Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    Model E Alarm Check Valve Specification

    Uploaded by

    Najaf Hussain
    The document is an engineering specification for Reliable Automatic Sprinkler Co.'s Model E Alarm Check Valve with E3 trim. The alarm check valve is listed by cULus and FM for use in wet-pipe fire protection systems and can be installed vertically or horizontally. It has a rated working pressure of 175 psi and is factory tested to 350 psi. The valve comes in sizes from 4 to 8 inches with various inlet and outlet options. The trim is galvanized and has options for closed or open drain configurations. The alarm check valve is to be used with a waterflow pressure switch and will open during testing of alarm devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Model E Alarm Check Valve Specification

    Uploaded by

    Najaf Hussain
    72 views1 page
    The document is an engineering specification for Reliable Automatic Sprinkler Co.'s Model E Alarm Check Valve with E3 trim. The alarm check valve is listed by cULus and FM for use in wet-pipe fire protection systems and can be installed vertically or horizontally. It has a rated working pressure of 175 psi and is factory tested to 350 psi. The valve comes in sizes from 4 to 8 inches with various inlet and outlet options. The trim is galvanized and has options for closed or open drain configurations. The alarm check valve is to be used with a waterflow pressure switch and will open during testing of alarm devices.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is an engineering specification for Reliable Automatic Sprinkler Co.'s Model E Alarm Check Valve with E3 trim. The alarm check valve is listed by cULus and FM for use in wet-pipe fire protection systems and can be installed vertically or horizontally. It has a rated working pressure of 175 psi and is factory tested to 350 psi. The valve comes in sizes from 4 to 8 inches with various inlet and outlet options. The trim is galvanized and has options for closed or open drain configurations. The alarm check valve is to be used with a waterflow pressure switch and will open during testing of alarm devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    72 views1 page

    Model E Alarm Check Valve Specification

    Uploaded by

    Najaf Hussain
    The document is an engineering specification for Reliable Automatic Sprinkler Co.'s Model E Alarm Check Valve with E3 trim. The alarm check valve is listed by cULus and FM for use in wet-pipe fire protection systems and can be installed vertically or horizontally. It has a rated working pressure of 175 psi and is factory tested to 350 psi. The valve comes in sizes from 4 to 8 inches with various inlet and outlet options. The trim is galvanized and has options for closed or open drain configurations. The alarm check valve is to be used with a waterflow pressure switch and will open during testing of alarm devices.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    Reliable Automatic Sprinkler Co., Inc.

    Manufacturers & Distributors of


    Fire Protection Equipment

    Engineering Specification
    Model E Alarm Check Valve with E3 Trim
    Recommended CSI MasterFormat Specification Location: 21 13 13, Wet-Pipe Sprinkler
    Systems (formerly 13930)

    Alarm Check Valve shall be [cULus Listed] [FM Approved] for use in wet-pipe fire protection
    systems for installation in the vertical or horizontal position. The Alarm Check Valve shall be a
    straight flow design, check type valve with grooved seat design. The Alarm Check Valve shall
    have a rated working pressure of 175 psi (12.1 bar) and shall be factory hydrostatic tested at
    350 psi (24.2 bar). Valve size shall be [4” (100mm)] [6” (150mm)] [8” (200mm)] with [US
    Standard flanged inlet and outlet flanges per ANSI B 16.1 (125 lb)] [US Standard flanged inlet
    per ANSI B 16.1 (125 lb) and grooved outlet per ANSI/AWWA C606] [Metric flanged inlet and
    outlet]. Valve construction shall be [for 4” valve: cast iron] [for 6” & 8” valves: ductile iron]
    with bronze seat. The Alarm Check Valve trim shall be galvanized with [constant pressure
    closed drain, including external bypass trim] [variable pressure closed drain, including external
    bypass and retard chamber] [variable pressure open drain, including external bypass and
    retard chamber]. Alarm check valve trim shall include a non-silenceable alarm connection for
    the waterflow pressure switch and shall be configured to cause the clapper to open when
    testing alarm line devices. {Optional: A [cULus Listed] [FM Approved] pressure relief valve
    trim kit shall be provided.} [Optional: A Test & Drain valve trim kit shall be provided.]
    Alarm Check Valve shall be the Reliable Model E with Model E3 trim. Refer to Reliable Bulletin
    417 for associated information.

    103 Fairview Park Drive 1470 Smith Grove Road


    Elmsford, New York 10523 Liberty, South Carolina 29657
    Phone: 914-829-2042 Phone: 864-843-1700
    Toll Free: 800-821-2138 www.reliablesprinkler.com Toll Free: 800-821-2138

    You might also like