Technical data LR 1300 SX

Hydraulic lift crane

LR 1300
 Dimensions
Basic machine with undercarriage

R
97
50 10350 6930
3600 3000

LR 1300

5000
2250

1600

1465
1700 4260

400
8500 1200
9650 1870 8000

Optional:
980
R6 8000 Track pads 1500 mm

1485
400
8560 1500
20365 8300

Operating weight Remarks

The operating weight includes the basic machine with crawlers, 1. The lifting capacities stated are valid for lifting operation only
2 main winches 150 kN and 20 m main boom, consisting of A-frame, (corresponding with crane classification according to F.E.M.
boom foot (10 m), boom head (7 m), boom extension (3 m), 124 t 1.001. crane group A1).
basic counterweight, 57 t carbody counterweight and 300 t hook
block. 2. Crane standing on firm, horizontal ground.

Total weight approx. 290 t 3. The weight of the lifting device (hoist ropes, hook block, shackle
etc.) must be deducted from the gross lifting capacity to obtain a
net lifting value.

4. Additional equipment on boom (e.g. boom walkways, auxiliary jib)

Ground pressure must be deducted to get the net lifting capacity.
The ground bearing pressure depends on 5. For max. wind speed please refer to lift chart in operator‘s cab
the crane configuration and load 1.45 kg/cm2 or manual.

6. Working radii are measured from centre of swing and under load.

7. The lifting capacities are valid for 360 degrees of swing.

Equipment
8. Calculation of stability under load is based on DIN 15019 / part 2 /
Main boom (No. 2821.xx) max. length 92 m chart 1 and ISO 4305 Table 1 + 2 tipping angle 4°.
Luffing jib (No. 2316.xx) max. length 113 m
Max. combination main boom 56 m and luffing jib 113 m 9. The structures are calculated according to F.E.M. 1.001 - 1998
Auxiliary jib 36 t (EN 13001-1; EN 13001-2).

2 LR 1300 sx
 Transport dimensions and weights
Basic machine and boom (No. 2821.xx)

Basic machine
3000 with A-frame, 2x 150 kN crane winches, without boom foot, basic
counterweight and crawlers
Width 3000 mm
3300
Weight without hoist rope* 46000 kg
Weight incl. hoist rope* 51000 kg
Оption 1415 975

12200 3360 Crawler

Optional Standard
1465 Track pads 1500 mm 1200 mm
Width 1500 mm 1400 mm
9650 Weight 26200 kg 22350 kg

2650 Boom foot (No. 2821.30)

Width 2970 mm
Weight without winch 5700 kg
10300 Weight incl. winch and rope 7400 kg

2470 Boom section (No. 2821.30) 3 m

Width 2970 mm
Weight incl. main boom pendants 1400 kg
3250
Weight incl. main boom and luffing jib pendants 1500 kg

2470
Boom section (No. 2821.30) 6 m
Width 2970 mm
6250 Weight incl. main boom pendants 2130 kg
Weight incl. main boom and luffing jib pendants 2310 kg

2470
Boom section (No. 2821.30) 12 m
Width 2970 mm
12250
Weight incl. main boom pendants 3760 kg
Weight incl. main boom and luffing jib pendants 4120 kg

3100

Boom head (No. 2821.24)

Width 2970 mm
8200
Weight incl. main boom pendants 5400 kg

2470
Boom - luffing jib transport option
No. 2821.xx/2316.xx 12/12 6/6 3/3 m
2970 Length 12500 6250 3250 mm
Weight* 5920 3260 2100 kg
*) Weights depend on the equipment installed

LR 1300 sx 3
 Transport dimensions and weights
Luffing jib (No. 2316.xx)

Luffing jib head (No. 2316.20)

2180 Width 2430 mm
Weight* 2300 kg
10750
Luffing jib section (No. 2316.20) 12 m
1910
Width 2430 mm
Weight* 1800 kg
12150

Luffing jib section (No. 2316.20) 6 m

1910
Width 2430 mm
6150 Weight* 950 kg

1910
Luffing jib section (No. 2316.20) 3 m
Width 2430 mm
3150 Weight* 600 kg

2010 L - boom jib section (No. 2316.20) 1 m

Width 2430 mm
1150
Weight* 640 kg

3300
Luffing jib foot with A-frames (No. 2316.22)
Width 2670 mm
Weight* 8060 kg
11720

L - boom
2470 section tapered (No. 2821/2316.24) 12 m
Width 2970 mm
12180
Weight* 2700 kg

*) including pendants

Fixed jib (No. 0906.21)

Fixed jib (No. 0906.21)

1800 Width 1500 mm
Weight* 2400 kg
9200

*) including pendants

Fixed jib (No. 1507.20)

Fixed jib (No. 1507.20)

2710 Width 2470 mm
Weight* 3300 kg
10180
*) including carbon fibre pendants

4 LR 1300 sx
Transport dimensions and weights
Counterweights

Counterweight 1x
Width 2110 mm
615
Weight 14500 kg
6870
Counterweight 6x
Width 2110 mm
Weight 5000 kg
2130 395
Counterweight 8x
680 Width 2110 mm
Weight 10000 kg
2130
Carbody counterweight 4x
Optional Standard
5540
(оptional 5240) 350 Width 1500 mm 1200 mm
Weight 13400 kg 14250 kg

Hooks

300 t hook block – 11 sheaves

820 Width 880 1230 mm
Weight 3200 5500 kg
2500
150 t hook block – 5 sheaves
820 Width 500 660 820 mm
Weight 1600 2800 4000 kg
2200
100 t hook block – 3 sheaves
820 Width 340 480 620 mm
Weight 1100 2050 3000 kg
1990
50 t hook block – 1 sheave
820 Width 280 410 540 mm
Weight 800 1600 2400 kg
1850
16 t single hook
Width 500 mm
1100 500 Weight 900 kg

LR 1300 sx 5
 Dimensions (optional)
Basic machine with telescopic undercarriage

R
97
50
10570 6930
3820 3000

5160
2400

1760

1475
1700 4260

520
8520 1200
9675 8000

5170

520
6370
7100

980
R6

520

2400
8560 4800
20365 7100

6 LR 1300 sx
Transport dimensions and weights (optional)
Basic machine

3000 Basic machine

with A-frame, 2x 150 kN crane winches, without boom foot, hoist
3500
ropes, basic counterweight and crawlers
Width 3000 mm
Weight 46500 kg
Option 1415 968

12300 3285
Crawler
1475 Track pads 1200 mm
Width 1200 mm
9675 Weight 23000 kg

Carbody counterweights (optional)

Carbody counterweight 2x
Width 1800 mm
3180 200 Weight 6200 kg

770 Carbody counterweight 2x

3530 Width 1800 mm
Weight 20100 kg

LR 1300 sx 7
 Boom combinations

10 m (32.8 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20

12 m (40 ft)
No. 2316.20
7 m (23 ft) 7 m (23 ft) 8 m (26 ft)
No. 2821.24 No. 0907.21 No. 1507.20

12 m (40 ft)
12 m (40 ft) 7 m (23 ft) 7 m (23 ft) No. 2316.20
No. 2821.30 No. 2821.24 No. 2821.24
6 m (20 ft)
12 m (40 ft) 12 m (40 ft) No. 2316.20
12 m (40 ft) No. 2821.30 No. 2821.30 3 m (10 ft)
No. 2821.30 No. 2316.20
10 m (32.8 ft)
No. 2316.22
12 m (40 ft) 12 m (40 ft)
12 m (40 ft) No. 2821.30 No. 2821.30
No. 2821.30 7 m (23 ft)
No. 2821.24
12 m (40 ft) 12 m (40 ft)
No. 2821.30 No. 2821.30 12 m (40 ft)
12 m (40 ft)
No. 2821.30 No. 2821.30

12 m (40 ft) 12 m (40 ft)

12 m (40 ft) No. 2821.30 No. 2821.30 12 m (40 ft)
No. 2821.30 No. 2821.30

12 m (40 ft) 12 m (40 ft)

12 m (40 ft) No. 2821.30 No. 2821.30 12 m (40 ft)
No. 2821.30 No. 2821.30
6 m (20 ft) 6 m (20 ft)
3 m (10 ft) No. 2821.30 No. 2821.30 3 m (10 ft)
No. 2821.30 No. 2821.30
10 m (32.8 ft) 10 m (32.8 ft) 10 m (32.8 ft) 10 m (32.8 ft)
No. 2821.30 No. 2821.30 No. 2821.30 No. 2821.30

Main boom No.2821.xx 92 m Max. combination 90 m Max. combination 91 m Max. combination 169 m
Main boom No. 2821.xx 83 m Main boom No. 2821.xx 83 m Main boom No. 2821.xx 56 m
Fixed jib No. 0906.21 7m Fixed jib No. 1507.21 8m Luffing jib No. 2316.xx 113 m
Max. combination 106 m
Main boom No. 2821.xx 68 m
Luffing jib No. 2316.xx 38 m

8 LR 1300 sx
 Technical description

Engine Main winches

Power rating according to ISO 9249, 390 kW (523 hp) at 1900 rpm Line pull (1st layer) max. 215 kN
Engine type Liebherr D 856 A7 SCR Line pull (7th layer) 150 kN
Fuel tank 900 l capacity with continuous level Rope diameter 28 mm
indicator and reserve warning Drum diameter 730 mm
Engine complies with NRMM exhaust certification EPA/CARB Tier 4i Rope speed 0 – 138 m/min
or 97/68 EC Stage IIIB. Rope capacity in 7 layers 570 m
The winches are outstanding in their compact design and easy
assembly.
Propulsion is via a planetary gearbox in an oil bath.
Load support by the hydraulic system; additional safety factor
Hydraulic system provided by a spring loaded, multi–disc holding brake.
The main winches use pressure controlled, variable flow hydraulic
An axial displacement pump supplies the open loop hydraulic motors.
system for boom luffing, jib luffing and travel. The main hoist winches This system features sensors that automatically adjust oil flow to
and swing are operated in a closed loop system. All functions provide max. winch speed depending on load.
can be operated simultaneously. To minimize peak pressure an
automatic working pressure cut–off has been installed. All filters are Option – winch with free-fall system:
electronically monitored. Line pull (1st layer in crane operation) max. 190 kN
The use of synthetic environmentally friendly (biodegradable) oils is Line pull (7th layer in crane operation) 130 kN
possible. Line pull (1st layer in free-fall operation) 170 kN
Working pressure max. 350 bar Line pull (7th layer in free-fall operation) 118 kN
Oil tank capacity 900 l Rope diameter 28 mm
Drum diameter 730 mm
Rope speed 0 – 107 m/min
Rope capacity in 7 layers 570 m
The winches are outstanding in their compact design and easy
assembly.
Luffing jib winch Clutch and braking functions on the free-fall system are provided by a
compact designed, low wear and maintenance-free multi–disc brake.
Line pull max. 105 kN
Rope diameter 20 mm
Jib luffing 69 sec. from 15° to 78°

Control
Boom winch
The control system – developed and manufactured by Liebherr – is
Line pull max. 217 kN designed to withstand extreme environmental conditions such as
Rope diameter 24 mm temperature, vibration and electromagnetic interference and to meet
Boom up 127 sec. from 15° to 86° all requirements that are needed in heavy duty crane operation.
Complete machine operating data are shown on a high resolution
display. Standard operational information is displayed by means of
graphical symbols, fault indications are displayed in plain text (more
than 15 languages available).
The cranes are equipped with proportional control for all main
Crawlers movements, which can be carried out simultaneously.
Propulsion through axial piston motor, hydraulically released spring The crane is operated with 2 multi–directional joysticks, the right for
loaded multi–disc brake, crawler tracks, hydraulic chain tensioning winch I and boom, the left for winch II and swing control.
device. Option:
Track pads 1200 mm (optional 1500 mm) Bi–directional double T–levers for simultaneous boom and luffing jib
Drive speed 0 – 1.3 km/h operation.
The crawlers are activated by the two foot pedals. Additionally, hand
levers can be attached to the pedals.
Remote control for assembly of counterweight and boom hinge pins.

Swing
Consists of rollerbearing with external teeth, swing drive with fixed
axial piston hydraulic motor, spring loaded and hydraulically released
multi–disc holding brake, planetary gearbox and pinion. Noise emission
Both swing modes are possible – speed control or free swing.
A multi–disc holding brake acts automatically at zero swing motion. Noise emissions correspond with 2000/14/EC directive on noise
Swing speed from 0 – 1.8 rpm continuously variable. emission by equipment used outdoors.

LR 1300 sx 9
 Self-assembly system

Unloading of basic machine

Unloading and assembly of crawlers

Unloading and assembly of carbody counterweight Unloading and assembly of boom

Unloading and assembly of counterweight

Unloading and assembly of boom foot

10 LR 1300 sx
Erecting of main boom to working position

Assembly of boom

Reeving of hoist and luffing jib ropes

Erecting of main boom and luffing jib Working position

LR 1300 sx 11
 Main boom (No. 2821.xx) 86° – 15°
124 t counterweight and 57 t carbody counterweight

ft m
340 104
Auxiliary jib 36 t
100
320 86°
96 80°

300 92 70°
88
280 °
84 60
2000
260 80
m
76 ° 92 m The maximum capacity
50 89 m of the auxiliary jib is 36 t.
240
72 86 m The corresponding load
83 m chart is programmed in
68
220 80 m the LMI system.
64 77 m
°
40

200 74 m
60 71 m
56 68 m
180 65 m
52 62 m
160 59 m
48
56 m
°
30

44 53 m
140 50 m
40 47 m
120 44 m
36
41 m
38 m
20°

32
100 35 m
28 32 m
80 24 29 m
15°

26 m
20 23 m
60 20
16

40 12

8
20
4

0 0
88 84 80 76 72 68 64 60 56 52 48 44 40 36 32 28 24 20 16 12 8 4 0m

280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 ft

Main boom configuration ( No. 2821.xx)

Configuration for boom lengths between 20 m and 92 m
Length Amount of boom extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6
Boom head 7m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom length (m) 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83 86 89 92

12 LR 1300 sx
 Lift chart for main boom (No. 2821.xx)
104 t counterweight and 57 t carbody counterweight

Boom length in (m)

Radius 20 23 26 32 38 44 50 56 62 68 74 80 83 86 Radius
(m) t t t t t t t t t t t t t t (m)
4.3 300.5 4.3
5 300.5 292.6 295.3 5
6 261.5 260.0 256.1 245.5 236.5 213.4 6
7 225.5 225.3 222.0 215.8 206.9 198.3 189.3 169.3 7
8 195.9 195.7 195.2 191.1 184.6 178.4 168.6 161.3 151.1 135.3 8
9 172.9 172.8 172.2 171.8 166.0 160.2 152.7 145.0 137.8 131.1 118.7 103.1 95.6 88.9 9
10 154.5 154.4 153.8 153.4 151.1 143.6 136.5 130.1 124.0 118.3 111.8 101.7 95.6 88.9 10
12 126.8 126.7 126.2 125.8 122.6 117.3 112.1 107.4 102.8 98.5 94.4 90.5 87.5 83.3 12
14 107.0 106.9 106.5 106.1 102.8 98.7 94.7 91.0 87.3 83.9 80.5 77.4 75.8 74.3 14
16 89.2 89.3 89.2 89.1 88.1 84.8 81.5 78.5 75.5 72.6 69.8 67.1 65.8 64.5 16
18 75.6 75.8 75.6 75.5 75.1 74.1 71.3 68.7 66.1 63.7 61.2 58.9 57.7 56.6 18
20 65.2 65.5 65.4 65.3 64.8 64.5 63.1 60.8 58.5 56.4 54.2 52.2 51.1 50.1 20
24 50.8 50.8 50.8 50.3 49.9 49.3 48.8 47.1 45.3 43.5 41.8 40.9 40.0 24
26 45.3 45.4 44.9 44.5 43.9 43.4 42.6 41.0 39.3 37.7 36.9 36.0 26
32 33.7 33.4 33.0 32.4 31.8 31.2 30.6 29.6 28.3 27.6 26.8 32
38 25.7 25.4 24.8 24.3 23.6 23.0 22.3 21.6 21.0 20.4 38
42 21.6 21.0 20.5 19.8 19.2 18.5 17.9 17.5 17.0 42
50 15.3 15.0 14.3 13.7 13.0 12.4 12.0 11.6 50
55 12.3 11.7 11.1 10.4 9.7 9.4 9.0 55
60 9.4 8.9 8.2 7.5 7.2 6.8 60
65 7.0 6.3 5.7 5.4 5.0 65
70 4.7 4.1 3.7 3.2 70
75 2.5 2.1 75
TLT 10525129 M00000 Preliminary 5

Lift chart for main boom (No. 2821.xx)

124 t counterweight and 57 t carbody counterweight

Boom length in (m)

Radius 20 23 26 32 38 44 50 56 62 68 74 80 83 86 89 92 Radius
(m) t t t t t t t t t t t t t t t t (m)
6.4 189.3 6.4
7 189.3 169.3 7
8 184.6 178.4 168.6 161.3 151.1 135.3 8
9 166.0 160.2 154.1 146.1 138.5 131.7 118.7 103.1 95.6 88.9 9
10 161.2 156.5 152.3 145.7 139.9 134.5 127.6 120.2 111.8 101.7 95.6 88.9 83.5 78.3 10
12 136.7 136.7 134.7 132.8 127.3 124.0 119.6 113.5 108.4 103.5 97.8 91.8 87.5 83.3 79.3 75.4 12
14 115.5 115.5 115.0 112.8 110.3 106.2 102.8 99.0 94.1 89.0 84.1 81.3 79.4 77.1 75.0 71.7 14
16 99.5 99.5 99.1 98.2 95.6 93.5 89.6 86.2 82.8 78.9 73.9 71.3 69.5 67.5 65.9 63.9 16
18 85.8 86.0 85.9 85.8 84.2 82.3 79.9 76.4 73.0 69.6 66.1 64.1 62.3 60.2 58.7 56.8 18
20 74.2 74.5 74.4 74.3 73.8 73.2 71.3 68.8 65.4 61.8 59.1 57.4 56.3 54.5 53.3 51.4 20
22 65.4 65.3 65.3 64.8 64.4 63.8 62.0 59.5 55.8 53.2 51.6 50.6 49.1 48.0 46.7 22
24 58.0 58.0 58.0 57.5 57.1 56.5 56.0 54.0 51.0 48.6 46.8 45.8 44.4 43.4 42.2 24
26 51.9 52.0 51.5 51.1 50.5 50.0 49.3 46.6 44.8 43.0 41.8 40.6 39.5 38.4 26
32 38.9 38.6 38.2 37.6 37.0 36.4 35.8 35.0 33.5 32.8 31.9 31.0 30.1 32
38 30.0 29.7 29.1 28.6 27.9 27.3 26.6 25.9 25.5 24.8 24.2 23.6 38
44 23.6 23.1 22.6 21.9 21.3 20.5 19.9 19.6 19.2 18.9 18.3 44
50 18.5 18.1 17.4 16.8 16.1 15.4 15.1 14.7 14.4 14.0 50
55 15.1 14.5 13.9 13.1 12.6 12.2 11.7 11.5 11.0 55
60 12.1 11.5 10.8 10.2 9.8 9.3 8.9 8.3 60
65 9.4 8.7 7.9 7.5 6.9 6.6 6.1 65
70 6.7 5.9 5.5 4.9 4.6 4.1 70
75 4.1 3.7 3.2 2.9 2.3 75
80 2.1 80
TLT 10525129 M00000 Preliminary 5

Above lift chart is for reference only.

For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 13
 Working range – luffing jib (No. 2316.xx) 78° – 15°
Main boom 88° – 45°

°
560 76°78
170 73°
70°

160 °
520 60

3m
150 ° 11 0 m
480 50 11 7 m
10 4 m
10 1 m
140 10 8 m
9
440
130
°
40

400
9 5m

120
89 2 m
9

8 m
8 6m
80 3 m
7 m

360 110
7 7m
71 4 m
°
30

6 m
6 8m
62 5 m

100
5 m
5 9m

320
53 6 m
5 m
4 0m

90
44 7 m
4 m
3 1m

280
35 8 m
15°

3 m
2 2m

80
26 9 m
2 m
20 3 m

240
m

70

200 60 83° 88°

75°
65°

160 50
m
56 m
53 m
°
45

40 50 m
47 m
120 44 m
41 m
30 38 m
35 m
32 m
80 29 m
26 m
20 23 m
20
40
10

0 0
110 100 90 80 70 60 50 40 30 20 10 0m

360 320 280 240 200 160 120 80 40 0 ft

Boom configuration for main boom lengths (20 m – 68 m) – see table on page 12
Jib configuration for jib lengths (20 m – 113 m)
Length Amount of luffing jib extensions
Luffing jib foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 3m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 6m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7
Luffing jib head 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Luffing jib length (m) 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83 86 89 92 95 98 101 104 107 110 113

14 LR 1300 sx
 Lift chart – luffing jib (No. 2316.xx)
Main boom angle 88°

Main boom 20 m Main boom 32 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 110 Radius 20 41 56 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
12.4 80.5 11 117.0
15 65.0 57.6 13 108.8 76.1
17 58.3 52.8 52.3 16 82.6 71.2 49.9
18 53.1 48.5 47.3 40.4 18 68.6 63.2 48.8 37.2
20 45.1 41.2 39.8 37.6 28.6 22 49.0 46.4 42.3 34.9 26.8
22 39.4 35.2 34.2 33.7 28.1 24 40.4 39.0 33.2 25.8 18.3
24 31.4 30.1 29.0 26.3 19.1 26 36.1 35.1 31.7 25.1 17.8 13.0
26 28.4 26.8 25.6 24.5 18.4 13.7 28 32.5 31.5 30.3 24.4 17.3 12.8 9.3
28 25.9 24.2 23.1 21.9 17.9 13.4 10.5 32 27.4 26.3 25.2 23.6 16.5 12.2 9.0
32 22.0 20.4 19.0 18.1 15.6 12.7 9.9 36 23.5 22.3 21.6 20.2 15.9 11.6 8.5
36 18.8 17.6 16.1 15.0 14.0 11.4 9.2 42 19.4 18.2 17.2 16.6 13.8 10.9 7.8
42 15.4 14.2 12.7 11.8 10.3 9.4 8.4 55 12.3 11.3 10.6 9.2 8.6 6.8
50 11.0 9.8 8.5 7.3 6.2 5.5 65 8.5 7.5 6.3 5.4 4.5
60 7.2 6.0 4.7 3.7 2.9 75 5.4 4.2 3.2 2.3
65 6.1 5.1 3.8 2.7 80 3.4 2.3
75 3.5 2.3 85 2.6

Main boom 41 m Main boom 56 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 113 Radius 20 41 53 65 77 92 101 113
(m) t t t t t t t t (m) t t t t t t t t
8.8 117.0 9.3 101.3
14 96.2 69.4 14 83.1 57.6
16 78.4 67.1 50.5 17 65.5 55.4 43.1
19 60.3 57.0 48.1 35.5 19 56.1 49.4 42.0 31.5
22 47.6 45.0 41.7 33.6 25.4 22 45.2 40.6 37.3 30.4 22.6
24 39.3 38.1 32.1 24.5 17.6 24 39.3 35.6 34.0 29.3 22.2
26 35.2 33.8 30.5 23.8 17.2 12.6 26 32.1 30.6 27.5 21.6 14.5
28 31.8 30.3 29.4 23.2 16.8 12.5 28 29.2 27.7 26.2 21.1 14.2 11.5
30 29.2 27.7 26.7 22.7 16.5 12.2 8.9 30 26.8 25.4 24.3 20.5 13.9 11.2 8.1
38 21.7 20.3 19.4 18.0 14.9 11.1 8.0 38 20.1 18.8 17.9 16.5 12.9 10.3 7.4
44 15.1 16.6 15.7 14.7 12.7 10.2 7.4 44 16.8 15.5 14.5 13.5 11.0 9.4 6.9
55 12.1 11.1 10.2 8.9 8.1 6.3 55 11.4 10.3 9.4 7.9 7.2 5.4
65 8.3 7.3 6.2 5.2 4.3 65 7.8 6.7 5.4 4.6 3.8
75 5.3 4.1 3.1 2.2 70 5.8 4.4 3.6 2.7
80 3.3 2.3 75 4.9 3.5 2.8
85 2.6 85 2.1

Main boom 59 m Main boom 65 m Main boom 68 m

Jib length in (m) Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 104 Radius 20 41 53 Radius 38
(m) t t t t t t t t (m) t t t (m) t
9.4 94.8 9.6 84.8 13.4 52.0
14 79.3 55.6 14 73.6 50.7 14 52.0
17 63.1 53.7 41.8 17 60.7 48.7 37.8 16 49.7
19 54.1 48.3 40.7 30.6 19 52.8 44.7 36.8 18 46.5
22 43.5 40.2 36.4 29.7 22.2 20 49.0 43.3 36.2 20 42.6
24 38.0 35.4 33.3 28.7 21.8 15.5 22 43.0 38.0 33.6 22 36.8
28 29.0 27.3 25.6 20.7 15.1 11.2 10.4 24 37.9 33.5 31.0 24 32.8
30 26.7 25.1 23.9 20.2 14.9 11.0 10.3 26 30.3 28.3 26 29.7
32 24.8 23.2 21.9 19.7 14.6 10.9 10.2 30 25.4 23.6 28 27.1
36 21.4 19.9 18.9 17.5 14.0 10.5 9.9 34 21.9 20.2 30 25.3
40 19.0 17.5 16.4 15.1 12.8 10.0 9.4 38 19.2 17.5 32 23.4
44 16.8 15.3 14.3 13.3 11.2 9.3 8.9 40 18.1 16.5 34 21.7
55 11.3 10.2 9.3 7.8 7.0 6.7 42 17.1 15.4 36 20.2
65 7.8 6.6 5.4 4.4 4.2 44 16.1 14.5 38 19.1
75 4.8 3.6 2.7 2.5 55 10.6 40 18.0
85 2.2 65 42 15.1
TLT 10525129 M00000 Preliminary 7

Capacities in metric tons with luffing jib (No. 2316.xx) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 15
 Lift chart – luffing jib (No. 2316.xx)
Main boom angle 83°

Main boom 20 m Main boom 32 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 110 Radius 20 41 53 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
11.5 117.0 13 108.7
18 64.6 61.6 20 73.0 64.8
22 45.3 43.5 44.6 24 55.5 54.0 47.3
24 39.0 37.0 37.9 26 47.2 50.0 45.3
26 32.9 32.8 33.7 28 45.6 43.1 32.9
30 26.5 26.0 26.4 25.1 30 41.1 40.3 32.1 24.6
32 24.4 23.7 23.4 23.4 17.2 34 34.4 35.2 30.2 23.8 16.7
36 20.9 19.7 19.3 19.2 16.5 12.2 38 28.5 29.5 28.4 22.7 16.1 11.8
38 19.5 18.3 17.7 17.3 15.9 12.1 9.1 42 24.3 25.2 24.8 21.6 15.4 11.3 8.1
42 17.0 15.9 14.9 14.4 13.6 11.5 8.9 46 20.8 21.4 21.7 20.1 14.7 10.8 7.7
44 15.8 14.8 13.7 13.2 12.2 11.3 8.6 55 15.5 15.7 16.0 13.0 10.0 7.0
55 10.4 9.5 8.5 7.3 6.7 5.9 65 11.1 11.1 10.9 8.9 6.2
65 6.9 5.9 4.8 3.8 3.3 80 6.2 5.7 5.4 4.4
70 5.0 3.8 2.8 2.1 85 4.6 4.0 3.0
75 4.1 3.0 2.1 90 3.4 2.9
80 2.3 95 2.2

Main boom 41 m Main boom 56 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 113 Radius 20 41 53 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
14 93.4 15.9 75.6
22 61.7 56.5 22 56.8 47.9
24 55.9 51.8 44.8 26 48.4 42.4 38.1
26 49.9 47.2 43.3 28 44.4 38.9 36.3
28 44.0 40.9 31.9 30 36.4 33.8 28.8
32 37.5 35.5 30.7 23.3 34 31.8 29.6 27.0 20.9
36 32.1 31.0 28.2 22.5 16.1 38 27.9 26.4 24.2 20.3 14.8
38 29.4 28.8 27.1 22.0 15.8 11.4 40 25.9 24.9 23.0 19.8 14.6 10.5
42 25.0 25.3 24.4 20.8 15.2 11.1 7.7 44 22.9 22.5 20.8 18.3 14.0 10.2 7.2
46 21.8 21.6 21.5 19.7 14.5 10.7 7.5 46 21.4 20.9 19.7 17.7 13.6 10.0 7.1
55 15.8 16.0 15.9 12.9 9.7 6.8 48 19.9 19.5 18.7 17.1 13.2 9.9 7.0
70 9.6 9.4 9.1 8.2 5.5 60 13.1 13.1 12.8 10.8 8.6 6.1
80 6.6 5.9 5.6 4.6 70 9.7 9.1 8.4 7.3 5.2
85 4.8 4.2 3.2 80 6.6 5.7 5.3 4.2
90 3.7 3.2 90 3.7 3.1 2.2
95 2.4 95 2.8 2.4

Main boom 59 m Main boom 65 m Main boom 68 m

Jib length in (m) Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 104 Radius 20 41 53 Radius 38
(m) t t t t t t t t (m) t t t (m) t
16.2 71.7 17 63.3 22.6 42.5
24 50.9 44.7 24 48.0 41.7 24 41.6
26 47.0 41.5 36.7 26 44.5 39.0 26 38.6
28 43.4 38.2 35.5 28 41.7 36.2 33.0 28 35.7
30 35.7 33.0 28.2 30 38.7 33.7 31.0 30 33.6
34 31.2 28.9 26.4 20.6 32 31.6 29.0 32 31.2
38 27.6 25.8 23.6 20.0 14.3 34 29.5 27.1 34 29.2
40 25.8 24.3 22.4 19.5 14.2 10.3 36 27.8 25.6 36 27.6
42 24.1 23.1 21.4 18.7 14.0 10.3 9.6 38 26.3 24.2 38 26.0
44 22.7 22.1 20.3 17.9 13.7 10.2 9.6 40 24.7 22.8 40 24.5
46 21.3 20.6 19.2 17.2 13.3 10.0 9.4 42 23.2 21.6 42 23.3
48 19.8 19.3 18.3 16.6 12.9 9.8 9.2 44 22.0 20.7 44 21.9
60 13.2 12.9 12.5 10.4 8.5 8.0 46 20.7 19.5 46 20.4
70 9.6 9.1 8.2 7.0 6.6 48 19.3 18.3 48 15.1
80 6.6 5.6 5.1 5.1 50 18.0 17.1
95 2.7 2.3 2.2 60 12.7
TLT 10525129 M00000 Preliminary 7

Capacities in metric tons with luffing jib (No. 2316.xx) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

16 LR 1300 sx
 Lift chart – luffing jib (No. 2316.xx)
Main boom angle 75°

Main boom 20 m Main boom 32 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 110 Radius 20 41 53 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
18 85.3 20 70.1
26 43.1 44.7 30 45.6 43.0
32 30.2 32.0 34 37.6 34.5
36 25.1 25.3 24.9 40 31.0 30.0 27.3
42 19.9 19.1 19.4 18.8 44 27.5 26.7 24.9 20.7
44 18.5 17.8 17.7 18.0 50 23.4 22.7 21.6 19.9 14.7
46 17.1 16.5 16.2 16.3 14.0 55 20.0 19.2 17.9 14.1 10.0
48 15.1 15.4 14.9 15.1 13.9 60 17.7 17.0 16.1 13.3 9.8 6.7
50 14.5 13.9 14.1 13.0 65 15.1 14.3 12.2 9.4 6.5
55 12.3 11.6 11.1 11.2 9.8 7.5 70 13.5 12.8 11.4 9.0 6.2
60 9.8 9.2 8.6 8.4 7.2 80 10.0 9.0 7.9 5.5
65 8.4 7.6 6.7 6.6 6.3 85 8.8 7.8 6.8 5.0
70 6.8 6.4 5.4 4.8 4.7 90 6.8 5.8 3.4
75 5.3 4.2 3.6 3.2 95 5.8 4.9
80 4.2 3.2 2.5 2.1 100 4.0
85 2.5 105 3.3

Main boom 41 m Main boom 56 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 113 Radius 20 41 53 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
22.3 58.6 26.2 44.7
32 40.9 37.4 36 32.4 28.7
38 31.2 29.2 42 24.4 22.5
40 29.8 27.6 44 23.5 21.5
42 28.1 26.3 23.7 46 22.4 20.6 18.3
48 23.7 22.7 21.0 18.7 50 20.4 18.6 16.9
50 22.5 21.7 19.9 18.1 55 18.2 16.7 15.1 13.4
55 19.1 17.9 16.2 13.7 60 15.1 13.8 12.0 10.0
60 17.0 16.1 14.4 12.4 9.7 65 13.7 12.3 10.8 9.0 7.6
65 14.8 14.4 13.1 11.2 9.3 6.4 70 11.0 9.8 8.0 6.7 5.3
70 12.9 11.8 10.2 8.6 6.1 75 9.7 8.6 7.3 5.9 4.5
75 11.4 10.4 9.2 7.8 5.8 80 8.5 7.5 6.3 5.2 3.7
85 8.0 7.0 5.9 4.8 85 6.4 5.3 4.2 3.1
90 6.0 4.9 3.9 90 5.5 4.4 3.3 2.2
95 5.1 4.1 2.5 95 3.7 2.6
105 2.6 100 2.9

Main boom 59 m Main boom 65 m Main boom 68 m

Jib length in (m) Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 104 Radius 20 41 53 Radius 38
(m) t t t t t t t t (m) t t t (m) t
28 40.7 28.5 36.8 36.9 24.4
36 31.7 27.3 30 35.4 38 24.2
42 23.6 21.6 32 33.4 40 22.8
46 21.7 19.9 17.3 34 31.6 42 21.6
48 20.7 18.9 17.1 36 30.0 44 20.6
50 19.8 18.0 16.3 38 28.6 24.3 46 19.7
55 17.9 16.2 14.6 12.8 40 23.2 48 18.9
60 14.7 13.2 11.5 9.5 42 22.0 50 18.1
65 13.2 11.9 10.3 8.4 7.1 6.6 44 20.9 19.0 55 16.5
70 10.6 9.3 7.5 6.3 6.0 46 20.0 18.1
75 9.3 8.2 6.8 5.5 5.2 48 19.1 17.4
80 8.1 7.1 6.0 4.8 4.5 50 18.3 16.6
85 6.1 5.0 3.8 3.6 55 16.7 14.9
90 5.2 4.1 3.0 2.8 60 13.4
95 3.3 2.3 2.1 65 12.3
100 2.6 70 10.9
TLT 10525129 M00000 Preliminary 7

Capacities in metric tons with luffing jib (No. 2316.xx) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 17
 Lift chart – luffing jib (No. 2316.xx)
Main boom angle 65°

Main boom 20 m Main boom 32 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 101 110 Radius 20 41 53 65 77 89 101 113
(m) t t t t t t t t (m) t t t t t t t t
24 59.9 30 42.9
30 37.9 36 15.1
36 28.7 42 26.9
42 20.4 20.4 48 22.7 21.8
48 16.0 16.0 55 19.0 18.2 17.3
50 14.8 14.7 15.1 65 14.4 13.6 12.7
55 12.0 12.0 70 12.1 11.1 10.0
60 10.1 9.8 9.8 75 10.8 9.7 8.6 7.4
65 8.1 8.0 7.2 85 7.4 6.4 5.3 4.1
70 6.8 6.3 5.8 4.8 90 6.4 5.4 4.3 3.2
75 5.0 4.5 4.1 3.1 95 4.5 3.5 2.4
80 4.0 3.3 3.0 2.6 100 3.7 2.7
85 3.0 2.3 2.0 105 2.0

Main boom 41 m Main boom 56 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 74 89 101 Radius 20 41 53 65 77 89
(m) t t t t t t t (m) t t t t t t
34 34.7 38.3 25.3
38 30.2 44 21.9
44 23.1 46 15.1
55 17.6 16.7 55 14.7
60 15.1 14.8 13.8 60 12.9 11.6
65 13.2 12.2 11.4 65 11.3 10.1 8.9
70 11.8 10.7 9.9 70 8.8 7.6
75 9.4 8.6 7.0 75 7.7 6.5 5.3
80 8.2 7.5 6.0 4.8 80 5.6 4.3 3.1
90 5.5 4.1 3.0 85 4.7 3.5 2.3
95 3.3 2.2 90 2.8
100 2.6 95 2.1

Main boom 59 m Main boom 65 m Main boom 68 m

Jib length in (m) Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 Radius 20 41 53 Radius 38
(m) t t t t t t (m) t t t (m) t
39.6 23.4 42.1 19.8 53.7 12.1
44 21.2 44 19.3 55 11.7
46 20.0 46 18.4 60 10.3
55 13.9 48 17.5 65 8.9
60 12.2 10.9 50 15.1
65 10.6 9.5 55 12.2
70 8.2 7.0 60 10.7
75 7.1 5.9 4.7 65 9.3 8.0
80 5.0 3.8 2.5 70 8.1 6.9
85 4.1 3.0 75 5.9
90 3.4 2.2 80 5.0
TLT 10525129 M00000 Preliminary 7

Capacities in metric tons with luffing jib (No. 2316.xx) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

18 LR 1300 sx
 Lift chart – luffing jib (No. 2316.xx)
Main boom angle 45°

Main boom 20 m Main boom 32 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 77 89 Radius 20 41 53 65 77
(m) t t t t t t (m) t t t t t
33.4 30.1 41.9 25.0
34 36.6 44 23.5
36 34.0 60 14.3
55 16.4 65 12.7
65 11.6 70 10.5
75 8.1 75 9.2
80 5.9 80 7.0
85 5.3 85 6.0
90 4.1 3.5 90 4.0
95 2.9 100 2.6

Main boom 41 m Main boom 56 m

Jib length in (m) Jib length in (m)
Radius 20 41 53 65 Radius 20 41
(m) t t t t (m) t t
48.3 18.4 58.9 9.5
50 17.6 60 9.3
70 9.2 80 3.0
80 6.0
90 3.2
95 2.5

Main boom 59 m Main boom 65 m

Jib length in (m) Jib length in (m)
Radius 20 41 Radius 20
(m) t t (m) t
61 7.9 65.3 4.8
80 2.1
TLT 10525129 M00000 Preliminary 7

Capacities in metric tons with luffing jib (No. 2316.xx) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 19
 Working range main boom 88° – 30°
Fixed jib (No.0906.21) offset 30°

ft m
340 104

100
320
96

300 92

88
88°
280 80°
84
70°
260 80

°
76 60
240
72
m
83 m
220
68
5 0° 80 m
64 77 m
200 74 m
60 71 m
°

68 m
40

56
180 65 m
52 62 m
160 59 m
48
56 m
°

53 m
30

44
140 50 m
40 47 m
120 44 m
36
41 m
32 38 m
100 35 m
28 32 m
80 24 29 m
26 m
20 23 m
60 20
16

40 12

8
20
4

0 0
88 84 80 76 72 68 64 60 56 52 48 44 40 36 32 28 24 20 16 12 8 4 0m

280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 ft

Main boom configuration ( No. 2821.xx)

Configuration for boom lengths between 20 m and 83 m
Length Amount of boom extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1 1 1 1 1 1
Boom insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5
Boom head 7m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom length (m) 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 74 77 80 83

20 LR 1300 sx
 Lift chart - fixed jib 7 m (No. 0906.21) offset 30°
124 t counterweight and 57 t carbody counterweight

Main boom 20 m Main boom 26 m Main boom 32 m Main boom 38 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
14 61.6 13 67.6 11 74.5 10 78.1
15 59.6 14 65.0 12 71.6 12 73.7
16 57.4 15 62.9 14 67.9 14 69.5
17 55.5 16 61.1 16 63.9 16 66.5
18 54.2 17 59.5 18 60.8 18 63.1
19 52.9 18 57.8 20 58.0 20 60.5
20 51.6 19 56.2 22 55.5 22 58.0
22 49.2 20 54.9 24 53.6 24 55.4
24 47.8 22 52.9 26 51.3 26 52.4
26 46.9 24 50.8 28 47.8 28 47.3
26 49.0 30 43.5 30 42.9
28 47.5 32 39.7 34 35.9
30 43.7 34 36.4 38 30.4
32 39.8 36 33.5 42 26.1

Main boom 44 m Main boom 50 m Main boom 56 m Main boom 62 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
9 81.4 9 81.9 8.3 82.6 8,5 82.1
10 79.2 10 79.8 10 80.2 10 80.6
12 74.9 12 75.8 12 76.6 12 77.3
14 71.2 14 72.9 14 73.7 14 74.2
16 68.1 16 69.5 16 70.8 16 71.7
18 65.3 20 62.9 20 65.7 20 65.2
20 62.5 24 55.9 24 54.9 28 44.6
24 57.1 28 46.3 28 45.8 32 37.0
28 46.9 32 38.1 32 37.6 36 30.8
32 38.7 36 32.0 36 31.4 40 26.0
36 32.6 40 27.2 40 26.7 44 22.1
40 27.8 44 23.3 44 22.8 48 18.9
44 23.9 48 20.1 48 19.6 55 14.4
48 20.6 50 18.6 55 15.1 60 11.9

Main boom 68 m Main boom 74 m Main boom 80 m Main boom 83 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
8,7 81.5 8,9 80.9 9,1 79.4 9,2 77.7
10 80.9 10 80.9 10 79.4 10 77.7
12 78.1 12 77.8 12 77.3 12 75.2
14 74.8 14 75.1 14 74.8 14 72.0
16 72.8 16 72.8 16 71.7 16 68.4
20 62.4 20 62.1 20 60.0 20 58.9
28 43.0 28 41.4 28 39.9 28 39.1
32 36.1 36 29.3 36 28.2 36 27.4
36 30.2 40 24.7 40 23.9 40 23.3
40 25.5 44 20.9 44 20.3 44 19.8
44 21.5 48 17.6 48 17.0 48 16.7
48 18.3 55 13.2 55 12.5 55 12.2
55 13.9 65 8.2 65 7.4 65 7.0
65 9.1 70 6.1 75 3.5 75 3.1
TLT 10525129 M00000 Preliminary 5

Capacities in metric tons with fixed jib (No. 1507.20) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 21
 Working range main boom 88° – 30°
Fixed jib (No. 1507.20) offset 30°

ft m
340 104

100
320
96

300 92

88 88°
280 80°
84
70°
260 80

°
76 60
240
72
m
° 83 m
68
220 50 80 m
64 77 m
200 74 m
60 71 m
°

68 m
40

56
180 65 m
52 62 m
160 59 m
48
56 m
°

53 m
30

44
140 50
40
120 36

32
100
28

80 24

20
60
16

40 12

8
20
4

0 0
88 84 80 76 72 68 64 60 56 52 48 44 40 36 32 28 24 20 16 12 8 4 0m

280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 ft

Main boom configuration ( No. 2821.xx)

Configuration for boom lengths between 20 m and 83 m
Length Amount of boom extensions
Boom foot 10 m 1 1 1 1 1 1 1 1 1 1 1 1
Boom insert 3m 1 1 1 1 1 1
Boom insert 6m 1 1 1 1 1 1
Boom insert 12 m 2 3 3 3 3 4 4 4 4 5 5 5
Boom head 7m 1 1 1 1 1 1 1 1 1 1 1 1
Boom length (m) 50 53 56 59 62 65 68 71 74 77 80 83

22 LR 1300 sx
 Lift chart - fixed jib 8 m (No. 1507.20) offset 30°
124 t counterweight and 57 t carbody counterweight

Main boom 50 m Main boom 53 m Main boom 56 m Main boom 59 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
8 117.0 8.1 117.0 8.2 117.0 8.3 117.0
10 117.0 10 117.0 10 117.0 10 117.0
12 110.9 12 110.2 12 110.6 12 111.9
14 103.6 14 102.5 14 99.9 14 97.5
16 89.1 16 88.8 16 87.2 16 85.7
20 70.4 20 69.3 20 68.1 20 66.9
24 56.9 24 56.0 24 55.0 28 44.7
28 45.9 28 45.7 28 45.4 32 36.9
32 37.7 32 37.5 32 37.2 36 30.7
36 31.5 36 31.3 36 31.0 40 25.9
40 26.8 40 26.6 40 26.2 44 22.0
44 22.9 44 22.7 44 22.3 48 18.8
48 19.6 48 19.4 48 19.1 55 14.3
50 18.2 55 15.0 55 14.6 60 11.8

Main boom 62 m Main boom 65 m Main boom 68 m Main boom 71 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
8.5 117.0 8.6 117.0 8.7 103.7 8.8 97.8
10 115.2 10 109.3 10 103.3 10 97.8
12 108.2 12 103.7 12 97.8 12 92.4
14 95.2 14 92.0 14 88.8 14 85.4
16 84.2 16 82.7 16 81.3 16 79.1
20 65.7 20 64.7 20 63.5 20 62.4
28 43.8 28 43.1 28 42.3 28 41.5
32 36.5 32 36.2 32 35.4 36 29.3
36 30.3 36 30.1 36 29.7 40 24.5
40 25.6 40 25.3 40 24.9 44 20.7
44 21.6 44 21.4 44 21.0 48 17.5
48 18.4 48 18.2 48 17.8 55 13.0
55 13.9 55 13.7 55 13.3 65 8.0
60 11.4 65 8.9 65 8.4 70 5.8

Main boom 74 m Main boom 77 m Main boom 80 m Main boom 83 m

Radius (m) t Radius (m) t Radius (m) t Radius (m) t
8.9 91.8 9.0 86.8 9.2 81.9 9.3 76.9
10 91.8 10 86.8 10 81.9 10 76.9
12 87.0 12 82.7 12 78.5 12 74.3
14 81.5 14 78.4 14 74.8 14 71.1
16 75.9 16 73.8 16 70.8 16 67.5
20 61.3 20 60.3 20 59.2 20 58.2
28 40.7 28 39.9 28 39.1 28 38.4
36 28.6 36 28.1 36 27.4 36 26.7
40 24.2 40 23.8 40 23.2 40 22.5
44 20.3 44 20.1 44 19.6 44 19.0
48 17.1 48 16.8 48 16.4 48 16.1
55 12.6 55 12.3 55 11.9 55 11.5
65 7.4 65 7.1 65 6.6 65 6.2
75 3.5 75 3.2 75 2.7 75 2.3
TLT 10525129 M00000 Preliminary 5

Capacities in metric tons with fixed jib (No. 1507.20) 124 t counterweight + 57 t carbody counterweight. Above lift chart is for reference only.
For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

LR 1300 sx 23
 LR 1300 SX—10539843—03/2013 Subject to change without notice.

Liebherr-Werk Nenzing GmbH

P.O. Box 10, A-6710 Nenzing/Austria
Tel.: +43 50809 41–473
Fax: +43 50809 41–499
crawler.crane@liebherr.com
www.liebherr.com