TK 7302

VHF FM TRANSCEIVER
TK-7302/7302(V)
TK-7302H/7302H(V)
CONNECTION CABLE
KCT-60
SERVICE MANUAL © 2009-9 PRINTED IN JAPAN
B51-8886-00 (N) 000
Modular jack Key top Panel assy Badge

(E58-0535-05) (K29-9448-01) (A62-1171-03) (B43-1629-04)
CONTENTS
GENERAL.....................................................2 ADJUSTMENT ..........................................28
SYSTEM SET-UP .........................................4 TERMINAL FUNCTION .............................34
REALIGNMENT ...........................................4 PC BOARD
INSTALLATION............................................6 DISPLAY UNIT (X54-3670-20) ...............36
DISASSEMBLY FOR REPAIR ......................8 TX-RX UNIT (X57-7680-XX)..................38
CIRCUIT DESCRIPTION ............................10 SCHEMATIC DIAGRAM ............................42
SEMICONDUCTOR DATA .........................15 BLOCK DIAGRAM .....................................48
COMPONENTS DESCRIPTION.................16 LEVEL DIAGRAM ......................................50
PARTS LIST ...............................................17 OPTIONAL ACCESSORIES
EXPLODED VIEW ......................................26 KCT-60 (CONNECTION CABLE) ............51
PACKING....................................................27 SPECIFICATIONS ...................BACK COVER
This product complies with the RoHS directive for the European market. This product uses Lead Free solder.
Downloaded from www.Manualslib.com manuals search engine

TK-7302/7302(V)/7302H/7302H(V)
Document Copyrights Disclaimer

Copyright 2009 by Kenwood Corporation. All rights re- While every precaution has been taken in the preparation
served. of this manual, Kenwood assumes no responsibility for er-
No part of this manual may be reproduced, translated, rors or omissions. Neither is any liability assumed for dam-
distributed, or transmitted in any form or by any means, ages resulting from the use of the information contained
electronic, mechanical, photocopying, recording, or other- herein. Kenwood reserves the right to make changes to any
wise, for any purpose without the prior written permission products herein at any time for improvement purposes.
of Kenwood.
GENERAL
INTRODUCTION PRE-INSTALLATION CONSIDERATIONS
SCOPE OF THIS MANUAL 1. UNPACKING
This manual is intended for use by experienced techni- Unpack the radio from its shipping container and check
cians familiar with similar types of commercial grade com- for accessory items. If any item is missing, please contact
munications equipment. It contains all required service KENWOOD immediately.
information for the equipment and is current as of this pub-
lication date. Changes which may occur after publication 2. LICENSING REQUIREMENTS
are covered by either Service Bulletins or Manual Revisions, Federal regulations require a station license for each
which are issued as required. radio installation (mobile or base) be obtained by the equip-
ment owner. The licensee is responsible for ensuring trans-
ORDERING REPLACEMENT PARTS mitter power, frequency, and deviation are within the limits
permitted by the station license.
When ordering replacement parts or equipment informa-
Transmitter adjustments may be performed only by a
tion, the full part identification number should be included.
licensed technician holding an FCC first, second or general
This applies to all parts : components, kits, and chassis. If
class commercial radiotelephone operator’s license. There is
the part number is not known, include the chassis or kit
no license required to install or operate the radio.
number of which it is a part and a sufficient description of
the required component for proper identification.
3. PRE-INSTALLATION CHECKOUT
3-1. Introduction
PERSONNEL SAFETY Each radio is adjusted and tested before shipment. How-
The following precautions are recommended for person- ever, it is recommended that receiver and transmitter opera-
nel safety : tion be checked for proper operation before installation.
• DO NOT transmit if someone is within two feet (0.6 me-
ter) of the antenna. 3-2. Testing
• DO NOT transmit until all RF connectors are secure and The radio should be tested complete with all cabling and
any open connectors are properly terminated. accessories as they will be connected in the final installa-
• SHUT OFF this equipment when near electrical blasting tion. Transmitter frequency, deviation, and power output
caps or while in an explosive atmosphere. should be checked, as should receiver sensitivity, squelch
• All equipment should be properly grounded before pow- operation, and audio output. Signalling equipment operation
er-up for safe operation. should be verified.
• This equipment should be serviced by only qualified
technicians.

TK-7302/7302(V)/7302H/7302H(V)
GENERAL
4. PLANNING THE INSTALLATION 5. INSTALLATION PLANNING – CONTROL STATIONS
4-1. General 5-1. Antenna system
Inspect the vehicle and determine how and where the Control station. The antenna system selection depends
radio antenna and accessories will be mounted. on many factors and is beyond the scope of this manual.
Plan cable runs for protection against pinching or crush- Your KENWOOD dealer can help you select an antenna sys-
ing wiring, and radio installation to prevent overheating. tem that will best serve your particular needs.
4-2. Antenna 5-2. Radio location

The favored location for an antenna is in the center of a Select a convenient location for your control station radio
large, flat conductive area, usually at the roof center. The which is as close as practical to the antenna cable entry
trunk lid is preferred, bond the trunk lid and vehicle chassis point. Secondly, use your system’s power supply (which
using ground straps to ensure the lid is at chassis ground. supplies the voltage and current required for your system).
Make sure sufficient air can flow around the radio and pow-
4-3. Radio er supply to allow adequate cooling.
The universal mount bracket allows the radio to be
mounted in a variety of ways. Be sure the mounting surface SERVICE
is adequate to support the radio’s weight. Allow sufficient
This radio is designed for easy servicing. Refer to the
space around the radio for air cooling. Position the radio
schematic diagrams, printed circuit board views, and align-
close enough to the vehicle operator to permit easy access
ment procedures contained in this manual.
to the controls when driving.
4-4. DC Power and wiring NOTE

1. This radio may be installed in negative ground electrical If you do not intend to use the 3.5-mm jack for the ex-
systems only. Reverse polarity will cause the cable fuse ternal speaker, fit the supplied speaker-jack cap to stop dust
to blow. Check the vehicle ground polarity before instal- and sand from getting in.
lation to prevent wasted time and effort.
2. Connect the positive power lead directly to the vehicle
battery positive terminal. Connecting the Positive lead ACC.
to any other positive voltage source in the vehicle is not
recommended.
3. Connect the ground lead directly to the battery negative
terminal.
4. The cable provided with the radio is sufficient to handle Antenna Speaker
the maximum radio current demand. If the cable must be connector jack cap
extended, be sure the additional wire is sufficient for the
current to be carried and length of the added lead.
Power input
connector

TK-7302/7302(V)/7302H/7302H(V)
SYSTEM SET-UP
Merchandise received
Frequency range (MHz) RF power Type
License and frequency allocated by FCC 136~174 25W TK-7302/7302(V) M/K
136~174 50W TK-7302H K,M
Choose the type of transceiver 136~174 50W TK-7302H(V) K
Transceiver programming See page 4.

A personal computer, programming interface (KPG-46/46A), and
programming software (KPG-124D) are required for programming.
KCT-60 (Option)
Connection cable
See page 6.
KCT-36
Extension cable (Option)
(Option) (Option) (Option)
KES-3 KCT-18 KES-5
External speaker Ignition sense cable External speaker
See page 7. See page 7. See page 7.
Delivery
REALIGNMENT
1. Modes 2. How to Enter Each Mode
Mode Operation
User mode User mode Power ON
PC mode Received commands from PC
PC mode PC programming mode
Clone mode [ ]+Power ON (Two seconds)
Clone mode PC test mode PC tuning mode
3. PC Mode
Mode Function
3-1. Preface
User mode For normal use. The transceiver is programmed using a personal com-
PC mode
Used for communication between the trans- puter, a programming interface (KPG-46/46A), USB adapter
ceiver and PC. (KCT-53U) and FPU (programming software).
PC programming Used to read and write frequency data and The programming software can be used with a PC. Fig-
mode other features to and from the transceiver. ure 1 shows the setup of a PC for programming.
Used to check the transceiver using the PC.
PC test mode
This feature is included in the FPU. 3-2. Connection procedure
PC tuning mode Used to tune the transceiver using the PC. 1. Connect the transceiver to the computer using the inter-
face cable and USB adapter (When the interface cable is
Used to transfer programming data from one
Clone mode KPG-46A, the KCT-53U can be used.).
transceiver to another.

TK-7302/7302(V)/7302H/7302H(V)
REALIGNMENT
Note: PC
• You must install the KCT-53U driver in the computer to KPG-46 or KPG-46A or
use the USB adapter (KCT-53U). KPG-46A + KCT-53U +
• When using the USB adapter (KCT-53U) for the first time, Tuning cable
plug the KCT-53U into a USB port on the computer with (E30-3383-05)
the computer power ON.
2. When the Power is switched on, user mode can be en-

tered immediately. When the PC sends a command, the
transceiver enters PC mode, and “Pc” is displayed on
the LCD.
When data is transmitting from the transceiver, the red
LED blinks.
When data is receiving by the transceiver, the green LED FPU
blinks.
Note: PC PC PC
The data stored in the computer must match the “Model D-SUB D-SUB
USB
Name” when it is written into the EEPROM. (25-pin) (9-pin)
KCT-53U
KPG-46 KPG-46A
3-3. KPG-46/KPG-46A description KPG-46A
(PC programming interface cable: Option) Transceiver Transceiver Transceiver
The KPG-46/46A is required to interface the transceiver
to the computer. It has a circuit in its D-sub connector (KPG-
46: 25-pin, KPG-46A: 9-pin) case that converts the RS-232C Fig. 1
logic level to the TTL level.
The KPG-46/46A connects the 8-pin microphone connec-
tor of the transceiver to the RS-232C serial port of the com- 4. Clone Mode
puter. Programming data can be transferred from one trans-
ceiver to another by connecting them via their external uni-
3-4. KCT-53U description (USB adapter: Option) versal connectors. The operation is as follows (the transmit
The KCT-53U is a cable which connects the KPG-46A to transceiver is the source and the receive transceiver is a
a USB port on a computer. target).
When using the KCT-53U, install the supplied CD-ROM
(with driver software) in the computer. The KCT-53U driver Note :
runs under Windows 2000 or XP or Vista (32-bit). Clone mode should be enabled.
3-5. FPU (Programming Software) description 1. Turn the source transceiver power ON with the [ ] key
The FPU is the programming software for the transceiver held down (2 seconds), “CL” is displayed on the LCD.
supplied on a CD-ROM. This software runs under MS-Win- 2. Power on the target transceiver.
dows 2000, XP or Vista (32-bit) on a PC. 3. Connect the cloning cable (No. E30-3382-05) to the mod-
The data can be input to or read from the transceiver and ular microphone jacks on the source and slave.
edited on the screen. The programmed or edited data can 4. Press the [ ] key on the source transceiver.
be printed out. It is also possible to tune the transceiver. The data of the source is sent to the slave. While the
source is sending data, red LED blinked. While the slave
List of FPU for transceiver is receiving the data, “Pc” is displayed and green LED
Model Type FPU blinked. When cloning of data is completed, the source
TK-7302 M KPG-124D(M) displays “En”, and the source red LED turned off, and
the slave automatically operates in the User mode. The
TK-7302(V) K KPG-124D(K)
slave can then be operated by the same program as the
TK-7302H M KPG-124D(M) source.
TK-7302H K KPG-124D(K) 5. The other slave can be continuously cloned. Carry out
the operation in step 2 to 4.
TK-7302H(V) K KPG-124D(K)

TK-7302/7302(V)/7302H/7302H(V)
REALIGNMENT
4-1. Adding the data password. 4-2. Flow chart (Source transceiver)
If the data password is set in the optional feature menu, Press [ ] key + Power ON for 2 seconds
you must enter the password (Master transceiver) to acti-
vate a clone mode. Is Yes
password*
You can use 0~9 to configure the password. The maxi- set?
* Read
mum length of the password is 6 digits. Authorization No Shows PS
password
1. [ ]+Power ON.
2. “PS” is displayed on the LCD. Input password if
3. If the [ ] and [ ] keys is pressed while “PS” is displayed, password is correct
numbers (0 to 9) are displayed flashing. When you press
the [ ] key, the currently selected number is deter- Clone mode
mined. If you press the [ ] key after entering the pass-
[ ]
word in this procedure, “CL” is displayed if the entered
password is correct. If the password is incorrect, “PS” is Start the clone funnction
redisplayed.
Cloning cable
(E30-3382-05)
Fig. 2
INSTALLATION
1. Connection Cable (KCT-60: Option)
The KCT-60 connection cable kit is used to connect the
transceiver to the KCT-18 (Ignition sense cable), KES-5 (Ex-
ternal speaker), or through the KCT-36 extension cable.
1-1. Installing the KCT-60 (Connection cable) in the

transceiver
1. Remove the ACC. cap on the rear of the transceiver.
2. Connect the D-sub connector of the KCT-60 to the D-sub KCT-60
15-pin terminal of the transceiver.
3. Connect the 15-pin connector of the KCT-60 to a KCT-18,
KES-5, or through a KCT-36 extension cable.
Note: You must setup using the KPG-124D(K) or KPG- KCT-18, KES-5 or
through KCT-36
124D(M). extension cable

TK-7302/7302(V)/7302H/7302H(V)
INSTALLATION
2. Ignition Sense Cable (KCT-18: Option) 3. External Speaker (Option)
The KCT-18 is an optional cable for enabling the ignition 3-1. KES-3
function. The ignition function lets you turn the power to the The KES-3 is an external speaker for the 3.5-mm-diameter
transceiver on and off with the car ignition key. speaker jack.
2-1. Installing the KCT-18 (Ignition sense cable) in ■ Connection procedure

the transceiver 1. Remove the speaker-jack cap on the rear of the trans-
1. Remove the ACC. cap on the rear of the transceiver. ceiver.
2. Connect the D-sub connector of the KCT-60 to the D-sub 2. Connect the KES-3 to the 3.5-mm-diameter speaker jack
15-pin terminal of the transceiver. on the rear of the transceiver.
3. Insert the crimp terminal of the KCT-18 to pin 2 on the
15-pin connector of the KCT-60.
Note: You must setup using the KPG-124D(K) or KPG-

124D(M).
KCT-60
3-2. KES-5
External speaker KES-5 can be installed for KCT-60.
2
Crimp terminal ■ Connection procedure
of the KCT-18 1. Remove the ACC. cap on the rear of the transceiver.
2. Connect the D-sub connector of the KCT-60 to the D-sub
15-pin terminal of the transceiver.
3. Insert two crimp terminals of the KES-5 to pins 3 and 12
on the 15-pin connector of the KCT-60.
Note: You must setup using the KPG-124D(K) or KPG-

124D(M).
KCT-60
Black lead 12
3
Black/White lead

TK-7302/7302(V)/7302H/7302H(V)
DISASSEMBLY FOR REPAIR
1. Disassembly Procedure 4. To remove the speaker holder, first remove the two
screws from the display PCB using a phillips screwdriver.
1. When removing the cabinet, first remove the two screws Then, insert a flat-head screwdriver under the tabs of the
from the right and left with a phillips screwdriver. speaker holder and tilt it in the direction shown by the ar-
Then, hook your finger on the edge of the cabinet and row.
pull it out until it is over the chassis protrusion. Remove Remove the speaker from the front panel by turning it in
the cabinet by prying the cabinet as shown below. the direction indicated, together with the speaker holder
and display PCB.
Cabinet
Speaker
holder
2. To remove the panel assembly, first turn the transceiver

upside down.
Then, insert a flat-head screwdriver into the holes of the
chassis and tilt it in the direction as shown by the arrow.
Display PCB
5. When removing the TX-RX PCB, first remove the top

packing.
Then, remove the solder of the antenna hot pin and posi-
Panel assembly tive terminal of the DC cord.
Remove the 15 screws from the TX-RX PCB, power
module, and audio amp.
Positive terminal
of the DC cord Antenna hot pin
3. Disconnect the flat cable from connector of the panel as-

sembly.
Audio amp
Power module
Flat cable TX-RX PCB

TK-7302/7302(V)/7302H/7302H(V)
DISASSEMBLY FOR REPAIR
6. Pull it out behind the chassis by rotating the bush (e) 2. When mounting the panel assembly, pass the flat cable
of the DC cord 90 degrees in the direction of the arrow through the hole of the chassis as shown below after
after the screw (q) in the negative terminal is removed, connect the flat cable to connector of the panel assem-
and the positive terminal (w) is removed from the chas- bly.
sis.
Panel assembly
:
DC cord
@ Hole of Panel
. the chassis assembly
Chassis
Chassis
3. Fit the panel assembly into the two tabs of the chassis
top side first.
Then, fit the panel assembly into the two tabs of the
chassis bottom side by turning the panel assembly.
2. Precautions for Reassembly

1. When mounting the speaker holder, while suppressing
the speaker rear part (shaded area), fix the four tabs of
the speaker holder into the hollows of the front panel in
order (q, w, e, and r). Then, tighten the two screws
of the display PCB. 3. Correspondence when replacing the
@
Speaker holder
LED (B30-2321-05)
: When replacing the LED (B30-2321-05), cut the leg of
Display PCB the LED to 4mm (0.16 inch) after installing the Collar (J31-
0565-15).
Speaker
rear part
LED
. 4mm (0.16 inch)
Collar

TK-7302/7302(V)/7302H/7302H(V)
CIRCUIT DESCRIPTION
1. Frequency Configuration Item Rating
The receiver utilizes double conversion. The first IF is Nominal center frequency 38.85MHz
38.85MHz and the second IF is 450kHz. The first local oscil- Pass bandwidth ±6.0kHz or more at 3dB
lator signal is supplied from the PLL circuit. 40dB stop bandwidth ±25.0kHz or less
The PLL circuit in the transmitter generates the neces-
sary frequencies. Figure 1 shows the frequencies. Ripple 1.0dB or less
Insertion loss 4.0dB or less
ANT CF 450kHz 75dB (–900kHz); 50dB (+900kHz)
Guaranteed attenuation
1st MCF Spurious: 40dB or more within fo±1MHz
MIX 38.85MHz SP
Terminal impedance 610Ω/ 3.0pF/ Coupling Cap 13.0pF
ANT RF IF SYSTEM AF
SW AMP PA Table 1 Crystal filter (L71-0659-05): XF500
38.4MHz
X2
multiply 2-3. IF Amplifier Circuit
The first IF signal is amplified by Q502, and enters IC500
(FM processing IC). The signal is heterodyned again with
TCXO 19.2MHz
a second local oscillator signal within IC500 to create a
MIC 450kHz second IF signal. The second IF signal is then fed
RX
MIC through a 450kHz ceramic filter (Wide: CF500, Narrow:
POWER RF PLL/VCO AMP
AMP AMP TX CF501) to further eliminate unwanted signals before it is
amplified and demodulated by the quadrature detector with
Fig. 1 Frequency configuration the ceramic discriminator (CD500).
Item Rating
2. Receiver System Nominal center frequency 450kHz
The receiver is a double conversion superheterodyne. 6dB bandwidth ±6.0kHz or more
The frequency configuration is shown in Figure 1.
50dB bandwidth ±12.5kHz or less
2-1. Front-end RF Amplifier Ripple 2.0dB or less
An incoming signal from the antenna is applied to an RF Insertion loss 6.0dB or less
amplifier (Q506) after passing through the transmit/receive Guaranteed attenuation 35.0dB or more within fo±100kHz
switch circuit (D302, D303, D304 and D305) and bandpass
Terminal impedance 2.0kΩ
filter (L517, L518 and varactor diodes: D509, D510).
After the signal is amplified (Q506), the signal is filtered Table 2 Ceramic filter (L72-0993-05): CF500
by the bandpass (L512, L513 and varactor diodes: D506,
D508) to eliminate unwanted signals before it is passed to Item Rating
the first mixer.
Nominal center frequency 450kHz
The voltage of these diodes are controlled by tracking
the MCU (IC702) center frequency of the bandpass filter. 6dB bandwidth ±4.5kHz or more
(See Figure 2) 50dB bandwidth ±10.0kHz or less
Ripple 2.0dB or less
2-2. First Mixer
Insertion loss 6.0dB or less
The signal from the RF amplifier is heterodyned with the
first local oscillator signal from the PLL frequency synthe- Guaranteed attenuation 60.0dB or more within fo±100kHz
sizer circuit at the first mixer (Q504) to create a 38.85MHz Terminal impedance 2.0kΩ
first intermediate frequency (1st IF) signal. The first IF signal
Table 3 Ceramic filter (L72-0959-05): CF501
is then fed through one pair of monolithic crystal filters (MCF:
XF500) to further remove spurious signals. CF500 (Wide)
ANT L513,L512,L511 CF501 (Narrow)

L517,L518 D508,D506
D302,D303 D509,D510 Q506 D505 Q504 XF500 Q502
D304,D305 BPF RF AMP BPF MIX MCF IF AMP
ANT IC500 IC701
SW FM IC system Baseband C
D511, L519 TV X1 Q500

North filter TCXO Doubler
1st local
IC501 TVC & OSC (VCO/PLL) CD500
DC OP AMP APCC
Fig. 2 Receiver System

10

TK-7302/7302(V)/7302H/7302H(V)
CIRCUIT DESCRIPTION
2-4. Wide/Narrow Switching Circuit The electric field strength of the receive signal can be
The Wide port (pin 99) and Narrow port (pin 98) of the known before the SQIN voltage is input to the MCU, and
MCU is used to switch between ceramic filters. When the the scan stop speed is improved.
Wide port is high, the ceramic filter switch diodes (D500,
D501) cause CF500 to turn on to receive a Wide signal. N-REC SQIN
When the Narrow port is high, the ceramic filter switch IC500 IC702
diodes (D500, D501) cause CF501 to turn on to receive a FM IC RSSI RSSI MCU
Narrow signal.
IC500 Fig. 5 Squelch circuit

FM IC System
IF_IN MIX_O 3. Transmitter System
R504 3-1. Outline
Wide
CF500 IC702 The transmitter circuit produces and amplifies the de-
(Wide) pin 99 sired frequency directly. It FM-modulates the carrier signal
R506
by means of a varicap diode.
3-2. Power Amplifier Circuit

CF501 The transmit output signal from the VCO passes through
D500 (Narrow) D501 the transmission/reception selection diode (D719) and am-
plified by Q300. The amplified signal goes to the RF power
module (IC301) through a low-pass filter. The lowpass filter
R505
R507
removes unwanted high-frequency harmonic components,

and the resulting signal goes through the antenna terminal.
Narrow
IC702
pin98 3-3. APC Circuit
Fig. 3 Wide/Narrow switching circuit The automatic transmission power control (APC) circuit
detects part of a final amplifier output with a coupler circuit
2-5. AF Signal System and applies a voltage to IC300. IC300 compares the APC
The detection signal from the FM IC (IC500) goes to the control voltage (PC) generated by the baseband IC (IC701)
baseband IC (IC701) DISC input (pin 16) for characterizing and DC amplifier (IC501) with the detection output voltage.
the signal. IC300 generates the voltage to control IC301 and stabilizes
The AF signal output from IC701 is input to the audio transmission output.
power amplifier (IC705). The AF signal from IC705 switches The APC circuit is configured to protect over current of
between the internal speaker and the speaker jack (J701) Q300 and IC301 due to fluctuations of the load at the anten-
output. na end and to stabilize transmission output at voltage and
temperature variations.
IC500 IC701 IC700 SP ANT
Baseband Q300 IC301 D302~D305
FM IC AF PA
IC
DRIVE RF POWER ANT
D719 LPF
AMP module SW
Fig. 4 AF signal system
APCC
2-6. Squelch Circuit IC701
DC APC Coupler
The detection output from the FM IC (IC500), a voltage AMP control circuit
pin 32
is applied to the MCU (IC702). The MCU controls squelch IC501 IC300
according to the voltage (SQIN) level.
The signal from the RSSI pin of IC500 is monitored. Fig. 7 APC circuit
ANT
MIC IC700 D711,Q705 IC701 Q6 Q9 Q10 Q300 IC301

MIC Baseband TX BUFF RF DRIVE RF POWER
SW
AMP IC VCO AMP AMP AMP module
MIC key TCXO RF

MCU PLL IC
input 19.2MHz AMP
IC702 X1 IC1 Q3
Fig. 6 Transmitter system

11

TK-7302/7302(V)/7302H/7302H(V)
CIRCUIT DESCRIPTION
4. PLL Frequency Synthesizer through a low-pass filter and passed to the VCO to control
the oscillator frequency.
The PLL circuit generates the first local oscillator signal
for reception and the RF signal for transmission.
4-2. VCO Circuit
The operating frequency is generated by Q6 in transmit
4-1. PLL Circuit mode and Q4 in receive mode. The oscillator frequency is
The frequency step of the PLL circuit is 10 or 12.5kHz. controlled by applying the VCO control voltage, obtained
A 19.2MHz reference oscillator signal is divided at IC1 by from the phase comparator to the varactor diodes (D4 and
a fixed counter to produce the 10 or 12.5kHz reference fre- D14 in transmit mode and D5 and D13 in receive mode) and
quency. The voltage controlled oscillator (VCO) output signal assist voltage to the (D6, D8 and D9 in transmit mode and
is buffer amplified by Q9, then multiplied by using a doubler D7, D10 and D11 in receive mode).
and divided by a programmable counter in IC1. The TX/RX pin is set high in receive mode causing Q5 to
The divided signal is compared in phase with the 10 or turn off, and turn Q7 on. The TX/RX pin is set low in trans-
12.5kHz reference signal in the phase comparator in IC1. mit mode. The outputs from Q4 and Q6 are amplified by Q9
The output signal from the phase comparator is filtered and sent to the RF amplifiers.
D6,D8,D9
IC1: PLL IC Q3
Q6 Doubler
TX VCO AMP
1/N Q9
BUFF
LPF AMP
Phase Charge D14,D4
PLL
DATA comparator pump Q4
REF D13,D5 RX VCO
OSC Q5,Q7
1/M T/R SW
IC2 Assist
OP voltage
ASTC AMP
19.2MHz
D7,D10,D11
Fig. 8 PLL circuit
4-3. Unlock Circuit 5. Control Circuit

During reception, the 9RC signal goes high, the 9TC sig-
The MCU carries out the following tasks:
nal goes low, and Q711 turns on. Q713 turns on and a volt-
1) Controls the WIDE, NARROW, TX/RX outputs.
age is applied to the collector (9R). During transmission, the
2) Controls the Baseband IC (IC701).
9RC signal goes low, the 9TC signal goes high and Q712
3) Controls the PLL (IC1).
turns on. Q714 turns on and a voltage is applied to 9T.
4) Controls the display unit.
The MCU in the control unit monitors the PLL (IC1) LD
signal directly. When the PLL is unlocked during transmis-
sion, the PLL LD signal goes low. The MCU detects this IC1
PLL
signal and makes the 9TC signal low. When the 9TC signal
goes low, no voltage is applied to 9T, and no signal is trans-
PLDT
PLCK
PLLE
UL
mitted.
9C
C.DATA
Q713 Q714 BLED R.DATA
9R 9T
SW SW GLED SLK
IC702 IC701
RLED MCU IRQ Baseband IC
Q711 Q712 MBL CSN
SW SW
LECE
LELH
LECL
LECI
9RC 9TC
IC702 LD IC1
MCU PLL IC1
LED driver
PLL lock
: LD “H” Display unit
Fig. 9 Unlock circuit

Fig. 10 Control circuit
12

TK-7302/7302(V)/7302H/7302H(V)
CIRCUIT DESCRIPTION
5-1. Memory Circuit B A S
The transceiver has a 256k-bit EEPROM (IC703). The EE- KMO1
PROM contains adjustment data. The MCU (IC702) controls
the EEPROM through three serial data lines. CH UP r C
KMO2
EEPCK IC702 VOL DN VOL UP CH DN

MCU KMO3
IC702 EEPDI IC703
MCU EEPROM KMI3
EEPWP
KMI2
KMI1
Fig. 11 Memory circuit
5-2. Display Circuit Fig. 13 Key matrix circuit

The MCU (IC702) controls the 7-segment LED Display
and LEDs.
When power is on, the MCU will use the MBL line to 6. Signaling Circuit
control the key backlight LEDs.
6-1. Encode
When the transceiver is busy, the GLED line goes high,
Q1 turns on and the green LED (D23) lights after Q4 turns ■ Low-speed data (QT, DQT)
on. In transmit mode, the RLED line goes high, Q2 and Q8 Low-speed data is output from pin 1 (LSDO) of the MCU
turn on and the red LED (D23) lights. (IC702). The signal passes through a low-pass CR filter. The
BLED will be set high when the function select (FPU set- signal is mixed with the audio signal and goes to the VCO
ting) is on, Q6 turns on and the blue LED (D22) lights. and TCXO (X1) modulation input after signal processing in
The dimmer function is controlled by the switch (Q5). the baseband IC (IC701).
The LED driver (IC1) controls the functions of the 7-segment
LED through the LEDI, LECE, LECL, LELH lines from the ■ High-speed data (2-tone)
MCU. High-speed data (HSD) is output from pin 2 (HSDO) of
the MCU.
LEDM Q5 The signal passes through a low-pass CR filter. TX devia-
SW tion making an adjustment by MCU is applied to the base-
band IC (IC701). The signal is mixed with the audio signal
Display
LEDI 7-segment and goes to the VCO and TCXO.
LECE The RX tone is audio output of baseband IC (IC701) at
IC1
LECL LED the same time to audio power amplifier and then to the
LELH driver speaker.
TCXO
D1~D5 LSDO MOD X1 IC1
Key backlight IC701
QT/DQT Baseband IC TCXO PLL
MBL Q3 Q4 IC702
SW SW MCU VCO
IC702 DTMF/
D23 HSDO MSK MOD
MCU VCO
GLED Q1 Q7 2-TONE
SW SW
Fig. 14 Encode
RLED Q2 Q8
SW SW ■ MSK / DTMF
MSK and DTMF signal is self generated by the baseband
D22 IC (IC701).
BLED Q6
SW The TX deviation adjustment is done by the output gain
of the baseband IC (IC701), and is routed to the VCO. When
Fig. 12 Display circuit encoding MSK/DTMF, the microphone-input signal is muted.
5-3. Key Matrix Circuit 6-2. Decode

The TK-7302 front panel has function keys. Each of them ■ Low-speed data (QT, DQT)
is connected to a cross point of a matrix of the KMI1 to The demodulated signal from the FM IC (IC500) will input
KMO3 ports of the MCU. The KMO1 to KMO3 ports are al- to the baseband IC (IC701) to remove frequencies of 300Hz
ways high, while the KMI1 to KMI3 ports are always low. or more.
The MCU monitors the status of the KMI1 to KMO3 The signal is input to pin 88 (LSDI) of the MCU. The
ports. If the state of one of the ports changes, the MCU as- MCU digitizes this signal, performs processing such as DC
sumes that the key at the matrix point corresponding to that restoration, and decodes the signal.
port has been pressed.
13

TK-7302/7302(V)/7302H/7302H(V)
CIRCUIT DESCRIPTION
■ High-speed data (2-tone) 7. Power Supply Circuit
The demodulated signal from the FM IC (IC500) is am-
When the power switch on the display unit is pressed,
plified by the baseband IC and passes through a high-pass
the power port on the display unit which is connected to
filter to remove frequencies of 3kHz or more. The MCU digi-
port 17 (POWER), goes low, then port 52 (SBC) goes high,
tizes this signal and decodes the signal after receiving the
Q719 turns on, SB switch (Q720) turns on and power (SB) is
signal at pin 87 (HSDI).
supplied to the transceiver.
When the DC power is supplied to the transceiver, the
■ MSK/ DTMF voltage regulator IC (IC707, IC706) and supply into the MCU
The demodulated signal from the FM IC (IC500) will
VDD and reset the voltage detect IC (IC709). IC709 will
input to the baseband IC(IC701), then the baseband IC will
generate signal (RESET) into the reset terminal on the MCU
decode and send the decoded information to the MCU by
(IC702) to carry out a power on reset. Also, MCU (IC702) is
the data line.
checking on port 91 (BATT). If DC power is less than about
The MCU then processes the decoded information.
8.5V, the transceiver is unable to power on.
When the DC power voltage deceases from normal volt-
IC701 REPLAY data
age, the INT voltage detector IC (IC708) will set to high on
Baseband IC DTMF/MSK
IC500 decode data MCU port 18 (INT). If B line becomes less than about 8.5V,
FM IC DTMF/MSK IC702 MCU will send the backup data to EEPROM (IC703) and go
decode LSDI MCU into STOP mode.
QT/DQT This circuit has an overvoltage protection circuit. If a DC
HSDO voltage of 16V or higher is applied to the base of Q710, this
2-TONE voltage turns Q710 on and sets port 18 (INT) to low. As a re-
sult port 78 (SBC) is low, and turns Q719 and Q720 (SB) off.
Fig. 15 Decode
Q720
SB B
SW
Q707
IGN
SW
Q719
IGN
SW
SBC
R792
5M IC707
BATT
AVR
R793
POWER
D715
3.3M IC706 Q710
IC702 AVR SW
MCU
R851
INT
RESET
IC709
AVR
IC708
AVR
R852
POWER
SW
Fig. 16 Power supply circuit
14

TK-7302/7302(V)/7302H/7302H(V)
SEMICONDUCTOR DATA
MCU: TX-RX unit IC702 Pin No. Name I/O Function
Pin No. Name I/O Function 51 9TC O 9T control
1 LSDO O QT/DQT output 52 SBC O SB control
Voice/Beep/5-tone output for modu- 53 3CC O 3C control
2 HSDO O
lation
54 PLPS O Sleep mode function for PLL IC
3 LEDO O LED data
55 KSSW O Kenwood sound switch
4 LECE O LED enable
56 AMP SW O AF AMP (L: enable / H: disable)
5 LECL O LED clock
57 EEPWP O EEPROM write protect
6 E - GND (Only for bus control)
58 EEPDT I/O EEPROM data
7 CNVSS I CNVss for emulator (Hi: boot mode)
59 EEPCK O EEPROM clock
8 LELH O LED latch
60 VCC2 - +3.3V
9 LERE O LED reset
61 SCRSW O Scrambler switch (Audio path)
10 RESET - Reset
62 VSS - GND
11 XOUT - Crystal (19.2MHz)
63 CSN2 O CSN for Vocoder IC
12 VSS - GND
64 TXRX O TX/RX (H: RX / L: TX)
13 XIN - Crystal (19.2 MHz)
65 LEDM O LED dimmer
14 VCC1 - +5V
66 MBL O Pannel and mic key backlight
15 5CC O 5C control
67 NC I
16 MKEY I/O Mic key
68 DST I Destination
17 POWKEY I Power key input
69 REVP I Reverse power
18 INT I uCom stop
70 FWDP I Forward power
19 ASTSW O Assist speed up switch
71 IRQ2 I IRQ for Vocoder IC
20 BEEP O Beep for side tone
72 IGN I Ignition
21~26 FNC8~FNC3 I/O Function P8~P3
73 IRQ1 I Interrupt request for BASEBAND IC
27 FNC2 I/O Function P2 / Open drain port
74 RLED O Red LED for TX
28 FNC1 I/O Function P1 / Open drain port
75 GLED O Green LED for busy
29 ETXD I/O TXD for emulator
76 BLED O Blue LED for reserve
30 ERXD I/O RXD for emulator
77~79 KMO1~KMO3 O Key matrix output 1~3
31 ECLK - SCLK for emulator
80~82 KMI1~KMI3 I Key matrix input 1~3
32 EBSY - BUSY for emulator
83 UL I VCO unlock detect
33 TXD I/O To FPU
84 AF MUTE O AF mute
34 RXD I/O From FPU
85 MIC1MUTE O Internal mic mute
35 HOOK I Hook
86 MIC2 MUTE O External mic mute
36 PTT I PTT
87 HSDI I High speed data input: 5-tone
37 BSFT O Beat shift
88 LSDI I Low speed data input: QT/DQT/ (LTR)
38 LPOSW O Low power switch for reserve
89 TEMP2 I Temperature 2
39 EPM - EPM for emulator
90 TEMP1 I Temperature 1
40 PLLE O PLL IC chip select
91 BATT I Battery voltage
41 PLDT O PLL IC data
92 RSSI I RSSI input
42 PLCK O PLL IC clock
93 SQIN I Squelch input
43 PA O Public address (SP2 H: mute / L: unmute)
94 AVSS - GND
44 ECE - CE for emulator
95 CV I VCO lock voltage
45 CDATA O Command data for BASEBAND IC
96 VREF - +5V
46 RDATA I Reply data for BASEBAND IC
97 AVCC - +5V
47 SCLK O Serial clock for BASEBAND IC
98 NARROW O Wide/Narrow (Hi: Narrow)
48 CSN1 O Chip select for BASEBAND IC
99 WIDE O Wide/Narrow (Hi: Wide)
49 SP MUTE O Speaker mute (SP1 H: mute / L: unmute)
100 HORN O Horn alert
50 9RC O 9R control
15

TK-7302/7302(V)/7302H/7302H(V)
CONPONENTS DESCRIPTION
Display unit (X54-3670-20) Ref. No. Part Name Description
Ref. No. Part Name Description Q510 Transistor Squelch input control switch
IC1 IC LED driver Q511 Transistor Squelch input switch
Q1,2 Transistor TX/BUSY indication LED switch Q701 FET MIC mute switch
Q3,4 Transistor KEY backlight control switch Q702 Transistor MIC mute switch
Q5,9 Transistor LED dimmer control switch Q703 Transistor DET AMP LPF (D-SUB)
Q6 Transistor Indication LED switch Q705 FET Scrambler switch
Q7,8 Transistor TX/BUSY indication LED switch Q707 Transistor Ignition sense control switch
D1~5 LED KEY backlight Q710 Transistor Over voltage detect switch
D20 Diode Voltage protection Q711 Transistor 9R control switch
D22 LED Indication Q712 Transistor 9T control switch
D23 LED TX/BUSY indication Q713 Transistor 9R switch
D33 Zener diode Surge protection Q714 Transistor 9T switch
D37 LED LED display Q715,723 FET SP mute switch
Q717 FET 5C control switch
TX-RX unit (X57-7680-XX) Q718 FET 3.3C control switch
Ref. No. Part Name Description Q719 Transistor SB control switch
IC1 IC PLL IC Q720 FET SB switch
IC2 IC Assist filter Q721 Transistor AF AMP switch
IC300 IC DC AMP (APC) Q722 Transistor Over voltage detect switch
IC301 IC Power module Q724 FET Horn alert switch
IC500 IC FM IC Q725 Transistor Horn alert control switch
IC501 IC RF BPF tuning voltage DC AMP Q728 Transistor RS-232C RXD control
IC700 IC MIC/MOD AMP Q729 Transistor PLL IC clock AMP
IC701 IC BASEBAND IC Q730 Transistor BASEBAND IC clock AMP
IC702 IC MCU Q731,732 Transistor MCU clock AMP
IC703 IC EEPROM D1 Diode PLL unlock detection
IC704 IC Voltage regulator (9V) Variable capaci-
D4,5,13,14 Frequency control (TX/RX VCO)
IC705 IC AF AMP tance diode
IC706,710 IC Voltage regulator (3.3V) Variable capaci-
D6~11 Frequency control (TX/RX VCO)
tance diode
IC707 IC Voltage regulator (5V)
Variable capaci-
IC708 IC Voltage detection (INT) D12 Modulation control (TX VCO)
tance diode
IC709 IC Voltage detection (MCU reset)
D15~17 Diode TX/RX Fin filter switch
Q3 Transistor PLL Fin AMP
D300 Zener diode Voltage protection
Q4 FET RX VCO
D301 Diode TX power control
Q5 FET TX/RX VCO switch
D302~305 Diode ANT switch
Q6 FET TX VCO
D310,311 Zener diode Voltage protection
Q7 Transistor TX/RX VCO switch
D312 Diode Reverse power rectifier
Q8 Transistor Ripple filter
D313,314 Diode Power rectifier
Q9,10 Transistor VCO buffer AMP
D500,501 Diode W/N CF switch
Q11,12 FET Assist filter control switch D506, Variable capaci-
RF BPF tuning
Q300 Transistor TX drive AMP D508~510 tance diode
Q500 Transistor RX 2nd local doubler AMP D700~710 Diode Surge protection
Q501 Transistor Discriminator control switch D711,712 Diode MIC AMP AGC detection
Q502 Transistor IF AMP D715 Zener diode Voltage protection
Q504 FET RX 1st mixer D717 Surge absorber Voltage protection
Q506 FET Front-end LNA D718 Diode Voltage protection
Q507 Transistor Discriminator control switch D719,720 Diode TX/RX band switch
16

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
CAPACITORS
CC 45 TH 1H 220 J • Capacitor value
CC45
1 2 3 4 5 6 Color* 010 = 1pF 2 2 0 = 22pF
1 = Type ... ceramic, electrolytic, etc. 4 = Voltage rating 100 = 10pF
2 = Shape ... round, square, etc. 5 = Value 101 = 100pF Multiplier
3 = Temp. coefficient 6 = Tolerance 102 = 1000pF = 0.001μF 2nd number
103 = 0.01μF 1st number
• Temperature coefficient
1st Word C L P R S T U 2nd Word G H J K L
Color* Black Red Orange Yellow Green Blue Violet ppm/°C ±30 ±60 ±120 ±250 ±500
ppm/°C 0 –80 –150 –220 –330 –470 –750 Example : CC45TH = –470±60ppm/°C
• Tolerance (More than 10pF) (Less than 10pF)

Code C D G J K M X Z P No code Code B C D F G
(%) ±0.25 ±0.5 ±2 ±5 ±10 ±20 +40 +80 +100 More than 10μF : –10~+50 (pF) ±0.1 ±0.25 ±0.5 ±1 ±2
–20 –20 –0 Less than 4.7μF : –10~+75
• Voltage rating
2nd word A B C D E F G H J K V
1st word
0 1.0 1.25 1.6 2.0 2.5 3.15 4.0 5.0 6.3 8.0 –
1 10 12.5 16 20 25 31.5 40 50 63 80 35
2 100 125 160 200 250 315 400 500 630 800 –
3 1000 1250 1600 2000 2500 2150 4000 5000 6300 8000 –
• Chip capacitors
(EX) C C 7 3 F SL 1H 000 J Refer to the table above. • Dimension
L
1 2 3 4 5 6 7 1 = Type
T
(Chip) (CH, RH, UJ, SL) 2 = Shape
3 = Dimension
(EX) C K 7 3 F F 1H 000 Z 4 = Temp. coefficient W
1 2 3 4 5 6 7 5 = Voltage rating
(Chip) (B, F) 6 = Value Chip capacitor
7 = Tolerance Code L W T
Empty 5.6±0.5 5.0±0.5 Less than 2.0
A 4.5±0.5 3.2±0.4 Less than 2.0
RESISTORS B 4.5±0.5 2.0±0.3 Less than 2.0
• Chip resistor (Carbon) C 4.5±0.5 1.25±0.2 Less than 1.25
(EX) R D 7 3 E B 2B 000 J D 3.2±0.4 2.5±0.3 Less than 1.5
1 2 3 4 5 6 7 E 3.2±0.2 1.6±0.2 Less than 1.25
(Chip) (B, F) F 2.0±0.3 1.25±0.2 Less than 1.25
G 1.6±0.2 0.8±0.2 Less than 1.0
• Carbon resistor (Normal type) H 1.0±0.05 0.5±0.05 0.5±0.05
(EX) R D 1 4 B B 2C 000 J Chip resistor
1 2 3 4 5 6 7 Code L W T
E 3.2±0.2 1.6±0.2 1.0
1 = Type 5 = Rating wattage F 2.0±0.3 1.25±0.2 1.0
2 = Shape 6 = Value G 1.6±0.2 0.8±0.2 0.5±0.1
3 = Dimension 7 = Tolerance H 1.0±0.05 0.5±0.05 0.35±0.05
4 = Temp. coefficient
• Rating wattage
Code Wattage Code Wattage Code Wattage
1J 1/16W 2C 1/6W 3A 1W
2A 1/10W 2E 1/4W 3D 2W
2B 1/8W 2H 1/2W
17

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
✽ New Parts. indicates safety critical components. L : Scandinavia K : USA P : Canada
Parts without Parts No. are not supplied. Y : PX (Far East, Hawaii) T : England E : Europe
Les articles non mentionnes dans le Parts No. ne sont pas fournis. C : China X : Australia M : Other Areas
Teile ohne Parts No. werden nicht geliefert.
TK-7302/7302(V)/7302H/7302H(V)
DISPLAY UNIT (X54-3670-20), TX-RX UNIT (X57-7680-XX)
Ref. No. New
Address parts Parts No. Description Desti- Ref. No. New
Address parts Parts No. Description Desti-
nation nation
CN1 ✽ E40-6851-05 FLAT CABLE CONNECTOR
TK-7302/7302(V)/7302H/7302H(V)
CN2 E23-1262-05 TERMINAL
1 1B ✽ A02-4073-01 PLASTIC CABINET J1 3A ✽ E58-0535-05 MODULAR JACK
2 3A ✽ A62-1171-03 PANEL ASSY
101 3A ✽ J31-0565-15 COLLAR
4 2B ✽ B09-0732-03 CAP (D-SUB)
5 3A ✽ B10-2794-03 FRONT GLASS L1 L92-0138-05 CHIP FERRITE
6 3A ✽ B43-1629-04 BADGE
7 2D ✽ B62-2150-10 INSTRUCTION MANUAL M,HM CP1 RK74HB1J102J CHIP-COM 1.0K J 1/16W
7 2D ✽ B62-2167-10 INSTRUCTION MANUAL K,HK,HVK R1 RK73HB1J101J CHIP R 100 J 1/16W
R2 RK73FB2B100J CHIP R 10 J 1/8W
9 2B E04-0167-15 RF COAXIAL RECEPTACLE (M) R3-8 RK73HB1J102J CHIP R 1.0K J 1/16W
10 1C E30-7523-55 DC CORD ASSY ACCESSORY R10,11 RK73HB1J102J CHIP R 1.0K J 1/16W
11 2B ✽ E30-7684-05 DC CORD
12 2A ✽ E37-1461-05 FLAT CABLE (30P PANEL) R12 RK73HB1J122J CHIP R 1.2K J 1/16W
R21 RK73HB1J222J CHIP R 2.2K J 1/16W
14 1C F52-0023-05 FUSE (BLADE TYPE) 10A ACCESSORY M,K R22 RK73HB1J820J CHIP R 82 J 1/16W
14 1C F52-0024-05 FUSE (BLADE TYPE) 15A ACCESSORY HM,HK,HVK R23 RK73HB1J121J CHIP R 120 J 1/16W
R26,27 RK73HB1J000J CHIP R 0.0 J 1/16W
16 2B G53-1643-04 PACKING (DC CORD)
17 2B G53-1662-04 PACKING (RECEPTACLE) R28,29 RK73HB1J103J CHIP R 10K J 1/16W
18 1B ✽ G53-1819-01 PACKING (CHASSIS) R34 RK73HB1J102J CHIP R 1.0K J 1/16W
19 3A ✽ G53-1820-03 PACKING (PANEL) R35 RK73HB1J223J CHIP R 22K J 1/16W
21 1C,1D H12-3178-05 PACKING FIXTURE R37,38 RK73HB1J100J CHIP R 10 J 1/16W
22 2D ✽ H52-2310-12 ITEM CARTON CASE
R39 RK73HB1J150J CHIP R 15 J 1/16W
24 3D J19-1584-15 HOLDER (MIC HANGER) K,HK,HVK R40 RK73HB1J100J CHIP R 10 J 1/16W
25 3B ✽ J19-5528-03 HOLDER (SPEAKER) R41 RK73HB1J222J CHIP R 2.2K J 1/16W
26 1C J29-0726-03 BRACKET ACCESSORY R42 RK73HB1J102J CHIP R 1.0K J 1/16W
28 3A ✽ K29-9448-01 KEY TOP D20 DA221 DIODE

D33 02DZ6.2F-Y ZENER DIODE
A 1A,1B N35-2604-43 BINDING HEAD MACHINE SCREW D37 3A ✽ HDSP-521A LED
B 1A,2A,2B N67-3008-48 PAN HEAD SEMS SCREW IC1 ✽ TCA62746AFNAG MOS-IC
C 3A,3B N80-2008-48 PAN HEAD TAPTITE SCREW Q1,2 RT1N441U TRANSISTOR
D 2A,2B N87-2608-48 BRAZIER HEAD TAPTITE SCREW
30 3D N99-2039-05 SCREW SET ACCESSORY Q3 KRA225S DIGITAL TRANSISTOR
Q4 KRC102S-P DIGITAL TRANSISTOR
32 3A ✽ T07-0785-05 SPEAKER Q5,6 2SC3928A TRANSISTOR
33 2C ✽ T91-0624-65 MICROPHONE (KMC-30) ACCESSORY HK Q7,8 RT1P141U TRANSISTOR
34 2C ✽ T91-0639-55 MICROPHONE (KMC-35) ACCESSORY K,HVK Q9 2SC3928A TRANSISTOR
DISPLAY UNIT (X54-3670-20) TX-RX UNIT (X57-7680-XX) -11: K -12: HK -16: HVK -20: M -21: HM
D1-5 B30-2282-05 LED (Y) C2 CC73HCH1H101J CHIP C 100PF J
D22 3A ✽ B30-2321-05 LED (BLUE LED) C4 CC73HCH1H101J CHIP C 100PF J
D23 3A B30-2151-05 LED (RED/GREEN) C5 CK73HB1H471K CHIP C 470PF K
C7 CC73HCH1H101J CHIP C 100PF J
C1 CK73HB1E103K CHIP C 0.010UF K C8 CC73GCH1H101J CHIP C 100PF J
C9 CK73HB1H102K CHIP C 1000PF K C10 CK73HB1A104K CHIP C 0.10UF K
C10 CK73HB1E103K CHIP C 0.010UF K C11 CC73HCH1H101J CHIP C 100PF J
C15 CC73HCH1H080B CHIP C 8.0PF B
C27 CC73HCH1H101J CHIP C 100PF J C16 CK73HB0J105K CHIP C 1.0UF K
C29-36 CK73HB1H102K CHIP C 1000PF K
C38,39 CC73HCH1H101J CHIP C 100PF J C17,18 CK73HB1A104K CHIP C 0.10UF K
C40 CK73HB1H102K CHIP C 1000PF K C19,20 CK73HB1E103K CHIP C 0.010UF K
C41,42 CC73HCH1H101J CHIP C 100PF J C22 CK73FB0J106K CHIP C 10UF K
C23 CK73HB1A104K CHIP C 0.10UF K
C43-46 CK73HB1H471K CHIP C 470PF K C24 CK73FB0J106K CHIP C 10UF K
C47 CK73HB1H102K CHIP C 1000PF K
K : TK-7302(V)K HK : TK-7302HK HVK : TK-7302H(V)K

18 M : TK-7302M HM : TK-7302HM

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
TX-RX UNIT (X57-7680-XX)
Ref. No. New
nation nation
C26 CK73HB1C103K CHIP C 0.010UF K C314 CC73HCH1H080B CHIP C 8.0PF B
C27 CK73HB1A104K CHIP C 0.10UF K C315 CK73HB1C223K CHIP C 0.022UF K
C32 CK73HB1H471K CHIP C 470PF K C316 CC73HCH1H060B CHIP C 6.0PF B
C34 CK73HB1H471K CHIP C 470PF K C317 CS77AA1A4R7M CHIP TNTL 4.7UF 10WV
C35 CC73HCH1H060B CHIP C 6.0PF B C320 CK73GB1H102K CHIP C 1000PF K
C36 CC73GCH1H080B CHIP C 8.0PF B C322 CK73GB1H271K CHIP C 270PF K

C37 CK73HB1H471K CHIP C 470PF K C333 CK73HB1H471K CHIP C 470PF K
C40 CC73HCH1H390J CHIP C 39PF J C336 CK73GB1H221K CHIP C 220PF K
C41 CC73HCH1H330J CHIP C 33PF J C338 CC73GCH1H220J CHIP C 22PF J
C43 CS77CA1V0R1M CHIP TNTL 0.1UF 35WV C339 CK73GB1H102K CHIP C 1000PF K
C45 CS77BA1E010M CHIP TNTL 1.0UF 25WV C340,341 CC73GCH1H101J CHIP C 100PF J
C48 C93-0787-05 CERAMIC 0.1UF 50WV C344 CK73GB1H102K CHIP C 1000PF K
C49 C92-0863-05 CHIP TNTL 0.047UF 35WV C348 CC73GCH1H470J CHIP C 47PF J
C56 CC73HCH1H101J CHIP C 100PF J C351 C93-0559-05 CHIP C 9.0PF D

C57,58 CK73HB1H102K CHIP C 1000PF K C354 CK73HB1A104K CHIP C 0.10UF K
C59 CK73FB0J106K CHIP C 10UF K C355 CK73GB1H102K CHIP C 1000PF K
C62 CC73HCH1H330J CHIP C 33PF J C361,362 CK73GB1H103K CHIP C 0.010UF K
C63 CC73HCH1H101J CHIP C 100PF J C363 CC73GCH1H050B CHIP C 5.0PF B

C64 CC73HCH1HR75B CHIP C 0.75PF B C364 C93-0561-05 CHIP C 12PF J
C65,66 CK73HB1H102K CHIP C 1000PF K C365,366 C93-0603-05 CHIP C 1000PF K
C67,68 CK73GB1H102K CHIP C 1000PF K C367 CC73GCH1H020B CHIP C 2.0PF B
C69 CC73HCH1H040B CHIP C 4.0PF B C368 CC73GCH1H430J CHIP C 43PF J
C70 CC73HCH1H050B CHIP C 5.0PF B C372 C93-0562-05 CHIP C 15PF J

C71,72 CK73GB1H102K CHIP C 1000PF K C373 C93-0552-05 CHIP C 2.0PF C
C73 CC73HCH1H060B CHIP C 6.0PF B C374 CM73F2H200J CHIP C 20PF J
C75 CC73HCH1H030B CHIP C 3.0PF B C381 C93-0554-05 CHIP C 4.0PF C
C76 CC73HCH1H060B CHIP C 6.0PF B C383 C93-0562-05 CHIP C 15PF J

C77 CK73HB1H471K CHIP C 470PF K C384 CK73GB1H102K CHIP C 1000PF K
C78,79 CC73HCH1H010B CHIP C 1.0PF B C391,392 CK73HB1H102K CHIP C 1000PF K
C80 ✽ CS77BB21C100M CHIP TNTL 10U 16WV C500 CC73HCH1H470J CHIP C 47PF J
C81 CK73HB1H102K CHIP C 1000PF K C501 CC73HCH1H180J CHIP C 18PF J
C82 CK73HB1H471K CHIP C 470PF K C504 CK73HB1C103K CHIP C 0.010UF K

C84 CC73HCH1H180J CHIP C 18PF J C506 CC73HCH1H100B CHIP C 10PF B
C85 CC73HCH1H050B CHIP C 5.0PF B C508 CC73HCH1H270J CHIP C 27PF J
C86 CC73GCH1H050B CHIP C 5.0PF B C509 CK73HB1C103K CHIP C 0.010UF K
C87-89 CK73HB1H102K CHIP C 1000PF K C510-515 CK73HB1A104K CHIP C 0.10UF K

C90 CC73GCH1H150J CHIP C 15PF J C516 CK73HB1H102K CHIP C 1000PF K
C91 CK73HB1H102K CHIP C 1000PF K C517 CK73HB1E103K CHIP C 0.010UF K
C92 CK73HB1C103K CHIP C 0.010UF K C518 CK73HB1H331K CHIP C 330PF K
C94 CK73HB1H102K CHIP C 1000PF K C519 CK73FB0J106K CHIP C 10UF K
C95 CK73HB1A104K CHIP C 0.10UF K C520 CK73HB1H331K CHIP C 330PF K

C98 CK73GB1H102K CHIP C 1000PF K C521,522 CK73HB1A104K CHIP C 0.10UF K
C99 CK73HB1H471K CHIP C 470PF K C523 CK73GB1C104K CHIP C 0.10UF K
C102 CC73HCH1H270J CHIP C 27PF J C524 CK73HB1H102K CHIP C 1000PF K
C103 CC73HCH1H390J CHIP C 39PF J C525 CK73GB0J475K CHIP C 4.7UF K
C104 CC73HCH1H060B CHIP C 6.0PF B C526 CK73HB1H102K CHIP C 1000PF K

C105 CC73HCH1H040B CHIP C 4.0PF B C527 CC73HCH1H680J CHIP C 68PF J
C300 CC73GCH1H101J CHIP C 100PF J C529 CK73HB1E103K CHIP C 0.010UF K
C301 CC73HCH1H080B CHIP C 8.0PF B C530 CK73HB1A104K CHIP C 0.10UF K

C313 CK73HB1H102K CHIP C 1000PF K C543 CC73HCH1H010B CHIP C 1.0PF B

M : TK-7302M HM : TK-7302HM 19

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
C545 CC73HCH1H180J CHIP C 18PF J C736 CK73GB0J475K CHIP C 4.7UF K
C546 CC73HCH1H070B CHIP C 7.0PF B C739 CK73GB1C104K CHIP C 0.10UF K
C550 CK73HB1E103K CHIP C 0.010UF K C740 CK73HB1A104K CHIP C 0.10UF K
C551 CK73GB1A334K CHIP C 0.33UF K C743 CK73HB1C333K CHIP C 0.033UF K
C554 CC73HCH1H080B CHIP C 8.0PF B C745 CK73HB1A473J CHIP C 0.047UF J

C555 CK73HB1H102K CHIP C 1000PF K C746 CK73FB0J106K CHIP C 10UF K
C556 CC73HCH1H150G CHIP C 15PF G C747 CK73HB1A104K CHIP C 0.10UF K
C558 CK73HB1H102K CHIP C 1000PF K C749,750 CK73HB1A104K CHIP C 0.10UF K
C559 CK73GB1H471K CHIP C 470PF K C753 CK73GB0J106K CHIP C 10UF K

C562 CK73HB1E103K CHIP C 0.010UF K C758 CK73HB1H471K CHIP C 470PF K
C563,564 CK73HB1H102K CHIP C 1000PF K C760 CK73HB0J105K CHIP C 1.0UF K

C573 CC73HCH1H010B CHIP C 1.0PF B C764 CK73HB1E103K CHIP C 0.010UF K
C574 CC73HCH1H560J CHIP C 56PF J C765 CK73GB0J106K CHIP C 10UF K
C575 CC73HCH1H040B CHIP C 4.0PF B C767 CK73GB1C104K CHIP C 0.10UF K
C576 CK73HB1H102K CHIP C 1000PF K C768 CK73GB1H471K CHIP C 470PF K
C577 CC73HCH1H010B CHIP C 1.0PF B C769 CK73HB0J105K CHIP C 1.0UF K

C578 CC73HCH1H560J CHIP C 56PF J C770 CK73FB0J106K CHIP C 10UF K
C581 CC73HCH1H1R5B CHIP C 1.5PF B C771 CC73HCH1H101J CHIP C 100PF J
C582 CK73HB1H102K CHIP C 1000PF K C772 CK73HB0J105K CHIP C 1.0UF K
C585 CK73HB1A104K CHIP C 0.10UF K C774 CK73HB0J105K CHIP C 1.0UF K

C587 CK73GB1A105K CHIP C 1.0UF K C777 CK73HB0J105K CHIP C 1.0UF K
C588 CK73HB1H102K CHIP C 1000PF K C778 CK73HB1E562K CHIP C 5600PF K

C591 CK73HB1H471K CHIP C 470PF K C784 CK73GB0J106K CHIP C 10UF K
C592 CK73GB1A105K CHIP C 1.0UF K C785 CK73HB1H332K CHIP C 3300PF K
C594 CC73HCH1H560J CHIP C 56PF J C788 CK73HB1A683K CHIP C 0.068UF K

C596 CK73HB1H102K CHIP C 1000PF K C792-794 CK73HB1H471K CHIP C 470PF K
C597 CC73HCH1H030B CHIP C 3.0PF B C792,793 CK73HB1H102K CHIP C 1000PF K
C599 CC73HCH1H020B CHIP C 2.0PF B C796 CK73HB0J105K CHIP C 1.0UF K

C603 CC73HCH1H180J CHIP C 18PF J C808 CK73HB1A104K CHIP C 0.10UF K
C606 CK73HB1H471K CHIP C 470PF K C809 CK73GB1C104K CHIP C 0.10UF K
C700-709 CK73HB1H471K CHIP C 470PF K C810 CK73GB1H102K CHIP C 1000PF K
C704 CK73HB1H102K CHIP C 1000PF K C813,814 CK73HB1H102K CHIP C 1000PF K

C711 CK73HB1H471K CHIP C 470PF K C819 CS77AB21C220M CHIP TNTL 22UF 16WV
C715 CK73HB1H471K CHIP C 470PF K C821 CK73GB1A105K CHIP C 1.0UF K

C717 CK73HB1H471K CHIP C 470PF K C822 CK73HB0J105K CHIP C 1.0UF K
C719 CK73HB1H471K CHIP C 470PF K C824 CS77AB21C220M CHIP TNTL 22UF 16WV

C727 CK73HB1H471K CHIP C 470PF K C832 CK73GB1A224K CHIP C 0.22UF K
C731,732 CK73HB1H471K CHIP C 470PF K C835 CK73GB1H102K CHIP C 1000PF K
C735 CK73HB1A104K CHIP C 0.10UF K C837,838 CK73HB1H102K CHIP C 1000PF K

20 M : TK-7302M HM : TK-7302HM

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
C839 CS77AB21C4R7M CHIP TNTL 4.7UF 16WV C930 CK73HB1A104K CHIP C 0.10UF K
C840 CK73GB1H102K CHIP C 1000PF K C931 CK73HB1H102K CHIP C 1000PF K
C841 CK73GB1A105K CHIP C 1.0UF K C932 CK73HB1A104K CHIP C 0.10UF K
C842 CS77AA1A100M CHIP TNTL 10UF 10WV C933 CK73HB1H102K CHIP C 1000PF K
C843 C92-0873-05 ELECTRO 47UF 16WV C933 CK73HB1H471K CHIP C 470PF K
C844 CK73HB1H102K CHIP C 1000PF K C934 CC73HCH1H3R5B CHIP C 3.5PF B

C845 CK73HB1E103K CHIP C 0.010UF K C935 CK73HB1H102K CHIP C 1000PF K
C846 CK73GB1H102K CHIP C 1000PF K C937 CK73HB1E103K CHIP C 0.010UF K
C849 ✽ CE32BD1C471M CHIP EL 470UF 16WV C939 CK73HB1A104K CHIP C 0.10UF K
C850 CK73GB1H102K CHIP C 1000PF K C940 CK73FB0J106K CHIP C 10UF K

C851 CK73GB1A105K CHIP C 1.0UF K C941 CK73HB1H471K CHIP C 470PF K
C853,854 CK73HB1H102K CHIP C 1000PF K C945 CK73GB1H471K CHIP C 470PF K
C855 CK73GB1H102K CHIP C 1000PF K C946 CC73GCH1H240J CHIP C 24PF J

C857 CC73HCH1H220J CHIP C 22PF J C947 CK73HB1H471K CHIP C 470PF K
C858 CK73GB1H221K CHIP C 220PF K C948 CK73GB0J106K CHIP C 10UF K
C859 CC73HCH1H470J CHIP C 47PF J C949 CC73HCH1H120J CHIP C 12PF J
C860 CC73HCH1H101J CHIP C 100PF J C950 CC73HCH1H101J CHIP C 100PF J
C861 CK73GB1H471K CHIP C 470PF K C952 CC73GCH1H220J CHIP C 22PF J

C862 CK73HB1H102K CHIP C 1000PF K C953 CK73FB1E225K CHIP C 2.2UF K
C863 CC73HCH1H220J CHIP C 22PF J C954-956 CK73HB1H102K CHIP C 1000PF K
C864 CC73GCH1H470J CHIP C 47PF J C956 CK73HB1H471K CHIP C 470PF K
C865 CC73HCH1H220J CHIP C 22PF J C957 CK73EB1E106K CHIP C 10UF K
C866 CK73GB1H102K CHIP C 1000PF K C958 CK73HB0J105K CHIP C 1.0UF K

C867 CK73GB1H471K CHIP C 470PF K
C868 CK73HB1A334K CHIP C 0.33UF K CN702 E40-5932-05 SOCKET FOR PIN ASSY
C869 CK73GB1H221K CHIP C 220PF K CN724 ✽ E40-6847-05 FLAT CABLE CONNECTOR
C870 CK73HB1H102K CHIP C 1000PF K CN751 E23-1262-05 TERMINAL
J700 1B ✽ E58-0536-05 SUB SOCKET (D)
C874 CK73GB0J105K CHIP C 1.0UF K J701 2A E11-0425-05 3.5D PHONE JACK (3P)
C875-877 CK73HB0J105K CHIP C 1.0UF K
C878 CC73HCH1H150J CHIP C 15PF J F700 F53-0327-05 FUSE (4A)
C880 CK73HB1H102K CHIP C 1000PF K CD500 L79-1866-05 TUNING COIL
CF500 L72-0993-05 CERAMIC FILTER
C881 CK73HB0J105K CHIP C 1.0UF K CF501 L72-0959-05 CERAMIC FILTER
C882 CK73GB1A105K CHIP C 1.0UF K L2 L41-4791-08 SMALL FIXED INDUCTOR (4.7NH)
C883 CK73HB1A224K CHIP C 0.22UF K L3 L92-0442-05 CHIP FERRITE
C884 ✽ CE32BD1C471M CHIP EL 470UF 16WV
C885,886 CK73GB1H102K CHIP C 1000PF K L4 L92-0443-05 CHIP FERRITE
L7 L92-0163-05 BEADS CORE
C887 CK73HB1H102K CHIP C 1000PF K L9 L92-0163-05 BEADS CORE
C887 CK73HB1H471K CHIP C 470PF K L17 L92-0443-05 CHIP FERRITE
C889 CK73HB1H102K CHIP C 1000PF K L18 L41-1585-14 SMALL FIXED INDUCTOR (150NH)
C889-891 CK73HB1H471K CHIP C 470PF K
C894 C93-0552-05 CHIP C 2.0PF C L19 ✽ L41-1285-14 SMALL FIXED INDUCTOR (120NH)
L20,21 L40-2702-86 SMALL FIXED INDUCTOR (27UH)
C898 CK73HB1H102K CHIP C 1000PF K L24 L92-0443-05 CHIP FERRITE
C898 CK73HB1H471K CHIP C 470PF K L25,26 L40-1085-71 SMALL FIXED INDUCTOR (100NH)
C915 CK73HB1H471K CHIP C 470PF K
C917 CC73HCH1H200J CHIP C 20PF J L28 L40-2275-71 SMALL FIXED INDUCTOR (22NH)
L29 L40-1001-86 SMALL FIXED INDUCTOR (10UH)
C918 CC73HCH1H121J CHIP C 120PF J L30 L40-4791-86 SMALL FIXED INDUCTOR (4.7UH)
C919 CC73HCH1H150J CHIP C 15PF J L31,32 L40-1891-86 SMALL FIXED INDUCTOR (1.8UH)
C920 CK73HB1E103K CHIP C 0.010UF K L33 L40-1001-86 SMALL FIXED INDUCTOR (10UH)
C921 CK73GB1A105K CHIP C 1.0UF K
C922 CK73HB1H102K CHIP C 1000PF K L34 L40-2702-86 SMALL FIXED INDUCTOR (27UH)
L35 L40-4791-86 SMALL FIXED INDUCTOR (4.7UH)
C923 CK73HB1A104K CHIP C 0.10UF K L36 L40-1891-86 SMALL FIXED INDUCTOR (1.8UH)
C924,925 CK73HB0J105K CHIP C 1.0UF K L37 L40-2702-86 SMALL FIXED INDUCTOR (27UH)
C926,927 CK73HB1H102K CHIP C 1000PF K L38 L40-1891-86 SMALL FIXED INDUCTOR (1.8UH)
C928 CK73HB1A104K CHIP C 0.10UF K

M : TK-7302M HM : TK-7302HM 21

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
L300 L40-1875-71 SMALL FIXED INDUCTOR (18NH) R49 RK73HB1J472J CHIP R 4.7K J 1/16W
L301 L40-1075-71 SMALL FIXED INDUCTOR (10NH) R50 RK73HB1J271J CHIP R 270 J 1/16W
L304 L40-1575-92 SMALL FIXED INDUCTOR (15NH) R53 RK73HB1J273J CHIP R 27K J 1/16W
L305 L40-1285-92 SMALL FIXED INDUCTOR (120NH) R54 RK73HB1J000J CHIP R 0.0 J 1/16W
L308-310 L92-0179-05 CHIP FERRITE R55 RK73HB1J101J CHIP R 100 J 1/16W
L311 L34-1039-05 AIR-CORE COIL R56 RK73HB1J103J CHIP R 10K J 1/16W
L312 ✽ L34-4902-05 AIR-CORE COIL R57 RK73HB1J822J CHIP R 8.2K J 1/16W
L313-315 ✽ L34-4903-05 AIR-CORE COIL R58-60 RK73HB1J101J CHIP R 100 J 1/16W
L316 ✽ L34-4902-05 AIR-CORE COIL R61 RK73HB1J000J CHIP R 0.0 J 1/16W

L501 L40-4781-86 SMALL FIXED INDUCTOR (0.47UH) R62 RK73HB1J222J CHIP R 2.2K J 1/16W
L503 L40-5681-86 SMALL FIXED INDUCTOR (0.56UH) R63 RK73HB1J472J CHIP R 4.7K J 1/16W
L504 L40-2775-71 SMALL FIXED INDUCTOR (27NH) R64 RK73GB2A472J CHIP R 4.7K J 1/10W
L505,506 L41-4785-39 SMALL FIXED INDUCTOR (0.47UH) R65 RK73HB1J103J CHIP R 10K J 1/16W
L512 L41-5678-14 SMALL FIXED INDUCTOR (56NH) R68,69 RK73HB1J000J CHIP R 0.0 J 1/16W
L514 ✽ L41-6878-45 SMALL FIXED INDUCTOR (68NH) R73 RK73HB1J000J CHIP R 0.0 J 1/16W
L517,518 L41-5678-14 SMALL FIXED INDUCTOR (56NH) R75-78 RK73HB1J000J CHIP R 0.0 J 1/16W
L700 L92-0443-05 CHIP FERRITE R79,80 RK73HB1J153J CHIP R 15K J 1/16W
L702 L92-0443-05 CHIP FERRITE R82 RK73HB1J153J CHIP R 15K J 1/16W

L704 L40-2775-71 SMALL FIXED INDUCTOR (27NH) R83 RK73FB2B102J CHIP R 1.0K J 1/8W
L707 L40-6875-57 SMALL FIXED INDUCTOR (68.0NH) R306 RK73HB1J223J CHIP R 22K J 1/16W
L708 L40-6875-92 SMALL FIXED INDUCTOR (68NH) R321 RK73GB2A151J CHIP R 150 J 1/10W
X1 ✽ L77-3055-05 TCXO (19.2MHZ) R323 RK73GB2A390J CHIP R 39 J 1/10W

XF500 ✽ L71-0659-05 MCF (38.85MHZ) R324 RK73GB2A000J CHIP R 0.0 J 1/10W
R325 RK73GB2A151J CHIP R 150 J 1/10W
CP700-702 RK75HA1J102J CHIP-COM 1.0K J 1/16W R327 RK73HB1J101J CHIP R 100 J 1/16W
CP704-706 RK75HA1J102J CHIP-COM 1.0K J 1/16W R329 RK73GB2A470J CHIP R 47 J 1/10W
R3 RK73HB1J334J CHIP R 330K J 1/16W
R5-7 RK73HB1J102J CHIP R 1.0K J 1/16W R330 RK73HB1J000J CHIP R 0.0 J 1/16W
R8 RK73HB1J152J CHIP R 1.5K J 1/16W R331 RK73HB1J154J CHIP R 150K J 1/16W
R333,334 RK73HB1J103J CHIP R 10K J 1/16W
R10 RK73HB1J100J CHIP R 10 J 1/16W R336 RK73HB1J000J CHIP R 0.0 J 1/16W
R12 RK73HB1J100J CHIP R 10 J 1/16W R338 RK73HB1J153J CHIP R 15K J 1/16W MK
R16 RK73HB1J000J CHIP R 0.0 J 1/16W R338 RK73HB1J223J CHIP R 22K J 1/16W HM,HK,HVK
R20 RK73HB1J102J CHIP R 1.0K J 1/16W R341 RK73HB1J000J CHIP R 0.0 J 1/16W
R21 RK73HB1J000J CHIP R 0.0 J 1/16W R343 RK73HB1J000J CHIP R 0.0 J 1/16W
R23 RK73HB1J223J CHIP R 22K J 1/16W R345 RK73HB1J104J CHIP R 100K J 1/16W
R25 RK73HB1J000J CHIP R 0.0 J 1/16W
R28 RK73HB1J000J CHIP R 0.0 J 1/16W R347 RK73GH2A101D CHIP R 100 D 1/10W
R30 RK73HB1J102J CHIP R 1.0K J 1/16W R352 RK73GH2A680D CHIP R 68 D 1/10W
R31 RK73HB1J105J CHIP R 1.0M J 1/16W
R32,33 RK73HB1J000J CHIP R 0.0 J 1/16W R353 RK73RB2H101J CHIP R 100 J 1/2W
R34 RK73HB1J222J CHIP R 2.2K J 1/16W R354,355 RK73GB2A000J CHIP R 0.0 J 1/10W
R357,358 RK73GB2A000J CHIP R 0.0 J 1/10W
R36 RK73HB1J273J CHIP R 27K J 1/16W R367 RK73GH2A181D CHIP R 180 D 1/10W
R38 RK73HB1J000J CHIP R 0.0 J 1/16W R369,370 RK73HB1J104J CHIP R 100K J 1/16W
R39 RK73HB1J104J CHIP R 100K J 1/16W R374 2B R92-1061-05 JUMPER REST 0 OHM
R40 RK73HB1J000J CHIP R 0.0 J 1/16W R376 RK73HB1J103J CHIP R 10K J 1/16W
R41 RK73HB1J393J CHIP R 39K J 1/16W R381 RK73GB2A102J CHIP R 1.0K J 1/10W
R45 RK73HB1J473J CHIP R 47K J 1/16W R382-384 RK73HB1J000J CHIP R 0.0 J 1/16W
R46 RK73HB1J101J CHIP R 100 J 1/16W R387,388 RK73HB1J104J CHIP R 100K J 1/16W
R47 RK73HB1J471J CHIP R 470 J 1/16W R501 RK73HB1J334J CHIP R 330K J 1/16W
R48 RK73GB2A104J CHIP R 100K J 1/10W R502 RK73HB1J101J CHIP R 100 J 1/16W

22 M : TK-7302M HM : TK-7302HM

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
R503-508 RK73HB1J103J CHIP R 10K J 1/16W R716 RK73HB1J000J CHIP R 0.0 J 1/16W
R509 RK73GB2A100J CHIP R 10 J 1/10W R718 RK73HB1J682J CHIP R 6.8K J 1/16W
R511 RK73HB1J823J CHIP R 82K J 1/16W R720 RK73HB1J101J CHIP R 100 J 1/16W
R512 RK73HB1J272J CHIP R 2.7K J 1/16W R722 RK73HB1J222J CHIP R 2.2K J 1/16W
R515 RK73GB2A472J CHIP R 4.7K J 1/10W R724 RK73HB1J000J CHIP R 0.0 J 1/16W
R517 RK73HB1J000J CHIP R 0.0 J 1/16W R725,726 RK73HH1J473D CHIP R 47K D 1/16W
R519 RK73HB1J332J CHIP R 3.3K J 1/16W R728-730 RK73HB1J000J CHIP R 0.0 J 1/16W
R522 RK73HB1J000J CHIP R 0.0 J 1/16W R732 RK73HB1J102J CHIP R 1.0K J 1/16W
R525 RK73HB1J000J CHIP R 0.0 J 1/16W R734,735 RK73HB1J102J CHIP R 1.0K J 1/16W
R527 RK73HB1J224J CHIP R 220K J 1/16W R736 RK73GB2A000J CHIP R 0.0 J 1/10W
R530 RK73HB1J391J CHIP R 390 J 1/16W R738 RK73HB1J562J CHIP R 5.6K J 1/16W
R543,544 RK73HB1J823J CHIP R 82K J 1/16W R749 RK73GB2A000J CHIP R 0.0 J 1/10W
R547 RK73HB1J151J CHIP R 150 J 1/16W R753 RK73GB2A104J CHIP R 100K J 1/10W
R562 RK73HB1J820J CHIP R 82 J 1/16W R761 RK73HB1J101J CHIP R 100 J 1/16W
R566 RK73HB1J104J CHIP R 100K J 1/16W R765 RK73HB1J000J CHIP R 0.0 J 1/16W
R567 RK73HB1J564J CHIP R 560K J 1/16W R766 RK73HB1J682J CHIP R 6.8K J 1/16W
R569 RK73HB1J104J CHIP R 100K J 1/16W R770 RK73GB2A000J CHIP R 0.0 J 1/10W
R573,574 RK73HB1J223J CHIP R 22K J 1/16W R774 RK73HB1J222J CHIP R 2.2K J 1/16W
R577 RK73FB2B000J CHIP R 0.0 J 1/8W R776 RK73HB1J103J CHIP R 10K J 1/16W
R589 RK73HB1J000J CHIP R 0.0 J 1/16W R778,779 RK73HB1J473J CHIP R 47K J 1/16W
R590 RK73HB1J823J CHIP R 82K J 1/16W R780 RK73HB1J222J CHIP R 2.2K J 1/16W
R705 RK73HB1J681J CHIP R 680 J 1/16W R785 RK73HB1J105J CHIP R 1.0M J 1/16W
R708 RK73HB1J472J CHIP R 4.7K J 1/16W R786 RK73GB2A102J CHIP R 1.0K J 1/10W
R710 RK73GB2A124J CHIP R 120K J 1/10W R789 RK73GB2A472J CHIP R 4.7K J 1/10W
R713 RK73HB1J104J CHIP R 100K J 1/16W R792 RK73GH2A134D CHIP R 130K D 1/10W
R714,715 RK73HB1J223J CHIP R 22K J 1/16W R793 RK73GH2A183D CHIP R 18K D 1/10W

M : TK-7302M HM : TK-7302HM 23

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
R794-797 RK73HB1J102J CHIP R 1.0K J 1/16W R896 RK73GB2A000J CHIP R 0.0 J 1/10W
R798 RK73GB2A000J CHIP R 0.0 J 1/10W R899 RK73HB1J000J CHIP R 0.0 J 1/16W
R799-801 RK73HB1J102J CHIP R 1.0K J 1/16W R928,929 RK73HB1J472J CHIP R 4.7K J 1/16W
R806-808 RK73HB1J000J CHIP R 0.0 J 1/16W R932 RK73HB1J000J CHIP R 0.0 J 1/16W
R811 RK73HB1J102J CHIP R 1.0K J 1/16W R933 RK73GB2A000J CHIP R 0.0 J 1/10W M,HM,HVK
R812 RK73HB1J473J CHIP R 47K J 1/16W R934 RK73GB2A000J CHIP R 0.0 J 1/10W K,HK
R817-819 RK73HB1J000J CHIP R 0.0 J 1/16W R938 RK73HB1J000J CHIP R 0.0 J 1/16W
R820 RK73HB1J473J CHIP R 47K J 1/16W R939,940 RK73GB2A000J CHIP R 0.0 J 1/10W
R823 RK73GB2A102J CHIP R 1.0K J 1/10W R951,952 RK73GB2A000J CHIP R 0.0 J 1/10W
R824 RK73HB1J152J CHIP R 1.5K J 1/16W R953,954 RK73HB1J000J CHIP R 0.0 J 1/16W
R829 RK73HB1J000J CHIP R 0.0 J 1/16W R958 RK73HB1J561J CHIP R 560 J 1/16W
R831,832 RK73HB1J000J CHIP R 0.0 J 1/16W R959 RK73HB1J184J CHIP R 180K J 1/16W
R833-835 RK73HB1J103J CHIP R 10K J 1/16W R960 RK73HB1J222J CHIP R 2.2K J 1/16W
R846 RK73GB2A221J CHIP R 220 J 1/10W R973 RK73HB1J100J CHIP R 10 J 1/16W
R847 RK73HB1J391J CHIP R 390 J 1/16W R974 RK73HB1J390J CHIP R 39 J 1/16W

R848 RK73GB2A473J CHIP R 47K J 1/10W R975,976 RK73HB1J151J CHIP R 150 J 1/16W
R849 RK73FB2B000J CHIP R 0.0 J 1/8W R977,978 RK73HB1J473J CHIP R 47K J 1/16W
R850 RK73GB2A334J CHIP R 330K J 1/10W R979-998 RK73HB1J000J CHIP R 0.0 J 1/16W
R852 RK73HB1J564J CHIP R 560K J 1/16W D1 ✽ 1SS389-F DIODE

R853 RK73HB1J000J CHIP R 0.0 J 1/16W D4,5 HVC376B VARIABLE CAPACITANCE DIODE
R854 RK73GB2A104J CHIP R 100K J 1/10W D6-11 1SV325F VARIABLE CAPACITANCE DIODE
R855 RK73HB1J101J CHIP R 100 J 1/16W D12 1SV278F VARIABLE CAPACITANCE DIODE
R856 RK73HB1J000J CHIP R 0.0 J 1/16W D13,14 HVC376B VARIABLE CAPACITANCE DIODE
R857 RK73HB1J102J CHIP R 1.0K J 1/16W D15-17 HSC277 DIODE

R858 RK73HB1J332J CHIP R 3.3K J 1/16W D300 UDZW5.1(B) ZENER DIODE
R859-863 RK73HB1J000J CHIP R 0.0 J 1/16W D301 1SS355 DIODE
R867,868 RK73HB1J000J CHIP R 0.0 J 1/16W D302,303 L407CDB DIODE (50V/1W)
R869 RK73HB1J104J CHIP R 100K J 1/16W D304,305 L7091CER DIODE
R870,871 RK73HB1J000J CHIP R 0.0 J 1/16W D310,311 UDZW3.3(B) ZENER DIODE

R873-876 RK73HB1J000J CHIP R 0.0 J 1/16W D312 HSC277 DIODE
R877 RK73HB1J473J CHIP R 47K J 1/16W D313,314 MA3J742 DIODE
R878-881 RK73HB1J105J CHIP R 1.0M J 1/16W D500,501 MC2858 DIODE
R882 RK73HB1J823J CHIP R 82K J 1/16W D506 1SV305F VARIABLE CAPACITANCE DIODE
R883 RK73HB1J000J CHIP R 0.0 J 1/16W D508-510 1SV305F VARIABLE CAPACITANCE DIODE
R884 RK73HB1J472J CHIP R 4.7K J 1/16W D700-710 DA221 DIODE
R885 RK73HB1J683J CHIP R 68K J 1/16W D711 MC2858 DIODE
R886 RK73HB1J823J CHIP R 82K J 1/16W D712 1SS372F DIODE
R887 RK73FB2B000J CHIP R 0.0 J 1/8W D715 UDZW18(B) ZENER DIODE
R888 RK73GB2A473J CHIP R 47K J 1/10W D717 Z5W27V SURGE ABSORBER

R889 RK73GB2A221J CHIP R 220 J 1/10W D718 MA2S111-F DIODE
R890 RK73HB1J102J CHIP R 1.0K J 1/16W D719,720 HVC131 DIODE
R891-893 RK73HB1J000J CHIP R 0.0 J 1/16W IC1 MB15E03SL-E1 MOS-IC
R894,895 RK73HB1J102J CHIP R 1.0K J 1/16W IC2 ✽ BD7542FVM MOS-IC

24 M : TK-7302M HM : TK-7302HM

TK-7302/7302(V)/7302H/7302H(V)
PARTS LIST
Ref. No. New
nation nation
IC300 ✽ HA17358BFEL-E MOS-IC
IC301 2B ✽ RA60H1317M1A MOS-IC HM,HK,HVK
IC301 2B ✽ S-AV33A MOS-IC M,K
IC500 TA31136FNG MOS-IC
IC501 ✽ HA17358BFEL-E MOS-IC
IC700 NJM2100V-ZB MOS-IC

IC701 ✽ CD686Q3 MOS-IC
IC702 ✽ F364AEDFBKCUA MICROCONTROLLER IC
IC703 ✽ EX24064ASAS0A ROM IC
IC704 ✽ TA4809BF ANALOGUE IC
IC705 2A LA4600 BI-POLAR IC

IC706 ✽ XC6221B332NR MOS-IC
IC707 TA7805FQ MOS-IC
IC708 BD4740G MOS-IC
IC709 ✽ XC6120N402N1 MOS-IC
IC710 ✽ XC6221B332NR MOS-IC

Q3 2SC5108(Y)F TRANSISTOR
Q4 ✽ MCH3914(7)-H FET
Q5 2SJ347F FET
Q6 ✽ MCH3914(7)-H FET
Q7 KRX102U TRANSISTOR
Q8 KTC4075E(Y,GR) TRANSISTOR
Q9,10 2SC5108(Y)F TRANSISTOR
Q11 SSM3J05FU-F FET
Q12 2SK1830F FET
Q300 RD00HVS1-T113 FET

Q501 RT1P441U TRANSISTOR
Q504 3SK318 FET
Q506 3SK318 FET

Q507 RT1N441U TRANSISTOR
Q701 2SK1830F FET
Q702 2SC4919 TRANSISTOR

Q705 SSM3J05FU-F FET
Q707 KRC414RTK DIGITAL TRANSISTOR
Q710-712 RT1N441U TRANSISTOR
Q713,714 2SB1694 TRANSISTOR

Q715 SSM3K05FU FET
Q717,718 SSM3J05FU-F FET
Q720 2SJ645 FET

Q723 SSM3K05FU FET
Q724 2SJ645 FET

Q729,730 KTC4075E(Y,GR) TRANSISTOR
Q731,732 2SC5108(Y)F TRANSISTOR
TH300-302 B57331V2104J THERMISTOR
TH501 NCP18WM474J0S THERMISTOR
K : TK-7302(V)K HK : TK-7302HK HVK : TK-7302H(V)K If a part reference number is listed in a shaded

M : TK-7302M HM : TK-7302HM 25
box, that part does not come with the PCB.
TK-7302/7302(V)/7302H/7302H(V)
EXPLODED VIEW
A B
A
1
A M2.6 x 4 (Bi) : N35-2604-43

B M3 x 8 : N67-3008-48
C M2 x 8 : N80-2008-48
1 D M2.6 x 8 (Br-Tap) : N87-2608-48 A
18
X57 X57
B J701 J700
B
IC705 B
IC301
12
Dx12
X57
703 R374
TX-RX unit
2
B 11
4
16
700 D
Chassis
D
17 9
19
X54
X54
D23 101 701

X54
704 Caution label
C
D22 Display unit
X54
J1
C 702
3 Model name plate
2 X54
D37
25
28
5
6 32
Parts with the exploded numbers larger than 700 are not supplied.
26 If a part reference number is listed in a box on the exploded view of the PCB, that part does not come with the PCB.
These parts must be ordered separately.
TK-7302/7302(V)/7302H/7302H(V)
PACKING
C D
26 Bracket
(J29-0726-03)
14 Fuse (Blade type) x 2

(F52-0023-05): M,K
(F52-0024-05): HM,HK,HVK
21 Packing fixture
(H12-3178-05)
10 DC cord assy
(E30-7523-55)
1
705
21 Packing fixture Protection bag
(H12-3178-05)
22 Item carton case

(H52-2310-12)
33 Microphone (KMC-30)
(T91-0624-65): HK
7 Instruuction manual
(B62-2150-10): M,HM
(B62-2167-10): K,HK,HVK
34 Microphone (KMC-35)
(T91-0639-55): K,HVK 706
Pamphlet
30 Screw set
(N99-2039-05)
24 Holder (MIC hanger)

(J19-1584-15): K,HK,HVK
Parts with the exploded numbers larger than 700 are not supplied. 27

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
Test Equipment Required for Alignment
Test Equipment Major Specifications
Frequency Range 136 to 174MHz
1. Standard Signal Generator (SSG) Modulation Frequency modulation and external modulation
Output –127dBm/0.1µV to greater than –7dBm/100mV
Input Impedance 50Ω
2. Power Meter Operation Frequency 136 to 174MHz or more
Measurement Range Vicinity of 100W
3. Deviation Meter Frequency Range 136 to 174MHz
Measuring Range 1 to 20V DC
4. Digital Volt Meter (DVM)
Input Impedance High input impedance for minimum circuit loading
5. Oscilloscope DC through 30MHz
6. High Sensitivity Frequency Range 10Hz to 1000MHz
Frequency Counter Frequency Stability 0.2ppm or less
7. Ammeter 20A or more
Frequency Range 50Hz to 10kHz
8. AF Volt Meter (AF VTVM)
Voltage Range 1mV to 3V
Frequency Range 20Hz to 20kHz or more
9. Audio Generator (AG)
Output 0 to 1V
Capability 3% or less at 1kHz
10. Distortion Meter
Input Level 50mV to 10Vrms
11. 4Ω Dummy Load Approx. 4Ω, 10W or more
13.6V, approx. 20A (adjustable from 9 to 17V)
12. Regulated Power Supply
Useful if ammeter equipped
13. Spectrum Analyzer Center Frequency 50kHz to 600MHz
14. Tracking Generator Output Voltage 100mV or more
Test cable for microphone input (E30-3360-28) Tuning cable (E30-3383-05)

Adapter cable (E30-3383-05) is required for inject-
GREEN ing an audio if PC tuning is used.
1 1
RED
See “PC Mode” section for the connection.
2 2
BLACK E
3 3
BLUE PTT
4 4
SHIELD MIC-E
5 5
WHITE MIC
6 6
GRAY HK
7 7
YELLOW
8 8
Lead wire +
MIC connector (Front panel view)
Shield wire –
MIC
1 : MBL
2 : SB
8 3 : GND
4 : PTT
5 : ME
1 6 : MIC
7 : HOOK
8 : DM
28

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
Test Frequency 3 or 5 Reference Level Adjustment Frequency
Channel RX (MHz) TX (MHz) Tuning point RX (MHz) TX (MHz)
1 155.05 155.10 1 136.05 136.10
2 136.05 136.10 2 145.55 145.50
3 173.95 173.90 3 155.05 155.10
4 155.00 155.00 4 164.55 164.50
5 155.20 155.20 5 173.95 173.90
6 155.40 155.40
Adjustment Points
Test Signaling ■ Component side
RX TX
1 None None J700
D-SUB
2 None 20Hz Square wave
J701
3 QT: 67.0Hz QT: 67.0Hz EXT.SP
+
4 QT: 151.4Hz QT: 151.4Hz
5 QT: 210.7Hz QT: 210.7Hz LV
6 QT: 254.1Hz QT: 254.1Hz
7 DQT: 023N DQT: 023N
8 DQT: 754I DQT: 754I
LV
9 DTMF: 159D DTMF: 159D
10 None DTMF Code 3
11 None MSK (1010..)
12 FleetSync: 100-1000 Fleet Sync: 100-1000
■ Foil side
13 None Single Tone : 1000Hz
2-Tone 2-Tone
14 R374
A: 304.7Hz, B: 3106.0Hz A: 304.7Hz, B: 3106.0Hz (ANT)
15 Single Tone: 1477Hz Single Tone: 1477Hz

16 None Single Tone: 1200Hz
17 None MSK PN9
LV
29

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
Common Section
Measurement Adjustment
Item Condition Test- Specifications / Remarks
Unit Terminal Unit Parts Method
equipment
1. Setting 1) Power supply voltage
DC power supply terminal
: 13.6V
2. Rx Assist 1) CH: RX low FPU “Voltage Level” 2.5V±0.2V

(Auto) CH: RX low’ indicator on the PC
(Narrow) CH: RX center window shows VCO
CH: RX high’ lock voltage.
CH: RX high Change the adjust-
ment value to get
VCO lock voltage
within the limit of
the specified volt-
3. Tx Assist 1) CH: TX low age.
(Auto) CH: TX low’
(Narrow) CH: TX center Note:
CH: TX high’ Confirm the VCO
CH: TX high lock voltage approxi-
Transmit mately 3 seconds
after the adjustment
value is changed.
4. VCO lock 1) CH: RX low Power TX-RX CV Check 2.5V±0.2V

voltage CH: RX low’ meter
CH: RX center DVM
• RX CH: RX high’
CH: RX high
• TX 2) CH: TX low
CH: TX low’
CH: TX center
CH: TX high’
CH: TX high
Transmit
Transmitter Section
equipment
1. Frequency 1) TEST CH: TX center Frequency ANT FPU Adjust to center Within ±50Hz
(Narrow) Transmit counter frequency
2. High Power 1) CH: TX low Power 25W ±1.0W

(Auto) CH: TX low’ meter 8.0A or less
(Narrow) CH: TX center
CH: TX high’
• TK-7302/ CH: TX high
7302(V) Transmit
• TK-7302H/ 50W ±2.0W

7302H(V) 14.0A or less
30

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
equipment
3. Low Power 1) CH: TX low Power ANT FPU 5W ±0.5W
(Auto) CH: TX low’ meter 4.0A or less
(Narrow) CH: TX center
CH: TX high’
CH: TX high
Transmit
4. DQT 1) CH: TX low Deviation The Deviation of ±0.4dB

Balance CH: TX low’ meter 20Hz frequency is
(Wide) CH: TX center Oscillo- fixed.
CH: TX high’ scope Change the 1kHz
CH: TX high adjustment value to
Deviation meter filter become the same
LPF: 3kHz deviation of 20Hz
HPF: OFF within the specified
Transmit range.
5. Maximum 1) CH: TX low Deviation ANT 4.2kHz ±0.1kHz

Deviation CH: TX low’ meter MIC (According to the
(Wide) CH: TX center Oscillo- large +, –)
CH: TX high’ scope
CH: TX high AG
Deviation meter filter AFV
LPF: 15kHz
HPF: OFF
AG: 1kHz/50mV
Transmit
6. MIC 1) CH: TX center Check 2.2kHz~3.6kHz

sensitivity AG: 1kHz/5mV
Transmit
7. DQT 1) CH: TX center FPU 0.75kHz ±0.05kHz

Deviation Deviation meter filter
(Wide) LPF: 3kHz
HPF: OFF
Transmit
8. QT 1) CH: TX center 0.75kHz ±0.05kHz

(Wide) LPF: 3kHz
HPF: OFF
Transmit
9. DTMF 1) CH: TX center 3.0kHz ±0.1kHz

(Wide) LPF: 15kHz
HPF: OFF
Transmit
10. MSK 1) CH: TX center 3.0kHz ±0.1kHz

(Wide) LPF: 15kHz
HPF: OFF
Transmit
31

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
Receiver Section
equipment
1. RX 1) CH: RX low (Wide) SSG ANT FPU Write
Sensitivity CH: RX low’ (Wide) Oscillo- Ext.SP
CH: RX center (Wide) scope
CH: RX high’ (Wide) AF VTVM
CH: RX high (Wide) Distortion
2) SSG output: –90dBm (7.08µV) meter
Mod: 1kHz
Dev: ±3.0kHz
2. Squelch 1) CH: RX low

pre-set (5) CH: RX low’
(Wide) CH: RX center
CH: RX high’
CH: RX high
2) SSG output: –120dBm (0.22µV)
Mod: 1kHz
Dev: ±3.0kHz
(Narrow) 1) CH: RX low

CH: RX low’
CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±1.5kHz
3. Squelch 1) CH: RX low

tight (9) CH: RX low’
(Wide) CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±3.0kHz

CH: RX low’
CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±1.5kHz
4. LRSSI 1) CH: RX low

(Wide) CH: RX low’
CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±3.0kHz
32

TK-7302/7302(V)/7302H/7302H(V)
ADJUSTMENT
equipment
RSSI 1) CH: RX low SSG ANT FPU Write
(Narrow) CH: RX low’ Oscillo- Ext.SP
CH: RX center scope
CH: RX high’ AF VTVM
CH: RX high Distortion
2) SSG output: –120dBm (0.22µV) meter
Mod: 1kHz
Dev: ±1.5kHz
5. HRSSI 1) CH: RX low

(Wide) CH: RX low’
CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±3.0kHz

CH: RX low’
CH: RX center
CH: RX high’
CH: RX high
Mod: 1kHz
Dev: ±1.5kHz
33

TK-7302/7302(V)/7302H/7302H(V)
TERMINAL FUNCTION
Display unit (X54-3670-20) TX-RX unit (X57-7680-XX)
Pin No. Name I/O Function Pin No. Name I/O Function
CN1 CN702
1 POWER O Detection output of power switch 1 GND - Ground
2 MKEY I/O MIC data detection 2 8C O 8V DC power supply
3 PTT/TXD I/O PTT/PC serial data 3 FNC5 I/O Programable I/O (programmed by FPU)
4 HOOK/RXD I/O HOOK/PC serial data 4 FNC6 I/O Programable I/O (programmed by FPU)
5 ME - MIC ground 5 FNC2 I/O Programable I/O (programmed by FPU)
6 MIC O MIC signal output 6 FNC7 I/O Programable I/O (programmed by FPU)
7 GND - Ground 7 FNC8 I/O Programable I/O (programmed by FPU)
8 NC - - 8 FNC3 I/O Programable I/O (programmed by FPU)
9 LELH I LED latch input 9 FNC1 I/O Programable I/O (programmed by FPU)
10 LECL I LED clock input 10 NC - -
11 LECE I LED enable input 11 5C O 5V DC power supply
12 LEDI I LED data input 12 TXAFO O TX audio output to scrambler board
13 5C I 5V DC power supply 13 DATAI I External transmit signal input
14 KMI3 O Key matrix output 3 14 DETO O FM detector output
15 KMI2 O Key matrix output 2 15 NC - -
16 KMI1 O Key matrix output 1 16 ALTI I External alert tone signal input
17 KMO3 I Key matrix input 3 17 TXAFI I TX audio input from scrambler board
18 KMO2 I Key matrix input 2 18 RXAFO O RX audio output to scrambler board
19 KMO1 I Key matrix input 1 19 RXAFI I RX audio input from scrambler board
20 BLED I Blue LED control signal input 20 FNC4 I/O Programable I/O (programmed by FPU)
21 GLED I Green LED control signal input CN724
22 RLED I Red LED control signal input 1 SB O Battery voltage DC supply
23 MBL I MIC backlight control signal input 2 SB O Battery voltage DC supply
24 LEDM I LED dimmer input 3 SP+ O Speaker output +
25 SP- I Speaker input – 4 SP+ O Speaker output +
26 SP- I Speaker input – 5 SP- O Speaker output –
27 SP+ I Speaker input + 6 SP- O Speaker output –
28 SP+ I Speaker input + 7 LEDM O LED dimmer output
29 SB I Battery voltage DC supply 8 MBL O MIC backlight control signal output
30 SB I Battery voltage DC supply 9 RLED O Red LED control signal ouput
J1 10 GLED O Green LED control signal output
1 MBL O Backlight of Microphone 11 BLED O Blue LED control signal output
2 SB O DC Power putput 12 KMO1 O Key matrix output 1
3 GND - Ground 13 KMO2 O Key matrix output 2
4 PTT I PTT/ PC derial data from radio 14 KMO3 O Key matrix output 3
5 ME - MIC ground 15 KMI1 I Key matrix input 1
6 MIC I MIC signal input 16 KMI2 I Key matrix input 2
7 HOOK I HOOK/ PC serial data to radio 17 KMI3 I Key matrix input 3
8 DM I/O MIC data detection 18 5C O 5V DC power supply
34

TK-7302/7302(V)/7302H/7302H(V)
TERMINAL FUNCTION
Pin No. Name I/O Function Function Port Assignment
19 LEDI O LED data output Scrambler
20 LECE O LED enable output Name I/O
21 LECL O LED clock output FNC1 - -
22 LELH O LED latch output FNC2 - -
23 LERE O LED reset output FNC3 TX relay O
24 GND - Ground FNC4 Scrambler O
25 MIC I MIC signal input FNC5 Scrambler code 1(1) O
26 ME - MIC ground FNC6 Scrambler code 2(2) O
27 HOOK/RXD I/O HOOK/PC serial data FNC7 Scrambler code 3(4) O
28 PTT/TXD I/O PTT/PC serial data FNC8 Scrambler code 4(8) O
29 MKEY I/O MIC data detection GPS (NMEA)
30 POWER I Detection input of power switch Name I/O
J700 FNC1 None O
1 SB O Battery voltage DC supply FNC2 GPS (NMEA input) I
2 IGN I Ignition sense input FNC3 - -
3 SP2 O Speaker output FNC4 - -
4 DETO O FM detector output FNC5 - -
5 DATAI I External transmit signal input FNC6 - -
6 FNC1 I/O Programable I/O (programmed by FPU) FNC7 - -
7 FNC2 I/O Programable I/O (programmed by FPU) FNC8 - -
8 FNC3 I/O Programable I/O (programmed by FPU)

12 5C O 5V DC power supply
13 HR1 O Horn alert signal output
14 HR2 O Horn alert signal output
15 GND - Ground
35

A B C D E F G H I J
1 TK-7302/7302(V)/7302H/7302H(V) PC BOARD
DISPLAY UNIT (X54-3670-20) Component side view (J79-0249-09)

2
POWER
VOL UP
3
D22
D23
D37
D1
4
VOL DOWN
5
8
CM 7
HOOK
MIC
ME
J1
6 PTT
GND
D4
D2
S A
SB
2 MBL
1
8
DISPLAY UNIT (X54-3670-20) Foil side view (J79-0249-09)
R1 Q4
R10
R11
R12
9
Q3
C1 C36
D20
C30
R2
C38
C8
C42
C10
R39
C9
C45
D33
10
C39
R26
C29
Q1
Q2
R27
11
L1
Q5
R22
Q7
R37
C46
R7
R8
R4
R5
R6
R3
R40
Q8
R23
R34
C34
12
SB 30
POWER 1
R29
R28
R21
R41
SB
SP+
SP+
SP–
SP–
LEDM
MRL
RLED
GLED
BLED
KMO1
KMO2
KMO3
KMI1
KMI2
KMI3
5C
LEDI
LECE
LECL
LELH
NC
GND
MIC
ME
HOOK/RXD
PTT/TXD
MKEY
C27
CN1
Q9
Q6
R42
C47
13
36
14
J K L M N O P Q R S
PC BOARD TK-7302/7302(V)/7302H/7302H(V) 1
DISPLAY UNIT (X54-3670-20) Component side view (J79-0249-09)

2
J79-0249-09
Ref. No. Address

D1 4F
CH UP
D2 6E 3
D3 4N
D4 6I
D5 6N
D37
D3 D22 4D
4
D23 4B
D37 4J
CH DOWN
6
Component side
D5
B C r
Layer 1
Layer 2
Foil side
7
8
DISPLAY UNIT (X54-3670-20) Foil side view (J79-0249-09)
Ref. No. Address

9
IC1 12L
Q1 11C
C40
Q2 11C
C41
Q3 9F
C44
R38
Q4 9F 10
Q5 11J
Q6 13C
C43
Q7 11C
Q8 12C
Q9 13C 11
D20 9C
Q5
R36
D33 10C
C16
R35
24
13
C35 IC1
R34
CP1
C34 C32
12
12
1
CN2
C31
C33
Component side
Layer 1
Layer 2
13
Foil side
J79-0249-09
37
14
A B C D E F G H I J
1 TK-7302/7302(V)/7302H/7302H(V) PC BOARD
TX-RX UNIT (X57-7680-XX) -11: TK-7302(V) K -12: TK-7302H K
-16: TK-7302H(V) K -20: TK-7302 M -21: TK-7302H M
Component side view (J79-0247-09)
2
3
J701
J700
EXT.SP
D-SUB
11 15
4 6 10
1 5
C865
C863
C957
5 C866
C952
C855
C858
C861
C864
C840 C867
F700
C869
S 1 2
C850
C844
R848
D Q720 C846 +
C958 R845
R846
G
Q719
6
C835 8C
Q711
R839 R836
Q713
C853
C825
C339
C340
C817 C851
O R835
C824
G
Q712
IC706
4 1
3 3
G IC704 C816 8R R841 R933
C842
R837
D718
R934
IC707
+ C841
Q714
7 I
R785 C838 Q728
R931
8T R784 DETO
C831 3M 3C
C845
C837
IGN
O
Q707
R930
G Q718R932
RS232C RXD
C790
D
R869
C953
R928
R968
C819 + R782
R789
R929 D708 LV D701

C852
S D707 D705 D703

R783 D710
Q717
C821 R840 Q715 D700
C828
5C S
R842
10 C832 R843 S D D709 C729 C725 C723

C822
D G C732 C721
C829
8 C731 C727 C719

G
C954
R838 ETXD
R935
R950
C882 C820 FNC1 FNC2 FNC3 FNC4 FNC5 FNC6 FNC7 FNC8
R826
R886
ECLK
R823
C955
R999
R885 R979
R824
R827
C880
C883 Q723 RXD CN702

C856
CP706 CP702
C881
R825 1 GND 8C 2
R817
S R818 R821
R852 R850
BSFT
R851 R819
R884 R951 FNC5 FNC6

3 4
IC708
1 5
D C814 TXD CP700 FNC2 FNC7

G ERXD C854 R701 FNC8 RESET
D715
R820 FNC1 SIGOUT(L)

Q721 1 8 EPM R980 CP704 VCC TXAFO
C833
9 R875
EBSY
C788
SIGOUT(H) DISC
BEEPOUT(H) BEEPOUT(L)
IC703
C780 R703 TXAFI RXAFO

C813
26
IC705
50
R847
R780
R774 R812 19 RXAFI FNC4 20

51 25 C701
+ 4 5 R811 Q722
R807
C839
Q710
R892
R808
R834
R833
C919
C847
R792
R959
C750
R960
R831 R891 Q731
R806
R832 R829
Q732
R883
R863
C920 R961 C931
C797
10
IC702
C809
C810
R793 R861 C808

R791 R859
C807 Assist
R815
C937
C938
C795 Voltage
R962
C932
C19
R803
AF Out FMIC Out

R876
LV
R978
1
C891 CNVSS XOUT
C890 75 1
Mod2 IC709
76 100 RESET
1 4 R854
11 R952
CP705
R853
C868
C870
CP701
2 3
R797
L702
C796 R860
R796
R798
C708
C706
R799
Mod1
R800
R871
R870
R894
R801
C898
UL
R873
R794 R795
R895
C794
R786
R765
C792
C704
5M
C889
R503
C793 R787
D500
R790
R874 R505 C515
R981
R983
R984
R985
R991
R992
R993
C512
R982
R986
R987
R988
R989
R990
R994
R995
R996
R997
SQIN
C887 RSSI
R506
C513
C514
R507
POWER C915 C511

12 R998
R977
D501
C510
30 POWER
R504
1 SB
R508
R855
SB
SP+
SP+
SP–
SP–
LEDM
MBL
RLED
GLED
BLED
KMO1
KMO2
KMO3
KMI1
KMI2
KMI3
5C
LEDI
LECE
LECL
LELH
LEDE
GND
MIC
ME
HOOK/RXD
PTT/TXD
MKEY
R857 R858
R939
D702
D704
D706
R736
CN724
13
38
14
J K L M N O P Q R S
PC BOARD TK-7302/7302(V)/7302H/7302H(V) 1
TX-RX UNIT (X57-7680-XX) -11: TK-7302(V) K -12: TK-7302H K

-16: TK-7302H(V) K -20: TK-7302 M -21: TK-7302H M
Component side view (J79-0247-09)
2
Ref. No. Address

IC301 4K
IC702 10F
IC703 9D 3
IC704 7B
IC705 9B
IC706 7G
IC707 7F
IC708 9H 4
IC301
IC709 11H
Q501 12K
Q507 12K
Q707 7D
Q710 9H 5
Q711 6C
3 4 Q712 7C
Q713 6C
Q714 7C
TH301
L308
Q715 8D 6
C376
Q717 8F
L309 C344
C339
C340
C336
Q718 7G
C341
C338
L310
L312
Q719 6C
L311
Q720 6B
R353
Q721 9D 7
IGN Q722 9H
C717
C362 C361
Q723 9D
C956 C360
Q728 7G
C700
Q731 10H
C711
C713
C705
C715
C703
C709
C707
C702
R940
ALTI
Q732 10H 8
TXAFO DETO RXAFO DATAI TXAFI RXAFI EMGMIC D500 12I
TVCO D501 12J
8C 2 D700 8I
C6
C7
ET D701 8I
(L)
FO
SC
T(L)
RVCO D702 12G 9
FO
C4 20 D703 8I
D704 12F
D705 8H
D706 12G
D707 8H 10
D708 8H
D709 8H
D710 8G
BPF
D715 9H
D718 7H 11
Component side
05 C515
Layer 1
C514
R507
Q507
Q501 Layer 2 12
J79-0247-09
R520
Layer 3
R519 Layer 4
Foil side
13
39
14
A B C D E F G H I J
1 TK-7302/7302(V)/7302H/7302H(V) PC BOARD
2 TX-RX UNIT (X57-7680-XX) -11: TK-7302(V) K -12: TK-7302H K

-16: TK-7302H(V) K -20: TK-7302 M -21: TK-7302H M
Foil side view (J79-0247-09)
R374
C383
L316
4
C381
L315
C894
C374
L314 TH300
5
C373
C372
C366
C365
C364
TH302
C384
C947
R382 C392
6
L313 C351
D313
D312
C333
R329
R330
Q300 S
C945
C350
C348
C314
C316
R324
R325
G
D
R361
L301 L300
C367 C303 L302 L303 L304
D302
D303
L311
L312 C322
C302
R303
D300
C313
R358 R964 L305
R355
C301 C315
R321 R323
R347 C94
R376
C307
C305
7
C317
C300 R306
C363
C320
+ R64
D304
R354
D305
R352
R37
L4 R69
R357
D16
C946 Q733 R21

R35
8 C105
R36
R28
C102
R80
L707 C935 + R34 R30

D311
R79
R29
L708
C35
D310
L704 C103 C104

C46 Q3
C49
C602 C391 C36 R970 + +
C106 L28 D15 C23
R25
R367
C603
R33
D314 L39
C45
C43
R383
C40
CN507
R972
R82 R16 L27
R348
R381
C368
R370 C934
C68
R48
D17 C24
C601
R369 D719
D1
R388 R384 R52
R62
R387 R345
C85
R58 Q5
C E Q8
C E
R75
Q7
5 4 D720
B
G L3
R61 C87
R577
C77
C72
R49
1 16
C86
L518 R333 C84 D

R342
R375
Q 10
R56
S R12 R76
IC300
R973
C599 CN2 C90
9
C939 C941
IC1
L25 Q9 C71
R341
C940
C598 R334
R881 R880
R60
L26
C80 +
L24
D510
C949
C89
R57 R55
C81
C342
R331
C597 8 1 R53 C82 C67

C596 C83 R54
C595 R59 C88 8 9
D509 C594 C355
C587 C585 D301 C98 R74
C593 C32
CN506
C78 L37
R572
C354 C73 C933

R327 C79 R77
L35
R563 D4
C37 C41
R20 R23
L20
R78 C76
R51
L517
C69
R349 R573
R346 C592
R343
R576 C606
R336 R338
1 8
R568 R564
C589 R732
5 4
C75
R26
D
S
C591 L34 Q6
S
L19
IC2
G
IC501
C74
C588 R46 R50 G Q12

Q4
D D14 8 1
D12 C66
R566 R569 R570 C65 R32

C54 R38
L30
D9
G
10 Q506 R574 C62 C70 D R893
S C34 R68
R65
R31
R567
C590
4 5 S
GD
GS
D
L29
C64
C57
D7
L33
C586
C582
R565
R975
R733 C95 Q11 G

D10
C942
R976
D13
L21
D5
R47
CN504
L706 R974 D11 L36 C48

R560
R83
R562
R561
C61 R45
L514
C554 C546
C561
L18 D6
C99 C92
R63 C91
R40 C56 C59 L38

L31
L515
L32
R589 L504 L9
BPF
R39
R41
R43
L7
C879
C878
C583 C58 L17

CN505
D508 R547 C63 D8

Q500
C581 C504
C563 C562
R546
C501
C505
C559
R879 R878
C576 C578 R502

L503
11 C577
R545 C560
Q504
R500
L501
D506 R953 R553 GS R534 C506 C500

C575
R550 R548
C550
R541
L505
R591
C574 R954 C565 C509 R501

R15
GD Q510
CN500
C526
C573 R549 C558 C508

R539 C553
C556 C524 R512 R590

R543 R537
TH501
XF500
R510
L506
C551
C564 C557 C525 R511

L512
R515 C520
C555
R544
R530
R528
C529
R518
C527
9 8
C518
R513
R527 R533 Q511

C545 C543 C541
R517
IC500
C522
C523
12 R531
C521
Q502
C528
J79-0247-09 R525 10 1 CF501 CF500
C538
C517
C531
C530
R509 CD500
C516
C519
R522
R524
C535
13
40
14
J K L M N O P Q R S
PC BOARD TK-7302/7302(V)/7302H/7302H(V) 1
TX-RX UNIT (X57-7680-XX) -11: TK-7302(V) K -12: TK-7302H K 2

-16: TK-7302H(V) K -20: TK-7302 M -21: TK-7302H M
Foil side view (J79-0247-09)
S Ref. No. Address Ref. No. Address
C886
3
IC1 9J D4 10H
R888
D Q724 C885
IC2 10J D5 10F
R889
G C857 IC300 9D D6 10H
Q725
C859
IC500 12F D7 10F
R890
C860
C862 IC501 10D D8 11H
4
IC700 12L D9 10H
IC701 10N D10 10E
R849
IC710 8N D11 10F
Q3 8F D12 10G
R887
Q4 10F D13 10G

D717 5
Q5 9H D14 10H
Q6 10G D15 8H
Q7 9G D16 8G
Q8 9G D17 8F
Q9 9G D300 7F
6
Q10 9F D301 9D
R330
Q11 10I D302 7B

R324
R325
Q12 10I D303 7C

Q300 6I D304 7A
C884
R323 C926
+ C849 Q500 11J D305 8A
7
Q502 12E D310 8C
+
Q504 11C D311 8D
Q506 10B D312 6C
R864
Q510 11J D313 6C

Q511 12J D314 8D
CN751
C922
8
Q701 12K D506 11A
C23 C921
R25
C27
R965 Q702 12L D508 11A
R972
IC710
2 3
1 4
C26
C24
Q703 12N D509 9A
D1
R862 R957
C20
C918
R75 C8
C4
Q705 11M D510 9A
Q730
C767
C768
1 16
R6
R5
R749
C11
C770
R958 Q724 3L D711 11K

C843
C7
9
IC1
R752 R742
C14 R896 C929 Q725 4N D712 12L
R7
C917 R955
R755 C930 C765

8 9 C2 +
CN709 C764 Q729 9K D717 5N
Q729
R761 R763
R735
R734
R74 C15
C98
C17 1
48 37
36
Q730 9M D719 9F
C753
5 4 R956 Q733 8G D720 9F

C758
C755
X1
C5
IC2
L2
R726
8 1 IC701 D1 9J
C779
R73 R724 R725

C784
C10
10
R10
R771
C34 R68
R31
R8 CN708
R938 C927 12 25 R781
R776
C16
C18
13 24
R737
C22
C928 R767
R773 C756
R778
C760
C762
C48
CN710
R3 CN711
R718 C948
LV
R729 C745
R877 R730 R751

C777 C775 C773
R762 R754 C772
R712
R739
Q
C771
C501
R899
R760 R759 R748

R727
11
R865
R500 C874
C500 Q705 R753 R756 R967 R728
G R770 C774
R591
R704
R15
R747 C769
C877
Q510
R719 R720
R779 C787
C746 D
R741
S R775 R766 R764

C923
R590 D711
D712
R758
R743 C763
C778
C785
C781
C925 R882 Component side

R738
R711
R544 R731
C749
C754 C876
Q701
Q511
R705
Layer 1
R723
C748
1 8 R868
Q702 C875
G
IC700
S
C950
D
R722 CN723 Layer 2 12

C747
C743
R716
R708
C744 4 5 L700
R714
R856
R709 C735
R713
C736
R710
00 R715 C924 Layer 3

R802
C740 C739
Q703
R867
Layer 4
Foil side
13
41
14
A B C D E
TK-7302/7302(V)/7302H/7302H(V)
SCHEMATIC DIAGRAM
1
1 1 1
R7 1k
PLCK
R6 1k R25 R30 R35 R21
PLDT 0 1k 1k 0 L4
R5 1k
PLLE
2.2k
R34
R37
10k
100p
100p
100p
100p
100p
0.047u35
C11
C14
C8
C4
C7
0.1u35
1
+
C43
C49
R973
R972 10
1u35
+
C45
R69
PLPS
0
16
15
14
13
12
11
10
1k
9
UL IC1
ZC
CLoCK
P
PS
R
LD/FoUT
LE
MB15E03SL-E1
DATA
PLL
3.3C IC D15-17
oSCoUT
TX/RX FIN
1000p
C928
C927
oSCIN
R956
0.1u
560
FILTER SWITCH
GND
XFIN
VCC
FIN
Do
VP
1.59V C98 C933 C934 L39 R16
8
5
2
C941 7
1000p 1000p 3.5p 68n 0
2 Q729 R955 C17
470p
56k 0.1u
C35
PLL IC 0.65V
22n
10n
R74
L28
L27
6p
56
CLOCK AMP
R76
R75
3.21V
0
C917
Q729 PLL
C103
C105
C102
C104
20p
D1
27p
39p
4p
6p
C36
KTC4075E(Y,GR) FIN AMP
8p
C23 C939 PLL UNLOCK
DETECTION C935 3.10V
X1 3.28V 0.1u 0.1u Q3
R79 15k
R80 15k
HSC277
HSC277
1.12V 1000p
L77-3055-05 2SC5108(Y)F
D15
D16
R938 C24 C940
1SS389-F
0 1 4 R10
0.01u
C26
D1
VCoNT VCC 10u 10u
L704
27n
10
R28
R15
R33
R36
27k
0.1u
C10
0
C18 0.1u
C22 10u
0
1000p
C16 1u
47k
R12
C2
R73 L2
10
1.88V
0 4.7u
C106
47p
2 3
C40
R970
39p
0.1u
C27
47k
GND oUTPUT
R29
180
R82
L3
1.5k
C15
8p
R8
TCXO 15k
HSC277
1000p
C46
D17
Q733
Q733
19.2MHz RT1N441U TX/RX FIN
FILTER
3.3M
3.3C
3.3C
3.3C
3
5C
5C
CONTROL
9C
5C
9R
3.3C
R502
100
ASSIST FILTER 9CL

R500
1.2k
0.01u
L501
C504
470n
470p
7.54V
C34
CN1 TX/RX
IC2 Q11,12
0.1u
C48
R83
RX 2nd LOCAL
1k
CV
C500
R31
BD7542FVM
1M
47p
DOUBLER AMP ASSIST FILTER 9CL

0.73V 8.54V 1 8 CONTROL SWITCH
CN3 VCC Q11
R501 C506 C509 7 SSM3J05FU-F
R68
0
R32
330k 10p 0.01u 2
0
C41
R23
33p
22k Q12
3 6 R65 R893 2SK1830F
C501
C505
C508
560n
L503
27p
18p
30p
Q500 4 5 10k 0
470p
2SC5108(Y)F VEE
C5
0.1u
C95
R26
15k
470p
C37
C32 R20
470p 1k
4
R522 9R
0 CN503
1000p
1000p
1000p
0.01u
C538
C563
C535
C564
R546
R548
R524
680k
390k
100
R : 8.72V
C559
470p
MCF
R545
220k
R : 2.50V CN505
XF500
R527
220k
R : 8.24V
470n
L505
38.85MHz R550 C565

R528 C541 R530
0 0.01u 390 R534 C550
33 470p
R541
C556
3.3k
R549
15p
150k
Q502
330 0.01u R : 2.15V
2SC5108(Y)F
470n
R : 0.73V
L506
Q504
IF AMP 3SK318
RX 1st
R525
C543
C545
18p
MIXER
1p
0
2nd LO 38.4MHz
R : 0.90V
1000p
0.01u
C558
C557
R539
47
9R
1000p
0.01u
C560
C562
R547
1000p
150
C553
C555
5
0.1u
5C
W : 4.96V
N : 0V
1000p
C516
R509
WIDE
10
FM IC
C510
R506
R504
0.1u
10k
10k
CF500
C531
0.01u
C530
C519
C517
470p
0.1u
4.92V
10u
IC500 SQUELCH
R590
C511 C513
C528
82k
33p
TA31136FNG INPUT SWITCH ASTC

D500 0.1u 0.1u D501 1 16 Q511
MC2858 MC2858 oSCIN MIXIN R531 R533 R544
D500,501 KTC4075E(Y,GR)
R591
2 15 0 0 82k
0
W/N CF C521 oSCoUT GND

SWITCH 0.1u Q501
R508
470k R537
3 14
R503
R543
CF501
10k
56k
82k
10k
MIXoUT N-REC RT1P441U

C551
0.33u
C512 C514 4 13
6 VCC N-DET
TH501
0.1u 0.1u CN501

CD500
C522 0.1u 5 12
-t
R519
R505
3.3k
SQIN Q510
10k
R507
IFIN RSSI
10k
C523 0.1u C527 RT1N441U

R520
6 11
2.7k
DEC IFoUT
68p SQUELCH
W : 0V 7 10 Q501,507 INPUT CONTROL
N : 4.96V NARROW
FILoUT QUAD
DISCRIMINATOR SWITCH
C518
330p
R513
100k
8 9
R517
Q507 CONTROL
FILIN AFoUT
0
C520 RT1N441U SWITCH

ASTSW
330p
C515
0.1u
SQIN
0.01u
C529
R518
R515
4.7k
33k
R511 C524
CV
CN500
82k 1000p
R510
2 2
R512
WIDE
2.2k
2.7k
1000p
C526
C525
RSSI
4.7u
CN502
RSSI
NARROW
DISC
FREQ
7
42
X57-768 1/6
F G H I J

SCHEMATIC DIAGRAM TK-7302/7302(V)/7302H/7302H(V)
1 1 1
Q4 C73 6p TX/RX
R : 7.06V R : 1.20V Q9,10 VCO BUFFER AMP
TX/RX
RX VCO BAND SWITCH
L30 C56 R40 D7 L19 Q4 C79 R77 2.42V R : 0V
0.74V 5.34V 6.80V
4.7u 100p 0 1SV325F C62 120n MCH3914(7)-H 1p 0 2.65V T : 3.32V
Q10 CN2 D719
Q9 C84 C86
33p 2SC5108(Y)F 2SC5108(Y)F C90 R61 HVC131
18p 5p
1SV325F
15p 0
C69
D10
27u
27u
L20
L34
4p
D720
2.2k
R62
C949
HVC376B
HVC376B
100n
L33 10u
R60
12p
100
L26
HVC131
100n
8.2k
C85
R56
R57
L25
10k
C75
D13
R53
5p
27k
D5
3p
Q5,7
1SV325F
R : 3.36V
1000p
D11
C65
R50
TX/RX VCO
270
T : 0V
1000p
1000p
C89
R59
SWITCH
100
C81
1000p
R55
100
C87
R58
100
R63
D4-11,13,14 R : 0V Q5 7.50V
4.7k
1000p
0.01u
1000p
T : 7.38V
C91
1000p
C92
2SJ347F
L31 1.8u
L32 1.8u
C83
R54
C88
FREQUENCY CONTROL
470p
C99
(TX/RX VCO)
R46
100
Q7
1000p
1000p
C71
C67
KRX102U
L9 L24 9CL 9C
9R
1000p
C58
R52
1000p
1000p
100k
C68
C72
R48
470
R47
1k
Q6 R : 3.15V
C78 R78
C74 8p T : 8.85V
T : 0V
0
TX VCO TX DRIVE AMP 9T
T : 4.10V T : 0.90V
L35 D6 C61 L18 Q6 Q300
1p
0.022u
1000p
100p MCH3914(7)-H
C313
C315
120n
L305
4.7u C54 R38 1SV325F 150n RD00HVS1-T113
T : 2.78V
47p 0
1SV325F
C300 L300 L301 L302

0.75p
L21
C64
27u
27u
L37
100p
D8
18n 10n 22n L303 L304 C322

MVC376B
MVC376B
L29 10u
12n 15n 270p RF
C76
D14
6p
D4
R303
4.7k
C301
C303
C302
4.7k
R64
7p
8p
9p
1SV325F
1SV278F
C316
1000p
C314
R51
C70
C66
D12
8p
6p
150
D9
5p
TX : LO
RX : HI
1000p
C307
R376
10k
1000p
T : 2.78V
C94
R45
9CL
47k
D12
L36 1.8u
L38 1.8u
C305
470p
R306
22k
MODULATION 7.51V Q8 9.03V
CONTROL (TX VCO) KTC4075E(Y,GR)
100p
C63
9T
L17
L7
R43
470p
470p
4.7k
C82
C77
R49
100k C546 L706
1000p
C57
7p 22n CN504
8.20V
100k
R41
10u16
R39
39k
C59
10u
+
C80
RIPPLE R974 L504 C554
FILTER
39 27n 8p
C561
470p
C878
C879
C942
R976
R975
22p
15p
12p
150
150
TX/RX
R589
0
9CL 9CL
3
9C
9R
9T
9C
5C
9R
3.3C
R : 9.01V
D506,508 R560
0
1000p
RF BPF
R561
C582
L514
68n
1k
TUNING
D509,510
RF BPF
1000p
R : 8.16V
C588
R566
R569
100k
100k
R553 R953 R954 C575 C577 TUNING

0 0 0 4p 1p C583 L515 R562
R : 7.58V CN506
470p 22n 82 C595 C597
C578
C574
56p
56p
C591 R572 3p 3p
Q506 CN507
FRONT-END
3SK318
C581
470p 0
C573
LNA
L512
1.5p
C598
C594
2p R577
56n
56p
56p
1p
R : 3.62V C601 C603

R878 1M
R879 1M
1SV305F
1SV305F
0
R : 2.28V 4p 18p
D506
D508
L708 C946
C593
C599
L517
56n
3p
68n
R880 1M
R881 1M
24p
1SV305F
1SV305F
1000p
C586
1000p
C590
D509
D510
R570
R565
R567
560k
220
68k
L518
C602
56n
L707
68n
7p
1000p
1000p
C576
C596
3
9.03V
9C
IC501
R563
HA17358BFEL-E 3 3
0
C587
R576
1 8
TXAFO
EMGMIC
TXAFI
VCC D711,712
0
1u 7 C592
C589
470p
R568
MIC AMP AGC DETECTION

22k
1u
C606
470p
R573
2
22k
C585
0.1u
R882 C876
1u
3 6 D711 SCRAMBLER
R564
22k
C877
MC2858 R719 SWITCH

4 5
1u
D712
R574
VEE 0
22k
1SS372F Q705
82k
R731 SSM3J05FU-F
RF BPF TUNING C749 100k
APCC
MIC MUTE R720

TVC
C746
VOLTAGE DC AMP
R711
10u
0.1u
820
SWITCH 100
R751 C772
ASTC
1u
ASTC MIC/MOD AMP

Q702
2SC4919 IC700
100k
NJM2100V-ZB
C744
470p
R716
17 1 8 R868 3.3C
0
VDD
CN723 7 0
C748
R723
3.24V
330k
39p
C739 R714
L700 0.1u 22k C747 R722
R725
2
47k
0.1u 2.2k 3 6
R715
R705
22k
680
1.62V 4 5 R867
VSS
0
R802
C924 C754 0.1u

0
C740
Q701
0.1u
R726
R704
2SK1830F
47k
5C R708 1u
1K
C925 1u
4.7k
MIC MUTE
M1MUTE
M2MUTE
SWITCH
SCRSW
ME
2 2 2
17 17
HSDO
MIC
DISC DISC
FREQ FREQ
43
X57-768 2/6
K L M N O
TK-7302/7302(V)/7302H/7302H(V)
SCHEMATIC DIAGRAM
AF
ANT
1 1 1
R354 R357
*IC301 0 0
R355 R358
RF_oUT
POWER
COUPPLER
RF_IN
R374
MODULE 0 0
VGG
VDD
0
R352
D302 C365 C373 C381
68
FORWARD POWER
1
2p 4p
3
L407CDB
2
4
1000p
L311 D303 C366 L314 L315
1.5T L407CDB 1000p 5T 5T
R324
C351
D302-305
1000p
0
C341
C338
C344
100p
9p
C383
C372
C364
C374
C894
22p
L316
9.5T
20p
12p
15p
15p
2p
L313
L312
REVERSE POWER
9.5T
ANT
5T
R323 SWITCH
R347
R964
39
680
100
T : 0.81V
C368
C367
L7091CER
L7091CER
R321
C363 5p
R329
R325
43p
L308
L309
L310
2p
150
150
1000p
47
C361
0.01u
C360
R353
D305
D304
100
T : 8.91V
R361
R367
180
120
9T
C333
470p
1000p
C340
C350
C336
C339
C348
C945
470p
220p
100p
47p
22p
1000p
0.01u
C956
C362
D312
C354
REVERSE 6
R330
POWER RECTIFIER
0
DC AMP (APC) 0.1u

C355
R348
R388
R387
100k
100k
100k
VREV D313
IC300
R334
MA3J742
10k
HA17358BFEL-E 1000p R382 D312

R327 1 8 R341
0 HSC277
1000p
1000p
VCC
C392
C947
100 7 0
R331
C342
150k
0.1u
UDZW5.1(B)
4.7u10
1000p
R342
100k
2
C320
C317
D300
D314
+
6
3 6 MA3J742
R384 R383
RF
4 5
R336 R333
R375
TEMP1
100k
VEE 0 0
10k
1000p
C391
R381
TH300
TH302
1000p
1000p
1k
C926
C384
UDZW3.3(B)
UDZW3.3(B)
100k
100k
VFRD
R370 100k
R369 100k
R345
-t
-t
D311
D310
VOLTAGE
0
PROTECTION 100k D313,314 5

R343 R346 R349 D301
POWER 4
0 47k 0 1SS355 RECTIFIER TEMP DETECT
*R338
REVP 6
TX POWER CONTROL TEMP2
FWBP
TH301
1000p
C376
100k
-t
D310,311
VOLTAGE PROTECTION 5
9T
B
5C
3.3C
LSDI 4 4
3 3 3
RXAFO
DATAI
ALTI
RXAFI
HSDI
R710 C735
120k 0.1u
C875
C874
1u
1u
Q703
C743 KTC4075E(Y,GR)
0.033u C736 R939
R736
DETO
0
4.7u 0
R712
100K
R753
R758
R709
560
R766
R713
100k
560
6.8k
0
R765
R738
5.6k
0
R764
C769
R756 C774
1u
1u
6.8k
5600p
DET AMP
R743 C763
C778
R762 C777
0.1u
1u
LPF (D-SUB)
R727
R760
R747
100k
100k
47k
0
100k
100k
R728
0
R748 R754 R759

C948 R729 100k 100k 150k
10u 0
R899
R739
0.047u
R770 R775 R779

C745
LSD0
R967
0
0
R718 0 47k 47k

CN710
3300p
3300p
C785
C787
100k C771 C773 C775

100p 100p 390p 3
R773 R778 R781 HSDO
24
23
22
21
20
19
18
17
16
15
14
13
C760
C762
0.1u
4.7k 47k 100k

1u
R767
R730
MoD1
39k
SYSCLoCK1
MIC
AVSS1
MICFB
MoD2
DISC
DISCFB
GPIo2
DVSS2
ALTFB
ALT
1.60V
0
25
VBIAS Q731,732
R737 12
26 GPIoB MCU CLOCK AMP
AUDIooUT 11 R877
27k 27 GPIoA 5M
C756
390p
AUXADC1 47k
CN708 28
AUXADC2 10
1000p
C931
0.01u
C938
C932
C937
470p
R960
CN711
0.1u
2.2k
C750
R962
29 GPIo1
0.1u
1.5k
3.24V AUXADC3 9
VDEC9
3.3C
R724 30
AUXADC4 IC701 5M
0.01u
C779
C784
0 8
10u
31 CD686Q3 IRQN 2.15V

AVDD 2.03V
32 7
AUXDAC1 BASEBAND IC DVSS1 R959 R961 C19 XIN
C753
C758
C755
470p
0.1u
10u
6
R741
33
56k
AUXDAC2 BooTEN2 R771 C919 C920

5 180k 180k 0.01u
34 15p 0.01u 3
AVSS2 BooTEN1 0
4 Q732
R733 10k EPSCSN 0.74V 0.66V 2SC5108(Y)F
C923
0.1u
APCC 3 Q731
EPSo
CoMMANDDATA
R732 1k 2 2SC5108(Y)F
SBC
SERIALCLoCK
TVC EPSCLK
XTAL/CLoCK
SYSCLoCK2
1
REPLYDATA
R3 R734 1k 35 EPSI
AUXDAC3 IC710 R774 R780 BEEP
330k
VDEC2
DVSS3
DVSS4
XTALN
R735 1k 36 VOLTAGE 2.2k 2.2k

DVDD
0.068u
0.068u
C780
C788
ASTC AUXDAC4
CSN
REGULATOR
NC
(3.3V)
3.3C
41
40
38
39
43
46
48
45
42
37
44
47
5M
1000p
C930
C929
R958
0.1u
560
1000p
17
CN709
C921
C922
R761
R763
R755
R752
1u
C20 R862 R742

XC6221B332NR
100
100
100
100
VIN
VoUT
R957 0.01u 0 0
IC710
C918 56k 1.60V C770

R896
120p
0
10u
VSS
C765
R776
CE
10k
0.65V C767
10u
CDATA1
RDATA1
R965 1
SCLK1
Q730
CSN1
0.1u
IRQ1
C764
R749
KTC4075E(Y,GR)
47k
0
C768
0.01u
BASEBAND IC 7 7
CLOCK AMP 470p
MIC
17 3.30V
3.3C 3.3C
HSDO 2
MIC
X57-7680-XX IC301 R338
DISC -20 TK-7302 M S-AV33A 15k
FREQ -21 TK-7302H M RA60H1317M1A 22k
-11 TK-7302(V) K S-AV33A 15k
2 2 -12 TK-7302H K RA60H1317M1A 22k
-16 TK-7302H(V) K RA60H1317M1A 22k
44
X57-768 3/6
P Q R S T

AF AF
1 1 1
UL
PLPS
TX/RX
3.3M
R815
R808
8 8
1k
10 10 AMPSW
0
6
LEDM
MBL
3.29V
EEPWP
EEPDI
EEPCK
FWBP
REVP
C809 10
11
R870
0.1u
R861
0
R875
SBC
9TC
0
3.3CC
0
C810
R876
R978
C891
C890
470p
470p
47k
R871
RLED
0
1000p
6 GLED
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
8
IRQ1
SBC
3CC
NC
9TC
LEDM
MBL
IGN
PLPS
AMPSW
CSN2
KSSW
VSS
GLED
FWDP
VCC2
RLED
SCRSW
IRQ2
EEPCK
DST
EEPWP
REVP
TXRX
EEPDT
IRQ1
76
BLED BLED
6 CP705 1k
77 50
KMO1 KMO1 9RC 9RC 11
78 VCC2=3.3V
KMO2 KMO2 49 SPMUTE
SP MUTE
R895 1k 48
79 CSN1 CSN1
KMO3 KMO3 47 1
R894 1k 80 SCLK SCLK1
KMI1 46
SCRSW
RDATA RDATA1
CP701 1k KMI1 45
81 CDATA CDATA1 7
KMI2 KMI2 R820
82 44
KMI3 KMI3 ECE
83 43 R951 47K PA
UL PA
84 42 0
AF MUTE PLCK PLCK
85 41
M1MUTE MIC1MUTE PLDT PLDT
86 40
M2MUTE MIC2MUTE PLLE PLLE
87
4 4 HSDI HSDI CN716 R935
88 39 EPM 47k
R790 LSDI LSDI EPM
12k 38
LPOSW CN750
8 R794 37 R817
1000p
10
C793
1k 89 BSFT
2 TEMP2 TEMP2 36 0
PTT PTT/TXD 7
R795 90 IC702
5 TEMP1 TEMP1 R823
F364AEDFBKCUA R818 1k
R787 1k 35
HOOK HOOK/RXD
MCU 0
15k 34 R826
1000p
CN718
C792
BATT RXD
RXD
DETECT 22k
CN720 8
R792 R791 91 TXD R824 R827
SB BATT 33 1.5k 47k
130k 1k TXD
1000p
1000p
C795
C797
R793
18k
CN717 R950
32 EBSY 47k
EBSY
R796 1k 92 CN719 R999
RSSI RSSI 47k
31 ECLK
R797 1k 93 ECLK
SQIN SQIN
CN721
R860 R798 94
5M
30 ERXD
AVSS ERXD
0 0
C796
CN722
1u
R786 ETXD
95 29
5M
R979
CV CV ETXD
0
1k
R980
C794
470p
0
5.01V 96
VREF 28 3.3M
L702 97 FNC1
AVCC 27
98 FNC2
NARROW NARROW 26
99 VCC1=5.0V FNC3
WIDE WIDE 5M
R952 100
HORN
0
POWKEY
ASTSW
CNVSS
RESET
HSDO
MKEY
XOUT
VCC1
FNC8
FNC7
FNC6
FNC5
FNC4
BEEP
LECE
LSD0
LERE
LECL
LELH
LED0
2
5CC
VSS
XIN
INT
E
11
21
1
10
20
13
16
18
19
23
3
15
25
5
2
12
22
4
R806 14
17
24
LSD0
CN749
R803
R811
CP700 1k
CP702 1k
CP704 1k
CP706 1k
R863
R799 1k
R800 1k
R801 1k
R873 0
R874 0
1k
0
10k
CN704
1000p
R807
C807
CN712
CNVSS
HOOK,PTT
HSDO
0
R928
4.7k
CN714
RESET
R929
C808
0.1u
4.7k
R812
R977
47k
47k
FNC1
FNC8
FNC6
FNC3
FNC5
FNC2
FNC7
FNC4
5.01V 8
R859
8
POWER
0
HORN
MKEY
LELH
LECE
LECL
LERE
LEDI
R883
13 13
0
8 8 8
5M 5M 5M
5M
CN713
XIN 19.2MHz
3 3 3
10
5CC
RST
INT
SBC
SBC 9 9
ASTSW
BEEP
10
D715 R829
3.3M
3.3M
FB
EEPWP
VOLTAGE 0
PROTECTION IC703
EX24064ASAS0A
R825
3.29V
47k
10
Q710,722 1 8
R821
R819
A0 VCC
470
R783
OVER 2 7
47k
VOLTAGE EEPROM A1 WP
3 6
R789
DETECT
4.7k
A2 SCL
Q707 SWITCH
UDZW18(B)
R782 4 5 R833
KRC414RTK VSS SDA
D715
1k Q722 10k
R785 KTC4075E(Y,GR) R891
0 R831 0 7
2
1000p
C790
1M EEPDI
R784
100k
R892 R832 0 R834

Q710 EEPCK
1000p
7
C813
RT1N441U 0 C814 10k

MIC
IGNITION SENSE 1000p
CONTROL SWITCH IGN
2
ME
7 7 7
MIC
ME
45
X57-768 4/6
U V W X Y
TK-7302/7302(V)/7302H/7302H(V)
SCHEMATIC DIAGRAM
AF
Q715,723
IC705
SP MUTE SWITCH LA4600
POWERGND
C821 R842 R843 AF AMP
PREGND
1u 82k 2.2k
FILTER
R840
OUT2
OUT1
68k
VCC
STB
P_P
IN1
IN2
R : 3.28V
R838
1
10
3
5
2
7
4
Q715
4.7k SSM3K05FU
1000p
+ CN751
C820
C822
AMPSW C832 C954 C955
470u16
1u
R849 C849
+
4.7u16
47u16
C839
C843
+
+
0.22u 1000p 1000p
C882 R886 C883
470u16
R887 C884
0
1u 82k 0.22u
R885
J701
68k
R : 3.28V EXT
R847
390
C862 1000p
0
C860 100p
SP
C857 22p
C859 47p
R884
22p C865
22p
Q723
4.7k SSM3K05FU Q721
1000p
C881
C880
1000p
1u
Q721
C847
AF AMP
C863
SWITCH RT1N441U
1000p
5C
C833
11 Q713 IC704
SP+
SP2
SP-
SPMUTE 9R SWITCH VOLTAGE REGULATOR (9V)
12 12 12
B
B
FB
FB Q720
SB
SB SB SWITCH
12 11 IC704 C840
9C TA4809BF 13.6V
13.60V 13.60V
CN725 Q713 CN726 1000p Q720 F700
PA 9R 9C
2SB1694 2SJ645 4A
2 1
9R oUT IN
1000p
C855 1000p
C866 1000p
C844
1000p
1000p
22u16
R839
R848
R:
C831
C858 220p
C861 470p
C867 470p
C869 220p
C850
C816
C825
C835
C824
GND
47k
47k
+
0.1u
0.1u
0.1u
C952 22p
C864 47p
C957 10u
9.02V
Z5W27V
3
D717
Q711 9.04V
R836
4.7k
R846
1000p
220
C846
9R CONTROL SB
SWITCH
R845 Q719 D717
9C
9RC
Q711 Q719
Q714 9T SWITCH 1k SB CONTROL VOLTAGE
FB
C958
RT1N441U 1u KTC4075E(Y,GR)
CN727 Q714 SWITCH PROTECTION
9T 2SB1694 4.97V Q717
9T 5C CONTROL SWITCH IC707
5C IC707
R841
22u16
C819
47k
+
Q717 5.02V TA7805FQ VOLTAGE REGULATOR

T : 8.95V CN728 (5V)
SSM3J05FU-F 5M
2 1 IC709
R837
oUT IN
1.5k
Q712 VOLTAGE
1000p
10u10
0.01u
0.01u
C829
C845
C953
C842
C852
C837
GND IC708
+
0.1u
2.2u
RT1N441U DTECTION
R968
100k
R835 3 VOLTAGE (MCU RESET)

9TC DTECTION (INT)
10k 5M 5M
0.01u
C817
11 3.24V
3.3C
1000p
C851
R851
C853
470k
IC708
1u
CN729 Q718 CN730 3.29V BD4740G

5C SSM3J05FU-F 3.3M IC709
SBC 1 5 XC6120N402N1
NC VCC
SBC 1 4
R850
R852
2
560k
330k
3.3CC
1000p
12 NC VIN
C841
C828
C838
SUB
0.1u
5CC
4
3
1u
R869
R854
100k
100k
3 4
Q712 9T CONTROL SWITCH GND VoUT
VIN
VoUT
9
2 3
VSS VoUT
IC706
3.3C XC6221B332NR
3.3M 3.3C CONTROL SWITCH
VSS
VOLTAGE
CE
3.3M
1000p
REGULATOR (3.3V)
C856
C854
0.1u
1
2
SB
9C
5C
1000p
0.33u
C870
C868
R853
5M 5M
0
INT
RST
3 3
13 13
TXAFI
RXAFI
TXAFO
RXAFO
EMGMIC
DETO
DATAI
ALTI
CN703
CN740
CN741
CN742
CN743
CN744
CN745
CN746
CN747
CN731
FNC1
FNC3
FNC6
FNC8
FNC5
FNC2
FNC4
FNC7
5M
CN739
D700
DA221 CN702
FNC4 20
CN738
D701 RXAFI 19
3 13 DA221 RXAFO 18
CN737 TXAFI 17
D703
DA221 BEEPOUT(L) 16
BEEPOUT(H) 15
CN736
FOR OP BOARD TEST PAD
D700,701,703, D705 DISC 14

13 705,707-710 DA221 SIGOUT(H) 13
8 SURGE
CN735 TXAFO 12
PROTECTION D707
OP BOARD
9 DA221 5C VCC 11
SIGOUT(L) 10
13
CN734 FNC1 9
D708
3 DA221 RESET 8
FNC8 7
CN733 FNC7 6
D709
DA221 R703 FNC2 5
9
0 FNC6 4
CN732
D710 R701 FNC5 3
DA221
0 R940 9C 2
C732 470p
C731 470p
C729 470p
C727 470p
C725 470p
C723 470p
C721 470p
C719 470p
C717 470p
C715 470p
C713 470p
C711 470p
C709 470p
C707 470p
C705 470p
C703 470p
C702 470p
C701 470p
0 GND 1
R932
RS232C RxD
C700
470p
0
CN748
8 R930
22k
MA2S111-F
Q728 RS-232C
2SC4116(Y)F
R931
D718
DETO
DATAI
5C
9C
RXD CONTROL
10k
D718
12 VOLTAGE PROTECTION
5M
SB
9C
5C
5M
5C
SB
12 12 12
IGN IGN
13 13 13
MIC MIC
8 8 8
ME ME
46
X57-768 5/6
Z AA AB AC AD

1
DISPLAY UNIT (X54-3670-20)
D1-5 KEY BACKLIGHT 4.06V 13.53V
J1 Q3,4
8 CM R10
CM KEY BACKLIGHT
7 HOOK CONTROL SWITCH
HOOK D1 D2 1k
6 MIC B30-2282-05 B30-2282-05 4.08V Q3
MIC
KRA225S
R37 R11 SB
5 ME 10
ME D3 D4 1k
4 PTT B30-2282-05 B30-2282-05
PTT
3 GND R12
2 SB 14 D5 1.90V 1.2k
B30-2282-05
1 MBL R1
X57-7680-XX R933 R934
-20 TK-7302 M 0 NO 100
0.01u
D20
R2
10
C1
-21 TK-7302H M 0 NO
b1
g1
a1
b2
DA221 Q4
f1
a2
f2
-11 TK-7302(V) K 0 NO KRC102S-P
-12 TK-7302H K NO 0 INT SP
-16 TK-7302H(V) K 0 NO VOLTAGE
2
dig1
dig2
C44 R38
PROTECTION
470p 10
b1
b2
g1
a1
a2
1000p
f1
f2
100p
C41
C40
5C
HDSP-521A
CN724 CN1
D37
SB 1 SB 30 SB
2 SB 29
1000p
C45 R39
C887
470p 15
1000p
3 SP+ 28
0.01u
100p
C10
LED
C8
C9
SP+
dp1
d1
c1
e1
dp2
d2
c2
g2
e2
4 SP+ 27 DISPLAY
5 SP- 26
12 SP-
dp2
6 SP- 25
470p
C43
14 Q5 R36
R981 0 7 LEDM 24 2SC3928A 8.2k
C889 1000p LEDM R34
12 R982 0 8 MBL 23
R35
22k
1k
1000p
C704 1000p MBL
C34
1000p
R983 0 9 RLED 22
C36
24
23
22
21
20
19
18
17
16
15
14
13
C706 1000p RLED RLED
MLED
R984 0 GLED LED DIMMER
10 21 4.94V
oUT11
oUT10
oUT13
oUT9
oUT8
oUT15
oUT12
oE
oUT14
VDD
SoUT
REXT
CONTROL
TCA62746AFNAG
C708 1000p GLED GLED
R985 0 SWITCH
11 BLED 20
BLED BLED 15 IC1
IC1
R986 0 12 KMO1 19 R6 1k LED 3
KMO1 KMO1 DRIVER
R987 0 13 KMO2 18 R7 1k
oUT0
oUT1
oUT2
oUT3
oUT4
oUT5
oUT6
oUT7
SLAT
GND
KMO2 KMO2
SCK
SIN
R988 0 14 KMO3 17 R8 1k
KMO3 KMO3
11
1
10
3
8
9
5
12
2
7
4
R989 0 KMI1 R3 1k
C46 R40
15 16
470p 10
KMI1 KMI1
0.01u
C16
R990 0 16 KMI2 15 R4 1k
KMI2 KMI2
CN2
R991 0 17 KMI3 14 R5 1k
dp2
b1
g1
a1
b2
f1
a2
KMI3 KMI3
f2
5C R992 0 18 5C 13 L1
1000p
1000p
R993 0
1000p
19 LEDI 12
C898
C30
C29
LEDI LEDI 16 CP1 1k
R994 0 20 LECE 11 15
LECE LECE LELH
R995 0 21 LECL 10 LEDI
LECL LECL
R996 0 LELH LECL
22 9
LELH LELH LECE
R997 0 23 LERE 8
LERE
D702,704,706 24 GND 7
1000p
1000p
1000p
1000p
C31
C33
C35
C32
SURGE 14
C950
4
100p
100p
C42
PROTECTION 8
R856 25 MIC 6
MIC
0 26 ME 5
ME
D704 HOOK R857 1k 27 HOOK/RXD 4
HOOK 16
DA221 /RXD
R855 PTT/TXD
KMI1
28 3
KMI3
KMI2
PTT PTT
02DZ6 2F-Y
/TXD 100
100p
C38
D706
100p
C39
D33
DA221 R858
3.3k 29 MKEY 2 KMO1
MKEY CM
12 R998 30 POWER 1 15
POWER 16
0
100p
1000p
C27
SURGE
C915
B A S
5M D702 PROTECTION
DA221 KMO2
8 J700 Q1,2,7,8
6 CH
FNC 1 TX/BUSY C
MLED
GLED
BLED
RLED
1 INDICATION UP
SB
11 D22 LED SWITCH KMO3
FNC 6 5
INDICATION
*R934
B30-2321-05
*R933 7 Q7 Q8 VOL VOL CH

FNC 2 RT1P141U RT1P141U DN UP DN
R26
R27
2
D22
0
EXTERNAL D-SUB
12 Q1 Q2
5C RT1N441U RT1N441U
8
FNC 3
3 4.93V T : 4.65V
SP2 BUSY :
HR1 13
4.54V
R23
120
9
2.2k
R41
FNC 4
2.2k
R21
4 R42
R28 10k
R22
T : 1.87V
82
DETO 1k BUSY :
HR2 14 2.32V
1000p
C47
10 Q9
FNC 5 2.79V
5 2SC3928A
DATAI Q6 D23
15 2SC3928A B30-2151-05
R29
10k
TX/BUSY
INDICATION
HORN ALERT SWITCH
C886 Q9 Q6
1000p LED DIMMER INDICATION 6
CONTROL SWITCH LED SWITCH
Q724
2SJ645
R888
12
47k
1000p
C885
R889
13
220
12 HORN ALERT
IGN CONTROL
SWITCH
13 Q725
MIC KTC4075E(Y,GR)
R890
8 HORN
ME
1K Note : The components marked with 7
a dot (•) are parts of layer 1.
47
X57-768 6/6, X54-367 1/1
TK-7302/7302(V)/7302H/7302H(V)
BLOCK DIAGRAM
6
FNC1
1 11
SB FNC6
7
FNC2
2 12
IGN 5C
8
FNC3
3 13
PA HR1
9
FNC4
4 14
DETO HR2
10
FNC5
5 15
DATAI GND
1 3 5 7 9 11 13 15 17 19
GND FNC5 FNC2 FNC8 FNC1 5C DATAI NC TXAFI RXAF
2 4 6 8 10 12 14 16 18
8C FNC6 FNC7 FNC3 NC TXAFO DETO ALTI RXAFO
48

TK-7302/7302(V)/7302H/7302H(V)
BLOCK DIAGRAM
IC301
S-AV33A
(TK-7302/7302(V))
RA60H1317M1A
(TK-7302H/7302H(V))
MCU
17 19
TXAFI RXAFI
6 18 20
TI RXAFO FNC4
49

50
Receiver Section
Center Frequency 38.85MHz 450kHz AF Frequency (1kHz)
W: –119.5dBm W: –91dBm W: –95dBm

N : –120dBm N : –92dBm N : –96.5dBm 0.18Vrms 4.2mVrms 0.47mVrms
W: –121dBm W: –121.5dBm W: –106dBm W: –106.5dBm W: –103dBm
N : –121dBm N : –121.5dBm N : –106.5dBm N : –107dBm N : –103dBm 0.256Vrms 12mVrms 0.57Vrms
CF500/
CF501
ANT Baseband Baseband

LNA Mixer MCF IF AMP FM IC
BPF BPF 16 9 IC IC IC705 J701
G1 Q506 D G1 Q504 D XF500 Q502 IC500 16 16 10 1
IC701 17 IC701 26
To make measurements in the RF section, connect the RF level meter. To make measurement in the AF section, connect the AC level meter.
In the RF section, use a 0.01μF coupling capacitor. (ANT input: –53dBm, 1kHz FM, 3kHz Dev (WIDE) / 1.5kHz (NARROW))
TK-7302/7302(V)/7302H/7302H(V)
(The display shows the SSG input value required to obtain 12dB SINAD.) The AF output level is adjusted for a 0.47V/4ohm by the front panel AF VOL control.
Transmitter Section
Display Unit
X54-367 TX-RX Unit TX-RX Unit (VCO) TX-RX Unit Power Module TX-RX Unit
LEVEL DIAGRAM
25W
(TK-7302/
W/N 7302(V))
61.2mVrms 50W
(TK-7302H/
W/N W: 153.6mVrms 7302H(V))
61.2mVrms N : 76.9mVrms –12dBm 5.4dBm 6.2dBm 3dBm 23dBm 17dBm
MIC D302
D719 D303
ANT
IC700 IC701 IC701 Q6 Q9 Q10 Q300 IC301
2 1 21 20 21 24 1 4
To make measurements in the AF section, connect the AC level meter. To make measurements in the RF section, connect the RF Wattmeter (50ohm).
AG is set so that MIC input becomes 3kHz/1.5kHz (Wide/Narrow) DEV at 1kHz MOD.
TK-7302/7302(V)/7302H/7302H(V)
OPTIONAL ACCESSORIES
KCT-60 (Connection Cable)
■ External View
51

TK-7302/7302(V)/7302H/7302H(V)
SPECIFICATIONS
GENERAL
Frequency Range.............................................................. 136 to 174MHz
Number of Channels......................................................... 16
Zones ................................................................................ 2
Channel Spacing ............................................................... Wide: 25kHz Narrow: 12.5kHz
Operating Voltage ............................................................. 13.6V DC ±15%
Operating Temperature Range ......................................... –30°C to +60°C (–22°F to +140°F)
Frequency Stability ........................................................... ±2.5ppm
Antenna Impedance ......................................................... 50Ω
Dimensions (W x H x D) (Projections not included) .......... 160 (6.30) W x 43 (1.69) H x 137 (5.39) D mm (inches)
Weight .............................................................................. 1.18kg (2.6 lbs)
RECEIVER (Measurements made per EIA standard EIA/TIA-603)

Sensitivity (12dB SINAD) .................................................. Wide: 0.28µV Narrow: 0.35µV
Selectivity ......................................................................... Wide: 75dB Narrow: 65dB
Intermodulation ................................................................ Wide: 70dB Narrow: 60dB
Spurious Response........................................................... 75dB
Audio Output (4Ω impedance) .......................................... 4W with less than 5% distortion
TRANSMITTER (Measurements made per EIA standard EIA/TIA-603)

RF Power Output
TK-7302 ....................................................................... 5~25W
TK-7302H..................................................................... 25~50W
Spurious Response........................................................... 70dB
FM Noise .......................................................................... Wide: 45dB Narrow: 40dB
Audio Distortion ................................................................ Wide: Less than 3% Narrow: Less than 5%
Modulation........................................................................ Wide: 16K0F3E Narrow: 11K0F3E
2967-3, Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
P.O. BOX 22745, 2201 East Dominguez Street, Long Beach, Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands
CA 90801-5745, U.S.A.
Via G. Sirtori, 7/9 20129 Milano, Italy

6070 Kestrel Road, Mississauga, Ontario, Canada L5T 1S8
Bolivia, 239-08020 Barcelona, Spain

Rembrücker Str. 15, 63150 Heusenstamm, Germany
(A.C.N. 001 499 074)

Leuvensesteenweg 248 J, 1800 Vilvoorde, Belgium 16 Giffnock Avenue, Centrecourt Estate, North Ryde, N.S.W. 2113 Australia
L’Etoile Paris Nord 2, 50 Allée des Impressionnistes, Unit 3712-3724, Level 37, Tower one Metroplaza, 223 Hing Fong Road,
Bp 58416 Villepinte, 95944 Roissy Ch De Gaulle Cedex Kwai Fong, N.T., Hong Kong
KENWOOD House, Dwight Road, Watford, Herts., 1 Ang Mo Kio Street 63, Singapore 569110
WD18 9EB United Kingdom

TK 7302

Uploaded by

Copyright:

Available Formats

TK 7302

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TK 7302

Uploaded by

Copyright:

Available Formats

VHF FM TRANSCEIVER

Modular jack Key top Panel assy Badge

Downloaded from www.Manualslib.com manuals search engine

Document Copyrights Disclaimer

Downloaded from www.Manualslib.com manuals search engine

4-2. Antenna 5-2. Radio location

4-4. DC Power and wiring NOTE

Downloaded from www.Manualslib.com manuals search engine

Transceiver programming See page 4.

Clone mode PC test mode PC tuning mode

Downloaded from www.Manualslib.com manuals search engine

2. When the Power is switched on, user mode can be en-

Downloaded from www.Manualslib.com manuals search engine

1-1. Installing the KCT-60 (Connection cable) in the

Downloaded from www.Manualslib.com manuals search engine

2-1. Installing the KCT-18 (Ignition sense cable) in ■ Connection procedure

Note: You must setup using the KPG-124D(K) or KPG-

Note: You must setup using the KPG-124D(K) or KPG-

Downloaded from www.Manualslib.com manuals search engine

2. To remove the panel assembly, first turn the transceiver

5. When removing the TX-RX PCB, first remove the top

3. Disconnect the flat cable from connector of the panel as-

Flat cable TX-RX PCB

Downloaded from www.Manualslib.com manuals search engine

2. Precautions for Reassembly

. 4mm (0.16 inch)

Downloaded from www.Manualslib.com manuals search engine

ANT L513,L512,L511 CF501 (Narrow)

D511, L519 TV X1 Q500

Fig. 2 Receiver System

Downloaded from www.Manualslib.com manuals search engine

IC500 Fig. 5 Squelch circuit

3-2. Power Amplifier Circuit

removes unwanted high-frequency harmonic components,

MIC IC700 D711,Q705 IC701 Q6 Q9 Q10 Q300 IC301

MIC key TCXO RF

Fig. 6 Transmitter system

Downloaded from www.Manualslib.com manuals search engine

4-3. Unlock Circuit 5. Control Circuit

Fig. 9 Unlock circuit

Downloaded from www.Manualslib.com manuals search engine

EEPCK IC702 VOL DN VOL UP CH DN

5-2. Display Circuit Fig. 13 Key matrix circuit

5-3. Key Matrix Circuit 6-2. Decode

Downloaded from www.Manualslib.com manuals search engine

Fig. 16 Power supply circuit

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

• Tolerance (More than 10pF) (Less than 10pF)

Downloaded from www.Manualslib.com manuals search engine

28 3A ✽ K29-9448-01 KEY TOP D20 DA221 DIODE

K : TK-7302(V)K HK : TK-7302HK HVK : TK-7302H(V)K

Downloaded from www.Manualslib.com manuals search engine

C36 CC73GCH1H080B CHIP C 8.0PF B C322 CK73GB1H271K CHIP C 270PF K

C56 CC73HCH1H101J CHIP C 100PF J C351 C93-0559-05 CHIP C 9.0PF D

C63 CC73HCH1H101J CHIP C 100PF J C363 CC73GCH1H050B CHIP C 5.0PF B

C70 CC73HCH1H050B CHIP C 5.0PF B C372 C93-0562-05 CHIP C 15PF J

C76 CC73HCH1H060B CHIP C 6.0PF B C383 C93-0562-05 CHIP C 15PF J