Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    Retro Reflective Sensor

    Uploaded by

    NiHAD OFFiCiAL
    The document summarizes the specifications of a retro-reflective photoelectric sensor. The sensor has a range of 4 meters, uses a pulsed red LED light source, and has a response time of less than 1 millisecond. It operates on a voltage supply of 10-30VDC and has a PNP transistor output. The sensor housing is 18mm in diameter, 67mm in height, and made of brass and plastic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Retro Reflective Sensor

    Uploaded by

    NiHAD OFFiCiAL
    36 views1 page
    The document summarizes the specifications of a retro-reflective photoelectric sensor. The sensor has a range of 4 meters, uses a pulsed red LED light source, and has a response time of less than 1 millisecond. It operates on a voltage supply of 10-30VDC and has a PNP transistor output. The sensor housing is 18mm in diameter, 67mm in height, and made of brass and plastic materials.

    Original Title

    Retro Reflective sensor

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the specifications of a retro-reflective photoelectric sensor. The sensor has a range of 4 meters, uses a pulsed red LED light source, and has a response time of less than 1 millisecond. It operates on a voltage supply of 10-30VDC and has a PNP transistor output. The sensor housing is 18mm in diameter, 67mm in height, and made of brass and plastic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    Retro Reflective Sensor

    Uploaded by

    NiHAD OFFiCiAL
    The document summarizes the specifications of a retro-reflective photoelectric sensor. The sensor has a range of 4 meters, uses a pulsed red LED light source, and has a response time of less than 1 millisecond. It operates on a voltage supply of 10-30VDC and has a PNP transistor output. The sensor housing is 18mm in diameter, 67mm in height, and made of brass and plastic materials.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Photoelectric sensors

    Retro-reflective sensors FPAM 18P3151/S14

    dimension drawing

    M18 x 1

    47

    67
    SW 24

    LED

    M12 x 1

    general data photo


    type retro-reflective sensor
    light source pulsed red LED
    actual range Sb 3,2 m
    nominal range Sn 4 m
    polarization filter yes
    alignment / soiled lens indicator flashing light indicator
    light indicator LED yellow
    sensitivity adjustment no
    wave length 660 nm
    suppression of reciprocal influence yes

    electrical data
    response time / release time < 1 ms
    voltage supply range +Vs 10 ... 30 VDC
    current consumption max. (no load) 35 mA connection diagram
    current consumption typ. 22 mA
    voltage drop Vd < 1,8 VDC
    BN (1)
    +VS
    output function dark operate WH (2) n.c.
    output circuit PNP BK (4)
    PNP output
    output current < 200 mA Z
    BU (3)
    0V
    short circuit protection yes
    reverse polarity protection yes

    mechanical data
    width / diameter 18 mm
    height / length 67 mm
    type cylindrical threaded
    housing material brass nickel plated / PC
    front (optics) PMMA
    connection types connector M12 4 pin

    ambient conditions
    operating temperature -25 ... +55 °C
    protection class IP 67

    FPAM 18P3151/S14 www.baumer.com 29/3/2017

    You might also like