Compact Cylinder/Guide Rod Type

CQM Series
ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Lateral load
resisting
2 to 4 times
∗ Compared to compact
cylinder the CQ series

Non-rotating
accuracy
± 0.2° or less
Refer to page 1008

Guide Rod for details.

CUJ
CU
External dimensions Slide bearing CQS
Load can be directly JCQ
mounted.
CQ2
RQ
Mounting dimensions
compatible with CQM
the CQS, CQ2 series.
CQ2series CQU
Auto switch is mountable/removable even when
the plate is retracted.
MU
Series Variations

Bore size Standard stroke (mm)

Series Cushion
(mm) 5 10 15 20 25 30 35 40 45 50 75 100

12, 16
20, 25 Rubber D-
CQM bumper
32, 40 -X
50, 63, 80, 100 Technical
Data
1005
 Compact Cylinder: Guide Rod Type

CQM Series
ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
How to Order

CQM B 20 15
With auto switch CDQM B 20 15 M9BW
With auto switch Number of auto switches
(Built-in magnet) Nil 2 pcs.
S 1 pc.
Mounting bracket
n “n” pcs.
B Through-hole (Standard)
A Both ends tapped (ø32 to ø100) Auto switch type
Note 1) Cylinder bodies of ø12 to ø25 are
Nil Without auto switch
common for both B (through hole) and
A (both ends tapped) types. Symbol to ∗ Refer to the table below for the
order is unified to “B” for those sizes. applicable auto switch model.
Note 2) Cylinder mounting bolts are not
included. Order them separately Cylinder stroke (mm)
referring to Mounting Bolts for CQM on
pages 1010 and 1011.
Refer to page 1007 for standard and
Note 3) Contact SMC for the other mounting intermediate strokes.
types.
Thread type
Bore size Nil
M thread ø12 to ø25
12 12 mm 40 40 mm Rc
16 16 mm 50 50 mm TN NPT ø32 to ø100 Built-in Magnet Cylinder Model
20 20 mm 63 63 mm TF G If a built-in magnet cylinder without an
25 25 mm 80 80 mm Note) M thread to be used for without auto switch is required, there is no need
32 32 mm 100 100 mm auto switch type of ø32, 5 stroke to enter the symbol for the auto switch.
exceptionally. There is no need to (Example) CDQMB32-10
enter the symbol when ordering.

Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches.
Load voltage Auto switch model Lead wire length (m)
Indicator light

Electrical Wiring Pre-wired

Type Special function Perpendicular In-line 0.5 1 3 5 None connector Applicable load
Applicable Auto Switch
entry /Refer to
(Output)
pages 1263 toDC AC information on auto switches.
1371 for further
ø12 to ø25 ø32 to ø100 ø12 to ø25 ø32 to ø100 (Nil) (M) (L) (Z) (N)
3-wire (NPN) 5 V, M9NV M9N
IC circuit
Grommet 3-wire (PNP) 12 V M9PV M9P
—
M9BV M9B
Solid state auto switch

2-wire 12 V —
Connector — J79C —
3-wire (NPN) 5 V, M9NWV M9NW
Diagnostic indication IC circuit
(2-color indicator)
3-wire (PNP) 12 V M9PWV M9PW Relay,
Yes 24 V —
2-wire 12 V M9BWV M9BW — PLC
3-wire (NPN) 5 V, M9NAV∗1 M9NA∗1
Water resistance Grommet IC circuit
(2-color indicator) 3-wire (PNP) 12 V M9PAV∗1 M9PA∗1
2-wire 12 V M9BAV∗1 M9BA∗1 —
With diagnostic output (2-color indicator) 4-wire 5 V,12 V — — F79F IC circuit
Magnetic field resistant (2-color indicator) 2-wire (Non-polar) — — — P4DW∗∗ —
3-wire
(NPN equiv.) —
5V — A96V A96 IC circuit —
Reed auto switch

Yes
Grommet — 200 V — A72 — A72H
—
— 12 V 100 V A93V∗2 A93
No 5 V,12 V 100 V or less A90V A90 IC circuit Relay,
2-wire
Yes 24 V 12 V — — A73C — — PLC
Connector
No 5 V,12 V 24 V or less — A80C — IC circuit
With diagnostic output (2-color indicator) Grommet Yes — — — A79W — —
∗1 Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance.
Consult with SMC regarding water resistant types with the above model numbers.
∗2 1 m type lead wire is only applicable to D-A93.

∗ Lead wire length symbols: 0.5 m·········· Nil (Example) M9NW ∗ Solid state auto switches marked with a "" are produced upon receipt of order.
1 m·········· M (Example) M9NWM ∗∗ D-P4DWL type is compatible with bore sizes ø40 to ø100.
3 m·········· L (Example) M9NWL ∗ Only D-P4DW type is assembled when shipped.
5 m·········· Z (Example) M9NWZ
None·········· N (Example) J79CN
∗ Besides the models in the above catalog, there are some other auto switches that are applicable. For more information, refer to page 1017.
∗ Refer to pages 1648 and 1649 for the details of auto switches with a pre-wired connector.
∗ When mounting D-A9(V)/M9(V)/M9W(V)/M9A(V) types on a side other than the port side with ø32 to ø50 cylinders, order auto switch mounting brackets separately. Refer
to page 1017 for details.
1006
 Compact Cylinder: Guide Rod Type CQM Series

Specifications
Bore size (mm) 12 16 20 25 32 40 50 63 80 100
Model Pneumatic (non-lube) type
Action Double acting, Single rod
Fluid Air
Proof pressure 1.5 MPa
Maximum operating pressure 1.0 MPa
Minimum operating pressure 0.12 MPa 0.1 MPa
Ambient and fluid Without auto switch: –10°C to 70°C (No freezing)
temperature With auto switch: –10°C to 60°C (No freezing)
Cushion Rubber bumper on both ends
+1.0 mm∗
Stroke length tolerance
0
Mounting Through-holes
Piston speed 50 to 500 mm/s 50 to 300 mm/s

Caution ∗ Stroke length tolerance does not include the amount of dumper change.

Do not use the product as a stopper. Standard Stroke

Do not disassemble and modify the product.
Bore size (mm) Standard stroke (mm)
12,16 5, 10, 15, 20, 25, 30
20,25 5, 10, 15, 20, 25, 30, 35, 40, 45, 50
Symbol 32,40 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100
Rubber bumper 50,63,80,100 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100

Manufacture of Intermediate Stroke

Description Intermediate stroke range
Spacers are installed in a Bore size (mm) Intermediate stroke range (mm)
cylinder with standard stroke. 12, 16 1 to 29
Bore size (mm) Description 20, 25 1 to 49
12 to 32 Available in 1 mm stroke increments 32 1 to 99
40 to 100 Available in 5 mm stroke increments 40 to 100 5 to 95
Example) Part number: CQMB32–57
Theoretical Output Constructed by installing an 18 mm spacer in the standard stroke cylinder CQMB32-75. B dimension: 108 mm.

Unit: N Weight CUJ

Bore size Operating Operating pressure (MPa)
(mm) direction
Without Auto Switch Unit: g
0.3 0.5 0.7
Bore size Cylinder stroke (mm) CU
IN 25 42 59
12 (mm) 5 10 15 20 25 30 35 40 45 50 75 100
OUT 34 57 79
12 44 52 60 69 77 86 – – – – – – CQS
IN 45 75 106
16 16 56 67 77 87 97 108 – – – – – –
OUT 60 101 141
20 92 107 122 137 152 167 183 198 213 227 – – JCQ
IN 71 118 165
20 25 125 143 162 180 198 216 234 252 270 288 – –
OUT 94 157 220
32 182 205 228 250 274 297 320 343 366 389 0553 0669 CQ2
IN 113 189 264
25 40 269 295 320 345 370 396 421 446 471 497 0692 0823
OUT 147 245 344
50 – 500 540 580 620 661 701 740 780 821 1133 1341 RQ
IN 181 302 422
32 63 – 745 795 845 894 944 993 1043 1093 1143 1535 1791
OUT 241 402 563
80 – 1400 1479 1559 1639 1719 1800 1880 1959 2039 2671 3067 CQM
IN 317 528 739
40 100 – 2365 2468 2571 2674 2776 2880 2983 3086 3188 4053 4574
OUT 377 628 880 CQU
IN 495 825 1150 With Auto Switch (Built-in magnet) Unit: g
50
OUT 589 982 1370 Bore size
(mm)
Cylinder stroke (mm)
MU
IN 840 1400 1960 5 10 15 20 25 30 35 40 45 50 75 100
63
OUT 936 1560 2184 12 52 59 68 77 84 93 – – – – – –
IN 1362 2270 3178 16 66 77 87 97 107 118 – – – – – –
80
OUT 1509 2515 3521 20 122 138 153 168 182 197 213 227 242 257 – –
IN 2145 3575 5005 25 168 186 205 223 240 258 277 295 313 331 – –
100
OUT 2355 3925 5495 32 241 264 287 309 333 356 379 401 425 448 0564 0680
40 345 371 396 421 447 473 498 523 548 574 0705 0836
Auto Switch Mounting Bracket Weight 50 – 618 658 698 738 779 819 858 898 939 1147 1355
D-
63 – 903 953 1003 1052 1102 1152 1201 1251 1301 1557 1813
Mounting Applicable cylinder Weight
bracket part no. bore size (g) 80 – 1661 1740 1820 1900 1980 2061 2141 2220 2300 2695 3090
-X
BQ-2 ø32 to ø100 1.5
100 – 2745 2848 2950 3053 3156 3260 3362 3465 3568 4088 4609
Add each weight of auto switches and mounting brackets. Technical
BQP1-050 ø40 to ø100 16
Refer to pages 1575 to 1701 for auto switch weight. Data
1007
CQM Series

Plate Non-rotating Accuracy

Non-rotating accuracy without load is designed to be same or less than the figures shown in the table below at the retracted cylinder end (plate).

Bore size (mm) Non-rotating accuracy

12, 16 +θ
±0.2°
20 to 100 ±0.1° –θ

Plate Allowable Rotational Torque

Make sure to operate strictly within the allowable rotation T
torque range to the plate.
Operation outside of this range may result in shorter service life or
damage to the devise.
T

Unit: N.m

Bore size Cylinder stroke (mm)

(mm) 5 10 15 20 25 30 35 40 45 50 75 100
12 0.11 0.10 0.08 0.07 0.07 0.06 – – – – – –
16 0.15 0.12 0.11 0.10 0.09 0.08 – – – – – –
20 0.37 0.32 0.28 0.25 0.23 0.21 0.19 0.18 0.17 0.16 – –
25 0.40 0.35 0.31 0.28 0.25 0.23 0.21 0.20 0.18 0.17 – –
32 0.66 0.59 0.53 0.49 0.45 0.42 0.39 0.36 0.34 0.32 0.25 0.20
40 1.06 0.96 0.88 0.81 0.75 0.70 0.65 0.61 0.58 0.55 0.43 0.36
50 – 1.70 1.56 1.45 1.35 1.26 1.19 1.12 1.06 1.01 0.80 0.67
63 – 3.90 3.62 3.37 3.15 2.96 2.80 2.65 2.51 2.39 1.92 1.61
80 – 7.44 6.98 6.56 6.20 5.87 5.57 5.31 5.07 4.84 3.98 3.37
100 – 11.85 11.19 10.61 10.08 9.60 9.17 8.77 8.41 8.07 6.73 5.77

Plate Allowable Lateral Load Allowable Kinetic Energy

Make sure to operate strictly within the allowable lateral load Make sure to operate strictly within the allowable range of
range to the plate. the load mass and maximum speed.
Operation outside of this range may result in shorter service life or Operation outside of this range may cause excessive impact, which may
damage to the devise. result in the damage to the devise.
Lateral load Operating pressure: 0.5 MPa
500.0

100.0 ø100
Stroke Eccentric distance
ø80
ø63
ø50
Load mass (kg)

10.0
ø4
0
ø100 ø3
100 2
Plate allowable lateral load (N)

ø2
ø80 5
ø2
1.0 0
ø63 ø1
6
ø1
2
ø50
0.1
ø40 50 100 200 300 500
ø32 Maximum piston speed (mm/s)
10
ø20, ø25

ø12, ø16

0 10 20 30 40 50 60 70 80 90 100 110 120

Stroke + Eccentric distance (mm)

1008
 Compact Cylinder: Guide Rod Type CQM Series

Construction

ø12 to ø25
With auto switch
o t !5 !1 w !7 !2 q r !6 e !3 (Built-in magnet) !4

!0 u y

ø32 to ø100
With auto switch
o t !5 !1 w !7 !2 r q !6 e !3 (Built-in magnet) !4

CUJ
CU
!0 u y
CQS
JCQ
ø50 to ø100
Component Parts CQ2
No. Description Material Note
i 1 Cylinder tube Aluminum alloy Hard anodized RQ
Aluminum alloy ø12 to ø40 Anodized
2 Collar
Aluminum alloy casted ø50 to ø100 Chromated, Coated CQM
3 Piston Aluminum alloy
Stainless steel ø12 to ø25 CQU
4 Piston rod
Carbon steel ø32 to ø100 Hard chrome plated
5 Plate Aluminum alloy Anodized MU
6 Guide rod Stainless steel
7 Bushing Bearing alloy
8 Bushing Bearing alloy ø50 to ø100
9 Hexagon socket head cap screw Carbon steel Zmc chromated
10 Hexagon socket head cap screw Carbon steel Zmc chromated
11 Retaining ring Carbon tool steel Phosphate coated
12 Bumper A Urethan
13 Bumper B Urethan D-
14 Magnet —
15 Rod seal NBR -X
16 Piston seal NBR Technical
17 Gasket NBR Data
1009
CQM Series

Mounting Bolt

Mounting method: Mounting bolt for through-hole Mounting

type of C(D)MB is available as an bolt OA thread
option.
Refer to the following for ordering procedures.
Order the actual number of bolts that will be used.
Example) CQ-M3x25L 2 pcs.
Material: Chromium molybdenum steel
Surface treatment: Zinc chromated Note) To install a cylinder with bore size 12 to 25 mm with through-hole,
be sure to use the attached flat washer.

Mounting Bolt for CQM/Without Auto Switch

Cylinder model C D Mounting bolt part no. Cylinder model C D Mounting bolt part no. C
Cylinder model D Mounting bolt part no.
CQMB12- 5 25 CQ-M3 x 25L CQMB32- 5 30 CQ-M5 x 30L CQMB63- 10 50 CQ-M8 x 50L
-10 30 x 30L - 10 35 x 35L - 15 55 x 55L
-15 35 x 35L - 15 40 x 40L - 20 60 x 60L
6.5
-20 40 x 40L - 20 45 x 45L - 25 65 x 65L
-25 45 x 45L - 25 50 x 50L - 30 70 x 70L
-30 50 x 50L - 30 55 x 55L - 35 14.5 75 x 75L
9
CQMB16- 5 25 CQ-M3 x 25L - 35 60 x 60L - 40 80 x 80L
-10 30 x 30L - 40 65 x 65L - 45 85 x 85L
-15 35 x 35L - 45 70 x 70L - 50 90 x 90L
6.5
-20 40 x 40L - 50 75 x 75L - 75 125 x 125L
-25 45 x 45L - 75 110 x 110L -100 150 x 150L
-30 50 x 50L -100 135 x 135L CQMB80- 10 55 CQ-M10 x 55L
CQMB20- 5 25 CQ-M5 x 25L CQMB40- 5 35 CQ-M5 x 35L - 15 60 x 60L
-10 30 x 30L - 10 40 x 40L - 20 65 x 65L
-15 35 x 35L - 15 45 x 45L - 25 70 x 70L
-20 40 x 40L - 20 50 x 50L - 30 75 x 75L
-25 45 x 45L - 25 55 x 55L - 35 15 80 x 80L
6.5
-30 50 x 50L - 30 60 x 60L - 40 85 x 85L
7.5
-35 55 x 55L - 35 65 x 65L - 45 90 x 90L
-40 60 x 60L - 40 70 x 70L - 50 95 x 95L
-45 65 x 65L - 45 75 x 75L - 75 130 x 130L
-50 70 x 70L - 50 80 x 80L -100 155 x 155L
CQMB25- 5 30 CQ-M5 x 30L - 75 115 x 115L CQMB100- 10 65 CQ-M10 x 65L
- 10 35 x 35L -100 140 x 140L - 15 70 x 70L
- 15 40 x 40L CQMB50- 10 45 CQ-M6 x 45L - 20 75 x 75L
- 20 45 x 45L - 15 50 x 50L - 25 80 x 80L
- 25 50 x 50L - 20 55 x 55L - 30 85 x 85L
8.5
- 30 55 x 55L - 25 60 x 60L - 35 15.5 90 x 90L
- 35 60 x 60L - 30 65 x 65L - 40 95 x 95L
- 40 65 x 65L - 35 12.5 70 x 70L - 45 100 x 100L
- 45 70 x 70L - 40 75 x 75L - 50 105 x 105L
- 50 75 x 75L - 45 80 x 80L - 75 140 x 140L
- 50 85 x 85L -100 165 x 165L
- 75 120 x 120L
-100 145 x 145L

1010
 Compact Cylinder: Guide Rod Type CQM Series

Mounting Bolt for CDQM/With Auto Switch (Built-in magnet)

Cylinder model C D Mounting bolt part no. Cylinder model C D Mounting bolt part no. Cylinder model C D Mounting bolt part no.
CDQMB12- 5 30 CQ-M3 x 30L CDQMB32- 5 40 CQ-M5 x 40L CDQMB63- 10 60 CQ-M8 x 60L
-10 35 x 35L - 10 45 x 45L - 15 65 x 65L
-15 40 x 40L - 15 50 x 50L - 20 70 x 70L
6.5
-20 45 x 45L - 20 55 x 55L - 25 75 x 75L
-25 50 x 50L - 25 60 x 60L - 30 80 x 80L
-30 55 x 55L - 30 65 x 65L - 35 14.5 85 x 85L
9
CDQMB16- 5 30 CQ-M3 x 30L - 35 70 x 70L - 40 90 x 90L
-10 35 x 35L - 40 75 x 75L - 45 95 x 95L
-15 40 x 40L - 45 80 x 80L - 50 100 x 100L
6.5
-20 45 x 45L - 50 85 x 85L - 75 125 x 125L
-25 50 x 50L - 75 110 x 110L -100 150 x 150L
-30 55 x 55L -100 135 x 135L CDQMB80- 10 65 CQ-M10 x 65L
CDQMB20- 5 35 CQ-M5 x 35L CDQMB40- 5 45 CQ-M5 x 45L - 15 70 x 70L
-10 40 x 40L - 10 50 x 50L - 20 75 x 75L
-15 45 x 45L - 15 55 x 55L - 25 80 x 80L
-20 50 x 50L - 20 60 x 60L - 30 85 x 85L
-25 55 x 55L - 25 65 x 65L - 35 15 90 x 90L
6.5
-30 60 x 60L - 30 70 x 70L - 40 95 x 95L
7.5
-35 65 x 65L - 35 75 x 75L - 45 100 x 100L
-40 70 x 70L - 40 80 x 80L - 50 105 x 105L
-45 75 x 75L - 45 85 x 85L - 75 130 x 130L
-50 80 x 80L - 50 90 x 90L -100 155 x 155L
CDQMB25- 5 40 CQ-M5 x 40L - 75 115 x 115L CDQMB100- 10 75 CQ-M10 x 75L
-10 45 x 45L -100 140 x 140L - 15 80 x 80L
-15 50 x 50L CDQMB50- 10 55 CQ-M6 x 55L - 20 85 x 85L
-20 55 x 55L - 15 60 x 60L - 25 90 x 90L
-25 60 x 60L - 20 65 x 65L - 30 95 x 95L
8.5
-30 65 x 65L - 25 70 x 70L - 35 15.5 100 x 100L
-35 70 x 70L - 30 75 x 75L - 40 105 x 105L
-40 75 x 75L - 35 12.5 80 x 80L - 45 110 x 110L
-45 80 x 80L - 40 85 x 85L - 50 115 x 115L
-50 85 x 85L - 45 90 x 90L - 75 140 x 140L
- 50 95 x 95L -100 165 x 165L CUJ
- 75 120 x 120L
-100 145 x 145L CU
CQS
JCQ
CQ2
RQ
CQM
CQU
MU

D-
-X
Technical
Data
1011
CQM Series

Dimensions
ø12 to ø25
V

ø12 V ø16
2 x 2 x øOB counterbore with depth RB 2 x M5 x 0.8
Auto switch
2 x øHB through

2 x HA through Q F
A

øIB
K

øIA

2 x øN through
T
EB

EA
M
K

(KB)
A

2 x 2 x OA
V

Note)
M Flat washer L 2 x 2 x RA (RB)
4 pcs
EB W B + Stroke

EA A + Stroke

ø20, 25

(mm)
Bore size Stroke range Without auto switch With auto switch
(mm) (mm) EA EB F HA OA HB IA IB
A B A B
12 5 to 30 26.5 17 31.5 22 25 24 5 M3 x 0.5 M4 x 0.7 3 +0.2
0 32 31.5
16 5 to 30 26.5 17 31.5 22 29 28 5 M3 x 0.5 M4 x 0.7 3 +0.2
0 38 37
20 5 to 50 32 19.5 42 29.5 36 34 5.5 M4 x 0.7 M6 x 1.0 4 +0.2
0 47 45.5
25 5 to 50 35.5 22.5 45.5 32.5 40 38 5.5 M5 x 0.8 M6 x 1.0 5 +0.2
0 52 50.5

Bore size
(mm) KA KB L M N OB Q RA RB T V W
12 10 ± 0.1 7.1 3.5 15.5 3.5 6.5 7.5 7 4 0.5 14.9 6
16 14 ± 0.1 9.9 3.5 20 3.5 6.5 7.5 7 4 0.5 20 6
20 17 ± 0.1 12 4.5 25.5 5.4 9 9 10 7 1 26 8
25 22 ± 0.1 15.6 5 28 5.4 9 11 10 7 1 30 8
Note) For the following bore/stroke sizes, the through-hole is threaded.
Standard without auto switch: ø12 and ø16; 5 stroke, ø20; 5 to 15 stroke, ø25; 5 and 10 stroke,
Built-in magnet with auto switch: ø20; 5 stroke

1012
 Compact Cylinder: Guide Rod Type CQM Series

Dimensions

ø32 to ø50
2 x HA through
2 x øHB through 2xP Auto switch
V

2 x øN through Q F
A
K

2 x 2 x øOB counterbore with depth RB

øI
B

øIA

EC
EB
EA
M
Z

(KB)
K
A

M
EC W L B + Stroke
EB A + Stroke
EA J

2 x 2 x RA 2 x 2 x OA

Both ends tapped (CQMA)

CUJ
CU
(mm)
Without auto switch With auto switch CQS
Bore size Stroke range P P EA EB EC
(mm) (mm) A B F Q
— TN TF
A B F Q
— TN TF JCQ
5 5.5 11.5 M5 x 0.8 — —
32 10 to 50
40 23
50 33 7.5 10.5 Rc 1/8 NPT 1/8 G 1/8 45 43 34.4 CQ2
7.5 10.5 Rc 1/8 NPT 1/8 G 1/8
75, 100 50 33
5 to 50 46.5 29.5 RQ
40 8 11 Rc 1/8 NPT 1/8 G 1/8 56.5 39.5 8 11 Rc 1/8 NPT 1/8 G 1/8 52 50 41.4
75, 100 56.5 39.5
10 to 50 50.5 30.5 CQM
50 10.5 10.5 Rc 1/4 NPT 1/4 G 1/4 60.5 40.5 10.5 10.5 Rc 1/4 NPT 1/4 G 1/4 64 62 53.4
75, 100 60.5 40.5
CQU
Bore size
(mm)
HA OA HB IA IB J KA KB L M N OB RA RB V W Z MU
32 M5 x 0.8 M6 x 1.0 5 +0.2
0 60 58.5 4.5 28 ± 0.2 19.8 7 34 5.5 9 10 7 38 10 14
40 M5 x 0.8 M6 x 1.0 5 +0.2
0 69 67.5 5 33 ± 0.2 23.3 7 40 5.5 9 10 7 46 10 14
50 M6 x 1.0 M8 x 1.25 6 +0.2
0 86 84.5 7 42 ± 0.2 29.7 8 50 6.6 11 14 8 58 12 19

D-
-X
Technical
Data
1013
CQM Series

Dimensions

ø63 to ø100

2 x øHB through Auto switch

2 x HA through
2 x øN through 2xP Q F
øIB
V

2 x 2 x øOB counterbore with depth RB

A
K

øIA

EC
EB
EA
M
Z

(KB) W L B + Stroke
M A + Stroke
K
A

EC
EB
EA J

2 x 2 x RA
2 x 2 x OA

Both ends tapped (CQMA)

(mm)
Without auto switch With auto switch
Bore size Stroke range EA EB EC F HA HB IA IB J KA KB L M
(mm) (mm) A B A B
10 to 50 56 36 +0.2
63 66 46 77 74 59.6 10.5 M6 x 1 6 0 103 100 7 50 ± 0.2 35.4 8 60
75, 100 66 46
10 to 50 67.5 43.5 +0.2
80 77.5 53.5 98 95 79.5 12.5 M8 x 1.25 8 0 132 129 6 65 ± 0.2 46 10 77
75, 100 77.5 53.5
10 to 50 79 53 +0.2
100 89 63 117 114 99 13 M10 x 1.5 10 0 156 153 6.5 80 ± 0.2 56.6 10 94
75, 100 89 63

Bore size P
N OA OB Q RA RB V W Z
(mm) — TN TF
63 9 M10 x 1.5 14 Rc 1/4 NPT 1/4 G 1/4 15 18 10.5 69 12 19
80 11 M12 x 1.75 17.5 Rc 3/8 NPT 3/8 G 3/8 16 22 13.5 89 14 26
100 11 M12 x 1.75 17.5 Rc 3/8 NPT 3/8 G 3/8 23 22 13.5 113 16 26

1014
 CQM Series
Auto Switch Mounting 1
Minimum Auto Switch Mounting Stroke
(mm)
Auto switch D-A7 D-F7W
Bore size
No. model D-M9WV D-M9W D-F7V D-A8 D-F7WV D-F7 D-A7H D-J79W ∗
of auto D-M9V D-A9V D-A9 D-M9 D-A79W D-F7BA D-P4DW
(mm)
switch D-M9AV D-M9A D-J79C D-A73C D-F7BAV D-J79 D-A80H D-F7NT
mounted D-A80C D-F79F
12, 16, 1 pc. 5 5 10(5) 10 15(5) 15(10) — — — — — — — —
20, 25 2 pcs. 5 10 10 10 15(5) 15(10) — — — — — — — —
32, 40, 50, 1 pc. 5 5 10(5) 10 10(5) 15(10) 5 5 10 15(5) 15(5) 15 20(10) 15
63, 80, 100 2 pcs. 5 10 10 15 10(5) 15 5 10 15 15(5) 15(10) 20 20(15) 15
∗ D-P4DWL type is compatible with bore sizes ø40 to ø100.
Note) The dimension stated in ( ) shows the minimum mountable stroke when the auto switch does not project from the end face of the cylinder body and the lead wire bending
space is not hindered. (Refer to the figure below.)
The auto switch and its mounting bracket are ordered separately. (Bore sizes ø12 to ø25 do not need any auto switch mounting bracket.)

Proper Auto Switch Mounting Position (Detection at stroke end) and Its Mounting Height
D-A9 D-M9W D-A9V
D-M9 D-M9A D-M9V
ø12 A B W
D-M9WV Approx. Hs
D-M9AV

ø16, 20, 25
A B A W Approx. Hs

CUJ

ø32 to ø100
CU
A B A W Approx. Hs
CQS
JCQ
CQ2
RQ
Auto Switch Mounting
Proper Auto Switch Mounting Positions (mm) Height (mm)
CQM
Auto switch D-M9 Auto switch
model D-A9 D-M9V D-M9A model
D-A9V
D-M9V
D-M9WV
CQU
D-A9V D-M9W D-M9AV
D-M9WV D-M9AV
Bore
size A B W A B W A B W
Bore
size Hs Hs
MU
12 1.5 0.5 1.5 (4) 5.5 4.5 5.5 5.5 4.5 7.5 12 17 19
16 2 0 2 (4.5) 6 4 6 6 4 8 16 19 21
20 6 3.5 –1.5 (1) 10 7.5 2.5 10 7.5 4.5 20 22.5 24
25 7 5.5 –3.5 (–1) 11 9.5 0.5 11 9.5 2.5 25 24.5 26
32 8 5 –3 (–0.5) 12 9 1 12 9 3 32 27 29
40 12 7.5 –5.5 (–3) 16 11.5 –1.5 16 11.5 0.5 40 30.5 32.5
50 10 10.5 –8.5 (–6) 14 14.5 –4.5 14 14.5 –2.5 50 36.5 42
63 12.5 13.5 –11.5 (–9) 16.5 17.5 –7.5 16.5 17.5 –5.5 63 40 42
80 15.5 18 –16 (–13.5) 19.5 22 –12 19.5 22 –10 80 50 52
D-
100 20 23 –21 (–18.5) 24 27 –17 24 27 –15 100 60 62
Note 1) ( ): For D-A93 type -X
Note 2) W is used for mounting D-A9, D-M9, D-M9W and D-M9A types.
Note 3) Negative figures for W in the table indicate that an auto switch is mounted inward from the edge of the cylinder body. Technical
Note 4) Adjust the auto switch after confirming the operating condition in the actual setting. Data
1015
 CQM Series
Auto Switch Mounting 2
Proper Auto Switch Mounting Position (Detection at stroke end) and Its Mounting Height
D-A7 D-F7V D-A7H D-F7 D-P4DW
D-A80 D-J79C D-A80H D-J79
D-A73C D-F7WV D-F7W
D-A80C D-F7BAV D-J79W
D-A79W D-F7BA
D-F79F ø40 to ø100
ø32 to ø100 D-F7NT A B Approx. Hs
A B Approx. Hs

Proper Auto Switch Mounting Position (mm)

Auto switch D-A72/A7H/A80H
model D-A73C/A80C/F7
D-A73 D-J79/F7W/J79W
D-F7NT D-A79W D-P4DW
D-A80 D-F7V/F7WV
D-F79F/J79C
D-F7BA/F7BAV
Bore size A B A B A B A B A B
32 9 6 9.5 6.5 14.5 11.5 6.5 3.5 — —
40 13 8.5 13.5 9 18.5 14 10.5 6 9 4.5
50 11 11.5 11.5 12 16.5 17 12 8.5 7 7.5
63 13 14.5 14 15 15 16 11 12 9.5 10.5
80 17 18 18 18.5 19 19.5 15 15.5 13.5 14
100 21 24 21.5 24.5 22.5 25.5 18.5 21.5 17 20
∗ D-P4DWL type is compatible with bore sizes ø40 to ø100.
Note) Adjust the auto switch after confirming the operating condition in the actual setting.

Auto Switch Mounting Height (mm)

Auto switch D-A7H/A80H
D-F7V
model D-A7 D-F7/J79/F7W D-A73C
D-A79W D-F7WV D-J79C D-P4DW
D-A80 D-J79W/F79F D-A80C
D-F7BAV
D-F7BA/F7NT
Bore size Hs Hs Hs Hs Hs Hs Hs
32 31.5 32.5 38.5 34 35 38 —
40 35 36 42 37.5 38.5 41.5 44
50 41 42 48 43.5 44.5 47.5 50
63 47.5 48.5 54.5 50 51 54 56.5
80 57.5 58.5 64.5 60 61 64 66.5
100 67.5 68.5 74.5 70 71 74 76.5
∗ D-P4DWL type is compatible with bore sizes ø40 to ø100.

Operating Range
(mm)
Bore size
Auto switch model
12 16 20 25 32 40 50 63 80 100
D-A9/A9V 6 7.5 10 10 9.5 9.5 9.5 11.5 9 11.5
D-M9/M9V
D-M9W/M9WV 3 4 5.5 5.5 6 6 7 7.5 8 8.5
D-M9A/M9AV
D-A7/A80 — — — — 12 11 10 12 12 13
D-A79W — — — — 13 14 14 16 15 17
D-F7/F7V
D-J79/J79C
D-F7W/F7WV — — — — 6 6 6 6.5 6.5 7
D-J79W
D-F7BA/F7BAV
D-F7NT/F79F
D-P4DW — — — — — 5 5 5 5 5.5
∗ Since the operating range is provided as a guideline including hysteresis, it cannot be guaranteed (assuming
approximately ±30% dispersion). It may vary substantially depending on an ambient environment.
∗ Auto switch mounting brackets BQ2-012 are not used for sizes over ø32 of D-A9(V)/M9(V)/M9W(V)/M9A(V) types.
The above values indicate the operating range when mounted with the current auto switch installation groove.
1016
 Auto Switch Mounting CQM Series

Auto Switch Mounting Bracket: Part No.

Auto switch Bore size (mm)

mounting
ø12 ø16, ø20, ø25 ø32, ø40, ø50 ø63, ø80, ø100
surface
Port side Port side
Port side Port side

C A C A C A C A

B B B
B
Auto switch mounting surface Auto switch mounting surface Auto switch mounting surface Auto switch mounting surface
Auto switch
model A, B, C sides Port, A, B, C sides Port side A, B, C sides Port, A, B, C sides
BQ-2
BQ2-012
2 kinds of auto switch mounting
D-A9 brackets are used as a set.
Set screw
D-A9V (not used)
D-M9 Auto switch
Auto switch mounting Auto switch mounting Auto switch mounting
D-M9V mounting
bracket not required. bracket not required. bracket not required.
D-M9W bracket not
D-M9WV required.
D-M9A
D-M9AV

Note 1) For each cylinder series, when a compact auto switch is mounted on the three sides (A, B and C above) other than the port side of bore sizes ø32 to ø50, the auto switch
mounting brackets above are required. Order them separately from cylinders.
Order example
CDQMB32-50-M9BW……1
BQ-2……2 pcs.
BQ2-012……2 pcs.
Note 2) When shipping cylinders, auto switch mounting brackets and auto switches are shipped together.

Bore size (mm) [Mounting screw set made of stainless steel]

Auto switch model The following set of mounting screws made of stainless steel (including nuts) is
32 40 50 63 80 100 available. Use it in accordance with the operating environment. (Please order BQ-2
separately, since auto switch spacers (for BQ-2) are not included.)
CUJ
D-A7/A80
BBA2: For D-A7/A8/F7/J7 types
D-A73C/A80C
D-A7H/A80H
D-F7BA/F7BAV auto switches are mounted on the cylinder with the stainless steel CU
screws above when shipped. When an auto switch is shipped independently, BBA2
D-A79W is attached.
D-F7/J79
Note 4) Refer to page 1685 for the details of BBA2 screws.
CQS
D-F7V BQ-2
Note 5) When D-M9A(V) type is mounted on a side other than ø32, ø40 and ø50
D-J79C
D-F7W/J79W
port sides, order auto switch mounting brackets BQ2-012S and BQ-2, and a
stainless steel screw set BBA2.
JCQ
D-F7WV
D-F7BA/F7BAV Auto Switch Mounting Bracket Weight CQ2
D-F79F/F7NT Mounting bracket part no. Weight (g)
D-P4DW — BQP1-050 BQ-2 1.5
RQ
Note 3) Auto switch mounting brackets and auto switches are included when the BQ2-012 5
cylinder is shipped. For only ø40 to ø100 with D-P4DW, they are assembled
at the time of shipment.
BQP1-050 16
CQM
Other Applicable Auto Switches/Refer to pages 1575 to 1701 for further information on auto switches. CQU
Type Model Electrical entry (Fetching direction) Features
D-A73
Grommet (perpendicular)
— MU
D-A80 Without indicator light
Reed auto switch
D-A73H, A76H —
Grommet (in-line)
D-A80H Without indicator light
D-F7NV, F7PV, F7BV —
D-F7NWV, F7BWV Grommet (perpendicular) Diagnostic indication (2-color indicator)
D-F7BAV Water resistance (2-color indicator)
D-F79, F7P, J79 —
Solid state auto switch
D-F79W, F7PW, J79W Diagnostic indication (2-color indicator)
D-F7BA Grommet (in-line) Water resistance (2-color indicator) D-
D-F7NT With timer
D-P5DW Magnetic field resistant (2-color indicator)
∗ For solid state auto switches, auto switches with a pre-wired connector are also available. Refer to pages 1648 and 1649 for details.
-X
∗ Normally closed (NC = b contact) solid state auto switches (D-F9G/F9H types) are also available. Refer to page 1593 for details.
∗ D-A7/A8/F7/J7 types cannot be mounted on ø12 to ø25.
Technical
Data
1017
 CQM Series
Auto Switch Mounting 3
The number of surfaces and grooves where an auto switch can be mounted (as direct mounting).

The number of the surfaces and grooves where the auto switch can be mounted, by auto switch type, are shown in the table below.
Auto switch type D-A9(V), M9(V), M9W(V), M9A(V) D-A7, A8, F7, J7
Bore size A B C D A B C D
(Mounting (Mounting (Mounting (Mounting (Mounting (Mounting (Mounting (Mounting
Port aperture (mm) groove no.) groove no.) groove no.) groove no.) groove no.) groove no.) groove no.) groove no.)
A
12 (1) (1) (1)
16 (2) (2) (2)
D B 20 (2) (2) (2) (2)
View from 25
piston rod end (2) (2) (2) (2)

C 32 (2)
40 (2)
50 (2)
63 (2) (2) (2) (2)
80 (2) (2) (2) (2)
100 (2) (2) (2) (2)

1018
 CQM Series
Specific Product Precautions
Be sure to read this before handling the products.
Refer to back page 50 for Safety Instructions and pages 3 to 12 for Actuator
and Auto Switch Precautions.

Mounting Others

Warning Caution
1. Do not put hands or fingers between the plate 1. This product should not be used as a stopper.
and cylinder tubing. 2. Do not disassemble and modify the product.
Never put hands or fingers in the gap between the plate and
cylinder tubing when the piston rods are retracted. Due to the
3. For example, in a pressing application, the
heavy power output of the cylinder, failure to comply with this cylinder thrust is directly applied to the plate,
directive may result in trapping and subsequent injury to the therefore, make sure that the pressing force is
human body. applied to the plate directly on the extended
axial line of a rod. (Below figures.)

Caution
1. Do not scratch or dent the sliding parts of the
piston rod and guide rods.
Damage to seals may cause air leakage or faulty operation.
2. Mounting of work piece
When screwing a bolt onto the threaded portion of the plate
surface, be certain that the guide rods are fully extended to the
end.
Also, be careful that the tightening torque is not applied to the
CUJ
guide rods.
3. Make sure that the cylinder mounting sur-
CU
face has a flatness of 0.02 mm or less. CQS
When mounting the cylinder body or workpieces on the plate,
improper flatness of the mounting surface may cause
malfunctions. JCQ
When the flatness of a workpiece is not sufficient, attaching a
shim such as a flat washer, etc., at the place of a mounting CQ2
bolt between the workpiece and the plate may reduce the
affect on the operation. RQ
CQM
CQU
MU

D-
-X
Technical
Data
1019