LUIS ERNESTO ROJAS AVILA

General Manager of COFOCE

For the last 20 years, the state of Guanajuato in Central Mexico We believe that the way to maintain and increase the
has been exponentially growing and leading the automotive competitiveness in the automotive industry is trough innovation.
industry in North America. In order to do so, the state of Guanajuato fosters eight innovation
parks supported by a strong network of universities and research
The region has important competitive edges that cannot institutions to offer a higher added value to the logistics,
be found anywhere else, its strategic location has been an manufacturing and industrial supply chain.
important factor to attract important investments.
Guanajuato’s Trade Commission (COFOCE) in alliance with the
Guanajuato is the only Mexican state to have 5 assembly plants: Guanajuato Automotive Cluster (CLAUGTO) has developed the
General Motors, Mazda, Honda, Toyota and Hino Motors; GTO-AUTOMOTIVE program, whose mission is to place the
furthermore it hosts important OEM’s such as Volkswagen and automotive industry of Guanajuato, as an international-strategic
Ford Motor Company and top suppliers as: American Axle, center of reliable supply chain.
Continental, Denso, Faurecia, GKN, Grupo Antolin, Hella, KYB,
Magna, Michelin, among others. This publication is a reference guide to find the right partner for
your business and hopes to draw attention to Guanajuato and
These companies and a network of over 500 auto parts component Mexico as a region for such innovative companies.
suppliers form a consolidated automotive cluster with dynamic
growth, experience and a strong-export orientation, sending abroad
80% of its production to more than 60 countries, which confirms
the capability of meeting the most demanding requirements.
 ROLANDO ALANIZ
President of CLAUGTO

In North America, the automotive sector is one of the stepping The big opportunities that our state offers rely on the correct
stones of direct foreign investments; among the states in application of the new rules of origin in the USMCA, pushing
the region, Guanajuato is the fifth recipient of this kind of regional content from 62.5% to 75% to remain tax free.
investments, with 2.831 billion dollars in the last two decades.
The Guanajuato Automotive Cluster has identified 3,200
Guanajuato is without a doubt, a land of opportunities, in which MSMEs in the state value chain, which have managed to be
the arrival of companies and suppliers remains a huge source of part of this success story thanks to their solid experience and
new jobs that promise a better quality of life and a bright future importance as a source of work and income for thousands of
for workers and their families. families, engineers, graduates and technicians.

Today, the automotive industry is facing a total transformation, CLAUGTO will keep working and multiplying our efforts along
and all the companies that integrate this great industry should our associates to develop our Strategic Agenda, surpass the
be aligned with the changes that are to come, that’s why, existing challenges and keep Guanajuato as Mexico’s leader in
CLAUGTO A.C., along with the Government of Guanajuato, are investments and development of local suppliers. We will keep
and will remain in line with the needs of the industry for today our place as the most dynamic automotive cluster in North
and the future. America!

Currently, CLAUGTO has more than 100 company members

and our Consultative Council reunites the six automotive OEMs
in the state: Toyota, General Motors, Volkswagen, Mazda,
Honda and Ford.
DISCLAIMER
COFOCE does not guarantee the usefulness of the Catalog for
any particular activity or applicability of its content and services
for particular purposes, so the use of the information, content and
services are under the sole responsibility of the user.

The contents included in the Catalog are provided under good faith
by COFOCE with information from both internal and external sources.
Due of this conjuncture and the large amount of information made
available to the user through the Catalog, COFOCE cannot guarantee
the reliability, permissibility, accuracy and updating of it, although use
its best procurement efforts.

COFOCE also excludes any liability arising from the provision of

services or provision of products and/or services that may be acquired
or contracted to third parties through the Catalog.
 Pag. 88 POLIMEROS Y DERIVADOS
GENERAL INDEX Pag. 89 PYA
Pag. 90 RELATS
Pag. 91 R-F HOODS
Pag. 2 Message from Luis Ernersto Rojas Ávila, General Manager of COFOCE
Pag. 92 ROCAND
Pag. 3 Message from Rolando Alaniz, President of CLAUGTO
Pag. 93 SAMOT
Pag. 4 General Index
Pag. 94 SANNOHASHI
Pag. 6 OEM Index by segment
Pag. 95 SCHERDEL
Pag. 8 Alphabetical Index
Pag. 96 SCHIMMEL

Pag. 97 SEKISUI
Pag. 98 SIIOSA
Pag. 24 Automotive Sector in Mexico
Pag. 99 SK TEC
Pag. 25 TOP 10 Vehicle Producing Countries in 2021
Pag. 100 SOLDER
Pag. 26 Market Share of Vehicles Sales in The U.S. by Country of Origin
Pag. 101 SULASTIC
Pag. 27 Light-vehicle plant’s location in Mexico
Pag. 102 TEKFOR
Pag. 28 Heavy-vehicle plant’s location in Mexico
Pag. 103 TEKNOLINEA
Pag. 29 Annual Mexico Vechicle Production /
Pag. 104 TEMAPLAX
Top largest car exporting countries by units
Pag. 105 TEXPROTEC
Pag. 30 Auto parts Sector in Mexico
Pag. 106 TEXTILES LEÓN
Pag. 31 Origin of the auto parts manufactures located in Mexico
Pag. 107 TOYOTETSU
Pag. 32 Historial and forecast of auto parts production in Mexico
Pag. 108 TQ1
Pag. 33 Mexican Exports & Imports of auto parts by country /
Pag. 109 VCST
Main autoparts exported by Mexico
Pag. 110 VISTAMEX
Pag. 34 Automotive Sector in Guanajuato
Pag. 111 VULCAN
Pag. 35 Exports in Guanajuato Vehicles / Autoparts
Pag. 112 WEWIRE
Pag. 36 Guanajuato Autoparts Exports by USMCA category
Pag. 113 WITZENMANN
Pag. 37 Auto parts exporting cities in the State of Guanajuato
Pag. 114 WURTH
Pag. 38 GTO Export Platform

DIRECT SUPPLIERS INDIRECT SUPPLIERS

Pag. 42 212 INDUSTRIAL Pag. 116 ACARMA
Pag. 43 APG Pag. 117 ADILUB
Pag. 44 ARBOMEX Pag. 118 AJR
Pag. 46 ARYPSA Pag. 119 BOREAL
Pag. 47 ATG Pag. 120 CAPRICORNIO
Pag. 48 AUTO PLASTEK Pag. 121 DIMACO
Pag. 49 AZPIARAN Pag. 122 EKO EMPAQUES
Pag. 50 CENTRACORE Pag. 123 ELFER
Pag. 51 COMANHI Pag. 124 EMPROPACK
Pag. 52 CONSMART Pag. 125 FORTIPAK
Pag. 53 CONTOUR HARDENING Pag. 126 GISHNER
Pag. 54 COTROMMA Pag. 127 GPA AZIMATRONICS
Pag. 55 DC GASKETS Pag. 128 GPA GRUPO PLASMA AUTOMATION
Pag. 56 DEACERO Pag. 129 GPA INDUSTRIAS PLASMA CUT
Pag. 57 DEALBA Pag. 130 GPA PLASTMA TOOLING
Pag. 58 DISEÑO CENTRAL Pag. 131 GRAMO INDUSTRIAL
Pag. 59 DISPPLE Pag. 132 GRUPO INDUSTRIAL PUERTO
Pag. 60 ECENARRO Pag. 133 GTO TOOLING
Pag. 61 ELAY
Pag. 134 GT STEEL
Pag. 62 ESTAMP
Pag. 135 HERRAMENTALES PRESS
Pag. 63 FRANKISCHE
Pag. 136 HIPERPACK
Pag. 64 FURUKAWA
Pag. 137 INEMEX
Pag. 65 GOBAR
Pag. 138 INMEKHA
Pag. 66 HONDA LOCK
Pag. 67 INALFA ROOF SYSTEMS Pag. 139 MEXIPACK
Pag. 68 KAMAX Pag. 140 NOVATEC PAGANI
Pag. 69 LTC ROLL Pag. 141 NUFER PLUS
Pag. 70 MACAUTO Pag. 142 ORBINGENIERIA
Pag. 71 MAQUITEC Pag. 143 SIMSA
Pag. 72 MARQUARDT Pag. 144 SONDERN
Pag. 73 MECANOMATIC Pag. 145 TIERRA TECH
Pag. 74 MEFRUP Pag. 146 UTZ
Pag. 75 METAGRA Pag. 147 WORLD WIDE FOAM
Pag. 76 MEXICANA DE PIEZAS PLASTICAS
Pag. 77 MINAMIDA
Pag. 78 MITSUI SERVICES SUPPLIERS
Pag. 79 MOTUS
Pag. 80 MPE Pag. 150 INSUMA QUALITY
Pag. 81 MURTRA Pag. 151 MONITOR
Pag. 82 MYPI
Pag. 83 NOVATEC LEON
Pag. 84 OGAWA
Pag. 85 OSCA-ARCOSA
Pag. 86 OVV
Pag. 87 PANELFISA
 OEM INDEX
ELECTRIC & ELECTRONICS BENDING
Pag. 64 FURUKAWA Pag. 46 ARYPSA
Pag. 72 MARQUARDT Pag. 119 BOREAL

BY SEGMENT
Pag. 85 OSCA-ARCOSA Pag. 121 DIMACO
Pag. 112 WEWIRE Pag. 58 DISEÑO CENTRAL
Pag. 114 WÜRTH ELECTRONIC Pag. 59 DISPPLE
Pag. 128 GPA GRUPO PLASMA AUTOMATION
ENGINE Pag. 134 GT STEEL
Pag. 98 SIIOSA
Pag. 44 ARBOMEX
Pag. 50 CENTRACORE
Pag. 55 DC GASKETS CASTING
Pag. 62 ESTAMP
Pag. 63 FRANKISCHE Pag. 44 ARBOMEX
Pag. 90 RELATS Pag. 52 CONSMART
Pag. 93 SAMOT
Pag. 102 TEKFOR CUTTING
Pag. 109 VCST
Pag. 113 WITZENMANN Pag. 46 ARYPSA
Pag. 119 BOREAL
INTERIORS Pag. 121 DIMACO
Pag. 59 DISPPLE
Pag. 48 AUTO PLASTEK Pag. 132 GIP
Pag. 58 DISEÑO CENTRAL Pag. 128 GPA GRUPO PLASMA AUTOMATION
Pag. 69 LTC ROLL Pag. 134 GT STEEL
Pag. 70 MACAUTO Pag. 98 SIIOSA
Pag. 79 MOTUS
Pag. 143 SIMSA
Pag. 81 MURTRA
Pag. 83 NOVATEC LEON
Pag. 86 OVV DIE CASTING
Pag. 88 POLIMEROS Y DERIVADOS
Pag. 89 PYA AUTOMOTIVE Pag. 45 ARBOMEX
Pag. 100 SOLDER Pag. 50 CENTRACORE
Pag. 104 TEMAPLAX Pag. 66 HONDA LOCK
Pag. 106 TEXTILES LEON
Pag. 108 TQ1 FINE BLANKING
Pag. 110 VISTAMEX
Pag. 147 WORLDWIDE FOAM Pag. 61 ELAY

RAW MATERIALS FORGING

DIRECT SUPPLIERS
Pag. 56 DEACERO Pag. 60 ECENARRO
AXLE/BRAKE/BODY CONTROL Pag. 68 KAMAX
STANDARD PARTS Pag. 75 METAGRA
Pag. 44 ARBOMEX Pag. 77 MINAMIDA
Pag. 89 PYA AUTOMOTIVE Pag. 51 COMANHI Pag. 84 OGAWA
Pag. 90 RELATS Pag. 56 DEACERO Pag. 102 TEKFOR
Pag. 93 SAMOT Pag. 57 DEALBA
Pag. 107 TOYOTETSU Pag. 58 DISEÑO CENTRAL MACHINING
Pag. 109 VCST Pag. 60 ECENARRO
Pag. 61 ELAY Pag. 42 212 INDUSTRIAL
Pag. 68 KAMAX Pag. 118 AJR
BODY AND EXTERIOR
Pag. 75 METAGRA Pag. 44 ARBOMEX
Pag. 84 OGAWA Pag. 47 ATG
Pag. 48 AUTO PLASTEK Pag. 50 CENTRACORE
Pag. 66 HONDA LOCK Pag. 87 PANELFISA
Pag. 54 COTROMMA
Pag. 67 INALFA ROOF SYSTEMS Pag. 94 SANNOHASHI
Pag. 121 DIMACO
Pag. 69 LTC ROLL Pag. 95 SCHERDEL Pag. 59 DISPPLE
Pag. 78 MITSUI Pag. 132 GIP
Pag. 79 MOTUS SUSPENSION/STEERING/WHEEL & TIRE Pag. 130 GPA PLASMATOOLING
Pag. 89 PYA AUTOMOTIVE Pag. 131 GRAMO INDUSTRIAL
Pag. 100 SOLDER Pag. 44 ARBOMEX Pag. 134 GT STEEL
Pag. 107 TOYOTETSU Pag. 80 MPE Pag. 71 MAQUITEC
Pag. 110 VISTAMEX Pag. 85 OSCA ARCOSA Pag. 73 MECANOMATIC
Pag. 89 PYA AUTOMOTIVE Pag. 74 MEFRUP
CHASSIS Pag. 93 SAMOT Pag. 77 MINAMIDA
Pag. 94 SANNOHASHI Pag. 84 OGAWA
Pag. 49 AZPIARAN Pag. 101 SULASTIC Pag. 93 SAMOT
Pag. 50 CENTRACORE Pag. 107 TOYOTETSU Pag. 143 SIMSA
Pag. 110 VISTAMEX Pag. 98 SIIOSA
Pag. 144 SONDERN
DRIVE TRAIN
Pag. 101 SULASTIC
Pag. 49 AZPIARAN MANUFACTURING Pag. 102 TEKFOR
Pag. 50 CENTRACORE PROCESSES SUPPLIERS
Pag. 63 FRANKISCHE ROLLING
Pag. 80 MPE
Pag. 89 PYA AUTOMOTIVE
Pag. 102 TEKFOR
METAL FORMING Pag. 59 DISPPLE
Pag. 134 GT STEEL
Pag. 105 TEXPROTEC Pag. 69 LTC ROLL
ADDITIVE MANUFACTURING
Pag. 107 TOYOTETSU
Pag. 44 ARBOMEX
Pag. 47 ATG
 STAMPING SILICON PARTS: TOOLING

Pag. 49 AZPIARAN Pag. 118 AJR

Pag. 52 CONSMART Pag. 76 MEXICANA DE PIEZAS PLASTICAS Pag. 44 ARBOMEX
Pag. 65 GOBAR SYSTEMS Pag. 111 VULCAN Pag. 54 COTROMMA
Pag. 69 LTC ROLL Pag. 127 GPA AZIMATRONICS
Pag. 78 MITSUI Pag. 133 GTO TOOLING
Pag. 99 SK TEC SURFACE / HEAT TREATMENT: Pag. 135 HERRAMENTALES PRESS
Pag. 103 TEKNOLINEA Pag. 144 SONDERN
Pag. 107 TOYOTETSU HEAT TREATMENT
PACKAGING
WELDING Pag. 53 CONTOUR HARDENING
Pag. 57 DEALBA Pag. 122 EKO EMPAQUES
Pag. 43 APG
Pag. 68 KAMAX Pag. 124 EMPROPACK
Pag. 46 ARYPSA
Pag. 119 BOREAL Pag. 125 FORTIPAK
Pag. 54 COTROMMA PAINT COATING Pag. 136 HIPERPACK
Pag. 121 DIMACO Pag. 137 INEMEX
Pag. 58 DISEÑO CENTRAL Pag. 42 212 INDUSTRIAL
Pag. 139 MEXIPACK
Pag. 59 DISPPLE Pag. 116 ACARMA
Pag. 119 BOREAL Pag. 140 NOVATEC PAGANI
Pag. 132 GIP
Pag. 128 GPA GRUPO PLASMA AUTOMATION Pag. 121 DIMACO Pag. 86 OVV
Pag. 131 GRAMO INDUSTRIAL Pag. 58 DISEÑO CENTRAL Pag. 89 PYA AUTOMOTIVE
Pag. 134 GT STEEL Pag. 59 DISPPLE Pag. 97 SEKISUI
Pag. 133 GT TOOLING Pag. 128 GPA GRUPO PLASMA AUTOMATION Pag. 146 UTZ
Pag. 98 SIIOSA Pag. 134 GT STEEL Pag. 147 WORLDWIDE FOAM
Pag. 143 SIMSA Pag. 66 HONDA LOCK
Pag. 99 SK TEC Pag. 98 SIIOSA OTHERS
Pag. 107 TOYOTETSU Pag. 100 SOLDER
Pag. 103 TEKNOLINEA
Pag. 120 CAPRICORNIO
Pag. 142 ORBINGENIERIA
PLATING
PLASTIC MOLDING: Pag. 145 TIERRA TECH
Pag. 116 ACARMA
BLOW MOLDING SERVICES INDEX
Pag. 80 MPE
Pag. 92 ROCAND INDIRECT SUPPLIERS Pag. 150 INSUMA QUALITY
Pag. 151 MONITOR
FOAMING AUTOMATION
Pag. 97 SEKISUI
AFTERMARKET INDEX
Pag. 132 GIP
Pag. 147 WORLDWIDE FOAM Pag. 126 GISHNER Pag. 117 ADILUB
Pag. 127 GPA AZIMATRONICS Pag. 44 ARBOMEX
PLASTIC INJECTION MOLDING Pag. 131 GRAMO INDUSTRIAL
Pag. 133 GTO TOOLING Pag. 55 DC GASKETS
Pag. 43 APG Pag. 144 SONDERN Pag. 81 MURTRA
Pag. 48 AUTO PLASTEK Pag. 85 OSCA-ARCOSA
Pag. 65 GOBAR SYSTEMS CHEMICAL Pag. 91 RF HOODS
Pag. 66 HONDA LOCK Pag. 100 SOLDER
Pag. 71 MAQUITEC Pag. 117 ADILUB Pag. 101 SULASTIC
Pag. 76 MEXICANA DE PIEZAS PLASTICAS Pag. 141 NUFER PLUS
Pag. 78 MITSUI
Pag. 80 MPE Pag. 100 SOLDER
Pag. 82 MYPI
Pag. 83 NOVATEC LEON GAUGES
Pag. 89 PYA AUTOMOTIVE
Pag. 92 ROCAND Pag. 118 AJR
Pag. 96 SCHIMMEL Pag. 129 GPA INDUSTRIAS PLASMA CUT
Pag. 104 TEMAPLAX Pag. 144 SONDERN
Pag. 110 VISTAMEX
Pag. 111 VULCAN MATERIAL HANDLING
Pag. 112 WEWIRE
Pag. 120 CAPRICORNIO
RUBBER PARTS: Pag. 52 CONSMART
Pag. 121 DIMACO
RUBBER-METAL PARTS Pag. 123 ELFER
Pag. 132 GIP
Pag. 76 MEXICANA DE PIEZAS PLASTICAS Pag. 129 GPA INDUSTRIAS PLASMA CUT
Pag. 101 SULASTIC Pag. 134 GT STEEL
Pag. 138 INMEKHA

RUBBER PRODUCTS MOLDING

Pag. 74 MEFRUP Pag. 48 AUTO PLASTEK
Pag. 76 MEXICANA DE PIEZAS PLASTICAS Pag. 135 HERRAMENTALES PRESS
Pag. 89 PYA Pag. 71 MAQUITEC
Pag. 82 MYPI
Pag. 92 ROCAND
Pag. 96 SCHIMMEL
ALPHABETICAL
INDEX
pag. 42
# AMTB SUMMIT S DE RL DE CV
usa.arcelormittal.com
Laser welded steel sheet, cut sheet
212 INDUSTRIAL
Machining and other innovative applications like pour-on polyurethane Shore A and Teflon ANA DE MEXICO SA DE CV
www.anaglb.com
4G INGENIERÍA SA DE CV Metal and plastic components for interiors
www.4gingenieria.com
Racks, containers, dollies ANDERSON-COOK DE IRAPUATO S DE RL DE CV
www.andersoncook.com
Metal and plastic parts for interiors and transmissions

A ANDROID DE MEXICO S DE RL DE CV
www.android-ind.com
ACABADOS ARELLANO MARTÍNEZ, SA DE CV Complex assembly, tooling and equipment solutions
pag. 116

www.acabadosarellano.com
Electrolytic coating processes APC MANUFACTURING, S DE RL DE CV
www.apcmfg.net
ACOPOL SA DE CV Harnesses
www.acopol.com.mx
Synthetic leather
APG MEXICO AUTOMOTIVE PLASTICS GROUP MEXICO S.A DE C.V.

pag. 43
www.apagmexico.mx
ACOUST-A-FIBER
Thermoplastic injection molding of various components and assembles, wheel liners, grilles & exterior trim.
www.mwaaf.com
Sound Deadening and Acoustical Insulators, Heat Shield Products

pag. 44-45
ARBOMEX SA DE CV
ADAC STRATTEC DE MEXICO www.arbomex.com
www.strattec.com Camshafts, balance shafts, cylinder sleeves, water pumps, axle sleeves, differential carriers
Paint and Assembly of Door Handles
ARKAL AUTOMOTIVE SA DE CV
ADILUB SA DE CV www.arkal-automotive.com
pag. 117

www.adilub.com.mx Dedicated to plastic injection of PP/PA combined with glass fibers

Lubricants
ARNESES ELECTRICOS AUTOMOTRICES SA DE CV
AIREQUIPOS DEL CENTRO SA DE CV www.condumexarneses.com.mx
www.airequiposdelcentro.com Electrical harnesses
Air compressors
ARNESES Y CONEXIONES SA DE CV (OSCA-ARCOSA)

pag. 85
AISIN GROUP www.osca-arcosa.com
www.aisin.com Harnesses
Drivetrain, body, brake & chassis, engine and related products
ARTECOLA MEXICO SA DE CV
AJR MACHINE TOOLS, SA DE CV www.artecola.com.mx
pag. 118

www.ajr.mx Plastic substitutes (natural fibers) for interiors

Clamping cuts, erosion cut, gauges and fixtures
ARVIN SANGO
AKEBONO BRAKE MEXICO SA DE CV www.arvinsango.com
www.akebonobrakes.com Exhaust Systems, Catalityc Converters
Brakes systems, drum, disk, and brake pads
ARYPSA MANUFACTURAS SA DE CV
pag. 46

AKI SEAT MANUFACTURING SA DE CV www.arypsa.com

www.deltakogyo.co.jp Machining and processing of steel and other materials
Seats
ASAHI ALUMINIUM MEXICO SA DE CV
ALAMBRADOS Y CIRCUITOS ELÉCTRICOS SA DE CV (DELPHI) www.asahial.co.jp
www.delphi.com Transmission parts
Plastic injection, air conditioner systems
ASC & CAWI MEXICO S DE RL DE CV
ALBRE MAQUINADOS SA DE CV www.ascundcawi.de
www.albremaquinados.com Connecting elements, wire and pipe bending parts
Development of tools, parts, molds or devices
ASHIMORI INDUSTRIA DE MEXICO SA DE CV
ALCARAZ ANTILLON SA DE CV www.ashimori.co.jp
www.alcansa.com.mx Seat belts, air bags, retractable curtains, trunk covers, retractable curtains for windows
Plastic autoparts (interiors and exteriors)
ASKATLAN MEXICO SA DE CV (BEND)
ALMOND-CATAFORESIS S DE RL DE CV www.bendwcm.com
www.almondproducts.com / www.cataforeis.com Racks, dollies, containers
Metal finishing services, coating application
ASMO MANUFACTURING DE MEXICO SA DE CV
ALPHAGTO www.asmo.co.jp
www.alphausa.com Small motors manufacturing company. Windshield wiper/Washer systems
Manufacturer of specialty washers, fastener assemblies and other small stamped components
ATG ADDITIVE MANUFACTURING SAPI DE CV
pag. 47

ALTOPRO SA DE CV www.atgadditive.com
www.altopro.com.mx Designing, developing and fabricating applications with metal additive manufacturing
BOPP clear film automotive
ATSUMI MEXICO
ALTORF DE MEXICO SA DE CV Gear systems, water pumps, power steering parts, valves, among others
www.altorfdemexico.com
Silicone spark plug cable, chemical products AUTOEXACTO SA DE CV
www.autoexactomexico.com
AMERICAN AXLE & MANUFACTURING SA DE CV / ACCUGEAR SILAO Automotive Diagnostics
www.aam.com
Axle, driveshaft, RDM, PTU, transfer case AXIOM
www.axiomgroup.ca
AMSU Thermoplastic injection molding of various components and assemblies
www.amsu.mx
AZIMATRONICS SA DE CV
pag. 127

3D Laser Scanner Services, “As Built” Documentation, Reverse Engineering, In-house inspections,
Dimensional analysis www.azimatronics.mx / www.gpamex.com
Design and development of engineering automotion projects
 AZPIARAN MEXICO, SA DE CV CARCOUSTICS INDUSTRIAL DE MÉXICO S DE RL DE CV
pag. 49
www.azpiaran.es www.carcoustics.com
Stampings Aluforming, blow molding, PU-Foaming, Die cutting, Thermoforming, Vacuumformin

CARROCERIAS DIVERSAS HALCON SA DE CV

B
www.carroceriashalcon.com
Bodywork for Cargo Vehicles

CATALINA PRECISION PRODUCTS DE MEXICO SA DE CV

Stamping
BADER MEXICO SA DE CV
www.bader-leather.de CCM ACOUSTICS SAPI DE CV
Cut leather pieces for automotive seats, finished leather www.ccmacoustics.com
Acoustic isolators
BAE INDUSTRIES INC
www.baeind.com CELANESE MATERIALS MEXICO, S. DE R.L. DE C.V.
Metal stamping and welding www.celanese.com
Wide range of engineered rubbers & plastic for key automotive applications
BANDAG DE MEXICO SA DE CV
www.bandag.com / www.bridgestone.com.mx CELAY SA DE CV

pag. 61
Bands to revitalise tires www.elay.com
Fineblanking, overmolding
BAUMANN SPRINGS DE LEON S DE RL DE CV
www.baumann-group.com CENTRACORE COMPANY DE MEXICO S DE RL DE CV
Techincal springs and wireforms

pag. 50
www.centracore.com
Aluminum high pressure die casting and the production machining and assembly of castings, forgings and
BENEFICIADORA DE ALAMBRES Y METALES SA DE CV (DEALBA) extrusions in aluminum, iron and steel
pag. 57

www.dealba.com.mx
Screws and special fasteners for industrial purposes, mainly for automotive, electric and electrical industries CENTRO GALVANIZADOR 2000, S.A. DE C.V.
www.cg2000.com.mx
BHTC MEXICO S.A. DE C.V. Immersion Galvanization
www.bhtc.com
Manufacturer of climate control panels and black boxes CHIYODA
www.chiyodaintegreusa.com
BILL FORGE DE MEXICO S DE RL DE CV Die Cutting
www.cieautomotive.com/-/bill-forge-de-mexico
Variety of cold, warm, hot forged and machined components CIE CELAYA S.A.P.I. DE C.V.
www.cieautomotive.com
BODYCOTE THERMAL PROCESSING DE MEXICO S DE RL DE CV Aluminum High Pressure Die Casting, stamping
www.bodycote.com
Heat treatment CIFUNSA DEL BAJIO SA DE CV
www.cifunsa.com.mx
BOREAL RESEARCH SA DE CV Crankshafts, safety parts for brake system, brackets, adaptors, knuckles
pag. 119

www.borealresearch.com
Company dedicated to the manufacture of metal parts, electrostatic paint (powder), CNC laser cutting, CIKAUTXO DE MEXICO S DE RL DE CV
sandblast and racks www.cikautxo.es
Development and manufacturing of plastic and rubber components
BORGWARNER TTS S DE RL DE CV
www.borgwarner.com CODAN RUBBER GUANAJUATO SA DE CV
Engine parts, drive train systems www.codan.com
Rubber articles for automotive industry
BOS AUTOMOTIVE PRODUCTS IRAPUATO SA DE CV
www.bos.de COFICAB LEON S DE RL DE CV
Automotive subassembly: Sun protection, luggage cover, load restraint, carrier systems www.coficab.com
Automotive electrical cables and wires
BOSCH MEXICO
www.bosch.com.mx COGLITEC SA DE CV (SULASTIC)
pag. 101

Brings together comprehensive expertise in vehicle technology with hardware, software and services to offer www.sulastic.com
complete mobility solutions Suspension parts, shock absorbing casters, vibration isolators
BRIDGESTONE COMANHI SA DE CV
pag. 51

www.bridgestone-mx.aiprx.com www.comanhi.com
Tires Automotive and industrial belts, hose and fittings
BULK TANK INTERNATIONAL S DE RL DE CV COMERCIALIZADORA DE EMPAQUES RALI SA DE CV
www.bulkinternational.com www.gruporali.com
Bodyworks, trailers and pipes We manufacture various plastic products for packaging, such as stretch film, plastic bags and adhesives
BURLTECH DE MÉXICO SRL DE CV COMESTEL AUTOMOTIVE TECHNOLOGIES MEXICANA S DE RL DE CV
www.burltech.com www.comstarauto.com
Aluminum casting Manufacturing of starter motors
BUSINESS SKILL DEVELOPMENT SA DE CV COMPAÑIA PLASTICA INTERNACIONAL SA DE CV
www.mready.mx www.coplainsa.com
Conferences, Workshops, Consulting Services and Cloud Computing Plastic injection
BUSMAN CONCEPTOS EN PIEL SA DE CV
www.busman.com.mx www.interio-vestiduras.com
Machining, design and repair of mechanical parts, molds and dies Automotive leather upholstery

CONCURMEX SA DE CV

C
www.concurmex.com
Leather steering wheel manufacturer

CAIMI LEON SA DE CV CONDUNET SA DE CV

www.caimileon.com.mx www.condumex.com.mx
PVC & PU Leather Harnesses

CONECTIVIDAD Y TELECOMUNICACION SA DE CV
www.contel.com.mx
Services and integration of Technologies of Information and Communications
 CONECTORES FLEXIBLES AUTOMOTRICES, SA DE CV
www.flexitech.com
Hose Manufacturing & Assembly
D
CONEXION EN MERCADOTECNIA SA DE CV DAI DONG MEXICO SA DE CV
www.conmersa.com www.daidong.com
Handling of packing and co-packing lines with specialized packaging in different materials Products design, mold design & production, injection molding and assembly

CONFORM AUTOMOTIVE DAIFUKU

www.conformgroup.com www.daifuku.com
Floor carpets, rear compartment trim, load floors, textile wheel liners, package shelves, plastics assemblies, Automated production chain
cut leather sets
DAIKYO NISHIKAWA MEXICANA SA DE CV
CONSORCIO CREATIVO INDUSTRIAL SA DE CV www.daikyonishikawa.co.jp
www.ccindustrial.mx Bumpers and interiors parts
CNC machining -Manufacture and precision pailer
DATWYLER RUBBER MEXICO S DE RL DE CV
CONSORCIO INDUSTRIAL MEXICANO DE AUTOPARTES SA DE CV (LEAR CORPORATION SA DE CV) www.datwyler.com
www.lear.com Rubber membranes for brake systems
Seats for pickups regular cab and crew cab, Foam
DAIMAY MEXICO AUTOMOTIVE, S. DE R.L. DE C.V
CONSULTORIA TECNOLOGICA Y DE SERVICIOS PROFESIONALES DEL BAJIO SC www.daimay.com
www.quantummobile.com.mx Sun visors, steering weels, headrests, overhead consoles, others
Software development services company
DCM DRAEXLMAIER COMPONENTS AUTOMOTIVE DE MÉXICO S DE RL DE CV
CONTICON SA DE CV mx.draexlmaier.com
www.grupocondumex.com.mx Electrical, electronic, indoor and storage systems
Production of electrolytic copper wire for the manufacture of electrical conductors
DEACERO SUMMIT SAPI DE CV

pag. 56
CONTINENTAL AUTOMOTIVE MEXICANA SA DE CV (CONTINENTAL TEVES) www.deacero.com
www.contiautomotive.com; www.conti-online.com Wire products for the automotive industry
Brake sensors (Wheel speed sensors)
DEKOSYS
CONTINENTAL CHASSIS AND SAFETY DIVISION www.dekosys.mx
www.continental-corporation.com Decorative plastic component products and high-precision mechanical components for interfaces between
Master cylinder, drum brakes, booster man and machine

CONTOUR HARDENING DE MEXICO S DE RL DE CV DELFINGEN MX COAHUILA, S DE RL DE CV

pag. 53

www.contourhardening.com www.delfingen.com
Induction heat trearment services, development and construction of heat treatment systems Corrugated plastic tubes for Automotive Harnesses

COPO TEXTILE MEXICO DEMO TECHNIC

www.grupocopo.com www.safe-demo.fr
Foam laminated fabrics for the automotive industry Interior plastic parts

CORPORACION DE FOMENTO EMPRESARIAL SA DE CV DENSO MEXICO SA DE CV

www.cofemsa.com www.globaldenso.com
Liaison Support, Inspection & Rework, Supplier Quality Support, Training – Core Tools Outsourcing, Material Air conditioning, radiators, alternators, water tanks for wiper systems
Handling Systems, Uniforms & Safety Products, Saving Energy Systems
DETROIT INDUSTRIA TERMICA SA DE CV
CORPORACION MANUFACTURERA AUTOMOTRIZ SA DE CV www.especialidadestermicas.com
www.juntasquebec.com Heat Treatment for the Automotive-Metalworking Industry
Empaques para motor / Gaskets
DIE CASTING CELAYA SA DE CV
CORPORACION MITSUBA DE MEXICO SA DE CV www.diecastingcelaya.mx
www.mitsuba.co.jp Aluminum injection die casting
Front wiper systems, starter motors for automobiles, windshield washer systems, horns for automobiles
DIGA SA DE CV
CORPORATIVO INTELIGENTE DE SERVICIOS INDUSTRIALES www.diga.com.mx
www.cisimexico.com Seals dust and water, Acoustic and thermal insulation, Noise reduction and Filtration
Manufacture of machining, blacksmithing, special welding and stainless steel projects
DIMACO METALMECANICA SA DE CV
pag. 121

CORTES DE PRECISION DE MEXICO, S DE RL DE CV www.dimaco-mx.com

Parts and accessories for automotive Design and manufacture of containers, dollies and material handling equipment

COTROMMA SA DE CV DISEÑO CENTRAL SA DE CV

pag. 54

pag. 58

www.cotromma.mx www.dicentral.com
Machinning, Tooling Wireforms

CROMACEL SA DE CV DISPPLE SA DE CV
pag. 59

Electroplating www.dispple.com
Powder coating, laser and plasma cut, machining, bending
CUEROMEX WET BLUE
www.cueromex.com DISTRIBUIDORA DE SUMINISTROS SA DE CV
Tanning and retanning maquilaservices, sale of wet blue, wet white and crust hides for automotive www.dissaweb.com.mx
Rubber splash guards, bumpers, chocks and mats for trucks
CURTIDOS ALTA CALIDAD
www.curtidosaltacalidad.com.mx DM COLOR MEXICANA SA DE CV (DAINICHISEIKA COLORS & CHEMICALS)
Automotive leather www.daicolor.co.jp
Colours and plastic compounds for injection, extrusion and blow molding
CURTIDOS Y ACABADOS KODIAK SA DE CV
www.kodiak.com.mx DMS MOLDES MEXICO SA DE CV
Bovine leather in Crust for the Automotive Industry www.shippo-mold.co.jp
Mold Maintenance and Repair
CURTIEMBRES DE MEXICO
www.curtiembresdemexico.com DOWA METALTECH MEXICO SA DE CV
Automotive leather www.dowa.co.jp
Real-to-real electroplating lines
CURTUMEX
www.curtumex.com
Leather for automotive interiors
 E
FAEZA ALLOYERS SA DE CV
www.faeza.com.mx
Ingots of aluminum & zinc alloys

FAIST ALUCAST
EAGLE OTTAWA SA DE CV
www.faist.net
www.eagleottawa.com/global
Machinning
Automotive leather
FAURECIA EXHAUST MEXICANA SA DE CV
ECENARRO MEXICO, S. DE R.L. DE C.V.
pag. 60

www.faurecia.com
www.ecenarro.com
Exhaust systems
Steel pieces (screws, knuckles, caps, and special pieces) metalic finishing for pieces
FERRE BAZTAN SA DE CV
ECKERLE DE MEXICO SA DE CV
www.ferrebaztan.com
www.eckerle-gruppe.com
Metal cutting
Brush holder assembly plates
FLEX & GATES DE MEXICO SRL DE CV
EG AUTOMATION SA DE CV
www.flex-n-gate.com; www.flexngate.com.mx
www.eg-automation.com
Bumpers, fenders, subassembly of autoparts
Tooling machining and automation supplier for assembly and inspection systems in the automotive industry
FORD
EKO EMPAQUES DE CARTON SA DE CV
pag. 122

www.ford.com
www.ekoempaques.com
Transmission Systems
Packaging solutions to the automotive industry through the standardization of processes
FORJAS DE CELAYA SAPI DE CV
ELASTOMIX MEXICO SA DE CV
www.cieautomotive.com
www.emix-jsr.co.jp
Cold forging
Masterbach carbon
FORMACERO
ELECTROPLATING & SURFACE ENGINEERING, SA DE CV
www.formacero.com.mx
www.eplating.com.mx
Wire and sheet cut
Surface treatments for automotive metal parts
FORTE INNOVATION CONSULTING SAPI DE CV
EL PEQUEÑO CURTIDOR DE LEON, SA DE CV
www.forteinnovation.mx
www.pcl.com.mx
Digital Transformation agency
Chemical and physical Research and development lab. Specialized extrusion capabilities. Specialty chemical
products for automotive, plastic and textile markets
FORTIPAK SA DE CV

pag. 125
www.fortipak.mx
ELRAD ELECTRONICS, SA DE CV
Cardboard sheets, boxes, and packages fabricated of corrugated cardboard, microcorrugated cardboard,
www.elrad-int.si
corrugated plastic, wood and hybrids.
Electronic Manufacturing Services
FP HIGH TECH DIVISION
EMINPACK SA DE CV
www.frescopack.com
www.eminpack.com
Plastic injection, packaging and plastic parts
Specialized packaging solutions with materials like carboard, coroplast and wood
FRAENKISCHE INDUSTRIAL PIPES MEXICO SA DE CV
pag. 63

EMPROPACK EMPAQUES PROFESIONALES SA DE CV

pag. 124

www.fraenkische.com
www.empropack.com
Corrugated plastic tubes, plastic extrusion for autoparts
Company with experience in the manufacture of packaging products
FREUDENBERG TELAS SIN TEJER SA DE CV
ENERTEC MEXICO S DE RL DE CV
www.freudenberg-filter.com
www.enertec.com.mx; www.johnsoncontrols.com
Automotive filters
Vehicle batteries
FUJI OOZX MEXICO, SA DE CV
ENT PRECISION MEXICO SA DE CV
www.oozx.co.jp
www.entrust-group.co.jp
Engine valves
Precision stamping parts, mircro stamping, screws, die casting, cold forging
FUJIKOKI DE MEXICO SA DE CV
ESPECIALIDADES TERMICAS INDUSTRIALES SA DE CV
www.fujikoki.co.jp
www.especialidadestermicas.com
Valves for air conditioning systems
Tratamiento térmico / Heat treatment
FUJIKURA AUTOMOTIVE MEXICO SALAMANCA SA DE CV
ESTAMP AUTOMOTIVE MX, S. DE R.L. DE C.V.
pag. 62

www.fujikura.com
www.estamp.es
Wide range of wire harnesses: small harnesses for doors and seats, lighting, HVAC, engine WH
Solutions in thermal and thermo-acoustic insulation
and body harnesses
ESYPRO INGENIERIA DE PROCESOS SAPI DE CV
FUJISEAL
www.esypro.com/esypro-mexico
www.fujiseal.com
Transportation Systems and Modular Storage
Plastics
EUROCAST MEXICO, SA DE CV
FUKOKU MEXICANA SA DE CV
www.groupe-gmd.com
www.fukoku-rubber.co.jp
Aluminium high-preassure diecasting, machining and assembly
Rubber and plastic products, brake parts
EVACOLORS DE LEON SAPI DE CV
FUMAQ SA DE CV
www.gruporevilla.com
www.fumaq.com
EVA for Packaging
Brake drums
EVERCAST
FUNPREBA DIVISION CASTING SA DE CV / FUNPREBA SA DE CV
www.cifunsa.com.mx
www.funpreba.com
Manufacture of casting and machining of automotive
Foundry

FURUKAWA / FAS
pag. 64

www.furukawaas.co.jp/english/

F Conectors, harnesses, cable

F&P MFG DE MEXICO SA DE CV

www.fandpmfg.com; www.fandp.com
Chassis and suspension parts, stamping, pedals
 G
GRUPO POCHTECA SAB DE CV
www.prodensa.com.mx/
Business and government consulting services

GST MANUFACTURAS DE MEXICO SA DE CV / GST AUTOLEATHER

GARAY COMPONENTES TUBULARES, SA DE CV
www.gstautoleather.com
www.hjgaray.es
Automotive leather
Develops and produces complex tubular components, especially for automotive sector
GSW DE GUANAJUATO S DE RL DE CV
GAT MEXICO SA DE CV
www.gswiring.com
www.cieautomotive.com
Manufacturer of wiring harnesses and systems component assemblies
Wheel hubs
G-TEKT MEXICO CORP. SA DE CV
GEHRING MEXICO
www.g-tekt.jp
www.gehring-group.com
Auto body frame component and Heavy Gauge Precision stamp parts
Gear honing machines; honing machines, horizontal spindle; honing machines, multiple spindles; honing
machines, vertical spindle
GT STEEL SA DE CV

pag. 134
www.gtseel.mx
GEMOMEX SRL DE CV
Control Cabinets, electrical enclosures, core clamps, tanks, containers, racks, design & engineering, powder
www.gemo-krefeld.de/en/Homepage.php
coating, rolling, bending, machining, assembly, welding, heavy fabrication
Sunroof Cables and Flexible Axles for Automotive Seats
GUANAJUATO TOOLING SA DE CV

pag. 133
GENERAL MOTORS MEXICO S DE RL DE CV
www.guanajuatotooling.com
www.gm.com
Manufacturing of equipment assembly, checking fixtures manufacturing, molds manufacturing
Automaker

H
GENTHERM
www.gentherm.com
Thermal Solutions

GEORG UTZ DE MEXICO S DE RL DE CV HAL ALUMINUM MEXICO SA DE CV

pag. 146

www.georgutz.com www.hai.co.jp
Manufacture and distribution of plastic-made reusable packaging system for transport , warehousing and Casting of autoparts in aluminum
intralogistics, as well as for technical parts for professional aplications
HALDEX TRACTION S DE RL DE CV
GIS / TRW www.haldex.com
www.gis.com.mx Brake systems for heavy trucks, trailers and buses
Foundry parts for Brake systems
HANWA STEEL SERVICE MEXICANA SA DE CV
pag. 126

GISHNER INC S DE RL DE CV www.hanwa.co.jp

Automation and robotics Steel rolls cut to specifications

GKN DRIVELINE CELAYA SA DE CV HARNESS ENGINEERING SERVICES DE MEXICO SRL DE CV

www.gkn.com www.coroplast.de/en
Driveshafts Harnesses

GLOBXEL S.A. DE C.V. HELLA AUTOMOTIVE MÉXICO SA DE CV

www.globxel.com www.hella.com
PES, PP and Nylon Nonwovens, PU foam with densities from 14/50 kg/m3 Manufacturer of electronic components and lighting systems

G-ONE AUTOPARTES DE MEXICO SA DE CV HERRAMENTALES DE PRECISION FELIPE JIMENEZ SA DE CV

www.g-tekt.jp Machinning and tooling
Stamping: body, engine
HERRAMENTALES PRESS
pag. 135

GRAMO INDUSTRIAL ELECTROMECANICA Y SERVICIOS INTEGRALES, SA DE CV www.suajespress.com.mx

pag. 131

www.gramoindustrial.com.mx Cutting dies, Dies for emboss and deboss, Dies for the metal mechanic industry, Injection molds, Fixtures
Design and manufacture of mechanical equipment
HERRAMENTALES Y TRATAMIENTOS TERMICOS DEL BAJIO
GROBER LEON S.A DE C.V. (TAP LEON) www.herramentalesdelbajio.com
www.grupoantolin.com Surface finishing processes after Heat Treatment as Shot peening, Die casting, Machined and
Interiors: Visors, roof, supports Industrial Design

GRUPO ANTOLIN SILAO SA DE CV HERSAN AUTOMOTIVE

www.grupoantolin.com www.hersan.com.mx
Interiors: Visors, roof, supports Plastic parts

GRUPO ARZYZ HFI

www.arzyz.com www.hfi-inc.com
Aluminum casting Molded Foam, Foam-in-place, Door trim, Instrument Panel & Console Covers, Seat trim & other interior parts

GRUPO DE INGENIERIA CAPRICORNIO SA DE CV HINO MOTORS MANUFACTURING DE MEXICO SA DE CV

pag. 120

www.ingcapricornio.com.mx www.hino.com.mx
Design, manufacturing, automation, installing and starting conveyors and material handling for Automaker, trucks
the automotive sector
HIPERPACK SA DE CV
pag. 132

GRUPO INDUSTRIAL PUERTO

pag. 136

www.hiperpack.com
Machining of parts for the food and automotive industry Specialized and innovate packaging with designs to fulfill the automotive industry requirements with
corrugated plastic and supplementary materials
GRUPO KOPAR SA DE CV
www.kopar.com.mx HIROMA PLAST
Motion Control Neumatic Systems www.hiromaplast.com
Plastic injection molding
GRUPO GONORMA DEL BAJIO SAPI (AUTOPLASTEK)
pag. 48

www.autoplastek.com HIROTEC MEXICO SA DE CV / AVANTEC SA DE CV

Plastic injection www.hirotecmexico.com
Manufacture metal stamped parts and assembly such as doors, hoods, roofs, fenders
GRUPO PLASMA AUTOMATION SA DE CV
pag. 128

www.gpamex.com HIROTEC TOOLING DE MEXICO S DE RL DE CV

Design and fabrication of CNC Cutting Tables with Laser, Plasma and Water-jet technology www.hirotectooling.com
Body in White Assembly Systems and Hemming Systems
 HIRSCHMANN AUTOMOTIVE MEXICO S DE RL DE CV
www.hirschmann-automotive.com INDUSTRIAS DE CALIDAD OVV SA DE CV

pag. 86
Connectors, Wiring in the chassis area, Special cable assemblies, High-Voltage applications, Sensors www.ovvindustries.com
Automotive interios and dunnage
HIRUTA MEXICO SA DE CV
www.hiruta-kogyo.co.jp INDUSTRIAS GW S DE RL (GOBAR SYSTEMS)

pag. 65
Chassis, transmission and suspension parts www.gobarsystems.com
Stamping, Injection molding and Contract Manufacturing
HITACHI INDUSTRIAL EQUIPMENT MÉXICO SA DE CV
www.hitachi-hiemex.mx INDUSTRIAS KYOSHIN
Oil-free air compressors and vacuum products Plastic Injection molding

HOC DIGITAL SA DE CV INDUSTRIAS METALICAS ELFER S DE RL DE CV

pag. 123
www.accsys.mx www.industriaselfer.com.mx
Software and Hardware specialized in RFID Racks, Containers, Pin Pallets, Platforms, Ramps, Dunnage in Polyurethane, Shelves and
Special requirements
HONDA DE MEXICO SA DE CV
www.honda.mx INDUSTRIAS MICHELIN SA DE CV
Automaker www.michelin.com.mx
Production of tires for cars and trucks
HONDA LOCK MEXICO SA DE CV
pag. 66

www.hondalock.co.jp INDUSTRIAS PLASMA CUT SA DE CV

pag. 129
Locks, sensors, vision systems, switches, rear mirrors www.gpamex.com www.azimatronics.mx
Development of Fixtures, Precision Racks, Process Racks, Checking Fixtures, etc.
H-ONE CO., LTD
www.h1-co.jp INNOVACION EN EMPAQUES SA DE CV (INEMEX)

pag. 137
Automobile framework parts www.inemex.com
Offers complete packaging solutions to a variety of industries
HOPE INDUSTRIES DE MEXICO SA DE CV
www.hopeglobal.com INFAMOL
Interior parts: armrest, sunroof curtains, strips for seating www.infamol.es
High precision molds for plastic injection molding
HUTCHINSON AUTOPARTES MEXICO SA DE CV
www.hutchinsonworldwide.com INFINISH ACABADOS INDUSTRIALES SA DE CV
Seals and hoses www.infinishai.com.mx
Powder painting
HYBERNYA INDUSTRIAL SA DE CV
www.hybernya.com INGEDETEC LEON, SA DE CV
Sheet metal fabrications and CNC machining services www.ingedetec.com
Technological solutions
HYBRID MANUFACTURING AND ENGINEERING S DE RL DE CV
www.hybridmet.com; www.ryobi.com INGENIERIA EN MANTENIMIENTO INDUSTRIAL Y CONSTRUCCIÓN CONSMART SA DE CV
pag. 52

Aluminum casting and machining www.consmart.mx

Racks and material handling, cast, stamping, machining of special parts, industrial maintenance, construc-
tion, civil work, engineering design and development

I INGENIERIA EN MAQUINADOS EN CELAYA SA DE CV

www.inmace.com.mx
Specialized in design and manufacturing Turnkey projects to the automotive and alimentary industries

IDEALCOLOR, SA DE CV INGENIERIA Y PROCESOS HERMAN SA DE CV

www.coatcolor.com.mx Precision tooling in series production
Powder coating line for metallic parts (Steel, Aluminum, Steel several alloys)
INGENIERIA Y SISTEMAS DE CONTROL IREME SA DE CV
IF DE MEXICO www.ireme.com.mx
Manufacture aluminum for cars Automation, Engineering and Tooling manufacturer

IK PLASTIC COMPOUND MEXICO SA DE CV INMEKHA ENGINEERING S.A. DE C.V.

pag. 138

www.inabata.co.jp www.inmekha.com
Compounding of resins Material handling equipment and automotive wire

IKD FRAEZA SA DE CV INMETMATIC SA DE CV

www.ikd-china.com www.multimatic.com
High-precision aluminum die casting products Stamping, hinges, suspension parts

IKEGAMI MOLD DE MÉXICO SA DE CV INOVAPIEL SAPI DE CV

www.ikegami-mold.com www.gruporevilla.com
Injection mold repairs Synthetic leather

ILPEA S DE RL DE CV INSUMA QUALITY SOLUTIONS S DE RL DE CV

pag. 150

www.ilpea.com www.insumamx.com
Fuel lines, water lines, Vacuum lines for brakes system, lower moldings for windshields and other glass soft Quality control services, with focus in inspection, sorting and rework activities
moldings
INTEVA PRODUCTS
IMASEN MEXICO TECHNOLOGY SA DE CV www.intevaproducts.com
www.imasen.co.jp Closure systems, interior systems, motors & electronics and roof systems
Seat rails, seat parts
IPC PIQUA DE MEXICO, S DE RL DE CV
IMEXAZA SA DE CV www.industryproductsco.com
www.imesaza.es Die cutting, gaskets
Quenching and tempering treatments in a controlled enviroment
IRISO ELECTRONICS
INALFA ROOF SYSTEMS DE MEXICO S DE RL DE CV www.iriso.co.jp
pag. 67

www.inalfa-roofsystems.com Electrical components and connectors

Sunroofs and open roof systems
ISS MEXICO MANUFACTURING SA DE CV
INDEPLAS High precision parts and quality for automobile manufacturers
www.indeplas.com.mx
Plastic injection ITECH ECOENERGIAS SA DE CV
www.itechgrupo.com
Handling material solutions and powder coating line
 ITT MOTION KOLBENSCHMIDT DE MEXICO S DE RL DE CV
www.itt.com www.kspg.com
Highly engineered brake pads for the automotive industry Aluminum pistons

IWAI METAL CENTRAL MEXICO SA DE CV (UACJ) KOLEKTOR GROUP

www.iwaimetal.com www.kolektor.com
Auto parts and metal processing, press, welding and assembly Conmutator, slip rings, ferrite cores and inductive components, magnetic components, rotors, plastic injection

IXAYA BUSINESS SA DE CV KOMAX DE MEXICO SA DE RL DE CV

www.ixaya.com www.komaxgroup.com
Automatic Data Collection and Traceability Solutions for wire processing and testing of wire harnesses and modules

KOSTAL MEXICANA SA DE CV

J www.kostal.com
Electric systems, instrument panels

JANESVILLE DE MEXICO SA DE CV (MOTUS INTEGRATED TECHNOLOGIES) KROMBERG & SCHUBERT MEXICO S EN C

pag. 79

www.motusintegrated.com www.kromberg-schubert.com
Interior and exterior acoustical applications Harnesses

JAPAN CLIMATE SYSTEMS K.S. GLEITLAGER DE MEXICO S DE RL DE CV

www.jcsaircon.co.jp www.kspg.com
Air conditioner systems, evaporators, condensers Steel Bushings

JOHNAN DE MEXICO SA DE CV K.S. SERVICIOS SA DE CV

Electric window system www.kromberg-schubert.com
Electric window system Automotive-Electrical Harnesses

JUNTAS QUEBEC K-TECH INDUSTRIAL DE MEXICO SA DE CV

www.juntasquebec.com.mx www.ktechmx.com
Juntas para motor Plastic injection & Mold making, repairing and maintenance

KUH7 SOLUTIONS SA DE CV

K
www.kuh7.mx
Automatization of the process, systematization of the operations and to the digitalization of the information

KYB MEXICO SA DE CV (KMEX)

www.kybmx.com
KALOTEC DE GUANAJUATO SA DE CV Shock absorbers
www.katolec.com
Electrical Circuits

KAMAX MEXICO, S DE RL DE CV
L
pag. 68

www.kamax.com
Fasteners & complex cold formed products for the automotive & heavy truck industry

KANEFUSA MEXICO LANGER MOLDS AND CUTS

www.kanefusa.net/en/worldwide/americas.html www.ke-langer.de
Cutting blades for metal, aluminum, stainless steel, pipes Plastic injection molds

KANEMATSU CORPORATION LEAN APP SA DE CV (MONITOR)

pag. 151

www.kanematsuusa.com www.monitorapp.io
Steel The industrial IoT platform that drives operational performance

KANEPACKAGE DE MEXICO SA DE CV LEONI CABLE, SA DE CV

www.kanepackage.mx www.leoni.com
Designs, manufactures and sells a wide range of packaging and cushioning products for various Single-core automotive cables
industry requirements
LEGGETT & PLATT AUTOMOTIVE MEXICO S DE RL DE CV
KASAI MEXICANA SA DE CV www.leggett-automotive.com/
www.kasai.com.mx Wireless charging, mechanical cables, motor and actuators
Doors and interior plastic components for automotive
LISYX TECHNOLOGIES SA DE CV
KAUTEX TEXTRON DE MÉXICO S DE RL DE CV www.lisyx.com
www.kautex.de; www.textron.com Technology Company providing digital key services on Digital Economy
Fuel tank systems
LONGORIA AND CO. TOOLING MACHINING
KAWADA MX SA DE CV www.toolingmachining.com.mx
www.kawadakk.jp/en Tooling, fixtures, gauges and parts
Wheel hub, hub support, knuckle, spindle, arms, hanger bracket, companion flange, joint shaft, propeller shaft
LTC ROLL & ENGINEERING
pag. 69

KEIAISHA MEX S DE RL DE CV www.ltcroll.com

www.keiaisha.co.jp Structural pieces, rocker panels, roll forming, stamping
Automotive Metal Stamping
LUBRI-LAB MX SA DE CV
KENMEX SA DE CV www.lubrilabmx.com
Plastic injection, PP, HDPE, LDPE, ABS, PC, TPE, TPU Lubricants

KINUGAWA MEXICO SA DE CV
www.kinugawa-rubber.co.jp
Plastic mouldings, rigid and flexible, vibration isolators and hoses for automotive

KISHIDA GUMI SA DE CV
M
www.kishidagumi.com
Engineering, Setting of all type of industrial machines. Project of Quality control. Making design for weld line MACAUTO MEXICO SA DE CV
pag. 70

for Automovil manufactures. www.macauto-group.com

Auto sunshades, deflector solutions, cover and nets systems
KOBELCO CH WIRE MEXICANA SA DE CV
www.kobelco.co.jp MAFMEX S DE RL DE CV
Automotive manufacturers of fasteners and other cold forged metal parts. www.maflow.com
Manufacturer of cables for air conditioning
 MAGNA ASSEMBLY SYSTEMS DE MEXICO SA DE CV MATTOON PRECISION MANUFACTURING
www.magna.com www.mpmiusa.com
Driveshaft, plastic injection, body, chassis, drive train, exterior, seats, interiors Precision machining of automotive parts

MAGNA AUTOMOTIVE SYSTEMS SA DE CV MAZDA MOTOR MANUFACTURING DE MÉXICO SA DE CV

www.magna.com www.mazda.com.mx
Seat, closures, body, chassis, electronic, hybrid, automatics, exterior, transmissión and roof systems Automaker

MAGNUS LEATHER MCCORMICK TRACTORES

www.magnusleather.com www.mccormick.it.mx
Automotive leather Tractors

MAHLE SISTEMAS E FILTRACION DE MEXICO SA DE CV MC SYSTEMS METAL COATINGS MEXICANA SA DE CV

www.mahle.com www.mcsystems.ne.jp
Engine parts Surface treatments, coatings

MAILHOT DE MEXICO S DE RL DE CV MD ELEKTRONIK DE MEXICO S DE RL DE CV

www.mailhotindustries.com www.md-elektronik.de
Hydraulic cylinders Data cables and electronic components

MAKINA INDUSTRIAL SERVICES SA DE CV MD MANUFACTURING SA DE CV

www.makinais.com www.mdmanufacturing.mx
Solid bar & tube blanking/cutting; Machining of high production components; Design & Manufacture of special Plastic injection and blow molding components for interiors
tooling and gages
MECANOMATIC GTO SA DE CV

pag. 73
MANUFACTURAS DIVERSAS SA DE CV (DC GASKETS) www.mecanomatic.com
pag. 55

www.dcp.com.mx High precision machinning, turning and milling

Gaskets, pistons, brakepads and lubricants
MECAPLAST GROUP
MANUFACTURAS METALICAS ALME SA DE CV www.mecaplast.com
www.bajiometal.com Plastic injection parts
Material Handling
MEDINA TORRES SA DE CV
MANUFACTURERA DE CUEROS TREVIÑO SA DE CV www.medinatorres.com
www.leathermex.com Automotive leather for upholstery, steering wheel, armrest, seats, gear shift
acabado de la piel para automóviles, volantes, cubiertas para asiento y otras molduras interiores como
consolas centrales, perillas, apoya brazos y doorpanels MERCA CARTON SA DE CV

pag. 139
www.mexipack.com.mx
MAQUINADOS AUTOMOTRICES Y TALLERES INDUSTRIALES DE CELAYA SA DE CV Manufacture of industrial packaging in single and double corrugated cardboard, corrugated plastic cardboard
www.cieautomotive.com and card core
Steel machining products for electronically assisted steering applications, hydraulic steering and transmission
systems MERIDIAN AUTOMOTIVE SYSTEMS DE MEXICO S DE RL DE CV
www.meridianautosystems.com
MAQUINADOS DEL BAJIO SA DE CV Front and rear modules, exterior lighting, sheet molding compound (SMC), under the hood and structural
Machinning components

MAQUINADOS DE PRECISION CORTAZAR MERIT TECHNOLOGIES WORLDWIDE

www.maprecor.com.mx www.gnsmtw.com
Machinning Hot stamping

METAGRA MEXICO SAPI DE CV

pag. 75

MAQUINADOS DE PRECISION DE MEXICO SRL DE CV

www.mapremex.com.mx www.metagra.com
Machining company Valves, screws, metal pieces

MAQUINADOS JARAL METAL ONE

Manufacturing and machining of metal parts, CNC turning www.metaloneamerica.com
Steel for stamping
MAQUINADOS TECNOLÓGICOS DEL CENTRO SA DE CV
pag. 71

www.maquitec.mx METAL PARK SA DE CV

Machining and Plastic injection molding maintenance www.metalpark.com.mx
Die casting
MAQUINADOS Y MAQUILAS ESPECIALES SA DE CV
www.maqmaqro.com / www.maymaes.com METALICOS ETERNITY
Manufacturing, production and dimensional certificates of mechanical parts in medium and large batches Racks and platforms

MEXICANA DE PIEZAS PLASTICAS SA DE CV

pag. 76

MARKET EXPERT TIRE SRL DE CV

www.tiredirect.com.mx www.mexicanadepiezasplasticas.com
Pneumatics Design, development, and the manufacturing of plastic pieces

MARQUARDT MEXICO S DE RL DE CV MEXPULLEY SA DE CV

pag. 72

www.marquardt.com www.mexpulley.com
Ignition systems, instrument panels Engine pulleys

MARTINREA DEVELOPMENTS DE MEXICO SA DE CV MICHELIN

www.martinrea.com www.michelin.com
Stamping Tire Manufacturing

MARVES AQSTC MILLIKEN

www.marves.com www.milliken.com
Solutions in acoustic and thermal insulation for the automotive industry Automotive Non-woven Solutions

MATERIAS PLASTICAS Y ELASTOMEROS SA DE CV MINDROD MAQUINADOS INDUSTRIALES RODRÍGUEZ, SA DE CV

pag. 80

www.mpeplastics.com www.mindrod.com
Plastic parts for shock absorbers, suspension, brakes and CV joints Manufacture and repair of metal parts for different types of industry in the area

MATSUJU MEXICANA SA DE CV (MATSUMOTO HEAVY INDUSTRY) MINAMIDA MEXICANA SA DE CV

pag. 77

www.matsumoto-jukogyo.co.jp www.minamida.co.jp
Oil jet valve assy, EGR cooler pipe, automotive pipes, sunroof parts Cold forging parts, bolts and nuts

MINO INDUSTRY
Molded aluminum for the automotive industry
 MISA NATIONAL METAL PROCESSING SA DE CV
www.misa.com NIFCO CENTRAL MEXICO S DE RL DE CV
Steel and aluminum www.nifco.com
Plastic screws
MITSUI KINZOKU ACT MEXICANA SA DE CV / STEEL TECHNOLOGIES / NUCOR
pag. 78

www.act.mitsui-kinzoku.co.jp/en NIPPON BEE CHEMICAL MEXICO SA DE CV

Locks, side door latch, striker www.nipponbeechemical.jp/english
Coatings for plastic
MMM AUTOPARTS AMERICAS SA DE CV
es.mmm.es NIPPON PAINT AUTOMOTIVE COATINGS MEXICO SA DE CV
Wide range of tubes for both fluid conduction and structural use, covering all the needs of the automotive www.nipponpaint-automotive.com
market Production of automotive coatings and water-based paints, water-thinned paint

MOLDES Y PLÁSTICOS SAN DIEGO, SA DE CV NIPPON STEEL PIPE MEXICO SA DE CV

www.moplas.mx www.nssmc.com/en
Injection Molding, Manufacture of injections molds, Machining of tools, prototype design Acer Steel for stamping

MOLDES Y PRODUCTOS INYECTADOS DE PLASTICO SA DE CV NISHIKAWA SEALING SYSTEMS MEXICO SA DE CV

pag. 82

www.mypi-plasticos.com www.nishikawa-rbr.co.jp/english
Molds and precision injection of plastic parts Door seals

MOLTEN AUTOMOTIVE DE MEXICO, SA DE CV NISSEN CHEMITEC MEXICO SA DE CV

www.molten.co.jp www.nissenchemitec.com
Air intake components for engines, chassis parts, and interior and exterior items Plastic injection molded parts for the automotive industry

MONROE MEXICO SA DE CV NISSIN BRAKE DE MEXICO SA DE CV

www.monroe.com.mx; www.tenneco.com www.nissinbrake.com
Shock absorbers Brake systems

MORIROKU NKP
www.moriroku.co.jp/english www.nkparts.com
Interior & Exterior Plastic automotive parts Logistic for automotive companie

MUBEA NOBLE METAL PROCESSING DE MEXICO S DE RL DE CV (AMTB SUMMIT)

www.mubea.com www.nsmpmexico.com
Tubular Shafts Laser welded blanks (LWBs)

MULTITECH INDUSTRIES DE MEXICO NOVARES MEXICO SA DE CV

www.multitechind.com www.novaresteam.com
Manufacturer of cold headed fasteners, machined components, springs, stampings and wire forming Manufacturing of engine components, bezels & clusters, air vents, handles, among others

MURTRA LEON SA DE CV NOVATEC PAGANI, SA DE CV

pag. 140
pag. 81

www.murtraleon.com www.novatec.com.mx
Polypropylene yarns for automotive and cargo nets, car extinguisher straps, webbing for spare Automotive containers

MVA ENGINEERING DE MEXICO S.A. DE C.V. NOVATECLEON SA DE CV

pag. 83

www.mvaengineering.mx www.novatecleon.com
Design and engineering projects Injected and blow molded plastic components

NSK BEARINGS MANUFACTURING MEXICO SA DE CV

www.mx.nsk.com

N Bearings

NSK-WARNER MEXICO SA DE CV
www.nsk-warner.com
NACHI-TOKIWA Production of clutches, gaskets and friction and separated plates
www.nachi-tokiwa.co.jp
Tooling NUKABE MEXICANA SA DE CV
www.nukabe.co.jp
NACIONAL DE COBRE SA DE CV Parts for power transmission devices for automobiles
www.nacobre.com.mx
CNC machining to produce forged parts in brass, copper and aluminum. Wires, flats and profiles in cooper, NUFER PLUS SA DE CV
brass and bronze www.nuferplus.com.mx
Lubricants and cutting oils
NAKAGAWA SPECIAL STEEL MEXICO SA DE CV
www.nssiglb.com
Cutting of special steel/special steel processed products (such as cold finished steel bars, hot/cold forged
products)

NEDEC
O
www.nedec.com
From fundamental parts to manufacturing precision components based on root technologies. OGAWA INDUSTRIA DE MEXICO SA DE CV
pag. 84

www.ogawa-industry.co.jp
NEWMAN TECHNOLOGY MEXICANA SA DE CV Cold forged automotive parts
www.newmantech.com
Exhaust, Door Frame, and Exterior Trim products OHASHI TECHNICA MEXICO SA DE CV
www.ohashi.co.jp/english
NHK SPRING MÉXICO SA DE CV Brake and engine autoparts
www.nhkspg.co.jp
Springs, precision components, suspension disc units, seats, stabilizer tortion bars and bolts OKAWA MEXICANA SA DE CV
www.okawaseira.co.jp/english
NICOMETAL BAJIO Hose nozzles with cold forging technology
www.nicometal.com
Process steel, in coil and sheet OKAYA
www.okaya.co.jp/en
NIDEC MOBILITY MEXICO S DE RL DE CV Steel, machinery, chemical products and electronic componentes
www.nidec.com
Manufacturing of automotive electronics components and systems OMEGA MEXICO AUTOMOTIVE ENGINEERING SA DE CV
www.omegamx.icoc.cc/h-index.html
Standard components for machinery
 OMRON MEXICO S.A. DE C.V. PLASESS MEXICO SA DE CV
www.automation.omron.com/es/mx/ www.plasess.com
Leader in the automation field. Providing products & services like control, safety, vision, movement & robotics. Plastic Injection

PLASMATOOLING SA DE CV

pag. 130
ONTARIO DIE INTERNACIONAL
www.ontariodie.com www.gpamex.com
Dies for cutting leather High precision CNC machining

OPTIMEN SC PLASTIC OMNIUM AUTO EXTERIORES SA DE CV (INOPLAST COMPOSITE SA DE CV)

www.optimen.com.mx www.plasticomnium.com
Mexican software development company Plastic injection and painting for bumpers

ORBINGENIERIA SA DE CV POLIMEROS ESPECIALES SA DE CV

pag. 142

www.orbingenieria.com www.polimerosespeciales.com
Heat exchangers (coolers, pasteurizers, heaters, evaporators, condensers, etc.) Resin

POLIMEROS Y DERIVADOS SA DE CV

pag. 88
ORBIS PLASTIC MOLDING DE MEXICO SRL DE CV
www.orbiscorporation.com www.polimeros.com
Plastic Products Non woven fabrics

OSHKOSH CORPORATION POLIURETANOS SW LEON SA DE CV

www.oshkoshcorporation.com www.woodbridgegroup.com
Specialty trucks and truck bodies and access equipment Seat cushioning components

OUTTECK SA DE CV POLLMANN INTERNATIONAL

www.outteck.com www.pollmann.at
Solutions for painting and metallizing auto parts Manual processes for large sunroof mechanisms and door locks

POSCO MPPC SA DE CV
www.poscomppc.com.mx

P Cutting metal rolls, cutting plates into hot and cold

PPG INDUSTRIES DE MEXICO, SA DE CV

www.ppgcoatingsservices.com
PACKAGING STORE DE MEXICO, SA DE CV Electrocoating
www.packagingstore.com.mx
Packaging items PRECISION MECANICA MEXICANA SA DE CV
Gas pumps
PAIGE ELECTRIC DE MEXICO S DE RL DE CV
www.paigeelectric.com PRECISION TOOLS
Wires and cables manufacturer www.ptservice.com
Tools for automotive
PANELFISA-MEX SA DE CV
pag. 87

www.panelfisa.com PRETTL ELECTRIC DEL BAJIO SA DE CV

Company dedicated to screws and other fastening elements www.prettl.com
Harnesses and sensors
PARKER TRUTEC
www.parkertrutec.com PROMOTORA DE REPUESTOS AUTOMOTRICES SA DE CV
Surface treatments www.prasaautopartes.com.mx
Aftermarket products
PASS AUTOMOTIVE
www.pass.de PTI DOS DIVERSIFIED OUTSOURCING SOLUTIONS S DE RL DE CV / PTI QCS DE MÉXICO S DE RL
Production of rubber and synthetic materials as well as complex assemblies. DE CV
www.ptiqcs.com
PEC DE MEXICO SA DE CV Warehousing, sequencing, kitting, packaging, logistics, inspection, rework, paint and coatings, assemblyu
www.pecj.co.jp services, plastic injection
Automotive fuses and precision metal forming
PUMA MASTER TOOLS SA DE CV
PETROFER LATINOAMERICANA SA DE CV www.performanceoilservices.com
www.petrofer.com.mx Manufacturing of special parts: bushings, rollers, spindles, sealing and plastic injectors. Reverse Engeneer-
Industrial lubricants and specialized fluids ing. Integration and project Design. Control and automation

PYA AUTOMOTIVE S DE RL DE CV
pag. 89

PIELES AZTECA SA DE CV
www.teneriaazteca.mx www.pyaautomotive.com
Manufacture of leather products Injected rubber and plastic, Exterior Body, Suspension and mount Steering and Axle

PIELES FINAS DE ALTA MODA SA DE CV

Q
Automotive leather

PIERBURG PUMP TECHNOLOGY MEXICO SA DE CV

www.kspg.com
Valves, vacuum pumps
QENGINEERING PLASTIC PRODUCTS MEXICO SA DE CV
PINTURA, ESTAMPADO Y MONTAJE SAPI DE CV www.quadrantplastics.com
www.cieautomotive.com Engineering plastics
Stamping, assembly and painted parts

R
PINTURAS Y QUÍMICOS DE MÉXICO, S DE RL DE CV
www.berlac-mexico.com
Development and production of high-quality chemicals

PIRELLI NEUMÁTICOS DE MÉXICO SA DE CV

RACK PROCESSING DE MEXICO SRL DE CV
www.mx.pirelli.com
www.rackprocessing.com
Tires
Repair and Maintenance, Materials handling equipment
PISTONES MORESA SA DE CV (KUO AUTOMOTRIZ)
RACKS DEL BAJIO S DE RL DE CV
www.kuo.com.mx
www.racksdelbajio.com
Pistons and bolts for engine
Distribution of racks and warehousing equipment for the automation of logistics process and warehousing
 RC TOOLS SA DE CV
www.rctools.com.mx SAMOT INDUSTRIA MECÁNICA S DE RL DE CV

pag. 93
Thermoformed containers www.samot.com.br
Parts in Aluminum, Steel and Stainless Steel. Turning, grinding, and hard anodizing
RDCM SRL DE CV (HYBRID MANUFACTURING & ENGINEERING S DE RL DE CV)
www.ryobi.com; www.ryobidiecasting.com SAMU MEXICO, SA DE CV
Transmission housings www.samudies.co.kr
Designs and produces plastic injection molding
REED MULTIMEDIA S DE RL DE CV
www.difraxion.com SAMTECH AUTOMOTIVE MEXICO
Communication services for automotive industry www.samtech.co.jp
Manufacture and sale of forged parts and flow forming parts for automobiles, as well as high-pressure
REHAU SA DE CV gas cylinders
www.rehau.com.mx
Inner belt line moldings, windshield, moldings upper and lower, roof ditch moldings SANAC PRECISION MEXICO S.A. DE C.V.
www.sankyokk.co.jp
RELATS MEXICO SA DE CV
pag. 90

Screw parts, stampings, machining, resin injection, casting, lathe, among others
www.relats.com
Thermal, mechanical and electrical protection sleeves and heat shields SANDHAR TECHNOLOGIES DE MEXICO S DE RL DE CV
www.sandhargroup.com
RESORTES Y FORMAS DE ALAMBRE – RFA Aluminium pressure die casting
www.paginasprodigy.com/luciomtzfco/enindex.htm
Techincal springs and wireforms SANYO SPECIAL STEEL
www.sanyo-steel.co.jp
REVILLA Y COMPAÑIA SA DE CV Automotive electronics
www.gruporevilla.com
Synthetic leather SANKO GOSEI MEXICO SA DE CV
www.sanko-gosei.com
R-F HOODS & TRUCK PARTS S.A. DE C.V.
pag. 91

Plastic injection
www.refividrio.com.mx
Hoods, bumpers, collision parts and accessories for heavy duty trucks SANKYO KOGYO
www.skjpn.com/english
RIKEN SPRING MEXICANA SA DE CV Sunroofs, locks, seats and brake pieces
www.riken-spring.com.mx
Manufacturers of mechanical wire springs for the automotive sector SANNOHASHI MANUFACTURING MEXICO SA DE CV

pag. 94
www.sannohashi.co.jp
ROCAND MOLDE Y PLÁSTICO, S DE RL DE CV Manufacturing company of sophisticated engine bolts and pins
pag. 92

www.rocand.com
Blow and injection Molds SANOH INDUSTRIAL DE MEXICO SA DE CV
www.sanoh.com
ROECHLING AUTOMOTIVE MEXICO Tubular products for automobiles and transportation equipment, and automotive plastic products
www.roechling.com
Engineering plastics SANWA PACKING INDUSTRY MEXICO SA DE CV
www.sanwa-packing.co.jp
ROKI MEXICO SA DE CV Production of various gaskets, heatshields and packings
www.roki-jp.com
Manufacture of gasoline engines and their parts for motor vehicles SCHAEFFLER MEXICO S DE RL DE CV
www.schaeffler.com
RONGTAI GROUP Bearings
www.rtco.com.cn
Tooling design and manufacture,aluminum alloy die-casting and precision machining SCHERDEL DE MEXICO S DE RL DE CV
pag. 95

www.scherdel.de
ROPACK SA DE CV Springs
www.novaplastic.mx
Specialized company for industrial packaging plastic and cardboard corrugated, thermo-formed, thermosh- SHIMMEL SA DE CV
pag. 96

able, expandable, foams, poly bubble, elastic film www.schimmel.com.mx

Injection Molding, Manufacture of injections molds, Machining of tools, prototype design
ROTO-MEX SA DE CV
www.rotomex.com.mx SEKISUI PLASTICS MEXICO, SA DE CV
pag. 97

Equipment and consumables for surface finishing www.sekisuiplastics.com

Front and rear bumpers, Tool box, Floor spacers, Seat core, Door Pad, Lid board core, Packaging
RPK MEXICO SA DE CV
www.rpkmexico.com SELLOS ESPECIALMENTE DISEÑADOS SA DE CV
pag. 74

Compression, torsion, tension, and wave springs, wire forms, rings and other safety components www.mefrup.com
Seals, gaskets
RSB TRANSMISSIONS DE MEXICO S DE RL DE CV
www.rsbglobal.com SERPLASA
Axles, transmission parts www.serplasa.com.mx
Plastic injection molding
RYMBA INDUSTRIAL S.A. DE C.V.
www.rymbaindustrial.com SERVIACERO PLANOS SA DE CV (SERVIACERO WORTHINGTON)
Specialists in ergonomic design, manufacture and maintenance of automotive racks and specialized www.serviacero.com/worthington
containers for material handling Steel for stamping

S
SERVIACERO TUBULARES
www.serviacero.com
Production of high spec mechanical tubes

SERVICIO DE INGENIERIA INDUSTRIAL Y OUTSORCING SA DE CV

pag. 98

SA AUTOMOTIVE
www.siiosa.com
www.saautomotive.com
Machinning
Door panel components
SERVICIOS VISTAMEX SA DE CV
pag. 110

SAGA TEKKOHSHO MEXICANA SA DE CV

www.serviciosvistamex.com
www.satetsu.co.jp
Plastic injection
Bolts, screws
SERVILAMINAS SUMMIT MEXICANA SA DE CV
SAINT GOBAIN
www.summitmx.com
www.saint-gobain.com.mx
Comercialization and innovation of steel supply systems
Windshields
 SETEX AUTOMOTIVE MEXICO SA DE CV (TACHI-S) SRG GLOBAL MEXICO S DE RL DE CV (GUARDIAN)
www.tachi-s.co.jp/en/ es.srgglobal.com
Seating Grills, emblems, interior panels

SHAWMUT STANDARD PROFIL MEXICO SA DE CV

www.shawmutcorporation.com www.standardprofil.com
Headliner & sunvisor, pillar, door trim and console, seating, sunshade/roller shade, cover materials Seals

SHILOH INDUSTRIES STANLEY ELECTRIC MEXICO SA DE CV

www.shiloh.com www.stanley.co.jp/e/company
StampLight™: Pillars, Axle Brackets, Shock Towers, Brake Booster Components, Side/Cross-members, Automotive lighting equipment and electronic components
Reinforcements & Assemblies.
STANT MEXICO SA DE CV
SHINANO KENSHI GROUP (SKG) www.stantic.com
www.shinanokenshi.com Filler pipes, carbon canisters, fuel management, valves, thermostats, closure caps, capless refueling
Precision electric engines systems, thermal valves, transmission oil valves, cap canisters

SHINIL MEXICANA SA DE CV STEELPAC DE MEXICO SA DE CV

www.shinil.com.mx www.serviacero.com/orbis
Plastic pieces for interior, plastic compounds Offers returnable packaging solutions, such as containers, racks and pin paller

SHINSHO MEXICO SA DE CV / KOBE STEEL / METAL ONE / OSAKA SEIKO / GRUPO SIMEC / O&K STEEL TECHNOLOGIES DE MEXICO SA DE CV
AMERICAN www.steeltechnologies.com
www.shinsho.co.jp/english Procesing steel coils
Steel products
STREIT MEXICO, S DE RL DE CV
SHOEI MEXICANA SA DE CV www.groupe-streit.com
www.shoei-kgy.co.jp Machining of center and turbine housings for turbocompressors
Automotive metal stamping
SUAJES Y PREPARACIONES
SHOWA AUTOPARTS MEXICO SA DE CV Wire forms
www.showa1.com
Electric steering systems SUMINOE TEXTILE DE MEXICO SA DE CV
www.suminoe.us
SIBAPLAS SA DE CV Automotive textiles
Precision plastic injection
SUMIMOTO ELECTRIC WIRING SYSTEMS
SINDEUR SA DE CV Wiring systems manufacturer
Plastics for interiors
SUMITOMO CORPORATION DE MEXICO SA DE CV
SISTEMAS DE ARNESES K&S MEXICANA www.sumitomocorp.co.jp
www.sewsus.com Steel, non-ferrous minerals
Harnesses
SUMMIT PLASTICS SILAO S DE RL DE CV
SISTEMAS MECATRONICOS INTICA SAPI DE CV www.summitpolymers.com/global/summit-plastics-silao
www.intica-systems.com Plastic injection
Provides customized solutions, specially adapted to your technical and commercial requirements, for the
automotive and industrial electronics sectors SUZUKI GARPHYTTAN S.A. DE C.V.
www.suzuki-garphyttan.com
SJM FLEX MÉXICO SA DE CV Manufacturer of round, flat and shaped oil tempered or stainless spring wire
www.sjmflex.de
Flex tube for automobiles and motorcycles

SK MATERIALS MEXICANA SA DE CV
www.katosansho.com T
Synthetic Rubber, Engineering Plastics, Recycled Plastic, Thermoplastic Elastomer, Rubber Compound,
Carbon Black, Rubber Processing Oil, Rubber Chemicals and Other Additive Agents, Rubber Mold, Com-
pounding Machineries, Mixing Nozzle, etc. T.A. AMERICA CORPORATION
www.taamericacorp.com
SK TEC MEXICANA SA DE CV die castings, die cutting, metal stamping, extruded aluminium, plastic & rubber parts, powder metal,
pag. 99

www.sktec.com.mx adhesives tapes, metal tubing

Company dedicated to stamping, welding (Arc & Spot) and assembly of metal parts
TABLITODO SA DE CV
SMC CORPORATION MEXICO SA DE CV www.tablitodo.com.mx
www.smc.com.mx Design of wooden packaging
Instrumentation, valves and electro valves
TAIGENE MEXICO, SA DE CV
SOLDER DE MEXICO SA DE CV www.taigene.com.tw
99
pag.100

www.gruposolder.com.mx Manufacturing of electronic components

Adhesives and coatings, painting, metallizing systems, machinery and equipment for adhesive
pag.

and coating application TAKAMATSU PLATING MEXICANA SA DE CV

www.tp-mex.mx
SOLUCIONES EN CARROCERIAS SA DE CV Galvanization (general surface treatment)
www.gruposol.com.mx
Design and fabrication of custom racks TANARACK SA DE CV
www.4gingenieria.com
SOLUCIONES EN INGENIERIA Y MANUFACTURA SALAS SA DE CV (SIMSA) Racks, containers, dollies
pag. 143

www.gruposimsa.mx
Metal-mechanical manufacturing with derivation to Precision Machining and Industrial Paileering TDS LEON MEXICO SA DE CV
www.tdsjp.co.jp
SOLUTIONS SINMAN MANUFACTURING SAPI DE CV DC solenoids, solenoid valves, DS solenoid assemblies, coils
www.sinman.com.mx
Short run CNC machining, off-site non-compliant product recovery and off-site tear down, design and TECHNO ASSOCIE DE MEXICO SA DE CV
manufacture of all kinds of material handling devices www.taamericacorp.com
Provisioning Services
SONDERN INGENIERIA Y DISEÑO SA DE CV
pag. 144

www.sondern.com.mx TECNIFLEX ANSORGE DE MEXICO Y COMPAÑIA, S EN CS DE CV

Desing, manufacture and inspection of: fixtures, guages, workholdings, jigs, automation of quality processes, www.tecniflex.biz
3D scanning and inspection solutions Specialists for functional surface systems that protect against corrosion on steel, aluminium and plastic parts
 TECNOLOGIA EN MAQUINADOS HIDRAULICOS SA DE CV Customer Service Center for Injection Molding and Die Casting
www.temahi.com
Machining, dump box and hydraulic liftgates TOYO SANGYO
Automobil Parts, Electrical discharge machining (EDM) in tires
TEGRANT DE MEXICO SA DE CV (SONOCO)
www.sonoco.com TOYO SEAT
Foam products www.toyoseat.co.jp
Anti vibration rubber products
TEKFOR MEXICO SA DE CV
pag. 102

www.amtektekfor.com TOYO TANSO MEXICO SA DE CV

Machinning for transmissions, engines, axles and special applications www.toyotanso.co.jp
Molds, dies and tooling
TEKNOLINEA S.A. DE C.V.
pag. 103

www.teknolinea.com.mx TOYODA GOSEI

Accessories manufactured on a Sequential Stamping Process that forms the piece on a steel, brass or www.toyoda-gosei.com
aluminum sheet. Radiator grills, console boxes and other plastic pieces

TEMAPLAX SA DE CV TOYOTA
pag. 104

www.temaplax.com www.toyota.com
Plastic injection Assembler

TENERIA VARGAS TOYOTA TSUCHO

www.teneriavargas.com www.toyota-tsusho.com
Automotive leather automotive steel pipe processing

TOYOTETSU DE MEXICO S.A. DE C.V.

pag. 107
TENNECO AUTOPARTES WALKER SA DE CV
www.walkerexhaust.com https://ttna.com/
Exhaust systems, muffler, catalyst Stamping, press quenching, welding & asembly

TENRYU SAW DE MEXICO SA DE CV TQ1 DE MEXICO S.A. DE C.V.

pag. 108
www.tenryu-saw.com/en www.timle.com.mx
Industrial Saws with different Diamond-Carbide Teeth Urethane mold seat production and flame laminating products

TERLAN MEXICANA SA DE CV TRANSMORE SA DE CV

www.terlan.com www.transmore.com.mx
Thermoplastic Adhesives Refurbished transmissions

TEVES SERVICIOS SA DE CV TRELLEBORG SILAO S DE RL DE CV

Brake Sensors www.trelleborg.com
Sealing solutions
TEXPROTEC DE MEXICO SA DE CV
pag. 105

www.texprotec.com TRIMECHANICS SA DE CV
Texprotec gropu offers complementary solutions for technical cable protection and coduit braids www.trimechanics.com
Design, manufacturing and manteinances of injection molds
TEXTILES LEON, S.A. DE C.V.
pag. 106

www.textilesleon.com TRITECH AUTOPARTS MEXICANA SA DE CV

Embroidered labels for seats www.deltakogyo.co.jp
Plastic parts for seats and transmissions
THK RHYTHM MEXICANA SA DE CV (THK RHYTHM MEXICANA ENGINEERING SA DE CV)
www.thk.com TROQUELADOS REX SA DE CV
Steering, suspension and transmission parts, brake pads Injection molding, die-cutting, molding

THYSSENKRUPP-BILSTEIN TRRI SA DE CV
www.thyssenkrupp-bilstein.com www.trri.com.mx
Shock absorbers technology Machining of small and large dimensions

THYSSENKRUPP-CAMSHAFT TST MANUFACTURING DE MEXICO S DE RL DE CV (TS TECH)

www.thyssenkrupp-presta-camshafts.com www.tstech.co.jp/english
Camshafts Manufacture of seat parts for automobiles and door parts

THYSSENKRUPP MATERIALS DE MÉXICO SA DE CV (LAGERMEX SA DE CV, SIDCOMEX) TSUBAKIMOTO AUTOMOTIVE MEXICO SA DE CV

www.lagermex.com.mx www.tsubakimoto.com
Cutting of steel sheet for Bodywork Timing drive systems

TIERRA TECH DE MEXICO SA DE CV

pag. 145

U
www.tierratech.com
Industrial ultrasonic cleaning equipment

TIGERPOLY INDUSTRIA DE MEXICO SA DE CV

www.tiger-poly.com
Injection and blow molding UGN
www.ugnauto.com
TOKYO ROKI DE MEXICO SA DE CV Insulating acoustinc and thermal from textile fibers
www.roki.co.jp/english
Fuel and oil filters UREBLOCK SA DE CV
www.ureblock.com.mx
TOLEDO MOLDING DE MEXICO SRL DE CV Polyurethane foam
www.tmdinc.com
HVAC Ducts, Liquid Containers for radiators US FARATHANE SA DE CV
www.usfarathane.com
TOPURA FASTENER DE MEXICO SA DE CV Plastics manufacturing
www.topura.com
Tornillos / Screws U-SHIN AUTOPARTS MEXICO SA DE CV
www.u-shin-ltd.com/english
TOPY MW MANUFACTURING MEXICO SA DE CV Ignition systems, keys, electronic devices, heating systems, locks
www.topyamerica.com
Steel wheels USM DE MEXICO S DE RL DE CV
www.usmfg.com
TOSHIBA MACHINE Axles
www.toshiba-machine.com
 USUI INTERNATIONAL MANUFACTURING MÉXICO SA DE CV
www.usui.co.jp/en
Pipes, fans
Y
YACHIYO MEXICO MANUFACTURING SA DE CV
www.en.yachiyo-ind.co.jp

V
Fuel tank, sunroof, stamping, bumpers, instrument panels

YAZAKI SERVICE, S DE RL DE CV
www.yazaki-group.com
Automobile component manufacturing Company
VBT INDUSTRIAL SA DE CV
www.vbt.mx
YOROZU AUTOMOTIVE GUANAJUATO MEXICO SA DE CV
Wires
www.yorozu-corp.co.jp/en
Suspensions
VCST DE MEXICO S DE RL DE CV
pag. 109

www.vcst.be
Y-TEC KEYLEX MEXICO SA DE CV
Engine and Transmission Gears, Transmission Shafts, Oil pump assemblies, Intermediate Gear Assemblies
www.sumitomocorp.co.jp
Chassis and body
VISCOTEC MEXICO SA DE CV
Seat, roof and door panels textil
YUKEN MEXICANA SA DE CV
www.yuken-ind.co.jp
VOLKSWAGEN DE MEXICO SA DE CV
Surface Treatment
www.volkswagen.de
Engines
YKK MEXICANA SA DE CV
www.ykk.com
pag. 111

VULCAN SILICONE SA DE CV
Silicone and plastic components mainly for industry and home appliances Cierre armando

YUSHIN AMERICA, INC. DIVISIÓN MÉXICO

W www.yushinamerica.com/
Plastic Industry´s Automation Services with Special Robotics

YUSHIRO CHEMICAL MEXICO SA DE CV

WALDASCHAFF AUTOMOTIVE www.yumex.mx
www.wa-de.com Metalworking oils and cooling fluids
Crash management systems
YUTAKA TECHNOLOGIES DE MEXICO SA DE CV
WALORMEX S DE RL DE CV www.yutakagiken.co.jp
www.walor.fr Exhaust systems, torque converter
Aluminum

WALLSTABE & SCHNENIDER DE MEXICO S DE RL DE CV

www.wallstabe-schneider.de
Seals Z
WEBASTO-EDSCHA CABRIO MEXICO SA DE CV (WEBASTO DE MEXICO)
www.webasto.com ZKW MEXICO SA DE CV
Curtains, sunroofs www.zkw-group.com
Specialists in electronic and premium lighting systems
WELDING AND COATING DE MEXICO SA DE CV
www.wcmexico.com
Coatings and Welding, E-coat and Powder Coat

WEWIRE ACAMBARO MEXICO S DE RL DE CV

pag. 112

www.wewire-harness.com
Wheel arch harnesses, injection molding components, wiring harnesses, brake pad wear sensor cable, door
latch cover, brackets, 3D printed prototypes

WHITEHALL INDUSTRIES DE MEXICO S DE RL DE CV

www.whitehallindustries.com
Sunroof systems

WIESAUPLAST PMC DE MEXICO S DE RL DE CV / WIESAUPLAST DE MEXICO S DE RL DE CV

www.wiesauplast.de ; wiesauplast.com.mx
Plastic injection, brake and fuel systems parts

WILLI ELBE MANUFACTURING, S DE RL DE CV

www.willieelbegroup.de
Steering columns, steering components and drive components

WITZENMANN METAL PRODUCTS MEXICO S.A. DE C.V.

pag. 113

www.witzenmann.com.mx
Metalic hoses and bellows

WOLLSDORF MEXICO SA DE CV
www.wollsdorf.com
Manufacturer and supplier of leather for the automotive industry

WORLDWIDE FOAM S. DE RL DE CV
pag. 147

www.worldwidefoam.com.mx
Foam and Elastomeric materials

WÜRTH ELEKTRONIK MEXICO SA DE CV

pag. 114

www.we-online.com
Power inductors
DIRECT
SUPPLIERS
>DIRECT SUPPLIER

212 industrial is a Mexican company, located at Guanajuato

State, starting operations in 2004 satisfying the needs of the
automotive industry grow in the bajio area.

Focus on manufacturing high precision steel parts and other

materials through developing machining processes in CNC
and conventional equipment as well as other innovative
applications like pour-on polyurethane Shore A and Teflon.

PRODUCT
Manufacture high precision steel components and other
materials through machining in CNC and conventional
processes satisfying high, medium, and low volume customer
needs.

** Tier 2 and Tier 3 supplier for automotive and food and

beverage industries.

CAPABILITIES
• CNC machining 40x20” center • Polyurethane shore A molding
• Milling machines process
• Lathe machines • Teflon application
• Black oxide applications

MAIN DESTINATIONS
• MEXICO • USA

212 INDUSTRIAL – MACHINING CERTIFICATIONS

Irapuato, Guanajuato, Mex ISO9001:2015
IMPLEMENTATION

GTO AUTOMOTIVE 42
 >DIRECT SUPPLIER

APG, a subsidiary of Axiom Group Inc., is a plastic injection

company with capacity between 300 to 2,200Tn presses,
2-Shot molding, overmolding, insert molding, welding, and
assembly. Within our services we offer design and building
of tools at our own tool shop.

We are dedicated to providing innovative solutions to a

variety of industries especially to those looking for lighter
and stronger parts at an optimum price. Our comprehensive
engineering focuses not only on designing a strong tool,
but also a robust manufacturing process which guarantees
repeatable quality in every part.

Our Mexican operation started in 2017 with the sponsorship

of our Canadian headquarters and our main customers,
Tesla, VW, Stellantis, Martinrea, Aptiv, Stant and Brose.

PRODUCT
•  Custom injection •  Automotive •  Door panels
molded components assemblies •  Canisters
•  2K Automotive •  Welded assemblies •  Fuel gates
components •  Cowl screens •  Harness guides

CAPABILITIES
• 2 presses 300Tn • 2 presses 1,300Tn • Assemblies
• 1 press 550Tn • 1 press 2,400Tn • Welding
• 2 presses 700Tn • 2K molding
• 2 presses 900Tn • Color Molding

MAIN DESTINATIONS
• USA • CHINA

APG MEXICO AUTOMOTIVE PLASTICS GROUP MEXICO S.A. DE C.V. CERTIFICATIONS

San Jose Iturbide, Guanajuato, Mexico IATF 16949:2016

43 GTO AUTOMOTIVE
>DIRECT SUPPLIER

ARBOMEX is a provider of innovative iron, aluminum & steel solutions for the
automotive, refrigeration, and industrial sectors, among others. Specialized in
camshafts, shafts, and other components for engines, transmission, and chassis
systems for iron products; brackets aluminum; and components of stamping aluminum
& steel.

Arbomex is vertically integrated with foundry and machining, supporting OEMs

products with medium and high volume requirements. It also participates in the
aftermarket segment with its own camshaft brand. The iron foundry plant has three
molding production processes: Lost Foam, Cold Box (stacking), and No-Bake.The
HPDC Aluminum plant has presses ranging from 550 to 1600 tons. Alloys of Al380
& AlSi12 have been frequent.The metal stamping (aluminum, steel) plant provides
complex products for the auto and non-auto industries.

Overall, Arbomex has more than 500 CNC equipment for the machining processes
and with heat treatment capabilities to meet customer requirements, all supported
by metrology laboratories to confirm the highest quality levels.Our R&D department
works closely with customers to provide solutions for light-weighting and developing
new alloys.

MATERIAL / PROCESSES / PRODUCTS

•  Ductile iron (No Bake cast & machining): camshafts, balance shafts, eccentric
shafts, differential carriers, cylinder sleeve, crankshafts; specializing in Automotive,
Refrigeration and Industrial products.
•  Aluminum & Zamak (HPDC cast & machining): base brackets for side mirror,
battery, cover, engine, housing; specializing in Automotive products.
•  Steel & Aluminum (Stamping & post processes): brackets: steering system, shock
absorber; cover: airbag system; housing: motor, brake system, cooling system, wiper
system, among others; specializing in Automotive products.
•  Ductile iron (Lost foam cast & machining): suspension & chassis brackets, water
pump, axle sleeve.
•  Steel (machining): camshafts.

CAPABILITIES
•  Assemblies, spin ring test (valvetrain).
•  Mold Tool (No-Bake & Lost Foam) – design & manufacture.
•  Stamping presses with 3D transfer system (540 to 800 tons) and automatic coil feeder
equipment (150 to 440 tons).
•  CNC equipment, Induction heat treatment, Metrology and Metallurgical Lab.
•  Additive manufacturing (PLA, ABS, stainless steel, among others).
•  CAD: NX, Solid works, 3D scanning (inverse engineering).

ARBOMEX S.A. DE C.V. CERTIFICATIONS

Celaya, Guanajuato FORD Q1
IATF 16949:2016
ISO 14001:2015

GTO AUTOMOTIVE 44
 >DIRECT SUPPLIER
ALUMINUM – HIGH PRESSURE DIE CASTING

Arbomex HPDC is a North American-based supplier with

over 30 years of experience providing aluminum and zamak
products for the global automotive, gas and electrical
industrial sectors.

The aluminum business is primarily focused on supplying

advanced aluminum components for propulsion systems,
brackets, gas flowmeter, electric connectors and appliances
segments. Also offered mold and part designs and CNC
machining.

CAPABILITIES
•  Computer assisted design (CAD: NX & SolidWorks)
•  Tooling design, permanent feedback during tool design
and manufacturing phase
•  Complex product manufacturing (thin walls up to 1.5 mm,
multiple cores)
•  Additive manufacturing (3D printing)
•  HPDC equipment from 550 Ton to 1600 Ton; enabling to

WE
produce parts from 0.1 kgs up to 20 kgs weight.
•  Testing capabilities: CMM, metallurgical analysis,
spectrometer and 3D vision equipment PROVIDE
•  Multiple aluminum alloys SOLUTIONS
•  In-House secondary CNC machining, shot blasting, tumble FOR:
finishing, outsourced coating and painting
•  Structural and cosmetic Zamak applications

ARBOMEX S.A. DE C.V. CERTIFICATIONS

Celaya, Guanajuato IATF 16949:2016
ISO 14001:2015

45 GTO AUTOMOTIVE
>DIRECT SUPPLIER

ARYPSA is a Mexican company founded in 2015, focused

on satisfying the needs of our customers, through the deve-
lopment of solutions that involve manufacture components.

We are committed to manufacturing high precision parts

and creative proposals for solutions for machining and
processing of steel and other materials, reliable and
according to the needs of metal mechanic industry.

Level of Chain: Tier 2 supplier for automotive industry.

PRODUCT
We produce and manufacture components through an
integral process

CAPABILITIES
• Laser cut

• Stamping
• Blanking
• CNC Machining
• CNC bending

• Laser engraving
• Pipe bending

• CNC turning
• CMM laboratory

• Mig Tig Welding

• Robot Welding Aplication

MAIN DESTINATIONS
• United States of America • Mexico
• Canada

ARYPSA MANUFACTUAS S.A. DE C.V CERTIFICATIONS

Leon Guanajuato IATF 16949:2016
ISO 9001-2015

GTO AUTOMOTIVE 46
 >DIRECT SUPPLIER

ATG Additive, is a company specialized in additive

manufacturing, we design, simulate and manufacture parts
with which we offer new solutions for different sectors and
industries using new and advanced technologies that help
improve profitability in companies. We currently implement
additive manufacturing in various types of materials such as
Metals, Polymers and Ceramics.

PRODUCT
All the products we manufacture are unique pieces with high
specifications determined by our customers.

CAPABILITIES
• Main: Metal Additive Manufacturing Machine M290
• Secondary: Machining and Thermal and Surface
Treatments.

Our process has the ability to manufacture any type of metal

complex part within the following dimensions: x, y, z (250 mm
x 250 mm x 325 mm).

MAIN DESTINATIONS
•  U.S •  SPAIN
•  CANADA •  GERMANY
•  MIDDLE EAST •  COLOMBIA

ATG ADDITIVE MANUFACTURING, S.A.P.I. DE C.V. CERTIFICATIONS

Leon, Gto., Mex. WE ARE IMPLEMENTING
TWO CERTIFICATIONS
WITHIN OUR COMPANY
AS9100 REV. D AND
ISO9001:2015

47 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Auto Plastek is a Tier 2 company in the Auto industry and Tools.

Our operations began in 2011 with brand new equipment with
World Class Technology. We have worked collaboratively for
a long period of time with most of the relevant brands in the
automobile industry. Our management and quality systems
fulfill and exceed the auto industry expectations. We have
equipment from 50 to 1200 tons.

Customers:
ZKW, Webasto, Air-thermal, Eissmann, TitanX, Grupo
Antolin, Mekralang, SMP, Novares, Nicro-Bolta, among
others.

Major end-customers:
Audi, VW, FCA/Jeep, GM, Ford, Navistar, Tesla, Volvo, BMW,
ISUZU, Lexus, Mercedes Benz.

PRODUCT
•  Interior – Trim, dashboard, door panels, console
•  Exterior – spoilers, grills
•  Molded parts to-be-chromed and brackets

CAPABILITIES
• Injection Molding 50, 90, 120, 160, 230, 240, 250, 360, 390, 450, 500,
600, 800 and 1200 Ton.
• 2K injection molding 390 Ton.
• Mold developing capabilities. We have developed more than 100 molds
for Audi, VW, Isuzu, Mercedes Benz, Volvo, FCA. (1 and 2K).

MAIN DESTINATIONS
•  USA •  MEXICO

GRUPO GONORMA DEL BAJIO S.A.P.I. CERTIFICATIONS

Irapuato, Guanajuato, Mexico. CCC
IATF 16949

GTO AUTOMOTIVE 48
 >DIRECT SUPPLIER

Grupo Azpiaran is the result of the merger of several small companies

with long industrial tradition, bringing together the experience and know-
how from all of them. The Group is based in the Basque Country (Spain),
an area with long standing industrial, commercial and financial activity, in
which an important automotive industry has grown in the past few years,
to become one of the top of the world in terms of competitiveness and
innovation.

The Group Azpiaran is specialized in metal stamping technologies with

progressive die tools, Fine Blanking, and complementary technologies.
These include: robotized stamping cells, welding cells, assembly cells
and machining cells.

Our goal is the full satisfaction of our customers needs and expectations,
manufacturing products and giving services with the highest quality, on
time and with lower costs to follow our standard of being the “best in
class”.

We are an internationally oriented Group, with production plants in

Spain, Poland and Mexico and sales throughout the world.
PRODUCT
•  Shock Absorbers •  Pedals
•  Brakets •  Seats
•  Chassis •  Security Systems
•  Closure Systems

CAPABILITIES
•  Stamping up to 800tns •  Fine blanking
•  Assembly •  Zinc and e coat treatments
•  Welding Technologies (outsourcing)

MAIN DESTINATIONS
•  United States of America •  Mexico
•  Europe •  Sudamerica

PLANTA AZPIARAN MEXICO CERTIFICATIONS

Celaya, Guanajuato, Mexico IATF 16949

49 GTO AUTOMOTIVE
>DIRECT SUPPLIER

CENTRACORE is a US company with locations in St. Clair,

Michigan and Apaseo el Grande, Gto., Mexico.

At Centracore, we specialize in aluminum high pressure

die casting and the production machining and assembly of
castings, forgings and extrusions in aluminum, iron and steel.

PRODUCT
Centracore manufactures a variety of Chassis, Powertrain,
Driveline and Structural components including: NVH and
FEAD Brackets, Housings, Covers, Hangers, Tensioners,
Heat Sinks, Electrical Connectors, Cross Over assemblies,
Knuckles, Upper and Lower Control Arms and a variety of
other critical components.

CAPABILITIES
• Aluminum high pressure die casting of parts from 20 g
to 2.5 kg.
• Production machining and assembly of castings, forgings
and extrusions in aluminum, iron and steel.
• Engineering services including part and process
development and rapid prototyping.

MAIN DESTINATIONS
•  USA •  MEXICO

CENTRACORE DE MEXICO LLC / CENTRACORE COMPANY DE MEXICO S. CERTIFICATIONS

DE R.L. DE C.V. • USA Operations: IATF16949
Apaseo el Grande, Guanajuato / and ISO 14001 registered.
Saint Clair, MI • Mexican Operations: ISO
9001:2015, IATF registered
by Q2-2020 & ISO14001 by
Q2-2020

GTO AUTOMOTIVE 50
 >DIRECT SUPPLIER

Our Company has 40 years on the market bringing our

experience to produce solutions into the Industry.

PRODUCT
• Industrial Tube Fittings, Adapters and Equipment
• Hose, Fittings and Equipment
• Hydraulic Hoses, Fittings and Equipment
• Parker Pneumatic
• Pneumatic actuator product
• Compact pneumatic cylinders
• Brass, composite and Thermoplastic Fittings and Valves
• Air preparation Products: Filters, regulators, lubricators
• Parflex Thermoplastic & Fluoropolymer Products Hose,
Tubing, & Fittings
• Quick Coupling Products

CAPABILITIES
Products for the automotive industry: automotive and industrial belts,
hose and fittings:

• High, medium and low pressure

• Valves
• Hose clamps
• Conveyor belts
• Lubricants
• Tubing and fittings metric and standard sizes
• Automation equipment
• Hydraulic and pneumatic
• Industrial hoses
• Lubrication fittings

BAREFA S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico

COMANHI S.A. DE C.V.

Leon, Guanajuato, Mexico

51 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Racks: Consmart is a manufactures company for all types of racks

in structural steels and aluminum.

Cast: We are specialist in aluminum cast manufacture, used as a

template for plastic painting process; bumper, fender flare and any
type of car components.

Stamping: Metal sheet stamping for aluminum, steel and high-

strength steels small parts, with thicknesses less than 5mm.

PRODUCT
• Racks: Design racks for all kinds of materials.
• Cast: Design, manufacture and melting for any type of
casting used in painting process.
• Stamping: New launching or business transfer (Die design
and manufacturing).

CAPABILITIES
Press Machines:
1) Sutherland: 275ton.
Stokes per minute: 20-40
2) Aida: 275ton.
Stokes per minute: 20-35
3) Richter: 300ton.
Stokes per minute: 22

Capacity 7.5 millons hits per year

INGENIERIA EN MANTENIMIENTO INDUSTRIAL Y CONTRUCCION CERTIFICATIONS

COSMART S.A DE C.V. ISO 9001:2015
Irapuato, Guanajuato FM 738908 BSI

GTO AUTOMOTIVE 52
 >DIRECT SUPPLIER

CONTOUR is a full-service thermal hardening system

manufacturer, specializing in induction hardening systems,
metal finishing services, commercial processing, and
application development work.

During the fall of 2007 Contour created a satellite location in

Silao, Guanajuato, Mexico. Our Mexico facility also includes
purpose-designed utilities, computerized gear inspection
equipment, sediment lab and a complete metallurgical
laboratory to support our customers around the world.

PRODUCT
• Provider of engineered low distortion thermal processing
solutions. 
• Maintenance to coils and heat treatment filtration Systems.
• Metal finishin services such as washing and shoot peea.

CAPABILITIES
Over 200,000 treated parts per month.

MAIN DESTINATIONS
•  United States of America •  Mexico

CONTOUR HARDENING OPERACIONES S. DE R.L. DE C.V. CERTIFICATIONS

Silao, Gto. Mexico IATF 16949:2016
CQI-9 COMPLIANT

53 GTO AUTOMOTIVE
>DIRECT SUPPLIER

We are a CNC and conventional machining company. We

manufacture high-pressure tools from 1 piece to serial
production.

Company with 30 years of experience. 100% Mexican

Company.

Major customers GKN Automotive, Schaeffler Group,

PEMSA, Forjas de Celaya and RPK.

PRODUCT
Tools for production lines and Tier 1 parts, CNC turning, CNC
milling, erosion thread and laser welding.

CAPABILITIES
• CNC turning up to 21”x 26” (533 x 660 mm)
• CNC milling up to 40”x 20”x 25” (1016 x 508 x 635 mm), 40
taper
• Wire cutting up to 9”x 13” (250 x 350 mm). Thickness 12” (400
mm)
• Cylindrical grinding up to 6” (160 mm) length 800 mm (31”) flat
grinding 6” x 18” (152 mm x 457)

MAIN DESTINATIONS
•  USA •  Canada

COTROMMA S.A. DE C.V. CERTIFICATIONS

Celaya, Gto., Mex. ISO 9001:2015,
CERTIFICATION NUMBER
QAC2017-016/01

GTO AUTOMOTIVE 54
 >DIRECT SUPPLIER

DC AUTO PARTS with over 61 years old (1961) is a 100%

Mexican company highly integrated, with R & D labs, chemical
and physical testing labs for raw material and polymers.

We have the first place in the Mexican market introducing graphite

material for all the head gaskets, exhaust manifolds and the most
complete line from rings and gaskets for the exhaust system.

In 2009, DC acquired Rol Gaskets/Corteco, during 2010 acquired

the pistons manufacturing under DC Pistons brand. Nowadays,
we have become DC Autoparts Division, with distinction of cutting
edge technology, design and innovation.

PRODUCT
• Gaskets (Head Gaskets Graphite or MLS) Exhaust Manifold rings and
exhaust flat gaskets (Manufactured in expanded graphite), intake and
various gaskets (covering ASTM standards), Rubber.
• Gaskets and Seals.
• Pistons.

CAPABILITIES
Development and manufacture of tooling, chemical and physical testing
laboratories, raw materials evaluations, mix of polymeric compounds and
the largest gasket line in the market as well R&D, Labs. Design of new
products and manufacturing of tooling are generated from CAD CAM tools
to assure consistent quality parts along all production process.

MAIN DESTINATIONS
• United States of • Australia • Venezuela
America • Guatemala • Bolivia
• Canada • Peru • Chile
• Puerto Rico • Honduras • Ecuador

MANUFACTURAS DIVERSAS S.A. DE C.V.

Leon, Guanajuato, Mexico

55 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Global leading company founded in 2017, dedicated to develop,

manufacture, sale, and distribute specialized products, Carbon
Steel Wires, and Alloyed Steel Wires for the automotive,
aerospace, manufacturing, and heavy-duty industries. We are
a fully integrated steel manufacturer focused on providing a
wide portfolio of highly specialized products that suit the needs
of each of the industries we serve.

We operate advanced technology and equipment in our

laboratories, which carry out specialized tests to determine:
• Hardness, tension, and compression
• Chemical elements through an Ark-Spark metal
spectrometer
• Metallographic analysis through a digital microscope

PRODUCT
Carbon Steel Wires for the •  Galvanized carbon steel wires
manufacture of auto-parts such as: •  High carbon wires
•  Low and Medium carbon wires •  Music wires
with and without coating for cold •  CD Bar
forging and wire forms up to •  Wire supply according to your
29mm specifications
•  CHQ steel wire
•  Straightened and cut to size
steel wire

MAIN DESTINATIONS
•Mexico •Europe
•United States •Central America
•Canada

DEACERO SUMMIT SAPI DE CV CERTIFICATIONS

Villagran, Guanajuato Mexico IATF 16949
ISO 9001:2015
GLOBAL STANDARD: ASTM, JIS,
ISO, DIN, BS, IS, API, EN, AS, GOST

GTO AUTOMOTIVE 56
 >DIRECT SUPPLIER

Mexican owned Company founded in 1978, located in the

center of the country and with the capacity and technology
to manufacture screw, bolts and any special fastener
always compliying with the standards and requirements
of our customers such as: Hella, Mann-Hummel, Johnan,
Narmx, Btcino, Whirlpool and Italika.

PRODUCT
Bolts, fasteners and special pieces, based on cold forminng,
Rolling, heat treatment and severall plating techniques.

CAPABILITIES
With the capacity to produce around 90 million pieces per
month. Diameter 2 to 13 mm., length 4 to 150 mm.

MAIN DESTINATIONS
• United States • Middle East
• Canada • South America

BENEFICIADORA DE ALAMBRES Y METALES S.A. DE C.V. CERTIFICATIONS

Irapuato, Gto. Mexico IATF 16949

57 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Dicentral has more tan 40 years of experience working in

the steel industry.

We are provider of wire products in the automotive and

appliance industry.

We are committed to the customer to give them the best

option costs by offering a personalized service throughout
the supply chain in sales and after sales.

PRODUCT
• Electrowelded
• 2D and 3D wire forming
• Powder coating
• Steel wire forming
• Electrowelded Steel Mesh

MAIN DESTINATIONS
• United States of America
• Canada
• South America

DISEÑO CENTRAL, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico IATF 16949

GTO AUTOMOTIVE 58
 >DIRECT SUPPLIER

We are a Mexican company belonging to a group PLAYCLUB with

more than 20 years of experience, we offer services oriented to
manufacturing and engineering, with an approach based on the
innovation of processes in the hands of our specialized staff to
comply with the requirements and industry standards.

Our facilities are in “Puerto Interior” industrial park in Silao,

Guanajuato. We have more than 10,000 m2 of production plant with
high-tech machinery for metal-mechanical manufacturing.
PRODUCT
• Electrostatic painting • Sheet bending CNC
(Powder coating) • Manual welding
• Laser cut CNC • Tube bend
• Punching CNC • Rolled sheet
• Machined CNC • Tube Rolling
• Plasma cutting CNC • Flat bet printing
• Routed CNC

CAPABILITIES
LASER CNC: Fiber optic technology 4’ x 10’ cutting area in different
gauges (22 gauge sheet to ½”.
PUNCHING CNC: Flat bed of 4’ x 8’ area.
PLASMA CUTTING CNC: Steel cutting up to 3/4” thick. Flat bed
for 4’x 10’area.
ROUTER CNC: Flat bed for 4’ x 8’ area.
LATHE CNC 5 AXIS: With the capacity to machine: turning, facing,
boring, threading, grooving, drilling, knurling, conical turning,
parting, flattening, among others. With material clamping up to 3”
diameter.
MAIN DESTINATIONS
• MEXICO • CANADA
• USA

DISPPLE S.A DE C.V CERTIFICATIONS

Silao, Guanajuato, Mexico ISO 9001:2015

59 GTO AUTOMOTIVE
>DIRECT SUPPLIER

ECENARRO is a cold forging specialist, a technology which

is combined with machining processes. Our aim is to give
a global competitive response for the industrialization of
complex parts for the automotive sector.

Based in our values of closeness, flexibility and commitment

we face new challenges and we have worked day in day out
in our 80 year history.

ECENARRO was born in 1940 in Europe and started its

operations in 2015 in Mexico, delivering to the main Tier 1
and Tier2 customers in 4 continents.

PRODUCT
• Ball pin • Clamp screw
• Cylinder head bolt • Ogival screw
• Wheel bolt • Standard parts
• Wheel key • Collaborative developments
• Bushing • Ball Stud
• Complex parts • Guide Pin

CAPABILITIES
Ecenarro Mexico offers the main manufacturing processes such as 6 steps
cold forging machine, CNC machines, thread Rolling, 100% inspection
machines and a fully equipped laboratory.

MAIN DESTINATIONS
• Worldwide

ECENARRO DE MEXICO S DE RL DE CV CERTIFICATIONS

Celaya, Gto., Mexico
ISO 9001
IATF 16949
ISO 14001

GTO AUTOMOTIVE 60
 >DIRECT SUPPLIER

Elay Group is a Certificate global company leader in fine

blanking technology, Our quality and innovation guarantees
our customer´s satisfaction.

We have over 50 years in the Fine Blanking Market offering

products of High performance within the automotive industry.

We have 3 production plants (Mexico, Europe and Asia) to

cover the global market.

PRODUCT
Fine Blanking Parts: •Breaking
•Transmision •Closure and Seating
•Security Systems parts
•Car Body

CAPABILITIES
Fine Blanking, tooling design and manufacturing, Fine Blanking
Production with presses range of 320 to 1,200 T.
Integrated processes: Bainitic Tempering, Nickel-Chrome
Coating,grinding, belt-sanding, deburring, bending, Assemblies,
D Grinding,plastic overmolding and external Heat treatments.

MAIN DESTINATIONS
•United States •China
•Canada •Brazil
•Europe

CELAY S.A. DE C.V. CERTIFICATIONS

Celaya, Gto. Mexico ISO 9001
IATF 16949
ISO 14001
C-TPAT
OSHAS 18001

61 GTO AUTOMOTIVE
>DIRECT SUPPLIER

ESTAMP contributes to customer success by providing

innovative solutions in thermal and thermo-acoustic
insulation helping automakers build successful global
brands.

Manufacturing more than 22 million heat shields each

year, we are a leader in our field with a strong presence
in all three auto industry regions: Europe, Asia and North
America.

Located in San Miguel de Allende, Mexico since 2017

Customers: VW, Kautex, Plastic Omnium.

PRODUCT
• Underbody Heat Shield
• Tank Head Shield
• Engine Heat Shield
• Exhaust Capsulate
• Heat Shield PHEV

CAPABILITIES
• Sales and Products Management
• Development and Innovation
• Process and Tooling Design
• Manufacturing Development prototypes
º

ESTAMP AUTOMOTIVE MX, S.DE R.L.DE C.V

San Miguel de Allende, Guanajuato, Mexico

GTO AUTOMOTIVE 62
 >DIRECT SUPPLIER

FRAENKISCHE INDUSTRIAL PIPES is the leader in the design,

manufacturing and marketing of corrugated plastic pipe systems.

• Tier 1 and Tier 2 Supplier for Automotive and Industrial

Customers
• Duct systems suitable for carrying fluids (fuel, air, water) and
Cable Protection.
• Mexico Facility opening in 2012.
• Origin of the investment: German
• Main Customer: Principal OEMS and T1 Companies in the
Automotive Industry
PRODUCT

Corrugated tubes and corrugated tube systems such as:

• Fuel lines battery
• Venting systems • Vacuum lines
• Secondary air lines • Battery ventilation and
• Washer systems coolingsystems
•Vent systems crankcase • Secondary air lines

CAPABILITIES
• Extrusion • Injection Molding
• Thermoforming • Blow Molding
• Smooth tube production • Knitting
• Assembling • Surface coating

MAIN DESTINATIONS
• United States of America • Russia
• Brazil • Czech Republic
• Argentina • Germany

FRAENKISCHE INDUSTRIAL PIPES MEXICO S.A DE C.V. CERTIFICATIONS

Silao, Gto. Mexico
IATF 16949
ISO 9001
ISO 14000

63 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Japanese capital company stablished in the city of Valle de

Santiago, Guanajuato, México in 2016.

With more than 70 years of experience on the design,

development & manufacturing of electronical components for
the automotive industry, 51 facilities and more than 50,000
associates around the world, Furukawa Group is always
ready to support your local and global projects electrification
needs with the best quality, efficiency and service.

PRODUCT
Wiring Harness, Steering Roll Connectors, Junction Boxes with Semi-
conductor Power Devices, Flat Cable Applied Products (Sliding Door
Harnesses / Long Slide Seat Harnesses), 24GHz Short Range Multi
Mode Radars, High Voltage Harnesses for Electric Vehicles, High Voltage
Junction Boxes / Molded Busbar for Electric Vehicles, Connectors &
Terminals.

CAPABILITIES
Production: Automatic Cut & Crimping, Inductive System, Plastic Injection,
Stamping, Vertical Integration Assembly.

Logistics: KSK Delivery, Secuence Delivery (JIT).

MAIN DESTINATIONS
• USA •Europe
•CAN •Latin & South America
•MEX •Asia

FURUKAWA AUTOMOTIVE SYSTEMS MEXICO S.A. DE C.V. CERTIFICATIONS

Valle de Santiago, Guanajuato IATF 16949

GTO AUTOMOTIVE 64
 >DIRECT SUPPLIER

World-Class Leader in Metal Stampings, Injection Molding

and Advanced Contract Manufacturing Applications.

Gobar Systems Inc. is a Turnkey Solutions provider

in Contract Manufacturing with more than 30 years of
Experience, specializing in Metal Stampings, Injection
Molding and Automated Assembly.

PRODUCT
30 YEARS OF EXPERIENCE
• Metal Stamping.
• Injection Molding.
• Contract Manufacturing.
• Automatic Assemblies.

CAPABILITIES
• Tool and Die Making
• Product Design
• Product Development
• Finishing
• Laser Scanning.
• 3D Printing.
• Resistance Spot
• Welding, MIG & TIG

MAIN DESTINATIONS
• Mexico • Japan
• United States of America • Thailand
• South Korea • Vietnam
• China • Turkey

GOBAR SYSTEMS INC. CERTIFICATIONS

Celaya, Guanajuato. • USA Operations: IATF16949
and ISO 14001 registered.
• Mexican Operations: ISO
9001:2015, IATF registered
by Q2-2020 & ISO14001 by
Q2-2020

65 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Honda Lock Mexico was founded in 2012 and started its

operation in 2014 as a subsidiary of Honda Lock Mfg. Co.,
Ltd which is a tier 1 auto parts manufacturer in Japan with
more than 50 years of experience. Honda Lock has engaged
with innovative and integrated production lines including
molding of the components, paint of plastic injection parts,
and assembly of auto parts.

PRODUCT

•  Key sets
•  Outer handles
•  Door mirrors etc.

CAPABILITIES
• Die casting: 6, 25, 150 ton
• Plastic Injection: 75, 100, 180, 280, 350, 550 ton
• Paint: Plastic Paint
• Assembly: Key sets, Outer Handles, Door mirrors

MAIN DESTINATIONS
•  United States of America
•  Brazil
•  Japan

HONDA LOCK MEXICO S.A. DE C.V. CERTIFICATIONS

Silao, Gto., Mex. ISO 9001-2015
IATF IN PROCESS

GTO AUTOMOTIVE 66
 >DIRECT SUPPLIER

INALFA ROOF SYSTEMS is one of the world’s biggest providers of vehicle

roof systems. Inalfa develops and manufactures sunroofs and open roof
systems for the major OEM’s in the automotive industry.
Inalfa Roof Systems is a reliable engineering and assembly partner. The
Inalfa global footprint helps to leverage its revenues from customers and its
relationships to suppliers. Due to a global presence Inalfa is always in close
proximity to its customers’ production lines.
Inalfa stands for innovation, technological competence, quality and a
pleasant car driving experience.

PRODUCT
Inalfa Roof Systems supplies a full range of vehicle roof systems for the
global car and truck industry.These roof systems can be assembled both
as bottom-loaded systems and as top-loaded systems in a vehicle in the
production line of the OEM.

The roof systems from Inalfa can be divided into six categories:
• Insliders • Fixed panels
• Topsliders • Sunblinds
• Exterior sliders • Truck hatches

CAPABILITIES
Available knowledge and experience enables Inalfa to develop and
install production lines in facilities specifically adapted to meet all
customer requirements.

Hardware and capital equipment needed to assemble and inspect the

Inalfa roof systems are purchased worldwide from strategic supply
partners. Component hardware is assembled into complete roof
modules at the Inalfa manufacturing facilities. Sub-assemblies include
the entire structural frame and mechanism, as well as exterior panels
and sealing systems, electronic control and power units and also
interior finish and trim components.

MAIN DESTINATIONS
• USA • Spain
• Canada • Mexico

INALFA ROOF SYSTEMS CERTIFICATIONS

Irapuato, Guanajuato Mexico ISO 14001:2015
(FEB 2022 - FEB 2025)
ISO 45001:2018
(MAY 2022 - MAY 2025)
FORD AWARD (DEC 2021)
IATF 16949 (AUG 2021)

67 GTO AUTOMOTIVE
>DIRECT SUPPLIER

KAMAX group is the World´s leading manufacturer on

the Automotive Industry for high-strength fasteners and a
competent partner for the development and production of
complex cold-formed parts. We set standards in the areas
of innovation, quality, and profitability. In reliable and long-
term partnerships with our customers, we jointly develop
custom solutions for the special requirements of the future.

Our recipe for success: Finding solutions today for the

challenges of tomorrow.
PRODUCT
KAMAX manufacturers fasteners & complex cold formed
products for the automotive & heavy truck industry.

•  Connecting rod bolts

•  Cylinder head bolts & bearing cap fasteners.
•  Hex flange bolts, tie rods, ball studs and other safety fasteners.

CAPABILITIES
• Size: M6 to M22
• Length: 10mm to 350mm
• High strength martensitic fasteners with property class 8.8, 9.8,
10.9 and 12.9
• High strength bainitic fasteners with property class 12.8U,
14.8U, 15.9U, 17.8U
• Heat Treatment Service

MAIN DESTINATIONS
• United States of America • Mexico
• Brazil • Argentina

KAMAX MEXICO S DE R.L DE C.V. CERTIFICATIONS

Leon, Gto., Mex. IATF
ISO 14000

GTO AUTOMOTIVE 68
 >DIRECT SUPPLIER

On the road, quality counts. Major international automotive manufacturers

and their suppliers know that LTC can be counted on for consistent
excellence in manufacturing, components, and assemblies. For more
than almost half a century, LTC Roll and Engineering has been Mexico
& southeast Michigan’s center for roll forming excellence. We started
as a supplier of outstanding custom tooling, providing precision-built roll
forming tools that helped put generations of vehicles on the road. We
pioneered the development of innovative tools to meet the need of new
high-strength, lightweight materials. We built durable, dependable parts
that saved money, maintenance, and lives. And we became the trusted
partner that OEMs, their suppliers, building products firms and alternative
energy companies call to take on their toughest production challenges…
and deliver! It’s what we’ve always done and it’s what we still do today.
We make parts that companies count on – because drivers count on them
where they matter most.

PRODUCT
• Bumper Beams • I/P Beams • Seal Retainers
• Cross Sills • Rear Window • Seat Tracks
• Door Frames Reinforcements • Sliding Door Tracks
• Floor Reinforcements • Rocker Panel • Tubular Products
• Frame Cross Assemblies • Stampings
Members • Roof Bows and
• Glass Channels Headers

CAPABILITIES
It takes a lot of expertise to put a vehicle on the road – and keep it there.
LTC’s metalforming mastery plays a vital role in the safety, efficiency,
durability, and functionality of the cars and trucks that consumers depend on
most. Chances are good that our parts are in the vehicle you’re driving right
now, reliably doing their job day after day. Rocker panels and roof bows, seat
tracks and stampings, floor reinforcements and frame cross members: LTC
rolls, stamps, welds, cuts, and assembles them all to the highest standards
of quality and precision.

MAIN DESTINATIONS
• USA

LTC ROLL & ENGINEERING DE MEXICO S DE RL DE CV        CERTIFICATIONS

Apaseo El Grande, Guanajuato IATF 16949

69 GTO AUTOMOTIVE
>DIRECT SUPPLIER

MACAUTO was founded in 1979 in Tainan, Taiwan; we have

being serving the Automotive Industry for 38 years.

MACAUTO Mexico production plant established in Leon,

Guanajuato, Mexico started operations in 2015

PRODUCT
• Roof Sunshade Systems
• Wind Deflector Solutions
• Rear Windows Sunshades
• Luggage Cover Systems
• Side Window Sunshades
• Divider Nets Systems

CAPABILITIES
We have proven experience in the development and production of in-
house made tooling, from injection molds to complete inspection gauges.
A ‘state of art´ toolmaking shop and our employees´ unrivalled knowledge
and skills ensure we guarantee excellent products.

Our advanced materials development and engineering excellence

provides solutions for our customers that help build and enhance many
of the world’s luxury auto brands.

MACAUTO MEXICO SA DE CV               CERTIFICATIONS

Leon Guanajuato, Mexico IATF 16949
ISO 14001

GTO AUTOMOTIVE 70
 >DIRECT SUPPLIER

MAQUITEC is a Mexican Company Founded in 1974 and

located in Leon, Guanajuato, manufacturing Aluminum
Molds for the shoes industry and open operations as
Injection Molding company in 2009 for the industrial field
and starting manugacture automotive molded parts on 2013
as Tier 2 and 3.

MAQUITEC owns top technology and high quialified

personnel, in ordet to offer the best quality, service and cost
to achieve customer requirements.

PRODUCT
• Molded plastic automotive parts
• MAQUITEC has experience with ABS, PVC, PC-ABS,
PMMA, Nylon (PA), Santoprene, Polypropylne, TPO and
TPE
• Machining
• Plastic injection molding maintenance

CAPABILITIES
Production Area Facilities are 3500 sqm and it counts with 14
machines with capability between 80 to 750 Ton.

5 & 3-Axis CNC Machining, Swiss type lathe, CNC lathe

MAIN DESTINATIONS
• NAFTA AREA

MAQUINADOS TECNOLOGICOS DEL CENTRO S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico IATF
DQS

71 GTO AUTOMOTIVE
>DIRECT SUPPLIER

The Marquardt Group has become one of the world’s leading

mechatronics experts since its founding in 1925. Today,
Marquardt employs more than 10,200 employees across 21
global locations. We are continuing to grow and advance the
future of mechatronics, electro-mobility and digital networking.

PRODUCT
Switches, Sensors, Controls

CAPABILITIES
• 5 SMT lines
• 3 Milling, 3 action pin, 7 ICT, 1 OLA, 1 PROMIK
• 44 molding machines
• 55 Assembly lines

MAIN DESTINATIONS
• US
• GERMANY
• CANADA

MARQUARDT MEXICO S DE RL DE CV CERTIFICATIONS

Irapuato, Gto. IATF:16949
ISO9001
ISO14001
ISO27000
ISO26000
CTPAT

GTO AUTOMOTIVE 72
 >DIRECT SUPPLIER

MECANOMATIC is a precision part machining company with

32 years of experience, we have 1 facility in Mexico  and 1 in
Guanajuato State.

We work with the latest technology and continuously improve

our processes to offer our customers the best quality. Our
extensive experience in the machining of automotive and
electrical industries are at your disposal. 

PRODUCT
Our range of products varies from parts such as inserts, bolts,
bushings, sleeves, washers, contacts, spacers, chaplets, tripping
shafts, interlock pins, rivets, end bells, etc.

Our main processes are CNC milling, CNC turning, turning on

multi spindle automatic lathe and single spindle automatic lathe.

CAPABILITIES
Our CNC equipment have different manufacturing capabilities
from 2-axis 1 spindle up to 9 axes two spindles with and without
live tools with capacity of 2mm to 800mm in turning. In the field of
CNC milling we have machines with 3 th, 4th and 5 th axis, one
or two spindles with fixed table or pallet.

MAIN DESTINATIONS
• United States of America • Brazil
• Canada • Thailand
• France

MECANOMATIC GTO, S.A. DE C.V CERTIFICATIONS

Apaseo el Grande, Guanajuato IATF 16949:2016

73 GTO AUTOMOTIVE
>DIRECT SUPPLIER

We design and manufacture all types of rubber seals,

gaskets, precision machining, low manufacturing for all types
of applications for OEM and MRO equipment.

Under the ASTM, DIN, ANSI, NADCAP, JIS, Etc. standards.

Applicable in all types of industries with excellent quality. To
mention some as: Seals, Sealing Systems, Gaskets, Joints
Grommets, Bumpers, Orings, Dichtung, Etc

Our experience has led us to develop Special Artifacts in a

wide variety of Industries such as Automotive, Iron and Steel,
Plastic, Energy, Manufacturing, Providing sealing solutions
that are used in all types of applications.

PRODUCT
• Seals, Sealing Systems, Gaskets, Gaskets, Grommets, Bumpers,
Orings, Dichtung.

• Liquid Silicone Injector and Rubbers such as Nitrile, Neoprene,

EPDM, Viton, Aflas, Kalrez, PTFE, SBR, Injection Engineer Plastics
products as Nylon, Nylon 6/6, Nylon FV, Pom.

• CNC machines with 0.005 micron pressure for high pressure

machining

CAPABILITIES
• CNC Machining 3 Axis High Acurrancy 0.005 micras,
• Lathe CNC Inclined Beds
• Injection Units for Rubbers.
• Injection Unit LSQ Liquid Silicone.
• Machining center 8 axes multitasking

SELLOS ESPECIALMENTE DISEÑADOS SA DE CV CERTIFICATIONS

Celaya, Guanajuato ISO 9001-2015
MARCA GTO

GTO AUTOMOTIVE 74
 >DIRECT SUPPLIER

METAGRA MEXICO is the mexican subsidiary of spanish

company Metagra Group. The matrix of Metagra Group in
Spain (Metagra Bergara) have a broad experience in the
automotive market for more than 50 years, being considered
as a reliable provider by important European global automotive
customers. Core business of the Group is cold forming.

Main direct customers of the Group are Robert Bosch Brake

Systems, Fuji Autotech, Peugeot & Citroën, Renault, Volvo
Trucks, Daimler, Valeo Electric Systems, etc.
PRODUCT
Traditionally Metagra Group got specialized in the manufacturing of technical
cold formed parts. With the opening of the subsidiary in Mexico, the range
of searched products for this technology should apply for the whole diversity
of cold formed parts, both technical and not so technical parts.

CAPABILITIES
Since June 2017 Metagra Mexico have fully installed its manufacturing
line. The core mean of this line is a powerful 6 die cold forming transfer
machine providing a force of 500 Tns per stroke and handling rough
material (wire in coils) up to diameter 36,00 mm. Accompaning this
main machine there is also a pointing and thread rolling machine able
to provide different types of thread profiles to the manufactured parts.
External local providers for heat treatment and plating are also ready to
collaborate with us.

This year new production processes are incorporated, such as:

∙ Machined
∙ New threading process
∙ Cleaning of components by immersion

MAIN DESTINATIONS
METAGRA is currently delivering its parts to over 20 countries in 4 continents.

METAGRA MEXICO, S.A.P.I. de C.V. CERTIFICATIONS

Apaseo El Grande, Gto. ISO 9001, IATF 16949, ISO 14001, OSHAS 18001
Renault certified Quality laboratory for tribology
PSA Excellent Supplier Award (2006)
EU Environmental Award (Resource Efficiency) (2004)
Robert Bosch Braking Systems Quality Award (2002)
Best regional SME (Small & Medium Enterprise) (2002)
Preferred Supplier by Bosch   (31st March 2016)

75 GTO AUTOMOTIVE
>DIRECT SUPPLIER

MEXICANA is a company compromised on provide efficient,

immediate and with high quality solutions to our costumers.

OUR COSTUMERS
We provide services and products to Tier 1 companies
as automotive, aeronautic, metalworking and electronic
industries earning a great qualification on the National and
International level.

PRODUCT
• Thermoformed Plastic by Compression
• Masking Coating Solutions
• Rubber Packaging & Inserts Solutions
• Product Engineering
• 3D Print
• CNC Machining

MEXICANA DE PIEZAS PLASTICAS SA DE CV            

Leon, Guanajuato, Mexico

GTO AUTOMOTIVE 76
 >DIRECT SUPPLIER

MINAMIDA MEXICANA started operations in Mexico

since 2018, as a 100% subsidiary of MINAMIDA Co. Ltd., a
Japanese Tier 2 automotive parts manufacturer with more
than 80 years of experience in cold forging and machining.

Our strength is the forging technology for large/long size

and special shaped products. We also offer a variety of 2nd
process operation such as press, machining, tapping, and
swaging, to provide the products with high precision.

PRODUCT
Cold forged and machined parts for:
• Steering
• Chasis, Body
• Seat Belt
• Seat
• Torque Converter

CAPABILITIES
• Cold Forging
• Press
• Machining
• Rolling

MAIN DESTINATIONS
• United States of America • Brazil
• Mexico

MINAMIDA MEXICANA S.A. DE C.V. CERTIFICATIONS

Leon. Gto IATF 16949:2016
ISO 14001:2014 (IN PROCESS)

77 GTO AUTOMOTIVE
>DIRECT SUPPLIER

MITSUI KINZOKU ACT MEXICANA, specializes in

automobile door functional components was founded in May
2012, made its first shipment in October 2013; It is subsidiary
of Mitsui Kinzoku ACT, Corporation. Our mission is to deliver
valuable products to our customers Nissan, Honda and
Chrysler.

PRODUCT
Begin with the stamping and injection, machine are feed with
coils of Steel and plastics, were is mounted a die that drill
and inject shaping to obtain a final piece and then sent to the
assembly area.

CAPABILITIES
•  Manual and semi-automatic Assembly lines for automobile
door locks
•  Presses (2) 600T, (1) 400T, (1) 140T
•  Injection molding machines (3) 220T, (1) 310T, (5) 350T

MAIN DESTINATIONS
• United States • Japan
• Brazil • China

MITSUI KINZOKU ACT MEXICANA, S.A. DE C.V. CERTIFICATIONS

Silao, Guanajuato, Mexico. IATF 16949:2016
ISO 14001:2015

GTO AUTOMOTIVE 78
 >DIRECT SUPPLIER

Motus is an automotive interior supplier for major automotive

OEMs worldwide. Our unique mode of collaboration, which
includes consumer research and product design assistance
during the early stages of development, will help you deliver
products more easily, consistently and cost effectively.

We are the leading manufacturer of high-performance

headliners, door and console armrests, instrument panel
trim components, trunk compartment, inner dash, wheel
liners & underbody shield panels for interior and exterior
acoustical applications for the global automotive market.
We operate a state-of-the-art manufacturing platform with
twelve facilities in North America, Europe and Asia.
PRODUCT
• Trunk compartments • Headliners
• Inner dash • Door & console arm rests
• Floor carpet under pads • Instrument panel trim
• Underbody shields solutions • Other soft & decorative trim
• Exterior wheel liners components
• Storage bins

CAPABILITIES
• Compression molding • Assembly
• Pinch trim molding • Edge folding
• Water jet trimming • Edge wrapping
• Die cut • Vacuum & bladder forming
• Fiber lamination • Cut, Sew & Wrap

MAIN DESTINATIONS
• Mexico • Germany
• United States of America • Japan

MOTUS INTEGRATED TECHNOLOGIES CERTIFICATIONS

Celaya, Guanajuato. IATF 16949:2016
ISO 14001:2015

79 GTO AUTOMOTIVE
>DIRECT SUPPLIER

MPE MEXICO has been created in October 2008 and it has

started to be operative since January 2009.
The company deals with:

• Production of injection moulding items for the automotive

market.

• Production of blow moulding items for the automotive

market.

• Trade of finished products, marketing, customer care,

technical and sales support over Mexican market.

PRODUCT
• Technical injected items, such as adaptors, rings, caps,
levers.
• CVJ boots
• Shock absorber bellows
• Steering gear bellows

CAPABILITIES
Several injection moulding machines (with a clamping force
range from 50 tons till 350 tons) and Press-blow moulding
machines, which are used for blow moulding items.

MAIN DESTINATIONS
• United States of America • Brazil
• Asia • Mexico
• Europe

MATERIAS PLASTICAS Y ELASTÓMEROS DE MEXICO S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico. IATF 16949
ISO 14001

GTO AUTOMOTIVE 80
 >DIRECT SUPPLIER

MURTRALEON is a Spanish/Mexican company dedicated

to the manufacture of multifilament polypropylene yarn and
webbing.

Our company is one of the largest producers and suppliers

of multifilament polypropylene yarn in the Americas. Its
superb location in the city of Leon, Mexico, places it within
reach, either by land or sea, of the main cities of North and
Central America, as well as of major international ports.

It started operations since 2001. Our principal customers

are EXCO AUTOMOTIVE SOLUTIONS, LANGSTON
COMPANY DE MEXICO, CEMEX, and so on.
PRODUCT
• High strength multifilament polypropylene yarn.

• High strength webbing made of different fibers such as:

Polypropylene, Industrial Polyester and Nylon.

CAPABILITIES
•Yarn production capacity: 540 ton. /month.
•Webbing production capacity: 7,000,000 mts. / month.

MAIN DESTINATIONS
• United States •Venezuela •Uruguay
• Canada • Colombia • Spain
• Dominican Republic • Ecuador • Morocco
• Guatemala • Peru • Tunisia
• Salvador • Bolivia
• Honduras • Chile

MURTRALEON, S.A. DE C.V. CERTIFICATIONS

Leon, Gto. ISO 9001-2015
OEKO TEX

81 GTO AUTOMOTIVE
>DIRECT SUPPLIER

MYPI is a Mexican company dedicated for more than half a

century to design and build molds, manufacture of precision
plastic parts molded by injection process in PP, PE, PS and
engineering resins, such as PA6, PA66, PAGF, POM, ABS,
PC, PBT etc.

MYPI works for the automotive Sector since 2008 and

currently it provides plastic parts to Cooper Standard
Automotive, Johnan de Mexico, Kasai Mexicana, Yachiyo
Mexico, Teknia Automotive S.L.P. and Cyma Nacional.

PRODUCT
• Clips for fixation of automotive windows
• Drums for window regulator
• Base Plates and Carrier Plates
• Parts of clamping in interiors
• Interior Parts
• Caps or guards for metal parts during transport or
Assembly processes.

CAPABILITIES
Injection from 86 Tons to 300 Tons in Engineering Resins,
Workshop with CNC and EDM, Computer-Aided Design of Molds.

MAIN DESTINATIONS
• North America • Europe
• Brazil • England

MOLDES Y PRODUCTOS INYECTADOS DE PLÁSTICO, S.A. DE C.V. CERTIFICATIONS

Leon, Gto. ISO 9001-2015
IATF 16949:2016 (IN PROCESS)
DISTINCTION MARCA GTO
MEMBER OF CLAUGTO
D-U-N-S NUMBER: PENDING
PROCEDURE

GTO AUTOMOTIVE 82
 >DIRECT SUPPLIER

NOVATEC is an Spanish / Mexican automotive Company,

with production plants in N·quera (Spain), Tanger (Morocco),
León (México) and Chomutov (Cz Republic), expert in plastic
molding production of interior and exterior parts, with highly
dimensional and appearance requirements, as well as
innovative techniques, such as two-component injection, co-
injection and plastic painting.

PRODUCT
• 2-Sot plastic parts • Pcb Housings
• Fuel Flaps • Integrated Light Housings
• Fuel Filing Modules • Light Filters
• Engine Covers • Light Guides
• Exterior and Interior parts • Lens
for plating and painting • Inner lens

CAPABILITIES
• Mold engineering for the products we make
(molds and control gauges)
• Automation engineering
• Metrology (production and PPAP)
• Laboratory Test
• Full PPAP report
• R&D (research and development)
• 1K / 2K injection machines.

MAIN DESTINATIONS
• North America • North of Africa
• Europe

NOVATECLEON, S.A. DE C.V. CERTIFICATIONS

Leon, Gto. IATF 16949

83 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Ogawa Industria de Mexico is a company located in Silao,

Guanajuato. The core of its business is the manufacture of
technical cold formed parts. Our main goal is to offer products
with the highest quality standards.

Ogawa Industry Co.Ltd. was founded in 1939 in Japan

and started operations in Mexico on June of 2018. 100% of
investment is from Ogawa´s headquarters in Japan.

Ogawa uses forming technology and know-how to provide

highly precision and functional parts. Parts Forming is a high
cost-performance that approaches to mass-production and
uses a multi-stage horizontal forging machine, which can
process a wide variety of products with complicated profiles.
Also, it offers the screw threading and machining CNC
processes.
PRODUCT
• Body parts • Steering parts
• Suspension parts • Seatbelt parts
• Vibration insulating rubber • Transmission parts
parts

CAPABILITIES
• Cold Forging
• Screw Threading
• Machining CNC

MAIN DESTINATIONS
•  Mexico •  Brazil
•  United States of America

OGAWA INDUSTRIA DE MEXICO, S.A DE C.V. CERTIFICATIONS

Silao, Gto., Mexico IATF 16949

GTO AUTOMOTIVE 84
 >DIRECT SUPPLIER

Founded in San Diego, CA in 1986 as a Maquiladora

company, O&S California Inc. is a joint venture between Tokyo
Exchange Listed Company Onamba, Inc. and Sumitomo
Electric Ind. Ltd., with a factory location in Tijuana, B.C.

For the last 36 years, we have been producing wire

harnesses for the automotive, consumer electronics and
lighting industries. (Under IMMEX Program).

Our second factory was established in SENDAI Industrial

Park in Valle De Santiago, Guanajuato, June 2015. In
this location, we produce wire harnesses primarily for the
automotive industry.

PRODUCT
• Wire Harnesses – Mid/Small Size • Door Mirror
Harness Specialist • Gear Shift
Our products included wire • Steering Wheel
harnesses for: • Over molding for PVC system -Mid/
• Seat Belt Large size Harness.
• Airbag

CAPABILITIES
From design to final product wire harness manufacturing sitesassure product
quality with redundancy in-process test and our in-house design of fixtures,
jigs, electrical testers, crimp force monitors on all our auto-cutting wire
machinery.

MAIN DESTINATIONS
• United States of America • South America
• Mexico • Japan
• Europe • China

ARCOSA (ARNESES Y CONEXIONES S.A. DE C.V.) CERTIFICATIONS

BAJIO - OSCA´S FACTORY *ISO 9001:2015
• IATF 16949:2016
Valle de Santiago, GTO • ISO14001:2015
• OEA Operador Economico Autorizado
• EICC-Electronic Industry Citizenship
Coalition
• C-TPAT (Asociacion Aduanera-
Comercial contra el Terrorismo)

85 GTO AUTOMOTIVE
>DIRECT SUPPLIER

We are an automotive interiors manufacturer formed by a team of industry

professionals with long-standing careers and ample experience in the
interiors segment. A group of energetic individuals ready to provide quick
solutions to satisfy the most demanding customer needs. We strive to
create successful partnerships that will position our company as a preferred
supplier of the automotive interiors industry.

OUR COMMITMENT
To be the preferred automotive interiors supplier in Central Mexico and for
the rest of the automotive clusters in Mexico.
Extensive experience, ample resources and the best talent in Mexico ready
to support your needs.

OVV is located 4.1 kilometers (2.5 miles) south from the intersection of the
Leon-Queretaro and Salamanca-Morelia highways. Our location is also
flanked by two large sources of qualified labor.

PRODUCT
• Automotive Interiors. Armrests, HeadRests, IP wrapped inserts,
Consoles, and all textile cabin wrapped components.
• Dunnage. Fabric-Based Returnable Packaging for differnt Class
A components.

CAPABILITIES
• Pattern Development • CNC Knife cutting
• CAD software • CNC Laser cutting
• Qualified and experienced • Sewing Capabilities
engineers. Lean and competitive • Manual and programable sewing
processes. equipment
• Quick turnaround of samples and • Embroidery
prototypes. • All types of ornamental sewing
• Cutting Capabilities (French, Top Stitch, Inserts, etc.)
• Die Press (Die Cutting)

MAIN DESTINATIONS
•  Mexico •  Canada
•  USA

INDUSTRIAS DE CALIDAD OVV S.A. DE C.V. CERTIFICATIONS

Valle de Santiago, Gto., Mexico IATF-16949

GTO AUTOMOTIVE 86
 >DIRECT SUPPLIER

YOUR BEST PARTNER IN AUTOMOTIVE SOLUTIONS

ABSOLUTELY LINKED TO AUTOMOTIVE

We are specialists in the manufacturing of fasteners for

companies in the automotive sector. Quality, service and
innovation adapted to the requirements of a sector that is
demanding, competitive and in continuous transformation.

PRODUCT
From diameters of M4 to M10 and lengths between 10mm to
150mm:
• Cold forming parts • Stud Bolts
• Welding studs • Shafts
• Bushings and rivets. • Centering Bolts
• Screws for plastics • Metric Screws
• Double thread studs • And more...

CAPABILITIES
• Cold forming machines • Machining center
• Thread rolling machines • Optical sorting machines
(washer assembly)

PANELFISA-MEX S.A. DE C.V. CERTIFICATIONS

Celaya, Gto, Mexico IATF 16949:2016
ISO 14001

87 GTO AUTOMOTIVE
>DIRECT SUPPLIER

POLIMEROS Y DERIVADOS, company founded in Leon,

Mexico in 1960. Focused on generating technological assets
through combining its own innovation coupled with the
acquisition of international equipment to ensure the company
remains on the forefront of technology.

Is now considered among the largest nonwovens companies

in Mexico based on its dedication to product development.

More than 25 years manufacturing nonwoven fabrics with

multiple technical requirements for the Automotive industry.

PRODUCT
• Engine bay and hood: thermal and acoustic impedance barriers
• Insul-dash panels: thermal and acoustic insulation
• Headlinear
• Flat trunk carpet
• Velour carpet for cabin
• Wheelhouse and underbody shield
• Seats: reinforcements , heating/cooling , injection.

CAPABILITIES
Nonwoven manufacturing systems such as: dry-laid, wet-laid, spunlaced,
resinated, needlepunch, thermobond, stitch-bond, adhesives application;
converting.

MAIN DESTINATIONS
• USMCA Offices in:
• Center and South America • USA
• Asia • Guatemala
• Oceania • Colombia.

POLIMEROS Y DERIVADOS, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato. ISO 9001- 2015

GTO AUTOMOTIVE 88
 >DIRECT SUPPLIER

PYA AUTOMOTIVE, Headquartered in Mexico City

and Irapuato, Is a leading supplier specializing in the
manufacture of Plastic, Rubber and Metal components for
the automotive and safety industries.

Mexican Tier 1 Manufacturer

MAIN COSTUMER
• Daimler • Securit Saint Gobain
• BMW • Freudenberg
• Honda • Hope Global
• Hella • Penda
• Nissan • Mazda
• Bos • Fehrer
• Macauto • Kasai Mexicana
• Tesla • TRW
PRODUCT
ALGONTEC-PYA
• Exterior Body • Heating & air conditioning
• Interior & class A ducts
• Suspetion & antivibration • Metal stamping

CAPABILITIES
• 2K Injection
• 50 – 3K Tons
• Full Metrology Lab.

MAIN DESTINATIONS
• America • Asia
• Europe

PYA AUTOMOTIVE S. DE R.L. DE C.V. CERTIFICATIONS

Irapuato, Gto. IATF-16949
ISO 9002 / QS9000
CERO DEFECTS 1992 TO 1994, 1998,
2000, 2002, 2007, 2008, 2010 , 2011
EXCELENCE 1996
MASTER OF QUALITY 1997 TO 2002

89 GTO AUTOMOTIVE
>DIRECT SUPPLIER

RELATS is a multinational Catalan family company highly

internationalized, which was founded in 1957 in Caldes de
Montbui (Barcelona) by Vicenç Relats Arimon.

RELATS has a presence in five continents across six

manufacturing plants (Catalonia, China, Mexico, Morocco,
Vietnam and Romania) and technical and commercial
offices around the world (USA, Japan, Mexico, UK,
Germany and France).

RELATS works with companies that supply the main

components of global brands in the automotive industry,
aerospace, railway, electricity sector, appliances and
renewable energy.
PRODUCT
Relats designs and produces a range of products with
textile substrate systems for engines, brakes, push pull
cables, rubber hoses and metal pipes, among many other
applications.
CAPABILITIES
Relats manufactures flexible sleeves for thermal insulation,
electrical, mechanical, sound reduction and new product
range for EV, HEV & PHEV such as impact protection and
electromagnetic shielding components. Wide range of
automotive OEM homologations.
MAIN DESTINATIONS
• NAFTA • Argentina
• EMEA • China
• Brazil • Vietnam
• Japan

RELATS MEXICO S.A. DE CV CERTIFICATIONS

Silao, Guanajuato, Mexico IATF 16949
ISO 9001
EN9100
ISO 14001

GTO AUTOMOTIVE 90
 >DIRECT SUPPLIER

R-F HOODS is a proudly Mexican Company established on

July 21st, 1992, with a clear idea of the quality meaning for the
heavy duty collision parts market. We have more than 27 years of
experience manufacturing hoods, bumpers and collision parts for
medium and heavy-duty trucks, on fiberglass and aluminum.

In addition we are selling too a full line of body parts and accessories
of a high quality that we always test before to be sold to any of our
distributors.

Some of our main customers include insurance companies, Dealers,

Body Shops, Chrome Shops and fleet companies in Mexico, United
States, Canada and some countries in Central America.

PRODUCT
Hoods, Bumpers, Grilles, Fenders, Top Roofs, Day Cab Conversions,
Fairings, Panels, Cab sun visor, Chrome accessories, Exhaust, Air
Cleaners, Battery Covers, Cab Guards, Bezels, Headlights, Turn Lights,
Mirrors, Door Handles, Hood accessories, Wheels, Nut covers & Hub Caps
and Lighting.

CAPABILITIES
We get facilities of 100,000 ft2 that consist in our Production plant, Molding
and Development, Exporting, Sales and office areas, and get 9 branches
for retail on Mexico a warehouse in Laredo.
We all together are around 220 employees.

MAIN DESTINATIONS
• United States • Panama
• Canada • Guatemala
• Colombia • Chile
• Honduras • Peru

R-F HOODS & TRUCK PARTS S.A. DE C.V. CERTIFICATIONS

Silao, Guanajuato. Heavy Duty Quality
Council (HDQC)

91 GTO AUTOMOTIVE
>DIRECT SUPPLIER

ROCAND, Canadian company founded in Quebec in 1996, is a

leader in the plastic industry. From design and manufacturing of
blow and high-tech injection molds, to injection molding from 85 to
900 Tons and blow molding of 5 to 8 Lbs. In-house molding testing
and serial production of plastic parts.

ROCAND molds and plastic parts are used in many sectors as

automotive, medical equipment, electric and electronic systems.
With new plant in Mexico and technical center support in N&S
Americas and Europe Rocand is able to manage your worldwide
projects.

PRODUCT
• Blow Molds • Injection Molds
• Twin-Sheet Blow Mold • Multi Cavities Injection
• In-Mold Cutting • Bi-injection
• In-Mold Punching
• Unscrewing Device Blow Molding with 2D & 3D
• Insert Over Molding capacity: 5 to 8 lbs.
• Vacuum Blow Molds Injection Molding: 80 to 900 tons

CAPABILITIES
CAD (Catia V5), CAM (Work NC), 5 and 3 axes CNC, Sinker &
Wirecut EDM, 3D laser Scanning & reverse engineering, Laser
Welding, Air duct blowing parts of 5 and 8 lbs., Injection from 80 to
900 Tons.

MAIN DESTINATIONS
• North America • Asia
• Europe

ROCAND MOLDE Y PLASTICO S DE RL DE CV CERTIFICATIONS

Silao, Guanajuato, Mexico ISO 9001:2015 FOR MOLD
MAKING ACTIVITIES
ECO RESPONSABLE
IATF 16949 FOR
AUTOMOTIVE PARTS

GTO AUTOMOTIVE 92
 >DIRECT SUPPLIER

SAMOT is a metalworking industry situated in Silao – Guanajuato.

It was founded in Brazil by Tomislav Jancar in 1960 and began its

offer of services to meet the demands of the automotive industry
in Brazil. Samot arrived in México in 2009, and the company has
accompanied the sector’s growth and development. Currently
Samot provides a complete solution of machining according to
the customer´s project with worldwide class results. Our main
customers are Eaton, Bosch, BorgWarner, MMM, Continental
Nexteer Automotive, Honda Lock, Denso and Thyssenkrupp.

PRODUCT
Serial production of parts in Aluminum, Steel and Stainless Steel.
Turning, machining, grinding, and hard anodizing.

SAMOT parts are used in brakes, engines, shock absorbers,

steering, electronic injection, gasoline systems and among others.

CAPABILITIES
Multi-spindle lathes CNC and mechanical, grinders, machining
centers and anodizing line. Our components are produced with high
levels of precision and technology; high performance equipment and
autonomy derived from our own production of tools and devices.

MAIN DESTINATIONS
•  United States of America •  South America
•  Mexico

SAMOT INDUSTRIA MECANICA S. DE R.L. DE C.V. CERTIFICATIONS

Silao, Guanajuato. IATF 16949
ISO:14001
CQI-12

93 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Sannohashi Manufacturing Mexico is a manufacturing company

of sophisticated engine bolts and pins, these automotive bolts and
pins are required a high reliability and a high safety in their quality,
because of their decisive influence on safety of life, precise cold
forging products for Steering Units, Suspension Units, for the
Body and other Units of vehicles.
Sannohashi Mfg México, was founded in México in 2012,
January 2013 started general and Sales Operations at a
temporary office.
April 2013 the Manufacturer Plant and the Office was completed
and opened.
May 2014 we started the Mass Production for TRMX
Aug 2014 assessment the Audit approved by Nissan
Sep 2014 Tier 1 business began for YAGM
Dec 2015 Mass Production for Nissan began
Feb 2017 ISO 9001:2015 was obtained
2018 100TH ANNIVERSARY of SANNOHASHI ESTABLISHMENT
2019 Plant expansion
2021 Mass Production business with ITALIKA, started.
2022 IATF certification
Our main Customers are:
• NISSAN TRADING •YOROZU
CORPORATION AMERICAS •MITSUI KINZOKU
•THK •MAGNA AUTOTEK
•JATCO •HITACHI ASTEMO SILAO
•UNIPRES •HONDA LOCK
•SAN-S •ITALIKA

CAPABILITIES
•Cold Forging •Heat Treatment Continuous Furnace
•Vertical Press •Shot Blast
•Thread Rolling •Inspection equipment

SANNOHASHI MANUFACTURING MEXICO SA DE CV

Silao de la Victoria, Guanajuato, México

GTO AUTOMOTIVE 94
 >DIRECT SUPPLIER

SCHERDEL has a market tradition of 130 years with 45 production sites

worldwide. We are market leaders on High Technology for the Processing
of metallic wire and strip, Plastic Injection, Thermal Management, and
Surface Treatment processes. We support customers with our deep
expertise for technical springs, stampings, bending, wire forming, and
joining technologies.

SCHERDEL offers an R&D Engineering approach, and provides local

Technical, Project Management, Quality and Customer Service support.

We design and supply for almost all vehicle applications as engine,

brake, opening, steering, transmission, e-mobility (energy storage, power
electronics, and thermal management systems) among others.

PRODUCT
• Technical Springs (compression, tension, torsion, ect.)
• Stamping and Bending
• Wire Forming
• Surface Treatment (coating, flocking, technical cleanliness – cutting edge
technology for tight requirements)
• Plastic Injection and Insert Molding
• Thermal Management (precision tubes and cooling pipes forming and
bending)
• Assembly Technologies and sub-processes (eg. laser and ultrasonic
welding, and gluing)

CAPABILITIES
•Spring Cold Forming. Wire diameters from 0.40mm-8.6mm. Static and
Dynamic stress applications. Tight tolerance requirements are possible.
•Stamping and Bending from 0.20mm-1.40mm thickness, and stamping
force up to 75 tons.
•Coating - Zink Aluminum flake based microlayer corrosion protection
system.
•Flock PES 0.7mm for visual, noise reduction, and anti-corrosion protection.
•High-quality injection and insert molding 40-400 tons, CNC 3 & 5 axis, wire
cutting EDM, laser welding machines.
•Simulation Capabilities (e.g., electrical, fluid dynamics, material simulations).

SCHERDEL DE MEXICO S. DE R.L. DE C.V. CERTIFICATIONS

Silao, Guanajuato IATF 16949:2016
ISO 14001: 2015
C-TPAT

95 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Since 2019 Schimmel is an automotive interior supplier for major

automotive OEMs worldwide. Our unique mode of collaboration,
which includes consumer research and product design assistance
during the early stages of development, will help you deliver
products more easily, consistently and cost effectively.

We are the leading manufacturer of high-performance headliners,

door and console armrests, instrument panel trim components,
trunk compartment, inner dash, wheel liners & underbody
shield panels for interior and exterior acoustical applications
for the global automotive market. We operate a state-of-the-art
manufacturing platform with twelve facilities in North America,
Europe and Asia.
PRODUCT
• Trunk compartments • Headliners
• Inner dash • Door & console arm rests
• Floor carpet under pads • Instrument panel trim
• Underbody shields solutions • Other soft & decorative trim
• Exterior wheel liners components
• Storage bins

CAPABILITIES
• Compression molding • Assembly
• Pinch trim molding • Edge folding
• Water jet trimming • Edge wrapping
• Die cut • Vacuum & bladder forming
• Fiber lamination • Cut, Sew & Wrap

MAIN DESTINATIONS
• Mexico • Germany
• United States of America • Japan

SCHIMMEL S.A. DE C.V. CERTIFICATIONS

Leon, Gto. IATF 16949:2016
ISO 14001: 2015

GTO AUTOMOTIVE 96
 >DIRECT SUPPLIER

With presence in over 10 countries and more than 60 years

of experience, SEKISUI PLASTICS offers molding solutions
for the automotive, home appliances and construction
industries.

We are able to design, and produce custom components

and packaging products to exceed our customers’
requirements. Our leading technology and experience in
the use of Piocelan and EPS, added to our new strategic
location in Guanajuato, provide us with a competitive
advantage against other molders. Our material can be
found in several automotive applications.
PRODUCT
• Piocelan and EPS products • Packaging
• Tool box • Door Pad
• Front and rear bumpers • Lid board core
• Floor spacers • Seat cores
CAPABILITIES
We are capable of designing and manufacture custom made
products.

At our first stage we have 4 molding machines with a 60 tons

per month production capacity.
MAIN DESTINATIONS
• Brazil • USA
• China •Thailand
• Japan

SEKISUI KASEI MEXICO S.A. DE C.V. CERTIFICATIONS

Valle de Santiago, Guanajuato IATF 16949

97 GTO AUTOMOTIVE
>DIRECT SUPPLIER

Development and Manufacturing Components and Sub

assemblies, autoparts, special machines and painting
process.
We offer integral services that add value to the industry and
present options that adapt to the needs of each one of our
clients.
Our goal is to be the facilitators of the growth of your
competitive advantages.
Tier1 and Tier2 suppliers for the automotive industry.

PRODUCT
Integral processes for design, manufacture and top coats/
finishings of components for the Metal-Mechanic Industry.

CAPABILITIES
• Laser Cut • Centerless grinder
• Waterjet cut • New Painting Facilities
• CNC Bending • Batch and automatic
• Laser engraving powdercoating
• Electropoint welding • Batch and automatic E-coating
• Tubular bending, profiles and • Niquel Electroless
endformings • Robotic Welding
• CNC Turning •CNC Plasma cutting
• CNC 3 & 5 axles machining •Press
• Lathes with Y axis and life tools •Zinc plating

MAIN DESTINATIONS
• Europe • United States of America

SERVICIO DE INGENIERIA INDUSTRIAL Y OUTSOURCING, S.A. DE C.V. CERTIFICATIONS

Celaya, Guanajuato ISO 9001:2015
IATF 16949:2016

GTO AUTOMOTIVE 98
 >DIRECT SUPPLIER

SK TEC MEXICANA is a company dedicated to stamping, welding (Arc & Spot) and
assembly of metal parts for automotive industry. Additional to these processes, we can
offer integral parts. It means that SK Tec can arrange the assembly of plastic components,
insert mold, plating, heat treatment, painting (e-coating, nylon coating, etc.)

We are part of Sankyo Group. A Group with headquarters and 3 manufacture companies
in Japan. Overseas we have 2 branch offices locates in the United States (Ohio state) and
in Mexico (Irapuato, Guanajuato).

SK TEC MEXICANA is located in the named Bajio diamond, near to Toyota, Mazda,
Honda & Nissan plants.

PRODUCT
•  Door. Mainly brackets •  Sunroof: Rail system (stamping parts,
•  Seat (frame and body). Brackets, plastic, insert mold, assembly)
movement parts, lock parts, rail, Lever, •  Chassis: Brackets mainly.
Links.

CAPABILITIES
PRESS EQUIPMENT MAKER UNITS
110ts (1100kn) AIDA 4
110tw (1100kn) AIDA 1
160tw (1600kn) AIDA 1
200t (2000kn) AIDA 2
300t (3000kn) AIDA 2
ULX-3000 (300t) AIDA 1
STATIONARY SPOT WELDING MACHINE MAKER UNITS
DENGENSHA 4
CHOWEL 2
AUTOMATIC ARC WELDING MACHINE MAKER UNITS
FD-V8 DAIHEN 3
FD-V6 DAIHEN 3
AX-H3 DAIHEN 2
RIVETING MACHINE MAKER UNITS
US-66 YOSHIKAWA 2
US-36 YOSHIKAWA 14
US-70 YOSHIKAWA 20
TAPING MACHINE UNITS
3
SEMI SELF EMPLOYE D ASSEMBLY MACHINE UNITS
3

SK TEC MEXICANA, S.A DE C.V CERTIFICATIONS

Irapuato, Guanajuato. Mexico. ISO 9001-2015

99 GTO AUTOMOTIVE
>DIRECT SUPPLIER

We are located in Guanajuato Mexico, the place with highest

growth in the automotive industry; we offer solutions for
adhesives and coatings for industry.

ABS / PA / PC / PET / PP / PS / PVC

lmprove production efficiency with our adhesive lines for

the assembly of auto parts, thread sealing, antivibration
systems, upholstery, awnings, panels and more.

We also develop coatings in matte finish, high gloss,

metallic and matting paint. Our products are ideal to provide
uniformity of color for injection processes. Also Pigments
and reléase agents for polyurethane systems.

Design, development and implementation on-site equipment

for the application of adhesives and coatings.

Through our qualified work team, we provide maintenance

and conditioning services for productive areas.

SOLDER DE MEXICO, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico

GTO AUTOMOTIVE 100

 >DIRECT SUPPLIER

Founded in 2002, Coglitec began as an opportunity to transfer

the unique vulcanizing process developed by the shareholders on
the prior years. The developed vulcanizing process guarantees
at least the 99% of the surface covalent union between the metal
and rubber surpassing the rubber’s yield strength (elastic limit).

The company features the knowledge to upgrade the physical

and mechanical rubber performance thus optimizing the product
efficiency in operational conditions.

PRODUCT
• Sulastic Shackles for a better and more comfortable ride on
the vehicle.

• Rubber-Metal Parts where is critical to have an

outstanding rubber bonding process.

• Torsion Rubber replacement parts also known as Torsilastic.

CAPABILITIES
Our manufacturing process using only rubber and metal of top
quality. The rubber and metal are bonded together using our
exclusive technology and thus achieving a longer lasting product.
In addition, our process allows us to guarantee the metal to rubber
bond will outlast the rubber itself, adding value to the product.

MAIN DESTINATIONS
• United States of America • Spain
• Canada • Brazil
• Australia • China
• Germany • Philippines
• UK

COGLITEC, S.A. DE C.V.

Irapuato, Guanajuato.

101 GTO AUTOMOTIVE

>DIRECT SUPPLIER

TEKFOR is a global specialist in forming technology, Tekfor

develops solutions and products for the market of tomorrow.
With technologies such as a steel forming, machining,
assembly process as well as heat and surface treatment,
we are one of the leading manufactures of high performance
components.

Tekfor started its operations in Mexico back in 2010.

It manufactures high quality precision machined components.
Our main customers are Magna Powertrain, Schaeffler &
Valeo.

PRODUCT
Our products: Forge parts and machined parts for transmission, engine and
driveline as an input gears, flange, wheel hubs, pump hubs, pilot hub, inner
ring, pinions, mainshafts.

Our process: Turning, Drilling, Broaching, Milling, Grinding, Assembly,

Induction Heat treatment, Hobbing, Rolling, Hard turning and Whasing.

CAPABILITIES
Start from 100T pcs/year.

MAIN DESTINATIONS
• United States of America

TEKFOR MEXICO S.A. DE C.V. CERTIFICATIONS

Irapuato, Gto., Mexico IATF 16949
ISO 14001

GTO AUTOMOTIVE 102

 >DIRECT SUPPLIER

TEKNOLINEA begins operations in Mexico on June 21, 1999

in charge of the engineer Carlo Benedetti with the support of
decades of experience working in Moro Minuterie in Padua, Italy;
offers an extensive variety of accessories for different industries.

TEKNOLINEA manufactures galvanic systems with water and air

treatment, technical and fashion trimming accessories focused in
providing with inputs the national and international industry, also
provides the service of finish galvanic maquila.

Our main clients are: YKK SANPS FASTENERS, EL TORNILLO,

CONTEYOR, EJOTAFT, etc.

PRODUCT
• Complete galvanic system with water and air treatment.
• Accessories manufactured on a Sequential Stamping Process
that forms the piece on a steel, brass or aluminum sheet.
• Galvanic Finishing Process: Nickel, Black Nickel, Bright Brass,
Zink (Black, Blue, Yellow), Old Nickel, Old Brass, Old Copper,
Gold, Bronze, White Bronze or Nickel Free and Coating.

CAPABILITIES
•  16 Machine Stamping 60 TON
•  500 TON Galvanic Finishing P/Month

MAIN DESTINATIONS
•  Mexico •  Canada
•  Guatemala •  Italy
•  El Salvador •  Holland
•  U.S.A •  Dominican Republic

TEKNOLINEA, S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mexico ISO 9001:2015
MARCA GTO
MEXICAN SOURCIN QUALITY
CIATEC PRODUCTO CONFORME

103 GTO AUTOMOTIVE

>DIRECT SUPPLIER

We are a Mexican plastic injection molding company located

in Leon, Guanajuato, Mexico. We started operations in 2003.
We work for Medical and Automotive industries.

Medical: we are an OEM producing and distributing our own

brand and design of vaginal disposable speculum (a medical
disposable device which is introduced into the body).

Automotive: we are a Tier 2 automotive supplier producing

interior plastic parts for Nissan, Honda, Mazda, Infiniti, Audi
and FCA.

In 2019 we made a partnership with three other companies

and created together ATG additive manufacturing, a company
that produces metal 3D printing parts with PBF-L process.

PRODUCT
• Plastic injection molding parts.
• Assembly lines.
• Medical device (vaginal disposable speculum).
• Metal 3D printing parts.

CAPABILITIES
• Injection molding machines, range from 55 ton to 480 ton (However
we will continue acquiring more machines to meet market needs).
• Assembly lines.
• Overmolding.
• Clean Room.
• 3D metal printing (with strategic partnership).

MAIN DESTINATIONS
• USA • Japan
• Europe

TEMAPLAX, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico ISO 9001:2015
IATF 16949 (in process)

GTO AUTOMOTIVE 104

 >DIRECT SUPPLIER

Texprotec Group offers complementary solutions for technical

cable protection and conduit braids. A visionary group,
which innovates and develops high-tech products adapted to
technological developments.

Texprotec de Mexico was founded in December of 2018,

starting operations in the year of 2020, it’s a joint venture
between a French group (Texprotec) and a Mexican group
(Grupo Leon), and Texprotec de Mexico aims to bring all the
experience and know-how of Texprotec group to the American
continent, and fulfil the all the requirements of its market.

Our main costumers should be harnesses and hoses

manufacturers, among others.
PRODUCT
•  Monofilament and multifilament sleeves for mechanical protection, noise
reduction, among others.
•  Self-wrapping weaved sleeve flame retardant polyester multi and
monofilament.
•  Woven shrinkable sleeves of polyester multifilament and polyolefin
monofilaments.

CAPABILITIES
• Our capabilities consist in braiders of different sizes from 24 carriers to 120
carriers, winding machines, cutting machines, and proper packaging for
any special requirement.
• As well as a twisting machine property of Grupo Texprotec.

MAIN DESTINATIONS
•  United States of America •  Spain
•  France •  Brazil

TEXPROTEC DE MEXICO S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mex. IATF 16949

105 GTO AUTOMOTIVE

>DIRECT SUPPLIER

Textiles Leon is a Mexican company, with more than 60 years in

the National and International market. Located in Leon, Mexico, it
is dedicated to the manufacture and production of narrow fabrics
and textiles (Webbings and added processes. Textiles Leon offers
textiles solutions for high competitive sectors such as: automotive,
aerospace, medical, safety, pipelines restoration and industrial
applications in textile products offering the highest quality standards
and cutting edge technologies. Our principal clients are: Faurecia,
Lear Co., Tachi-S and Hope Global.

PRODUCT

We can develop and produce several textiles based on our clients’

necessities, such as:
• Webbings • Printed Labels
• Elastic • Hook and loop
• Woven Labels

CAPABILITIES
• Production capacity of more than 50 million meters per year in different
textiles products.
• Fire retardnt finishes
• Full PPAP report

MAIN DESTINATIONS
•  Australia •  Costa Rica
•  Colombia •  Puerto Rico
•  United States of America •  Morocco
•  Guatemala •  Vietnam
•  El Salvador •  China
•  India •  Indonesia
•  Canada •  Thailand
•  United Kingdom

TEXTILES LEON, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico ISO QUALITY
MANAGEMENT 9001:2015
EMPRESA LIMPIA
(GRANTED BY THE STATE
OF GUANAJUATO)

GTO AUTOMOTIVE 106

 >DIRECT SUPPLIER

Company Name: Toyotetsu de Mexico S.A de C.V

Establishment: October 2016
Location: Apaseo el Grande, Gto.
Start of Operations: December 2019
Production: Structural and functional parts of Tacoma
Main customers: Toyota Motor Manufacturing (TMMGT,
TMMBC and TMMTX), Toyota Motor SAles Inc, Toyotetsu
Texas Inc.
Main Technologies: Stamping: Blanking, Aluminum /
Progressive, Transfer, Hot Stamping line, UHTST Stamping
Welding: Spot/Arc
PRODUCT
•  Center pillar •  Clutch peal
•  Front pillar •  Member side
•  Lower back •  Rear Floor
•  Radiator support •  Lower control arm
•  Rocker panel •  Dash Panel
•  Upper control arm •  Back Panel
•  Break pedal •  Cowl Assy
CAPABILITIES
Toyotetsu is a comprehensive automotive parts supplier of:
• Stamping: Our capabilities are 1600TR, 3000TR, 3500TR,
1000BL, 1200BL and hot stamping machines.
• Welding and Assembly: Weld process is Spot an ARC
welding.

MAIN DESTINATIONS
•  United States of America •  Mexico

TOYOTETSU DE MEXICO S.A. DE C.V. CERTIFICATIONS

Apaseo el Grande, Guanajuato, Mexico. ISO 14001
C-TPAT

107 GTO AUTOMOTIVE

>DIRECT SUPPLIER

TQ-1 is a Mexican-Japanese Company, Formed by the association

of Toyo Quality One Corporation, Ureblock S.A. de C.V. y Nagase
& CO., LTD.

Established in november 2010, our commitment is to provide

services and products of the highest quality in conjunction with
our partners, administrative and operative staff, we work under the
highest international standard ISO 9001 – 2015.

TQ1 de Mexico S.A. De C.V. Urethane mold seat production and

flame laminating products for the automotive industry.

Our products are being adopted for assembling companies in

Mexico and the United States, such as Nissan, Honda, Mazda,
Toyota y Mitsubishi.

PRODUCT
Flame laminating and urethane molding for applications in:
• Seats.
• Doors.
• Headrest.

CAPABILITIES
MOLDING:
We have cutting-edge urethane molding production equipment that
meets international standards, with which it is possible to match any
requests from our customers.
• Large Mold (Max. 7.5 KG)
• Small Mold (Min. 20 GM)

LAMINATING
We provide flame laminating products

TQ1 DE MEXICO S.A. DE C.V.

Purisima del Rincon, Guanajuato

GTO AUTOMOTIVE 108

 >DIRECT SUPPLIER

VCST is a world-class automotive supplier of powertrain and brake

components for almost 50 years. Every day, our passionate people
across three continents exceed expectations to support our customers.

We provide innovative gear concepts for a variety of light, medium and

heavy duty applications, including new xEV gearboxes, conventional ICE
engine and transmission gears.

Our automated high-volumes production plants have all key processes in-
house, including heat and surface treatment. VCST patented or bespoke
solutions are at the heart of our customers’ trustworthy products. With
VCST engineered products inside, you can rely on your equipment to get
the job done.

With plants in Belgium, Germany, Romania, China & Mexico, VCST

is close to customers all over the globe, giving them leverage and
a sustainable global supply base, benefiting from our best-in-class
customer support with no compromises on flexibility, quality and delivery:

VCST, your drive, our passion

Customers: Ford, BorgWarner, Cummins, Paccar, Caterpillar, AAM,

Pierburg, Stackpole, Wabco, ThyssenKrupp, Land Rover
Employees: +450
PRODUCT
•  EV reduction gears, HCV engine gears, PV engine and transmission
gears, Intermediate Gear Assemblies, Oil Pump Gear Assemblies.

CAPABILITIES
• Gear Honing, Gear Grinding, Gear Hobbing, Zero-Defect Final Inspection,
Carburizing, Induction Hardening, Face Griding, ID Honing, Hard Turning,
CNC Machining, Broaching, Metrology Lab, Gear Measurements Lab.

MAIN DESTINATIONS
•  United States of •  China •  Belgium
America •  India •  United Kingdom
•  Mexico •  Brazil •  Ireland

VCST DE MEXICO S. DE R.L. DE C.V. CERTIFICATIONS

Leon, Guanajuato IIATF 16949:2016
ISO 14001:2015
AWARDS FROM CUSTOMERS:
2021 Supplier of the Year - Cummins
2020 Q1 3.0 Gold-Ford
2020 SQEP Platinum - Caterpillar

109 GTO AUTOMOTIVE

>DIRECT SUPPLIER

Servicios Vistamex is a Tier 2 Mexican Company , which on

the last years have been developed as trustworthy supplier
into Plastic Injection and Assembly Industry, offering
SOLUTIONS with Competitive Prices and ensuring the
Deliveries on time our Customers.
PRODUCT
Plastic parts (steering wheels’ car, vents and components
for air conditioning, front and rear lights, antennas, radiators,
transmissions).

Technological capabilities: Performing analysis Metrology parts and

components to meet the requirements of a PPAP.

CAPABILITIES
INJECTION
•  Automatized process, over molding and pigmented
•  25 Tons up to 1100 Tons
•  2K injection, Engel machine 350 T
•  220 Tons Vertical Injection

ASSEMBLY
•  Automotive and appliance sub assembly products
•  Household assembly finish good products

ADDITIONAL PROCESS
•  Heat transfer and pad printing
•  Ultrasound welding

MAIN DESTINATIONS
•  Belgium •  United States of America
•  China

SERVICIOS VISTAMEX, S.A. DE C.V. CERTIFICATIONS

Apaseo el Grande, Gto. IATF
ISO 9001
UL MOLDER
SOCIAL RESPONSIBLE
COMPANY

GTO AUTOMOTIVE 110

 >DIRECT SUPPLIER

Vulcan Silicone, Mexican manufacturer located in Irapuato

Guanajuato is a supplier specialized in silicone and plastic
components mainly for industry and home appliances.

Main customers:
- PYA Automotive
- Wasion
- Weidner
- Federation plastics
- Childo

PRODUCT
- Silicone Grommets
- Silicone Boots
- Silicone accessories
- Silicone O-rings
- Silicone plates
- Silicone Menstrual cups
- Plastic covers for electric industry.
- Plastic Pallets

CAPABILITIES
- 250 – 1800 Tons for plastic injection
- 250 Tons Vacuum Compression Molding Machine

MAIN DESTINATIONS
•America

VULCAN SILICONE S.A. DE C.V. CERTIFICATIONS

Irapuato Gto. IATF 16949

111 GTO AUTOMOTIVE

>DIRECT SUPPLIER

WeWire works worldwide as part of the Coroplast Group on creating

innovative solutions for the automotive industry. We are a market
leader for wheel arch harnesses and in tune with the megatrends of
e-mobility, autonomous driving and connectivity. With around 7,000
employees working at 15 sites worldwide, we are always close to
our customers such as Volkswagen, BMW, Daimler, Porsche, Ford
and many more. We have been producing in Mexico since 1998 –
and are located in Acámbaro since 2011 and in Celaya since 2019.
PRODUCT
Wheel arch harnesses: Wiring harnesses:
• Innovative combination of several • Electric steering
functions • Engine harness
• Multicore cable and/or tube system • High-Performance-harnesses
• Overmolded grommets &
connectors Special products:
• Brake pad wear sensor cable
Injection molding components: • Door latch cover
• Multi-pin connector housings • Brackets
• Overmolding of connectors to tube • 3D printed prototypes
and cable
CAPABILITIES
• Cutting of special wires segregation of NOK parts
• Marking of wires
• Stripping of jacket wires Automatic assembly of PUR tubes:
• Grommet assembly • Processing four harnesses at the
• Striping of single wires same time.
• Seal (ELA) assembly • Adjustable parameters to different
• Crimping tube lengths/NRs.
• Connector assembly • Up to 4/6 single core wires.
• Secondary lock assembly
• Automatic detection and Design and development center

MAIN DESTINATIONS
•  Germay •  Argentina •  Puerto Rico
•  USA •  Brazil

WEWIRE ACAMBARO MEXICO S DE RL DE CV CERTIFICATIONS

Acambaro, Guanajuato ISO 14001:2015
IATF 16949:2016
ISO 9001:2015

GTO AUTOMOTIVE 112

 >DIRECT SUPPLIER

For over 125 years, WITZENMANN has been a world-leading

manufacturer of flexible metal elements.

We design engineered solutions to decouple vibrations

and compensate for thermal movement. As a development
partner for Automotive OEMs and Tier Ones, Witzenmann
offers a large portfolio of tooling, prototype production and
testing equipment for products and processes for both
existing & new applications.

With Headquarters in Germany, 24 factories in the world and

3,700 employees world-wide, Mexico is our newest factory,
starting operations in 2015.

PRODUCT
Metal Hoses, Metal Bellows, Pipe Supports, Exahust Gas Return
pipes, Expansion Joints, Decoupling Elements.

We design and manufacture our core processes, machines

and tools.
CAPABILITIES
Thin-walled stainless Steel tube welding, special hydroforming
pressing, testing, final assembly.

MAIN DESTINATIONS
•  Germany •  Czech Rep. •  US
•  Spain •  Russia •  Canada
•  Italy •  India •  Mexico
•  UK •  Korea •  Brazil
•  Slovakia •  Japan

WITZENMANN METAL PRODUCTS MEXICO S.A. DE C.V. CERTIFICATIONS

Apaseo el Grande, Guanajuato · WITZENMANN MEXICO: IATF 16949
· WITZENMANN GROUP: AEO, EJMA,
ASME, DVGW, VDS

113 GTO AUTOMOTIVE

>DIRECT SUPPLIER

v Elektronik iBE is a manufacturer of customized inductors that are

used in a variety of automotive applications. We are part of the Würth
Elektronik eiSos Group, the largest production entity of the Würth
Group.

More than 35 years ago, we started to build our business in Thyrnau,

Gemany. With six manufacturing facilities and 3 sales offices we are
represented in all significant markets and continents. In 2006, Mexico
plant was strategic stablished in Irapuato, Guanajuato to attend the
NAFTA market.

Our mission is to drive solutions. Our products are not only used in
many safety-related applications. We also supply individual customized
solutions for areas such as comfort, ADAS and Powertrain.

PRODUCT
Our product range contains customized air coils made of round or
flat wire, rod core chokes, power inductors and ferrite cores. The
customized designs are 100% tailored to the requirements of our
customers and the respective application.

CAPABILITIES
Know how in automation, design department for customer
validations, testing laboratories.

MAIN DESTINATIONS
• United States of America • Germany
• Japan • Brazil

WÜRTH ELEKTRONIK MEXICO S.A. DE C.V. CERTIFICATIONS

Irapuato, Gto. ISO 14001:2015
IATF 16949

GTO AUTOMOTIVE 114

INDIRECT
SUPPLIERS
>INDIRECT SUPPLIER

We are a 100% mexican company, we have the backing of more than

40 years of experience, serving the industry in general with the different
electrolytic coating processes, located in the city of Celaya, Guanajuato,
Mexico. Company founded in 1981, 100% mexican investment.
Our main clients are:

PEMSA, CMR, Interilum, SIIOSA, Ferrebaztan, Aceros de Celaya,

THORO, BOIX Mexico, Maquinados Madel, ESYPRO Mexico.

PRODUCT
ELECTROLYTIC ZINC PLATING:
- Hexavalent Blue
- Tropicalized Hexavalent
- Hexavalent Black
- Trivalent Blue
- Tropicalized Trivalent
Capacity Tub 6.10m long by 80cm wide and 1.20cm deep.

ZINC-NICKEL:
Tub 2.40m long, 80cm wide and 90cm height.

HARD CHROME

ANODIZED:
- Natural
- Sparkly
- Co-Worker
- Red
- Black
- Orange
- Blue
- Golden
Tub 6m long, 90cm wide and 90cm deep.

ELECTRO POLISHED

ACABADOS ARELLANO MARTINEZ SA DE CV CERTIFICATIONS

Celaya, Guanajuato, Mexico ISO 9001-2015

GTO AUTOMOTIVE 116

 >INDIRECT SUPPLIER

ADILUB, S.A. DE C.V. is a company 100% Mexican. It was

founded on January 23, 1998, its main activity is the production
and marketing of lubricating oils and greases to meet the needs
of automotive, industrial and agricultural sectors.

It is located in the heart of Mexico in the city of San Francisco

del Rincón in the State of Guanajuato. Its facilities are within
a surface of 11,500 sq meters. Adilub started from the need to
offer high quality products to the market, Adilub lubricants have
been developed with the most advanced technology, they are
formulated with high quality, last generation additives and 100%
virgin oils, therefore you can say that the Adilub lubricants are truly
POWER IN MOTION

PRODUCT
Formulation of additives, antfreeze, brake fluids, as well as high
quality oil and greases to satisfy the needs of the market, complying
with national and international standards. Now, introducing the new
full synthetic oil line, Synthoil.

CAPABILITIES
Grease production capacity: 200,000 kg/month
Processing and packaging of oils: 4,000,000 lts/month
Raw material storage: 1,000,000 lts/month

MAIN DESTINATIONS
• Guatemala • Honduras
• El Salvador • Costa Rica
• Nicaragua

ADILUB, S.A. DE C.V. CERTIFICATIONS

San Fco del Rincon, Gto. Mexico
ESR
ISO 9001:2015

117 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

AJR is a pressures machine company installed in the city of

Celaya, Gto; that has been specialized in the manufacture
of devices and tools for important automotive interprises of
the region fulfilling the sector´s requirements.

Established since 2005 in the region, we have allowed to

consolidate us as a reliable company with our customers
such as: GKN Automotive (Mexico & USA), Würth Elektronik,
RPK Mexico, Coty Cosmetic, Multitech, Pistones Moresa.

The growth of the company has been achieved thanks the

effort of its collaborators, clients and support received from
private and financial instances.

PRODUCT
•  Clamping tools
•  Erosion cut
•  Gauges and fixtures

CAPABILITIES
• CNC Machining Centers • Conventional Lathes
• CNC Lathes • Conventional Milling Machines
• EDM

MAIN DESTINATIONS
•  United States of America •  Mexico

AJR MACHINE TOOLS, S.A. DE C.V. CERTIFICATIONS

Celaya, Gto., Mex. ISO 9001:2015

GTO AUTOMOTIVE 118

 >INDIRECT SUPPLIER

Boreal Metalworks is a leading sheet metal fabrication company based in Apaseo el Grande
Guanajuato. With over 10 years of experience attending 80+ clients from more than 10 different
industries processing 500+ tons of steel each year among its other materials.

Founded in 2009 as a powder coating company, we now specialize in sheet metal, with a wide array
of processes, incuding:
Sheet / Plate laser cutting Welding (TIG & MIG),
Profile / Tube laser cutting Hardware insertion
CNC bending, Painting both powder coating & liquid

Some of our clients include ACPS automotive, Onvio, Marmon Keystone, Plastic Air, 3D HUBS &
others. Processing parts for a variety of industries both national and international, turning us into one
of the leading companies of our market in the region

PRODUCTS
Sheet/Plate laser cutting: Welding:
3000 X 1500 mm sheet capacity TIG
Aluminium 14 mm (0.55´´) MIG
Stainless steel 20 mm (0.78´´) ABB Welding robot
Carbon Steel 25 mm (1.00´)
Copper & Brass 08mm (0.31´´) Hardware insertion:
Wood, MDF and various engineering plastics PEMS, STUDS, Revet nuts, etc.

Profile laser cutting: Painting:

BLM LT5 5’’ max diameter Sanblasting
CNC bending: Media blasting
LVD PPEB hidraulic 90 ton Powder coating atch line Optiflex Gema
LVD dynapress electric 24 ton equipment

CAPABILITIES
LASER CUTTING WELDING
Sheet/Plate laser cutting TIG and MIG
Aluminium 14 mm (0.55´´)
Stainless steel 20 mm (0.78´´) HARDWARE INSERTION
Carbon Steel 25 mm (1.00´) PEMS
Copper & Brass 08mm (0.31´´) PEM nuts
Wood, MDF and various engineering plastic Rivets
Tube cutting Max diameter 5´ Etc.

BENDING POWDER COATING

2,500 mm (max distance) 12 gauge / 2.66 8000 X 2000 X 2000 mm / 26´ X 6´ X 6´
mm(max gauge)

MAIN DESTINATIONS
•  Chicago Illinois •  Paris Ontario
•  Batavia Ohio

BOREAL METALWORKS SC CERTIFICATIONS

Apaseo el Grande Gto ESR
ISO 9001:2015

119 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

CAPRICORNIO INGENIERÍA is a manufacturer of

material conveyors and pedestal, overhead, floor and
matrix conveyors. Design, manufacture, installation, and
maintenance of material conveyors and roller conveyors;
manufacture of structures, metal racks, pneumatic
and electromechanical systems. Installation of robots,
telescopic booms, monorails, automation, control panels,
lighting systems, overhead traveling cranes.

PRODUCT
The design, production, manufacture, installation, and
commissioning of mechanical and electrical engineering
components for all types of conveyors, as well as the
maintenance, upgrading and machining of parts for their
assembly.

CAPABILITIES
Machining center with 3- to 5-axis high precision CNC
machines and detail parts capability, laser pantograph, profile
roller.

GRUPO DE INGENIERIA CAPRICORNIO, S.A. de C.V. CERTIFICATIONS

Silao, Gto. Mexico ISO 9001 - 2015

GTO AUTOMOTIVE 120

 >INDIRECT SUPPLIER

Dimaco Metalmecánica & Black Cat Engineering, is a

100% Mexican group with almost 20 years of experience and
technical capacity in the area of ​​design and manufacture of
containers, dollies and material handling equipment located
in Silao, Guanajuato, Mexico. We are the best option in
the Design, Manufacture and Maintenance of Racks and
Containers.

PRODUCT
• Racks • Pin Pallets
• Dollies • Dunnage EVA
• Conveyors • CNC Machining
• Minomies • Work tables
• Platforms • Wire baskets
• Hangers • Bag racks
• Containers • WIP
• Lean Systems • Pailery

CAPABILITIES
• Welding
• Cutting
• Bending
• Machining
• Galvanized

DIMACO METALMECANICA, S.A. DE C.V. CERTIFICATIONS

Silao, Guanajuato, Mexico MARCA GUANAJUATO

121 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

We started operations in May 2012. Our experience in the

industrial sector has allowed us to develop packaging that
generates savings in both materials and logistics costs. Our
benefits in service ensure a timely supply at all times.

Our mission is to provide packaging solutions to our clients

through the standardization of our processes, counting
as an organizational structure that allows us to give quick
answers and achieve long-term business relationships.

PRODUCT
We make any design of any size with or without internal
inserts. In addition, we carry out assembly studies where
we help to save transportation costs. Our product portfolio
includes:

• Industrial double or triple corrugated containers.

• Die-cut cardboard boxes.
• Trays and die-cut partitions
• ESD antistatic box
• Triple corrugated
• Slotted boxes
• Boxes with string King
• Laminated boxes printed in offset
• Box with tear tape
CAPABILITIES
Installed capacity 1,200 tons per month, we are currently
working at 60% of our capacity.

EKO EMPAQUES DE CARTON SA DE CV CERTIFICATIONS

Cortazar, Guanajuato. ISO 9001:2015
ACCREDITATION CLAUGTO

GTO AUTOMOTIVE 122

 >INDIRECT SUPPLIER

Elfer is a Mexican Company founded in 2000 with more

tan 200 employees in several business divisions such as,
material handling equipment, industrial maintenance, special
manufactures and more. We work closely with the main
automotive assembly in Mexico and some tier 1 and 2 as
Nemak, Flex and Gate, Hirotec, GM, Mazda, AAM, Michelin,
other such.

PRODUCT
•  Racks •  Ramps
•  Containers •  Work stations
•  Pallets •  Conveyors
•  Platforms •  Cantiliever

CAPABILITIES
We have a great quealifed team in Product Engineering,
Process Engineering, Quality Control, Technical Support
as well as certified operators our infrastructure allow the
developing of products from conceptual desing manufacturing
and maintenance during the life of the project.

We have blasting booths, CNC electrostatic painting booth,

bending cutting, laser and plasma cutting pantographs.

INDUSTRIAS METALICAS ELFER S. DE RL. DE CV. CERTIFICATIONS

Silao, Guanajuato, Mexico. ISO 9001:2015
DNV CERTIFICATION

123 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

We are a company with experience in the manufacture of

packaging products, which, thanks to the strict requirements
of the industry, flexibility, closeness and our experience,
has led EMPROPACK to be recognized for its high level of
service, and always with an improvement mindset.

We currently serve clients who require a high level of service,

quality and response to meet their demands and times, basic
needs to compete in a global market.

Main clients: DENSO, TOYODA, KTMEX, NISSIN, ASMO,

PLASESS, NSK, ISOCINDU, JCS CLIMAS.

Sectors served: Automotive, electronics and consumer.

PRODUCT
Manufacture of corrugated cardboard packaging, corrugated
plastic and integration of kiteo with other components
(wooden platform, cardboard platform, corner pieces, pe
foam, pu foam, eva foam, polybubble etc).

CAPABILITIES
We have cutters, die cutters, screen printing, press,
ultrasound sealer, storage, packaging management, SMI /
VMI system for deliveries.

EMPROPACK EMPAQUES PROFESIONALES S.A. DE C.V. CERTIFICATIONS

Irapuato, Guanajuato, Mexico / Tlaquepaque, Jalisco / San Antonio TX, USA ESR
EMPRESA DE MUJERES
ISO 9001:2015
ACCREDITATION CLAUGTO

GTO AUTOMOTIVE 124

 >INDIRECT SUPPLIER

FORTIPAK is a privately held Mexican company founded in 2009. We

produce high quality sheets, boxes and packaging made of corrugated
cardboard, micro-corrugated cardboard, corrugated plastic, wood and
hybrids.

With more than a decade of experience, we are experts in the design and
manufacturing of packaging for various industries including automotive,
footwear, food, agriculture and electronics.

PRODUCT
We produce different types of packaging:
• Cardboard containers. • Hybrid containers (Cardboard +
• Wooden containers. attachements such as Eva, Foam,
• Returnable containers. Corrugated Plastic, Polystyrene,
• Slotted boxes. etc.).
• Die-cut boxes. • Edge protectors.
• Cardboard tubes.

CAPABILITIES
Our facilities, which span over 8,000 m2 in Leon, Guanajuato and 3,000m2
in San Luis Potosi, host the processing, storage and safekeeping of raw
materials and finished goods. Our two locations are strategically located in
the heart of Mexico’s transportation hub connecting with major highways and
international ports.

FORTIPAK’s robust and diverse fleet allows timely delivery of products

nationwide. The company has a fleet of 6 units: two Freightliner trucks of
66m3 and 58m3, two ELF 600 trucks of 34m3, an ELF 300 truck of 18m3 and
a Nissan NP 300 truck.

MAIN DESTINATIONS
• Asia • North America
• Eastern Europe • South Amercia
• Western Europe

FORTIPAK S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato. Winner of the first place of the “2019 Guanajuato
Energy Sustainability Award: Category of
medium-sized industrial companies”

125 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

Gishner INC (Global Integration Solutions in Headway Networking and Enterprise

Robots) is an Mexican company founded on 2020 with the purpose of supporting
the automation and robotics needs of the industry in the region.

Our commitment is to develop integral projects that offer the highest quality
solutions to our clients, safeguarding the integrity of our employees through
their professional and human development, transmiting and sharing this with our
customers in the quality of the product and the cordial relationship between both
parties.

PRODUCT
Design, Manufacturing and Integration of Turn Key Projects, including
Robotic process, special process machinery, fixtures, EOAT’s, JIG’s, Marking
Laser Process. Our experience and expertise is to design a mechanical
and mechatronic integral solution to accomplish with our customer’s
specifications, using and applying them standards. Our process is to make a:

1 General Concept 5 Integrate all Control Components

2 Validate it with the customer 6 Programming of the equipment
3 Develop the final engineering 7 Final Validation
4 Manufacture the equipment 8 Installation of the equipment

CAPABILITIES
Our engineering team is made up of engineers specializing in mechanical and
mechatronic design with more than 10 years of experience in the development
of turnkey projects.

We have a 3,000m2 shop floor area for the integration of the projects with all the
facilities to the testing process.

Manufacturing process is supported by an 11,000 m2 working area where is

installed the following process: Plasma Cutting, Laser Cutting, GMAW Welding,
CNC Machining, Conventional Machining, Shotblast, Powder Coating.

GISHNER INC S DE RL DE CV
Silao de la Victoria, Guanajuato; Mexico

GTO AUTOMOTIVE 126

 >INDIRECT SUPPLIER

We are a 100% Mexican Company founded in 1991, located in the

city of Leon, Guanajuato.

Our mission is to develop the best automation equipment that

solve our customer’s need, through conceptualization, design,
technology integration, innovation, manufacturing and installation
with a high-quality service, honesty and integrity.

Our Main Costumers are mainly from Automotive Industry,

Powersports and Metal-Mechanic industry.
PRODUCT
•  Design and development of Welding: GMAW and SPOT,
engineering automation projects. Handling: High precision
•  Constructions equipment and handling and vision systems.
high precision tooling. •  Integration of automatic
•  Machining precision and high systems in general industry.
quality CNC. •  3D design, simulation,
•  Integration of Robotic prototyping and reverse
applications such as: Cutting: engineering services.
Water jet, Plasma and laser,

CAPABILITIES
• Dimensional measuring through FARO Arm Edge HD.
• Laser, Plasma and Water jet CNC Cutting Tables.
• CNC Machine centers.
• Cutting and Welding Robot.
• Manufacturing Department of Prototypes.

MAIN DESTINATIONS
•  USA •  Europe
•  Canada •  Latin America

AZIMATRONICS S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mex. MARCA GTO
ISO 9001-2015

127 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

Grupo Plasma Automation (GPA) is a Mexican company founded

in 1991. Dedicated to providing manufacturing process such as:
Laser Cutting, Plasma Cutting, Waterjet Cutting, CNC Bending,
Welding Process (GMAW), Conventional & CNC Machining and
Painting (Powder Coating) processes, Integration and Installation
of our own products and special products for any kind of industry.

Our Main Product is the design and fabrication of CNC Cutting

Tables with Laser, Plasma and Water-jet technology, our
machines are totally designed and manufactured in Mexico, that
is the reason why we are the leadership for cutting technology in
Mexico.

In GPA we also fabricate your special requirements offering

our manufacture processes and engineering design to provide
mechanical & electrical particular solutions into your products
with the highest quality for each one.
PRODUCT
• Laser CNC Cutting Table Plasma & WaterJet)
• Plasma CNC Cutting Table • Special Welding Process Service
• Water CNC Cutting Table (GMAW manual & robotic)
• Bevel CNC Cutting Table • Machining Process Service (CNC
• Distribution and commercialization and conventional)
of Plasma, Laser and Water-jet • Painting Process Service (Liquid
Consumables. and Powder coating).
• Cutting Process Service (Laser,

CAPABILITIES
• 5 Plasma Cutting Table in 3 shifts)
• 3 Laser Cutting Table • 10 Milling CNC Machines
• 2 WaterJet Cutting Table • Powder Coating Process
• Welding Process (60 workers • Stock of Consumables
MAIN DESTINATIONS
• USA • Latin America
• Canada • United Arab Emirates
• Europe

GRUPO PLASMA AUTOMATION, S.A. DE C.V. CERTIFICATIONS

Leon, Guanajuato. Mexico
MARCA GTO
ISO 9001:2015

GTO AUTOMOTIVE 128

 >INDIRECT SUPPLIER

We are a 100% Mexican Company founded in 1991 and part of

GPA (Plasma Automation Group).

As one of the most important companies in this region, we offer

high competitive products and services with turn key solutions
in the development of Fixtures, Precision Racks, Process Racks,
Checking Fixtures, etc., through conceptualization, design,
innovation, prototyping, manufacturing, integration and service
support.

Our Main expertise is focused in Automotive, Aerospace and

Metal-Mechanic industry.
PRODUCT
• Design and engineering of Racks, • High precision tooling.
Process Racks, Precision Racks, • Fabrication of Complex and simple
Fixtures and Checking Fixtures. Products (Fixtures-Racks)
• Full Manufacturing Process • Prototyping service (Made in
(Cutting, Welding, CNC Machining, Steel, Polymer)
Assembly, Dimensional Certification, • High Production Capacity (3
Automation, Delivery). Shifts, 7 D/W)

CAPABILITIES
• 1 Plasma Cutting Table
• 2 Laser Cutting Table
• 1 Waterjet Cutting Table
• Welding Process (30 workers in 3 shifts)
• 6 Milling CNC Machines

MAIN DESTINATIONS
•  USA •  Europe
•  Canada •  Latin America

INDUSTRIAS PLASMA CUT S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mex. MARCA GTO
ISO 9001-2015

129 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

Plasmatooling is a company part of GPA (Grupo Plasma

Automation) founded in 1991. Dedicated to providing high
precision CNC machining solutions and service through
the Development, Innovation and Transformation of the raw
material into a piece of high added value.

We offer particular solutions through reverse engineering in

costumers requirements and the manufacture of serial parts
for different industries; With all our equipments working in
3 shifts we would offer the best economic-time solutions.

PRODUCT
• CNC Machining Process with 3 and 4 axis capability.
• CNC Machining Parts for Automotive, Aerospace and Metal-
Mechanics Industry.
• CNC Machining parts for Fixtures, Precision Racks,
Automation equipment, High and Low precision equipment.
• 3 Shifts Capabitlity.
• Large Parts Machining 4 Axis (1800 mm x 4000 mm x 400 mm)
• Black Oxide Process
• Dimensional Validation (With Faro Arm and Laser Tracker)

CAPABILITIES
• 7 Doosan Milling CNC Machines working in 3 shifts
• 1 Router CNC Machines working in 3 shifts
• Measuring System: Faro Arm and Laser Tracker

MAIN DESTINATIONS
•  USA •  Canada

PLASMATOOLING S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mex.
ISO 9001:2015

GTO AUTOMOTIVE 130

 >INDIRECT SUPPLIER

We are a leading company with more tan 20 years of

experience in the design, manufacture and integration
of multiple projects, with a strong sense of service and
commitment with our clients.

PRODUCT
• Design and Manufacturing of Machinery and Equipment
• Automation & Control
• Precision Machined
• Metal Mechanics (trace, assembly and special welding)

GRAMO INDUSTRIAL INGENIERIA Y PROYECTOS, S. DE R.L. DE C.V. CERTIFICATIONS

Irapuato, Guanajuato DUNS
REPSE
ISO 9001:2015

131 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

We´re an engineering group with 11 years (date of

commencement: february 2011) of experience in industrial
services and maintenance, based in chihuahua and
guanajuato puerto interior to develop solution related
to coding, automation, design, integration, and the
manufacturing of basic and technical products for our
clients.

PRODUCT
Machining of parts for the food and automotive industry,
machining with manual or conventional handling, semi
automatic handling, cnc, design and manufacture of racks,
scrap containers, stainless steel furniture.

CAPABILITIES
We have the following available a machining center, milling
machines, conventional lathe, grinding machines, ovens,
cutting equipment, welding equipment, cnc.

MAIN DESTINATIONS
•  Mexico

GRUPO INDUSTRIAL PUERTO CERTIFICATIONS

Silao, Guanajuato ISO 9001 (IN PROCESS)

GTO AUTOMOTIVE 132

 >INDIRECT SUPPLIER

GTO TOOLING is a mexican company, founded in 1995

Guanajuato Tooling is a world class tooling supplier
producer automotive primary and secondary tooling for the
exterior and interior components.

With 2 facilities:
• GUANAJUATO: ENGINNERING / PRODUCTION /
SALES
• FLINT MICHIGAN: 3D PROTOTYPES PRODUCTION
AND SALES
PRODUCT
• Thermoforming tools •Welding process
• Checking fixtures • Vision Systems
• Water jet nest POKAYOKE
• Prototype 3d / 3d printer STATIONS
• Automatic assembly stations • Cmm lab
• Robot integration • Water jet cut service

CAPABILITIES
• Three and five axis cnc
• Water jet cut system 4 axis 10”x 4” x 7” tickness
• Max CNC PAPABILITIES 6 MTS X 2.8 MT / 12 TON
• 3D PRINTER 36” X 24” X 36”
• CMM MAX CAPABILITIES 4000 MM X 2700 MM X 1800 MM

MAIN DESTINATIONS
• United States of America • Europe
• Canada

GUANAJUATO TOOLING, S.A. de C.V. CERTIFICATIONS

Guanajuato, Gto., Mexico ISO 45001
ISO 9001:2005
ISO 14001

133 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

We are a Mexican Company located in Leon Guanajuato,

with more than 25 years of experience in Metal
Mechanics Industry. We offer to our costumers solutions
trough engineering development, fabrication, special
manufacturing, quality & logistics.

PRODUCT
Control Cabinets NEMA 3, 3R, 4X / Electrical Enclosures
NEMA 3, 3R, 4X / Core Clamps / Tanks / Containers /
Precision Racks / Design & Engineering / Powder Coating
/ Plate Rolling Machine / Bending / Machining / Assembly /
Certified Welding / Heavy Fabrication

CAPABILITIES
•  Control Cabinet 2, 3 & 4 Doors Nema 3-3R
•  Dry Transformer Cabinets Nema 1 Type 1-5 & Nema 3R
Type1-5
•  Plasma Cutting: Up to 2”Cutting capacity, working area 8´x
20’size
•  Powder Coating Oven: 3 x 3 x 10
•  Plate Rolling Machine: Up to 1” thickness
•  Bending Machine: 250 tons. / 400 tons.

MAIN DESTINATIONS
• USA • BRAZIL
• CANADA

GT STEEL S.A DE C.V CERTIFICATIONS

Leon, Guanajuato UL50
UL50E
USRUCA
ISO 9001-2015

GTO AUTOMOTIVE 134

 >INDIRECT SUPPLIER

HERRAMENTALES PRESS begins operations in 1991. We are

an enterprise who manufacture cutting dies for the industry (like
shoe, automotive, textile, etc.), dies for emboss and deboss, and
dies for the metal mechanic industry, injection molds and almost
any tooling for the general industry.

CUSTOMERS:
Yamato International Mexicana, Chiyoda Integre de Mexico,
Macauto Mexico, Kinugawa Mexico, Nishikawa Sealing de
Mexico, Relats de Mexico, VCST de Mexico, ADAC Strattec
de Mexico, ITT Motion Technologies Mexico, Foam Creations
Mexico, Kasai Mexicana, American Axle, Tokyo Roki de Mexico.

PRODUCT
• Cutting dies for leather, textil, cardboard, etc.
• Dies for emboss and deboss
• Dies for the metal mechanic industry
• Injection molds
• Fixtures
• Toolings for the general industry
• Digitized parts (model CAD in 2D and 3D)

CAPABILITIES
Lean Manufacturing System / Product design in MasterCAM and
Rhinoceros 3D / 6CNC Machines / Electro-erosive and lat surface
grinding / Conventional machines (mill, lathe, machining pantograph,
pantograph plasma, drill press, sand-blast) / Arm digitizer Rhinoceros
3D software interface, cutting plotter, Electric Tapping Arm.

MAIN DESTINATIONS
• United States of America • México
• Puerto Rico

HERRAMENTALES PRESS CERTIFICATIONS

Leon, Gto., Mexico ISO 9001
CLAUGTO
MEXICAN SOURCING QUALITY,
EXCELLENCE

135 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

Was formed in the year 2014. It is located in the city of

Leon Guanajuato, Mexico. The company is proudly part of
a Mexican group of enterprises focused in the packaging,
paper and plastic industries. We serve almost 100 tier 1,2
and 3 automotive companies located all over Mexico.

PRODUCT
We innovate through the design of corrugated plastic and
supplementary materials. We have a wide range of products,
from corrugated plastic boxes, customized packaging, pallets,
dunnage, agricultural products, plastic corrugated sheets,
displays and advertising.

CAPABILITIES
The 2,000 m2 plant has a prototyping room equipped with a CNC
router, three die cuting machines, one cardboard /plastic roller
blade slither, six Branson ultrasonic welding machines, premium
electrical installation, raw material and finish goods warehouse
areas and several hand riveter machines among other tooling.

MAIN DESTINATIONS
• United States of America

HIPERPACK S.A. DE C.V. CERTIFICATIONS

Plant: Leon, Guanajuato. Mexico ISO 9001:2015
Warehouse and Sales Office: Apodaca, Nuevo Leon. Mexico. DUN & BRADSTREET
MARCA GTO

GTO AUTOMOTIVE 136

 >INDIRECT SUPPLIER

Mexican owned company dedicated to offer complete packaging

solutions to every industry, starting operations in 2006. Our
headquarters are located in Leon, Mexico, with branches in San
Luis Potosi, Guadalajara, Queretaro and Torreon, and recently
expanded business into a new office in Houston, Texas. With
almost 20 years of experience we source different industries, such
as automotive, food, mining and technology among others. We
service the local, regional, domestic and international markets,
being our main export destinations, USA, Central America and
the Dominican Republic. We are a DUNS registered brand, we
are certified as “Marca Gto” as well, and in process to be certified
as an ISO 9001 company.

PRODUCT
We are specialized in all kind of packaging materials for every
industry, among our main products are: paper sheets and rolls
(Kraft, etc.), corrugated cardboard boxes (made to order), cardboard
cores, HDPE (High Density PolyEthylene) and LDPE (Low Density
PolyEthylene) bags and coils, natural, colored, or printed, adhesive
tapes, packaging equipment, shipping and tooling, packaging foam,
bubble, stretch film (industrial and FDA Approved), ribbons, labels,
security seals, shrink film, wood and plastic pallets, containers
(wood, plastic, metal, etc.)

CAPABILITIES
We offer a wide variety of services, such as inventory administration,
just in time deliveries, lean manufacturing, online processes,
sepecial design for packaging materials, scheduled deliveries and
many more.

MAIN DESTINATIONS
•USA •Dominican Republic
•El Salvador

INNOVACION EN EMPAQUES S. DE R.L. DE C.V. CERTIFICATIONS

Leon, Guanajuato, Mexico MARCA GTO
ISO 9001 (TO BE CERTIFIED IN 2022)

137 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

We are a mexican company dedicated to the metal-

mechanical sector, our objetives is to provide the best
design service, equipment manufacturing, parts and
continuous improvement projects for different sectors of
industry. We have 14 years of experience.

Our sells:
- Material handling equipment like dollies, racks, metal
reels, pallets, etc.
- Pieces and parts for refurbishment
- Machined parts
Main customers:
• Toyota • AAM • DJK Mexico
• Dana International • Adac Strattec
• Dina • Oshkosh Corp • Among others
• DeAcero • Pirelli
PRODUCT
• Mechanical design
• Material handling
• Component manufacturing services

CAPABILITIES
• 200 tons per month

MAIN DESTINATIONS
• United States of America • Argentina
• Canada • Chile
• Brazil • Spain

INMEKHA INGENIERIA SA DE CV CERTIFICATIONS

Leon, Gto ISO 9001-2015 (IN PROGRESS)

GTO AUTOMOTIVE 138

 >INDIRECT SUPPLIER

We are Mexican ISO 9001 certified company, that manufactures specialized

high quality packaging. We use materials such as corrugated plastic, carboard,
polyethylene, wood and paper, in order to fabricate customized solutions.

Our main goal. is to protect what´s inside our boxes, that´s why we like to work
together with our clients to meet all specifications and requirements. We focus
on fast delivery, functionality and cost reduction.

More than 100 automotive companies trust in us, because our infrastructure
and services are planned and designed to attend the the industry. Due to this
we have been validated as a reliable supplier by the CLAUGTO for 4 years in
a row.
PRODUCT
• Printed/non printed REGULAR SLOTTED (RSC) boxes
• Triple or multi wall cardboard gaylords or containers
• Grids or partitions
• Die-cut boxes
• Printed/non printed carton cores/tubes
• Printed/non printed edge protectors
• PE Bags (rolls/bulk)
• Pre-open (kangaroo) bags
• New/recycled wooden pallets
• Corrugated cardboard/plastic pallets
• Packaging accessories (foam, bubble wrap, stretch film,
adhesive tapes)

CAPABILITIES
Manufacture of
• Carboard: single, double, triple wall corrugated. In flutes C,B,F,A. Small and big formats.
• Corrugated plastic: single wall 2mm to 10 mm. Small and big formats.
• Carton core: 1 in to 6.5 in internal diameter. 1.75 to 9mm thickness. 7 cm to 300 cm long.
• Edge protector: 1.5 in wing – 4 in wing width. 1.79mm to 9mm thickness. 7cm to 300 cm
long.
• Wooden pallets: new/recycled.
• Plastic bag: virgin, recycled, biodegradable materials (50 to 1200 m width).

MAIN DESTINATIONS
• USA • Belgium • Korea
• Canada • Germany • China
• France • Japan

MERCA CARTON S.A. DE C.V. CERTIFICATIONS

Leon, Gto. D-U-N-S NUMBER: 812818452
ACCREDITED CLAUGTO
ISO:9001:2015
MARCA GTO

139 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

NOVATEC PAGANI is the leading company in the design

and manufacture of plastic containers and pallets in Mexico.
The company began operations in January of 1981 in the
city of Leon, This prosperous city is allocated in the central
region of the country. Furthermore, its strategic position
allows the company to rapidly respond to the market
requirements in any part of the country. Additionally, export
activities to the United States, Central and South America
are easily led from this strategicsite. Our main goal is satisfy
our customers’ needs finding solutions to the handling,
manoeuvre, distribution and storage of the goods that are
offered by the company.

PRODUCT
• Plastic pallets • Plastic corrugated
• Automotive containers • Bulks

CAPABILITIES
Plastic Injection, 53 injection molding machines with capacities from
65 to 3,000 tons, give us the power to quickly produce any order with
the highest quality in the market.

MAIN DESTINATIONS
• United Kingdom •Peru
• Guatemala • United States of America
• Costa Rica

NOVATEC PAGANI, S.A. DE C.V. CERTIFICATIONS

Leon, Gto. ISO 9001:2015

GTO AUTOMOTIVE 140

 >INDIRECT SUPPLIER

We are a proudly Mexican company, dedicated to the

manufacture of industrial fluids and lubricants for machining,
and the marketing of tools and equipment for changing and
repairing windshields.

The quality of our products, perseverance, commitment, and

solutions that we provide to our customers have allowed us
to have a track record of more than 20 years in the market.

Some of our main clients:

• GKN (DANA) • NEXTEER
• PISTONES • IRIZAR
• MATIC (GRUPO CIE) • ETN
• PEMSA • ADO
• TREMEC

PRODUCT
• Industrial fluids and lubricants. Synthetic, semi-synthetic
and mineral lubricants (additives,bactericides, corrosion
inhibitors, Quench). Environmentally friendly.
• Glasweld tools, Equalizer tools, Dupont, and more.

CAPABILITIES
Our trained technicians work under the quality standards
that the industry demands of us. We currently produce up to
5,000 liters of our products, available in presentations of 20,
203 and 233 kg.

NUFER PLUS, S.A. DE C.V. CERTIFICATIONS

Celaya, Guanajuato ISO 9001:2008
MARCA GTO

141 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

ORBINGENIERIA is a Mexican company specialized in the field of

plate heat exchangers (coolers, pasteurizers, heaters, evaporators,
condensers, etc...), that offers new equipment design, spare parts and
maintenance in its various forms (preventive, corrective, urgent). The
consolidation of our area of expertise allow us to offer a full comprehensive
service to our clients in our discipline, and can you delegate to a single
company and a single responsible, all the activities related to plate heat
exchangers, both supply, commissioning, testing and training, with the
specialist staff who have to their credit, a long experience with over 20
years in this kind of heat exchange equipment. Exclusive representatives
of the Kelvion brand.
PRODUCT
A heat exchanger is a static mechanical element that makes the transfer of
thermal energy (heat or cold) between two or more fluids, these are separated
by metal plates, through which the heat exchange is made, and sealed to the
outside through some fluids and temperatures compatible elastomer which
operates the equipment.

CAPABILITIES
Technical advantages. We can make calculation equipment needed most
innovative on the market with technology and size required. Gasket free of
glue, better pressure and further lifetime support, as well as other benefits
based on any specific requirement.

Economic advantages. Orbingenieria is the only company in Mexico with

presses to manufacture a equipment that is 100% made in Mexico, we have
a great price, we do not sell as distributors, or as an assembly company, we
make it as manufacturers.

Advantages in delivery times. Our times are reasonably short since you
can start working with the requirements at the moment, there is no need to
wait for suppliers.
MAIN DESTINATIONS
• United States of America • Central America
• Canada • South America
• Colombia

ORBINGENIERIA S.A. DE C.V. CERTIFICATIONS

Celaya, Guanajuato. ISO 9001:2008
ISO 9001:2015

GTO AUTOMOTIVE 142

 >INDIRECT SUPPLIER

SIMSA is a company founded in 1982 dedicated mainly to metal-

mechanical manufacturing with derivation to Precision Machining
and Industrial Paileering. In 2014 SIMSA was stablished as
a general partnership kind of business. Some of our major
customers are: Michelin, Serviacero, Newman, Pirelli & Futura.

PRODUCT
We are a company specialized in Precision Machining with
Computerized Numerical Control (CNC), conventional machining,
complex and engineering designs, flat surface grinding, reverse
engineering, as well as industrial paileering.

CAPABILITIES
We have high-tech machinery, highly trained engineering personnel
and specialized labor. Our strength in machinery capacity has 3 and
4 axis Machining Centers, CNC lathes, laser cutting, water cutting,
conventional lathes and milling machines, special welding and
project integration, among others.

MAIN DESTINATIONS
• United States of America

SOLUCIONES EN INGENIERÍA Y MANUFACTURA SALAS S.A. DE C.V.

Leon, Guanajuato

143 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

SONDERN Engineering + Design was founded in March 2015 to meet

consulting and design needs of the plastic and metal-mechanic industry.

We supply different kinds of industries, design, development, machining,

automation, inspection and reverse engineering services as well as
development of new products, always aiming for perfection through
innovation.

Main customers:
• Volkswagen • Ryobi
• Honda Lock Mexico • Kasai
• Denso • Arbomex

Among others, for which we meet the requirements of 3D scans, as well

as fixtures, gauges, jigs and spare parts.

PRODUCT
Design, manufacture and inspection of:
• Fixtures • Automation of quality processes
• Gauges • 3D scanning and inspection
• Workholdings solutions
• Jigs • Industry 4.0 solutions

CAPABILITIES
• Design and inspection department.
• CNC machining centers.
• CNC lathes
• Conventional lathes.
• Conventional milling machines.
• GOM 3D Scanner.

MAIN DESTINATIONS
•  Mexico
•  United States

SONDERN INGENIERIA Y DISEÑO S.A. DE C.V. CERTIFICATIONS

Leon, Gto., Mex. MARCA GTO
ISO 9001:2008 (IN PROCESS)
ISO/IEC 17025:2018 (IN PROCESS)

GTO AUTOMOTIVE 144

 >INDIRECT SUPPLIER

TIERRA TECH® is an international leading company in the

manufacturing and commercialization of Ultrasonic Cleaning
Equipment and Systems.

We have two production plants, one in Europe and another in

America, and an extensive network of distributors that gives us
presence in more than 30 countries.

Our highly qualified technical and commercial teams enable us to

offer personalized service and advice, as required by needs of each
client.

We have a very aggressive R&D department that diligently works to

solve our clients challenges in the cleaning process.

PRODUCT
TIERRA TECH® develops complete ultrasonic cleaning machines
adapted to the particular needs of each sector: from the automotive
industry; electronics, aeronautics, or metallurgy, etc.

CAPABILITIES
TIERRA TECH® uses the latest and most advanced generation of
industrial machinery to ensure a continuous and strict control of cost
efficiency, in an ongoing quest for innovation with maximum levels
of quality.

MAIN DESTINATIONS
• United States of America • Australia
• Europe • Middle East
• Central and South America • Africa

TIERRA TECH DE MEXICO S.A. DE C.V . CERTIFICATIONS

Celaya, Guanajuato ISO 9001-2008

145 GTO AUTOMOTIVE

>INDIRECT SUPPLIER

Utz is globally operating specialist for the development,

manufacture and distribution of plastic-made reusable
packaging system for transport, warehousing and
intralogistics, as well as for technical parts for professional
applications.

Utz started operations in San Miguel de Allende,

Guanajuato.
PRODUCT
•  Individual customer solutions. •  Plastic pallets & Stacking frames
•  Component holders & trays •  Collapsible Pallet boxes
•  Stacking containers •  Dollies
•  Space-saving containers

CAPABILITIES
• Thermoforming in different materials such as: ABS, ABS – TPU,
HDPE, PE, PSEL, PETG.
• All our stacking containers have imperial footprint (SLC) and
metric footprint (RAKO)
• Collapsible pallet boxes footprints: 32x30, 48x45 with different
heights.
• All our solutions can be electrically conductive products (ESD) for
electronic industry.
• General Accessories (Lids, Hot stamps, Labels, Placards, clips,
etc)

MAIN DESTINATIONS
Utz is a worldwide company with locations in:
•  Switzerland •  UK
•  Germany •  USA
•  Poland •  China
•  France •  Mexico

GEORG UTZ DE MEXICO S. DE R.L. DE C.V. CERTIFICATIONS

San Miguel de Allende, Guanajuato, Mex. ALL OUR PRODUCTS
MEET THE AIAG RC-9
SPECIFICATIONS AND VDA
STANDARDS

GTO AUTOMOTIVE 146

 >INDIRECT SUPPLIER

Worldwide Foam was founded with a relentless focus on

providing XLPE customers with the product they need, when
they need it. Short lead times on buns and sheets as well as
the widest range of sizes and densities available. Worldwide
Foam ensures that our customers never have to worry about
having the product they need.

Since 2008 we have expanded to seven locations as well as

other product lines to include XLPE rolls, extruded PE and
Elastomeric materials. We are constantly expanding our
servicing capabilities to supply you the best options for your
press ready goods.

PRODUCT
We offer a wide variety of XLPE buns and rolls.

CAPABILITIES
We have the capacity to turn buns into rolls, apply PSA
(Pressure Sensitive Adhesive) and Heat Laminate different
densities, thicknesses to create a two-layer structure.

MAIN DESTINATIONS
•  Elkhart Indiana •  El Paso Texas
•  Atlanta Georgia •  Mentor Ohio
•  Ontario California •  Laredo Texas
•  Ontario Canada •  Wurtland Kentucky

WORLDWIDE FOAM S DE RL DE CV
Silao, Guanajuato

147 GTO AUTOMOTIVE

SERVICES
SUPPLIERS
>SERVICE SUPPLIER

INSUMA Quality Solutions, founded in 2017, is a regional leader in

quality control services, with focus in inspection, sorting and rework
activities. Our quality inspectors team, will be on your location
within 2-24 hours attending your quality issue.

INSUMA Quality Solutions serves to automotive OEM’s and auto-

parts manufacturers.

The mission of the company is to provide quality control services,

including inspection and rework, through a highly committed team
aimed to achieve the goals established with our clients.

Our vision is to be identified by our clients as the best option to

solve their needs in quality control field.

SERVICES
• Inspection, Sorting and Rework • On Site Quality Representation
• Containment • Temporary warehousing
• Launch Support

CAPABILITIES
• Inspection on site available 24 hours x 7 days.
• Personnel and inspection hours according to customer requirements.

MAIN DESTINATIONS
•  USA •  Canada •  Japan

INSUMA QUALITY SOLUTIONS S DE RL DE CV CERTIFICATIONS

Irapuato, Guanajuato. Mexico ISO 9001:2015

GTO AUTOMOTIVE 150

 >SERVICE SUPPLIER

Monitorapp®️ (operations since 2012), is the first IIoT platform

in Latin America that integrates a simple cloud technology
solution for industrial digitization of manufacturing plants.
We digitize more than 35 performance indicators such as
OEE and more than 60 process variables through the non-
invasive installation of sensors in production equipment,
with an average 3 month ROI. Monitorapp is used in a wide
variety of sectors such as:

• Automotive industry • Plastic Injection

• Biomaterials • Packaging
• Electronics • Tanning and Finished
• Metallurgy Leather

PRODUCT
Industrial platform for real time visualization, monitoring
and measurement of production data through simple, non-
invasive installation technology; ideal for IMMEX, ISO, and
IATF compliance.

CAPABILITIES
OEE Monitoring, Daily report, KPIs, Widgets, Customized
Dashboards, Sensor monitoring, Comments, Notifications.
Anomalies detection by process variables.

MAIN DESTINATIONS
• EUROPE • USA

MONITOR APP® CERTIFICATIONS

Irapuato, Guanajuato AWS PARTNER

151 GTO AUTOMOTIVE

Plaza la Paz No. 100
Puerto Interior P.O. Box 36275
Silao, Guanajuato
Tel. +52 (472) 215 2000
Exportel. (sin costo) 01 800 263 6231

info@gto-automotive.com www.gto-automotive.com
www.cofoce.guanajuato.gob.mx