Tulu Dimetu Sendary and Preparatory School

TULU DIMETU SENDARY AND PREPARATORY SCHOOL
WRITE ``TRUE`` IF THE STATEMENT IS CORRECT AND FALSE IF THE STATEMENT WRONG GIVEN
JUSTIICATION FOR YOUR ANSWER
1. An erasing shield restricts the erasing area so that the correctly drawn lines will not be
disturbed during the erasing procedure
2. Hidden lines are thin weight short dash lines
3. letters are classified as a straight line letters or curved –line letters
4. Artistic drawing is the art and science of describing structures and structural details
completely and accurately
5. Letters used to help our drawing informative and complete .
6. long break line is long and thin line. Used to show that middle section of an object has
been removed
7. letter used to help our drawing informative and complete
8. A regular polygon has equal length of sides and different interior angels
9. Point has its own width, height and depth.
10. letters not used to help our drawing informative and complete
11. drawing is needed to convey all the necessary information to the individual who will
fabricate and assemble the object be it a building, ship or aircraft
12. visible lines are dark heavy and solid lines.
13. Center lines are thin lines. It used to show the length, width, and height of the object.
14. Cylindrical break lines are long thin lines. It used to show the middle section of an
object has been removed.
15. The purpose of geometric construction is only to develop triangles and squares.
16. Lines can be defined as a moving point.
17. Construction lines are not necessary we can erase when the construction is completed.
18. Lines are commonly represented by intersection of two lines.
19. When two or more lines crossing each other are called intersecting lines.
20. In developing geometric construction it is important that drafting tools be in good
condition.
21. A straight line drawn from right to left.
CHOOSE THE CORRECT ANSWER FROM THE GIVEN FOUR ALTERNATIVE AND WRITE THE LETTER
OF YOUR CHOICE ON THE SPACE PROVIDED
1. Which types of line used to break the edge or surface of a part?
A. Phantom line B. Section line C. Short break line D. Long break line
2. Which one of the following scale expresses the enlargement of an object?
A. 1:1 B. 2:1 C. 1:2 D. none
3. A polygon having five side is called
A. Square B. Pentagon C. Heptagon D Hexagon
4. ---------are indicates the lower limit of the lower case letters
A. Cap line B. Drop line C. Waistline D. Base line
5. If two lines are equidistant throughout their length and will never met or cross are called
1 TECHNICAL DRAWING | WORK SHEET FOR GRADE 11| 2015

E.C PREPARED BY ALEMAYEHU . T
A. Rhombus B. Parallel line C. Intersection line D. Perpendicular line

6. --------are not the type of quadrilaterals poly gone
A. Square B. Pentagon C. Rectangle D. Trapezium
7. Which one of the following true about uniformity
A. Uniformity is the technique of lettering
B. Uniformity in height ,proportion ,lineation and strength of lines
C. Uniformity helps you keep your lettering vertical
D. None of the above
8. --------are have 8 unit wide and is widest letter in the alphabet
A. M B. O C. W D. T
9. -------- are thin lines used to indicate the starting and stoping point of the dimension
A. Center line B. Cutting line C. Extension line D. Dimension line
10. What is the path b/n two points (straight or curved) called?
A. Line B. plane C. point D. surface
11. which of the following line has a medium thickness?
A. hidden line B. center line C. cutting line D. short break line
12. which type of line used to break the edge or surface of a part ?
A. phantom line B. section line C. short break line D. long break line
13. which one of the following scale express the reduction of an object?
A.1:1 B.2:1 C.1:2 D .none
PART II. MATCH THE DEFINATION GIVEN IN COLUMAN ``A``WITH TERMS IN COLUMAN``B``
-------1. Used to conjunction with extension A. Masking tape
Line to indicate liner distance B. Object lines
------2. The line which show the visible part in a view C. Dimension
------3. Used to attach the drawing paper to the D. Hidden line
Drawing board E. Cutting plane line
-------4. Used to indicate edges, intersection, etc F. Center line
Those are behind other features of the part G. Parallel line
--------5.Are thin line composed of one long dash H. Short break line
And short dash
--------6. Used to show the location of cut for a section
View or the form which a view is taken

FILL IN THE BLANK SPACES
1) the 45 0 and the 300 -600 triangles can be combined to form angles in increments of ______?
2) if you are right -handed , you should draw from__________?
3) What is the fastest way to find the center of your drawing space _____?
4) The instrument best used for transferring distance on a drawing is _____?
5) _______ is an additional equipment used to achieve uniformity in drawing ?
6) An _______is made of thin metal .this equipment is used to protect nearby lines from being
erased ?
7) A______ is used to ink drawing onto the tracing paper ?
8) Curves can be constructed by adjusting lines on _______?
9) _______is made of flexible plastic material with lead backbone?
10) ______ are usually made of high quality transparent plastic . the edges of the squares contain
measurement scales
11) A_____ usually contains a drawing compass and a divider compass
12) ______ can be constructed by adjusting lines on a French curve
13) An equipment semi-circle in shape .it is used to measure angles.
14) The place where setting up a drawing paper
15) It used to stick the corners of the drawing papers to the drawing board.
16) What is the purpose of lettering in a drawing
17) Identify ascending and descending lowercase letters
18) What does the term stability refers to in lettering
19) What are the four guidelines of lowercase letters?
20) How do we maintain height and inclination uniformity of letters in a word


Tulu Dimetu Sendary and Preparatory School

Uploaded by

Copyright:

Available Formats

Tulu Dimetu Sendary and Preparatory School

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tulu Dimetu Sendary and Preparatory School

Uploaded by

Copyright:

Available Formats

TULU DIMETU SENDARY AND PREPARATORY SCHOOL

1 TECHNICAL DRAWING | WORK SHEET FOR GRADE 11| 2015

A. Rhombus B. Parallel line C. Intersection line D. Perpendicular line

-------1. Used to conjunction with extension A. Masking tape

Line to indicate liner distance B. Object lines

------3. Used to attach the drawing paper to the D. Hidden line

Drawing board E. Cutting plane line

-------4. Used to indicate edges, intersection, etc F. Center line

Those are behind other features of the part G. Parallel line

And short dash

--------6. Used to show the location of cut for a section

View or the form which a view is taken

2 TECHNICAL DRAWING | WORK SHEET FOR GRADE 11| 2015

FILL IN THE BLANK SPACES

3 TECHNICAL DRAWING | WORK SHEET FOR GRADE 11| 2015

You might also like