Atlas Copco: Parts List
Atlas Copco: Parts List
Atlas Copco: Parts List
Oil-injected compressors
Parts List
Atlas Copco
Oil-injected compressors
Parts List
Edition: 1
Use only authorized parts. Any damage or malfunction caused by the use
of unauthorized parts is not covered by Warranty or Product Liability.
01/07/2015
No. 2930 1877 00
www.atlascopco.com
Table of Contents
Instructions ................................................................................................................................... 3
1 Service Kits ........................................................................................................................... 18
2 Oil............................................................................................................................................22
3 Compressor Element.............................................................................................................. 24
4 Gearbox ................................................................................................................................. 26
5 Motor coupling .......................................................................................................................28
6 Motor Support ........................................................................................................................30
7 Air Inlet .................................................................................................................................. 32
8 Valves on element .................................................................................................................36
9 Air Receiver ...........................................................................................................................38
10 Air outlet - Air Cooled Pack................................................................................................. 44
11 Air outlet - Air Cooled Full feature....................................................................................... 46
12 Air outlet - Water Cooled Pack.............................................................................................48
13 Air outlet - Water Cooled Full feature.................................................................................. 50
14 Oil system............................................................................................................................. 52
14.1 Element and vessel connections Aircooled with energy recovery............................... 52
14.2 Element and vessel connections Aircooled without energy recovery.......................... 54
14.3 Element and vessel connections GA110VSD Watercooled with / without energy
recovery................................................................................................................................. 56
14.4 Element and vessel connections GA132VSD,GA160VSD, Watercooled with energy
recovery................................................................................................................................. 58
14.5 Element and vessel connections GA132VSD,GA160VSD, Watercooled without energy
recovery................................................................................................................................. 60
14.6 Filter and connections Aircooled................................................................................. 62
14.7 Filter and connections Watercooled............................................................................ 64
14.8 Thermostat - 8.5/8.6 Bar............................................................................................. 66
14.9 Thermostat - 10/10.4/13.8/14 Bar............................................................................... 68
14.10 Energy recovery ....................................................................................................... 70
14.11 Energy Recovery - Thermostat ................................................................................ 74
15 Cooling System.....................................................................................................................76
15.1 Cooler Assembly Aircooled Pack GA110VSD............................................................. 76
15.2 Cooler Assembly Aircooled Full Feature GA110VSD.................................................. 78
15.3 Cooler Assembly Aircooled GA132VSD,GA160VSD...................................................80
15.4 Cooler Assembly Watercooled GA110VSD................................................................. 82
15.5 Cooler Assembly Watercooled GA132VSD,GA160VSD..............................................84
15.6 Fan Assembly Aircooled..............................................................................................86
15.7 Fan Assembly Watercooled.........................................................................................88
16 Water System....................................................................................................................... 90
17 Drain Assembly - Pack.........................................................................................................92
18 Drain Assembly - Full Feature............................................................................................. 94
19 Control System Aircooled..................................................................................................... 96
2930 1877 00 1
Table of Contents
2 2930 1877 00
Instructions
EN - English
1 ORDERING PARTS
Always specify the part number, the name and quantity of the required items, as well as the type and serial number
of the machine.
2 COLUMN INFORMATION
Ref - Reference number: links a specific part from the list to the drawing. Only parts with a reference number are
shown in the drawing. Parts in the drawing without a reference number are simply there to illustrate the assembly.
Part number - Part number to be used when ordering spare parts.
When no part number is specified, the component is not available as a spare part.
Parts which are contained in a kit will have the kit number mentioned on the line below. For complete content of the
kit see chapter “1 - Service kits”.
A part number preceded by a black dot is comprised in the assembly right above.
Remarks: Additional information to the part number right above.
Substituted by: The part number right above has been replaced by another part number due to an update or revision.
Qty - Quantity: Indicates the number of parts in relation to the corresponding reference number. „AR“ means „As
required“: quantity or number to be determined.
Name - Part name: Translations of the English names can be found in document “Glossary of part names”.
Validity - Defines the timeframe and type/version of the machines the part is valid for. Clarification of the codes
used in the validity pattern can be found in the legend at the bottom of the page. A validity pattern mentioned in the
chapter title applies to the whole chapter. A plus sign in the pattern is to be interpreted as ‘and’, a comma as ‘or’.
Parentheses group the validity codes, similarly to mathematical parentheses, see following example:
‘PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)’ is valid for machines with 8 bar working
pressure and 50Hz frequency and 500V supply voltage, or 8 bar working pressure and 60Hz frequency and 575V
supply voltage.
EL – Reference to the drawing or the component inside the electric cubicle.
R. – Remarks: Extra information about the part. Explanation can be found at the bottom of the page.
BG - български
1 ПОРЪЧКА НА ЧАСТИ
Винаги цитирайте номера на частта, наименованието и количеството на необходимите изделия, както и типа и
серийния номер на машината.
2 ИНФОРМАЦИЯ В КОЛОНИТЕ
Ref - Референтен номер: свързва дадена част от списъка с чертежа. На чертежа са показани само части с
референтен номер.
Частите на чертежа без референтен номер са там, единствено за да се покаже възелът.
Part number - Номер на частта, който да се използва при поръчката на резервни части.
Ако не е посочен номер на частта, компонентът не се предлага като резервна част.
Частите, които се съдържат в даден комплект, ще включват номер на комплекта на долния ред. За пълното
съдържание на комплекта вижте глава „1 – Service kits“.
Номер на част, пред който има черна точка, се съдържа във възела непосредствено по-горе.
Remarks: Допълнителна информация за частта – непосредствено по-горе.
Substituted by: Номерът на частта непосредствено по-горе е заменен от друг номер на частта поради
актуализация или ревизия.
Qty - Количество: Посочва броя на частите във връзка със съответния референтен номер. „AR“ означава „Според
нуждата“: количеството или броят ще бъдат определени допълнително.
Name - Име на частта: превод на английските имена можете да откриете в документа „Glossary of part names“.
Validity - Определя периода и типа/версията на машините, за които частта е валидна. Обяснение на елементите
от кода, използвани в кода за валидността, можете да откриете в легендата в долната част на страницата.
Кодът за валидността, посочен в заглавието на главата, се отнася за цялата глава. Знакът плюс в кода се
приема за „и“, а запетаята – за „или“. Скобите групират елементите на кодовете за валидност подобно на
математическите скоби, вижте следния пример:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ е валидно за машини с работно налягане
8 bar, честота 50 Hz и захранващо напрежение 500 V или работно налягане 8 bar, честота 60 Hz и захранващо
напрежение 575 V.
EL – Референция към чертежа или компонента в електрическата кутия.
R.. – Забележки: допълнителна информация относно частта. Обяснения можете да намерите в долната част на
страницата.
2930 1877 00 3
Instructions
BR - Brasileiro
1 ENCOMENDANDO PEÇAS
Sempre especifique o número da peça, o nome e a quantidade dos itens necessários, assim como o tipo e o número de
série da máquina.
Páginas marcadas com o símbolo Serviço - “ “ contêm peças do(s) Kit(s) de serviço. Para conhecer o conteúdo completo
do kit, consulte o capítulo “1 - Service kits” (1 - Kits de
serviço).
2 INFORMAÇÕES SOBRE AS COLUNAS
Ref. - Número de referência: indica onde está uma peça específica listada no desenho. Somente peças com número de
referência são mostradas no desenho. As peças no desenho que
não têm um número de referência destinam-se simplesmente a ilustrar o conjunto.
Part number - Número da peça: se nenhum número de peça estiver especificado, o componente não está disponível
como peça sobressalente. Uma linha mostrada em negrito é um
conjunto. Uma peça cujo número seja seguido por um ponto preto faz parte do conjunto impresso em negrito
imediatamente acima dela.
O símbolo “<<< >>>” direciona para outra lista com o mesmo título, como “Name” (Nome).
Quando o número de peça específico é colocado abaixo da linha “Ref.”/”Name” (Ref. / Nome), é preciso escolher o tipo/
versão da máquina.
Qty - Quantidade: indica o número de peças e os números de referência correspondentes. “AR” significa “As
required” (Conforme solicitado): a quantidade ou o número a ser
determinado.
Name - Nome da peça: as traduções dos nomes em inglês podem ser encontradas no documento “Glossary of part
names” (Glossário de nomes de peças).
Remarks - Observações - Informações extras sobre a peça.
Uma série de letras pode indicar que uma determinada peça é certificada pelo órgão autorizado específico, de acordo
com os códigos ou as regras da lista.
As medidas são fornecidas em milímetros.
CS - čeština
1 OBJEDNÁNÍ DÍLŮ
Vždy uveďte číslo dílu, název a množství požadovaných položek a také typ a sériové číslo stroje.
2 INFORMACE VE SLOUPCÍCH
Ref – Referenční číslo: Propojuje konkrétní díl ze seznamu s výkresem. Pouze díly s referenčním číslem jsou zobrazeny
na výkresu. Díly bez referenčního čísla, které jsou na výkresu uvedeny, slouží pouze jako ilustrace.
Part number – Číslo dílu se používá pro objednávání náhradních dílů.
Pokud není uvedeno žádné číslo dílu, komponenta není k dispozici jako náhradní díl.
Díly obsažené v sadě mají na následujícím řádku uvedeno číslo sady. Úplný obsah sady viz kapitolu „1 – Service kits“.
Díl s číslem, před kterým je černý puntík, je obsažen v sestavě přímo nad ním.
Remarks: Další informace k číslu dílu přímo nad ním.
Substituted by: Číslo dílu přímo nad ním bylo nahrazeno jiným číslem dílu v důsledku aktualizace nebo revize.
Qty – Množství: Indikuje počet dílů pro odpovídající referenční číslo. „AR“ znamená „As required“ (Podle potřeby):
množství nebo počet bude určen.
Name – Název dílu: Překlady anglických názvů naleznete v dokumentu „Glossary of part names“.
Validity – Definuje časový rámec a typ/verzi strojů, na které se daný díl vztahuje. Objasnění kódů použitých ve
vzorci platnosti naleznete v legendě na konci stránky. Vzorec platnosti uvedený v názvu kapitoly se vztahuje na celou
kapitolu. Znaménko plus ve vzorci se interpretuje jako „a“ a čárka jako „nebo“. Závorky seskupují kódy platnosti,
obdobně jako matematické závorky, viz následující příklad:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ platí pro stroje s provozním tlakem 8 bar,
frekvencí 50 Hz a napájecím napětím 500 V nebo pro stroje s provozním tlakem 8 bar, frekvencí 60 Hz a napájecím
napětím 575 V.
EL – Reference na výkres nebo komponentě uvnitř elektrického rozvaděče.
R. – Poznámky: Doplňující informace o dílu. Vysvětlení naleznete na konci stránky.
4 2930 1877 00
Instructions
DA - Dansk
1 BESTILLING AF DELE
Angiv altid styknummeret, navnet på og antallet af de ønskede varer samt typen og serienummeret for maskinen.
2 OPLYSNINGER TIL KOLONNERNE
Ref - Referencenummer: Knytter en bestemt del fra listen til tegningen. Kun dele med et referencenummer vises på
tegningen. Dele på tegningen uden et referencenummer er blot medtaget for at vise samlingen.
Part number - Styknummer, der skal bruges ved bestilling af reservedele.
Hvis der ikke er angivet et styknummer, fås komponenten ikke som reservedel.
Dele, der er indeholdt i et sæt, har sætnummeret stående på linjen nedenfor. Se kapitel "1 – Service kits" for at få
vist hele indholdet af sættet.
Et styknummer med en sort prik foran indgår i samlingen lige ovenfor.
Remarks: Der findes yderligere oplysninger til styknummeret lige ovenfor.
Substituted by: Styknummeret lige ovenfor er blevet erstattet af et andet styknummer i forbindelse med en
opdatering eller en revidering.
Qty - Antal: Angiver antallet af dele, der hører til det tilsvarende referencenummer. "AR" står for "As required":
Antallet eller nummeret skal fastsættes.
Name - Navn på del: Oversættelser af de engelske navne kan findes i dokumentet "Glossary of part names".
Validity - Angiver tidshorisont og maskintype/-version, som delen gælder for. Forklaringer til koderne, der anvendes
i modellen for gyldigheden, kan findes i teksten nederst på siden. En model for gyldigheden, der er nævnt i kapitlets
titel, gælder for hele kapitlet. Et plustegn i modellen skal fortolkes som et "og", og et komma som et "eller".
Parenteser inddeler koderne, der beskriver gyldigheden, på samme måde som parenteser i matematik. Se følgende
eksempel:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ gælder for maskiner med et arbejdstryk
på 8 bar, en frekvens på 50 Hz og en forsyningsspænding på 500 V eller for maskiner med et arbejdstryk på 8 bar, en
frekvens på 60 Hz og en forsyningsspænding på 575 V.
EL – Refererer til tegningen eller komponenten inde i elskabet.
R. - Bemærkninger: Yderligere oplysninger om delen. Forklaringer kan findes nederst på siden.
DE - Deutsch
1 TEILE BESTELLEN
Geben Sie immer genau die Teilenummer, den Namen und die Anzahl des gewünschten Artikels und den Typ und die
Seriennummer der Maschine an.
2 SPALTENINFORMATION
Ref - Referenznummer: Verknüpft ein spezifisches Teil der Liste mit der Zeichnung. Es werden nur Referenznummern
in der Zeichnung gezeigt. In der Zeichnung dargestellte Teile ohne Referenznummer sind einfach nur zu
Illustrationszwecken der Baugruppe abgebildet.
Part number - Die Teilenummer wird bei der Bestellung von Ersatzteilen angegeben.
Ist keine Teilenummer angegeben, ist die Komponente nicht als Ersatzteil verfügbar.
Bei Teilen, die zu einem Set gehören, wird die Setnummer unten auf der Linie angegeben. Zum kompletten Inhalt des
Sets siehe Kapitel „1 – Service kits“.
Eine mit einem schwarzen Punkt versehene Teilenummer ist in dem direkt darüber stehenden Set enthalten.
Remarks: Zusätzliche Informationen zur Teilenummer stehen direkt darüber.
Substituted by: Die direkt darüber stehende Teilenummer wurde aufgrund einer Aktualisierung oder Überarbeitung
durch eine andere Teilenummer ersetzt.
Qty - Anzahl: Gibt die Anzahl der Teile im Verhältnis zur entsprechenden Referenznummer an. „AR“ steht für „Nach
Bedarf“: Anzahl oder Nummer muss noch angegeben werden.
Name - Teilename: Übersetzungen der englischen Bezeichnungen finden Sie im Dokument „Glossary of part names“.
Validity - Gibt den Zeitrahmen und den Typ/die Version der Maschine vor, für die die Teile gültig sind. Eine
Erläuterung der Codes, die für das Gültigkeitsmuster angewandt werden, finden Sie am Fuß der Seite. Ein im
Kapiteltitel genanntes Gültigkeitsmuster bezieht sich auf das gesamte Kapitel. Ein Pluszeichen im Muster steht
für „und“, ein Komma für „oder“. Klammern fassen die Codes in Gruppen zusammen, ähnlich wie bei mathematischen
Klammern. Siehe dazu folgendes Beispiel:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ ist für Maschinen gültig mit 8 bar-
Betriebsdruck, 50 Hz-Frequenz und 500 V-Versorgungsspannung oder 8 bar-Betriebsdruck, 60 Hz-Frequenz und
575 V-Versorgungsspannung.
EL – Referenz zu der Zeichnung oder dem Bauteil im Inneren des Schaltkastens.
R. – Anmerkungen: Zusatzinformationen zum Teil. Erklärungen finden Sie am Fuß der Seite.
2930 1877 00 5
Instructions
EL - ελληνικά
1 ΠΑΡΑΓΓΕΛΙΑ ΑΝΤΑΛΛΑΚΤΙΚΩΝ
Πρέπει πάντα να προσδιορίζετε τον κωδικό εξαρτήματος, την ονομασία και την ποσότητα των απαιτούμενων
ειδών, καθώς και τον τύπο και τον αριθμό σειράς του μηχανήματος.
2 ΠΛΗΡΟΦΟΡΙΕΣ ΓΙΑ ΤΙΣ ΣΤΗΛΕΣ
Ref - Κωδικός αναφοράς: συσχετίζει ένα συγκεκριμένο εξάρτημα από τη λίστα με το σχέδιο. Μόνο εξαρτήματα
που έχουν κωδικό αναφοράς εμφανίζονται στο σχέδιο. Τα εξαρτήματα στο σχέδιο που δεν έχουν κωδικό αναφοράς,
υπάρχουν απλώς για την εικονογράφηση του συγκροτήματος.
Part number - Κωδικός εξαρτήματος, ο οποίος χρησιμοποιείται κατά την παραγγελία ανταλλακτικών.
Όταν δεν αναφέρεται κάποιος κωδικός εξαρτήματος, το εξάρτημα δεν διατίθεται ως ανταλλακτικό.
Για τα εξαρτήματα που περιέχονται σε κιτ, ο αριθμός του κιτ θα αναφέρεται στην παρακάτω γραμμή. Για το
πλήρες περιεχόμενο του κιτ, βλ. κεφάλαιο "1 – Service kits".
Όταν μπροστά από τον κωδικό εξαρτήματος υπάρχει μια μαύρη κουκίδα, το εξάρτημα περιέχεται στο συγκρότημα
που βρίσκεται ακριβώς από πάνω.
Remarks (Παρατηρήσεις): Πρόσθετες πληροφορίες για τον κωδικό εξαρτήματος ακριβώς από πάνω.
Substituted by (Έχει αντικατασταθεί από): Ο πιο πάνω κωδικός εξαρτήματος έχει αντικατασταθεί από άλλο
κωδικό εξαρτήματος λόγω ενημέρωσης ή αναθεώρησης.
Qty - Ποσότητα: Δείχνει τον αριθμό των εξαρτημάτων σε σχέση με τον αντίστοιχο κωδικό αναφοράς. Το "AR"
σημαίνει "As required" (Αναλόγως των απαιτήσεων): η ποσότητα ή ο αριθμός θα πρέπει να προσδιοριστούν.
Name - Ονομασία εξαρτήματος: Μεταφράσεις των ονομασιών από τα αγγλικά μπορείτε να βρείτε στο έγγραφο
"Glossary of part names".
Validity - Καθορίζει το χρονικό πλαίσιο και τον τύπο/την έκδοση των μηχανημάτων στα οποία μπορεί να
χρησιμοποιηθεί το εξάρτημα. Στο υπόμνημα, στο κάτω μέρος της σελίδας, μπορείτε να βρείτε μια αποσαφήνιση
των κωδικών που χρησιμοποιούνται στο υπόδειγμα ισχύος παραγγελίας. Εάν αναφέρεται ένα υπόδειγμα ισχύος
παραγγελίας στον τίτλο του κεφαλαίου, αυτό ισχύει για ολόκληρο το κεφάλαιο. Ένα σύμβολο "συν" στο υπόδειγμα
θα πρέπει να ερμηνεύεται ως "και", ένα κόμμα ως "ή". Οι παρενθέσεις ομαδοποιούν τους κωδικούς ισχύος
παραγγελίας, όπως οι παρενθέσεις στους μαθηματικούς τύπους. Δείτε το ακόλουθο παράδειγμα:
Το ‘PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)’ ισχύει για μηχανήματα με πίεση
λειτουργίας 8 bar, συχνότητα 50 Hz και τάση τροφοδοσίας 500 V ή με πίεση λειτουργίας 8 bar, συχνότητα 60 Hz
και τάση τροφοδοσίας 575 V.
EL – Κωδ. αναφοράς για το σχέδιο ή το εξάρτημα στο εσωτερικό του ηλεκτρικού πίνακα.
R. – Παρατηρήσεις: Πρόσθετες πληροφορίες σχετικά με το εξάρτημα. Επεξήγηση παρέχεται στο κάτω μέρος της
σελίδας.
6 2930 1877 00
Instructions
ES - Español
1 PEDIDO DE PIEZAS
Especifique siempre el número de referencia, el nombre y la cantidad de los elementos que necesita, además del tipo y
número de serie de la máquina.
2 INFORMACIÓN DE LAS COLUMNAS
Ref - Número de referencia: enlaza una pieza concreta de la lista con el solo. Solo se muestran piezas con número
de referencia en el plano. Las piezas del plano que no tienen números de referencia solo se muestran para ilustrar el
conjunto.
Part number - Designación que se debe utilizar para pedir piezas de repuesto.
Si no se especifica una designación, esto quiere decir que el componente no está disponible como pieza de repuesto.
Las piezas que forman parte de un kit tendrán el número de kit en la línea inferior. Para consultar el contenido
completo del kit, consulte el capítulo "1 – Service kits".
Una designación precedida por un punto negro forma parte del conjunto inmediatamente superior.
Remarks: información adicional de la designación inmediatamente superior.
Substituted by: la designación inmediatamente superior se ha sustituido por otra debido a una actualización o
revisión.
Qty - Cantidad: indica el número de piezas en relación con el número de referencia correspondiente. "AR" significa
"Según necesidad": cantidad o número a determinar.
Name - Nombre de la pieza: las traducciones de los nombres en inglés pueden encontrarse en el documento “ Glossary
of part names”
Validity - Define el periodo y tipo/versión de las máquinas en las que se puede utilizar la pieza. Puede encontrar
una explicación de los códigos utilizados en el patrón de validez en la leyenda de la parte inferior de la página. Un
patrón de validez mencionado en el título del capítulo es aplicable a todo el capítulo. Un signo '+' en el patrón debe
interpretarse como una 'y' y una coma debe interpretarse como una 'o'. Los paréntesis agrupan los códigos de validez
de manera similar a su uso en matemáticas; véase el siguiente ejemplo:
'PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)' es válido para máquinas con una presión de
trabajo de 8 bar, una frecuencia de 50 Hz y un voltaje de alimentación de 500 V o de 8 bar, una frecuencia de 60 Hz y
un voltaje de alimentación de 575 V.
EL – Referencia al plano o el componente del interior del armario eléctrico.
R. – Notas: información adicional sobre la pieza; se puede encontrar la explicación en la parte inferior de la página.
ET - Eesti
1 OSADE TELLIMINE
Täpsustage alati osa number, soovitud ühikute nimi ja kogus, aga ka masina tüüp ja seerianumber.
2 TEABE TULP
Ref - Viitenumber: seostab loendis nimetatud konkreetse osa joonisega. Joonisel on näidatud ainult viitenumbriga
osad. Joonisel ilma viitenumbrita esitatud osadel on koostu kuvamisel illustreeriv tähendus.
Part number - Osa number, mida varuosade tellimisel kasutada.
Kui osa numbrit ei ole täpsustatud, ei ole vastav osa varuosana saadaval.
Komplekti kuuluvate osade puhul on alloleval real nimetatud komplekti number. Komplekti tervikliku kirjelduse leiate
peatükist „1- Service kits”.
Kui osa numbri ees on must punkt, sisaldub osa ülaltoodud koostus.
Remarks: osa numbri kohal kuvatav lisateave.
Substituted by: ülaltoodud osa number on uuenduse või kontrolli tulemusena asendatud teise osa numbriga.
Qty - Kogus: osutab asjaomase viitenumbriga seotud osade arvule. „AR” tähendab „vastavalt vajadusele”: kogus või
arv tuleb kindlaks määrata.
Name - Osa nimi: inglisekeelsete nimede tõlked leiate dokumendist „Glossary of part names”.
Validity - Määratleb ajavahemiku ja masina tüübi/versiooni, mille puhul osa kasutatakse. Kasutusmustris kasutatud
koodide selgituse leiate iga lehekülje allosas olevast legendist. Peatüki pealkirjas nimetatud kasutusmuster kohaldub
tervele peatükile. Mustris kasutatud plussmärki tuleb tõlgendada sõnana „ja”, komana või sõnana „või”. Sarnaselt
ümarsulgude matemaatikas kasutamisele rühmitavad ümarsulud kehtivuskoodide rühmad; vt järgmist näidet:
‘PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)’ kehtib masinate puhul, mille töörõhk
on 8 bar ja sagedus 50 Hz ja toitepinge 500 V, või siis masinate puhul, mille töörõhk on 8 bar ja sagedus 60 Hz ja
toitepinge 575V.
EL – Viide joonisele või elektrikapis olevale osale.
R. - Märkused: lisateave osa kohta. Selgituse leiate lehekülje allosast.
2930 1877 00 7
Instructions
FI - Suomalainen
1 OSIEN TILAAMINEN
Määritä aina osanumero, haluttujen tuotteiden nimi ja määrä sekä koneen tyyppi ja sarjanumero.
2 SARAKETIEDOT
Ref - Viitenumero: Yhdistää jonkin tietyn luettelossa mainitun osan piirrokseen. Piirroksessa näkyvät vain ne osat,
joilla on viitenumero. Ne osat, joilla ei ole viitenumeroa, ovat piirroksessa vain kokoonpanoa kuvaamassa.
Part number - Osanumero, jota on käytettävä varaosia tilattaessa.
Jos osanumeroa ei ole määritetty, komponentti ei ole saatavana varaosana.
Sarjan mukana tulevilla osilla on sarjanumero, joka on merkitty alla olevalle viivalle. Lue tiedot sarjan täydellisestä
sisällöstä luvusta 1 – Service kits.
Osanumero, jota edeltää musta piste, sisältyy edellä olevaan kokoonpanoon.
Remarks: lisätietoja edellä olevaan osanumeroon.
Substituted by: edellä oleva osanumero on korvattu toisella osanumerolla päivityksen tai korjauksen takia.
Qty - Määrä: Osoittaa viitenumeroon liittyvien osien määrän. AR (As required) tarkoittaa määritettävää määrää.
Name - Osan nimi: englanninkielisten nimien käännökset on kerrottu asiakirjassa ”Glossary of part names”.
Validity - Määrittää sen ajanjakson ja koneiden tyypin tai version, joita osa koskee. Määrityskaavassa käytetyt
koodit on selitetty sivun alalaidan kuvatekstissä. Luvun otsikossa mainittu määrityskaava koskee koko lukua.
Kaavassa oleva plusmerkki tarkoittaa ja-sanaa ja pilkku tai-sanaa. Sulkeet ryhmittävät määrityskoodit
matemaattisten sulkeiden tavalla, esimerkiksi näin:
PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V) koskee koneita, joiden työskentelypaine on 8
baaria, taajuus 50 hertsiä ja verkkojännite 500 volttia tai joiden työskentelypaine on 8 baaria, taajuus 60 hertsiä ja
verkkojännite 575 volttia.
EL – Viittaus piirrokseen tai sähkökotelon sisällä olevaan komponenttiin.
R. – Huomautukset: Lisätietoja osasta. Selitys on sivun alalaidassa.
FR - Français
1 COMMANDER DES PIÈCES
Toujours spécifier le numéro de pièce, la désignation et la quantité des articles souhaités ainsi que le type et le
numéro de série de la machine.
2 COLONNE INFORMATIONS
Ref - Référence : associe une pièce donnée de la liste au schéma. Seules les pièces avec une référence sont illustrées
sur le schéma. Les pièces représentées sur le schéma sans référence servent uniquement à illustrer l'ensemble.
Part number - Numéros de pièce à utiliser lors de la commande de pièces de rechange.
Si aucun numéro de pièce n'est indiqué, le composant n'est pas disponible en tant que pièce de rechange.
Pour les pièces contenues dans un kit, le numéro de kit est mentionné à la ligne ci-dessous. Pour voir le contenu du kit
en détail, consulter le chapitre « 1 – Service Kits ».
Un numéro de pièce précédé d'un point noir est compris dans l'ensemble ci-dessus.
Remarks : informations supplémentaires sur le numéro de pièce ci-dessus.
Substituted by : le numéro de pièce ci-dessus a été remplacé par un autre numéro de pièce suite à une mise à jour ou
une révision.
Qty - Quantité : indique le nombre de pièces en fonction du numéro de pièce correspondant. « AR » signifie « As
required » (autant que nécessaire) : quantité ou nombre à définir.
Name - Désignation de la pièce : les traductions des désignations anglaises sont disponibles dans le document
« Glossary of part names ».
Validity - Définit le délai et le type/version de machines pour lesquels les pièces sont valides. Pour plus de détails
sur les codes utilisés dans le modèle de validité, voir la légende en bas de page. Un modèle de validité mentionné dans
le titre du chapitre s'applique à l'ensemble du chapitre. Le signe plus utilisé dans le modèle se comprend comme un
« et », une virgule comme un « ou». Les parenthèses regroupent les codes de validité, comme en mathématiques, voir
l'exemple suivant :
« PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V) » est valide pour des machines avec une
pression de service de 8 bar et une fréquence de 50 Hz et une tension d'alimentation de 500 V ou une pression de
service de 8 bar et une fréquence de 60 Hz et une tension d'alimentation de 575 V.
EL – Référence sur le schéma ou le composant à l'intérieur de l'armoire électrique.
R. – Remarque : informations supplémentaires sur la pièce. Pour plus de détails, voir le bas de page.
8 2930 1877 00
Instructions
HU - Magyar
1 ALKATRÉSZRENDELÉS
Mindig adja meg a cikkszámot, a kért elemek nevét és mennyiségét, valamint a típust és a gyári számot.
2 A TÁBLÁZAT OSZLOPAI
Ref - Hivatkozási szám: a felsorolt alkatrészt a megfelelő ábrához társítja. A rajzon csak hivatkozási számmal
ellátott alkatrészek láthatók. Az ábrán a hivatkozási számmal nem rendelkező alkatrészek csak az összeszerelés
módját illusztrálják.
Part number - A pótalkatrészek rendelésénél használandó cikkszám.
Ha nincs megadva cikkszám, az adott alkatrész nem kapható pótalkatrészként.
Azokra az alkatrészekre, amelyek egy készlet részeként kaphatók, a készlet cikkszáma vonatkozik, amely az alsó
sorban szerepel. A készlet teljes tartalmát lásd: „1 – Service Kits” című fejezet.
Ha egy cikkszámot pont előz meg, az illető alkatrész a közvetlenül felette lévő sorban szereplő egység részét képezi.
Remarks: További információk a közvetlenül felette lévő sorban szereplő cikkszámra vonatkozóan.
Substituted by: A közvetlenül felette lévő sorban szereplő cikkszámot frissítés vagy új változat következtében új
cikkszám váltotta fel.
Qty - Mennyiség: az adott hivatkozási számhoz kapcsolódó alkatrészek számát jelöli. Az „AR” jelentése „As
required” (igény szerint): itt megadhatja a mennyiséget vagy a számot.
Name - Az alkatrész neve: az angol nyelvű elnevezések fordítása az „Glossary of part names” c. dokumentumban
található.
Validity - Azt az időkeretet, továbbá azokat a géptípusokat/-verziókat adja meg, amelyekhez az alkatrész
használható. Az érvényességi formulában használt kódok magyarázata a lap alján olvasható. A fejezetcímben szereplő
érvényességi formula az egész fejezetre érvényes. A formulában szereplő plusz (+) jel jelentése: „és”, a vessző (,)
jelentése: „vagy”. A zárójelek a matematikában használt zárójelekhez hasonlóan csoportosítják az érvényességi
kódokat; lásd a következő példát:
A „PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)” 8 bar üzemi nyomású, 50 Hz frekvenciájú
és 500 V tápfeszültségű, vagy 8 bar üzemi nyomású, 60 Hz frekvenciájú és 575 V tápfeszültségű berendezéseket
jelöl.
EL – Hivatkozás az elektromos szekrényen belüli ábrára vagy alkatrészre.
R. – Megjegyzések: Az alkatrésszel kapcsolatos további információk. A magyarázat a lap alján található.
IT - Italiano
1 ORDINE DEI RICAMBI
Specificare sempre il numero categorico, il nome e la quantità degli articoli richiesti, oltre al tipo e al numero di serie
della macchina.
2 COLONNA DELLE INFORMAZIONI
Ref - Numero di riferimento: associa un ricambio specifico dalla lista all'illustrazione. Nell'illustrazione sono mostrati
solo ricambi dotati di numero di riferimento. I ricambi presenti nell'illustrazione privi di numero di riferimento sono
riportati semplicemente per illustrare il montaggio.
Part number - Numero categorico da utilizzare per l'ordine di parti di ricambio.
Quando non è specificato alcun numero categorico, il componente non è disponibile come parte di ricambio.
I ricambi contenuti in un kit avranno il numero di kit riportato nella riga sottostante. Per il contenuto completo del
kit vedere il capitolo "1 – Service kits".
Un numero categorico preceduto da un punto nero fa parte del gruppo immediatamente precedente.
Remarks: le informazioni aggiuntive relative al numero categorico sono riportate in alto.
Substituted by: il numero categorico immediatamente precedente è stato sostituito da un altro numero categorico a
causa di un aggiornamento o di una revisione.
Qty - Quantità: indica il numero di ricambi corrispondenti al numero di riferimento. "AR" significa "As
required" (Secondo necessità): quantità o numero da definire.
Name - Nome parte: la traduzione dei termini dall'inglese è reperibile nel documento "Glossary of part names".
Validity - Definisce i tempi e il tipo/versione di macchine per le quali il ricambio è valido. La legenda in fondo alla
pagina riporta una spiegazione dei codici utilizzati nello schema di validità. Uno schema di validità menzionato nel
titolo del capitolo si applica all'intero capitolo. Un segno più nello schema deve essere interpretato come "e", una
virgola come "o". Tra le parentesi sono raggruppati i codici di validità, al pari delle parentesi matematiche, vedere il
seguente esempio:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" è valido per le macchine con pressione di
esercizio di 8 bar e 50Hz di frequenza e una tensione di alimentazione di 500 V, o con pressione di esercizio di 8 bar,
frequenza di 60Hz e tensione di alimentazione di 575 V.
EL – Riferimento all'illustrazione o al componente all'interno dell'armadio elettrico.
R. – Note: informazioni aggiuntive sulla spiegazione dei ricambi sono reperibili in fondo alla pagina.
2930 1877 00 9
Instructions
JA - 日本の
1 部品の注文
部品番号、注文するアイテムの名称および数量、機器のタイプおよびシリアル番号を必ず指定してください。
サービスマーク“ ”のついたページにはサービスキットの部品が記載されています。 キットの内容物について
は、第1章「サービスキット」を参照してください。
2 各列の説明
Ref. - 参照番号:リストの部品が図のどこにあるかを示します。 参照番号がある部品のみが図に示されていま
す。 参照番号がない部品はアセンブリを表現するため便宜上表記されています。
Part number - 部品番号:部品番号が示されていない部品は、スペア部品としては提供されていません。 太字の行
はアセンブリを示します。 番号の後に黒い点が付いている部品は、すぐ上にある太字のアセンブリを構成してい
ます。
“<<< >>>”は、“Name”と同じタイトルの別のリストを示します。
“Ref.”または”Name”行の下に、特定の部品の部品番号が記載されている場合は、機器のタイプ/バージョンに
応じて部品を選択してください。
Qty - 数量:参照番号に対応する部品の数量を示します。 „AR“は「必要に応じて」を意味し、必要に応じて数
量または番号を指定します。
Name - 部品名:英語に対応する各言語の名称は「Glossary of part names」(部品名称対応表)に記載されてい
ます。
Remarks - 部品に関する追加情報です。
一連の文字列は特定の部品が指定認定団体によって承認されていることを示し、リストのコードまたは規定に準拠
しています。
測定値はミリメートル単位で示されています。
LT - Lietuvos
1 DALIŲ UŽSAKYMAS
Visada nurodykite pageidaujamos prekės dalies numerį, pavadinimą ir kiekį. Taip pat nurodykite įrenginio tipą ir
serijos numerį.
2 INFORMACIJA STULPELIUOSE
Ref - Nuorodos numeris: susieja konkrečią dalį iš sąrašo su brėžiniu. Brėžinyje rodomos tik nuorodos numerį turinčios
dalys. Brėžinyje parodytos dalys be nuorodos numerio yra tiesiog įrenginio iliustracija.
Part number - Dalies numeris, naudojamas užsakant atsargines dalis.
Jei dalies numeris nenurodytas, komponentas negalimas kaip atsarginė dalis.
Rinkinyje esančios dalys turi rinkinio numerį, minimą apatinėje eilutė. Visą rinkinio turinį gali pamatyti skyriuje „1 –
Service kits“.
Jei prieš dalies numerį yra juodas taškas, jis yra viršuje pateiktame įrenginyje.
Remarks: papildoma dalies numerio informacija pateikta dešinėje pusėje viršuje.
Substituted by: dešinėje viršuje nurodytas dalies numeris buvo pakeistas kitu dalies numerio, nes vyko atnaujinimas
arba revizija.
Qty - Kiekis: pateikiamas dalių, kurioms priskiriamas atitinkamas nuorodos numeris, skaičius. „AR“ reiškia
„Priklausomai nuo poreikio“: kiekis arba skaičius bus nustatytas to prireikus.
Name - Dalies pavadinimas: anglų kalba pateiktų pavadinimų vertimus rasite dokumente „Glossary of part names“.
Validity - Apibūdinamas laikotarpis ir įrenginio tipas / versija, kurioms dalis tinka. Tinkamumo šablone naudojami
kodai paaiškinti puslapio apačioje esančioje legendoje. Tinkamumo šablonas skyriaus pavadinimas taikomas visam
skyriui. Pliuso ženklas šablone reiškia „ir“, o kablelis – „arba“. Skliaustais grupuojami tinkamumo kodai (kaip ir
matematiniai veiksmai), žr. pavyzdį:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ tinka įrenginiams, kurių darbinis slėgis yra
8 barai, dažnis yra 50 Hz, o maitinimo įtampa yra 500 V, arba darbinis slėgis yra 8 barai, dažnis yra 60 Hz, o maitinimo
įtampa yra 575 V.
EL – Nuoroda į brėžinį arba komponentą elektros modulio viduje.
R. – Pastabos: papildoma informacija apie dalį. Paaiškinimus galite rasti puslapio apačioje.
10 2930 1877 00
Instructions
LV - Latvijas
1. DETAĻU PASŪTĪŠANA
Vienmēr norādiet detaļas numuru, nosaukumu un vajadzīgo daudzumu, kā arī iekārtas tipu un sērijas numuru.
2. KOLONNAS INFORMĀCIJA
Ref – Atsauces numurs: saista konkrētu sarakstā esošo detaļu ar rasējumu. Rasējumā tiek parādītas tikai detaļas ar
atsauces numuru. Detaļas rasējumā bez atsauces numura paredzētas vienīgi tam, lai attēlotu attiecīgo mezglu.
Part number – Detaļas numurs, kas jāizmanto, pasūtot rezerves daļas.
Ja detaļas numurs nav norādīts, attiecīgais komponents nav pieejams kā rezerves daļa.
Komplektā iekļautām detaļām nākamajā rindā būs norādīts komplekta numurs. Komplekta pilnīgs saturs aprakstīts
nodaļā “1 – Service kits”.
Ja pirms detaļas numura ir melns punkts, tā ir iekļauta iepriekš attēlotajā mezglā.
Remarks: papildinformācija par iepriekšējo detaļas numuru.
Substituted by: iepriekšējais detaļas numurs ir aizstāts ar citu detaļas numuru atjaunināšanas vai pārskatīšanas dēļ.
Qty – Daudzums: apzīmē detaļu skaitu attiecīgajam atsauces numuram. “AR” nozīmē “pēc nepieciešamības”: jānosaka
daudzums vai numurs.
Name – Detaļas nosaukums: angļu valodas nosaukumu tulkojumi ir atrodami dokumentā “Glossary of part names”.
Validity – Nosaka iekārtu derīguma periodu un tipu/versiju. Derīguma norādē iekļauto kodu skaidrojums ir norādīts
eksplikācijā lappuses apakšdaļā. Nodaļas virsrakstā minētā derīguma norāde attiecas uz visu nodaļu. Pluszīme norādē
jāinterpretē kā “un”, bet komats kā “vai”. Iekavas grupē derīguma kodus līdzīgi kā iekavas matemātikā, piemēram:
“PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)” ir derīgs iekārtām ar 8 bāru darba
spiedienu, 50 Hz frekvenci un 500 V barošanas spriegumu vai iekārtām ar 8 bāru darba spiedienu, 60 Hz frekvenci un
575 V barošanas spriegumu.
EL – Atsauce uz rasējumu vai elektrosadales skapja komponentu.
R. – Piezīmes: papildinformācija par detaļu. Skaidrojums atrodams lappuses apakšdaļā.
NL - Nederlands
1 BESTELLEN VAN ONDERDELEN
Vermeld altijd het onderdeelnummer, de benaming en de hoeveelheid van de gewenste onderdelen, alsmede het type en
het serienummer van de machine.
2 KOLOMINFORMATIE
Ref. - Referentienummer: koppelt een specifiek onderdeel in de lijst aan de desbetreffende tekening. Alleen
onderdelen met een referentienummer zijn in de tekening afgebeeld. Onderdelen zonder referentienummer die op de
tekening voorkomen, worden slechts getoond om het geheel te illustreren.
Part number - Onderdeelnummer dat wordt gebruikt voor het bestellen van reserveonderdelen.
Indien geen onderdeelnummer is aangegeven, is de betreffende component niet als reserveonderdeel verkrijgbaar.
Van onderdelen uit een kit wordt het kitnummer op de regel eronder vermeld. Voor de volledige inhoud van de kit, zie
paragraaf "1 - Service kits".
Een onderdeel waarvan het nummer gevolgd wordt door een zwart rondje, maakt deel uit van het vet afgedrukte
samenstel direct erboven.
Remarks: aanvullende informatie voor het onderdeelnummer direct erboven.
Substituted by: het nummer direct erboven is vervangen door een ander onderdeelnummer als gevolg van een update
of herziening.
Qty - Hoeveelheid: geeft het aantal onderdelen aan met betrekking tot met het overeenkomstige referentienummer.
"AR" betekent "As required": de hoeveelheid of het aantal moet nader worden bepaald.
Name - Naam van het onderdeel: vertalingen van de Engelse benamingen zijn te vinden in het document "Glossary of
part names".
Validity - Bepaalt het tijdsframe en type/versie van de machines waarvoor het onderdeel geldig is. Verklaring van de
codes die in het geldigheidspatroon zijn gebruikt, vindt u in de legenda onder aan de pagina. Een geldigheidspatroon
vermeld in de titel van het hoofdstuk is van toepassing op het hele hoofdstuk. Een plusteken in het patroon staat
voor 'en' en een komma voor 'of'. Haakjes groeperen de geldigheidscodes, vergelijkbaar met die in de wiskunde, zie het
volgende voorbeeld:
"PRESS:8 BAR + (FREQ:50HZ+MOVOL:500V, FREQ:60HZ+MOVOL:575V)" is geldig voor machines met een werkdruk
van 8 bar, 50Hz-frequentie en 500V-voedingsspanning of een werkdruk van 8 bar, 60Hz-frequentie en 575V-
voedingsspanning.
EL – Referentie van de tekening of het onderdeel in de elektrische aansluitkast.
R. - Opmerkingen: extra informatie over het onderdeel. Uitleg vindt u onder aan de pagina.
2930 1877 00 11
Instructions
NO - Norsk
1 BESTILLE DELER
Spesifiser alltid delenummeret, navnet og antallet til den nødvendige artikkelen, samt typen og serienummeret til
maskinen.
2 KOLONNEINFORMASJON
Ref – Referansenummer: knytter en spesifikk del fra listen til tegningen. Kun delene med et referansenummer vises i
tegningen. Delene i tegningen som vises uten et referansenummer, er kun tatt med for å illustrere monteringen.
Part number – Delenummer skal brukes ved bestilling av reservedeler.
Når det er ikke er spesifisert et delenummer, er ikke komponenten tilgjengelig som en reservedel.
Deler som inngår i et sett, har settnummeret nevnt på linjen nedenfor. Du finner fullstendig oversikt over innholdet i
settet i kapittel 1 – Service kits.
Et delenummer med en svart prikk foran er en del av settet rett ovenfor.
Remarks: ytterligere informasjon om delenummeret rett ovenfor.
Substituted by: Delenummeret rett ovenfor har blitt erstattet av et annet delenummeret på grunn av en oppdatering
eller revisjon.
Qty – Antall: angir antall deler av det tilhørende referansenummeret. AR betyr Etter behov: Antallet er ikke
bestemt.
Name – Delenavn: Du finner oversettelser av de engelske navnene i dokumentet «Glossary of part names».
Validity – Definerer tidsrommet og maskintypen/-versjonen som delen er gyldig for. Du finner en oversikt over
kodene som brukes i gyldighetsmønsteret, i forklaringen nederst på siden. Et gyldighetsmønster som nevnes i
kapitteltittelen, gjelder for hele kapittelet. Et pluss-tegn i mønsteret skal tolkes som "og", mens et komma skal
tolkes som "eller". Parenteser deler inn gyldighetskodene, omtrent på samme måte som matematiske parenteser. Se
følgende eksempel:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" er gyldig for maskiner med arbeidstrykk
på 8 bar, frekvens på 50 Hz og forsyningsspenning på 500 V; eller arbeidstrykk på 8 bar, frekvens på 60 Hz og
forsyningsspenning på 575V.
EL – Referanse til tegningen eller komponentene inne i koplingsskapet.
R. – Kommentarer: Ekstra informasjon om delen. Du finner en forklaring nederst på siden.
PL - Polski
1 ZAMAWIANIE CZĘŚCI
Podczas zamawiania produktów należy zawsze podawać następujące informacje: numer części, nazwę i liczbę
produktów, a także typ i numer seryjny urządzenia.
2 OBJAŚNIENIE NAZW KOLUMN
Ref. — numer referencyjny: informuje, na którym rysunku można znaleźć konkretną część z listy. Na rysunku
zamieszczone są wyłącznie części opatrzone numerem referencyjnym. Części bez przypisanego numeru
referencyjnego zostały zamieszczone na rysunku wyłącznie w celu prawidłowego zilustrowania montażu.
Part number — numer części stosowany podczas zamawiania części zamiennych.
W przypadku braku numeru części danej pozycji nie można zamówić jako części zamiennej.
Jeśli dana część jest elementem zestawu, w kolejnym wierszu znajduje się numer zestawu. Informacje na temat pełnej
zawartości zestawu można znaleźć w rozdziale „1 – Service kits”.
Jeśli numer części poprzedza czarna kropka, dana część jest elementem zestawu opisanego powyżej.
Remarks: dodatkowe informacje na temat numeru części zamieszczonego powyżej.
Substituted by: numer części zamieszczony powyżej został zastąpiony innym numerem części na skutek modernizacji
lub aktualizacji.
Qty — ilość: oznacza liczbę części w odniesieniu do danego numeru referencyjnego. Symbol „AR” oznacza „zależnie od
wymagań”: liczba lub numer do ustalenia.
Name — nazwa części: tłumaczenia nazw angielskich znajdują się w dokumencie „Glossary of part names”.
Validity — wskazuje ramy czasowe oraz typ/wersję urządzenia, do którego przeznaczona jest część. Kody
wykorzystywane we wzorze przydatności zostały objaśnione w legendzie u dołu strony. Wzór przydatności
wspomniany w tytule rozdziału dotyczy całego rozdziału. Znak dodawania we wzorze należy interpretować jako
słowo „i”, natomiast przecinek — jako słowo „lub”. Nawiasy pełnią tu funkcję podobną do nawiasów w matematyce —
grupują kody przydatności — jak w poniższym przykładzie:
kod „PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)” dotyczy maszyn o ciśnieniu roboczym
8 bar, częstotliwości 50 Hz i napięciu zasilania 500 V lub o ciśnieniu roboczym 8 bar, częstotliwości 60 HZ i napięciu
zasilania 575 V.
EL — odnośnik do rysunku lub podzespołu wewnątrz szafki rozdzielczej.
R. — uwagi: dodatkowe informacje na temat części. Wyjaśnienie znajduje się u dołu strony.
12 2930 1877 00
Instructions
PT - Português
1 ENCOMENDA DE PEÇAS
Especifique sempre a referência da peça, o nome e a quantidade de itens pretendidos, bem como o tipo e o número de
série da máquina.
2 INFORMAÇÕES DAS COLUNAS
Ref - Número de referência: associa uma peça específica da lista ao desenho. Neste último, são apresentadas apenas
as peças com um número de referência. As peças apresentadas no desenho sem um número de referência destinam-se
simplesmente a ilustrar o processo de montagem.
Part number - Referência da peça a utilizar no caso de encomenda de peças sobresselentes.
Se não for especificada uma referência da peça, significa que o componente não se encontra disponível como uma peça
sobresselente.
As peças incluídas num kit terão o número do kit mencionado na linha abaixo. Para obter informações sobre o conteúdo
completo do kit, consulte o capítulo "1 – Service kits".
Uma referência da peça precedida de um ponto preto está incluída no processo de montagem imediatamente acima
mencionado.
Remarks: encontra informações adicionais sobre a referência da peça imediatamente acima.
Substituted by: a referência da peça imediatamente acima foi substituída por outra referência devido a uma
actualização ou revisão.
Qty - Quantidade: indica o número de peças em relação ao número de referência correspondente. "AR" (As required)
significa "Como exigido": quantidade ou número a determinar.
Name - Nome da peça: encontra as traduções dos nomes em inglês no documento "Glossary of part names".
Validity - Define o período de tempo e o tipo/versão de máquinas para que a peça é válida. Encontra a explicação sobre
os códigos utilizados no padrão de validade na legenda situada no final da página. Um padrão de validade mencionado
no título do capítulo aplica-se a todo o capítulo. Um sinal de adição no padrão deve ser interpretado como "e", ao
passo que uma vírgula deve ser interpretada como "ou". Os parênteses agrupam os códigos de validade, da mesma
forma que os parênteses utilizados em operações matemáticas; veja o seguinte exemplo:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" é válido para máquinas com uma pressão de
trabalho de 8 bar, uma frequência de 50 Hz e uma tensão de alimentação de 500 V ou uma pressão de trabalho de 8
bar, uma frequência de 60 Hz e uma tensão de alimentação de 575 V.
EL – Referência ao desenho ou ao componente dentro do compartimento eléctrico.
R. – Observações: informações adicionais sobre a peça. Encontra a explicação no final da página.
RO - român
1 COMANDAREA PIESELOR
Indicaţi întotdeauna numărul de catalog, numele şi cantitatea articolelor solicitate, precum şi tipul şi numărul de serie
al maşinii.
2 INFORMAŢIILE DIN COLOANE
Ref. - Numărul de referinţă: face legătura între o piesă din listă şi una din schemă. Numai piesele care au un număr
de referinţă apar în schemă. Piesele din schemă care nu au un număr de referinţă sunt incluse doar pentru a clarifica
modul de asamblare.
Part number - Numărul de catalog este utilizat pentru comandarea pieselor de schimb.
Atunci când nu este specificat un număr de catalog, componenta nu este disponibilă ca piesă de schimb.
Pentru piesele incluse în kituri, numărul kitului este menţionat pe rândul următor. Pentru conţinutul complet al
kitului, consultaţi capitolul „1 – Service kits”.
Un număr de catalog precedat de un punct negru este inclus în ansamblul aflat chiar deasupra acestuia.
Remarks: Informaţii suplimentare privind numărul de catalog de mai sus.
Substituted by: Numărul de catalog de mai sus a fost înlocuit de un alt număr de catalog din cauza unei actualizări sau
a unei revizuiri.
Qty - Cantitate: indică numărul de piese care au numărul de referinţă corespunzător. „AR” este abrevierea pentru „As
required”: cantitatea şi numărul vor fi determinate conform necesităţilor.
Name - Numele piesei: traducerile numelor din engleză se află în documentul „Glossary of part names”.
Validity - Defineşte perioada de valabilitate şi tipul/versiunea utilajelor cu care piesa este compatibilă. Clarificarea
codurilor utilizate în modelul de valabilitate poate fi găsită în legenda din partea de jos a paginii. Un model de
valabilitate menţionat în titlul unui capitol se aplică întregului capitol. Un semn plus care apare într-un model va fi
interpretat drept „şi”, virgulă ori „sau”. Codurile de valabilitate sunt grupate cu ajutorul unor paranteze având o
funcţie similară parantezelor matematice, a se vedea exemplul de mai jos:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)” indică valabilitatea pentru utilajele cu
presiune de lucru de 8 bari, frecvenţă de 50 Hz şi tensiune de alimentare de 500 V sau presiune de lucru de 8 bari,
frecvenţă de 60 Hz şi tensiune de alimentare de 575 V.
EL – Referire la schemă sau la componenta din cofretul electric.
R. – Observaţii: informaţii suplimentare privind piesa. Explicaţiile pot fi găsite în partea de jos a paginii.
2930 1877 00 13
Instructions
RU - русский
1 ЗАКАЗ ДЕТАЛЕЙ
Всегда указывайте номер по каталогу, наименование и количество требуемых позиций, а также тип и серийный
номер машины.
2 ИНФОРМАЦИЯ
Ref - Ссылочный номер: соотносит деталь из списка со схемой. На схеме показаны только детали со ссылочным
номером. Детали без ссылочного номера приведены на схемах только для демонстрации всего узла в сборе.
Part number - Номер детали, указываемый при заказе запасных частей.
Если номер детали не указан, то компонент недоступен в качестве отдельной запасной части.
Для деталей, входящих в состав комплекта, будут приведены номера этих комплектов, упомянутых строчкой
ниже. Чтобы узнать полный состав комплекта см. раздел “1 – Service kits”.
Деталь, перед номером которой стоит черная точка, входит в состав изображенного выше узла.
Remarks: дополнительная информация о номере приведенной выше детали.
Substituted by: номер изображенной выше детали был заменен другим номером по причине обновления или
переработки.
Qty - Количество: указывает количество деталей относительно соответствующего ссылочного номера. „AR“
значит „As required“: количество или номер будут определены.
Name - Наименование детали: перевод англоязычных наименований можно найти в документе “Glossary of part
names”(Словарь наименований деталей).
Validity - Определяет временные рамки и тип/версию машины, в которой используется деталь. Пояснение
кодов, используемых в данной графе, можно найти в списке обозначений внизу страницы. Информация
о совместимости, упомянутая в данной главе, актуальна для всей главы. Знак плюса в примечании о
совместимости следует принимать за ‘и’, запятые — за ‘или’. Скобки группируют коды совместимости по
принципу, схожему с математическим. См. пример:
‘PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)’ применима в машинах с рабочим
давлением 8 бар, частотой 50 Гц и напряжением источника питания 500 В или рабочим давлением 8 бар,
частотой 60 Гц и напряжением источника питания 575 В.
EL – Ссылка на схему или компонент электрического шкафа.
R. – Примечания: дополнительная информация о детали. Пояснения приведены внизу страницы.
SK - slovenský
1 OBJEDNÁVANIE DIELOV
Vždy uveďte číslo dielu, názov a množstvo požadovaných položiek, ako aj typ a výrobné číslo zariadenia.
2 INFORMÁCIE V STĹPCOCH
Ref – Referenčné číslo: spája konkrétny diel v zozname s nákresom. Na nákrese sú zobrazené len diely s referenčným
číslom. Diely v nákrese bez referenčného čísla slúžia len na znázornenie zostavy.
Part number – Číslo dielu, ktoré treba použiť pri objednávaní náhradných dielov.
Ak nie je uvedené žiadne číslo dielu, daný komponent nie je k dispozícii ako náhradný diel.
Diely, ktoré sú súčasťou súpravy, majú v riadku nižšie uvedené číslo súpravy. Zoznam všetkých dielov v súprave
nájdete v kapitole „1 – Service kits“.
Číslo dielu, pred ktorým sa nachádza čierna bodka, je súčasťou zostavy uvedenej nad ním.
Remarks: Ďalšie informácie o čísle dielu vyššie.
Substituded by: Číslo dielu uvedené vyššie bolo nahradené iným dielom kvôli inovácii alebo revízii.
Qty – Množstvo: Indikuje počet dielov v súvislosti s príslušným referenčným číslom. „AR“ znamená „As required“:
množstvo alebo počet sa musí určiť.
Name – Názov dielu: Preklady anglických názvov nájdete v dokumente „Glossary of part names“(Slovník názvov
dielov).
Validity – Definuje časový rámec a typ/verziu zariadení, pre ktoré možno daný diel použiť. Informácie o význame
kódov použitých v reťazci označujúcom platnosť nájdete v legende v spodnej časti strany. Reťazec označujúci
platnosť uvedený v názve kapitoly sa vzťahuje na celú kapitolu. Znamienko plus v tomto reťazci znamená „a“ a čiarka
znamená „alebo“. Zátvorky slúžia na zoskupenie kódov označujúcich platnosť podobne ako v matematických vzorcoch.
Pozrite si nasledujúci príklad:
„PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)“ – platí pre zariadenia s pracovným
tlakom 8 barov, frekvenciou 50 Hz a napájacím napätím 500 V alebo pracovným tlakom 8 barov, frekvenciou 60 Hz
a napájacím napätím 575 V.
EL – Odkaz na nákres komponentu v elektrickej skrini.
R. – Poznámky: Ďalšie informácie o danom diele. Vysvetlenie nájdete v spodnej časti stránky.
14 2930 1877 00
Instructions
SL - slovenščina
1 NAROČANJE DELOV
Vedno navedite številko dela, ime in količino zahtevanih predmetov ter tip in serijsko številko stroja.
2 INFORMACIJE O STOLPCU
Ref - Referenčna številka: povezuje določen navedeni del z risbo. Na risbi so prikazani samo deli z referenčno številko.
Deli na risbi, ki nimajo referenčne številke, so namenjeni samo prikazu sklopa.
Part number - Številko dela uporabite pri naročanju nadomestnih delov.
- Če številka dela ni navedena, komponenta ni na voljo kot nadomestni del.
Za dele, ki so del kompleta, bo v spodnji vrstici navedena tudi številka kompleta. Celotno vsebino kompleta si oglejte v
poglavju "1 – Service kits".
Številka dela, pred katero je črna pika, spada v sklop tik zgoraj.
Remarks: dodatne informacije o številki dela tik zgoraj.
Substituted by: številka dela tik zgoraj je zamenjana z drugo številko dela, zaradi posodobitve ali revizije.
Qty Količina: določa število delov v povezavi z ustrezno referenčno številko. Kratica "AR" pomeni "As required" (kot je
zahtevano): količina ali število za določitev.
Name - Ime dela: prevodi angleških imen se nahajajo v dokumentu "Glossary of part names".
Validity - Določa časovni razpon in tip/različico stroja, ki veljata za del. Razlago kod, ki se uporabljajo v vzorcu
veljavnosti, najdete v legendi na dnu strani. Vzorec veljavnosti, ki je naveden v naslovu poglavja, velja za celotno
poglavje. Znak plus v vzorcu lahko pomeni besedo "in", vejico ali besedo "ali". Oklepaji združujejo kode veljavnosti,
podobno kot oklepaji pri matematiki; glejte spodnji primer:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" velja za stroje z delovnim tlakom 8 barov
in frekvenco 50 Hz ter napajalno napetostjo 500 V, ali z delovnim tlakom 8 barov, frekvenco 60 Hz in napajalno
napetostjo 575 V.
EL – Referenca za risbo ali komponenta znotraj električne omarice.
R. – Opombe: dodatne informacije o delu. Razlago lahko najdete na dnu strani.
SV - Svenska
1 BESTÄLLA DELAR
Ange alltid reservdelsnummer, namn och antal delar som önskas, samt typbeteckning och tillverkningsnummer på
maskinen.
2 SPALTINFORMATION
Ref. – Referensnummer: kopplar ihop en viss reservdel i förteckningen med ritningen. Endast reservdelar med
referensnummer visas i ritningen. Reservdelar som saknar referensnummer i ritningen finns med för att illustrera
själva monteringen.
Part number – Reservdelsnummer som används vid beställning av reservdelar.
Om reservdelsnummer saknas finns komponenten inte som reservdel.
Delar som tillhör en sats har satsnumret angivet på raden nedanför. Se kapitel ”1 – Service kits” för satsens
kompletta innehåll.
Ett reservdelsnummer som föregås av en svart punkt finns med i enheten direkt ovanför.
Remarks: Ytterligare information om reservdelsnumret direkt ovanför.
Substituted by: Reservdelsnumret direkt ovanför har ersatts med ett annat reservdelsnummer på grund av en
uppdatering eller revision.
Qty – Antal: Anger hur många delar som är kopplade till motsvarande referensnummer. "AR" betyder "As required" (som
erfordras): Antal eller nummer bestäms senare.
Name - Reservdelsbeteckningar: Översättningar av de engelska beteckningarna återfinns i dokumentet "Glossary of
part names" (Ordlista med reservdelsbeteckningar).
Validity – Definierar tidsramen och typ/version av maskin som reservdelen passar för. En förklaring av koderna som
används i giltighetsmönstret finns i symbolförklaringen längst ner på sidan. Ett giltighetsmönster som nämns i ett
kapitel gäller för hela kapitlet. Ett plustecken i mönstret ska tolkas som "och" och ett komma som "eller". Parenteser
grupperar giltighetskoderna i likhet med parenteser inom matematiken. Se följande exempel:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" gäller maskiner med 8 bar arbetstryck,
50 Hz frekvens och 500 V matningsspänning, eller 8 bar arbetstryck, 60 Hz frekvens och 575 V matningsspänning.
EL – Referens till ritningen eller komponenten inuti elskåpet.
R. – Anmärkningar: Extra information om reservdelen. En förklaring finns längst ner på sidan.
2930 1877 00 15
Instructions
TR - Türk
1 PARÇA SİPARİŞİ
Her zaman gereken parçaların parça numarası, adı ve miktarının yanı sıra makinenin tipini ve seri numarasını da
belirtin.
2 SÜTUN BİLGİLERİ
Ref - Referans numarası: Listenin belirli bir bölümünü çizime bağlar. Yalnızca referans numarası olan parçalar çizimde
gösterilir. Çizimde referans numarası olmayan parçalar yalnızca mekanizmanın tamamını göstermek için konulmuştur.
Part number - Yedek parça siparişi verirken kullanılacak parça numarası.
Parça numarası belirtilmediğinde, bu bileşen bir yedek parça olarak bulunmaz.
Bir kite dahil olan parçalar, alttaki satırda bulunan kit numarasına sahiptir. Kitin tüm içeriğini görmek için bkz. bölüm
"1 – Service kits".
Önünde siyah nokta olan parça numaraları, hemen yukarıdaki mekanizmada bulunur.
Remarks: Hemen yukarıdaki parça numarası ile ilgili ek bilgiler.
Substituted by: Bir güncelleme veya revizyon nedeniyle hemen yukarıdaki parça numarası yerine başka bir parça
numarası gelmiştir.
Qty - Miktar: İlgili referans numarasıyla ilgili parça sayısını gösterir. "AR" kısaltması "As required" (miktarı veya sayısı
belirlenecek) anlamına gelir.
Name - Parça adı: İngilizce adların tercümeleri "Glossary of part names”(Parça adları sözlüğü) adlı belgede bulunabilir.
Validity - Parçanın geçerli olduğu zaman aralığını ve makine tiplerini/modellerini belirler. Geçerlilik düzeninde
kullanılan kodların açıklamaları sayfanın alt kısmında bulunabilir. Bölüm başlığında bahsedilen bir geçerlilik düzeni,
tüm bölüm için geçerlidir. Düzende bir artı işareti olması "ve", virgül işareti olması "veya" olarak anlaşılabilir. Geçerlilik
kodları, matematikte kullanılan parantezlere benzer şekilde, parantezler ile gruplara ayrılır. Aşağıdaki örneğe
bakabilirsiniz:
"PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)" düzeni 8 bar çalışma basıncı olan, 50 Hz
frekanslı, 500 V besleme gerilimli makineler veya 8 bar çalışma basıncı, 60 Hz frekanslı ve 575 V besleme gerilimli
makineler için geçerlidir.
EL – Elektrik panosu içindeki çizim veya parçaya referans anlamına gelir.
R. – Notlar: Parça hakkında ek bilgiler. Açıklamalar sayfanın alt kısmında bulunabilir.
ZH - 中国的
1 ##零件
#必###明所需物件的零件号、名称和数量,以及机器的#型和 序列号。
2 #信息
Ref - 参考#号:将列表中的具体零件与##相##。##中##示具有参考#号的零件。##中不#参考#号的零件只用于#明#成##。
Part number - ###件#需要使用零件号。
如果不###明零件号#,将无法以#件形式提供部件。
套件中包含的零件将具有下行所提的套件#号。有#套件的完整信息,#参#第 1 章 – Service kits 保#套件。
上方的#成中包含了零件号,零件号前加有#点符号。
Remarks (#注):上方零件号的##信息。
Substituted by (取代):上方的零件号因更新或版本原因更##其他零件号。
Qty - 数量:表示与##参考#号相#的零件数量。"AR" 表示“根据需要”:数量或数目待#定。
Name - 零件名称:“Glossary of names”(零件名称##)文#中提供了英文名称的##翻#。
Validity - 定##零件#用的##期限以及机器的#型/版本。本#底部的#例#有#性表#式中使用的代##行了#明。章###中提及的
有#性表#式#用于全部章#。表#式中的加号表示“和”,逗号表示“或”。#括号用于#合有#代#,#似于数学括号,参#以下示例:
‘PRESS:8BAR + (FREQ:50HZ+MOVOL:500V , FREQ:60HZ+MOVOL:575V)’ #用于以下机器:工作#力 8 bar,#率 50 Hz,
#源## 500 V;或工作#力 8 bar,#率 60 Hz,#源## 575 V。
EL –参考##或##内部#件。
R.– #注:有#零件的#充信息。本#底部提供相##明。
16 2930 1877 00
Instructions
2930 1877 00 17
1 - Service Kits
18 2930 1877 00
1 - Service Kits
2930 1877 00 19
1 - Service Kits
20 2930 1877 00
1 - Service Kits
2930 1877 00 21
2 - Oil
22 2930 1877 00
2 - Oil
2930 1877 00 23
3 - Compressor Element
PRCMP:APF
24 2930 1877 00
3 - Compressor Element
PRCMP:APF
2930 1877 00 25
4 - Gearbox
PRCMP:APF
26 2930 1877 00
4 - Gearbox
PRCMP:APF
Legend:
PRCMP:APF - Product company:APF
2930 1877 00 27
5 - Motor coupling
PRCMP:APF
28 2930 1877 00
5 - Motor coupling
PRCMP:APF
Legend:
PRCMP:APF - Product company:APF
2930 1877 00 29
6 - Motor Support
PRCMP:APF
30 2930 1877 00
6 - Motor Support
PRCMP:APF
Legend:
PRCMP:APF - Product company:APF
2930 1877 00 31
7 - Air Inlet
PRCMP:APF
32 2930 1877 00
7 - Air Inlet
PRCMP:APF
2010
1621 7377 00 1 HOUSING
Substituted by: 1635 0408 80 - FILTER AIR (quantity: 1)
2020
1635 0408 00 1 FILTER AIR
3010 1635 2815 00 1 PIPE (10/12/2014 - ...)
2930 1877 00 33
7 - Air Inlet
PRCMP:APF
34 2930 1877 00
7 - Air Inlet
PRCMP:APF
Legend:
PRCMP:APF - Product company:APF
2930 1877 00 35
8 - Valves on element
PRCMP:APF
36 2930 1877 00
8 - Valves on element
PRCMP:APF
Legend:
PRCMP:APF - Product company:APF
2930 1877 00 37
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
38 2930 1877 00
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
2020
0300 0274 17 8 WASHER (17/12/2014 - ...)
2030
0266 2111 00 4 NUT HEXAGON (10/12/2014 - ...)
2040
0147 1406 03 4 HEX. HEAD SCREW M12 X 55 (10/12/2014 - ...)
2045
0301 2358 00 4 PLAIN WASHER(A) 13 X 24 X 2.5 (10/12/2014 - ...)
2050
1623 0839 00 4 SPACER (10/12/2014 - ...)
2060
0348 0101 12 4 CABLE TIE (10/12/2014 - ...)
2070
0686 3716 02 2 PLUG 1/2 A A (10/12/2014 - ...)
2071
2 WASHER (10/12/2014 - ...)
Service kits: 2906 0955 00 - KIT OIL SEPARATOR
2906 0956 00 - KIT OIL SEPARATOR
2906 0954 00 - KIT OIL SEPARATOR
3001 5005 66 - KIT MPV
2110
1623 0345 00 1 SHAFT (10/12/2014 - ...)
2130
1621 4326 00 1 RING (10/12/2014 - ...)
2140
1 RING SEAL (10/12/2014 - ...)
Service kits: 3001 5005 66 - KIT MPV
2150
1623 0344 00 1 NUT (10/12/2014 - ...)
2160
1623 8081 00 1 HOUSING VALVE (10/12/2014 - ...)
2180
1 O-RING (10/12/2014 - ...)
Service kits: 3001 5005 66 - KIT MPV
2190
1623 0517 00 1 PIPE SUCTION (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR) , PRESS:13.8BAR , PRESS:14BAR
2190
1623 0518 00 1 PIPE SUCTION (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:8.5BAR , PRESS:8.6BAR) , (PRESS:10.4BAR , PRESS:10BAR)
+ MODEL:GA160VSDA2
2190
1623 0519 00 1 PIPE SUCTION (10/12/2014 - ...) (PRESS:8.5BAR , PRESS:8.6BAR) +
MODEL:GA160VSDA2
2195
1 SEAL WASHER (10/12/2014 - ...)
Legend:
HAT:N - High ambient temperature version:reduced ambient IDRY:FF - Integrated dryer:Full feature IDRY:PACK - Integrated dryer:Pack
condition (Increased FAD) - max 46° / 115°F MAPPR:ASME - Pressure Vessel Approval:ASME (U Stamp) MAPPR:CE - Pressure Vessel Approval:CE
MAPPR:AS1210 - Pressure Vessel Approval:AS1210 MAPPR:ML - Pressure Vessel Approval:ML MAPPR:MOL - Pressure Vessel Approval:Japan
MAPPR:CRN - Pressure Vessel Approval:CRN MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MAPPR:MOM - Pressure Vessel Approval:MOM PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
MODEL:GA160VSDA2 - Model:GA 160 VSD PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:10BAR - Working pressure:10 bar PRESS:8.6BAR - Working pressure:8.6 bar
PRESS:8.5BAR - Working pressure:8.5 bar
2930 1877 00 39
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
40 2930 1877 00
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
2211
2 SEAL WASHER (10/12/2014 - ...)
Service kits: 3001 5311 12 - KIT FILTER OIL
2220
0211 1102 16 2 SCREW (10/12/2014 - ...)
2230
2 O-RING (10/12/2014 - ...)
Service kits: 3001 5005 66 - KIT MPV
2240
0301 2358 00 8 PLAIN WASHER(A) 13 X 24 X 2.5 (10/12/2014 - ...)
2250
0147 1403 03 8 HEX. HEAD SCREW M12 X 40 (10/12/2014 - ...)
2260
1 OIL SEPARATOR ELEMENT (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:8.5BAR , PRESS:8.6BAR) , (PRESS:10.4BAR , PRESS:10BAR)
+ MODEL:GA160VSDA2
Service kits: 2906 0955 00 - KIT OIL SEPARATOR
2260
1 OIL SEPARATOR ELEMENT (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR) , PRESS:13.8BAR , PRESS:14BAR
Service kits: 2906 0954 00 - KIT OIL SEPARATOR
2260
1 OIL SEPARATOR ELEMENT (10/12/2014 - ...) (PRESS:8.5BAR , PRESS:8.6BAR) +
MODEL:GA160VSDA2
Service kits: 2906 0956 00 - KIT OIL SEPARATOR
2270
1614 9184 00 1 INDICATOR LEVEL (10/12/2014 - ...)
2280
0560 0200 74 1 ELBOW (10/12/2014 - ...)
2300
1079 5840 29 1 HEXAGON NIPPLE (10/12/2014 - ...)
2310
0575 0056 35 1 FLEXIBLE (10/12/2014 - ...)
2330
1614 9252 00 1 PLUG (10/12/2014 - ...)
2340
1623 6821 00 1 BUSHING (10/12/2014 - ...)
2350
1623 6822 00 1 SCREW (10/12/2014 - ...)
2360
0266 2116 00 1 HEXAGON NUT M20 (10/12/2014 - ...)
2380
0147 1400 03 4 BOLT (10/12/2014 - ...)
2390
0301 2358 00 4 PLAIN WASHER(A) 13 X 24 X 2.5 (10/12/2014 - ...)
2400
0147 1564 12 1 BOLT (10/12/2014 - ...)
2410
0300 0274 13 1 PLAIN WASHER(A) 21 X 37 X 3 (10/12/2014 - ...)
2420
1623 6844 00 1 WASHER (10/12/2014 - ...)
2430
0515 8000 12 1 CAGE (10/12/2014 - ...)
2440
0147 1249 03 6 BOLT (10/12/2014 - ...)
Substituted by: 0147 1247 03 - BOLT (quantity: 1)
2450
0301 2321 00 6 PLAIN WASHER(A) 6.4 X 12 X 1.6 (10/12/2014 - ...)
2460
1623 8535 00 1 RING SEAL (10/12/2014 - ...)
2470
0663 2117 17 1 O-RING (10/12/2014 - ...)
2480
0803 5012 11 1 SILENCER 1/8 (10/12/2014 - ...)
2490
0686 3716 10 1 PLUG 1 1/2 A A (10/12/2014 - ...)
2495
0661 1000 32 1 SEAL WASHER (10/12/2014 - ...)
2500
2250 2528 00 1 PLUG SCREW (10/12/2014 - ...)
2505
1 SEAL WASHER (10/12/2014 - ...)
Service kits: 2906 0955 00 - KIT OIL SEPARATOR
2906 0956 00 - KIT OIL SEPARATOR
2906 0954 00 - KIT OIL SEPARATOR
2510 1614 9146 00 1 PLUG (10/12/2014 - ...)
Legend:
HAT:N - High ambient temperature version:reduced ambient IDRY:FF - Integrated dryer:Full feature IDRY:PACK - Integrated dryer:Pack
condition (Increased FAD) - max 46° / 115°F MAPPR:ASME - Pressure Vessel Approval:ASME (U Stamp) MAPPR:CE - Pressure Vessel Approval:CE
MAPPR:AS1210 - Pressure Vessel Approval:AS1210 MAPPR:ML - Pressure Vessel Approval:ML MAPPR:MOL - Pressure Vessel Approval:Japan
MAPPR:CRN - Pressure Vessel Approval:CRN MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MAPPR:MOM - Pressure Vessel Approval:MOM PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
MODEL:GA160VSDA2 - Model:GA 160 VSD PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:10BAR - Working pressure:10 bar PRESS:8.6BAR - Working pressure:8.6 bar
PRESS:8.5BAR - Working pressure:8.5 bar
2930 1877 00 41
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
42 2930 1877 00
9 - Air Receiver
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR , PRESS:8.5BAR , PRESS:8.6BAR) + HAT:N + PRCMP:APF
3010 1635 1765 02 1 VESSEL AIR (10/12/2014 - ...) MAPPR:ASME , MAPPR:CRN , MAPPR:MOM
3010 1635 1765 05 1 VESSEL AIR (10/12/2014 - ...) MAPPR:AS1210 , MAPPR:ML , MAPPR:MOL
3050
0147 1964 85 12 BOLT (10/12/2014 - ...)
4030 0661 1000 30 1 SEAL WASHER 33.89 X 42.8 X 3.4 (10/12/2014 - ...) IDRY:PACK + MODEL:GA160VSDA2 ,
MODEL:GA110VSDA2 , MODEL:GA132VSDA2
4030 0661 1000 31 1 SEAL WASHER (10/12/2014 - ...) IDRY:FF + MODEL:GA160VSDA2
5010 1623 0456 06 1 SPRING COMPRESSION (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR , PRESS:8.5BAR ,
PRESS:8.6BAR)
5020 1623 4457 03 1 VALVE PRESS (10/12/2014 - ...)
2930 1877 00 43
10 - Air outlet - Air Cooled Pack
COOL:AIR + IDRY:PACK + PRCMP:APF
44 2930 1877 00
10 - Air outlet - Air Cooled Pack
COOL:AIR + IDRY:PACK + PRCMP:APF
2010
1623 7868 00 1 PIPE
2020
1623 7869 00 1 PIPE
2030
1623 0507 00 1 SEPARATOR WATER
2040
0147 1246 03 2 BOLT
2050
1623 2588 00 1 PLATE
2060
0211 1244 01 6 SCREW
2070
1623 0446 00 1 PLATE PERFORATE
2080
1623 1778 00 1 BOWL
2090
0147 1404 03 4 HEX. HEAD SCREW M12 X 45
2100
0663 2108 07 1 O-RING
Substituted by: 0663 2104 35 - O-RING (quantity: 1)
Legend:
COOL:AIR - Cooling:Air cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
2930 1877 00 45
11 - Air outlet - Air Cooled Full feature
COOL:AIR + IDRY:FF + PRCMP:APF
46 2930 1877 00
11 - Air outlet - Air Cooled Full feature
COOL:AIR + IDRY:FF + PRCMP:APF
2010
1623 7868 00 1 PIPE
2020
1623 7869 00 1 PIPE
2030
1623 0507 00 1 SEPARATOR WATER
2040
0147 1246 03 2 BOLT
2050
1623 2588 00 1 PLATE
2060
0211 1244 01 6 SCREW
2070
1623 0446 00 1 PLATE PERFORATE
2080
1623 1778 00 1 BOWL
2090
0147 1404 03 4 HEX. HEAD SCREW M12 X 45
2100
0663 2108 07 1 O-RING
Substituted by: 0663 2104 35 - O-RING (quantity: 1)
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
2930 1877 00 47
12 - Air outlet - Water Cooled Pack
COOL:WATER + IDRY:PACK + PRCMP:APF
48 2930 1877 00
12 - Air outlet - Water Cooled Pack
COOL:WATER + IDRY:PACK + PRCMP:APF
2010
1623 7868 00 1 PIPE
2020
1623 7869 00 1 PIPE
2030
1623 0507 00 1 SEPARATOR WATER
2040
0147 1246 03 2 BOLT
2050
1623 2588 00 1 PLATE
2060
0211 1244 01 6 SCREW
2070
1623 0446 00 1 PLATE PERFORATE
2080
1623 1778 00 1 BOWL
2090
0147 1404 03 4 HEX. HEAD SCREW M12 X 45
2100
0663 2108 07 1 O-RING
Substituted by: 0663 2104 35 - O-RING (quantity: 1)
Legend:
COOL:WATER - Cooling:Water cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
2930 1877 00 49
13 - Air outlet - Water Cooled Full feature
COOL:WATER + IDRY:FF + PRCMP:APF
50 2930 1877 00
13 - Air outlet - Water Cooled Full feature
COOL:WATER + IDRY:FF + PRCMP:APF
2010
1623 7868 00 1 PIPE
2020
1623 7869 00 1 PIPE
2030
1623 0507 00 1 SEPARATOR WATER
2040
0147 1246 03 2 BOLT
2050
1623 2588 00 1 PLATE
2060
0211 1244 01 6 SCREW
2070
1623 0446 00 1 PLATE PERFORATE
2080
1623 1778 00 1 BOWL
2090
0147 1404 03 4 HEX. HEAD SCREW M12 X 45
2100
0663 2108 07 1 O-RING
Substituted by: 0663 2104 35 - O-RING (quantity: 1)
Legend:
COOL:WATER - Cooling:Water cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
2930 1877 00 51
14.1 - Element and vessel connections Aircooled with energy recovery
COOL:AIR + ENREC:Y + PRCMP:APF
52 2930 1877 00
14.1 - Element and vessel connections Aircooled with energy recovery
COOL:AIR + ENREC:Y + PRCMP:APF
Legend:
COOL:AIR - Cooling:Air cooled ENREC:Y - Energy recovery:Yes PRCMP:APF - Product company:APF
2930 1877 00 53
14.2 - Element and vessel connections Aircooled without energy recovery
COOL:AIR + ENREC:N + PRCMP:APF
54 2930 1877 00
14.2 - Element and vessel connections Aircooled without energy recovery
COOL:AIR + ENREC:N + PRCMP:APF
Legend:
COOL:AIR - Cooling:Air cooled ENREC:N - Energy recovery:N PRCMP:APF - Product company:APF
2930 1877 00 55
14.3 - Element and vessel connections GA110VSD Watercooled with / without energy
recovery
COOL:WATER + MODEL:GA110VSDA2 + PRCMP:APF
56 2930 1877 00
14.3 - Element and vessel connections GA110VSD Watercooled with / without energy
recovery
COOL:WATER + MODEL:GA110VSDA2 + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled ENREC:N - Energy recovery:N ENREC:Y - Energy recovery:Yes
MODEL:GA110VSDA2 - Model:GA 110 VSD PRCMP:APF - Product company:APF
2930 1877 00 57
14.4 - Element and vessel connections GA132VSD,GA160VSD, Watercooled with
energy recovery
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + ENREC:Y + PRCMP:APF
58 2930 1877 00
14.4 - Element and vessel connections GA132VSD,GA160VSD, Watercooled with
energy recovery
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + ENREC:Y + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled ENREC:Y - Energy recovery:Yes MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 59
14.5 - Element and vessel connections GA132VSD,GA160VSD, Watercooled without
energy recovery
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + ENREC:N + PRCMP:APF
60 2930 1877 00
14.5 - Element and vessel connections GA132VSD,GA160VSD, Watercooled without
energy recovery
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + ENREC:N + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled ENREC:N - Energy recovery:N MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 61
14.6 - Filter and connections Aircooled
COOL:AIR + PRCMP:APF
62 2930 1877 00
14.6 - Filter and connections Aircooled
COOL:AIR + PRCMP:APF
Legend:
COOL:AIR - Cooling:Air cooled PRCMP:APF - Product company:APF
2930 1877 00 63
14.7 - Filter and connections Watercooled
COOL:WATER + PRCMP:APF
64 2930 1877 00
14.7 - Filter and connections Watercooled
COOL:WATER + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 65
14.8 - Thermostat - 8.5/8.6 Bar
(PRESS:8.5BAR , PRESS:8.6BAR) + PRCMP:APF
66 2930 1877 00
14.8 - Thermostat - 8.5/8.6 Bar
(PRESS:8.5BAR , PRESS:8.6BAR) + PRCMP:APF
Legend:
PRCMP:APF - Product company:APF PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
2930 1877 00 67
14.9 - Thermostat - 10/10.4/13.8/14 Bar
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR) + PRCMP:APF
68 2930 1877 00
14.9 - Thermostat - 10/10.4/13.8/14 Bar
(PRESS:10.4BAR , PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR) + PRCMP:APF
Legend:
PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar
PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
2930 1877 00 69
14.10 - Energy recovery
ENREC:Y + PRCMP:APF
70 2930 1877 00
14.10 - Energy recovery
ENREC:Y + PRCMP:APF
Legend:
ENREC:Y - Energy recovery:Yes MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 71
14.10 - Energy recovery
ENREC:Y + PRCMP:APF
72 2930 1877 00
14.10 - Energy recovery
ENREC:Y + PRCMP:APF
Legend:
ENREC:Y - Energy recovery:Yes MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 73
14.11 - Energy Recovery - Thermostat
ENREC:Y + PRCMP:APF
74 2930 1877 00
14.11 - Energy Recovery - Thermostat
ENREC:Y + PRCMP:APF
Legend:
ENREC:Y - Energy recovery:Yes PRCMP:APF - Product company:APF
2930 1877 00 75
15.1 - Cooler Assembly Aircooled Pack GA110VSD
COOL:AIR + IDRY:PACK + MODEL:GA110VSDA2 + PRCMP:APF
76 2930 1877 00
15.1 - Cooler Assembly Aircooled Pack GA110VSD
COOL:AIR + IDRY:PACK + MODEL:GA110VSDA2 + PRCMP:APF
Remarks:
1) Foam: 0395 6001 69 (AR) 50 x 2040 x 1650 (self-adhesive)
Legend:
COOL:AIR - Cooling:Air cooled IDRY:PACK - Integrated dryer:Pack MODEL:GA110VSDA2 - Model:GA 110 VSD
PRCMP:APF - Product company:APF
2930 1877 00 77
15.2 - Cooler Assembly Aircooled Full Feature GA110VSD
COOL:AIR + IDRY:FF + MODEL:GA110VSDA2 + PRCMP:APF
78 2930 1877 00
15.2 - Cooler Assembly Aircooled Full Feature GA110VSD
COOL:AIR + IDRY:FF + MODEL:GA110VSDA2 + PRCMP:APF
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
PRCMP:APF - Product company:APF
2930 1877 00 79
15.3 - Cooler Assembly Aircooled GA132VSD,GA160VSD
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:AIR + PRCMP:APF
80 2930 1877 00
15.3 - Cooler Assembly Aircooled GA132VSD,GA160VSD
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:AIR + PRCMP:APF
2060 0147 1360 03 6 HEX. HEAD SCREW M10 X 20 (10/12/2014 - ...) IDRY:FF
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
2930 1877 00 81
15.4 - Cooler Assembly Watercooled GA110VSD
COOL:WATER + MODEL:GA110VSDA2 + PRCMP:APF
82 2930 1877 00
15.4 - Cooler Assembly Watercooled GA110VSD
COOL:WATER + MODEL:GA110VSDA2 + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled MODEL:GA110VSDA2 - Model:GA 110 VSD PRCMP:APF - Product company:APF
2930 1877 00 83
15.5 - Cooler Assembly Watercooled GA132VSD,GA160VSD
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + PRCMP:APF
84 2930 1877 00
15.5 - Cooler Assembly Watercooled GA132VSD,GA160VSD
(MODEL:GA132VSDA2 , MODEL:GA160VSDA2) + COOL:WATER + PRCMP:APF
2930 1877 00 85
15.6 - Fan Assembly Aircooled
(((MOVOL:380V-3PH , MOVOL:440V-3PH) + EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) + FREQ:60HZ , EAPPR:IEC + FREQ:50HZ +
MOVOL:400V-3PH) + COOL:AIR + PRCMP:APF
86 2930 1877 00
15.6 - Fan Assembly Aircooled
(((MOVOL:380V-3PH , MOVOL:440V-3PH) + EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) + FREQ:60HZ , EAPPR:IEC + FREQ:50HZ +
MOVOL:400V-3PH) + COOL:AIR + PRCMP:APF
1070 1635 2314 00 1 FAN AXIAL (10/12/2014 - ...) EAPPR:IEC + FREQ:50HZ + MOVOL:400V-3PH
1150 1503 0786 00 2 ROTATION ARROW (10/12/2014 - ...) ((EAPPR:CSA-UL + MOVOL:460V-3PH , EAPPR:IEC
+ MOVOL:440V-3PH) + FREQ:60HZ , EAPPR:IEC + FREQ:50HZ +
MOVOL:400V-3PH)
Legend:
COOL:AIR - Cooling:Air cooled EAPPR:CSA-UL - Electrical approval:CSA-UL EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz MOVOL:380V-3PH - Supply voltage:380V (3ph)
MOVOL:400V-3PH - Supply voltage:400V MOVOL:440V-3PH - Supply voltage:440V (3ph) MOVOL:460V-3PH - Supply voltage:460V (3ph)
PRCMP:APF - Product company:APF
2930 1877 00 87
15.7 - Fan Assembly Watercooled
(((MOVOL:380V-3PH , MOVOL:440V-3PH) + EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) + FREQ:60HZ , EAPPR:IEC + FREQ:50HZ +
MOVOL:400V-3PH) + COOL:WATER + PRCMP:APF
88 2930 1877 00
15.7 - Fan Assembly Watercooled
(((MOVOL:380V-3PH , MOVOL:440V-3PH) + EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) + FREQ:60HZ , EAPPR:IEC + FREQ:50HZ +
MOVOL:400V-3PH) + COOL:WATER + PRCMP:APF
1030 1614 9608 03 1 FAN ASSEMBLY (10/12/2014 - ...) EAPPR:IEC + FREQ:60HZ + MOVOL:380V-3PH
1030 1614 9608 04 1 FAN ASSEMBLY (10/12/2014 - ...) (EAPPR:CSA-UL + MOVOL:460V-3PH , EAPPR:IEC +
MOVOL:440V-3PH) + FREQ:60HZ
1040 0291 1128 16 3 NUT LOCK (10/12/2014 - ...)
Legend:
COOL:WATER - Cooling:Water cooled EAPPR:CSA-UL - Electrical approval:CSA-UL EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz MOVOL:380V-3PH - Supply voltage:380V (3ph)
MOVOL:400V-3PH - Supply voltage:400V MOVOL:440V-3PH - Supply voltage:440V (3ph) MOVOL:460V-3PH - Supply voltage:460V (3ph)
PRCMP:APF - Product company:APF
2930 1877 00 89
16 - Water System
PRCMP:APF
90 2930 1877 00
16 - Water System
PRCMP:APF
1020 0634 1000 27 2 VICTAULIC COUPLING (10/12/2014 - ...) (COOL:WATER , ENREC:Y) + IDRY:FF
Legend:
COOL:WATER - Cooling:Water cooled ENREC:Y - Energy recovery:Yes IDRY:FF - Integrated dryer:Full feature
IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
2930 1877 00 91
17 - Drain Assembly - Pack
IDRY:PACK + PRCMP:APF
92 2930 1877 00
17 - Drain Assembly - Pack
IDRY:PACK + PRCMP:APF
1230 0661 1000 25 1 SEAL WASHER 13.74 X 20.57 X 2 (10/12/2014 - ...) EAPPR:IEC
1250 0661 1000 25 1 SEAL WASHER 13.74 X 20.57 X 2 (10/12/2014 - ...) EAPPR:IEC
2930 1877 00 93
18 - Drain Assembly - Full Feature
IDRY:FF + PRCMP:APF
94 2930 1877 00
18 - Drain Assembly - Full Feature
IDRY:FF + PRCMP:APF
2930 1877 00 95
19 - Control System Aircooled
COOL:AIR + PRCMP:APF
96 2930 1877 00
19 - Control System Aircooled
COOL:AIR + PRCMP:APF
2010 1900 5200 33 1 ELEKTRONIKON MK5 I/O2 (10/12/2014 - ...) (ENREC:Y + IDRY:PACK , IDRY:FF)
Legend:
COOL:AIR - Cooling:Air cooled ENREC:Y - Energy recovery:Yes IDRY:FF - Integrated dryer:Full feature
IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
2930 1877 00 97
20 - Control System Watercooled
COOL:WATER + PRCMP:APF
98 2930 1877 00
20 - Control System Watercooled
COOL:WATER + PRCMP:APF
Legend:
COOL:WATER - Cooling:Water cooled PRCMP:APF - Product company:APF
2930 1877 00 99
21.1 - Cubicle Box - CSA-UL
EAPPR:CSA-UL + PRCMP:APF
Legend:
EAPPR:CSA-UL - Electrical approval:CSA-UL PRCMP:APF - Product company:APF
Legend:
EAPPR:IEC - Electrical approval:IEC PRCMP:APF - Product company:APF
Legend:
COOL:AIR - Cooling:Air cooled COOL:WATER - Cooling:Water cooled ENREC:N - Energy recovery:N
IDRY:FF - Integrated dryer:Full feature IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
SMARTLNK:N - Smartlink:N SPM:N - SPM monitoring equipment:N
Legend:
PRCMP:APF - Product company:APF SPM:Y - SPM monitoring equipment:SPM monitoring equipment
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:AIR - Cooling:Air cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:AIR - Cooling:Air cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:WATER - Cooling:Water cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:WATER - Cooling:Water cooled IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
1623 0737 00 AR SEAL
1390 1635 2617 00 1 DOOR (10/12/2014 - ...)
1635 2387 00 2 LOCK
1 INSULATION SILENCING 2)
1623 0737 00 AR SEAL
1400 1635 2931 00 14 HINGE (10/12/2014 - ...)
Remarks:
1) Foam : 0395600167(AR) 30 x 2040 x 1650 2) Foam : 0395600169(AR) 50 x 2040 x 1650
Legend:
COOL:WATER - Cooling:Water cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
Legend:
COOL:AIR - Cooling:Air cooled PRCMP:APF - Product company:APF
Legend:
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
PRCMP:APF - Product company:APF
2020 0147 1403 03 8 HEX. HEAD SCREW M12 X 40 (10/12/2014 - ...) APADS:Y
Legend:
APADS:Y - Anchor pads:Yes IDRY:PACK - Integrated dryer:Pack PRCMP:APF - Product company:APF
2020 0147 1403 03 8 HEX. HEAD SCREW M12 X 40 (10/12/2014 - ...) APADS:Y
Legend:
APADS:Y - Anchor pads:Yes IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
2010 1617 4222 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:13.8BAR , PRESS:14BAR) + MAPPR:CE
2010 1617 4562 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) (MAPPR:AS1210 , MAPPR:ASME , MAPPR:CRN ,
MAPPR:MOL , MAPPR:MOM) + (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA110VSDA2
2010 1617 4561 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) (MAPPR:AS1210 , MAPPR:ASME , MAPPR:CRN ,
MAPPR:MOL , MAPPR:MOM) + (MODEL:GA110VSDA2 ,
MODEL:GA132VSDA2) + (PRESS:13.8BAR , PRESS:14BAR)
2010 1617 4563 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) ((MODEL:GA132VSDA2 , MODEL:GA160VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR , PRESS:8.5BAR , PRESS:8.6BAR) ,
(PRESS:13.8BAR , PRESS:14BAR) + MODEL:GA160VSDA2 ,
(PRESS:8.5BAR , PRESS:8.6BAR) + MODEL:GA110VSDA2) +
(MAPPR:AS1210 , MAPPR:ASME , MAPPR:CRN , MAPPR:MOL ,
MAPPR:MOM)
2010 1617 4221 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) ((MODEL:GA132VSDA2 , MODEL:GA160VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR , PRESS:8.5BAR , PRESS:8.6BAR) ,
(PRESS:13.8BAR , PRESS:14BAR) + MODEL:GA160VSDA2 ,
(PRESS:8.5BAR , PRESS:8.6BAR) + MODEL:GA110VSDA2) +
MAPPR:CE
2010 1617 4217 00 1 HEAT EXCHANGER REFRIGERANT/AIR (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) + MAPPR:CE +
MODEL:GA110VSDA2
2020 1617 4676 00 1 INSULATION THERMAL (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:13.8BAR , PRESS:14BAR)
2020 1617 4666 00 1 INSULATION THERMAL (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA110VSDA2
2020 1617 4521 00 1 INSULATION THERMAL (10/12/2014 - ...) (MODEL:GA132VSDA2 , MODEL:GA160VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR , PRESS:8.5BAR , PRESS:8.6BAR) ,
(PRESS:13.8BAR , PRESS:14BAR) + MODEL:GA160VSDA2 ,
(PRESS:8.5BAR , PRESS:8.6BAR) + MODEL:GA110VSDA2
2030 1617 4667 00 1 INSULATION THERMAL (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA110VSDA2
2030 1617 4522 00 1 INSULATION THERMAL (10/12/2014 - ...) (MODEL:GA132VSDA2 , MODEL:GA160VSDA2) +
(PRESS:10.4BAR , PRESS:10BAR , PRESS:8.5BAR , PRESS:8.6BAR) ,
(PRESS:13.8BAR , PRESS:14BAR) + MODEL:GA160VSDA2 ,
(PRESS:8.5BAR , PRESS:8.6BAR) + MODEL:GA110VSDA2
2030 1617 4677 00 1 INSULATION THERMAL (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:13.8BAR , PRESS:14BAR)
Legend:
IDRY:FF - Integrated dryer:Full feature MAPPR:AS1210 - Pressure Vessel Approval:AS1210 MAPPR:ASME - Pressure Vessel Approval:ASME (U Stamp)
MAPPR:CE - Pressure Vessel Approval:CE MAPPR:CRN - Pressure Vessel Approval:CRN MAPPR:MOL - Pressure Vessel Approval:Japan
MAPPR:MOM - Pressure Vessel Approval:MOM MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
1617 4685 00
1 VALVE CHECK
1617 4682 00
1 VALVE CORE
1627 7468 00 1 VALVE
2010 1627 6672 80 1 PIPE (10/12/2014 - ...) ((PRESS:10BAR , PRESS:8.5BAR) +
MODEL:GA160VSDA2 , MODEL:GA132VSDA2 + PRESS:8.5BAR) +
(MOVOL:380V-3PH , MOVOL:400V-3PH) + EAPPR:IEC + FREQ:50HZ
2020
1627 6639 00 1 PIPE (10/12/2014 - ...)
2030
1627 6640 80 1 PIPE (10/12/2014 - ...)
2040
1627 6687 80 1 PIPE (10/12/2014 - ...) ((MODEL:GA132VSDA2 , MODEL:GA160VSDA2)
+ PRESS:8.6BAR , MODEL:GA160VSDA2 + PRESS:10.4BAR) +
((MOVOL:380V-3PH , MOVOL:440V-3PH) + EAPPR:IEC , EAPPR:CSA-
UL + MOVOL:460V-3PH) + FREQ:60HZ , ((PRESS:10BAR ,
PRESS:8.5BAR) + MODEL:GA160VSDA2 , MODEL:GA132VSDA2
+ PRESS:8.5BAR) + (MOVOL:380V-3PH , MOVOL:400V-3PH) +
EAPPR:IEC + FREQ:50HZ
2040
1627 6690 80 1 PIPE (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:13.8BAR , PRESS:14BAR)
2040
1627 6689 80 1 PIPE (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA110VSDA2
2040
1627 6688 80 1 PIPE (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA132VSDA2 , (PRESS:13.8BAR , PRESS:14BAR) +
MODEL:GA160VSDA2 , (PRESS:8.5BAR , PRESS:8.6BAR) +
MODEL:GA110VSDA2
2050
1627 6641 80 1 PIPE (10/12/2014 - ...)
2060
1627 6417 80 1 PIPE (10/12/2014 - ...) ((MOVOL:380V-3PH , MOVOL:440V-3PH)
+ EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) +
((PRESS:10.4BAR , PRESS:8.6BAR) + MODEL:GA160VSDA2 ,
MODEL:GA132VSDA2 + PRESS:8.6BAR) + FREQ:60HZ ,
((PRESS:10BAR , PRESS:8.5BAR) + MODEL:GA160VSDA2 ,
MODEL:GA132VSDA2 + PRESS:8.5BAR) + (MOVOL:380V-3PH ,
MOVOL:400V-3PH) + EAPPR:IEC + FREQ:50HZ , (PRESS:10.4BAR ,
PRESS:10BAR) + MODEL:GA132VSDA2 , (PRESS:13.8BAR ,
PRESS:14BAR) + MODEL:GA160VSDA2 , (PRESS:8.5BAR ,
PRESS:8.6BAR) + MODEL:GA110VSDA2
1617 4244 00
1 FILTER/DRYER
1619 5567 07
1 SIGHT GLASS M/F
1627 7888 03 1 VALVE REGUL.
1617 1124 00 1 SLEEVE
1617 0476 00 1 NUT
2060 1627 6414 80 1 PIPE (10/12/2014 - ...) (MODEL:GA110VSDA2 , MODEL:GA132VSDA2) +
(PRESS:13.8BAR , PRESS:14BAR)
1617 4244 00
1 FILTER/DRYER
1619 5567 07
1 SIGHT GLASS M/F
1627 7888 02 1 VALVE REGUL.
1617 0476 00 1 NUT
1617 0488 00 1 SLEEVE
2060
1627 6415 80 1 PIPE (10/12/2014 - ...) (PRESS:10.4BAR , PRESS:10BAR) +
MODEL:GA110VSDA2
1617 4244 00 1 FILTER/DRYER
1619 5567 07 1 SIGHT GLASS M/F
1627 7888 02 1 VALVE REGUL.
1617 0476 00 1 NUT
1617 0488 00 1 SLEEVE
Legend:
COOL:AIR - Cooling:Air cooled EAPPR:CSA-UL - Electrical approval:CSA-UL EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz IDRY:FF - Integrated dryer:Full feature
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:400V-3PH - Supply voltage:400V MOVOL:440V-3PH - Supply voltage:440V (3ph)
MOVOL:460V-3PH - Supply voltage:460V (3ph) PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
2070
1617 4299 80 1 PIPE (10/12/2014 - ...) ((MOVOL:380V-3PH , MOVOL:440V-3PH)
+ EAPPR:IEC , EAPPR:CSA-UL + MOVOL:460V-3PH) +
((PRESS:10.4BAR , PRESS:8.6BAR) + MODEL:GA160VSDA2 ,
MODEL:GA132VSDA2 + PRESS:8.6BAR) + FREQ:60HZ ,
(MODEL:GA110VSDA2 , MODEL:GA132VSDA2) + (PRESS:10.4BAR ,
PRESS:10BAR , PRESS:13.8BAR , PRESS:14BAR) ,
(PRESS:13.8BAR , PRESS:14BAR) + MODEL:GA160VSDA2 ,
(PRESS:8.5BAR , PRESS:8.6BAR) + MODEL:GA110VSDA2
1617 0476 00 0 NUT
1617 0488 00 0 SLEEVE
2070
1627 6671 80 1 PIPE (10/12/2014 - ...) ((PRESS:10BAR , PRESS:8.5BAR) +
MODEL:GA160VSDA2 , MODEL:GA132VSDA2 + PRESS:8.5BAR) +
(MOVOL:380V-3PH , MOVOL:400V-3PH) + EAPPR:IEC + FREQ:50HZ
2080 1627 7619 00 1 PIPE (10/12/2014 - ...)
Legend:
COOL:AIR - Cooling:Air cooled EAPPR:CSA-UL - Electrical approval:CSA-UL EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz IDRY:FF - Integrated dryer:Full feature
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:400V-3PH - Supply voltage:400V MOVOL:440V-3PH - Supply voltage:440V (3ph)
MOVOL:460V-3PH - Supply voltage:460V (3ph) PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
1617 0386 00
1 SLEEVE (10/12/2014 - ...)
1617 0476 00 1 NUT (10/12/2014 - ...)
1617 0488 00 1 SLEEVE (10/12/2014 - ...)
1617 1524 02 1 VALVE (10/12/2014 - ...)
1617 1524 03 1 VALVE (10/12/2014 - ...)
1617 4284 00 1 NON RETURN VALVE (10/12/2014 - ...)
1617 4685 00 1 VALVE CHECK (10/12/2014 - ...)
1627 7468 00 1 VALVE (10/12/2014 - ...)
Legend:
COOL:WATER - Cooling:Water cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
COOL:WATER - Cooling:Water cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
COOL:AIR - Cooling:Air cooled COOL:WATER - Cooling:Water cooled EAPPR:CSA-UL - Electrical approval:CSA-UL
EAPPR:IEC - Electrical approval:IEC FREQ:60HZ - Frequency:60 Hz IDRY:FF - Integrated dryer:Full feature
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:440V-3PH - Supply voltage:440V (3ph) MOVOL:460V-3PH - Supply voltage:460V (3ph)
PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar
PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar
PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
COOL:AIR - Cooling:Air cooled EAPPR:IEC - Electrical approval:IEC FREQ:50HZ - Frequency:50 Hz
IDRY:FF - Integrated dryer:Full feature MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:400V-3PH - Supply voltage:400V PRCMP:APF - Product company:APF
PRESS:10BAR - Working pressure:10 bar PRESS:8.5BAR - Working pressure:8.5 bar
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
MODEL:GA132VSDA2 - Model:GA 132 VSD PRCMP:APF - Product company:APF PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD
MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF
PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
COOL:AIR - Cooling:Air cooled IDRY:FF - Integrated dryer:Full feature MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
PRESS:10BAR - Working pressure:10 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
1900 0147 1377 03 4 HEX. HEAD SCREW M10 X 100 (10/12/2014 - ...)
Legend:
IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
Legend:
COOL:AIR - Cooling:Air cooled EAPPR:CSA-UL - Electrical approval:CSA-UL EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz IDRY:FF - Integrated dryer:Full feature
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:400V-3PH - Supply voltage:400V MOVOL:440V-3PH - Supply voltage:440V (3ph)
MOVOL:460V-3PH - Supply voltage:460V (3ph) PRCMP:APF - Product company:APF PRESS:10.4BAR - Working pressure:10.4 bar
PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar PRESS:14BAR - Working pressure:14 bar
PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
2020 1627 7579 80 1 COIL MOUNTING KIT (10/12/2014 - ...) (EAPPR:IEC + FREQ:50HZ , FREQ:60HZ)
Legend:
COOL:AIR - Cooling:Air cooled COOL:WATER - Cooling:Water cooled EAPPR:IEC - Electrical approval:IEC
FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz IDRY:FF - Integrated dryer:Full feature
MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD MODEL:GA160VSDA2 - Model:GA 160 VSD
MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:440V-3PH - Supply voltage:440V (3ph) PRCMP:APF - Product company:APF
PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
COOL:AIR - Cooling:Air cooled COOL:WATER - Cooling:Water cooled EAPPR:CSA-UL - Electrical approval:CSA-UL
EAPPR:IEC - Electrical approval:IEC FREQ:50HZ - Frequency:50 Hz FREQ:60HZ - Frequency:60 Hz
IDRY:FF - Integrated dryer:Full feature MODEL:GA110VSDA2 - Model:GA 110 VSD MODEL:GA132VSDA2 - Model:GA 132 VSD
MODEL:GA160VSDA2 - Model:GA 160 VSD MOVOL:380V-3PH - Supply voltage:380V (3ph) MOVOL:400V-3PH - Supply voltage:400V
MOVOL:440V-3PH - Supply voltage:440V (3ph) MOVOL:460V-3PH - Supply voltage:460V (3ph) PRCMP:APF - Product company:APF
PRESS:10.4BAR - Working pressure:10.4 bar PRESS:10BAR - Working pressure:10 bar PRESS:13.8BAR - Working pressure:13.8 bar
PRESS:14BAR - Working pressure:14 bar PRESS:8.5BAR - Working pressure:8.5 bar PRESS:8.6BAR - Working pressure:8.6 bar
Legend:
IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
Legend:
COOL:WATER - Cooling:Water cooled IDRY:FF - Integrated dryer:Full feature PRCMP:APF - Product company:APF
01/07/2015
No. 2930 1877 00
www.atlascopco.com