MS.50015
MS.50015
com
BROCANI GRAZIANO - graziano.brocani@crf.it
MS.50015
FCA Italy Class: TMD
THERMOPLASTIC VULCANIZATES -
EPDM/PP FCA US Doc. Type: MS
Page: 1/2
Date: 30-SEP-2016
Co-Author
Author
HARMONIZED DOCUMENT
FCA ITALY -- GROUP MATERIALS LABS (CRF) - POLYMERS & GLASS
B 20-MAY-2016
INFORMATION section of MS-AR-100
Editorial changes : Added a watermark to indicate that the FCA
C 30-SEP-2016 specifications are part of a harmonized norm; updated to the new
corporate identity
Co-Author Department
Author Department
ANY PRINTED COPY IS TO BE DEEMED AS UNCHECKED; THEREFORE THE UPDATED COPY MUST BE CHECKED IN THE APPROPRIATE WEB SITE
CONFIDENTIAL
THIS DOCUMENT MUST NOT BE REPRODUCED OR CIRCULATED TO THIRD PARTIES WITHOUT PRIOR WRITTEN CONSENT BY FCA Italy S.p.A. and FCA US LLC..
IN CASE OF DISPUTE, THE ONLY VALID REFERENCE IS THE ENGLISH EDITION
FCA Italy S.p.A. Page: 2/2
FCA US LLC MS.50015
Change Level: C
Conditions of Usage
This harmonized specification is divided into two parts. The requirement on which part is to be followed is
indicated below or can be specified directly in the component Product Sheet or in the Drawing.
Part A: This part has to be applied whenever the component is on a FCA US family branded vehicle
(Chrysler, Dodge, Ram or Jeep) and/or on a vehicle sold in the NAFTA market or whenever the climatic
conditions of the sales market require it.
MS-AR-100_MS.pdf
Part B: This part has to be applied whenever the component will be part of a vehicle that will be
commercialized ONLY in the EMEA, LATAM or APAC markets, or whenever the restrictions of Part A are
not required.
5524802 Rev C_
MS.50015_EN.pdf