) (342.9) (403.2) (403.2)
7 15-1/32 (381.7)
10-1/2 10-1/2 12-7/8 12-7/8 15-1/4 15-1/4
8 16-7/8 (428.6) C
(266.7) (266.7) (370) (370) (387.4) (387.4)
9 18-23/32 (475.4)
5 6-3/4 6-3/4 8-1/2 8-1/2 10-1/4
10 20-9/16 (522.3) D
(127) (171.5) (171.5) (215.9) (215.9) (260.4)
Note: Mounting holes (4) — Screw shaft 7/32 (5.56) max. diameter.
F Dimension
Type of Unit Dimension F
Flush Extended 15/32 (11.9)
Extended 21/32 (16.7)
Push Buttons Mushroom 1 (25.4)
Selector 7/8 (22.2)
Cylinder Lock 1-13/16 (46)
Standard 1-7/32 (30.9)
Selector Switches Cylinder Lock 2-7/16 (61.9)
Coin Slot 3/4 (19.1)
Pilot Light 1-1/8 (28.6)
Potentiometers 1-1/16 (27)
Conduit Openings
No. of Units ➊
General Class Description
1...4 6 9 12 16 20 25
Surface Mounted
Sheet Metal None — Drilled to suit by customer.
Enclosure
No. of Units ➊
with Opening in
2...5 6...10
Pendant Type Bottom
Enclosure 1 (25.4) Conduit Hub 1-1/4 (31.8) Conduit Hub
with Opening in
1 (25.4) Conduit Hub 1-1/4 (31.8) Conduit Hub
Cover
➊ Number of units that can be mounted in the enclosure.
76
Bulletin 800T/800H
Enclosures (800H only)
3 15/32 3 13/16
(88.1) 1/ (6.4) Mtg. Holes (96.8)
4
2 1/4 3 3 31/32
3 5/8 (100.8)
(57.2) (76.2)
(92.1)
C A B
A B
1 1/8 Max.
(28.6)
1 1/8 Max.
(28.6)
1 5/16
7/ (5.6) Mtg. (33.3)
32
Holes
Type 4/4X/13 Stainless Steel Type 4/4X/13 Rosite Glass Polyester
Watertight, Oiltight, Corrosion Resistant Enclosure Watertight, Oiltight, Corrosion Resistant Enclosure
Type 4/4X/13 Stainless Steel

Dimension Number of Units
1 2 3 4 5 6 7 8
5-5/32 7 8-27/32 10-11/16 12-17/32 14-3/8 16-7/32 18-1/16
A
(131) (177.8) (224.6) (271.5) (318.3) (365.1) (412) (458.8)
6-13/32 8-1/4 10-1/8 11-31/32 14-1/32 15-7/8 17-3/4 19-19/32
B
(162.7) (209.6) (257.2) (304) (356.4) (403.2) (450.8) (497.7)
C — —
Conduit Knockout Size — —
3/4 1
Pipe Tap Size
(19.1) (25.4)
2-3/4 3-3/4 4-3/4 5-3/4 6-3/4 7-3/4 8-3/4 9-3/4
Approximate Shipping Wt. lbs (kg)
(1.3) (1.7) (2.2) (2.6) (3.1) (3.5) (4) (4.4)
Type 4/4X/13 Rosite

1 2 3 4 5 6
4-1/2 4-1/2 6-1/4 8 12-1/8 12-1/8
A
(114.3) (114.3) (158.8) (203.2) (308) (308)
7-1/32 7-1/32 8-23/32 10-21/32 14-7/8 14-7/8
B
(178.6) (178.6) (221.5) (270.7) (377.8) (377.8)
5-7/8 5-7/8 7-9/16 9-1/2 13-1/2 13-1/2
C
(149.2) (149.2) (192) (241.8) (342.9) (342.9)
Conduit Knockout Size — —
3/4 1
Pipe Tap Size
(19.1) (25.4)
2 2 2-1/2 3 4 4
(.9) (.9) (1.1) (1.4) (1.8) (1.8)
77
Bulletin 800T/800H
Enclosures, Continued (800H only)
D C
Fiberglass Type 4/4X/12/13

1 2 3
4-1/2 x 5-3/16 x 6 4-1/2 x 5-3/16 x 8 6-1/2 x 5-7/16 x 8
AxBxC
(114.3 x 131.8 x 152.4) (114.3 x 131.8 x 203.2) (165.1 x 138.1 x 203.2)
4-3/4 x 2 6-3/4 x 2 6-3/4 x 4
DxE
(120.7 x 50.8) (171.5 x 50.8) (171.5 x 101.6)
3/4 1 1
Conduit Knockout Size
(19.1) (25.4) (25.4)
2 1/4 3
(0.9) (1.0) (1.4)
78
Bulletin 800R
30.5 mm Push Button Stations Hermetically Sealed for Division 2/Zone 2
Overview/Specifications
Bulletin 800R/30.5 mm Push Button Stations Hermetically Sealed Table of Contents

for Division 2/Zone 2 Specifications . . . . . . . . . . .79
800T/H Push Button
• Hazardous Location Push Button Stations
Operators . . . . . . . . . . . . . . .17
• Classes I and II Division 2/Zone 2
• 30.5 mm Mounting Hole Stations
• Types 4/13 and 4/4X/13 Complete Assembled,
Metallic Enclosures . . . . .81
Complete Assembled, Non-
Metallic Enclosures . . . . .82
Custom Built Stations . . . . .83
Enclosures Only . . . . . . . . .83
Approximate Dimensions and
Shipping Weights . . . . . . . .84
Specifications ➊
Electrical Ratings
Contact Ratings Refer to the Contact Ratings tables below.
Dielectric Strength 2200V for one minute, 1300V for one minute (Logic Reed)
Electrical Design Life Cycles 1,000,000 at maximum rated load, 200,000 at maximum rated load (Logic Reed)
Mechanical Ratings
Vibration 10…2000 Hz 1.52mm displacement (peak-to-peak) Max./10 G Max. (except Logic Reed)
Shock 1/2 cycle sine wave for 11 milliseconds ≥ 25 G (contact fragility) and no damage at 100 G
Degree of Protection Type 4/4X/13, 4/13; Watertight/Corrosion-Resistant IEC 529 IP66/65
Mechanical Design Life Cycles
(Momentary, Non-Illuminated) 10,000,000 min.
Push Buttons (Momentary, Illuminated) 250,000 min.
(Push-Pull/Twist-to-Release) 250,000 min.
(Non-Illuminated) 1,000,000 min.
Selector Switches
(Illuminated) 200,000 min.
All other devices 200,000 min.
Contact Operation Logic Reed and Sealed Switch Contact Blocks:Single break magnetic
Typical Operating Forces
Flush, Extended, Standard Mushroom, Jumbo Plastic Mushroom: 2 lbs max.
Operators without contact blocks
Maintained Selector Switch: 3.6 in.-lbs maximum
3.6 in.-lbs to stop
Spring Return Selector Switches
0.2 in.-lbs to return
Illuminated Push Buttons and Push-to-Test Pilot Lights 5 lbs maximum
3-Position Push-Pull 8 lbs maximum push to in position or pull to center position (15 lbs maximum pull to out position)
9 lbs maximum push or pull
Push-Pull and Push-Pull/Twist
30 in.-oz. maximum twist, 6 in.-oz. minimum return
Logic Reed 1 lb maximum
Contact Blocks Sealed Switch 3 lbs maximum at 0.205" plunger travel
Stackable Sealed Switch 1 lb maximum
Environment
Operating –40...+131°F (–40...+55°C)
Temperature Range
Storage –40...+185°F (–40...+85°C)
Note: Operating temperatures below freezing are based on the
absence of moisture and liquids. Contact your local
Allen-Bradley distributor for use in lower temperature
applications.
Humidity 50% at +104°F (+40°C)
➊ Performance Data — See Industrial Controls Catalog, page Important-2.
79
Bulletin 800R
Specifications, Continued
Control Stations Sealed Switch Contact Ratings

Bulletin 800R control stations are designed for Division 2/Zone 2 hazardous Maximum continuous current Ith 5 A. Bulletin 800T and 800H units have
locations. They consist of Bulletin 800H (Type 4/4X/13) or Bulletin 800T (Type control circuit ratings with sealed switch contact blocks as follows:
4/13) operators with sealed contact blocks. Bulletin 800R units are available Max. Opertnl. Utilization Category Rated Operational Currents
as factory assembled stations or as components for field assembly. Volts Ue IEC NEMA Volts Ue Make Break
120…600 3600 VA 360 VA
Hazardous Locations AC 600 AC-15 B600
0…120 30 A 3A
Since the contacts are enclosed in a hermetically sealed chamber, the 24…300 138 VA
DC 300 DC-13 P300
contact block is suitable for use in Class I and II, Division 2/Zone 2 Groups 0…24 5.0 A
A, B, C, D, F and G hazardous locations and is listed by Underwriters
Laboratories for this class of service. Complete stations as shown on page
Stackable Sealed Switch Contact Ratings
81 can be used for Class I and II Division 2/Zone 2 applications. The Maximum continuous current Ith 2.5 A. Bulletin 800T and 800H units have
individual components shown in the 800T and 800H sections are also control circuit ratings with sealed switch contact blocks as follows:
suitable for Class I and II Division 2/Zone 2 locations providing they are Max. Opertnl. Utilization Category Rated Operational Currents
suitably mounted by the customer in an enclosure as required for the Volts Ue IEC NEMA Volts Ue Make Break
application and by applicable codes and laws. 120…300 1800 VA 180 VA
AC 300 AC-15 C300
Class I Zone 2 protection method Ex nW IIc Temp. Code T3/T6, Demko 0…120 15 A 1.5 A
24…150 69 VA
97.Y.122018 U applies to operators and contacts. DC 150 DC-13 Q150
0…24 2.5 A
Per National Electrical Code: Zone 2. In Class I, Zone 2 locations, all wiring
methods permitted for Class I, Division 2, Class I, Division 1 or Division 2, Logic Reed Contact Ratings
and Class I, Zone 0 or Zone 1 locations, including requirements for sealing, Maximum DC: 30V, 0.06 A Maximum AC: 150V, 0.15 A
shall be permitted. Should only be used with resistive loads.
Note: Allen-Bradley Logic Reed contact blocks are also listed by
Underwriters Laboratories for the Division 2/Zone 2 hazardous locations Approvals
listed above. UL Listed — File: E10314
Guide: NOIV
CSA Certified: LR11924
! CAUTION: IEC Compliance Demko 97.Y.122018 U
The complete stations and individual components listed herein are not
suitable for use in Class I and II Division 1 hazardous locations. For
Class I and II Division 1 hazardous locations, order Bulletin 800H Type 7
& 9 stations and units.
80
Bulletin 800R
Type 4/13 and 4/4X/13 for Hazardous Locations
Complete Assembled Stations, Metallic Enclosures
Class I, Division 2/Zone 2
Push button operators for Class I, Division 2/Zone 2 are offered in Bulletin 800T/H, on page 17.
Surface Mount Booted Operator Station Bootless Operator Station

Cat. No. 800R-1TA Cat. No. 800R-1HA4T Cat. No. 800R-1HA4TL
Cast Aluminum
Stainless Steel Enclosures ➋
Enclosures ➊
Contact Contact Button Button Legend
Operator Booted Bootless
Symbol Action Type Color Marking Surface Mount
Operator Station Operator Station
Momentary Flush Green START 800R-1TB 800R-1HB4T 800R-1HB4TL
One 1 N.O. -
Push 1 N.C. Momentary Extended Red STOP 800R-1TA 800R-1HA4T 800R-1HA4TL
Button
Momentary Flush Black No Legend 800R-1TX 800R-1HX4T 800R-1HX4TL
Flush Green START
Momentary 800R-2TA 800R-2HA4T 800R-2HA4TL
Two Extended Red STOP
1 N.O. -
Push 1 N.C.
Momentary No Legends 800R-2TX 800R-2HX4T 800R-2HX4TL
Button Flush Black
Momentary Flush Green START 800R-2TAR 800R-2HAR4T 800R-2HAR4TL
One 1 N.O. - Extended Red STOP
Pilot Light 1 N.C.
Two Push 120V AC Red
Buttons Each Momentary Flush Black No Legends 800R-2TXR 800R-2HXR4T 800R-2HXR4TL
Button Flush Black
Black with
3-Position Maintained Knob Lever HAND OFF AUTO 800R-R3TA — 800R-R3HA4TL
Selector 1 N.C.
Switch Black with
Maintained Knob Lever No Legend 800R-R3TX — 800R-R3HX4TL
white insert
One Push 1 N.O. - Push-Pull/

1 N.C. Maintained Red EMRG. STOP 800R-1TAM — 800R-1HAM4TL
Button Twist
Flush Green START

800R-2TAM 800R-2HAM4T 800R-2HAM4TL
Extended Red STOP
Two Push 1 N.O. -
1 N.C. Maintained
Buttons Flush Black
No Legends 800R-2TXM 800R-2HXM4T 800R-2HXM4TL
Flush Black
➊ Type 4/13
➋ Type 4/4X/13
Approximate Dimensions — Page 84
81
Bulletin 800R
Complete Assembled Stations, Non-Metallic Enclosures Type 4/4X/13
Class I, Division 2/Zone 2
Push button Operators for Class I, Division 2/Zone 2 are offered in Bulletin 800T/H, on page 17.
Booted Operator Station Bootless Operator Station

Cat. No. 800R-1HA4R Cat. No. 800R-1HA4RL
Rosite Glass Polyester Enclosures

Contact Contact Button Button Legend
Operator Booted Operator Station Bootless Operator Station
Symbol Action Type Color Marking
Cat. No. Cat. No.
Momentary Flush Green START 800R-1HB4R 800R-1HB4RL
One 1 N.O. -
Push 1 N.C. Momentary Extended Red STOP 800R-1HA4R 800R-1HA4RL
Button
Momentary Flush Black No Legend 800R-1HX4R 800R-1HX4RL
Flush Green START
Momentary 800R-2HA4R 800R-2HA4RL
Two Extended Red STOP
1 N.O. -
Push 1 N.C.
Momentary No Legends 800R-2HX4R 800R-2HX4RL
Button Flush Black
Momentary Flush Green START 800R-2HAR4R 800R-2HAR4RL
One 1 N.O. - Extended Red STOP
Pilot Light 1 N.C.
Two Push 120V AC Red
Buttons Each Momentary Flush Black No Legends 800R-2HXR4R 800R-2HXR4RL
Button Flush Black
Black with
3-Position Maintained Knob Lever HAND OFF AUTO — 800R-R3HA4RL
Selector 1 N.C.
Switch Black with
Maintained Knob Lever No Legend — 800R-R3HX4RL
white insert
One Push 1 N.O. - Push-Pull/

1 N.C. Maintained Red EMERG. STOP — 800R-1HAM4RL
Button Twist
Flush Green START

800R-2HAM4R 800R-2HAM4RL
Extended Red STOP
Two Push 1 N.O. -
1 N.C. Maintained
Buttons Flush Black
No Legends 800R-2HXM4R 800R-2HXM4RL
Flush Black
Approximate Dimensions — Page 84
82
Bulletin 800R
Enclosures
Custom Built Stations
Description Ordering Information
The tables on pages 81 and The following information is required when
82 list the most commonly used push button ordering custom built push button stations.
stations. Stations not listed in the tables may be 1. Cat. no. of enclosure.
ordered as custom built stations. 2. Cat. no. of control units.
3. Legend plate cat. no. and/or marking for
Cat. No.
each unit.
The cat. no. used to identify custom built Bulletin 4. Specify vertical or horizontal mounting.
800R push button stations, which are built at the 5. Specify desired operator mounting
factory, will be cat. nos. listed for the enclosure sequence. Inclusion of a sketch is
only, except letter W will be substituted for the recommended. If no information is given,
letter Z and with a station serial number. standard configuration will be used.
Enclosures Only
Die Cast Stainless Steel Rosite Glass Polyester Fiberglass

Cat. No. 800R-2TZ Cat. No. 800R-2HZ4 Cat. No. 800R-2HZ4R Cat. No. 800H-2HZ4Y
Die Cast Stainless Steel Rosite Glass Polyester Fiberglass ➋

Units ➊ (Type 4/13) (Type 4/4X/13) (Type 4/4X/13) (Type 4/4X/12/13)
1 800R-1TZ 800R-1HZ4 800R-1HZ4R 800H-1HZ4Y
2 800R-2TZ 800R-2HZ4 800R-2HZ4R 800H-2HZ4Y
3 800R-3TZ 800R-3HZ4 800R-3HZ4R 800H-3HZ4Y
4 800R-4TZ 800R-4HZ4 800R-4HZ4R —
5 — 800R-5HZ4 800R-5HZ4R —
6 800R-6TZ 800R-6HZ4 800R-6HZ4R —
➊ Number of units that can be mounted in enclosure.

➋ Extra deep. Accomodates two levels of stackable sealed switch contact blocks.
Note: Enclosure and conduit dimensions are detailed on page 84, except for the fiberglass enclosures which are found on page 78.
83
Bulletin 800R
Type 4/4X/13 Type 4/4X/13 Type 4/13
Stainless Steel Rosite Glass Polyester Watertight/Oiltight
Watertight/Oiltight/ Watertight/Oiltight/ Cast Aluminum
Corrosion-Resistant Enclosure Corrosion-Resistant Enclosure Enclosure
3 15/32 3 13/16 3 13/16
(88.1) (96.9) (96.9)
2 1/4 3 3 31/32 3 3 7/32
3 5/8 (76.2) (81.8)
(57.2) (76.2) (100.8)
(92)
B
C A B 1 27/32
A
21/
32
(46.8)
A B (16.7)
23/
32 Max.
(28.6) ➋
Max.
➊
21/ Max.➌
32
(16.7)
Number of Units
Dimension
1 2 3 4 5 6
Stainless Steel Type 4/4X/13 Mounting Instructions
A 5-5/32 (135) 7 (178) 8-27/32 (225) 10-11/16 (271) 12-17/32 (318) 14-3/8 (360) (for Panel Mounting)
B 6-13/32 (163) 8-1/4 (210) 10-1/8 (257) 11-31/32 (304) 14-1/32 (359) 15-7/8 (403) 2 1/4
Pipe Tap Size 3/4 1 (57.2)
Glass Polyester Type 4/4X/13 1/
4
A 4-1/2 (114) 4-1/2 (114) 6-1/4 (159) 8 (203) 12-1/8 (308) 12-1/8 (308) (6.4)
Dia. Drill ➍
B 7-1/32 (181) 7-1/32 (181) 8-23/32 (221) 10-21/32 (271) 14-7/8 (378) 14-7/8 (378)
1 27/32
C 5-7/8 (149) 5-7/8 (149) 7-9/16 (192) 9-1/2 (241) 13-1/2 (343) 13-1/2 (343) (46.8)
Pipe Tap Size 3/4 1
Minimum
Cast Aluminum Type 4/13 Spacing
9/
A 2-3/4 (69.8) 4-1/2 (114) 6-1/4 (159) 8 (203) — 12-1/8 (308) 16
(14.3) 1 13/64 Dia.
B 4-3/16 (106) 5-7/8 (149) 7-9/16 (192) 9-1/2 (241) — 13-1/2 (343) (30.5)
3/4" 1"
Conduit Opening —
14 N.P.T. 11-1/2 N.P.T.
➊ Selector switch is 1-5/32 (29.4) maximum; pilot light is 1-7/32 (31).

➋ Selector switch is 1-3/32 (27.8) maximum; pilot light is 1-5/32 (29.4) maximum.
➌ Selector switch is 1-7/32 (30.9) maximum; pilot light is 1-9/32 (32.5).
➍ Minimum vertical spacing dimension for jumbo legend plate is 2-15/32 (62.7).
Operator Extension in Front of Panel ➎

Type 4/13 and
Type 4/4X/13
Type 4/4X/13 Bootless
Booted Flush and Extended Type 4/13 and
Flush and Extended Head Push Button Type 4/13 4/4X/13
Type 4/4X/13
Head Push Button Pilot Light Standard Knob
Pilot Light
Selector Switches
1 3/8 1 31/64
1 19/32 Dia. (37.3) 1 31/64 Dia.
(34.9) (37.7)
(40.5)
Dia. 1 31/64
Extended (37.3)
Head Only
3/ (4.76)
16
23/
32 1 7/32 15/
32 1 9/32 1 7/32
(18.2) (31) (11.9) (32.5) (30.9)
➎ See pages 65…76 for additional Type 4/13 and Type 4/4X/13 outlines.
84
Bulletin 800T
18 mm Pilot Lights
Type 4/13, Watertight/Oiltight
Bulletin 800T — 18mm Pilot Lights Table of Contents

• 18 mm Mounting Hole Specifications . . . . . . . . . . .17
• Type 4/13 Watertight/Oiltight Pilot Lights
• Small Pilot Lights Standard. . . . . . . . . . . . . .86
Push-to-Test . . . . . . . . . . .86
Dual Input . . . . . . . . . . . . .86
Accessories
Legend Plates . . . . . . . . .87
Color Caps . . . . . . . . . . . .87
Guard . . . . . . . . . . . . . . . .87
Replacement Lamps . . . . . .87
Dimensions . . . . . . . . . . . . .88
Small Pilot Lights Type 4/13, Class I, Division 2
18 mm Pilot Light 18 mm Push-to-Test Pilot Light

Cat. No. 800T -PS16R Cat. No. 800T -PST16R
Pilot Light Push-To-Test ➊➋➌

Type Lamp Voltage Color
Cat. No. Cat. No.
Transformer 120 AC 50/60 Hz 800T-PS16R 800T-PST16R
Full Voltage 24 AC/DC 800T-QS24R 800T-QST24R
Incandescent 120 AC Red 800T-PSD16R —
Dual Input Diode ➊
24 AC/DC 800T-PSD24R —
Dual Input Transformer ➊ ➌ 120 AC 50/60 Hz 800T-PSDT16R —
Transformer 120 AC 50/60 Hz 800T-PSH16R 800T-PSTH16R
LED 24 AC/DC Red 800T-QSH24R 800T-QSTH24R
Full Voltage
120 AC 800T-QSH10R 800T-QSTH10R
Full Voltage Neon 120 AC/DC Amber 800T-RS10A 800T-RST10A
➊ See page 65 for Typical Wiring Diagram.

➋ Type 13 only.
➌ UL/CSA Class I, Division 2 rating not available.
85
Bulletin 800T
18 mm Pilot Lights
Small Pilot Light Type 4/13, Class I, Division 2
800T – PS D 16 R
a b c d e
a c d (cont’d)
Power Module Type Illumination Options Voltage
Code Description Transformer Neon
Transformer Code Description Code Description
PS
(or Dual Input)
Blank Incandescent 10 120V AC/DC
QS Full Voltage F Flashing Incandescent ➋ 20 240V AC/DC
RS Neon ➊ H LED ➌ Dual Input
b Full Voltage Code Description
Code Description 16 120V AC 50/60 Hz
Lamp Test Options Blank Incandescent 24 24V AC/DC ➎
Code Description F Flashing Incandescent ➋
Blank No Test Option H LED ➌
e
D Dual Input Diode Neon Lens Color
DT Dual Input Transformer Relay ➏ Code Description Plastic
T Push-to-Test ➏ Blank No Options Code Description
Dual Input Blank No Lens
Code Description A Amber
Blank Incandescent B Blue
H LED ➌ C Clear
G Green
d R Red
W White
Voltage
Transformer
Code Description
16 120V AC 50/60 Hz
26 240V AC 50/60 Hz
Full Voltage
Code Description
06 6V AC/DC
12 12V AC/DC
24 24V AC/DC
32 32V AC/DC ➍
48 48V AC/DC ➍
10 120V AC/DC ➍
13 130V AC/DC ➍
➊ Neon is only available in amber or clear.

➋ Flashing lamps are only available in 6V full voltage units and all transformer units.
➌ LEDs available in red, green, amber, blue, and white. White LEDs only available in 6V and 24V full voltage and all transformer units. LED color must match lens color,
except clear lens supplied with white LED and white lens supplied with amber LED. All LEDs except 120V have an internal shunt resistor for use with solid-state outputs.
➍ LED only.
➎ Dual input diode only.
➏ Ul/CSA Class I, Division 2 rating not available.
Accessories – Page 87 Approximate Dimensions – Page 88

Legend Plates – Page 87
86
Bulletin 800T
18 mm Pilot Lights
Accessories
Legend Plates Color Caps Guard
Type A Legend Plate Guard for Illuminated Push Buttons

Cat. No. 800T-N515 Red Color Cap Cat. No. 800T-N226
Cat. No. 800T-N122R
Description Cat.No. Color Cat. No. Description Cat. No.

Blank Red 800T-N122R Guard for Illuminated
800T-N226
Type A 800T-N515 Green 800T-N122G Push Buttons
Type B 800T-N516 Amber 800T-N122A
With Custom Marking ➊ Blue 800T-N122B
Type A with Text 800T-N515E White 800T-N122W
Type B with Text 800T-N516E Clear 800T-N122C
➊ Text must be supplied.
Legend Type Number of Lines Maximum Number of Characters

A 1 9
B 2 13
Replacement Lamps
Lamp Type Typical Current Lamp Voltage ANSI Number Cat. No.
Full Voltage/All Transformer 150/250 mA 6 AC/DC 755/1866 800T-N65
Full Voltage 80 mA 14 AC/DC 756 800T-N141
Incandescent Full Voltage 70 mA 28 AC/DC 757 800T-N157
Dual Input Diode 57 mA 24 AC/DC 24MB 800T-N180
Flashing 150 mA 6 AC/DC 267 800T-N212
Dual Input Diode 22 mA 130 AC/DC 949 800T-N169
Dual Input Transformer 150/250 mA 6 AC/DC 755/1866 800T-N65
Neon
— 2 mA 120 AC/DC B2A 609-N9
Full Voltage/All Transformer 14 mA/48 mA 6 AC/DC 3 mA 800T-N318x ➍
LED ➌ 13 mA/22 mA 12 AC/DC 3 mA 800T-N362x ➍
13 mA/21 mA 24 AC/DC 3 mA 800T-N319x ➍
12 mA/17 mA 32 AC/DC 3 mA 800T-N363x ➍
Full Voltage
9 mA/14 mA 48 AC/DC 3 mA 800T-N364x ➍
3.3 mA/6 mA 120 AC — 800T-N320x ➍
4.5 mA/6.2 mA 130 AC/DC 3 mA 800T-N321x ➍
➋ Typical current draw varies with LED color. The first mA value is for a green or blue LED and the second mA value is for a red or amber LED.
➌ All LEDs except 120V have an internal shunt resistor for use with solid-state outputs. LEDs will not Illuminate below listed leakage current.
➍ To complete the cat. no. replace the x with the first letter of the desired color: Amber, Green, Red, Blue, or White. White LEDs only available in 6V and 24V.
87
Bulletin 800T
18 mm Pilot Lights
Mounting Instructions for 18 mm Small Pilot Lights
Type A Legend Plate
Preferred Alternate
Construction Construction 11/
64
(4.4)
1/ Dia. Drill
8
Type B Legend Plate
3/ 5/ (7.9)
4 16
(19.1)
Vertical 1 13/32
Minimum (35.7)
Minimum
11/
16
(17.5) 11/
16
Dia. 1 29/64 (17.5)
Horizontal (36.9) Dia.
Minimum Minimum
Cat. No. 800T-N515 Cat. No. 800T-N516
Dimension
Device
Horizontal Vertical
800T-PS, PSD, PST, QS, 31/32 1-5/32
QST and RST (24.6) (29.4)
1-3/64 1-13/64
800T-PSDT
(26.6) (30.6)
Small Pilot Light Including Small Pilot Light Dual Input

Push-To-Test (Diode)
1 1/16 1 1/8
(26.98) (28.5)
➊
21/4 1 5/32 2 61/64 1 5/32
(51.2) (29.4) 27/ (75) (29.4) 31/
32 32
(21.4) (24.6)
Approximate Shipping Weight Approximate Shipping Weight
3 oz. (0.08 kg) 3 oz. (0.08 kg)
Legend Plate for Small Pilot Light

Type A Legend Legend Plate for Small Pilot Light
Type B Legend
61/
64
(24.2) 1 29/64
(36.9)
23/
32
(18.3) 1 9/64
29/
(29.0) 32
(23) 1 13/32
(35.7)
Cat. No. 800T-N515 Cat. No. 800T-N516

(Automotive Industry Type)
➊ Transfer dual input pilot light dimension is 2-31/32 (75.4).
88
Bulletin 800T
18 mm Pilot Lights
Notes
89
Bulletin 800T
18 mm Pilot Lights
Notes
90
Bulletin 800T
18 mm Pilot Lights
Notes
91
Bulletin 800T
18 mm Pilot Lights
Notes
92
Bulletin 800T
18 mm Pilot Lights
Notes
93
Bulletin 800T
18 mm Pilot Lights
Notes
94
Allen-Bradley push button products
serve the world’s industries with
a proud tradition of quality and
rugged design. We continue to set
the standards in product value and
quality by keeping the needs of our
customers foremost in mind.
www.rockwellautomation.com
Corporate Headquarters
Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201
Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, 27/F Citicorp Centre, 18 Whitfield Road, Causeway Bay, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Headquarters for Dodge and Reliance Electric Products

Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433
Europe/Middle East/Africa: Rockwell Automation, Brühlstraße 22, D-74834 Elztal-Dallau, Germany, Tel: (49) 6261 9410, Fax: (49) 6261 17741
Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 6356-9077, Fax: (65) 6356-9011
Publication 800-SG001C-EN-P – November 2003

Supersedes 800-SG001B-EN-P – June 2001 Copyright © 2003 Rockwell Automation, Inc. All rights reserved. Printed in USA.

Allen Bradley 800T-Catalog

Uploaded by

Copyright:

Available Formats

Allen Bradley 800T-Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Allen Bradley 800T-Catalog

Uploaded by

Copyright:

Available Formats

30mm Push Button

Innovative Designs. Time-Tested Durability. Reliable Products. These are the

Installation. Time is money. Our push

Performance. We set the standard for

Diaphragm Seal. Our exclusive, non-lubricated

Riveted Construction. Our die

Variety. With our complete line of 24 different cams and 33

Flexibility. Choose from a wide selection of insert colors for

Positive Detent. Selector

Emergency Stops. Reliability where it’s needed the

Standard Contact Blocks. These industry

Sealed Switch Contact Blocks.

Self Monitoring™ Contact Blocks –

Additional Product Features

800T MaxDuty™ Copper terminals/spanner

The 800T MaxDuty™ contact blocks are the

MaxDuty contacts can result in:

There are hundreds of special purpose operators and accessories available to

Joy Stick. Excellent for

Selector Jog. Combines a

Wobble Stick. For

Power Solutions. Power modules and

Illumination Options. Table 1 highlights the

Illuminated Operators. We offer a

Guard Rings. Protect operators

Bulletin 800T/H Push Buttons

Bulletin 800R Push Button Stations

Bulletin 800T Small Pilot Lights

Bulletin 800T/800H 30.5 mm Push Buttons Table of Contents

➊ Performance Data — See Industrial Controls Catalog, page Important-2.

Standard Contact Ratings PenTUFF  (Low Voltage) Contact Ratings

Materials Used in 800H Type 4X Operators

Type 4/13 Type 4/4X/13

120V AC Red No Legend

One Push Push-Pull/ EMERG

Flush Green START

2-Position Push-Pull 2-Position Push-Pull/Twist 2-Position Push-Pull/Twist

Operator Position Type 4/13 Type 4/4X/13

Contact Button Push-Pull/Twist Push-Pull/Twist

N.C.L.B. ➊ X O Red 800T-FX6D4 800T-FXT6D4 800H-FRXT6D4

Note: X = Closed/O = Open

Accessories — Page 46 Approximate Dimensions — Page 65

Illuminated 2-Position Push-Pull Illuminated 2-Position Push-Pull/Twist Illuminated 2-Position Push-Pull/Twist

Operator Position Type 4/13 Type 4/4X/13

Push-Pull Push-Pull/Twist Push-Pull/Twist

Note: X = Closed/O = Open

Accessories — Page 46 Approximate Dimensions — Page 65

a d (cont’d) f (cont’d) f (cont’d)

Accessories — Page 46 Approximate Dimensions — Page 65

Type 4/13 Type 4/4X/13

a e f (cont’d) AC/DC and internal shunt resistor,

Standard Knob Operator Knob Lever Operator Standard Knob Operator

Operator Type 4/13 Type 4/4X/13

M M 800T-H2 800T-H17 800H-HR2

2-Position Selector Switch Units, Non-Illuminated (800T only)

2-Position Cylinder Lock Operator

M M 800T-H31 800T-H32 800T-H33

Standard Knob Operator Knob Lever Operator Standard Knob Operator

Type 4/13 Type 4/4X/13

M M M 800T-J2 800T-J17 800H-JR2