Technical data LR 1250

Hydraulic lift crane

Complies with ANSI/ASME B 30.5 1004.02
 Dimensions
Basic machine with undercarriage

R
87 9700 6050
00
3500 3000

4600
2150

1600

1345
1500 3740

520
7520 1200
8700 1830 7000

00
62
R

7600 1200
19200 5800
narrow track width

Operating weight Remarks

The operating weight includes the basic machine with crawlers, 1. The lifting capacities stated are valid for lifting operation only
2 main winches 120 kN including wire ropes (260 m and (corresponding with crane classification according to F.E.M.
495 m) and 20 m main boom, consisting of A-frame, boom 1.001. crane group A1).
foot (10 m), boom head (7 m) and boom extension (3 m),
82.3 t basic counterweight, 36 t carbody counterweight and 2. Crane standing on firm, horizontal ground.
250 t hook block.
3. The weight of the lifting device (hoisting ropes, hook block,
Total weight approx. 210 t shackle etc.) must be deducted form the gross lifting capacity to
obtain a net lifting value.

4. Additional equipment on boom (e.g. boom walkways, auxiliary jib)

Ground pressure must be deducted to get the net lifting capacity.

Ground bearing pressure 1.16 kg/cm2 5. For max. wind speed please refer to lift chart in operator‘s cab
or manual.

6. Working radii are measured from center of swing and under load.
Equipment 7. The lifting capacities are valid for 360 degrees of swing.
Main boom (No. 2320.xx) max. length 86 m
High reach (No. 2320.xx and 1916.xx) 117 m 8. Calculation of stability under load is based on ANSI/ASME B 30.5
Luffing jib (No. 1916.xx) max. length 95 m load ratings as well as ISO 4305 Table 2 and is tested according
Max. combination main boom 53 m to SAE J765.
luffing jib 95 m
Fixed jib (No. 1008.xx) 11 m – 26 m 9. Loads for calculation of structures are corresponding to F.E.M.
Auxiliary jib 24 t (option 36 t) 1.001-1998 and are tested according to SAE J987.

2 LR 1250 ANSI
 Transport dimensions and weights
Basic machine and main boom (No. 2320.xx)

3000 Basic machine

with A-frame, 2x 120 kN crane winches without boom foot, hoist
ropes, basic counterweight and crawlers
3220 Width 3000 mm
Weight 42500 kg
Option 1400 970 Weight of hoist rope 3.42 kg/m

11575 3300
Crawler 2 x
1345 Track pads 1200 mm
Width 1200 mm
8700 Weight 19800 kg

2500 Boom foot (No. 2320.25)

Width 2430 mm
Weight incl. winch and rope 5600 kg
10300 Weight without winch 4000 kg

2260 Boom section (No. 2320.23) 3 m

Width 2430 mm
3150 Weight with HPT1) 830 kg
Weight with HPT1) and NDL 2) 920 kg

2260
Boom section (No. 2320.23) 6 m
Width 2430 mm
6150 Weight with HPT1) 1295 kg
Weight with HPT1) and NDL 2) 1455 kg

2260

Boom section (No. 2320.23) 12 m

12150 Width 2430 mm
Weight with HPT1) 2340 kg
Weight with HPT1) and NDL 2) 2690 kg

2950

Boom head (No. 2320.23)

Width 2430 mm
8050
Weight with HPT1) 4300 kg
1) Pendant straps for main boom s 2) Pendant straps for jib

Boom transport option

Boom transport option

(No. 2320.xx/1916.xx) 12/12 6/6 3/3 m
Length 12250 6250 3250 mm
Weight* 3940 2145 1475 kg
*) Including pendant straps

LR 1250 ANSI 3
 Transport dimensions and weights
Luffing jib (No. 1916.xx)

Luffing jib head (No. 1916.21)

2200 Width 2010 mm

Weight* 1550 kg

7750
L-boom jib section (No. 1916.22) 1m
1950 Width 2010 mm
Weight* 460 kg
1150

Luffing jib section (No. 1916.18) 3 m

1850
Width 2010 mm
Weight* 475 kg
3150

1850 Luffing jib section (No. 1916.18) 6 m

Width 2010 mm
6150 Weight* 690 kg

1850
Luffing jib section (No. 1916.18) 12 m
12150 Width 2010 mm
Weight* 1250 kg

3150 Luffing jib foot with A-frames (No. 1916.22)

Width 2010 mm
10850 Weight* 6300 kg

2300 L-boom
section tapered (No. 2320/1916.20) 12 m
12220 Width 2430 mm
Weight* 1700 kg

Fixed jib (No. 1008.xx)

Fixed jib head (No. 1008.20)

Width 1090 mm
1020 Weight* 920 kg

6500
Fixed jib section (No. 1008.17) 3 m
1020
Width 1090 mm
Weight* 300 kg
3120

1020
Fixed jib section (No. 1008.17) 6 m
6120 Width 1090 mm
Weight* 455 kg

1850
Fixed jib foot with A-frame (No. 1008.20)

6620 Width 2200 mm

Weight* 1950 kg
*) Including pendant straps

4 LR 1250 ANSI
Transport dimensions and weights
Counterweight

Counterweight 1 x
640 Width 1660 mm
Weight 12000 kg
6050
Counterweight 1 x
Width 1660 mm
400 Weight 10000 kg

5790 Counterweight 12 x
Width 1360 mm
Weight 5000 kg
480
Carbody counterweight 2 x
1905
Width 3340 mm
Weight 9800 kg
825
Carbody counterweight 2 x
Width 3340 mm
2800
Weight 8300 kg

Mid fall (option)

Mid fall section (No. 1916.xx) 0.5 m

Width 750 mm
2060 Weight 715 kg

750 2000

Hooks

250 t hook block - 11 sheaves

770 Width 1030 1250 mm
Weight 2300 3200 kg
2230
160 t hook block - 7 sheaves
770 Width 640 760 880 mm
Weight 1500 2250 3000 kg
2100
100 t hook block - 5 sheaves
770
Width 540 670 770 mm
Weight 1300 1800 2300 kg
1800

40 t hook block - 1 sheave

800
Width 300 400 500 mm
1600 Weight 700 1100 1500 kg

400 12.5 t single hook

1100 Width 400 mm
Weight 600 kg

LR 1250 ANSI 5
 Technical description

Engine Main winches

Power rating according to ISO 9249, 230 kW (308 hp) at 1700 rpm Line pull (1st layer) max. 175 kN
Engine type Liebherr D 944 A7-04 Line pull (7th layer) 120 kN
Fuel tank 790 l capacity with continuous level Rope diameter 26 mm
indicator and reserve warning Drum diameter 580 mm
Engine complies with NRMM exhaust certification EPA/CARB Tier 4f Rope speed 0 – 136 m/min
and 97/68 EC Stage IV. Rope capacity in 7 layers 489 m
The winches are outstanding in their compact design and easy
assembly.
Propulsion is via a planetary gearbox in an oil bath.
Load support by the hydraulic system; additional safety factor provided
by a spring loaded, multi–disc holding brake.
The main winches use pressure controlled, variable flow hydraulic
motors. This system features sensors that automatically adjust oil flow
to provide max. winch speed depending on load.
Hydraulic system Option – winch with free-fall system:
A double axial displacement pump supplies the open loop hydraulic Clutch and braking functions on the free-fall system are provided by a
system, allowing all functions to be operated simultaneously. To compact designed, low wear and maintenance-free multi–disc brake.
minimize peak pressure an automatic working pressure cut–off is
integrated in the pump.
All filters are electronically monitored.
The use of synthetic environmentally friendly (biodegradable) oils is
possible.
Working pressure max. 350 bar
Oil tank capacity 650 l
Crawlers
Propulsion through axial piston motor, hydraulically released spring
loaded multi–disc brake, crawler tracks, hydraulic chain tensioning
device.
Track pads 1200 mm
Drive speed 0 – 1.6 km/h
Luffing jib winch
Line pull max. 105 kN
Rope diameter 20 mm
Jib luffing 51 sec. from 15° to 78°

Control
The heart of the hydraulic crawler cranes is the Liebherr control system
which has been developed and manufactured in-house.
It includes all control and monitoring functions and is designed to
Boom winch withstand extreme environmental conditions and heavy duty
construction tasks. Complete machine operating data as well as
Line pull max. 217 kN warning signals and irregularities are clearly displayed on the high
Rope diameter 24 mm resolution monitor in the operator‘s cab in the required language.
Boom up 130 sec. from 15° to 86° The electro-hydraulic proportional control allows several movements to
be performed simultaneously. This ensures that all categories of loads
can be positioned with utmost precision.
Option:
s¬ '3-'023¬TELEMATICS¬MODULE

Swing
Consists of rollerbearing with external teeth, swing drive with fixed
axial piston hydraulic motor, spring loaded and hydraulically released
multi–disc holding brake, planetary gearbox and pinion. Noise emission
Both swing modes are possible – speed control or free swing.
A multi–disc holding brake acts automatically at zero swing motion. Noise emissions correspond with 2000/14/EC directive on noise
Swing speed from 0 – 3 rpm continuously variable. emission by equipment used outdoors.

6 LR 1250 ANSI
 Boom combinations

7.0 m (23 ft)

No. 1916.21

12.0 m (40 ft)

No. 1916.18

12.0 m (40 ft)

No. 1916.18

7.0 m (23 ft)

No. 1916.21

1.0 m (39.4 inch) 12.0 m (40 ft)

No. 1916.22 No. 1916.18

12.0 m (40 ft)

No. 1916.18
12.0 m (40 ft)
No. 1916.18

5.5 m (18 ft) Mid fall 0.5 m (1.64 ft)

12.0 m (40 ft) No. 1008.20 No. 1916.32
No. 1916.18
6.0 m (20 ft)
No. 1008.17 12.0 m (40 ft)
No. 1916.18
6.0 m (20 ft)
No. 1008.17
7 m (23 ft) 12.0 m (40 ft)
No. 2320.23 3.0 m (10 ft)
No. 1916.18 No. 1008.17
5.5 m (18 ft) 12.0 m (40 ft)
No. 1008.20 No. 1916.18
12 m (40 ft)
No. 2320.23 7.0 m (23 ft)
12.0 m (40 ft) 6.0 m (20 ft)
No. 1916.18 No. 2320.23
No. 1916.18
3.0 m (10 ft)
No. 1916.18
12 m (40 ft) 6.0 m (20 ft) 12 m (40 ft)
No. 2320.23 No. 1916.18 No. 2320.23 7.0 m (23 ft)
No. 1916.22

7.0 m (23 ft)

Tapered 12.0 m (40 ft) No. 2320.23
12 m (40 ft)
No. 2320.23 No. 2320/1916.20 12 m (40 ft)
No. 2320.23

12 m (40 ft)
12 m (40 ft) No. 2320.23
12 m (40 ft) No. 2320.23
No. 2320.23 12 m (40 ft)
No. 2320.23

12 m (40 ft)
No. 2320.23
12 m (40 ft) 12 m (40 ft)
No. 2320.23 No. 2320.23 12 m (40 ft)
No. 2320.23

6 m (20 ft) 6.0 m (20 ft) 12 m (40 ft)

No. 2320.23 No. 2320.23 6 m (20 ft) No. 2320.23
3 m (10 ft) 3.0 m (10 ft) No. 2320.23
No. 2320.23 No. 2320.23
10 m (33 ft) 10.0 m (33 ft) 10.0 m (33 ft) 10.0 m (33 ft)
No. 2320.25 No. 2320.25 No. 2320.25 No. 2320.25

Main boom No. 2320.xx 86 m Max. combination 117 m Max. combination 97.0 m Max. combination 148 m
Main boom No. 2320.xx 43 m Main boom No. 2320.xx 71 m Main boom No. 2320.xx 53 m
Tapered Fixed jib Luffing jib
No. 2320/1916.xx 12 m No. 1008.xx 26 m No. 1916.xx 95 m
Luffing jib Main boom No. 2320.xx 56 m
No. 1916.xx 62 m Luffing jib
No. 1916.xx 74 m

LR 1250 ANSI 7
 Self assembly system

Unloading of basic machine

Unloading and assembly of boom foot

Unloading and assembly of crawlers

Unloading and assembly of carbody counterweight Unloading and assembly of boom

Unloading and assembly of counterweight

8 LR 1250 ANSI
Erecting of main boom to working position

Assembly of boom

Reeving of hoist and luffing jib ropes

Erecting of main boom and luffing jib Working position

LR 1250 ANSI 9
 Working range - main boom (No. 2320.xx) 86° – 15°
82.3 t counterweight and 36 t carbody counterweight

Auxiliary jib 24 t

2000
m
86
m
83 The maximum capacity of
m
80 the auxiliary jib is 24 t.
m
77 The corresponding load
m
74 chart is programmed in
m the LMI system.
71
m
68
m
65
m
62
m
59
m
56
m
53
m
50
m
47
m
44
m
41
m
38
m
35
m
32
m
29
m
26
m
23
m
20

Main boom configuration (Table 1 – No. 2320.xx)

Configuration for boom lengths (20 m - 86 m)
Length Amount of boom extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5
Boom head 7m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom length (m) 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83 86

10 LR 1250 ANSI
 Lift chart for main boom (No. 2320.xx)
82.3 t counterweight and 36 t carbody counterweight

Capacities in metric tonnes for boom lengths (20 m - 86 m) – with 120 kN winches
Boom length in (m)
Radius 20 26 32 38 44 50 56 62 68 74 80 86 Radius
(m) t t t t t t t t t t t t (m)
5.8 127.0 5.8
6 144.9 127.0 6
7 153.8 141.0 124.5 108.5 92.6 79.1 7
8 145.6 141.3 130.9 121.4 105.5 91.0 78.9 67.3 58.1 8
9 125.8 125.9 125.9 122.1 113.5 102.4 89.0 77.4 66.8 58.1 50.5 42.8 9
10 107.0 107.1 107.1 107.0 106.9 97.6 86.7 76.3 66.1 57.3 50.2 42.8 10
12 82.1 82.1 82.0 81.9 81.7 81.5 81.3 73.6 64.7 56.2 49.2 42.2 12
14 66.2 66.2 66.1 65.9 65.7 65.5 65.3 65.0 63.0 54.8 48.2 41.6 14
16 55.2 55.2 55.1 54.9 54.7 54.4 54.2 53.9 53.6 52.7 47.2 40.7 16
18 47.1 47.1 47.1 46.8 46.6 46.3 46.0 45.7 45.4 45.1 44.2 39.9 18
20 40.9 41.0 40.9 40.6 40.4 40.1 39.8 39.5 39.2 38.9 38.5 37.4 20
26 28.7 28.8 28.5 28.3 28.0 27.7 27.3 27.0 26.6 26.3 25.9 26
32 21.6 21.4 21.2 20.8 20.5 20.2 19.8 19.5 19.1 18.7 32
38 16.6 16.5 16.1 15.8 15.5 15.1 14.7 14.4 14.0 38
44 13.0 12.8 12.5 12.1 11.8 11.5 11.1 10.7 44
50 10.3 10.0 9.7 9.3 9.0 8.6 8.2 50
55 8.3 8.0 7.7 7.3 6.9 6.5 55
60 6.6 6.3 5.9 5.6 5.2 60
65 5.1 4.8 4.4 4.0 65
70 3.8 3.4 3.0 70
75 2.6 2.2 75
80 1.4 80
TLT 10576488 - N125509 Offiziell

Lift chart for main boom (No. 2320.xx)

72.3 t counterweight and 36 t carbody counterweight

Capacities in metric tonnes for boom lengths (20 m - 83 m) – with 120 kN winches
Boom length in (m)
Radius 20 26 32 38 44 50 56 62 68 74 80 83 Radius
(m) t t t t t t t t t t t t (m)
4.1 250.0* 4.1
5 217.4 194.3 169.9 5
6 190.4 181.4 165.2 144.9 127.0 6
7 166.7 162.4 153.8 141.0 124.5 108.5 92.6 79.1 7
8 139.7 139.9 140.0 130.9 121.4 105.5 91.0 78.9 67.3 58.1 8
9 115.5 115.6 115.6 115.5 113.4 102.4 89.0 77.4 66.8 58.1 50.5 46.2 9
10 98.2 98.2 98.2 98.1 98.0 96.1 86.7 76.3 66.1 57.3 50.2 46.1 10
12 75.2 75.2 75.2 75.0 74.8 74.6 74.3 72.3 64.7 56.2 49.2 45.4 12
14 60.6 60.6 60.5 60.3 60.1 59.9 59.6 59.4 58.1 54.8 48.2 44.5 14
16 50.5 50.5 50.4 50.1 49.9 49.7 49.4 49.1 48.9 47.7 46.4 43.7 16
18 43.0 43.0 42.9 42.7 42.5 42.2 41.9 41.6 41.3 41.0 39.8 39.2 18
20 37.2 37.3 37.3 37.0 36.8 36.5 36.2 35.9 35.6 35.2 34.7 34.1 20
26 26.1 26.1 25.8 25.6 25.3 25.0 24.6 24.3 23.9 23.6 23.4 26
32 19.4 19.3 19.0 18.7 18.4 18.0 17.7 17.3 17.0 16.8 32
38 14.9 14.7 14.4 14.1 13.7 13.4 13.0 12.6 12.4 38
44 11.6 11.3 11.0 10.7 10.3 10.0 9.6 9.4 44
50 9.0 8.7 8.4 8.0 7.6 7.3 7.1 50
55 7.2 6.8 6.5 6.1 5.8 5.6 55
60 5.5 5.2 4.9 4.5 4.3 60
65 4.1 3.8 3.4 3.2 65
70 2.9 2.5 2.3 70
75 1.7 1.5 75
TLT 10576488 - N125509 Offiziell

Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator‘s cab or manual.
*) Capacities over 220 t require a special heavy duty boom head.

LR 1250 ANSI 11
 L-boom high reach (No. 2320/1916.xx) 66 m – 117 m
Working range 84° – 15°

L-boom configuration with 43 m main boom (No. 2320.xx/1916.xx)

Configuration for L-boom lengths (60.5 m - 92.6 m)
Length Amount of boom and luffing jib extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 12 m 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Tapered 12 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing insert 3m 1 1 1 1 1 1 1 1 1
Luffing insert 6m 1 1 1 1 1 1 1 1 1
Luffing insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4
Luffing jib head 8m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Max. L-boom length (m) 66 69 72 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117

12 LR 1250 ANSI
 Lift chart for L-boom (No. 2320/1916.xx)

Main boom length 43 m Main boom length 55 m

Capacities in metric tons Capacities in metric tons
82,3 t counterweight and 36 t carbody counterweight 82,3 t counterweight and 36 t carbody counterweight
Boom length in (m) Boom length in (m)
Radius 66 75 90 99 108 117 Radius 78 90 96 102 108 114
(m) t t t t t t (m) t t t t t t
8.9 63.4 10.2 49.5
10 63.4 45.8 12 48.5 34.2
12 59.5 44.3 28.1 14 46.6 33.0 28.7 23.6 19.7
14 53.9 42.4 26.7 20.3 15.9 16 44.0 31.8 27.5 22.5 18.8 15.7
16 46.6 40.3 25.1 19.2 15.2 11.7 18 39.6 30.8 26.4 21.3 17.8 15.0
18 41.3 38.3 23.8 18.2 14.3 11.1 20 36.3 29.8 25.1 20.4 17.0 14.2
20 36.8 35.7 22.3 17.2 13.7 10.5 22 32.2 29.0 23.9 19.2 16.2 13.7
22 33.6 32.4 21.2 16.2 13.0 10.0 24 28.9 26.9 23.0 18.3 15.4 12.9
24 30.3 30.1 20.1 15.5 12.3 9.5 26 26.5 24.6 21.8 17.5 14.7 12.4
26 27.7 27.6 19.0 14.7 11.8 9.0 28 24.0 22.7 20.7 16.7 14.1 12.0
28 25.7 25.1 18.1 14.0 11.2 8.7 30 21.9 21.3 20.0 16.0 13.5 11.4
30 23.6 23.1 17.4 13.4 10.7 8.3 32 20.4 19.4 19.0 15.5 12.9 10.9
32 21.8 21.6 16.5 12.9 10.3 7.9 34 18.9 17.8 17.4 14.9 12.5 10.5
34 20.1 19.9 15.8 12.3 9.9 7.6 36 17.4 16.6 16.1 14.1 12.1 10.2
36 18.6 18.4 15.2 11.8 9.5 7.3 38 16.1 15.4 14.9 13.5 11.7 9.9
38 17.2 17.2 14.7 11.3 9.1 7.0 40 15.1 14.2 14.0 12.9 11.3 9.5
40 16.0 16.0 13.9 10.9 8.7 6.7 42 14.2 13.1 12.9 12.5 10.9 9.1
42 14.9 14.9 13.2 10.6 8.4 6.5 44 13.2 12.2 11.8 11.7 10.7 8.8
44 13.9 13.9 12.6 10.1 8.2 6.2 46 12.3 11.5 11.0 10.8 10.1 8.6
46 13.0 13.0 12.1 9.8 7.9 6.0 48 11.5 11.2 10.2 10.0 9.4 8.2
48 12.2 12.2 11.8 9.4 7.6 5.8 50 10.7 10.5 9.9 9.3 8.7 7.7
50 11.5 11.5 11.1 9.2 7.3 5.6 55 9.1 9.0 8.6 8.0 7.3 6.5
55 9.8 9.8 9.5 8.3 6.7 5.1 60 7.8 7.6 7.5 7.0 6.3 5.6
60 8.5 8.5 8.1 7.4 6.1 4.7 65 6.6 6.5 6.3 6.2 5.4 4.8
65 7.3 7.3 7.0 6.7 5.5 4.2 70 5.7 5.5 5.3 5.2 4.8 4.1
70 6.4 6.0 5.7 5.0 3.8 75 4.8 4.7 4.4 4.1 3.7 3.3
75 5.2 5.0 4.2 3.4 80 3.8 3.5 3.3 2.8 2.3
85 3.7 3.5 2.8 1.9 85 3.0 2.7 2.5 2.0 1.5
90 2.9 1.9 1.4 90 2.1 1.9 1.3 1.0
95 2.1 1.2 1.1 95 1.3
TLT 10576488 - N125509 Offiziell TLT 10576488 - N125509 Offiziell

Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator‘s cab or manual.

L-boom configuration with 55 m main boom (No. 2320.xx/1916.xx)

Configuration for L-boom lengths (72.5 m - 92.9 m)
Length Amount of boom and luffing jib extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 12 m 3 3 3 3 3 3 3 3 3 3 3 3 3
Tapered 12 m 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing insert 3m 1 1 1 1 1 1 1
Luffing insert 6m 1 1 1 1 1 1
Luffing insert 12 m 1 1 1 1 2 2 2 2 3 3
Luffing jib head 8m 1 1 1 1 1 1 1 1 1 1 1 1 1
Max. L-boom length (m) 78 81 84 87 90 93 96 99 102 105 108 111 114

LR 1250 ANSI 13
 Working range - luffing jib (No. 1916.xx) 78° – 15°
Main boom 88° – 45°

m
95

m
92 m
9
8 m
86 m
83 m
80 m
77 m
74 m
71 m
68 m
65 m
62 m
59 m
56 m
53 m
50 m
47 m
44 m
41 m
38 m
35 m
32 m
29 m
26 m
23 m
20

m
59 m
56 m
53 m
50 m
47 m
44 m
41 m
38 m
35 m
32 m
29 m
26 m
23

Boom configuration for main boom lengths (23 m – 59 m) – see table 1 on page 10
Jib configuration for jib lengths (20 m – 95 m)
Length Amount of luffing jib extensions
Luffing jib foot 7m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 3m 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 6m 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6
Luffing jib head 7m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib length (m) 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83 86 89 92 95

14 LR 1250 ANSI
 Lift chart - luffing jib (No.1916.xx)
Main boom 88°

Main boom 23 m Main boom 35 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
7.9 70.7 8.3 70.7
10 70.7 68.2 11 70.7 59.1
13 67.2 61.6 44.7 13 69.0 57.3 40.6
15 59.3 56.0 42.7 31.4 16 59.7 53.4 38.7 27.8
17 53.2 50.6 40.2 30.7 23.9 18 51.4 50.8 37.0 27.3 20.9
19 47.9 45.9 38.1 29.9 23.4 17.7 19 48.0 47.9 36.4 27.2 20.7 15.9
22 35.5 39.9 34.8 28.6 22.4 17.3 12.1 22 40.0 40.0 33.8 26.4 20.3 15.7 11.2
24 35.9 32.8 27.9 21.8 17.0 11.8 8.2 24 35.9 32.5 25.8 19.9 15.5 11.1 7.6
30 26.1 26.6 25.8 20.3 15.8 10.9 7.5 32 12.1 25.1 23.5 18.5 14.4 10.0 6.8
34 23.1 22.9 19.5 15.0 10.4 6.9 42 17.9 17.5 16.7 13.1 8.9 5.9
42 16.3 17.5 17.3 13.8 9.4 6.2 55 11.6 12.1 11.7 7.9 5.0
50 14.0 13.7 12.7 8.6 5.6 60 10.7 10.4 7.6 4.7
60 10.4 10.4 7.8 4.8 70 8.2 7.0 4.1
70 7.5 7.2 4.2 80 5.5 3.6
80 5.2 3.6 85 3.3
95 2.3 95 2.8

Main boom 44 m Main boom 53 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
8.7 65.0 9 53.9
11 64.1 50.8 11 51.8 41.1
13 61.0 49.4 35.0 14 48.3 39.0 29.2
16 55.3 46.5 34.0 24.5 16 45.5 37.4 28.4 21.0
18 51.4 44.5 32.9 24.1 18.7 18 43.2 35.8 27.5 20.7 16.6
20 45.1 42.2 31.9 23.6 18.4 14.6 20 40.9 34.1 26.8 20.3 16.4 13.0
22 40.0 40.0 30.6 23.1 18.1 14.4 10.4 24 12.1 31.2 24.9 19.4 15.7 12.7 9.4
26 32.6 28.3 21.9 17.4 13.9 10.2 7.0 26 29.6 24.0 18.7 15.4 12.4 9.2 6.4
32 25.3 24.7 20.3 16.3 13.2 9.6 6.4 32 25.2 21.4 17.2 14.4 11.7 8.8 6.0
44 12.1 16.5 14.3 11.7 8.4 5.5 44 16.8 14.3 12.4 10.3 7.9 5.1
55 12.3 12.1 10.6 7.6 4.8 55 12.2 10.8 9.2 7.0 4.5
60 10.7 10.0 7.3 4.5 60 10.1 8.7 6.8 4.2
70 8.1 6.8 3.9 70 7.6 6.2 3.7
80 5.6 3.4 80 5.4 3.3
85 3.2 85 3.1
95 2.8 95 2.7

Main boom 56 m Main boom 59 m

Jib length in (m) Jib length in (m)
20 29 35 41 53 62 71 74 20 29 35 41 50
Radius (m) t t t t t t t t Radius (m) t t t t t
9.1 49.5 9.2 45.9
11 47.8 38.4 12 43.6 35.4
13 45.5 37.4 32.3 13 42.4 34.8 30.2
14 44.5 36.6 31.8 27.6 14 41.4 34.0 29.7 25.9
16 42.0 35.1 30.7 26.9 20.0 16 39.2 32.7 28.7 25.2 20.5
18 40.0 33.6 29.7 26.0 19.8 15.8 18 37.4 31.3 27.8 24.4 20.2
20 37.9 32.1 28.4 25.3 19.4 15.7 12.5 20 35.5 29.9 26.6 23.7 19.7
22 36.1 30.6 27.5 24.3 18.8 15.3 12.4 11.6 22 34.2 28.5 25.7 22.8 19.1
24 12.1 29.4 26.2 23.6 18.5 15.0 12.2 11.4 24 12.1 27.4 24.5 22.1 18.6
32 24.7 22.2 20.3 16.4 13.7 11.3 10.6 32 23.5 20.8 19.0 16.4
38 19.9 18.1 15.0 12.7 10.6 9.9 36 19.5 17.6 15.4
44 16.3 13.6 11.8 9.9 9.3 38 19.0 17.0 14.9
55 11.7 10.2 8.8 8.3 42 16.1 13.9
60 9.6 8.3 7.9 44 15.6 13.5
70 7.5 7.1 48 12.8
75 6.7 50 12.5
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with luffing jib (No. 1916.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

LR 1250 ANSI 15
 Lift chart - luffing jib (No. 1916.xx)
Main boom 83°

Main boom 23 m Main boom 35 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
11.7 70.7 13.1 70.7
15 63.2 62.7 16 57.3 57.0
18 50.1 49.9 41.4 20 43.3 43.0 38.3
22 39.1 38.9 37.4 29.4 24 34.6 34.4 34.0 27.1
24 35.1 35.0 34.6 28.7 22.2 26 31.3 31.2 30.8 26.5 20.4
28 29.0 28.6 27.3 21.3 16.3 28 28.5 28.1 25.9 20.0 15.5
32 24.6 24.3 23.9 20.3 15.4 10.9 32 24.2 23.9 23.4 19.2 15.0 10.4
34 22.6 22.2 19.9 15.1 10.6 7.1 34 22.5 22.2 21.7 18.8 14.7 10.2
42 17.3 17.0 16.7 14.0 9.6 6.4 36 20.7 20.2 18.5 14.4 9.9 6.7
44 16.3 16.0 15.7 13.7 9.4 6.2 46 15.1 14.8 14.5 13.1 8.9 5.8
48 14.3 14.0 13.2 9.0 5.9 50 13.3 12.9 12.6 8.5 5.5
55 11.9 11.7 11.3 8.3 5.3 55 11.7 11.4 11.0 8.1 5.2
65 9.2 8.9 7.7 4.7 65 9.0 8.6 7.5 4.6
70 7.9 7.4 4.4 75 6.9 6.4 4.0
85 4.9 3.5 85 5.1 3.6
95 2.7 95 3.0

Main boom 44 m Main boom 53 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
14.2 64.2 15.3 52.2
17 52.3 50.4 18 47.9 40.6
22 38.0 37.7 34.1 22 37.3 37.0 29.0
24 34.1 33.9 33.1 24.5 26 30.4 30.2 27.6 20.8
26 30.9 30.7 30.3 24.3 28 27.7 27.6 26.8 20.5 16.4
28 28.1 27.7 23.8 18.5 32 23.4 23.0 19.6 16.0 12.8
30 25.8 25.4 23.3 18.2 14.3 34 21.7 21.4 19.2 15.7 12.6 8.9
34 22.1 21.8 21.3 17.5 13.9 9.8 36 20.2 19.9 18.8 15.4 12.4 8.9
36 12.1 20.3 19.9 17.2 13.7 9.6 38 18.6 18.1 15.2 12.2 8.7 5.8
38 19.0 18.5 17.0 13.4 9.4 6.2 48 13.8 13.4 13.1 11.2 7.9 5.2
46 14.9 14.5 14.2 12.5 8.6 5.6 55 11.2 10.9 10.5 7.4 4.8
55 11.4 11.2 10.8 7.9 5.0 60 9.9 9.6 9.2 7.1 4.5
65 8.8 8.4 7.3 4.5 65 8.5 8.2 6.9 4.3
75 6.7 6.3 3.9 75 6.5 6.0 3.8
85 4.9 3.5 85 4.8 3.3
100 2.6 100 2.8

Main boom 56 m Main boom 59 m

Jib length in (m) Jib length in (m)
20 29 35 41 53 62 71 74 20 29 35 41 50
Radius (m) t t t t t t t t Radius (m) t t t t t
15.7 48.2 16 45.0
19 44.5 37.7 19 42.6 35.0
22 37.1 35.8 31.5 27.3 22 36.9 33.3 29.4
26 30.2 30.0 29.5 26.1 19.8 24 33.1 32.2 28.5 25.2
28 27.6 27.4 27.1 25.3 19.5 15.6 26 30.0 29.8 27.6 24.6 20.2
32 23.3 23.1 22.8 18.7 15.2 12.3 11.3 28 27.4 27.2 26.6 23.8 19.8
34 21.6 21.4 21.2 18.3 15.0 12.2 11.3 30 25.0 24.8 23.2 19.4
36 20.1 19.9 19.8 17.9 14.7 12.0 11.1 34 21.4 21.2 21.0 18.5
42 16.4 16.3 15.8 13.8 11.4 10.6 38 12.1 18.5 18.3 17.4
48 13.7 13.3 12.9 10.8 10.1 40 17.3 17.2 16.9
55 11.1 10.8 10.1 9.5 42 16.3 16.2 15.8
60 9.8 9.5 9.1 9.0 44 15.2 14.9
65 8.5 8.1 8.0 46 14.4 14.1
70 7.2 7.1 48 13.6 13.3
75 6.4 6.3 50 12.6
80 5.6 55 11.1
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with luffing jib (No. 1916.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

16 LR 1250 ANSI
 Lift chart - luffing jib (No. 1916.xx)
Main boom 75°

Main boom 23 m Main boom 35 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
17,4 24,0 20,5 24,0
22 37,6 37,3 26 29,3 29,0
28 12,1 27,8 27,3 30 24,6 24,4 23,8
32 23,6 23,2 22,7 36 19,5 19,0 18,5
36 20,4 20,0 19,6 19,2 40 12,1 16,7 16,2 15,8
40 17,6 17,1 16,8 14,7 44 14,8 14,3 13,9 13,5
44 15,6 15,2 14,8 14,2 9,5 48 13,2 12,7 12,4 12,0 8,9
48 13,9 13,5 13,2 12,8 9,2 50 12,5 12,1 11,8 11,3 8,8
50 12,8 12,5 12,1 9,0 5,8 55 10,6 10,3 9,9 8,4 5,4
55 11,3 11,0 10,6 8,5 5,4 60 9,4 9,1 8,7 8,0 5,0
60 10,0 9,7 9,3 8,1 5,0 65 8,1 7,7 7,2 4,7
65 8,6 8,3 7,8 4,7 70 7,2 6,8 6,3 4,5
70 7,4 6,9 4,5 75 6,0 5,6 4,2
75 6,6 6,1 4,2 80 5,4 4,9 4,0
85 4,8 3,7 90 3,8 3,4
100 2,9 100 2,5

Main boom 44 m Main boom 53 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
22,8 24,0 25,2 27,9
28 25,7 25,4 30 22,6 22,1
32 21,8 21,5 21,0 34 19,3 19,0 18,4
38 17,4 16,9 16,4 36 12,1 17,7 17,1
42 15,3 14,9 14,4 14,0 40 15,5 15,0 14,4
46 13,3 12,8 12,4 12,0 44 13,7 13,3 12,7 12,3
50 11,9 11,4 11,1 10,6 8,5 48 11,9 11,3 11,0 10,2
55 10,0 9,7 9,2 8,2 5,2 50 11,2 10,7 10,3 9,7
60 8,9 8,5 8,1 7,5 4,9 55 9,8 9,4 9,0 8,4 7,5
65 7,8 7,6 7,1 6,6 4,7 60 8,3 7,9 7,4 6,5 4,7
70 6,7 6,3 5,8 4,4 65 7,3 7,0 6,6 5,7 4,5
75 5,6 5,1 4,2 75 5,5 5,1 4,4 3,5
80 5,0 4,5 3,8 80 4,5 3,8 3,0
85 3,9 3,3 85 4,0 3,4 2,5
90 3,5 2,8 95 2,6 1,8
105 1,8 105 1,2

Main boom 56 m Main boom 59 m

Jib length in (m) Jib length in (m)
20 29 35 41 53 71 74 20 29 35 41 50
Radius (m) t t t t t t t Radius (m) t t t t t
26 26,4 26,7 24,0
28 24,1 28 23,6
30 22,2 21,7 30 21,7
34 19,0 18,6 18,3 32 20,1 19,6
36 17,6 17,3 17,0 16,8 34 18,6 18,2 17,9
40 15,2 14,9 14,7 14,1 36 17,3 17,0 16,7 16,4
42 14,3 14,0 13,8 13,2 38 15,9 15,6 15,3
44 13,4 13,2 13,0 12,4 40 14,9 14,6 14,3 13,9
48 11,8 11,6 11,0 9,8 42 14,0 13,7 13,5 13,1
50 11,2 11,0 10,4 9,2 9,0 44 13,1 12,9 12,7 12,3
55 9,6 9,1 8,0 7,9 46 12,1 12,2 12,0 11,6
60 8,0 7,1 6,9 48 11,5 11,3 11,0
65 7,1 6,3 6,1 50 10,9 10,7 10,4
70 5,6 5,4 55 9,4 9,1
75 4,9 4,8 60 8,0
85 3,8 3,7 65 7,1
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with luffing jib (No. 1916.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

LR 1250 ANSI 17
 Lift chart - luffing jib (No. 1916.xx)
Main boom 65°

Main boom 23 m Main boom 35 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
24.1 24.0 29.2 23.3
30 24.4 24.1 36 18.0 17.6
32 12.1 22.3 42 14.5 14.0
38 18.0 17.6 44 13.7 13.2
40 16.9 16.5 50 11.2 10.7
44 14.6 14.1 55 9.8 9.3 9.0
50 12.4 12.0 11.6 60 8.2 7.9 7.4
55 10.5 10.2 9.7 65 7.3 7.0 6.5
60 9.3 9.0 8.6 70 6.2 5.7 5.2
65 8.0 7.6 7.1 75 5.5 5.1 4.5 3.8
70 7.1 6.7 6.2 4.7 80 4.5 4.0 3.3
75 6.0 5.5 4.4 85 3.9 3.4 2.8
80 5.3 4.8 4.2 90 3.0 2.4
85 4.3 3.8 95 2.6 2.0
90 3.8 3.3 100 1.7
100 2.4 105 1.4

Main boom 44 m Main boom 53 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71 83 95
Radius (m) t t t t t t t t Radius (m) t t t t t t t t
33 18.5 36.8 14.7
40 14.5 14.2 40 13.2
44 12.5 42 12.4 11.9
46 11.8 11.3 44 11.6 11.3
48 11.2 10.7 46 10.6
50 10.1 48 10.0
55 8.9 8.3 50 9.5 8.9
60 7.8 7.3 6.9 55 7.8
65 6.4 6.1 5.6 60 6.8 6.3
70 5.7 5.4 4.9 4.1 65 6.0 5.5 5.1
75 4.7 4.3 3.5 70 4.9 4.5 3.7
80 4.2 3.7 3.0 2.2 75 4.3 3.9 3.2 2.3
85 3.3 2.6 1.8 80 3.4 2.8 1.9 0.9
90 2.8 2.2 1.4 85 3.0 2.4 1.5
95 1.9 1.1 90 2.1 1.2
100 1.6 95 0.9

Main boom 56 m Main boom 59 m

Jib length in (m) Jib length in (m)
20 29 35 41 53 62 71 74 20 29 35 41 50
Radius (m) t t t t t t t t Radius (m) t t t t t
38.1 13.5 39.4 12.4
44 11.2 10.8 40 12.2
46 10.5 10.2 42 11.4
48 9.6 9.3 44 10.8
50 9.1 8.8 46 10.1 9.7
55 7.7 7.4 48 9.2 8.8
60 6.7 6.5 5.9 50 8.7 8.3
65 5.7 5.2 4.6 55 7.5 7.3 7.0
70 4.5 4.0 3.2 3.1 60 6.4 6.1 5.7
75 4.0 3.6 2.8 2.6 65 5.4 5.0
85 2.7 2.0 1.9 70 4.4
95 1.5 1.3 75 3.9
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with luffing jib (No. 1916.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

18 LR 1250 ANSI
 Lift chart - luffing jib (No. 1916.xx)
Main boom 45°

Main boom 23 m Main boom 35 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 71 83 95 20 29 41 53 62 71
Radius (m) t t t t t t t t Radius (m) t t t t t t
35.4 18.1 43.8 11.6
38 16.5 46 10.9
44 13.4 55 8.2
46 12.7 65 6.0
55 9.6 75 4.2
65 7.1 80 3.3
70 6.3 6.0 85 2.9
75 5.3 90 2.1
80 4.3 95 1.7
85 3.8 0
90 2.8 0
95 2.4 0
100 1.6
110 1.0

Main boom 44 m Main boom 53 m

Jib length in (m) Jib length in (m)
20 29 41 53 62 20 29 41
Radius (m) t t t t t Radius (m) t t t
50.2 8.1 56.6 5.2
60 5.8 65 3.7
70 4.0 75 2.2
80 2.5 80 1.8
85 2.1 1.8
90 1.5

Main boom 56 m Main boom 59 m

Jib length in (m) Jib length in (m)
20 29 35 41 20 29 35
Radius (m) t t t t Radius (m) t t t
58.7 4.3 60.8 3.5
60 4.2 70 2.2
70 2.7 75 1.5
75 2.0
80 1.4
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with luffing jib (No. 1916.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

LR 1250 ANSI 19
 Working range - fixed jib (No. 1008.xx) 15° and 30°
Main boom 88° – 30°

Boom configuration for boom lengths (20 m – 77 m) – see table 1 on page 10

Fixed jib configuration for fixed jib lengths (11 m – 26 m)
Length Amount of fixed jib extensions
Fixed jib foot 5.5 m 1 1 1 1 1 1
Fixed jib insert 3m 1 1 1
Fixed jib insert 6m 1 1 2 2
Fixed jib head 5.5 m 1 1 1 1 1 1
Fixed jib length (m) 11 14 17 20 23 26

20 LR 1250 ANSI
 Lift chart - fixed jib (No. 1008.xx)
Offset 15°

Main boom 20 m Main boom 29 m Main boom 38 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 20 26
(m) t t t t (m) t t t t (m) t t t t
9 35.9 35.9 8 35.9 35.9 6.3 35.9
11 35.9 34.9 30.9 10 35.9 35.9 32.2 8 35.9 35.9
12 35.9 34.2 30.2 23.7 12 35.9 35.1 31.1 23.7 10 35.9 35.9 32.3
14 35.9 32.5 27.8 22.3 16 35.9 32.6 27.2 21.4 13 35.9 35.4 31.3 23.2
16 35.7 30.9 25.7 21.2 20 35.5 30.2 23.2 18.7 16 35.9 34.0 29.3 21.6
20 34.6 28.0 21.6 17.7 28 26.3 25.5 18.4 14.5 20 35.9 31.9 25.6 19.5
24 29.2 24.8 18.7 15.1 32 21.9 22.2 16.6 12.9 28 25.7 26.1 20.7 15.5
28 25.7 22.3 16.4 13.1 36 18.5 18.8 15.0 12.1 36 18.0 18.3 17.1 12.8
30 24.2 21.1 15.3 12.3 38 17.1 17.4 14.3 11.6 46 12.2 12.5 12.9 10.9
32 19.9 14.4 11.9 40 16.1 13.8 11.1 48 11.6 12.1 10.6
38 12.5 10.2 46 12.4 10.0 55 9.5 9.6
44 9.0 50 9.3 60 8.4

Main boom 47 m Main boom 56 m Main boom 62 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 20 26
(m) t t t t (m) t t t t (m) t t t t
6.6 35.9 6.9 35.9 7.1 35.9
8 35.9 35.9 9 35.9 35.9 9 35.9 35.9
11 35.9 35.9 31.2 11 35.9 35.9 31.1 11 35.9 35.8 30.4
13 35.9 35.9 30.7 23.2 13 35.9 35.8 30.5 21.8 13 35.9 35.6 29.9 21.2
16 35.9 34.4 29.7 22.0 16 35.9 35.2 29.7 21.2 16 35.9 35.2 29.1 20.7
20 35.9 32.6 26.1 20.0 20 35.6 33.6 27.5 20.1 20 35.9 33.7 27.6 19.8
28 25.2 25.6 21.5 16.5 28 24.7 25.0 22.8 17.3 28 24.3 24.7 23.4 17.4
36 17.5 17.7 18.3 13.8 36 16.9 17.2 17.8 14.6 36 16.5 16.8 17.4 14.9
50 10.1 10.3 10.8 11.1 55 7.8 8.1 8.5 8.9 55 7.4 7.7 8.1 8.5
55 8.6 9.1 9.4 60 6.4 6.6 7.1 7.4 65 4.9 5.1 5.5 5.8
60 7.6 8.0 70 4.8 5.1 75 3.5 3.8
65 6.7 75 4.2 80 3.0

Main boom 68 m Main boom 71 m Main boom 74 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 17
(m) t t t t (m) t t t t (m) t t t
7.3 35.9 7.4 35.9 7.6 35.9
9 35.9 35.6 9 35.9 35.0 9 35.9 34.4
11 35.9 35.3 29.2 11 35.9 34.7 28.1 10 35.9 34.4 32.5
16 35.9 34.6 28.2 20.2 14 35.9 34.3 27.7 20.2 12 35.9 34.1 32.3
20 35.9 33.6 27.3 19.4 16 35.9 34.0 27.2 20.0 16 35.9 33.6 31.3
28 24.0 24.4 23.9 17.4 20 35.9 33.2 26.5 19.2 20 35.9 32.9 30.4
36 16.1 16.5 17.1 15.3 36 16.0 16.3 16.9 15.5 28 23.7 24.0 24.4
55 7.1 7.3 7.7 8.1 55 6.9 7.1 7.6 8.0 36 15.8 16.1 16.4
70 3.5 3.7 4.0 4.4 70 3.3 3.5 3.9 4.2 44 10.9 11.2 11.5
75 2.8 3.1 3.5 75 2.6 3.0 3.3 55 6.7 6.9 7.2
80 2.3 2.7 80 2.2 2.5 75 2.2 2.4 2.6
85 1.9 85 1.8 80 1.6 1.8
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with fixed jib (No. 1008.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

LR 1250 ANSI 21
 Lift chart - fixed jib (No. 1008.xx)
Offset 30°

Main boom 20 m Main boom 29 m Main boom 38 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 20 26
(m) t t t t (m) t t t t (m) t t t t
11 35.8 10 35.9 8.9 35.9
12 34.1 28.3 11 35.9 29.1 11 35.9 29.9
14 31.5 26.3 19.1 15 32.4 26.6 19.1 15 33.9 28.3 19.7
16 28.8 24.3 18.1 18 29.3 24.2 17.3 13.2 19 30.4 25.3 17.6 13.2
18 26.8 22.8 16.7 13.4 20 27.7 23.0 16.2 12.7 20 29.6 24.8 17.2 12.9
20 24.9 21.8 15.6 12.4 28 23.2 19.2 13.3 10.8 28 24.9 21.4 14.3 11.2
24 22.8 19.2 13.7 11.4 32 21.8 17.8 12.2 9.9 36 18.2 18.6 12.4 9.7
28 21.2 17.3 12.3 10.1 36 18.7 16.7 11.8 9.0 44 13.3 13.6 11.5 8.4
30 20.5 16.7 12.1 9.6 38 17.2 16.4 11.5 8.7 46 12.3 12.6 11.3 8.2
34 15.8 11.2 8.7 40 16.1 11.2 8.4 48 11.7 11.2 8.0
40 10.5 7.7 46 10.6 7.7 55 9.6 7.5
46 7.3 50 7.4 60 7.3

Main boom 47 m Main boom 56 m Main boom 62 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 20 26
(m) t t t t (m) t t t t (m) t t t t
9.3 35.9 9.6 35.9 9.8 35.9
12 35.9 29.0 12 35.9 29.6 12 35.9 29.5
15 35.4 27.8 18.7 16 35.5 28.3 19.4 16 35.2 28.4 19.2
19 32.0 25.5 17.6 13.2 19 32.9 27.1 18.2 12.9 19 33.4 27.4 18.3 12.8
20 31.3 25.0 17.2 13.0 20 32.3 26.5 17.8 13.1 20 32.7 26.8 17.9 13.1
28 25.7 21.9 14.7 11.4 28 25.3 23.1 15.5 11.7 28 25.0 23.3 15.6 11.9
36 17.8 18.2 12.9 10.0 36 17.3 17.7 13.7 10.4 36 17.0 17.4 14.0 10.6
44 12.8 13.2 12.0 8.9 55 8.0 8.3 8.8 8.3 55 7.6 7.9 8.5 8.4
50 10.2 10.5 11.1 8.3 60 6.5 6.8 7.3 7.8 65 4.9 5.2 5.7 6.1
55 8.7 9.3 7.9 65 5.5 6.0 6.5 70 4.1 4.6 5.0
60 7.7 7.5 70 4.9 5.3 75 3.6 4.0
65 6.9 75 4.3 80 3.1

Main boom 68 m Main boom 71 m Main boom 74 m

Fixed jib length in (m) Fixed jib length in (m) Fixed jib length in (m)
Radius 11 14 20 26 Radius 11 14 20 26 Radius 11 14 17
(m) t t t t (m) t t t t (m) t t t
10 35.9 10.1 35.8 10.2 34.3
12 35.9 29.2 12 35.8 28.3 13 34.2 27.5
16 35.0 28.4 19.0 16 34.9 27.6 18.6 14 34.1 27.4 22.0
20 33.1 27.0 18.0 12.9 20 33.2 26.3 17.7 12.9 16 34.0 27.0 22.4
28 24.7 23.7 15.8 12.0 28 24.5 24.0 15.6 12.0 18 34.0 26.5 21.7
36 16.6 17.1 14.2 10.7 36 16.5 16.9 14.0 10.8 20 33.3 26.1 20.9
44 11.7 12.0 12.7 9.7 44 11.5 11.9 12.6 9.7 28 24.4 24.0 18.5
55 7.3 7.6 8.2 8.6 55 7.1 7.4 8.0 8.6 36 16.3 16.8 16.7
70 3.6 3.8 4.3 4.7 65 4.4 4.7 5.2 5.7 44 11.3 11.7 12.1
75 2.8 3.3 3.7 75 2.5 2.7 3.1 3.6 55 6.9 7.2 7.6
80 2.4 2.8 80 2.3 2.7 75 2.3 2.5 2.7
85 2.0 90 1.1 80 1.6 1.9
TLT 10576488 - N125509 Offiziell

Capacities in metric tonnes with fixed jib (No. 1008.xx), 82.3 counterweight + 36 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

22 LR 1250 ANSI
Notice

LR 1250 ANSI 23
 LR 1250 ANSI Metrisch —11246396—09/2015 Subject to change without notice.

Liebherr-Werk Nenzing GmbH

Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria
Tel.: +43 50809 41–473, Fax: +43 50809 41–499
crawler.crane@liebherr.com, www.liebherr.com
facebook.com/LiebherrConstruction