Saftlank

2021
SAFETYLINK
CATALOGUE
‘Innovative
Fall Protection’
SafetyLink is a global
leader in designing unique
energy absorbing height
safety systems.
SafetyLink’s team
provide clients with
comprehensive training,
About
data and technical
information delivering
protection to workers in a
multitude of scenarios.
SafetyLink Webinar
Online Training Link
1300 789 545
2
Anchors
HEIGHT SAFETY PERMANENT ROOF ANCHORS
AND HORIZONTAL LIFELINE SYSTEMS
Lifelines
An Australian company established in 1998, SafetyLink is a global leader in design,
manufacture and distribution of quality height safety systems. Recognised for
pioneering the first energy absorbing anchor point, this same technology has been
integrated into the Frog range of products.
All anchor points, lifelines and ladder systems manufactured by SafetyLink are
extensively tested to meet and exceed industry standards. Tests are conducted
Shuttles/Fittings
by accredited facilities in a multitude of scenarios ensuring that our height safety
systems can be relied upon beyond the test laboratory. We test to European
Standards EN795, CEN/TS16415, Australian Standards AS/NZS 1891.4, 5532 and
USA Standards OSHA/ANSI 1926.502, Z359.7.
SafetyLink
X-Rail
Roof Access
Working at heights is something SafetyLink takes seriously, with comprehensive
installation instructions, online training and mobile applications all supported with
an experienced technical team. Our online platform enables easy access to our
learning management system, product information and lifeline system builds all in
the one place.
Tools
Supply a large range of height safety systems that protect workers from the
ground up.
All products tested and manufactured to current Standards.
Access to online training modules 24/7.
PPE
Supply of installation guides and product data sheets.
Assisted system design layout and advice.
Extensive technical support with collectively over 100 years of experience in the
height safety industry.
SRL’s
Visit us at www.safetylink.com for the latest training, height safety resources and fall
protection products.
SafetyLink.com
3
Contents
ANCHORS
6
Concrete Anchors 8
Concrete Anchors - Raised TUFF-POST (150/300) 12
Concrete Anchors - Raised TUFF-POST (600/900) 14
Eyebolts / Eyehooks / Eyenuts 16
Rafter Mounted Anchors - TileLink 18
Rafter Mounted Anchors 20
Purlin Mounted Anchors - RetroLink 22
Steel Anchors - Raised TUFF-POST (150/300) 24
Steel Anchors - Raised TUFF-POST (600/900) 26
Surface Mounted Anchors - FrogLink 28
Surface Mounted Anchors 30
Temporary Anchorssssss 34
LIFELINES 36
Concrete FrogLine - DonutLink 38
Concrete FrogLine - Insert Sleeve 40
Concrete FrogLine - Raised TUFF-POST 42
Purlin Mounted FrogLine - Retro 48
Steel Mounted FrogLine - Raised TUFF-POST 50
Steel Mounted FrogLine 56
Surface Mounted FrogLine (Aluminium Plate) 58
Surface Mounted FrogLine (Stainless Steel Plate) 60
Surface Mounted Brownbuilt FrogLine 62
Membrane Roof Mounted FrogLine 64
1300 789 545
Clamp Mounted FrogLine 66

Surface Mounted Plate Selector 68
4
Anchors
Lifelines

LIFELINES OVERHEAD/WALL
Overhead Concrete FrogLine - DonutLink 70
Overhead Concrete FrogLine - Insert Sleeve 72
Shuttles/Fittings
Overhead Steel FrogLine 74
Overhead Steel FrogLine - TUFF-POST (150/300) 76
Overhead Steel FrogLine - TUFF-POST (600/900) 78
Wall Mounted Concrete FrogLine - DonutLink 80
Wall Mounted Concrete FrogLine - Insert Sleeve 82
Wall Mounted Concrete FrogLine - TUFF-BRACKET 84
Wall Mounted Steel FrogLine 86
X-Rail
SHUTTLES/FITTINGS 88
Lifeline Cable/Terminals 90
Lifeline Shuttles 92
Roof Access
HORIZONTAL RIGID ANCHOR LINE 94
X-Rail 96
ROOF ACCESS
102
Ladder Access Brackets 104
Entry Access Items 106
Tools
TOOLS
108
Riveting Tools 110
Crimping Tools 112
Hydrajaws Pull Testers 114
PPE
PERSONAL PROTECTIVE EQUIPMENT 116

Roof Workers Kits 118
SRL’s
SELF RETRACTING LIFELINES 120

Self Retracting Lifelines 122
APPENDIX
SafetyLink.com
Concrete Adhesive - Data Sheet 126

Concrete Pull Testing - Data Sheet 128
Cable - Data Sheet 129
Warnings / Maintenance - Periodic Inspections 132
5
‘Innovative
Fall Protection’
ANCHOR POINT
SafetyLink’s dedicated design team have been
Energy Absorbing Anchors working continuously creating a multitude of new

anchors to suit any working at heights scenario.
SafetyLink supply height safety equipment to all
keeping you safe whilst industries including industrial, commercial and
domestic sites.
working at heights From a series of anchor points to a complete network

of systems for maintenance, access and inspections,
SafetyLink has you covered.
All SafetyLink products undergo extensive testing in
a multitude of scenarios by accredited testing facilities.
SafetyLink’s experienced technical team is
complemented with comprehensive installation
manuals and testing certificates.
Roof Anchor Layout Video

1300 789 545
6
Anchors
Lifelines
Shuttles/Fittings
Anchors
X-Rail
Roof Access
SafetyLink will provide you with the following:
Supply a large range of anchor points that protect workers
from the ground up.
Tools
Assisted system design, layout and advice. PPE
Extensive technical support with collectively over 100 years

of experience in the height safety industry.
SRL’s
Benefits of choosing SafetyLink:

SafetyLink’s roof anchor point designs incorporate the same
stand out feature of all our roof anchors by maximising energy
absorption. This dynamic design reduces the load back onto the
structure and the worker attached to the roof anchor.
A fall is never an anticipated event when working at heights,
SafetyLink.com
therefore the direction of your fall cannot be accurately predicted.

All SafetyLink roof anchors are designed and tested as multi-
directional.
7
CONCRETE MOUNTED ANCHORS
SafetyLink’s concrete mounted anchors are an

extremely versatile anchor with a number of
different eyebolt/insert combinations. The eyebolt
range is designed for fall arrest and rope access.
The Standard Eyebolt is designed for fall arrest

only, it’s long tapered stem is designed to absorb
ANCHORS energy while arresting a fall therefore reducing the
SafetyLink provides a comprehensive online platform that enables load off the structure and the person in the event
you to participate in installation training, access product information of a fall.
and compile your certificate information in the one place.
The Abseil Eyebolt is a fall arrest rope access
The structure must be assessed by an engineer, unless it is clear to anchor designed to withstand a live load without
a competent person that the structure is adequate. activating the bending motion that occurs when
arresting a fall.
Where a low profile design is more desirable a

Collared Eyebolt can be used to achieve this.
To comply with current Standards each concrete

anchor must be tested after installation, see
Installation Chemical Adhesive Installation
Appendix 2.
Video Data Sheet Manual
CONCRETE MOUNTED ANCHORS
Product Code Description Weight (kg)

CONCL001(ABSEIL) ConcreteLink Anchor with Abseil Eyebolt 0.453
CONCL001(STANDARD) ConcreteLink Anchor with Standard Eyebolt 0.496
CONCL002 ConcreteLink Anchor with Collared Eyebolt 0.478
CONCL005 ConcreteLink One Piece Anchor 0.332
CONCL006 Concrete Brass Bolt 0.037
RECOMMENDED TOOLS FOR INSTALLATION
Product Code Description Page

CON-CHEM-FISV.300 Fischer FIS-V Injection Mortar FIS V Cartridge 300ml with 2 x Static Mixers 126
1300 789 545
TESTER-200-014 M2000 Scaffold Tie Tester Kit with 0-25kN Analogue Gauge (Digital Gauge available) 114
8
Anchors
Lifelines
ConcreteLink Anchor with Abseil Eyebolt FALL ARREST & ABSEIL
ConcreteLink can be ordered with Standard or Abseil Eyebolt. The Standard

Eyebolt is designed for fall arrest only. The Abseil Eyebolt is designed to withstand
a live load without activating the bending motion that occurs when arresting a fall.
Shuttles/Fittings
360° Multi-directional, enabling full rotation around the anchor.
Chemically anchored into concrete.
Drill a 28mm hole to a depth of 90mm.
Eyelet 28mm ID.
PRODUCT CODE: CONCL001 (Advise Standard or Abseil Eyebolt)
Components Description Material Qty

NUT M16_316 Nut: M16 316SS 1
CON-INSERT ConcreteLink Insert M16 90mm 316SS 1
Advise if you require Standard or Abseil Eyebolt
EYEBT001 Standard Eyebolt (Bearing Length 178mm) 316SS 1
X-Rail
EYEBT002 Abseil Eyebolt (Bearing Length 130mm) 316SS 1
ConcreteLink Anchor with Collared Eyebolt FALL ARREST & ABSEIL

ConcreteLink Collared Eyebolt is a low profile anchor point designed for use in
Roof Access
concrete, where the eyebolt can be removed if required.
Eyelet 35mm ID.
PRODUCT CODE: CONCL002

EYEBOLT M16x26mm Collared Eyebolt M16 26mm 316SS 1
Tools
ConcreteLink One Piece Unit FALL ARREST & ABSEIL
ConcreteLink One Piece Unit is a low profile anchor point designed for use in
concrete, where the eyebolt will remain in place exposed for attachment. PPE
Eyelet 35mm ID.
SRL’s

CONCL005 One Piece Concrete Anchor 316SS 1
Concrete Brass Bolt

SafetyLink.com
Brass Bolt to be used with concrete insert when eyebolt not in use.
Keeps internal section of insert free from debris.

CONCL006 Concrete Brass Bolt Brass 1
9
CONCRETE WALL/FLOOR MOUNTED ANCHORS
SafetyLink’s patented WindowLink anchor

point is designed for use in concrete
structures where the eyebolt will remain
concealed until needed for use.
The WindowLink can be placed outside or

within the building, creating easy access
for window maintenance.
Both the WindowLink and SwiveLink are ANCHORS

non obtrusive and designed to swivel 360
degrees with a built in shock absorber. SafetyLink provides a comprehensive online platform that enables
you to participate in installation training, access product information
Concrete Anchors must be chemically and compile your certificate information in the one place.
fastened, refer to Chemical Adhesive data The structure must be assessed by an engineer, unless it is clear to
sheet in Appendix 1. a competent person that the structure is adequate.
To comply with current Standards each

concrete anchor must be tested after
installation, see Appendix 2.
Chemical Adhesive Installation Manual

Data Sheet
CONCRETE WALL/FLOOR MOUNTED ANCHORS

WINDW001 WindowLink Anchor 0.476
SWIVL002 SwiveLink Anchor 0.495
TUFF-BRKT-C-COL TUFF-BRACKET Wall Mounted Concrete Anchor with Collared Eyebolt 3.664
TUFF-BRKT-C-RET TUFF-BRACKET Wall Mounted Concrete Anchor with Retro Eyebolt 3.170

1300 789 545
10
Anchors
Lifelines
WindowLink FALL ARREST & ABSEIL
WindowLink anchor point designed for use in concrete structures where the
eyebolt will remain concealed until needed for use.
Shuttles/Fittings
Designed to swivel 360 degrees with built in shock absorber.
Discreet stainless steel cover.
Chemically anchored into concrete, 55mm core drill to 20mm depth then drill a
hole 28mm to a depth of 122mm.
Eyelet 28mm ID.
PRODUCT CODE: WINDW001

WINDW001 WindowLink Concrete Anchor 316SS 1
X-Rail
SwiveLink FALL ARREST & ABSEIL
SwiveLink anchor point designed for use in concrete structures with the
convenience of a swiveling eyebolt.
Designed to swivel 360 degrees with built in shock absorber.
Chemically anchored into concrete, drill a 28mm hole to a depth of 90mm.
Roof Access
Eyelet 28mm ID.
PRODUCT CODE: SWIVL002

SWIVL002 SwiveLink Eyebolt Anchor 316SS 1
TUFF-BRACKET Concrete Wall Mounted Anchor FALL ARREST & ABSEIL

Wall mounted bracket with Collared Eyebolt.
Tools
Eyelet 35mm ID.
PRODUCT CODE: TUFF-BRKT-C-COL
EYEBOLT M16x26mm Collared Eyebolt M16 26mm 316SS 1 PPE
WASHER M16_Spring_316 Spring Washer: M16 316SS 1
NUT M16_316 Nut: M16 316SS 1
TUFF-BRKT01 Tuff-Bracket 316SS 1
WASHER M16_DONUT Washer: DonutLink M16 316SS 2
CON-M16x160 Anchor Rod wth M16 Nut & Spring Washer 316SS 2
SRL’s
TUFF-BRACKET Concrete Wall Mounted Anchor FALL ARREST & ABSEIL

Wall mounted bracket with Retro Eyebolt.
Eyelet 28mm ID.
PRODUCT CODE: TUFF-BRKT-C-RET
SafetyLink.com

EYEBOLT RETRO Retro Eyebolt with M16 Flat Washer and O-Ring 316SS 1
RETRO-WASHER Retro Washer with Rubber 316SS 1
NUT M16 Nut: M16 316SS 1
11
CONCRETE TUFF-POST ANCHORS (150/300)
TUFF-POST is designed to raise the height of

a height safety system using 150mm, 300mm,
600mm, or 900mm TUFF-POST’S.
TUFF-POST is a sealed unit made entirely from

ANCHORS stainless steel. Designed to be submerged into
SafetyLink provides a comprehensive online platform that enables garden beds, water and other mediums.
and compile your certificate information in the one place. The Retro Eyebolt is a fall arrest rope access
anchor designed to withstand a live load without
The structure must be assessed by an engineer, unless it is clear to
activating the bending motion that occurs when
a competent person that the structure is adequate.
arresting a fall. Where a low profile design is
more desirable a Collared Eyebolt can be used
to achieve this.
Concrete Anchors must be chemically fastened.

Chemical Adhesive Installation Manual Appendix 1 & 2.
Data Sheet
CONCRETE MOUNTED TUFF-POST ANCHORS

TUFF-POST150R-C-RET TUFF-POST Concrete Anchor Raised 150mm with Retro Eyebolt (Round Post) 3.615
TUFF-POST150R-C-COL TUFF-POST Concrete Anchor Raised 150mm with Collared Eyebolt (Round Post) 3.559

1300 789 545
12
Anchors
Concrete TUFF-POST 150mm with Retro Eyebolt FALL ARREST & ABSEIL
TUFF-POST 150 system is raised 150mm off the concrete.

Lifelines
Retro Eyebolt - Eyelet 28mm ID.
PRODUCT CODE: TUFF-POST150R-C-RET

EYEBOLT-RETRO Retro Eyebolt with M16 Flat Washer and O-Ring 316SS 1
Shuttles/Fittings
TUFF-POST150R TUFF-POST 150mm (Round) 316SS 1
CON-M12x160 Anchor Rod M12X160, M12 Spring Washer, Washer & Nut 316SS 2
Concrete TUFF-POST 150mm with Collared Eyebolt FALL ARREST & ABSEIL
Collared Eyebolt - Eyelet 35mm ID.
X-Rail
PRODUCT CODE: TUFF-POST150R-C-COL
EYEBOLT M16x26mm Collared Eyebolt: M16x26mm 316SS 1
Roof Access

Tools
TUFF-POST300R TUFF-POST 300mm (Round) 316SS 1 PPE
SRL’s


SafetyLink.com

13
CONCRETE TUFF-POST ANCHORS (600/900)

600mm, or 900mm TUFF-POST’S.
TUFF-POST is a sealed unit made entirely from

stainless steel. Designed to be submerged into
ANCHORS garden beds, water and other mediums.
SafetyLink provides a comprehensive online platform that enables
The Retro Eyebolt is a fall arrest rope access
anchor designed to withstand a live load without
activating the bending motion that occurs when
The structure must be assessed by an engineer, unless it is clear to arresting a fall. Where a low profile design is
a competent person that the structure is adequate. more desirable a Collared Eyebolt can be used
to achieve this.
Concrete Anchors must be chemically fastened.

Appendix 1 & 2.
Data Sheet
CONCRETE MOUNTED TUFF-POST ANCHORS


1300 789 545
14
Anchors

Lifelines

Shuttles/Fittings

X-Rail
Roof Access
Concrete TUFF-POST 900mm with Retro Eyebolt FALL ARREST

Tools

TUFF-POST900R TUFF-POST 900mm (Round) 316SS 1 PPE
Concrete TUFF-POST 900mm with Collared Eyebolt FALL ARREST

SRL’s


SafetyLink.com

15
EYEBOLTS / EYEHOOKS / EYENUTS
ANCHORS
SafetyLink provides a comprehensive online platform that enables you to
participate in installation training, access product information and compile your Chemical Adhesive
certificate information in the one place. Data Sheet
The structure must be assessed by an engineer, unless it is clear to a competent
person that the structure is adequate.
EYEBOLTS / EYEHOOKS / EYENUTS
Product Code Description Rated Weight (kg)

EYEHOOK M12 Eyehook: no thread (suits M12 Bolt) 15kN 0.120
EYEHOOK M16 Eyehook: no thread (suits M16 Bolt) 15kN 0.243
EYEBT001 Eyebolt: Standard (Bearing Length 178mm) 15kN 0.302
EYEBT002 Eyebolt: Abseil (Bearing Length 130mm) 15kN 0.249
EYEBOLT M16x26mm Eyebolt: Collared M16 x 26mm 15kN 0.274
EYENUT M16 Eyenut: Collared Female 16ID 15kN 0.183
EYENUT M20 Eyenut: Collared Female 20ID 15kN 0.365
Eyehook FALL ARREST & ABSEIL
Single person anchor.

Rated at 15kN.
Complies with EN795.
Product Code Description Material Qty

EYEHOOK M12 Eyehook: no thread (suits M12 Bolt) 316SS 1
1300 789 545
EYEHOOK M16 Eyehook: no thread (suits M16 Bolt) 316SS 1
16
Anchors
Standard Eyebolt FALL ARREST
The Standard Eyebolt is designed for fall arrest only.
Available to attach to a multitude of different mounting systems.
Energy absorbing, 360° Multi-directional.
Lifelines
Single person anchor, rated at 15kN.
Thread M16.
Eyelet 28mm ID.
PRODUCT CODE: EYEBT001
Shuttles/Fittings
EYEBOLT-STANDARD Standard Eyebolt (Bearing Length 178mm) 316SS 1
NUT LOCKING HEX Locking Hex Nut M16 316SS 1
Abseil Eyebolt FALL ARREST & ABSEIL
The Abseil Eyebolt is designed to withstand a live load without activating the
bending motion that occurs when arresting a fall.
Available to attach to a multitude of different mounting systems (not to be used with
surface mounted anchor).
X-Rail
Energy absorbing, 360° Multi-directional.
Thread M16.
Eyelet 28mm ID.
Roof Access
PRODUCT CODE: EYEBT002

EYEBOLT-ABSEIL Abseil Eyebolt (Bearing Length 130mm) 316SS 1
NUT M16_316 Nut: M16 316SS 1
Collared Eyebolt FALL ARREST & ABSEIL

The Collared Eyebolt is a low profile anchor point.
Tools
360° Multi-directional.
Thread M16.
Eyelet 35mm ID.
PRODUCT CODE: EYEBOLT M16x26mm

PPE
EYEBOLT M16x26mm Collared Eyebolt M16 x 26mm 316SS 1
SRL’s
Eyenut M16 & Eyenut M20 FALL ARREST & ABSEIL

Available to attach to a multitude of different mounting systems.
Eyenut M16 - Eyelet Internal Diameter 35mm.
Eyenut M20 - Eyelet Internal Diameter 40mm.
SafetyLink.com
PRODUCT CODE: EYENUT M16 & EYENUT M16

EYENUT M16 Eyenut: Collared Female Thread M16 316SS 1
EYENUT M20 Eyenut: Collared Female Thread M20 316SS 1
17
TILELINK - RAFTER MOUNTED ANCHORS
SafetyLink’s team designed the TileLink roof anchor

(winner of an episode on ABC1 The New Inventors)
with unique energy absorbing capabilities, to
reduce the risk of injury to the person and damage ANCHORS
to the structure. SafetyLink provides a comprehensive online platform that
enables you to participate in installation training, access
The TileLink is quick to install, with amazing product information and compile your certificate information
performance ability. in the one place.
The structure must be assessed by an engineer, unless it is
Low profile reflective design is a plus for any clear to a competent person that the structure is adequate.
commercial or residential enterprise wanting to
maintain an aesthetically pleasing façade.
The TileLink fits between the existing tiles ensuring

no waterproofing issues. There is no need to cut
the sarking as the design of this unique roof anchor
eliminates any future potential roof leaks.
Highly flexible design ensures installation to the Installation Video Installation Manual
majority of roof tile profiles.
TILELINK - RAFTER MOUNTED ANCHORS

TILEL001 TileLink Timber Rafter Mounted Anchor 0.634
TILEL001+SCREWS TileLink Timber Rafter Mounted Anchor + 5 Screws 0.679
TILEL001_SFM TileLink Steel Frame Mounted Anchor 0.630
1300 789 545
TILEL001+RIVETS TileLink Steel Frame Mounted Anchor + 5 Aluminium Rivets 0.665
18
Anchors
Lifelines
TileLink Anchor (Timber Rafters) FALL ARREST
TileLink anchor point designed for use on timber rafters with tiled roof.
Shuttles/Fittings
Five fixing points with five (5) alternate fixing rows to suit multitude of tile roof
profiles.
Install using 5 x 12 gauge (50mm) roofing screws.
Eyelet 30mm ID.
PRODUCT CODE: TILEL001+SCREWS

TILEL001 TileLink Anchor for Timber Rafters 316SS 1
SCREW 12x50mm 12 Gauge x 50mm Hex Head Screw Galvanized 5
X-Rail
TileLink SFM Anchor (Steel Rafters) FALL ARREST
TileLink anchor point designed for use on steel rafters with tiled roof.
Roof Access
Five fixing points with three (3) alternate fixing rows to suit multitude of tile roof
profiles.
Install using 5 x 8mm Rivets (Drill Size 7.8-8.2mm Aluminium).
Eyelet 30mm ID.
PRODUCT CODE: TILEL001+RIVETS
Tools
TILEL001_SFM TileLink Anchor for Steel Rafters 316SS 1
RIVET_8mm(27.7) Tri-fold Rivets 7.7 x 27.7 length (Green seal) Aluminium 5
PPE
SRL’s
Timber Frame Structure Metal Frame Structure

SafetyLink.com

GESIPA001.01 Gesipa Powerbird BT Cordless Rivet Tool (includes extra battery) 111
GESIPA004 Gesipa PowerPack PRO Cordless Rivet Tool (includes extra battery) 111
GESIPA001.02 Gesipa Hand Rivet Tool (HN 2) 111
HANDTOOL001 SafetyLink Hand Rivet Tool 110
19
RAFTER MOUNTED ANCHORS
The RafterLink and HingeLink units include

SafetyLink’s patented Eyebolts. The length
of the eyebolt enables it to protrude above
ANCHORS the roof structure when installing into timber
SafetyLink provides a comprehensive online platform that structures.
product information and compile your certificate information Standard Eyebolt is designed for fall arrest,
in the one place. it’s long tapered stem is designed to absorb
The structure must be assessed by an engineer, unless it is energy while arresting a fall therefore
clear to a competent person that the structure is adequate. reducing the load off the structure and the
person attached to the anchor.
Abseil Eyebolt can be adapted to the

RafterLink forming an anchor from where
you can abseil, creating a safe work station
for hard to access maintenance on buildings.
Installation Manual Anchor Layout
RAFTERLINKS - RAFTER MOUNTED ANCHORS

RAFTR001 RafterLink Anchor with Standard Eyebolt 1.446
RAFTR001+ABSEIL RafterLink Anchor with Abseil Eyebolt 1.423
RAFTR004 Side Mounted RafterLink Anchor with Standard Eyebolt 1.682
RAFTR004+ABSEIL Side Mounted RafterLink Anchor with Abseil Eyebolt 1.659
HINGE001 HingeLink Anchor with Standard Eyebolt 1.301
HINGE001+ABSEIL HingeLink Anchor with Abseil Eyebolt 1.258
1300 789 545
20
Anchors
Lifelines
RafterLink Anchor FALL ARREST & ABSEIL
RafterLink anchor point is designed for use on timber structures where there is
easy access to the top of the rafter.
Shuttles/Fittings
Fixing to hardwood F14 or greater use 8 type 17 Hex Head 14g x 75mm screws.
Fixing to softwood less than F14, use 8 type 17 Hex Head 14g x 90mm screws.
360° Multi-directional, will arrest a fall from any direction.
Eyelet 28mm ID.
PRODUCT CODE: RAFTR001 (Advise Standard or Abseil Eyebolt)

WASHER 75mm Square 75mm Rubber Hat Washer Rubber 1
RAFTER-BASE RafterLink Base 0 Degree Pitch 316SS 1
X-Rail
Side Mounted RafterLink Anchor FALL ARREST & ABSEIL
Roof Access
RafterLink Side Mounted anchor point is designed for use on timber structures
where there is easy access to the rafter, installs onto the side of the rafter.
Fixings required: eight (8) type 17 Hex Head 14g x 50mm screws.
Eyelet 28mm ID.
PRODUCT CODE: RAFTR004 (Advise Standard or Abseil Eyebolt)
Tools
RAFTER-BASE-SIDE RafterLink Side Mounted Base 316SS 1
PPE
HingeLink Anchor FALL ARREST & ABSEIL

HingeLink anchor point is designed for use on metal/tiled/timber structures where
there is easy access to the underside of the roof, the base of the unit is hinged
SRL’s
enabling a flexible means of attachment.

Fixings required: four (4) M12 bolts and 2 Hex Head 12g x 50mm screws.
Eyelet 28mm ID.
PRODUCT CODE: HINGE001 (Advise Standard or Abseil Eyebolt)

SafetyLink.com

HINGE-BASE-SS HingeLink Base 316SS 1
21
RETROLINK - STEEL PURLIN ANCHORS
The RetroLink anchor points are designed for use

on metal roofing with steel purlin structure.
ANCHORS
Installation is a simple task requiring no access
SafetyLink provides a comprehensive online platform that
from underside of the roof, requiring only one
product information and compile your certificate information 25mm hole to be drilled into the roof sheeting and
in the one place. through the purlin.
The structure must be assessed by an engineer, unless it is Waterproofing washer combined with an o ring
clear to a competent person that the structure is adequate. seals the hole, eliminating any waterproofing
issues. Apply sealant between washer and roof
sheeting ensuring entire section filled to prevent
water penetration.
Easy installation into concealed areas.
RetroLink installed onto the raised section of roof

sheet profiles are NOT suitable for abseiling due to
Installation Video Installation Manual potential roof sheet distortion under live loading.
RETROLINKS - STEEL PURLIN MOUNTED ANCHORS

RETRO003 RetroLink Anchor with Flat Washer 0.447
RETRO004 RetroLink Anchor with Raised Washer (Cannot be used for Abseiling) 0.447
SWIVL001 SwiveLink Anchor with Nut 0.568
1300 789 545
22
Anchors
Lifelines
RetroLink Anchor with Flat Washer FALL ARREST & ABSEIL
Shuttles/Fittings
RetroLink anchor can be installed onto a steel C or Z purlin, where no access
is available from underneath the roof. Steel purlins must be a minimum 1.2mm
gauge.
Abseiling and Fall Arrest anchor with an unobtrusive design that requires no
special tooling and minimal penetration to the roof sheeting.
Drill a 25mm hole.
Eyelet 28mm ID.
PRODUCT CODE: RETRO003
X-Rail
EYEBOLT-RETRO Retro Eyebolt 316SS 1
RETRO-WASHER Retro Washer with Foam 316SS 1
RETRO-TUBE Retro Tube with Positioning Ties 316SS 1
Roof Access
RetroLink Anchor with Raised Washer FALL ARREST
RetroLink anchor with raised washer can be installed onto a steel C or Z purlin,
where no access is available from underneath the roof. Steel purlins must be a
minimum 1.2mm gauge.
SafetyLink RetroLink anchors installed to the raised section of roof sheet profiles
are NOT suitable for Rope Access/Abseiling due to potential roof sheet
distortion under live loading.
Tools
Drill a 25mm hole.
Eyelet 28mm ID.
PRODUCT CODE: RETRO004

PPE
EYEBOLT-RETRO Retro Eyebolt 316SS 1
RETRO-WASHER-RAISED Retro Raised Washer with Foam 316SS 1
RETRO-TUBE Retro Tube with Positioning Ties 316SS 1
SRL’s
SwiveLink with Nut FALL ARREST & ABSEIL
SwiveLink anchor point is used in steel column structures.

Designed to swivel 360 degrees.
Built in shock absorber with the convenience of a swiveling eyebolt.
Drill a 28mm hole.
SafetyLink.com
Eyelet 28mm ID.
PRODUCT CODE: SWIVL001

SWIVELINK SwiveLink: Swiveling Unit 83mm 316SS 1
SWIVELINK NUT SwiveLink Nut 316SS 1
23
STEEL TUFF-POST ANCHORS (150/300)

600mm or 900mm TUFF-POSTS.
ANCHORS
SafetyLink provides a comprehensive online platform that TUFF-POST is a sealed unit made entirely from
enables you to participate in installation training, access stainless steel. Designed to be submerged into
product information and compile your certificate information garden beds, water and other mediums.
in the one place.
The structure must be assessed by an engineer, unless it is The Retro Eyebolt is a fall arrest rope access
clear to a competent person that the structure is adequate. anchor designed to withstand a live load
without activating the bending motion that
occurs when arresting a fall. Where a low
profile design is more desirable a Collared
Eyebolt can be used to achieve this.

TUFF-POST150R-S-RET TUFF-POST Steel Anchor Raised 150mm with Retro Eyebolt 3.977
TUFF-POST150R-S-COL TUFF-POST Steel Anchor Raised 150mm with Collared Eyebolt 3.927
1300 789 545
24
Anchors
Steel Mounted TUFF-POST 150mm with Retro Eyebolt FALL ARREST & ABSEIL
TUFF-POST 150 system is raised 150mm off the steel structure.
PRODUCT CODE: TUFF-POST150R-S-RET
Lifelines
BOLT-M12x50mm-SS Bolt: M12x50mm Set Screw (Length to be confirmed) 316SS 2
WASHER M12_316 Washer: M12 316SS 2
Shuttles/Fittings
NUT M12_316 Nut: M12 316SS 2
Steel Mounted TUFF-POST 150mm with Collared Eyebolt FALL ARREST & ABSEIL
TUFF-POST 150 system is raised 150mm off the steel structure.
PRODUCT CODE: TUFF-POST150R-S-COL
X-Rail
WASHER M16_SPRING_316 Spring Washer: M16 316SS 1
Roof Access
NUT M12_316 Nut: M12 316SS 2
TUFF-POST 300 system is raised 300mm off the steel structure.

Tools

WASHER M16_316 Washer: M16 316SS 4 PPE
NUT M16_316 Nut: M16 316SS 4
SRL’s


SafetyLink.com

NUT M16_316 Nut: M16 316SS 4
25
STEEL TUFF-POST ANCHORS (600/900)

600mm or 900mm TUFF-POSTS.
ANCHORS
SafetyLink provides a comprehensive online platform that TUFF-POST is a sealed unit made entirely from
enables you to participate in installation training, access stainless steel. Designed to be submerged into
product information and compile your certificate information garden beds, water and other mediums.
in the one place.
The structure must be assessed by an engineer, unless it is The Retro Eyebolt is a fall arrest rope access
clear to a competent person that the structure is adequate. anchor designed to withstand a live load
without activating the bending motion that
occurs when arresting a fall. Where a low profile
design is more desirable a Collared Eyebolt can
be used to achieve this.

1300 789 545
26
Anchors

Lifelines
Shuttles/Fittings
NUT M16_316 Nut: M16 316SS 4
X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 4
Steel Mounted TUFF-POST 900mm with Retro Eyebolt FALL ARREST

Tools

WASHER M16_316 Washer: M16 316SS 4 PPE
NUT M16_316 Nut: M16 316SS 4
Steel Mounted TUFF-POST 900mm with Collared Eyebolt FALL ARREST

SRL’s


SafetyLink.com

NUT M16_316 Nut: M16 316SS 4
27
FROGLINK - SURFACE MOUNTED ANCHORS
This revolutionary all in one unit has been

designed to attach to all metal roof profiles
with a single row of attachment holes. This
unique configuration makes it a fast simple
unit for installation.
The FrogLink's low profile reflective design

is a plus for many commercial or residential ANCHORS
enterprises wanting to maintain an SafetyLink provides a comprehensive online platform that enables
aesthetically pleasing facade. you to participate in installation training, access product information
Dynamic design reduces the load back onto The structure must be assessed by an engineer, unless it is clear to
the structure and person attached to the a competent person that the structure is adequate.
anchor when arresting a fall.
The FrogLink will arrest from any direction,

multi-directional 360 degrees.
Installation Video Installation Manual
FROGLINK SURFACE MOUNTED ANCHORS

FROGL001 FrogLink Anchor 0.291
FROGL001+RIVETS FrogLink Anchor with 7 Aluminium Rivets 0.340
FROGL001+S5Z FrogLink Unit + S5_Z Clamps 0.725
FROGL001+STROP_swaged FrogLink Anchor, 1.2m Strop swaged, Strop Hook, Tag 0.779
FROGL001+STROP+RIVETS_swaged FrogLink Anchor, 1.2m Strop swaged, Strop Hook, Tag and Rivets 0.828

1300 789 545

28
Anchors
Lifelines
Shuttles/Fittings
FrogLink Anchor with Rivets FALL ARREST
FrogLink is a surface mounted height safety anchor point for use on metal roof
profiles where access to building structure is difficult.
PRODUCT CODE: FROGL001+RIVETS

FROGL001 FrogLink Anchor 316SS 1
X-Rail
FrogLink Anchor with S5_Z Clamps FALL ARREST
Roof Access
FrogLink is a surface mounted height safety anchor point for use on Kingzip
standing seam roof profiles where access to building structure is difficult.
Install using 2 x S5_Z Clamps. This clamp has been designed to attach to Kingzip
standing seam roof profile.
For different standing seam roof profiles, consult with SafetyLink.
Tools
PRODUCT CODE: FROGL001+S5Z
S5_Z_BRACKET S5_Z Clamp Bracket Alum/SS 2
PPE
FrogLink Anchor with First Man up Strop FALL ARREST
FrogLink anchor with swaged Strop, to be used as a first man up system.

SRL’s
Attachment end should be secured with a strop hook when not in use to ensure it
can be accessed from a safe area for next use.
PRODUCT CODE: FROGL001+STROP+RIVETS_swaged

SafetyLink.com

STROP 1.2m_swaged 1.2m Strop 316SS/PVC 1
STROPHOOK Spring Fender Hook 316SS 1
STROPHOOK_TAG Strop Hook Warning Label Plastic 1
29
SURFACELINK - SURFACE MOUNTED ANCHORS
Classic Surface Mounted Roof Anchor is multi

directional, attaching to the top of the profile on
the roof sheeting for superior waterproofing.
SafetyLink Eyebolt is forged from 316 stainless

ANCHORS
steel with powerful energy absorbing qualities.
SafetyLink provides a comprehensive online platform that enables
you to participate in installation training, access product information The SafetyLink Eyebolt was developed and
tested extensively to maximize energy absorption
The structure must be assessed by an engineer, unless it is clear to while retaining its strength when arresting a fall.
a competent person that the structure is adequate.
The Eyebolts tapered design enables it to bend
like a fishing pole to reduce the load back on the
structure and the person attached to the anchor.
Surface Mounted Anchors must not be used for

rope access (abseiling).
SURFACE MOUNTED ANCHORS

ASURF001 Surface Mounted Anchor (Aluminium Plate) 0.903
ASURF001+RIVETS Surface Mounted Anchor (Aluminium Plate) with 10 Aluminium Rivets 0.973
HSURF001 Surface Mounted Anchor (Stainless Steel Plate) 1.453
HSURF001+RIVETS Surface Mounted Anchor (Stainless Steel Plate) with 10 Aluminium Rivets 1.523
HSURFAB001+FIXINGS Surface Mounted Abseil Anchor (Stainless Steel Plate) with Fixings 1.639

1300 789 545
30
Anchors
Lifelines
Classic SurfaceLink Anchor (Aluminium Plate) FALL ARREST
SurfaceLink anchor point designed for use on metal roof sheeting where
access to building structure is difficult.
Adjustable design to suit different roof profiles (blank plate or precut holes).
Shuttles/Fittings
Eyelet 28mm ID.
PRODUCT CODE: ASURF001+RIVETS

EYEBOLT-SURFACELINK SurfaceLink Eyebolt (Bearing Length 130mm) 316SS 1
ADV-PLATE-AL-305-H SurfaceLink Plate (precut holes) *MGA 1
WASHER 70OD-Plastic Washer: 70mm OD Plastic 1
WASHER 70OD-SS Washer: 70mm OD 316SS 1
NUT M16_316 Nut: M16 316SS 1
FOAM-TAPE Adhesive single sided tape Foam 2
X-Rail
RIVET_8mm(27.7) Tri-fold Rivets 7.7 x 27.7 length (Green seal) Alum 10
Classic SurfaceLink Anchor (Stainless Steel Plate) FALL ARREST
Roof Access
Adjustable design to suit different roof profiles.
Eyelet 28mm ID.
PRODUCT CODE: HSURF001+RIVETS

ADV-PLATE-SS-305-H SurfaceLink Plate (precut holes) 316SS 1
Tools
NUT M16_316 Nut: M16 316SS 1
PPE
Classic SurfaceLink Abseiling Anchor (Stainless Steel Plate) FALL ARREST & ABSEIL
Adjustable design to suit different roof profiles.
SRL’s

Eyelet 28mm ID.
Collared eyebolt designed for abseiling.
PRODUCT CODE: HSURFAB001+FIXINGS

ADV-PLATE-SS-305-H SurfaceLink Plate (precut holes) 316SS 1
SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
SCREW 14.10x80mm 14.10x80mm All-Thread Hex Head Screw with seal Steel 2
*MGA = Marine Grade Aluminium
*316SS = 316 Stainless Steel 31
Surface mounted 360° Multi-directional

anchors, will arrest a fall from any direction.
Install using S5 Clamp Brackets, contact

ANCHORS
SafetyLink to find the bracket to suit your
SafetyLink provides a comprehensive online platform that roof sheet profile.
product information and compile your certificate information
The brackets clamp to the roof profile with
in the one place.
no penetration to the roof sheeting for
The structure must be assessed by an engineer, unless it is superior waterproofing.
clear to a competent person that the structure is adequate.
There are different plate sizes, see Plate
Selector for plate to suit your roof profile.
SurfaceLink S5 Bracket Anchor FALL ARREST
A surface mounted height safety anchor point for use on standing seam
roof profiles where access to structure is difficult or roof penetrations are
not permitted.
Eyelet 28mm ID.
PRODUCT CODE: SURFCF001+FIXINGS

ADV-PLATE-AL-SIZE SurfaceLink Plate (Plate Selector) *MGA 1
WASHER 70OD-Plastic Washers: 70mm OD Plastic 1
WASHER 70OD-SS Washers: 70mm OD 316SS 1
NUT M16_316 Nut: M16 316SS 1
S5_?_BRACKET S5 Clamp (ADVISE TYPE) Alum/SS 4

SURFL001 Surface Mounted Anchor (2 Side Plates) 1.921
SURFL001+RIVETS Surface Mounted Anchor (2 Side Plates) with 12 Aluminium Rivets 2.005
SURFL001-BROWNBUILT Surface Mounted Anchor (2 Side Plates Bent for Brownbuilt Roof Profile) with 12 x 34mm Rivets (yellow) 2.026
1300 789 545
SURFCF001+FIXINGS Surface Mounted Anchor for Standing Seam Roof Profiles (ADVISE ROOF PROFILE FOR QUOTE) TBA

*316SS = 316 Stainless Steel
32
Anchors
Lifelines
Shuttles/Fittings
Classic SurfaceLink Anchor (Adjustable Side Plates) FALL ARREST
SurfaceLink anchor point with two adjustable plates, designed for use on metal
roof sheeting where access to building structure is difficult.
X-Rail
Plates can be bent to suit Brownbuilt Roof Sheeting.
Eyelet 28mm ID.
Roof Access
PRODUCT CODE: SURFL001+RIVETS
SURF-SIDEPLATE SurfaceLink Side Plate with foam 316SS 2
NUT M16_316 Nut: M16 316SS 1
Tools
Classic SurfaceLink Anchor (Adjustable Side Plates, BENT) FALL ARREST
SurfaceLink anchor point with two adjustable plates, designed for use on
brownbuilt metal roof sheeting where access to building structure is difficult.
PPE
Eyelet 28mm ID.
PRODUCT CODE: SURFL001-BROWNBUILT

SRL’s
SURF-SIDEPLATE-BB SurfaceLink Side Plate (BENT) with foam 316SS 2

NUT M16_316 Nut: M16 316SS 1
RIVET_8mm(34) Tri-fold Rivets 7.7 x 34.0 length (Yellow seal) Alum 12

SafetyLink.com

33
TEMPLINK 5000 - TEMPORARY ANCHOR
ANCHORS
SafetyLink provides a comprehensive online platform that enables you to participate in installation training, access product
information and compile your certificate information in the one place.
The structure must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate.
TempLink 5000 FALL ARREST

Lightweight compact unit, enabling easy manoeuvering to desired location.
The TempLink can be installed directly on timber rafters or through metal roof sheeting to battens.
Secure with six (6) 14g 75mm roofing screws.
One person anchor.
Easy to secure with adjustable stainless steel mounting tabs.
Handy carry bag with installation instructions. Installation
Manual
Product Code Description Material Qty Weight (kg)

TEMPL005 TempLink 5000 - Temporary Anchor 316SS 1
SafetyLink’s temporary roof anchor the TempLink

5000 has been designed for use where an anchor is
required for a temporary period of time in a location
that does not need to be revisited.
TempLink 5000 is a patented multi-directional fall
device designed to absorb energy when a fall is
arrested.
The TempLink 5000 is an extremely useful item for
any person wishing to do roof maintenance where
there is no permanent safety anchors.
The design incorporates the same stand out features
of all our height safety anchors maximising energy
absorption, reducing the load back onto the structure
1300 789 545
and the person attached to the anchor.
34
Anchors
TEMPLINK 3000 - TEMPORARY ANCHOR
Lifelines
Shuttles/Fittings
ANCHORS
SafetyLink provides a comprehensive online platform that enables you to participate in installation training, access product
information and compile your certificate information in the one place.
X-Rail
The structure must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate.
TempLink 3000 FALL ARREST
Lightweight compact unit, enabling easy manoeuvering to desired location.
Roof Access
The TempLink can be installed directly on timber rafters or through metal roof sheeting to battens.
Secure with six (6) 14g 75mm roofing screws.
One person anchor.
UV coated cable. Protective rubberised sleeve preventing damage to roof materials. Installation
Handy carry bag with installation instructions. Manual
Eyelet 33.8mm ID.
Tools
TEMPL003 TempLink 3000 - Temporary Anchor 316SS 1 1.019
SafetyLink’s temporary roof anchor the TempLink PPE

3000 has been designed for use where an anchor
is required for a temporary period of time in a
location that does not need to be revisited.
TempLink 3000 is a patented multi-directional fall
device designed to absorb energy when a fall is
SRL’s
arrested.
The TempLink 3000 is an extremely useful item for
any person wishing to do roof maintenance where
there is no permanent safety anchors.
The design incorporates the same stand out
features of all our height safety anchors maximising
energy absorption, reducing the load back onto the
SafetyLink.com
structure and the person attached to the anchor.
35
‘Innovative
Fall Protection’
SafetyLink’s horizontal lifeline

systems make traversing
along our lifelines simple and
easy, eliminating the need to
disconnect from the line, our
intermediate and corners are
designed so our innovative
shuttles can glide freely.
LIFELINES
The FrogLine lifeline’s low profile design combines
effortless energy absorbing capabilities into every
end, intermediate and corner anchor, consequently
incorporating the line energy absorbers into the
system. This inventive approach ensures our FrogLine
lifeline systems are always installed with the maximum
energy absorption possible regardless of the
horizontal line length.
CONCRETE DONUTLINK VIDEO
Patented low profile design.

Fast simplified installation.
Advanced shock absorbing serpentine.
Innovative built in fall indicators.
Solid 316 stainless steel components.
Quick connect shuttle.
Smooth continuous transition over intermediates.
FROGLINE IN USE VIDEO
1300 789 545
36
Anchors
Lifelines
Shuttles/Fittings
Lifelines
X-Rail
Roof Access
Supply a large range of anchors points and lifelines that protect workers from the ground up.
Assisted system design, layout and advice.
Extensive technical support with collectively over 100 years of experience in the height safety industry.
Tools
Benefits of choosing SafetyLink:
Innovation and attention to detail is always foremost in our minds when designing new products. The FrogLine lifeline
demonstrates this with its intricate tab features. These tabs provide stability whilst the line is in tension, in addition to
this they act as a fall indicator when removed from their initial position.
PPE
The FrogLine’s curved profile, while smart in its simplicity provides the initial shock absorbing capabilities in the event of
a fall. Further extension is provided in the serpentine shapes which progressively dissipate and absorb the energy whilst
retaining their strength. This duality of function is why the FrogLine design surpasses all its competitors in the field.
SRL’s
SafetyLink.com
37
DONUTLINK CONCRETE MOUNTED FROGLINE
Permanent horizontal height safety lifeline system,

designed to be mounted into concrete structure.
Concrete Rod must be chemically fastened, refer to
Chemical Adhesive data sheet in Appendix 1.
DonutLink washer installed as part of the FrogLine
Concrete Lifeline allows pull testing to be completed DonutLink: M16 316SS Adapter to be used
without the need of additional eyebolt or removing any with Hydrajaws Tester to pull test DonutLink
components from the system. Refer to Appendix 2 for Washer on Concrete FrogLine Lifeline.
pull testing.
Equipped with an engineered energy absorbing region
to minimise loads on users and structures in the event
of a fall.
Continuous connection with 8mm stainless steel
cable, utilising the FrogLine Shuttle System, up to four
users per system, two per span. Chemical Adhesive Installation DonutLink FrogLine
Data Sheet Manual Video
DONUTLINK CONCRETE MOUNTED FROGLINE LIFELINE

STAT.FROGCAR002 FrogLine DonutLink Concrete End Anchor 0.965
STAT.FROGCAR001 FrogLine DonutLink Concrete Intermediate Anchor 0.961
STAT.FROGCAR008 FrogLine DonutLink Concrete Intermediate Extended Anchor 1.096
STAT.FROGCAR003 FrogLine DonutLink Concrete Corner Anchor 1.114
Accessories Required for Complete Lifeline

STAT.TENSR (007/004/005) Tensioner with Tension Indicator (Swaged/Swageless/Crimped) 91
STAT.TERMN (001/002/003) Termination (Swaged/Swageless/Crimped) 91
STAT.SHUTL003 FrogLine Shuttle with Karabiner 93
STAT.CABLE001 Cable: 8mm diameter, 7x7 wire rope, 316 Stainless Steel 90
1300 789 545
CON-CHEM-FISV.300 Fischer FIS-V Injection Mortar FIS V Cartridge 300ml with 2 x Static Mixer (scan QR Code) 126
DONUTLINK-ADP DonutLink: M16 316SS Adapter 114
38
Anchors
Lifelines
DonutLink Concrete Mounted END Anchor
End anchor designed to be mounted into a concrete structure as attachment points for
the cable to start and terminate at.
Drill a 18mm hole to a minimum of 90mm embedment into concrete structure.
Shuttles/Fittings
PRODUCT CODE: STAT.FROGCAR002
FROGLINE END FrogLine Base End 316SS 1
NUT M16_316 Nut: M16 316SS 1
WASHER M16_SPRING_316 Washer: M16 Spring 316SS 1
WASHER M16_DONUT Washer: M16 DonutLink 316SS 1
ROD M16X130MM Anchor Rod: M16x130mm (45 deg cut) 316SS 1
DonutLink Concrete Mounted INTERMEDIATE Anchor
Intermediate anchor designed to limit lifeline span distances.
X-Rail

FROGLINE INT FrogLine Base Intermediate 316SS 1
Roof Access
NUT M16_316 Nut: M16 316SS 1
DonutLink Concrete Mounted EXTENDED INTERMEDIATE Anchor

Intermediate anchor designed to limit lifeline span distances. Longer tube to enable
Tools
bending to suit small degree changes in the line.

FROGLINE INT_EXT FrogLine Base Intermediate Extended 316SS 1 PPE
NUT M16_316 Nut: M16 316SS 1
SRL’s
DonutLink Concrete Mounted CORNER Anchor

Corner anchor designed to redirect cable by up to 90 degrees.

SafetyLink.com

FROGLINE CNR FrogLine Base Corner 316SS 1
NUT M16_316 Nut: M16 316SS 1
39
CONCRETE MOUNTED FROGLINE

designed to be mounted into concrete structure.
Concrete Insert must be chemically fastened, refer to
LIFELINES
FrogLine Bolts installed as part of the FrogLine Concrete
Lifeline allows easy proof load testing to be completed Installation of any SafetyLink Lifeline Systems requires face
to face training for manufacturer’s accreditation.
without the need to remove any components from the
system. Refer to Appendix 2 for pull testing. The structure must be assessed by an engineer, unless it is
to minimise loads on users and structures in the event of
a fall.
Continuous connection with 8mm stainless steel cable,
utilising the FrogLine Shuttle System, up-to four users
per system, two per span.
Data Sheet
CONCRETE MOUNTED FROGLINE LIFELINE

STAT.FROGCON002 FrogLine Concrete End Anchor 1.023
STAT.FROGCON001 FrogLine Concrete Intermediate Anchor 1.019
STAT.FROGCON008 FrogLine Concrete Intermediate Extended Anchor 1.154
STAT.FROGCON003 FrogLine Concrete Corner Anchor 1.172

1300 789 545
40
Anchors
Lifelines
Concrete Mounted END Anchor
Shuttles/Fittings
PRODUCT CODE: STAT.FROGCON002

FROGLINE BOLT FrogLine Eyebolt M16 35mm 316SS 1
Concrete Mounted INTERMEDIATE Anchor
X-Rail
Roof Access
Concrete Mounted EXTENDED INTERMEDIATE Anchor
Tools

PPE
FROGLINE INT_EXT FrogLine Base Intermediate Extended 316SS 1
SRL’s
Concrete Mounted CORNER Anchor

SafetyLink.com

41
CONCRETE TUFF-POST FROGLINE
TUFF-POST is designed to raise the height of a height

LIFELINES safety system using either 150mm, 300mm, 600mm or
Installation of any SafetyLink Lifeline Systems requires 900mm TUFF-POST’S.
face to face training for manufacturer’s accreditation.
TUFF-POST is a sealed unit made entirely from stainless
The structure must be assessed by an engineer, steel. Designed to be submerged into garden beds, water
unless it is clear to a competent person that the and other mediums.
structure is adequate.
Anchor Rod must be chemically fastened, refer to
Refer to Appendix 2 for pull testing.
The TUFF-POST when installed with a lifeline is used
with SafetyLink’s energy absorbing FrogLine Lifeline.
The FrogLine Lifeline has advanced shock absorbing
serpentines designed into each anchor with innovative
built-in fall indicators. Therefore reducing the load on the
structure and the person in the event of a fall.
Data Sheet Continuous connection with 8mm stainless steel cable,
utilising the FrogLine Shuttle System, up-to four users per
system, two per span.
1300 789 545
42
Anchors
Lifelines
Shuttles/Fittings
X-Rail
Roof Access
CONCRETE TUFF-POST FROGLINE LIFELINE
STAT.FROGTUFF002C-150R FrogLine TUFF-POST Concrete End Anchor - 150mm 4.109
STAT.FROGTUFF001C-150R FrogLine TUFF-POST Concrete Intermediate Anchor - 150mm 4.105
STAT.FROGTUFF008C-150R FrogLine TUFF-POST Concrete Intermediate Extended Anchor - 150mm 4.240
STAT.FROGTUFF003C-150R FrogLine TUFF-POST Concrete Corner Anchor - 150mm 4.258
Tools
PPE
FrogLine TUFF-POST Concrete End Anchor - 900mm

SRL’s
STAT.FROGTUFF002C-900R 12.423

SafetyLink.com

43
TUFF-POST Raised 150mm Concrete Mounted END Anchor
End anchor designed to be mounted into a concrete structure as attachment points for the
cable to start and terminate at.
Drill 2x 14mm holes to depth of 120mm, minimum embedment 115mm into concrete.
Chemically anchored, allow 35mm anchor rod above slab finishing.
PRODUCT CODE: STAT.FROGTUFF002C-150R
BOLT-M16x50mm-SS Bolt: M16x50mm Set Screw 316SS 1
CON-M12x160 Anchor Rod M12x160, Spring Washer, Nut, Washer 316SS 2
TUFF-POST Raised 150mm Concrete Mounted INTERMEDIATE Anchor

TUFF-POST Raised 150mm Concrete Mounted EXTENDED INTERMEDIATE Anchor

Intermediate anchor designed to limit lifeline span distances. Longer tube to enable bending
to suit small degree changes in the line.

TUFF-POST Raised 150mm Concrete Mounted CORNER Anchor

1300 789 545

44
Anchors
Lifelines
Shuttles/Fittings

X-Rail
Roof Access

Tools
PPE
SRL’s


SafetyLink.com

45



1300 789 545

46
Anchors
Lifelines
Shuttles/Fittings

X-Rail
Roof Access

Tools
PPE
SRL’s

SafetyLink.com

47
PURLIN MOUNTED RETRO FROGLINE

designed to be mounted onto metal purlins
through various metal roof sheeting profiles.
For extra height install with Extension Piece.
Suits pitches no greater than 25 degrees on a
multitude of roof profiles.
LIFELINES Equipped with an engineered energy absorbing
Installation of any SafetyLink Lifeline Systems requires region to minimise loads on users and structures
face to face training for manufacturer’s accreditation. in the event of a fall.
The structure must be assessed by an engineer, Continuous connection with 8mm stainless steel
unless it is clear to a competent person that the cable, utilising the FrogLine Shuttle System, up to
structure is adequate. Installation
Manual four users per system, two per span.
PURLIN MOUNTED RETRO FROGLINE LIFELINE

STAT.FROGRET002 FrogLine RetroLink End Anchor 0.991
STAT.FROGRET001 FrogLine RetroLink Intermediate Anchor 0.987
STAT.FROGRET008 FrogLine RetroLink Intermediate Extended Anchor 1.122
STAT.FROGRET003 FrogLine RetroLink Corner Anchor 1.140
Extensions are used when extra height is required - lengths available 35mm, 55mm and 90mm
STAT.FROGRET002_EXT FrogLine RetroLink End Anchor with 35mm Extension 1.798
STAT.FROGRET001_EXT FrogLine RetroLink Intermediate Anchor with 35mm Extension 1.794
STAT.FROGRET008_EXT FrogLine RetroLink Intermediate Extended Anchor with 35mm Extension 1.929
STAT.FROGRET003_EXT FrogLine RetroLink Corner Anchor with 35mm Extension 1.947

1300 789 545
48
Anchors
Lifelines
Retro END Anchor
End anchor designed to be mounted into steel purlin with various metal roof profiles as
attachment points for the cable to start and terminate at.
Drill a 25mm hole.
Shuttles/Fittings
PRODUCT CODE: STAT.FROGRET002
BOLT-M16x90mm-SS Bolt: M16 x 90mm Set Screw 316SS 1
O-RING O-Ring Rubber 1
WASHER 70OD-Foam Foam Washer: 70OD Foam 1
RETRO-TUBE Retro Tube with Tie 316SS 1
Retro INTERMEDIATE Anchor

Intermediate anchor designed to be mounted into steel purlin with various metal roof
profiles, to limit lifeline span distances.
X-Rail
Drill a 25mm hole.
Roof Access
Retro EXTENDED INTERMEDIATE Anchor

Intermediate anchor with longer tube to enable bending to suit small degree changes in
the line. Designed to be mounted into steel purlin with various metal roof profiles.
Tools
Drill a 25mm hole.
WASHER M16_SPRING_316 Spring Washer: M16 316SS 1 PPE
SRL’s
Retro CORNER Anchor

Corner anchor designed to be mounted into steel purlin with various metal roof profiles.
The lifeline cable runs through the corner anchor point redirecting it by up to 90
degrees.
Drill a 25mm hole.
SafetyLink.com

49
STEEL TUFF-POST FROGLINE
TUFF-POST is designed to raise the height of a height

safety system using either a 150mm, 300mm, 600mm or
900mm TUFF-POST’S.
TUFF-POST is a sealed unit made entirely from stainless
steel. Designed to be submerged into garden beds, water
and other mediums.
The TUFF-POST when installed with a lifeline is used
LIFELINES
with SafetyLink’s energy absorbing FrogLine Lifeline.
Installation of any SafetyLink Lifeline Systems requires The FrogLine Lifeline has advanced shock absorbing
face to face training for manufacturer’s accreditation. serpentines designed into each anchor with innovative
The structure must be assessed by an engineer, built-in fall indicators. Therefore reducing the load on the
unless it is clear to a competent person that the structure and the person in the event of a fall.
utilising the FrogLine Shuttle System, up to four users per
Installation
Manual
1300 789 545
50
Anchors
Lifelines
Shuttles/Fittings
X-Rail
Roof Access
STEEL TUFF-POST FROGLINE LIFELINE
STAT.FROGTUFF002S-150R FrogLine TUFF-POST Steel End Anchor - 150mm 3.964
STAT.FROGTUFF001S-150R FrogLine TUFF-POST Steel Intermediate Anchor - 150mm 3.960
STAT.FROGTUFF008S-150R FrogLine TUFF-POST Steel Intermediate Extended Anchor - 150mm 4.095
STAT.FROGTUFF003S-150R FrogLine TUFF-POST Steel Corner Anchor - 150mm 4.113
FrogLine TUFF-POST Steel End Anchor - 300mm
Tools
STAT.FROGTUFF002S-300R 7.204

PPE

FrogLine TUFF-POST Steel Intermediate Anchor - 900mm
SRL’s
STAT.FROGTUFF001S-900R 12.000

SafetyLink.com

51
TUFF-POST Raised 150mm Steel Mounted END Anchor
End anchor designed to be mounted onto steel structure as attachment points for the
Drill 2 x M12 holes, must be held down with a minimum of 2 x M12 bolts.
PRODUCT CODE: STAT.FROGTUFF002S-150R
NUT M12_316 Nut: M12 316SS 2
TUFF-POST Raised 150mm Steel Mounted INTERMEDIATE Anchor

Intermediate anchor designed to limit lifeline span distances on steel structures.
NUT M12_316 Nut: M12 316SS 2
TUFF-POST Raised 150mm Steel Mounted EXTENDED INTERMEDIATE Anchor

bending to suit small degree changes in the line on steel structures.

NUT M12_316 Nut: M12 316SS 2
TUFF-POST Raised 150mm Steel Mounted CORNER Anchor

Corner anchor designed to redirect cable by up to 90 degrees on steel structures.

1300 789 545

NUT M12_316 Nut: M12 316SS 2
52
Anchors
Lifelines
Shuttles/Fittings
SWASHER M16_SPRING_316 Spring Washer: M16 316SS 1
NUT M16_316 Nut: M16 316SS 4

X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 4

Tools
PPE
NUT M16_316 Nut: M16 316SS 4
SRL’s

SafetyLink.com

NUT M16_316 Nut: M16 316SS 4
53

NUT M16_316 Nut: M16 316SS 4

NUT M16_316 Nut: M16 316SS 4


NUT M16_316 Nut: M16 316SS 4

1300 789 545

54 NUT M16_316 Nut: M16 316SS 4
Anchors
Lifelines

Shuttles/Fittings
NUT M16_316 Nut: M16 316SS 4

X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 4

Tools

PPE
NUT M16_316 Nut: M16 316SS 4
SRL’s

SafetyLink.com

NUT M16_316 Nut: M16 316SS 4 55
STEEL MOUNTED FROGLINE

designed to be mounted into steel construction.
Install up roof pitches no greater than 15 degrees
and across roof pitches no greater than 25
LIFELINES degrees.
Installation of any SafetyLink Lifeline Systems Equipped with an engineered energy absorbing
requires face to face training for manufacturer’s region to minimise loads on users and structures
accreditation. in the event of a fall.
Installation
unless it is clear to a competent person that the cable, utilising the FrogLine Shuttle System, up to
Manual
structure is adequate. four users per system, two per span.
STEEL MOUNTED FROGLINE LIFELINE

STAT.FROGSTE002 FrogLine Steel End Anchor 0.841
STAT.FROGSTE001 FrogLine Steel Intermediate Anchor 0.837
STAT.FROGSTE008 FrogLine Steel Intermediate Extended Anchor 0.972
STAT.FROGSTE003 FrogLine Steel Corner Anchor 0.990

1300 789 545
56
Anchors
Lifelines
Steel Purlin END Anchor
End anchor designed to be mounted into steel structures as attachment points for the
Drill a 16mm hole.
Shuttles/Fittings
PRODUCT CODE: STAT.FROGSTE002
NUT M16_316 Nut: M16 316SS 1
Steel Purlin INTERMEDIATE Anchor

Intermediate anchor designed to be mounted into steel structures to limit lifeline span
X-Rail
distances.
Drill a 16mm hole.

Roof Access
NUT M16_316 Nut: M16 316SS 1
Steel Purlin EXTENDED INTERMEDIATE Anchor

Tools
distances. Longer tube to enable bending to suit small degree changes in the line.
Drill a 16mm hole.

NUT M16_316 Nut: M16 316SS 1
SRL’s
Steel Purlin CORNER Anchor
Corner anchor designed to be mounted into steel structures. The lifeline cable runs
through the corner anchor point redirecting it by up to 90 degrees.
Drill a 16mm hole.

SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
57
SURFACE MOUNTED FROGLINE

designed to be mounted onto various metal profile
roof sheeting.
Advise SafetyLink of your roof profile to acquire plate
size to suit, see Plate Selector.
Install up roof pitches no greater than 15 degrees
and across roof pitches no greater than 25 degrees. LIFELINES
Fitted where it is difficult to access the underside Installation of any SafetyLink Lifeline Systems
of the roof. Equipped with an engineered energy requires face to face training for manufacturer’s
absorbing region to minimise loads on users and accreditation.
structures in the event of a fall.
The structure must be assessed by an engineer,
Installation
Continuous connection with 8mm stainless steel unless it is clear to a competent person that the
Manual
cable, utilising the FrogLine Shuttle System, up to structure is adequate.
four users per system, two per span.
SURFACE MOUNTED FROGLINE LIFELINE (ALUMINIUM PLATES)

STAT.FROGSAL002 FrogLine Surface Mounted End Anchor (Marine Grade Aluminium Plate) 1.468
STAT.FROGSAL002+Fixings FrogLine Surface Mounted End Anchor (Marine Grade Aluminium Plate) + Fixings 1.568
STAT.FROGSAL001 FrogLine Surface Mounted Intermediate Anchor (Marine Grade Aluminium Plate) 1.464
STAT.FROGSAL001+Fixings FrogLine Surface Mounted Intermediate Anchor (Marine Grade Aluminium Plate) + Fixings 1.564
STAT.FROGSAL008 FrogLine Surface Mounted Intermediate Extended Anchor (Marine Grade Aluminium Plate) 1.599
STAT.FROGSAL008+Fixings FrogLine Surface Mounted Intermediate Extended Anchor (Marine Grade Aluminium Plate) + Fixings 1.699
STAT.FROGSAL003 FrogLine Surface Mounted Corner Anchor (Marine Grade Aluminium Plate) 1.617
STAT.FROGSAL003+Fixings FrogLine Surface Mounted Corner Anchor (Marine Grade Aluminium Plate) + Fixings 1.717

1300 789 545

58
Anchors
Surface Mounted END Anchor (Aluminium Plate)
Lifelines
End anchor designed to be mounted on the surface of a metal roof profile as
PRODUCT CODE: STAT.FROGSAL002+FIXINGS
Shuttles/Fittings
ADV-PLATE-AL-305-H SurfaceLink Plate 305mm (precut holes) *MGA 1
WASHER 70od-Plastic Washer: 70mm OD Plastic 2
WASHER 70od-SS Washer: 70mm OD 316SS 1
NUT M16_316 Nut: M16 316SS 1
FOAM-TAPE 29cm Barrier Foam Tape Foam 2
SCREW 14.10x75mm 14-10x75mm Hex Head Screws Galvanized 2
RIVET_8mm(27.7) Tri-fold Rivet: 8mm (Green Seal) Alum 10
Surface Mounted INTERMEDIATE Anchor (Aluminium Plate)

Intermediate anchor designed to be mounted on the surface of a metal roof profile to
limit lifeline span distances.
X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 1
Surface Mounted INTERMEDIATE EXTENDED Anchor (Aluminium Plate)

Intermediate anchor with longer tube to enable bending to suit small degree changes in
the line.
Tools
PPE
NUT M16_316 Nut: M16 316SS 1
SRL’s
Surface Mounted CORNER Anchor (Aluminium Plate)

Corner anchor designed to be mounted on the surface of a metal roof profile. The
lifeline cable runs through the corner anchor point redirecting it by up to 90 degrees.
SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
59
SURFACE MOUNTED FROGLINE

designed to be mounted onto various metal profile roof
sheeting.
Advise SafetyLink of your roof profile to acquire plate size
to suit, see Plate Selector.
LIFELINES Install up roof pitches no greater than 15 degrees and

across roof pitches no greater than 25 degrees.
Installation of any SafetyLink Lifeline Systems
requires face to face training for manufacturer’s Fitted where it is difficult to access the underside of the
accreditation. roof. Equipped with an engineered energy absorbing
region to minimise loads on users and structures in the
Installation event of a fall.
unless it is clear to a competent person that the
Manual
structure is adequate. Continuous connection with 8mm stainless steel cable,
utilising the FrogLine Shuttle System, up to four users per
SURFACE MOUNTED FROGLINE LIFELINE (STAINLESS STEEL PLATES)

STAT.FROGSUR002 FrogLine Surface Mounted End Anchor (316 Stainless Steel Plate) 1.995
STAT.FROGSUR002+Fixings FrogLine Surface Mounted End Anchor (316 Stainless Steel Plate) + Fixings 2.095
STAT.FROGSUR001 FrogLine Surface Mounted Intermediate Anchor (316 Stainless Steel Plate) 1.991
STAT.FROGSUR001+Fixings FrogLine Surface Mounted Intermediate Anchor (316 Stainless Steel Plate) + Fixings 2.091
STAT.FROGSUR008 FrogLine Surface Mounted Intermediate Extended Anchor (316 Stainless Steel Plate) 2.126
STAT.FROGSUR008+Fixings FrogLine Surface Mounted Intermediate Extended Anchor (316 Stainless Steel Plate) + Fixings 2.226
STAT.FROGSUR003 FrogLine Surface Mounted Corner Anchor (316 Stainless Steel Plate) 2.144
STAT.FROGSUR003+Fixings FrogLine Surface Mounted Corner Anchor (316 Stainless Steel Plate) + Fixings 2.244

1300 789 545


60
Anchors
Surface Mounted END Anchor (Stainless Steel Plate)
Lifelines
PRODUCT CODE: STAT.FROGSUR002+FIXINGS

Shuttles/Fittings
ADV-PLATE-SS-305-H SurfaceLink Plate 305mm (precut holes) 316SS 1
NUT M16_316 Nut: M16 316SS 1
Surface Mounted INTERMEDIATE Anchor (Stainless Steel Plate)

X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 1
Surface Mounted INTERMEDIATE EXTENDED Anchor (Stainless Steel Plate)

Intermediate anchor designed to be mounted on the surface of a metal roof profile as
part of a horizontal lifeline system, to limit lifeline span distances.
Tools
Longer tube to enable bending to suit small degree changes in the line.

PPE
NUT M16_316 Nut: M16 316SS 1
SRL’s
Surface Mounted CORNER Anchor (Stainless Steel Plate)


SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
61
SURFACE MOUNTED BROWNBUILT FROGLINE

designed to be mounted onto Longline/Brownbuilt
metal roof sheeting.
LIFELINES Install up roof pitches no greater than 15 degrees

and across roof pitches no greater than 25 degrees.
requires face to face training for manufacturer’s Fitted where it is difficult to access the underside
accreditation. of the roof. Equipped with an engineered energy
absorbing region to minimise loads on users and
Installation structures in the event of a fall.
Manual
structure is adequate. Continuous connection with 8mm stainless steel
cable, utilising the FrogLine Shuttle System, up to
SURFACE MOUNTED FROGLINE LIFELINE (FOR BROWNBUILT/LONGLINE ROOF PROFILES)

STAT.FROGSBB002+Fixings FrogLine Brownbuilt End Anchor (Bent Side Plates for Longline/Brownbuilt) + Fixings 2.509
STAT.FROGSBB001+Fixings FrogLine Brownbuilt Intermediate Anchor (Bent Side Plates for Longline/Brownbuilt) + Fixings 2.505
STAT.FROGSBB008+Fixings FrogLine Brownbuilt Intermediate Extended Anchor (Bent Side Plates for Longline/Brownbuilt) + Fixings 2.640
STAT.FROGSBB003+Fixings FrogLine Brownbuilt Corner Anchor (Bent Side Plates for Longline/Brownbuilt) + Fixings 2.658

1300 789 545

62
Anchors
Surface Mounted END Anchor (Bent Side Plates for Longline/Brownbuilt)
Lifelines
PRODUCT CODE: STAT.FROGSBB002+FIXINGS

Shuttles/Fittings
SURF-SIDEPLATE-BB SurfaceLink Side Plate BENT+foam 316SS 2
NUT M16_316 Nut: M16 316SS 1
RIVET_8mm(34) Tri-fold Rivet: 8mm 7.7 x 34.0 length (Yellow Seal) Alum 12
Surface Mounted INTERMEDIATE Anchor (Bent Side Plates for Longline/Brownbuilt)

X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 1
Surface Mounted INTERMEDIATE EXTENDED Anchor (Bent Side Plates for Longline/BB)
Intermediate anchor designed to be mounted on the surface of a metal roof profile as
part of a horizontal lifeline system, to limit lifeline span distances.
Tools
PPE
NUT M16_316 Nut: M16 316SS 1
SRL’s
Surface Mounted CORNER Anchor (Bent Side Plates for Longline/Brownbuilt)


SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
63
MEMBRANE MOUNTED FROGLINE
Permanent horizontal height safety lifeline

system, designed to be mounted into
membrane roof construction.
LIFELINES
Install up roof pitches no greater than
Installation of any SafetyLink Lifeline Systems requires face to face
15 degrees and across roof pitches no
training for manufacturer’s accreditation.
greater than 25 degrees.
The structure must be assessed by an engineer, unless it is clear to a
competent person that the structure is adequate. Equipped with an engineered energy
absorbing region to minimise loads on
users and structures in the event of a fall.
Continuous connection with 8mm
stainless steel cable, utilising the
FrogLine Shuttle System, up to four
Installation Manual
users per system, two per span.
MEMBRANE MOUNTED FROGLINE LIFELINE

STAT.FROGSSQ002+TOGGLE FrogLine Membrane SurfaceLink End Anchor 2.904
STAT.FROGSSQ001+TOGGLE FrogLine Membrane SurfaceLink Intermediate Anchor 2.900
STAT.FROGSSQ008+TOGGLE FrogLine Membrane SurfaceLink Intermediate Extended Anchor 3.035
STAT.FROGSSQ003+TOGGLE FrogLine Membrane SurfaceLink Corner Anchor 3.053

1300 789 545

64
Anchors
Lifelines
Membrane END Anchor
End anchor designed to be mounted into steel structures as attachment points for the
Drill four holes with size 30mm holesaw through entire roof sheeting.
Shuttles/Fittings
PRODUCT CODE: STAT.FROGSSQ002
ADV-PLATE-SS-295SQ-Bolt SurfaceLink Plate: 295mmx295mm + Welded Bolt/Washer 316SS 1
NUT M16_316 Nut: M16 316SS 1
TOGGLE001 Toggle Anchors - 300mm 316SS 4
Membrane INTERMEDIATE Anchor

X-Rail
distances.

Roof Access
NUT M16_316 Nut: M16 316SS 1
Membrane EXTENDED INTERMEDIATE Anchor

Tools
distances. Longer tube to enable bending to suit small degree changes in the line.

NUT M16_316 Nut: M16 316SS 1
SRL’s
Membrane CORNER Anchor
Corner anchor designed to be mounted into steel structures. The lifeline cable runs
through the corner anchor point redirecting it by up to 90 degrees.

SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
65
CLAMP MOUNTED FROGLINE
Permanent horizontal height safety lifeline system, designed to be

mounted onto standing seam roof profile.
Install using Friction Clamps, contact SafetyLink to find the bracket
to suit your roof sheeting.
LIFELINES
Brackets clamp to the roof profile with no penetration to the roof Installation of any SafetyLink Lifeline Systems
sheeting for superior waterproofing. requires face to face training for manufacturer’s
Install up roof pitches no greater than 15 degrees and across roof accreditation.
pitches no greater than 25 degrees. The structure must be assessed by an engineer,
Fitted where it is difficult to access the underside of the roof.
Equipped with an engineered energy absorbing region to minimise
loads on users and structures in the event of a fall.
Continuous connection with 8mm stainless steel cable, utilising the
FrogLine Shuttle System, up to four users per system, two per span.
SURFACE MOUNTED FROGLINE LIFELINE (FOR STANDING SEAM ROOF SHEETING)
STAT.FROGPLT002 FrogLine Standing Seam SurfaceLink End Anchor (ADVISE ROOF PROFILE FOR CLAMPS & PLATE SIZES) 3.687
STAT.FROGPLT001 FrogLine Standing Seam SurfaceLink Intermediate Anchor (ADVISE ROOF PROFILE FOR CLAMPS & PLATE SIZES) 3.683
STAT.FROGPLT008 FrogLine Standing Seam SurfaceLink Intermediate Extended Anchor (ADVISE ROOF PROFILE FOR CLAMPS & PLATE SIZES) 3.836
STAT.FROGPLT003 FrogLine Standing Seam SurfaceLink Corner Anchor (ADVISE ROOF PROFILE FOR CLAMPS & PLATE SIZES) 3.863

1300 789 545

66
Anchors
Lifelines
Surface Mounted END Anchor (advise roof profile for Clamp & Plate sizes)
Permanent horizontal lifeline system as attachment points for the cable to start and
terminate at on Standing Seam Roof Profile.
PRODUCT CODE: STAT.FROGPLT002 + PLATE + CLAMPS

Shuttles/Fittings
ADV-PLATE-AL-SIZE see "SURFACE MOUNTED PLATE SELECTOR" on page 69 1
WASHER 70od-SS Washer: 70mm O.D. 316SS 1
NUT M16_316 Nut: M16 316SS 1
S5_?_BRACKET S5_? Clamp (advise roof profile) Alum/SS 4
Surface Mounted INTERMEDIATE Anchor (advise roof profile for Clamp & Plate sizes)
Permanent horizontal lifeline system to limit lifeline span distances on Standing Seam
Roof Profile.
X-Rail
Roof Access
NUT M16_316 Nut: M16 316SS 1
Surface Mounted INTERMEDIATE EXTENDED (advise roof profile for Clamp & Plate sizes)
Permanent horizontal lifeline system to limit lifeline span distances on Standing Seam
Roof Profile.
Tools

WASHER 70od-Plastic Washer: 70mm OD Plastic 2 PPE
NUT M16_316 Nut: M16 316SS 1
SRL’s
Surface Mounted CORNER Anchor (advise roof profile for Clamp & Plate sizes)
The lifeline cable runs through the corner anchor point redirecting it by up to 90 degrees
on Standing Seam Roof Profile.

SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
67
SURFACE MOUNTED PLATE SELECTOR
Weight
Product Code Size Holes Roof Profile Material Fixings
(Kg)
SURFACELINK SIDE PLATES (Precut Holes)
Multitude
SURF-SIDEPLATE 294mm x 302mm x 2mm 187 to 272mm *316SS Rivets 0.749
adjustable side plates
SURFACELINK SIDE PLATES - BENT (Precut Holes)
Brownbuilt Roof Profile

SURF-SIDEPLATE-BB 294mm x 244mm x 2mm 171 to 244mm *316SS Rivets 0.749
adjustable side plates
SURFACELINK PLATE – 295 (Toggle Holes)
ADV-PLATE-SS-295SQ 295mm x 295mm x 1.5mm 4 toggle holes Membrane Roof Profile *316SS Toggles 0.900
SURFACELINK PLATE – STANDARD (Blank)

Rivets
ADV-PLATE-AL-305 305mm x 243mm x 3mm Blank Multitude *MGA or 0.554
S5 Brackets
SURFACELINK PLATE – STANDARD (Precut Holes)
Trimdek (195)
Rivets &
Multitude, hole centres to Corrugated (228) *MGA
ADV-PLATE-AL-305-H 305mm x 243mm x 3mm Screws 0.554
suit roof profiles listed Kliplok (258)
Plywood 15mm (install with 16 x 14 Gauge 50mm Hex Screws)
Klip-lok Classic (700)
Holes at 203mm Rivets &
ADV-PLATE-AL-305-K 305mm x 243mm x 3mm Klip-lok High Strength (700) *MGA 0.554
and 234mm Screws
Klip-lok (406)
Trimdek (195)
Rivets &
Multitude, hole centres to Corrugated (228) *316SS
ADV-PLATE-SS-305-H 305mm x 243mm x 2mm Screws 1.083
suit roof profiles listed Kliplok (258)
1300 789 545
Plywood 15mm (install with 16 x 14 Gauge 50mm Hex Screws)

68
Anchors
SURFACE MOUNTED PLATE SELECTOR
Lifelines
Shuttles/Fittings
X-Rail
Weight
Roof Access
Product Code Size Holes Roof Profile Material Fixings
(Kg)
SURFACELINK PLATE – 370 (Blank)
Rivets
ADV-PLATE-AL-370 370mm x 243mm x 3mm Blank Multitude *MGA or 0.710
S5 Brackets
SURFACELINK PLATE – 370 (Holes)
ADV-PLATE-AL-370-H-318 370mm x 243mm x 3mm Holes at 318mm Multitude *MGA Rivets 0.710
Tools
SURFACELINK PLATE – 370 (Holes)
ADV-PLATE-AL-370-H-333 370mm x 243mm x 3mm Holes at 333mm Multitude *MGA Rivets 0.710

Option 4x Holes Rivets PPE
ADV-PLATE-AL-450 450mm x 243mm x 3mm at 400mm profile Standing Seam *MGA or 1.117
Non Stock Item S5 Brackets
SURFACELINK PLATE – 550 (Blank) for SL Clamps only
ADV-PLATE-AL-550-SLCLAMP 550mm x 296mm x 3mm Blank Standing Seam *MGA SL Clamps 1.365
SRL’s
Holes options on request

ADV-PLATE-AL-550 550mm x 243m x 3mm Standing Seam *MGA S5 Brackets 1.365
Non Stock Item
Holes options on request

ADV-PLATE-AL-650 650mm x 243m x 3mm Standing Seam *MGA S5 Brackets 1.606
Non Stock Item
SafetyLink.com
69
OVERHEAD CONCRETE DONUTLINK FROGLINE

system, designed to be mounted overhead into
concrete.
LIFELINES Significantly reduces the installation time,
Installation of any SafetyLink Lifeline
producing an efficient and cost effective system.
Systems requires face to face training No additional eyebolts needed for load testing.
for manufacturer’s accreditation. Testing done in situ, no dismantling required.
The structure must be assessed by Equipped with an engineered energy absorbing
an engineer, unless it is clear to a Chemical Installation
Adhesive Data Manual region to minimise loads on users and
competent person that the structure
Sheet structures in the event of a fall.
is adequate.
cable, utilising the FrogLine Shuttle System, up
to four users per system, two per span.
OVERHEAD DONUTLINK CONCRETE FROGLINE LIFELINE

STAT.FROGCAR009 FrogLine Concrete Overhead DonutLink End Anchor 0.972
STAT.FROGCAR004 FrogLine Concrete Overhead DonutLink Intermediate Anchor 0.968
STAT.FROGCAR010 FrogLine Concrete Overhead DonutLink Corner Anchor 2.115

STAT.SHUTL002 Overhead Shuttle with Karabiner 93
STAT.CABLE_8mm_1x19_SS Cable: 8mm diameter, 1x19 wire rope, 316 Stainless Steel (Cannot be used with Swageless Fittings) 90
1300 789 545
70
Anchors
Lifelines
DonutLink Concrete Mounted OVERHEAD END Anchor
End anchor designed to be mounted into a concrete overhead structure as attachment

points for the cable to start and terminate at.
Shuttles/Fittings

FROGLINE END_OH FrogLine Base End Overhead 316SS 1
NUT M16_316 Nut: 16mm 316 Stainless Steel 316SS 1
WASHER M16_SPRING_316 Spring Washer: M16 316SS 316SS 1
WASHER M16_DONUT Washer: DonutLink M16 316SS 316SS 1
ROD M16x130mm Anchor Rod M16x130mm (45degcut) 316SS 1
X-Rail
DonutLink Concrete Mounted OVERHEAD INTERMEDIATE Anchor
Intermediate anchor designed to be mounted into a concrete overhead structure to limit

lifeline span distances.
Roof Access

FROGLINE INT_OH FrogLine Base Intermediate Overhead 316SS 1
NUT M16_316 Nut: 16mm 316 Stainless Steel 316SS 1
WASHER M16_DONUT Washer: DonutLink M16 316SS 316SS 1
ROD M16x130mm Anchor Rod M16x130mm (45degcut) 316SS 1
Tools
DonutLink Concrete Mounted OVERHEAD CORNER Anchor
Corner anchor designed to be mounted into a concrete overhead structure. The lifeline
cable runs through the corner tube redirecting it by up to 90 degrees.
Drill a 18mm hole to a minimum of 90mm embedment into concrete structure. PPE

STAT.FROGCAR004 FrogLine DonutLink Concrete Intermediate Overhead 316SS 2
SRL’s
STAT.CTUBE001.01 Corner Tube: 90 degrees 316SS 1
Overhead Lifeline Shuttle

For use on SafetyLink OVERHEAD Lifeline Systems.
No need to disconnect from Lifeline as it passes easily over Intermediate anchors.
Shuttle: Stainless Steel construction, with Nylon Wheels.
Karabiner - stainless steel.
SafetyLink.com
Suits 8mm Cable.
PRODUCT CODE: STAT.SHUTL002

STAT.SHUTL002.01 OVERHEAD Shuttle (Nylon Wheels) 316SS 1
KARBNR034 SafetyLink Karabiner Stainless Steel 1
71
OVERHEAD CONCRETE MOUNTED FROGLINE

designed to be mounted overhead into concrete.
Concrete Insert must be chemically fastened, refer
to chemical Adhesive data sheet in Appendix 1.
LIFELINES FrogLine Bolts installed as part of the FrogLine

Concrete Lifeline allows easy proof load testing
to be completed without the need to remove any
Systems requires face to face training
components from the system.
for manufacturer’s accreditation.
The structure must be assessed by Equipped with an engineered energy absorbing
an engineer, unless it is clear to a Chemical Installation region to minimise loads on users and structures in
competent person that the structure Adhesive Data Manual the event of a fall.
is adequate. Sheet
cable, utilising the FrogLine Shuttle System, up to
OVERHEAD CONCRETE FROGLINE LIFELINE

STAT.FROGCON009 FrogLine Concrete Overhead End Anchor 1.030
STAT.FROGCON004 FrogLine Concrete Overhead Intermediate Anchor 1.026
STAT.FROGCON010 FrogLine Concrete Overhead Corner Anchor 2.231

1300 789 545
72
Anchors
Lifelines
Concrete Mounted OVERHEAD END Anchor
End anchor designed to be mounted into a concrete overhead structure as attachment
Shuttles/Fittings

FROGLINE BOLT FrogLine Eyebolt M16 x 35mm 316SS 1
CON-INSERT ConcreteLink Insert M16 x 90mm 316SS 1
Concrete Mounted OVERHEAD INTERMEDIATE Anchor
X-Rail
Intermediate anchor designed to be mounted into a concrete overhead structure to limit
Roof Access
FROGLINE INT_OH FrogLine Base Intermediate Overhead 316SS 1
FROGLINE BOLT FrogLine Eyebolt M16 x 35mm 316SS 1
Concrete Mounted OVERHEAD CORNER Anchor
Tools
Corner anchor designed to be mounted into a concrete overhead structure. The lifeline
cable runs through the corner tube redirecting it by up to 90 degrees.
PPE

STAT.FROGCON004 FrogLine Concrete Intermediate Overhead 316SS 2
SRL’s

Shuttle: Stainless Steel construction with Nylon Wheels.
Suits 8mm Cable.
SafetyLink.com

73
OVERHEAD STEEL MOUNTED FROGLINE

system, designed to be mounted overhead
onto steel purlin construction.
LIFELINES
Equipped with an engineered energy
Installation of any SafetyLink Lifeline Systems absorbing region to minimise loads on users
requires face to face training for manufacturer’s and structures in the event of a fall.
accreditation.
Continuous connection with 8mm stainless
Installation steel cable, utilising the FrogLine Shuttle
Manual System, up to four users per system, two
per span.
OVERHEAD STEEL MOUNTED FROGLINE LIFELINE

STAT.FROGSTE009 FrogLine Steel Purlin Overhead End Anchor 0.848
STAT.FROGSTE004 FrogLine Steel Purlin Overhead Intermediate Anchor 0.844
STAT.FROGSTE010 FrogLine Steel Purlin Overhead Corner Anchor 1.867

1300 789 545
74
Anchors
Lifelines
Steel Purlin OVERHEAD END Anchor
End anchor designed to be mounted into steel structures as part of a overhead
horizontal lifeline system.
End anchor attachment points for the cable to start and terminate at.
Shuttles/Fittings
Drill a 16mm hole.

NUT M16_316 Nut: M16 316SS 1
X-Rail
Steel Purlin INTERMEDIATE OVERHEAD Anchor
Intermediate anchor designed to be mounted into steel structure as part of an overhead
To limit lifeline span distances.
Roof Access
Drill a 16mm hole.

FROGLINE INT_OH FrogLine Intermediate Overhead 316SS 1
NUT M16_316 Nut: M16 316SS 1
Tools
Steel Purlin OVERHEAD CORNER Anchor
Corner anchor designed to be mounted into steel structure. The lifeline cable runs
through the corner tube redirecting it by up to 90 degrees.
Drill a 16mm hole.
PPE

STAT.FROGSTE004 FrogLine Steel Intermediate Overhead 316SS 2
SRL’s

Suits 8mm Cable.
SafetyLink.com

75
OVERHEAD STEEL TUFF-POST FROGLINE 150/300

system, designed to be mounted overhead onto
steel purlin construction.
LIFELINES
Equipped with an engineered energy absorbing
Installation of any SafetyLink Lifeline Systems region to minimise loads on users and structures
requires face to face training for manufacturer’s in the event of a fall.
accreditation.
The structure must be assessed by an engineer, cable, utilising the FrogLine Shuttle System, up
Installation
Manual to four users per system, two per span.
OVERHEAD STEEL TUFF-POST FROGLINE LIFELINE

STAT.FROGTUFF009S-150R FrogLine Steel TUFF-POST End Overhead Anchor - Raised 150mm 3.971
STAT.FROGTUFF004S-150R FrogLine Steel TUFF-POST Intermediate Overhead Anchor - Raised 150mm 3.967

1300 789 545
76
Anchors
TUFF-POST Raised 150mm Steel Purlin OVERHEAD END Anchor
horizontal lifeline system. End anchor attachment points for the cable to start and
terminate at.
Lifelines
BOLT-M16x50mm-SS Bolt: M16x50mm 316SS Set Screw 316SS 1
WASHER M16_316 Washer: M16 316 Stainless Steel 316SS 1
Shuttles/Fittings
WASHER M12_SPRING_316 Spring Washer: M12 316 Stainless Steel 316SS 2
NUT M12_316 Nut: M12 316 Stainless Steel 316SS 2
TUFF-POST Raised 150mm Steel Purlin OVERHEAD INTERMEDIATE Anchor

horizontal lifeline system to limit lifeline span distances.
X-Rail
Roof Access

terminate at.
Tools
BOLT-M16x50mm-SS Bolt: M16x50mm 316SS Set Screw 316SS 4 PPE
TUFF-POST Raised 300mm Steel Purlin OVERHEAD INTERMEDIATE Anchor

SRL’s


SafetyLink.com

77
OVERHEAD STEEL TUFF-POST FROGLINE 600/900

system, designed to be mounted overhead onto
LIFELINES
Equipped with an engineered energy absorbing
requires face to face training for manufacturer’s
region to minimise loads on users and structures
accreditation. in the event of a fall.
Installation cable, utilising the FrogLine Shuttle System, up
Manual to four users per system, two per span.
OVERHEAD STEEL TUFF-POST FROGLINE LIFELINE


1300 789 545
78
Anchors
terminate at.
Lifelines
Shuttles/Fittings
TUFF-POST Raised 600mm Steel Purlin INTERMEDIATE OVERHEAD Anchor


X-Rail
Roof Access

terminate at.
Tools
BOLT-M16x50mm-SS Bolt: M16x50mm 316SS Set Screw 316SS 4 PPE
TUFF-POST Raised 900mm Steel Purlin INTERMEDIATE OVERHEAD Anchor

SRL’s


SafetyLink.com

79
WALL DONUTLINK CONCRETE FROGLINE

system, designed to be wall mounted into
concrete.
Significantly reduces the installation time,
producing an efficient and cost effective
system.
No additional eyebolts needed for load
testing. Testing done in situ, no dismantling
required. LIFELINES
Equipped with an engineered energy Installation of any SafetyLink Lifeline
absorbing region to minimise loads on Systems requires face to face training for
users and structures in the event of a fall. manufacturer’s accreditation.
Continuous connection with 8mm stainless The structure must be assessed by an
steel cable, utilising the FrogLine Shuttle engineer, unless it is clear to a competent Installation Chemical Adhesive
System, up to four users per system, two person that the structure is adequate. Manual Data Sheet
per span.
WALL MOUNTED DONUTLINK CONCRETE FROGLINE LIFELINE

STAT.FROGCAR002 FrogLine Concrete DonutLink End Anchor 1.023
STAT.FROGCAR001 FrogLine Concrete DonutLink Intermediate Anchor 1.019
STAT.FROGCAR011 FrogLine Concrete DonutLink Corner Wall Anchor 2.217
STAT.FROGCAR006 FrogLine Concrete DonutLink Corner Wall External Anchor 2.938

STAT.SHUTL002 Overhead Shuttle with Karabiner (For use above waist height) 93
STAT.SHUTL003 FrogLine Shuttle with Karabiner (For use below waist height) 93
1300 789 545
80
Anchors
DonutLink Concrete Mounted END Anchor
Lifelines

NUT M16_316 Nut: M16 316SS 1
Shuttles/Fittings
DonutLink Concrete Mounted INTERMEDIATE Anchor
Intermediate anchor designed to be mounted into a concrete structure as attachment

X-Rail
NUT M16_316 Nut: M16 316SS 1
Roof Access
DonutLink Concrete Mounted CORNER WALL Anchor

Concrete anchor designed to be mounted into a concrete wall on internal and external
corners. The lifeline cable runs through the corner tube redirecting it by up to 90
degrees.
Tools

STAT.FROGCAR001 FrogLine Concrete Intermediate 316SS 2
PPE
DonutLink Concrete Mounted (EXTERNAL) CORNER WALL Anchor

Corner anchor designed to be mounted into a concrete wall as part of a horizontal
lifeline system. The lifeline cable runs through the corner anchor point redirecting it by
SRL’s
up to 90 degrees. Wall Bracket made to suit application, contact SafetyLink to quote.

FROGLINE CNR_WM FrogLine Corner WALL 316SS 1
FROGLINE CNR_WM_BRACKET FrogLine Corner WALL Bracket (made to suit) 316SS 1
SafetyLink.com
NUT M16_316 Nut: M16 316SS 1

ROD M12X160MM Anchor Rod: M12x160mm 316SS 4
NUT M12 XRAIL DONUT Nut: DonutLink M12 316SS 4
81
WALL MOUNTED CONCRETE FROGLINE

system, designed to be wall mounted into
concrete.
Concrete Insert must be chemically fastened,
refer to chemical Adhesive data sheet in
Appendix 1.
FrogLine Bolts installed as part of the
lifeline allows easy proof load testing to be
completed without the need to remove any
components from the system. LIFELINES
Equipped with an engineered energy
Systems requires face to face training
absorbing region to minimise loads on users
for manufacturer’s accreditation.
and structures in the event of a fall.
The structure must be assessed by
Continuous connection with 8mm stainless an engineer, unless it is clear to a Installation Chemical Adhesive
steel cable, utilising the FrogLine Shuttle competent person that the structure Manual Data Sheet
System, up to four users per system, two is adequate.
per span.
WALL MOUNTED CONCRETE FROGLINE LIFELINE

STAT.FROGCON002 FrogLine Concrete End Anchor 1.023
STAT.FROGCON001 FrogLine Concrete Intermediate Anchor 1.019
STAT.FROGCON011 FrogLine Concrete Corner Wall Anchor 2.217
STAT.FROGCON006 FrogLine Concrete Corner Wall External Anchor 2.938

1300 789 545
82
Anchors
Lifelines
Concrete Mounted END Anchor
End anchor designed to be mounted into a concrete wall structure as attachment

Shuttles/Fittings

Concrete Mounted INTERMEDIATE Anchor
Intermediate anchor designed to be mounted into a concrete wall structure, to limit
X-Rail
Roof Access
Concrete Mounted CORNER WALL Anchor
Concrete anchor designed to be mounted into a concrete wall on internal and external
corners. The lifeline cable runs through the corner tube redirecting it by up to 90
Tools
degrees.
Components Description Material Qty PPE

STAT.FROGCON001 FrogLine Concrete Intermediate Anchor 316SS 2
Concrete Mounted (EXTERNAL) CORNER WALL Anchor

SRL’s
Corner anchor designed to be mounted into a concrete wall as part of a horizontal

lifeline system. The lifeline cable runs through the corner anchor point redirecting it by
up to 90 degrees.
Wall Bracket made to suit application, contact SafetyLink to quote.

FROGLINE CNR_WM FrogLine Corner WALL 316SS 1
SafetyLink.com
FROGLINE CNR_WM_BRACKET FrogLine Corner WALL Bracket (made to suit) 316SS 1

NUT M16_316 Nut: M16 316SS 1
83
CONCRETE BRACKET WALL MOUNTED

designed to be mounted into concrete wall structure.
Anchor Rod must be chemically fastened, refer to
LIFELINES
Donut Washers installed as part of the FrogLine
Concrete Lifeline allows easy proof load testing to be Installation of any SafetyLink Lifeline Systems requires face
to face training for manufacturer’s accreditation.
completed without the need to remove any components
from the system. Refer to Appendix 2 for pull testing. The structure must be assessed by an engineer, unless it is
to minimise loads on users and structures in the event of
a fall.
utilising the FrogLine Shuttle System, up-to four users
per system, two per span.
Data Sheet
CONCRETE WALL MOUNTED BRACKET FROGLINE LIFELINE

STAT.FROGTUFF002C-BRKT FrogLine Concrete Wall Mounted Bracket End Anchor 1.023
STAT.FROGTUFF001C-BRKT FrogLine Concrete Wall Mounted Bracket Intermediate Anchor 1.019
STAT.FROGTUFF008C-BRKT FrogLine Concrete Wall Mounted Bracket Intermediate Extended Anchor 1.154
STAT.FROGTUFF003C-BRKT FrogLine Concrete Wall Mounted Bracket Corner Anchor 1.172

1300 789 545
84
Anchors
Concrete Bracket END Wall Mounted Anchor
End anchor designed to be mounted into a concrete wall as attachment points for the cable
to start and terminate at.
PRODUCT CODE: STAT.FROGTUFF002C-BRKT
Lifelines
NUT M16_316 Nut: M16 316SS 1
Shuttles/Fittings
Concrete Bracket INTERMEDIATE Wall Mounted Anchor

Intermediate anchor designed to be mounted into a concrete wall, to limit lifeline span
distances.

X-Rail
NUT M16_316 Nut: M16 316SS 1
Roof Access
Concrete Bracket INTERMEDIATE EXTENDED Wall Mounted Anchor

Intermediate anchor with longer tube to enable bending to suit small degree changes in the
line. Designed to be mounted into a concrete wall.
Tools
FROGLINE END FrogLine Base Intermediate Extended 316SS 1
NUT M16_316 Nut: M16 316SS 1
PPE
SRL’s
Concrete Bracket CORNER Wall Mounted Anchor

Corner anchor designed to be mounted into a concrete wall on internal corner. The lifeline
cable runs through the corner anchor point redirecting it by up to 90 degrees.

SafetyLink.com

NUT M16_316 Nut: M16 316SS 1
85
WALL MOUNTED STEEL FROGLINE

system, designed to be wall mounted onto
LIFELINES Equipped with an engineered energy
Installation of any SafetyLink Lifeline Systems absorbing region to minimise loads on users
requires face to face training for manufacturer’s and structures in the event of a fall.
accreditation. Continuous connection with 8mm stainless
The structure must be assessed by an engineer, steel cable, utilising the FrogLine Shuttle
Installation
unless it is clear to a competent person that the System, up to four users per system, two
Manual
structure is adequate. per span.
WALL MOUNTED STEEL FROGLINE LIFELINE

STAT.FROGSTE002 FrogLine Steel Purlin End Anchor 0.841
STAT.FROGSTE001 FrogLine Steel Purlin Intermediate Anchor 0.837
STAT.FROGSTE011 FrogLine Steel Purlin Corner Wall Anchor 1.853

1300 789 545
86
Anchors
Lifelines
Steel Purlin END Anchor
End anchor designed to be mounted into steel structures as part of a wall mounted
End anchor attachment points for the cable to start and terminate at.
Shuttles/Fittings
Drill a 16mm hole.

NUT M16_316 Nut: M16 316SS 1
Steel Purlin INTERMEDIATE Anchor
X-Rail
Intermediate anchor designed to be mounted onto steel purlin construction as part of a
wall mounted horizontal lifeline system.
To limit lifeline span distances.
Drill a 16mm hole.
Roof Access
BOLT-M16x50mm-SS Bolt: M16x50mm (Length to be confirmed) 316SS 1
NUT M16_316 Nut: M16 316SS 1
Tools
Steel Purlin INTERNAL CORNER WALL Anchor
Two Intermediate anchors mounted onto steel purlin construction as part of a wall
mounted horizontal lifeline system. The lifeline cable runs through the corner tube
redirecting it by up to 90 degrees.
Drill a 16mm hole per intermediate.
PPE

STAT.FROGSTE001 FrogLine Steel Intermediate Anchor 316SS 2
SRL’s

Suits 8mm Cable.
SafetyLink.com

87
‘Innovative
Fall Protection’ LIFELINE
FITTINGS
The FrogLine Lifeline’s low profile design
combines effortless energy absorbing capabilities
into every intermediate, end and corner anchor,
consequently incorporating the line energy
absorbers into the system. This inventive
SafetyLink’s horizontal lifeline approach ensures our FrogLine Lifeline systems
systems make traversing are always installed with the maximum energy
absorption possible regardless of the horizontal
along lifelines simple and line length.
easy, eliminating the need to Patented low profile design.
disconnect from the line, our Fast simplified installation.
intermediate and corners are Advanced shock absorbing serpentine.
designed so our innovative Innovative built in fall indicators.
shuttles can glide freely. Solid 316 stainless steel components.
Quick connect shuttle.
Smooth transition over intermediates.
FrogLine In Use Video

1300 789 545
88
Anchors
Lifelines
Shuttles/Fittings
X-Rail
Roof Access
Shuttles/
Fittings Tools
PPE

SRL’s
Supply a large range of fall protection systems that protect workers from the ground up.
Assisted system design, layout and advice.

SafetyLink.com
Extensive technical support with collectively over 100 years of experience in the height safety industry.
89
SAFETYLINK LIFELINE TERMINALS
y
bl
s em Intermediate Assembly End Assembly with
r As
Tensioner and Tension Indicator
rne
Co
Intermediate Assembly
LifeLine Terminals
For use on all SafetyLink lifeline systems.
Compact design for easy installation.
Built-in tension indicator - Pre-Tension indicator disk frees at 800N.
Stainless steel construction.
Intermediate Assembly
Note: 1x19 wire rope cable cannot be used with Swageless fittings.
with Termination
End Assembly
Cable
For use on SafetyLink Lifeline Systems.

316 Stainless steel cable.
8mm diameter.
7x7, 7x19 and 1x19 wire rope.
1300 789 545

STAT.CABLE001 Cable: 8mm 7x7, per metre 316SS 1 0.260
STAT.CABLE001.01 Roll Cable: 8mm 7x7, 305 metres 316SS 1 83
STAT.CABLE001.02 Roll Cable: 8mm 7x7, 500 metres 316SS 1 138
STAT.CABLE_8mm_7x19_SS Cable: 8mm 7x19, per metre 316SS 1 0.260
STAT.CABLE_8mm_1x19_SS Cable: 8mm 1x19, per metre 316SS 1 0.260
90
Anchors
SWAGELESS Terminals
Swageless Terminals.
Simple installation and removal with common hand tools.
Do not reuse jaws or house, contact SafetyLink to replace.
Lifelines
Suits 8mm, 7x7 & 7x19 cable.
STAT.TERMN002 Swageless Termination 316SS 1 0.362

STAT.TENSR002 Swageless Tensioner 316SS 1 0.629
Shuttles/Fittings
STAT.TENSR004 Swageless Tensioner with Tension Indicator 316SS 1 0.815
CRIMP ON Terminals
Crimp On Terminals.
Easy installation with battery powered crimping tool.
Suits 8mm, 7x7, 7x19 & 1 x 19 cable.
X-Rail
STAT.TERMN003 Crimped Termination 316SS 1 0.174
Roof Access
STAT.TENSR003 Crimped Tensioner 316SS 1 0.499
STAT.TENSR005 Crimped Tensioner & Tension Indicator 316SS 1 0.679
SWAGED Terminals
Tools
Swaged Terminals.
Installation requires a Roll Swaging Machine.
Suits 8mm, 7x7, 7x19 & 1 x 19 cable.
PPE

STAT.TERMN001 Swaged Termination 316SS 1 0.236
STAT.TENSR001 Swaged Tensioner 316SS 1 0.551
STAT.TENSR007 Swaged Tensioner with Tension Indicator 316SS 1 0.737
SRL’s
Cable Connector
SafetyLink.com
Cable Connector used to join 8mm cable on long lifelines.

Installation requires battery powered crimping tool.

STAT.CABJOIN SS Cable Connector 316SS 1 0.125
91
LIFELINE SHUTTLES
1300 789 545
92
Anchors
Lifelines
Horizontal Lifeline Shuttle
Shuttles/Fittings
For use on SafetyLink HORIZONTAL Lifeline Systems.
No need to disconnect from Lifeline as it passes easily over
Intermediate anchor points.
Must be used with included SafetyLink Karabiner.
Suits 8mm Cable.

Components Description Material Qty Weight (kg)
STAT.SHUTL003.01 FrogLine Shuttle 316SS 1 0.401
X-Rail
KARBNR034 SafetyLink Karabiner Stainless Steel 1 0.212
Horizontal Overhead Lifeline Shuttle
Roof Access
For use on SafetyLink horizontal OVERHEAD Lifeline Systems.
Suits 8mm Cable.
Tools
STAT.SHUTL002.01 OVERHEAD Shuttle (Nylon Wheels) 316SS 1 0.628
PPE
Horizontal Overhead Lifeline Shuttle
For use on SafetyLink horizontal OVERHEAD Lifeline Systems.

SRL’s

Suits 8mm Cable.

SafetyLink.com
STAT.SHUTL004.01 OVERHEAD Shuttle (Stainless Steel Wheels) 316SS 1 0.943

93
‘Complete
Solutions’
x-rail
x-rail
Users must be trained and competent Innovation and attention to detail is always
in the use of personal protection foremost in our minds when designing new
products. The x-rail Horizontal Rail System
equipment for working at heights and
demonstrates this with its uniquely designed rail.
consult AS/NZS 1891.4 regarding
The rail is designed to achieve access to a wide
selection, use and maintenance.
range of scenarios, forming a complete system.
The SafetyLink x-rail is a Horizontal Rail

A risk assessment and rescue System suitable for use as part of a personal
plan must be completed prior to fall protection system. The x-rail offers a
undertaking any tasks requiring the use Horizontal Rail System with one or multiple Mobile
of this equipment.
1300 789 545
Anchor Points for attaching to. The x-rail

can be installed in three orientations; overhead,
wall and floor.
94
Anchors
Lifelines
Shuttles/Fittings
X-Rail
HORIZONTAL
Roof Access
RAIL SYSTEM
Tools
Australian Made.
PPE
Can be used for a live load (abseiling).
x-rail is suitable when limited fall clearance is available.
Custom made rail sections and corners can also be supplied upon request to meet your personal
requirements.
SRL’s
Easy for pull testing when installed into concrete.

Easily integrated into the structure of a building and allowing continuous movement with innovative
shuttle.
Uniquely designed shuttle is designed to traverse smoothly through the system, eliminating
realignment of shuttle.
SafetyLink.com
The x-rail Horizontal Rail System System is compliant with AS/NZS 1891.2, EN795:2012 and
PD CEN/TS 16415:2013.
The x-rail Horizontal Rail System is rated for up to four (4) users per system and in any span.
95
x-rail HORIZONTAL RAIL SYSTEM
X-RAIL LENGTHS
XRAIL-TR-101-6M Standard Rail x 6 metres 11.874
XRAIL-TR-101-3M Standard Rail x 3 metres 5.937
XRAIL-TR-104 Standard Rail Corner, Bend 90 degrees (Floor Mounted) 1.292
XRAIL-TR-105 Standard Rail Corner, Bend 90 degrees (External Wall Mounted) 1.293
XRAIL-TR-106 Standard Rail Corner, Bend 90 degrees (Internal Wall Mounted) 1.292
XRAIL-TR-107 Standard Rail Corner, Bend 45 degrees (Floor Mounted) 0.814
XRAIL-TR-108 Standard Rail Corner, Bend 45 degrees (External Wall Mounted) 0.814
XRAIL-TR-109 Standard Rail Corner, Bend 45 degrees (Internal Wall Mounted) 0.814
XRAIL-TR-110 Standard Rail Corner, Bend JOG 1.121
XRAIL-TR-111 SPECIAL** Custom Rail Corner TBA
X-RAIL COMPONENTS & KITS

XRAIL-TR-201 Conceal Fix End and Intermediate Bracket 0.103
XRAIL-TR-203 End Bracket 0.978
XRAIL-TR-204 Intermediate Bracket 0.219
XRAIL-TR-212 Rail Join Dowel 0.150
XRAIL-TR-213 Rail End Cap 0.012
XRAIL-TR-216 Jog Offset Bracket (Available in kit TR-020, TR-021) 1.121
XRAIL-TR-002 Rail Join Kit 0.405
XRAIL-TR-005 Rail Join Kit (Concealed) 0.300
XRAIL-TR-006 Shuttle Stop 0.115
XRAIL-TR-GATE XRAIL Gate, Shuttle Entry-Exit 1.279
XRAIL-TR-008 System Termination Kit 0.188
XRAIL-TR-014 XRAIL Shuttle 0.696
XRAIL-TR-019 Concealed Fix Assembly - for Steel Mounted 0.147
XRAIL-TR-020 90 Degree Side Mounted (External Wall Corner Kit) 10.014
XRAIL-TR-021 45 Degree Side Mounted (External Wall Corner Kit) 9.536
XRAIL-TR-022 Joint Kit with Side Anchors 1.023
XRAIL-TR-WARN XRAIL Warning Sign 0.180
X-RAIL FIXINGS
CON-M12x160-XDONUT Anchor Rod Kit_ M12x160mm (For use in concrete) 0.137
CON-CHEM-FISV.300 Concrete Chemical Mortor - FIS V 300ml Cartridge 0.623
XRAIL-TR-012 Steel Fixing Kit (For use in steel) 0.076
1300 789 545
ADAPTER M12-M16 M12 to M16 Thread Retrofit Adapter 0.026
X-RAIL TOOLS
XRAIL-TR-401 XRAIL Drill Bit to suit TR-101, TR102 0.130
XRAIL-TR-402 XRAIL On-site Drill Fixture 0.492
DONUTLINK-ADP DonutLink: M16 Adapter 0.550
96
Anchors
x-rail - RAIL
3 and 6 metre aluminium rail is used to extend rail line to

required length.
PRODUCT CODE: XRAIL-TR-101-3M OR 6M
Lifelines
XRAIL-TR-101-6M Rail length 6 metres Aluminium 1
XRAIL-TR-101-3M Rail length 3 metres Aluminium 1
x-rail - RAIL JOIN KIT
Shuttles/Fittings
Join kit is designed to join straight rail lengths together.
PRODUCT CODE: XRAIL-TR-002

XRAIL-TR-206 Rail Join Aluminium 1
XRAIL-TR-907(OTS) M10 x 40 Countersunk Cap Screw 316SS 4
XRAIL-TR-212 Rail Dowel Aluminium 1
x-rail - RAIL JOIN KIT CONCEALED
Joiner kit concealed version is designed to join straight rail lengths
X-Rail
together but remain hidden from sight.

XRAIL-TR-211 Rail Connector 316SS 1
Roof Access
XRAIL-TR-212 Rail Dowel Aluminium 1
x-rail - SYSTEM TERMINATION
System termination kit is installed at the end of the system and is

designed to stop the rail sliding out.
Tools
XRAIL-TR-209 System Termination Aluminium 1
x-rail - SHUTTLE STOP PPE

Shuttle stop is designed to stop the shuttle from being removed.

XRAIL-TR-006 Shuttle Stop Aluminium 1
SRL’s
SCREW CAP M10X30 Screw: M10 x 30mm Button Head Cap 316SS 1
x-rail - SHUTTLE
Shuttle is rated for one user, the shuttle allows for seamless
movement with the capability to lock the shuttle in position providing
SafetyLink.com
a stable connection when abseiling.

XRAIL-TR-014 Shuttle Aluminium/316SS 1
97
x-rail - FIX FOR INTERMEDIATE & END (CONCEALED)
Concealed fixing for End and Intermediate anchor, is used for both
concrete and steel mounted systems.
XRAIL-TR-201 End & Intermediate Anchor (Concealed) Aluminium 1
x-rail - INTERMEDIATE BRACKET (SIDE FIX)

Intermediate bracket is used for both concrete and steel mounted
systems.
XRAIL-TR-204 Intermediate Bracket (Side Fix) Aluminium 1
x-rail - END BRACKET (SIDE FIX)

End bracket is used for both concrete and steel mounted systems.
XRAIL-TR-203 End Bracket (Side Fix) Aluminium 1
x-rail - CONCEALED FIX KIT

Concealed Fix Assembly for steel mounted systems.
XRAIL-TR-019 Concealed Fix Kit Aluminium/316SS 1
x-rail - 45 DEGREE EXTERNAL WALL CORNER KIT (SIDE FIX)

45 degree corner kit is used to redirect rail line on an external wall
for steel and concrete.
XRAIL-TR-005 Rail Join (Concealed) Kit 316SS 2
XRAIL-TR-105 Standard Rail Corner, Bend 90 degree External Aluminium 1
XRAIL-TR-110 Standard Rail Corner, Bend JOG Aluminium 2
XRAIL-TR-216 Jog Offset Bracket (Available in kit TR-020, TR-021) 316SS 4
BOLT-M12x35mm-SS M12 x 35mm Bolt 316SS 8
FASTENERS M12 M12 Nut, Washer, Spring Washer 316SS 8
x-rail - 90 DEGREE EXTERNAL WALL CORNER KIT (SIDE FIX)

90 degree corner kit is used to redirect rail line on an external wall
for steel and concrete.
1300 789 545

XRAIL-TR-005 Rail Join (Concealed) Kit 316SS 2
XRAIL-TR-108 Standard Rail Corner, Bend 45 degree External Aluminium 1
BOLT-M12x35mm-SS M12 x 35mm Bolt 316SS 8
FASTENERS M12 M12 Nut, Washer, Spring Washer 316SS 8
98
Anchors
Lifelines
x-rail - 90 DEGREE FLOOR CORNER
90 degree floor corner is used to redirect rail line around corner.
Shuttles/Fittings
XRAIL-TR-104 Standard Rail Corner, Bend 90 degrees Aluminium 1
x-rail - 45 DEGREE FLOOR CORNER
45 degree floor corner is used to redirect rail line around corner.
X-Rail
XRAIL-TR-107 Standard Rail Corner, Bend 45 degrees Aluminium 1
x-rail - 90 DEGREE WALL EXTERNAL CORNER
Roof Access
90 degree wall external corner is used to redirect rail line on an
external wall.

XRAIL-TR-105 Standard Rail Corner, Bend 90 degrees External Aluminium 1
x-rail - 45 DEGREE WALL EXTERNAL CORNER
Tools
45 degree wall external corner is used to redirect rail line on an
external wall.

XRAIL-TR-108 Standard Rail Corner, Bend 45 degrees External Aluminium 1 PPE
x-rail - 90 DEGREE WALL INTERNAL CORNER

90 degree wall internal corner is used to redirect rail line on internal
wall.
SRL’s

XRAIL-TR-106 Standard Rail Corner, Bend 90 degrees Internal Aluminium 1
x-rail - 45 DEGREE WALL INTERNAL CORNER

SafetyLink.com
45 degree wall internal corner is used to redirect rail line on internal

wall.

XRAIL-TR-109 Standard Rail Corner, Bend 45 degrees Internal Aluminium 1
99
x-rail - CORNER JOG
x-rail Corner jog is designed for approaching wall mounted corners.

x-rail - JOG OFFSET BRACKET

x-rail Jog offset bracket is used for wall mounted corners.

x-rail - RAIL JOIN DOWEL

x-rail Join dowel is used for holding together two rail sections.

XRAIL-TR-212 Rail Join Dowel Aluminium 1
x-rail - GATE
x-rail Gate, shuttle entry/exit.
PRODUCT CODE: XRAIL-TR-GATE

XRAIL-TR-GATE Gate, shuttle entry/exit Aluminium 1
x-rail - CONCRETE STUD

x-rail concrete stud is used for fixing rail line to concrete structures.
PRODUCT CODE: CON-M12X160-XDONUT

ROD-M12x160 Anchor Rod M12 x 160mm 316SS 1
NUT M12 XRAIL DONUT M12 XRAIL Donut 316SS 1
WASHER M12 Spring_316 M12 Spring Washer 316SS 1
WASHER M12_316 M12 Washer 316SS 1
x-rail - STEEL FIXING KIT

x-rail steel fixing kit is used for fixing rail line to steel structures.
1300 789 545

BOLT-M12x50mm-SS M12 x 50mm Bolt ***LENGTH TO BE CONFIRMED 316SS 1
NUT M12_316 M12 Nut 316SS 1
WASHER M12 Spring_316 M12 Spring Washer 316SS 1
WASHER M12_316 M12 Washer 316SS 1
100
Anchors
x-rail - END CAP
x-rail end cap is used to cap off end of rail line.

XRAIL-TR-213 End Cap Plastic 1
Lifelines
x-rail - ADAPTER M12-M16
x-rail M12 to M16 Thread Retrofit Adapter.
PRODUCT CODE: ADAPTER M12-M16
Shuttles/Fittings
ADAPTER M12-M16 M12 to M16 Threaded Retrofit Adapter 316SS 1
x-rail - WARNING SIGN

x-rail Warning entry sign.
PRODUCT CODE: XRAIL-TR-WARN

XRAIL-TR-WARN Warning Sign 1
X-Rail
x-rail - CONCRETE STUD ADHESIVE
Fischer FIS V 300T Injection Mortar is the ideal chemical adhesive

to use when installing SafetyLink height safety systems.
Roof Access
The injection cartridge is for use with a standard caulking gun.
Partially used cartridges can be re-used by changing the mixing
nozzle.
PRODUCT CODE: CON-CHEM-FISV.300

CON-CHEM-FISV.300.01 Concrete FIS V 300ml Cartridge Mortar 1
CON-CHEM-FISMR Static Mixer FIS MR Plastic 2
Tools
x-rail - DRILL ON-SITE FIXTURE
x-rail on-site drill fixture.

Components Description Material Qty PPE
XRAIL-TR-402 XRAIL On-site Drill Fixture Metal 1
SRL’s
x-rail - DRILL BIT

Rail drill bit is used to drill holes in required location for rail line.
XRAIL-TR-401 Drill Bit HSS 1
SafetyLink.com
x-rail - CONCRETE PULL TEST ADAPTER

Concrete pull test adapter is used to pull test concrete fixings
on rail line.
PRODUCT CODE: DONUTLINK-ADP
DONUTLINK-ADP DonutLink Adapter Hardened/Tempered Steel 1
101
‘Innovative SafetyLink’s patented ladder stabilisers are
an essential entry point to any height safety
Fall Protection’ system.
The LadderLink stabilises your ladder preventing

sideways movement and therefore holding your
ladder safely in place and protecting the worker.
The Fixed LadderLink has been manufactured

from marine grade aluminum, a durable light
weight product for ease of installation.
SafetyLink have finished this product off with a

protective membrane in the form of a powder
coat finish, this ensures your product is ready
for any additional colouring you would like to
apply.
Roof
LadderLink Installation Video
on Tile Roof
LadderLink Installation Video

1300 789 545
on Metal Roof
102
Anchors
Lifelines
Shuttles/Fittings
X-Rail
Roof Access
Access
Tools
PPE
SafetyLink manufactures Height Safety Anchor and Lifeline systems which provide restraint and fall
arrest safety for all buildings and industrial sites, from a series of anchor points to a complete network
of systems for maintenance, cleaning, access and inspections where working at heights.
In order to complete your height safety system SafetyLink stock:

SRL’s
Ladder stabiliser brackets with ladder strap.
Certification labels for individual anchor points.
Warning signs with essential entry point information, providing dates of installation and certification
of the height safety system.
SafetyLink.com
First man up strops.
103
LADDER ACCESS BRACKETS
Ladder Strap
The Ladder Restraint Strap is to be used in conjunction with SafetyLink’s Fixed
LadderLink.
Secure your ladder to the Fixed LadderLink ensuring the strap is tensioned and
installed under the support cradle to prevent tripping hazards.
WARNING: Not suitable for permanent outdoor installation.

LADFX009 Ladder Strap Webbing 1 0.210
LadderLink (Fascia Mounted)

Fascia mounted ladder bracket.
Quick and easy installation.
Essential entry point system to stabilise your ladder stopping sideways
movement and therefore holding the ladder in place safely.
In addition the LadderLink bracket has two tie off points to aid in securing the
ladder in position.

LADFX008 LadderLink: Fascia Mounted *MGA 1 1.046g
LadderLink (Parapet)
Parapet mounted ladder bracket, fixes directly onto parapet.
In addition the LadderLink bracket has two tie off points to aid in securing the
ladder in position.
Secure with a minimum of four appropriate fixings, see manual.

LADFX010 Fixed LadderLink: Parapet Mounted *MGA 1 2.290
Rope Guide Bracket

Guides your ropes and protects your ropes from being damaged when
abseiling over a sharp edge or gutter.
One person user, easy to install and non-obtrusive.
1300 789 545
Protects the guttering systems from rope pressure and damage.

Can be permanently installed or removed after use.
Eyelets are not rated as anchor points, for use with strap to contain abseil rope.

LADFX007 Rope Guide Bracket *MGA 1 3.415
104
Anchors
Essential entry point system to any height
Lifelines
safety system, quick and easy installation.
LadderLink stabilises your ladder

preventing sideways movement and
therefore holding your ladder in place.
Adjusting the pitch of the LadderLink is
Shuttles/Fittings
to be done by a sheet metal fabricator’s
bending machine.
Protects gutters and barge capping.
LadderLink (Standard)
Quick and easy installation, protects gutters.
Essential entry point system to stabilise your ladder.
X-Rail
In addition, the LadderLink bracket has two tie off points to aid in securing the
ladder in position.
Can be installed under or over roof sheets.

LADFX001 Fixed LadderLink *MGA 1 2.290
Roof Access
LadderLink (Extended)
To extend beyond box gutters and larger areas.
980mm gutter to end, overall length 1115mm.
ladder in position.
Tools
LADFX002 Fixed LadderLink: Extended *MGA 1 6.600
LadderLink (Wall Mounted)

PPE
Wall mounted ladder bracket, fixes directly onto wall.
ladder in position.
Secure with a minimum of four appropriate fixings, see manual.
SRL’s

LADFX003 Fixed LadderLink: Wall Mounted *MGA 1 2.290
LadderLink (20 - 30 degrees pitch)

Quick and easy installation on pitches 20-30 degrees.
Essential entry point system to stabilise your ladder.
SafetyLink.com
ladder in position.

LADFX001-30 Fixed LadderLink: Bent 20-30 degrees *MGA 1 2.290
*MGA = Marine Grade Aluminium 105

ENTRY ACCESS
Certification Labels
Certification Labels supplied in packet of 100.

Labels contain serial numbers for use in computer tracking systems.
Supplied with permanent marker.
To be used for marking each individual anchor point for certification
purposes.
Made from High Density Polyethylene.
Protective clear cover to prevent removal of text from weather or
tampering.
Product Code Description Qty Weight (kg)

LABEL001 Certification Labels 1 0.157
Inspection Tag
SafetyLink Tag to be used for marking each individual anchor point

for inspection month and year.
Inspection Tag contains serial numbers for use in tracking systems.
Hole puncher is required to place hole on required month.

CERT-TAG_Y_30.100 SafetyLink Next Insp Due Yellow Tag (30cm) 100 0.100
Warning Entry Compliance Sign
Essential entry point information for safety system.

Notes installer information, safe use and inspection details.
1300 789 545
Size 300mm x 120mm x 1mm.

WARNG001 Warning Compliance Entry Sign 1 0.080
106
Anchors
Lifelines
Shuttles/Fittings
X-Rail
First Man Up Strop
Used as first man up system; reduces the amount of entry access anchors
required.
Supplied QuickLink to be attached to a load rated anchor.
Roof Access
Attachment end should be secured with a strop hook when not in use to
ensure it can be accessed from a safe area for next use, strop hook (below)
sold separately.
UV plastic coated to prevent wear on roof sheeting.
15kN Rated.
Tools
STROP001 1m First man up Strop 316SS/PVC 1 0.353
STROP001.5 1.5m First man up Strop 316SS/PVC 1 0.440
PPE
Contact SafetyLink for site specific required lengths
Strop Hook with Sign

SRL’s
NOT INCLUDED with strops, order separately.

Secures the attachment point of the strop when not in use, ensuring wind
cannot blow the strop away from the access point.
Please note this is not a load rated anchor, only to be used as an accessory to
secure the strop.
Hook can be secured with 2 screws or 2 rivets.
Sprung Gate for easy and secure use.
SafetyLink.com

Strophook+Sign Strop Hook with Warning Sign 316SS 1 0.048
107
‘Complete
Solutions’
TOOLS
Riveting tools for installing

SafetyLink’s surface mounted roof
anchors.
Crimping tools for crimping

tensioners and terminations to the
cable on lifeline systems.
Hydrajaws tester for testing

concrete anchors.
1300 789 545
108
Anchors Lifelines Shuttles/Fittings X-Rail Roof Access Tools PPE SRL’s SafetyLink.com
109
Tools
RIVET TOOLS
SafetyLink Hand Rivet Tool
Designed for installing height safety surface mounted anchor points.

Lightweight and simple operation.
Three piece jaws made of CR Mo steel provides long lasting tool life.
Designed for use with 8mm Tri-fold rivets.
Waste container for tidy collection of mandrels.
Supplied with handy hex tool for removing and maintaining nose piece
and jaws
Maximum Rivet Size: 8mm.
Length 320mm.

HANDTOOL001 SafetyLink Hand Rivet Tool 1 1.200
Rivet - 8mm
Aluminium Tri-fold Rivets.

Diameter 7.7mm.
1300 789 545
Product Code Description Seal Grip mm Hole mm Qty Weight (kg)

RIVET_8mm(27.7) 8mm Tri-fold Rivet Green 1.1-9.5 7.8-8.2 1 0.007
RIVET_8mm(34) 8mm Tri-fold Rivet Yellow 6.4-15.9 7.8-8.2 1 0.009
RIVET_8mm(39) 8mm Tri-fold Rivet Black 9.5-19.1 7.8-8.2 1 0.011
110
Anchors
Gesipa Powerbird BT
Includes extra battery with case, used in conjunction with Tri-fold

rivets, (Drill Size 7.8-8.2mm, 27.7mm length, 1.0-9.5mm grip range).
Constant forward and backward speed of the jaw assembly.
Immediate repositioning of the jaw assembly after completion of the
setting process saves energy and increases setting frequency.
Lifelines
Electronic control, no mechanical switching.
Electronic temperature and overloading monitor.
High efficiency through ball screw drive with low energy dispersion.
3 piece anti-wear jaws.
Nosepieces: - 3/16’’, 5mm, 6mm, 1/4’’, extended nosepieces
Shuttles/Fittings
available.
Disposal of spent mandrel through action of gravity, either forwards
through the nosepiece or backwards into the spent mandrel
container.

GESIPA001.01 Gesipa Powerbird BT Cordless Rivet Tool 1 5.073
Gesipa PowerPack Pro Cordless Kit

The light-emitting diodes precisely aligned to the work piece are
integrated into the adjustable ring. There are three possible switch
X-Rail
positions: process-controlled, torch function, lighting off.
Charging unit with quick-charge function. The battery can be used
again after only 45 minutes of charging, and is fully charged after 1.5
hours.
When the battery is discharged, the tool switches off automatically
at the end of the setting process. Battery includes acoustic charge
indicator. Charging time 45 minutes.
Roof Access
Improved setting force. Shortened pulling process. Increased stroke.
Fast setting frequencies. Traction power: 15,000 N.
Drive: Brushless DC motor. Stroke: 25.0 mm.
Working range: rivets up to Ø 6.4mm all materials, up to Ø 8mm alu.
blind rivets up to Ø 7.7mm all materials.

GESIPA004 Gesipa PowerPack PRO Cordless Kit 1 2
Tools
Gesipa Tool HN 2-BT
Gesipa Hand Rivet Tool (HN 2-BT).

Used in conjunction with 8mm Tri-fold rivets.
Drill size 7.8-8.2mm. PPE
Length 27.7mm.
Grip Range 1.0-9.5mm.
Technical Data:
Stroke: 10mm.
Length: 577mm.
SRL’s

GESIPA001.02 Gesipa Hand Rivet Tool (HN 2-BT) 1 2.071
Rivet Tool Side Ejector Nose Piece
Nose Piece: 9/32BT Side eject nose assembly and Adapter.

SafetyLink.com
Eliminate swarf contamination within the tool.

Prevents possible damage to the nose/jaw assembly and saves time
in cleaning.
Saves battery power with larger stroke.

GESIPA-RV8840-9K 9/32BT Side eject nose assembly & Adapter 1 0.235
111
CRIMPING TOOLS
The battery powered Crimping Tool is used to crimp the Tensioner and Termination to the horizontal and vertical
lifelines. Please see installation manual for maintenance instructions to look after your new tool.
1300 789 545
112
Anchors
Crimping Tool 18V + DIE
Battery powered Crimping Tool.
Lifelines
Able to rotate for different working positions.
Features: 42mm C-Jaw Opening.
With 360 degrees swivel head.
For connector, cable lug hexagon crimping.
Shuttles/Fittings
Standard die set (total 10pcs): 35/50/70/95/120/150/185/2
40/300/400mm² (i.e. B3035-B30400) (R30 Type).
Battery & Charger Set Model No: B-04 (18V DC Li-Ion

Battery/ 4Ah).
Tool Dimension (reference only): 440(L)*290(W)*78(H)mm.
Crimping range: 6-400mm (AWG10-750MCM).
Complete unit with extra Die to crimp 8mm cable (use with
STAT.TENSR003, STAT.TENSR005 & STAT.TERMN003).
X-Rail
Roof Access
Crimping Tool Die
Die for battery powered crimping tool.
Required for 8mm Cable, for use with STAT.TENSR003,

STAT.TENSR005 and STAT.TERMN003.
Tools
Size A/F10.83.
PPE
PRODUCT CODE: STAT.CRIMP_EPB-4201+DIE

SRL’s
STAT.CRIMP_EPB-4201+DIE Complete Tool: 18V Li Ion Battery Crimper 35-400mm with Batteries/Charger/Die 1 8.194
SEPARATE PARTS BELOW

STAT.CRIMP_EPB-4201 Tool: 18V Li Ion Battery Crimper 35-400mm (with Batteries/Charger) 1 8.069
STAT.CRIMP_EPB-4201.01 Tool: 18V Li Ion Battery Crimper 35-400mm (without Batteries/Charger) 1 6.345
STAT.CRIMP_B-04 Battery: 18V 4Ah for EP Crimping Tools (B-04) 1 0.874
STAT.CRIMP_CH-07 Charger: for 18V Battery for EP Crimping Tools (CH-07) 1 0.775
SafetyLink.com
STAT.CRIMP.DIE Die: for Crimping 8mm Cable 1 0.194
113
HYDRAJAWS PULL TESTERS
To comply with recognised

Industry Standards each
concrete insert must be tested
after installation and at every
recertification inspection.
Ensure you wait the recommended

curing time as specified by the
chemical anchor instructions.
The pull test can be done using a

16mm threaded eyebolt/DonutLink
Adapter. Test consists of ultimate
pull out force proof loading to 50%
of design purpose of anchorage.
CONCRETE ADHESIVE MORTOR
Fischer FIS V 300T Injection Mortar is the ideal chemical adhesive to use
when installing SafetyLink height safety systems.
Partially used cartridges can be re-used by changing the mixing nozzle.

Components Description Material Qty Weight (kg
CON-CHEM-FISV.300.01 Concrete FIS V 300ml Cartridge Mortar 1 0.603
CON-CHEM-FISMR Static Mixer FIS MR Plastic 2 0.200
DonutLink Adapter
DonutLink adapter is used to pull test DonutLink Washer on concrete

1300 789 545
anchors and lifelines.

PRODUCT CODE: DONUTLINK-ADP
DONUTLINK-ADP DonutLink Adapter Hardened/Tempered Steel 1 0.600
114
Anchors
Hydrajaws Pull Tester - M2000 Scaffold Tie Tester Kit
The Hydrajaws Scaffold Tie Tester Kit will test all types of anchors most
commonly used for anchoring scaffold ties up to a maximum tensile load of
25kN. Adapters include a standard Bolt Test Adapter, M16 Threaded Stud
Adapter and M12 Ringbolt Adapter Clevis which means a wide range of
fixings can be tested.
Lifelines
Detachable dual scale 25kN Analogue or Digital Gauge.
Load spreading bridge with adjustable telescopic legs and swivel feet.
Bolt tester Adapter with M12 locking Adapter.
Turning Handle with 22mm integrated nut (for use in confined spaces).
Calibration certificate (valid for 12 months).
M12 Ringbolt Adapter Clevis.
Shuttles/Fittings
M16 Threaded Stud Adapters.
M16 HT Hex set screw.
M16 x120mm stud bolt.
Robust carry case.
Full operating instructions.
Product Code Description Qty Weight (Kg)
TESTER-200-014 M2000 Scaffold Tie Tester Kit with 0-25kN Analogue Gauge 1 12
TESTER-200-014+ADP M2000 Scaffold Tie Tester Kit with 0-25kN Analogue Gauge + DonutLink Adapter 1 12.6
TESTER-200-015 M2000 Scaffold Tie Tester Kit with 0-25kN Digital Gauge 1 12
TESTER-200-015+ADP M2000 Scaffold Tie Tester Kit with 0-25kN Digital Gauge + DonutLink Adapter 1 12.6
X-Rail
Hydrajaws Pull Tester - M2000 Lifeline Tester Kit 2 & Kit 1
Lighter, more compact and very user friendly, the Hydrajaws Safety Lifeline
Anchor Tester clamps directly to the 8mm wire rope and will test all the swaged
components during installation and for annual inspections in accordance with
existing safety standards.
Roof Access
Test Frame fitted with Extension Bars.
Knurled Cable Adapter 8mm (10mm & 12mm optional).
Detachable dual scale 25kN Analogue or Digital Gauge.
Turning Handle with 22mm integrated nut.
Load spreading bridge with adjustable telescopic legs and swivel feet.
Bolt tester Adapter with M12 locking Adapter.
M12 Ringbolt Adapter Clevis.
M12 & M16 Threaded Stud Adapters.
M12 Threaded Stud Adapter Coupler.
Tools
Calibration certificate (valid for 12 months).
Robust carry case.
Full operating instructions.
Product Code Description Qty Weight (Kg)

TESTER-030-002 M2000 KIT2 LIFELINE (A) METRIC with 0-25kN Analogue Gauge 1 17
TESTER-030-002+ADP M2000 KIT2 LIFELINE (A) METRIC with 0-25kN Analogue Gauge + DonutLink Adapter 1 17.6 PPE
TESTER-030-003 M2000 KIT2 LIFELINE (D) METRIC with 0-25kN Digital Gauge 1 17
TESTER-030-003+ADP M2000 KIT2 LIFELINE (D) METRIC with 0-25kN Digital Gauge + DonutLink Adapter 1 17.6
TESTER-030-001 M2000 KIT1 LIFELINE FRAME ONLY (TO USE WITH M2000 KIT) 1 9
Hydrajaws Bluetooth Digital System

SRL’s
The Dashboard contains all essential information including:

All company devices and their calibration dates.
All company users and licences.
A GPS map containing all test sites.
A list of Hydrajaws Approved International Service Centres.
Download the app from the Google Play Store or the Apple App
SafetyLink.com
Store and start your free trial. * Requires a monthly subscription.

Gauge, laptop and mobile not included.
The Hydrajaws Bluetooth Digital system allows on-site pull tests to be automatically recorded and compiled into a digital report using
the Hydrajaws Bluetooth Digital App on a mobile phone or tablet device. These reports can be sent directly to clients or managers
and are stored in the cloud to be accessed remotely anywhere on a browser in a users own company dashboard. The comprehensive
report will include all test information including a pass or fail result, a visual results graph, fixing details, site location co-ordinates, date
and time. Notes, images and photos taken on-site can also be added. Using the Dashboard a company administrator can review all
test reports from all company users. They can also add notes to reports and send them directly to customers.
115
‘Complete
Solutions’
Users must be trained and competent

in the use of personal protection
A risk assessment and rescue

plan must be completed prior to
undertaking any tasks requiring the use
of this equipment.
1300 789 545
116
Anchors
Lifelines
Shuttles/Fittings
X-Rail
PERSONAL
Roof Access
PROTECTIVE
Tools
EQUIPMENT PPE
All products must be used within their intended design only.

SRL’s
Failure to follow all warnings and instructions may result in a serious

injury or death.
Harnesses must be inspected as safe every time before and after
each use.
Six monthly logged safety inspections are to be completed by a
SafetyLink.com
competent person (refer to harness care/maintenance instructions).
117
ROOF WORKERS KIT
SafetyLink’s XtraLight harness is fitted with all alloy hardware to reduce weight on the user.
5 point adjustable XtraLight harness which caters for a wider range of personnel.
XtraLight harness equipped with dorsal extension strap for ease of connection to rear fall arrest point.
20 metre rope line with lightweight rope grab and built in energy absorber to give you greater access.
SafetyLink’s roofers kit protects users up to 140kg.
Aluminium double action karabiners with 16kN gate strength to help eliminate forced rollout.
Heavy duty backpack with external clear window for inspection record card storage.
SafetyLink’s XTRALIGHT TEMPLINK ROOFERS KIT includes extra
Suspension Trauma Relief Straps
SafetyLink TempLink 3000 (Temporary Roof Anchor)
XtraLight Roof Workers Kit
ROOFKIT_SL
Product Code Description Qty
HARNES017 XtraLight Harness 1
ROPELN013 20m Rope Line 1
ASTRAP003 Anchor Strap 1
KARBNR022 Karabiner 2
BAGSL01 Gear Bag 1
XtraLight Roof Workers Kit with TempLink & Trauma Relief Straps
ROOFKIT_SL+TEMPLINK
Product Code Description Qty
HARNES017 XtraLight Harness 1
ROPELN013 20m Rope Line 1
ASTRAP003 Anchor Strap 1
KARBNR022 Karabiner 2
BAGSL01 Gear Bag 1
TRAUMA002 Trauma Relief Strap Set 1
TEMPL003 Temporary Anchor 1
Temporary Anchor
The TempLink can be installed directly on timber rafters or through

metal roof sheeting to battens, secure with six (6) 14g 75mm
roofing screws.
One person anchor.
1300 789 545
UV coated cable, protective rubberised sleeve preventing damage to

roof materials.
Eyelet 33.8mm ID.
PRODUCT CODE: TEMPL003

TEMPL003 Temporary Anchor 316SS 1
118
Anchors
Harness XtraLight
Lightweight. Front and Rear attachment points.
Gear Loops for rescue scenarios.
Adjustable quality alloy buckles creating maximum user adjustment.
Equipped with dorsal extension strap for ease of connection to rear
fall arrest point on HARNES017 only.
Lifelines
Traceability label pack includes a page that can be easily marked with
site specific traceability documentation.
PRODUCT CODE: HARNES017 & HARNES018

HARNES017 XtraLight Harness Nylon/Alloy 1
Shuttles/Fittings
HARNES018 XtraLight Harness (without Dorsal Ext Strap) Nylon/Alloy 1
Rope Line 20m

20 metre Adjustable Rope Line.
Light weight alloy Rope Grab.
140kg Shock Pack and two Karabiners.
PRODUCT CODE: ROPELN013

ROPELN013 20m Rope Line Alloy 1
Anchor Sling
X-Rail
1.5 metre red 20mm Webbing Anchor Strap.
Flat construction.
Rated to 21kN.
PRODUCT CODE: ASTRAP003
Roof Access
ASTRAP003 Anchor Strap Nylon 1
Karabiner
High strength aluminium Karabiner.
Minimum breaking strength Rated 23kN.
Gate opening 17mm.
Double action, 16kN Rated gate strength.
Tools
PRODUCT CODE: KARBNR022
KARBNR022 Karabiner Alu 2
Gear Bag
Heavy duty nylon. PPE
Easy fold down opening, convenient to carry.
Top carry handle.
Adjustable chest and waist straps.
External clear window for inspection record card storage.
SRL’s
PRODUCT CODE: BAGSL01

BAGSL01 Gear Bag Nylon 1
Trauma Relief Straps
Suspension trauma relief straps.

To be used in conjunction with a full body harness.
SafetyLink.com
Designed to aid in the prevention of suspension trauma after a fall

from height has occurred.
PRODUCT CODE: TRAUMA002

TRAUMA002 Trauma Relief Strap Set Nylon 1
119
SafetyLink supply all height safety
‘Complete equipment to all industries - buildings,
Solutions’ commercial and industrial sites.
From a series of anchor points to

a complete network of systems for
maintenance, cleaning access and
inspections, SafetyLink has you covered.
All SafetyLink products undergo extensive

testing in a multitude of scenarios by
accredited testing facilities and comply to
current standards.
SafetyLink’s experienced technical team

is complemented with comprehensive
installation manuals and testing certificates.
We have national qualified installers keeping

your assets safe.
All products must be used within their

intended design only.
Ergonomically designed to be used as
Users must be trained and competent a single person fall protection device.
in the use of personal protection

A risk assessment and rescue

plan must be completed prior to
undertaking any tasks requiring the use
of this equipment.
1300 789 545
120
Anchors Lifelines Shuttles/Fittings X-Rail Roof Access Tools PPE SRL’s SafetyLink.com
121
SELF
RETRACTING
LIFELINES
SELF RETRACTING LIFELINES
Lightweight compact unit.

140kg user rating.
Clear durable housing for ease of unit inspection.
External shock pack with durable cover.
Aluminium connectors with 16kN gate strength.
Available in both Snap hook and Rebar/Scaffold hooks. SRL's
Innovative quick connector available on the twin lifelines,
allowing the users ease of connection.

AEROBLOC2M-SH-KB Self Retracting Lifeline: 2 metres with Snap Hook and Karabiner 1.40
AEROBLOC2M-SH-X2 Self Retracting Lifeline: 2 metres Twin with Snap Hook and Aero Connect 2.70
AEROBLOC2M-RH-KB Self Retracting Lifeline: 2 metres with Rebar/Scaffold Hook and Karabiner 1.80
AEROBLOC2M-RH-X2 Self Retracting Lifeline: 2 metres Twin with Rebar/Scaffold Hook and Aero Connect 3.60
1300 789 545
122
Anchors
AERO BLOC - SINGLE SELF RETRACTING LIFELINE WITH SNAP HOOK

Lifelines
PRODUCT CODE: AEROBLOC2M-SH-KB

AEROBLOC2M-SH-KB 2m SRL with Snap Hook and Karabiner Nylon/Alloy 1
Shuttles/Fittings
AERO BLOC - TWIN SELF RETRACTING LIFELINE WITH SNAP HOOK

Aero connect triple action dual leg bracket, joins twin legs.
X-Rail
PRODUCT CODE: AEROBLOC2M-SH-X2
AEROBLOC2M-SH-X2 2m Twin SRL with Snap Hook and Aero Connect Nylon/Alloy 1
Roof Access
AERO BLOC - SINGLE SELF RETRACTING LIFELINE WITH REBAR/SCAFFOLD HOOK

Tools
PRODUCT CODE: AEROBLOC2M-RH-KB

AEROBLOC2M-RH-KB 2m SRL with Rebar/Scaffold Hook and Karabiner Nylon/Alloy 1
PPE
AERO BLOC - TWIN SELF RETRACTING LIFELINE WITH REBAR/SCAFFOLD HOOK

SRL’s

Aero connect triple action dual leg bracket, joins twin legs.
SafetyLink.com
PRODUCT CODE: AEROBLOC2M-RH-X2

AEROBLOC2M-RH-X2 2m Twin SRL-Rebar/Scaffold Hook and Aero Connect Nylon/Alloy 1
123
Introducing the TUFF-BLOC, an exciting new addition to SafetyLink’s personal protection range. The
TUFF-BLOC features an energy absorbing over-mold design suitable for extreme environments. This
unique housing provides protection to the internal mechanisms and allows for easy storage when stacking.
Tough durable housing built for hard knocks.

140kg rated.
Built in fall indicator.
Side handle providing easy installation when holding up SRL for install.
Carry/storage clip.
Four different lengths 6, 10, 15 and 20 metres.
5 year service life*
Complies with EN360:2002 and AS/NZS 1891.3:2020.
*Service life may be less than 5 years due to harsh environments. ALL SRL’s should be inspected before and
after each use.

TUFF-BLOC006 Self Retracting Lfeline - 6 metres 4.5
1300 789 545
124
Anchors
TUFF-BLOC - 6 METRES

Easy storage when stacking.
Suitable for robust environments.
Lifelines
Rated for user’s up to 140kg.
Used for vertical or near vertical orientation.
PRODUCT CODE: TUFF-BLOC006

Shuttles/Fittings
TUFF-BLOC006 TUFF-BLOC 6M: Self Retracting Lifeline - 6 metres Nylon/Alloy 1

X-Rail
Roof Access

Tools

PPE
SRL’s

SafetyLink.com

125
APPENDIX 1 - CHEMICAL ADHESIVE
POSITIONING OF CONCRETE ANCHOR

The Concrete Anchor must be in a position easily and safely reached from a safe access point. Concrete anchor
should not be positioned close to an edge, minimum distance 150mm. Minimum concrete thickness 150mm.
LOCATING THE REINFORCING STEEL BAR (REO BAR) IN THE CONCRETE

Use Digital metal detector (Example: BOSCH DMO 10) to locate the Reo bar in the concrete when positioning the
Concrete Anchor. This ensures reo bars are avoided when drilling.
DRILLING THE HOLE

Drill a hole to a depth and width as suggested in table (opposite page).
PREPARING THE HOLE

The hole must be moisture and dust free. Remove dust using compressed air, small brush, and vacuum cleaner.
INSTALLING THE CONCRETE ANCHOR

Recommended chemical is Fischer FIS-V.
Prior to anchor installation, refer to installation procedure for individual anchor
product and check chemical is within expiry date.
DOWNLOAD
Partially used cartridges can be re-used by changing the mixing nozzle. CHEMICAL
1300 789 545
DATA SHEET
The entire surface of the anchors embedded section must be within the concrete
and shall use sufficient adhesive mortar as specified in table (opposite page).
126
Anchors
Components Description Qty
Lifelines
CON-CHEM-FISV.300.01 Injection Mortar FIS V Cartridge 300ml 1
CON-CHEM-FISMR Static Mixer FIS MR 2
Shuttles/Fittings
FIS V 300T: INJECTION MORTAR
ANCHOR DRILL HOLE DRILL HOLE MORTAR/ NO# OF FIXING/
APPLICATION
DIAMETER(mm) DIAMETER(mm) DEPTH(mm) FIXING(ml) CARTRIDGE
Concrete Insert 24 28 90 40 6
One Piece Eyebolt 16 18 90 15 18
WindowLink 53&25 55&28 20&122 60 4
SwiveLink 24 28 90 40 6
X-Rail
M10x130 Rod – Guardrail 10 12 95 8 35
M12x160 Rod – Tuff Post 12 14 115 10 28
M12x160 Rod – X-Rail 12 14 95 10 28
Roof Access
M16x130 Rod – DonutLink FrogLine 16 18 95 15 18
M16x160 Rod – Tuff Post 16 18 115 15 18
M16x200 Rod – Davit 16 18 140 16 15
CURING TIME FIS V
Cartridge Temperature Temperature at
Tools
Gelling Time Curing Time
(mortar) anchoring base
- 5⁰C - ± 0⁰C 24 hours

+ 0⁰C - + 5⁰C 13 minutes ± 0⁰C - + 5⁰C 3 hours
+ 5⁰C - + 10⁰C 9 minutes + 5⁰C - + 10⁰C 90 minutes PPE
+ 10⁰C - + 20⁰C 5 minutes + 10⁰C - + 20⁰C 60 minutes
SRL’s
The above times apply from the moment of contact between resin and hardener in the static mixer.
For installation, the cartridge temperature must be at least +5⁰C. For longer installation times, ie when interruptions
occur in work, the mixer should be replaced.
TESTING FOR CONCRETE MOUNTED ANCHOR

SafetyLink.com
To comply with current Standards each Concrete unit must be tested after installation. Allow required curing time
as specified in above table before testing. Test consists of pull out force to 50% of design load of anchorage. Note:
Drilled-in anchorages such as friction and glued-in anchorages shall be placed so that the shear load is at least twice
the tension load. For collared eyebolts this translates to a pull at an angle not exceeding 20 degrees to the surface in
which the bolt is installed.
127
APPENDIX 2 - CONCRETE PULL TESTING
To comply with current Standards, each Concrete anchor must be tested after installation and at every
recertification inspection.
Ensure you wait the recommended curing time as specified by the chemical manufacturer.
The pull test can be done using DonutLink washer as an attachment point.
Use the DonutLink Adapter with Hydrajaws pull tester to connect into DonutLink washer.
Test consists of proof loading to 50% of the intended anchor rating of 15kN.
Install the pull test Adapter with calibrated pull test device into DonutLink washer as shown in above image.
Load anchorage point to 7.5kN, refer pull test device instructions.
Ensure energy absorbing regions of the anchor system are not loaded during this test.
Check concrete and chemical adhesive as secure and damage free, refer to periodic inspections.
Note: Drilled-in anchorages such as friction and glued-in anchorages shall be placed so that the shear load is at
least twice the tension load. For FrogLine DonutLink components this translates to a pull at an angle not exceeding
20 degrees to the surface in which the bolt is installed.
Recommended chemical anchor: Fischer as per Fischer Product Supplement Data sheets (see Appendix 1).
DonutLink should not be positioned close to an edge, minimum distance 150mm.
If any doubt exists as to the strength of the structure an engineer should make the assessment.
During installation you must be safe at all times.
1300 789 545
CONCRETELINK DOWNLOAD CHEMICAL

INSTALLATION VIDEO DATA SHEET
128
Anchors
APPENDIX 3 - CABLE
Lifelines
Shuttles/Fittings
LIFELINE CABLE
7x7 wire rope 7x19 wire rope 1x19 wire rope
X-Rail
Roof Access
Standard Flexibility. High Flexibility. Limited Flexibility.
For use on all lifelines. For use on lifelines with short Suited to overhead lines.
intermediate intervals and multiple Makes for easy transitions over
corners. intermediates with SRL’s.
Tools
Not for use with Swageless Fittings.
LIFELINE CABLE PPE
Product Parts Description Qty Materials
STAT.CABLE001 Cable: 8mm dia, 7x7 wire rope Per metre 316 SS
SRL’s
STAT.CABLE001.01 Cable: 8mm dia, 7x7 wire rope 305m Roll 316 SS
STAT.CABLE001.02 Cable: 8mm dia, 7x7 wire rope 500m Roll 316 SS
STAT.CABLE_8mm_7x19_SS Cable: 8mm dia, 7x19 wire rope Per metre 316 SS
STAT.CABLE_8mm_1x19_SS Cable: 8mm dia, 1x19 wire rope (DO NOT USE WITH SWAGELESS FITTINGS) Per metre 316 SS
SafetyLink.com
129
‘Innovative
Fall Protection’
© 2018, SafetyLink Pty Ltd, Australia.

Patents : SafetyLink Pty Ltd has a
multitude of patents, patents pending,
design applications, trademarks and
copyrighted documents both lodged
and issued.
Should you wish to know the progress
SafetyLink Terms and Conditions
of our intellectual property on a
specific product please email us on
info@safetylink.com and quote the
product code.
1300 789 545
Safety Centre Online Training

130
Anchors
Lifelines
Shuttles/Fittings
X-Rail
Roof Access
Tools
PPE
EXPERT FALL PROTECTION PLANNING
SafetyLink’s design and planning team are here to help work out the positioning of your fall protection
system. Ensuring all areas of your roof are accessed safely.
SRL’s
Things to consider when planning your roof layout:

Are all areas of your roof protected, allowing complete access when working at heights?
Are you protected from the ground up, allowing complete access to your roof?
Detailed comprehensive documentation provided.
Contact our design team at info@safetylink.com and we can plan your fall arrest system for you.
SafetyLink.com
131
WARNINGS
READ CAREFULLY SOMEONE'S LIFE DEPENDS ON IT
ALL HEIGHT SAFETY SYSTEMS MUST BE INSPECTED EVERY 12 MONTHS, inspections need to be carried out by a
competent height safety installer. The system also needs to be re-certified by a height safety equipment inspector where the
systems original date of installation exceeds 10 years, and every subsequent 5 years after that.
SAFETYLINK ANCHORAGES AND LIFELINES

The building or structure for the anchorages should be assessed by an engineer, unless it is clear to a competent height
safety installer that the structure is adequate.
SafetyLink Height Safety Systems must only be installed as per our installation guides, to structures as specified in the
installation manual for each product.
All safety procedures must be complied with in accordance with the current safety code(s) of practice(s) for working
at heights. Ensure safety at all times by being attached to suitable anchor points and approved safety equipment or
approved scaffolding.
Installation is to be carried out by, or under the supervision of a competent height safety installer.
To prevent galling of non-permanent or adjustable stainless steel components use nickel anti-seize or similar boundary
layer lubricant.
Recommended waterproofing for roof tiles: Sika Flex Co-Polymer Sealant.
Recommended waterproofing for metal roof: Silicone Sealant Neutral Cure.
Recommended chemical is Fischer FIS-V. Prior to anchor installation, refer to installation procedure for individual anchor
product and check chemical is within expiry date. The injection cartridge is for use with a standard caulking gun. Partially
used cartridges can be re-used by changing the mixing nozzle. The entire surface of the anchors embedded section
must be within the concrete and shall use sufficient adhesive gel as specified in the table on APPENDIX 1.
A personal energy absorber or a fall-arrest device with a personal energy absorber must be used in conjunction with all
SafetyLink Anchorages and Lifeline systems.
SAFETYLINK ANCHORAGES
Standard Eyebolts must only be used as a fall arrest anchor.
Abseiling Eyebolts are to be used for rope access (abseiling).
Retro Eyebolts used for rope access (abseiling) except on roof sheet high profile section.
Standard & Abseiling Eyebolts - Threads need to have a minimum of SIX FULL 360º TURNS into the ultimate thread.
Retro Eyebolts - Threads need to have a minimum of EIGHT FULL 360º TURNS into the ultimate thread.
Maximum user per SafetyLink Anchors is one (1).
SAFETYLINK LIFELINES
Install SafetyLink horizontal lifeline systems on roof pitches no greater than 15 degrees and across roof pitches no
greater than 25 degrees.
Maximum number of users per system is four (4).
Maximum number of users per span is two (2).
Refer to system information for site specific use.
IN ADDITION TO SAFETYLINK PTY LTD EQUIPMENT, ALL ANCILLARY EQUIPMENT MUST BE

INSPECTED IN ACCORDANCE WITH APPLICABLE REGULATORY REQUIREMENTS AND THE
MANUFACTURER’S INSTRUCTIONS. FOR MAINTENANCE ADVICE AND SERVICES PLEASE
CONTACT SAFETYLINK ON +61 249 641068 FOR YOUR NEAREST SAFETYLINK INSPECTION
1300 789 545
SERVICE CENTRE OR EMAIL: info@safetylink.com
132
Anchors
MAINTENANCE - PERIODIC INSPECTIONS
All items of height safety equipment which are in regular use shall be subjected to periodic inspection and servicing.
These regular scheduled inspections and servicing must be carried out by a competent height safety installer.
Lifelines
ALL HEIGHT SAFETY SYSTEMS MUST BE INSPECTED EVERY 12 MONTHS, inspections need to be carried out by a competent
height safety installer. The system also needs to be re-certified by a height safety equipment inspector where the systems original
date of installation exceeds 10 years, and every subsequent 5 years after that.
FIXED LADDERLINK: LADDER SUPPORT BRACKET
Shuttles/Fittings
Procedures to be followed at inspection time:
Visually inspect ladder support brackets for any signs of deterioration or the protective coating being removed. (Note:
LadderLink is made from marine grade aluminium and therefore should not corrode).
Ensure LadderLink is firmly secured to the structure as per SafetyLink Installation Handbook. (refer to installing LadderLink).
SAFETYLINK ANCHORAGES AND LIFELINES

Procedures to be followed at inspection time:
Visually inspect anchors for signs of deterioration.
Visually inspect the components of the anchor for corrosion, superficial surface marking is permitted while deeper corrosion or
pitting would require attention.
Manually (by hand) check the eyebolt for rigidity and tightness, if the eyebolt can turn in the anticlockwise direction it will require
X-Rail
attention.
Visually inspect the attachment component of the anchorage where practically possible.
Visually inspect the parent structure for modifications or deterioration which might lead to loss of anchorage strength.
For Concrete Installation Only: To comply with Australian Standards, each ConcreteLink must be tested after installation and at
every recertification inspection. Ensure you wait the recommended curing time as specified by the chemical anchor instructions.
Roof Access
The pull test can be done using a 16mm threaded eyebolt. Test consists of ultimate pull out force proof loading to 50% of
design purpose of anchorage.
A personal energy absorber or a fall-arrest device with a personal energy absorber must be used in conjunction with all
SafetyLink Anchorages and Lifeline systems.
SAFETYLINK ANCHORAGES
The FrogLink/TileLink anchor point has two energy absorbing regions and two stabilising joins which hold the eyelet in place
during use. If these energy absorbing regions are expanded this will indicate the anchor point has arrested a fall. Similarly, if the
Tools
two stabilising joins have been broken this would also indicate the FrogLink/TileLink has arrested a fall and should be replaced.
The eyebolt should remain straight, a bent eyebolt will indicate that the anchor point has arrested a fall (The design features of
the eyebolt includes the ability to bend like a fishing pole starting from the top and working its way to the bottom, enabling it to
use up energy as the eyebolt bends whilst lessening the force on the person falling and the attachment point).
Visually inspect the rubber hat washer and waterproofing components to ensure it has remained sealed.
PPE
SAFETYLINK LIFELINES
The FrogLine End, Intermediate and Corner anchor points have energy absorbing regions and stabilising joins. If these energy
absorbing regions are expanded this will indicate the anchor point has arrested a fall and should be replaced. Similarly, if the
stabilising joins have been broken this would also indicate the anchor point has arrested a fall and should be replaced. (The
design features of the FrogLine’s curved profile provides the initial shock absorbing capabilities in the event of a fall. Further
SRL’s
extension is provided in the serpentine shapes which progressively dissipate and absorb energy whilst retaining their strength.
This lessens the force on the person falling and the structure the anchor is attached to).
Manually (by hand) check the 16mm bolt securing the FrogLine Bases for rigidity and tightness. If the Bolt can turn in the
anticlockwise direction it will require attention.
Check the full length of the stainless steel cable for any evidence of wear, cuts, looseness, extension, inter-strand wear,
corrosion, stiffness, brittleness or fraying.
SafetyLink.com
Check the integrity of cable terminations and that lifeline tensioners are correctly adjusted (80kg/0.8kN/800N) and lock nuts are
tensioned correctly.
Check for the presence of contaminants or exposure to corrosive or extreme environment signs may include discoloration,
crystalling or oxidation. These could significantly reduce the safe working load of the Lifeline.
Run the FrogLine Shuttle along the full length of the life line to verify its correct function.
133
Quality Assurance
Notes
1300 789 545
134
Training
Anchors
Lifelines
Steps to becoming a qualified SafetyLink product installer
1
Each user must have their
Accreditation
Shuttles/Fittings
Working at Heights accreditation
(RIIWHS204D).
The requirements for installation of any fall protection equipment is to be a competent person. The
definition of this is someone with suitable skills, knowledge, experience and training in the height safety
industry. In order for you to work at heights you must complete a working at heights accreditation.
Contact your local training centre.
Each user/business entity
2 Insurance
must have correct insurance
for installing height safety
X-Rail
equipment.
Certification and annual recertification may have an effect on your Public and Products Liability Insurance.
Engaging in these activities may also require you to take out or amend your existing Professional
Indemnity Insurance. Because policies vary between insurers it is best you speak to your insurance
advisor to ensure your coverage will include these activities.
Roof Access
3
Each user must complete and
Product Training pass each course for the product
they are purchasing/installing.
SafetyLink’s online training portal (Safety Centre) provides online courses on SafetyLink Anchors. Register
yourself for free on SafetyLink’s website www.safetylink.com/safetycentre. After completing and passing
the product course you will receive a certificate to download and provide to your customer. Certificates
are valid for 2 years. Personal training is required for installing lifelines, contact SafetyLink.
Tools
4
Issue a certificate for height
Certification safety system certification upon
completion of the project.
PPE
On completion you should supply certification documents with site layout plan, training certificates,
product checklist and manuals to the end user. You should also discuss the wording of any proposed
certification with your relevant insurer and legal adviser to ensure you are covered in the event of a claim.
Scan QR Code to
SRL’s
register online
for training
SafetyLink.com
SafetyLink Pty Ltd 1300 789 545

+61 2 4964 1068 info@safetylink.com
Contact SafetyLink for your closest distributor. www.safetylink.com
135
INNOVATIVE FALL PROTECTION
Asia-Pacific/The Americas
info@safetylink.com
1300 789 545 | +61 (0)2 4964 1068
Europe/Africa/Middle East
europe.sales@safetylink.com
Northern Europe
uk.sales@safetylink.com
www.safetylink.com

Saftlank

Uploaded by

Copyright:

Available Formats

Saftlank

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Saftlank

Uploaded by

Copyright:

Available Formats

2021

Clamp Mounted FrogLine 66

PERSONAL PROTECTIVE EQUIPMENT 116

SELF RETRACTING LIFELINES 120

Concrete Adhesive - Data Sheet 126

Energy Absorbing Anchors working continuously creating a multitude of new

working at heights From a series of anchor points to a complete network

Roof Anchor Layout Video

Extensive technical support with collectively over 100 years

Benefits of choosing SafetyLink:

therefore the direction of your fall cannot be accurately predicted.

 SafetyLink’s concrete mounted anchors are an

 The Standard Eyebolt is designed for fall arrest

 Where a low profile design is more desirable a

 To comply with current Standards each concrete

CONCRETE MOUNTED ANCHORS

Product Code Description Weight (kg)

RECOMMENDED TOOLS FOR INSTALLATION

Product Code Description Page

 ConcreteLink can be ordered with Standard or Abseil Eyebolt. The Standard

PRODUCT CODE: CONCL001 (Advise Standard or Abseil Eyebolt)

Components Description Material Qty

ConcreteLink Anchor with Collared Eyebolt FALL ARREST & ABSEIL

PRODUCT CODE: CONCL002

Components Description Material Qty

ConcreteLink One Piece Unit FALL ARREST & ABSEIL

PRODUCT CODE: CONCL005

Concrete Brass Bolt

PRODUCT CODE: CONCL006

Components Description Material Qty

 SafetyLink’s patented WindowLink anchor

 The WindowLink can be placed outside or

 Both the WindowLink and SwiveLink are ANCHORS

 To comply with current Standards each

Chemical Adhesive Installation Manual

CONCRETE WALL/FLOOR MOUNTED ANCHORS

Product Code Description Weight (kg)

RECOMMENDED TOOLS FOR INSTALLATION

Product Code Description Page

PRODUCT CODE: WINDW001

Components Description Material Qty

PRODUCT CODE: SWIVL002

Components Description Material Qty

TUFF-BRACKET Concrete Wall Mounted Anchor FALL ARREST & ABSEIL

TUFF-BRACKET Concrete Wall Mounted Anchor FALL ARREST & ABSEIL

Components Description Material Qty

 TUFF-POST is designed to raise the height of

 TUFF-POST is a sealed unit made entirely from

 Concrete Anchors must be chemically fastened.

CONCRETE MOUNTED TUFF-POST ANCHORS

Product Code Description Weight (kg)

RECOMMENDED TOOLS FOR INSTALLATION

Product Code Description Page

 TUFF-POST 150 system is raised 150mm off the concrete.

PRODUCT CODE: TUFF-POST150R-C-RET

 TUFF-POST 300 system is raised 300mm off the concrete.

 TUFF-POST 300 system is raised 300mm off the concrete.

PRODUCT CODE: TUFF-POST300R-C-COL

EYEBOLT M16x26mm Collared Eyebolt: M16x26mm 316SS 1

 TUFF-POST is designed to raise the height of

SafetyLink’s concrete mounted anchors are an

The Standard Eyebolt is designed for fall arrest

Where a low profile design is more desirable a

To comply with current Standards each concrete

ConcreteLink can be ordered with Standard or Abseil Eyebolt. The Standard

SafetyLink’s patented WindowLink anchor

The WindowLink can be placed outside or

Both the WindowLink and SwiveLink are ANCHORS

To comply with current Standards each

TUFF-POST is designed to raise the height of

TUFF-POST is a sealed unit made entirely from

Concrete Anchors must be chemically fastened.

TUFF-POST 150 system is raised 150mm off the concrete.

TUFF-POST 300 system is raised 300mm off the concrete.

TUFF-POST 300 system is raised 300mm off the concrete.

TUFF-POST is designed to raise the height of

TUFF-POST is a sealed unit made entirely from

Concrete Anchors must be chemically fastened.

TUFF-POST 600 system is raised 600mm off the concrete.

TUFF-POST 600 system is raised 600mm off the concrete.

TUFF-POST 900 system is raised 900mm off the concrete.

TUFF-POST 900 system is raised 900mm off the concrete.

Single person anchor.

SafetyLink’s team designed the TileLink roof anchor

The TileLink fits between the existing tiles ensuring

The RafterLink and HingeLink units include

Abseil Eyebolt can be adapted to the

The RetroLink anchor points are designed for use

Easy installation into concealed areas.

RetroLink installed onto the raised section of roof

SwiveLink anchor point is used in steel column structures.

Eyelet 28mm ID.

TUFF-POST is designed to raise the height of

TUFF-POST 300 system is raised 300mm off the steel structure.