Thermal

Therm-1
Thermal Properties
Temperature
What is temperature? It is a measure of the amount of "atomic jiggling". When something is hot
(has a high temperature), its atoms are jiggling a lot. When it is cold (has a low temperature), its
gas at hi T gas at lo T gas at T = 0K

atoms are jiggling little.
As temperature falls, atoms jiggle less and less. At "absolute zero" T = 0 K, all atoms stop, no
motion.
Temperature T = measure of energy per atom
Various temperature scales:

9 o
TF = TC + 32 F = Fahrenheit
5 o
C = Celsius
TK = TC + 273.15 K = Kelvin
1 oC = 1 K , 1 oF = (5/9) Co
room temperature = 72oF = 22oC = 295 K ≈ 300 K
absolute zero = 0 K = –273oC = – 459oF
[In the ideal gas law, p V = N k T = n R T (N = #molecules, n = #moles), must always use T in
Kelvin.]
Thermal energy U = total energy of all atoms (random motion)
Heat Q = amount of thermal energy transferred to a body.
[Q] = energy, SI unit of heat = joule
popular unit of energy = 1 calorie (cal) = 4.184 J Notice calorie spelled with a small "c".
Therm-2
1 cal = energy to raise T of 1 gram of water by 1oC
1 kcal = 1000 cal = 1 Cal = 4184 J = "food Calorie" Notice Calorie spelled with a big "C"
[ Some primitive cultures use the BTU ("British Thermal Unit) = energy to raise a pound of
water by 1oF. 1 BTU = 1060 J ]
Definition: heat capacity of an object = heat added per temperature rise (J/K)
Definition: specific heat (or specific heat capacity) of a material = c = amount of heat added
per unit mass per degree Celsius rise in temperature. If we have a mass m of some material, and
we add an amount of heat ∆Q and that produces a temperature rise of ∆T, then specific heat is
defined as..
∆Q
c = [c] = J/(kg ⋅ oC) (SI units)
m ∆T
Usually write the equation as ∆Q = m c ∆T
This equation says that if I have a mass m of some material with specific heat c, and I want to
raise its temperature by ∆T, then I have to add an amount of heat ∆Q = m c ∆T.
cal kcal J
c water = 1 = 1 = 4186
g⋅ C
o
kg ⋅ C
o
kg ⋅ o C
Example: Heat your mug of coffee (which is mostly water) from room temperature to near
boiling: m = 200 g, T = 20oC → 90oC.
⎛ cal ⎞ ⎛ 4186 J ⎞⎟
∆Q = m c ∆T = (200g) ⎜⎜1 o ⎟⎟⎟ (70o C) = 14000 cal = 14.0 kcal×⎜⎜ ⎟ = 58600 J
⎜⎝ g ⋅ C ⎠⎟ ⎝⎜ kcal ⎠⎟
Different materials have different specific heats:

material c (cal/g⋅C)
water 1.00
ice 0.53
aluminum 0.22
dry air 0.24
iron 0.11
(notice that liquid water has a high specific heat compared to other materials)
Therm-3
Example: Suppose we have 2 objects, labeled A and B (water and steel, say), with object A
hotter than object B. They initially have temperatures TA and TB .
(hot) (cold)
TA > TB
A B
mA , TA , cA mB , TB , cB
Bring A and B together, allowing them to exchange heat with each other, but not with the outside
world ⇒ A will cool, B will heat and both will reach same final temperature Tf .
Object A will lose heat: ∆QA < 0

Object B will gain heat: ∆QB > 0
∆Q A = −∆Q B
m A c A ∆TA = − m B c B ∆TB
m A c A (Tf − TA ) = − m B cB (Tf − TB )
Tf (m A c A + m Bc B ) = m A c A TA + m B cB TB
…solve for Tf (does not matter if T is in Celsius or Kelvin, but must be consistent).
Phase changes.
phase = solid, liquid, or gas (S, L, or G)
S ↔ L (freezing/melting) or L ↔ G (boiling/condensing) or
S ↔ G (sublimation)
Solid water (ice) can have any temperature in the range -273oC < T ≤ 0oC
Liquid water can have any temperature in the range 0oC ≤ T < 100oC
Can have a mixture of ice and water both at T = 0oC
If heat is added to the mixture at T = 0oC , some ice melts, but T stays at 0oC
until all the ice has melted.
Latent heat or heat of transformation = heat required to cause phase change
Latent heat of solid/liquid trans. LSL = heat needed to melt 1 g of ice at 0oC.
ice + water
LSL (water) = 79.7 cal/g
Requires 80 cal to melt a single gram of ice, but only 1 cal to raise temp of the liquid by 1oC.
Therm-4
Example: How much heat required to change 100 g of ice at T = –10oC into liquid water at T =
+10oC?
1. Heat ice to T = 0oC ∆Q1 = m cice ∆T
o
2. Melt ice at T = 0 C ∆Q2 = m Lf
3. Heat water to Tfinal ∆Q3 = m cwater ∆T
∆Qtotal = 100(0.5)(10) + 100(80) + 100(1)(10)
= 500 cal + 8000 cal + 1000 cal = 9500 cal

(heat ice) (melt ice) (heat water)
Note that most of the energy went into melting the ice because of the large latent heat of
water/ice transformation. This is good for people in Boulder. If Lf was not large, we would have
big floods every spring, because all the snow would suddenly melt as soon as the temperature
rose above melting.
LLG = heat of vaporization = heat needed to transform 1 g of liquid water into vapor at 100oC.
LLG (water) = 539 cal This is a very large amount of heat ⇒ very expensive to distill water.
Example: Tiger, tiger, burning bright... In the 1956 science fiction movie, Forbidden Planet,
Captain Adams (played by Leslie Nielsen) vaporizes a tiger with one shot from his "blaster
pistol". This tiger is only about 6 meters away from the captain. About how much energy is
required to vaporize a tiger? Is it a good idea to release this much energy this close to you?
A tiger is mostly water and has a mass of about m = 250 kg (three time the mass of a man). In
order to make the tiger boil away, you have to first raise the temperature of the tiger (water) from
T = 30oC (healthy tiger temp.) to 100oC (boiling). Then you have to evaporate the water at T =
100oC. For each gram of tiger, the first step requires 70 cal ( = m c ∆T ), and the second step
requires 539 cal ( = m LLG ), so let's say, roughly, at least 600 cal is needed per gram.
1000 g 600 cal 4 J

Q = 250 kg × × × = 6×108 J (just a rough calculation so 1 cal ≈ 4 J.)
kg g cal
How much energy is this 6×108 J? This energy is about 200 kW⋅hr. [One kilowatt⋅hour is
1000W (ten 100W light bulbs on) for 1 hour.] The power company charges about $20 for this
much energy (at 10 cents per kW⋅hr). This energy is also the energy content of about 5 gallons of
gasoline or about 300 sticks of dynamite. Releasing this much energy all at once would kill
everyone nearby and make a huge, choking cloud of tiger smoke.
Heat Transfer
There are three (and only three) ways to transfer heat.
1) Conduction : heat transfer by direct touch

2) Convection : heat transfer by bulk movement of hot matter
3) Radiation : heat transfer by light (electromagnetic radiation)

Thermal

Uploaded by

Copyright:

Available Formats

Thermal

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Thermal

Uploaded by

Copyright:

Available Formats

Therm-1

gas at hi T gas at lo T gas at T = 0K

Temperature T = measure of energy per atom

Various temperature scales:

room temperature = 72oF = 22oC = 295 K ≈ 300 K

absolute zero = 0 K = –273oC = – 459oF

Thermal energy U = total energy of all atoms (random motion)

Heat Q = amount of thermal energy transferred to a body.

[Q] = energy, SI unit of heat = joule

1 cal = energy to raise T of 1 gram of water by 1oC

Usually write the equation as ∆Q = m c ∆T

Different materials have different specific heats:

Object A will lose heat: ∆QA < 0

Can have a mixture of ice and water both at T = 0oC

Latent heat or heat of transformation = heat required to cause phase change

∆Qtotal = 100(0.5)(10) + 100(80) + 100(1)(10)

= 500 cal + 8000 cal + 1000 cal = 9500 cal

1000 g 600 cal 4 J

There are three (and only three) ways to transfer heat.

1) Conduction : heat transfer by direct touch

You might also like