0421 IMP Guide Specification Foam Roof Panel IBC 2018
0421 IMP Guide Specification Foam Roof Panel IBC 2018
0421 IMP Guide Specification Foam Roof Panel IBC 2018
SECTION 07 42 00
PART 1 - GENERAL
1.1 SECTION INCLUDES
A. Factory foamed-in-place or laminated insulated metal roof panels with standing seam side laps and related
trim and accessories.
1.2 RELATED REQUIREMENTS
A. Division 07 “Thermal Insulation” for insulation of roof assemblies
B. Division 07 “Roofing and Siding Panels” for insulated metal panels
C. Division 07 “Metal Roof and Wall Panels” for factory-formed metal roof panels
D. Division 07 Section "Sheet Metal Flashing and Trim" for flashings and trim
1.3 REFERENCES
Specifier: Referenced Standard year of edition has been omitted for ease of maintenance. Generally, the edition of
the referenced standards is that of Chapter 35 of the applicable version of IBC or IBC-based code, or latest version
of the specification if not within one calendar year of release.
A. American Society of Heating, Refrigeration, Air Conditioning and Refrigeration Engineers (ASHRAE)
1. ANSI/ASHRAE/IES Standard 90.1 – Energy Standard for Buildings Except Low-Rise Residential
Buildings (ASHRAE 90.1)
B. American Society of Testing Materials (ASTM)
1. ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process
2. ASTM A 755/A 755M - Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process
and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
3. ASTM A 792/A 792M - Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by
the Hot-Dip Process.