Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 263 views

    Ha 17903

    Uploaded by

    Jaime Soriano Guzman
    HA17903 and HA17393 are comparators designed for car use and control system use. They provide wide voltage range with single power source, and the change of supply current is small, because it is independent of the supply voltage. They can be widely applied, such as limit comparator, simple analog / digital converter, pulse / square wave / time delay generator, wide range VCO, MOS clock timer, multivibrator, high voltage logic gate, etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Ha 17903

    Uploaded by

    Jaime Soriano Guzman
    263 views9 pages
    HA17903 and HA17393 are comparators designed for car use and control system use. They provide wide voltage range with single power source, and the change of supply current is small, because it is independent of the supply voltage. They can be widely applied, such as limit comparator, simple analog / digital converter, pulse / square wave / time delay generator, wide range VCO, MOS clock timer, multivibrator, high voltage logic gate, etc.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    HA17903 and HA17393 are comparators designed for car use and control system use. They provide wide voltage range with single power source, and the change of supply current is small, because it is independent of the supply voltage. They can be widely applied, such as limit comparator, simple analog / digital converter, pulse / square wave / time delay generator, wide range VCO, MOS clock timer, multivibrator, high voltage logic gate, etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    263 views9 pages

    Ha 17903

    Uploaded by

    Jaime Soriano Guzman
    HA17903 and HA17393 are comparators designed for car use and control system use. They provide wide voltage range with single power source, and the change of supply current is small, because it is independent of the supply voltage. They can be widely applied, such as limit comparator, simple analog / digital converter, pulse / square wave / time delay generator, wide range VCO, MOS clock timer, multivibrator, high voltage logic gate, etc.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    HA17903, HA17393 Series

    Dual Comparator

    ADE-204-048 (Z) Rev. 0 Dec. 2000 Description


    HA17903 and HA17393 are comparators designed for car use and control system use. They provide wide voltage range with single power source, and the change of supply current is small, because it is independent of the supply voltage. They can be widely applied, such as limit comparator, simple analog/digital converter, pulse/square wave/time delay generator, wide range VCO, MOS clock timer, multivibrator, high voltage logic gate, etc.

    Features
    Wide supply voltage: 2 to 36V Very low supply current: 0.8mA Small input bias: 25nA Small input offset current: 3nA Small input offset voltage: 2mV Common mode input voltage range including ground. Small output saturation voltage: 1mV (5A) 70mV (1mA) Output voltage is compatible with CMOS logic system.

    Ordering Information
    Type No. HA17903PSJ HA17903FPJ HA17903FPK HA17903PS HA17903FP HA17393 HA17393F Commercial use Industrial use Application Car use Package DP-8 FP-8D FP-8D DP-8 FP-8D DP-8 FP-8D

    HA17903, HA17393 Series


    Pin Arrangement

    Vout1

    1 1 + 2 +

    VCC Vout2

    Vin()1

    Vin(+)1

    Vin()2

    GND

    4 (Top View)

    Vin(+)2

    Circuit Schematic (1/2)


    VCC

    Q2 Vin(+) Q1

    Q3 Q4 Vout Q8 Q7 Q5 Q6

    Vin()

    HA17903, HA17393 Series


    Absolute Maximum Ratings (Ta = 25C)
    Ratings Item Supply voltage Dfferential input voltage Input voltage Output short current Power dissipation Operating temperature Storage temperature Note: Symbol VCC VIN(diff)
    HA17903 PS HA17903 PSJ HA17903 FP HA17903 FPJ HA17903 FPK HA17393 HA17393 F

    Unit V V

    36 VCC

    36 VCC

    36 VCC

    36 VCC

    36 VCC

    36 VCC

    36 VCC

    VIN l OS*3

    0.3 to + VCC constant

    0.3 to + VCC constant

    0.3 to + VCC constant

    0.3 to + VCC constant

    0.3 to + VCC constant

    0.3 to + VCC constant

    0.3 to + VCC constant

    PT Topr Tstg

    570* 1 20 to +75 55 to +125

    570* 1 40 to +85 55 to +125

    385* 2 20 to +75 55 to +125

    385* 1 40 to +85 55 to +125

    385* 2 40 to +125 55 to +150

    570* 1 20 to +75 55 to +125

    385* 2 20 to +75 55 to +125

    mW C C

    1. These are the allowable values up to Ta = 55 C. Derate by 8.3mW/C above that temperature. 2. These are the allowable values up to Ta = 45 C mounting on 30% wiring density glass epoxy board. Derate by 7.14mW/C above that temperature. 3. Short circuit between the output and VCC will be a cause to destory the circuit. The maximum output current is about 20mA for any supply voltage.

    HA17903, HA17393 Series


    Electrical Characteristics-1 (VCC = 5V, Ta = 25C)
    Item Input offset voltage* Input bias current*
    2 1

    Symbol VIO I IB I IO VCM+ VCM

    Min 3.5 6

    Typ 2.0 25 3 0.8 200 1.3 300 16 0.1

    Max 5.0 250 50 0 2.0 400

    Unit mV nA nA V V mA V/mV s ns mA mA nA

    Test condition

    I IN (+) or IIN () | IIN (+) I IN () |

    Input offset current Common mode input voltage* 3

    Supply current Voltage gain Response time*


    4

    I CC AVD tR t RI Iosink VO (sat) I LO

    All comparators: RL = , All channels on VCC = 15V, RL 15k VRL = 5V, RL = 5.1k VIN = TTL Threshold width, VREF = 1.4V VIN () 1V, VIN (+) = 0, VO 1.5V VIN () 1V, VIN (+) = 0, Iosink = 4mA VIN () = 0, VIN (+) 1V, VO = 5V

    Large signal response time Out put sink current Output saturation voltage Output leak current Notes: 1. 2. 3. 4.

    VREF = 1.4V and RS = 50, when VO = 1.4V at output switching point. Under linear operation. Common mode input voltage or each one of the input signal should not be less than 0.3V. This is a value to 100mV input step voltage with 5mV over drive.

    Electrical Characteristics-2 (VCC = 5V, Ta = 40 to +125C)


    Item Input offset voltage* Input offset current Input bias current Common mode input voltage Output saturation voltage Output leak current Supply current Note:
    1

    Symbol VIO I IO I IB VCM VO (sat) I LO I CC

    Min 0

    Typ 1.0

    Max 5.0 200 500 VCC 2.0 440 4.0

    Unit mV nA nA V mV A mA

    Test condition | IIN (+) I IN () | Output linear range

    VIN () 1V, VIN (+) = 0, Iosink 4mA VIN () = 0, VIN (+) 1 V, VO = 30V All comparators: RL = , All channels on

    1. VREF = 1.4V and RS = 50, when VO = 1.4V at the output switching point.

    HA17903, HA17393 Series


    Characteristics Curve
    Supply Current vs. Ambient Temperature 1.25 Output Sink Current Iosink (mA) Supply Current ICC (mA) Output Sink Current vs. Ambient Temperature 20

    1.0

    VC

    = 36

    15

    VCC = 36 V 15 V 5V

    0.75

    15 V
    5V

    10
    2V

    0.5

    2V

    0.25

    0 20

    25

    50

    75

    0 20

    25

    50

    75

    Ambient Temperature Ta (C)

    Ambient Temperature Ta (C)

    Output Sink Current vs. Output Voltage 25 Output Sink Current Iosink (mA)

    Output Saturation Voltage vs. Ambient Temperature Output Saturation Voltage VO(sat) (mV) 400

    20
    V CC =

    36 V

    300

    15

    15 V 5V
    2V

    200

    10

    100

    VCC = 2 V

    5V

    15 V

    36 V

    10

    20

    30

    40

    0 20

    25

    50

    75

    Output Voltage VO (V)

    Ambient Temperature Ta (C)

    HA17903, HA17393 Series


    Voltage Gain vs. Ambient Temperature 110 Input Offset Voltage VIO (mV)
    VCC = 15 V 5V

    Input Offset Voltage vs. Ambient Temperature 4


    VCC = 36 V 15 V 5V

    Voltage Gain AVD (dB)

    100

    36 V 2V

    90

    2V

    80

    70 20

    25

    50

    75

    4 20

    25

    50

    75

    Ambient Temperature Ta (C)

    Ambient Temperature Ta (C)

    Input Bias Current vs. Ambient Temperature 80 Input Bias Current IIB (nA) 4

    Response Time vs. Ambient Temperature

    Response Time tR (s)

    60

    VCC = 36 V 15 V 5V

    40

    2V

    20

    VCC = 2 V 5V 15 V 36 V

    10

    0 20

    25

    50

    75

    0 20

    25

    50

    75

    Ambient Temperature Ta (C)

    Ambient Temperature Ta (C)

    HA17903, HA17393 Series


    Package Dimensions
    Unit: mm
    9.6 10.6 Max 8 5
    6.3 7.4 Max

    1 0.89

    4 1.3
    2.54 Min 5.06 Max

    1.27 Max

    7.62

    0.1 Min

    0.25 0.05 0 15
    Hitachi Code JEDEC EIAJ Mass (reference value)

    + 0.10

    2.54 0.25

    0.48 0.10

    DP-8 Conforms Conforms 0.54 g

    Unit: mm
    4.85 5.25 Max 5 8
    4.4

    4
    *0.22 0.05 0.20 0.04 2.03 Max

    0.75 Max

    0.25 6.50 + 0.15

    1.05 0 8

    0.10 0.10

    1.27 *0.42 0.08 0.40 0.06

    0.25 0.60 + 0.18

    0.15 0.12 M
    *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Mass (reference value) FP-8D Conforms 0.10 g

    HA17903, HA17393 Series


    Cautions
    1. Hitachi neither warrants nor grants licenses of any rights of Hitachis or any third partys patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third partys rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachis sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachis sales office for any questions regarding this document or Hitachi semiconductor products.

    Hitachi, Ltd.
    Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109

    URL

    NorthAmerica Europe Asia Japan

    : : : :

    http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm


    Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk

    For further information write to:


    Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160

    Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.


    Colophon 2.0

    This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.

    You might also like