Fluidum PC180-4

Fluidum PC180
High-Range PCE Based Concrete Superplasticizer

Comply to ASTM C494 Type A , F and G, and BS EN 934-2
DESCRIPTION
Fluidum PC180 is a new generation superplasticizer based on Polycarboxylate technology. It is designed to provide a
Moderate to high performance of water reduction for high strength concrete, while providing excellent fluidity during
placement and extreme slump retention without affecting initial setting time. It is especially designed for concretes used
at high temperatures and shows better water reducing effects and slump retention than existing water reducer.
TYPICAL PROPERTIES EFFECTS OF OVERDOSING
Appearance: : Brownish Viscous Liquid. The effects of overdosing Fluidum PC180 are a function of
Specific Gravity: 1.07 at 25 ± 1ºC. the degree of overdose. When concrete has been
Chloride Content: Nil according to BS 5075. produced, which has been overdosed, the level of
workability will increase and may under certain situations
lead to segregation of the mix. Setting time may also
increase, especially if the overdosed concrete is
COMPATIBILITY subjected to low ambient temperatures, or if sulfate
resisting or certain pozzolanic cements are employed.
With Cements:
Fluidum PC180 can be used with all types of Portland

DISPENSING
cements as well as Pozzolanic Cements, Ground
Granulated Blast Furnace Slag (GGBFS), Micro Silica and It is preferable that Fluidum PC180 should be introduced
Fly Ash. For use with other special cements or SCM , we into the mixer by means of independent automatic
recommend you contact Arkaz Technical Service dispensing equipment. Such equipment or advice on
Department. dispensing can be obtained from Arkaz.
With Other Admixtures:
Fluidum PC180 performance will be affected by the

presence of other chemical admixtures, therefore in such
METHOD OF USE
case it is necessary to assess performance under site
conditions using actual materials to determine optimum Fluidum PC180 is supplied ready for use. It should be
performance, we advise that all admixtures be added added to concrete mixes either during the mixing cycle
separately into the mix. or at the same time as the water, or alternatively it should
be added in its supplied form to a normal concrete mix a
We recommend Arkaz Technical Service Department be few minutes before the pour is made. In the latter case,
contacted for Advice in these circumstances. further mixing should be provided to ensure complete
dispersion.
ADDITION RATES
Range:
0.5%-3% (v/w) by wt. of cement
As with most products of this type the magnitude of the

effect obtained with Fluidum PC180, is governed by the
quantity of product used, W/C ratio, and the specific
nature of the concrete and constituent materials.
It is necessary therefore to assess performance under site

conditions using actual materials to determine optimum
performance and dosage.
For advice and assistance with trials we recommend that

you contact Arkaz.
1
PACKAGING
Fluidum PC180 is supplied in 210 non-returnable drums.

Alternatively, 1,000-liter totes and bulk deliveries can be
arranged.
HEALTH AND SAFETY
For further information, please Check Product Material

Safety Data Sheet or consult Arkaz Technical
Department.
STORAGE & SHELF LIFE
Fluidum PC180 should be stored in original containers or

suitable closed tanks preferably away from extremes of
temperature. The product should always be kept in
shaded storage.
Storage Life in Manufacturer’s Drums:

12 months from date of manufacture.
Storage Life in Bulk Storage:

12 months from date of delivery.
TECHNICAL SERVICE
The technical service department of Arkaz is available to assist in the correct and best use of our products, these resources and advice are at your disposal
entirely without obligation.
Please contact:
concretedoctor@arkaz.com
LEGAL DISCLAIMER
The information given is based on data and knowledge considered to be true and accurate and is offered for the user’s consideration, investigation and
verification. Since the conditions of use are beyond our control, we do not warrant the results to be obtained. Please read all statements, recommendations or
suggestions in conjunction with our conditions of sale including those limiting warranties and remedies which apply to all goods supplied by us. No statement,
recommendation or suggestion is intended for any use which would violate or infringe statutory obligations or any rights belonging to a third party.
These products may be covered by patents or patents pending.

Copyright 2021
Printed in K.S.A. Version 2.0
ISO 45001
4-March-2021

Fluidum PC180-4

Uploaded by

Copyright:

Available Formats

Fluidum PC180-4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Fluidum PC180-4

Uploaded by

Copyright:

Available Formats

Fluidum PC180

High-Range PCE Based Concrete Superplasticizer

TYPICAL PROPERTIES EFFECTS OF OVERDOSING

Fluidum PC180 can be used with all types of Portland

With Other Admixtures:

Fluidum PC180 performance will be affected by the

0.5%-3% (v/w) by wt. of cement

As with most products of this type the magnitude of the

It is necessary therefore to assess performance under site

For advice and assistance with trials we recommend that

Fluidum PC180 is supplied in 210 non-returnable drums.

HEALTH AND SAFETY

For further information, please Check Product Material

STORAGE & SHELF LIFE

Fluidum PC180 should be stored in original containers or

Storage Life in Manufacturer’s Drums:

Storage Life in Bulk Storage:

These products may be covered by patents or patents pending.

You might also like