Series: A Space-Saving Air Cylinder With Multiple Surfaces Capable of Mounting Directly. Offered in Rich Variations

Free Mount Cylinder
CU Series
A space-saving air cylinder with multiple surfaces capable of mounting

directly. Offered in rich variations.
Space-saving Mounting
The multiple surface direct Axial mounting Vertical mounting Lateral mounting
(Body tapped) (Body through-holes) (Body through-holes)
mounting with a square body
and no brackets allows the
freedom of the mounting
surface.
This enables space-saving
designs for equipment.
CUJ
Series Variations CU
Series Action Rod Bore size (mm) Page
Standard Double acting
Single rod 623 CQS
CU Series Double rod 630
Single rod JCQ
Single acting 635
(Spring return/Extend)
Non-rotating Single rod 642 CQ2
Double acting
CUK Series Double rod 646
Single rod RQ
Single acting 650
(Spring return/Extend)
6, 10, 16, 20, 25, 32 CQM
Long stroke
CU Series Double acting Single rod 656 CQU
MU
Long stroke,
Non-rotating rod Double acting Single rod 660
CUK Series
With air cushion

CU-A Series Double acting Single rod 20, 25, 32 664
D-
For vacuum
ZCUK Series Double acting Single rod 10, 16, 20, 25, 32 673 -X
Technical
Data
619
Combinations of Standard Products and Made
CU Series
Standard Series CU CUK

Made to Order specifications (Standard) (Non-rotating)
Special product (Contact SMC for details.) Action/ Double acting Single acting Double acting Single acting
Not available Type
Single rod Double rod Single rod Single rod Double rod Single rod
Applicable
Symbol Specification bore size ø6 to ø32
Standard Standard      
ø6 to ø32
D Built-in magnet      
10-, 11-,
21-, 22-
Clean series ø6 to ø25  — — — — —
25A- Copper (Cu) and zinc (Zn)-free Note 3) ø10 to ø32      
20- Copper Note 2) and Fluorine-free ø6 to ø32      
XB6 Heat-resistant cylinder (–10 to 150 °C) 

  — 
  —
XB7 Cold-resistant cylinder (– 40 to 70 °C) 

  — 
  —
XB9 Low-speed cylinder (10 to 50 mm/s) Note 1) 

  — 
  —
XB13 Low-speed cylinder (5 to 50 mm/s) Note 1) ø6 to ø32 

  — 
  —
XC19 Intermediate stroke (5 mm spacer) 

  — 
  —
XC22 Fluororubber seals 

  
 
  

XC34 Rod not extending beyond non-rotating plate — — — 

  

Note 1) Refer to Best Pneumatics No. 2-3 for low-speed cylinders.

Note 2) Copper-free for the externally exposed part. For details, refer to the Web Catalog.
Note 3) For details, refer to the SMC website.
620
to Order Specifications
CU Series
CU CUK CU-A ZCUK CUX

(Long stroke) (Long stroke, Non-rotating) (Air cushion) (For vacuum) (Low-speed cylinder) Note)
Double acting Double acting Double acting Double acting Double acting
Single rod Double rod Single rod Double rod Single rod Single rod Single rod
ø6 to ø32 ø20 to ø32 ø10 to ø32
      
      
— — — — — — 
(ø16 or more)
      —
      —

  
  —  —

  
  —  —
CUJ

  
  —  —
CU

CQS
  
  —  —
JCQ

  
  —   CQ2
RQ

  
  —  —
CQM
CQU
— — 
  —  —
MU
D-
-X
Technical
Data
621
CU Series
Precautions on Free Mount

1. Operating speed
Make sure to connect a speed controller to the cylinder and adjust its speed to 500 mm/s or less.
If a load is to be attached to the end of the rod, adjust the speed to the maximum speed shown in Graph (1) or less, in accordance with the added mass.
Graph (1) Load Mass and Maximum Speed
100
How to read the graph
50
• Using the CU10 to drive a load weighing 2.5 kg: From the vertical axis in
ø3
2 the graph on the left, extend the horizontally from 2.5 kg., and drop down
ø2
5 from the point at which it intersects with the tube bore ø10. The maximum
ø2
10 0 speed will be 141 mm/s.
5 ø1
6
Load mass (kg)
(2.5) ø1
ø6 0
[Do
ø6 ub
le
[S ac
1 ing tin
g (D
le ), S
ac ing
tin le
0.5 g, ac
Sp tin
rin g,
g Sp
ex rin
te g re
nd turn
(T (S)]
)]
0.1
0.05
0.01
50 100 (141) 200 300 500
Maximum speed (mm/s)
2. Rod end allowable lateral load

Make sure that the lateral load that is applied to the rod end will be no more than
the values shown in the tables.
The tables show the value for a single rod. For double rods, please contact SMC.
Single Acting, Single Acting,
Standard Double Acting, Single Rod Spring Return (S) Spring Extend (T)
Without auto switch: CU-D (N) Without auto switch: CU-S (N) Without auto switch: CU-T (N)
Stroke (mm) Stroke (mm) Stroke (mm)
Model Model Model
5 10 15 20 25 30 40 50 60 70 80 90 100 5 10 15 5 10 15
CU6 0.085 0.075 0.068 0.061 0.056 0.052 0.045 0.039 0.035 — — — — CU6 0.19 0.17 0.15 CU6 0.067 0.059 0.052
CU10 0.34 0.30 0.27 0.25 0.23 0.21 0.18 0.16 0.15 — — — — CU10 0.66 0.59 0.60 CU10 0.29 0.26 0.24
CU16 0.69 0.61 0.55 0.50 0.46 0.43 0.37 0.33 0.29 — — — — CU16 1.4 1.3 1.3 CU16 0.99 0.89 0.81
CU20 2.2 2.0 1.8 1.6 1.5 1.4 1.2 1.1 1.0 0.92 0.85 0.78 0.73 CU20 4.7 4.2 4.4 CU20 2.2 2.0 1.8
CU25 3.5 3.2 3.0 2.7 2.6 2.4 2.1 1.9 1.7 1.6 1.4 1.3 1.2 CU25 6.8 6.2 6.5 CU25 3.5 3.2 3.0
CU32 5.4 4.9 4.6 4.3 4.0 3.8 3.3 3.0 2.8 2.5 2.3 2.2 2.0 CU32 10 9.8 10 CU32 5.4 4.9 4.6
With auto switch: CDU-D (N) With auto switch: CDU-S (N) With auto switch: CDU-T (N)
Model Model Model
5 10 15 20 25 30 40 50 60 70 80 90 100 5 10 15 5 10 15
CDU6 0.085 0.075 0.068 0.061 0.056 0.052 0.045 0.039 0.035 — — — — CDU6 0.17 0.15 0.13 CDU6 0.062 0.055 0.049
CDU10 0.34 0.30 0.27 0.25 0.23 0.21 0.18 0.16 0.15 — — — — CDU10 0.66 0.59 0.60 CDU10 0.29 0.26 0.24
CDU16 0.99 0.89 0.81 0.74 0.69 0.64 0.56 0.50 0.45 — — — — CDU16 1.6 1.5 1.5 CDU16 0.99 0.89 0.81
CDU20 3.0 2.7 2.5 2.3 2.1 2.0 1.8 1.6 1.4 1.3 1.2 1.1 1.0 CDU20 5.3 4.8 4.9 CDU20 3.0 2.7 2.5
CDU25 4.7 4.3 4.0 3.7 3.5 3.2 2.9 2.6 2.4 2.2 2.0 1.9 1.7 CDU25 7.6 7.0 7.2 CDU25 4.7 4.3 4.0
CDU32 7.1 6.6 6.1 5.7 5.4 5.1 4.6 4.1 3.8 3.5 3.2 3.0 2.8 CDU32 12 11 11 CDU32 7.1 6.6 6.1
Non-rotating Rod Type Non-rotating Rod Type

Non-rotating Rod Type Single Acting, Spring Return (S) Single Acting, Spring Extend (T)
Without auto switch: CUK-D (N) Without auto switch: CUK-S (N) Without auto switch: CUK-T (N)
Model Model Model
5 10 15 20 25 30 40 50 60 70 80 90 100 5 10 15 5 10 15
CUK6 0.075 0.068 0.061 0.056 0.052 0.048 0.042 0.037 0.033 — — — — CUK6 0.17 0.15 0.14 CUK6 0.059 0.052 0.047
CUK10 0.30 0.27 0.25 0.23 0.21 0.20 0.17 0.15 0.14 — — — — CUK10 0.59 0.54 0.56 CUK10 0.26 0.24 0.22
CUK16 0.55 0.50 0.46 0.43 0.40 0.37 0.33 0.29 0.26 — — — — CUK16 1.1 1.0 1.1 CUK16 0.81 0.74 0.69
CUK20 1.8 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.92 0.85 0.78 0.73 0.68 CUK20 3.9 3.6 3.8 CUK20 1.8 1.6 1.5
CUK25 3.0 2.7 2.6 2.4 2.2 2.1 1.9 1.7 1.6 1.4 1.3 1.2 1.2 CUK25 5.7 5.3 5.7 CUK25 3.0 2.7 2.6
CUK32 4.3 4.0 3.8 3.5 3.3 3.2 2.9 2.6 2.4 2.2 2.1 2.0 1.8 CUK32 8.5 7.9 8.6 CUK32 4.3 4.0 3.8
With auto switch: CDUK-D (N) With auto switch: CDUK-S (N) With auto switch: CDUK-T (N)
Model Model Model
5 10 15 20 25 30 40 50 60 70 80 90 100 5 10 15 5 10 15
CDUK6 0.075 0.068 0.061 0.056 0.052 0.048 0.042 0.037 0.033 — — — — CDUK6 0.15 0.13 0.12 CDUK6 0.055 0.049 0.044
CDUK10 0.30 0.27 0.25 0.23 0.21 0.20 0.17 0.15 0.14 — — — — CDUK10 0.59 0.54 0.56 CDUK10 0.26 0.24 0.22
CDUK16 0.81 0.74 0.69 0.64 0.60 0.56 0.50 0.45 0.41 — — — — CDUK16 1.3 1.2 1.3 CDUK16 0.81 0.74 0.69
CDUK20 2.5 2.3 2.1 2.0 1.9 1.8 1.6 1.4 1.3 1.2 1.1 1.0 1.0 CDUK20 4.4 4.1 4.3 CDUK20 2.5 2.3 2.1
CDUK25 4.0 3.7 3.5 3.2 3.1 2.9 2.6 2.4 2.2 2.0 1.9 1.7 1.6 CDUK25 6.5 6.1 6.4 CDUK25 4.0 3.7 3.5
CDUK32 5.7 5.4 5.1 4.8 4.6 4.4 4.0 3.6 3.4 3.1 2.9 2.7 2.6 CDUK32 9.7 9.1 9.6 CDUK32 5.7 5.4 5.1
622
Free Mount Cylinder
Double Acting, Single Rod
CU Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CU 6 30 D
With auto switch CDU 6 30 D M9BW

Made to Order
Built-in magnet ∗ Refer to page 624 for the Made
to Order specifications.
Number of auto switches

Bore size 2 pcs.
Nil
6 6 mm
S 1 pc.
10 10 mm
16 16 mm
20 mm
Auto switch
20
25 mm Nil Without auto switch
25
32 mm ∗ Refer to the table below for
32 applicable auto switches.
Built-in Magnet Cylinder Model

Port thread type Action If a built-in magnet cylinder without an auto
Symbol Type Bore size D Double acting switch is required, there is no need to enter
M5 x 0.8 ø6, ø10, ø16, ø20, ø25 the symbol for the auto switch.
Nil
Rc 1/8 ø32 (Example): CDU20-25D
TN NPT 1/8 ø32
Standard stroke (mm)
TF G 1/8 ø32
ø6, ø10, ø16 5, 10, 15, 20, 25, 30
ø20, ø25, ø32 5, 10, 15, 20, 25, 30, 40, 50
CUJ
CU
Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches.
Load voltage Auto switch model Lead wire length (m)
CQS
Indicator light
Electrical Wiring Pre-wired

Type Special function 0.5 1 3 5 connector Applicable load
entry (Output) DC AC Perpendicular In-line
(Nil) (M) (L) (Z) JCQ
3-wire (NPN) M9NV M9N      IC
5 V, 12 V
— 3-wire (PNP) M9PV M9P      circuit CQ2
2-wire 12 V M9BV M9B      —
auto switch
Solid state
Diagnostic indication
3-wire (NPN)
5 V, 12 V
M9NWV M9NW      IC
Relay, RQ
Grommet Yes 3-wire (PNP) 24 V — M9PWV M9PW      circuit
(2-color indicator) PLC
2-wire 12 V M9BWV M9BW      —
3-wire (NPN) M9NAV∗ M9NA∗    
1 1  IC CQM
Water resistant 5 V, 12 V
3-wire (PNP) ∗
M9PAV M9PA
1 ∗ 1      circuit
(2-color indicator)
2-wire 12 V M9BAV∗1 M9BA∗1      — CQU
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Yes (NPN equivalent) circuit MU
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
No 100 V or less A90V A90  —  — — IC circuit PLC
∗1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance.
Consult with SMC regarding water resistant types with the above model numbers.
∗2 1 m type lead wire is only applicable to D-A93.
∗ Lead wire length symbols: 0.5 m ··················· Nil (Example) M9NW ∗ Solid state auto switches marked with “” are produced upon receipt of order.
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
∗ Since there are applicable auto switches other than the above, refer to page 678 for details. D-
∗ For detail about auto switches with pre-wired connector, refer to pages 1648 and 1649.
∗ Auto switches are shipped together but not assembled.
-X
Technical
Data
623
CU Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
Proof pressure 1.05 MPa
Maximum operating pressure 0.7 MPa
Minimum operating pressure 0.12 MPa 0.06 MPa 0.05 MPa
Without auto switch: –10 to 70°C (No freezing)
Ambient and fluid temperature
With auto switch: –10 to 60°C (No freezing)
Lubrication Non-lube
Piston speed 50 to 500 mm/s
Cushion Rubber bumper
Rod end thread Male thread
Stroke length tolerance +1.0
0 mm
Standard Stroke
Bore size (mm) Standard stroke (mm)
6, 10, 16 5, 10, 15, 20, 25, 30
Symbol
20, 25, 32 5, 10, 15, 20, 25, 30, 40, 50
Double acting, Single rod, Rubber bumper
For "Long Stroke", refer to page 656.
Theoretical Output (N)

Bore size Rod size Operating Piston area Operating pressure (MPa)
(mm) (mm) direction (mm2) 0.3 0.5 0.7
OUT 28.3 8.49 14.2 19.8
6 3
IN 21.2 6.36 10.6 14.8
OUT 78.5 23.6 39.3 55.0
10 4
IN 66.0 19.8 33.0 46.2
Made to Order Specifications OUT 201 60.3 101 141
(For details, refer to pages 1703 to 1896.) 16 6
IN 172 51.6 86.0 121
Symbol Specifications OUT 314 94.2 157 220
20 8
-XB6 Heat resistant (–10 to 150°C) IN 264 79.2 132 185
-XB7 Cold resistant (–40 to 70°C) OUT 491 147 246 344
25 10
-XB9 Low speed (10 to 50 mm/s) IN 412 124 206 288
-XB13 Low speed (5 to 50 mm/s) OUT 804 241 402 563
32 12
-XC19 Intermediate stroke (5 mm spacer) IN 691 207 346 454
-XC22 Fluororubber seals
For clean room specifications, refer to “Pneumatic
Clean Series” catalog (CAT.E02-23). Weight /( ): Denotes the values with D-A93. (g)
Cylinder stroke (mm)
Model
5 10 15 20 25 30 40 50
When mounting the CU series,
Tightening Torque/ C(D)U6-D 22 25 28 31 34 37
refer to the below table. (27) (35) (38) (41) (44) (47) — —
Bore size Hexagon socket head Proper tightening torque
C(D)U10-D 36 40 44 48 52 56 — —
(mm) cap screw dia. (N·m) (41) (50) (54) (58) (62) (66)
6, 10 M3 1.08 ±10%
50 56 62 68 74 80
16 M4 2.45 ±10% C(D)U16-D (75) (86) (92) (98) (104) (110)
— —
20, 25 M5 5.10 ±10% 95 106 117 128 139 150 172 194
32 M6 8.04 ±10% C(D)U20-D (128) (143) (154) (165) (176) (187) (209) (231)
176 193 210 227 244 261 295 329

C(D)U25-D (230) (252) (269) (286) (303) (320) (354) (388)
262 286 310 334 358 382 430 478
C(D)U32-D (335) (364) (388) (412) (436) (460) (508) (556)
Moisture ∗ For the auto switch weight, refer to page 1575.
Control Tube
IDK Series
When operating an actuator with a small diameter
and a short stroke at a high frequency, the dew
condensation (water droplet) may occur inside the
piping depending on the conditions.
Simply connecting the moisture control tube to the
actuator will prevent dew condensation from oc-
curring. For details, refer to the IDK series in the
Best Pneumatics No. 6.
624
Free Mount Cylinder
Double Acting, Single Rod CU Series
Low-speed Cylinder
CU X Mounting bracket Bore size Stroke

Low-speed Cylinder
Smooth operation with a little sticking and slipping at low speed.

Can start smoothly with a little ejection even after being rendered for hours.
Specifications
Bore size (mm) 10 16 20 25 32
Fluid Air
Max. operating pressure 0.7 MPa
Ambient and fluid Without auto switch: –10 to 70°C (No freezing)
temperature With auto switch: –10 to 60°C (No freezing)
Lubricant Not applicable (Non-lube)
ø10, ø16: 1 to 300 mm/s
Piston speed
ø20 to ø32: 0.5 to 300 mm/s
Cushion Rubber bumper on both ends
+1.0
Stroke length tolerance 0
Minimum Operating Pressure

Bore size (mm) 10 16 20 25 32
Minimum Operating Pressure (MPa) 0.06 0.06 0.05 0.05 0.05
CUJ
The dimensions are the same as the double acting, single rod type.
Refer to Best Pneumatics No. 2-3 for details.
CU
CQS
JCQ
CQ2
RQ
CQM
CQU
MU
D-
-X
Technical
Data
625
CU Series
Construction
ø6 With auto switch
ø10
ø16 to ø32
Component Parts Component Parts

No. Description Material Note No. Description Material Note
1 Cylinder tube Aluminum alloy Hard anodized 8 Rod end nut Carbon steel Chromated
Brass ø6 to ø10, Electroless nickel plated 9 Bushing Bearing alloy
2 Head cover
Aluminum alloy ø16 to ø32, Chromated 10 Magnet holder Brass ø6
Brass ø6 11 Magnet —
3 Piston
Aluminum alloy ø10 to ø32, Chromated 12 Auto switch —
4 Piston rod Stainless steel 13 Piston gasket
5 Bumper A Urethane 14∗ Piston seal
NBR
6 Bumper B Urethane 15∗ Rod seal
7 Retaining ring Carbon tool steel Phosphate coated 16∗ Gasket
Replacement Parts: Seal Kit

Bore size
(mm) Kit no. Contents
10 CU10D-PS
16 CU16D-PS
20 CU20D-PS Set of nos. above !4, !5, !6
25 CU25D-PS
32 CU32D-PS
∗ Seal kit includes !4, !5, !6. Order the seal kit, based on each bore size.
∗ Seal kit includes a grease pack (10 g).
Order with the following part number when only the grease pack is needed.
Grease pack part number: GR-S-010 (10 g)
626
Free Mount Cylinder
Dimensions: Double Acting, Single Rod
ø6, ø10
2 x ø P through 2 x M5 x 0.8
Rod end nut
4 x NN
2 x ø P through
4 x ø T counterbore Auto switch
S + Stroke
Z + Stroke
ø16 to ø32
2 x ø P through
2 x M5 x 0.8 (ø32: Rc 1/8)
Rod end nut
Rod End Nut/Accessory
4 x NN
CUJ
CU
Material: Carbon steel
Applicable CQS
Width across Part no. d H1 B1 C1
bore size (mm)
flats L
2 x ø P through NTP-006 6 M3 x 0.5 1.8 5.5 6.4 JCQ
4 x ø T counterbore NTP-010 10 M4 x 0.7 2.4 7 8.1
NTJ-015A 16
S + Stroke Auto switch
NT-015A 20
M5 x 0.8
M6 x 1.0
4
5
8 9.2
10 11.5
CQ2
Z + Stroke
NT-02 25 M8 x 1.25 5 13 15.0
NT-03 32 M10 x 1.25 6 17 19.6 RQ
(mm)
CQM
Bore size
(mm) A A' B C D E GA GB H J K L MM NN P Q QA CQU
6 7 — 13 22 3 7 15 10 13 10 17 — M3 x 0.5 M3 x 0.5 depth 5 3.2 — —
10 10 — 15 24 4 7 16.5 10 16 11 18 — M4 x 0.7 M3 x 0.5 depth 5 3.2 — — MU
16 11 12.5 20 32 6 7 16.5Note) 11.5 16 14 25 5 M5 x 0.8 M4 x 0.7 depth 6 4.5 4 2
20 12 14 26 40 8 9 19 12.5 19 16 30 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 9 4.5
25 15.5 18 32 50 10 10 21.5 13 23 20 38 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 9 4.5
32 19.5 22 40 62 12 11 23 12.5 27 24 48 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 13.5 4.5
Note) 5 stroke (CU16-5D): 14.5 mm
Bore size Without auto switch With auto switch
(mm) R T
S Z S Z
6 7 6 depth 4.8 33 46 33 46
10 9 6 depth 5 36 52 36 52
16 12 7.6 depth 6.5 30 46 40 56 D-
20 16 9.3 depth 8 36 55 46 65
25 20 9.3 depth 9 40 63 50 73 -X
32 24 11 depth 11.5 42 69 52 79
Technical
Data
627
CU Series
Auto Switch Mounting
Proper Auto Switch Mounting Position (Detection at stroke end) and Its Mounting Height
D-A9
D-M9
D-M9W
D-M9A
( ): Denotes the values of D-A96.
D-A9V
D-M9V
D-M9WV
D-M9AV
20 (22)
5.5 (5)
( ): Denotes the values of D-A9V.
(mm)
Bore size D-A9, D-A9V D-M9, D-M9W D-M9V, D-M9WV D-M9A D-M9AV
(mm) A B W A B W A B W A B W A B W
6 13.5 –0.5 2.5 (5) 17.5 3.5 6.5 17.5 3.5 4.5 17.5 3.5 8.5 17.5 3.5 6.5
10 12.5 3.5 –1.5 (1) 16.5 7.5 2.5 16.5 7.5 0.5 16.5 7.5 4.5 16.5 7.5 2.5
16 16 4 –2 (0.5) 20 8 1.5 20 8 –0.5 20 8 3.5 20 8 1.5
20 20 6 –4 (–1.5) 24 10 0 24 10 –2 24 10 2 24 10 0
25 22.5 7 –5.5 (–3) 26.5 11 –1.5 26.5 11 –3.5 26.5 11 0.5 26.5 11 –1.5
32 23.5 8.5 –6.5 (–4) 27.5 12.5 –2.5 27.5 12.5 –4.5 27.5 12.5 –0.5 27.5 12.5 –2.5
Note 1) Figures in the table above are used as a reference when mounting the auto switches for stroke end detection. In the case of actually setting the
auto switches, adjust them after confirming their operation.
Note 2) Negative figures in the table W indicate an auto switch is mounted inward from the edge of the cylinder body.
Note 3) In the case of the 5 stroke or the 10 stroke, there are times in which the auto switch will not turn OFF or 2 auto switches will turn ON simultaneously
due to their movement range. Therefore, set the position approximately 1 to 4 mm outward from the values given in the table above. Then, perform
an operation inspection to make sure that the auto switches operate normally (if 1 switch is used, make sure that it turns ON and OFF properly; if 2
auto switches are used, make sure that both auto switches turn ON).
Note 4) ( ) in column W is the dimensions of D-A90 and A93.
Operating Range
(mm)
Bore size
Auto switch model
6 10 16 20 25 32
D-A9, A9V 5 6 9 11 12.5 14
D-M9, M9V
D-M9W, M9WV 3 4 5.5 7 7 7.5
D-M9A, M9AV
∗ Since the operating range is provided as a guideline including hysteresis,
it cannot be guaranteed (assuming approximately ±30% dispersion).
It may vary substantially depending on an ambient environment.
628
Auto Switch Mounting CU Series
Minimum Stroke for Auto Switch Mounting

(mm)
No. of auto Applicable auto switch

switches D-M9W, D-M9WV
mounted D-A9, D-A9V D-M9, D-M9V
D-M9A, D-M9AV
1 pc. 5 5 5
2 pcs. 10 5 10
Auto Switch Groove Position
4 x ø4.2
4x3
(mm)
Bore size (mm) A B
6 8.2 9
10 10.3 13
16 15 18
20 21 23
25 27 25
32 35 27
Caution on Proximity Installation CUJ

When free mounting cylinders equipped with auto switches are
used, the auto switches could activate unintentionally if the Bore size (mm) Mounting pitch L (mm) CU
installed distance is less than the dimensions shown in the table. 6 18
Therefore, make sure to provide a greater clearance. Due to
unavoidable circumstances, if they must be used with less
10 20 CQS
distance than the dimensions given in the table, the cylinders must 16 33
be shielded. Therefore, affix a steel plate or a magnetic shield 20 40 JCQ
plate (MU-S025) to the area on the cylinder that corresponds to 25 46
the adjacent auto switch. (Please contact SMC for details.) Auto 32 56 CQ2
switches may malfunction if a shield plate is not used.
L
RQ
Dimensions of shield plate (MU-S025) that is sold separately are
indicated as reference.
CQM
CQU
18
36
Material: Ferrite stainless steel, Thickness: 0.3 mm
MU
The product can be attached to the cylinder since the
bottom side is a seal type.
D-
-X
Technical
Data
629
Free Mount Cylinder
Double Acting, Double Rod
CUW Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CUW 6 30 D
With auto switch CDUW 6 30 D M9BW

Nil 2 pcs.
Built-in magnet S 1 pc.
Auto switch
Double rod
Nil Without auto switch
∗ Refer to the table below for applicable
auto switches.
Bore size
6 6 mm
10 10 mm Action
16 16 mm
If a built-in magnet cylinder without an auto
D Double acting switch is required, there is no need to enter
20 20 mm
25 25 mm the symbol for the auto switch.
32 32 mm (Example): CDUW20-30D
Port thread type

Symbol Type Bore size Standard stroke (mm)
M5 x 0.8 ø6, ø10, ø16, ø20, ø25 ø6, ø10, ø16 5, 10, 15, 20, 25, 30, 40, 50, 60
Nil ø20, ø25, ø32 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100
Rc 1/8 ø32
TN NPT 1/8 ø32
TF G 1/8 ø32
Indicator light
Type Special function Electrical Wiring Pre-wired

entry (Output) 0.5 1 3 5 connector Applicable load
DC AC Perpendicular In-line
(Nil) (M) (L) (Z)
5 V, 12 V
— 3-wire (PNP) M9PV M9P      circuit
2-wire 12 V M9BV M9B      —
auto switch
Solid state
3-wire (NPN) M9NWV M9NW      IC

Diagnostic indication 5 V, 12 V Relay,
2-wire 12 V M9BWV M9BW      —
3-wire (NPN) M9NAV∗1 M9NA∗1      IC
3-wire (PNP) M9PAV∗1 M9PA∗1      circuit
(2-color indicator)
2-wire 12 V M9BAV∗1 M9BA∗1      —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Yes (NPN equivalent) circuit
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
∗ Since there are applicable auto switches other than the above, refer to page 678 for details.
630
Free Mount Cylinder
Double Acting, Double Rod CUW Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
+ 1.0
Stroke length tolerance 0 mm
Standard Stroke
6, 10, 16 5, 10, 15, 20, 25, 30, 40, 50, 60
20, 25, 32 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100
Theoretical Output (N)

Bore size Rod size Piston area Operating pressure (MPa)
Symbol (mm) (mm) (mm2) 0.3 0.5 0.7
Double acting, Single rod, Rubber bumper 6 3 21.2 6.36 10.6 14.8
10 4 66.0 19.8 33.0 46.2
16 6 172 51.6 86.0 121
20 8 264 79.2 132 185
25 10 412 124 206 288
32 12 691 207 346 484
Weight /( ): Denotes the values with D-A93. (g)

Stroke (mm)
Model
5 10 15 20 25 30 40 50 60 70 80 90 100
C(D)UW6-D 27
(32)
30
(40)
34
(44)
37
(47)
40
(50)
44
(54)
51
(61)
58
(68)
65
(75)
— — — — CUJ
C(D)UW10-D 44
(49)
49
(59)
53
(63)
58
(68)
62
(72)
67
(77)
76
(86)
85
(95)
94
(104)
— — — — CU
C(D)UW16-D
74
(99)
81
(111)
88
(118)
95
(125)
102
(132)
109
(139)
123
(153)
137
(167)
151
(181)
— — — — CQS
C(D)UW20-D
132
(165)
145
(182)
158
(195)
171
(208)
184
(221)
197
(234)
223
(260)
250
(287)
275
(312)
301
(338)
327
(364)
353
(390)
379
(416)
JCQ
C(D)UW25-D
240
(294)
260
(319)
280
(339)
300
(359)
321
(380)
341
(400)
381
(440)
421
(480)
461
(520)
501
(560)
541
(600)
581
(640)
621
(680)
CQ2
C(D)UW32-D
365
(438)
394
(472)
422
(500)
451
(529)
479
(557)
508
(586)
586
(664)
622
(700)
679
(757)
736
(814)
793
(871)
850
(928)
907
(985) RQ
∗ For the auto switch weight, refer to page 1575.
CQM
Tightening Torque
CQU
When mounting the CUW series, refer to MU
page 624.
Moisture
Control Tube
IDK Series
D-
actuator will prevent dew condensation from oc- -X
Best Pneumatics No. 6. Technical
Data
631
CUW Series
Construction
ø10
ø16 to ø32

1 Cylinder tube Aluminum alloy Hard anodized 9 Bumper Urethane
2 Rod cover Aluminum alloy Chromated 10 Rod end nut Carbon steel Chromated
3 Rod cover retainer Aluminum alloy Hard anodized 11 Hexagon socket head cap screw Carbon steel Chromated
4 Piston Brass ø6 12 Magnet —
Brass ø6 13 Auto switch —
5 Piston
Aluminum alloy ø10 to ø32, Chromated 14 Piston gasket
6 Piston rod Stainless steel 15∗ Piston seal
NBR
7 Piston rod Stainless steel ø6 16∗ Rod seal
8 Bushing Bearing alloy 17∗ Gasket

Bore size (mm) / Part no.
10 16 20 25 32
Kit no. CUW10D-PS CUW16D-PS CUW20D-PS CUW25D-PS CUW32D-PS
632
Free Mount Cylinder
Double Acting, Double Rod CUW Series
Dimensions: Double Acting, Double Rod
ø6, ø10
2 x øP through 2 x M5 x 0.8
Rod end nut
2 x NN
Auto switch
2 x øP through
4 x øT counterbore
S + Stroke W + Stroke
Z + 2 x Stroke
ø16 to ø32
2 x øP through 2 x M5 x 0.8 (ø32: Rc 1/8)
Rod end nut
2 x NN
Auto switch CUJ
CU
Material: Carbon steel CQS
Width across
flats L Applicable bore d H1 B1 C1
Part no.
size (mm) JCQ
2 x øP through Width across NTP-006 6 M3 x 0.5 1.8 5.5 6.4
flats L
4 x øT counterbore
NTP-010 10 M4 x 0.7 2.4 7 8.1 CQ2
NTJ-015A 16 M5 x 0.8 4 8 9.2
Z + 2 x Stroke NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0
RQ
NT-03 32 M10 x 1.25 6 17 19.6
CQM
Bore size
A A' B C D E GA GB H J K L MM NN P Q QA CQU
(mm)
6
10
7
10
—
—
13
15
22
24
3
4
7
7
15
16.5
16
16
13
16
10
11
17
18
—
—
M3 x 0.5
M4 x 0.7
M3 x 0.5 depth 5 3.2
M3 x 0.5 depth 5 3.2
—
—
—
—
MU
16 11 12.5 20 32 6 7 16.5 Note)
19 16 14 25 5 M5 x 0.8 M4 x 0.7 depth 6 4.5 4 2
20 12 14 26 40 8 9 19 21.5 19 16 30 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 9 4.5
25 15.5 18 32 50 10 10 21.5 22 23 20 38 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 9 4.5
32 19.5 22 40 62 12 11 23 22.5 27 24 48 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 13.5 4.5
Note 1) 5 stroke (CUW16-5D): GA = 14.5
R SA T W Note 2) The two chamfered positions for the double rod type are not identical.
(mm) S Z S Z
6 7 6 6 depth 4.8 13 38 70 38 70
10 9 6 6 depth 5 16 36 74 36 74 D-
16 12 7.5 7.6 depth 6.5 16 30 69.5 40 79.5
20 16 9 9.3 depth 8 19 36 83 46 93 -X
25 20 9 9.3 depth 9 23 40 95 50 105
32 24 10 11 depth 11.5 27 42 106 52 116 Technical
Data
633
CUW Series
Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height
D-A9
D-M9
D-M9W
D-M9A
D-A9V
D-M9V
D-M9WV
D-M9AV
20 (22)
5.5 (5)

(mm)
6 13.5 5.5 –3.5 (–1) 17.5 9.5 0.5 17.5 9.5 –1.5 17.5 9.5 2.5 17.5 9.5 0.5
10 12.5 9.5 –7.5 (–5) 16.5 13.5 –3.5 16.5 13.5 –5.5 16.5 13.5 –1.5 16.5 13.5 –3.5
16 16 11.5 –9.5 (–7) 20 15.5 –5.5 20 15.5 –7.5 20 15.5 –3.5 20 15.5 –5.5
20 20 15 –13 (–10.5) 24 19 –9 24 19 –11 24 19 –7 24 19 –9
25 22.5 16 –14.5 (–12) 26.5 20 –10.5 26.5 20 –12.5 26.5 20 –8.5 26.5 20 –10.5
32 23.5 18.5 –16.5 (–14) 27.5 22.5 –12.5 27.5 22.5 –14.5 27.5 22.5 –10.5 27.5 22.5 –12.5
auto switches, adjust them after confirming their operation.
Note 3) In the case of the 5 stroke or the 10 stroke, there are times in which the auto switch will not turn OFF or 2 auto switches will turn ON simultaneously
due to their movement range. Therefore, set the position approximately 1 to 4 mm outward from the values given in the table above. Then, perform
an operation inspection to make sure that the auto switches operate normally (if 1 switch is used, make sure that it turns ON and OFF properly; if 2
auto switches are used, make sure that both auto switches turn ON).
Note 4) ( ) in column W is the dimensions of D-A90 and A93.
Operating Range Minimum Stroke for Auto Switch Mounting

(mm) (mm)
Bore size (mm) Applicable auto switch
Auto switch model No. of auto
6 10 16 20 25 32 switches D-M9W, D-M9WV
D-A9, A9V 5 6 9 11 12.5 14 mounted D-A9, D-A9V D-M9, D-M9V D-M9A, D-M9AV
D-M9, M9V 1 pc. 5 5 5
D-M9W, M9WV 3 4 5.5 7 7 7.5 2 pcs. 10 5 10
D-M9A, M9AV
∗ Since the operating range is provided as a guideline including hysteresis,
it cannot be guaranteed (assuming approximately ±30% dispersion).
It may vary substantially depending on an ambient environment.
634
Free Mount Cylinder
Single Acting, Single Rod, Spring Return/Extend
CU Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CU 10 15 S
With auto switch CDU 10 15 S M9BW

Made to Order
∗ Refer to page 636 for the Made
Built-in magnet to Order specifications.

Nil 2 pcs.
Bore size
S 1 pc.
6 6 mm
10 10 mm Auto switch
16 16 mm
20 20 mm
∗ Refer to the table below for applicable auto switches.
25 25 mm
32 32 mm
Action Built-in Magnet Cylinder Model
Port thread type S Single acting, Spring return
If a built-in magnet cylinder without an auto
Symbol Type Bore size T Single acting, Spring extend
switch is required, there is no need to enter
Nil
Rc 1/8 ø32 Standard stroke (mm) (Example): CDU20-10S
TN NPT 1/8 ø32 ø6, ø10, ø16
5, 10, 15
TF G 1/8 ø32 ø20, ø25, ø32
CUJ
Load voltage Auto switch model Lead wire length (m) CU
Indicator light
Electrical Wiring Pre-wired

Type Special function 0.5 1 3 5 connector Applicable load
entry (Output) DC AC Perpendicular In-line
(Nil) (M) (L) (Z)
CQS
5 V, 12 V
2-wire 12 V M9BV M9B      — JCQ
auto switch
Solid state

Diagnostic indication
(2-color indicator)
Grommet Yes 3-wire (PNP) 24 V
5 V, 12 V
— M9PWV M9PW      circuit
Relay,
PLC
CQ2
2-wire 12 V M9BWV M9BW      —
Water resistant
3-wire (NPN)
5 V, 12 V
M9NAV∗ M9NA∗    
1 1  IC RQ
3-wire (PNP) ∗
M9PAV M9PA
1 ∗ 1      circuit
(2-color indicator)
2-wire M9BAV∗1 M9BA∗1    
3-wire
12 V  —
IC
CQM
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay, CQU
2-wire 24 V 12 V
∗1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. MU
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
D-
-X
Technical
Data
635
CU Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
+ 1.0
Note) ø6 with auto switch type: One side rubber bumper
Symbol
Single acting, Single acting, Standard Stroke
Spring return Spring extend Bore size (mm) Standard stroke (mm)
6, 10, 16, 20, 25, 32 5, 10, 15
Rubber bumper Theoretical Output (N)

Bore size Operating pressure (MPa)
Action
(mm) 0.3 0.5 0.7
ø6 4.99 10.7 16.3
ø10 16.7 32.4 48.1
ø16 45.6 86.3 126
Spring return (S)
ø20 73 136 199
ø25 119 218 316
ø32 207 368 529
ø6 2.86 7.10 11.3
Made to Order Specifications ø10 12.9 26.1 39.3
(For details, refer to pages 1703 to 1896.) ø16 37.2 71.8 106
Spring extend (T)
Symbol Specifications ø20 58 111 164
-XC22 Fluororubber seals ø25 95 178 260
ø32 173 312 450
For the reactive force of spring return, refer to page 1899.

Stroke (mm)
Model
5 10 15
C(D)U6-S,T 22 (27) 25 (35) 28 (38)
C(D)U10-S,T 36 (41) 40 (50) 48 (58)
C(D)U16-S,T 50 (75) 56 (86) 71 (101)
C(D)U20-S,T 95 (128) 106 (143) 133 (170)
C(D)U25-S,T 176 (230) 193 (252) 235 (294)
C(D)U32-S,T 262 (335) 286 (364) 347 (425)
∗ For the weight of auto switch, refer to page 1575.
Tightening Torque
Moisture
When mounting a CU single acting series,
Control Tube
refer to page 624.
IDK Series
actuator will prevent dew condensation from oc-
Best Pneumatics No. 6.
636
Free Mount Cylinder
Single Acting, Single Rod, Spring Return/Extend CU Series
Construction
Single acting, Spring return With auto switch
ø6
ø10
ø16 to ø32

1 Cylinder tube Aluminum alloy Hard anodized 9 Spring seat Brass CUJ
Brass ø6 to ø10, Electroless nickel plated 10 Spring seat Brass
2 Head cover
Aluminum alloy ø16 to ø32, Chromated 11 Retaining ring Carbon tool steel Phosphate coated CU
Brass ø6 12 Rod end nut Carbon steel Chromated
3 Piston
4 Piston
Aluminum alloy
Aluminum alloy
ø10 to ø32, Chromated
ø10
13
14
Bushing
Magnet holder
Bearing alloy
Brass ø6
CQS
5 Piston rod Stainless steel 15 Magnet —
6 Bumper A Urethane 16 Auto switch — JCQ
7 Bumper B Urethane 17 Piston gasket
8 Return spring Piano wire Zinc chromated 18∗ Piston seal NBR CQ2
19∗ Gasket
RQ
10 16 20 25 32
Kit no. CU10S-PS CU16S-PS CU20S-PS CU25S-PS CU32S-PS CQM
∗ Seal kit includes !8, !9. Order the seal kit, based on each bore size.
∗ Seal kit includes a grease pack (10 g). CQU
MU
D-
-X
Technical
Data
637
CU Series
Construction
Single acting, Spring extend With auto switch
ø6
ø10
ø16 to ø32

1 Cylinder tube Aluminum alloy Hard anodized 9 Spring seat Brass
Brass ø6 to ø10, Electroless nickel plated 10 Stopper Brass ø6
2 Head cover
Aluminum alloy ø16 to ø32, Chromated 11 Retaining ring Carbon tool steel Phosphate coated
Brass ø6 12 Rod end nut Carbon steel Chromated
3 Piston
Aluminum alloy ø10 to ø32, Chromated 13 Bushing Bearing alloy
4 Piston Aluminum alloy ø10, Chromated 14 Plug with fixed orifice Alloy steel Black dyed
5 Piston rod Stainless steel 15 Magnet —
6 Bumper A Urethane 16 Auto switch —
7 Bumper B Urethane 17 Piston gasket
8 Return spring Piano wire Zinc chromated 18∗ Piston seal NBR
19∗ Rod seal

10 16 20 25 32
Kit no. CU10T-PS CU16T-PS CU20T-PS CU25T-PS CU32T-PS
∗ Seal kit includes !8, !9. Order the seal kit, based on each bore size.
638
Free Mount Cylinder
Single Acting, Single Rod, Spring Return/Extend CU Series
Dimensions: Single Acting, Spring Return
ø6, ø10
2 x øP through Bleed port M5 x 0.8
Rod end nut
4 x NN
2 x øP through Auto switch

4 x øT counterbore
ø16 to ø32
2 x øP through Bleed port
Rod end nut M5 x 0.8 (ø32: Rc 1/8)
4 x NN
CUJ
CU
Width across
flats L Material: Carbon steel CQS
2 x øP through Applicable bore
Part no. d H1 B1 C1
4 x øT counterbore
NTP-006
size (mm)
6 M3 x 0.5 1.8 5.5 6.4
JCQ
Auto switch
NTP-010 10 M4 x 0.7 2.4 7 8.1
NTJ-015A 16 M5 x 0.8 4 8 9.2 CQ2
NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0 RQ
NT-03 32 M10 x 1.25 6 17 19.6
CQM
(mm)
Bore size
A A' B C D E GA GB H J K L MM NN P Q QA R T CQU
(mm)
6
10
7
10
—
—
13
15
22
24
3
4
7
7
15
16.5
10
10
13
16
10
11
17
18
—
—
M3 x 0.5
M4 x 0.7
M3 x 0.5 depth 5
M3 x 0.5 depth 5
3.2
3.2
—
—
—
—
7
9
6 depth 4.8
6 depth 5
MU
16 11 12.5 20 32 6 7 16.5 11.5 16 14 25 5 M5 x 0.8 M4 x 0.7 depth 6 4.5 4 2 12 7.6 depth 6.5
20 12 14 26 40 8 9 19 12.5 19 16 30 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 9 4.5 16 9.3 depth 8
25 15.5 18 32 50 10 10 21.5 13 23 20 38 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 9 4.5 20 9.3 depth 9
32 19.5 22 40 62 12 11 23 12.5 27 24 48 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 13.5 4.5 24 11 depth 11.5
Without auto switch With auto switch
Bore size S Z S Z
(mm)
5 st 10 st 15 st 5 st 10 st 15 st 5 st 10 st 15 st 5 st 10 st 15 st
6 38 43 48 51 56 61 38 43 48 51 56 61 D-
10 41 46 56 57 62 72 41 46 56 57 62 72
16
20
35
41
40
46
50
56
51
60
56
65
66
75
45
51
50
56
60
66
61
70
66
75
76
85
-X
25 45 50 60 68 73 83 55 60 70 78 83 93 Technical
32 47 52 62 74 79 89 57 62 72 84 89 99 Data
639
CU Series
Dimensions: Single Acting, Spring Extend
ø6, ø10
2 x øP through M5 x 0.8
Rod end nut Plug with fixed orifice
4 x NN

4 x øT counterbore
H + Stroke
ø16 to ø32
M5 x 0.8 (ø32: Rc 1/8)
Rod end nut 2 x øP through Plug with fixed orifice
4 x NN

Applicable bore
Part no. d H1 B1 C1
size (mm)
Width across flats L NTP-006 6 M3 x 0.5 1.8 5.5 6.4
2 x øP through
4 x øT counterbore NTP-010 10 M4 x 0.7 2.4 7 8.1
H + Stroke Auto switch NTJ-015A 16 M5 x 0.8 4 8 9.2
NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0
NT-03 32 M10 x 1.25 6 17 19.6
(mm)
Bore size
A A' B C D E GA GB H J K L MM NN P Q QA R T V
(mm)
6 7 — 13 22 3 7 15 10 13 10 17 — M3 x 0.5 M3 x 0.5 depth 5 3.2 — — 7 6 depth 4.8 —
10 10 — 15 24 4 7 16.5 10 16 11 18 — M4 x 0.7 M3 x 0.5 depth 5 3.2 — — 9 6 depth 5 —
16 11 12.5 20 32 6 7 16.5 11.5 16 14 25 5 M5 x 0.8 M4 x 0.7 depth 6 4.5 4 2 12 7.6 depth 6.5 3.5
20 12 14 26 40 8 9 19 12.5 19 16 30 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 9 4.5 16 9.3 depth 8 5
25 15.5 18 32 50 10 10 21.5 13 23 20 38 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 9 4.5 20 9.3 depth 9 5
32 19.5 22 40 62 12 11 23 12.5 27 24 48 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 13.5 4.5 24 11 depth 11.5 5
Bore size S Z S Z
(mm)
6 38 43 48 56 66 76 38 43 48 56 66 76
10 41 46 56 62 72 87 41 46 56 62 72 87
16 45 50 60 66 76 91 45 50 60 66 76 91
20 41 46 56 65 75 90 51 56 66 75 85 100
25 45 50 60 73 83 98 55 60 70 83 93 108
32 47 52 62 79 89 104 57 62 72 89 99 114
640
CU Series
Minimum Stroke for Auto Switch Mounting
(mm)
Applicable auto switch
No. of auto
switches mounted D-M9W, D-M9WV
D-A9, D-A9V D-M9, D-M9V
D-M9A, D-M9AV
1 pc. 5 5 5
2 pcs. 10 5 10
Proper Auto Switch Mounting Position (Detection at Stroke End) and Mounting Height: Single Acting, Spring Return
D-A9
D-M9
D-M9W
D-M9A

D-A9V
D-M9V
D-M9WV 20 (22)
D-M9AV
5.5 (5)
Single Acting, Spring Return (mm)
CUJ
(mm)
Stroke
A B W A B W A B W A B W A B W
CU
6 All stroke 13.5 0 2.5 (5) 17.5 4 6.5 17.5 4 4.5 17.5 4 8.5 17.5 4 6.5
CQS
5, 10 12.5 16.5 16.5 16.5 16.5
10 15 17.5
3.5 –1.5 (1)
21.5
7.5 2.5
21.5
7.5 0.5
21.5
7.5 4.5
21.5
7.5 2.5
16
5, 10 16
4 –2 (0.5)
20
8 2
20
8 –0.5
20
8 4
20
8 1.5 JCQ
15 21 25 25 25 25
5, 10 20 24 24 24 24
20 15 25
6 –4 (–1.5)
29
10 0
29
10 –2
29
10 2
29
10 0
CQ2
5, 10 22.5 –5.5 (–3) 26.5 –1.5 26.5 26.5 26.5
25 15 27.5
7
31.5
11
31.5
11 –3.5
31.5
11 0.5
31.5
11 –1.5
32
5, 10 23.5
8.5 –6.5 (–4)
27.5
12.5 –2.5
27.5
12.5 –4.5 27.5
12.5 –0.5 27.5
12.5 –2.5
RQ
15 28.5 32.5 32.5 32.5 32.5
Single Acting, Spring Extend (mm) CQM

(mm)
Stroke
A B W A B W A B W A B W A B W CQU
6 All stroke 10.5 1.5 0.5 (3) 14.5 5.5 4.5 14.5 5.5 2.5 14.5 5.5 6.5 14.5 5.5 4.5
5, 10 3.5 -1.5 (1) 7.5 2.5 7.5 0.5 7.5 4.5 7.5 2.5
MU
10 15
12.5
8.5 -6.5 (-4)
16.5
12.5 -2.5 16.5 12.5 -4.5
16.5
12.5 -0.5 16.5 12.5 -2.5
5, 10 4 -2 (0.5) 8 2 8 0 8 4 8 2
16 15
16
9 -7 (-4.5)
20
13 -3 20 13 -5
20
13 -1 20 13 -3
5, 10 6 -4 (-1.5) 10 0 10 -2 10 2 10 0
20 15
20
11 -9 (-6.5)
24
15 -5 24 15 -7
24
15 -3 24 15 -5
5, 10 7 -5.5 (-3) 11 -1.5 11 -3.5 11 0.5 11 -1.5
25 15
22.5
12 -10.5 (-8)
26.5
16 -6.5 26.5 16 -8.5
26.5
16 -4.5 26.5 16 -6.5
5, 10 8.5 -6.5 (-4) 12.5 -2.5 12.5 -4.5 12.5 -0.5 12.5 -2.5
32 15
23.5
13.5 -11.5 (-9)
27.5
17.5 -7.5 27.5 17.5 -9.5
27.5
17.5 -5.5 27.5 17.5 -7.5
Note 1) Figures in the table above are used as a reference when mounting the auto switches for stroke end detection. In the case of actually setting the auto switches,
adjust them after confirming their operation. D-
Note 3) In the case of the 5 stroke or the 10 stroke, there are times in which the auto switch will not turn OFF or 2 auto switches will turn ON simultaneously due to
their movement range. Therefore, set the position approximately 1 to 4 mm outward from the values given in the table above. Then, perform an operation -X
inspection to make sure that the auto switches operate normally (if 1 switch is used, make sure that it turns ON and OFF properly; if 2 auto switches are used,
make sure that both auto switches turn ON). Technical
Note 4) ( ) in column W is the dimensions of D-A90 and A93. Data
641
Free Mount Cylinder: Non-rotating Rod Type
CUK Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CUK 6 30 D
With auto switch CDUK 6 30 D M9BW

Made to Order

Non-rotating rod type Nil 2 pcs.
S 1 pc.
Bore size Auto switch

6 6 mm Nil Without auto switch
10 10 mm ∗ Refer to the table below for applicable auto switches.
16 16 mm
20 20 mm Built-in Magnet Cylinder Model
25 25 mm Action If a built-in magnet cylinder without an auto
32 32 mm
the symbol for the auto switch.
Port thread type (Example): CDUK20-25D
Symbol Type Bore size
Standard stroke (mm)
M5 x 0.8 ø6, ø10, ø16, ø20, ø25
Nil ø6, ø10, ø16 5, 10, 15, 20, 25, 30
Rc 1/8 ø32
ø20, ø25, ø32 5, 10, 15, 20, 25, 30, 40, 50
TN NPT 1/8 ø32
TF G 1/8 ø32
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
(2-color indicator)
2-wire 12 V M9BAV∗ M9BA∗    
1 1  —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
Consult with SMCregarding water resistant types with the above model numbers.
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
642
Double Acting, Single Rod CUK Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
Symbol Piston speed 50 to 500 mm/s
Double acting, Single rod, Rubber bumper Cushion Rubber bumper
+ 1.0
Rod non-rotating accuracy Note) ±0.8° ±0.5°
Note) No load: Rod at retracted
Standard Stroke Minimum Stroke for Auto Switch Mounting (mm)
Bore size (mm) Standard stroke (mm) Applicable auto switch

No. of auto
6, 10, 16 5, 10, 15, 20, 25, 30 switches mounted D-A9, D-A9V D-M9, D-M9V D-M9W, D-M9WV
20, 25, 32 5, 10, 15, 20, 25, 30, 40, 50
Note) For long stroke, refer to page 660. 1 pc. 5 5 5
2 pcs. 10 5 10

Stroke (mm)
Bore size (mm)
5 10 15 20 25 30 40 50
Made to Order Specifications
28 31 34 37 40 43
(For details, refer to pages 1703 to 1896.) C(D)UK6-D (33) (41) (44) (47) (50) (53) — —
Symbol Specifications 43 47 51 55 59 63
C(D)UK10-D (48) (57) (61) (65) (69) (73) — —
-XB6 Heat resistant (–10 to 150°C)
-XB7 Cold resistant (– 40 to 70°C) 60 66 72 78 84 90
C(D)UK16-D (85) (96) (102) (108) (114) (120) — —
-XB9 Low speed (10 to 50 mm/s)
113 124 136 148 160 172 195 219
-XB13 Low speed (5 to 50 mm/s) C(D)UK20-D (147) (164) (176) (188) (200) (211) (235) (260)
-XC19 Intermediate stroke (5 mm spacer) 212 229 246 263 280 297 335 370
-XC22 Fluororubber seals C(D)UK25-D (266) (288) (305) (322) (339) (356) (390) (424)
-XC34
Non-rotating plate with workpiece mounting
screw (No extended part on the rod end) C(D)UK32-D
331
(404)
357
(435)
383
(461)
409
(487)
435
(513)
461
(539)
513
(591)
565
(643) CUJ
CU
Allowable Rotational Torque
Bore size (mm) 6 10 16 20 25 32 CQS
Allowable rotational torque
0.0015 0.02 0.04 0.10 0.15 0.20
(N·m)
JCQ
Tightening Torque
When mounting the CUK series, refer
Precautions CQ2
to page 624. Be sure to read this before handling the RQ
products. Refer to back page 50 for
Theoretical Output Safety Instructions and pages 3 to 12 for CQM
Specifications are the same as CU
Actuator and Auto Switch Precautions.
series double acting, single rod. Refer
Operating Precautions CQU
to page 624.
Caution MU
Auto Switch Mounting Position 1. Do not place your fingers in the clearance
For the auto switch mounting between the non-rotating plate and the
cylinder tube.
Moisture position of the CDUK series, refer to Your fingers could get caught between the
Control Tube page 628, since specifications are non-rotating plate and the cylinder tube when
IDK Series the same as standard type, double the piston rod retracts. Therefore, never place
acting, single rod type. your finger in this area.
When operating an actuator with a small diameter Because the cylinder outputs a great force, it
and a short stroke at a high frequency, the dew could lead to injury if precautions are not
taken to prevent your fingers from getting
piping depending on the conditions. caught. D-
2. When using the non-rotating type, make sure
Simply connecting the moisture control tube to the that rotational torque is not applied to the
actuator will prevent dew condensation from oc- piston rod. If rotational torque must be applied -X
curring. For details, refer to the IDK series in the due to unavoidable circumstances, make sure
Best Pneumatics No. 6. to use it at the allowable rotational torque or Technical
less, which is shown in the table on the right. Data
643
CUK Series
Construction
Section AA
ø10
Section AA
ø16 to ø32
Section AA

1 Cylinder tube Aluminum alloy Hard anodized 11 Magnet —
Brass ø6 to ø10, Electroless nickel plated 12 Auto switch —
2 Head cover
Aluminum alloy ø16 to ø32, Chromated 13 Non-rotating plate Aluminum alloy Nickel plated
Brass ø6 14 Guide rod Stainless steel
3 Piston
4 Piston rod Stainless steel Hexagon socket
16 head cap screw Carbon steel Chromated
5 Bumper A Urethane
6 Bumper B Urethane Hexagon socket
17 Carbon steel Chromated
7 Retaining ring Carbon tool steel Phosphate coated head set screw
8 Rod end nut Carbon steel Chromated 18 Piston gasket
Oil-impregnated 19∗ Piston seal
9 Bushing NBR
sintered alloy 20∗ Rod seal
10 Magnet holder Brass ø6 21∗ Gasket
Bore size Kit no. Contents
(mm)
10 CU10D-PS
16 CU16D-PS ∗ Seal kit includes !9, @0, @1. Order the seal kit, based on each bore size.
20 CU20D-PS Set of nos. above !9, @0, @1.
25 CU25D-PS Order with the following part number when only the grease pack is needed.
32 CU32D-PS Grease pack part number: GR-S-010 (10 g)
644
Double Acting, Single Rod CUK Series
Dimensions: Non-rotating Rod Type; Double Acting, Single Rod
ø6, ø10 Rod end nut
2 x NN
2 x øP through
4 x øT counterbore
Auto switch
S + Stroke
Z + Stroke
ø16 to ø32
Rod end nut
2 x NN
Width across
flats L
2 x øP through CUJ
4 x øT counterbore
Auto switch
S + Stroke CU
Z + Stroke
Rod End Nut/Accessory Material: Carbon steel CQS

Applicable bore
Part no.
size (mm)
d H1 B1 C1
JCQ
NTP-006 6 M3 x 0.5 1.8 5.5 6.4
NTP-010 10 M4 x 0.7 2.4 7 8.1 CQ2
NTJ-015A 16 M5 x 0.8 4 8 9.2
NT-015A
NT-02
20
25
M6 x 1.0
M8 x 1.25
5 10
5 13
11.5
15.0
RQ
NT-03 32 M10 x 1.25 6 17 19.6
CQM
(mm)
Bore size
A A' B C D E F FL FK FY GA GB H J K L MM CQU
(mm)
6
10
7
10
—
—
13
15
22
24
3
4
7
7
8
8
9
12
11
12
20.5
22
15
16.5
10
10
18
21
10
11
17
18
—
—
M3 x 0.5
M4 x 0.7
MU
16 11 12.5 20 32 6 7 8 17 13 28 16.5 Note) 11.5 26 14 25 5 M5 x 0.8
20 12 14 26 40 8 9 8 20 16 33 19 12.5 29 16 30 6 M6 x 1.0
25 15.5 18 32 50 10 10 10 22 20 43.5 21.5 13 33 20 38 8 M8 x 1.25
32 19.5 22 40 62 12 11 12 29 24 51.5 23 12.5 42 24 48 10 M10 x 1.25

NN P Q QA R T Y
(mm) S Z S Z
6 M3 x 0.5 depth 5 3.2 — — 7 6 depth 4.8 10.5 33 51 33 51
10 M3 x 0.5 depth 5 3.2 — — 9 6 depth 5 11.5 36 57 36 57 D-
16 M4 x 0.7 depth 6 4.5 4 2 12 7.6 depth 6.5 15.5 30 56 40 66
20 M5 x 0.8 depth 8 5.5 9 4.5 16 9.3 depth 8 19.5 36 65 46 75
-X
25 M5 x 0.8 depth 8 5.5 9 4.5 20 9.3 depth 9 24.5 40 73 50 83
32 M6 x 1.0 depth 9 6.6 13.5 4.5 24 11 depth 11.5 30.5 42 84 52 94 Technical
Note) 5 stroke (CUK16-5D): GA = 14.5 Data
645
Double Acting, Double Rod
CUKW Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CUKW 6 30 D
With auto switch CDUKW 6 30 D M9BW

Built-in magnet Nil 2 pcs.
S 1 pc.
Non-rotating rod type
Double rod Auto switch
Bore size ∗ Refer to the table below for applicable
6 6 mm auto switches.
10 10 mm
16 16 mm Action
20 20 mm
Double acting If a built-in magnet cylinder without an auto
D
25 25 mm switch is required, there is no need to enter
32 32 mm the symbol for the auto switch.
(Example): CDUKW20-25D
Port thread type
Symbol Type Bore size Standard stroke (mm)
M5 x 0.8 ø6, ø10, ø16, ø20, ø25 ø6, ø10, ø16 5, 10, 15, 20, 25, 30, 40, 50, 60
Nil
Rc 1/8 ø32 ø20, ø25, ø32 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100
TN NPT 1/8 ø32
TF G 1/8 ø32
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
1 1  IC
3-wire (PNP) ∗
M9PAV M9PA
1 ∗ 1      circuit
(2-color indicator)
2-wire 12 V M9BAV∗1 M9BA∗1      —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
646
Double Acting, Double Rod CUKW Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
+ 1.0
Note) No load: Rod in the non-rotating plate side at retracted
Symbol Standard Stroke

Non-rotating rod, Rubber bumper Bore size (mm) Standard stroke (mm)
6, 10, 16 5, 10, 15, 20, 25, 30, 40, 50, 60
20, 25, 32 5, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100
Minimum Stroke for Auto Switch Mounting (mm)

No. of auto
switches mounted D-A9, D-A9V D-M9, D-M9V D-M9W, D-M9WV
1 pc. 5 5 5
2 pcs. 10 5 10
Model
Stroke (mm) CUJ
5 10 15 20 25 30 40 50 60 70 80 90 100
C(D)UKW6-D 33 36 40 43 46 50 57 64 71
— — — — CU
(38) (46) (50) (53) (56) (60) (67) (74) (81)
C(D)UKW10-D 51 56 60 65 69 74 83 92 101
— — — — CQS
(56) (66) (70) (75) (79) (84) (93) (102) (111)
C(D)UKW16-D 84 91 98 105 112 119 133 147 161

— — — — JCQ
(109) (121) (128) (135) (142) (149) (163) (177) (191)
C(D)UKW20-D 150 163 177 191 205 219 247 275 303 331 359 387 415 CQ2
(185) (203) (217) (231) (245) (259) (286) (315) (343) (371) (399) (427) (455)
C(D)UKW25-D 276 296 316 336 357 377 421 462 500 541 582 623 664 RQ
(330) (355) (375) (395) (416) (436) (476) (516) (559) (600) (641) (682) (723)
C(D)UKW32-D
434
(507)
465
(543)
495
(573)
526
(604)
556
(634)
587
(665)
669
(747)
709
(787)
770
(848)
831
(909)
892
(970)
953
(1031)
1014
(1092)
CQM
* For the auto switch weight, refer to page 1575. CQU
Theoretical Output Tightening Torque MU
Specifications are the same as double When mounting the CUKW series, refer
acting, double rod (CUW series). Refer to to page 624.
Moisture page 631.
Control Tube
IDK Series Allowable Rotational Torque Auto Switch Mounting Position
Ensure that rotational torque is not For the auto switch mounting position
applied to the piston rod of the CUKW of the CUKW series, refer to page 634,
series. If rotational torque are applied since specifications are the same as D-
unavoidably, refer to page 643. double acting, double rod type.
Data
647
CUKW Series
Construction
Section AA
ø10
Section AA
ø16 to ø32
Section AA

2 Rod cover Aluminum alloy Chromated 13 Auto switch —
3 Rod cover retainer Aluminum alloy Hard anodized 14 Non-rotating plate Aluminum alloy Nickel plated
4 Piston Brass ø6 15 Guide rod Stainless steel
Brass ø6 16 Bushing Bearing alloy
5 Piston
Aluminum alloy ø10 to ø32, Chromated 17 Hexagon socket head cap screw Carbon steel Chromated
6 Piston rod Stainless steel 18 Hexagon socket head set screw Carbon steel Chromated
7 Piston rod Stainless steel ø6 19 Piston gasket
8 Bushing Bearing alloy 20∗ Piston seal
NBR
9 Bumper Urethane 21∗ Rod seal
10 Rod end nut Carbon steel Chromated 22∗ Gasket
11 Hexagon socket head cap screw Carbon steel Chromated

10 16 20 25 32
Kit no. CUW10D-PS CUW16D-PS CUW20D-PS CUW25D-PS CUW32D-PS
∗ Seal kit includes @0, @1, @2. Order the seal kit, based on each bore size.
648
Double Acting, Double Rod CUKW Series
Dimensions: Non-rotating Rod Type; Double Acting, Double Rod
ø6, ø10 Rod end nut
2 x øP through
4 x øT counterbore
Z + 2 x Stroke
ø16 to ø32 2 x øP through 2 x M5 x 0.8 (ø32: Rc 1/8)

Rod end nut
Auto switch
CUJ
Width
across flats L
2 x øP through
4 x øT counterbore
Width across
flats L
CU
Z + 2 x Stroke
Part no. Applicable bore
size (mm)
d H1 B1 C1 JCQ
NTP-006 6 M3 x 0.5 1.8 5.5 6.4
NTP-010 10 M4 x 0.7 2.4 7 8.1 CQ2
NTJ-015A 16 M5 x 0.8 4 8 9.2
NT-015A 20 M6 x 1.0 5 10 11.5 RQ
NT-02 25 M8 x 1.25 5 13 15.0
NT-03 32 M10 x 1.25 6 17 19.6
CQM
Bore size
A A' B C D E F FL FK FY GA GB H J L MM
(mm) CQU
6 7 — 13 22 3 7 8 9 11 20.5 15 16 18 10 — M3 x 0.5
10
16
10
11
—
12.5
15
20
24
32
4
6
7
7
8
8
12
17
12
13
22
28
16.5
16.5 Note)
16
19
21
26
11
14
—
5
M4 x 0.7
M5 x 0.8
MU
20 12 14 26 40 8 9 8 20 16 33 19 21.5 29 16 6 M6 x 1.0
25 15.5 18 32 50 10 10 10 22 20 43.5 21.5 22 33 20 8 M8 x 1.25
32 19.5 22 40 62 12 11 12 29 24 51.5 23 22.5 42 24 10 M10 x 1.25

P Q QA R SA T W Y
(mm) S Z S Z
6 3.2 — — 7 6 6 depth 4.8 13 10.5 38 75 38 75
10 3.2 — — 9 6 6 depth 5 16 11.5 36 79 36 79
16 4.5 4 2 12 7.5 7.6 depth 6.5 16 15.5 30 79.5 40 89.5 D-
20 5.5 9 4.5 16 9 9.3 depth 8 19 19.5 36 93 46 103
25 5.5 9 4.5 20 9 9.3 depth 9 23 24.5 40 105 50 115 -X
32 6.6 13.5 4.5 24 10 11 depth 11.5 27 30.5 42 121 52 131
Note 1 ) 5 stroke (CUKW16-5D): GA = 14.5 Technical
Note 2) The two chamfered positions for the double rod type are not identical. Data
649
Single Acting, Spring Return/Extend
CUK Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CUK 10 15 S
With auto switch CDUK 10 15 S M9BW

Made to Order
Non-rotating rod type Number of auto switches

Nil 2 pcs.
Bore size S 1 pc.
6 6 mm
25 25 mm
32 32 mm
Action
S Single acting, Spring return
Port thread type T Single acting, Spring extend
M5 x 0.8 ø6, ø10, ø16, ø20, ø25
Nil
Rc 1/8 ø32
TN NPT 1/8 ø32 Standard stroke (mm) If a built-in magnet cylinder without an auto
TF G 1/8 ø32 ø6, ø10, ø16 switch is required, there is no need to enter
ø20, ø25, ø32 5, 10, 15 the symbol for the auto switch.
(Example): CDUK20-10S
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
1 1  IC
3-wire (PNP) ∗
M9PAV M9PA
1 ∗ 1      circuit
(2-color indicator)
2-wire 12 V M9BAV∗1 M9BA∗1      —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
Consult with SMCregarding water resistant types with the above model numbers.
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
650
Single Acting, Spring Return/Extend CUK Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
Cushion Note 1) Rubber bumper on both ends
+ 1.0
Rod non-rotating accuracy Note 2) ±0.8° ±0.5°
Note 1) ø6: With auto switch, single rubber bumper
Note 2) No load: Rod at retracted
Symbol
Single acting, Single acting, Standard Stroke (mm)
Spring return Spring extend Bore size (mm) Standard stroke (mm)
6, 10, 16, 20, 25, 32 5, 10, 15
Minimum Stroke for Auto Switch Mounting (mm)

Rubber bumper Applicable auto switch
No. of auto
switches mounted D-A9, D-A9V D-M9, D-M9V D-M9W, D-M9WV
1 pc. 5 5 5
2 pcs. 10 5 10
Made to Order Specifications

(For details, refer to pages 1703 to 1896.) Weight /( ): Denotes the values with D-A93. (g)
Symbol Specifications Stroke (mm)
Model
-XC22 Fluororubber seals 5 10 15
28 31 34
Non-rotating plate with workpiece mounting C(D)UK6- S
-XC34
screw (No extended part on the rod end) T (33) (41) (44) CUJ
43 47 55
C(D)UK10- S
T (48) (57) (65) CU
60 66 81
C(D)UK16- S
T (85) (90) (111)
113 124 153
CQS
C(D)UK20- S
T (147) (164) (193)
212 229 271 JCQ
C(D)UK25- S
T (266) (288) (330)
C(D)UK32- S
331 357 422 CQ2
T (404) (435) (500)
∗ For the auto switch weight, refer to page 1575. RQ
CQM
Tightening Torque Auto Switch Mounting Position CQU
When mounting a CUK single acting series,
For the auto switch mounting position of
refer to page 624.
CDUK series single acting, spring MU
return/spring extend, refer to page 641,
since specification are the same as
Theoretical Output standard type, single acting, spring
Moisture return/spring extend type.
Specifications are the same as single acting,
Control Tube spring return/spring extend type (CU series).
IDK Series Refer to page 636.
Allowable Rotational Torque
When operating an actuator with a small diam- Make sure that rotational torque is not
applied to the piston rod of the CUK series
eter and a short stroke at a high frequency, the Spring Reaction Force single acting type cylinder. If the rotation
dew condensation (water droplet) may occur
inside the piping depending on the conditions. For the reactive force of spring return, refer torque were applied unavoidably, refer to D-
Simply connecting the moisture control tube to
to page 1899. page 643.
the actuator will prevent dew condensation -X
from occurring. For details, refer to the IDK se-
ries in the Best Pneumatics No. 6. Technical
Data
651
CUK Series
Construction
Single acting, Spring return
Section AA
ø10
Section AA
ø16 to ø32
Section AA

1 Cylinder tube Aluminum alloy Hard anodized 11 Retaining ring Carbon tool steel Phosphate coated
Brass ø6 to ø10, Electroless nickel plated 12 Rod end nut Carbon steel Chromated
2 Head cover
Brass ø6 14 Magnet holder Brass ø6
3 Piston
Aluminum alloy ø10 to ø32, Chromated 15 Magnet —
4 Piston Aluminum alloy ø10 16 Auto switch —
5 Piston rod Stainless steel 17 Non-rotating plate Aluminum alloy Nickel plated
6 Bumper A Urethane 18 Guide rod Stainless steel
7 Bumper B Urethane 19 Bushing Bearing alloy
8 Return spring Piano wire Zinc chromated 20 Hexagon socket head cap screw Carbon steel Chromated
9 Spring seat Brass 21 Hexagon socket head set screw Carbon steel Chromated
10 Spring seat Brass 22 Piston gasket
23∗ Piston seal NBR
24∗ Gasket
10 16 20 25 32
Kit no. CU10S-PS CU16S-PS CU20S-PS CU25S-PS CU32S-PS
∗ Seal kit includes @3, @4. Order the seal kit, based on each bore size.
652
Construction
Single acting, Spring extend
Section AA
ø10
Section AA
ø16 to ø32
CUJ
CU
CQS
Section AA JCQ

CQ2
Description Note Description Note
No.
1 Cylinder tube
Material
Aluminum alloy Hard anodized
No.
12 Rod end nut
Material
Carbon steel Chromated
RQ
Brass ø6 to ø10, Electroless nickel plated 13 Bushing Bearing alloy
2 Head cover
Aluminum alloy ø16 to ø32, Chromated 14 Plug with fixed orifice Alloy steel Black dyed CQM
Brass ø6 15 Magnet —
3 Piston
Aluminum alloy ø10 to ø32, Chromated 16 Auto switch — CQU
4 Piston Aluminum alloy ø10, Chromated 17 Non-rotating plate Aluminum alloy Nickel plated
5
6
Piston rod
Bumper A
Stainless steel
Urethane
18
19
Guide rod
Bushing
Stainless steel
Bearing alloy
MU
7 Bumper B Urethane 20 Hexagon socket head cap screw Carbon steel Black zinc chromated
8 Return spring Piano wire Zinc chromated 21 Hexagon socket head set screw Carbon steel Black zinc chromated
9 Spring seat Brass 22 Piston gasket
10 Stopper Brass ø6 23∗ Piston seal NBR
11 Retaining ring Carbon tool steel Phosphate coated 24∗ Rod seal

10 16 20 25 32 D-
Kit no. CU10T-PS CU16T-PS CU20T-PS CU25T-PS CU32T-PS
∗ Seal kit includes @3, @4. Order the seal kit, based on each bore size. -X
Order with the following part number when only the grease pack is needed. Technical
Grease pack part number: GR-S-010 (10 g) Data
653
CUK Series
Dimensions: Non-rotating Rod Type; Single Acting, Spring Return
2 x øP through Bleed port
Rod end nut M5 x 0.8
ø6, ø10
2 x NN

4 x øT counterbore
ø16 to ø32 Rod end nut

2 x øP through Bleed port M5 x 0.8 (ø32: Rc 1/8)
Width
across flats L
2 x øP through
2 x NN
4 x øT counterbore
Auto switch
Rod End Nut/Accessory Material: Carbon steel

Applicable bore
Part no. d H1 B1 C1
size (mm)
NTP-006 6 M3 x 0.5 1.8 5.5 6.4
NTP-010 10 M4 x 0.7 2.4 7 8.1
NTJ-015A 16 M5 x 0.8 4 8 9.2
NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0
NT-03 32 M10 x 1.25 6 17 19.6
Bore size
A A' B C D E F FL FK FY GA GB H J K L MM NN
(mm)
6 7 — 13 22 3 7 8 9 11 20.5 15 10 18 10 17 — M3 x 0.5 M3 x 0.5 depth 5
10 10 — 15 24 4 7 8 12 12 22 16.5 10 21 11 18 — M4 x 0.7 M3 x 0.5 depth 5
16 11 12.5 20 32 6 7 8 17 13 28 16.5 11.5 26 14 25 5 M5 x 0.8 M4 x 0.7 depth 6
20 12 14 26 40 8 9 8 20 16 33 19 12.5 29 16 30 6 M6 x 1.0 M5 x 0.8 depth 8
25 15.5 18 32 50 10 10 10 22 20 43.5 21.5 13 33 20 38 8 M8 x 1.25 M5 x 0.8 depth 8
32 19.5 22 40 62 12 11 12 29 24 51.5 23 12.5 42 24 48 10 M10 x 1.25 M6 x 1.0 depth 9

Bore size
P Q QA R T Y S Z S Z
(mm)
6 3.2 — — 7 6 depth 4.8 10.5 38 43 48 56 61 66 38 43 48 56 61 66
10 3.2 — — 9 6 depth 5 11.5 41 46 56 62 67 77 41 46 56 62 67 77
16 4.5 4 2 12 7.6 depth 6.5 15.5 35 40 50 61 66 76 45 50 60 71 76 86
20 5.5 9 4.5 16 9.3 depth 8 19.5 41 46 56 70 75 85 51 56 66 80 85 95
25 5.5 9 4.5 20 9.3 depth 9 24.5 45 50 60 78 83 93 55 60 70 88 93 103
32 6.6 13.5 4.5 24 11 depth 11.5 30.5 47 52 62 89 94 104 57 62 72 99 104 114
654
Dimensions: Non-rotating Rod Type; Single Acting, Spring Extend
2 x øP through M5 x 0.8 Plug with fixed orifice
Rod end nut
ø6, ø10
2 x NN

4 x øT counterbore
H + Stroke
ø16 to ø32 2 x øP through M5 x 0.8 (ø32: Rc 1/8)

Plug with fixed orifice
Rod end nut
2 x NN
Width
across flats L
2 x øP through
4 x øT counterbore
CUJ
H + Stroke Auto switch
CU
Applicable bore
Part no. d H1 B1 C1
size (mm) JCQ
NTP-006 6 M3 x 0.5 1.8 5.5 6.4
NTP-010
NTJ-015A
10
16
M4 x 0.7
M5 x 0.8
2.4 7
8
8.1
9.2
CQ2
4
NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0 RQ
NT-03 32 M10 x 1.25 6 17 19.6
CQM
Bore size
(mm)
A A' B C D E F FL FK FY GA GB H J K L MM NN CQU
6 7 — 13 22 3 7 8 9 11 20.5 15 10 18 10 17 — M3 x 0.5 M3 x 0.5 depth 5
10 10 — 15 24 4 7 8 12 12 22 16.5 10 21 11 18 — M4 x 0.7 M3 x 0.5 depth 5 MU
16 11 12.5 20 32 6 7 8 17 13 28 16.5 11.5 26 14 25 5 M5 x 0.8 M4 x 0.7 depth 6
20 12 14 26 40 8 9 8 20 16 33 19 12.5 29 16 30 6 M6 x 1.0 M5 x 0.8 depth 8
25 15.5 18 32 50 10 10 10 22 20 43.5 21.5 13 33 20 38 8 M8 x 1.25 M5 x 0.8 depth 8
32 19.5 22 40 62 12 11 12 29 24 51.5 23 12.5 42 24 48 10 M10 x 1.25 M6 x 1.0 depth 9

Bore size
P Q QA R T Y S Z S Z
(mm)
5 st 10 st 15 st 5 st 10 st 15 st 5 st 10 st 15 st 5 st 10 st 15st
6
10
3.2 —
3.2 —
—
—
7 6 depth 4.8
9 6 depth 5
10.5
11.5
38
41
43
46
48
56
61
67
71
77
81
92
38
41
43
46
48
56
61
67
71
77
81
92
D-
16 4.5 4 2 12 7.6 depth 6.5 15.5 45 50 60 76 86 101 45 50 60 76 86 101
20 5.5 9 4.5 16 9.3 depth 8 19.5 41 46 56 75 85 100 51 56 66 85 95 110 -X
25 5.5 9 4.5 20 9.3 depth 9 24.5 45 50 60 83 93 108 55 60 70 93 103 118
Technical
32 6.6 13.5 4.5 24 11 depth 11.5 30.5 47 52 62 94 104 119 57 62 72 104 114 129 Data
655
Free Mount Cylinder: Long Stroke Type
CU Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CU 6 30
60 D
With auto switch CDU 6 30

60 D M9BW
Made to Order
Built-in magnet ∗ Refer to page 657 for the Made
to Order specifications.

Bore size
Nil 2 pcs.
6 6 mm
S 1 pc.
10 10 mm
32 32 mm

Action
Port thread type If a built-in magnet cylinder without an auto
Nil (Example): CDU20-80D
Rc 1/8 ø32
TN NPT 1/8 ø32 Long stroke (mm)
TF G 1/8 ø32 ø6, ø10, ø16 40, 50, 60
ø20, ø25, ø32 60, 70, 80, 90, 100
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
1 1  IC
3-wire (PNP) ∗
M9PAV M9PA
1 ∗ 1      circuit
(2-color indicator)
2-wire 12 V M9BAV∗1 M9BA∗1      —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
656
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
+ 1.0
Symbol Standard Stroke

Double acting, Spring rod, Rubber bumper Bore size (mm) Standard stroke (mm)
6, 10, 16 40, 50, 60
20, 25, 32 60, 70, 80, 90, 100

Made to Order Specifications Model
Stroke (mm)
(For details, refer to pages 1703 to 1896.) 40 50 60 70 80 90 100
Symbol Specifications C(D)U6-D 43 49 55
(53) (59) (65) — — — —
-XB6 Heat resistant (–10 to 150°C)
-XB7 Cold resistant (–40 to 70°C) C(D)U10-D 64 72 80 — — — —
(74) (82) (90)
-XB13 Low speed (5 to 50 mm/s) 92 104 116
C(D)U16-D (122) (134) (146)
— — — —
-XC19 Intermediate stroke (5 mm spacer)
-XC22 Fluororubber seals — — 216 238 260 282 304
C(D)U20-D (253) (275) (297) (319) (341)
— — 363 397 431 465 499

C(D)U25-D (422) (456) (490) (524) (558)
526 574 622 670 718 CUJ
C(D)U32-D — —
(604) (652) (700) (748) (796)
∗ For the auto switch weight, refer to page 1575. CU
CQS
Auto Switch Mounting Position JCQ

For the auto switch mounting position of CQ2
CDU long stroke series, refer to page 628,
since specifications are the same as
standard type, double acting, single rod RQ
type.
CQM
Tightening Torque CQU
Refer to page 624 for mounting a long stroke
type. MU
Moisture Theoretical Output

Control Tube Specifications are the same as CU series
IDK Series double acting, single rod. Refer to page 624.
D-
Data
657
CU Series
Construction
ø10
ø16 to ø32

1 Cylinder tube Aluminum alloy Hard anodized 8 Retaining ring Carbon tool steel Phosphate coated
2 Rod cover Aluminum alloy Hard anodized 9 Rod end nut Carbon steel Chromated
Brass ø6 to ø10, Electroless nickel plated 10 Magnet holder Brass ø6
3 Head cover
Aluminum alloy ø16 to ø32, Chromated 11 Magnet —
Brass ø6 12 Auto switch —
4 Piston
Aluminum alloy ø10 to ø32, Chromated 13 Piston gasket
5 Piston rod Stainless steel 14∗ Piston seal
NBR
6 Bumper A Urethane 15∗ Rod seal
7 Bumper B Urethane 16∗ Gasket

(mm)
10 CU10D-PS
16 CU16D-PS
20 CU20D-PS Set of nos. above !4, !5, !6.
25 CU25D-PS
32 CU32D-PS
658
Dimensions: Double Acting, Single Rod
ø6, ø10
Rod end nut
4 x NN
2 x øP through
4 x øT counterbore Auto switch
S + Stroke
Z + Stroke
ø16 to ø32
2 x øP through
2 x M5 x 0.8 (ø32: Rc 1/8)
Rod end nut
4 x NN
CUJ
CU
CQS
Width across Applicable
flats L Part no. d H1 B1 C1
bore (mm)
2 x øP through
NTP-006 6 M3 x 0.5 1.8 5.5 6.4 JCQ
4 x øT counterbore
NTP-010 10 M4 x 0.7 2.4 7 8.1
S + Stroke Auto switch
NTJ-015A 16 M5 x 0.8 4 8 9.2 CQ2
Z + Stroke
NT-015A 20 M6 x 1.0 5 10 11.5
NT-02 25 M8 x 1.25 5 13 15.0 RQ
NT-03 32 M10 x 1.25 6 17 19.6
CQM
(mm)
Bore size
(mm) A A' B C D E GA GB H J K L MM NN P Q QA CQU
6 7 — 13 22 3 7 15 10 13 10 17 — M3 x 0.5 M3 x 0.5 depth 5 3.2 — —
10 10 — 15 24 4 7 16.5 10 16 11 18 — M4 x 0.7 M3 x 0.5 depth 5 3.2 — —
MU
16 11 12.5 20 32 6 7 16.5 11.5 16 14 25 5 M5 x 0.8 M4 x 0.7 depth 6 4.5 4 2
20 12 14 26 40 8 9 19 12.5 19 16 30 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 9 4.5
25 15.5 18 32 50 10 10 21.5 13 23 20 38 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 9 4.5
32 19.5 22 40 62 12 11 23 12.5 27 24 48 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 13.5 4.5

(mm) R T
S Z S Z
6 7 6 depth 4.8 33 46 33 46
10 9 6 depth 5 36 52 36 52 D-
16 12 7.6 depth 6.5 30 46 40 56
20
25
16
20
9.3 depth 8
9.3 depth 9
36
40
55
63
46
50
65
73
-X
32 24 11 depth 11.5 42 69 52 79 Technical
Data
659
Non-rotating Rod, Double Acting, Single Rod
CUK Series
ø6, ø10, ø16, ø20, ø25, ø32
How to Order
CUK 6 60 D
With auto switch CDUK 6 60 D M9BW

Made to Order

Non-rotating rod type Nil 2 pcs.
S 1 pc.
Bore size
6 6 mm
Auto switch
10 10 mm
16 16 mm
∗ Refer to the table below for applicable auto switches.
20 20 mm
25 25 mm
32 32 mm Built-in Magnet Cylinder Model
Action If a built-in magnet cylinder without an auto
Port thread type D Double acting switch is required, there is no need to enter
Symbol Type Bore size the symbol for the auto switch.
M5 x 0.8 ø6, ø10, ø16, ø20, ø25 (Example): CDUK20-80D
Nil Cylinder stroke (mm)
Rc 1/8 ø32
TN NPT 1/8 ø32 ø6, ø10, ø16 40, 50, 60
TF G 1/8 ø32 ø20, ø25, ø32 60, 70, 80, 90, 100
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
(2-color indicator)
2-wire 12 V M9BAV∗ M9BA∗    
1 1  —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
660
Non-rotating Rod, Double Acting, Single Rod CUK Series
Specifications
Bore size (mm) 6 10 16 20 25 32
Fluid Air
+ 1.0
Note) No load: Rod at retracted
Symbol Standard Stroke (mm)

Double acting, Single rod, Rubber bumper
6, 10, 16 40, 50, 60
20, 25, 32 60, 70, 80, 90, 100

Stroke (mm)
Model
Made to Order Specifications 40 50 60 70 80 90 100
(For details, refer to pages 1703 to 1896.)
C(D)UK6-D 49 55 61
— — — —
Symbol Specifications (59) (65) (71)
-XB6 Heat resistant (–10 to 150°C) 71 79 87
C(D)UK10-D (81) (89) (97)
— — — —
-XB7 Cold resistant (–40 to 70°C)
-XB9 Low speed (10 to 50 mm/s) 102 114 126
C(D)UK16-D (132) (144) (156)
— — — —
-XC19 Intermediate stroke (5 mm spacer) 243 267 291 315 339
C(D)UK20-D — —
(284) (308) (332) (356) (380)
-XC22 Fluororubber seals CUJ
Non-rotating plate with workpiece mounting — — 405 440 475 510 545
-XC34 C(D)UK25-D (460) (495) (530) (565) (600)
screw (No extended part on the rod end)
CU
— — 617 669 721 773 825
C(D)UK32-D (695) (747) (799) (851) (903)
CQS
JCQ
Allowable Rotational Torque CQ2
Make sure that rotational torque is not applied
to the piston rod of a long stroke type cylinder. If RQ
the rotation torque were applied unavoidably,
refer to page 643 for details.
CQM
Tightening Torque CQU

When mounting a CUK long stroke series, refer
to page 624. MU
Moisture Theoretical Output

Control Tube Specifications are the same as CU series
IDK Series double acting, single rod. Refer to page 624.
Auto Switch Mounting Position
D-
For the auto switch mounting position of
Simply connecting the moisture control tube to the CDUK long stroke series, refer to page 628,
actuator will prevent dew condensation from oc- since specifications are the same as standard -X
curring. For details, refer to the IDK series in the type, double acting, single rod type.
Data
661
CUK Series
Construction
Section AA
ø10
Section AA
ø16 to ø32
Section AA

2 Rod cover Aluminum alloy Hard anodized 12 Auto switch —
Brass ø6 to ø10, Electroless nickel plated 13 Non-rotating plate Aluminum alloy Nickel plated
3 Head cover
Aluminum alloy ø16 to ø32, Chromated 14 Guide rod Stainless steel
Brass ø6 15 Bushing Bearing alloy
4 Piston
Aluminum alloy ø10 to ø32, Chromated 16 Hexagon socket head cap screw Carbon steel Chromated
5 Piston rod Stainless steel 17 Hexagon socket head set screw Carbon steel Chromated
6 Bumper A Urethane 18 Piston gasket
7 Bumper B Urethane 19 Piston seal
NBR
8 Retaining ring Carbon tool steel Phosphate coated 20 Rod seal
9 Rod end nut Carbon steel Chromated 21 Gasket
10 Magnet holder Brass ø6

(mm)
10 CU10D-PS
16 CU16D-PS
20 CU20D-PS Set of nos. above !9, @0, @1.
25 CU25D-PS
32 CU32D-PS
∗ Seal kit includes !9, @0, @1. Order the seal kit, based on each bore size.
662
Non-rotating Rod, Double Acting, Single Rod CUK Series
Dimensions: Non-rotating Rod Type; Double Acting, Single Rod
Rod end nut
ø6, ø10
2 x NN
2 x øP through
4 x øT counterbore Auto switch
S + Stroke
Z + Stroke
ø16 to ø32
Rod end nut
2 x NN
Width
across flats L
2 x øP through
CUJ
4 x øT counterbore
Auto switch
Z + Stroke
S + Stroke
CU
CQS
Rod End Nut/Accessory Material: Carbon steel

size (mm)
d H1 B1 C1 JCQ
NTP-006 6 M3 x 0.5 1.8 5.5 6.4
NTP-010 10 M4 x 0.7 2.4 7 8.1 CQ2
NTJ-015A 16 M5 x 0.8 4 8 9.2
NT-015A 20 M6 x 1.0 5 10 11.5 RQ
NT-02 25 M8 x 1.25 5 13 15.0
NT-03 32 M10 x 1.25 6 17 19.6 CQM
Bore size CQU

A A' B C D E F FL FK FY GA GB H J K L MM
(mm)
6 7 — 13 22 3 7 8 9 11 20.5 15 10 18 10 17 — M3 x 0.5 MU
10 10 — 15 24 4 7 8 12 12 22 16.5 10 21 11 18 — M4 x 0.7
16 11 12.5 20 32 6 7 8 17 13 28 16.5 11.5 26 14 25 5 M5 x 0.8
20 12 14 26 40 8 9 8 20 16 33 19 12.5 29 16 30 6 M6 x 1.0
25 15.5 18 32 50 10 10 10 22 20 43.5 21.5 13 33 20 38 8 M8 x 1.25
32 19.5 22 40 62 12 11 12 29 24 51.5 23 12.5 42 24 48 10 M10 x 1.25

NN P Q QA R T Y
(mm) S Z S Z
6 M3 x 0.5 depth 5 3.2 — — 7 6 depth 4.8 10.5 33 51 33 51
10 M3 x 0.5 depth 5 3.2 — — 9 6 depth 5 11.5 36 57 36 57 D-
16 M4 x 0.7 depth 6 4.5 4 2 12 7.6 depth 6.5 15.5 30 56 40 66
20 M5 x 0.8 depth 8 5.5 9 4.5 16 9.3 depth 8 19.5 36 65 46 75 -X
25 M5 x 0.8 depth 8 5.5 9 4.5 20 9.3 depth 9 24.5 40 73 50 83
32 M6 x 1.0 depth 9 6.6 13.5 4.5 24 11 depth 11.5 30.5 42 84 52 94
Technical
Data
663
Free Mount Cylinder with Air Cushion
CU Series
New air cushion mechanism
Extended dimensions (compared to the standard

CU models) are hardly noticeable.
(with rubber bumper)
• Overall length: +1.5 to 7 mm with

CU hion
air cu
s
(mm)
Bore Extended dimensions
• Overall height: +0 to 2 mm size Length Height
No air cushion protrusion. CU ø20 7 2

with per
r bum ø25 1.5 0
• Overall width: not affected rubbe
ø32 4 0
Unique air cushion construction requires no cushion ring.

Working A + A' A' q When the piston is retracting, air is exhausted
principle through both A and A' until piston seal H
passes air passage A.
w After piston seal H has passed air passage A,
air is exhausted only through A'. The section
A marked with slanted lines becomes a cushion
A' A' chamber, and an air cushion effect is
achieved.
e When air is supplied for the piston extension,
R H R H the check valve opens and the piston extends
Piston
seal with no delay.
664
Free mounting
3 types of mounting orientations can be accommodated depending on the installation conditions.
Axial mounting (Tapped hole) Vertical mounting (Body through-hole) Lateral mounting (Body through-hole)
Approximately 2.4 times of allowable kinetic energy

(Compared to the old CU series with rubber bumper)
Improved allowable kinetic energy absorption. Improved sound insulation

CU series comparison (Reduced impact noise at the stroke end)
Allowable kinetic energy (J)
: with air cushion • Noise reduction of more than 11 dB is possible

: with rubber bumper (compared to the CU20 series with rubber bumper).
3
2
Interchangeable mounting
Mounting dimensions (J, K, R, and E) are the same
as the rubber bumper type CU series.
CUJ
1 0.70
0.44 CU
0.28 0.29
0.11 0.18
CQS
R
20 25 32
Bore size (mm) E JCQ
CQ2
Improved repeatability
K
RQ
When compared to rubber bumper type actuators, air
cushion type cylinders are less likely to be affected by E CQM
pressure fluctuations, and therefore better able to
achieve a stable and smooth stroke. CQU
MU
Size Variations
Model Standard stroke Auto switch
20 30 40 50 60 70 80 90 100
C(D)U20 • ø20 to ø32
C(D)U25 Direct mounting type
C(D)U32 auto switch D-
-X
Technical
Data
665
Free Mount Cylinder with Air Cushion
CU Series
ø20, ø25, ø32
How to Order
CU 32 50 A
With auto switch CDU 32 50 A M9BW
With auto switch Nil 2 pcs.
(Built-in magnet) S 1 pc.
Bore size Auto switch

25 25 mm ∗ Refer to the table below for
32 32 mm applicable auto switches.

Thread type If a built-in magnet cylinder without an auto
Symbol Type Bore size switch is required, there is no need to enter
M5 x 0.8 ø20, ø25 the symbol for the auto switch.
Nil (Example): CDU25-50A
Rc 1/8 ø32
TN NPT 1/8
ø32 Air cushion
TF G 1/8
A With air cushion
Cylinder stroke (mm)

Refer to next page for
“Standard Stroke”.
Indicator light

(Nil) (M) (L) (Z)
5 V, 12 V
2-wire 12 V M9BV M9B      —
auto switch
Solid state

2-wire 12 V M9BWV M9BW      —
(2-color indicator)
2-wire 12 V M9BAV∗ M9BA∗    
1 1  —
3-wire IC
auto switch
— 5V — A96V A96  —  — — —
Reed
— Grommet
100 V A93V∗2 A93     — — Relay,
2-wire 24 V 12 V
1 m ··················· M (Example) M9NWM
3 m ··················· L (Example) M9NWL
5 m ··················· Z (Example) M9NWZ
666
Free Mount Cylinder with Air Cushion CU Series
Specifications
Type Pneumatic (Non-lube)

Fluid Air
Minimum operating pressure 0.08 MPa
Without auto switch: –10°C to 70°C (No freezing)
With auto switch: –10°C to 60°C (No freezing)
+ 1.0
Stroke length tolerance 0
Effective Cushion Length
Bore size (mm) 20 25 32

Effective cushion length (mm) 6.6 6.7 7.7
Standard Stroke

20, 25, 32 20, 30, 40, 50, 60, 70, 80, 90, 100
∗ Intermediate strokes are also available upon receipt of order. Please contact SMC.
Minimum stroke length is 20 mm.
When mounting the CU series

Tightening Torque/ refer to the table below. Theoretical Output
Bore size Hexagon socket Proper tightening
(mm) head cap screw size torque (N·m) OUT IN
20, 25 M5 5.10 ±10% (N)
32 M6 8.04 ±10%
Bore size (mm)
Operating Operating pressure (MPa) CUJ
direction 0.3 0.5 0.7
20
OUT 94.2 157 220 CU
IN 79.2 132 185
Allowable Kinetic Energy 25

OUT 147 246 344 CQS
IN 124 206 288
Refer to “Selection” on page 672
regarding allowable kinetic energy. 32
OUT 241 402 563 JCQ
IN 207 346 454
CQ2
Weight RQ
CQM
Basic Weight (g)
Bore size Standard stroke (mm) CQU
(mm) 20 30 40 50 60 70 80 90 100
20 186 208 230 252 274 296 318 340 362 MU
25 289 323 357 391 425 459 493 527 561
32 464 512 560 608 656 704 752 800 848
Moisture
Control Tube Additional Weight (g)
IDK Series Bore size (mm) Magnet
When operating an actuator with a small diameter 20 5
and a short stroke at a high frequency, the dew 25 6
32 11 D-
Data
667
CU Series
Construction
u t !4 w q r !3 !0 !2 i o !5 e y
!1
Component Parts Replacement Parts: Seal Kit

No. Description Material No. of pcs. Note Bore size (mm) Kit no. Contents
1 Cylinder tube Aluminum alloy 1 Hard anodized ø20 CU20A-PS
Set of nos. above
2 Rod cover Aluminum alloy 1 Hard anodized ø25 CU25A-PS
!3, !4, !5.
3 Head cover Aluminum alloy 1 Chromated ø32 CU32A-PS
4 Piston Aluminum alloy 1 Chromated ∗ Seal kit includes !3, !4, !5. Order the seal kit, based on
5 Piston rod Stainless steel 1 each bore size.
6 Retaining ring Carbon tool steel 1 Phosphate coated
Order with the following part number when only the
7 Rod end nut Carbon steel 1 Chromated grease pack is needed.
8 Cushion needle assembly — (2) Grease pack part number: GR-S-010 (10 g)
9 Steel ball Carbon steel 2
10 Magnet — 1
11 Auto switch — (2)
12 Piston gasket NBR 1
13 Piston seal NBR 2
14 Rod seal NBR 1
15 Gasket NBR 1
668
Free Mount Cylinder with Air Cushion CU Series
Dimensions
2 x cushion needle
2 x port
2 x øP through
Q
R
E
GA GB
4 x NN
MM
øD
CB
K
J
CA
JA
A 2 x øP through
KA
B Width across flats L A' E 4 x øT counterbore

H S + Stroke
Z + Stroke
CUJ
(mm)
CU
Bore size
Port size A A' B C CA CB D E GA GB H J JA
(mm)
CQS
20 M5 x 0.8 12 14 26 42 20 22 8 9 29 27 19 16 12
25 M5 x 0.8 15.5 18 32 50 25 25 10 10 32.5 22.5 23 20 15
32 1/8 19.5 22 40 62 31 31 12 11 35 25 27 24 19 JCQ
Bore size
K KA L MM NN P Q R T S Z Standard stroke
CQ2
(mm)
20 30 5 6 M6 x 1.0 M5 x 0.8 depth 8 5.5 13 16 9.3 depth 8 53 72
20, 30, 40, 50, 60, RQ
25 38 6 8 M8 x 1.25 M5 x 0.8 depth 8 5.5 23.5 20 9.3 depth 9 51.5 74.5
70, 80, 90, 100
32 48 7 10 M10 x 1.25 M6 x 1.0 depth 9 6.6 29 24 11 depth 11.5 56 83
CQM
CQU
MU
Material: Carbon steel D-

d H1 B1 C1
NT-015A
size (mm)
20 M6 x 1.0 5 10 11.5
-X
NT-02 25 M8 x 1.25 5 13 15.0 Technical
NT-03 32 M10 x 1.25 6 17 19.6 Data
669
CU Series
Proper Auto Switch Mounting Position (Detection at stroke end) and Its Mounting Height
D-A9
D-M9
D-M9W
A (22) 24.5
D-M9A
2.8
0.5 W B
D-A9V
D-M9V
D-M9WV
D-M9AV A 20 (22)
5.5 (5) W B
( ): Denotes the values of D-M9V, D-M9WV.
(mm)
Bore size D-A9, D-A9V D-M9, D-M9W D-M9V, D-M9WV D-M9A D-M9AV
20 18 15 13 (10.5) 22 19 9 22 19 11 22 19 11 22 19 13
25 20 11 9 (6.5) 24.5 15 5 24.5 15 7 24.5 15 7 24.5 15 9
32 22.5 13.5 11.5 (9) 26.5 17.5 7.5 26.5 17.5 9.5 26.5 17.5 9.5 26.5 17.5 11.5
Note 1) Figures in the table above are used as a reference when mounting the auto switches for stroke end detection.
In the case of actually setting the auto switches, adjust them after confirming their operation.
Note 2) Values in ( ) are dimensions for D-A90 and A93 type.
Operating Range
(mm)
Bore size (mm)
Switch model
20 25 32
D-A9, A9V 11 12.5 14
D-M9, M9V
D-M9W, M9WV 7 7 7.5
D-M9A, M9AV
∗ Since the operating range is provided as a guideline
including hysteresis, it cannot be guaranteed (assuming
approximately ±30% dispersion).
It may vary substantially depending on an ambient
environment.
670
Auto Switch Mounting CU Series
Auto Switch Rail Position
4 x ø4.2
4x3
B
(mm)
Bore size (mm) A B
20 21 23
25 27 25
A 32 35 27
Caution on Proximity Installation
When free mounting cylinders equipped with auto

switches are used, the auto switches could activate Bore size (mm) Mounting pitch L (mm)
unintentionally if the installed distance is less than 20 40
the dimensions shown in the table. Therefore, make 25 46
sure to provide a greater clearance. Due to
32 56
unavoidable circumstances, if they must be used with
less distance than the dimensions given in the table,
the cylinders must be shielded. Therefore, affix a
steel plate or a magnetic shielding plate (MU-S025)
to the area on the cylinder that corresponds to the
adjacent auto switch. (Please contact SMC for L
details.) Auto switches may malfunction if a shielding
plate is not used.
Dimensions of shielding plate (MU-S025) that is sold

separately are indicated as reference. CUJ
CU
18
36 CQS
The product can be attached to the cylinder since the
JCQ
bottom side is a seal type.
CQ2
RQ
CQM
CQU
MU
D-
-X
Technical
Data
671
CU Series
Specific Product Precautions
Be sure to read this before handling the products. Refer to back page 50 for Safety
Instructions and pages 3 to 12 for Actuator and Auto Switch Precautions.
Installation and Removal of Retaining Rings Selection

Caution Caution
1. Use appropriate pliers (Type C retaining ring install- 3. Adjust the cushion needle to reduce excessive
ing tool) for installation and removal of retaining kinetic energy from the piston impact at the stroke
rings. end by allowing it to absorb sufficient kinetic
2. Even when using appropriate pliers (Type C retaining energy during the cushion stroke.
ring installing tool), proceed with caution as there is If due to improper adjustment, the piston impacts the stroke
a danger of the retaining ring flying off the end of the end with excessive kinetic energy (values above those given in
pliers (tool) and causing bodily injury or damage to Table (1)), an excessive impact will occur and this may cause
nearby equipment. After installation, make sure that damages to equipment.
the retaining ring is securely seated into the retaining
Table (1) Allowable Kinetic Energy at Piston Impact (J)
ring groove before supplying air.
20 25 32
Mounting Allowable kinetic energy 0.055 0.09 0.15
Caution 4. Strictly observe the limiting ranges for the piston rod
1. Refer to the below table for mounting cylinders. lateral load (Graph (2)).
Tightening Torque If operated beyond the limiting ranges, equipment life may be
Bore sizes Hexagon socket head cap screw Proper tightening torque reduced or damage to equipment may occur.
(mm) (mm) (N◊m)
20, 25 M5 5.10 ±10% Piston Rod Lateral Load (Graph (2))
32 M6 8.04 ±10% 5.00
4.50
4.00
Selection 3.50
Lateral load (N)
Caution 3.00
2.50
ø32
1. Operate the cylinder to the stroke end.
2.00
When the stroke is restricted by an external stopper or a ø25
clamped workpiece, sufficient cushioning and noise reduction 1.50
may not be achieved. ø20
1.00
2. Strictly observe the limiting ranges for load mass 0.50
and maximum speed (Graph (1)). Also, the limiting 0.00
ranges provided here are based on the condition 20 30 40 50 60 70 80 90 100
that the cylinder is operated to the stroke end with a Stroke (mm)
proper cushion needle adjustment.
If operated beyond the limiting ranges, excessive impact will
occur and this may cause damage to equipment.
Cushion Needle Adjustment
: Operating pressure 0.5 MPa
Graph (1) : Operating pressure 0.4 MPa
Caution
25.00 1. Keep the adjustment range for the cushion needle
between the fully closed position and the rotations
shown below.
20.00
Rotations
Load mass (kg)
ø20 to ø32 2.5 rotations or less

15.00
Use a 3 mm flat head watchmakers’ screwdriver to adjust the
cushion needle. The adjustment range for the cushion needle
must be between the fully closed position and the open position
10.00 ranges indicated in the above table. A retaining mechanism
prevents the cushion needle from slipping out; however, it may
spring out during operation if it is rotated beyond the ranges
ø32
5.00 shown above.
ø25
ø20
0.00
10 100 1000
Maximum speed (mm/s)
672
Free Mount Cylinder for Vacuum
ZCUK Series
A free mount cylinder with a vacuum passage in the rod to

meet the requirements for Air cylinder + Vacuum pad .
A vacuum passage has been provided in the rod of the CUK cylinder to enable a vacuum pad to be
installed on the end of the rod.
Not necessary to provide vacuum tubing space at the end of the rod.
The area around the vacuum pad is uncluttered.
Non-rotationg rod
A guide is provided as standard
Auto switch CUJ
equipment Reed auto switch:
Non-rotating rod accuracy D-A9 (Heavy-duty cord, in-line entry) CU
(no load: when the rod is D-A9V (Heavy-duty cord, perpendicular entry)
retracted on the detent plate side):
ø10, ø16 ±0.8°
Solid state auto switch: CQS
D-M9, D-M9W (Heavy-duty cord, in-line entry)
ø20, ø25, ø32 ±0.5° D-M9V, D-M9WV (Heavy-duty cord, perpendicular entry)
Do not apply a lateral load to the JCQ
piston rod. Because the piston rod
is a hollow rod, a lateral load can CQ2
cause the piston rod to bend or break. How to provide piping to the
vacuum side RQ
Cap piping
Vacuum pad (Pad diameter: ø2 to ø50)
The piston rod of the vacuum side does not protrude. CQM
<Perpendicular <Male thread> Also, the vacuum outlet tube does not move when the piston is
female thread> operating.
Vacuum port pressure range: –101 kPa to 0.6 MPa
CQU
Pressurize only when releasing the vacuum. At that
time, use it under the cylinder operating pressure. MU
Rod piping
Lighter weight than the cap piping.
Can also be used for air blowing.
<Direct mounting> Vacuum port pressure range: –101 kPa to 0.6 MPa
D-
<Barb fitting>
-X
Technical
Data
673
Free Mount Cylinder for Vacuum
ZCUK Series How to Order
ZCUK C 16 20 D
With
auto switch ZC D UK C 16 20 D M9BW Nil 2 pcs.
S 1 pc.
Built-in magnet Acting Auto switch

Type (Tubing method in vacuum side)/ D Double acting Nil Without auto switch
(Rod end shape) ∗ Refer to the table below for
Bore size applicable auto switches.
C Cap piping/Male thread
10 10 mm Port thread type Built-in Magnet Cylinder Model
D Cap piping/Pad direct mounting
16 16 mm Symbol Type Bore size
Q Rod piping/Male thread If a built-in magnet cylinder without an auto
20 20 mm M5 x 0.8 ø10, ø16, ø20, o25
R Rod piping/Pad direct mounting Nil switch is required, there is no need to enter
25 25 mm Rc1/8 ø32 the symbol for the auto switch.
32 32 mm TN NPT1/8 ø32 (Example) ZCDUKC20-20D
Note)
TF G1/8 ø32 Cylinder standard stroke (mm)
Note) In the case of rod piping (Q, R), TF 10, 16 5, 10, 15, 20, 25, 30
(G1/8) is not available. 20, 25, 32 5, 10, 15, 20, 25, 30, 40, 50
Applicable Auto Switches/Refer to pages 1575 to 1701 for the detailed specifications on auto switches.
Indicator light
Electrical Pre-wired
Type Special function Wiring (Output) 0.5 1 3 5 Applicable load
entry DC AC Perpendicular In-line connector
(Nil) (M) (L) (Z)
3-wire (NPN) M9NV M9N IC
5 V, 12 V
Solid state auto switch
— 3-wire (PNP) M9PV M9P circuit

2-wire 12 V M9BV M9B —
3-wire (NPN) M9NWV M9NW IC
Yes
Grommet 3-wire (PNP) 24 V — M9PWV M9PW circuit

PLC
(2-color indicator)
2-wire 12 V M9BWV M9BW —
3-wire (NPN) M9NAV∗1 M9NA∗1 IC
Water resistant 5V,12V
3-wire (PNP) M9PAV∗1 M9PA∗1 circuit
(2-color indicator)
2-wire 12V M9BAV∗1 M9BA∗1 —
3-wire
auto switch
IC
— 5V — A96V A96 —
Yes
(NPN equivalent) circuit

Reed
— Grommet
100 V A93V∗2 A93 — Relay,
2-wire 24 V 12 V
No 100 V or less A90V A90 IC circuit PLC
∗1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance.Consult with SMC regarding water resistant types with the above model numbers.
∗ Lead wire length symbols: 0.5 m·········· Nil (Example) M9NW ∗ Solid state auto switches ∗ Refer to pages 1648 and 1649 for the details on auto switches with a
1 m·········· M (Example) M9NWM marked with “” are produced pre-wired connector.
3 m·········· L (Example) M9NWL upon receipt of order. ∗ Auto switches are shipped together but not assembled.
5 m·········· Z (Example) M9NWZ
How to Order Vacuum Pad Note) Refer to page 676 for combination of cylinder and pad.
In the case of rod end male In the case of pad direct mounting
ZPT 02 U N B4 ZP 04 U N X11
Pad dia. (mm) Vacuum entry (Mounting thread diameter)
Pad dia. (mm)
02 ø2 Symbol Thread dia. ø2 to ø8 ø10 to ø16 ø20 to ø32 ø40, ø50 Suffix
02 ø2
04 ø4 B4 M4 x 0.7
Female thread
04 ø4 Applicable
B5 M5 x 0.8 Symbol
06 ø6 06 ø6 cylinder model
08 ø8 B6 M6 x 1 X11 ZC(D)UK D
08 ø8 R10
10 ø10 B8 M8 x 1.25
10 ø10 Nil ZC(D)UKD
R16 to 32
13 ø13 Material B10 M10 x 1.25
13 ø13 Note) -X11 pad: ø2 to ø8
16 ø16 N NBR 16 ø16 diameter and flat
20 ø20 S Silicone rubber 20 ø20 type only.
25 ø25 U Urethane rubber 25 ø25 Material
32 ø32 F FKM 32 ø32
40 ø40 N NBR
GN Conductive NBR (ø2 to ø16 only) 40 ø40
50 ø50 S Silicone rubber
GS Conductive silicone rubber (ø2 to ø16 only) 50 ø50 U Urethane rubber
Pad type
Application: Table (1) Pad Dia./Pad Type Pad type F FKM
Refer to “Table (1)”. Type
Dia. (mm) 2 4 6 8 10 13 16 20 25 32 40 50 U Flat Conductive NBR
GN (ø2 to ø16 only)
U Flat Flat C Flat with ribs
C Flat with ribs Flat with ribs D Deep Conductive silicone
GS rubber (ø2 to ø16 only)
D Deep Deep Bellows
B (Except “-X11”)
B Bellows Bellows
674
Free Mount Cylinder for Vacuum ZCUK Series
Tubing system in Model Rod end shape Applicable pad type

vacuum side
Refer to page 676 for details.
ZCUKC
Cap piping Vacuum Male thread
ZCUKD
ZPT Series
(Perpendicular vacuum
Pad direct
Cap piping Vacuum entry female thread)
mounting
Vacuum
ZCUKQ
Rod piping Vacuum Male thread ZP Series
(With pad single unit lock ring)
ZCUKR Vacuum
Pad direct
Rod piping Vacuum
mounting
Specifications
Bore size (mm) ø10 ø16 ø20 ø25 ø32
Fluid Air
Minimum operating pressure 0.13 MPa 0.11 MPa
–101 kPa to 0.6 MPa
Vacuum port pressure
(At vacuum release 0 to 0.6 MPa) Note)
Without auto switch: –10 to +70°C (No freezing)
With auto switch: –10 to +60°C (No freezing)
Lubrication Not required
Cushion Rubber bumper on both sides
+1.0
Stroke allowance 0
Rod tip screw With or without (Pad direct mounting)
Mounting Basic type CUJ
Applicable pad Refer to page 676 for details.
Note) For a cap type, supply pressure only when vacuum is released. That pressure should be less CU
than the cylinder pressure.
Non-rotating Rod Accuracy CQS
(No load/At retraction of the rod at the locking plate side)
Bore size (mm) ø10 ø16 ø20 ø25 ø32 JCQ
Non-rotating rod accuracy ±0.8° ±0.5°
CQ2
Precautions RQ
Be sure to read this before handling the products. CQM
Refer to back page 50 for Safety Instructions and pages 3 to 12 for
Actuator and Auto Switch Precautions. CQU
Caution MU
1. Do not place your finger in the clearance 3. To secure a workpiece to the end of the piston
between the detent plate and the cylinder tube. rod, tighten the workpiece onto the piston rod
Never put your finger between the non-rotating with the piston rod fully retracted so that torque
Moisture plate and cylinder tube. Your finger may be is not applied to the piston rod.
Control Tube pinched when the piston rod retracts. 4. To install a cylinder, tighten it within the torque
If your finger is caught, it could injure your finger values indicated in the table below.
IDK Series because the cylinder outputs a considerable
When operating an actuator with a small diam- amount of force. Proper Tightening Torque
eter and a short stroke at a high frequency, the 2. Make sure that rotational torque is not applied to Bore size Hexagon socket Proper tightening
head bolt diameter
dew condensation (water droplet) may occur
inside the piping depending on the conditions.
the piston rod. If this is unavoidable, operate the
cylinder within the allowable rotational torque listed
(mm) (mm) torque (N·m) D-
Simply connecting the moisture control tube to in the table below. ø10 M3 1.08 ± 10%
the actuator will prevent dew condensation Allowable Rotational Torque ø16 M4 2.45 ± 10% -X
from occurring. For details, refer to the IDK se- ø20, ø25 M5 5.10 ± 10%
Bore size (mm) ø10 ø16 ø20 ø25 ø32 Technical
ries in the Best Pneumatics No. 6. ø32 M6 8.04 ± 10%
Allowable rotational torque (N·m) 0.02 0.04 0.10 0.15 0.20 Data
675
ZCUK Series
Standard Stroke Mounting
Applicable cylinder Double acting type/Single rod type/Non-rotating rod
Stroke (mm) Stroke (mm) Vertical mounting (Body through-hole)
Bore size (mm) 5 10 15 20 25 30 40 50
10 — —
16 — —
20
25
32
Theoretical Output/Double Acting Type Unit: N

Bore size Rod dia. Piston area Operating pressure (MPa)
(mm) (mm) (mm2) 0.3 0.5 0.7
10 4 66.0 19.8 33 46.2
16 6 172 51.6 86 121 Lateral mounting
20 8 264 79.2 132 185 (Body through-
hole)
25 10 412 124 206 289
32 12 691 207 346 484
Minimum Stroke for Mounting Auto Switch

Number of
auto switches D-A9, D-A9V D-M9, D-M9V D-M9W, D-M9WV
1 pc. 5 5 5
2 pcs. 10 5 10
Cylinder/Applicable Pad
In the case of rod end male thread In the case of pad direct mounting
Use ZPT series pad (perpendicular vacuum entry/female thread mounting). Use ZP series pad (single unit).
Cylinder Pad (ZPT02 to 50-B4 to 10) Cylinder Pad (ZP02 to 50)
Bore size Rod dia. (mm) Thread Rod dia. (mm)
Model Model Bore size
(mm) 2 4 6 8 10 13 16 20 25 32 40 50 dia. 2 4 6 8 10 13 16 20 25 32 40 50
10 M4 x 0.7 10 Note 1)
ZCUKC ZCUKD
16 M5 x 0.8 16
ZCUKQ ZCUKR
ZCDUKC 20 M6 x 1.0 20
ZCDUKD
ZCDUKQ 25 M8 x 1.25 ZCDUKR 25
32 M10 x 1.25 32
U
Note) When using “ZC(D)UK R10”, use ZP02 to 08U-X11. Pad shape is
flat only.
Auto Switch Groove
4 x ø4.2
Bore size A B
4x3
10 10.3 13
16 15 18
20 21 23
25 27 25
32 35 27
676
ZCUK Series
Auto Switch Mounting 1
Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height
D-M9
D-M9W
D-M9A
D-A9
D-M9V
D-M9WV
D-M9AV
D-A9V
20 (22) 20 (22)
5.5 (5)

CUJ
(mm)
Bore size D-A9, D-A9V D-M9, D-M9W D-M9V, D-M9WV D-M9A D-M9AV CU
10 12.5 3 –1.5 (1) 16.5 7.5 2.5 16.5 7.5 0.5 16.5 7.5 4.5 16.5 7.5 2.5 CQS
16 16 4 –2 (0.5) 20 8 1.5 20 8 0 20 8 3.5 20 8 2
20 20 6 –4 (–1.5) 24 10 0 24 10 –2 24 10 2 24 10 0 JCQ
25 22.5 7 –5.5 (–3) 26.5 11.5 –1.5 26.5 11.5 –3.5 26.5 11.5 0.5 26.5 11.5 –1.5
32 23.5 8 –6.5 (–4) 27.5 12.5 –2.5 27.5 12.5 –4.5 27.5 12.5 –0.5 27.5 12.5 –2.5 CQ2
auto switches, adjust them after confirming their operation. RQ
Note 2) Negative figures in the table show dimensions mounted inside cylinder body.
Note 3) In the case of 5 mm stroke or the 10 mm stroke, there are times in which the auto switches will not turn OFF or 2 auto switches will turn ON
simultaneously due to their movement range. Therefore, set the position approximately 1 to 4 mm outward from the values given in the table CQM
above. Then, perform an operation inspection to make sure that the auto switches operate normally (if 1 switch is used, make sure that it turns
ON and OFF properly; if 2 auto switches are used, make sure that both switches turn ON).
Note 4) Figures in ( ) in the table W are D-A90 and A93. CQU
MU
Operation Range (mm)
Bore size
Auto switch model
10 16 20 25 32
D-A9, A9V 6 9 11 12.5 14
D-M9, M9V
D-M9W, M9WV 4 5 7 7 7
D-M9A, M9AV
∗ Since this is the average value at a normal temperature including hysteresis (tolerance ±30%), it is
not guaranteed. D-
Figures may change substantially depending upon the surrounding environment.
-X
Technical
Data
677
ZCUK Series
Auto Switch Mounting 2
Mounting of Auto Switch
Cautions on Proximity lnstallation
When free mounting cylinders equipped with auto switches are used,
the auto switches could activate unintentionally if the installed
distance is less than the dimensions shown in the table. Therefore,
make sure to provide a greater clearance. Due to unavoidable
circumstances, if they must be used with less distance than the
dimensions given in the table, the cylinders must be shielded.
Therefore, affix a steel plate or a magnetic shielding plate (MU-S025)
to the area on the cylinder that corresponds to the adjacent auto
switch. (Please contact SMC for details.) Auto switches may
malfunction if a shielding plate is not used. L
Bore size (mm) Mounting pitch L (mm)
10 20
16 33
20 40
25 46
32 56
Shielding plate (MU-S025) dimensions

18

36 The product is attached to the cylinder since the
bottom side is pre-treated with adhesive glue.
Weight
Basic Type/With Auto Switch ( ): Denotes the values with D-A93. Unit: g
Bore size Cylinder stroke (mm)
Model
(mm) 5 10 15 20 25 30 40 50
63 69 75 81 87 93
10 — —
(68) (79) (85) (91) (97) (103)
103 115 127 139 151 163
16 — —
(128) (145) (157) (169) (181) (193)
180 204 228 252 276 300 348 396
ZC(D)UKC 20
(214) (244) (267) (292) (316) (340) (388) (436)
304 343 382 421 460 499 577 655
25
(358) (402) (441) (480) (519) (558) (636) (714)
514 574 634 694 754 814 934 1054
32
(587) (652) (712) (772) (832) (892) (1012) (1132)
49 53 57 61 65 69
10 — —
(54) (63) (67) (71) (75) (79)
79 86 93 100 107 114
16 — —
(104) (116) (123) (130) (137) (144)
145 159 173 187 201 215 243 271
ZC(D)UKQ 20
(179) (198) (212) (226) (240) (254) (282) (310)
259 279 299 319 339 359 399 439
25
(313) (338) (358) (378) (398) (418) (458) (498)
421 451 481 511 541 571 631 691
32
(494) (529) (559) (589) (619) (649) (709) (769)
Besides the models listed in How to Order, the following auto switches are applicable.
∗ For solid state switches, auto switches with a pre-wired connector are also available. Refer to pages 1648 and 1649 for details.
∗ Normally closed (NC = b contact), solid state switch (D-F9G/F9H type) are also available. Refer to page 1593 for details.
678
Construction
Cap piping/Male thread: ZC(D)UKC
ø10
With auto switch
Pad direct
mounting
Section AA In the case of
ZC(D)UKD
ø16 to ø32
With auto switch
Pad direct
mounting
In the case of
Section AA ZC(D)UKD
CUJ
No. Description Material Note
No.
1
Description
Cylinder tubing
Material
Aluminum alloy
Note
Hard anodized 13 Bumper Urethane
CU
2 Rod cover B Aluminum alloy Chromated 14 Magnet —
3 Cap Aluminum alloy Anodized 15 Auto switch — CQS
4 Piston Aluminum alloy Chromated 16 Rod end nut Carbon steel Chromated
5 Piston rod Stainless steel 17 Piston gasket NBR JCQ
6 Bush Bearing alloy 18∗ Piston seal
19∗
7 Plate Aluminum alloy Nickel plated
20∗
Rod seal
Gasket
NBR CQ2
8 Guide rod Stainless steel
9 Bush Bearing alloy 21∗ Gasket for cap
10 Hexagon socket head cap screw Carbon steel Chromated 22 Seal washer Rolled steel/NBR RQ
11 Hexagon socket set screw Carbon steel Chromated
12 Hexagon socket head cap screw Carbon steel Nickel plated CQM
Replacement Parts: Seal Kit CQU
Cap piping
Bore size / Part no. MU
Kit no. ø10 ø16 ø20 ø25 ø32
ZCU10-PS ZCU16-PS ZCU20-PS ZCU25-PS ZCU32-PS
∗ Seal kit includes !8, !9, @0 and @1. Order the seal kit based on each bore size.
Grease pack part no.: GR-S-010 (10 g)
D-
-X
Technical
Data
679
ZCUK Series
Construction
Rod piping-Male thread: ZC(D)UKQ

ø10
With auto switch
Pad direct
Section AA mounting
In the case of
ZC(D)UKR
ø16 to ø32
With auto switch
Pad direct
mounting
Section AA In the case of
ZC(D)UKR

1 Cylinder tubing Aluminum alloy Hard anodized 13 Bumper Urethane
2 Rod cover B Aluminum alloy Chromated 14 Magnet —
3 Rod cover retainer plate Aluminum alloy Anodized 15 Auto switch —
4 Piston Aluminum alloy Chromated 16 Rod end nut Carbon steel Chromated
5 Piston rod Stainless steel 17 Piston gasket NBR
6 Bush Bearing alloy 18 Socket Carbon steel ø16 only
7 Plate Aluminum alloy Nickel plated 19 Gasket ø16 only
8 Guide rod Stainless steel 20∗ Piston seal
NBR
9 Bush Bearing alloy 21∗ Rod seal
10 Hexagon socket head cap screw Carbon steel Chromated 22∗ Gasket
11 Hexagon socket set screw Carbon steel Chromated 23 Seal washer Rolled steel/NBR
12 Hexagon socket head cap screw Carbon steel Nickel plated

Rod piping
Bore size / Part no.
Kit no. ø10 ø16 ø20 ø25 ø32
CUW10D-PS CUW16D-PS CUW20D-PS CUW25D-PS CUW32D-PS
∗ Seal kit includes @0, @1 and @2. Order the seal kit based on each bore size.
Grease pack part no.: GR-S-010 (10 g)
680
Vacuum Piping: Cap Piping/Rod End Shape: Male Thread
ZC(D)UKC Cylinder bore Stroke D
2 x ø3.2
ø10 Seal washer through Port size
2 x M5 x 0.8
30 + Stroke
Vacuum port size

ø1.5 through
2 x ø3.2 through
4 x ø6 depth 5 counterbore
36 + Stroke 20 + Stroke
77 + 2 x Stroke
ø16 to ø32 Port size

2 x øP through 2 x M5 x 0.8 (ø32: 2 x 1/8)
Seal washer
GC + Stroke
Vacuum port size
CUJ
ød Through
CU
Width across
flats L
2 x øP through
CQS
4 x øT counterbore
S + Stroke SA + Stroke JCQ
Z + 2 x Stroke
CQ2
RQ
Model
Port size Stroke range
(mm)
A A' B C ød øD E F FK FL FY GA GC CQM
Air port Vacuum port
ZC(D)UKC16 M5 x 0.8 M5 x 0.8 5 to 30 11 12.5 20 32 2 6 7 8 13 17 28 16.5 Note 1) 31
ZC(D)UKC20 M5 x 0.8 1/8 5 to 50 12 14 26 40 3 8 9 8 16 20 33 19 33.5
CQU
ZC(D)UKC25 M5 x 0.8 1/8 5 to 50 15.5 18 32 50 4 10 10 10 20 22 43.5 21.5 34
ZC(D)UKC32 1/8 1/8 5 to 50 19.5 22 40 62 5 12 11 12 24 29 51.5 23 34.5 MU
Model H J L MM øP Q QA R S SA øT Y Z
ZC(D)UKC16 26 14 5 M5 x 0.8 4.5 4 2 12 30 (40) 19.5 7.6 depth 6.5 15.5 75.5 (85.5)
ZC(D)UKC20 29 16 6 M6 x 1.0 5.5 9 4.5 16 36 (46) 21 9.3 depth 9 19.5 86 (96)
ZC(D)UKC25 33 20 8 M8 x 1.25 5.5 9 4.5 20 40 (50) 21 9.3 depth 8 24.5 94 (104)
ZC(D)UKC32 42 24 10 M10 x 1.25 6.6 13.5 4.5 24 42 (52) 22 11 depth 11.5 30.5 106 (116)
( ): In the case of a mounted auto switch. Note 1) In the case of ZCUKC16-5D: 14.5 mm.
D-
-X
Technical
Data
681
ZCUK Series
Vacuum Piping: Cap Piping/Rod End Shape: Pad Direct Mounting
ZC(D)UKD Cylinder bore Stroke D
ø10
Pad for ZCUKD10 2 x ø3.2 through Port size
(ZP02 to 08U∗-X11) 2 x M5 x 0.8
30 + Stroke
ø1.5 Through Vacuum port size
2 x ø3.2 through
77 + 2 x (Stroke)
ø16 to ø32 Port size

2 x øP through 2 x M5 x 0.8 (ø32: 1/8)
Use ZP series pad. GC + Stroke

Vacuum port size
ød Through
Width across
flats L
2 x øP through
4 x øT counterbore
S + Stroke SA + Stroke
Z + 2 x Stroke

Model
(mm)
øA A' B C ød øD E F FK FL FY GA GC
ZC(D)UKD16 M5 x 0.8 M5 x 0.8 5 to 30 5 7 20 32 2 6 7 8 13 17 28 16.5 Note 1) 31
ZC(D)UKD20 M5 x 0.8 1/8 5 to 50 6.6 8 26 40 3 8 9 8 16 20 33 19 33.5
ZC(D)UKD25 M5 x 0.8 1/8 5 to 50 8 9 32 50 4 10 10 10 20 22 43.5 21.5 34
ZC(D)UKD32 1/8 1/8 5 to 50 11.5 10.5 40 62 5 12 11 12 24 29 51.5 23 34.5
Model H J L øP Q QA R S SA øT W Y Z
ZC(D)UKD16 26 14 5 4.5 4 2 12 30 (40) 19.5 7.6 depth 6.5 3.5 15.5 75.5 (85.5)
ZC(D)UKD20 29 16 6 5.5 9 4.5 16 36 (46) 21 9.3 depth 8 5 19.5 86 (96)
ZC(D)UKD25 33 20 8 5.5 9 4.5 20 40 (50) 21 9.3 depth 9 5 24.5 94 (104)
ZC(D)UKD32 42 24 10 6.6 13.5 4.5 24 42 (52) 22 11 depth 11.5 5 30.5 106 (116)
( ): In the case of a mounted auto switch. Note 1) In the case of ZCUKD16-5D: 14.5 mm.
682
Vacuum Piping: Rod Piping/Rod End Shape: Male Thread
ZC(D)UKQ Cylinder bore Stroke D
ø10 Seal washer 2 x ø3.2 through Port size ø4/ø2.5 Urethane tube (TU0425) or
2 x M5 x 0.8 Soft nylon tube (TS0425)
ø1.5 through
2 x ø3.2 through
70 + 2 x Stroke
Port size
ø16 to ø32
2 x øP through 2 x M5 x 0.8 (ø32: 2 x 1/8)
Seal washer
Vacuum port size

Socket (Only ø16) CUJ
ød through
Hexagon width
across flats 8 CU
Width across
flats L
2 x øP through CQS
4 x øT counterbore HA +
Stroke
S + Stroke
Z + 2 x Stroke JCQ
CQ2
RQ
Model
(mm)
A A' B C ød øD E F FK FL FY GA GC CQM
ZC(D)UKQ16 M5 x 0.8 M5 x 0.8 Note 2) 5 to 30 11 12.5 20 32 2 6 7 8 13 17 28 16.5 Note 1) 19
ZC(D)UKQ20 M5 x 0.8 M5 x 0.8 5 to 50 12 14 26 40 3 8 9 8 16 20 33 19 21.5 CQU
ZC(D)UKQ25 M5 x 0.8 M5 x 0.8 5 to 50 15.5 18 32 50 4 10 10 10 20 22 43.5 21.5 22
ZC(D)UKQ32 1/8 1/8 5 to 50 19.5 22 40 62 5 12 11 12 24 29 51.5 23 22.5 MU
Model H HA J L MM øP Q QA R S SA øT Y Z
ZC(D)UKQ16 26 5 14 5 M5 x 0.8 4.5 4 2 12 30 (40) 7.5 7.6 depth 6.5 15.5 68.5 (78.5)
ZC(D)UKQ20 29 5 16 6 M6 x 1.0 5.5 9 4.5 16 36 (46) 9 9.3 depth 8 19.5 79 (89)
ZC(D)UKQ25 33 5 20 8 M8 x 1.25 5.5 9 4.5 20 40 (50) 9 9.3 depth 9 24.5 87 (97)
ZC(D)UKQ32 42 5 24 10 M10 x 1.25 6.6 13.5 4.5 24 42 (52) 10 11 depth 11.5 30.5 99 (109)
( ): In the case of a mounted auto switch. Note 1) In the case of ZCUKQ16-5D: 14.5 mm. Note 2) In the case of socket equipped type.
D-
-X
Technical
Data
683
ZCUK Series
Vacuum Piping: Rod Piping/Rod End Shape: Pad Direct Mounting
ZC(D)UKR Cylinder bore Stroke D
Pad for ZCUKR10

ø10 (ZP02 to 08U∗-X11) 2 x ø3.2 through Port size ø4/ø2.5 Urethane tube (TU0425) or
2 x M5 x 0.8 Soft nylon tube (TS0425)
12
ø1.5 through
2 x ø3.2 through
70 + 2 x Stroke
Port size
ø16 to ø32 2 x M5 x 0.8 (ø32: 2 x 1/8)
2 x øP through
Use ZP series pad.
Vacuum port size

Socket (Only ø16)
ød through
Hexagon width across flats 8

Width across
flats L
2 x øP through
4 x øT counterbore HA +
S + Stroke Stroke
Z + 2 x Stroke

Model
(mm)
øA A B C ød øD E F FK FL FY GA GC
ZC(D)UKR16 M5 x 0.8 M5 x 0.8 Note 2) 5 to 30 5 7 20 32 2 6 7 8 13 17 28 16.5 Note 1) 19
ZC(D)UKR20 M5 x 0.8 M5 x 0.8 5 to 50 6.6 8 26 40 3 8 9 8 16 20 33 19 21.5
ZC(D)UKR25 M5 x 0.8 M5 x 0.8 5 to 50 8 9 32 50 4 10 10 10 20 22 43.5 21.5 22
ZC(D)UKR32 1/8 1/8 5 to 50 11.5 10.5 40 62 5 12 11 12 24 29 51.5 23 22.5
Model H HA J L øP Q QA R S SA øT W Y Z
ZC(D)UKR16 26 5 14 5 4.5 4 2 12 30 (40) 7.5 7.6 depth 6.5 3.5 15.5 68.5 (78.5)
ZC(D)UKR20 29 5 16 6 5.5 9 4.5 16 36 (46) 9 9.3 depth 8 5 19.5 79 (89)
ZC(D)UKR25 33 5 20 8 5.5 9 4.5 20 40 (50) 9 9.3 depth 9 5 24.5 87 (97)
ZC(D)UKR32 42 5 24 10 6.6 13.5 4.5 24 42 (52) 10 11 depth 11.5 5 30.5 99 (109)
( ): In the case of a mounted auto switch. Note 1) In the case of ZCUKQ16-5D: 14.5 mm. Note 2) In the case of socket equipped type.
684
Dimensions of Pad Mounted Model

Rod end shape: Male thread
Tubing bore: ø10 Tubing bore: ø16 to ø32
Flat/Flat with ribs Deep Bellows Applicable

Model
Dia.(mm) 2 4 6 8 10 13 16 20 25 32 40 50 10 16 25 40 6 8 10 13 16 20 25 32 40 50 pad model
øDQ 2. 6 4. 8 7 9 — — — — — — — — — — — — 7 9 — — — — — — — —
ZC(D)UKC10
HQ 19. 5 19. 5 19. 5 19. 5 — — — — — — — — — — — — 20. 5 20. 5 — — — — — — — — ZPT-B4
ZC(D)UKQ10
HP 36. 5 36. 5 36. 5 36. 5 — — — — — — — — — — — — 37. 5 37. 5 — — — — — — — —
øDQ 2. 6 4. 8 7 9 12 15 18 — — — — — 12 18 — — 7 9 12 15 18 — — — — —
ZC(D)UKC16
HQ 19. 5 19. 5 19. 5 19. 5 21 21 21. 5 — — — — — 24 25 — — 20. 5 20. 5 25 27. 5 29 — — — — — ZPT-B5
ZC(D)UKQ16
HP 41. 5 41. 5 41. 5 41. 5 44 42 42. 5 — — — — — 45 46 — — 42. 5 42. 5 46 48. 5 50 — — — — —
øDQ — — — — 12 15 18 23 28 35 — — 12 18 28 — — — 12 15 18 22 27 34 — —
ZC(D)UKC20
HQ — — — — 21 21 21. 5 23 23 23. 5 — — 24 25 29 — — — 25 27. 5 29 32. 5 33 38 — — ZPT-B6
ZC(D)UKQ20
HP — — — — 44 44 44. 5 46 46 46. 5 — — 47 48 52 — — — 48 50. 5 52 55. 5 56 61 — —
øDQ — — — — — — — 23 28 35 43 53 — — 28 43 — — — — — 22 27 34 43 53
ZC(D)UKC25
HQ — — — — — — — 29 29 29. 5 32 33 — — 35 42. 5 — — — — — 38. 5 39 44 47. 5 51. 5 ZPT-B8
ZC(D)UKQ25
HP — — — — — — — 54 54 54. 5 57 58 — — 60 67. 5 — — — — — 63. 5 64 69 72. 5 76. 5
øDQ — — — — — — — 23 28 35 43 53 — — 28 43 — — — — — 22 27 34 43 53
ZC(D)UKC32
HQ — — — — — — — 32 32 32. 5 35 36 — — 38 45. 5 — — — — — 41. 5 42 47 50. 5 54. 5 ZPT-B10
ZC(D)UKQ32
HP — — — — — — — 64 64 64. 5 67 68 — — 70 77. 5 — — — — — 73. 5 74 79 82. 5 86. 5
Rod end shape: Pad direct mounting

Tubing bore: ø10 Tubing bore: ø16 to ø32
Flat/Flat with ribs Deep Bellows Applicable

Model
Dia.(mm) 2 4 6 8 10 13 16 20 25 32 40 50 10 16 25 40 6 8 10 13 16 20 25 32 40 50 pad model
øDQ 2. 6 4. 8 7 9 — — — — — — — — — — — — — — — — — — — — — — Note)
ZC(D)UKD10
ZC(D)UKR10
HQ
HP
10
26
10
26
10 10 — — —
26 26 — — —
—
—
—
—
— — —
— — —
—
—
— —
— —
—
—
—
—
—
—
—
—
—
—
— —
— —
—
—
—
—
— —
— —
ZPU-X11
CUJ
øDQ 2. 6 4. 8 7 9 — — — — — — — — — — — — 7 9 — — — — — — — —
ZC(D)UKD16
HQ 12 12 12 12 — — — — — — — — — — — — 13 13 — — — — — — — — ZP CU
ZC(D)UKR16
HP 31 31 31 31 — — — — — — — — — — — — 32 32 — — — — — — — —
ZC(D)UKD20
øDQ — — — — 12 15 18 — — — — — 12 18 — — — — 12 15 18 — — — — — CQS
HQ — — — — 12 12 12. 5 — — — — — 15 16 — — — — 16 18. 5 20 — — — — — ZP
ZC(D)UKR20
HP — — — — 33 33 33. 5 — — — — — 36 37 — — — — 37 39. 5 41 — — — — — JCQ
øDQ — — — — — — — 23 28 35 — — — — 28 — — — — — — 22 27 34 — —
ZC(D)UKD25
HQ — — — — — — — 14 14 14. 5 — — — — 20 — — — — — — 23. 5 24 29 — — ZP
ZC(D)UKR25
HP — — — — — — — 38 38 38. 5 — — — — 44 — — — — — — 47. 5 48 53 — —
CQ2
øDQ — — — — — — — — — — 43 53 — — — 43 — — — — — — — — 43 53
ZC(D)UKD32
ZC(D)UKR32
HQ — — — — — — — — — — 18. 5 19. 5 — — — 29 — — — — — — — — 34 38 ZP RQ
HP — — — — — — — — — — 50 51 — — — 60. 5 — — — — — — — — 65. 5 69. 5
Note) ZPU-X11: Flat type only. CQM
Accessory Dimensions (Attached only to a rod end male thread type.) CQU
Rod end nut Seal washer
Core sheet MU
Seal
Material: Core sheet — Rolled steel
Material: Carbon steel Seal — NBR
Part no. Applicable cylinder bore (mm) d H B C D Part no. Applicable cylinder bore (mm) t D
NTP-010 10 M4 x 0.7 2.4 7 8.1 6.8 WCS4 x 0.7 10 1.2 11.5
D-
NTJ-015A 16 M5 x 0.8 4 8 9.2 7.8 WCS5 x 0.8 16 1.2 12.5
NT-015A 20 M6 x 1.0 5 10 11. 5 9.8 WCS6 x 1 20 1.2 14.0 -X
NT-02 25 M8 x 1.25 5 13 15. 0 12. 5 WCS8 x 1 25 1.6 15.5
NT-03 WCS10 x 1
Technical
32 M10 x 1.25 6 17 19. 6 16. 5 32 1.6 18.0
Data
685

Series: A Space-Saving Air Cylinder With Multiple Surfaces Capable of Mounting Directly. Offered in Rich Variations

Uploaded by

Copyright:

Available Formats

Series: A Space-Saving Air Cylinder With Multiple Surfaces Capable of Mounting Directly. Offered in Rich Variations

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Series: A Space-Saving Air Cylinder With Multiple Surfaces Capable of Mounting Directly. Offered in Rich Variations

Uploaded by

Copyright:

Available Formats

Free Mount Cylinder

A space-saving air cylinder with multiple surfaces capable of mounting

With air cushion

Standard Series CU CUK

25A- Copper (Cu) and zinc (Zn)-free Note 3) ø10 to ø32      

20- Copper Note 2) and Fluorine-free ø6 to ø32      

XB6 Heat-resistant cylinder (–10 to 150 °C) 

XB7 Cold-resistant cylinder (– 40 to 70 °C) 

XB9 Low-speed cylinder (10 to 50 mm/s) Note 1) 

XB13 Low-speed cylinder (5 to 50 mm/s) Note 1) ø6 to ø32 

XC19 Intermediate stroke (5 mm spacer) 

XC22 Fluororubber seals 

XC34 Rod not extending beyond non-rotating plate — — — 

Note 1) Refer to Best Pneumatics No. 2-3 for low-speed cylinders.

CU CUK CU-A ZCUK CUX

ø6 to ø32 ø20 to ø32 ø10 to ø32

Precautions on Free Mount

Maximum speed (mm/s)

2. Rod end allowable lateral load

Non-rotating Rod Type Non-rotating Rod Type

With auto switch CDU 6 30 D M9BW

Number of auto switches

Built-in Magnet Cylinder Model

Electrical Wiring Pre-wired

Theoretical Output (N)

176 193 210 227 244 261 295 329

CU X Mounting bracket Bore size Stroke

Smooth operation with a little sticking and slipping at low speed.

Minimum Operating Pressure

ø6 With auto switch

Component Parts Component Parts

Replacement Parts: Seal Kit

Rod End Nut/Accessory

( ): Denotes the values of D-A96.

( ): Denotes the values of D-A9V.

Minimum Stroke for Auto Switch Mounting

No. of auto Applicable auto switch

Auto Switch Groove Position

Caution on Proximity Installation CUJ

With auto switch CDUW 6 30 D M9BW

Port thread type

Type Special function Electrical Wiring Pre-wired

3-wire (NPN) M9NWV M9NW      IC

Theoretical Output (N)

Weight /( ): Denotes the values with D-A93. (g)

ø6 With auto switch

Component Parts Component Parts

Replacement Parts: Seal Kit

Rod End Nut/Accessory

( ): Denotes the values of D-A96.

( ): Denotes the values of D-A9V.

Operating Range Minimum Stroke for Auto Switch Mounting

With auto switch CDU 10 15 S M9BW

Number of auto switches

Electrical Wiring Pre-wired

3-wire (NPN) M9NWV M9NW      IC

Rubber bumper Theoretical Output (N)

Weight /( ): Denotes the values with D-A93. (g)

Component Parts Component Parts