Form Measurement

Portable Surface Roughness Tester

SURFTEST SJ-410 Series

Bulletin No. 2080

Portable surface roughness tester evolution

Rich choice of options provide easier, smoother and more accurate
measurements
 Portable surface roughness tester evolves!
The large touch-screen, color-graphic LCD ensures both intuitive control and advanced operability

Enhanced power for making measurements on site Applicable standards

Color-graphic LCD Backlight provided Complies with many industry standards
The color-graphic LCD with excellent visibility A backlight improves usability in dim testing The Surftest SJ-410 complies with the
displays calculated results and assessed environments. following standards: JIS (JIS-B0601-2001,
profiles even clearer. This is really useful for JIS-B0601-1994, JIS B0601-1982), VDA, ISO-
checking results without printing them out. 1997, and ANSI.
Touch screen for easier operations
The screen display can be switched between icon display and text display.
Successfully combining operability with utility and usability.

Icon display Text display

Easy to use and highly functional

This portable surface roughness tester is equipped with analysis
functionality rivaling that of benchtop surface roughness testers.

Data compensation
Simple contour analysis function

Multilingual support High accuracy measuring

The display interface supports 16 languages. A wide range, high-resolution detector
Measuring range/ resolution
800µm/ 0.01µm
80µm / 0.001µm
8µm / 0.0001µm

High straightness SJ-412

drive unit
Straightness/ traverse length
0.3µm / 25mm (SJ-411)
0.5µm / 50mm (SJ-412)

SJ-411

2
 Surftest SJ- 410
Interfaces Data storage
A variety of interfaces supplied as standard Memory card (optional) is supported
The external device interfaces that come as standard include USB, RS- The measurement conditions and data can be stored in a memory card
232C, SPC output and footswitch I/F. (optional) and recalled as required. This enables batch analysis and
printout of data after on-site measurement.

•Measurement condition
Internal memory: 10 sets
Memory card: 500 sets
•Measurement result
Memory card: 1000 sets

Password protection
Access to functions can be restricted by a password
A pre-registered password can limit use of measurement conditions
and other settings to the tester’s administrator.

Carrying case
The unit is easily transported in a dedicated carrying case
Key-sheet buttons which includes holders for the accessories as well as the
tester itself. (Standard accessory.)
A sturdy key-sheet-button panel with superior durability in any en-
vironment is provided. For repeat measurement of the same work,
simply pressing the start switch can complete measurement,
analysis and printout.

Printer
High-speed printer prints out measurement results on site
A high-quality, high-speed thermal printer prints out measurement results.
It can also print a BAC curve or an ADC curve as well as calculated
results and assessed profiles. These results and profiles are printed out
in landscape format, just as they appear on the color-graphic LCD.

3
 Enhanced measuring functions

Your choice of skidless or skidded measurement Patent registered in Japan, U.S.A.. Patent pending in Germany

•Skidless measurement •Skidded measurement

Skidless measurement is where surface features are measured relative In skidded measurements, surface features are measured with reference
to the drive unit reference surface. This measures waviness and finely to a skid following close behind the stylus. This cannot measure
stepped features accurately, in addition to surface roughnness, but waviness and stepped features exactly but the range of movement
range is limited to the stylus travel available. The SJ-410 series supports within which measurement can be made is greater because the skid
Traverse direction
a variety of surface feature measurements simply by replacing the tracks the workpiece surface contour.
stylus. Traverse direction Traverse direction
Detector Traverse direction Detector Traverse direction
Fulcrum point of Skid

Stylus Fulcrum point of Stylus Skid Stylus Fulcrum point of Stylus

Measuring example of stepped Measured profile Measuring example of stepped Measured profile
features: Skidless features: Skidded

Powerful support for leveling Patent registered in Japan, U.S.A.. Patent pending in Germany

The height/tilt adjustment unit comes as standard for leveling the drive unit prior to making skidless measurements and, supported by guidance from
the unique D.A.T. function, makes it easy to achieve highly accurate alignment.

• Height/tilt adjustment unit (Standard accessory)

Height adjustment knob

Preliminary measurement Amount of tilt adjustment

With Preliminary DAT screen

DAT measurement (adjustmentamount)
Height/tilt adjustment unit Tilt adjustment knob
Final measurement
Without Preliminary Intuitive adjustment
DAT measurement using the tilt adjustment knob OK
NG
Repeat

When the SJ-410 Series detector is mounted on the manual column stand*1 for measurement, it can be combined with any of the optional products for easier
leveling: leveling table*1, 3-axis alignment table*1 or tilt adjustment unit*1.
*1: For details about optional products, see P6-7.

4
 More measuring functions than expected from a compact tester
Usually, a spherical or cylindrical surface (R-surface) cannot be evaluated, but, by removing
the radius with a filter, R-surface data is processed as if taken from a flat surface.

R-Surface
compensation

Recalculating Assessing a single measurement result under

two different evaluation conditions
Previously measured data can be recalculated for use in other
evaluations by changing the current standard, assessed profile and A single measurement enables simultaneous analysis under two
roughness parameters. different evaluation conditions. A single measurement allows calculation
of parameters and analysis of assessed profiles without the need for
recalculation after saving data, contributing to higher work efficiency.
GO/NG judgement function
An “OK/NG” judgment symbol is displayed when limits are set for
the roughness parameter. In case of “NG,” the calculated result
is highlighted. The calculated result can also be printed out.

Arbitrary sampling length setting

The “OK” symbol means the measurement
is within the limits set; “NG” means it is not, This function allows a sampling length to be arbitrarily set in 0.01mm
in which case an arrow points to either the increments (SJ-411: 0.1mm to 25mm, SJ-412: 0.1mm to 50mm).
upper or lower limit in the printout.
It also allows the SJ-410 series to make both narrow and wide range
measurements.
Narrow space measuring function Patent pending in Japan

Surface roughness measurement requires a run-up distance before

Simple contour analysis function
starting the measurement (or retrieving data). When the SJ-410 Point group data collected for surface roughness evaluation is used
Series measures, its run-up distance is normally set to 0.5mm. This to perform simplified contour analysis (step, step height, area and
distance, however, can be shortened to 0.15mm using the narrow coordinate variation). It assesses minute forms that cannot be assessed
part measurement function (starting from the origin point of the drive by a contour measurer.
unit). The function extends the possibility of measurement of narrow
locations such as grooves in piston ring / O-ring mounts.
•Narrow space measuring Typical applications
The run-up distance can Example: surface roughness measuring Example: surface roughness measuring
be shortened to 0.15mm of piston-ring groove of mounting groove for O-ring
by measuring from the Evaluation length Evaluation length
origin point. c=2.5mm ø1.2 c=0.8mm
1 sampling length 1 sampling length
Run up for narrow parts 0.5 2.5 Workpiece
1.8

: 0.15mm
0.1 Stylus
Normal run up: 0.5mm 1.3
0.5

3.5 Overruns surface 2.5 Step Step volume

using 0.5mm run-up
Run-up of 0.5mm is not
enough for performing
the measurement

Real sampling
This function samples stylus displacement for a specified time
without engaging detector traverse, which enables use as a
simplified vibration meter or displacement gage incorporated in
another system.
Dimensions Coordinate difference

5
 Optional Accessories

Simple column stand

Can be adjusted to match the height of the item to be measured.
Dimensions Unit: mm

No.178-039
Vertical adjustment range: 250mm
Dimensions: 400×250×578mm
Mass: 20kg

578
8.5

11
7
15

60
T-groove dimensions
40 120

12
400 250

Options for simple column stand

Three new optional products are available to be attached to the manual column stand (No.178-039). You can choose the unit that suits your application.
Or, you can also use the three products in any combination. Using the optional units makes SJ-411/412 more convenient and easier to use to ensure
accurate measurements.
•Auto-set unit (178-010)* •Tilting adjustment unit (178-030)*
This unit enables the vertical (Z axis) direction to be positioned This unit is used for aligning the workpiece surface with the detector
automatically (auto-set function). reference plane. It supports the DAT function to make the leveling of
A single button operation completes a series of operations from workpiece surfaces easier.
measurement, saving and auto-return (saving and auto-return can be Preliminary measurement
switched on and off by operating the drive unit).

±1.5°
10mm

•X-axis adjustment unit (178-020)* Tilt adjustment

This unit helps fine-tune the horizontal (X axis) direction.
Complete set of optional
units for the manual
column stand
Tilting adjustment unit
Auto-set unit

12.5mm 12.5mm X-axis adjustment unit

*Cannot be used when the tester’s main

unit is an older model (SJ-401/402).

6
 3-axis Adjustment Table: 178-047 Patent registered in Japan, U.S.A.. Patent pending in Germany

This table helps make the alignment adjustments required when measuring cylindrical surfaces. The corrections for the pitch angle and the swivel angle
are determined from a preliminary measurement and the Digimatic micrometers are adjusted accordingly. A flat-surfaced workpiece can also be leveled
with this table.
Aligned Not aligned
Traverse direction Traverse direction End point
End point

Axial line Axial line

Start point
Start point

Recorded profiles

DAT Function for the optional leveling table Patent registered in Japan, U.S.A.. Patent pending in Germany

The levelling table can be used to align the surface to be tested with the detector reference plane. The operator is guided through the procedure by
screen prompts.
DAT screen guides the
user when leveling
Digimatic micrometer
head
Amount of micrometer
head adjustment required
No.178-048 Leveling table (DAT)
Inclination adjustment angle: ±1.5°
Table dimensions: 130×100mm (Option)
Maximum load: 15kg

XY leveling tables Precision vise

The tester includes X- and Y-axes micrometer •Movement is in X- and Y-axes only. •Fits on the stand.
heads. This makes axis alignment much
easier because the tilt adjustment center is
the same as the rotation center of the table.
(Code No.178-042-1/178-043-1) Application
178-042-1 178-049

178-042-1(mm) 178-043-1(mm) 178-049(mm)

Order No. 178-052-1(inch) 178-053-1(inch) 178-058(inch/mm)
*with digital heads*with analog heads *with digital heads
Table dimensions 130×100mm
Maximum load 15kg •T-groove dimensions
Inclination adjustment angle ±1.5° — 7
Order No. 178-019
Swiveling angle ±3° — Clamping method Sliding jaws
4

X/Y-axis travel range ±12.5mm ±12.5mm ±12.5mm Jaw opening 36mm

Resolution 0.001mm 0.01mm 0.001mm Jaw width 44mm
3

Dimensions (WxDxH) 262×233×83mm 220×189×83mm 262×233×55mm 13 Jaw depth 16mm

Mass 6.3kg 6kg 5kg Unit: mm Height 38mm

Cylinder attachment Reference step specimen

This block can be positioned on top of Used to calibrate detector sensitivity.
cylindrical objects to perform measurements. No.178-611
No.12AAB358 Step nominal values: 2μm/10μm
Diameter: ø15~60mm
Configuration:
•Cylindrical measurement block
•Auxiliary block
•Clamp *Drive unit not included.

7
 Optional Accessories: Detectors / Styli

Detectors Unit: mm Extension rods

11.5 10 60 14 • 12AAG202 Extension rod 50mm
3.1

14
14
3.6
1.3

8
7

4 Skidless nosepiece Detector

12AAB355 • 12AAG203 Extension rod 100mm
Order No. Measuring force
178-396-2 0.75mN ISO-1997 and JIS-2001 compliant detectors
Detectors that comply with previous standards,
178-397-2 4mN for general use, etc. * No more than one extension rod can be connected.

Styli Unit: mm
Standard stylus 44.7
12AAE882 (1μm) *1 Double-length for deep hole *2
0.9 37.7 12AAE898 (2μm) *1
12AAE924 (1μm) 94.7
A 12AAE914 (5μm)
12AAC731 (2μm) *1 0.9 87.7
12AAB403 (5μm) ( ): Tip radius
7.6
5.2

Color
2.4

coding*3 12AAB415 (10μm)

1.2
12AAE883 (250μm) *4

2.4
3
1.8
0.6
Detail-A
90 ( ): Tip radius

For small hole For small hole / Double-length for deep hole *2
0.6 44.4 12AAC732 (2μm) *1 12AAE892 (2μm) *1
12AAB404 (5μm)
0.6 94.4 2
0.4

0.6 37.7 12AAE908 (5μm)

15 12AAB416 (10μm) 0.6 87.7
2.4

0.6 30 ( ): Tip radius

2.4
2.4

0.6
1.6
3.4

( ): Tip radius
1.6

2.4
Detail-A
90
1.2

Detail-A Color
1.2

A
3.4
1.6

A
S 5/1 coding*3

For extra-small hole For small hole *2 *4

0.4 44.2 12AAC733 (2μm) *1 93.8 2 12AAE884 (φ1.6mm)
1.2

37.7 12AAB405 (5μm)

8.9 87.7 ( ): Tip radius
12AAB417 (10μm)
2.4

41
2.5

0.3 ( ): Tip radius

1.2

90
0.6

Color
1.2

2.4

Detail-A A Ball 1.6

S 5/1 coding*3

For ultra-small hole For ultra-small hole *4

0.4 44.2 12AAC734 (2μm) *1 12AAJ662 (φ0.5mm)
37.7 12AAB406 (5μm) Ball 0.5
2.4
0.3

( ): Tip radius
0.8

8.9 12AAB418 (10μm) 8.5

2.4

0.3
2.5

( ): Tip radius
3.1

Detail-A
90
0.8

A 37.7
Detail-A Color
0.6

A 43.8
S 5/1 coding*3

For deep hole (double-length and triple-length) *2 For small slotted hole *2
94.7 144.7 94.4
Color 0.9 87.7 Color 0.9 137.7 0.6
A 0.6 87.7 43.8
coding*3 coding*3 A
45 37.7
7
5.2

7.6
7.6

5.2

1.6

0.3

7
2.4

2.4

1.2 1.2 0.6

0.4

Detail-A 90 Detail-A Ball 0.5

90
0.3

1.2

2.4

Detail-A A
2X stylus 3X stylus 12AAE938 (2μm) *1
2.4

12AAC740 (2μm) *1 12AAC741 (2μm) *1 Detail-A A 12AAE940 (5μm)

12AAB413 (5μm) 12AAB414 (5μm) ( ): Tip radius
12AAB425 (10μm) 12AAB426 (10μm)
( ): Tip radius ( ): Tip radius

*1: Tip angle 60° *3 : Tip radius 1μm 2μm 5μm 10μm 250μm
*2: For downward-facing measurement only.
Color coding White Black No color Yellow No notch or color
*4 : Used for calibration, a standard step gauge (No.178-611, option) is also required

8
 Styli Unit: mm
For deep groove (10mm) For deep groove *2 (20mm)
44.7 12AAC735 (2μm) *1 95.2
0.9 37.7 12AAB409 (5μm) 12AAE893 (2μm) *1
A 87.7 12AAE909 (5μm)
12AAB421 (10μm)
( ): Tip radius ( ): Tip radius
14.2

2.4
13

Color 2.4

21.8
5.2
23
coding*3
1.2
Detail-A
90 1.2

For deep groove *2 (20mm) For deep groove *2 45.2

44.7 37.7
37.7
12AAC736 (2μm) *1 (40mm) 2 20mm 12AAE895 (2μm) *1
12AAB408 (5μm) 12AAE911 (5μm)
10mm 12AAB420 (10μm) ( ): Tip radius

2.4
2.4

( ): Tip radius
24.2
23

43.8
42.6
A 2.4
Color

5.2
coding*3 1.2
Detail-A 90
1.2
For deep groove *2 (30mm) For deep groove (30mm) / Double-length for deep hole *2
12AAC737 (2μm) *1 93.8 12AAE894 (2μm) *1
12AAB407 (5μm) 87.7
37.7 12AAE910 (5μm)
40mm
2.4

2.4 12AAB419 (10μm)

45.2 ( ): Tip radius
( ): Tip radius0.9
31.8
33

3
A
5.2

Color
36.5
2.4

coding*3 37.7
24.2

35
23

5.2

Detail-A 1.2 44.7

A
90 1.2
1.2
For gear tooth A 90 For gear tooth / Double-length for deep hole *2
12AAB339 (2μm) *1 93.8 12AAE896 (2μm) *1
43.8 30mm 12AAB410 (5μm) 87.7 12AAE912 (5μm) *1
Color 37.7
12AAB422 (10μm) 20mm 30mm
60

coding*3 ( ): Tip radius

2
6.4

60

( ): Tip radius
7.6

A
2.4

7
6.7
36.5

Detail-A 60 1.2
35

1.2

For rolling circle waviness surface *4 For rolling circle waviness / Double-length for deep hole *2 *4
44.7 12AAB338 (φ1.588) 94.7 12AAE886 (250μm)
0.9 37.7 ( ): Tip radius 0.9 87.7 ( ): Tip radius
5.2
7.6

2.4
2.4

Ball 1.588
1.2
1.2 2
7.6
6.4
5.2

For knife-edge *4 For corner hole / Double-length for deep hole *2

44.7 12AAC738 (2μm) *1 93.8 12AAE897 (2μm) *1
0.9 37.7 12AAB411 (5μm) 12AAE913 (5μm) *2
A 87.7
Color 12AAB423 (10μm) 35
2 ( ): Tip radius
coding*3
7.6

( ): Tip radius
2.4

1.2
45

90
2.4
1.6

Detail-A
5.8
5

0.8

For eccentric arm *2 45.2 For hole bottom

10 12AAC739 (2μm) *1
2.4

1.4 37.7 44.3 12AAE899 (2μm) *1

A 12AAB412 (5μm) 0.5 37.7 2 12AAE915 (5μm)
7.6

12AAB424 (10μm) ( ): Tip radius

1.2
2.4

Color ( ): Tip radius

7.4
6.2

coding*3 90
5

2.4
1

Detail-A

*1: Tip angle 60° *3 : Tip radius 2μm 5μm 10μm

*2: For downward-facing measurement only.
Color coding Black No color Yellow
❈Customized special interchageable styli are available on request,
Please contact any Mitutoyo office for more information. *4 : Used for calibration, a standard step gauge (No.178-611, option) is also required
45.2
2.4

0.9
10
A
37.7 9
7.6

.4
 Optional Accessories: For External Output

Contour / Roughness analysis software Simplified communication program for

FORMTRACEPAK SURFTEST SJ series
More advanced analysis can be performed by loading SJ-410 series The Surftest SJ-410 series has a USB interface, enabling data to be
measurement data to software program FORMTRACEPAK via a transferred to a spreadsheet or other software.
memory card (option) for processing back at base. We also provide a program that lets you create inspection record
tables using a Microsoft Excel* macro.
This program can be downloaded free of charge from the Mitutoyo website.
http://www.mitutoyo.co.jp

Required environment*
SJ-410 FORMTRACEPAK • OS: Windows XP-SP3 • Spreadsheet software: Microsoft Excel 2002
Windows Vista Microsoft Excel 2003
Windows 7 Microsoft Excel 2007
Microsoft Excel 2010
*Windows OS and Microsoft Excel are products of Microsoft Corporation.
Digimatic mini processor DP-1VR The optional USB cable is also required.
By connecting this printer to the Surftest SJ-410's digimatic output, • USB cable for SJ-410 series No.12AAD510
you can print calculation results, perform a variety of statistical
analyses, draw a histogram or D chart, and also perform complicated
operations for X-R control charts. Calculation results input unit INPUT TOOL
No.264-504 -5A This unit allows you to load Surftest SJ-410 calculation results (SPC
output) into commercial spreadsheet software on a PC via a USB
connector. You can essentially use a one-touch operation to enter
the calculation results (values) into the cells in the spreadsheet
software.

SJ-410 → DP-1VR Connecting cable

1m: No.936937
2m: No.965014

Measurement Data Wireless Communication System U-WAVE USB-ITN-D USB keyboard signal conversion type*
No.06ADV380D IT-012U
This unit allows you to remotely load Surftest SJ-410 calculation No.264-012-10
results (SPC output) into commercial spreadsheet software on a PC. *Requires the optional Surftest SJ-410
You can essentially use a one-touch operation to enter the connection cable.
calculation results (values) into the cells in the spreadsheet 1m: No.936937
software. 2m: No.965014

Optional accessories, consumables, and

others for SJ-410
U-WAVE-R U-WAVE-T * • Printer paper (5 rolls) No.270732
(Connects to the PC) (Connects to the SJ-410) • Durable printer paper (5 rolls) No.12AAA876
No.02AZD810D No.02AZD880D • Touch-screen protector sheet (10 sheets) No.12AAN040
*Requires the optional Surftest SJ-410 • Memory card (2GB) * No.12AAL069
connection cable.
No.02AZD790D
• Connecting cable (for RS-232C) No.12AAA882
*micro SD card (with a conversion adapter to SD card)

10
 Specifications

Model No. SJ-411 SJ-412

inch/mm 178-581-01A 178-581-02A 178-583-01A 178-583-02A
X axis 25mm (1inch) 50mm (2inch)
Measuring
range Z1 axis (detector unit) 800µm, 80µm, 8µm
*Up to 2,400µm with an optional stylus
Measuring principle Differential inductance
0.01µm (800µm range) / 0.001µm (80µm range) / 0.0001µm (8µm range)
Resolution
0.4µinch (32000µinch) / 0.04µinch (3200µinch) / 0.004µinch (320µinch)
Detector Stylus tip 60°/2µm (80µinch) 90°/ 5µm (200µinch) 60°/ 2µm (80µinch) 90°/ 5µm (200µinch)
Measuring force 0.75mN 4mN 0.75mN 4mN
Radius of skid curvature R40 mm (R1.57")
Measuring method Skidded measurement / skidless measurement
Measuring speed 0.05 , 0.1 , 0.2 , 0.5 , 1.0mm/s (0.002, 0.004, 0.02, 0.04 inch/s)
Drive unit: X-axis Drive speed 0.5 , 1, 2, 5mm/s (0.02, 0.04, 0.08, 0.2 inch/s)
Straightness 0.3µm / 25mm (12µinch/ 1inch) 0.5µm / 50mm (20µinch/ 2inch)
Height-tilt Height adjustment 10mm (0.39inch)
adjustment unit Tilt adjustment ±1.5°
Standards JIS1982 / JIS1994 / JIS2001 / ISO1997 / ANSI / VDA
Ra, Rq, Rz, Ry, Rp, Rv, Rt, R3z, Rsk, Rku, Rc, RPc, RSm, Rmax*1, Rz1max*2, S, HSC, RzJIS*3, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c),
Parameters
Rσc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, λa, λq, Lo, Rpm, tp*4, Htp*4, R, Rx, AR, W, AW, Wx, Wte, Possible Customize
Measured profiles Primary, Roughness, DF, Filtered waviness curve, R-Motif, W-Motif
Graph analysis BAC and ADC curves
Data compensation Parabola/ Hyperbola/ Ellipse/ Circle/ Conic/ Tilting, Compensation off
Filter 2CR, PC75, Gaussian filter
λc 0.08 , 0.25 , 0.8 , 2.5 , 8.0mm
Cut-off length
λs *5 2.5, 8.0, 25mm (100, 320, 1000µinch)
Sample length 0.08 , 0.25 , 0.8 , 2.5 , 8.0 , 25.0mm
Number of sampling lengths ×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10, ×11, ×12, ×13, ×14, ×15, ×16, ×17, ×18, ×19, ×20
Arbitrary length 0.1~25mm 0.1~50mm
Customization Desired parameters can be selected for calculation and display
Simple contour analysis function Step, Step volume, Dimensions, Coordinate difference
DAT function Helps to adjust leveling during skidless measurement
Real sampling function Samples stylus displacement for a specified time without engaging detector traverse.
Statistical processing Static measurement (max. 3 parameters) is possible. Static processing for MAX, MIN, AVERAGE,
standard deviation, histogram and pass rate is possible
GO/ NG judgement*6 Max rule / 16% rule / Average rule / Standard deviation (1σ, 2σ, 3σ)
Functions Storage functions 10 measuring conditions can be stored in internal memory
Measurement conditions / Calculation results / GO / NG judgement result / Calculation results for each sampling length /
Printing function
Measurement curve / BAC / ADC / Environmental setting information
Japanese, English, German, French, Italian, Spanish, Portuguese, Korean,
Display languages
Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian Turkish, Swedish, Dutch
Internal memory: Measurement condition (10 sets)
Storage Memory card (option): 500 measurement condition, 10000 measuring data, 10000 text data, 500 statistic data,
1 backup of machine setting, the last ten traces (Trace 10)
External I/O USB I/F, Digimatic output, RS-232C I/F, External SW I/F
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
Battery *Charging time: about 4 hours (may vary due to ambient temperature)
Power supply *Endurance: about 1500 measurements (differs slightly due to use conditions / environment)
Power consumption 50W
Display unit 275×198×109mm (10.83×4.29×7.80inch)
Size
Height adjustment unit 130.9×63×99mm (5.16×2.48×3.90 inch)
(W×D×H)
Drive unit 128×35.8×46.6mm (5.04×1.41×1.83 inch) 154.5×35.8×46.6mm (6.08×1.41×1.83inch)
Display unit 1.7kg
Mass Height adjustment unit 0.4kg
Drive unit 0.6kg 0.64kg
Detector*7, Stylus*8, Roughness specimen AC adapter, Philips screwdriver,
Standard accessories 270732 Printing paper 12BAG834 Touch pen Strap for stylus pen, Operation manual,
12BAL402 Touch-screen protection sheet 12AAN041 Carrying case Quick reference manual, Warranty
*1: Only for VDA/ANSI/JIS'82 standards.
*2: Only for JIS'97 standard.
*3: Only for JIS'01 standard.
*4: Only for ANSI standard.
*5: λs may not be switchable depending on standard selected.
*6: Standard deviation only can be selected in ANSI.16% rule cannot be selected in VDA.
*7: Either No.178-396-2 or No.178-397-2 is supplied as a standard accessory depending on the Order No. of the main unit for SJ-410 Series.
*8: The standard stylus (No.12AAC731 or No.12AAB403), which is compatible with the detector supplied, is a standard accessory.

11
 Unit: mm
Connecting cable (1.5m)
ø14

63

275 109
35.8

Vertical travel
length
10

99
90
45.8
Tilting range

198
1.5

25.4
50.8 60 15
(0.9) 54 33.5 130.9
219.3 245.8

*The dimensions in parentheses indicate those for SJ-412

Example of mounting on simple column stand. (Code No. 178-039)* Unit: mm

*For details see page 6.

25 50
578

8.5
250

One Number to Serve You Better

11
7

15
1-888-MITUTOYO (1-888-648-8869)
40

T-groove dimensions
60

175 201.5 40
12

120
Measuring range Aurora, Illinois
400 250
(Corporate Headquarters)
*The dimensions in parentheses indicate those for SJ-412
Westford, Massachusetts
Huntersville, North Carolina
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data Mason, Ohio
contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore
Code No.178-039
reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions
Plymouth, Michigan
and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading City of Industry, California
Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require
Birmingham, Alabama
prior approval by an appropriate governing authority.

Trademarks and Registrations

Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies
should be contacted for more complete trademark and registration information.

© 2012 Mitutoyo America Corporation, Aurora IL 2.5M 0612-06 Printed in USA, June 2012 Precision is our Profession