Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 115 views

    Method Statement For Installation and T - C of Split Units

    Uploaded by

    محمد بدر الدين العمامي
    The document provides guidelines for installing and testing split unit air conditioners. It outlines the tools, materials, and sequence of steps needed for proper installation, including preparing supports, mounting components, connecting refrigerant piping, and pressure testing. The testing and commissioning section details mechanical, electrical, and start-up checks to ensure correct operation, such as inspecting for damage, checking connections and fasteners, verifying fan rotation, measuring voltage and current, and recording performance data. Safety requirements are also listed, such as using experienced technicians, having guards in place, and wearing proper PPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Method Statement For Installation and T - C of Split Units

    Uploaded by

    محمد بدر الدين العمامي
    115 views4 pages
    The document provides guidelines for installing and testing split unit air conditioners. It outlines the tools, materials, and sequence of steps needed for proper installation, including preparing supports, mounting components, connecting refrigerant piping, and pressure testing. The testing and commissioning section details mechanical, electrical, and start-up checks to ensure correct operation, such as inspecting for damage, checking connections and fasteners, verifying fan rotation, measuring voltage and current, and recording performance data. Safety requirements are also listed, such as using experienced technicians, having guards in place, and wearing proper PPE.

    Original Title

    Method-Statement-for-Installation-and-T_C-of-Split-Units

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides guidelines for installing and testing split unit air conditioners. It outlines the tools, materials, and sequence of steps needed for proper installation, including preparing supports, mounting components, connecting refrigerant piping, and pressure testing. The testing and commissioning section details mechanical, electrical, and start-up checks to ensure correct operation, such as inspecting for damage, checking connections and fasteners, verifying fan rotation, measuring voltage and current, and recording performance data. Safety requirements are also listed, such as using experienced technicians, having guards in place, and wearing proper PPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    115 views4 pages

    Method Statement For Installation and T - C of Split Units

    Uploaded by

    محمد بدر الدين العمامي
    The document provides guidelines for installing and testing split unit air conditioners. It outlines the tools, materials, and sequence of steps needed for proper installation, including preparing supports, mounting components, connecting refrigerant piping, and pressure testing. The testing and commissioning section details mechanical, electrical, and start-up checks to ensure correct operation, such as inspecting for damage, checking connections and fasteners, verifying fan rotation, measuring voltage and current, and recording performance data. Safety requirements are also listed, such as using experienced technicians, having guards in place, and wearing proper PPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    HVAC MOS

    Method Statement for Installation of Air-Conditioning


    Split Unit
    You can follow below simple steps for installing the split units on any
    project. These are general guidelines and can be used to prepare professional
    method statements for approvals and pre-qualification purposes. Mostly other
    sections should be included in the documents i.e. scope, responsibility and
    other resources including the method of safe working in the form of risk
    assessment of job safety analysis etc.
    Before installation of split units make sure below tools are provided so that
    the work can be completed without interruption.
    1. Mechanical Tool Box
    2. Measuring Tape
    3. Marker
    4. Hack Saw Frame
    5. Drill Machine with concrete bits 6mm to 16 mm
    6. Anchor Bolts
    7. Cutting wheel
    8. Hammer
    Pre Requirements
     All the materials & equipment i.e. split units received at site will be
    inspected before accepting and any discrepancies or damages should be
    notified and reported to concerned authority for further action i.e.
    rejection or concession etc. Any materials found not complying the
    specification and suitable for site use will be removed from site
    immediately.
     Competent staff should be allowed to work on site and necessary
    training should be done before starting the work.
     Unloading and storage of split units shall be done carefully by using
    necessary manpower / shifting or lifting machinery / equipment to
    ensure that no damage is caused to the equipment.
    Installation Sequence of Split Units
     Prepare proper supports as per approved details and ensure split units
    are installed in level and plumb.
     Install evaporator-fan components using manufacturer’s standard
    mounting devices securely fastened to building structure.
     Install ground mounted, compressor condenser components on
    polyethylene mounting base.
     Install roof-mounted, compressor-condenser components on equipment
    supports specified in specifications.
     Install seismic restraints.

    Page 1|4
    HVAC MOS

     Install suspending compressor-condenser components on restrained,


    spring isolators with a minimum static deflection of 1 inch (25 mm) or
    asper approved material for a specific site.
     Install and connect pre-charged refrigerant tubing to component’s
    quick-connect fittings. Install tubing to allow access to unit.
     Make connections to the refrigerant piping as per drawings indicating
    general arrangement of piping, fittings, and specialties. Where piping is
    installed adjacent to unit, allow space for future service and
    maintenance of unit.
     In general if not indicated, connect piping with union and shutoff
    valves to allow units to be disconnected without draining piping.
     Perform a pressure test and get necessary approvals from authorities /
    parties.
    -----------------------------------------------------------------------------------------------------------------------------------------

    Method Statement for Testing & Commissioning


    of Split Units
    The purpose of this procedure is to define the step by step method to
    implement the correct practices for the pre-commissioning & commissioning
    of “Split Unit” through the guidelines contained herein so as to ensure that
    the job execution complies with the project requirements and serves the
    intended function to satisfactory level.
    Reference Documents
    1. Contract Specifications and Approved Shop Drawings
    2. Approved Material Submittals
    3. Manufacturer’s Instructions
    Tools / Equipment /Testing Instruments
    1. Digital Multimeter
    2. Clamp Meter
    3. Tachometer
    4. Anemometer
    5. Flow Hood Kit
    6. Digital Thermometer
    7. Psychorometer
    Quality Control
     In general, it shall be ensured by Site Engineer that product
    manufacturer’s recommendations are followed and shall be monitored
    by Project engineer.

    Page 2|4
    HVAC MOS

     The Project Engineer shall further oversee the Pre-commissioning and


    commissioning activity as per the approved method statement for Start-
    up and Commissioning of Split Units.
     The Split Units shall be tested under direct supervision of manufacturer
    / local dealer’s representatives.
    Split Unit Commissioning Procedure
    Mechanical Checks
     Carefully inspect the unit for any physical damages /dents.
     Check and ensure the shipping bolts / clamps are removed.
     Check tightness of all nuts / bolts, screws, fasteners, rubber vibration
    isolators etc. as applicable
     Check the piping connections as per approved drawings.
     Check the fan rotation freely by hand and the direction of rotations on
    initial start-up.
     Align the Unit in the direction of drain to maintain the gravity slope.
    Electrical Checks
     Ensure the connected cables have been tested and verify the test
    reports.
     Check all terminations are complete and tightened as required.
     Check the cabling / wiring including grounding is completed and
    dressed neatly for thermostat.
     Ensure all identification and labelling is completed.
     Check the isolator is fixed close to the Split Units for emergency power
    shut-down.
    Start Up and Test Preparation
     Check the line voltage before energizing the power
     Switch ON the power.
     Verify for the proper operation of the Split Units motor.
     Measure the current drawn (amperage) by Split Units and record the
    same.
     Verify proper operation of the thermostat, supply air temperature.
     Check for any abnormal noise and vibration on start-up. Rectify as / if
    required.
     After about an hour’s operation, check that all nuts /bolts, screws,
    clamps etc. are tight and secure for external units.
     Record the Split Unit/External Unit name plate data in the
    commissioning format.
     Record the ampere / voltage drawn by the compressor / fan of the
    outdoor unit.
     Record the refrigerant pressure of the outdoor unit.
     Ensure it is within the limits as per the ambient temperature.
     Ensure compliance to the manufacturer’s instruction as applicable.

    Page 3|4
    HVAC MOS

    Health & Safety Requirements


     All safety precautions shall be followed as per the established Project
    Safety Plan.
     Only experienced and skilled technicians shall be engaged for carrying
    out Start-up and Commissioning of Split Units.
     Safety Guards shall be in place and secured prior to start-up.
     Cable test reports shall be verified prior to energisation.
     Appropriate Warning signs and tapes shall be placed during start-up
    and commissioning as required.
     All PPE shall be worn as appropriate according to the nature of the job.
     Work area shall be maintained neat and clean.

    Page 4|4

    You might also like