https://www.phoenixcontact.

com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

Fuse modular terminal block, Connection method: Screw connection, Cross section: 0.14 mm²- 6 mm²,
AWG: 26 - 10, Nominal current: 6.3 A, Nominal voltage: 500 V, Width: 6.2 mm, Fuse type: G / 5 x 20, Fuse
type: Glass / ceramics / ..., Mounting type: NS 35/7,5, NS 35/15, Color: black

Product Features
■ An extremely compact design

■ Test connection on both sides in safety lever

■ Tested for railway applications

Key Commercial Data

Packing unit 1 pc
Weight per Piece (excluding packing) 17.496 g
Country of origin Germany

Technical data
General
Number of levels 1
Number of connections 2
Nominal cross section 4 mm²
Color black
Insulating material PA
Flammability rating according to UL 94 V0
Area of application Railway industry
Machine building
Plant engineering
Fuse G / 5 x 20
Fuse type Glass / ceramics / ...
Rated surge voltage 6 kV

06/16/2016   Page 1 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Technical data
General
Degree of pollution 3
Overvoltage category III
Insulating material group I
max. 1.6 W (With single arrangement of the fuse terminal block in the
Maximum power dissipation
event of overload)
Connection in acc. with standard IEC 60947-7-3
Maximum load current 10 A (the current is determined by the fuse used)
Nominal current IN 6.3 A
Nominal voltage UN 500 V (As a fuse terminal block)
Open side panel No
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Oscillation, broadband noise test result Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum Service life test category 1, class B, body mounted
Test frequency f1 = 5 Hz to f2 = 150 Hz

ASD level 2 2
1.857 (m/s ) /Hz
Acceleration 0,8 g
Test duration per axis 5h
Test directions X-, Y- and Z-axis
Shock test result Test passed
Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
Shock form Semi-sinusoidal
Acceleration 5g
Shock duration 30 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C

Dimensions
Width 6.2 mm
Length 57.8 mm
Height NS 35/7,5 73 mm
Height NS 35/15 80.5 mm

06/16/2016   Page 2 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Technical data
Connection data
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 6 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 10
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
2 conductors with same cross section, solid min. 0.14 mm²
2 conductors with same cross section, solid max. 1.5 mm²
2 conductors with same cross section, stranded min. 0.14 mm²
2 conductors with same cross section, stranded max. 1.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
0.14 mm²
sleeve, min.
2 conductors with same cross section, stranded, ferrules without plastic
1.5 mm²
sleeve, max.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
2.5 mm²
sleeve, max.
Connection method Screw connection
Stripping length 9 mm
Internal cylindrical gage A4
Screw thread M3
Tightening torque, min 0.6 Nm
Tightening torque max 0.8 Nm

Standards and Regulations

Connection in acc. with standard CSA
IEC 60947-7-3
Flammability rating according to UL 94 V0

Classifications
eCl@ss

eCl@ss 4.0 27141116

eCl@ss 4.1 27141116

06/16/2016   Page 3 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Classifications
eCl@ss
eCl@ss 5.0 27141116
eCl@ss 5.1 27141116
eCl@ss 6.0 27141116
eCl@ss 7.0 27141116
eCl@ss 8.0 27141116
eCl@ss 9.0 27141116

ETIM

ETIM 2.0 EC000897

ETIM 3.0 EC000899
ETIM 4.0 EC000899
ETIM 5.0 EC000899

UNSPSC

UNSPSC 6.01 30211811

UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410

Approvals
Approvals

Approvals

CSA / UL Recognized / KEMA-KEUR / cUL Recognized / LR / GL / RS / IECEE CB Scheme / VDE Zeichengenehmigung / DNV / IECEE CB Scheme /
EAC / cULus Recognized

Ex Approvals

Approvals submitted

Approval details

06/16/2016   Page 4 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Approvals

CSA 
  B C
mm²/AWG/kcmil 26-10 26-10
Nominal current IN 6.3 A 6.3 A
Nominal voltage UN 600 V 600 V

UL Recognized 
  B C
mm²/AWG/kcmil 26-10 26-10
Nominal current IN 6.3 A 6.3 A
Nominal voltage UN 600 V 600 V

KEMA-KEUR 
   
mm²/AWG/kcmil 0.14-4
Nominal current IN 6.3 A
Nominal voltage UN 250 V

cUL Recognized 
  B C
mm²/AWG/kcmil 26-10 26-10
Nominal current IN 6.3 A 6.3 A
Nominal voltage UN 600 V 600 V

LR 

GL 

RS 

06/16/2016   Page 5 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Approvals

IECEE CB Scheme 
   
mm²/AWG/kcmil 4
Nominal voltage UN 250 V

VDE Zeichengenehmigung 
   
mm²/AWG/kcmil 4
Nominal voltage UN 250 V

DNV 

IECEE CB Scheme 
   
mm²/AWG/kcmil 0.14-4
Nominal current IN 6.3 A
Nominal voltage UN 250 V

EAC 

cULus Recognized 

Accessories
Accessories
Bridge

06/16/2016   Page 6 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Connection pin - VS - 3004207

Connection pin, Length: 1000 mm, Color: gray

 
 

DIN rail

DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
 
 

DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681

DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
 
 

DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119

DIN rail 35 mm (NS 35)

 
 

DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122

DIN rail 35 mm (NS 35)

 
 

06/16/2016   Page 7 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704

DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
 
 

DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421

DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
 
 

DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
 
 

DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762

DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
 
 

End cap - NS 35/ 7,5 CAP - 1206560

DIN rail end piece, for DIN rail NS 35/7.5

 
 

06/16/2016   Page 8 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

DIN rail perforated - NS 35/15 PERF 2000MM - 1201730

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
 
 

DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714

DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
 
 

DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602

DIN rail 35 mm (NS 35)

 
 

DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135

DIN rail 35 mm (NS 35)

 
 

DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756

DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
 
 

06/16/2016   Page 9 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599

DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
 
 

DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586

DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
 
 

DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895

DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
 
 

End cap - NS 35/15 CAP - 1206573

DIN rail end piece, for DIN rail NS 35/15

 
 

DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798

DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
 
 

End block

06/16/2016   Page 10 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

End clamp - CLIPFIX 35 - 3022218

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
 
 

End clamp - CLIPFIX 35-5 - 3022276

Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
 
 

End clamp - E/NS 35 N - 0800886

End clamp, width: 9.5 mm, color: gray

 
 

Jumper

Plug-in bridge - FBS 2-6 - 3030336

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 10.7 mm, Number of positions: 2, Color: red
 
 

Plug-in bridge - FBS 3-6 - 3030242

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 16.9 mm, Number of positions: 3, Color: red
 
 

06/16/2016   Page 11 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Plug-in bridge - FBS 4-6 - 3030255

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 23.1 mm, Number of positions: 4, Color: red
 
 

Plug-in bridge - FBS 5-6 - 3030349

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 29.3 mm, Number of positions: 5, Color: red
 
 

Plug-in bridge - FBS 10-6 - 3030271

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 60.3 mm, Number of positions: 10, Color: red
 
 

Plug-in bridge - FBS 20-6 - 3030365

Plug-in bridge, Pitch: 6.2 mm, Length: 23 mm, Width: 122.3 mm, Number of positions: 20, Color: red
 
 

Plug-in bridge - FBS 50-6 - 3032224

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 50, Color: red

 
 

06/16/2016   Page 12 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Plug-in bridge - FBSR 2-6 - 3033715

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 2, Color: red

 
 

Plug-in bridge - FBSR 3-6 - 3001594

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 3, Color: red

 
 

Plug-in bridge - FBSR 4-6 - 3001595

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 4, Color: red

 
 

Plug-in bridge - FBSR 5-6 - 3001596

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 5, Color: red

 
 

Plug-in bridge - FBSR 10-6 - 3033716

Plug-in bridge, Pitch: 6.2 mm, Number of positions: 10, Color: red

 
 

Labeled terminal marker

06/16/2016   Page 13 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Zack marker strip - ZB 5 CUS - 0824962

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
 
 

Zack marker strip - ZB 5,LGS:FORTL.ZAHLEN - 1050017

Zack marker strip, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 - 500,
Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
 
 

Zack marker strip - ZB 5,QR:FORTL.ZAHLEN - 1050020

Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field:
5.15 x 10.5 mm
 
 

Zack marker strip - ZB 5,LGS:GLEICHE ZAHLEN - 1050033

Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up
to 100, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
 
 

Marker for terminal blocks - ZB 5,LGS:L1-N,PE - 1050415

Marker for terminal blocks, Strip, white, labeled, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap
into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
 
 

06/16/2016   Page 14 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Marker for terminal blocks - UC-TM 5 CUS - 0824581

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
 
 

Marker for terminal blocks - UCT-TM 5 CUS - 0829595

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, Lettering field: 4.6 x 10.5 mm
 
 

Zack marker strip - ZB 6 CUS - 0824992

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
 
 

Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016

Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
 
 

Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029

Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field:
6.15 x 10.5 mm
 
 

06/16/2016   Page 15 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032

Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up
to 100, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
 
 

Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414

Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
 
 

Marker for terminal blocks - ZB 6,LGS:U-N - 1051430

Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: U, V, W, N, GND, U, V,
W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
 
 

Marker for terminal blocks - UC-TM 6 CUS - 0824589

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
 
 

Marker for terminal blocks - UCT-TM 6 CUS - 0829602

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
 
 

Marker pen

06/16/2016   Page 16 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Marker pen - X-PEN 0,35 - 0811228

Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
 
 

Screwdriver tools

Screwdriver - SZS 0,6X3,5 - 1205053

Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
 
 

Switching jumper

Feed-through connector - DMET 5X20 - 3032075

Feed-through metal in the shape of a 5 x 20 mm glass tube fuse insert for use in fuse terminal blocks.
 
 

Terminal marking

Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm
 
 

06/16/2016   Page 17 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Accessories

Marker for terminal blocks - UC-TM 5 - 0818108

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Mounting
type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 10.5 x 4.6 mm
 
 

Marker for terminal blocks - UCT-TM 5 - 0828734

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm,
Lettering field: 4.6 x 10.5 mm
 
 

Zack marker strip - ZB 6:UNBEDRUCKT - 1051003

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
 
 

Marker for terminal blocks - UC-TM 6 - 0818085

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm
 
 

Marker for terminal blocks - UCT-TM 6 - 0828736

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm,
Lettering field: 5.6 x 10.5 mm
 
 

Drawings

06/16/2016   Page 18 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Circuit Application drawing
diagram

Fuse terminal blocks in interconnected arrangement,

block consisting of 5 fuse terminal blocks

06/16/2016   Page 19 / 20
https://www.phoenixcontact.com/us/products/3046032

Fuse modular terminal block - UT 4-HESI (5X20) - 3046032

Application drawing

Fuse terminal block in single arrangement,

block consisting of one fuse terminal block and 4 feed-through terminal blocks

Phoenix Contact 2016 © - all rights reserved

http://www.phoenixcontact.com

06/16/2016   Page 20 / 20