FSD - Mobile Radio System

OPRNS SAUDI ARABIAN OIL COMPANY
WASIT GAS PROGRAM

PMT
CERT
TABLE OF CONTENTS
ZHK
ENG’G
RJV
1.0 GENERAL............................................................................................................... 4
1.1 Scope ...................................................................................................................... 4
1.2 Site and Ambient Conditions................................................................................... 5
1.3 Industry Codes and Standards................................................................................ 5
1.4 Related Drawings.................................................................................................... 5
DESCRIPTION
2.0 SYSTEM DESCRIPTION........................................................................................ 6

2.1 Operating Philosophy.............................................................................................. 6
2.2 System Architecture and Overview ......................................................................... 6
Issued for Bid
2.2.1 Base Station ............................................................................................................ 6

2.2.2 Switching and Control Node (SCN)......................................................................... 6
2.2.3 End Users and Talk-groups .................................................................................... 7
THIS DRAWING AND THE INFORMATION HEREIN ARE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF THE OWNER
2.2.4 Dispatcher Consoles ............................................................................................... 7
10-00914/302-0001
3.0 FUNCTIONAL REQUIREMENTS........................................................................... 8

JO/EWO NO.
3.1 Coverage and Interference Analysis ....................................................................... 8

3.2 Transmitter Noise and Desensitization Analysis..................................................... 9
3.3 Traffic Analysis........................................................................................................ 9
3.4 Operating Frequencies and Bandwidth................................................................... 9
3.5 Telephone Interconnects......................................................................................... 9
DATE
05/27/10
3.6 Network Management System .............................................................................. 10

3.7 Base Station Specifications................................................................................... 10
REV
NO.
3.7.1 Transceivers.......................................................................................................... 10
0
DRAWN
3.7.2 Base Station Controller ......................................................................................... 11
DATE 3.7.3 RF Distribution System ......................................................................................... 12
CHECKED 3.8 Dispatcher Console............................................................................................... 15
BY
DATE
3.9 Logging Recorder.................................................................................................. 16
3.10 Radio Specifications.............................................................................................. 16
3.10.1 Fixed Desktop Radios ........................................................................................... 17
DISCIPLINE
ENGINEER 3.10.2 Vehicle-Mounted Mobile Radios ........................................................................... 18
DATE
3.10.3 Hand-held Radios ................................................................................................. 19
3.11 System Monitoring ................................................................................................ 20
PROJECT
ENGINEER
4.0 INSTALLATION .................................................................................................... 20
DATE
4.1 General.................................................................................................................. 20
4.2 Safety and Security Requirement ......................................................................... 22
CERTIFIED 4.3 Material Included................................................................................................... 22
DATE 4.4 Plant Tagging ........................................................................................................ 23
5.0 INSPECTION AND TESTING............................................................................... 23
CONSTRUCTION
AGENCY 5.1 General.................................................................................................................. 23
DATE 5.2 QA/QC Requirements ........................................................................................... 24
5.3 Commissioning...................................................................................................... 25
OPERATIONS
5.4 Factory Acceptance Testing (FAT) ....................................................................... 25
DATE
WASIT GAS PROGRAM PLANT NO. INDEX DOCUMENT NO. SHT.NO. REV.NO.
THIS DOCUMENT IS
NOT TO BE USED All Program
FOR
CONSTRUCTION Q76 T PP-118324 2
0
UNTIL CERTIFIED of
AND DATED.
29
Wasit Gas Program SAUDI ARAMCO JO/EWO NO. 10-00914/302-0001
WASIT GAS PROGRAM
PMT
5.5 Field Testing.......................................................................................................... 26

5.6 Site Acceptance Testing ....................................................................................... 26
CERT
ZHK
5.7 Hardware Component Testing .............................................................................. 27

5.8 Software Verification Testing ................................................................................ 27
ENG’G
RJV
5.9 Mechanical Completion Certificate (MCC) ............................................................ 28

5.10 Performance Acceptance Testing (PAT) .............................................................. 28
6.0 DOCUMENTATION .............................................................................................. 28
6.1 Drawings ............................................................................................................... 29
6.2 System Drawings .................................................................................................. 29
DESCRIPTION
6.3 Rack Face Elevation (RFE) Drawings................................................................... 29

6.4 As-Built Drawings.................................................................................................. 29
6.5 Installation Drawings ............................................................................................. 29
6.6 Manuals................................................................................................................. 29
Issued for Bid
10-00914/302-0001
JO/EWO NO.
DATE
05/27/10
REV
NO.
DRAWN
DATE
CHECKED
BY
DATE
DISCIPLINE
ENGINEER
DATE
PROJECT
ENGINEER
DATE
CERTIFIED
DATE
CONSTRUCTION
AGENCY
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED.
29
WASIT GAS PROGRAM
PMT
1.0 GENERAL
CERT
ZHK
1.1 Scope
ENG’G
RJV
This Functional Specification Document (FSD) describes the requirements

for the provision of the Mobile Radio System for the Wasit Gas Plant
(WGP), under the Wasit Gas Project (BI-10-00914) and NGL Fractionation
Facilities (BI-10-00302).
DESCRIPTION
The Permanent Communications ‘Contractor’ shall design, supply, install,

test, and commission the Mobile Radio System that is based on TErrestrial
Trunked RAdio (TETRA) technology. The major system components shall
Issued for Bid
consist of the following and not limited to the following:

System Racks
Base Station controller and transceivers
10-00914/302-0001
JO/EWO NO.
RF distribution system (transmitter combiner, receiver multicoupler,

antenna panels, feeders and feeder line protection)
103 handheld radios: 61 for Operations, 20 for Fire, 20 for Security,
and 2 for Medical personnel
DATE
05/27/10
22 vehicle-mounted radios: 5 for Operations, 10 for Fire, 5 for Security,

and 2 for Medical personnel
REV
NO.
12 desktop radios: 6 for CCR consoles, 1 for DCC console, 1 for Fire
0
DRAWN
Station console, 1 for the Sulphur Loading Monitoring Building console,
DATE
1 for the Main Gatehouse, 1 for the Computer Gatehouse, and 1 for the
CHECKED
Sulphur Loading Area Gatehouse
BY
DATE
2 dispatcher console radios: 1 for the CCR, and 1 for the DCC
36 RF signal enhancers. Refer to Section 3.7.3.2 for a full list of
DISCIPLINE
ENGINEER buildings with signal enhancers
DATE
Ethernet LAN switches and media converters, as required
PROJECT
ENGINEER System will allow for interconnection to Saudi Aramco VoIP, PABX, or
DATE
PSTN exchange.
CERTIFIED
The base station will be open, scalable, and modular to accommodate
additional capacity requirements.
DATE
CONSTRUCTION
AGENCY
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
1.2 Site and Ambient Conditions

CERT
ZHK
The project specific ambient conditions shall be based climatic condition of

ENG’G
Khursaniyah as per SAES-A-112 Saudi Aramco metrological and seismic

RJV
data.
1.3 Industry Codes and Standards
The works should conform to the requirements of the latest issues and
DESCRIPTION
most recent revisions of the Saudi Aramco and International Standards

and Procedures listed below.
Issued for Bid
SAES-A-105 Noise Control

SAES-B-068 Electrical Area Classification
SAES-P-100 Basic Power System Design Criteria
SAES-P-103 UPS and DC System
SAES-P-104 Wiring Methods and Materials
10-00914/302-0001
JO/EWO NO.
SAES-P-111 Grounding
SAES-T-481 Powered in-plant Communications
SAES-T-492 VHF/UHF Land-Mobile and Fixed Radio
SAES-T-744 Installation of Communication Towers
SAES-T-795 Communications Facility Grounding System
DATE
05/27/10
SAEP-1634 Factory Acceptance Test

ANSI/NFPA-70 National Electrical Code
ETSI TETRA TErrestrial Trunked RAdio
REV
NO.
DRAWN ETSI 300392-2 Air Interface Standard

DATE EIA/TIA 222 Structural Standard for Antenna – Supporting
CHECKED Structures and Antennas
BY EIA/TIA 329-B Minimum Standards for Base Station Antennas
DATE
EIA/TIA 329-B-1 Minimum Standards for Vehicular Antennas
EIA/TIA 603 Land Mobile FM or PM Communications – Equipment
DISCIPLINE Measurement and Performance Standards
ENGINEER
ITU-T G Transmission Systems and Media, Digital Systems
DATE
and Networks
PROJECT
ENGINEER
1.4 Related Drawings
DATE
CERTIFIED
The following documents and drawings are referenced in this FSD and
form part of the specification.
DATE
CONSTRUCTION
AGENCY
Q76-T-PP-118327 Radio Tower Functional Specification
Q76-T-PP-118035 Mobile Radio System Block Diagram
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
2.0 SYSTEM DESCRIPTION

CERT
ZHK
2.1 Operating Philosophy

ENG’G
RJV
Radio System is to provide flexible and effective two-way mobile voice

communications between operations and support personnel around the
project facilities.
Mobile radio system shall be based on TETRA technology. This

DESCRIPTION
technology offers efficient use of spectrum operating in the 410-430 MHz

range on 25 kHz bandwidth channels. Radios are to inter-operate between
the trunked mode (normal mode of operation) and conventional mode to
provide users flexibility in movement outside coverage area or in the event
Issued for Bid
the system is down.
End users shall have the ability to dial into the Saudi Aramco telephone
system as well as accessing the public telephone network to make phone
10-00914/302-0001
JO/EWO NO.
calls using their radios.
System shall be compatible and shall interface with the existing Saudi
Aramco TETRA infrastructure per BI-10-00112. It shall follow the standard
practices of similar facilities. The Base Station at Wasit shall be connected
DATE
05/27/10
to the Ras Tanura Switching and Control Node (SCN).
2.2 System Architecture and Overview

REV
NO.
DRAWN
DATE
2.2.1 Base Station
CHECKED
The base station shall be capable to provide radio users within and around
BY
DATE the project facilities with required access to the TETRA network in Eastern
Province.
DISCIPLINE
ENGINEER Contractor shall provide the Base Station equipment and racks including
DATE Controller, Transceivers, RF Distribution System, and Ethernet LAN Switch
PROJECT
at the Administration Building Main Telecommunications Equipment Room
ENGINEER (MTER). Base Station Controller shall be switch based and IP-capable for
DATE the interface with Ras Tanura SCN and dispatcher consoles.
CERTIFIED
2.2.2 Switching and Control Node (SCN)
DATE
CONSTRUCTION
SCN provides vital network functions including digital switching, resource
AGENCY management, trunking, speech item allocation, signaling services, data
DATE services, statistics, call control functions, and interface to other Base
OPERATIONS
Station SCNs, dispatcher consoles, Network Management System
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
terminals, external conventional channels, logging recorders, and the

telephone network.
CERT
ZHK
The Base Station under the Wasit Project shall be interfaced to the TETRA
ENG’G
RJV
network being deployed by BI-10-00112 via the TETRA SCN in Ras

Tanura. Communications between the Wasit Base Station and Ras Tanura
SCN shall utilize the Backbone Fiber Optic, IP-based Corporate WAN
between the two facilities. The Base Station shall connect to the SCN in a
protected loop.
DESCRIPTION
2.2.3 End Users and Talk-groups
The entire fleet shall be divided into different talk-groups. Users assigned a
Issued for Bid
hand-held, vehicle-mounted, or a fixed desktop radio will belong to a Talk-

group. Users can communicate to any user of any group or to entire
groups at a time. Users will access the system via RF communications
with the Base Station. Indoor users in all PIBs, Substations, and manned
10-00914/302-0001
buildings will have the TETRA coverage via RF signal enhancers installed
JO/EWO NO.
on top of the respective buildings.
Contractor shall submit the Wasit Talk-group Plan for reservation to BI-10-
00112 to reserve.
DATE
05/27/10
Contractor shall provide the hand-held, vehicle-mounted, and fixed radios

per 1.1.
REV
NO.
DRAWN
2.2.4 Dispatcher Consoles
DATE
CHECKED
Dispatchers have access to advanced features and functions of the
BY
DATE trunked radio system. Dispatchers can manage fleets and maintain the
system. Operators will be able to assign, change, or delete user or group
aliases over the air.
DISCIPLINE
ENGINEER
DATE Radio System Contractor shall provide and install two switch-based, IP
capable Dispatcher Consoles. One Console shall be installed in the
PROJECT
ENGINEER Central Control Room (CCR). The other Console shall be installed in the
DATE Disaster Control Center (DCC) of the Administration Building.
Communications between the CCR and DCC shall utilize the Outside Plant
CERTIFIED
Fiber Optic, IP-based network between the two facilities.
DATE
CONSTRUCTION
AGENCY
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
3.0 FUNCTIONAL REQUIREMENTS

CERT
ZHK
3.1 Coverage and Interference Analysis

ENG’G
RJV
The contractor shall provide a detailed Radio Frequency (RF) coverage

study, frequency planning, interference analysis, and in-building and
outdoor coverage.
DESCRIPTION
Operational areas within and around the Wasit Gas Plant and key facilities
shall have radio coverage 95% of the time and 95% of locations. The
minimum received signal level required shall meet Mean Opinion Score
(MOS) of 3.5 as per Perceptual Evaluation of Speech Quality (PESQ)
Issued for Bid
measuring method specified by ITU-T standard P.862 within the plant

boundaries and surroundings areas.
Propagation analysis shall determine the required tower height, transmit
10-00914/302-0001
power, and RF distribution system parameters of the Base Station and

JO/EWO NO.
Radios. Contractor shall use the latest Mentum Planet software for the
propagation analysis. Contractor shall also supply the latest Mentum
Planet software, with a 30m digital terrain resolution (image, vector, clutter
files) for the kingdom wide area, to the Saudi Aramco Engineering
DATE
Department/WEG for study verification and recommendations. Preliminary

05/27/10
coverage analysis showed that a 30m tower is required to cover the Wasit
Gas Plant perimeter and surroundings. Contractor shall confirm this
REV
NO.
DRAWN
requirement during the detailed design phase of the project.
DATE
CHECKED
Contractor shall undertake co-channel, adjacent channel interference
BY
analysis. Contractor shall request from BI-10-00112 the coverage analysis
DATE and frequency plan of the Northern Area for the Contractor to consider in
the interference/coverage analysis.
DISCIPLINE
ENGINEER
As an option, Contractor may hire the same radio consultant used by BI-
DATE
10-00112 to conduct the coverage and interference analysis.
PROJECT
ENGINEER
A field analysis shall be conducted to verify the theoretical studies. At
DATE minimum, field analysis shall measure the Received Signal Strength
CERTIFIED
Indications (dBm) and the Voice Quality within the Wasit Gas Plant
Perimeter and the area up to the downstream pipeline to verify the tower
DATE
height requirements prior to system installation.
CONSTRUCTION
AGENCY
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
3.2 Transmitter Noise and Desensitization Analysis

CERT
ZHK
Contractor shall perform Transmitter Noise and Receiver Desensitization

ENG’G
analysis to confirm that the antenna system provides sufficient isolation

RJV
and will not cause transmitter and receiver performance degradation. If

any problems do arise, they shall be analyzed and solutions be provided.
3.3 Traffic Analysis

DESCRIPTION
Contractor shall perform the required analysis to derive the user profile
such as call types, duration, and call rates to incorporate the effect of
additional users and traffic channels. The following shall be identified:
Issued for Bid
The total traffic load the system can support with the available traffic
channels
The maximum number of users that can be served given the available
10-00914/302-0001
traffic channels.
JO/EWO NO.
If the required Grade of Service (GoS) could not be achieved, Contractor

shall highlight findings and provide recommendations to Saudi Aramco.
3.4 Operating Frequencies and Bandwidth

DATE
05/27/10
System shall operate in the UHF band in the 410-430 MHz range with 25
kHz channel bandwidth subject to local government authority’s final
REV
NO.
approval.
0
DRAWN
DATE
Contractor shall submit the Wasit frequency plan and requirements to BI-
CHECKED
10-00112 based on the Coverage/Interference Analysis.
BY
DATE
3.5 Telephone Interconnects
DISCIPLINE
ENGINEER System shall include optional feature for radio users providing capability of
DATE dialing into the Saudi Aramco Telephone System and PSTN telephone
network to make phone calls. A radio user with the proper authorization
PROJECT
ENGINEER may call a Saudi Aramco Telephone system extension or PSTN number
DATE via the site telephone system by dialing pre-assigned access codes.
Radio users are capable of receiving calls from any Telephone system
CERTIFIED
extension or PSTN telephone. Radio shall be able to display incoming and
DATE out-going phone numbers.
CONSTRUCTION
AGENCY Telephone network interface at Ras Tanura SCN will be provided under
DATE BI-10-00112. Contractor shall determine the number of users with access
OPERATIONS
to the PSTN via the TETRA network and submit a plan.
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
3.6 Network Management System

CERT
ZHK
Network Management System will be provided by BI-10-00112. System

architecture shall allow for channel reuse. A network operator at Ras
ENG’G
RJV
Tanura SCN shall be able to perform on the Wasit TETRA network the
following functions:
Define groups and sub groups
Control how the network works
DESCRIPTION
Diagnose network faults

Collect traffic information
Issued for Bid
3.7 Base Station Specifications
Base Station shall be designed according to the TETRA Standards.
Signaling over the air shall be compliant with ETSI 300392-2. System shall
10-00914/302-0001
be based on the EADS TETRA system or equivalent.

JO/EWO NO.
The Base Station shall be installed inside the MTER. All equipment will be
housed inside standard 19”/23” rack mountable cabinets. All Base Station
modules shall be equipped with front panel LED displays indicating their
operating status.
DATE
05/27/10
Base Station shall operate in:

REV
NO.
DRAWN Normal Trunked Mode where it is controlled by and reports to Ras

DATE Tanura SCN
CHECKED Fallback Mode where the Ras Tanura SCN loses link to the other
BY
DATE
SCNs. Radios will still operate in the trunked mode but cannot
communicate with other individuals and Base Stations of the other
SCNs. Radios shall display the Fallback Mode status to their users
DISCIPLINE
ENGINEER whenever the Base Station is in this mode
DATE Local Mode where a transceiver operates separately from the normal
PROJECT
traffic for maintenance purposes
ENGINEER
The Base station consists of the following main components:
DATE
CERTIFIED 3.7.1 Transceivers

DATE
The Base Station will have three transceiver cards with a 6-receiver
CONSTRUCTION
AGENCY
diversity enabled per carrier. The receiver diversity shall use cross-
DATE
polarization and/or omni directional antenna configurations that provide the
best coverage reception for uplink and downlink radio communications.
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
The transceiver shall have the following minimum features:

CERT
ZHK
Frequency Range: 410-430 MHz

Channel Spacing: 25 kHz
ENG’G
RJV
Channel Bandwidth: 25 kHz

Modulation: π/4 DQPSK
Input Power: -48 VDC
Transmit Power: Minimum of 25 W at antenna port
DESCRIPTION
Duty Cycle: 100%

Spurious Output: -60 dBC adjacent channel
Issued for Bid
-70 dBC second channel

Receiver Static Sensitivity: -115 dBm (4% BER) or better
Receiver Dynamic Sensitivity: -109 dBm (4% BER) or better
10-00914/302-0001
JO/EWO NO.
Temperature Range Operation: -20°C to +55°C

Storage: -30°C to +70°C
Relative Humidity: 10% to 95% at 50°C, non-condensing
DATE
05/27/10
3.7.2 Base Station Controller
A switch based, IP capable Base Station Controller is the heart of the

REV
NO.
DRAWN TETRA system at the Wasit Gas Plant. It controls the local radio traffic as
DATE well as all in-bound/outbound communications to other Base Stations.
CHECKED
BY The controller shall have the following minimum features:

DATE
High performance PC platform
DISCIPLINE Input Voltage: -48 VDC
ENGINEER
DATE Windows operating system

PROJECT Compact flash disk
ENGINEER
DATE
Ethernet 10/100 Mbit Interfaces, RJ 45 Connectors
CERTIFIED
Four E1 interfaces 75/120 ohm
DATE Operations and Maintenance interface via RS232 or TCP/IP
CONSTRUCTION Automatic switch over to a redundant Controller at failure
AGENCY
DATE
If during the time of construction, the SCN or the Controller is not yet IP
capable, the Contractor shall provide Ethernet to E1 converters to
OPERATIONS
interconnect the Wasit Gas Plant Base Station and Ras Tanura SCN.
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
3.7.3 RF Distribution System

CERT
ZHK
System final configuration shall be determined during detailed design and

after the propagation study to determine the equipment needed for area
ENG’G
RJV
coverage with minimum output RF power possible.
System shall consist of the following components:
3.7.3.1 Antenna System

DESCRIPTION
The antenna system includes, but not limited to, the following components:
Antennas
Issued for Bid
Transmission coaxial cables

Combiner/Multi-Coupler
10-00914/302-0001
The antenna system shall have the following minimum features:

JO/EWO NO.
Frequency Range: 410-430 MHz

Transmit Antenna: Omni directional
Receive Antenna: 3 high gain X polarized directional
DATE
05/27/10
panel and/or omni directional antennas

configuration for best coverage
REV
NO.
Gain: 8 dBd or as required

0
DRAWN
DATE
Max Power Input: 300 Watts
CHECKED VSWR: Less than 1.5:1 @ 50 ohms
BY
DATE Minimum Stand-Off: ¼ Wavelength
Lightning Protection: Direct ground protection to radio tower
DISCIPLINE
ENGINEER Connector Input: Type N-male connector on antenna
DATE base
PROJECT Polarization: Vertical
ENGINEER
DATE Rated Wind Velocity: 270 km/hr

CERTIFIED Environment: Suitable for high saline and dusty type
DATE Antenna Structure: EIA Standard RS-329
CONSTRUCTION
AGENCY
Mounting Hardware: Clams and hardware to adapt to
specific radio tower/pole
DATE
Transimission Lines Foam-dielectric, Coaxial
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Minimum 7/8” for < 100m length

CERT
ZHK
Minimum 1¼” for > 100 m length

Maximum loss of 1.76dB/100m at
ENG’G
RJV
400MHz
Maximum permissible twist and tilt angle for tower installed antennae will
be ± 0.5°. Ensure antennae mounting brackets comply with these
parameters.
DESCRIPTION
The combiner/multi-coupler shall have the following minimum features:

Resonant-cavity, expandable, auto-tune
Issued for Bid
Maximum Insertion Loss: 3.5 dB
Receiver multi-coupler with pre-selector filter, expandable
Adjacent channel separation: ≤ 180 kHz
10-00914/302-0001
JO/EWO NO.
3.7.3.2 RF Signal Enhancers

37 signal extenders shall be provided for all PIBs, Substations, and
manned buildings. System consists, but not limited to, the following
DATE
05/27/10
components:
Indoor antennas, ceiling mounted, as required
REV
NO.
DRAWN
Outdoor antennas mounted on a pole on top of the buildings
DATE
CHECKED
Transmission coaxial cables (Refer to Sec. 3.6.5.1)
BY Signal enhancer
DATE
Signal enhancer shall have the following minimum features:

DISCIPLINE
ENGINEER
Solid state
DATE Frequency: 410-430 MHz
PROJECT Frequency Stability: ±0.0002%
ENGINEER
DATE Input Power: -48 VDC

CERTIFIED Frequency Synthesized Transceivers
DATE Cabinet-mounted
CONSTRUCTION
AGENCY
Continuous Duty Operation
DATE Temperature Range: Operation: -20°C to +55°C
OPERATIONS Storage: -30°C to +70°C
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Relative Humidity: 10% to 95% at 50°C, non-condensing

CERT
ZHK
Below is a list of buildings requiring signal enhancers:

ENG’G
RJV
Building
# Building #
Wasit In-Plant Facilities:

DESCRIPTION
1 Central Control Building (CCR) 555

2 Operat., Maint., Plann., & Eng.-1 370
Issued for Bid

6 Maintenance Service Building 1 470
7 Maintenance Service Building-2 469
10-00914/302-0001
JO/EWO NO.

10 Process Interface Building-Train 100 571
DATE
05/27/10

14 Process Interface Building-Inlet & Outlet 550
REV
NO.
DRAWN 15 Process Interface Building-Power & Utilities 500

DATE 16 Process Interface Building-Cogen 510
CHECKED 17 Process Interface Building-SRU 1 & SRU 2 552
BY
DATE
18 Process Interface Building-SRU 3 & SRU 4 554
19 Process Interface Building-1Sulphur Handling 580
20 Process Interface Building - Inlet & Outlet - NGL 570
DISCIPLINE
ENGINEER 21 230kV Main Substation 200
DATE 22 Utilities Plant Substation 210
PROJECT 23 13.kV Distribution Substation-1 220
ENGINEER
24 Utilities Plant Substation 230
DATE
25 13.kV Distribution Substation-2 240
CERTIFIED 26 Sulfur Plant Substation 250
DATE 27 13.8/4.16/0.48kV Train-100 Substation 261
CONSTRUCTION
28 13.8/4.16/0.48kV Train-200 Substation 262
AGENCY
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Building
CERT
# Building #
ZHK
ENG’G
31 NGL Fractionation Substation 270

RJV
32 Operator/Supervisor Shelter-1 390

34 Operator/Supervisor Shelter-3 OSOS 3
35 Operator/Supervisor Shelter-4 OSOS 4
DESCRIPTION

Issued for Bid
3.8 Dispatcher Console
Two switch-based, IP capable Dispatch Consoles that are based on EADS
technology or equivalent shall be installed: one in the Control Room and
one in the Disaster Control Center. Dedicated dispatch personnel will be
10-00914/302-0001
JO/EWO NO.
assigned at both locations to monitor the system. A console shall consist

and not limited to the following components:
Industrial standard multimedia PC platform
Touch screen display
DATE
05/27/10
Keyboard, Mouse
Table Microphone
REV
NO.
DRAWN Table Push-to-talk switch

DATE
Foot Push-to-talk switch
CHECKED
BY External Speaker
DATE
Headset
DISCIPLINE Smart Card Reader Access
ENGINEER
DATE Select and Unselect Speakers

PROJECT Windows Operating System
ENGINEER
DATE
Ethernet 10/100 Mbit Interface, RJ 45 Connector
CERTIFIED
4 USB 2.0 ports, 9 pin serial, parallel ports
DATE One Gigabyte RAM
CONSTRUCTION 250 Gigabyte Internal Hard Drive, 7200 RPM
AGENCY
DATE
CD-RW/DVD Combo Drive
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Dispatcher Consoles shall have the following minimum functions:

CERT
ZHK
Place and receive individual and group calls in voice and data
communication modes
ENG’G
RJV
Create, modify, and delete radio subscribers and groups; modify their
call rights and attributes
Create and modify network parameters
Display activity log windows (on the monitor) for every call activity.
Display the corresponding talk-group, radio aliases, call type, and time
DESCRIPTION
of day
Setup a minimum of 10 connections involving PSTN users in a non-
Issued for Bid
blocking configuration
Call other Dispatcher Console operators
Access conventional external networks
10-00914/302-0001
Identify all emergency calls

JO/EWO NO.
Track and identify status of all users whenever they log-onto the
system and display a time-stamp
Contractor shall provide the required Ethernet Switches or equivalent
hardware for Controller to Console fiber optic communications between the
DATE
05/27/10
MTER and CCR.

REV
NO.
3.9 Logging Recorder

0
DRAWN
DATE A digital logging recorder will be provided at Ras Tanura SCN by BI-10-
CHECKED 00112.
BY
DATE
Contractor shall upgrade the logging recorder and provide licenses as
required to accommodate the Wasit Gas Plant traffic requirements.
DISCIPLINE
ENGINEER
DATE
3.10 Radio Specifications
PROJECT All radios shall feature the following:

ENGINEER
DATE
Conventional Operation
CERTIFIED Repeater Talk Around
DATE Operator Emergency/Alert
CONSTRUCTION
AGENCY
Individual Call
DATE Group Call
OPERATIONS Call to public network and emergency
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Radios shall be intrinsically safe, based on the EADS TETRA systems or

equivalent.
CERT
ZHK
3.10.1 Fixed Desktop Radios

ENG’G
RJV
8 fixed desktop radio workstations will be installed: 7 at the CCR Operator

Consoles, and 1 at the Fire Station.
The fixed desktop radios shall have the following minimum features:
DESCRIPTION
Frequency Range 410-430 MHz in Trunked Mode

406-430 MHz in Conventional Mode
Programmable
Issued for Bid
Channel Spacing 25 kHz
Channel Bandwidth 25 kHz
Frequency Stability ±0.0002%
10-00914/302-0001
JO/EWO NO.
Modulation π/4 DQPSK

Input Voltage/Frequency 110 – 220 VAC, 50-60 Hz
Transmit Power Minimum of 10 W with adaptive power
control
DATE
05/27/10
Receiver Static Sensitivity -112 dBm (4% BER) or better

REV
Radio Mounting Table top installation

NO.
DRAWN
DATE
Coax Cable, flexible, 12.5 mm (1/2”) low loss foam dielectric (50 ohm),
N-type connectors complete with hanging hardware
CHECKED
BY Channel Scan Capable

DATE
Alphanumeric Display
DISCIPLINE DTMF Keypad (back-lit)
ENGINEER
DATE External Speaker 7 Watt

PROJECT Audio Distortion < 5%
ENGINEER
DATE
Detachable Microphone with coil cord
CERTIFIED
Tone Coded Squelch (Programmable)
DATE Temperature Range Operation -20°C to +55°C
CONSTRUCTION Storage -30°C to +70°C
AGENCY
DATE
Relative Humidity 10% to 95% at 50°C, non-condensing
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
3.10.2 Vehicle-Mounted Mobile Radios

CERT
ZHK
A total of 23 vehicle-mounted mobile radios shall be provided. The vehicle-

ENG’G
mounted mobile radios are multi-channel, compact in size, fully

RJV
synthesized, supplied with visual alphanumeric display and all required

mounting hardware for a complete installation with mobile vehicles. Radios
include all controls, accessories, inter-cabling, antenna, and radio
mounting adapter.
DESCRIPTION
The vehicle-mounted mobile radios shall have the following minimum

features:
Issued for Bid
406-430 MHz in Conventional Mode Programmable
10-00914/302-0001
JO/EWO NO.

Modulation π/4 DQPSK
Input Power 13.8 VDC ± 10% at 3 Amp
DATE
05/27/10
Transmit Power Minimum of 10 W with adaptive power

control
REV
NO.
Receiver Static Sensitivity -112 dBm (4% BER)

0
DRAWN
DATE
Receiver Dynamic Sensitivity -103 dBm (4% BER)
CHECKED Radio Mounting Dash or Trunk Mounted
BY
DATE Antenna Vehicle Mounted for optimum radio
signal
DISCIPLINE
ENGINEER
Antenna Gain 5 dBi minimum
DATE Coax Cable, 3 m long flexible, 12.5 mm (1/2”) low loss foam dielectric
PROJECT
(50 ohm), N-type connectors complete with hanging hardware
ENGINEER
Channel Scan Capable
DATE
CERTIFIED
DATE
DTMF Keypad (back-lit)
CONSTRUCTION
External Speaker 7 Watt
AGENCY
Audio Distortion < 5%
DATE
Detachable Noise Cancelling Microphone with coil cord, push-to-talk
OPERATIONS
button
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT

CERT
ZHK

ENG’G
RJV

Shock and Vibration EIA-603 or equivalent
3.10.3 Hand-held Radios

DESCRIPTION
A total of 61 hand-held mobile radios shall be provided. The portable hand-

held radios are fully synthesized, state-of-the art, rugged equipment.
Radios include visual channel displays on the front of the radio indicating
Issued for Bid
the current operating mode and an indication of low battery voltage. All
portable hand-helds are intrinsically safe radios and have heavy-duty
batteries.
10-00914/302-0001
The hand-held radios shall have the following minimum features:

JO/EWO NO.

406-430 MHz in Conventional Mode
Programmable
DATE
05/27/10

REV
NO.
DRAWN
DATE Modulation π/4 DQPSK
CHECKED
Transmit Power Minimum of 0.6 Watt with adaptive
BY
DATE power control of 3 steps of 5dB
Receiver Static Sensitivity -112 dBm (4% BER)
DISCIPLINE
ENGINEER Receiver Dynamic Sensitivity -103 dBm (4% BER)
DATE
Antenna High Gain Helical Type
PROJECT
ENGINEER One Battery Spare per radio
DATE
Battery Capacity ≥ 900mAh with 10/10/80 duty cycle for
CERTIFIED 8 hours of continual use
DATE Single rapid battery charger 110 – 220 VAC, 50-60 Hz with US type
CONSTRUCTION
plugs, 220 VAC European adapters in
AGENCY limited quantities
DATE
Charging time < 2.5 hrs
OPERATIONS
Channel Scan Capable
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
CERT
ZHK
DTMF Keypad (back-lit)

Audio Distortion <5%
ENG’G
RJV
Detachable Microphone with coil cord

Intrinsically Safe Conforms to:
NEC 505 Class I, Division I
DESCRIPTION
z Gas Groups C&D (Ethylene and Propane) and ATEX Class I,

Zone I
Issued for Bid
z Gas Groups IIb (Ethylene and Propane)

10-00914/302-0001

JO/EWO NO.
Shock and Vibration EIA-603 or equivalent

Rain MIL-STD 810E, Method 506.3,
Procedure I and II or equivalent
DATE
Salt Fog MIL-STD 810E, Method 509.3,

05/27/10
Procedure I, or IEC529 IP54

REV
Sand and Dust MIL-STD 810E, Method 510.3,

NO.
DRAWN Procedure I
DATE
Compact, rugged, and lightweight
CHECKED
BY Dimensions Nominal 165 x 62 x 48 mm with battery

DATE
or smaller
DISCIPLINE 3.11 System Monitoring

ENGINEER
DATE
Radio System is to provide a monitoring feature of all system equipment
PROJECT status.
ENGINEER
DATE
4.0 INSTALLATION
CERTIFIED
DATE
4.1 General
CONSTRUCTION
AGENCY
Contractor shall install all equipment required by this specification to
produce a fully functioning system ready for handover to Saudi Aramco.
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Fully trained personnel who are familiar with the systems, equipment and
installation techniques, shall carry out the installation.
CERT
ZHK
Installation work shall be performed in a workmanlike manner, using best

ENG’G
RJV
practice methodology and adhering to the requirements of Saudi Aramco

Standards.
Equipment, materials, devices and facilities shall meet the following

minimum requirements:
DESCRIPTION
Manufactured by experienced manufacturers of the specific

components and facilities
Design shall minimize the requirement for field repair or maintenance
Issued for Bid
Modular design
Internal or self-diagnostics for component failures
Maintainable on a unit basis without affecting the ongoing operation of
10-00914/302-0001
JO/EWO NO.
the balance of other systems

Modular components, test ports and cable terminations shall be
accessible
Damage caused by the failure of one component shall be limited to the
DATE
05/27/10
component that has failed, without affecting the ongoing operation of

the overall system.
REV
NO.
Equipment, devices and enclosures in open accessible and process areas

0
DRAWN
shall be secured with tamper proof fasteners.
DATE
CHECKED
Contractor shall verify the mounting locations with Saudi Aramco prior to
BY
DATE installation. Contractor shall notify Saudi Aramco if a particular location is
not suitable for the application.
DISCIPLINE
ENGINEER Contractor shall label each wire and cable on each end indicating the wire
DATE designation that appears in the System Design Manual and/or wiring and
cabling schedule. The labeling shall be identical in nomenclature and all
PROJECT
ENGINEER labels shall be typed and covered with transparent heat-shrinkable tubing.
DATE
Contractor shall neatly arrange all cable on cable ladder rack, cable tray,
CERTIFIED
or supports and prevent twisting and unnecessary crossover of cables. All
DATE signal cables and wiring shall be secured with lace twine or, in isolated
CONSTRUCTION
cases, tie wraps.
AGENCY
DATE Where necessary, the installation shall include the integration of the
OPERATIONS
equipment being supplied into an existing system.
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Electromagnetic shielding and filtering shall be installed on all coaxial

cables.
CERT
ZHK
Contractor shall provide concise installation records for maintenance and

ENG’G
RJV
future trouble shooting purposes.
4.2 Safety and Security Requirement
Saudi Aramco places a very high onus upon all of its employees and its
contractors and their staff to conduct their business with safety and
DESCRIPTION
security as paramount considerations.
Ensure safety rail for climbing and maintenance operations, complete with
Issued for Bid
climbing harness are included.
The equipment supplied shall operate without creating a hazard to the user
directly and/or other third parties.
10-00914/302-0001
JO/EWO NO.
Hazard warning labels shall be affixed to the equipment to advise of any

feature of the equipment that may cause potential injury to the user or
maintenance personnel.
Maintenance manuals and other documentation must highlight any

DATE
05/27/10
potential dangers that may be encountered during the servicing or repair of

the equipment.
REV
NO.
DRAWN
DATE
Contractor shall perform all activities in accordance with Saudi Aramco
safe working procedures.
CHECKED
BY
DATE Contractors shall fully comply with the statutory requirements of the Saudi
Arabian Government Supreme Commission for Industrial Security, Safety
DISCIPLINE
and Security Directives pertaining to communications sites.
ENGINEER
DATE Contractor staff shall obtain clearance to gain entry to all sites and carry
PROJECT
suitable identification at all times.
ENGINEER
DATE Many of the Saudi Aramco communications systems are regarded as

critical. Contractor shall take all precautions to avoid disruption to traffic.
CERTIFIED
DATE
4.3 Material Included
CONSTRUCTION
AGENCY Contractor shall provide all necessary equipment and installation materials
DATE necessary for a fully functioning system. This may include, but is not
OPERATIONS
limited to the following items:
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Equipment mounting racks, shelves, or brackets

CERT
ZHK
Antennae with mounting brackets

Rack wiring, inter-equipment wiring and inter-rack wiring
ENG’G
RJV
Jack fields, panels and terminal blocks

Building cabling, power supply cabling, signal cabling
Patch cords and cable
Cable trays, cable racks, and conduits
DESCRIPTION
Signal and power receptacles/outlets

Fixings and fasteners
Issued for Bid
Equipment and cable identification labels

An equipment safety and signal grounding system and the connection
of the equipment to it, or connection to an existing system
10-00914/302-0001
JO/EWO NO.
4.4 Plant Tagging
Contractor is responsible for labeling all cables with cable markers

provided by Saudi Aramco.
DATE
05/27/10
Cable markers will be assigned by Saudi Aramco and shall be affixed by

Contractor.
REV
NO.
DRAWN Verification of cable marking shall be carried out as part of the Mechanical
DATE Completion inspection.
CHECKED
BY
DATE
5.0 INSPECTION AND TESTING
5.1 General
DISCIPLINE
ENGINEER
DATE
Contractor shall develop a system test plan, test schedule, and test
procedures for each of the following test activities.
PROJECT
ENGINEER
Contractor shall be responsible for ensuring conformance to
DATE
specification(s) and standards. Completion of inspections shall not relieve
CERTIFIED Contractor of the ultimate responsibility for equipment conformance.
DATE Inspection and testing requirements shall be in accordance with all
relevant Saudi Aramco inspection requirements and the applicable
CONSTRUCTION
AGENCY specifications, to the relevant sections of this specification and the data
DATE
sheets.
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Contractor shall be responsible for coordinating the inspection and testing

of all supplied equipment. Contractor shall ensure that Saudi Aramco
CERT
ZHK
representatives are given the necessary access for inspection, and

adequate warning of inspection and witness tests.
ENG’G
RJV
The system test plans, schedules, and procedures shall be provided to

Saudi Aramco Industrial Security Operations for review and approval prior
to conducting the tests. The test plan/procedure shall be submitted to
Saudi Aramco no later than 16 weeks before the test date.
DESCRIPTION
Contractor shall inspect the equipment for compliance with:

Approved for construction drawings, latest revision
Issued for Bid
Requirements of the requisition and agreed correspondence thereafter

Applicable standards, which shall also include the sub-referenced
standards herein and specifications
10-00914/302-0001
Test and inspection plans produced by, and as part of, the Quality Plan
JO/EWO NO.
All measuring instruments required for shop testing shall be supported by

valid calibration certification.
DATE
05/27/10
All spare parts shall be subject to the same inspection standards and full
material certification as the main Radio system order.
REV
NO.
DRAWN Contractor shall give a minimum of 30 working days notice prior to carrying
DATE out any tests on the equipment covered by this specification.
CHECKED
BY Representatives of Saudi Aramco must witness all test activities.

DATE
5.2 QA/QC Requirements

DISCIPLINE
ENGINEER
Contractor shall operate a Quality System in accordance with Contract
DATE
Schedule ‘Q’.
PROJECT
ENGINEER
All equipment, the principal manufacturing steps, type of inspection/test,
DATE
the controlling procedure, and the acceptance standard shall be defined in
CERTIFIED an Inspection and Test Plan (ITP). The ITP shall include a space for
DATE
Contractor/Saudi Aramco to advise inspection, Hold/Witness points, and
whether the inspection shall be by Contractor, third party, or Saudi
CONSTRUCTION
AGENCY
Aramco.
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Contractor may use their standard format ITP, provided the content
includes (and references) the information and all requirements of the Saudi
CERT
ZHK
Aramco Form 175.

ENG’G
RJV
5.3 Commissioning
Contractor is ultimately responsible for delivering a fully functional system

that meets all the requirements of this specification and all applicable
standards. The commissioning process demonstrates this to Saudi
Aramco before handing over the system.
DESCRIPTION
The process of system commissioning shall consist of a number of

different activities, culminating in the acceptance of the operational system
Issued for Bid
by Saudi Aramco.
Any piece of equipment, device, or material shall be made available for
inspections or tests, as deemed necessary by Saudi Aramco. Use of the
10-00914/302-0001
equipment, devices or material shall not imply acceptance of the system or

JO/EWO NO.
acceptability of any component. Availability and demonstration of the

systems shall not be withheld, and the use of components shall not imply
the start of the Warranty Period.
Contractor shall make available all necessary testing equipment such as

DATE
05/27/10
calibrated instruments, platforms and ladders, as necessary to

satisfactorily demonstrate the acceptability of the components and
REV
NO.
systems. Instrumentation to be used for testing shall be calibrated or

0
DRAWN
DATE
supplied by an approved laboratory or manufacturer.
CHECKED
Contractor shall make available all necessary personnel required to carry
BY
DATE out the commissioning and acceptance testing.
DISCIPLINE
Installation, engineering, software and system personnel shall be available
ENGINEER on-site during any testing carried out under this section. Such personnel
DATE shall be familiar with the installation and function of the Radio TETRA
PROJECT
system, and shall undertake all tests as requested, in order to verify that
ENGINEER the Radio system components individually and as a whole, meet the
DATE specifications.
CERTIFIED
5.4 Factory Acceptance Testing (FAT)
DATE
CONSTRUCTION
Factory Acceptance Testing (FAT) shall demonstrate that the Radio
AGENCY system meets the functional and operational requirements established in
DATE this specification. FAT procedures shall be issued for Saudi Aramco
OPERATIONS
CE&TSD approval four (4) months prior to FAT.
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
System hardware and software components shall be tested in-factory prior

to shipment and shall be witnessed by Wireless Engineering Group
CERT
ZHK
representative of CE&TSD to ensure system compliance and performance

with Saudi Aramco and TETRA standards
ENG’G
RJV
Contractor shall provide documentation (test reports) and certification of

Factory Acceptance Testing. All test failures, discrepancies, and issues
resulting from FAT shall be resolved prior to shipment of the system.
FAT shall include and demonstrate the following:
DESCRIPTION
Functionality of all radio devices

Functionality of all system devices
Issued for Bid
Operation of a radio under trunked mode and conventional mode
5.5 Field Testing
10-00914/302-0001
JO/EWO NO.
Field Functional Testing of system components shall be conducted during

the installation.
Test procedures shall contain as a minimum:

Type of test (i.e. RF Transmit and Received Signal Strength
DATE
05/27/10
Indications, Frequency measurements, Interference Analysis, etc…)

Name of systems’ equipment or system to be tested
REV
NO.
DRAWN
System and equipment configuration
DATE
CHECKED
Parameters to test (shall conform to applicable ITU-G
BY
recommendations
DATE
Test conditions
DISCIPLINE List of required test equipment and materials
ENGINEER
DATE
Explanation and diagrams of the test set-up
PROJECT
Pass/fail criteria for each test
ENGINEER
Test record forms for each test
DATE
CERTIFIED 5.6 Site Acceptance Testing

DATE
Site Acceptance Testing (SAT) shall be conducted on-site after Radio
CONSTRUCTION
AGENCY
system installation, operation and completion of three (3) month "burn-in”
period.
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
A representative of Saudi Aramco shall witness Radio Site Acceptance

Testing.
CERT
ZHK
Radio system shall be considered completed only by means of the SAT

ENG’G
RJV
approval, signed-off by Saudi Aramco Representative.
Contractor shall provide to Saudi Aramco, a test plan describing the

acceptance test procedures.
Acceptance testing shall at minimum include and demonstrate the
DESCRIPTION
following:
Voice and data communications between all radio devices and the
Wasit Gas Plant Base Station
Issued for Bid
Communications between any radio that falls inside the WASIT Gas
Plant coverage area (determined by the theoretical/field analysis) and
any radio on the Saudi Aramco network including and not limited to the
Berri Gas Plant and Khursaniya Gas Plant
10-00914/302-0001
JO/EWO NO.
Group Calling
Emergency Calling
Conventional Mode Calling
Access to the Saudi Aramco PSTN by any radio user in the coverage
DATE
05/27/10
area
System control, configuration, management, and monitoring by a
REV
NO.
DRAWN Dispatcher Console Operator

DATE
System redundancy
CHECKED
BY
DATE
5.7 Hardware Component Testing
All Commercial-Of-The-Shelf (COTS) hardware components shall be

DISCIPLINE
ENGINEER tested in-plant for proper function prior to shipment.
DATE
Contractor shall provide documentation of hardware performance testing.
PROJECT
ENGINEER
5.8 Software Verification Testing
DATE
CERTIFIED All COTS software shall be verified in-plant for proper function prior to
DATE shipment.
CONSTRUCTION
AGENCY Contractor shall provide documentation of software verification testing.
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
5.9 Mechanical Completion Certificate (MCC)

CERT
ZHK
Mechanical completion is the acceptance that the physical installation

ENG’G
conforms to Saudi Aramco standards, and that all required equipment has
RJV
been provided and is plant tagged.
Saudi Aramco inspection shall take place in the presence of Contractor.

The inspector shall prepare an exception list, detailing all violations of the
standards.
DESCRIPTION
Failure to identify any error or omission during inspections made in the

installation phase, shall not relieve the Contractor of any of the
Issued for Bid
specification requirements.
Once the “Yes” exception list is cleared, the Mechanical Completion
Certificate can be issued and the Commissioning can proceed to the Site
10-00914/302-0001
Acceptance Test.
JO/EWO NO.
The Radio system MCC shall be considered complete only when the SAT
approval has been signed-off by a Saudi Aramco representative.
DATE
5.10 Performance Acceptance Testing (PAT)

05/27/10
Performance Acceptance Tests, as specified in Saudi Aramco General

REV
NO.
Instruction 2.710, shall be passed prior to formal handover of the system.

0
DRAWN
DATE
Contractor obligations (Material and Non-material) shall be considered
CHECKED
fulfilled only by means of the Performance Acceptance Test (PAT)
BY
DATE approval, signed-off by Saudi Aramco.
Contractor shall carry out the PAT in the presence of Saudi Aramco
DISCIPLINE
ENGINEER personnel, who will certify the acceptance of the system on a test-by-test
DATE basis.
PROJECT
ENGINEER Contractor shall guarantee performance of the supplied equipment in
DATE accordance with the requirements of the Radio system and Tower FSD. If
the required performance is not achieved, Contractor shall implement all
CERTIFIED
required modifications at his expense.
DATE
CONSTRUCTION 6.0 DOCUMENTATION

AGENCY
DATE As a minimum, the following documents and drawings shall be provided for
OPERATIONS
SLI review:
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29
WASIT GAS PROGRAM
PMT
Equipment lists indicating manufacturer, type, part numbers, tag

numbers
CERT
ZHK
Data sheets for all system components

ENG’G
RJV
Wiring and interconnection diagrams

Instructions, configurations, and maintenance manuals
Installation details
Contractor shall submit a complete set of manufacturer books, in electronic
DESCRIPTION
and hardcopy, in the quantities and formats specified in purchase order

document list.
Issued for Bid
As a minimum, the books shall include the final revision of the above listed
documents.
6.1 Drawings
10-00914/302-0001
JO/EWO NO.
Complete drawing packages shall be provided. Information contained in

these drawings will be used to update purchaser's drawings.
6.2 System Drawings

DATE
System wiring schematic shall be provided showing all major components.

05/27/10
6.3 Rack Face Elevation (RFE) Drawings

REV
NO.
DRAWN
RFE drawings shall be provided for each bay. All major components shall
DATE
be shown including module and part numbers.
CHECKED
BY
DATE 6.4 As-Built Drawings
Red-lined drawings shall be provided during construction and as-built

DISCIPLINE
ENGINEER drawing shall be submitted prior to project completion.
DATE
6.5 Installation Drawings
PROJECT
ENGINEER
Installation drawings shall be provided for all equipment bays.
DATE
CERTIFIED 6.6 Manuals

DATE
The following shall be included in the System Design Manual: Instruction,
CONSTRUCTION
AGENCY
operation, and installation manuals shall be provided for all equipment.
DATE
OPERATIONS
DATE
THIS DOCUMENT IS
FOR
0
UNTIL CERTIFIED of
AND DATED. 29

FSD - Mobile Radio System

Uploaded by

Copyright:

Available Formats

FSD - Mobile Radio System

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FSD - Mobile Radio System

Uploaded by

Copyright:

Available Formats

OPRNS SAUDI ARABIAN OIL COMPANY

WASIT GAS PROGRAM

2.0 SYSTEM DESCRIPTION........................................................................................ 6

2.2.1 Base Station ............................................................................................................ 6

3.0 FUNCTIONAL REQUIREMENTS........................................................................... 8

3.1 Coverage and Interference Analysis ....................................................................... 8

3.6 Network Management System .............................................................................. 10

5.5 Field Testing.......................................................................................................... 26

5.7 Hardware Component Testing .............................................................................. 27

5.9 Mechanical Completion Certificate (MCC) ............................................................ 28

6.3 Rack Face Elevation (RFE) Drawings................................................................... 29

This Functional Specification Document (FSD) describes the requirements

The Permanent Communications ‘Contractor’ shall design, supply, install,

consist of the following and not limited to the following:

 RF distribution system (transmitter combiner, receiver multicoupler,

 22 vehicle-mounted radios: 5 for Operations, 10 for Fire, 5 for Security,

1.2 Site and Ambient Conditions

The project specific ambient conditions shall be based climatic condition of

Khursaniyah as per SAES-A-112 Saudi Aramco metrological and seismic

1.3 Industry Codes and Standards

most recent revisions of the Saudi Aramco and International Standards

SAES-A-105 Noise Control

SAEP-1634 Factory Acceptance Test

DRAWN ETSI 300392-2 Air Interface Standard

2.0 SYSTEM DESCRIPTION

2.1 Operating Philosophy

Radio System is to provide flexible and effective two-way mobile voice

Mobile radio system shall be based on TETRA technology. This

technology offers efficient use of spectrum operating in the 410-430 MHz

the system is down.

calls using their radios.

to the Ras Tanura Switching and Control Node (SCN).

2.2 System Architecture and Overview

terminals, external conventional channels, logging recorders, and the

network being deployed by BI-10-00112 via the TETRA SCN in Ras

2.2.3 End Users and Talk-groups

hand-held, vehicle-mounted, or a fixed desktop radio will belong to a Talk-

on top of the respective buildings.

Contractor shall provide the hand-held, vehicle-mounted, and fixed radios

3.0 FUNCTIONAL REQUIREMENTS

3.1 Coverage and Interference Analysis

The contractor shall provide a detailed Radio Frequency (RF) coverage

measuring method specified by ITU-T standard P.862 within the plant

power, and RF distribution system parameters of the Base Station and

Department/WEG for study verification and recommendations. Preliminary

3.2 Transmitter Noise and Desensitization Analysis

Contractor shall perform Transmitter Noise and Receiver Desensitization

analysis to confirm that the antenna system provides sufficient isolation

and will not cause transmitter and receiver performance degradation. If

3.3 Traffic Analysis

If the required Grade of Service (GoS) could not be achieved, Contractor

3.4 Operating Frequencies and Bandwidth

3.6 Network Management System

Network Management System will be provided by BI-10-00112. System

 Diagnose network faults

3.7 Base Station Specifications

Base Station shall be designed according to the TETRA Standards.

be based on the EADS TETRA system or equivalent.

Base Station shall operate in:

DRAWN  Normal Trunked Mode where it is controlled by and reports to Ras

RF distribution system (transmitter combiner, receiver multicoupler,

22 vehicle-mounted radios: 5 for Operations, 10 for Fire, 5 for Security,

Diagnose network faults

DRAWN Normal Trunked Mode where it is controlled by and reports to Ras

Frequency Range: 410-430 MHz

Channel Bandwidth: 25 kHz

Duty Cycle: 100%

Temperature Range Operation: -20°C to +55°C

DATE Windows operating system

Transmission coaxial cables

Frequency Range: 410-430 MHz

Gain: 8 dBd or as required

DATE Rated Wind Velocity: 270 km/hr

Maximum Insertion Loss: 3.5 dB

DATE Input Power: -48 VDC

Relative Humidity: 10% to 95% at 50°C, non-condensing

DRAWN Table Push-to-talk switch

DATE Select and Unselect Speakers

Identify all emergency calls

Frequency Range 410-430 MHz in Trunked Mode

Channel Spacing 25 kHz

Modulation π/4 DQPSK

Receiver Static Sensitivity -112 dBm (4% BER) or better

Radio Mounting Table top installation

BY Channel Scan Capable

DATE External Speaker 7 Watt

406-430 MHz in Conventional Mode Programmable

Frequency Stability ±0.0002%

Transmit Power Minimum of 10 W with adaptive power

Receiver Static Sensitivity -112 dBm (4% BER)

Tone Coded Squelch (Programmable)