DAY 1

Part I. Speaker’s Details

Company: National irrigation Administration

Address: Pantabangan, Nueva Ecija
Speaker’s Name: Engr. Micaela S. Violago
Position of the Speaker: Human Resources (HR)
Topic: History of Pantabangan Dam
Date: February 7,2023

Part II. Seminar Details

On February 7, 2023, Students of Universidad De Dagupan

visited the Pantabangan Dam. Pantabangan Dam is an earth-fill
embankment dam on the Pampanga River located in Pantabangan
in Nueva Ecija. The purpose of this dam is to provides water for
irrigation and hydroelectric power generation while its reservoir,
Pantabangan Lake, affords flood control in the city of Nueva Ecija
and other nearest city. It is useful to all farmers and fisherman
because Pantabangan Dam provides water for the farmers
agricultural needs and it provides water marine life for fisherman.

Based on the Seminar about the Pantabangan Dam they

discuss the history and importance of Pantabangan Dam to the
environment and to the people of Nueva Ecija and other near
provinces. The speaker Engr. Micaela Violago discuss all things
about this Pantabangan Dam and answer all questions that we ask
to her and the Engineer who discuss all the data about
Pantabangan Dam on how they collect the data and how they
know the water capacity of the dam.

In this fieldtrip I liked the way they discuss how do they

provide water for irrigation and how they control the flood and
lastly on how they monitor all data that is important in monitoring
the dam.
Part III. Gallery

Figure 1: Information of Pantabangan Dam

Figure 2: Seminar and Discussion About History of

Pantabangan Dam
 Figure 3: Hydroelectric Power Plant

Figure 4: Tunnel Visit of Pantabangan Dam

 UNIVERSIDAD DE DAGUPAN
Arellano Street, Dagupan City

A Synthesis Presented to the Faculty of

School of Engineering
In Partial Fulfillment of the Requirements in the Course
CPE 19: Seminars and Fieldtrips
CE PC 13: Seminars and Fieldtrips
EEPC 11: Seminars/Colloquium
ECEPC 13: Seminars/Colloquium

Submitted by:

JERICHO P. VINLUAN
19-0262-751
BSCE 4

Submitted to:

Dr. Jose Jay R. De Vera, ECE, MEngg-ECE,Ph.D

Dean, School of Engineering

February 14, 2023

 DAY 2
Part I. Speaker’s Details

Company: Joyson Safety System

Address: 106 E Main Ave. Laguna Technopark, Biñan Laguna
Speaker’s Name: Gerry Menta and Rosario Baroto
Position of the Speaker: General Manager and Human Resources (HR)
Topic: Joyson Safety System and Product Process
Date: February 8 ,2023

Part II. Seminar Details

The following day, we visited Laguna Technopark Association

Inc. Here are a few of the factories, one of which is Joyson Safety
System. Here, we are given information on the items they produce;
it is stated that their products, such as air bags and seatbelts, are
for the safety of drivers and passengers. yet. We were made aware
of how it works. Following the orientation, we were split up into
groups and transported to the factory, where we were shown the
operations for waving, coating with glue, dyeing, cutting, sewing,
and testing in order of priority. The company prepared a nice
surprise for them in the final segment, where they played games,
answered questions, and gave out a small present. The final
segment of the presentation included a minor surprise from the
company, games, questions, a small gift from them, and a snack.

Even though I'm still in school and have no prior driving

experience, I loved their product's safety system for drivers and
passengers. I later realized the value of their product.

The topic on the seminar is all useful since it is all about

product for safety that help us as student that we can apply and
share to others.

9, they explain all the importance of their product if what it

is, what are the process, how it works and how it helps.

Part III. Gallery

Figure 5: Joyson Safety System

Company
Part I. Speaker’s Details

Company: Integrated Micro-Electronics (IMI)

Address: Biñan, Laguna
Speaker’s Name: Ronald Gabasan
Position of the Speaker: Training Specialist
Topic: All About Integrated Micro-Electronics (IMI)
Date: February 8 ,2023

Part II. Seminar Details

We visited IMI on the same day, which is also part of Laguna

Technopark Association Inc., where they gave us an introduction
to their business. IMI is a Filipino company called Arthur R. Tan,
and it has 22 manufacturing facilities worldwide, including Japan,
China, Serbia, Bulgaria, the Czech Republic, the United Kingdom,
the United States, and Europe. Australia and others. It was
founded in 1980 in the Philippines. It is 22nd among the 50 global
EMS providers, 19th in the list of top EMS providers, 6th largest in
the automotive EMS market, 14th largest EMS provider in Europe.
The company product serves as Automotive, Industrial, Power
electronics, Aerospace, Defense security, Communication and
Medical. IMI partners with Ayala their Real Estate, BPI their
Banking, Globe their Telecom, ACEnergy for Power and
ACIndustrial for Industrial. IMI University helps fresh graduates
for trainings and works in Technical, Behavioral, Environmental
safely and health and Technology. IMI Core Values for their
company is having Integrity, Customer focus, concern for others
and Excellence also they believe in "Resilient, agile and focused".

What I found appealing is that there is a sizable business in

the Philippines that is owned by Filipinos. This is a source of pride
for Filipinos and is very beneficial, especially for recent grads.

With a business like this one in the Philippines that aids

recent graduates in their technological education and enables
them to support one another through employment, it is not only
helpful but also a chance for us.

8, They provided all the necessary information regarding

their business, however it would have been preferable if they had
demonstrated how their items were made.
Part III. Gallery

Figures 5: Briefing about Integrated Micro-Electronics (IMI)

 DAY 3
Part I. Speaker’s Details

Company: Laguna Technopark Asssociation Inc.(Ltai)

Address: 109 South Science Ave., Laguna Technopark, Sta. Rosa,
Laguna
Speaker’s Name: Sir Ronald Gabasan
Position of the Speaker: Training Specialist
Topic: All About Integrated Micro-Electronics (IMI)
Date: February 9 ,2023

Part II. Seminar Details

Laguna Technopark Association Inc (Ltai) is a self-governing

body serving the needs of Laguna Technopark Businesses. Manage
security and maintenance of common areas within development.
LTAI's elected officers come from the tracking company's top
management, some ltai managers provide fire stations, jeepneys
that workers/employees use to get to the company they work
within his LTAI. We visited the LTAI museum, which contains all
information about the companies covered by the LTAI, companies
that were part of the LTAI, governors. Laguna Technopark is a
premier privately owned techno park and commercial facility
Located On Main Avenue, Binan, Laguna District, Santa Rosa,
Philippines. It is a huge industrial area of about 460 hectares, with
a concentration of factories and production innovations. it is a very
popular destination in the country for those interested in investing
in various industrial sectors and developing new technologies. We
learned that there are many factories and different company are in
the technopark and i like that they let us see the processes of their
work. They even let us enter and teach us the way they work. i rate
the speaker 6 out of 10. they only show us video presentation and
tell a little about them.

Part III. Gallery

 Figure 6: Presenting of LTAI about their company
Part I. Speaker’s Details

Company: Super Flex Logistic Inc.

Address: LTI, Phase 7a, Block 1, Lot 6 Mamplasan Rd, Biñan, Laguna
Speaker’s Name: Sir Mark Delfino
Position of the Speaker: Production Sr. Staff
Topic: Design and Fabrication of their Product
Date: February 9 ,2023

Part II. Seminar Details

On February 9,2023 , Universidad De Dagupan students a

went for a trip to Super Flex Logistic Inc. with an aim to visit and
to know what are their products and to know more details in terms
of their operation, to get exposure on products and also to learn
about labelling of products.

We were guided by an employee of Super Flex Logistics and

he explain all details about their product. During the tour we noted
down some notes and ask questions to the employee and they
show us some of the final output of their product.

We learned various things about this Super Flex Logistic

Incorporation and we found out that packaging and labelling is
very important to other companies like Toshiba and other
companies. The conduciveness if the environment of the Company
helped us more on product packaging which could help us to apple
in future especially for those interested in business.

8, They nicely discuss and present their products to us but

as a civil engineering student majoring structural we are not
compatible for this company ask we ask to employee if does a civil
engineering have a available position to your company? But he
answer as of now what we have is a architecture.

When our trip was ended It can be concluded that the trip to
Super Flex Logistic Incorporation was successful and we believed
that our objectives was achieved. We learned something new and
beneficial for us. But it was well recommended trip expecially to
the Marketing, IT and Accountancy students.
Part III. Gallery

Figure 7: Group Photo of Super Flex tour Guide and Universidad De Dagupan
Students
 DAY 4
Part I. Speaker’s Details

Company: DPWH Bustos

Address: Bustos, Bulacan
Speaker’s Name: Engr. Hilario and Engr. John Rene Otanes
Position of the Speaker: Structural Engineer and Material Engineer
Topic: Road and Bridge Construction from Bustos to Plaridel
Date: February 10 ,2023

Part II. Seminar Details

on February 9,2023 , Universidad De Dagupan students a

went as the government's primary engineering and construction
department, DPWH is responsible for planning, designing,
constructing and maintaining national roadways, major flood tide
control systems and other public works. The ministry of public
works and highways is assigned with continuously developing
technologies to insure the safety of all structure installations and
to insure the loftiest effectiveness and construction quality of all
public works and roadways. Acts as the government's engineering
and construction department.
The engineers tutored us on how they came up with a plan
on the road bypass design; it involves the construction of fresh 2
lanes for contract package 1 to contract package 4 as final stage.
There are two impacts of this design. the first one is to manage and
reduce business traffic and complement on- going, committed and
proposed systems for farther improvement and enhancement of
access and the alternate one is to encourage an increase in
economic conditioning and productivity on its influence areas. the
design cost is 5.26 billion pesos started July 2018 and anticipated
to finish on October 2023. going to commodity like DPWH is
blessing for us a civil engineering pupil, because we learned a lot
about our future work. They let us touch some of their equipment
and we go to their point which give us perceptivity on their work. ,
because the speaker joined during the site visit under the sun, he
no way gave up on demonstrating the uses and purpose of every
details.
10/10, Because the speaker joined during the site visit
under the sun, he never gave up on demonstrating the uses and
purpose on the site.
Part III. Gallery

Figure 8: Briefing about Road and Bridge Project from Bustos to Plaridel

Figure 9: Road Construction and details

Figure 10: Bridge Construction and steel slab details

Part I. Speaker’s Details

Company: UNITEC Pipe Manufacturing Corporation

Address: Marilao, Bulacan
Speaker’s Name: Ms. Jenny, Sir Eduardo Gazmin, and Sir Mark Felix
Position of the Speaker: HR Training Staff, Production Supervisor, QAQC
Topic: Pipe Production and Pipe Testing
Date: February 10 ,2023

Part II. Seminar Details

UNITEC pipe manufacturing corporation has been in the industry

for more than 26 years as a producer and distributor of high-quality local
and imported plumbing pipes and used in different ways for local
brands, UNITEC manufactures belden ppr system pipes for hot and cold
potable water and unitec hdpe for telecommunication lines and water
conveyance solutions. for imported brands, unitec distributes silenta
premium low noise pipes, wavin siphonic system, and alfaidro ppr-ct
pipes, which are 100% italian-made for potable water.

They also cater to environmentally friendly products such

as the flotender greywater containment system, the ecogen heat recovery
system, a water heating system with zero operating cost, and filtrific, an
advanced rainwater filtration system. unitec pipe has been a trusted
partner of more than 1000 hardware, developers, architects, and
designers nationwide.

10/10, Because this company are trusted and their

products are reccomendable for citizens who are able to build their house
or buildings

Part III. Gallery

UNITEC PIPE Manufacturing Corporation didn’t allow us to take picture Inside

and outside the Warehouse