Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
67 views

Assignment 1 For Circuits

This document contains 16 questions about circuit analysis techniques including: 1) Calculating current, conductance, and power in a circuit. 2) Finding current and power dissipated for a resistor connected to a voltage source. 3) Finding current and resistance given instantaneous power absorbed. 4) Writing KCL and KVL equations for circuits. 5) Determining number of branches and nodes, and identifying series/parallel elements. 6) Setting up a circuit to operate a bulb from a higher voltage supply using rheostats. 7) Finding equivalent resistances and voltages in various circuits. 8) Solving circuits using techniques like mesh analysis, nodal analysis, and star-

Uploaded by

Amir Eyni
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views

Assignment 1 For Circuits

This document contains 16 questions about circuit analysis techniques including: 1) Calculating current, conductance, and power in a circuit. 2) Finding current and power dissipated for a resistor connected to a voltage source. 3) Finding current and resistance given instantaneous power absorbed. 4) Writing KCL and KVL equations for circuits. 5) Determining number of branches and nodes, and identifying series/parallel elements. 6) Setting up a circuit to operate a bulb from a higher voltage supply using rheostats. 7) Finding equivalent resistances and voltages in various circuits. 8) Solving circuits using techniques like mesh analysis, nodal analysis, and star-

Uploaded by

Amir Eyni
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Assignment-1

1. In the given circuit, calculate current I, the conductance G and the power P?

2. A voltage source of 20Sinπt V is connected across a 5KΩ resistor. Find the current through
the resistor and power dissipated.

3. A resistor absorbs an instantaneous power of 20Cos 2t mW when connected to a voltage


source V=10Cost V. Find I and R.

4. Write KCL and KVL equations for the given circuits:

5. Determine the number of branches and nodes in the circuit shown. Identify which elements
are in series and which are in parallel.

6. A bulb rated 110V , 60W has to be operated from a 230V supply. Show the arrangement.
A 50Ω and a 100Ω rheostats are each rated at 100W. What is the maximum voltage that may
be applied without causing overheating of either rheostat (i) when they are connected in
series and (ii) when they are in parallel.
7. Find Req for the given circuit. Find 􀀨􀁛􀁜 for the given circuit.

8. Find I0 and V0 in the given circuit. Calculate the power dissipated in 3Ω.

9. Two batteries of 24V and 20V with internal resistances of 0.4Ω and 0.25Ω respectively are
connected in parallel across a load of 4Ω. Calculate (i) the current supplied by each battery
and (ii) voltage across the load.
Calculate the voltage across AB in the network and indicate the polarity of the voltage using
star-delta conversion. Determine the equivalent resistance Req.

10. In the given circuit, determine all branch currents.


11. Write resistive potential dividers expression for the circuit.

12.

13.

14. Delta  Wye Transformations

15. Use nodal analysis method to write three independent equations in terms of the node voltage
v1,v2,v2 for the circuit shown below. Do not use any other variable in your equations. If
appropriate use super node. Do not simplify your equations.
a. Solve for the node voltages V1,V2, and V3 (1 point)

b. What is iα? (1 point )

c. How much power is absorbed by the 24 V source? ( 1 point )

16. Use mesh analysis method to write three independent equations in terms of the currents i1,
i2, i3 for the circuit shown below. Do not use any other variable in your equations. If
appropriate use super mesh. Do not simplify your equations.

a. Solve for the currents i1 ,i2 , and i3 (1 point)

b. How much power is being absorbed by the dependent sources? ( 1 point)

c. How much power is being dissipated by the 5kohm resistor? (1 point)

You might also like