Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 402 views

    SV12L

    Uploaded by

    yuttake
    The SV 12L is a 1⁄2" condenser microphone preamplifier that meets IEC 1094 standards for measuring microphones. It is designed to work with SVAN 94x sound analyzers. The rugged stainless steel case and ceramic circuit board provide maximum reliability and high performance. The preamplifier has a frequency range of 1 Hz to 200 kHz and low noise and distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SV12L

    Uploaded by

    yuttake
    402 views1 page
    The SV 12L is a 1⁄2" condenser microphone preamplifier that meets IEC 1094 standards for measuring microphones. It is designed to work with SVAN 94x sound analyzers. The rugged stainless steel case and ceramic circuit board provide maximum reliability and high performance. The preamplifier has a frequency range of 1 Hz to 200 kHz and low noise and distortion.

    Original Description:

    Data sheet svantek SV12L

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SV 12L is a 1⁄2" condenser microphone preamplifier that meets IEC 1094 standards for measuring microphones. It is designed to work with SVAN 94x sound analyzers. The rugged stainless steel case and ceramic circuit board provide maximum reliability and high performance. The preamplifier has a frequency range of 1 Hz to 200 kHz and low noise and distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    402 views1 page

    SV12L

    Uploaded by

    yuttake
    The SV 12L is a 1⁄2" condenser microphone preamplifier that meets IEC 1094 standards for measuring microphones. It is designed to work with SVAN 94x sound analyzers. The rugged stainless steel case and ceramic circuit board provide maximum reliability and high performance. The preamplifier has a frequency range of 1 Hz to 200 kHz and low noise and distortion.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    SV 12L

    ½ ” Microphone preamplifier

    The SV 12L is ½” condenser


    microphone preamplifier. The FREQUENCY CHARACTERISTICS
    SV 12L frequency response with 1/2" microphone @ 10 V output
    unit meets the IEC 1094
    0,5
    standard requirements for the
    measuring microphones. The
    0
    SV 12L preamplifier is No load With 10 m cable (SC 26/10)
    dedicated for the SVAN 94x

    dB
    -0,5
    sound analysers series. The
    rugged stainless steel case and -1
    ceramic electronic board ensure
    maximum reliability and high -1,5

    250

    800

    2500

    8000
    0,8

    2,5

    25

    80
    performance. Hz

    TECHNICAL SPECIFICATIONS
    Frequency range 1 Hz ÷ 200 kHz
    Input impedance 30 GΩ / 1.7 pF
    Output Connector TNC, impedance 50 Ω
    Noise A weighted: 3.5 µV RMS
    Linearity less than 6 µV RMS (1 Hz ÷ 20 kHz; microphone equivalent)
    Gain - 0.05 dB
    Power supply 24 V / 2 mA
    Environmental conditions Temperature -10 ºC to 60ºC (storage -30 ºC to 70ºC)
    Humidity up to 95 % RH, non condensed
    Dimensions Diameter: 12.7 mm (1/2 “), Length: 142 mm
    Weight approx. 65 grams
    Connector description
    (type TNC)
    Pin Signal
    Central Input
    Shield Ground

    INSTRUMENTATION FOR SOUND & VIBRATION


    .COM MEASUREMENTS

    You might also like