7000dwt MPL0530-1
7000dwt MPL0530-1
7000dwt MPL0530-1
7 alarm x
indicates that as as a reaction of a critical sensor status any system will give a signal to the operator
8 Spec. Op.-Statio Hoppe
means infos will be shown at control station for tank contents
ESB
means indication in ESB room via Emergency Switchboard
9 ECR Me-SS
means indication in ECR via Main Engine Safty System
MSB
means indication in ECR via Main Switchboard
MSB/C
means indication in ECR via Main Switchboard and ECR-Console
Tenfjord
means indication in ECR via alarm panel from Tenfjord
10 W/H x
means indication in Wheelhouse via different Systems as single or common alarm
11 local x
mean indication direct at the aggregat (maker)
12 load reduction x
means ME-Safty-System reduces the ME power
13 shut down x
means ME-Safty-System makes a shut down to ME
14 stby pumps x
means a stand-by pump will be startet via pressure switch
15 alarm input x
means sensor will direct connected to the alarm- and monitoring system and will produce an alarm if signal changes to critical status
16 disturbance print x
means disturbance printer will print alarm status changings
C
means disturbance printer will print an common alarm
max. amount = 64
17 Indi. via A(T)MW x
means process values can be read via a digital display at a special Meanvalue Measuring System (Part of the alarm- and monitoring system
18 Indi. via Instr. x
means process values can be read via analogoues instruments in ECR-Console
19 Indi. Dicare-Offl. x
means these are process values witch must be given manually to the MAK-DICARE-OFFLINE-SYSTEM. The values can be read via different indicators ant different places
20 REMARKS
gives additional information about the sensor function, terminals, etc.
21 type of sensor P
means Preasure
T
means Temperature
A
means Alarm
H
means hight
L
means low
S
means
Q
means
22 binär x
binary sensor (No / Nc)
23 analog x
means analouges sensor
24 kind of signal
self explanation
25 measuring range
self explanation
26 signal dimension
self explanation
27 minimum setpoint
self explanation
28 maximum setpoint
self explanation
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
618988350.xls 3 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
gearbox thrust bearing
high high Temp. NORIS REINTJ Gear GR
1281 (A194.3) 892084 TAHH x PT 100 0~ 120 °C 100 70 x ME-SS x X55:86-88 (common alarm X55:125-127)
temperature alarm load transmiter 892084 ES box 2
reduction
crankcase high high oil mist ME-SS GR X55: 98-100 (common alarm X55:119-
1251 switch MAK QAHH x CO 0,5~25 % 2% <2 M/E x x
alarm shut down 1 121)
Yuanwa
M/E
ME lube oil circulation tank Level ng UQK- GR see abh dwg.: 0879/01-7140.02
0127 LS22183 YARD LAL x NC mm 330 Sump x AL
low level alarm switch UQK-01- 01 -C 3 LS22183
TK.
C
Yuanwa
M/E
ME lube oil circulation tank Level ng UQK-
0128 YARD LAH x NC mm 600 Sump x AL
high level alarm switch UQK-01- 01 -C
TK.
C
Yuanwa
Dirty
Dirty oil tank 501 Level ng UQK- see abh dwg.: 0879/01-7140.02
0129 LS22184 YARD LAH x NC mm oil tk. x AL
high level alarm switch UQK-01- 01 -C LS22184
501
C
Yuanwa
leak
Leak oil tank 503 Level ng UQK- see abh dwg.: 0879/01-7140.02
0130 LS22185 YARD LAH x NC mm oil tk. x AL
high level alarm switch UQK-01- 01 -C LS22185
503
C
Yuanwa
S/T
Hydr.oil storage tk. 407 Level ng UQK- see abh dwg.: 0879/01-7140.02
0131 LS22186 YARD LAL x NC mm 1350 stor. x AL
high level alarm switch UQK-01- 01 -C LS22186
Tk.
C
Yuanwa
CPP
CPP LO storage tk. 406 Level ng UQK- see abh dwg.: 0879/01-7140.02
0132 LS22187 YARD LAL x NC mm 1350 stora. x AL
high level alarm switch UQK-01- 01 -C GR LS22187
Tk.
C 3
Yuanwa sludg
Sludge oil tank 510 Level ng UQK- e oil see abh dwg.: 0879/01-7140.02
0133 LS22188 YARD LAH x NC mm x AL
High level alarm switch UQK-01- 01 -C tk. LS22188
C 510
Yuanwa sludg
200
Sludge oil tank 507 Level ng UQK- e oil see abh dwg.: 0879/01-7140.02
0134 LS22189 YARD LAH x NC mm fr x AL
High level alarm switch UQK-01- 01 -C tk. LS22189
top
C 507
Level buffer see abh dwg.: 0879/01-7140.02
0135 LS22190 Buffer tank High level alarm ELNA YARD LAH x NC mm x AL
switch tank LS22190
Yuanwa ME
ME lub. Oil storage tk.401 Level ng UQK- LO see abh dwg.: 0879/01-7140.02
0136 LS22191 YARD LAL x NC mm x AL
high level alarm switch UQK-01- 01 -C stora. LS22191
C Tk.
Relay
2440 ME LO stand-by pump start YARD EA x CO MSB x x common alarm 2440
contact
618988350.xls 4 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
ME HT cooling water outlet Temp. GR
0204 CM2211 MAK TAH x Pt100 -50~200 °C 95 82 M/E x AL x x X1 : 46-48
high temperature alarm transmiter 3
ME HT cooling water outlet
Temp. ME-SS GR X55 : 77-79 (common alarm X55 : 125-
2212 high high temperature alarm MAK TAHH x CO -50~200 °C 100 82 M/E x x
Switch 2 127)
load reduction
Yuanwa
HT
H.T.cool.water expansion Level ng UQK- GR
0206 SS2350 YARD LAL x NC mm 400 Exp. x AL x abh dwg. 0879/01-7120.02 SS2350
tank low level alarm switch UQK-01- 01 -C 3
Tank
C
X15:54-56 (Mak internal control circuit)
9403.2 freshwater preheater on/off Switch MAK S x CO 0 ~ 600 1/min 300 500 ME
Extern to preheter unit
HT cooling water pump Relay GR
2441 YARD EA x CO MSB x AL common alarm 2441
failure contact 3
618988350.xls 5 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Pressure westfali
0407 F.O. outlet pressure low 3.5 3.5-5 * * * * * * common alarm
transmiter a
fuel oil pressure at engine
Pressure GR
0401 inlet low MAK PAL x 4-20mA 0~10 kPa 1 4.3 ME x AL x analog X6 : 27/28
transmiter 3
pressure alarm
fuel oil double(indication) filter Pressure GR
0402 MAK PDAH x NC 0~0.8 kPa 0.8 <0.6 ME x AL x X6 : 34/35
high DP alarm switch 3
leakage oil niveau at engine
level GR
0403 high level MAK LAH x NC X ME x AL x X1 : 36/37
switch 3
alarm
FO
ME FO auto. Filter high diff. Pressure GR
0404 Maker PDAH x NC 0~0.8 bar 0.5 <0.3 suppl x AL x
Pressure alarm switch 3
y unit
FO
ME FO inlet high/low 145 GR
0405 switch W-M VAH x NC 0-50 cst 11 suppl x AL x
temperature alarm 105 3
y unit
FO
ME FO inlet high/low GR
0406 switch W-M VAH x NC 0-50 cst 14 8 11 suppl x AL x
viscosity alarm 3
y unit
GR
0407 by-pass filter diff.pr.alarm x AL
3
ME FO supply unit common
0407
alarm
618988350.xls 6 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
voltage fail at LT-temp. GR
0808 9751.2 MAK SA x NC - - x AL x X17.2:10/11
controller 3
GR
0809 9404 overspeed Shut down MAK SA x CO 0~600 1/min 590 500 ME x ME-SS x x X55:62-64 common alarm X55:119-121
3
voltage fail at cooling water
9771 MAK SA x NC Unit x AL x extern
preheater
9561 barring gear engaged MAK SA x NC ME x AL x
GR
0812 ME automatic shut down x NC x x AL x x common alarm from safety-system
3
GR
0813 ME emergency stop x NC x x AL x x common alarm from safety-system
3
GR
0814 ME atomatic slow down x NC x AL x x common alarm from safety-system
3
0910 ME override
* * * * * * * * * * * * * * * * * * *
09 - INDICATION
cooling water temperature HT >75°
CM2201 MAK TI x Pt100 -50~200 °C X1:58-61
at engine inlet C
cooling water temperature LT see abh dwg. 0879/01-7120.01 local
2229 YARD TI x Pt100 -40~160 °C >40°C
at cooler outlet indication
fuel oil temperature at engine
CM5201 MAK TAL x Pt100 -50~200 °C 45°C X1:54-57
inlet
fuel oil temperature at Westfali
CM5206 TI x Pt100 -50~200 °C Westfalia
viscosimeter outlet a
fuel oil viscosity at engine Westfali 11
CM5253 V x 4-20mA 0~50 cSt Westfalia
inlet a cSt
intake air pressure in engine
CM6181 MAK P local indication / U-TYPE
room
charge air pressure at engine <3.1
CM7109 MAK P x 4-20mA 0~4 bar X6:40/41
inlet 4
charge air temperature at
CM7206 MAK T local indication / Thermometer
turbine inlet
charge air diff. Pressure at
CM7307 MAK PD x 4-20mA 0~0.1 bar <0.1 X6:46-48
charge air cooler
charge air temperature at
CM7309 MAK T xNiCr-Ni mV
0~1000 °C <200 X2:31/32
charge air cooler inlet
CM9419 engine speed MAK NI x 4-20mA 0~600 500 min-1 X15:72/74
<300
CM9429 turbocharger speed MAK N x 4-20mA0~30000 min-1 X8:25/26
00
CM9509 fuel pump setting MAK GI x 0 .. 10 V 0~70 mm X15:31/32
9531 engine overload MAK SI x <n-min 0~110 % X15:24-26
618988350.xls 8 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
MBS
Pressure 5100- Gear GR
1001 A103 oil pressure low alarm Danfoss Reintjes PAL x NC 0.5~3.5 bar <1 ? x AL x x oil pressure too low
switch 2031- box 3
1DB04
MBS
oil pressure low start stand- Pressure 5100- Gear GR
2440 A105 Danfoss Reintjes PAL x NC 0.5~3.5 bar < 1.2 ? x MSB/C x start stand by pump common alm 2440
by pump switch 2031- box 3
1DB04
MBS
oil pressure low low ME shut Pressure 5100- Gear GR
A125 Danfoss Reintjes PALL x NC 0.5~3.5 bar < 0.8 ? x ME-SS x main engine shut down MAK 1163
down switch 2031- box 1
1DB04
MBS
oil pressure sufficient engine Pressure 5100- Gear
A238 Danfoss Reintjes PAL x NC 0.5~3.5 bar < 1.2 ? x engine start interlocked
start interlocked switch 2031- box
1DB04
differential pressure oil filter
Pressure VN5C. Gear GR
1005 A43.1 High diff. Pressure HYDAC Reintjes PDAH x NC delta p 5 bar >5 ? x AL x differential pressure
switch 0 box 3
alarm
differential pressure oil filter
Pressure VN5C. Gear GR
1006 A43.2 High diff. Pressure HYDAC Reintjes PDAH x NC delta p 5 bar >5 ? x AL x differential pressure
switch 0 box 3
alarm ALV
1.5
oil level controller low level Level Gear GR
1007 A57 KÜBLER VU-L Reintjes NW x NC various mm ? ? 10sec x AL x oil level too low
alarm switch box 3
SVK
GL
temperature high lub. Oil Temp. 2TP81/ > Gear GR
1008 A58.1 NORIS Reintjes TAH x Pt 100 0~120 °C ? x AL x x analog signal for control system
alarm Transmiter MX24 60°C box 3
temperature high high lub. Oil Temp. 2TP81/ > Gear GR
A58.2 NORIS Reintjes TAHH x Pt 100 0~120 °C x ME-SS x engine reducing
load reduction Transmiter MX24 65°C box 2
thrust bearing high high
Temp. >100 Gear GR
A194.3 temperature load NORIS Reintjes TAHH x Pt 100 0~120 °C x ME-SS x engine slow down or reducing/MAK 1281
Transmiter °C box 2
reduction
thrust bearing high high
Temp. >90° Gear GR
1011 A194.1 temperature high temp. NORIS Reintjes TAH x Pt 100 0~120 °C x AL x x signal for control station
Transmiter C box 3
Alarm
bearing temperature high Temp. >100 Gear GR
1012 A195.1 NORIS Reintjes TAH x Pt 100 0~120 °C x AL x x signal for control station
output shaft prop.-side alarm Transmiter °C box 3
bearing temperature high
Temp. >100 Gear GR
1013 A196.1 output shaft engine side NORIS Reintjes TAH x Pt 100 0~120 °C x AL x signal for control station
Transmiter °C box 3
alarm
bearing temperature high Temp. >100 Gear GR
1014 A197.1 NORIS Reintjes TAH x Pt 100 0~120 °C x AL x signal for control station
input shaft engine side alarm Transmiter °C box 3
bearing temperature high Temp. >100 Gear GR
1015 A198.1 NORIS Reintjes TAH x Pt 100 0~120 °C x AL x signal for control station
input shaft prop.-side alarm Transmiter °C box 3
11 - CPP PLANT
CB
1101 PRS1 wrong pitch alarm * * * * * * * * * * CEP * * * * *
P
hydraulic oil low pressure Pressure GR
1102 PRS1 Lips ASTP x ? NC ? bar ? ? x x start stand by pump common alm 2440
start stand-by pump switch 3
hydraulic oil low pressure Pressure
1103 PRS2 Lips PAL x ? NC ? bar ? ? x AL E17
alarm switch
618988350.xls 9 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
powe
Power pack tank low level Level
1104 LLS1 Lips LAL x NC r x AL
alarm switch
pack
powe
Power pack tank high Temp.
1105 TS1 Lips TAH x NC r x AL
temperature alarm switch
pack
powe
Filter clogged high diff. Pressure
1106 RFA Lips PDAH x NC r x AL
Pressure alarm switch on
pack
CPP
CPP header tank low level Level
1107 LLS2 Lips LAL x NC head x AL x
alarm switch
ern GR
1108 electric power failure Lips x NC tk. x AL x x
3
1109 leveler control failure Lips x NC x AL E16 x
Stern tube bearing S/T
Temp.
1110 T temperature aft (No.1 Lips TAH x Pt100 0-150 °C 60°C 90°C beari x AL G.L. demand, not marked in any dwg.
Transmiter
sensor) high temp. Alarm ng
Stern tube bearing S/T
Temp.
1111 T temperature aft (No.2 Lips TAH x Pt100 0-150 °C 60°C 90°C beari x AL G.L. demand, not marked in any dwg.
Transmiter
sensor) high temp. Alarm ng
sealing stern tube aft. High Level
1112 HLS1 Lips LAH x NC x x AL
level alarm switch
sealing stern tube forw. Low Level
1113 LLS4 LIPS LAL x NC x x AL
level alarm switch
stern tube header tank low Level
1114 LLS3 Lips LAL x NC x x AL
level alarm switch
CPP stand-by pump running
Contact Lips x NC ECC Stand by pump is running
indication
* * 12 - STEARING GEAR * * * * * * * * * * * * * * * * *
Pump
TEN
1
Relay Rolls- TENNF NFJ
overload pump 1 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
1
Relay Rolls- TENNF NFJ
phase failure pump 1 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
1
Relay Rolls- TENNF NFJ
power failure pump 1 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
1
Relay Rolls- TENNF NFJ
power failure control 1 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
1
Relay Rolls- TENNF NFJ
hydraulic lock pump 1 S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
618988350.xls 10 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Pump
TEN
1
Relay Rolls- TENNF NFJ
autostart pump 1 S x CO contr x stand by pump 1 is running
contact Royce JORD OR
ol
D
baox
TEN
Level Rolls- Exp. TENNF NFJ
low oil level pump 1 alarm LAL x CO ? x from alarm unit steering gear
switch Royce Tank JORD OR
D
TEN
Level Rolls- Exp. TENNF NFJ
low oil level pump 2 alarm LAL x CO ? x from alarm unit steering gear
switch Royce Tank JORD OR
D
Pump
TEN
2
Relay Rolls- TENNF NFJ
overload pump 2 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
phase failure pump 2 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
power failure control 2 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
power failure pump 2 alarm S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
hydraulic lock pump 2 S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
autostart pump 2 S x CO contr x stand by pump 2 is running
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
power failure aux. Steering S x CO contr x from alarm unit steering gear
contact Royce JORD OR
ol
D
baox
Pump
TEN
2
Relay Rolls- TENNF NFJ
steering gear failure S x CO contr x
contact Royce JORD OR
ol
D
baox
13 - DIESELGENERATOR
* * * * * * * * * * * * * * * * * * *
SET 1
618988350.xls 11 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Pressure Lindenb
1302 lube oil pressure low alarm Danfoss MBC51 PAL x NC 0.2~3.5 bar 1.5 6 DG1 x AL GR3 x pre alarm
switch erg
00
lube oil temperature high Temp. CAS18 Lindenb
1315 Danfoss TAH x NC 90~150 °C 120 70 DG1 x GR3 x
alarm switch 1 erg
Pressure Lindenb
1402 lube oil pressure low alarm Danfoss MBC51 PAL x NC 0.2~3.5 bar 1.5 6 DG2 x AL GR3 x pre alarm
switch erg
00
lube oil temperature high Temp. CAS18 Lindenb
1415 Danfoss TAH x NC 90~150 °C 120 70 DG2 x GR3 x
alarm switch 1 erg
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Pressure Lindenb
1502 lube oil pressure low alarm Danfoss MBC51 PAL x NC 0.2~3.5 bar 1.5 DG3 x AL GR3 x pre alarm
switch erg
00
lube oil temperature high Temp. CAS18 Lindenb 120°
1515 Danfoss TAH x NC 90~150 °C DG3 x GR3 x
alarm switch 1 erg C
618988350.xls 13 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
Lindenb
1512 Overspeed shut down BÖNING x NO 1/min 1725 DG3 x MSB GR3 shut down DG3
erg
Winding temperature high Temp. Lindenb 130°
1513 TAH PT100 °C DG3 x AL GR3
alarm Transmiter erg C
24V voltage failure engine Lindenb
2419 DG3 x GR3 x
control erg
1515 DG3 failure x AL GR3 common alarm
16- EMERGENCY
* * GENERATOR/SHAFT * * * * * * * * * * * * * * * * *
GENERATOR
Emergen.Gen.Set. Batt. Lindenb GR
1601 Contact LVL x NC Volt 21 E/G x AL x x
Voltage low alarm erg 3
Emergen.Gen.Set. Lub. Oil Pressure Lindenb
1602 PAL x NC bar 1.0 E/G x x x
low Press. alarm switch erg
Emergen.Gen.Set. Lub. OIL Temp. Lindenb 120°
1609 TAH x NC °C E/G x x x
high Temp. Alarm switch erg C
Emergen.Gen.Set. Cool.
Temp. Lindenb 93
1604 Water high Temp. Alarm/shut TAH x NC °C E/G x x x
switch erg /97
down
Emergen.Gen.Set. Cool . Pressure Lindenb
1609 PAL x NC bar 0.2 E/G x x x
Water low Press. Alarm switch erg
Emergen.Gen.Set. Fuel Level Lindenb
1609 LAH x NC E/G x x x
Leakage hugh level alarm switch erg
Temp. Lindenb 130°
1607 Winding temperature TAH x NC E/G x ESB AL
switch erg C
Emergency gen. MDO tank Level yuanwan UQK- on
1608 LS10172 YARD LAL x NC ? mm 1100 ? x See abh dwg. 0879/01-7130.01 LS10172
low level alarm switch g 01-C tank
1609 EG failure common alarm x AL common alarm
* * 17- SEPARATORS * * * * * * * * * * * * * * * * *
1711 17.1 HFO SEP.1
WESTF 130°
1711 PTC motor protective device x x x x x
ALIA C
WESTF
1711 pressure outlet low 1 x x x x
ALIA
WESTF
1711 88°C x x x x
temperature low ALIA
WESTF 108°
1711 temperature high x x x x
ALIA C
WESTF
1711 ejection monitoring 8A x AL x x x
ALIA
WESTF
1711 x x x x
motor protection feed pump ALIA
WESTF
1711 series mode failure x x x x
ALIA
WESTF
1711 WMS (high water content) x x x x
ALIA
WESTF
1711 emergency stop x x x x
ALIA
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
WESTF 130°
1721 PTC motor protective device x x x x x
ALIA C
WESTF
1721 pressure outlet low 1 x x x x
ALIA
WESTF
1721 88°C x x x x
temperature low ALIA
WESTF 108°
1721 temperature high x x x x
ALIA C
WESTF
1721 ejection monitoring 8A x AL x x x
ALIA
WESTF
1721 x x x x
motor protection feed pump ALIA
WESTF
1721 series mode failure x x x x
ALIA
WESTF
1721 WMS (high water content) x x x x
ALIA
WESTF
1721 emergency stop x x x x
ALIA
618988350.xls 15 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
AL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
WESTF
1741 breakover water discharge x x x x
ALIA
WESTF
1741 emergency stop x x x x
ALIA
19 - ALARMS OF
* * HYDRAULIC DECK * * * * * * * * * * * * * * * * *
WINCHES
Motor 1/2 overload contact Mariner nautic. Alarm on brigde
x
Motor 1/2 overheated Temp. Mariner TAH x PT100 nautic. Alarm on brigde
Selftension motor 1/2
contact Mariner Lal x NO nautic. Alarm on brigde
overload
x
Fan overload contact Mariner TAH x nautic. Alarm on brigde
Temp.
Oil temperature high Mariner PT100 °C 60°C
Transmiter
Level
Oil level low Mariner
Transmiter
Cooling fan termostat on/off Mariner PT100 °C 40°C
20 - BALLAST AND
REMOTE LEVEL
INDICATION SYSTEM
Level Hoope on
LI1301 Ballast tank WB111C GW HOPPE RI x 4~20mA mm
Transmiter GW tank
Level Hoope on
LI1300 Ballast tank WB112C GW HOPPE RI x 4~20mA mm
Transmiter GW tank
Level Hoope on
LI1299 Ballast tank WB114 KS HOPPE RI x 4~20mA mm
Transmiter KS tank
Level Hoope on
ship office(HOPPE)
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
panel in W/H
Transmiter CB20 tank
Level Hoope on
DM1312 MID Draught CB20 HOPPE RI x 4~20mA mm
Transmiter CB21 tank
Level Hoope on
DM1313 FWD Draught CB20 HOPPE RI x 4~20mA mm
Transmiter CB22 tank
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
HFO storage tank 201
Level LAH on
2133 LI20166 level indication and HOPPE HOPPE x 4~20mA mm 75% 2133 see abh dwg. 0879/01-7230.02
transmiter RI tank
high level alarm
HFO storage tank 202 yuanwng
Level UQK- on
2133 SS20122 high high level UQK- YARD LAHH x NC mm 98% 2133 see abh dwg. 0879/01-7230.02
switch 01-C tank
alarm 01-C
panel in ECR
HFO storage tank 202
Level LAH on
2133 LI20167 level indication and HOPPE HOPPE x 4~20mA mm 75% 2133 see abh dwg. 0879/01-7230.02
transmiter RI tank
high level alarm
HFO storage tank 203 yuanwng
Level UQK- on
2133 SS20110 high high level UQK- YARD LAHH x NC mm 98% 2133 see abh dwg. 0879/01-7230.02
switch 01-C tank
alarm 01-C
HFO storage tank 203
Level LAH on
2133 LI20162 level indication HOPPE HOPPE x 4~20mA mm 75% 2133 see abh dwg. 0879/01-7230.02
transmiter RI tank
and high level alarm
HFO storage tank 204 yuanwng
Level UQK- on
2133 SS20101 high high level UQK- YARD LAHH x NC mm 98% 2133 see abh dwg. 0879/01-7230.02
switch 01-C tank
alarm 01-C
HFO storage tank 204
Level LAH on
2133 LI20163 level indication HOPPE HOPPE x 4~20mA mm 75% ? 2133 see abh dwg. 0879/01-7230.02
transmiter RI tank
and high level alarm
HFO settling tank 205 LAL 5%
Level on
2133 LI20161 high & low level HOPPE HOPPE LAH x 4~20mA mm 70 2133 see abh dwg. 0879/01-7230.02
transmiter tank
alarm and level indiction RLI 95%
HFO settling tank 205 5%
Temp. on
2133 TT Temperature HOPPE HOPPE RTI x pt100 °C 70 see abh dwg. 0879/01-7230.02
transmiter 30% tank
indication 95%
HFO service tank 206 V
Level LAL on
2318 LI20160 low level alarm HOPPE HOPPE x 4~20mA mm 1600 full x AL see abh dwg. 0879/01-7230.02
transmiter RLI tank
and level indication
HFO service tank 206
Temp. on
2133 TT Temperature HOPPE HOPPE RTI x pt100 °C 95 see abh dwg. 0879/01-7230.02
transmiter 30% tank
indication
V
HFO settling tank 207 LAL
Level on
2133 LI20161 high & low level HOPPE HOPPE LAH x 4~20mA mm 2133 see abh dwg. 0879/01-7230.02
transmiter 95% tank
alarm and level indication RLI
V
HFO settling tank 207
Temp. on
2133 TT Temperature HOPPE HOPPE RTI x pt100 °C 70 see abh dwg. 0879/01-7230.02
transmiter tank
indication
yuanwng
HFO overflow tank 208 Level UQK- 33% on
2115 SS20128 UQK- YARD LAH x NC mm 0 2133 AL x see abh dwg. 0879/01-7230.02
high level alarm switch 01-C V tank
01-C
yuanwng
HFO overflow tank 209 Level UQK- 33% on
2116 SS20118 UQK- YARD LAH x NC mm 0 2133 AL x see abh dwg. 0879/01-7230.02
high level alarm switch 01-C V tank
01-C
HFO overflow collecting pipe
Level on
2117 SS20113 (E/R) high ELNA ELNA LAH x NC mm 0 x AL see abh dwg. 0879/01-7230.02
switch tank
level alarm
HFO overflow collecting pipe
Level on panel in ECR
2118 SS20129 (FWD) ELNA ELNA LAH x NC mm 0 x AL see abh dwg. 0879/01-7230.02
switch tank
high level alarm
MDO storage/settling tank yuanwng
Level UQK- 90% on
2133 SS20125 211 high UQK- YARD LAHH x NC mm 2133 see abh dwg. 0879/01-7230.02
switch 01-C V tank
high level alarm 01-C
618988350.xls 18 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
ECR
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
Op.
spec.in
panel
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
MDO storage/settling tank
211 level Level LAH 75% on
2133 LI20168 HOPPE HOPPE x 4~20mA mm ? 2133 see abh dwg. 0879/01-7230.02
indication and high level transmiter RI V tank
alarm
MDO storage/settling tank yuanwng
Level UQK- 98% on
2133 SS20119 212 high UQK- YARD LAHH x NC mm ? 2133 see abh dwg. 0879/01-7230.02
switch 01-C V tank
high level alarm 01-C
MDO storage/settling tank
212 level Level LAH 75% on
2133 LI20165 HOPPE HOPPE x 4~20mA mm ? 2133 see abh dwg. 0879/01-7230.02
indication and high level transmiter RI V tank
alarm
MDO service tank 213
Level LAL 30% on
2307 LI20164 level indication HOPPE HOPPE x 4~20mA ? mm x AL see abh dwg. 0879/01-7230.02
transmiter RI V tank
and low level alarm
MDO service tank 214
Level LAL 30% on
2312 LI20158 level indication HOPPE HOPPE x 4~20mA ? mm 2133 see abh dwg. 0879/01-7230.02
transmiter RI V tank
and low level alarm
No.1 HFO transfer pump pressure on
2133 PT20313 inlet pressure HOPPE HOPPE RPI x 4~20mA `-1~+1 bar inlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.1 HFO transfer pump pressure on
2133 PT20312 outlet pressure HOPPE HOPPE RPI x 4~20mA 1~6 bar outlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.2 HFO transfer pump pressure on
2133 PT20289 inlet pressure HOPPE HOPPE RPI x 4~20mA `-1~+1 bar inlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.2 HFO transfer pump pressure on
2133 PT20288 outlet pressure HOPPE HOPPE RPI x 4~20mA 1~6 bar outlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.3 HFO transfer pump pressure on
2133 PT20302 inlet pressure HOPPE HOPPE RPI x 4~20mA `-1~+1 bar inlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.3 HFO transfer pump pressure on
2133 PT20303 outlet pressure HOPPE HOPPE RPI x 4~20mA 1~6 bar outlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
panel in ECR
No.4 HFO transfer pump pressure on
2133 PT20311 inlet pressure HOPPE HOPPE RPI x 4~20mA `-1~+1 bar inlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
No.4 HFO transfer pump pressure on
2133 PT20310 outlet pressure HOPPE HOPPE RPI x 4~20mA 1~6 bar outlet see abh dwg. 0879/01-7230.02
indication transmiter pipe
FW storage tank 502 PS
Level on
2134 LI1558 level indication HOPPE HOPPE RLI x 4~20mA ? mm 2133 see abh dwg. 0879/01-7520
transmiter tank
FW storage tank 301 SB
Level on
2135 LI1559 level indication HOPPE HOPPE RLI x 4~20mA ? mm 2133 see abh dwg. 0879/01-7520
transmiter tank
common alarm to alarm
2133 contact HOPPe EA x CO x AL GR3
system
618988350.xls 19 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
No.1 Cargo Hold Bilge Well on
Level see drawing no. 0879/01-7220.01
2217 LS1122 (PS) high level ELNA YARD LAH x NC mm x bilge 2217
switch LS1122
alarm well
on
No.2 Cargo Hold Fore Bilge Level see drawing no. 0879/01-7220.01
2217 LS1125 ELNA YARD LAH x NC mm x bilge 2217
Well (PS) high level alarm switch LS1125
well
on
No.2 Cargo Hold Fore Bilge Level see drawing no. 0879/01-7220.01
2217 LS1126 ELNA YARD LAH x NC mm x bilge 2217
Well (SB) high level alarm switch LS1126
well
No.2 Cargo Hold Aft Bilge on
Level see drawing no. 0879/01-7220.01
2217 LS1119 Well (PS) high level ELNA YARD LAH x NC mm x bilge 2217
switch LS1119
alarm] well
panel in ECR
No.2 Cargo Hold Aft Bilge on
Level see drawing no. 0879/01-7220.01
2217 LS1124 Well (SB) high level ELNA YARD LAH x NC mm x bilge 2217
switch LS1124
alarm well
on
Engine Room Fore Bilge Well Level see drawing no. 0879/01-7220.02
2216 LS11-050 ELNA YARD LAH x NC mm 200 x bilge 2216
(PS) high level alarm switch LS11-050
well
on
Engine Room Fore Bilge Well Level see drawing no. 0879/01-7220.02
2216 LS11-051 ELNA YARD LAH x NC mm 200 x bilge 2216
(SB) high level alarm switch LS11-051
well
on
Engine Room Aft Bilge Well Level see drawing no. 0879/01-7220.02
2220 LS11-011 ELNA YARD LAH x NC mm 100 x bilge 2216
high level alarm switch LS11-011
well
on
Bow Thruster Room (L1) Level see drawing no. 0879/01-7220.01
2218 LS1181 ELNA YARD LAH x NC mm x bilge 2218
high level alarm switch LS1182
well
Bow Thruster Room (L2) on
Level see drawing no. 0879/01-7220.01
2218 LS1182 high high level ELNA YARD LAH x NC mm x bilge 2218
switch LS1181
alarm well
on
Level see drawing no. 0879/01-7220.02 LS11-
2219 LS11-049 Pipe Tunnel high level alarm ELNA YARD LAH x NC mm 200 x bilge 2219
switch 049
well
panel in ECR
on
Level see drawing no. 0879/01-7220.02 LS11-
2219 LS1180 Pump room high level alarm ELNA YARD LAH x NC mm 100 x bilge 2219
switch 049
well
on
Bilge pump inlet pressure Pressure
2214 PT1190 Hoope HOPPE RI x 4~20mA bar suctio
indicate Transmiter
n on
line
Bilge pump outlet pressure Pressure disch
PT1191 Hoope HOPPE RI x 4~20mA bar
indicate Transmiter arge
line
2216 common bilge alarm ER contact Hoppe S x NC x AL E12
common bilge alarm cargo
2217 contact Hoppe S x NC x AL E13
hold
common bilge alarm bow
2218 contact Hoppe S x NC x AL E14
thrust room
common bilge alarm pump
2219 contact Hoppe S x NC x AL E15
room & pipe tunnel
Bilge water tank 502 Level yuanwan UQK- on
2220 LS11-013 YARD LAH x NC mm ? x AL see abh dwg. 0879/01-7230.02
high level alarm switch g 01-C tank
618988350.xls 20 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
618988350.xls 21 OF 28
abh Ingenieuer-Technik GmbH 0879/01-9001
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
24-MISCELLANEOUS
* * * * * * * * * * * * * * x *
ALARMS AUX. SYS:
2401 SG Winding temperature x MSB
engine telegraph faulure mak failure x NC x AL x
2403 ballast system / valve fail HOPPE failure x NC x AL x
2404 MSB 400V EARTH FAULT HST failure x NC x AL x
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
fire main pipe pressure gau
x
indicte ge
2431 Emergency fire pump fault x AL x
Quick closing system low
2432 x AL x
pressure alarm
2433 Sewage treatment plant fault x AL x
fan interlock
emergency stop
Nesserlander Straße 1, 26721 Emden Measuring Point List abh: Rev.:F/13.03.02 xingang shipyard: 30.05.02
Tel.: 0049-(0)4921-9277-0 Fax.: 0049-(0)4621-9277-25 HST/h xingang/Hu shiping
http://www.abh-emden.com e-mail : abh@emsnet.de
St-by
Measuringpoint Sytem-/ Measuring-Point- Indication via
Identification
Sensor description ME Safety System Alarm system REVISION020520
Description diff. System at:
YARD's CHANNEL
load reduction
kind of signal
type of sensor
MAKER-NO.
normal value
alarm printer
suppllied by
stby pumps
supp. delay
maker/type
alarm input
dimension
shut down
SYSTEM-
measuring
setpoint
location
analog
binary
signal
name
sensor
alarm
range
No.
ECR
local
W/H
type
REMARKS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 29 32
618988350.xls 24 OF 28
General Remarks:
3 Description
4 maker / type
5 sensor suppllied by
6 supp. delay
7 alarm x
ESB
9 ECR Me-SS
MSB
MSB/C
Tenfjord
10 W/H x
11 local x
12 load reduction x
13 shut down x
14 stby pumps x
15 alarm input x
16 disturbance print. x
C
17 Indi. via A(T)MW x
19 Indi. Dicare-Offl. x
20 REMARKS
21 type of sensor P
22 binär x
23 analog x
24 kind of signal
25 measuring range
26 signal dimension
27 minimum setpoint
28 maximum setpoint
Remark
for grouping and for identificatin by shipyard
self explanation
self explanation
self explanation
indicates that as as a reaction of a critical sensor status any system will give a signal to the operator
means sensor will direct connected to the alarm- and monitoring system and will produce an alarm if signal changes to critical status
max. amount = 64
means process values can be read via a digital display at a special Meanvalue Measuring System (Part of the alarm- and monitoring system
means these are process values witch must be given manually to the MAK-DICARE-OFFLINE-SYSTEM. The values can be read via different indicators ant different places
means Preasure
means Temperature
means Alarm
means hight
means low
means
means
self explanation
self explanation
self explanation
self explanation
self explanation