portable surface roughness tester

SURFTEST SJ-410 Series

Form Measurement
Numerous options provide easier, smoother
and more accurate measurements

Bulletin No. 2196

 Portable surface roughness tester evolves!
The large touch-screen, color-graphic LCD ensures both intuitive control and advanced operability

Enhanced power for making measurements on site Applicable standards

Color-graphic LCD Backlight provided Complies with many industry standards
The color-graphic LCD with excellent visibility A backlight improves usability in dim testing The Surftest SJ-410 complies with the following
displays calculated results and assessed profiles environments. standards: JIS (JIS-B0601-2001, JIS-B0601-1994,
even clearer. This is useful for checking results JIS B0601-1982), VDA, ISO-1997, and ANSI.
without printing them out.

Touch screen for easier operations

The screen display can be switched between icon display and text display.

Icon display Text display

Easy to use and highly functional

This portable surface roughness tester is equipped with analysis
functionality rivaling that of benchtop surface roughness testers.

Data compensation
Simple contour analysis function

Multilingual support High accuracy measuring

The display interface supports 16 languages. A wide range, high-resolution detector
Measuring range/ resolution
800µm /0.01µm
80µm /0.001µm
8µm /0.0001µm
SJ-412
High straightness
drive unit
Straightness/ traverse length
0.3µm /25mm (SJ-411)
0.5µm /50mm (SJ-412)

SJ-411

2
 Surftest SJ- 410
Interfaces Data storage
A variety of interfaces supplied as standard Memory card (optional) is supported
The external device interfaces that come as standard include USB, RS- The measurement conditions and data can be stored in a memory card
232C, SPC output and footswitch I/F. (optional) and recalled as required. This enables batch analysis and
printout of data after on-site measurement.

•Measurement condition
Internal memory: 10 sets
Memory card: 500 sets
•Measurement result
Memory card: 1000 sets

Password protection
Access to functions can be restricted by a password
A pre-registered password can limit use of measurement conditions and
other settings to the tester’s administrator.

Carrying case
The unit is easily transported in a dedicated carrying case
Key-sheet buttons which includes holders for the accessories as well as the
tester itself. (Standard accessory.)
A sturdy key-sheet-button panel with superior durability in any en-
vironment is provided. For repeat measurement of the same work,
simply pressing the start switch can complete measurement,
analysis and printout.

Printer
High-speed printer prints out measurement results on site
A high-quality, high-speed thermal printer prints out measurement results.
It can also print a BAC curve or an ADC curve as well as calculated
results and assessed profiles. These results and profiles are printed out
in landscape format, just as they appear on the color-graphic LCD.

3
 Enhanced measuring functions

Your choice of skidless or skidded measurement Patent registered in Japan, U.S.A.. Patent pending in Germany

•Skidless measurement •Skidded measurement

Skidless measurement is where surface features are measured relative In skidded measurements, surface features are measured with reference
to the drive unit reference surface. This measures waviness and finely to a skid following close behind the stylus. This cannot measure
stepped features accurately, in addition to surface roughnness, but waviness and stepped features exactly but the range of movement
range is limited to the stylus travel available. The SJ-410 series supports within which measurement can be made is greater because the skid
Traverse direction
a variety of surface feature measurements simply by replacing the tracks the workpiece surface contour.
stylus. Traverse direction Traverse direction
Detector Traverse direction Detector Traverse direction
Fulcrum point of Skid

Stylus Fulcrum point of Stylus Skid Stylus Fulcrum point of Stylus

Measuring example of stepped Measured profile Measuring example of stepped Measured profile
features: Skidless features: Skidded

測　定

Powerful support for leveling Patent registered in Japan, U.S.A.. Patent pending in Germany

The height/tilt adjustment unit comes as standard for leveling the drive unit prior to making skidless
測　定 measurements and, supported by guidance from
測　定
the unique D.A.T.
測　定
function, makes it easy to achieve highly accurate alignment. 測　定
測　定

• Height/tilt adjustment unit (Standard accessory)

Height adjustment knob 測定データ

Preliminary measurement Amount of tilt adjustment

With Preliminary DAT screen

DAT measurement (adjustmentamount)
Height/tilt adjustment unit Tilt adjustment knob
Final measurement
Without Preliminary Intuitive adjustment
DAT measurement using the tilt adjustment knob OK
NG
Repeat

When the SJ-410 Series detector is mounted on the manual column stand*1 for measurement, it can be combined with any of the optional products for easier
leveling: leveling table*1, 3-axis alignment table*1 or tilt adjustment unit*1.
*1: For details about optional products, see Pages 6-7.

4
 More measuring functions than expected from a compact tester
Usually, a spherical or cylindrical surface (R-surface) cannot be evaluated, but, by removing
the radius with a filter, R-surface data is processed as if taken from a flat surface.

R-Surface
compensation

Recalculating Assessing a single measurement result under

two different evaluation conditions
Previously measured data can be recalculated for use in other
evaluations by changing the current standard, assessed profile and A single measurement enables simultaneous analysis under two
roughness parameters. different evaluation conditions. A single measurement allows calculation
of parameters and analysis of assessed profiles without the need for
recalculation after saving data, contributing to higher work efficiency.
GO/NG judgement function
An “OK/NG” judgment symbol is displayed when limits are set for
the roughness parameter. In case of “NG,” the calculated result
is highlighted. The calculated result can also be printed out.

Arbitrary sampling length setting

The “OK” symbol means the measurement
is within the limits set; “NG” means it is not, This function allows a sampling length to be arbitrarily set in 0.01mm
in which case an arrow points to either the increments (SJ-411: 0.1mm to 25mm, SJ-412: 0.1mm to 50mm).
upper or lower limit in the printout.
It also allows the SJ-410 series to make both narrow and wide range
measurements.
Narrow space measuring function Patent pending in Japan

Surface roughness measurement requires a run-up distance before

Simple contour analysis function
starting the measurement (or retrieving data). When the SJ-410 Point group data collected for surface roughness evaluation is used
Series measures, its run-up distance is normally set to 0.5mm. This to perform simplified contour analysis (step, step height, area and
distance, however, can be shortened to 0.15mm using the narrow coordinate variation). It assesses minute forms that cannot be assessed
part measurement function (starting from the origin point of the drive by a contour measurer.
unit). The function extends the possibility of measurement of narrow
locations such as grooves in piston ring / O-ring mounts.
•Narrow space measuring Typical applications
The run-up distance can Example: surface roughness measuring Example: surface roughness measuring
be shortened to 0.15mm of piston-ring groove of mounting groove for O-ring
by measuring from the Evaluation length Evaluation length
origin point. λc=2.5mm ø1.2 λc=0.8mm
1 sampling length 1 sampling length
Run up for narrow parts 0.5 2.5 Workpiece
1.8

: 0.15mm
0.1 Stylus
Normal run up: 0.5mm 1.3
0.5

3.5 Overruns surface 2.5 Step Step volume

using 0.5mm run-up
Run-up of 0.5mm is not
enough for performing
the measurement

Real sampling
This function samples stylus displacement for a specified time
without engaging detector traverse, which enables use as a
simplified vibration meter or displacement gage incorporated in
another system.
Dimensions Coordinate difference

5
 Optional Accessories

Simple column stand

Can be adjusted to match the height of the item to be measured.
Dimensions Unit: mm

No.178-039
Vertical adjustment range: 250mm
Dimensions: 400×250×578mm
Mass: 20kg

578
8.5

11
7
15

60
T-groove dimensions
40 120

12
400 250

Options for simple column stand

Three new optional products are available to be attached to the manual column stand (No.178-039). You can choose the unit that suits your application.
Or, you can also use the three products in any combination. Using the optional units makes SJ-411/412 more convenient and easier to use to ensure
accurate measurements.
•Auto-set unit (178-010)* •Tilting adjustment unit (178-030)*
This unit enables the vertical (Z axis) direction to be positioned This unit is used for aligning the workpiece surface with the detector
automatically (auto-set function). reference plane. It supports the DAT function to make the leveling of
A single button operation completes a series of operations from workpiece surfaces easier.
measurement, saving and auto-return (saving and auto-return can be Preliminary measurement
switched on and off by operating the drive unit).

±1.5°
10mm

•X-axis adjustment unit (178-020)* Tilt adjustment

This unit helps fine-tune the horizontal (X axis) direction.
Complete set of option-
al units for the manual
column stand
Tilting adjustment unit
Auto-set unit

12.5mm 12.5mm X-axis adjustment unit

*Cannot be used when the tester’s main

unit is an older model (SJ-401/402).

6
 3-axis Adjustment Table: 178-047 Patent registered in Japan, U.S.A.. Patent pending in Germany

This table helps make the alignment adjustments required when measuring cylindrical surfaces. The corrections for the pitch angle and the swivel angle
are determined from a preliminary measurement and the Digimatic micrometers are adjusted accordingly. A flat-surfaced workpiece can also be leveled
with this table.
Aligned Not aligned
Traverse direction Traverse direction End point
End point

Axial line Axial line

Start point
Start point

Recorded profiles

*V-block not included

DAT Function for the optional leveling table Patent registered in Japan, U.S.A.. Patent pending in Germany

The levelling table can be used to align the surface to be tested with the detector reference plane. The operator is guided through the procedure by
screen prompts.
DAT screen guides the
user when leveling
Digimatic micrometer
head
Amount of micrometer
head adjustment required
No.178-048 Leveling table (DAT)
Inclination adjustment angle: ±1.5°
Table dimensions: 130×100mm (Option)
Maximum load: 15kg

XY leveling tables Precision vise

The tester includes X- and Y-axes micrometer •Movement is in X- and Y-axes only. •Fits on the stand.
heads. This makes axis alignment much
easier because the tilt adjustment center is
the same as the rotation center of the table.
(Code No.178-042-1/178-043-1) Application
178-042-1 178-049
178-042-1(mm) 178-043-1(mm) 178-049(mm)
Order No. 178-052-1(inch) 178-053-1(inch) 178-058(inch/mm)
*with digital heads *with analog heads *with digital heads
Table dimensions 130×100mm
Maximum load 15kg •T-groove dimensions
Inclination adjustment ±1.5° — Order No. 178-019
angle 7
Clamping method Sliding jaws
4

Swiveling angle ±3° — Jaw opening 36mm

X/Y-axis travel range ±12.5mm ±12.5mm ±12.5mm Jaw width 44mm
Resolution 0.001mm 0.01mm 0.001mm Jaw depth 16mm
3

Dimensions (WxDxH) 262×233×83mm 220×189×83mm 262×233×55mm 13

Height 38mm
Mass 6.3kg 6kg 5kg Unit: mm

Cylinder attachment Reference step specimen

This block can be positioned on top of Used to calibrate detector sensitivity.
cylindrical objects to perform measurements. No.178-611
No.12AAB358 Step nominal values: 2μm/10μm
Diameter: ø15~60mm
Configuration:
•Cylindrical measurement block
•Auxiliary block
•Clamp *Drive unit not included.

7
 Optional Accessories: Detectors / Styli

Detectors Unit: mm Extension rods

11.5 10 60 14 • 12AAG202  Extension rod 50mm
3.1

φ14
14
φ

3.6
1.3

φ8
φ7

4 Skidless nosepiece Detector

（12AAB355） • 12AAG203  Extension rod 100mm
Order No. Measuring force
178-396-2 0.75mN ISO-1997 and JIS-2001 compliant detectors
Detectors that comply with previous standards,
178-397-2 4mN for general use, etc. * No more than one extension rod can be connected.

Styli Unit: mm
Standard stylus 44.7
12AAE882 (1μm) *1 Double-length for deep hole * 2
0.9 37.7 12AAE898 (2μm) *1
12AAE924 (1μm) 94.7
A 12AAE914 (5μm)
12AAC731 (2μm) *1 0.9 87.7
12AAB403 (5μm) ( ): Tip radius
7.6
5.2

Color
φ2.4

coding*3 12AAB415 (10μm)

φ1.2
12AAE883 (250μm) *4

φ2.4
3
1.8
0.6
Detail-A
90° ( ): Tip radius

For small hole For small hole / Double-length for deep hole *2
0.6 標準スタイラス
44.4 12AAC732 (2μm) *1 12AAE892 (2μm) *1
12AAB404 (5μm)
0.6 94.4深穴2倍用
0.4

0.6 37.7 12AAE908 (5μm)

15 12AAB416 (10μm) 0.6 87.7
φ2.4

φ0.6 30 ( ): Tip radius

φ0.6

φ2.4
( ): Tip radius
2.4
1.6
3.4
1.6

2.4
Detail-A
90°
φ1.2

Detail-A Color
φ1.2

A
3.4
1.6

A
（S＝5/1） coding*3

For extra-small hole For small hole *2 *4

0.4 44.2
小穴用 12AAC733 (2μm) *1 小穴用・深穴2倍
93.8 12AAE884 (φ1.6mm)
1.2

37.7 12AAB405 (5μm)

8.9 87.7 ( ): Tip radius
12AAB417 (10μm)
φ2.4

41
φ0.3
2.5

( ): Tip radius
1.2

90°
φ0.6

Color
φ1.2

Ball φ1.6
φ2.4

Detail-A A
（S＝5/1） coding*3

For ultra-small hole For ultra-small hole *4

44.2 12AAC734 (2μm) *1
0.4 極細穴用
37.7
12AAJ662 (φ0.5mm)
12AAB406 (5μm) Ball φ0.5
φ2.4

( ): Tip radius
φ0.3

細穴形状用
0.8

8.9 12AAB418 (10μm) 8.5

φ2.4

φ0.3
2.5

( ): Tip radius
3.1

Detail-A
90°
0.8

A 37.7
Detail-A Color
φ0.6

A 43.8
（S＝5/1） coding*3
For deep hole (double-length and triple-length) *2 For small slotted hole *2
94.7 144.7 94.4
超小穴用 137.7
Color 0.9 87.7 Color 0.9 0.6 0.6 87.7
A A 43.8
coding*3 coding*3
45 37.7
7
5.2

7.6
7.6

5.2

1.6

φ0.3

7
φ2.4

φ2.4

φ1.2 φ1.2 φ0.6

0.4

Detail-A 90° Detail-A 90° Ball φ0.5

φ0.3

φ1.2

φ2.4

Detail-A A
2X stylus 3X stylus 12AAE938 (2μm) *1
φ2.4

12AAC740 (2μm) *1 12AAC741 (2μm) *1 Detail-A A 12AAE940 (5μm)

12AAB413 (5μm) 12AAB414 (5μm) ( ): Tip radius
12AAB425 (10μm) 深穴用
12AAB426 (10μm)
( ): Tip radius ( ): Tip radius 細長穴用
極細穴形状用
*1 : Tip angle 60° *3 : Tip radius 1μm 2μm 5μm 10μm 250μm
*2 : For downward-facing measurement only. Color coding White Black No color Yellow No notch or color

*4 : Used for calibration, a standard step gauge (No.178-611, option) is also required

8
 Styli Unit: mm
For deep groove (10mm) For deep groove * (20mm) 2
44.7 12AAC735 (2μm) *1 95.2
0.9 37.7 12AAB409 (5μm) 12AAE893 (2μm) *1
A 12AAB421 (10μm) 87.7 12AAE909 (5μm)
( ): Tip radius ( ): Tip radius
14.2

φ2.4
φ2.4
13

Color

21.8
5.2
23
coding*3
φ1.2
Detail-A
90° φ1.2

For deep groove * (20mm) 2

For deep groove *2 45.2
44.7
(40mm) 37.7
深溝用2倍（
37.7
12AAC736 (2μm) *1 20mm） 12AAE895 (2μm) *1
12AAB408 (5μm) 12AAE911 (5μm)
深溝用（10mm） 12AAB420 (10μm) ( ): Tip radius

φ2.4
φ2.4

( ): Tip radius
24.2
23

43.8
42.6
A φ2.4
Color

5.2
coding*3 φ1.2
Detail-A 90°
φ1.2
For deep groove * (30mm) 2
For deep groove (30mm) / Double-length for deep hole *2
12AAC737 (2μm) *1 93.8 12AAE894 (2μm) *1
12AAB407 (5μm) 87.7 12AAE910 (5μm)
37.7 深溝用（40mm）(
φ2.4

φ2.4 12AAB419 (10μm)

45.2 ): Tip radius
( ): Tip radius0.9
31.8
33

φ3
A
5.2

Color
36.5
φ2.4

coding*3 37.7
24.2

35
23

5.2

Detail-A φ1.2 44.7

A
90° 識別色 φ1.2
φ1.2
For gear tooth A部詳細 90° For gear tooth / Double-length for deep hole *2
12AAB339 (2μm) *1 93.8 12AAE896 (2μm) *1
深溝用
43.8（30mm）
12AAB410 (5μm) 87.7 12AAE912 (5μm) *1
Color 37.7
12AAB422深溝用
(10μm)（20mm）
深溝用（30mm）
( ): Tip radius
60°

coding*3 深穴2倍
6.4

60°

( ): Tip radius
7.6

φ3

A
φ2.4

7
6.7

60° φ1.2
36.5

Detail-A
35

φ1.2
歯面用
For rolling circle waviness surface * 4
For rolling circle waviness / Double-length for deep hole *2 *4
44.7 12AAB338 (φ1.588) 94.7 12AAE886 (250μm)
0.9 37.7 ( ): Tip radius 0.9 87.7 ( ): Tip radius
5.2
7.6

Ball φ1.588 歯面用

φ2.4
φ2.4

φ1.2 φ1.2
深穴2倍
7.6
6.4
5.2

For knife-edge *4 For corner hole / Double-length for deep hole *2

44.7 12AAC738 (2μm) * 1
93.8 12AAE897 (2μm) *1
0.9 転がり円
37.7 12AAB411 (5μm) 87.7 12AAE913 (5μm) *2
A 転がり円うねり・深穴2倍
Color うねり用 12AAB423 (10μm) 35 ( ): Tip radius
coding*3
7.6

( ): Tip radius
φ1.2
φ2.4

45°

90°
φ2.4
φ1.6

Detail-A
φ
5.8
5

0.8

For eccentric arm *2 45.2 For hole bottom

ナイフエッジ用 12AAC739 (2μm) *1
10 12AAE899 (2μm) *1
φ2.4

1.4 37.7 44.3

A 12AAB412 (5μm) 0.5 穴測定コーナー用
37.7 ・深穴2倍 12AAE915 (5μm)
7.6

12AAB424 (10μm) ( ): Tip radius

φ1.2
φ2.4

Color ( ): Tip radius

7.4
6.2

90°
φ1

coding*3
5

φ2.4

Detail-A

*1: Tip angle 60° *3 : Tip radius 2μm 5μm 穴底用 10μm
*2: For downward-facing measurement only. Color coding Black No color Yellow
❈Customized special interchageable styli are available on request,
Please contact any Mitutoyo office for more information. *4 : Used for calibration, a standard step gauge (No.178-611, option) is also required
45.2
φ2.4

10 0.9 37.7
A
7.6

φ1.2
9
φ2.4

識別色
90°
 Optional Accessories: For External Output

Contour / Roughness analysis software Simplified communication program for

FORMTRACEPAK SURFTEST SJ series
More advanced analysis can be performed by loading SJ-410 series The Surftest SJ-410 series has a USB interface, enabling data to be
measurement data to software program FORMTRACEPAK via a transferred to a spreadsheet or other software.
memory card (option) for processing back at base. We also provide a program that lets you create inspection record
tables using a Microsoft Excel* macro.
This program can be downloaded free of charge from the Mitutoyo website.
http://www.mitutoyo.com/about/contacting-mac/
surftest-simple-communication-program/

SJ-410 FORMTRACEPAK
Required environment*
• OS: Windows XP-SP3 • Spreadsheet software: Microsoft Excel 2002
Windows Vista Microsoft Excel 2003
Windows 7 Microsoft Excel 2007
Digimatic mini processor DP-1VR Windows 8 (32/64bit) Microsoft Excel 2010/13
By connecting this printer to the Surftest SJ-410's digimatic output, *Windows OS and Microsoft Excel are products of Microsoft Corporation.
you can print calculation results, perform a variety of statistical *PC OS must be 32-Bits
analyses, draw a histogram or D chart, and also perform complicated The optional USB cable is also required.
operations for X-R control charts.
• USB cable for SJ-410 series No.12AAD510

No.264-504 -5A Calculation results input unit INPUT TOOL

This unit allows you to load Surftest SJ-410 calculation results (SPC
output) into commercial spreadsheet software on a PC via a USB
connector. You can essentially use a one-touch operation to enter
the calculation results (values) into the cells in the spreadsheet
software.
SJ-410 → DP-1VR Connecting cable
1m: No.936937
2m: No.965014

Measurement Data Wireless Communication System U-WAVE

USB-ITN-D USB keyboard signal conversion type*
This unit allows you to remotely load Surftest SJ-410 calculation No.06ADV380D IT-012U
results (SPC output) into commercial spreadsheet software on a PC. No.264-012-10
You can essentially use a one-touch operation to enter the *Requires the optional Surftest SJ-410
calculation results (values) into the cells in the spreadsheet connection cable.
software. 1m: No.936937
2m: No.965014

Optional accessories, consumables, and

others for SJ-410
U-WAVE-R U-WAVE-T * • Printer paper (5 rolls) No.270732
(Connects to the PC) (Connects to the SJ-410) • Durable printer paper (5 rolls) No.12AAA876
No.02AZD810D No.02AZD880D • Touch-screen protector sheet (10 sheets) No.12AAN040
*Requires the optional Surftest SJ-410 • Memory card (2GB) * No.12AAL069
connection cable.
No.02AZD790D
• Connecting cable (for RS-232C) No.12AAA882
*micro SD card (with a conversion adapter to SD card)

10
Specifications

Model No. SJ-411 SJ-412

inch/mm 178-581-01A 178-581-02A 178-583-01A 178-583-02A
Measuring X axis 25mm (1inch) 50mm (2inch)
range Z1 axis (detector unit) 800µm, 80µm, 8µm
*Up to 2,400µm with an optional stylus
Measuring principle Differential inductance
0.01µm (800µm range) / 0.001µm (80µm range) / 0.0001µm (8µm range)
Resolution
0.4µinch (32000µinch) / 0.04µinch (3200µinch) / 0.004µinch (320µinch)
Detector Stylus tip 60°/2µm (80µinch) 90°/5µm (200µinch) 60°/2µm (80µinch) 90°/ 5µm (200µinch)
Measuring force 0.75mN 4mN 0.75mN 4mN
Radius of skid curvature R40 mm (R1.57")
Measuring method Skidded measurement / skidless measurement
Measuring speed 0.05 , 0.1 , 0.2, 0.5, 1.0mm/s (0.002, 0.004, 0.02, 0.04 inch/s)
Drive unit: X-axis Drive speed 0.5 , 1, 2, 5mm/s (0.02, 0.04, 0.08, 0.2 inch/s)
Straightness 0.3µm / 25mm (12µinch/ 1inch) 0.5µm / 50mm (20µinch/ 2inch)
Height-tilt Height adjustment 10mm (0.39inch)
adjustment unit Tilt adjustment ±1.5°
Standards JIS1982 / JIS1994 / JIS2001 / ISO1997 / ANSI / VDA
Parameters Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax*1, Rz1max*2, S, HSC, RzJIS*3, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c),
Rσc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, Lo, Rpm, tp*4, Htp*4, R, Rx, AR, W, AW, Wx, Wte, Possible Customize
Measured profiles Primary, Roughness, DF, Filtered waviness curve, R-Motif, W-Motif
Graph analysis BAC and ADC curves
Data compensation Parabola/ Hyperbola/ Ellipse/ Circle/ Conic/ Tilting, Compensation off
Filter 2CR, PC75, Gaussian filter
λc 0.08 , 0.25 , 0.8, 2.5 , 8.0mm
Cut-off length
λs *5 2.5, 8.0, 25mm (100, 320, 1000µinch)
Sample length 0.08 , 0.25, 0.8 , 2.5 , 8.0 , 25.0mm
Number of sampling lengths ×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10, ×11, ×12, ×13, ×14, ×15, ×16, ×17, ×18, ×19, ×20
Arbitrary length 0.1~25mm 0.1~50mm
Customization Desired parameters can be selected for calculation and display
Simple contour analysis function Step, Step volume, Dimensions, Coordinate difference
DAT function Helps to adjust leveling during skidless measurement
Real sampling function Samples stylus displacement for a specified time without engaging detector traverse.
Statistical processing Static measurement (max. 3 parameters) is possible. Static processing for MAX, MIN, AVERAGE,
standard deviation, histogram and pass rate is possible
GO/ NG judgement*6 Max rule / 16% rule / Average rule / Standard deviation (1σ, 2σ, 3σ)
Functions Storage functions 10 measuring conditions can be stored in internal memory
Measurement conditions / Calculation results / GO / NG judgement result / Calculation results for each sampling length /
Printing function
Measurement curve / BAC / ADC / Environmental setting information
Japanese, English, German, French, Italian, Spanish, Portuguese, Korean,
Display languages
Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian Turkish, Swedish, Dutch
Internal memory: Measurement condition (10 sets)
Storage Memory card (option): 500 measurement condition, 10000 measuring data, 10000 text data, 500 statistic data,
1 backup of machine setting, the last ten traces (Trace 10)
External I/O USB I/F, Digimatic output, RS-232C I/F, External SW I/F
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
Battery *Charging time: about 4 hours (may vary due to ambient temperature)
Power supply *Endurance: about 1500 measurements (differs slightly due to use conditions / environment)
Power consumption 50W
Display unit 275×198×109mm (10.83×4.29×7.80inch)
Size
Height adjustment unit 130.9×63×99mm (5.16×2.48×3.90 inch)
(W×D×H)
Drive unit 128×35.8×46.6mm (5.04×1.41×1.83 inch) 154.5×35.8×46.6mm (6.08×1.41×1.83inch)
Display unit 1.7kg
Mass Height adjustment unit 0.4kg
Drive unit 0.6kg 0.64kg
Detector*7, Stylus*8, Roughness specimen AC adapter, Philips screwdriver,
Standard accessories 270732 Printing paper 12BAG834 Touch pen Strap for stylus pen, Operation manual,
12BAL402 Touch-screen protection sheet 12AAN041 Carrying case Quick reference manual, Warranty
*1: Only for VDA/ANSI/JIS'82 standards.
*2: Only for JIS'97 standard.
*3: Only for JIS'01 standard.
*4: Only for ANSI standard.
*5: λs may not be switchable depending on standard selected.
*6: Standard deviation only can be selected in ANSI.16% rule cannot be selected in VDA.
*7: Either No.178-396-2 or No.178-397-2 is supplied as a standard accessory depending on the Order No. of the main unit for SJ-410 Series.
*8: The standard stylus (No.12AAC731 or No.12AAB403), which is compatible with the detector supplied, is a standard accessory.

11
 Unit: mm Example of mounting on simple column stand. (Code No. 178-039)*
Connecting cable (1.5m)
*For details see page 6.
ø14

63

© 2015 Mitutoyo America Corporation

275 109
35.8

Unit: mm
Vertical travel

25（50）
length
10

99
90
45.8
Tilting range
±1.5°

198

578
25.4 8.5

250
（50.8） （60）
15°
(0.9) 54 33.5 130.9

11
7
219.3（245.8） 15

40
T-groove dimensions
*The dimensions in parentheses indicate those for SJ-412

60
175（201.5） 40

12
120
Measuring range
400 250

*The dimensions in parentheses indicate those for SJ-412

Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring
Whatever your challenges are, Code No.178-039　簡易スタ ンド外観寸法図

Mitutoyo supports you from start to finish.

Mitutoyo is not only a manufacturer of top-quality

measuring products but one that also offers qualified
support for the lifetime of the equipment, backed by
comprehensive services that ensure your staff can make
the very best use of the investment.
Test Equipment Small Tool Instruments
Sensor Systems Digital Scale and DRO Systems
and Seismometers and Data Management Apart from the basics of calibration and repair, Mitutoyo
offers product and metrology training, as well as IT
support for the sophisticated software used in modern
measuring technology. We can also design, build, test
and deliver measuring solutions and even, if deemed
cost-effective, take your critical measurement challenges
in-house on a sub-contract basis.

Find additional product literature

and our product catalog
www.mitutoyo.com Mitutoyo America Corporation
www.mitutoyo.com
One Number to Serve You Better
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance
data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We
1-888-MITUTOYO (1-888-648-8869)
therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations,
descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our
General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications M3 Solution Centers:
are subject to change without notice.
Aurora, Illinois (Headquarters)
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may
require prior approval by an appropriate governing authority. Boston, Massachusetts
Trademarks and Registrations Huntersville, North Carolina
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate Mason, Ohio
companies should be contacted for more complete trademark and registration information.
Plymouth, Michigan
City of Industry, California
Birmingham, Alabama
Renton, Washington
Houston, Texas

2.5M 0815-03 • Printed in USA • Aug. 2015