I-NET Catalog

Product Catalog
Contents
Category7 SSTP Solid Indoor Cable - Page 03
Category6A UTP Solid Indoor Cable - Page 04

Category6A Keystone Jack - Page 05
Category6A Unshielded Patch Cord - Page 05
Category6 UTP Solid Indoor Cable - Page 06

Category6 UTP Stranded Cable - Page 07
Category6 UTP Solid Outdoor Cable - Page 08
Category6 FTP Solid Indoor Cable - Page 09
Category6 SFTP Solid Indoor Cable - Page 10
Category6 SSTP Solid Indoor Cable - Page 11
Category6 Patch Panel - Page 12
Category6 Keystone Jack - Page 12
Category6 Unshielded Patch Cord - Page 13
Category6 Shielded Patch Cord - Page 13
Category6 Modular Plug - Page 13
Category6 Cross Connect System - Page 14
Category5e UTP Solid Indoor Cable - Page 15

Category5e UTP Stranded Cable - Page 16
Category5e FTP Solid Indoor Cable - Page 17
Category5e SFTP Solid Indoor Cable - Page 18
Category5e UTP Solid Riser Cable - Page 19
Category5e UTP Solid Jumper Cable - Page 20
Category5e Surface Mount Outlet - Page 20
Category5e Modular Plug - Page 20
Category5e Patch Panel - Page 21
Category5e Keystone Jack - Page 21
Category5e Unshielded Patch Cord - Page 22
Category5e Shielded Patch Cord - Page 22
Universal Modular Face Plate & Back Box - Page 22
Category3 Riser UTP Solid Cable - Page 23

Category3 Telephone Patch Panel - Page 24
Category3 Telco Pigtail - Page 24
Category3 Keystone Jack - Page 24
Category3 Voice Distribution - Page 25
Category3 Surface Mount Outlet - Page 25
Category3 Modular Plug - Page 25
Fiber Optic Indoor Cable - Page 26

Fiber Optic FTTH (Fiber-To-The-Home) G.657A Dry Cable - Page 26
Fiber Optic Indoor Single Loose Tube Cable - Page 27
Fiber Optic Indoor Multi Loose Tube Cable - Page 27
Fiber Optic Armored Single Loose Tube Cable - Page 28
Fiber Optic Armored Multi Loose Tube Cable - Page 28
Fiber Optic Connector - Page 29
Fiber Optic Adapter - Page 29
Fiber Optic Patch Panel & Splice Unit - Page 29
Fiber Optic Patch Cord - Page 30
Fiber Optic Pigtail - Page 30
Coaxial Cable - Page 31

Coaxial Plug - Page 31
Coaxial Patch Panel - Page 31
Coaxial Adapter - Page 31
Bal-Un (Balanced to Unbalanced) Dual G.703 75Ω-120Ω - Page 31
Wall Mount Cabinet - Page 32

Floor Standing Cabinet - Page 32
Open Floor Cabinet - Page 33
Cabinet Accessories - Page 33
Media Converter - Page 34

Ethernet Switch - Page 35
This information is distributed with the understanding that the authors are not responsible for the results of any actions taken on the basis of
2 information provided in the material and any omissions or errors. i-Net Networks disclaims all and any liability to any individual or organization in
respect of anything in reliance of the contents of this publication. This information should be used as a guide only, i-Net Networks reserves the
right to make changes without notice. All rights reserved. http://www.inetnetworks.co.uk. Contact us: info@inetnetworks.co.uk
Category7 SSTP Solid Indoor Cable
Specifications
Meets ISO/IEC 11801 & IEC 61156-5, category 7 requirements

Low Smoke Zero Halogen
The cable meets UL VW-1, IEC 60332-1, CM fire safety standard
Description
Shielded Copper cable, 4 pairs, Category 7, Solid, 600MHz

4 separately foil-shielded pairs
General shield: wire braid
Cable is used for indoor installation
Materials
1 – Jacket
Conductive material: Soft annealed electrolytic copper 2 – Shield-braid
Conductor insulation: HDPE, film-porous-film structure 3 – Drain wire
The cable jacket: LSZH
Shield: Separately shielded pairs with polyester aluminum foil 4 – Shield-foil
General shield: tin Copper braid – 60% minimum 5 – Solid twisted pair
Technical Characteristics
Conductor diameter: 0.64 mm (0.025") (22 AWG)

Outer cable diameter: 8.2 mm (0.32")
Operating temperature: -30°C – +70°C (-22°F – +158°F)
Weight per 1000 ft (304.8 m): 21.3 kg (47.7 lbs)
Standard package: 305m (1000 ft), 500 m (1640 ft)
Electrical Characteristics
Frequency , MHz Pair Attenuation, dB/100m NEXT losses, dB RL, dB
4 3.6 (1.10) 85 24
10 5.8 (1.80) 85 27
16 7.4 (2.26) 85 27
20 8.3 (2.53) 85 27
31.25 10.4 (3.2) 85 25
62.5 14.6 (4.45) 85 23
100 18.4 (5.61) 85 23
200 26.2 (7.98) 83 20
300 32.1 (9.78) 80 20
600 49 (14.93) 80 20
Conductor resistance at 20°C (68°F) 80.0 Ohm/km (128.75 Ohm/mile)

DC Resistance Unbalance 2% max
Resistance at frequency 1-600 MHz 100 ± 15 Ohm
Transfer impedance at frequency 1-10 MHz 5 MOhm/m (1.52 MOhm/ft) max
Capacitive unbalance at frequency 1 kHz 1.2 pF/m (0.36 pF/ft) max
Maximum voltage 60 V RMS
Dielectric rigidity 700 V/min
Insulation resistance at 20°C (68°F) 152 MOhm/km (244.62 MOhm/mile) min
Propagation velocity 79-80%
Max propagation delay at frequency 1 MHz 5.3 ns/m (1.61 ns/ft)
Max propagation delay at frequency 10 MHz 5.0 ns/m (1.52 ns/ft)
Max propagation delay at frequency 100-600 MHz 5.0 ns/m (1.52 ns/ft)
Max derivation of propagation delay at frequency 1-600 MHz 15 ns/100 m (4.57 ns/100 ft)
Ordering Information
HI7SSL-M i-Net Networks Horizontal Indoor Cable Category7 SSTP Solid 22AWG 4 Pair LSZH Milky Gray
M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow
information provided in the material and any omissions or errors. i-Net Networks disclaims all and any liability to any individual or organization in
3
Category6A UTP Solid Indoor Cable
Specification
Meets ANSI/EIA/TIA 568-B.2-10 requirements

Meets general purpose cable UL-1581 CM rating
Meets fire retardant low smoke IEC60332-1 rating
Meets ISO/IEC 2nd edition 11801 Amendment 1.2
Meets ISO/IEC 61156-2 2nd edition & CENELEC EN 50288-10-1
Tested up to 650MHz Jacket
Insulator
Description
Copper Conductor
Copper cable, 4 pairs, Category 6A, Solid, 500MHz
Cross Spacer
Material
Conductive material: Soft annealed electrolytic copper

Conductor insulation: HDPE, film-porous-film structure
The cable jacket: PVC
Technical Characteristic
Conductor diameter: 0.58 ± 0.02 mm (23AWG) Sheath diameter: 10.5 ± 0.3 mm (0.41")
Insulation diameter: 1.1 ± 0.01 mm Sheath elongation: Minimum 100%
Insulation thickness: Minimum 0.208 mm, Average 0.25 mm Sheath tensile strength: Minimum 1.407 Kg/mm²
Insulation elongation: Minimum 300% Operating temperature: -30°C – +70°C (-22°F – +158°F)
Insulation tensile strength: Minimum 1.682 Kg/mm² Weight per 1000 ft (304.8 m): 21.3 kg (47.7 lbs)
Sheath thickness: Minimum 0.75mm, Average 0.80 mm Standard package: 304.8 m (1000 ft)
Electrical Characteristic
Frequency , MHz Pair Attenuation, dB/100m NEXT losses, dB PS NEXT, dB
1 2.1 74.3 72.3
10 5.9 59.3 57.3
100 19.1 44.3 42.3
200 27.6 39.8 37.8
250 31.1 38.3 36.3
300 34.3 37.1 35.1
400 40.1 35.3 33.3
500 45.3 33.8 31.8
Dielectric strength 2.5kV/3 seconds

Insulation resistance test Min. 150MΩ/km
Conductor resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100ft)
DC Resistance Unbalance 2%
Pair-to-Ground Capacitance Unbalance 160pF/100m (51pF/100 ft)
Impedance 1-500 MHz 100Ω-115Ω
Mutual Capacitance 5.6nF/m (1.7nF/ft)
Spark Test 2.5kV
HI6AUS-M-C i-Net Networks Horizontal Indoor Cable Category6A UTP Solid 23AWG 4 Pair Milky Gray CM
C C—CM, L—LSZH, P—Plenum
Category6A Keystone Jack
Specification KJ6A-U-TL KJ6A-U-PM
Meets ANSI/EIA/TIA 568-B.2-10, IEEE802.3an

Meets fire retardant UL94V rating
Meets EN 50173 Class EA specification
RoHS compliant
Description
It is designed for 22-26 AWG solid conductors

Horizontal & Vertical termination
Material
Dielectric strength: 1000V RMS per minute
Housing: ABS UL94V-0 Current rating: 1.5 Amp Max.
IDC: PC UL94V-0, accepts 22-26 AWG solid wire Insulation Resistance: 500MΩ
PCB: FR-4 1.6 mm (0.062") thick, 2 layers Contact resistance: 20MΩ
IDC contact: Phosphor bronze 2.54 micron (50 micro inches) gold Temperature range: -10ºC to +60ºC
over 1.27 micron (100 micro inches) nickel Humidity: 10%~90% non condensing
KJ6A-U-PD i-Net Networks Keystone Jack Category6A Unshielded Punch Down
U U—Unshielded, S—Shielded
PD PD—Punch Down, TL—Tool Less, PM—Panel Mount, FM—Floor Mount
Category6A Unshielded Patch Cord
Specification

Meets ISO/IEC 61156-2 2nd edition for stranded cable
Material
Cable
Conductor: 7 copper wires Ø0.20 mm (0.008"), 24 AWG
Insulation: High Density Polyethylene (HDPE)
Diameter of insulated conductor: 0.98 ± 0.05 mm (0.039" ± 0.002")
Number of pairs: 4
Color of Twisted Pairs: blue-white/blue, orange-white/orange,
green-white/green, brown-white/brown
Jacket: PVC 5.85 ± 0.2 mm
Plug
2 pieces Unshielded RJ-45 8P8C, category 6A, for patch cable
Contact: Phosphor bronze, 2.54 micron (50 micro inches) gold over
1.27 micron (100 micro inches) nickel
Molded Boot Material: PVC
PC6AU-M-03 i-Net Networks Patch Cord Category6A Unshielded Stranded 24AWG 4Pair Milky Gray 3 Feet
03 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft
5
Category6 UTP Solid Indoor Cable
Specification

Meets plenum UL-910 rating
Tested up to 350MHz
Description
Unshielded copper cable, 4 pairs, category 6, solid

Material
Conductive material: Soft annealed electrolytic copper 1 – Jacket

Conductor insulation: HDPE, film-porous-film structure 2 – Solid Twisted Pair
The cable jacket: PVC / LSZH / Plenum 3 – Spacer
Conductor diameter: 0.56-0.51 ± 0.01 mm (23-24 AWG)

Insulated conductor diameter: 0.99 ± 0.2 mm (0.038" ± 0.008")
Outer cable diameter: 6.2 ± 0.2 mm (0.24" ± 0.008")
Jacket thickness: 0.4 mm (0.0157")
Pulling strength: 130 N
Minimum bend radius: 8xØ while installation, 6xØ while vertical cabling, 4xØ while horizontal cabling
Operating temperature: -20°C to +75°C (-4°F to +167°F)
Weight per 1000 ft (304.8 m): 24 AWG 11.5 kg (25.35 lbs) / 23 AWG 13.0 Kg (28.66 lbs)
Standard package: 304.8 m (1000 ft)
Frequency, MHz RL Attenuation, dB NEXT, dB PSNEXT, dB ELFEXT, dB PSELFEXT, dB
1.0 20.0 2.0 74.3 72.3 67.8 64.8
4.0 20.3 3.8 65.3 63.3 55.8 52.8
8.0 24.5 5.3 60.8 58.8 49.7 46.7
10.0 25.0 6.0 59.3 57.3 47.8 44.8
16.0 25.0 7.6 56.3 54.3 43.7 40.7
20.0 25.0 8.5 54.8 52.8 41.8 38.8
25.0 24.3 9.5 53.3 51.3 39.8 36.8
31.25 23.6 10.7 51.9 49.9 37.9 34.9
62.5 21.5 15.4 47.4 45.4 31.9 28.9
100.0 20.1 19.8 44.3 42.3 27.8 24.8
200.0 18.0 29.0 39.8 37.8 21.8 18.8
250.0 17.3 32.8 38.3 36.3 19.8 16.8
Conductor resistance at 20°C (68°F) 9.38Ω100m (2.9Ω/100ft)

Pair-to-Ground Capacitance Unbalance 330pF/100m (101pF/100ft)
Spark Test 2.5kV
HI06US3-M-C i-Net Networks Horizontal Indoor Cable Category6 UTP Solid 23AWG 4Pair Milky Gray CM
HI06US4-M-C i-Net Networks Horizontal Indoor Cable Category6 UTP Solid 24AWG 4Pair Milky Gray CM
Category6 UTP Stranded Cable
Specification

Description
Unshielded Copper, 4 pairs, category 6, stranded

Material
Conductive material: wire made of soft annealed electrolytic copper

Conductor insulation: HDPE, film-porous-film structure 1 – Jacket
The cable jacket: PVC / LSZH 2 – Stranded Twisted Pair
Conductor diameter: 7 x 0.2 mm ± 0.01 mm (7" x 0.008" ± 0.0004") (24 AWG)

Insulated conductor diameter: 1.03 ± 0.2 mm (0.04 " ± 0.008")
Operating temperature: -5°C – +60°C (+23°F – +140°F)
Weight per 1000 ft (304.8 m): 24 AWG 11.5 kg (25.35 lbs)
1.0 20.0 2.4 74.3 72.3 67.8 64.8
4.0 23.0 4.5 65.3 63.3 55.8 52.8
8.0 24.5 6.4 60.8 58.8 49.7 46.7
10.0 25.0 7.1 59.3 57.3 47.8 44.8
16.0 25.0 9.1 56.2 54.2 43.7 40.7
20.0 25.0 10.2 54.8 52.8 41.8 38.8
25.0 24.2 11.4 53.3 51.3 39.8 36.8
31.25 23.3 12.8 51.9 49.9 37.9 34.9
62.5 20.7 18.5 47.4 45.4 31.9 28.9
100.0 19.0 23.8 44.3 42.3 27.8 24.8
200.0 16.4 34.8 39.8 37.8 21.8 18.8
250.0 15.6 39.4 38.3 36.3 19.8 16.8

Spark Test 2.5kV
HI06UR-M-C i-Net Networks Horizontal Cable Category6 UTP Stranded 24AWG 4Pair Milky Gray CM
C C—CM, L—LSZH
7
Category6 UTP Solid Outdoor Cable
Specification

Tested up to 350MHz
Description
1 – Jacket
Unshielded Copper cable, 4 pairs, category 6, solid 2 – Solid Twisted Pair
Cable is used for outdoor installation 3 – Spacer
Material

The cable inner jacket: PVC / LSZH / Plenum
The Cable outer jacket: UV resistant black PE

Pulling strength: 130 N maximum
Conductor elongation: 14% minimum
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8
200.0 18.6 27.9 33.2 30.3 20.7 17.8
250.0 17.3 31.9 30.2 28.3 17.9 14.7

Spark Test 2.5kV
HO06USL-3-C i-Net Networks Horizontal Outdoor Cable Category6 UTP Solid 23AWG 4Pair Black PE CM
3 3—23AWG, 4—24AWG
Category6 FTP Solid Indoor Cable
Specification

Description
1 – Jacket
Foiled Copper cable, 4 pairs, category 6, solid 2 – Shield-Foil
4 foiled twisted pairs 3 – Protective Skin
General shield: aluminum foil 4 – Drain wire
Cable is used for indoor installation 5 – Twisted pair
Material

The cable jacket: PVC / LSZH / Plenum
Shield: 4 pair is foiled with polyester aluminum foil, which covers 100% of twisted pair
General shield: An aluminum tape shield is helically applied over the cable core with a minimum overlap of 25% or 5 mm (0.19"), thickness –
0.025 mm (0.001"), width – 20 mm (0.78")

Insulated conductor diameter: 1.56 mm (0.06")
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8
200.0 19.5 25.6 32.2 29.8 19.6 18.7
250.0 18.7 29.3 29.4 26.4 16.8 16.8
Max conductor resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100ft)

Max Resistance Unbalance 5%
Max pair-to-ground capacitance unbalance 330pF/100m (101pF/100ft)
Characteristic Impedance at 1-250 MHz 85Ω-115Ω
Mutual capacitance 5.6nF/m (1.7nF/ft)
Spark Test 2.5kV
HI06FSM-3-C i-Net Networks Horizontal Indoor Cable Category6 FTP Solid 23AWG 4Pair Milky Gray CM
3 3—23AWG, 4—24AWG
9
Category6 SFTP Solid Indoor Cable
Specification

1 – Jacket
Description 2 – Shield-Braid
3 – Protective Skin
Shielded Copper cable, 4 pairs, category 6, solid 4 – Drain wire
4 foil-shielded twisted pairs 5 – Shield-Foil
General shield: aluminum foil and wire braid 6 – Twisted pair
Material

Shield: 4 pair is shielded with polyester aluminum foil, which covers 100% of twisted pair
General shield: An aluminum tape shield is helically applied over the cable core with a minimum overlap of 25% or 5 mm (0.19"), thickness –
0.025 mm (0.001"), width – 20 mm (0.78")

Insulated conductor diameter: 1.56 mm (0.06")
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8
200.0 19.5 25.6 32.2 29.8 19.6 18.7
250.0 18.7 29.3 29.4 26.4 16.8 16.8

Characteristic Impedance at 1-250 MHz 85Ω-115Ω
Spark Test 2.5kV
HI06SSM-3-C i-Net Networks Horizontal Indoor Cable Category6 SFTP Solid 23AWG 4Pair Milky Gray CM
3 3—23AWG, 4—24AWG
Category6 SSTP Solid Indoor Cable
Specification

Description
Shielded Copper cable, 4 pairs, category 6, solid

4 separately foil-shielded twisted pairs
Material
Conductive material: wire made of soft annealed electrolytic copper 1 – Jacket

Conductor insulation: HDPE 2 – Shield-foil
The cable jacket: PVC / LSZH / Plenum 3 – Drain wire
Every pair is separately 100% shielded with polyester aluminum foil 4 – Solid twisted pair
Conductor diameter: 0.56 ± 0.01 mm (0.022" ± 0.0004") (23 AWG) Conductor elongation: 14% minimum
Insulated conductor diameter: 1.43 mm (0.056") Rip cord has a breaking strength of 10 kg (98 N)
Outer cable diameter: 7.8 mm (0.3") Drain wire diameter: 0.5 mm (0.01968")
Jacket thickness: 0.7 mm (0.0275") Installation temperature is -5°C – +50°C (+23°F – +122°F)
Pulling strength: 130 N maximum Operating temperature: -20°C – +60°C (-4°F – +140°F)
Minimum bend radius: 8xØ while installation, 6xØ while vertical Weight per 1000 ft (304.8 m): 23 AWG 16.4 kg (36.16 lbs)
cabling, 4xØ while horizontal cabling Standard package: 304.8 m (1000 ft)
Frequency, Pair Attenuation, PP ELFEXT, PS ELFEXT, dB/100m
NEXT, dB PS NEXT, dB RL, dB
MHz dB/100m (dB/100ft) dB/100m (dB/100ft) (dB/100ft)
1 2 (0.6) 80 77 75 (22.86) 72 (21.94) 20

4 3.8 (1.16) 80 77 75 (22.86) 72 (21.94) 23
10 6 (1.83) 80 77 75 (22.86) 72 (21.94) 25
16 7.6 (2.32) 80 77 75 (22.86) 72 (21.94) 25
20 8.5 (2.59) 80 77 75 (22.86) 72 (21.94) 25
31.25 10.7 (3.26) 80 77 75 (22.86) 72 (21.94) 23.6
62.5 15.4 (4.69) 80 77 75 (22.86) 72 (21.94) 22
100 19.8 (6.03) 80 77 70 (21.34) 67 (20.42) 21
125 22.4 (6.83) 70 67 65 (19.81) 62 (19.90) 20
200 29 (8.84) 70 67 60 (18.29) 57 (17.37) 19
250 35.6 (10.85) 70 67 55 (16.77) 52 (15.04) 18
Maximum conductor resistance at 20°C (68°F) 73.0Ω/km (117.48Ω/mile)

Resistance unbalance 2% max.
Resistance at the frequency of 1-250 MHz 100Ω ± 15%
Transfer impedance at the frequency of 1 MHz 50MΩ/m (15.24MΩ/ft) max.
Insulation resistance at 20°C (68°F) 152MΩ/km (244.62MΩ/mile) min.
Capacitive unbalance at the frequency of 1 kHz 1.5pF/m (0.46pF/ft)
Capacity at the frequency of 1 kHz 43pF/m (13.1pF/ft)
Maximum voltage 60V RMS
Dielectric rigidity 700V per minute
Propagation velocity 80%
Max. derivation of propagation delay at freq. of 1-250 MHz 25ns/100m (7.62ns/100 ft)
HI06TSM-C i-Net Networks Horizontal Indoor Cable Category6 SSTP Solid 23AWG 4Pair Milky Gray CM
11
Category6 Patch Panel
Specification
Meets ANSI/TIA/EIA-568-B.2 Category 6 requirements

Meets TIA/EIA TSB-40
PP06-UL-24
Meets ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0
Meets CENELEC Generic Cabling Standard EN50173 – 1:2002
Meets EN 50173-1 specification PP06-US-24
Description
19" standard size for mounting in racks and cabinets

This patch panel is designed for 22-26 AWG solid conductors
Height: 1U (24 ports), 2U (48 ports) PP06-SS-24
Material
Housing: ABS 94V-0

IDC: PC UL94V-0
PCB: FR-4 1.6 mm (0.06") thick, 2 layers
Contacts: 0.35 mm (0.014") phosphor bronze with 1.27 micron (50 PP06-KU-24
micro inches) gold plated contact area
Metal housing: 1.6 mm (0.06") thick metal
Construction Characteristic
• Modern design and mounting simplicity

• Color marking of conductors according to T568B and T568A
• Numeral marking of ports on the front side of the panel Electrical Characteristic
• Color and numeral marking of IDC modules on the rear side
• IDC Dual contacts provide minimal crosstalk According to UL1863
• 110 type punch down tool is used for cable termination Current rating: 1.5A Max.
• LCI Lighting Cable Identification Technology for saving cost and Voltage rating: 150V
time on cable identification job (LED Patch Panel Only) Contact Resistance: 20MΩ
• Two LED statuses (Green/Red) for identifying on-line or off-line to Insulation Resistance: 500MΩ
check connectivity to active device (LED Patch Panel Only) Dielectric Withstand Voltage: 1000V AC RMS, 60Hz/1min
PP06-UL-24 i-Net Networks Patch Panel Category6 Unshielded LED Dual IDC 24 Port
UL—Unshielded LED Dual IDC, US—Unshielded Std. Dual IDC, SS—Shielded Std. Dual IDC,
UL
KU—Keystone Unloaded, KL—Keystone Loaded
24 24—24 Port, 48—48 Port
Category6 Keystone Jack
Specification KJ06-U-PD KJ06-S-PD KJ06-U-TL
Meets TIA/EIA-568-A Category 6 requirements

Meets ISO/IEC Generic Cabling Standard 11801
Meets CENELEC Generic Cabling Standard EN50173
Description
It is designed for 22-26 AWG solid conductors KJ06-U-PM KJ06-U-FM

Material
Housing: ABS UL94V-0

IDC: PC UL94V-0, accepts 22-26 AWG Solid Wire
Contact: 0.45 mm (0.018") in diameter, phosphor and bronze with
1.27 micron (50 micro inches) gold plating Electrical Characteristic
According to UL1863
Structural Feature
Current rating: 1.5 Amp Max.
Voltage rating: 150V
Category identification on the front side of the panel Contact resistance: 20MΩ
Conductor color code according to T568B and T568A Insulation Resistance: 500MΩ
Contact color and numerical marking Dielectric Withstand Voltage: 1000V AC RMS, 60Hz/1min
i-Net Networks patch cord usage provides the best connection.
KJ06-U-PD i-Net Networks Keystone Jack Category6 Unshielded Punch Down
Category6 Unshielded Patch Cord
Material
Cable
Number of pairs: 4
Jacket: PVC Ø6, 8±0, 2 mm
Plug
2 pieces Unshielded RJ-45 8P8C, category 6, for patch cable
Contact: 1.27 micron (50 micro inches) gold plated copper alloy
PC06U-M-01 i-Net Networks Patch Cord Category6 Unshielded Stranded 24AWG 4Pair Milky Gray 1 Feet
01 01—1 Ft, 02—2 Ft, 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft, 32—32 Ft, 49—49 Ft, 65—65 Ft, 98—98 Ft
Category6 Shielded Patch Cord
Material
Cable
Number of pairs: 4
Grounding wire: 0.20 mm/7 tinned copper
Jacket: PVC Ø6, 8±0, 2 mm
Plug
2 pieces Shielded RJ-45 8P8C, category 6, for patch cable, shielded
PC06S-M-03 i-Net Networks Patch Cord Category6 Shielded Stranded 24AWG 4Pair Milky Gray 3 Feet
03 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft
Category6 Modular Plug
Material
Housing: PC UL94V-2
Contacts: copper alloy with 1.27 micron (50 micro inches) gold plated
Shield: copper alloy, covering – nickel
P06-U i-Net Networks Modular Plug Category6 Unshielded
13
Category6 Cross Connect System
Mounting Panel
100 and 200 pair 110-type panel for interconnection wiring

Mounting: Rack / Wall Mounting
Color: white
Connection Block
Housing: PC/ABS
PIN: phosphor-bronze with gold plating
Standard: Category6
Types: 4 Pair / 5 Pair
Color: white
Connection Clip
Housing: PC/ABS
Cover: transparent PC
PIN: phosphor-bronze with gold plating
Patch Cord
Cable
Number of pairs: 1/2/4
Color of twisted pairs: blue-white/blue, orange-white/orange,
Jacket: PVC Ø2.6 ± 0.2 mm (0.1" ± 0.008")/PVC Ø4.2 ± 0.2 mm
(0.17" ± 0.008")/PVC Ø5.5 ± 0.2 mm (0.22" ± 0.008")
Jacket color: light grey
Plug
1 Piece 8P8C
1 or 2 pieces, 1 or 2 or 4-pair 110 type, for stranded (patch) cable
Material: Poly Carbonate (PC)
PIN: Phosphor bronze with gold plating
X06S-R-050 i-Net Networks Cross Connect System Category6 Rack Mount 100Pair 110 Type
R R—Rack Mount, W—Wall Mount without Leg, L-Wall Mount with Leg
050 050—50 Pair, 100—100 Pair, 200—200 Pair
X06M-W i-Net Networks Cross Connect Cable Manager Wall Mount
W W—Wall Mount, R—Rack Mount
X06B-4 i-Net Networks Cross Connection Block Category6 4Pair
4 4—4 Pair, 5—5 Pair
X06C-1 i-Net Networks Cross Connection Clip Category6 1Pair
1 1—1 Pair, 2—2 Pair, 4—4 Pair
X06P-1-3 i-Net Networks Cross Connect Patch Cord Category6 Stranded 24AWG 1Pair Milky Grey 3 Feet
1 1—1 Pair, 2—2 Pair, 4—4 Pair
3 03—3 Feet, 06—6 Feet, 10—10 Feet
Category5e UTP Solid Indoor Cable
Specification
Meets ANSI/EIA/TIA 568-B.2 requirements

Description
Unshielded Copper cable, 4 pairs, category 5e, solid

Material

Conductor insulation: HDPE 1 – Jacket
The cable jacket: PVC / LSZH / Plenum 2 – Solid Twisted Pair

Rip cord has a breaking strength of 10 kg (98 N)
Breaking strength: 600 N
Installation temperature: -5°C – +50°C (+23°F – +122°F)
Operating temperature:-20°C – +75°C (-4°F – +167°F)
0.772 - 1.8 67.0 64.0 - -
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8

Impedance 0.772-100 MHz 85Ω-115Ω
Spark Test 2.5kV
HI5EUS-M-C i-Net Networks Horizontal Indoor Cable Category5e UTP Solid 24AWG 4Pair Milky Grey CM
M M—Milky Grey, B—Blue, L—Black, G—Green, R—Red, Y—Yellow
15
Category5e UTP Stranded Cable
Specification

Description
Unshielded Copper cable, 4 pairs, category 5e, solid

Material

The cable jacket: PVC / LSZH / Plenum 2 – Stranded Twisted Pair
Conductor diameter: 7 x 0.18 mm ± 0.01 mm (7" x 0.007" ± 0.0004") (24 AWG)

Operating temperature:-20°C – +75°C (-4°F – +167°F)
0.772 - 1.8 67.0 64.0 - -
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8

Pair-to-Ground Capacitance Unbalance 330pF/100m (101pF/100 ft)
Spark Test 2.5kV
HI5EUR-M-C i-Net Networks Horizontal Indoor Cable Category5e UTP Stranded 24AWG 4Pair Milky Gray CM
M M—Milky Grey, B—Blue, L—Black, G—Green, R—Red, Y—Yellow
C C—CM, L—LSZH
Category5e FTP Solid Indoor Cable
Specification

Description 1 – Jacket
2 – Shield – foil
Shielded Copper cable, 4 pairs, category 5e, solid 3 – Drain wire
Shield: Aluminum foil 4 – Protective skin
Cable is used for indoor installation 5 – Solid twisted pair
Material

Conductor insulation: HDPE
An aluminum tape shield is helically applied over the cable core with a minimum overlap of 5 mm (0.19")

Drain wire diameter: 0.5 mm (0.019")
Breaking strength: 400 N
0.772 - 1.8 67.0 64.0 - -
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8

Characteristic Impedance at 0.772-100 MHz 85Ω-115Ω
Spark Test 2.5kV
HI5EFSM-C i-Net Networks Horizontal Indoor Cable Category5e FTP Solid 24AWG 4Pair Milky Gray CM
17
Category5e SFTP Solid Indoor Cable
Specifications

Description 1 – Jacket
2 – Shield-braid
Shielded Copper cable, 4 pairs, category 5e, solid 3 – Drain wire
Shield: Aluminum foil and wire braid 4 – Protective skin
Cable is used for indoor installation 5 – Solid twisted pair
Materials

The cable jacket: PVC
An aluminum tape shield is helically applied over the cable core with a minimum overlap of 25% or 5 mm (0.19"), thickness – 0.025 mm
(0.001"), width – 20 mm (0.78"), and braid of 16 tinned Copper wires
Conductor diameter: 7 x 0.2 mm (0.008") (24 AWG)

Drain wire diameter: 0.5 mm (0.019")
Operating temperature: –4°F to +167°F (–20°C to +75°C)
Electrical Characteristics
0.772 - 1.8 67.0 64.0 - -
1.0 20.0 2.0 65.3 62.3 63.8 60.8
4.0 23.0 4.0 56.3 53.3 51.7 48.7
8.0 24.5 5.8 51.8 48.8 45.7 42.7
10.0 25.0 6.5 50.3 47.3 43.8 40.8
16.0 25.0 8.2 47.3 44.3 39.7 36.7
20.0 25.0 9.3 45.8 42.8 37.7 34.7
25.0 24.3 10.4 44.3 41.3 35.8 32.8
31.25 23.6 11.7 42.9 39.9 33.9 30.9
62.5 21.5 17.0 38.4 35.4 27.8 24.8
100.0 20.1 22.0 35.3 32.3 23.8 20.8

Characteristic Impedance at 0.772-100 MHz 85Ω-115Ω
Spark Test 2.5kV
HI5ESSM-C i-Net Networks Horizontal Indoor Cable Category5e SFTP Solid 24AWG 4Pair Milky Gray CM
Category5e UTP Solid Riser Cable
Specification

Description
Unshielded Copper, 25, 50, 100 pairs, category 5e, solid

Cable is used for indoor/outdoor installation
Material

The cable jacket: PVC, PE Jelly, PE Armored
Electrical Characteristic Max. dc resistance at 20°C (68°F) 93.8Ω/km (151.3Ω/mile)
Frequency, Max Attenuation, PS-NEXT, PS-ACR, Resistance at 1-100 MHz 100Ω ±15%
MHz dB/100 m (ft) dB dB/100m (ft)
Resistance unbalance 3%
0.772 1.8 (0.55) 64 62.2 (19.0) Capacity at the frequency of 1 kHz 50±4 pF/m (15.3±1 pF/ft)
1.0 2.0 (0.6) 62 60.0 (18.3) Capacitive unbalance at 1 kHz 3300pF/km (5322.6pF/mile)
4.0 4.1 (1.3) 53 48.9 (14.9) Maximum voltage 300V
8.0 5.80 (1.8) 48 42.2 (12.9) Min. unbalance losses at 64 kHz 43dB
10.0 6.5 (2.0) 47 40.5 (12.3) Insulating strength 700V RMS
16.0 8.2 (2.5) 44 35.8 (10.9) Propagation velocity 68%
20.0 9.3 (2.8) 42 32.8 (10.0) Max. propagation delay:
25.0 10.4 (3.2) 41 30.6 (9.3) at the frequency of 1 MHz 5.7ns/m (1.74ns/ft)
at the frequency of 10 MHz 5.4ns/m (1.64ns/ft)
31.25 11.7 (3.6) 39 28.3 (8.6) at the frequency of 100 MHz 5.3ns/m (1.61ns/ft)
62.5 17.0 (5.2) 35 18.0 (5.5) Derivation propagation delay 35ns/100m (10.67ns/100ft)
100.0 22.0 (6.7) 32 10.0 (3.0) Min. insulating resistance 5GΩ/km (8.05GΩ/mile)
Parameters 25 Pair 50 Pair 100 Pair
Conductor diameter 0.51 mm (24 AWG) 0.51 mm (24 AWG) 0.51 mm (24 AWG)
Insulated conductor diameter 0.9 mm (0.035") 0.9 mm (0.035") 0.9 mm (0.035")
Outer cable diameter 11.4 mm (0.45") 17.8 mm (0.70") 24.6 mm (0.97")
Jacket thickness 1.0 mm (0.039") 1.0 mm (0.039") 1.0 mm (0.039")
Minimum bend radius 10xØ 10xØ 10xØ
Conductor elongation Min 14% Min 14% Min 14%
Rip cord breaking strength 10 kg (98 N) 10 kg (98 N) 10 kg (98 N)
Pulling strength 500 N 500 N 500 N
Breaking strength 600 N 600 N 600 N
Installation temperature -10°C to +40°C -10°C to +40°C -10°C to +40°C
Operating temperature -40°C to +70°C -10°C to +50°C -10°C to +50°C
Weight per Std. Pack 65.2 kg (143.7 lbs) 103.6 kg (228.5 lbs) 174 kg (383.7 lbs)
Standard package 304.8 m (1000 ft) 304.8 m (1000 ft) 304.8 m (1000 ft)
R5EX-I-25 i-Net Networks Riser Cable Category5e UTP Solid 24AWG CMX Indoor PVC Milky Gray 25 Pair
I I—Indoor PVC Milky Gray, J—Outdoor Jelly Filled PE Black, A—Outdoor Armored PE Black
25 25—25 Pair, 50—50 Pair, 1H—100 Pair
19
Category5e UTP Solid Jumper Cable
Specification

1 – Solid Twisted Pair
Description
Unshielded Copper cable, 2 pairs, category 5, solid

Material

The cable jacket: PVC (polyvinyl chloride) 2 – Solid Twisted Pair

Weight: 1 Pair 100 ft ( 30.48 m) — 0.5 kg (1.10 lbs) /
2 Pair 1000 ft (304.8 m) — 5.5 kg (12.12 lbs)
Minimum bend radius: 4xØ
Std pack: 1 Pair—30.48m, 100m, 200m (100 ft, 328.1 ft, 656.2 ft),
2 Pair—304.8 m (1000 ft)

Spark Test 2.5kV
HJ5ES-1 i-Net Networks Jumper Cable Category5e UTP Solid 24AWG 1 Pair (w/o Jacket)
1 1—1 Pair (w/o Jacket), 2—2 Pair Milky Gray
Category5e Surface Mount Outlet
Specification
Meets ANSI/TIA/EIA-568-B.2 category 5e & TIA/EIA TSB-40

Meets ISO/IEC generic cabling standard 11801
Meets CENELEC generic cabling standard EN50173
Material In accordance with UL1863

Current rating: 1.5A max
Housing: ABS UL94V-0 Voltage rating: 150V
IDC : PC UL94V-0 Contact resistance: 20MΩ
PCB : FR-4 1.6 mm (0.06") thick, 2 layers Dielectric withstand voltage: 1000V AC RMS, 60Hz 1min
SM5E-U-1 i-Net Networks Surface Mount Category5e Unshielded 1 Port
1 1—1 Port, 2—2 Port
Category5e Modular Plug

Material
Housing: PC UL94V-2
Contacts: Copper alloy with 1.27 micron (50 micro inches) gold plating
Shield: copper alloy, covering – nickel
P5E-U i-Net Networks Modular Plug Category5e Unshielded
Category5e Patch Panel
Specification PP5E-US-24
Meets ANSI/TIA/EIA-568-B.2 Category 5e requirements

Meets ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0
Meets CENELEC Generic Cabling Standard EN50173 — 1:2002
PP5E-US-48
Description
19" standard size for mounting in racks and cabinets

This patch panel is designed for 22-26 AWG solid conductors
Height: 1U (24 ports), 2U (48 ports)
PP5E-SS-24
Material
Housing: ABS 94V-0

IDC: PC UL94V-0
Contacts: 0.35 mm (0.014") phosphor w/ bronze 1.27 micron PP5E-KU-24
(50 micro inches) gold plating contact area
Metal housing: 1.6 mm (0.06") thick metal
• Color marking of conductors according to T568B and T568A

• Numeral marking of ports on the front side of the panel
• Space for additional marking Electrical Characteristic
• Color numeral marking of IDC on the rear side of the panel
• i-Net Networks patch cord usage provides the best connection According to UL1863
• IDC Dual contacts provide minimal crosstalk Current rating: 1.5A max
• 110 type punch down tool is used for cable termination Voltage rating: 150V
• Removable shield cover (for shielded patch panel only) Contact Resistance: 20MΩ
• Ground bus (for shielded patch panel only) Insulation Resistance: 500MΩ
• Rear cable manager (for shielded and keystone patch panels only) Dielectric withstand voltage: 1000V AC RMS, 60Hz/1min
PP5E-US-24 i-Net Networks Patch Panel Category5e Unshielded Dual IDC 24 Port
UL—Unshielded LED Dual IDC, US—Unshielded Std. Dual IDC, SS—Shielded Std. Dual IDC,
US
KU—Keystone Unloaded, KL—Keystone Loaded
24 24—24 Port, 48—48 Port
Category5e Keystone Jack
Specification KJ5E-U-PD KJ5E-S-PD KJ5E-U-TL
Meets TIA/EIA-568-A Category 5e requirements.

Description
KJ5E-U-PM KJ5E-U-FM
It is designed for 22-26 AWG solid conductors
Material

IDC: PC UL94V-0, accepts 22-26 AWG Solid Wire
Contact: 0.45 mm (0.018") in diameter, phosphor and bronze with
1.27 micron (50 micro inches) gold plating Electrical Characteristic
According to UL1863
Structural Feature Current rating: 1.5A Max.
Category identification on the front side of the panel Contact resistance: 20MΩ
Conductor color code according to T568B and T568A Insulation Resistance: 500MΩ
Contact color and numerical marking Dielectric Withstand Voltage: 1000V AC RMS, 60Hz/1min
KJ5E-U-PD i-Net Networks Keystone Jack Category5e Unshielded Punch Down
21
Category5e Unshielded Patch Cord
Material
Cable
Number of pairs: 4
Color of twisted pairs: blue-white/blue, orange-white/orange, green-white/green, brown-white/brown
Jacket: PVC Ø5.5 ± 0.2 mm (0.22" ± 0.008")
Plug
2 pieces RJ-45 8P8C
PC5EU-M-01 i-Net Networks Patch Cord Category5e Unshielded Stranded 24AWG 4Pair Milky Gray 01 Ft
01 01—1 Ft, 02—2 Ft, 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft, 32—32 Ft, 49—49 Ft, 65—65 Ft, 98—98 Ft
Category5e Shielded Patch Cord
Material
Cable
Number of pairs: 4
Color of twisted pairs: blue-white/blue, orange-white/orange, green-white/green, brown-white/brown
Shield: Aluminum Foil
Drain wire: 7 wires Ø0.20 mm (0.008")
Jacket: PVC Ø5.5 ± 0.2 mm (0.22" ± 0.008")
Plug
2 pieces RJ-45 8P8C
PC5ES-M-03 i-Net Networks Patch Cord Category5e Shielded Stranded 24AWG 4Pair Milky Gray 01 Ft
03 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft
Universal Modular Face Plate & Back Box
Specification Plain Plate Aesthetic Plate Angled Plate
Standard: European Style

Face Plate Housing: ABS UL 94V-0
Back Box Housing: PVC
Face Plate Size: 86 x 86 mm (3.39" x 3.39")
Back Box Size: 85 x 85 mm (3.35” x 3.35”)
Face Plate Density: 1-Port and 2-Ports
Back Box Depth: 32mm, 42mm and 45mm
FPP-1-PP i-Net Networks Face Plate PVC White 1 Port
1 1—1 Port, 2—2 Port
PP—Plain Plate Plain Holder, PA—Plain Plate Angled Holder,

PP
EP—Aesthetic Plate Plain Holder, EA—Aesthetic Plate Angled Holder
FPA-PL i-Net Networks Face Plate Accessory
PL—Plain Plate, ES—Aesthetic Plate,

PH—Plain Holder, AH—Angled Holder,
PL
QB—Quarter Blank, HB—Half Blank
LM—Duplex Multimode LC Adapter, LS—Duplex Singlemode LC Adapter
BB-32 i-Net Networks Back Box 85x85 White 32mm Depth
32 32—32mm Depth, 42—42mm Depth, 45—45mm Depth
Category3 UTP Riser Solid Cable
Specification
Meets EIA/TIA 568-B for category 3 requirements

Description
Unshielded Copper cable, 10, 20, 30, 50, 100 pairs, category 3, solid.
Cable is used for indoor/outdoor installation
Material
Conductive material: soft annealed electrolytic copper

The cable jacket: PVC, PE with Jelly
Max DC Resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100 ft) Maximum voltage 300V
Max Resistance Unbalance 3% Characteristic Impedance 1-16 MHz 85Ω-115Ω
Max Capacitance unbalance – pair- Min Relative Velocity of Propagation
330pF/100m (101pF/100ft) 0.585
to-ground at 1kHz at 10 MHz
Max attenuation at 20°C (68°F) Min worst pair to pair NEXT loss at
At 772 kHz 2.2dB/100m (0.67dB/100ft) 772 kHz 43dB
At 1 MHz 2.6dB/100m (0.79dB/100ft) At 1 MHz 41dB
Min worst pair Structural Return Loss (SRL) upto 10 MHz-12dB; At 16 MHz-10dB
Parameters 10 Pair 20 Pair 30 Pair 50 Pair 100 Pair
0.41~0.51 mm 0.41~0.51 mm 0.41~0.51 mm 0.41~0.51 mm 0.41~0.51 mm

Conductor diameter
(26~24 AWG) (26~24 AWG) (26~24 AWG) (26~24 AWG) (26~24 AWG)
Insulated conductor diameter 0.9 mm (0.035") 0.9 mm (0.035") 0.9 mm (0.035") 0.9 mm (0.035") 0.9 mm (0.035")
Outer cable diameter 7.5 mm (0.295") 9.5 mm (0.374") 11 mm (0.433") 15 mm (0.590") 20.0 mm (0.787")
Jacket thickness 1.0 mm (0.039") 1.0 mm (0.039") 1.0 mm (0.039") 1.0 mm (0.039") 1.0 mm (0.039")
Maximum strand pitch 100 mm (3.937") 100 mm (3.937") 100 mm (3.937") 150 mm (5.9") 150 mm (5.9")
Minimum bend radius 6xØ 6xØ 6xØ 8xØ 8xØ
Conductor elongation Min 14% Min 14% Min 14% Min 14% Min 14%
Operating temperature -10°C to +50°C -10°C to +50°C -10°C to +50°C -10°C to +50°C -10°C to +50°C
Weight per Std. Pack 32.0 kg (70.55 lbs) 51.2 kg (112.9 lbs) 67.2 kg (148.1 lbs) 96 kg (211.6 lbs) 169 kg (372.6 lbs)
Standard package 500 m (1640 ft) 500 m (1640 ft) 500 m (1640 ft) 304.8 m (1000 ft) 304.8 m (1000 ft)
R34X-I-10 i-Net Networks Riser Indoor Cable Category3 UTP Solid 24AWG 10 Pair CMX
R36X-I-10 i-Net Networks Riser Indoor Cable Category3 UTP Solid 26AWG 10 Pair CMX
I I—Indoor PVC Milky Grey, J—Outdoor PE Jelly Filled Black, A—Outdoor PE Armored Black
10 10—10 Pair, 20—20 Pair, 30—30 Pair, 50—50 Pair, 1H—100 Pair
23
Category3 Telephone Patch Panel
Specification PP3-25 PP3-50
Meets ANSI/TIA/EIA-568-B.2 Category 5

Description Meets ANSI/TIA/EIA-568-B.2 Category 5

Modern design and simplicity of mounting
Standard size for mounting in 19" racks and cabinets Numeral marking of ports on the front side of the panel
This patch panel is designed for 22 - 26 AWG solid conductors Numeral marking of IDC modules on the rear side of the panel
Height: 1U (25 Ports), 2U (50 Ports) i-Net Networks patch cord usage provides the best connection
Vertical termination Dual IDC contacts provide minimal crosstalk
Telephone layout, 2 pairs for port 3,6,4,5 110 type punch down tool is used for cable termination
Material Electrical Characteristics
Housing: PC 94V-0 According to UL1863

IDC: PC UL94V-0 Current rating: 1.5À max
PCB: FR-4 1.6 mm (0.06") thick, 2 layers Voltage rating: 150V
Contacts: 0.35 mm (0.014") phosphor bronze with 1.27 micron (50 Contact resistance: 20MΩ
micro inches) gold plating contact area Insulation resistance: 500MΩ
Metal housing: 1.6 mm (0.06") thick of metal Dielectric withstand voltage: 1000V AC RMS, 60Hz/1min
PP3-25 i-Net Networks Telephone Patch Panel Category3 25 Port
25 25—25 Port, 50—50 Port
Category3 Telco Pigtail

Description
The plug & socket used to connect to telephone stations

Unshielded Copper cable, 25 pairs, category 3, solid
Cable termination with the help of crimping tool
Material
Conductive material: soft annealed electrolytic copper

Cable jacket: PVC
Housing: ABS black
Insulator: noryl/ polyphenylene oxide Electrical Characteristic
Pin contacts: phosphor bronze with gold plating Min Relative Velocity of Propagation at 10 MHz 0.585
Current rating Max 5A
Operating Characteristic
Dielectric strength 1000V / Minute
Temperature range: -67°F to +221°F (-55°C to +105°C) Insulator resistance 1000MΩ / Minute
Maximum cable diameter: 10 mm (0.4")
Contact resistance Max 20MΩ
TP3M-06 i-Net Networks Telco Pigtail Category3 25Pair 50Pin Male 6 Feet
06 06—6 Feet, 10—10 Feet, 16—16 Feet, 32—32 Feet
Category3 Keystone Jack

Description
Accepts 1, 2 or 3-pair solid conductor
Material

IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire
Structural Feature
According to UL1863
Conductor color code according to T568B and T568A
Current rating: 1.5A Max.
Contacts color marking of on the transparent module cover
Linear conductor layout
Contact resistance: 20MΩ
Conductor connection by simple cover latching
Insulation Resistance: 500MΩ
Dielectric Withstand Voltage: 1000V AC RMS, 60Hz/1min
KJ3-N-64 i-Net Networks Keystone Jack Category3 Non PCB 6P4C
KJ3-P-64 i-Net Networks Keystone Jack Category3 PCB 6P4C
Category3 Voice Distribution
Mounting Block
Multiples of 10 pair panel for voice interconnection wiring

Type: Wall, Rack, Floor Standing
Housing: ABS UL94V, Metal Housing
10 Pair Module
10-pair connection & disconnection modules

Housing: ABS/PBT
Contact: phosphor-bronze
Connection Cable
2-pole Test Cable, 6P2C

4-pole Test Cable, 6P4C
2-pole Test Cable, Alligator Clip
4-pole Test Cable, Alligator Clip
Housing: ABS/PBT
Contact: phosphor-bronze
V3W-050 i-Net Networks Voice DB Category3 Wall Mount 50Pair Unloaded
V3R-150 i-Net Networks Voice DB Category3 Rack Mount 150Pair Unloaded
V3R-300 i-Net Networks Voice DB Category3 Rack Mount 300Pair Unloaded
V3F-0690 i-Net Networks Voice DB Category3 Floor Standing 690Pair Unloaded
V3F-1380 i-Net Networks Voice DB Category3 Floor Standing 1380Pair Unloaded
V3M-C i-Net Networks Voice Module Category3 10Pair Connection
V3M-D i-Net Networks Voice Module Category3 10Pair Disconnection
V3C-R2 i-Net Networks Voice Cable Category3 RJ11 6P2C 6 Feet
V3C-A2 i-Net Networks Voice Cable Category3 Alligator 2-Pole 6 Feet
Category3 Surface Mount Outlet
Specification

Meets ISO/IEC generic cabling standard 11801
Meets CENELEC generic cabling standard EN50173
Material In accordance with UL1863

Current rating: 1.5A max
Housing: ABS UL94V-0 Voltage rating: 150V
IDC: PC UL94V-0 Contact resistance: 20MΩ
PCB: FR-4 1.6 mm (0.06") thick, 2 layers Dielectric withstand voltage: 1000 V AC RMS, 60Hz 1min
SM3-1-64 i-Net Networks Surface Mount Outlet Category3 1Port 6P4C
SM3-2-64 i-Net Networks Surface Mount Outlet Category3 2Port 6P4C
Category3 Modular Plug
Material
Housing: PC UL94-2
Contacts: copper alloy with 0.23 micron (6 micro inches) gold plating
P3-42 i-Net Networks Modular Plug Category3 4P2C
42 42—4P2C, 44—4P4C, 62—6P2C, 64—6P4C, 66—6P6C
25
Fiber Optic Indoor Cable
Specification
The cable meets EIA-TIA 455 and IEC-60794 1–Jacket

Optical characteristics meets ISO/IEC 11801 2–Hydrophobous Extender
Meets IEC 60332-1 fire safety standard 3–Fiber Optic
Description Material
Fiber optic cable, multi-mode and single-mode, 2 fibers Conductive material: optical fiber 9/125µ, 50/125µ, 62.5/125µ
General purpose indoor LAN cable Fiber insulation: tight buffer
Suitable for installation in a work area, premises wiring, patch cords Armoring and waterproofing: dielectric aramid strength yarns
Short distance data transmission Outer jacket: flame-retardant PVC (polyvinylchloride)
Fiber diameter 125 ± 1μm Tension force (operation) 250 N
The insulated fiber diameter 242 ± 7μm Crushing force 220 N/cm (558.8 N/in)
Fiber jacket diameter 0.9 mm (0.03") Impact resistance 1.5 N*m (4.92 N*ft)
Cable outer diameter 2.8 x 6.0 mm (0.11 x 0.24") Flexing resistance 1000 cycles
Fiber jacket tensile strength 1.3-8.9 N Cabling temperature -5°C – +50°C (+23°F – +122°F)
Fiber jacket out-of-roundness 1% or less Operation temperature -25°C – +75°C (-13°F – +167°F)
Minimum bend radius 42 mm (1.65") Storage temperature -25°C – +75°C (-13°F – +167°F)
Max. number of bends 10 000 times Weight of 1 km of cable 15.4 kg
Tension force (cabling) 450 N Standard packing 1000 m (3280.84 ft)
HIFLN-50-02 i-Net Networks Horizontal Indoor Fiber Cable Loose Tube Multimode 50/125µ 2 Core Non LSZH
HIFLL-50-02 i-Net Networks Horizontal Indoor Fiber Cable Loose Tube Multimode 50/125µ 2 Core LSZH
50 50—Multimode 50/125µ, 62—Multimode 62.5/125µ, 09—Singlemode 9/125µ
02 02—2Core
Fiber Optic FTTH (Fiber-To-The-Home) G.657A Dry Cable
Specification
The cable meets EIA-TIA 455 and IEC-60794

Optical characteristics meets ISO/IEC 11801
Meets IEC 60332-1 fire safety standard
Description
Fiber optic cable, single-mode, 2 fibers

General purpose FTTH indoor LAN cable
Suitable for installation in a home
Short distance data transmission
Cable Standard G.657A Weight 15 Kg/Km
Core 2 Attenuation dB/km ≤ 0.4 at 1310nm，≤ 0.3 at 1550nm
Type Singlemode 9/125µ Tensile Strength at 1500N, 10 Min ≤ 0.2 dB
Fiber Type Ø 0.25 Cable Twist at 10 cycles, 0.3m ≤ 0.2 dB
Size 0.4 mm x 2 (ea) Crush Strength at 5N/mm, 10 Min ≤ 0.2 dB
Outer Sheath Color Black Temperature –20℃ ~ 60℃, 6 hours ≤ 0.3 dB
Outer Sheath Material LSZH Certification RoHS
Outer Sheath Dimension 4mm x 2mm Standard Packing 1000 m (3280.84 ft)
HIFF-09-02 i-Net Networks Horizontal Indoor Fiber Cable FTTH Singlemode 9/125µ 2 Core
Fiber Optic Single Loose Tube Cable
Specification
Meets EIA/TIA-455 and EIA/TIA FOTP 82B

Meets IEC- 60794 and IEC-60794-1-F5 1–Jacket
Optical characteristics meets ISO/IEC 11801 2–Hydrophobous Extender
Meets IEC 60332-1 fire safety standard 3–Fiber Optic
Conducting material: fiber optic 9/125µ, 50/125µ, 62.5/125µ
Fiber optic cable, multi loose tube, 2 – 24 fibers Fiber insulation: Polybutylene Terephthalate module (tube)
General purpose LAN cable for Indoor and Outdoor Sheathing and waterproofing: waterproofing aramid strength yarns
Campus backbone and building riser cabling Module filling: filled with waterproofing thixotropic gel
Inter/Intra-building routing Outer sheathing: UVR-resistant polyethylene
Fiber jacket diameter 2.1 mm (0.08") Repeated impact resistance N = 20
Cable outer diameter 7.3 mm (0.29") Flexing resistance 25 cycles
Fiber jacket tensile strength 1.3-8.9 N Operation temperature -40°C – +75°C (-40°F – +167°F)
Fiber jacket out-of-roundness 1% or less Storage temperature -40°C – +75°C (-40°F – +167°F)
Minimum bend radius 146 mm (5.75") Weight of 1 km of cable 50~100 kg (110.23~220.46 lbs)
Tension force (cabling) 2700 N Standard bunch 2000 m (6561.6 ft)
RSLN-50-04 i-Net Networks Riser Cable Single Loose Tube Multimode 50/125µ 4 Core Non LSZH
RSLL-50-04 i-Net Networks Riser Cable Single Loose Tube Multimode 50/125µ 4 Core LSZH
04 04—4Core, 06—6Core, 08—8Core, 12—12Core, 24—24Core
Fiber Optic Multi Loose Tube Cable
Specification 1 – Jacket
2 – Polymer Tape
The cable meets EIA-TIA 455 and IEC-60794 3 – Fiber Optic
Optical characteristics meets ISO/IEC 11801 4 – Main Load-Bearing Element
Fiber optic cable, multi loose tube, 24 – 288 fibers Conductive material: optical fiber 9/125µ, 50/125µ, 62.5/125µ
General purpose LAN cable for Indoor and Outdoor Armoring and waterproofing: dielectric aramid strength yarns
Campus backbone and building riser cabling Outer jacket: UV-resistant Halogen Free Flame Retardant (HFFR)
Inter/Intra-building routing Central strength member: dielectric load-bearing element
Fiber jacket diameter 2.1 mm (0.08") Repeated impact resistance 300 cycles
Cable outer diameter 8.8/10.9/13.9 mm (0.35/0.43/0.55") Cabling temperature -20°C – +70°C (-4°F – +158°F)
Minimum bend radius 130/145/195 mm (5.12/5.71/7.68") Weight of 1 km of cable 75~400 kg (165.34~881.84 lbs)
RMLN-50-024 i-Net Networks Riser Cable Multi Loose Tube Multimode 50/125µ 24 Core Non LSZH
RMLL-50-024 i-Net Networks Riser Cable Multi Loose Tube Multimode 50/125µ 24 Core LSZH
024 024—24Core, 048—48Core, 096—96Core, 144—144Core, 192—192Core, 240—240Core, 288—288Core
27
Fiber Optic Armored Single Loose Tube Cable
1 – Jacket
Specification
2 – Armored band
3 – Rip-cord
Meets EIA/TIA-455 and EIA/TIA FOTP 82B 4 – Film
Meets IEC- 60794 and IEC-60794-1-F5 5 – Hydrophobous Extender
Optical characteristics meets ISO/IEC 11801 6 – Fiber optic
Conductive material: optical fiber 9/125µ, 50/125µ, 62.5/125µ
Fiber optic cable, single loose tube, 2 – 24 fibers Fiber insulation: Polybutylene Terephthalate module (loose tube)
Waterproof steel armored band, Armoring and waterproofing: Water Blocking Aramid Strength Yarns
General purpose LAN cable for Indoor and Outdoor Filler: Filled with Thixotropic gel protects from water corrugation
Campus backbone and building riser cabling Outer sheathing: UV-resistant polyethylene
Inter/Intra-building underground cabling Armor: corrugated steel band
Fiber diameter 125 ± 1μm Crushing force 800 N/cm (24384 N/ft)
The insulated fiber diameter 242 ± 7μm Repeated impact resistance N = 20
Fiber jacket diameter 2.1 mm (0.08") Flexing resistance 25 cycles
Cable outer diameter 11.9 mm (0.47") Cabling temperature -20°C – +70°C (-4°F – +158°F)
Minimum bend radius 238 mm (9.38") Weight of 1 km of cable 75~150 kg (165.34~330.69 lbs)
Tension force (operation) 1600 N
RASLN-50-04 i-Net Networks Riser Cable Armored Single Loose Tube Multimode 50/125µ 4 Core Non LSZH
RASLL-50-04 i-Net Networks Riser Cable Armored Single Loose Tube Multimode 50/125µ 4 Core LSZH
04 04—4Core, 06—6Core, 08—8Core, 12—12Core,24—24Core
Fiber Optic Armored Multi Loose Tube Cable
Specification 1 – Jacket
2 – Armored band
Meets EIA/TIA-455 and EIA/TIA FOTP 82B 3 – Film
Meets IEC- 60794 and IEC-60794-1-F5 4 – Polymer tape
Optical characteristics meets ISO/IEC 11801 5 – Rip-cord
Meets IEC 60332-1 fire safety standard 6 – Fiber optic
7 – Main load-bearing element
Material
Description Conductive material: optical fiber 9/125µ, 50/125µ, 62.5/125µ
Fiber insulation: Polybutylene Terephthalate module (loose tube)
Fiber optic cable, single loose tube, 24 – 288 fibers Armoring and Waterproofing: Waterproofing Tape
Waterproof steel armored band, Filler: Thixotropic gel which protects from water corrugation
General purpose LAN cable for Indoor and Outdoor Outer sheathing: UV-resistant polyethylene
Campus backbone and building riser cabling Armor: corrugated steel band
Inter/Intra-building underground cabling Central strength member: dielectric load-bearing element
Fiber diameter 125 ± 1μm Crushing force 3000 N/cm
The insulated fiber diameter 242 ± 7μm Repeated impact resistance N = 20
Fiber jacket diameter 2.1 mm (0.08") Flexing resistance 25 cycles
Cable outer diameter 14/ 15.7/ 16.8/ 18.9/ 21.5 mm Cabling temperature -20°C – +70°C (-4°F – +158°F)
Tension force (cabling) 3000 N Weight of 1 km of cable 100~600 kg (220.46~1322.75 lbs)
Tension force (operation) 1000 N Standard bunch 1000 m (3280.84 ft)
RAMLN-50-024 i-Net Networks Riser Cable Armored Multi Loose Tube Multimode 50/125µ 24 Core Non LSZH
RAMLL-50-024 i-Net Networks Riser Cable Armored Multi Loose Tube Multimode 50/125µ 24 Core LSZH
024 024—24Core, 048—48Core, 096—96Core, 144—144Core, 192—192Core, 240—240Core, 288—288Core
Fiber Optic Connector
Specification
Compatible with all NTT-FC/SC standards
CE-50-C i-Net Networks Fiber Optic Connector Epoxy Multimode 50/125µ SC
T T—ST, C—SC, L—LC
Fiber Optic Adapter
Description
• Terminated with metal stopper and screws

• Polymeric caps protect the adapters against dust
• Allows easy identification
• Singlemode adapters come with white (FC) and blue (SC) caps
• Multimode adapters come with black (FC) and beige (SC) caps
• FC, SC, ST adapters are inline and they are used for the precise
centre positioning of connectors’ ferrules in special sleeves
• Centre positioning in MTRJ adapters is performed using guiding
pins and the ferrules are centre positioned in special sleeves
Material
Nickel brass, plastic

Phosphor bronze centre sleeve
Technical Specification
Insertion loss: 0.3 dB

Storage temperature: –40°C to +80°C (–40°F to +176°F)
Operating temperature: –20°C to +70°C (–4°F to +158°F)
Maximum permissible humidity: 95%
AS-M-TT i-Net Networks Fiber Optic Simplex Adapter Multimode ST-ST
AD-M-TT i-Net Networks Fiber Optic Duplex Adapter Multimode ST-ST
M M—Multimode, S—Singlemode
TT TT—ST-ST, CC—SC-SC, LL—LC-LC, FF—FC-FC, MM—MTRJ-MTRJ, TC—ST-SC, CL—SC-LC, LF—LC-FC
Fiber Optic Patch Panel & Splice Unit
PPFD-EU i-Net Networks Fiber Patch Panel Duplex Empty Universal
EU EU—Empty Universal, 2T—24Core ST, 2C—24Core SC, 2L—24Core LC, 4T—48Core ST, 4C—48Core SC, 4L—48Core LC
PPFA-C i-Net Networks Fiber Optic Adapter Panel SC for PPFD-EU
C T—ST, C—SC, L—LC, R—RJ45
STF-W-048 i-Net Networks Fiber Optic Splicing & Termination Unit Wall Mount 48 Core
W W—Wall Mount, U—Underground
048 048—48 Core, 096—96 Core, 192—192 Core, 288—288 Core
29
Fiber Optic Patch Cord
Description
IEC 60874-10, TIA/EIA-604-2, Telcordia GR-326-CORE

Specification
Ferrule Outer Diameter 1.25mm, 2.5mm (+0.0005mm), 125~125.5, 126~127
SM 9/125µ Ferrule Zirconia
Cord
MM 50/125µ, 62.5/125µ Spring Stainless Steel
Type ST, SC, LC, FC, MTRJ C-ring SK5M
Connector Boot Color Yellow, Blue, Black, Green, Beige Ring Brass
Hood 0.9mm, 2.0mm, 2.4mm, 3.0mm Crimping ring Aluminum
Insertion Loss SM: <0.3 dB, MM: <0.4 dB Materials Boot Kay Flex
Return Loss > 45 dB Dust cap PE (Black, White, Yellow)
Technical
Charac- End Face Radius 10 mm <R< 25 mm (0.39''<R<0.98'') Coupling Device PBT
teristics
Apex Offset < 0.002'' (50 μm) Frame PBT
Operating Temperature -40°C to +85°C (-40°F to 185°F) Washer -
Length 1m (3.28ft), 2m (6.56ft), 3m (9.84ft), 5m (16.4ft), 10m (32.8ft) Cable LSZH
PCD50P-TT-01 i-Net Networks Fiber Patch Cord Duplex Multimode 50/125µ PC ST-ST 1m
PCD62P-TT-01 i-Net Networks Fiber Patch Cord Duplex Multimode 62.5/125µ PC ST-ST 1m
PCD09P-TT-01 i-Net Networks Fiber Patch Cord Duplex Singlemode 9/125µ PC ST-ST 1m
PCD50A-TT-01 i-Net Networks Fiber Patch Cord Duplex Multimode 50/125µ APC ST-ST 1m
PCD62A-TT-01 i-Net Networks Fiber Patch Cord Duplex Multimode 62.5/125µ APC ST-ST 1m
PCD09A-TT-01 i-Net Networks Fiber Patch Cord Duplex Singlemode 9/125µ APC ST-ST 1m
TT—ST-ST, TC—ST-SC, TL—ST-LC, TF—ST-FC, TM—ST-MTRJ

CC—SC-SC, CL—SC-LC, CF—SC-FC, CM—SC-MTRJ
TT LL—LC-LC, LF—LC-FC, LM—LC-MTRJ
FF—FC-FC, FM—FC-MTRJ
MM—MTRJ-MTRJ
01 01—1meter, 02—2meter, 03—3meter, 05—5meter, 10—10meter
Fiber Optic Pigtail

Description
Compliant with Telcordia, TIA/EIA/IEC

Specification
SM 125~125.5 Ferrule Zirconia Ceramic
Ferrule Outer Diameter
MM 126~127 Spring Stainless Steel
SM 9/125µ C-ring SK5M
Cord
MM 50/125µ, 62.5/125µ Ring Brass
Type ST, SC, LC, FC Crimping ring Aluminum
Connector
Boot Color Yellow, Black Materials Boot Kay Flex, Santopren
Insertion Loss SM < 0.3 dB, MM < 0.4 dB Dust cap LD PE
Return Loss > 45 dB, Coupling Device Brass
End Face Radius 10 mm < R < 25 mm Frame PBT
Apex Offset < 50 mm Washer Brass
Length 1m (3.28ft), 2m (6.56ft), 3m (9.84ft) Cable LSZH
PTS50P-T-1 i-Net Networks Fiber Pigtail Simplex Multimode 50/125µ PC ST 1m
PTS62P-T-1 i-Net Networks Fiber Pigtail Simplex Multimode 62.5/125µ PC ST 1m
PTS09P-T-1 i-Net Networks Fiber Pigtail Simplex Singlemode 9/125µ PC ST 1m
PTS50A-T-1 i-Net Networks Fiber Pigtail Simplex Multimode 50/125µ APC ST 1m
PTS62A-T-1 i-Net Networks Fiber Pigtail Simplex Multimode 62.5/125µ APC ST 1m
PTS09A-T-1 i-Net Networks Fiber Pigtail Simplex Singlemode 9/125µ APC ST 1m
T T—ST, C—SC, L—LC, F—FC, M—MTRJ
1 1—1meter, 2—2meter, 3—3meter
Coaxial Cable
1 – Jacket 1 – Jacket 1 – Jacket

2 – Shield-braid 2 – Shield-braid 2 – Shield-braid
3 – Shield-foil 3 – Shield-foil 3 – Shield-foil
4 – Dielectric 4 – Dielectric 4 – Dielectric
5 – Conductor 5 – Conductor 5 – Conductor
Cable Type RG6 RG11 RG59
Wave impedance 75Ω 75Ω 75Ω
Conductor diameter 1.02 mm (0.04") (18 AWG) 1.62 mm (0.06") (14 AWG) 0.81 mm (0.03") (20 AWG)
Dielectric diameter 4.57 mm (0.18") 7.11 mm (0.28") 3.66 mm (0.14")
Outer jacket thickness 0.8 mm (0.031") 1.1 mm (0.04") 0.9 mm (0.035")
Outer cable diameter 6.9 mm (0.27") 10.16 mm (0.4") 6.02 mm (0.24")
Shield 0.16 mm (0.006") 65% 0.18 mm (0.007") 65% 0.16 mm (0.006") 65%
Test frequency up to 3 GHz up to 3 GHz up to 1 GHz
Voltage rating 3000 V 5000 V 2300 V
Temperature range -20°C – +80°C (-4°F – +176°F) -20°C – +80°C (-4°F – +176°F) -20°C – +80°C (-4°F – +176°F)
Weight per 1000 ft (304.8 m) 14 kg (30.9 lbs) 30.2 kg (66.5 lbs) 10.7 kg (23.5 lbs)
Standard packing 1000 ft (304.8 m) 1000 ft (304.8 m) 1000 ft (304.8 m)
HIRG-06-65 i-Net Networks Horizontal Indoor Coaxial Cable RG6 65% Braid
06 06—RG6, 11—RG11, 59—RG59
65 65—65% Braid
Coaxial Plug
Materials
Housing - nickel-plated zinc

Center conduct - gold-plated brass
Insulator - POM
Rubber washer - PVC
Washer - nickel-plated iron
Sleeve - nickel-plated brass RG11 RG6 BT3002
PBM-S-06 i-Net Networks Coaxial Plug BNC Male Solder RG6
S S—Solder, C—Crimp
06 06—RG6, 11—RG11, 59—RG59, 32—BT3002
Coaxial Patch Panel Coaxial Adapter
Ordering Information Ordering Information

PPC-BF-24 i-Net Networks Coaxial Patch Panel 24 Port Unloaded AC-BS-F i-Net Networks Coaxial Adapter BNC-S Female
24 24—24 Port, 48—48 Port BS BS—BNC-S, BT—BNC-T
PPCA-BF i-Net Networks Coaxial Patch Panel Adapter BNC Female F F—Female, M—Male
Bal-Un (Balanced to Unbalanced) Dual G.703 75Ω-120Ω

BU-D-BF—i-Net Networks Bal-Un Dual G703 BNC Female
T1 (1.5Mbps) or E1 (2Mbps) up to 32Mbps Data Rate
75Ω Dual Coaxial to 120Ω Twisted Pair 50µ Glod Plated
Exceeds CCITT G.703 Specifications and IEEE Standards
Insertion Loss <0.5 dB
Return Loss <16 dB
Cross Talk <60 dB
Bidirectional Signal Transmission
Passive device, No power required
31
Wall Mount Cabinet
Feature
Adjustable profile, single & double sections

Reliable structure and easy wall-mounting installation
Removable side panels with hinged locks
Cable entry on top cover and bottom panel
Top mounted fan
Standard
ANSI/EIA RS-310-D, DIN41494, part 1, IEC297-2, DIN41494, part 7

Height: 4U, 6U, 9U, 12U, 15U, 18U
Width: 600mm
Standard depth: 450mm, 550mm
Customized depth: 100mm~300mm
Package: Assembled/Unassembled
Material
SPCC cold rolled steel Package

Thickness: 19" profile-0.06" (1.5mm), others-0.05" (1.2mm)
Front Glass Door (FGD)
Quick Open Side Door (QOSD)
Surface Finish Two Adjustable 19" Profile (2AP)
One Top Mounted 1 Fan (CAF-200A) (only for 450mm & 550mm)
Black, Degreasing, pickling, phosphoric, powder coated Lock with Key (CAL-SD)
Ten Cage Nut (CACN-1 x 10)
CWS-04-45 i-Net Networks Cabinet Wall Mount Black Single Section 4U 600x450mm
CWD-04-55 i-Net Networks Cabinet Wall Mount Black Double Section 4U 600x550mm
04 04—4U, 06—6U, 09—9U, 12—12U, 15—15U, 18—18U
45 15—150mm, 20—200mm, 25—250mm, 30—300mm, 45—450mm, 55—550mm
Floor Standing Cabinet

Feature
• Easy to assemble flat pack or fully assembled

• Connected by four-corner to ensure the intensity
• Exquisite design with precise craftsmanship
• Toughened glass or vented front door
• Adjustable feet and heavy duty castors
• Top and bottom panel for cable entry
• Removable side panel
• High-density vented rear door
Standard
ANSI/EIA RS-310-D, IEC297-2, DIN41491 part 1, DIN41494

Height: 15U, 18U, 22U, 27U, 32U, 37U, 42U, 47U
Width: 600mm and 800mm
Depth: 600mm, 800mm, 1000mm
Package: Assembled/Unassembled
Material
Frame: Steel
Others: SPCC cold rolled steel
Thickness: Profile - 0.08" (2.0 mm), Angle - 0.06" (1.5 mm),
Side Panel -0.03" (0.8 mm), others - 0.05" (1.2 mm) Main Structure
Front glass (FGD) or vented (FPMD) door

Loading Capacity Quick open side door (QOSD)
Four adjustable profile (4AP)
Static loading: up to 400kg (15U~27U), up to 800kg (32U~47U) Two vertical cable manager (CAWM-V-C x 2)
Light duty castor (LDC) (15-22U), Heavy duty castor (HDC) (27-47U)
Twenty five cage nut (CACN-1 x 25)
Surface Finish Four top mounted fans (4F)
Lock with key (CAL-SD)
Black, Degreasing, pickling, phosphoric, powder coated Adjustable stopper feet (SF)
CFG-15-6060 i-Net Networks Floor Cabinet Black Front Glass Door 15U 600x600mm
CFM-15-6060 i-Net Networks Floor Cabinet Black Front Perforated Metal Door 15U 600x600mm
15 15—15U, 18—18U, 22—22U, 27—27U, 32—32U, 37—37U, 42—42U, 47—47U
6060 6060—600x600mm, 6080—600x800mm, 601K—600x1000mm, 8080—800x800mm, 801K—800x1000mm
Open Floor Cabinet
Description
Open Cabinet is intended for installation of equipment which does not

require full housing. It is also used in instances when equipment is
placed in an air-conditioned room. Construction is based on assem-
bled 19” single frame, fixed by screws to the rack base. The base has
openings for anchor bolts to brace the rack to the floor.
Construction
Surface Finish Vertical post

Base
Textured powder paint, light gray (RAL 7035) and black (RAL 9005) Cross profile
COS-27-60 i-Net Networks Cabinet Open Black Single Frame 27U
COD-27-60 i-Net Networks Cabinet Open Black Double Frame 27U
27 27—27U, 42—42U
60 60—600mm Depth, 80—800mm Depth, 1K—1000mm Depth (only for double frame open cabinets)
Cabinet Accessories
CAFS-20-1 Front Mount Fixed Shelf 200mm 1U

20—200mm, 30—300mm, 40—400mm CARS-45 Front & Rear Mount Fixed Shelf for 450mm CABP-1 Blank Panel 1U
1—1U, 2—2U 45—450mm,60—600mm, 80—800mm, 1K—1000mm 1—1U, 2—2U, 4—4U
CARP-1 Brush Panel 1 Section

CAWM-H-CR Horizontal Wire Manager with Ring 1—1 Section, 2—2 Section
CASS-45 Sliding Shelf for 450mm H—Horizontal, V42—Vertical 42U
45—450, 60—600, 80—800, 1K—1000
CAP3-06-M Power Distribution Unit 13A 6Way IEC320 UK Plug

06—6Way, 10—10Way
M—Metal, P—Plastic CADT-1 Digital Temperature Unit 1 CACN-1 Cage Nut
33
Media Converter
Description
The media converter complies with IEEE802.3 Ethernet Standards as well as

RS232/422/485 Communication Standards and it is designed to convert interface
between Fast Ethernet, Gigabit Ethernet & Communication Signals. On the
Twisted Pair interfaces the media converter automatically identifies polarity.
Fast Ethernet or Gigabit Ethernet of Multi-mode and Single-mode media conver-

sion is available at distances at 550m/2Km and 20/40/60/80/100/120 Km re-
spectively.
The media converter is also available in 19” rack chassis with slide in modules.
Converter is transparent to all protocols. With Link Fault Pass Though, the link
status on Twisted Pair port is propagated to the remote network. The media
converters are dual Fiber operates at 850nm/1300nm/1310nm/1550nm.
Feature
10/100Mbps; 10/100/1000Mbps with Full/Half duplex automatically configure in Twisted Pair port
RS485 signal flow auto-recognition of speed 0~115.2 Kbps with auto negotiation
RS485 support 128 nodes and RS422 support 64 nodes
Compliant with RS232/422/485 Communication standards and stable transmission
Compliant with IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX; IEEE 802.3z/ab 1000Base-T standards
Compliant with 100Base-FX; 1000Base-SX/LX standards
MDI/MDI-X Auto Negotiation
LED Indicators for POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
Supports LLR (Link Loss Return) for FX Port
Supports LFP (Link Failure Pass) function
Optional 19” System Chassis
Slide in Modules & Wall-Mountable
FCC Class A & CE approved
Specification
Wavelength Distance
850nm, 1300nm, 1310nm & 1550nm Multi-mode 550m/2Km (conditions apply)
Single-mode 20Km/40Km/60Km/80Km/100Km/120Km (conditions apply)
Fiber Cable
50/125, 62.5/125, 100/140 Multimode Bandwidth & Performance
8.3/125, 8.7/125, 9/125 or 10/125 Single-mode Built-in 2MB Buffer Memory
High Performance 1.4Gbps for 10/100Base-Tx & 2Gbps for 10/100/1000Base-Tx
Interface
Copper: RJ45 Power Supply
Serial: RS232/422/485 9V/12V DC Adapter
Optical Fiber: SC, ST, LC 110V to 240V AC 50 to 60Hz
Power: AC UK Plug
Environment
Relative humidity: 5% to 90%
Operating temperature: 0 to 60
Storage temperature: -20 to 70
MCRU-16 i-Net Networks Media Converter Rack Unit Empty 16 Slots AC UK
MCSF-RJ45-M02C i-Net Networks Media Converter Standalone 100 Mbps Twisted Pair RJ45 Multimode 2KM SC AC UK Plug
MCSG-RJ45-M55C i-Net Networks Media Converter Standalone 1000 Mbps Twisted Pair RJ45 Multimode 550m SC AC UK Plug
MCRF-RJ45-M02C i-Net Networks Media Converter Rack Module 100 Mbps Twisted Pair RJ45 Multimode 2KM SC AC UK Plug
MCRG-RJ45-M55C i-Net Networks Media Converter Rack Module 1000 Mbps Twisted Pair RJ45 Multimode 550m SC AC UK Plug
RJ45 RJ45—Twisted Pair RJ45, 2348—RS232/485, 5062—Multimode
M55C—Multimode 550m SC (for 1000Mbps), M02C—Multimode 2KM SC (for 100Mbps),

M02C S20C—Singlemode 20KM SC, S40C—Singlemode 40KM SC, S60C—Singlemode 60KM SC,
S80C—Singlemode 80KM SC, S1HC—Singlemode 100KM SC, SH2C—Singlemode 120KM SC
Ethernet Switch
Description
The Ethernet Switch provides 10/100Mbps Auto-Negotiation RJ45

ports. All ports support Auto MDI/MDIX function, eliminating the need
for crossover cables or Uplink ports. The Switch is Plug-and-Play and
can be simply plugged into a server, a hub or a switch. The Switch
delivers superior performance.
Feature
• Complies with IEEE802.3, IEEE802.3u standards.

• Supports IEEE802.3x flow control for Full Duplex mode and back-
pressure for half-duplex mode.
• 10/100Mbps Auto-Negotiation RJ45 ports supporting Auto-MDI/
MDIX.
• Supports Store and Forward with independent port bandwidth.
• Supports MAC address auto-learning and auto-aging.
• LED indicators for monitoring Power, Link, Activity.
• Plastic/Metal case, desktop/wall-mounting design.
• External/Internal Power Adapter supply.
Specification
Standards IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
10Base-T: UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ù STP (maximum 100m)
Network Media
100Base-Tx: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ù STP (maximum 100m)
Number of Ports 8, 24, 48
LED indicators 10/100M Link/Act and Power
Transfer Method Store-and-Forward
Switching Capacity 8 Port—1.6G; 24 Port—4.8G and 48 Port—9.6G
MAC Address 4K (8 Port), 8K (24 and 48 Ports)
MAC Address Learning Automatic learning, Automatic Update
Frame Filtering and Forward Rate 10Mbps: 14880pps, 100Mbps: 148800pps
Dimensions (W×D×H) 180×104×30mm (8 Port), 440×205×44mm (24 and 48 ports)
Operating Temperature: 0 C~40 C (32 F~104 F)

Storage Temperature: -40 C~70 C (-40 F~158 F)
Environment
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing
Input Power 180-260V AC 50-60Hz
Mounting 8 Port — Table Top or Wall Mount; 24 and 48 Ports — 19” Rack Mount
ES-F08-000 i-Net Networks Ethernet Switch 10/100 Mbps 8 Port Desktop 220/110V DC Adapter UK
ES-F24-000 i-Net Networks Ethernet Switch 10/100 Mbps 24 Port 19" Rack Mount 220/110V AC UK
ES-F48-000 i-Net Networks Ethernet Switch 10/100 Mbps 48 Port 19" Rack Mount 220/110V AC UK
35

I-NET Catalog

Uploaded by

Copyright:

Available Formats

I-NET Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

I-NET Catalog

Uploaded by

Copyright:

Available Formats

Product Catalog

Category6A UTP Solid Indoor Cable - Page 04

Category6 UTP Solid Indoor Cable - Page 06

Category5e UTP Solid Indoor Cable - Page 15

Universal Modular Face Plate & Back Box - Page 22

Category3 Riser UTP Solid Cable - Page 23

Fiber Optic Indoor Cable - Page 26

Coaxial Cable - Page 31

Wall Mount Cabinet - Page 32

Media Converter - Page 34

Meets ISO/IEC 11801 & IEC 61156-5, category 7 requirements

Shielded Copper cable, 4 pairs, Category 7, Solid, 600MHz

Conductor diameter: 0.64 mm (0.025") (22 AWG)

Conductor resistance at 20°C (68°F) 80.0 Ohm/km (128.75 Ohm/mile)

M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow

Meets ANSI/EIA/TIA 568-B.2-10 requirements

Conductive material: Soft annealed electrolytic copper

Dielectric strength 2.5kV/3 seconds

M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow

C C—CM, L—LSZH, P—Plenum

Specification KJ6A-U-TL KJ6A-U-PM

Meets ANSI/EIA/TIA 568-B.2-10, IEEE802.3an

It is designed for 22-26 AWG solid conductors

PD PD—Punch Down, TL—Tool Less, PM—Panel Mount, FM—Floor Mount

Category6A Unshielded Patch Cord

Meets ANSI/EIA/TIA 568-B.2-10 requirements

M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow

03 03—3 Ft, 06—6 Ft, 10—10 Ft, 16—16 Ft

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Unshielded copper cable, 4 pairs, category 6, solid

Conductive material: Soft annealed electrolytic copper 1 – Jacket

Conductor diameter: 0.56-0.51 ± 0.01 mm (23-24 AWG)

Conductor resistance at 20°C (68°F) 9.38Ω100m (2.9Ω/100ft)

M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow

C C—CM, L—LSZH, P—Plenum

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Unshielded Copper, 4 pairs, category 6, stranded

Conductive material: wire made of soft annealed electrolytic copper

Conductor diameter: 7 x 0.2 mm ± 0.01 mm (7" x 0.008" ± 0.0004") (24 AWG)

Conductor resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100ft)

M M—Milky Gray, B—Blue, L—Black, G—Green, R—Red, Y—Yellow

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Conductive material: wire made of soft annealed electrolytic copper

Conductor diameter: 0.56-0.51 ± 0.01 mm (23-24 AWG)

Conductor resistance at 20°C (68°F) 9.38Ω/100m (2.86Ω/100ft)

C C—CM, L—LSZH, P—Plenum

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Conductive material: wire made of soft annealed electrolytic copper

Conductor diameter: 0.56-0.51 ± 0.01 mm (23-24 AWG)

Max conductor resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100ft)

C C—CM, L—LSZH, P—Plenum

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Conductive material: wire made of soft annealed electrolytic copper

Conductor diameter: 0.56-0.51 ± 0.01 mm (23-24 AWG)

Max conductor resistance at 20°C (68°F) 9.38Ω/100m (2.9Ω/100ft)

C C—CM, L—LSZH, P—Plenum

Meets ANSI/EIA/TIA 568-B.2-1 requirements

Shielded Copper cable, 4 pairs, category 6, solid

Conductive material: wire made of soft annealed electrolytic copper 1 – Jacket