BE46-122-03 J52 Switches
BE46-122-03 J52 Switches
BE46-122-03 J52 Switches
ED QUAL LESS
R T
ASSU ICE COS
V
S E R
9001 Series J52
ISO
® Refrigerant
Level Switches
FEATURES
* Temperatures from: -45°C to +40°C (-50°F to +100°F).
* Maximum working pressure to 20.5 bar (300 PSIG).
* Housing is completely sealed against entrance of mois-
ture, preventing internal frost formation.
* Conduit seal with 610 mm (24") lead wires prevents
entrance of moisture laden air into the switch housing.
* Float chamber is a welded assembly fabricated from two
low carbon steel sections.
* High and low level switch actuation is easily field
adjustable between 13 mm (0.50") and 38 mm (1.50"),
factory set for 38 mm (1.50").
* Vibration resistant switch mechanism has been specifi-
cally developed to provide reliable and troublefree opera-
tion.
* Housing cover seal of Viton A o-ring is used between
housing cover and base to provide an air tight seal.
* Housing base can be rotated 360°.
* Dry contact switch mechanisms available for -30°C
(-20°F) or for excessive vibration conditions.
* Baffle plate provided with the switch mechanism to pre-
vent electrical wiring interference.
* Choice of enclosure:
NEMA 4x, black steel cover
NEMA 4, transparant Lexan® cover
NEMA 4x/7/9, explosion proof.
* Used with most commercial refrigerants including
Ammonia, Freon, Methyl, Chloride and Sulphur Dioxide.
AGENCY APPROVALS
Agency Model No. Approval
J52-41X1-00X
CENELEC EEx d II C T6
J52-41X2-00X➀
J52-41X1-00X
CSA Non-hazardous NEMA 4X
J52-41X2-00X
J52-41XX-00X Non-hazardous NEMA 4X
FM Class I, Div. 1, Groups C & D
J52-41XX-00X
Class II, Div. 1, Groups E, F & G
➀
Chamber assembly must be fitted with a CENELEC
housing Lexan® is a registered trademark of General Electric
254
(10.00)
3/4" NPT or
3/4" Socket Weld
71
3/4" NPT or (2.81)
3/4" Socket Weld
108
(4.25)
THE QUALITY ASSURANCE SYSTEM IN PLACE AT MAGNETROL GUARANTEES THE HIGHEST LEVEL OF QUALITY DURING THE
DESIGN, THE CONSTRUCTION AND THE SERVICE OF CONTROLS.
OUR QUALITY ASSURANCE SYSTEM IS APPROVED AND CERTIFIED TO ISO 9001 AND OUR TOTAL COMPANY IS COMMITTED TO
PROVIDING FULL CUSTOMER SATISFACTION BOTH IN QUALITY PRODUCTS AND QUALITY SERVICE.
PRODUCT WARRANTY
ALL MAGNETROL MECHANICAL LEVEL CONTROLS ARE WARRANTED FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP FOR
5 FULL YEARS FROM THE DATE OF ORIGINAL FACTORY SHIPMENT.
IF RETURNED WITHIN THE WARRANTY PERIOD; AND, UPON FACTORY INSPECTION OF THE CONTROL, THE CAUSE OF THE CLAIM IS DETERMINED TO BE COV-
ERED UNDER THE WARRANTY; THEN, MAGNETROL INTERNATIONAL WILL REPAIR OR REPLACE THE CONTROL AT NO COST TO THE PURCHASER (OR OWNER)
OTHER THAN TRANSPORTATION.
MAGNETROL SHALL NOT BE LIABLE FOR MISAPPLICATION, LABOR CLAIMS, DIRECT OR CONSEQUENTIAL DAMAGE OR EXPENSE ARISING FROM THE INSTALLA-
TION OR USE OF THE EQUIPMENT. THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, EXCEPT, SPECIAL WRITTEN WARRANTIES COVERING SOME
MAGNETROL PRODUCTS.